diff options
Diffstat (limited to 't/t6036-recursive-corner-cases.sh')
| -rwxr-xr-x | t/t6036-recursive-corner-cases.sh | 430 |
1 files changed, 411 insertions, 19 deletions
diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index e1cef58f2a..d23b948f27 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -64,15 +64,12 @@ test_expect_success 'merge simple rename+criss-cross with no modifications' ' git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >expect \ - L2:three R2:three \ L2:three R2:three && git rev-parse >actual \ :2:three :3:three && - git hash-object >>actual \ - three~HEAD three~R2^0 && test_cmp expect actual ) ' @@ -140,15 +137,12 @@ test_expect_success 'merge criss-cross + rename merges with basic modification' git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >expect \ - L2:three R2:three \ L2:three R2:three && git rev-parse >actual \ :2:three :3:three && - git hash-object >>actual \ - three~HEAD three~R2^0 && test_cmp expect actual ) ' @@ -185,7 +179,7 @@ test_expect_success 'setup differently handled merges of rename/add conflict' ' git branch B && git checkout -b C && echo 10 >>a && - echo "other content" >>new_a && + test_write_lines 0 1 2 3 4 5 6 7 foobar >new_a && git add a new_a && test_tick && git commit -m C && @@ -195,14 +189,14 @@ test_expect_success 'setup differently handled merges of rename/add conflict' ' git checkout B^0 && test_must_fail git merge C && - git clean -f && + git show :2:new_a >new_a && + git add new_a && test_tick && git commit -m D && git tag D && git checkout C^0 && test_must_fail git merge B && - rm new_a~HEAD new_a && - printf "Incorrectly merged content" >>new_a && + test_write_lines 0 1 2 3 4 5 6 7 bad_merge >new_a && git add -u && test_tick && git commit -m E && git tag E @@ -225,21 +219,74 @@ test_expect_success 'git detects differently handled merges conflict' ' test_line_count = 1 out && git rev-parse >expect \ - D:new_a E:new_a && + C:new_a D:new_a E:new_a && git rev-parse >actual \ - :2:new_a :3:new_a && + :1:new_a :2:new_a :3:new_a && test_cmp expect actual && - git cat-file -p C:new_a >ours && - git cat-file -p B:new_a >theirs && + # Test that the two-way merge in new_a is as expected + git cat-file -p D:new_a >ours && + git cat-file -p E:new_a >theirs && >empty && test_must_fail git merge-file \ - -L "Temporary merge branch 1" \ + -L "HEAD" \ -L "" \ - -L "Temporary merge branch 2" \ + -L "E^0" \ ours empty theirs && sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && - git cat-file -p :1:new_a >actual && + git hash-object new_a >actual && + git hash-object ours >expect && + test_cmp expect actual + ) +' + +# Repeat the above testcase with precisely the same setup, other than with +# the two merge bases having different orderings of commit timestamps so +# that they are reversed in the order they are provided to merge-recursive, +# so that we can improve code coverage. +test_expect_success 'git detects differently handled merges conflict, swapped' ' + ( + cd rename-add && + + # Difference #1: Do cleanup from previous testrun + git reset --hard && + git clean -fdqx && + + # Difference #2: Change commit timestamps + btime=$(git log --no-walk --date=raw --format=%cd B | awk "{print \$1}") && + ctime=$(git log --no-walk --date=raw --format=%cd C | awk "{print \$1}") && + newctime=$(($btime+1)) && + git fast-export --no-data --all | sed -e s/$ctime/$newctime/ | git fast-import --force --quiet && + # End of differences; rest is copy-paste of last test + + git checkout D^0 && + test_must_fail git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + C:new_a D:new_a E:new_a && + git rev-parse >actual \ + :1:new_a :2:new_a :3:new_a && + test_cmp expect actual && + + # Test that the two-way merge in new_a is as expected + git cat-file -p D:new_a >ours && + git cat-file -p E:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "E^0" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && + git hash-object new_a >actual && + git hash-object ours >expect && test_cmp expect actual ) ' @@ -1402,4 +1449,349 @@ test_expect_failure 'check conflicting modes for regular file' ' ) ' +# Setup: +# L1---L2 +# / \ / \ +# master X ? +# \ / \ / +# R1---R2 +# +# Where: +# master has two files, named 'b' and 'a' +# branches L1 and R1 both modify each of the two files in conflicting ways +# +# L2 is a merge of R1 into L1; more on it later. +# R2 is a merge of L1 into R1; more on it later. +# +# X is an auto-generated merge-base used when merging L2 and R2. +# since X is a merge of L1 and R1, it has conflicting versions of each file +# +# More about L2 and R2: +# - both resolve the conflicts in 'b' and 'a' differently +# - L2 renames 'b' to 'm' +# - R2 renames 'a' to 'm' +# +# In the end, in file 'm' we have four different conflicting files (from +# two versions of 'b' and two of 'a'). In addition, if +# merge.conflictstyle is diff3, then the base version also has +# conflict markers of its own, leading to a total of three levels of +# conflict markers. This is a pretty weird corner case, but we just want +# to ensure that we handle it as well as practical. + +test_expect_success 'setup nested conflicts' ' + test_create_repo nested_conflicts && + ( + cd nested_conflicts && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >initial && + + cp initial b_L1 && + cp initial b_R1 && + cp initial b_L2 && + cp initial b_R2 && + cp initial a_L1 && + cp initial a_R1 && + cp initial a_L2 && + cp initial a_R2 && + + test_write_lines b b_L1 >>b_L1 && + test_write_lines b b_R1 >>b_R1 && + test_write_lines b b_L2 >>b_L2 && + test_write_lines b b_R2 >>b_R2 && + test_write_lines a a_L1 >>a_L1 && + test_write_lines a a_R1 >>a_R1 && + test_write_lines a a_L2 >>a_L2 && + test_write_lines a a_R2 >>a_R2 && + + # Setup original commit (or merge-base), consisting of + # files named "b" and "a" + cp initial b && + cp initial a && + echo b >>b && + echo a >>a && + git add b a && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + mv -f b_L1 b && + mv -f a_L1 a && + git add b a && + test_tick && git commit -m "version L1 of files" && + git tag L1 && + + # Handle the right side + git checkout R && + mv -f b_R1 b && + mv -f a_R1 a && + git add b a && + test_tick && git commit -m "verson R1 of files" && + git tag R1 && + + # Create first merge on left side + git checkout L && + test_must_fail git merge R1 && + mv -f b_L2 b && + mv -f a_L2 a && + git add b a && + git mv b m && + test_tick && git commit -m "left merge, rename b->m" && + git tag L2 && + + # Create first merge on right side + git checkout R && + test_must_fail git merge L1 && + mv -f b_R2 b && + mv -f a_R2 a && + git add b a && + git mv a m && + test_tick && git commit -m "right merge, rename a->m" && + git tag R2 + ) +' + +test_expect_success 'check nested conflicts' ' + ( + cd nested_conflicts && + + git clean -f && + git checkout L2^0 && + + # Merge must fail; there is a conflict + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R2^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Create a and b from virtual merge base X + git cat-file -p master:a >base && + git cat-file -p L1:a >ours && + git cat-file -p R1:a >theirs && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + ours \ + base \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_a && + + git cat-file -p master:b >base && + git cat-file -p L1:b >ours && + git cat-file -p R1:b >theirs && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + ours \ + base \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_b && + + # Compare :2:m to expected values + git cat-file -p L2:m >ours && + git cat-file -p R2:b >theirs && + test_must_fail git merge-file --diff3 \ + -L "HEAD:m" \ + -L "merged common ancestors:b" \ + -L "R2^0:b" \ + ours \ + vmb_b \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >m_stage_2 && + git cat-file -p :2:m >actual && + test_cmp m_stage_2 actual && + + # Compare :3:m to expected values + git cat-file -p L2:a >ours && + git cat-file -p R2:m >theirs && + test_must_fail git merge-file --diff3 \ + -L "HEAD:a" \ + -L "merged common ancestors:a" \ + -L "R2^0:m" \ + ours \ + vmb_a \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >m_stage_3 && + git cat-file -p :3:m >actual && + test_cmp m_stage_3 actual && + + # Compare m to expected contents + >empty && + cp m_stage_2 expected_final_m && + test_must_fail git merge-file --diff3 \ + -L "HEAD" \ + -L "merged common ancestors" \ + -L "R2^0" \ + expected_final_m \ + empty \ + m_stage_3 && + test_cmp expected_final_m m + ) +' + +# Setup: +# L1---L2---L3 +# / \ / \ / \ +# master X1 X2 ? +# \ / \ / \ / +# R1---R2---R3 +# +# Where: +# master has one file named 'content' +# branches L1 and R1 both modify each of the two files in conflicting ways +# +# L<n> (n>1) is a merge of R<n-1> into L<n-1> +# R<n> (n>1) is a merge of L<n-1> into R<n-1> +# L<n> and R<n> resolve the conflicts differently. +# +# X<n> is an auto-generated merge-base used when merging L<n+1> and R<n+1>. +# By construction, X1 has conflict markers due to conflicting versions. +# X2, due to using merge.conflictstyle=3, has nested conflict markers. +# +# So, merging R3 into L3 using merge.conflictstyle=3 should show the +# nested conflict markers from X2 in the base version -- that means we +# have three levels of conflict markers. Can we distinguish all three? + +test_expect_success 'setup virtual merge base with nested conflicts' ' + test_create_repo virtual_merge_base_has_nested_conflicts && + ( + cd virtual_merge_base_has_nested_conflicts && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >content && + + # Setup original commit + git add content && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Create L1 + git checkout L && + echo left >>content && + git add content && + test_tick && git commit -m "version L1 of content" && + git tag L1 && + + # Create R1 + git checkout R && + echo right >>content && + git add content && + test_tick && git commit -m "verson R1 of content" && + git tag R1 && + + # Create L2 + git checkout L && + test_must_fail git -c merge.conflictstyle=diff3 merge R1 && + git checkout L1 content && + test_tick && git commit -m "version L2 of content" && + git tag L2 && + + # Create R2 + git checkout R && + test_must_fail git -c merge.conflictstyle=diff3 merge L1 && + git checkout R1 content && + test_tick && git commit -m "version R2 of content" && + git tag R2 && + + # Create L3 + git checkout L && + test_must_fail git -c merge.conflictstyle=diff3 merge R2 && + git checkout L1 content && + test_tick && git commit -m "version L3 of content" && + git tag L3 && + + # Create R3 + git checkout R && + test_must_fail git -c merge.conflictstyle=diff3 merge L2 && + git checkout R1 content && + test_tick && git commit -m "version R3 of content" && + git tag R3 + ) +' + +test_expect_success 'check virtual merge base with nested conflicts' ' + ( + cd virtual_merge_base_has_nested_conflicts && + + git checkout L3^0 && + + # Merge must fail; there is a conflict + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R3^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Compare :[23]:content to expected values + git rev-parse L1:content R1:content >expect && + git rev-parse :2:content :3:content >actual && + test_cmp expect actual && + + # Imitate X1 merge base, except without long enough conflict + # markers because a subsequent sed will modify them. Put + # result into vmb. + git cat-file -p master:content >base && + git cat-file -p L:content >left && + git cat-file -p R:content >right && + cp left merged-once && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + merged-once \ + base \ + right && + sed -e "s/^\([<|=>]\)/\1\1\1/" merged-once >vmb && + + # Imitate X2 merge base, overwriting vmb. Note that we + # extend both sets of conflict markers to make them longer + # with the sed command. + cp left merged-twice && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + merged-twice \ + vmb \ + right && + sed -e "s/^\([<|=>]\)/\1\1\1/" merged-twice >vmb && + + # Compare :1:content to expected value + git cat-file -p :1:content >actual && + test_cmp vmb actual && + + # Determine expected content in final outer merge, compare to + # what the merge generated. + cp -f left expect && + test_must_fail git merge-file --diff3 \ + -L "HEAD" -L "merged common ancestors" -L "R3^0" \ + expect vmb right && + test_cmp expect content + ) +' + test_done |