diff options
Diffstat (limited to 't/t6030-bisect-porcelain.sh')
| -rwxr-xr-x | t/t6030-bisect-porcelain.sh | 208 |
1 files changed, 200 insertions, 8 deletions
diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 0b81e65aa3..def397c53a 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -175,7 +175,7 @@ test_expect_success 'bisect skip: successfull result' ' git bisect start $HASH4 $HASH1 && git bisect skip && git bisect bad > my_bisect_log.txt && - grep "$HASH2 is first bad commit" my_bisect_log.txt && + grep "$HASH2 is the first bad commit" my_bisect_log.txt && git bisect reset ' @@ -261,7 +261,7 @@ test_expect_success \ git bisect good $HASH1 && git bisect bad $HASH4 && git bisect run ./test_script.sh > my_bisect_log.txt && - grep "$HASH3 is first bad commit" my_bisect_log.txt && + grep "$HASH3 is the first bad commit" my_bisect_log.txt && git bisect reset' # We want to automatically find the commit that @@ -274,7 +274,7 @@ test_expect_success \ chmod +x test_script.sh && git bisect start $HASH4 $HASH1 && git bisect run ./test_script.sh > my_bisect_log.txt && - grep "$HASH4 is first bad commit" my_bisect_log.txt && + grep "$HASH4 is the first bad commit" my_bisect_log.txt && git bisect reset' # $HASH1 is good, $HASH5 is bad, we skip $HASH3 @@ -287,14 +287,14 @@ test_expect_success 'bisect skip: add line and then a new test' ' git bisect start $HASH5 $HASH1 && git bisect skip && git bisect good > my_bisect_log.txt && - grep "$HASH5 is first bad commit" my_bisect_log.txt && + grep "$HASH5 is the first bad commit" my_bisect_log.txt && git bisect log > log_to_replay.txt && git bisect reset ' test_expect_success 'bisect skip and bisect replay' ' git bisect replay log_to_replay.txt > my_bisect_log.txt && - grep "$HASH5 is first bad commit" my_bisect_log.txt && + grep "$HASH5 is the first bad commit" my_bisect_log.txt && git bisect reset ' @@ -335,11 +335,28 @@ test_expect_success 'bisect run & skip: find first bad' ' chmod +x test_script.sh && git bisect start $HASH7 $HASH1 && git bisect run ./test_script.sh > my_bisect_log.txt && - grep "$HASH6 is first bad commit" my_bisect_log.txt + grep "$HASH6 is the first bad commit" my_bisect_log.txt ' -test_expect_success 'bisect starting with a detached HEAD' ' +test_expect_success 'bisect skip only one range' ' + git bisect reset && + git bisect start $HASH7 $HASH1 && + git bisect skip $HASH1..$HASH5 && + test "$HASH6" = "$(git rev-parse --verify HEAD)" && + test_must_fail git bisect bad > my_bisect_log.txt && + grep "first bad commit could be any of" my_bisect_log.txt +' + +test_expect_success 'bisect skip many ranges' ' + git bisect start $HASH7 $HASH1 && + test "$HASH4" = "$(git rev-parse --verify HEAD)" && + git bisect skip $HASH2 $HASH2.. ..$HASH5 && + test "$HASH6" = "$(git rev-parse --verify HEAD)" && + test_must_fail git bisect bad > my_bisect_log.txt && + grep "first bad commit could be any of" my_bisect_log.txt +' +test_expect_success 'bisect starting with a detached HEAD' ' git bisect reset && git checkout master^ && HEAD=$(git rev-parse --verify HEAD) && @@ -368,13 +385,188 @@ test_expect_success 'bisect does not create a "bisect" branch' ' rev_hash6=$(git rev-parse --verify HEAD) && test "$rev_hash6" = "$HASH6" && git bisect good > my_bisect_log.txt && - grep "$HASH7 is first bad commit" my_bisect_log.txt && + grep "$HASH7 is the first bad commit" my_bisect_log.txt && git bisect reset && rev_hash6=$(git rev-parse --verify bisect) && test "$rev_hash6" = "$HASH6" && git branch -D bisect ' +# This creates a "side" branch to test "siblings" cases. +# +# H1-H2-H3-H4-H5-H6-H7 <--other +# \ +# S5-S6-S7 <--side +# +test_expect_success 'side branch creation' ' + git bisect reset && + git checkout -b side $HASH4 && + add_line_into_file "5(side): first line on a side branch" hello2 && + SIDE_HASH5=$(git rev-parse --verify HEAD) && + add_line_into_file "6(side): second line on a side branch" hello2 && + SIDE_HASH6=$(git rev-parse --verify HEAD) && + add_line_into_file "7(side): third line on a side branch" hello2 && + SIDE_HASH7=$(git rev-parse --verify HEAD) +' + +test_expect_success 'good merge base when good and bad are siblings' ' + git bisect start "$HASH7" "$SIDE_HASH7" > my_bisect_log.txt && + grep "merge base must be tested" my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt && + git bisect good > my_bisect_log.txt && + test_must_fail grep "merge base must be tested" my_bisect_log.txt && + grep $HASH6 my_bisect_log.txt && + git bisect reset +' +test_expect_success 'skipped merge base when good and bad are siblings' ' + git bisect start "$SIDE_HASH7" "$HASH7" > my_bisect_log.txt && + grep "merge base must be tested" my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt && + git bisect skip > my_bisect_log.txt 2>&1 && + grep "Warning" my_bisect_log.txt && + grep $SIDE_HASH6 my_bisect_log.txt && + git bisect reset +' + +test_expect_success 'bad merge base when good and bad are siblings' ' + git bisect start "$HASH7" HEAD > my_bisect_log.txt && + grep "merge base must be tested" my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt && + test_must_fail git bisect bad > my_bisect_log.txt 2>&1 && + grep "merge base $HASH4 is bad" my_bisect_log.txt && + grep "fixed between $HASH4 and \[$SIDE_HASH7\]" my_bisect_log.txt && + git bisect reset +' + +# This creates a few more commits (A and B) to test "siblings" cases +# when a good and a bad rev have many merge bases. +# +# We should have the following: +# +# H1-H2-H3-H4-H5-H6-H7 +# \ \ \ +# S5-A \ +# \ \ +# S6-S7----B +# +# And there A and B have 2 merge bases (S5 and H5) that should be +# reported by "git merge-base --all A B". +# +test_expect_success 'many merge bases creation' ' + git checkout "$SIDE_HASH5" && + git merge -m "merge HASH5 and SIDE_HASH5" "$HASH5" && + A_HASH=$(git rev-parse --verify HEAD) && + git checkout side && + git merge -m "merge HASH7 and SIDE_HASH7" "$HASH7" && + B_HASH=$(git rev-parse --verify HEAD) && + git merge-base --all "$A_HASH" "$B_HASH" > merge_bases.txt && + test $(wc -l < merge_bases.txt) = "2" && + grep "$HASH5" merge_bases.txt && + grep "$SIDE_HASH5" merge_bases.txt +' + +test_expect_success 'good merge bases when good and bad are siblings' ' + git bisect start "$B_HASH" "$A_HASH" > my_bisect_log.txt && + grep "merge base must be tested" my_bisect_log.txt && + git bisect good > my_bisect_log2.txt && + grep "merge base must be tested" my_bisect_log2.txt && + { + { + grep "$SIDE_HASH5" my_bisect_log.txt && + grep "$HASH5" my_bisect_log2.txt + } || { + grep "$SIDE_HASH5" my_bisect_log2.txt && + grep "$HASH5" my_bisect_log.txt + } + } && + git bisect reset +' + +test_expect_success 'optimized merge base checks' ' + git bisect start "$HASH7" "$SIDE_HASH7" > my_bisect_log.txt && + grep "merge base must be tested" my_bisect_log.txt && + grep "$HASH4" my_bisect_log.txt && + git bisect good > my_bisect_log2.txt && + test -f ".git/BISECT_ANCESTORS_OK" && + test "$HASH6" = $(git rev-parse --verify HEAD) && + git bisect bad > my_bisect_log3.txt && + git bisect good "$A_HASH" > my_bisect_log4.txt && + grep "merge base must be tested" my_bisect_log4.txt && + test_must_fail test -f ".git/BISECT_ANCESTORS_OK" +' + +# This creates another side branch called "parallel" with some files +# in some directories, to test bisecting with paths. +# +# We should have the following: +# +# P1-P2-P3-P4-P5-P6-P7 +# / / / +# H1-H2-H3-H4-H5-H6-H7 +# \ \ \ +# S5-A \ +# \ \ +# S6-S7----B +# +test_expect_success '"parallel" side branch creation' ' + git bisect reset && + git checkout -b parallel $HASH1 && + mkdir dir1 dir2 && + add_line_into_file "1(para): line 1 on parallel branch" dir1/file1 && + PARA_HASH1=$(git rev-parse --verify HEAD) && + add_line_into_file "2(para): line 2 on parallel branch" dir2/file2 && + PARA_HASH2=$(git rev-parse --verify HEAD) && + add_line_into_file "3(para): line 3 on parallel branch" dir2/file3 && + PARA_HASH3=$(git rev-parse --verify HEAD) + git merge -m "merge HASH4 and PARA_HASH3" "$HASH4" && + PARA_HASH4=$(git rev-parse --verify HEAD) + add_line_into_file "5(para): add line on parallel branch" dir1/file1 && + PARA_HASH5=$(git rev-parse --verify HEAD) + add_line_into_file "6(para): add line on parallel branch" dir2/file2 && + PARA_HASH6=$(git rev-parse --verify HEAD) + git merge -m "merge HASH7 and PARA_HASH6" "$HASH7" && + PARA_HASH7=$(git rev-parse --verify HEAD) +' + +test_expect_success 'restricting bisection on one dir' ' + git bisect reset && + git bisect start HEAD $HASH1 -- dir1 && + para1=$(git rev-parse --verify HEAD) && + test "$para1" = "$PARA_HASH1" && + git bisect bad > my_bisect_log.txt && + grep "$PARA_HASH1 is the first bad commit" my_bisect_log.txt +' + +test_expect_success 'restricting bisection on one dir and a file' ' + git bisect reset && + git bisect start HEAD $HASH1 -- dir1 hello && + para4=$(git rev-parse --verify HEAD) && + test "$para4" = "$PARA_HASH4" && + git bisect bad && + hash3=$(git rev-parse --verify HEAD) && + test "$hash3" = "$HASH3" && + git bisect good && + hash4=$(git rev-parse --verify HEAD) && + test "$hash4" = "$HASH4" && + git bisect good && + para1=$(git rev-parse --verify HEAD) && + test "$para1" = "$PARA_HASH1" && + git bisect good > my_bisect_log.txt && + grep "$PARA_HASH4 is the first bad commit" my_bisect_log.txt +' + +test_expect_success 'skipping away from skipped commit' ' + git bisect start $PARA_HASH7 $HASH1 && + para4=$(git rev-parse --verify HEAD) && + test "$para4" = "$PARA_HASH4" && + git bisect skip && + hash7=$(git rev-parse --verify HEAD) && + test "$hash7" = "$HASH7" && + git bisect skip && + para3=$(git rev-parse --verify HEAD) && + test "$para3" = "$PARA_HASH3" +' + # # test_done |