diff options
Diffstat (limited to 't/t5302-pack-index.sh')
| -rwxr-xr-x | t/t5302-pack-index.sh | 135 |
1 files changed, 90 insertions, 45 deletions
diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index 0639772ac4..4360e77d31 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -10,14 +10,20 @@ test_expect_success \ 'setup' \ 'rm -rf .git git init && + git config pack.threads 1 && i=1 && - while test $i -le 100 + while test $i -le 100 do - i=`printf '%03i' $i` - echo $i >file_$i && - test-genrandom "$i" 8192 >>file_$i && - git update-index --add file_$i && - i=`expr $i + 1` || return 1 + iii=`printf '%03i' $i` + test-genrandom "bar" 200 > wide_delta_$iii && + test-genrandom "baz $iii" 50 >> wide_delta_$iii && + test-genrandom "foo"$i 100 > deep_delta_$iii && + test-genrandom "foo"`expr $i + 1` 100 >> deep_delta_$iii && + test-genrandom "foo"`expr $i + 2` 100 >> deep_delta_$iii && + echo $iii >file_$iii && + test-genrandom "$iii" 8192 >>file_$iii && + git update-index --add file_$iii deep_delta_$iii wide_delta_$iii && + i=`expr $i + 1` || return 1 done && { echo 101 && test-genrandom 100 8192; } >file_101 && git update-index --add file_101 && @@ -48,11 +54,11 @@ test_expect_success \ test_expect_success \ 'index-pack with index version 1' \ - 'git-index-pack --index-version=1 -o 1.idx "test-1-${pack1}.pack"' + 'git index-pack --index-version=1 -o 1.idx "test-1-${pack1}.pack"' test_expect_success \ 'index-pack with index version 2' \ - 'git-index-pack --index-version=2 -o 2.idx "test-1-${pack1}.pack"' + 'git index-pack --index-version=2 -o 2.idx "test-1-${pack1}.pack"' test_expect_success \ 'index-pack results should match pack-objects ones' \ @@ -63,38 +69,58 @@ test_expect_success \ 'index v2: force some 64-bit offsets with pack-objects' \ 'pack3=$(git pack-objects --index-version=2,0x40000 test-3 <obj-list)' -have_64bits= if msg=$(git verify-pack -v "test-3-${pack3}.pack" 2>&1) || ! (echo "$msg" | grep "pack too large .* off_t") then - have_64bits=t + test_set_prereq OFF64_T else say "skipping tests concerning 64-bit offsets" fi -test "$have_64bits" && -test_expect_success \ +test_expect_success OFF64_T \ 'index v2: verify a pack with some 64-bit offsets' \ 'git verify-pack -v "test-3-${pack3}.pack"' -test "$have_64bits" && -test_expect_success \ +test_expect_success OFF64_T \ '64-bit offsets: should be different from previous index v2 results' \ '! cmp "test-2-${pack2}.idx" "test-3-${pack3}.idx"' -test "$have_64bits" && -test_expect_success \ +test_expect_success OFF64_T \ 'index v2: force some 64-bit offsets with index-pack' \ - 'git-index-pack --index-version=2,0x40000 -o 3.idx "test-1-${pack1}.pack"' + 'git index-pack --index-version=2,0x40000 -o 3.idx "test-1-${pack1}.pack"' -test "$have_64bits" && -test_expect_success \ +test_expect_success OFF64_T \ '64-bit offsets: index-pack result should match pack-objects one' \ 'cmp "test-3-${pack3}.idx" "3.idx"' +# returns the object number for given object in given pack index +index_obj_nr() +{ + idx_file=$1 + object_sha1=$2 + nr=0 + git show-index < $idx_file | + while read offs sha1 extra + do + nr=$(($nr + 1)) + test "$sha1" = "$object_sha1" || continue + echo "$(($nr - 1))" + break + done +} + +# returns the pack offset for given object as found in given pack index +index_obj_offset() +{ + idx_file=$1 + object_sha1=$2 + git show-index < $idx_file | grep $object_sha1 | + ( read offs extra && echo "$offs" ) +} + test_expect_success \ '[index v1] 1) stream pack to repository' \ - 'git-index-pack --index-version=1 --stdin < "test-1-${pack1}.pack" && + 'git index-pack --index-version=1 --stdin < "test-1-${pack1}.pack" && git prune-packed && git count-objects | ( read nr rest && test "$nr" -eq 1 ) && cmp "test-1-${pack1}.pack" ".git/objects/pack/pack-${pack1}.pack" && @@ -102,19 +128,22 @@ test_expect_success \ test_expect_success \ '[index v1] 2) create a stealth corruption in a delta base reference' \ - '# this test assumes a delta smaller than 16 bytes at the end of the pack - git show-index <1.idx | sort -n | sed -ne \$p | ( - read delta_offs delta_sha1 && - git cat-file blob "$delta_sha1" > blob_1 && - chmod +w ".git/objects/pack/pack-${pack1}.pack" && - dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($delta_offs + 1)) \ - if=".git/objects/pack/pack-${pack1}.idx" skip=$((256 * 4 + 4)) \ - bs=1 count=20 conv=notrunc && - git cat-file blob "$delta_sha1" > blob_2 )' + '# This test assumes file_101 is a delta smaller than 16 bytes. + # It should be against file_100 but we substitute its base for file_099 + sha1_101=`git hash-object file_101` && + sha1_099=`git hash-object file_099` && + offs_101=`index_obj_offset 1.idx $sha1_101` && + nr_099=`index_obj_nr 1.idx $sha1_099` && + chmod +w ".git/objects/pack/pack-${pack1}.pack" && + dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ + if=".git/objects/pack/pack-${pack1}.idx" \ + skip=$((4 + 256 * 4 + $nr_099 * 24)) \ + bs=1 count=20 conv=notrunc && + git cat-file blob $sha1_101 > file_101_foo1' test_expect_success \ '[index v1] 3) corrupted delta happily returned wrong data' \ - '! cmp blob_1 blob_2' + 'test -f file_101_foo1 && ! cmp file_101 file_101_foo1' test_expect_success \ '[index v1] 4) confirm that the pack is actually corrupted' \ @@ -132,7 +161,7 @@ test_expect_success \ test_expect_success \ '[index v2] 1) stream pack to repository' \ 'rm -f .git/objects/pack/* && - git-index-pack --index-version=2 --stdin < "test-1-${pack1}.pack" && + git index-pack --index-version=2 --stdin < "test-1-${pack1}.pack" && git prune-packed && git count-objects | ( read nr rest && test "$nr" -eq 1 ) && cmp "test-1-${pack1}.pack" ".git/objects/pack/pack-${pack1}.pack" && @@ -140,19 +169,22 @@ test_expect_success \ test_expect_success \ '[index v2] 2) create a stealth corruption in a delta base reference' \ - '# this test assumes a delta smaller than 16 bytes at the end of the pack - git show-index <1.idx | sort -n | sed -ne \$p | ( - read delta_offs delta_sha1 delta_crc && - git cat-file blob "$delta_sha1" > blob_3 && - chmod +w ".git/objects/pack/pack-${pack1}.pack" && - dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($delta_offs + 1)) \ - if=".git/objects/pack/pack-${pack1}.idx" skip=$((8 + 256 * 4)) \ - bs=1 count=20 conv=notrunc && - git cat-file blob "$delta_sha1" > blob_4 )' + '# This test assumes file_101 is a delta smaller than 16 bytes. + # It should be against file_100 but we substitute its base for file_099 + sha1_101=`git hash-object file_101` && + sha1_099=`git hash-object file_099` && + offs_101=`index_obj_offset 1.idx $sha1_101` && + nr_099=`index_obj_nr 1.idx $sha1_099` && + chmod +w ".git/objects/pack/pack-${pack1}.pack" && + dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ + if=".git/objects/pack/pack-${pack1}.idx" \ + skip=$((8 + 256 * 4 + $nr_099 * 20)) \ + bs=1 count=20 conv=notrunc && + git cat-file blob $sha1_101 > file_101_foo2' test_expect_success \ '[index v2] 3) corrupted delta happily returned wrong data' \ - '! cmp blob_3 blob_4' + 'test -f file_101_foo2 && ! cmp file_101 file_101_foo2' test_expect_success \ '[index v2] 4) confirm that the pack is actually corrupted' \ @@ -160,16 +192,19 @@ test_expect_success \ test_expect_success \ '[index v2] 5) pack-objects refuses to reuse corrupted data' \ - 'test_must_fail git pack-objects test-5 <obj-list' + 'test_must_fail git pack-objects test-5 <obj-list && + test_must_fail git pack-objects --no-reuse-object test-6 <obj-list' test_expect_success \ '[index v2] 6) verify-pack detects CRC mismatch' \ 'rm -f .git/objects/pack/* && - git-index-pack --index-version=2 --stdin < "test-1-${pack1}.pack" && + git index-pack --index-version=2 --stdin < "test-1-${pack1}.pack" && git verify-pack ".git/objects/pack/pack-${pack1}.pack" && + obj=`git hash-object file_001` && + nr=`index_obj_nr ".git/objects/pack/pack-${pack1}.idx" $obj` && chmod +w ".git/objects/pack/pack-${pack1}.idx" && - dd if=/dev/zero of=".git/objects/pack/pack-${pack1}.idx" conv=notrunc \ - bs=1 count=4 seek=$((8 + 256 * 4 + `wc -l <obj-list` * 20 + 0)) && + printf xxxx | dd of=".git/objects/pack/pack-${pack1}.idx" conv=notrunc \ + bs=1 count=4 seek=$((8 + 256 * 4 + `wc -l <obj-list` * 20 + $nr * 4)) && ( while read obj do git cat-file -p $obj >/dev/null || exit 1 done <obj-list ) && @@ -177,4 +212,14 @@ test_expect_success \ ".git/objects/pack/pack-${pack1}.pack" 2>&1) && echo "$err" | grep "CRC mismatch"' +test_expect_success 'running index-pack in the object store' ' + rm -f .git/objects/pack/* && + cp test-1-${pack1}.pack .git/objects/pack/pack-${pack1}.pack && + ( + cd .git/objects/pack + git index-pack pack-${pack1}.pack + ) && + test -f .git/objects/pack/pack-${pack1}.idx +' + test_done |