diff options
Diffstat (limited to 't/t3701-add-interactive.sh')
| -rwxr-xr-x | t/t3701-add-interactive.sh | 374 |
1 files changed, 236 insertions, 138 deletions
diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 058698df6a..609fbfdc31 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -10,6 +10,19 @@ then test_done fi +diff_cmp () { + for x + do + sed -e '/^index/s/[0-9a-f]*[1-9a-f][0-9a-f]*\.\./1234567../' \ + -e '/^index/s/\.\.[0-9a-f]*[1-9a-f][0-9a-f]*/..9abcdef/' \ + -e '/^index/s/ 00*\.\./ 0000000../' \ + -e '/^index/s/\.\.00*$/..0000000/' \ + -e '/^index/s/\.\.00* /..0000000 /' \ + "$x" >"$x.filtered" + done + test_cmp "$1.filtered" "$2.filtered" +} + test_expect_success 'setup (initial)' ' echo content >file && git add file && @@ -22,24 +35,24 @@ test_expect_success 'status works (initial)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -new file mode 100644 -index 0000000..d95f3ad ---- /dev/null -+++ b/file -@@ -0,0 +1 @@ -+content -EOF + cat >expected <<-\EOF + new file mode 100644 + index 0000000..d95f3ad + --- /dev/null + +++ b/file + @@ -0,0 +1 @@ + +content + EOF ' test_expect_success 'diff works (initial)' ' - (echo d; echo 1) | git add -i >output && + test_write_lines d 1 | git add -i >output && sed -ne "/new file/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (initial)' ' git add file && - (echo r; echo 1) | git add -i && + test_write_lines r 1 | git add -i && git ls-files >output && ! grep . output ' @@ -59,114 +72,150 @@ test_expect_success 'status works (commit)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1 +1,2 @@ - baseline -+content -EOF + cat >expected <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1 +1,2 @@ + baseline + +content + EOF ' test_expect_success 'diff works (commit)' ' - (echo d; echo 1) | git add -i >output && + test_write_lines d 1 | git add -i >output && sed -ne "/^index/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (commit)' ' git add file && - (echo r; echo 1) | git add -i && + test_write_lines r 1 | git add -i && git add -i </dev/null >output && grep "unchanged *+3/-0 file" output ' test_expect_success 'setup expected' ' -cat >expected <<EOF -EOF -' - -test_expect_success 'setup fake editor' ' - >fake_editor.sh && - chmod a+x fake_editor.sh && - test_set_editor "$(pwd)/fake_editor.sh" + cat >expected <<-\EOF + EOF ' test_expect_success 'dummy edit works' ' - (echo e; echo a) | git add -p && + test_set_editor : && + test_write_lines e a | git add -p && git diff > diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,1 +1,4 @@ - this -+patch --does not - apply -EOF + cat >patch <<-\EOF + @@ -1,1 +1,4 @@ + this + +patch + -does not + apply + EOF ' test_expect_success 'setup fake editor' ' - echo "#!$SHELL_PATH" >fake_editor.sh && - cat >>fake_editor.sh <<\EOF && -mv -f "$1" oldpatch && -mv -f patch "$1" -EOF - chmod a+x fake_editor.sh && + write_script "fake_editor.sh" <<-\EOF && + mv -f "$1" oldpatch && + mv -f patch "$1" + EOF test_set_editor "$(pwd)/fake_editor.sh" ' test_expect_success 'bad edit rejected' ' git reset && - (echo e; echo n; echo d) | git add -p >output && + test_write_lines e n d | git add -p >output && grep "hunk does not apply" output ' test_expect_success 'setup patch' ' -cat >patch <<EOF -this patch -is garbage -EOF + cat >patch <<-\EOF + this patch + is garbage + EOF ' test_expect_success 'garbage edit rejected' ' git reset && - (echo e; echo n; echo d) | git add -p >output && + test_write_lines e n d | git add -p >output && grep "hunk does not apply" output ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,0 +1,0 @@ - baseline -+content -+newcontent -+lines -EOF + cat >patch <<-\EOF + @@ -1,0 +1,0 @@ + baseline + +content + +newcontent + +lines + EOF ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b5dd6c9..f910ae9 100644 ---- a/file -+++ b/file -@@ -1,4 +1,4 @@ - baseline - content --newcontent -+more - lines -EOF + cat >expected <<-\EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,4 +1,4 @@ + baseline + content + -newcontent + +more + lines + EOF ' test_expect_success 'real edit works' ' - (echo e; echo n; echo d) | git add -p && + test_write_lines e n d | git add -p && + git diff >output && + diff_cmp expected output +' + +test_expect_success 'setup file' ' + test_write_lines a "" b "" c >file && + git add file && + test_write_lines a "" d "" c >file +' + +test_expect_success 'setup patch' ' + SP=" " && + NULL="" && + cat >patch <<-EOF + @@ -1,4 +1,4 @@ + a + $NULL + -b + +f + $SP + c + EOF +' + +test_expect_success 'setup expected' ' + cat >expected <<-EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,5 +1,5 @@ + a + $SP + -f + +d + $SP + c + EOF +' + +test_expect_success 'edit can strip spaces from empty context lines' ' + test_write_lines e n q | git add -p 2>error && + test_must_be_empty error && git diff >output && - test_cmp expected output + diff_cmp expected output ' test_expect_success 'skip files similarly as commit -a' ' @@ -178,7 +227,7 @@ test_expect_success 'skip files similarly as commit -a' ' git reset && git commit -am commit && git diff >expected && - test_cmp expected output && + diff_cmp expected output && git reset --hard HEAD^ ' rm -f .gitignore @@ -222,52 +271,67 @@ test_expect_success 'setup again' ' # Write the patch file with a new line at the top and bottom test_expect_success 'setup patch' ' -cat >patch <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF -' - -# Expected output, similar to the patch but w/ diff at the top + cat >patch <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + EOF +' + +# Expected output, diff is similar to the patch but w/ diff at the top test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b6f2c08..61b9053 100755 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF + echo diff --git a/file b/file >expected && + cat patch |sed "/^index/s/ 100644/ 100755/" >>expected && + cat >expected-output <<-\EOF + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + @@ -1,2 +1,3 @@ + +firstline + baseline + content + @@ -1,2 +2,3 @@ + baseline + content + +lastline + \ No newline at end of file + EOF ' # Test splitting the first patch, then adding both -test_expect_success 'add first line works' ' +test_expect_success C_LOCALE_OUTPUT 'add first line works' ' git commit -am "clear local changes" && git apply patch && - (echo s; echo y; echo y) | git add -p file && - git diff --cached > diff && - test_cmp expected diff + printf "%s\n" s y y | git add -p file 2>error | + sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \ + -e "/^[-+@ \\\\]"/p >output && + test_must_be_empty error && + git diff --cached >diff && + diff_cmp expected diff && + test_cmp expected-output output ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/non-empty b/non-empty -deleted file mode 100644 -index d95f3ad..0000000 ---- a/non-empty -+++ /dev/null -@@ -1 +0,0 @@ --content -EOF + cat >expected <<-\EOF + diff --git a/non-empty b/non-empty + deleted file mode 100644 + index d95f3ad..0000000 + --- a/non-empty + +++ /dev/null + @@ -1 +0,0 @@ + -content + EOF ' test_expect_success 'deleting a non-empty file' ' @@ -278,15 +342,15 @@ test_expect_success 'deleting a non-empty file' ' rm non-empty && echo y | git add -p non-empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/empty b/empty -deleted file mode 100644 -index e69de29..0000000 -EOF + cat >expected <<-\EOF + diff --git a/empty b/empty + deleted file mode 100644 + index e69de29..0000000 + EOF ' test_expect_success 'deleting an empty file' ' @@ -297,23 +361,17 @@ test_expect_success 'deleting an empty file' ' rm empty && echo y | git add -p empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'split hunk setup' ' git reset --hard && - for i in 10 20 30 40 50 60 - do - echo $i - done >test && + test_write_lines 10 20 30 40 50 60 >test && git add test && test_tick && git commit -m test && - for i in 10 15 20 21 22 23 24 30 40 50 60 - do - echo $i - done >test + test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test ' test_expect_success 'split hunk "add -p (edit)"' ' @@ -334,17 +392,7 @@ test_expect_success 'split hunk "add -p (edit)"' ' ' test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' - cat >test <<-\EOF && - 5 - 10 - 20 - 21 - 30 - 31 - 40 - 50 - 60 - EOF + test_write_lines 5 10 20 21 30 31 40 50 60 >test && git reset && # test sequence is s(plit), n(o), y(es), e(dit) # q n q q is there to make sure we exit at the end. @@ -378,7 +426,7 @@ test_expect_success 'patch mode ignores unmerged entries' ' +changed EOF git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success TTY 'diffs can be colorized' ' @@ -392,6 +440,26 @@ test_expect_success TTY 'diffs can be colorized' ' grep "$(printf "\\033")" output ' +test_expect_success TTY 'diffFilter filters diff' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "sed s/^/foo:/" && + printf y | test_terminal git add -p >output 2>&1 && + + # avoid depending on the exact coloring or content of the prompts, + # and just make sure we saw our diff prefixed + grep foo:.*content output +' + +test_expect_success TTY 'detect bogus diffFilter output' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "echo too-short" && + printf y | test_must_fail test_terminal git add -p +' + test_expect_success 'patch-mode via -i prompts for files' ' git reset --hard && @@ -407,7 +475,7 @@ test_expect_success 'patch-mode via -i prompts for files' ' echo test >expect && git diff --cached --name-only >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'add -p handles globs' ' @@ -541,4 +609,34 @@ test_expect_success 'status ignores dirty submodules (except HEAD)' ' ! grep dirty-otherwise output ' +test_expect_success 'set up pathological context' ' + git reset --hard && + test_write_lines a a a a a a a a a a a >a && + git add a && + git commit -m a && + test_write_lines c b a a a a a a a b a a a a >a && + test_write_lines a a a a a a a b a a a a >expected-1 && + test_write_lines b a a a a a a a b a a a a >expected-2 && + # check editing can cope with missing header and deleted context lines + # as well as changes to other lines + test_write_lines +b " a" >patch +' + +test_expect_success 'add -p works with pathological context lines' ' + git reset && + printf "%s\n" n y | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-1 actual +' + +test_expect_success 'add -p patch editing works with pathological context lines' ' + git reset && + # n q q below is in case edit fails + printf "%s\n" e y n q q | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-2 actual +' + test_done |