diff options
Diffstat (limited to 't/t3404-rebase-interactive.sh')
| -rwxr-xr-x | t/t3404-rebase-interactive.sh | 214 |
1 files changed, 186 insertions, 28 deletions
diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 467e6c1ed5..3532c482fc 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -60,9 +60,9 @@ test_expect_success 'setup' ' test_commit P fileP ' -# "exec" commands are ran with the user shell by default, but this may +# "exec" commands are run with the user shell by default, but this may # be non-POSIX. For example, if SHELL=zsh then ">file" doesn't work -# to create a file. Unseting SHELL avoids such non-portable behavior +# to create a file. Unsetting SHELL avoids such non-portable behavior # in tests. It must be exported for it to take effect where needed. SHELL= export SHELL @@ -219,9 +219,9 @@ test_expect_success 'abort with error when new base cannot be checked out' ' git commit -m "remove file in base" && set_fake_editor && test_must_fail git rebase -i master > output 2>&1 && - grep "The following untracked working tree files would be overwritten by checkout:" \ + test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" \ output && - grep "file1" output && + test_i18ngrep "file1" output && test_path_is_missing .git/rebase-merge && git reset --hard HEAD^ ' @@ -540,7 +540,7 @@ test_expect_success 'clean error after failed "exec"' ' echo "edited again" > file7 && git add file7 && test_must_fail git rebase --continue 2>error && - grep "You have staged changes in your working tree." error + test_i18ngrep "You have staged changes in your working tree." error ' test_expect_success 'rebase a detached HEAD' ' @@ -555,10 +555,9 @@ test_expect_success 'rebase a detached HEAD' ' test_expect_success 'rebase a commit violating pre-commit' ' mkdir -p .git/hooks && - PRE_COMMIT=.git/hooks/pre-commit && - echo "#!/bin/sh" > $PRE_COMMIT && - echo "test -z \"\$(git diff --cached --check)\"" >> $PRE_COMMIT && - chmod a+x $PRE_COMMIT && + write_script .git/hooks/pre-commit <<-\EOF && + test -z "$(git diff --cached --check)" + EOF echo "monde! " >> file1 && test_tick && test_must_fail git commit -m doesnt-verify file1 && @@ -771,7 +770,6 @@ test_expect_success 'rebase-i history with funny messages' ' test_cmp expect actual ' - test_expect_success 'prepare for rebase -i --exec' ' git checkout master && git checkout -b execute && @@ -780,7 +778,6 @@ test_expect_success 'prepare for rebase -i --exec' ' test_commit three_exec main.txt three_exec ' - test_expect_success 'running "git rebase -i --exec git show HEAD"' ' set_fake_editor && git rebase -i --exec "git show HEAD" HEAD~2 >actual && @@ -793,7 +790,6 @@ test_expect_success 'running "git rebase -i --exec git show HEAD"' ' test_cmp expected actual ' - test_expect_success 'running "git rebase --exec git show HEAD -i"' ' git reset --hard execute && set_fake_editor && @@ -807,7 +803,6 @@ test_expect_success 'running "git rebase --exec git show HEAD -i"' ' test_cmp expected actual ' - test_expect_success 'running "git rebase -ix git show HEAD"' ' git reset --hard execute && set_fake_editor && @@ -835,7 +830,6 @@ test_expect_success 'rebase -ix with several <CMD>' ' test_cmp expected actual ' - test_expect_success 'rebase -ix with several instances of --exec' ' git reset --hard execute && set_fake_editor && @@ -850,7 +844,6 @@ test_expect_success 'rebase -ix with several instances of --exec' ' test_cmp expected actual ' - test_expect_success 'rebase -ix with --autosquash' ' git reset --hard execute && git checkout -b autosquash && @@ -876,16 +869,15 @@ test_expect_success 'rebase -ix with --autosquash' ' test_cmp expected actual ' - -test_expect_success 'rebase --exec without -i shows error message' ' +test_expect_success 'rebase --exec works without -i ' ' git reset --hard execute && - set_fake_editor && - test_must_fail git rebase --exec "git show HEAD" HEAD~2 2>actual && - echo "The --exec option must be used with the --interactive option" >expected && - test_i18ncmp expected actual + rm -rf exec_output && + EDITOR="echo >invoked_editor" git rebase --exec "echo a line >>exec_output" HEAD~2 2>actual && + test_i18ngrep "Successfully rebased and updated" actual && + test_line_count = 2 exec_output && + test_path_is_missing invoked_editor ' - test_expect_success 'rebase -i --exec without <CMD>' ' git reset --hard execute && set_fake_editor && @@ -961,13 +953,13 @@ test_expect_success 'rebase -i produces readable reflog' ' set_fake_editor && git rebase -i --onto I F branch-reflog-test && cat >expect <<-\EOF && - rebase -i (start): checkout I - rebase -i (pick): G - rebase -i (pick): H rebase -i (finish): returning to refs/heads/branch-reflog-test + rebase -i (pick): H + rebase -i (pick): G + rebase -i (start): checkout I EOF - tail -n 4 .git/logs/HEAD | - sed -e "s/.* //" >actual && + git reflog -n4 HEAD | + sed "s/[^:]*: //" >actual && test_cmp expect actual ' @@ -1006,6 +998,22 @@ test_expect_success 'rebase -i with --strategy and -X' ' test $(cat file1) = Z ' +test_expect_success 'interrupted rebase -i with --strategy and -X' ' + git checkout -b conflict-merge-use-theirs-interrupted conflict-branch && + git reset --hard HEAD^ && + >breakpoint && + git add breakpoint && + git commit -m "breakpoint for interactive mode" && + echo five >conflict && + echo Z >file1 && + git commit -a -m "one file conflict" && + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive -Xours conflict-branch && + git rebase --continue && + test $(git show conflict-branch:conflict) = $(cat conflict) && + test $(cat file1) = Z +' + test_expect_success 'rebase -i error on commits with \ in message' ' current_head=$(git rev-parse HEAD) && test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" && @@ -1052,7 +1060,7 @@ test_expect_success 'todo count' ' EOF test_set_editor "$(pwd)/dump-raw.sh" && git rebase -i HEAD~4 >actual && - grep "^# Rebase ..* onto ..* ([0-9]" actual + test_i18ngrep "^# Rebase ..* onto ..* ([0-9]" actual ' test_expect_success 'rebase -i commits that overwrite untracked files (pick)' ' @@ -1123,4 +1131,154 @@ test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' ' test ! -f .git/CHERRY_PICK_HEAD ' +rebase_setup_and_clean () { + test_when_finished " + git checkout master && + test_might_fail git branch -D $1 && + test_might_fail git rebase --abort + " && + git checkout -b $1 master +} + +test_expect_success 'drop' ' + rebase_setup_and_clean drop-test && + set_fake_editor && + FAKE_LINES="1 drop 2 3 drop 4 5" git rebase -i --root && + test E = $(git cat-file commit HEAD | sed -ne \$p) && + test C = $(git cat-file commit HEAD^ | sed -ne \$p) && + test A = $(git cat-file commit HEAD^^ | sed -ne \$p) +' + +cat >expect <<EOF +Successfully rebased and updated refs/heads/missing-commit. +EOF + +test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' + test_config rebase.missingCommitsCheck ignore && + rebase_setup_and_clean missing-commit && + set_fake_editor && + FAKE_LINES="1 2 3 4" \ + git rebase -i --root 2>actual && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ncmp expect actual +' + +cat >expect <<EOF +Warning: some commits may have been dropped accidentally. +Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) +To avoid this message, use "drop" to explicitly remove a commit. + +Use 'git config rebase.missingCommitsCheck' to change the level of warnings. +The possible behaviours are: ignore, warn, error. + +Successfully rebased and updated refs/heads/missing-commit. +EOF + +test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' + test_config rebase.missingCommitsCheck warn && + rebase_setup_and_clean missing-commit && + set_fake_editor && + FAKE_LINES="1 2 3 4" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + test D = $(git cat-file commit HEAD | sed -ne \$p) +' + +cat >expect <<EOF +Warning: some commits may have been dropped accidentally. +Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) +To avoid this message, use "drop" to explicitly remove a commit. + +Use 'git config rebase.missingCommitsCheck' to change the level of warnings. +The possible behaviours are: ignore, warn, error. + +You can fix this with 'git rebase --edit-todo'. +Or you can abort the rebase with 'git rebase --abort'. +EOF + +test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' + test_config rebase.missingCommitsCheck error && + rebase_setup_and_clean missing-commit && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 4" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + cp .git/rebase-merge/git-rebase-todo.backup \ + .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 drop 3 4 drop 5" \ + git rebase --edit-todo && + git rebase --continue && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test B = $(git cat-file commit HEAD^ | sed -ne \$p) +' + +cat >expect <<EOF +Warning: the command isn't recognized in the following line: + - badcmd $(git rev-list --oneline -1 master~1) + +You can fix this with 'git rebase --edit-todo'. +Or you can abort the rebase with 'git rebase --abort'. +EOF + +test_expect_success 'static check of bad command' ' + rebase_setup_and_clean bad-cmd && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo && + git rebase --continue && + test E = $(git cat-file commit HEAD | sed -ne \$p) && + test C = $(git cat-file commit HEAD^ | sed -ne \$p) +' + +test_expect_success 'tabs and spaces are accepted in the todolist' ' + rebase_setup_and_clean indented-comment && + write_script add-indent.sh <<-\EOF && + ( + # Turn single spaces into space/tab mix + sed "1s/ / /g; 2s/ / /g; 3s/ / /g" "$1" + printf "\n\t# comment\n #more\n\t # comment\n" + ) >"$1.new" + mv "$1.new" "$1" + EOF + test_set_editor "$(pwd)/add-indent.sh" && + git rebase -i HEAD^^^ && + test E = $(git cat-file commit HEAD | sed -ne \$p) +' + +cat >expect <<EOF +Warning: the SHA-1 is missing or isn't a commit in the following line: + - edit XXXXXXX False commit + +You can fix this with 'git rebase --edit-todo'. +Or you can abort the rebase with 'git rebase --abort'. +EOF + +test_expect_success 'static check of bad SHA-1' ' + rebase_setup_and_clean bad-sha && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + FAKE_LINES="1 2 4 5 6" git rebase --edit-todo && + git rebase --continue && + test E = $(git cat-file commit HEAD | sed -ne \$p) +' + +test_expect_success 'editor saves as CR/LF' ' + git checkout -b with-crlf && + write_script add-crs.sh <<-\EOF && + sed -e "s/\$/Q/" <"$1" | tr Q "\\015" >"$1".new && + mv -f "$1".new "$1" + EOF + ( + test_set_editor "$(pwd)/add-crs.sh" && + git rebase -i HEAD^ + ) +' + test_done |