diff options
Diffstat (limited to 't/t1092-sparse-checkout-compatibility.sh')
| -rwxr-xr-x | t/t1092-sparse-checkout-compatibility.sh | 206 |
1 files changed, 186 insertions, 20 deletions
diff --git a/t/t1092-sparse-checkout-compatibility.sh b/t/t1092-sparse-checkout-compatibility.sh index 91e30d6ec2..ca91c6a67f 100755 --- a/t/t1092-sparse-checkout-compatibility.sh +++ b/t/t1092-sparse-checkout-compatibility.sh @@ -47,7 +47,7 @@ test_expect_success 'setup' ' git checkout -b base && for dir in folder1 folder2 deep do - git checkout -b update-$dir && + git checkout -b update-$dir base && echo "updated $dir" >$dir/a && git commit -a -m "update $dir" || return 1 done && @@ -114,6 +114,16 @@ test_expect_success 'setup' ' git add . && git commit -m "file to dir" && + for side in left right + do + git checkout -b merge-$side base && + echo $side >>deep/deeper2/a && + echo $side >>folder1/a && + echo $side >>folder2/a && + git add . && + git commit -m "$side" || return 1 + done && + git checkout -b deepest base && echo "updated deepest" >deep/deeper1/deepest/a && git commit -a -m "update deepest" && @@ -177,6 +187,16 @@ test_sparse_match () { test_cmp sparse-checkout-err sparse-index-err } +test_sparse_unstaged () { + file=$1 && + for repo in sparse-checkout sparse-index + do + # Skip "unmerged" paths + git -C $repo diff --staged --diff-filter=u -- "$file" >diff && + test_must_be_empty diff || return 1 + done +} + test_expect_success 'sparse-index contents' ' init_repos && @@ -281,6 +301,20 @@ test_expect_success 'add, commit, checkout' ' test_all_match git checkout - ' +test_expect_success 'add outside sparse cone' ' + init_repos && + + run_on_sparse mkdir folder1 && + run_on_sparse ../edit-contents folder1/a && + run_on_sparse ../edit-contents folder1/newfile && + test_sparse_match test_must_fail git add folder1/a && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/a && + test_sparse_match test_must_fail git add folder1/newfile && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/newfile +' + test_expect_success 'commit including unstaged changes' ' init_repos && @@ -312,9 +346,6 @@ test_expect_success 'commit including unstaged changes' ' test_expect_success 'status/add: outside sparse cone' ' init_repos && - # adding a "missing" file outside the cone should fail - test_sparse_match test_must_fail git add folder1/a && - # folder1 is at HEAD, but outside the sparse cone run_on_sparse mkdir folder1 && cp initial-repo/folder1/a sparse-checkout/folder1/a && @@ -330,21 +361,29 @@ test_expect_success 'status/add: outside sparse cone' ' test_sparse_match git status --porcelain=v2 && - # This "git add folder1/a" fails with a warning - # in the sparse repos, differing from the full - # repo. This is intentional. + # Adding the path outside of the sparse-checkout cone should fail. test_sparse_match test_must_fail git add folder1/a && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/a && test_sparse_match test_must_fail git add --refresh folder1/a && - test_all_match git status --porcelain=v2 && - - test_all_match git add . && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/a && + test_sparse_match test_must_fail git add folder1/new && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/new && + test_sparse_match git add --sparse folder1/a && + test_sparse_match git add --sparse folder1/new && + + test_all_match git add --sparse . && test_all_match git status --porcelain=v2 && test_all_match git commit -m folder1/new && + test_all_match git rev-parse HEAD^{tree} && run_on_all ../edit-contents folder1/newer && - test_all_match git add folder1/ && + test_all_match git add --sparse folder1/ && test_all_match git status --porcelain=v2 && - test_all_match git commit -m folder1/newer + test_all_match git commit -m folder1/newer && + test_all_match git rev-parse HEAD^{tree} ' test_expect_success 'checkout and reset --hard' ' @@ -472,16 +511,97 @@ test_expect_success 'checkout and reset (mixed) [sparse]' ' test_sparse_match git reset update-folder2 ' -test_expect_success 'merge' ' +test_expect_success 'merge, cherry-pick, and rebase' ' init_repos && - test_all_match git checkout -b merge update-deep && - test_all_match git merge -m "folder1" update-folder1 && - test_all_match git rev-parse HEAD^{tree} && - test_all_match git merge -m "folder2" update-folder2 && + for OPERATION in "merge -m merge" cherry-pick rebase + do + test_all_match git checkout -B temp update-deep && + test_all_match git $OPERATION update-folder1 && + test_all_match git rev-parse HEAD^{tree} && + test_all_match git $OPERATION update-folder2 && + test_all_match git rev-parse HEAD^{tree} || return 1 + done +' + +test_expect_success 'merge with conflict outside cone' ' + init_repos && + + test_all_match git checkout -b merge-tip merge-left && + test_all_match git status --porcelain=v2 && + test_all_match test_must_fail git merge -m merge merge-right && + test_all_match git status --porcelain=v2 && + + # Resolve the conflict in different ways: + # 1. Revert to the base + test_all_match git checkout base -- deep/deeper2/a && + test_all_match git status --porcelain=v2 && + + # 2. Add the file with conflict markers + test_sparse_match test_must_fail git add folder1/a && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/a && + test_all_match git add --sparse folder1/a && + test_all_match git status --porcelain=v2 && + + # 3. Rename the file to another sparse filename and + # accept conflict markers as resolved content. + run_on_all mv folder2/a folder2/z && + test_sparse_match test_must_fail git add folder2 && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder2/z && + test_all_match git add --sparse folder2 && + test_all_match git status --porcelain=v2 && + + test_all_match git merge --continue && + test_all_match git status --porcelain=v2 && test_all_match git rev-parse HEAD^{tree} ' +test_expect_success 'cherry-pick/rebase with conflict outside cone' ' + init_repos && + + for OPERATION in cherry-pick rebase + do + test_all_match git checkout -B tip && + test_all_match git reset --hard merge-left && + test_all_match git status --porcelain=v2 && + test_all_match test_must_fail git $OPERATION merge-right && + test_all_match git status --porcelain=v2 && + + # Resolve the conflict in different ways: + # 1. Revert to the base + test_all_match git checkout base -- deep/deeper2/a && + test_all_match git status --porcelain=v2 && + + # 2. Add the file with conflict markers + # NEEDSWORK: Even though the merge conflict removed the + # SKIP_WORKTREE bit from the index entry for folder1/a, we should + # warn that this is a problematic add. + test_sparse_match test_must_fail git add folder1/a && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder1/a && + test_all_match git add --sparse folder1/a && + test_all_match git status --porcelain=v2 && + + # 3. Rename the file to another sparse filename and + # accept conflict markers as resolved content. + # NEEDSWORK: This mode now fails, because folder2/z is + # outside of the sparse-checkout cone and does not match an + # existing index entry with the SKIP_WORKTREE bit cleared. + run_on_all mv folder2/a folder2/z && + test_sparse_match test_must_fail git add folder2 && + grep "Disable or modify the sparsity rules" sparse-checkout-err && + test_sparse_unstaged folder2/z && + test_all_match git add --sparse folder2 && + test_all_match git status --porcelain=v2 && + + test_all_match git $OPERATION --continue && + test_all_match git status --porcelain=v2 && + test_all_match git rev-parse HEAD^{tree} || return 1 + done +' + test_expect_success 'merge with outside renames' ' init_repos && @@ -549,6 +669,7 @@ test_expect_success 'clean' ' test_expect_success 'submodule handling' ' init_repos && + test_sparse_match git sparse-checkout add modules && test_all_match mkdir modules && test_all_match touch modules/a && test_all_match git add modules && @@ -558,6 +679,7 @@ test_expect_success 'submodule handling' ' test_all_match git commit -m "add submodule" && # having a submodule prevents "modules" from collapse + test_sparse_match git sparse-checkout set deep/deeper1 && test-tool -C sparse-index read-cache --table >cache && grep "100644 blob .* modules/a" cache && grep "160000 commit $(git -C initial-repo rev-parse HEAD) modules/sub" cache @@ -575,8 +697,17 @@ test_expect_success 'sparse-index is expanded and converted back' ' ensure_not_expanded () { rm -f trace2.txt && echo >>sparse-index/untracked.txt && - GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \ - git -C sparse-index "$@" && + + if test "$1" = "!" + then + shift && + test_must_fail env \ + GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \ + git -C sparse-index "$@" || return 1 + else + GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \ + git -C sparse-index "$@" || return 1 + fi && test_region ! index ensure_full_index trace2.txt } @@ -598,7 +729,42 @@ test_expect_success 'sparse-index is not expanded' ' git -C sparse-index reset --hard && ensure_not_expanded checkout rename-out-to-out -- deep/deeper1 && git -C sparse-index reset --hard && - ensure_not_expanded restore -s rename-out-to-out -- deep/deeper1 + ensure_not_expanded restore -s rename-out-to-out -- deep/deeper1 && + + echo >>sparse-index/README.md && + ensure_not_expanded add -A && + echo >>sparse-index/extra.txt && + ensure_not_expanded add extra.txt && + echo >>sparse-index/untracked.txt && + ensure_not_expanded add . && + + ensure_not_expanded checkout -f update-deep && + test_config -C sparse-index pull.twohead ort && + ( + sane_unset GIT_TEST_MERGE_ALGORITHM && + for OPERATION in "merge -m merge" cherry-pick rebase + do + ensure_not_expanded merge -m merge update-folder1 && + ensure_not_expanded merge -m merge update-folder2 || return 1 + done + ) +' + +test_expect_success 'sparse-index is not expanded: merge conflict in cone' ' + init_repos && + + for side in right left + do + git -C sparse-index checkout -b expand-$side base && + echo $side >sparse-index/deep/a && + git -C sparse-index commit -a -m "$side" || return 1 + done && + + ( + sane_unset GIT_TEST_MERGE_ALGORITHM && + git -C sparse-index config pull.twohead ort && + ensure_not_expanded ! merge -m merged expand-right + ) ' # NEEDSWORK: a sparse-checkout behaves differently from a full checkout |