diff options
Diffstat (limited to 't/README')
| -rw-r--r-- | t/README | 247 |
1 files changed, 223 insertions, 24 deletions
@@ -18,25 +18,48 @@ The easiest way to run tests is to say "make". This runs all the tests. *** t0000-basic.sh *** - * ok 1: .git/objects should be empty after git-init in an empty repo. - * ok 2: .git/objects should have 256 subdirectories. - * ok 3: git-update-index without --add should fail adding. + ok 1 - .git/objects should be empty after git init in an empty repo. + ok 2 - .git/objects should have 3 subdirectories. + ok 3 - success is reported like this ... - * ok 23: no diff after checkout and git-update-index --refresh. - * passed all 23 test(s) - *** t0100-environment-names.sh *** - * ok 1: using old names should issue warnings. - * ok 2: using old names but having new names should not issue warnings. - ... - -Or you can run each test individually from command line, like -this: - - $ sh ./t3001-ls-files-killed.sh - * ok 1: git-update-index --add to add various paths. - * ok 2: git-ls-files -k to show killed files. - * ok 3: validate git-ls-files -k output. - * passed all 3 test(s) + ok 43 - very long name in the index handled sanely + # fixed 1 known breakage(s) + # still have 1 known breakage(s) + # passed all remaining 42 test(s) + 1..43 + *** t0001-init.sh *** + ok 1 - plain + ok 2 - plain with GIT_WORK_TREE + ok 3 - plain bare + +Since the tests all output TAP (see http://testanything.org) they can +be run with any TAP harness. Here's an example of parallel testing +powered by a recent version of prove(1): + + $ prove --timer --jobs 15 ./t[0-9]*.sh + [19:17:33] ./t0005-signals.sh ................................... ok 36 ms + [19:17:33] ./t0022-crlf-rename.sh ............................... ok 69 ms + [19:17:33] ./t0024-crlf-archive.sh .............................. ok 154 ms + [19:17:33] ./t0004-unwritable.sh ................................ ok 289 ms + [19:17:33] ./t0002-gitfile.sh ................................... ok 480 ms + ===( 102;0 25/? 6/? 5/? 16/? 1/? 4/? 2/? 1/? 3/? 1... )=== + +prove and other harnesses come with a lot of useful options. The +--state option in particular is very useful: + + # Repeat until no more failures + $ prove -j 15 --state=failed,save ./t[0-9]*.sh + +You can also run each test individually from command line, like this: + + $ sh ./t3010-ls-files-killed-modified.sh + ok 1 - git update-index --add to add various paths. + ok 2 - git ls-files -k to show killed files. + ok 3 - validate git ls-files -k output. + ok 4 - git ls-files -m to show modified files. + ok 5 - validate git ls-files -m output. + # passed all 5 test(s) + 1..5 You can pass --verbose (or -v), --debug (or -d), and --immediate (or -i) command line argument to the test, or by setting GIT_TEST_OPTS @@ -198,15 +221,101 @@ This test harness library does the following things: - If the script is invoked with command line argument --help (or -h), it shows the test_description and exits. - - Creates an empty test directory with an empty .git/objects - database and chdir(2) into it. This directory is 't/trash directory' - if you must know, but I do not think you care. + - Creates an empty test directory with an empty .git/objects database + and chdir(2) into it. This directory is 't/trash + directory.$test_name_without_dotsh', with t/ subject to change by + the --root option documented above. - Defines standard test helper functions for your scripts to use. These functions are designed to make all scripts behave consistently when command line arguments --verbose (or -v), --debug (or -d), and --immediate (or -i) is given. +Do's, don'ts & things to keep in mind +------------------------------------- + +Here are a few examples of things you probably should and shouldn't do +when writing tests. + +Do: + + - Put all code inside test_expect_success and other assertions. + + Even code that isn't a test per se, but merely some setup code + should be inside a test assertion. + + - Chain your test assertions + + Write test code like this: + + git merge foo && + git push bar && + test ... + + Instead of: + + git merge hla + git push gh + test ... + + That way all of the commands in your tests will succeed or fail. If + you must ignore the return value of something (e.g., the return + after unsetting a variable that was already unset is unportable) it's + best to indicate so explicitly with a semicolon: + + unset HLAGH; + git merge hla && + git push gh && + test ... + +Don't: + + - exit() within a <script> part. + + The harness will catch this as a programming error of the test. + Use test_done instead if you need to stop the tests early (see + "Skipping tests" below). + + - Break the TAP output + + The raw output from your test may be interpreted by a TAP harness. TAP + harnesses will ignore everything they don't know about, but don't step + on their toes in these areas: + + - Don't print lines like "$x..$y" where $x and $y are integers. + + - Don't print lines that begin with "ok" or "not ok". + + TAP harnesses expect a line that begins with either "ok" and "not + ok" to signal a test passed or failed (and our harness already + produces such lines), so your script shouldn't emit such lines to + their output. + + You can glean some further possible issues from the TAP grammar + (see http://search.cpan.org/perldoc?TAP::Parser::Grammar#TAP_Grammar) + but the best indication is to just run the tests with prove(1), + it'll complain if anything is amiss. + +Keep in mind: + + - Inside <script> part, the standard output and standard error + streams are discarded, and the test harness only reports "ok" or + "not ok" to the end user running the tests. Under --verbose, they + are shown to help debugging the tests. + + +Skipping tests +-------------- + +If you need to skip all the remaining tests you should set skip_all +and immediately call test_done. The string you give to skip_all will +be used as an explanation for why the test was skipped. for instance: + + if ! test_have_prereq PERL + then + skip_all='skipping perl interface tests, perl not available' + test_done + fi End with test_done ------------------ @@ -222,9 +331,9 @@ Test harness library There are a handful helper functions defined in the test harness library for your script to use. - - test_expect_success <message> <script> + - test_expect_success [<prereq>] <message> <script> - This takes two strings as parameter, and evaluates the + Usually takes two strings as parameter, and evaluates the <script>. If it yields success, test is considered successful. <message> should state what it is testing. @@ -234,7 +343,14 @@ library for your script to use. 'git-write-tree should be able to write an empty tree.' \ 'tree=$(git-write-tree)' - - test_expect_failure <message> <script> + If you supply three parameters the first will be taken to be a + prerequisite, see the test_set_prereq and test_have_prereq + documentation below: + + test_expect_success TTY 'git --paginate rev-list uses a pager' \ + ' ... ' + + - test_expect_failure [<prereq>] <message> <script> This is NOT the opposite of test_expect_success, but is used to mark a test that demonstrates a known breakage. Unlike @@ -243,6 +359,16 @@ library for your script to use. success and "still broken" on failure. Failures from these tests won't cause -i (immediate) to stop. + Like test_expect_success this function can optionally use a three + argument invocation with a prerequisite as the first argument. + + - test_expect_code [<prereq>] <code> <message> <script> + + Analogous to test_expect_success, but pass the test if it exits + with a given exit <code> + + test_expect_code 1 'Merge with d/f conflicts' 'git merge "merge msg" B master' + - test_debug <script> This takes a single argument, <script>, and evaluates it only @@ -275,6 +401,53 @@ library for your script to use. Merges the given rev using the given message. Like test_commit, creates a tag and calls test_tick before committing. + - test_set_prereq SOME_PREREQ + + Set a test prerequisite to be used later with test_have_prereq. The + test-lib will set some prerequisites for you, e.g. PERL and PYTHON + which are derived from ./GIT-BUILD-OPTIONS (grep test_set_prereq + test-lib.sh for more). Others you can set yourself and use later + with either test_have_prereq directly, or the three argument + invocation of test_expect_success and test_expect_failure. + + - test_have_prereq SOME PREREQ + + Check if we have a prerequisite previously set with + test_set_prereq. The most common use of this directly is to skip + all the tests if we don't have some essential prerequisite: + + if ! test_have_prereq PERL + then + skip_all='skipping perl interface tests, perl not available' + test_done + fi + + - test_external [<prereq>] <message> <external> <script> + + Execute a <script> with an <external> interpreter (like perl). This + was added for tests like t9700-perl-git.sh which do most of their + work in an external test script. + + test_external \ + 'GitwebCache::*FileCache*' \ + "$PERL_PATH" "$TEST_DIRECTORY"/t9503/test_cache_interface.pl + + If the test is outputting its own TAP you should set the + test_external_has_tap variable somewhere before calling the first + test_external* function. See t9700-perl-git.sh for an example. + + # The external test will outputs its own plan + test_external_has_tap=1 + + - test_external_without_stderr [<prereq>] <message> <external> <script> + + Like test_external but fail if there's any output on stderr, + instead of checking the exit code. + + test_external_without_stderr \ + 'Perl API' \ + "$PERL_PATH" "$TEST_DIRECTORY"/t9700/test.pl + - test_must_fail <git-command> Run a git command and ensure it fails in a controlled way. Use @@ -283,6 +456,32 @@ library for your script to use. treats it as just another expected failure, which would let such a bug go unnoticed. + - test_might_fail <git-command> + + Similar to test_must_fail, but tolerate success, too. Use this + instead of "<git-command> || :" to catch failures due to segv. + + - test_cmp <expected> <actual> + + Check whether the content of the <actual> file matches the + <expected> file. This behaves like "cmp" but produces more + helpful output when the test is run with "-v" option. + + - test_when_finished <script> + + Prepend <script> to a list of commands to run to clean up + at the end of the current test. If some clean-up command + fails, the test will not pass. + + Example: + + test_expect_success 'branch pointing to non-commit' ' + git rev-parse HEAD^{tree} >.git/refs/heads/invalid && + test_when_finished "git update-ref -d refs/heads/invalid" && + ... + ' + + Tips for Writing Tests ---------------------- |