diff options
Diffstat (limited to 'gitweb')
| -rw-r--r-- | gitweb/INSTALL | 111 | ||||
| -rw-r--r-- | gitweb/Makefile | 8 | ||||
| -rw-r--r-- | gitweb/README | 434 | ||||
| -rwxr-xr-x | gitweb/gitweb.perl | 665 | ||||
| -rw-r--r-- | gitweb/static/js/blame_incremental.js | 79 | ||||
| -rw-r--r-- | gitweb/static/js/javascript-detection.js | 8 |
6 files changed, 499 insertions, 806 deletions
diff --git a/gitweb/INSTALL b/gitweb/INSTALL index c5236fee9d..6d45406797 100644 --- a/gitweb/INSTALL +++ b/gitweb/INSTALL @@ -130,6 +130,8 @@ You can specify the following configuration variables when building GIT: Points to an .html file which is included on the gitweb project overview page ('projects_list' view), if it exists. Relative to gitweb.cgi script. [Default: indextext.html] + * GITWEB_SITE_HTML_HEAD_STRING + html snippet to include in the <head> section of each page. [No default] * GITWEB_SITE_HEADER Filename of html text to include at top of each page. Relative to gitweb.cgi script. [No default] @@ -229,9 +231,9 @@ Gitweb config file ------------------ See also "Runtime gitweb configuration" section in README file -for gitweb (in gitweb/README). +for gitweb (in gitweb/README), and gitweb.conf(5) manpage. -- You can configure gitweb further using the gitweb configuration file; +- You can configure gitweb further using the per-instance gitweb configuration file; by default this is a file named gitweb_config.perl in the same place as gitweb.cgi script. You can control the default place for the config file using the GITWEB_CONFIG build configuration variable, and you can set it @@ -241,6 +243,17 @@ for gitweb (in gitweb/README). GITWEB_CONFIG_SYSTEM build configuration variable, and override it through the GITWEB_CONFIG_SYSTEM environment variable. + Note that if per-instance configuration file exists, then system-wide + configuration is _not used at all_. This is quite untypical and suprising + behavior. On the other hand changing current behavior would break backwards + compatibility and can lead to unexpected changes in gitweb behavior. + Therefore gitweb also looks for common system-wide configuration file, + normally /etc/gitweb-common.conf (set during build time using build time + configuration variable GITWEB_CONFIG_COMMON, set it at runtime using + environment variable with the same name). Settings from per-instance or + system-wide configuration file override those from common system-wide + configuration file. + - The gitweb config file is a fragment of perl code. You can set variables using "our $variable = value"; text from "#" character until the end of a line is ignored. See perlsyn(1) for details. @@ -276,97 +289,19 @@ adding the following lines to your $GITWEB_CONFIG: Gitweb repositories ------------------- -- By default all git repositories under projectroot are visible and - available to gitweb. The list of projects is generated by default by - scanning the projectroot directory for git repositories (for object - databases to be more exact). - - You can provide a pre-generated list of [visible] repositories, - together with information about their owners (the project ownership - defaults to the owner of the repository directory otherwise), by setting - the GITWEB_LIST build configuration variable (or the $projects_list - variable in the gitweb config file) to point to a plain file. - - Each line of the projects list file should consist of the url-encoded path - to the project repository database (relative to projectroot), followed - by the url-encoded project owner on the same line (separated by a space). - Spaces in both project path and project owner have to be encoded as either - '%20' or '+'. - - Other characters that have to be url-encoded, i.e. replaced by '%' - followed by two-digit character number in octal, are: other whitespace - characters (because they are field separator in a record), plus sign '+' - (because it can be used as replacement for spaces), and percent sign '%' - (which is used for encoding / escaping). - - You can generate the projects list index file using the project_index - action (the 'TXT' link on projects list page) directly from gitweb. - -- By default, even if a project is not visible on projects list page, you - can view it nevertheless by hand-crafting a gitweb URL. You can set the - GITWEB_STRICT_EXPORT build configuration variable (or the $strict_export - variable in the gitweb config file) to only allow viewing of - repositories also shown on the overview page. - -- Alternatively, you can configure gitweb to only list and allow - viewing of the explicitly exported repositories, via the - GITWEB_EXPORT_OK build configuration variable (or the $export_ok - variable in gitweb config file). If it evaluates to true, gitweb - shows repositories only if this file exists in its object database - (if directory has the magic file named $export_ok). - -- Finally, it is possible to specify an arbitrary perl subroutine that - will be called for each project to determine if it can be exported. - The subroutine receives an absolute path to the project as its only - parameter. - - For example, if you use mod_perl to run the script, and have dumb - http protocol authentication configured for your repositories, you - can use the following hook to allow access only if the user is - authorized to read the files: - - $export_auth_hook = sub { - use Apache2::SubRequest (); - use Apache2::Const -compile => qw(HTTP_OK); - my $path = "$_[0]/HEAD"; - my $r = Apache2::RequestUtil->request; - my $sub = $r->lookup_file($path); - return $sub->filename eq $path - && $sub->status == Apache2::Const::HTTP_OK; - }; - - -Generating projects list using gitweb -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -We assume that GITWEB_CONFIG has its default Makefile value, namely -gitweb_config.perl. Put the following in gitweb_make_index.perl file: - - $GITWEB_CONFIG = "gitweb_config.perl"; - do $GITWEB_CONFIG if -e $GITWEB_CONFIG; - - $projects_list = $projectroot; - -Then create the following script to get list of project in the format -suitable for GITWEB_LIST build configuration variable (or -$projects_list variable in gitweb config): - - #!/bin/sh - - export GITWEB_CONFIG="gitweb_make_index.perl" - export GATEWAY_INTERFACE="CGI/1.1" - export HTTP_ACCEPT="*/*" - export REQUEST_METHOD="GET" - export QUERY_STRING="a=project_index" - - perl -- /var/www/cgi-bin/gitweb.cgi +By default gitweb shows all git repositories under single common repository +root on a local filesystem; see description of GITWEB_PROJECTROOT build-time +configuration variable above (and also of GITWEB_LIST). + +More advanced usage, like limiting access or visibility of repositories and +managing multiple roots are described on gitweb manpage. Example web server configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -See also "Webserver configuration" section in README file for gitweb -(in gitweb/README). +See also "Webserver configuration" and "Advanced web server setup" sections +in gitweb(1) manpage. - Apache2, gitweb installed as CGI script, diff --git a/gitweb/Makefile b/gitweb/Makefile index 5d20515fba..cd194d057f 100644 --- a/gitweb/Makefile +++ b/gitweb/Makefile @@ -20,6 +20,7 @@ INSTALL ?= install # default configuration for gitweb GITWEB_CONFIG = gitweb_config.perl GITWEB_CONFIG_SYSTEM = /etc/gitweb.conf +GITWEB_CONFIG_COMMON = /etc/gitweb-common.conf GITWEB_HOME_LINK_STR = projects GITWEB_SITENAME = GITWEB_PROJECTROOT = /pub/git @@ -33,6 +34,7 @@ GITWEB_CSS = static/gitweb.css GITWEB_LOGO = static/git-logo.png GITWEB_FAVICON = static/git-favicon.png GITWEB_JS = static/gitweb.js +GITWEB_SITE_HTML_HEAD_STRING = GITWEB_SITE_HEADER = GITWEB_SITE_FOOTER = HIGHLIGHT_BIN = highlight @@ -129,6 +131,7 @@ GITWEB_REPLACE = \ -e 's|++GIT_BINDIR++|$(bindir)|g' \ -e 's|++GITWEB_CONFIG++|$(GITWEB_CONFIG)|g' \ -e 's|++GITWEB_CONFIG_SYSTEM++|$(GITWEB_CONFIG_SYSTEM)|g' \ + -e 's|++GITWEB_CONFIG_COMMON++|$(GITWEB_CONFIG_COMMON)|g' \ -e 's|++GITWEB_HOME_LINK_STR++|$(GITWEB_HOME_LINK_STR)|g' \ -e 's|++GITWEB_SITENAME++|$(GITWEB_SITENAME)|g' \ -e 's|++GITWEB_PROJECTROOT++|$(GITWEB_PROJECTROOT)|g' \ @@ -142,6 +145,7 @@ GITWEB_REPLACE = \ -e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \ -e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \ -e 's|++GITWEB_JS++|$(GITWEB_JS)|g' \ + -e 's|++GITWEB_SITE_HTML_HEAD_STRING++|$(GITWEB_SITE_HTML_HEAD_STRING)|g' \ -e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \ -e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g' \ -e 's|++HIGHLIGHT_BIN++|$(HIGHLIGHT_BIN)|g' @@ -183,7 +187,9 @@ install: all ### Cleaning rules clean: - $(RM) gitweb.cgi static/gitweb.min.js static/gitweb.min.css GITWEB-BUILD-OPTIONS + $(RM) gitweb.cgi static/gitweb.js \ + static/gitweb.min.js static/gitweb.min.css \ + GITWEB-BUILD-OPTIONS .PHONY: all clean install test test-installed .FORCE-GIT-VERSION-FILE FORCE diff --git a/gitweb/README b/gitweb/README index a4cfcb42cd..6da4778b73 100644 --- a/gitweb/README +++ b/gitweb/README @@ -7,413 +7,65 @@ The one working on: From the git version 1.4.0 gitweb is bundled with git. -Runtime gitweb configuration ----------------------------- - -You can adjust gitweb behaviour using the file specified in `GITWEB_CONFIG` -(defaults to 'gitweb_config.perl' in the same directory as the CGI), and -as a fallback `GITWEB_CONFIG_SYSTEM` (defaults to /etc/gitweb.conf). -The most notable thing that is not configurable at compile time are the -optional features, stored in the '%features' variable. - -Ultimate description on how to reconfigure the default features setting -in your `GITWEB_CONFIG` or per-project in `project.git/config` can be found -as comments inside 'gitweb.cgi'. - -See also the "Gitweb config file" (with an example of config file), and -the "Gitweb repositories" sections in INSTALL file for gitweb. - - -The gitweb config file is a fragment of perl code. You can set variables -using "our $variable = value"; text from "#" character until the end -of a line is ignored. See perlsyn(1) man page for details. - -Below is the list of variables which you might want to set in gitweb config. -See the top of 'gitweb.cgi' for the full list of variables and their -descriptions. - -Gitweb config file variables -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -You can set, among others, the following variables in gitweb config files -(with the exception of $projectroot and $projects_list this list does -not include variables usually directly set during build): - * $GIT - Core git executable to use. By default set to "$GIT_BINDIR/git", which - in turn is by default set to "$(bindir)/git". If you use git from binary - package, set this to "/usr/bin/git". This can just be "git" if your - webserver has a sensible PATH. If you have multiple git versions - installed it can be used to choose which one to use. - * $version - Gitweb version, set automatically when creating gitweb.cgi from - gitweb.perl. You might want to modify it if you are running modified - gitweb. - * $projectroot - Absolute filesystem path which will be prepended to project path; - the path to repository is $projectroot/$project. Set to - $GITWEB_PROJECTROOT during installation. This variable have to be - set correctly for gitweb to find repositories. - * $projects_list - Source of projects list, either directory to scan, or text file - with list of repositories (in the "<URI-encoded repository path> SP - <URI-encoded repository owner>" line format; actually there can be - any sequence of whitespace in place of space (SP)). Set to - $GITWEB_LIST during installation. If empty, $projectroot is used - to scan for repositories. - * $my_url, $my_uri - Full URL and absolute URL of gitweb script; - in earlier versions of gitweb you might have need to set those - variables, now there should be no need to do it. See - $per_request_config if you need to set them still. - * $base_url - Base URL for relative URLs in pages generated by gitweb, - (e.g. $logo, $favicon, @stylesheets if they are relative URLs), - needed and used only for URLs with nonempty PATH_INFO via - <base href="$base_url">. Usually gitweb sets its value correctly, - and there is no need to set this variable, e.g. to $my_uri or "/". - See $per_request_config if you need to set it anyway. - * $home_link - Target of the home link on top of all pages (the first part of view - "breadcrumbs"). By default set to absolute URI of a page ($my_uri). - * @stylesheets - List of URIs of stylesheets (relative to base URI of a page). You - might specify more than one stylesheet, for example use gitweb.css - as base, with site specific modifications in separate stylesheet - to make it easier to upgrade gitweb. You can add 'site' stylesheet - for example by using - push @stylesheets, "gitweb-site.css"; - in the gitweb config file. - * $logo_url, $logo_label - URI and label (title) of GIT logo link (or your site logo, if you choose - to use different logo image). By default they point to git homepage; - in the past they pointed to git documentation at www.kernel.org. - * $projects_list_description_width - The width (in characters) of the projects list "Description" column. - Longer descriptions will be cut (trying to cut at word boundary); - full description is available as 'title' attribute (usually shown on - mouseover). By default set to 25, which might be too small if you - use long project descriptions. - * $projects_list_group_categories - Enables the grouping of projects by category on the project list page. - The category of a project is determined by the $GIT_DIR/category - file or the 'gitweb.category' variable in its repository configuration. - Disabled by default. - * $project_list_default_category - Default category for projects for which none is specified. If set - to the empty string, such projects will remain uncategorized and - listed at the top, above categorized projects. - * @git_base_url_list - List of git base URLs used for URL to where fetch project from, shown - in project summary page. Full URL is "$git_base_url/$project". - You can setup multiple base URLs (for example one for git:// protocol - access, and one for http:// "dumb" protocol access). Note that per - repository configuration in 'cloneurl' file, or as values of gitweb.url - project config. - * $default_blob_plain_mimetype - Default mimetype for blob_plain (raw) view, if mimetype checking - doesn't result in some other type; by default 'text/plain'. - * $default_text_plain_charset - Default charset for text files. If not set, web server configuration - would be used. - * $mimetypes_file - File to use for (filename extension based) guessing of MIME types before - trying /etc/mime.types. Path, if relative, is taken currently as - relative to the current git repository. - * $fallback_encoding - Gitweb assumes this charset if line contains non-UTF-8 characters. - Fallback decoding is used without error checking, so it can be even - 'utf-8'. Value must be valid encoding; see Encoding::Supported(3pm) man - page for a list. By default 'latin1', aka. 'iso-8859-1'. - * @diff_opts - Rename detection options for git-diff and git-diff-tree. By default - ('-M'); set it to ('-C') or ('-C', '-C') to also detect copies, or - set it to () if you don't want to have renames detection. - * $prevent_xss - If true, some gitweb features are disabled to prevent content in - repositories from launching cross-site scripting (XSS) attacks. Set this - to true if you don't trust the content of your repositories. The default - is false. - * $maxload - Used to set the maximum load that we will still respond to gitweb queries. - If server load exceed this value then return "503 Service Unavailable" error. - Server load is taken to be 0 if gitweb cannot determine its value. Set it to - undefined value to turn it off. The default is 300. - * $highlight_bin - Path to the highlight executable to use (must be the one from - http://www.andre-simon.de due to assumptions about parameters and output). - Useful if highlight is not installed on your webserver's PATH. - [Default: highlight] - * $per_request_config - If set to code reference, it would be run once per each request. You can - set parts of configuration that change per session, e.g. by setting it to - sub { $ENV{GL_USER} = $cgi->remote_user || "gitweb"; } - Otherwise it is treated as boolean value: if true gitweb would process - config file once per request, if false it would process config file only - once. Note: $my_url, $my_uri, and $base_url are overwritten with - their default values before every request, so if you want to change - them, be sure to set this variable to true or a code reference effecting - the desired changes. The default is true. - -Projects list file format -~~~~~~~~~~~~~~~~~~~~~~~~~ - -Instead of having gitweb find repositories by scanning filesystem starting -from $projectroot (or $projects_list, if it points to directory), you can -provide list of projects by setting $projects_list to a text file with list -of projects (and some additional info). This file uses the following -format: - -One record (for project / repository) per line, whitespace separated fields; -does not support (at least for now) lines continuation (newline escaping). -Leading and trailing whitespace are ignored, any run of whitespace can be -used as field separator (rules for Perl's "split(' ', $line)"). Keyed by -the first field, which is project name, i.e. path to repository GIT_DIR -relative to $projectroot. Fields use modified URI encoding, defined in -RFC 3986, section 2.1 (Percent-Encoding), or rather "Query string encoding" -(see http://en.wikipedia.org/wiki/Query_string#URL_encoding), the difference -being that SP (' ') can be encoded as '+' (and therefore '+' has to be also -percent-encoded). Reserved characters are: '%' (used for encoding), '+' -(can be used to encode SPACE), all whitespace characters as defined in Perl, -including SP, TAB and LF, (used to separate fields in a record). - -Currently list of fields is - * <repository path> - path to repository GIT_DIR, relative to $projectroot - * <repository owner> - displayed as repository owner, preferably full name, - or email, or both - -You can additionally use $projects_list file to limit which repositories -are visible, and together with $strict_export to limit access to -repositories (see "Gitweb repositories" section in gitweb/INSTALL). - - -Per-repository gitweb configuration -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -You can also configure individual repositories shown in gitweb by creating -file in the GIT_DIR of git repository, or by setting some repo configuration -variable (in GIT_DIR/config). - -You can use the following files in repository: - * README.html - A .html file (HTML fragment) which is included on the gitweb project - summary page inside <div> block element. You can use it for longer - description of a project, to provide links (for example to project's - homepage), etc. This is recognized only if XSS prevention is off - ($prevent_xss is false); a way to include a readme safely when XSS - prevention is on may be worked out in the future. - * description (or gitweb.description) - Short (shortened by default to 25 characters in the projects list page) - single line description of a project (of a repository). Plain text file; - HTML will be escaped. By default set to - Unnamed repository; edit this file to name it for gitweb. - from the template during repository creation. You can use the - gitweb.description repo configuration variable, but the file takes - precedence. - * category (or gitweb.category) - Singe line category of a project, used to group projects if - $projects_list_group_categories is enabled. By default (file and - configuration variable absent), uncategorized projects are put in - the $project_list_default_category category. You can use the - gitweb.category repo configuration variable, but the file takes - precedence. - * cloneurl (or multiple-valued gitweb.url) - File with repository URL (used for clone and fetch), one per line. - Displayed in the project summary page. You can use multiple-valued - gitweb.url repository configuration variable for that, but the file - takes precedence. - * gitweb.owner - You can use the gitweb.owner repository configuration variable to set - repository's owner. It is displayed in the project list and summary - page. If it's not set, filesystem directory's owner is used - (via GECOS field / real name field from getpwiud(3)). - * various gitweb.* config variables (in config) - Read description of %feature hash for detailed list, and some - descriptions. - - -Webserver configuration ------------------------ - -If you want to have one URL for both gitweb and your http:// -repositories, you can configure apache like this: - -<VirtualHost *:80> - ServerName git.example.org - DocumentRoot /pub/git - SetEnv GITWEB_CONFIG /etc/gitweb.conf - - # turning on mod rewrite - RewriteEngine on - - # make the front page an internal rewrite to the gitweb script - RewriteRule ^/$ /cgi-bin/gitweb.cgi - - # make access for "dumb clients" work - RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] -</VirtualHost> - -The above configuration expects your public repositories to live under -/pub/git and will serve them as http://git.domain.org/dir-under-pub-git, -both as cloneable GIT URL and as browseable gitweb interface. -If you then start your git-daemon with --base-path=/pub/git --export-all -then you can even use the git:// URL with exactly the same path. - -Setting the environment variable GITWEB_CONFIG will tell gitweb to use -the named file (i.e. in this example /etc/gitweb.conf) as a -configuration for gitweb. Perl variables defined in here will -override the defaults given at the head of the gitweb.perl (or -gitweb.cgi). Look at the comments in that file for information on -which variables and what they mean. - -If you use the rewrite rules from the example you'll likely also need -something like the following in your gitweb.conf (or gitweb_config.perl) file: - - @stylesheets = ("/some/absolute/path/gitweb.css"); - $my_uri = "/"; - $home_link = "/"; - - -Webserver configuration with multiple projects' root ----------------------------------------------------- +Build time gitweb configuration +------------------------------- +There are many configuration variables which affect building gitweb (among +others creating gitweb.cgi out of gitweb.perl by replacing placeholders such +as `++GIT_BINDIR++` by their build-time values). -If you want to use gitweb with several project roots you can edit your apache -virtual host and gitweb.conf configuration files like this : +Building and installing gitweb is described in gitweb's INSTALL file +(in 'gitweb/INSTALL'). -virtual host configuration : -<VirtualHost *:80> - ServerName git.example.org - DocumentRoot /pub/git - SetEnv GITWEB_CONFIG /etc/gitweb.conf - - # turning on mod rewrite - RewriteEngine on - - # make the front page an internal rewrite to the gitweb script - RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT] - - # look for a public_git folder in unix users' home - # http://git.example.org/~<user>/ - RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] - - # http://git.example.org/+<user>/ - #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] - - # http://git.example.org/user/<user>/ - #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] - - # defined list of project roots - RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT] - RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT] - - # make access for "dumb clients" work - RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] -</VirtualHost> - -gitweb.conf configuration : - -$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; - -These configurations enable two things. First, each unix user (<user>) of the -server will be able to browse through gitweb git repositories found in -~/public_git/ with the following url : http://git.example.org/~<user>/ - -If you do not want this feature on your server just remove the second rewrite rule. - -If you already use mod_userdir in your virtual host or you don't want to use -the '~' as first character just comment or remove the second rewrite rule and -uncomment one of the following according to what you want. - -Second, repositories found in /pub/scm/ and /var/git/ will be accesible -through http://git.example.org/scm/ and http://git.example.org/var/. -You can add as many project roots as you want by adding rewrite rules like the -third and the fourth. - - -PATH_INFO usage ------------------------ -If you enable PATH_INFO usage in gitweb by putting - - $feature{'pathinfo'}{'default'} = [1]; - -in your gitweb.conf, it is possible to set up your server so that it -consumes and produces URLs in the form - -http://git.example.com/project.git/shortlog/sometag - -by using a configuration such as the following, that assumes that -/var/www/gitweb is the DocumentRoot of your webserver, and that it -contains the gitweb.cgi script and complementary static files -(stylesheet, favicon): - -<VirtualHost *:80> - ServerAlias git.example.com - - DocumentRoot /var/www/gitweb - - <Directory /var/www/gitweb> - Options ExecCGI - AddHandler cgi-script cgi - - DirectoryIndex gitweb.cgi - - RewriteEngine On - RewriteCond %{REQUEST_FILENAME} !-f - RewriteCond %{REQUEST_FILENAME} !-d - RewriteRule ^.* /gitweb.cgi/$0 [L,PT] - </Directory> -</VirtualHost> - -The rewrite rule guarantees that existing static files will be properly -served, whereas any other URL will be passed to gitweb as PATH_INFO -parameter. - -Notice that in this case you don't need special settings for -@stylesheets, $my_uri and $home_link, but you lose "dumb client" access -to your project .git dirs. A possible workaround for the latter is the -following: in your project root dir (e.g. /pub/git) have the projects -named without a .git extension (e.g. /pub/git/project instead of -/pub/git/project.git) and configure Apache as follows: - -<VirtualHost *:80> - ServerAlias git.example.com - - DocumentRoot /var/www/gitweb - - AliasMatch ^(/.*?)(\.git)(/.*)?$ /pub/git$1$3 - <Directory /var/www/gitweb> - Options ExecCGI - AddHandler cgi-script cgi +Runtime gitweb configuration +---------------------------- +Gitweb obtains configuration data from the following sources in the +following order: - DirectoryIndex gitweb.cgi +1. built-in values (some set during build stage), +2. common system-wide configuration file (`GITWEB_CONFIG_COMMON`, + defaults to '/etc/gitweb-common.conf'), +3. either per-instance configuration file (`GITWEB_CONFIG`, defaults to + 'gitweb_config.perl' in the same directory as the installed gitweb), + or if it does not exists then system-wide configuration file + (`GITWEB_CONFIG_SYSTEM`, defaults to '/etc/gitweb.conf'). - RewriteEngine On - RewriteCond %{REQUEST_FILENAME} !-f - RewriteCond %{REQUEST_FILENAME} !-d - RewriteRule ^.* /gitweb.cgi/$0 [L,PT] - </Directory> -</VirtualHost> +Values obtained in later configuration files override values obtained earlier +in above sequence. -The additional AliasMatch makes it so that +You can read defaults in system-wide GITWEB_CONFIG_SYSTEM from GITWEB_CONFIG +by adding -http://git.example.com/project.git + read_config_file($GITWEB_CONFIG_SYSTEM); -will give raw access to the project's git dir (so that the project can -be cloned), while +at very beginning of per-instance GITWEB_CONFIG file. In this case +settings in said per-instance file will override settings from +system-wide configuration file. Note that read_config_file checks +itself that the $GITWEB_CONFIG_SYSTEM file exists. -http://git.example.com/project +The most notable thing that is not configurable at compile time are the +optional features, stored in the '%features' variable. -will provide human-friendly gitweb access. +Ultimate description on how to reconfigure the default features setting +in your `GITWEB_CONFIG` or per-project in `project.git/config` can be found +as comments inside 'gitweb.cgi'. -This solution is not 100% bulletproof, in the sense that if some project -has a named ref (branch, tag) starting with 'git/', then paths such as +See also gitweb.conf(5) manpage. -http://git.example.com/project/command/abranch..git/abranch -will fail with a 404 error. +Web server configuration +------------------------ +Gitweb can be run as CGI script, as legacy mod_perl application (using +ModPerl::Registry), and as FastCGI script. You can find some simple examples +in "Example web server configuration" section in INSTALL file for gitweb (in +gitweb/INSTALL). +See "Webserver configuration" and "Advanced web server setup" sections in +gitweb(1) manpage. +AUTHORS +------- Originally written by: Kay Sievers <kay.sievers@vrfy.org> diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 50a835a5bf..4f0c3bd90c 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -85,6 +85,8 @@ our $home_link_str = "++GITWEB_HOME_LINK_STR++"; our $site_name = "++GITWEB_SITENAME++" || ($ENV{'SERVER_NAME'} || "Untitled") . " Git"; +# html snippet to include in the <head> section of each page +our $site_html_head_string = "++GITWEB_SITE_HTML_HEAD_STRING++"; # filename of html text to include at top of each page our $site_header = "++GITWEB_SITE_HEADER++"; # html text to include at home page @@ -321,6 +323,10 @@ our %feature = ( # Enable text search, which will list the commits which match author, # committer or commit text to a given string. Enabled by default. # Project specific override is not supported. + # + # Note that this controls all search features, which means that if + # it is disabled, then 'grep' and 'pickaxe' search would also be + # disabled. 'search' => { 'override' => 0, 'default' => [1]}, @@ -661,13 +667,25 @@ sub read_config_file { return; } -our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM); +our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM, $GITWEB_CONFIG_COMMON); sub evaluate_gitweb_config { our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++"; our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++"; + our $GITWEB_CONFIG_COMMON = $ENV{'GITWEB_CONFIG_COMMON'} || "++GITWEB_CONFIG_COMMON++"; + + # Protect agains duplications of file names, to not read config twice. + # Only one of $GITWEB_CONFIG and $GITWEB_CONFIG_SYSTEM is used, so + # there possibility of duplication of filename there doesn't matter. + $GITWEB_CONFIG = "" if ($GITWEB_CONFIG eq $GITWEB_CONFIG_COMMON); + $GITWEB_CONFIG_SYSTEM = "" if ($GITWEB_CONFIG_SYSTEM eq $GITWEB_CONFIG_COMMON); + + # Common system-wide settings for convenience. + # Those settings can be ovverriden by GITWEB_CONFIG or GITWEB_CONFIG_SYSTEM. + read_config_file($GITWEB_CONFIG_COMMON); - # use first config file that exists - read_config_file($GITWEB_CONFIG) or + # Use first config file that exists. This means use the per-instance + # GITWEB_CONFIG if exists, otherwise use GITWEB_SYSTEM_CONFIG. + read_config_file($GITWEB_CONFIG) and return; read_config_file($GITWEB_CONFIG_SYSTEM); } @@ -1501,6 +1519,17 @@ sub esc_path { return $str; } +# Sanitize for use in XHTML + application/xml+xhtm (valid XML 1.0) +sub sanitize { + my $str = shift; + + return undef unless defined $str; + + $str = to_utf8($str); + $str =~ s|([[:cntrl:]])|($1 =~ /[\t\n\r]/ ? $1 : quot_cec($1))|eg; + return $str; +} + # Make control characters "printable", using character escape codes (CEC) sub quot_cec { my $cntrl = shift; @@ -2510,6 +2539,13 @@ sub git_get_project_config { # key sanity check return unless ($key); + # only subsection, if exists, is case sensitive, + # and not lowercased by 'git config -z -l' + if (my ($hi, $mi, $lo) = ($key =~ /^([^.]*)\.(.*)\.([^.]*)$/)) { + $key = join(".", lc($hi), $mi, lc($lo)); + } else { + $key = lc($key); + } $key =~ s/^gitweb\.//; return if ($key =~ m/\W/); @@ -2852,7 +2888,7 @@ sub filter_forks_from_projects_list { $path =~ s/\.git$//; # forks of 'repo.git' are in 'repo/' directory next if ($path =~ m!/$!); # skip non-bare repositories, e.g. 'repo/.git' next unless ($path); # skip '.git' repository: tests, git-instaweb - next unless (-d $path); # containing directory exists + next unless (-d "$projectroot/$path"); # containing directory exists $pr->{'forks'} = []; # there can be 0 or more forks of project # add to trie @@ -3562,12 +3598,9 @@ sub mimetype_guess_file { open(my $mh, '<', $mimemap) or return undef; while (<$mh>) { next if m/^#/; # skip comments - my ($mimetype, $exts) = split(/\t+/); - if (defined $exts) { - my @exts = split(/\s+/, $exts); - foreach my $ext (@exts) { - $mimemap{$ext} = $mimetype; - } + my ($mimetype, @exts) = split(/\s+/); + foreach my $ext (@exts) { + $mimemap{$ext} = $mimetype; } } close($mh); @@ -3683,6 +3716,20 @@ sub get_page_title { return $title; } +sub get_content_type_html { + # require explicit support from the UA if we are to send the page as + # 'application/xhtml+xml', otherwise send it as plain old 'text/html'. + # we have to do this because MSIE sometimes globs '*/*', pretending to + # support xhtml+xml but choking when it gets what it asked for. + if (defined $cgi->http('HTTP_ACCEPT') && + $cgi->http('HTTP_ACCEPT') =~ m/(,|;|\s|^)application\/xhtml\+xml(,|;|\s|$)/ && + $cgi->Accept('application/xhtml+xml') != 0) { + return 'application/xhtml+xml'; + } else { + return 'text/html'; + } +} + sub print_feed_meta { if (defined $project) { my %href_params = get_feed_info(); @@ -3728,24 +3775,90 @@ sub print_feed_meta { } } +sub print_header_links { + my $status = shift; + + # print out each stylesheet that exist, providing backwards capability + # for those people who defined $stylesheet in a config file + if (defined $stylesheet) { + print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n"; + } else { + foreach my $stylesheet (@stylesheets) { + next unless $stylesheet; + print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n"; + } + } + print_feed_meta() + if ($status eq '200 OK'); + if (defined $favicon) { + print qq(<link rel="shortcut icon" href=").esc_url($favicon).qq(" type="image/png" />\n); + } +} + +sub print_nav_breadcrumbs { + my %opts = @_; + + print $cgi->a({-href => esc_url($home_link)}, $home_link_str) . " / "; + if (defined $project) { + print $cgi->a({-href => href(action=>"summary")}, esc_html($project)); + if (defined $action) { + my $action_print = $action ; + if (defined $opts{-action_extra}) { + $action_print = $cgi->a({-href => href(action=>$action)}, + $action); + } + print " / $action_print"; + } + if (defined $opts{-action_extra}) { + print " / $opts{-action_extra}"; + } + print "\n"; + } +} + +sub print_search_form { + if (!defined $searchtext) { + $searchtext = ""; + } + my $search_hash; + if (defined $hash_base) { + $search_hash = $hash_base; + } elsif (defined $hash) { + $search_hash = $hash; + } else { + $search_hash = "HEAD"; + } + my $action = $my_uri; + my $use_pathinfo = gitweb_check_feature('pathinfo'); + if ($use_pathinfo) { + $action .= "/".esc_url($project); + } + print $cgi->startform(-method => "get", -action => $action) . + "<div class=\"search\">\n" . + (!$use_pathinfo && + $cgi->input({-name=>"p", -value=>$project, -type=>"hidden"}) . "\n") . + $cgi->input({-name=>"a", -value=>"search", -type=>"hidden"}) . "\n" . + $cgi->input({-name=>"h", -value=>$search_hash, -type=>"hidden"}) . "\n" . + $cgi->popup_menu(-name => 'st', -default => 'commit', + -values => ['commit', 'grep', 'author', 'committer', 'pickaxe']) . + $cgi->sup($cgi->a({-href => href(action=>"search_help")}, "?")) . + " search:\n", + $cgi->textfield(-name => "s", -value => $searchtext) . "\n" . + "<span title=\"Extended regular expression\">" . + $cgi->checkbox(-name => 'sr', -value => 1, -label => 're', + -checked => $search_use_regexp) . + "</span>" . + "</div>" . + $cgi->end_form() . "\n"; +} + sub git_header_html { my $status = shift || "200 OK"; my $expires = shift; my %opts = @_; my $title = get_page_title(); - my $content_type; - # require explicit support from the UA if we are to send the page as - # 'application/xhtml+xml', otherwise send it as plain old 'text/html'. - # we have to do this because MSIE sometimes globs '*/*', pretending to - # support xhtml+xml but choking when it gets what it asked for. - if (defined $cgi->http('HTTP_ACCEPT') && - $cgi->http('HTTP_ACCEPT') =~ m/(,|;|\s|^)application\/xhtml\+xml(,|;|\s|$)/ && - $cgi->Accept('application/xhtml+xml') != 0) { - $content_type = 'application/xhtml+xml'; - } else { - $content_type = 'text/html'; - } + my $content_type = get_content_type_html(); print $cgi->header(-type=>$content_type, -charset => 'utf-8', -status=> $status, -expires => $expires) unless ($opts{'-no_http_header'}); @@ -3767,20 +3880,10 @@ EOF if ($ENV{'PATH_INFO'}) { print "<base href=\"".esc_url($base_url)."\" />\n"; } - # print out each stylesheet that exist, providing backwards capability - # for those people who defined $stylesheet in a config file - if (defined $stylesheet) { - print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n"; - } else { - foreach my $stylesheet (@stylesheets) { - next unless $stylesheet; - print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n"; - } - } - print_feed_meta() - if ($status eq '200 OK'); - if (defined $favicon) { - print qq(<link rel="shortcut icon" href=").esc_url($favicon).qq(" type="image/png" />\n); + print_header_links($status); + + if (defined $site_html_head_string) { + print to_utf8($site_html_head_string); } print "</head>\n" . @@ -3799,59 +3902,12 @@ EOF -alt => "git", -class => "logo"})); } - print $cgi->a({-href => esc_url($home_link)}, $home_link_str) . " / "; - if (defined $project) { - print $cgi->a({-href => href(action=>"summary")}, esc_html($project)); - if (defined $action) { - my $action_print = $action ; - if (defined $opts{-action_extra}) { - $action_print = $cgi->a({-href => href(action=>$action)}, - $action); - } - print " / $action_print"; - } - if (defined $opts{-action_extra}) { - print " / $opts{-action_extra}"; - } - print "\n"; - } + print_nav_breadcrumbs(%opts); print "</div>\n"; my $have_search = gitweb_check_feature('search'); if (defined $project && $have_search) { - if (!defined $searchtext) { - $searchtext = ""; - } - my $search_hash; - if (defined $hash_base) { - $search_hash = $hash_base; - } elsif (defined $hash) { - $search_hash = $hash; - } else { - $search_hash = "HEAD"; - } - my $action = $my_uri; - my $use_pathinfo = gitweb_check_feature('pathinfo'); - if ($use_pathinfo) { - $action .= "/".esc_url($project); - } - print $cgi->startform(-method => "get", -action => $action) . - "<div class=\"search\">\n" . - (!$use_pathinfo && - $cgi->input({-name=>"p", -value=>$project, -type=>"hidden"}) . "\n") . - $cgi->input({-name=>"a", -value=>"search", -type=>"hidden"}) . "\n" . - $cgi->input({-name=>"h", -value=>$search_hash, -type=>"hidden"}) . "\n" . - $cgi->popup_menu(-name => 'st', -default => 'commit', - -values => ['commit', 'grep', 'author', 'committer', 'pickaxe']) . - $cgi->sup($cgi->a({-href => href(action=>"search_help")}, "?")) . - " search:\n", - $cgi->textfield(-name => "s", -value => $searchtext) . "\n" . - "<span title=\"Extended regular expression\">" . - $cgi->checkbox(-name => 'sr', -value => 1, -label => 're', - -checked => $search_use_regexp) . - "</span>" . - "</div>" . - $cgi->end_form() . "\n"; + print_search_form(); } } @@ -5506,6 +5562,216 @@ sub git_remotes_body { } } +sub git_search_message { + my %co = @_; + + my $greptype; + if ($searchtype eq 'commit') { + $greptype = "--grep="; + } elsif ($searchtype eq 'author') { + $greptype = "--author="; + } elsif ($searchtype eq 'committer') { + $greptype = "--committer="; + } + $greptype .= $searchtext; + my @commitlist = parse_commits($hash, 101, (100 * $page), undef, + $greptype, '--regexp-ignore-case', + $search_use_regexp ? '--extended-regexp' : '--fixed-strings'); + + my $paging_nav = ''; + if ($page > 0) { + $paging_nav .= + $cgi->a({-href => href(-replay=>1, page=>undef)}, + "first") . + " ⋅ " . + $cgi->a({-href => href(-replay=>1, page=>$page-1), + -accesskey => "p", -title => "Alt-p"}, "prev"); + } else { + $paging_nav .= "first ⋅ prev"; + } + my $next_link = ''; + if ($#commitlist >= 100) { + $next_link = + $cgi->a({-href => href(-replay=>1, page=>$page+1), + -accesskey => "n", -title => "Alt-n"}, "next"); + $paging_nav .= " ⋅ $next_link"; + } else { + $paging_nav .= " ⋅ next"; + } + + git_header_html(); + + git_print_page_nav('','', $hash,$co{'tree'},$hash, $paging_nav); + git_print_header_div('commit', esc_html($co{'title'}), $hash); + if ($page == 0 && !@commitlist) { + print "<p>No match.</p>\n"; + } else { + git_search_grep_body(\@commitlist, 0, 99, $next_link); + } + + git_footer_html(); +} + +sub git_search_changes { + my %co = @_; + + local $/ = "\n"; + open my $fd, '-|', git_cmd(), '--no-pager', 'log', @diff_opts, + '--pretty=format:%H', '--no-abbrev', '--raw', "-S$searchtext", + ($search_use_regexp ? '--pickaxe-regex' : ()) + or die_error(500, "Open git-log failed"); + + git_header_html(); + + git_print_page_nav('','', $hash,$co{'tree'},$hash); + git_print_header_div('commit', esc_html($co{'title'}), $hash); + + print "<table class=\"pickaxe search\">\n"; + my $alternate = 1; + undef %co; + my @files; + while (my $line = <$fd>) { + chomp $line; + next unless $line; + + my %set = parse_difftree_raw_line($line); + if (defined $set{'commit'}) { + # finish previous commit + if (%co) { + print "</td>\n" . + "<td class=\"link\">" . + $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})}, + "commit") . + " | " . + $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'}, + hash_base=>$co{'id'})}, + "tree") . + "</td>\n" . + "</tr>\n"; + } + + if ($alternate) { + print "<tr class=\"dark\">\n"; + } else { + print "<tr class=\"light\">\n"; + } + $alternate ^= 1; + %co = parse_commit($set{'commit'}); + my $author = chop_and_escape_str($co{'author_name'}, 15, 5); + print "<td title=\"$co{'age_string_age'}\"><i>$co{'age_string_date'}</i></td>\n" . + "<td><i>$author</i></td>\n" . + "<td>" . + $cgi->a({-href => href(action=>"commit", hash=>$co{'id'}), + -class => "list subject"}, + chop_and_escape_str($co{'title'}, 50) . "<br/>"); + } elsif (defined $set{'to_id'}) { + next if ($set{'to_id'} =~ m/^0{40}$/); + + print $cgi->a({-href => href(action=>"blob", hash_base=>$co{'id'}, + hash=>$set{'to_id'}, file_name=>$set{'to_file'}), + -class => "list"}, + "<span class=\"match\">" . esc_path($set{'file'}) . "</span>") . + "<br/>\n"; + } + } + close $fd; + + # finish last commit (warning: repetition!) + if (%co) { + print "</td>\n" . + "<td class=\"link\">" . + $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})}, + "commit") . + " | " . + $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'}, + hash_base=>$co{'id'})}, + "tree") . + "</td>\n" . + "</tr>\n"; + } + + print "</table>\n"; + + git_footer_html(); +} + +sub git_search_files { + my %co = @_; + + local $/ = "\n"; + open my $fd, "-|", git_cmd(), 'grep', '-n', + $search_use_regexp ? ('-E', '-i') : '-F', + $searchtext, $co{'tree'} + or die_error(500, "Open git-grep failed"); + + git_header_html(); + + git_print_page_nav('','', $hash,$co{'tree'},$hash); + git_print_header_div('commit', esc_html($co{'title'}), $hash); + + print "<table class=\"grep_search\">\n"; + my $alternate = 1; + my $matches = 0; + my $lastfile = ''; + while (my $line = <$fd>) { + chomp $line; + my ($file, $lno, $ltext, $binary); + last if ($matches++ > 1000); + if ($line =~ /^Binary file (.+) matches$/) { + $file = $1; + $binary = 1; + } else { + (undef, $file, $lno, $ltext) = split(/:/, $line, 4); + } + if ($file ne $lastfile) { + $lastfile and print "</td></tr>\n"; + if ($alternate++) { + print "<tr class=\"dark\">\n"; + } else { + print "<tr class=\"light\">\n"; + } + print "<td class=\"list\">". + $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'}, + file_name=>"$file"), + -class => "list"}, esc_path($file)); + print "</td><td>\n"; + $lastfile = $file; + } + if ($binary) { + print "<div class=\"binary\">Binary file</div>\n"; + } else { + $ltext = untabify($ltext); + if ($ltext =~ m/^(.*)($search_regexp)(.*)$/i) { + $ltext = esc_html($1, -nbsp=>1); + $ltext .= '<span class="match">'; + $ltext .= esc_html($2, -nbsp=>1); + $ltext .= '</span>'; + $ltext .= esc_html($3, -nbsp=>1); + } else { + $ltext = esc_html($ltext, -nbsp=>1); + } + print "<div class=\"pre\">" . + $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'}, + file_name=>"$file").'#l'.$lno, + -class => "linenr"}, sprintf('%4i', $lno)) + . ' ' . $ltext . "</div>\n"; + } + } + if ($lastfile) { + print "</td></tr>\n"; + if ($matches > 1000) { + print "<div class=\"diff nodifferences\">Too many matches, listing trimmed</div>\n"; + } + } else { + print "<div class=\"diff nodifferences\">No matches found</div>\n"; + } + close $fd; + + print "</table>\n"; + + git_footer_html(); +} + sub git_search_grep_body { my ($commitlist, $from, $to, $extra) = @_; $from = 0 unless defined $from; @@ -6236,7 +6502,8 @@ sub git_blob { $nr++; $line = untabify($line); printf qq!<div class="pre"><a id="l%i" href="%s#l%i" class="linenr">%4i</a> %s</div>\n!, - $nr, esc_attr(href(-replay => 1)), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1); + $nr, esc_attr(href(-replay => 1)), $nr, $nr, + $syntax ? sanitize($line) : esc_html($line, -nbsp=>1); } } close $fd @@ -7061,7 +7328,23 @@ sub git_history { } sub git_search { - gitweb_check_feature('search') or die_error(403, "Search is disabled"); + $searchtype ||= 'commit'; + + # check if appropriate features are enabled + gitweb_check_feature('search') + or die_error(403, "Search is disabled"); + if ($searchtype eq 'pickaxe') { + # pickaxe may take all resources of your box and run for several minutes + # with every query - so decide by yourself how public you make this feature + gitweb_check_feature('pickaxe') + or die_error(403, "Pickaxe search is disabled"); + } + if ($searchtype eq 'grep') { + # grep search might be potentially CPU-intensive, too + gitweb_check_feature('grep') + or die_error(403, "Grep search is disabled"); + } + if (!defined $searchtext) { die_error(400, "Text field is empty"); } @@ -7076,205 +7359,17 @@ sub git_search { $page = 0; } - $searchtype ||= 'commit'; - if ($searchtype eq 'pickaxe') { - # pickaxe may take all resources of your box and run for several minutes - # with every query - so decide by yourself how public you make this feature - gitweb_check_feature('pickaxe') - or die_error(403, "Pickaxe is disabled"); - } - if ($searchtype eq 'grep') { - gitweb_check_feature('grep') - or die_error(403, "Grep is disabled"); - } - - git_header_html(); - - if ($searchtype eq 'commit' or $searchtype eq 'author' or $searchtype eq 'committer') { - my $greptype; - if ($searchtype eq 'commit') { - $greptype = "--grep="; - } elsif ($searchtype eq 'author') { - $greptype = "--author="; - } elsif ($searchtype eq 'committer') { - $greptype = "--committer="; - } - $greptype .= $searchtext; - my @commitlist = parse_commits($hash, 101, (100 * $page), undef, - $greptype, '--regexp-ignore-case', - $search_use_regexp ? '--extended-regexp' : '--fixed-strings'); - - my $paging_nav = ''; - if ($page > 0) { - $paging_nav .= - $cgi->a({-href => href(action=>"search", hash=>$hash, - searchtext=>$searchtext, - searchtype=>$searchtype)}, - "first"); - $paging_nav .= " ⋅ " . - $cgi->a({-href => href(-replay=>1, page=>$page-1), - -accesskey => "p", -title => "Alt-p"}, "prev"); - } else { - $paging_nav .= "first"; - $paging_nav .= " ⋅ prev"; - } - my $next_link = ''; - if ($#commitlist >= 100) { - $next_link = - $cgi->a({-href => href(-replay=>1, page=>$page+1), - -accesskey => "n", -title => "Alt-n"}, "next"); - $paging_nav .= " ⋅ $next_link"; - } else { - $paging_nav .= " ⋅ next"; - } - - git_print_page_nav('','', $hash,$co{'tree'},$hash, $paging_nav); - git_print_header_div('commit', esc_html($co{'title'}), $hash); - if ($page == 0 && !@commitlist) { - print "<p>No match.</p>\n"; - } else { - git_search_grep_body(\@commitlist, 0, 99, $next_link); - } - } - - if ($searchtype eq 'pickaxe') { - git_print_page_nav('','', $hash,$co{'tree'},$hash); - git_print_header_div('commit', esc_html($co{'title'}), $hash); - - print "<table class=\"pickaxe search\">\n"; - my $alternate = 1; - local $/ = "\n"; - open my $fd, '-|', git_cmd(), '--no-pager', 'log', @diff_opts, - '--pretty=format:%H', '--no-abbrev', '--raw', "-S$searchtext", - ($search_use_regexp ? '--pickaxe-regex' : ()); - undef %co; - my @files; - while (my $line = <$fd>) { - chomp $line; - next unless $line; - - my %set = parse_difftree_raw_line($line); - if (defined $set{'commit'}) { - # finish previous commit - if (%co) { - print "</td>\n" . - "<td class=\"link\">" . - $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})}, "commit") . - " | " . - $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'}, hash_base=>$co{'id'})}, "tree"); - print "</td>\n" . - "</tr>\n"; - } - - if ($alternate) { - print "<tr class=\"dark\">\n"; - } else { - print "<tr class=\"light\">\n"; - } - $alternate ^= 1; - %co = parse_commit($set{'commit'}); - my $author = chop_and_escape_str($co{'author_name'}, 15, 5); - print "<td title=\"$co{'age_string_age'}\"><i>$co{'age_string_date'}</i></td>\n" . - "<td><i>$author</i></td>\n" . - "<td>" . - $cgi->a({-href => href(action=>"commit", hash=>$co{'id'}), - -class => "list subject"}, - chop_and_escape_str($co{'title'}, 50) . "<br/>"); - } elsif (defined $set{'to_id'}) { - next if ($set{'to_id'} =~ m/^0{40}$/); - - print $cgi->a({-href => href(action=>"blob", hash_base=>$co{'id'}, - hash=>$set{'to_id'}, file_name=>$set{'to_file'}), - -class => "list"}, - "<span class=\"match\">" . esc_path($set{'file'}) . "</span>") . - "<br/>\n"; - } - } - close $fd; - - # finish last commit (warning: repetition!) - if (%co) { - print "</td>\n" . - "<td class=\"link\">" . - $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})}, "commit") . - " | " . - $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'}, hash_base=>$co{'id'})}, "tree"); - print "</td>\n" . - "</tr>\n"; - } - - print "</table>\n"; - } - - if ($searchtype eq 'grep') { - git_print_page_nav('','', $hash,$co{'tree'},$hash); - git_print_header_div('commit', esc_html($co{'title'}), $hash); - - print "<table class=\"grep_search\">\n"; - my $alternate = 1; - my $matches = 0; - local $/ = "\n"; - open my $fd, "-|", git_cmd(), 'grep', '-n', - $search_use_regexp ? ('-E', '-i') : '-F', - $searchtext, $co{'tree'}; - my $lastfile = ''; - while (my $line = <$fd>) { - chomp $line; - my ($file, $lno, $ltext, $binary); - last if ($matches++ > 1000); - if ($line =~ /^Binary file (.+) matches$/) { - $file = $1; - $binary = 1; - } else { - (undef, $file, $lno, $ltext) = split(/:/, $line, 4); - } - if ($file ne $lastfile) { - $lastfile and print "</td></tr>\n"; - if ($alternate++) { - print "<tr class=\"dark\">\n"; - } else { - print "<tr class=\"light\">\n"; - } - print "<td class=\"list\">". - $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'}, - file_name=>"$file"), - -class => "list"}, esc_path($file)); - print "</td><td>\n"; - $lastfile = $file; - } - if ($binary) { - print "<div class=\"binary\">Binary file</div>\n"; - } else { - $ltext = untabify($ltext); - if ($ltext =~ m/^(.*)($search_regexp)(.*)$/i) { - $ltext = esc_html($1, -nbsp=>1); - $ltext .= '<span class="match">'; - $ltext .= esc_html($2, -nbsp=>1); - $ltext .= '</span>'; - $ltext .= esc_html($3, -nbsp=>1); - } else { - $ltext = esc_html($ltext, -nbsp=>1); - } - print "<div class=\"pre\">" . - $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'}, - file_name=>"$file").'#l'.$lno, - -class => "linenr"}, sprintf('%4i', $lno)) - . ' ' . $ltext . "</div>\n"; - } - } - if ($lastfile) { - print "</td></tr>\n"; - if ($matches > 1000) { - print "<div class=\"diff nodifferences\">Too many matches, listing trimmed</div>\n"; - } - } else { - print "<div class=\"diff nodifferences\">No matches found</div>\n"; - } - close $fd; - - print "</table>\n"; + if ($searchtype eq 'commit' || + $searchtype eq 'author' || + $searchtype eq 'committer') { + git_search_message(%co); + } elsif ($searchtype eq 'pickaxe') { + git_search_changes(%co); + } elsif ($searchtype eq 'grep') { + git_search_files(%co); + } else { + die_error(400, "Unknown search type"); } - git_footer_html(); } sub git_search_help { diff --git a/gitweb/static/js/blame_incremental.js b/gitweb/static/js/blame_incremental.js index 676da6b590..db6eb50584 100644 --- a/gitweb/static/js/blame_incremental.js +++ b/gitweb/static/js/blame_incremental.js @@ -29,7 +29,6 @@ /* ............................................................ */ /* utility/helper functions (and variables) */ -var xhr; // XMLHttpRequest object var projectUrl; // partial query + separator ('?' or ';') // 'commits' is an associative map. It maps SHA1s to Commit objects. @@ -420,8 +419,6 @@ function handleLine(commit, group) { // ---------------------------------------------------------------------- -var inProgress = false; // are we processing response - /**#@+ * @constant */ @@ -433,8 +430,6 @@ var endRe = /^END ?([^ ]*) ?(.*)/; var curCommit = new Commit(); var curGroup = {}; -var pollTimer = null; - /** * Parse output from 'git blame --incremental [...]', received via * XMLHttpRequest from server (blamedataUrl), and call handleLine @@ -535,43 +530,51 @@ function processData(unprocessed, nextReadPos) { * Handle XMLHttpRequest errors * * @param {XMLHttpRequest} xhr: XMLHttpRequest object + * @param {Number} [xhr.pollTimer] ID of the timeout to clear * - * @globals pollTimer, commits, inProgress + * @globals commits */ function handleError(xhr) { errorInfo('Server error: ' + xhr.status + ' - ' + (xhr.statusText || 'Error contacting server')); - clearInterval(pollTimer); + if (typeof xhr.pollTimer === "number") { + clearTimeout(xhr.pollTimer); + delete xhr.pollTimer; + } commits = {}; // free memory - - inProgress = false; } /** * Called after XMLHttpRequest finishes (loads) * - * @param {XMLHttpRequest} xhr: XMLHttpRequest object (unused) + * @param {XMLHttpRequest} xhr: XMLHttpRequest object + * @param {Number} [xhr.pollTimer] ID of the timeout to clear * - * @globals pollTimer, commits, inProgress + * @globals commits */ function responseLoaded(xhr) { - clearInterval(pollTimer); + if (typeof xhr.pollTimer === "number") { + clearTimeout(xhr.pollTimer); + delete xhr.pollTimer; + } fixColorsAndGroups(); writeTimeInterval(); commits = {}; // free memory - - inProgress = false; } /** * handler for XMLHttpRequest onreadystatechange event * @see startBlame * - * @globals xhr, inProgress + * @param {XMLHttpRequest} xhr: XMLHttpRequest object + * @param {Number} xhr.prevDataLength: previous value of xhr.responseText.length + * @param {Number} xhr.nextReadPos: start of unread part of xhr.responseText + * @param {Number} [xhr.pollTimer] ID of the timeout (to reset or cancel) + * @param {Boolean} fromTimer: if handler was called from timer */ -function handleResponse() { +function handleResponse(xhr, fromTimer) { /* * xhr.readyState @@ -609,32 +612,31 @@ function handleResponse() { return; } - // in case we were called before finished processing - if (inProgress) { - return; - } else { - inProgress = true; - } // extract new whole (complete) lines, and process them - while (xhr.prevDataLength !== xhr.responseText.length) { - if (xhr.readyState === 4 && - xhr.prevDataLength === xhr.responseText.length) { - break; - } - + if (xhr.prevDataLength !== xhr.responseText.length) { xhr.prevDataLength = xhr.responseText.length; var unprocessed = xhr.responseText.substring(xhr.nextReadPos); xhr.nextReadPos = processData(unprocessed, xhr.nextReadPos); - } // end while + } // did we finish work? - if (xhr.readyState === 4 && - xhr.prevDataLength === xhr.responseText.length) { + if (xhr.readyState === 4) { responseLoaded(xhr); + return; } - inProgress = false; + // if we get from timer, we have to restart it + // otherwise onreadystatechange gives us partial response, timer not needed + if (fromTimer) { + setTimeout(function () { + handleResponse(xhr, true); + }, 1000); + + } else if (typeof xhr.pollTimer === "number") { + clearTimeout(xhr.pollTimer); + delete xhr.pollTimer; + } } // ============================================================ @@ -649,11 +651,11 @@ function handleResponse() { * Called from 'blame_incremental' view after loading table with * file contents, a base for blame view. * - * @globals xhr, t0, projectUrl, div_progress_bar, totalLines, pollTimer + * @globals t0, projectUrl, div_progress_bar, totalLines */ function startBlame(blamedataUrl, bUrl) { - xhr = createRequestObject(); + var xhr = createRequestObject(); if (!xhr) { errorInfo('ERROR: XMLHttpRequest not supported'); return; @@ -672,8 +674,9 @@ function startBlame(blamedataUrl, bUrl) { xhr.prevDataLength = -1; // used to detect if we have new data xhr.nextReadPos = 0; // where unread part of response starts - xhr.onreadystatechange = handleResponse; - //xhr.onreadystatechange = function () { handleResponse(xhr); }; + xhr.onreadystatechange = function () { + handleResponse(xhr, false); + }; xhr.open('GET', blamedataUrl); xhr.setRequestHeader('Accept', 'text/plain'); @@ -681,7 +684,9 @@ function startBlame(blamedataUrl, bUrl) { // not all browsers call onreadystatechange event on each server flush // poll response using timer every second to handle this issue - pollTimer = setInterval(xhr.onreadystatechange, 1000); + xhr.pollTimer = setTimeout(function () { + handleResponse(xhr, true); + }, 1000); } /* end of blame_incremental.js */ diff --git a/gitweb/static/js/javascript-detection.js b/gitweb/static/js/javascript-detection.js index 93dd2bdd91..fa2596f77c 100644 --- a/gitweb/static/js/javascript-detection.js +++ b/gitweb/static/js/javascript-detection.js @@ -16,7 +16,7 @@ * and other reasons to not add 'js=1' param at the end of link * @constant */ -var jsExceptionsRe = /[;?]js=[01]$/; +var jsExceptionsRe = /[;?]js=[01](#.*)?$/; /** * Add '?js=1' or ';js=1' to the end of every link in the document @@ -33,9 +33,9 @@ function fixLinks() { var allLinks = document.getElementsByTagName("a") || document.links; for (var i = 0, len = allLinks.length; i < len; i++) { var link = allLinks[i]; - if (!jsExceptionsRe.test(link)) { // =~ /[;?]js=[01]$/; - link.href += - (link.href.indexOf('?') === -1 ? '?' : ';') + 'js=1'; + if (!jsExceptionsRe.test(link)) { + link.href = link.href.replace(/(#|$)/, + (link.href.indexOf('?') === -1 ? '?' : ';') + 'js=1$1'); } } } |