summaryrefslogtreecommitdiff
path: root/gitweb
diff options
context:
space:
mode:
Diffstat (limited to 'gitweb')
-rw-r--r--gitweb/INSTALL111
-rw-r--r--gitweb/Makefile8
-rw-r--r--gitweb/README434
-rwxr-xr-xgitweb/gitweb.perl1004
-rw-r--r--gitweb/static/gitweb.css30
-rw-r--r--gitweb/static/js/blame_incremental.js79
6 files changed, 776 insertions, 890 deletions
diff --git a/gitweb/INSTALL b/gitweb/INSTALL
index c5236fee9d..6d45406797 100644
--- a/gitweb/INSTALL
+++ b/gitweb/INSTALL
@@ -130,6 +130,8 @@ You can specify the following configuration variables when building GIT:
Points to an .html file which is included on the gitweb project
overview page ('projects_list' view), if it exists. Relative to
gitweb.cgi script. [Default: indextext.html]
+ * GITWEB_SITE_HTML_HEAD_STRING
+ html snippet to include in the <head> section of each page. [No default]
* GITWEB_SITE_HEADER
Filename of html text to include at top of each page. Relative to
gitweb.cgi script. [No default]
@@ -229,9 +231,9 @@ Gitweb config file
------------------
See also "Runtime gitweb configuration" section in README file
-for gitweb (in gitweb/README).
+for gitweb (in gitweb/README), and gitweb.conf(5) manpage.
-- You can configure gitweb further using the gitweb configuration file;
+- You can configure gitweb further using the per-instance gitweb configuration file;
by default this is a file named gitweb_config.perl in the same place as
gitweb.cgi script. You can control the default place for the config file
using the GITWEB_CONFIG build configuration variable, and you can set it
@@ -241,6 +243,17 @@ for gitweb (in gitweb/README).
GITWEB_CONFIG_SYSTEM build configuration variable, and override it
through the GITWEB_CONFIG_SYSTEM environment variable.
+ Note that if per-instance configuration file exists, then system-wide
+ configuration is _not used at all_. This is quite untypical and suprising
+ behavior. On the other hand changing current behavior would break backwards
+ compatibility and can lead to unexpected changes in gitweb behavior.
+ Therefore gitweb also looks for common system-wide configuration file,
+ normally /etc/gitweb-common.conf (set during build time using build time
+ configuration variable GITWEB_CONFIG_COMMON, set it at runtime using
+ environment variable with the same name). Settings from per-instance or
+ system-wide configuration file override those from common system-wide
+ configuration file.
+
- The gitweb config file is a fragment of perl code. You can set variables
using "our $variable = value"; text from "#" character until the end
of a line is ignored. See perlsyn(1) for details.
@@ -276,97 +289,19 @@ adding the following lines to your $GITWEB_CONFIG:
Gitweb repositories
-------------------
-- By default all git repositories under projectroot are visible and
- available to gitweb. The list of projects is generated by default by
- scanning the projectroot directory for git repositories (for object
- databases to be more exact).
-
- You can provide a pre-generated list of [visible] repositories,
- together with information about their owners (the project ownership
- defaults to the owner of the repository directory otherwise), by setting
- the GITWEB_LIST build configuration variable (or the $projects_list
- variable in the gitweb config file) to point to a plain file.
-
- Each line of the projects list file should consist of the url-encoded path
- to the project repository database (relative to projectroot), followed
- by the url-encoded project owner on the same line (separated by a space).
- Spaces in both project path and project owner have to be encoded as either
- '%20' or '+'.
-
- Other characters that have to be url-encoded, i.e. replaced by '%'
- followed by two-digit character number in octal, are: other whitespace
- characters (because they are field separator in a record), plus sign '+'
- (because it can be used as replacement for spaces), and percent sign '%'
- (which is used for encoding / escaping).
-
- You can generate the projects list index file using the project_index
- action (the 'TXT' link on projects list page) directly from gitweb.
-
-- By default, even if a project is not visible on projects list page, you
- can view it nevertheless by hand-crafting a gitweb URL. You can set the
- GITWEB_STRICT_EXPORT build configuration variable (or the $strict_export
- variable in the gitweb config file) to only allow viewing of
- repositories also shown on the overview page.
-
-- Alternatively, you can configure gitweb to only list and allow
- viewing of the explicitly exported repositories, via the
- GITWEB_EXPORT_OK build configuration variable (or the $export_ok
- variable in gitweb config file). If it evaluates to true, gitweb
- shows repositories only if this file exists in its object database
- (if directory has the magic file named $export_ok).
-
-- Finally, it is possible to specify an arbitrary perl subroutine that
- will be called for each project to determine if it can be exported.
- The subroutine receives an absolute path to the project as its only
- parameter.
-
- For example, if you use mod_perl to run the script, and have dumb
- http protocol authentication configured for your repositories, you
- can use the following hook to allow access only if the user is
- authorized to read the files:
-
- $export_auth_hook = sub {
- use Apache2::SubRequest ();
- use Apache2::Const -compile => qw(HTTP_OK);
- my $path = "$_[0]/HEAD";
- my $r = Apache2::RequestUtil->request;
- my $sub = $r->lookup_file($path);
- return $sub->filename eq $path
- && $sub->status == Apache2::Const::HTTP_OK;
- };
-
-
-Generating projects list using gitweb
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-We assume that GITWEB_CONFIG has its default Makefile value, namely
-gitweb_config.perl. Put the following in gitweb_make_index.perl file:
-
- $GITWEB_CONFIG = "gitweb_config.perl";
- do $GITWEB_CONFIG if -e $GITWEB_CONFIG;
-
- $projects_list = $projectroot;
-
-Then create the following script to get list of project in the format
-suitable for GITWEB_LIST build configuration variable (or
-$projects_list variable in gitweb config):
-
- #!/bin/sh
-
- export GITWEB_CONFIG="gitweb_make_index.perl"
- export GATEWAY_INTERFACE="CGI/1.1"
- export HTTP_ACCEPT="*/*"
- export REQUEST_METHOD="GET"
- export QUERY_STRING="a=project_index"
-
- perl -- /var/www/cgi-bin/gitweb.cgi
+By default gitweb shows all git repositories under single common repository
+root on a local filesystem; see description of GITWEB_PROJECTROOT build-time
+configuration variable above (and also of GITWEB_LIST).
+
+More advanced usage, like limiting access or visibility of repositories and
+managing multiple roots are described on gitweb manpage.
Example web server configuration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-See also "Webserver configuration" section in README file for gitweb
-(in gitweb/README).
+See also "Webserver configuration" and "Advanced web server setup" sections
+in gitweb(1) manpage.
- Apache2, gitweb installed as CGI script,
diff --git a/gitweb/Makefile b/gitweb/Makefile
index 5d20515fba..cd194d057f 100644
--- a/gitweb/Makefile
+++ b/gitweb/Makefile
@@ -20,6 +20,7 @@ INSTALL ?= install
# default configuration for gitweb
GITWEB_CONFIG = gitweb_config.perl
GITWEB_CONFIG_SYSTEM = /etc/gitweb.conf
+GITWEB_CONFIG_COMMON = /etc/gitweb-common.conf
GITWEB_HOME_LINK_STR = projects
GITWEB_SITENAME =
GITWEB_PROJECTROOT = /pub/git
@@ -33,6 +34,7 @@ GITWEB_CSS = static/gitweb.css
GITWEB_LOGO = static/git-logo.png
GITWEB_FAVICON = static/git-favicon.png
GITWEB_JS = static/gitweb.js
+GITWEB_SITE_HTML_HEAD_STRING =
GITWEB_SITE_HEADER =
GITWEB_SITE_FOOTER =
HIGHLIGHT_BIN = highlight
@@ -129,6 +131,7 @@ GITWEB_REPLACE = \
-e 's|++GIT_BINDIR++|$(bindir)|g' \
-e 's|++GITWEB_CONFIG++|$(GITWEB_CONFIG)|g' \
-e 's|++GITWEB_CONFIG_SYSTEM++|$(GITWEB_CONFIG_SYSTEM)|g' \
+ -e 's|++GITWEB_CONFIG_COMMON++|$(GITWEB_CONFIG_COMMON)|g' \
-e 's|++GITWEB_HOME_LINK_STR++|$(GITWEB_HOME_LINK_STR)|g' \
-e 's|++GITWEB_SITENAME++|$(GITWEB_SITENAME)|g' \
-e 's|++GITWEB_PROJECTROOT++|$(GITWEB_PROJECTROOT)|g' \
@@ -142,6 +145,7 @@ GITWEB_REPLACE = \
-e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \
-e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \
-e 's|++GITWEB_JS++|$(GITWEB_JS)|g' \
+ -e 's|++GITWEB_SITE_HTML_HEAD_STRING++|$(GITWEB_SITE_HTML_HEAD_STRING)|g' \
-e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \
-e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g' \
-e 's|++HIGHLIGHT_BIN++|$(HIGHLIGHT_BIN)|g'
@@ -183,7 +187,9 @@ install: all
### Cleaning rules
clean:
- $(RM) gitweb.cgi static/gitweb.min.js static/gitweb.min.css GITWEB-BUILD-OPTIONS
+ $(RM) gitweb.cgi static/gitweb.js \
+ static/gitweb.min.js static/gitweb.min.css \
+ GITWEB-BUILD-OPTIONS
.PHONY: all clean install test test-installed .FORCE-GIT-VERSION-FILE FORCE
diff --git a/gitweb/README b/gitweb/README
index a4cfcb42cd..6da4778b73 100644
--- a/gitweb/README
+++ b/gitweb/README
@@ -7,413 +7,65 @@ The one working on:
From the git version 1.4.0 gitweb is bundled with git.
-Runtime gitweb configuration
-----------------------------
-
-You can adjust gitweb behaviour using the file specified in `GITWEB_CONFIG`
-(defaults to 'gitweb_config.perl' in the same directory as the CGI), and
-as a fallback `GITWEB_CONFIG_SYSTEM` (defaults to /etc/gitweb.conf).
-The most notable thing that is not configurable at compile time are the
-optional features, stored in the '%features' variable.
-
-Ultimate description on how to reconfigure the default features setting
-in your `GITWEB_CONFIG` or per-project in `project.git/config` can be found
-as comments inside 'gitweb.cgi'.
-
-See also the "Gitweb config file" (with an example of config file), and
-the "Gitweb repositories" sections in INSTALL file for gitweb.
-
-
-The gitweb config file is a fragment of perl code. You can set variables
-using "our $variable = value"; text from "#" character until the end
-of a line is ignored. See perlsyn(1) man page for details.
-
-Below is the list of variables which you might want to set in gitweb config.
-See the top of 'gitweb.cgi' for the full list of variables and their
-descriptions.
-
-Gitweb config file variables
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-You can set, among others, the following variables in gitweb config files
-(with the exception of $projectroot and $projects_list this list does
-not include variables usually directly set during build):
- * $GIT
- Core git executable to use. By default set to "$GIT_BINDIR/git", which
- in turn is by default set to "$(bindir)/git". If you use git from binary
- package, set this to "/usr/bin/git". This can just be "git" if your
- webserver has a sensible PATH. If you have multiple git versions
- installed it can be used to choose which one to use.
- * $version
- Gitweb version, set automatically when creating gitweb.cgi from
- gitweb.perl. You might want to modify it if you are running modified
- gitweb.
- * $projectroot
- Absolute filesystem path which will be prepended to project path;
- the path to repository is $projectroot/$project. Set to
- $GITWEB_PROJECTROOT during installation. This variable have to be
- set correctly for gitweb to find repositories.
- * $projects_list
- Source of projects list, either directory to scan, or text file
- with list of repositories (in the "<URI-encoded repository path> SP
- <URI-encoded repository owner>" line format; actually there can be
- any sequence of whitespace in place of space (SP)). Set to
- $GITWEB_LIST during installation. If empty, $projectroot is used
- to scan for repositories.
- * $my_url, $my_uri
- Full URL and absolute URL of gitweb script;
- in earlier versions of gitweb you might have need to set those
- variables, now there should be no need to do it. See
- $per_request_config if you need to set them still.
- * $base_url
- Base URL for relative URLs in pages generated by gitweb,
- (e.g. $logo, $favicon, @stylesheets if they are relative URLs),
- needed and used only for URLs with nonempty PATH_INFO via
- <base href="$base_url">. Usually gitweb sets its value correctly,
- and there is no need to set this variable, e.g. to $my_uri or "/".
- See $per_request_config if you need to set it anyway.
- * $home_link
- Target of the home link on top of all pages (the first part of view
- "breadcrumbs"). By default set to absolute URI of a page ($my_uri).
- * @stylesheets
- List of URIs of stylesheets (relative to base URI of a page). You
- might specify more than one stylesheet, for example use gitweb.css
- as base, with site specific modifications in separate stylesheet
- to make it easier to upgrade gitweb. You can add 'site' stylesheet
- for example by using
- push @stylesheets, "gitweb-site.css";
- in the gitweb config file.
- * $logo_url, $logo_label
- URI and label (title) of GIT logo link (or your site logo, if you choose
- to use different logo image). By default they point to git homepage;
- in the past they pointed to git documentation at www.kernel.org.
- * $projects_list_description_width
- The width (in characters) of the projects list "Description" column.
- Longer descriptions will be cut (trying to cut at word boundary);
- full description is available as 'title' attribute (usually shown on
- mouseover). By default set to 25, which might be too small if you
- use long project descriptions.
- * $projects_list_group_categories
- Enables the grouping of projects by category on the project list page.
- The category of a project is determined by the $GIT_DIR/category
- file or the 'gitweb.category' variable in its repository configuration.
- Disabled by default.
- * $project_list_default_category
- Default category for projects for which none is specified. If set
- to the empty string, such projects will remain uncategorized and
- listed at the top, above categorized projects.
- * @git_base_url_list
- List of git base URLs used for URL to where fetch project from, shown
- in project summary page. Full URL is "$git_base_url/$project".
- You can setup multiple base URLs (for example one for git:// protocol
- access, and one for http:// "dumb" protocol access). Note that per
- repository configuration in 'cloneurl' file, or as values of gitweb.url
- project config.
- * $default_blob_plain_mimetype
- Default mimetype for blob_plain (raw) view, if mimetype checking
- doesn't result in some other type; by default 'text/plain'.
- * $default_text_plain_charset
- Default charset for text files. If not set, web server configuration
- would be used.
- * $mimetypes_file
- File to use for (filename extension based) guessing of MIME types before
- trying /etc/mime.types. Path, if relative, is taken currently as
- relative to the current git repository.
- * $fallback_encoding
- Gitweb assumes this charset if line contains non-UTF-8 characters.
- Fallback decoding is used without error checking, so it can be even
- 'utf-8'. Value must be valid encoding; see Encoding::Supported(3pm) man
- page for a list. By default 'latin1', aka. 'iso-8859-1'.
- * @diff_opts
- Rename detection options for git-diff and git-diff-tree. By default
- ('-M'); set it to ('-C') or ('-C', '-C') to also detect copies, or
- set it to () if you don't want to have renames detection.
- * $prevent_xss
- If true, some gitweb features are disabled to prevent content in
- repositories from launching cross-site scripting (XSS) attacks. Set this
- to true if you don't trust the content of your repositories. The default
- is false.
- * $maxload
- Used to set the maximum load that we will still respond to gitweb queries.
- If server load exceed this value then return "503 Service Unavailable" error.
- Server load is taken to be 0 if gitweb cannot determine its value. Set it to
- undefined value to turn it off. The default is 300.
- * $highlight_bin
- Path to the highlight executable to use (must be the one from
- http://www.andre-simon.de due to assumptions about parameters and output).
- Useful if highlight is not installed on your webserver's PATH.
- [Default: highlight]
- * $per_request_config
- If set to code reference, it would be run once per each request. You can
- set parts of configuration that change per session, e.g. by setting it to
- sub { $ENV{GL_USER} = $cgi->remote_user || "gitweb"; }
- Otherwise it is treated as boolean value: if true gitweb would process
- config file once per request, if false it would process config file only
- once. Note: $my_url, $my_uri, and $base_url are overwritten with
- their default values before every request, so if you want to change
- them, be sure to set this variable to true or a code reference effecting
- the desired changes. The default is true.
-
-Projects list file format
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Instead of having gitweb find repositories by scanning filesystem starting
-from $projectroot (or $projects_list, if it points to directory), you can
-provide list of projects by setting $projects_list to a text file with list
-of projects (and some additional info). This file uses the following
-format:
-
-One record (for project / repository) per line, whitespace separated fields;
-does not support (at least for now) lines continuation (newline escaping).
-Leading and trailing whitespace are ignored, any run of whitespace can be
-used as field separator (rules for Perl's "split(' ', $line)"). Keyed by
-the first field, which is project name, i.e. path to repository GIT_DIR
-relative to $projectroot. Fields use modified URI encoding, defined in
-RFC 3986, section 2.1 (Percent-Encoding), or rather "Query string encoding"
-(see http://en.wikipedia.org/wiki/Query_string#URL_encoding), the difference
-being that SP (' ') can be encoded as '+' (and therefore '+' has to be also
-percent-encoded). Reserved characters are: '%' (used for encoding), '+'
-(can be used to encode SPACE), all whitespace characters as defined in Perl,
-including SP, TAB and LF, (used to separate fields in a record).
-
-Currently list of fields is
- * <repository path> - path to repository GIT_DIR, relative to $projectroot
- * <repository owner> - displayed as repository owner, preferably full name,
- or email, or both
-
-You can additionally use $projects_list file to limit which repositories
-are visible, and together with $strict_export to limit access to
-repositories (see "Gitweb repositories" section in gitweb/INSTALL).
-
-
-Per-repository gitweb configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-You can also configure individual repositories shown in gitweb by creating
-file in the GIT_DIR of git repository, or by setting some repo configuration
-variable (in GIT_DIR/config).
-
-You can use the following files in repository:
- * README.html
- A .html file (HTML fragment) which is included on the gitweb project
- summary page inside <div> block element. You can use it for longer
- description of a project, to provide links (for example to project's
- homepage), etc. This is recognized only if XSS prevention is off
- ($prevent_xss is false); a way to include a readme safely when XSS
- prevention is on may be worked out in the future.
- * description (or gitweb.description)
- Short (shortened by default to 25 characters in the projects list page)
- single line description of a project (of a repository). Plain text file;
- HTML will be escaped. By default set to
- Unnamed repository; edit this file to name it for gitweb.
- from the template during repository creation. You can use the
- gitweb.description repo configuration variable, but the file takes
- precedence.
- * category (or gitweb.category)
- Singe line category of a project, used to group projects if
- $projects_list_group_categories is enabled. By default (file and
- configuration variable absent), uncategorized projects are put in
- the $project_list_default_category category. You can use the
- gitweb.category repo configuration variable, but the file takes
- precedence.
- * cloneurl (or multiple-valued gitweb.url)
- File with repository URL (used for clone and fetch), one per line.
- Displayed in the project summary page. You can use multiple-valued
- gitweb.url repository configuration variable for that, but the file
- takes precedence.
- * gitweb.owner
- You can use the gitweb.owner repository configuration variable to set
- repository's owner. It is displayed in the project list and summary
- page. If it's not set, filesystem directory's owner is used
- (via GECOS field / real name field from getpwiud(3)).
- * various gitweb.* config variables (in config)
- Read description of %feature hash for detailed list, and some
- descriptions.
-
-
-Webserver configuration
------------------------
-
-If you want to have one URL for both gitweb and your http://
-repositories, you can configure apache like this:
-
-<VirtualHost *:80>
- ServerName git.example.org
- DocumentRoot /pub/git
- SetEnv GITWEB_CONFIG /etc/gitweb.conf
-
- # turning on mod rewrite
- RewriteEngine on
-
- # make the front page an internal rewrite to the gitweb script
- RewriteRule ^/$ /cgi-bin/gitweb.cgi
-
- # make access for "dumb clients" work
- RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT]
-</VirtualHost>
-
-The above configuration expects your public repositories to live under
-/pub/git and will serve them as http://git.domain.org/dir-under-pub-git,
-both as cloneable GIT URL and as browseable gitweb interface.
-If you then start your git-daemon with --base-path=/pub/git --export-all
-then you can even use the git:// URL with exactly the same path.
-
-Setting the environment variable GITWEB_CONFIG will tell gitweb to use
-the named file (i.e. in this example /etc/gitweb.conf) as a
-configuration for gitweb. Perl variables defined in here will
-override the defaults given at the head of the gitweb.perl (or
-gitweb.cgi). Look at the comments in that file for information on
-which variables and what they mean.
-
-If you use the rewrite rules from the example you'll likely also need
-something like the following in your gitweb.conf (or gitweb_config.perl) file:
-
- @stylesheets = ("/some/absolute/path/gitweb.css");
- $my_uri = "/";
- $home_link = "/";
-
-
-Webserver configuration with multiple projects' root
-----------------------------------------------------
+Build time gitweb configuration
+-------------------------------
+There are many configuration variables which affect building gitweb (among
+others creating gitweb.cgi out of gitweb.perl by replacing placeholders such
+as `++GIT_BINDIR++` by their build-time values).
-If you want to use gitweb with several project roots you can edit your apache
-virtual host and gitweb.conf configuration files like this :
+Building and installing gitweb is described in gitweb's INSTALL file
+(in 'gitweb/INSTALL').
-virtual host configuration :
-<VirtualHost *:80>
- ServerName git.example.org
- DocumentRoot /pub/git
- SetEnv GITWEB_CONFIG /etc/gitweb.conf
-
- # turning on mod rewrite
- RewriteEngine on
-
- # make the front page an internal rewrite to the gitweb script
- RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT]
-
- # look for a public_git folder in unix users' home
- # http://git.example.org/~<user>/
- RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT]
-
- # http://git.example.org/+<user>/
- #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT]
-
- # http://git.example.org/user/<user>/
- #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT]
-
- # defined list of project roots
- RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT]
- RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT]
-
- # make access for "dumb clients" work
- RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT]
-</VirtualHost>
-
-gitweb.conf configuration :
-
-$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git";
-
-These configurations enable two things. First, each unix user (<user>) of the
-server will be able to browse through gitweb git repositories found in
-~/public_git/ with the following url : http://git.example.org/~<user>/
-
-If you do not want this feature on your server just remove the second rewrite rule.
-
-If you already use mod_userdir in your virtual host or you don't want to use
-the '~' as first character just comment or remove the second rewrite rule and
-uncomment one of the following according to what you want.
-
-Second, repositories found in /pub/scm/ and /var/git/ will be accesible
-through http://git.example.org/scm/ and http://git.example.org/var/.
-You can add as many project roots as you want by adding rewrite rules like the
-third and the fourth.
-
-
-PATH_INFO usage
------------------------
-If you enable PATH_INFO usage in gitweb by putting
-
- $feature{'pathinfo'}{'default'} = [1];
-
-in your gitweb.conf, it is possible to set up your server so that it
-consumes and produces URLs in the form
-
-http://git.example.com/project.git/shortlog/sometag
-
-by using a configuration such as the following, that assumes that
-/var/www/gitweb is the DocumentRoot of your webserver, and that it
-contains the gitweb.cgi script and complementary static files
-(stylesheet, favicon):
-
-<VirtualHost *:80>
- ServerAlias git.example.com
-
- DocumentRoot /var/www/gitweb
-
- <Directory /var/www/gitweb>
- Options ExecCGI
- AddHandler cgi-script cgi
-
- DirectoryIndex gitweb.cgi
-
- RewriteEngine On
- RewriteCond %{REQUEST_FILENAME} !-f
- RewriteCond %{REQUEST_FILENAME} !-d
- RewriteRule ^.* /gitweb.cgi/$0 [L,PT]
- </Directory>
-</VirtualHost>
-
-The rewrite rule guarantees that existing static files will be properly
-served, whereas any other URL will be passed to gitweb as PATH_INFO
-parameter.
-
-Notice that in this case you don't need special settings for
-@stylesheets, $my_uri and $home_link, but you lose "dumb client" access
-to your project .git dirs. A possible workaround for the latter is the
-following: in your project root dir (e.g. /pub/git) have the projects
-named without a .git extension (e.g. /pub/git/project instead of
-/pub/git/project.git) and configure Apache as follows:
-
-<VirtualHost *:80>
- ServerAlias git.example.com
-
- DocumentRoot /var/www/gitweb
-
- AliasMatch ^(/.*?)(\.git)(/.*)?$ /pub/git$1$3
- <Directory /var/www/gitweb>
- Options ExecCGI
- AddHandler cgi-script cgi
+Runtime gitweb configuration
+----------------------------
+Gitweb obtains configuration data from the following sources in the
+following order:
- DirectoryIndex gitweb.cgi
+1. built-in values (some set during build stage),
+2. common system-wide configuration file (`GITWEB_CONFIG_COMMON`,
+ defaults to '/etc/gitweb-common.conf'),
+3. either per-instance configuration file (`GITWEB_CONFIG`, defaults to
+ 'gitweb_config.perl' in the same directory as the installed gitweb),
+ or if it does not exists then system-wide configuration file
+ (`GITWEB_CONFIG_SYSTEM`, defaults to '/etc/gitweb.conf').
- RewriteEngine On
- RewriteCond %{REQUEST_FILENAME} !-f
- RewriteCond %{REQUEST_FILENAME} !-d
- RewriteRule ^.* /gitweb.cgi/$0 [L,PT]
- </Directory>
-</VirtualHost>
+Values obtained in later configuration files override values obtained earlier
+in above sequence.
-The additional AliasMatch makes it so that
+You can read defaults in system-wide GITWEB_CONFIG_SYSTEM from GITWEB_CONFIG
+by adding
-http://git.example.com/project.git
+ read_config_file($GITWEB_CONFIG_SYSTEM);
-will give raw access to the project's git dir (so that the project can
-be cloned), while
+at very beginning of per-instance GITWEB_CONFIG file. In this case
+settings in said per-instance file will override settings from
+system-wide configuration file. Note that read_config_file checks
+itself that the $GITWEB_CONFIG_SYSTEM file exists.
-http://git.example.com/project
+The most notable thing that is not configurable at compile time are the
+optional features, stored in the '%features' variable.
-will provide human-friendly gitweb access.
+Ultimate description on how to reconfigure the default features setting
+in your `GITWEB_CONFIG` or per-project in `project.git/config` can be found
+as comments inside 'gitweb.cgi'.
-This solution is not 100% bulletproof, in the sense that if some project
-has a named ref (branch, tag) starting with 'git/', then paths such as
+See also gitweb.conf(5) manpage.
-http://git.example.com/project/command/abranch..git/abranch
-will fail with a 404 error.
+Web server configuration
+------------------------
+Gitweb can be run as CGI script, as legacy mod_perl application (using
+ModPerl::Registry), and as FastCGI script. You can find some simple examples
+in "Example web server configuration" section in INSTALL file for gitweb (in
+gitweb/INSTALL).
+See "Webserver configuration" and "Advanced web server setup" sections in
+gitweb(1) manpage.
+AUTHORS
+-------
Originally written by:
Kay Sievers <kay.sievers@vrfy.org>
diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl
index 50a835a5bf..f80f2594cb 100755
--- a/gitweb/gitweb.perl
+++ b/gitweb/gitweb.perl
@@ -85,6 +85,8 @@ our $home_link_str = "++GITWEB_HOME_LINK_STR++";
our $site_name = "++GITWEB_SITENAME++"
|| ($ENV{'SERVER_NAME'} || "Untitled") . " Git";
+# html snippet to include in the <head> section of each page
+our $site_html_head_string = "++GITWEB_SITE_HTML_HEAD_STRING++";
# filename of html text to include at top of each page
our $site_header = "++GITWEB_SITE_HEADER++";
# html text to include at home page
@@ -321,6 +323,10 @@ our %feature = (
# Enable text search, which will list the commits which match author,
# committer or commit text to a given string. Enabled by default.
# Project specific override is not supported.
+ #
+ # Note that this controls all search features, which means that if
+ # it is disabled, then 'grep' and 'pickaxe' search would also be
+ # disabled.
'search' => {
'override' => 0,
'default' => [1]},
@@ -661,13 +667,25 @@ sub read_config_file {
return;
}
-our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM);
+our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM, $GITWEB_CONFIG_COMMON);
sub evaluate_gitweb_config {
our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++";
our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++";
+ our $GITWEB_CONFIG_COMMON = $ENV{'GITWEB_CONFIG_COMMON'} || "++GITWEB_CONFIG_COMMON++";
+
+ # Protect agains duplications of file names, to not read config twice.
+ # Only one of $GITWEB_CONFIG and $GITWEB_CONFIG_SYSTEM is used, so
+ # there possibility of duplication of filename there doesn't matter.
+ $GITWEB_CONFIG = "" if ($GITWEB_CONFIG eq $GITWEB_CONFIG_COMMON);
+ $GITWEB_CONFIG_SYSTEM = "" if ($GITWEB_CONFIG_SYSTEM eq $GITWEB_CONFIG_COMMON);
+
+ # Common system-wide settings for convenience.
+ # Those settings can be ovverriden by GITWEB_CONFIG or GITWEB_CONFIG_SYSTEM.
+ read_config_file($GITWEB_CONFIG_COMMON);
- # use first config file that exists
- read_config_file($GITWEB_CONFIG) or
+ # Use first config file that exists. This means use the per-instance
+ # GITWEB_CONFIG if exists, otherwise use GITWEB_SYSTEM_CONFIG.
+ read_config_file($GITWEB_CONFIG) and return;
read_config_file($GITWEB_CONFIG_SYSTEM);
}
@@ -741,6 +759,7 @@ our @cgi_param_mapping = (
extra_options => "opt",
search_use_regexp => "sr",
ctag => "by_tag",
+ diff_style => "ds",
# this must be last entry (for manipulation from JavaScript)
javascript => "js"
);
@@ -1501,6 +1520,17 @@ sub esc_path {
return $str;
}
+# Sanitize for use in XHTML + application/xml+xhtm (valid XML 1.0)
+sub sanitize {
+ my $str = shift;
+
+ return undef unless defined $str;
+
+ $str = to_utf8($str);
+ $str =~ s|([[:cntrl:]])|($1 =~ /[\t\n\r]/ ? $1 : quot_cec($1))|eg;
+ return $str;
+}
+
# Make control characters "printable", using character escape codes (CEC)
sub quot_cec {
my $cntrl = shift;
@@ -2196,93 +2226,119 @@ sub format_diff_cc_simplified {
return $result;
}
-# format patch (diff) line (not to be used for diff headers)
-sub format_diff_line {
- my $line = shift;
- my ($from, $to) = @_;
- my $diff_class = "";
-
- chomp $line;
+sub diff_line_class {
+ my ($line, $from, $to) = @_;
+ # ordinary diff
+ my $num_sign = 1;
+ # combined diff
if ($from && $to && ref($from->{'href'}) eq "ARRAY") {
- # combined diff
- my $prefix = substr($line, 0, scalar @{$from->{'href'}});
- if ($line =~ m/^\@{3}/) {
- $diff_class = " chunk_header";
- } elsif ($line =~ m/^\\/) {
- $diff_class = " incomplete";
- } elsif ($prefix =~ tr/+/+/) {
- $diff_class = " add";
- } elsif ($prefix =~ tr/-/-/) {
- $diff_class = " rem";
- }
- } else {
- # assume ordinary diff
- my $char = substr($line, 0, 1);
- if ($char eq '+') {
- $diff_class = " add";
- } elsif ($char eq '-') {
- $diff_class = " rem";
- } elsif ($char eq '@') {
- $diff_class = " chunk_header";
- } elsif ($char eq "\\") {
- $diff_class = " incomplete";
- }
+ $num_sign = scalar @{$from->{'href'}};
+ }
+
+ my @diff_line_classifier = (
+ { regexp => qr/^\@\@{$num_sign} /, class => "chunk_header"},
+ { regexp => qr/^\\/, class => "incomplete" },
+ { regexp => qr/^ {$num_sign}/, class => "ctx" },
+ # classifier for context must come before classifier add/rem,
+ # or we would have to use more complicated regexp, for example
+ # qr/(?= {0,$m}\+)[+ ]{$num_sign}/, where $m = $num_sign - 1;
+ { regexp => qr/^[+ ]{$num_sign}/, class => "add" },
+ { regexp => qr/^[- ]{$num_sign}/, class => "rem" },
+ );
+ for my $clsfy (@diff_line_classifier) {
+ return $clsfy->{'class'}
+ if ($line =~ $clsfy->{'regexp'});
}
- $line = untabify($line);
- if ($from && $to && $line =~ m/^\@{2} /) {
- my ($from_text, $from_start, $from_lines, $to_text, $to_start, $to_lines, $section) =
- $line =~ m/^\@{2} (-(\d+)(?:,(\d+))?) (\+(\d+)(?:,(\d+))?) \@{2}(.*)$/;
- $from_lines = 0 unless defined $from_lines;
- $to_lines = 0 unless defined $to_lines;
+ # fallback
+ return "";
+}
- if ($from->{'href'}) {
- $from_text = $cgi->a({-href=>"$from->{'href'}#l$from_start",
- -class=>"list"}, $from_text);
- }
- if ($to->{'href'}) {
- $to_text = $cgi->a({-href=>"$to->{'href'}#l$to_start",
- -class=>"list"}, $to_text);
- }
- $line = "<span class=\"chunk_info\">@@ $from_text $to_text @@</span>" .
- "<span class=\"section\">" . esc_html($section, -nbsp=>1) . "</span>";
- return "<div class=\"diff$diff_class\">$line</div>\n";
- } elsif ($from && $to && $line =~ m/^\@{3}/) {
- my ($prefix, $ranges, $section) = $line =~ m/^(\@+) (.*?) \@+(.*)$/;
- my (@from_text, @from_start, @from_nlines, $to_text, $to_start, $to_nlines);
+# assumes that $from and $to are defined and correctly filled,
+# and that $line holds a line of chunk header for unified diff
+sub format_unidiff_chunk_header {
+ my ($line, $from, $to) = @_;
- @from_text = split(' ', $ranges);
- for (my $i = 0; $i < @from_text; ++$i) {
- ($from_start[$i], $from_nlines[$i]) =
- (split(',', substr($from_text[$i], 1)), 0);
- }
+ my ($from_text, $from_start, $from_lines, $to_text, $to_start, $to_lines, $section) =
+ $line =~ m/^\@{2} (-(\d+)(?:,(\d+))?) (\+(\d+)(?:,(\d+))?) \@{2}(.*)$/;
- $to_text = pop @from_text;
- $to_start = pop @from_start;
- $to_nlines = pop @from_nlines;
+ $from_lines = 0 unless defined $from_lines;
+ $to_lines = 0 unless defined $to_lines;
- $line = "<span class=\"chunk_info\">$prefix ";
- for (my $i = 0; $i < @from_text; ++$i) {
- if ($from->{'href'}[$i]) {
- $line .= $cgi->a({-href=>"$from->{'href'}[$i]#l$from_start[$i]",
- -class=>"list"}, $from_text[$i]);
- } else {
- $line .= $from_text[$i];
- }
- $line .= " ";
- }
- if ($to->{'href'}) {
- $line .= $cgi->a({-href=>"$to->{'href'}#l$to_start",
- -class=>"list"}, $to_text);
+ if ($from->{'href'}) {
+ $from_text = $cgi->a({-href=>"$from->{'href'}#l$from_start",
+ -class=>"list"}, $from_text);
+ }
+ if ($to->{'href'}) {
+ $to_text = $cgi->a({-href=>"$to->{'href'}#l$to_start",
+ -class=>"list"}, $to_text);
+ }
+ $line = "<span class=\"chunk_info\">@@ $from_text $to_text @@</span>" .
+ "<span class=\"section\">" . esc_html($section, -nbsp=>1) . "</span>";
+ return $line;
+}
+
+# assumes that $from and $to are defined and correctly filled,
+# and that $line holds a line of chunk header for combined diff
+sub format_cc_diff_chunk_header {
+ my ($line, $from, $to) = @_;
+
+ my ($prefix, $ranges, $section) = $line =~ m/^(\@+) (.*?) \@+(.*)$/;
+ my (@from_text, @from_start, @from_nlines, $to_text, $to_start, $to_nlines);
+
+ @from_text = split(' ', $ranges);
+ for (my $i = 0; $i < @from_text; ++$i) {
+ ($from_start[$i], $from_nlines[$i]) =
+ (split(',', substr($from_text[$i], 1)), 0);
+ }
+
+ $to_text = pop @from_text;
+ $to_start = pop @from_start;
+ $to_nlines = pop @from_nlines;
+
+ $line = "<span class=\"chunk_info\">$prefix ";
+ for (my $i = 0; $i < @from_text; ++$i) {
+ if ($from->{'href'}[$i]) {
+ $line .= $cgi->a({-href=>"$from->{'href'}[$i]#l$from_start[$i]",
+ -class=>"list"}, $from_text[$i]);
} else {
- $line .= $to_text;
+ $line .= $from_text[$i];
}
- $line .= " $prefix</span>" .
- "<span class=\"section\">" . esc_html($section, -nbsp=>1) . "</span>";
- return "<div class=\"diff$diff_class\">$line</div>\n";
+ $line .= " ";
}
- return "<div class=\"diff$diff_class\">" . esc_html($line, -nbsp=>1) . "</div>\n";
+ if ($to->{'href'}) {
+ $line .= $cgi->a({-href=>"$to->{'href'}#l$to_start",
+ -class=>"list"}, $to_text);
+ } else {
+ $line .= $to_text;
+ }
+ $line .= " $prefix</span>" .
+ "<span class=\"section\">" . esc_html($section, -nbsp=>1) . "</span>";
+ return $line;
+}
+
+# process patch (diff) line (not to be used for diff headers),
+# returning class and HTML-formatted (but not wrapped) line
+sub process_diff_line {
+ my $line = shift;
+ my ($from, $to) = @_;
+
+ my $diff_class = diff_line_class($line, $from, $to);
+
+ chomp $line;
+ $line = untabify($line);
+
+ if ($from && $to && $line =~ m/^\@{2} /) {
+ $line = format_unidiff_chunk_header($line, $from, $to);
+ return $diff_class, $line;
+
+ } elsif ($from && $to && $line =~ m/^\@{3}/) {
+ $line = format_cc_diff_chunk_header($line, $from, $to);
+ return $diff_class, $line;
+
+ }
+ return $diff_class, esc_html($line, -nbsp=>1);
}
# Generates undef or something like "_snapshot_" or "snapshot (_tbz2_ _zip_)",
@@ -2510,6 +2566,13 @@ sub git_get_project_config {
# key sanity check
return unless ($key);
+ # only subsection, if exists, is case sensitive,
+ # and not lowercased by 'git config -z -l'
+ if (my ($hi, $mi, $lo) = ($key =~ /^([^.]*)\.(.*)\.([^.]*)$/)) {
+ $key = join(".", lc($hi), $mi, lc($lo));
+ } else {
+ $key = lc($key);
+ }
$key =~ s/^gitweb\.//;
return if ($key =~ m/\W/);
@@ -2852,7 +2915,7 @@ sub filter_forks_from_projects_list {
$path =~ s/\.git$//; # forks of 'repo.git' are in 'repo/' directory
next if ($path =~ m!/$!); # skip non-bare repositories, e.g. 'repo/.git'
next unless ($path); # skip '.git' repository: tests, git-instaweb
- next unless (-d $path); # containing directory exists
+ next unless (-d "$projectroot/$path"); # containing directory exists
$pr->{'forks'} = []; # there can be 0 or more forks of project
# add to trie
@@ -3562,12 +3625,9 @@ sub mimetype_guess_file {
open(my $mh, '<', $mimemap) or return undef;
while (<$mh>) {
next if m/^#/; # skip comments
- my ($mimetype, $exts) = split(/\t+/);
- if (defined $exts) {
- my @exts = split(/\s+/, $exts);
- foreach my $ext (@exts) {
- $mimemap{$ext} = $mimetype;
- }
+ my ($mimetype, @exts) = split(/\s+/);
+ foreach my $ext (@exts) {
+ $mimemap{$ext} = $mimetype;
}
}
close($mh);
@@ -3683,6 +3743,20 @@ sub get_page_title {
return $title;
}
+sub get_content_type_html {
+ # require explicit support from the UA if we are to send the page as
+ # 'application/xhtml+xml', otherwise send it as plain old 'text/html'.
+ # we have to do this because MSIE sometimes globs '*/*', pretending to
+ # support xhtml+xml but choking when it gets what it asked for.
+ if (defined $cgi->http('HTTP_ACCEPT') &&
+ $cgi->http('HTTP_ACCEPT') =~ m/(,|;|\s|^)application\/xhtml\+xml(,|;|\s|$)/ &&
+ $cgi->Accept('application/xhtml+xml') != 0) {
+ return 'application/xhtml+xml';
+ } else {
+ return 'text/html';
+ }
+}
+
sub print_feed_meta {
if (defined $project) {
my %href_params = get_feed_info();
@@ -3728,24 +3802,90 @@ sub print_feed_meta {
}
}
+sub print_header_links {
+ my $status = shift;
+
+ # print out each stylesheet that exist, providing backwards capability
+ # for those people who defined $stylesheet in a config file
+ if (defined $stylesheet) {
+ print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n";
+ } else {
+ foreach my $stylesheet (@stylesheets) {
+ next unless $stylesheet;
+ print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n";
+ }
+ }
+ print_feed_meta()
+ if ($status eq '200 OK');
+ if (defined $favicon) {
+ print qq(<link rel="shortcut icon" href=").esc_url($favicon).qq(" type="image/png" />\n);
+ }
+}
+
+sub print_nav_breadcrumbs {
+ my %opts = @_;
+
+ print $cgi->a({-href => esc_url($home_link)}, $home_link_str) . " / ";
+ if (defined $project) {
+ print $cgi->a({-href => href(action=>"summary")}, esc_html($project));
+ if (defined $action) {
+ my $action_print = $action ;
+ if (defined $opts{-action_extra}) {
+ $action_print = $cgi->a({-href => href(action=>$action)},
+ $action);
+ }
+ print " / $action_print";
+ }
+ if (defined $opts{-action_extra}) {
+ print " / $opts{-action_extra}";
+ }
+ print "\n";
+ }
+}
+
+sub print_search_form {
+ if (!defined $searchtext) {
+ $searchtext = "";
+ }
+ my $search_hash;
+ if (defined $hash_base) {
+ $search_hash = $hash_base;
+ } elsif (defined $hash) {
+ $search_hash = $hash;
+ } else {
+ $search_hash = "HEAD";
+ }
+ my $action = $my_uri;
+ my $use_pathinfo = gitweb_check_feature('pathinfo');
+ if ($use_pathinfo) {
+ $action .= "/".esc_url($project);
+ }
+ print $cgi->startform(-method => "get", -action => $action) .
+ "<div class=\"search\">\n" .
+ (!$use_pathinfo &&
+ $cgi->input({-name=>"p", -value=>$project, -type=>"hidden"}) . "\n") .
+ $cgi->input({-name=>"a", -value=>"search", -type=>"hidden"}) . "\n" .
+ $cgi->input({-name=>"h", -value=>$search_hash, -type=>"hidden"}) . "\n" .
+ $cgi->popup_menu(-name => 'st', -default => 'commit',
+ -values => ['commit', 'grep', 'author', 'committer', 'pickaxe']) .
+ $cgi->sup($cgi->a({-href => href(action=>"search_help")}, "?")) .
+ " search:\n",
+ $cgi->textfield(-name => "s", -value => $searchtext) . "\n" .
+ "<span title=\"Extended regular expression\">" .
+ $cgi->checkbox(-name => 'sr', -value => 1, -label => 're',
+ -checked => $search_use_regexp) .
+ "</span>" .
+ "</div>" .
+ $cgi->end_form() . "\n";
+}
+
sub git_header_html {
my $status = shift || "200 OK";
my $expires = shift;
my %opts = @_;
my $title = get_page_title();
- my $content_type;
- # require explicit support from the UA if we are to send the page as
- # 'application/xhtml+xml', otherwise send it as plain old 'text/html'.
- # we have to do this because MSIE sometimes globs '*/*', pretending to
- # support xhtml+xml but choking when it gets what it asked for.
- if (defined $cgi->http('HTTP_ACCEPT') &&
- $cgi->http('HTTP_ACCEPT') =~ m/(,|;|\s|^)application\/xhtml\+xml(,|;|\s|$)/ &&
- $cgi->Accept('application/xhtml+xml') != 0) {
- $content_type = 'application/xhtml+xml';
- } else {
- $content_type = 'text/html';
- }
+ my $content_type = get_content_type_html();
print $cgi->header(-type=>$content_type, -charset => 'utf-8',
-status=> $status, -expires => $expires)
unless ($opts{'-no_http_header'});
@@ -3767,20 +3907,10 @@ EOF
if ($ENV{'PATH_INFO'}) {
print "<base href=\"".esc_url($base_url)."\" />\n";
}
- # print out each stylesheet that exist, providing backwards capability
- # for those people who defined $stylesheet in a config file
- if (defined $stylesheet) {
- print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n";
- } else {
- foreach my $stylesheet (@stylesheets) {
- next unless $stylesheet;
- print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n";
- }
- }
- print_feed_meta()
- if ($status eq '200 OK');
- if (defined $favicon) {
- print qq(<link rel="shortcut icon" href=").esc_url($favicon).qq(" type="image/png" />\n);
+ print_header_links($status);
+
+ if (defined $site_html_head_string) {
+ print to_utf8($site_html_head_string);
}
print "</head>\n" .
@@ -3799,59 +3929,12 @@ EOF
-alt => "git",
-class => "logo"}));
}
- print $cgi->a({-href => esc_url($home_link)}, $home_link_str) . " / ";
- if (defined $project) {
- print $cgi->a({-href => href(action=>"summary")}, esc_html($project));
- if (defined $action) {
- my $action_print = $action ;
- if (defined $opts{-action_extra}) {
- $action_print = $cgi->a({-href => href(action=>$action)},
- $action);
- }
- print " / $action_print";
- }
- if (defined $opts{-action_extra}) {
- print " / $opts{-action_extra}";
- }
- print "\n";
- }
+ print_nav_breadcrumbs(%opts);
print "</div>\n";
my $have_search = gitweb_check_feature('search');
if (defined $project && $have_search) {
- if (!defined $searchtext) {
- $searchtext = "";
- }
- my $search_hash;
- if (defined $hash_base) {
- $search_hash = $hash_base;
- } elsif (defined $hash) {
- $search_hash = $hash;
- } else {
- $search_hash = "HEAD";
- }
- my $action = $my_uri;
- my $use_pathinfo = gitweb_check_feature('pathinfo');
- if ($use_pathinfo) {
- $action .= "/".esc_url($project);
- }
- print $cgi->startform(-method => "get", -action => $action) .
- "<div class=\"search\">\n" .
- (!$use_pathinfo &&
- $cgi->input({-name=>"p", -value=>$project, -type=>"hidden"}) . "\n") .
- $cgi->input({-name=>"a", -value=>"search", -type=>"hidden"}) . "\n" .
- $cgi->input({-name=>"h", -value=>$search_hash, -type=>"hidden"}) . "\n" .
- $cgi->popup_menu(-name => 'st', -default => 'commit',
- -values => ['commit', 'grep', 'author', 'committer', 'pickaxe']) .
- $cgi->sup($cgi->a({-href => href(action=>"search_help")}, "?")) .
- " search:\n",
- $cgi->textfield(-name => "s", -value => $searchtext) . "\n" .
- "<span title=\"Extended regular expression\">" .
- $cgi->checkbox(-name => 'sr', -value => 1, -label => 're',
- -checked => $search_use_regexp) .
- "</span>" .
- "</div>" .
- $cgi->end_form() . "\n";
+ print_search_form();
}
}
@@ -4777,8 +4860,97 @@ sub git_difftree_body {
print "</table>\n";
}
+sub print_sidebyside_diff_chunk {
+ my @chunk = @_;
+ my (@ctx, @rem, @add);
+
+ return unless @chunk;
+
+ # incomplete last line might be among removed or added lines,
+ # or both, or among context lines: find which
+ for (my $i = 1; $i < @chunk; $i++) {
+ if ($chunk[$i][0] eq 'incomplete') {
+ $chunk[$i][0] = $chunk[$i-1][0];
+ }
+ }
+
+ # guardian
+ push @chunk, ["", ""];
+
+ foreach my $line_info (@chunk) {
+ my ($class, $line) = @$line_info;
+
+ # print chunk headers
+ if ($class && $class eq 'chunk_header') {
+ print $line;
+ next;
+ }
+
+ ## print from accumulator when type of class of lines change
+ # empty contents block on start rem/add block, or end of chunk
+ if (@ctx && (!$class || $class eq 'rem' || $class eq 'add')) {
+ print join '',
+ '<div class="chunk_block ctx">',
+ '<div class="old">',
+ @ctx,
+ '</div>',
+ '<div class="new">',
+ @ctx,
+ '</div>',
+ '</div>';
+ @ctx = ();
+ }
+ # empty add/rem block on start context block, or end of chunk
+ if ((@rem || @add) && (!$class || $class eq 'ctx')) {
+ if (!@add) {
+ # pure removal
+ print join '',
+ '<div class="chunk_block rem">',
+ '<div class="old">',
+ @rem,
+ '</div>',
+ '</div>';
+ } elsif (!@rem) {
+ # pure addition
+ print join '',
+ '<div class="chunk_block add">',
+ '<div class="new">',
+ @add,
+ '</div>',
+ '</div>';
+ } else {
+ # assume that it is change
+ print join '',
+ '<div class="chunk_block chg">',
+ '<div class="old">',
+ @rem,
+ '</div>',
+ '<div class="new">',
+ @add,
+ '</div>',
+ '</div>';
+ }
+ @rem = @add = ();
+ }
+
+ ## adding lines to accumulator
+ # guardian value
+ last unless $line;
+ # rem, add or change
+ if ($class eq 'rem') {
+ push @rem, $line;
+ } elsif ($class eq 'add') {
+ push @add, $line;
+ }
+ # context line
+ if ($class eq 'ctx') {
+ push @ctx, $line;
+ }
+ }
+}
+
sub git_patchset_body {
- my ($fd, $difftree, $hash, @hash_parents) = @_;
+ my ($fd, $diff_style, $difftree, $hash, @hash_parents) = @_;
my ($hash_parent) = $hash_parents[0];
my $is_combined = (@hash_parents > 1);
@@ -4788,6 +4960,7 @@ sub git_patchset_body {
my $diffinfo;
my $to_name;
my (%from, %to);
+ my @chunk; # for side-by-side diff
print "<div class=\"patchset\">\n";
@@ -4894,10 +5067,29 @@ sub git_patchset_body {
next PATCH if ($patch_line =~ m/^diff /);
- print format_diff_line($patch_line, \%from, \%to);
+ my ($class, $line) = process_diff_line($patch_line, \%from, \%to);
+ my $diff_classes = "diff";
+ $diff_classes .= " $class" if ($class);
+ $line = "<div class=\"$diff_classes\">$line</div>\n";
+
+ if ($diff_style eq 'sidebyside' && !$is_combined) {
+ if ($class eq 'chunk_header') {
+ print_sidebyside_diff_chunk(@chunk);
+ @chunk = ( [ $class, $line ] );
+ } else {
+ push @chunk, [ $class, $line ];
+ }
+ } else {
+ # default 'inline' style and unknown styles
+ print $line;
+ }
}
} continue {
+ if (@chunk) {
+ print_sidebyside_diff_chunk(@chunk);
+ @chunk = ();
+ }
print "</div>\n"; # class="patch"
}
@@ -5506,6 +5698,216 @@ sub git_remotes_body {
}
}
+sub git_search_message {
+ my %co = @_;
+
+ my $greptype;
+ if ($searchtype eq 'commit') {
+ $greptype = "--grep=";
+ } elsif ($searchtype eq 'author') {
+ $greptype = "--author=";
+ } elsif ($searchtype eq 'committer') {
+ $greptype = "--committer=";
+ }
+ $greptype .= $searchtext;
+ my @commitlist = parse_commits($hash, 101, (100 * $page), undef,
+ $greptype, '--regexp-ignore-case',
+ $search_use_regexp ? '--extended-regexp' : '--fixed-strings');
+
+ my $paging_nav = '';
+ if ($page > 0) {
+ $paging_nav .=
+ $cgi->a({-href => href(-replay=>1, page=>undef)},
+ "first") .
+ " &sdot; " .
+ $cgi->a({-href => href(-replay=>1, page=>$page-1),
+ -accesskey => "p", -title => "Alt-p"}, "prev");
+ } else {
+ $paging_nav .= "first &sdot; prev";
+ }
+ my $next_link = '';
+ if ($#commitlist >= 100) {
+ $next_link =
+ $cgi->a({-href => href(-replay=>1, page=>$page+1),
+ -accesskey => "n", -title => "Alt-n"}, "next");
+ $paging_nav .= " &sdot; $next_link";
+ } else {
+ $paging_nav .= " &sdot; next";
+ }
+
+ git_header_html();
+
+ git_print_page_nav('','', $hash,$co{'tree'},$hash, $paging_nav);
+ git_print_header_div('commit', esc_html($co{'title'}), $hash);
+ if ($page == 0 && !@commitlist) {
+ print "<p>No match.</p>\n";
+ } else {
+ git_search_grep_body(\@commitlist, 0, 99, $next_link);
+ }
+
+ git_footer_html();
+}
+
+sub git_search_changes {
+ my %co = @_;
+
+ local $/ = "\n";
+ open my $fd, '-|', git_cmd(), '--no-pager', 'log', @diff_opts,
+ '--pretty=format:%H', '--no-abbrev', '--raw', "-S$searchtext",
+ ($search_use_regexp ? '--pickaxe-regex' : ())
+ or die_error(500, "Open git-log failed");
+
+ git_header_html();
+
+ git_print_page_nav('','', $hash,$co{'tree'},$hash);
+ git_print_header_div('commit', esc_html($co{'title'}), $hash);
+
+ print "<table class=\"pickaxe search\">\n";
+ my $alternate = 1;
+ undef %co;
+ my @files;
+ while (my $line = <$fd>) {
+ chomp $line;
+ next unless $line;
+
+ my %set = parse_difftree_raw_line($line);
+ if (defined $set{'commit'}) {
+ # finish previous commit
+ if (%co) {
+ print "</td>\n" .
+ "<td class=\"link\">" .
+ $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})},
+ "commit") .
+ " | " .
+ $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'},
+ hash_base=>$co{'id'})},
+ "tree") .
+ "</td>\n" .
+ "</tr>\n";
+ }
+
+ if ($alternate) {
+ print "<tr class=\"dark\">\n";
+ } else {
+ print "<tr class=\"light\">\n";
+ }
+ $alternate ^= 1;
+ %co = parse_commit($set{'commit'});
+ my $author = chop_and_escape_str($co{'author_name'}, 15, 5);
+ print "<td title=\"$co{'age_string_age'}\"><i>$co{'age_string_date'}</i></td>\n" .
+ "<td><i>$author</i></td>\n" .
+ "<td>" .
+ $cgi->a({-href => href(action=>"commit", hash=>$co{'id'}),
+ -class => "list subject"},
+ chop_and_escape_str($co{'title'}, 50) . "<br/>");
+ } elsif (defined $set{'to_id'}) {
+ next if ($set{'to_id'} =~ m/^0{40}$/);
+
+ print $cgi->a({-href => href(action=>"blob", hash_base=>$co{'id'},
+ hash=>$set{'to_id'}, file_name=>$set{'to_file'}),
+ -class => "list"},
+ "<span class=\"match\">" . esc_path($set{'file'}) . "</span>") .
+ "<br/>\n";
+ }
+ }
+ close $fd;
+
+ # finish last commit (warning: repetition!)
+ if (%co) {
+ print "</td>\n" .
+ "<td class=\"link\">" .
+ $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})},
+ "commit") .
+ " | " .
+ $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'},
+ hash_base=>$co{'id'})},
+ "tree") .
+ "</td>\n" .
+ "</tr>\n";
+ }
+
+ print "</table>\n";
+
+ git_footer_html();
+}
+
+sub git_search_files {
+ my %co = @_;
+
+ local $/ = "\n";
+ open my $fd, "-|", git_cmd(), 'grep', '-n',
+ $search_use_regexp ? ('-E', '-i') : '-F',
+ $searchtext, $co{'tree'}
+ or die_error(500, "Open git-grep failed");
+
+ git_header_html();
+
+ git_print_page_nav('','', $hash,$co{'tree'},$hash);
+ git_print_header_div('commit', esc_html($co{'title'}), $hash);
+
+ print "<table class=\"grep_search\">\n";
+ my $alternate = 1;
+ my $matches = 0;
+ my $lastfile = '';
+ while (my $line = <$fd>) {
+ chomp $line;
+ my ($file, $lno, $ltext, $binary);
+ last if ($matches++ > 1000);
+ if ($line =~ /^Binary file (.+) matches$/) {
+ $file = $1;
+ $binary = 1;
+ } else {
+ (undef, $file, $lno, $ltext) = split(/:/, $line, 4);
+ }
+ if ($file ne $lastfile) {
+ $lastfile and print "</td></tr>\n";
+ if ($alternate++) {
+ print "<tr class=\"dark\">\n";
+ } else {
+ print "<tr class=\"light\">\n";
+ }
+ print "<td class=\"list\">".
+ $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'},
+ file_name=>"$file"),
+ -class => "list"}, esc_path($file));
+ print "</td><td>\n";
+ $lastfile = $file;
+ }
+ if ($binary) {
+ print "<div class=\"binary\">Binary file</div>\n";
+ } else {
+ $ltext = untabify($ltext);
+ if ($ltext =~ m/^(.*)($search_regexp)(.*)$/i) {
+ $ltext = esc_html($1, -nbsp=>1);
+ $ltext .= '<span class="match">';
+ $ltext .= esc_html($2, -nbsp=>1);
+ $ltext .= '</span>';
+ $ltext .= esc_html($3, -nbsp=>1);
+ } else {
+ $ltext = esc_html($ltext, -nbsp=>1);
+ }
+ print "<div class=\"pre\">" .
+ $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'},
+ file_name=>"$file").'#l'.$lno,
+ -class => "linenr"}, sprintf('%4i', $lno))
+ . ' ' . $ltext . "</div>\n";
+ }
+ }
+ if ($lastfile) {
+ print "</td></tr>\n";
+ if ($matches > 1000) {
+ print "<div class=\"diff nodifferences\">Too many matches, listing trimmed</div>\n";
+ }
+ } else {
+ print "<div class=\"diff nodifferences\">No matches found</div>\n";
+ }
+ close $fd;
+
+ print "</table>\n";
+
+ git_footer_html();
+}
+
sub git_search_grep_body {
my ($commitlist, $from, $to, $extra) = @_;
$from = 0 unless defined $from;
@@ -6236,7 +6638,8 @@ sub git_blob {
$nr++;
$line = untabify($line);
printf qq!<div class="pre"><a id="l%i" href="%s#l%i" class="linenr">%4i</a> %s</div>\n!,
- $nr, esc_attr(href(-replay => 1)), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1);
+ $nr, esc_attr(href(-replay => 1)), $nr, $nr,
+ $syntax ? sanitize($line) : esc_html($line, -nbsp=>1);
}
}
close $fd
@@ -6682,6 +7085,7 @@ sub git_object {
sub git_blobdiff {
my $format = shift || 'html';
+ my $diff_style = $input_params{'diff_style'} || 'inline';
my $fd;
my @difftree;
@@ -6760,6 +7164,7 @@ sub git_blobdiff {
my $formats_nav =
$cgi->a({-href => href(action=>"blobdiff_plain", -replay=>1)},
"raw");
+ $formats_nav .= diff_style_nav($diff_style);
git_header_html(undef, $expires);
if (defined $hash_base && (my %co = parse_commit($hash_base))) {
git_print_page_nav('','', $hash_base,$co{'tree'},$hash_base, $formats_nav);
@@ -6791,7 +7196,8 @@ sub git_blobdiff {
if ($format eq 'html') {
print "<div class=\"page_body\">\n";
- git_patchset_body($fd, [ \%diffinfo ], $hash_base, $hash_parent_base);
+ git_patchset_body($fd, $diff_style,
+ [ \%diffinfo ], $hash_base, $hash_parent_base);
close $fd;
print "</div>\n"; # class="page_body"
@@ -6816,9 +7222,31 @@ sub git_blobdiff_plain {
git_blobdiff('plain');
}
+# assumes that it is added as later part of already existing navigation,
+# so it returns "| foo | bar" rather than just "foo | bar"
+sub diff_style_nav {
+ my ($diff_style, $is_combined) = @_;
+ $diff_style ||= 'inline';
+
+ return "" if ($is_combined);
+
+ my @styles = (inline => 'inline', 'sidebyside' => 'side by side');
+ my %styles = @styles;
+ @styles =
+ @styles[ map { $_ * 2 } 0..$#styles/2 ];
+
+ return join '',
+ map { " | ".$_ }
+ map {
+ $_ eq $diff_style ? $styles{$_} :
+ $cgi->a({-href => href(-replay=>1, diff_style => $_)}, $styles{$_})
+ } @styles;
+}
+
sub git_commitdiff {
my %params = @_;
my $format = $params{-format} || 'html';
+ my $diff_style = $input_params{'diff_style'} || 'inline';
my ($patch_max) = gitweb_get_feature('patches');
if ($format eq 'patch') {
@@ -6844,6 +7272,7 @@ sub git_commitdiff {
$cgi->a({-href => href(action=>"patch", -replay=>1)},
"patch");
}
+ $formats_nav .= diff_style_nav($diff_style, @{$co{'parents'}} > 1);
if (defined $hash_parent &&
$hash_parent ne '-c' && $hash_parent ne '--cc') {
@@ -6861,8 +7290,8 @@ sub git_commitdiff {
}
}
$formats_nav .= ': ' .
- $cgi->a({-href => href(action=>"commitdiff",
- hash=>$hash_parent)},
+ $cgi->a({-href => href(-replay=>1,
+ hash=>$hash_parent, hash_base=>undef)},
esc_html($hash_parent_short)) .
')';
} elsif (!$co{'parent'}) {
@@ -6872,28 +7301,28 @@ sub git_commitdiff {
# single parent commit
$formats_nav .=
' (parent: ' .
- $cgi->a({-href => href(action=>"commitdiff",
- hash=>$co{'parent'})},
+ $cgi->a({-href => href(-replay=>1,
+ hash=>$co{'parent'}, hash_base=>undef)},
esc_html(substr($co{'parent'}, 0, 7))) .
')';
} else {
# merge commit
if ($hash_parent eq '--cc') {
$formats_nav .= ' | ' .
- $cgi->a({-href => href(action=>"commitdiff",
+ $cgi->a({-href => href(-replay=>1,
hash=>$hash, hash_parent=>'-c')},
'combined');
} else { # $hash_parent eq '-c'
$formats_nav .= ' | ' .
- $cgi->a({-href => href(action=>"commitdiff",
+ $cgi->a({-href => href(-replay=>1,
hash=>$hash, hash_parent=>'--cc')},
'compact');
}
$formats_nav .=
' (merge: ' .
join(' ', map {
- $cgi->a({-href => href(action=>"commitdiff",
- hash=>$_)},
+ $cgi->a({-href => href(-replay=>1,
+ hash=>$_, hash_base=>undef)},
esc_html(substr($_, 0, 7)));
} @{$co{'parents'}} ) .
')';
@@ -7022,7 +7451,8 @@ sub git_commitdiff {
$use_parents ? @{$co{'parents'}} : $hash_parent);
print "<br/>\n";
- git_patchset_body($fd, \@difftree, $hash,
+ git_patchset_body($fd, $diff_style,
+ \@difftree, $hash,
$use_parents ? @{$co{'parents'}} : $hash_parent);
close $fd;
print "</div>\n"; # class="page_body"
@@ -7061,7 +7491,23 @@ sub git_history {
}
sub git_search {
- gitweb_check_feature('search') or die_error(403, "Search is disabled");
+ $searchtype ||= 'commit';
+
+ # check if appropriate features are enabled
+ gitweb_check_feature('search')
+ or die_error(403, "Search is disabled");
+ if ($searchtype eq 'pickaxe') {
+ # pickaxe may take all resources of your box and run for several minutes
+ # with every query - so decide by yourself how public you make this feature
+ gitweb_check_feature('pickaxe')
+ or die_error(403, "Pickaxe search is disabled");
+ }
+ if ($searchtype eq 'grep') {
+ # grep search might be potentially CPU-intensive, too
+ gitweb_check_feature('grep')
+ or die_error(403, "Grep search is disabled");
+ }
+
if (!defined $searchtext) {
die_error(400, "Text field is empty");
}
@@ -7076,205 +7522,17 @@ sub git_search {
$page = 0;
}
- $searchtype ||= 'commit';
- if ($searchtype eq 'pickaxe') {
- # pickaxe may take all resources of your box and run for several minutes
- # with every query - so decide by yourself how public you make this feature
- gitweb_check_feature('pickaxe')
- or die_error(403, "Pickaxe is disabled");
- }
- if ($searchtype eq 'grep') {
- gitweb_check_feature('grep')
- or die_error(403, "Grep is disabled");
- }
-
- git_header_html();
-
- if ($searchtype eq 'commit' or $searchtype eq 'author' or $searchtype eq 'committer') {
- my $greptype;
- if ($searchtype eq 'commit') {
- $greptype = "--grep=";
- } elsif ($searchtype eq 'author') {
- $greptype = "--author=";
- } elsif ($searchtype eq 'committer') {
- $greptype = "--committer=";
- }
- $greptype .= $searchtext;
- my @commitlist = parse_commits($hash, 101, (100 * $page), undef,
- $greptype, '--regexp-ignore-case',
- $search_use_regexp ? '--extended-regexp' : '--fixed-strings');
-
- my $paging_nav = '';
- if ($page > 0) {
- $paging_nav .=
- $cgi->a({-href => href(action=>"search", hash=>$hash,
- searchtext=>$searchtext,
- searchtype=>$searchtype)},
- "first");
- $paging_nav .= " &sdot; " .
- $cgi->a({-href => href(-replay=>1, page=>$page-1),
- -accesskey => "p", -title => "Alt-p"}, "prev");
- } else {
- $paging_nav .= "first";
- $paging_nav .= " &sdot; prev";
- }
- my $next_link = '';
- if ($#commitlist >= 100) {
- $next_link =
- $cgi->a({-href => href(-replay=>1, page=>$page+1),
- -accesskey => "n", -title => "Alt-n"}, "next");
- $paging_nav .= " &sdot; $next_link";
- } else {
- $paging_nav .= " &sdot; next";
- }
-
- git_print_page_nav('','', $hash,$co{'tree'},$hash, $paging_nav);
- git_print_header_div('commit', esc_html($co{'title'}), $hash);
- if ($page == 0 && !@commitlist) {
- print "<p>No match.</p>\n";
- } else {
- git_search_grep_body(\@commitlist, 0, 99, $next_link);
- }
- }
-
- if ($searchtype eq 'pickaxe') {
- git_print_page_nav('','', $hash,$co{'tree'},$hash);
- git_print_header_div('commit', esc_html($co{'title'}), $hash);
-
- print "<table class=\"pickaxe search\">\n";
- my $alternate = 1;
- local $/ = "\n";
- open my $fd, '-|', git_cmd(), '--no-pager', 'log', @diff_opts,
- '--pretty=format:%H', '--no-abbrev', '--raw', "-S$searchtext",
- ($search_use_regexp ? '--pickaxe-regex' : ());
- undef %co;
- my @files;
- while (my $line = <$fd>) {
- chomp $line;
- next unless $line;
-
- my %set = parse_difftree_raw_line($line);
- if (defined $set{'commit'}) {
- # finish previous commit
- if (%co) {
- print "</td>\n" .
- "<td class=\"link\">" .
- $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})}, "commit") .
- " | " .
- $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'}, hash_base=>$co{'id'})}, "tree");
- print "</td>\n" .
- "</tr>\n";
- }
-
- if ($alternate) {
- print "<tr class=\"dark\">\n";
- } else {
- print "<tr class=\"light\">\n";
- }
- $alternate ^= 1;
- %co = parse_commit($set{'commit'});
- my $author = chop_and_escape_str($co{'author_name'}, 15, 5);
- print "<td title=\"$co{'age_string_age'}\"><i>$co{'age_string_date'}</i></td>\n" .
- "<td><i>$author</i></td>\n" .
- "<td>" .
- $cgi->a({-href => href(action=>"commit", hash=>$co{'id'}),
- -class => "list subject"},
- chop_and_escape_str($co{'title'}, 50) . "<br/>");
- } elsif (defined $set{'to_id'}) {
- next if ($set{'to_id'} =~ m/^0{40}$/);
-
- print $cgi->a({-href => href(action=>"blob", hash_base=>$co{'id'},
- hash=>$set{'to_id'}, file_name=>$set{'to_file'}),
- -class => "list"},
- "<span class=\"match\">" . esc_path($set{'file'}) . "</span>") .
- "<br/>\n";
- }
- }
- close $fd;
-
- # finish last commit (warning: repetition!)
- if (%co) {
- print "</td>\n" .
- "<td class=\"link\">" .
- $cgi->a({-href => href(action=>"commit", hash=>$co{'id'})}, "commit") .
- " | " .
- $cgi->a({-href => href(action=>"tree", hash=>$co{'tree'}, hash_base=>$co{'id'})}, "tree");
- print "</td>\n" .
- "</tr>\n";
- }
-
- print "</table>\n";
- }
-
- if ($searchtype eq 'grep') {
- git_print_page_nav('','', $hash,$co{'tree'},$hash);
- git_print_header_div('commit', esc_html($co{'title'}), $hash);
-
- print "<table class=\"grep_search\">\n";
- my $alternate = 1;
- my $matches = 0;
- local $/ = "\n";
- open my $fd, "-|", git_cmd(), 'grep', '-n',
- $search_use_regexp ? ('-E', '-i') : '-F',
- $searchtext, $co{'tree'};
- my $lastfile = '';
- while (my $line = <$fd>) {
- chomp $line;
- my ($file, $lno, $ltext, $binary);
- last if ($matches++ > 1000);
- if ($line =~ /^Binary file (.+) matches$/) {
- $file = $1;
- $binary = 1;
- } else {
- (undef, $file, $lno, $ltext) = split(/:/, $line, 4);
- }
- if ($file ne $lastfile) {
- $lastfile and print "</td></tr>\n";
- if ($alternate++) {
- print "<tr class=\"dark\">\n";
- } else {
- print "<tr class=\"light\">\n";
- }
- print "<td class=\"list\">".
- $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'},
- file_name=>"$file"),
- -class => "list"}, esc_path($file));
- print "</td><td>\n";
- $lastfile = $file;
- }
- if ($binary) {
- print "<div class=\"binary\">Binary file</div>\n";
- } else {
- $ltext = untabify($ltext);
- if ($ltext =~ m/^(.*)($search_regexp)(.*)$/i) {
- $ltext = esc_html($1, -nbsp=>1);
- $ltext .= '<span class="match">';
- $ltext .= esc_html($2, -nbsp=>1);
- $ltext .= '</span>';
- $ltext .= esc_html($3, -nbsp=>1);
- } else {
- $ltext = esc_html($ltext, -nbsp=>1);
- }
- print "<div class=\"pre\">" .
- $cgi->a({-href => href(action=>"blob", hash=>$co{'hash'},
- file_name=>"$file").'#l'.$lno,
- -class => "linenr"}, sprintf('%4i', $lno))
- . ' ' . $ltext . "</div>\n";
- }
- }
- if ($lastfile) {
- print "</td></tr>\n";
- if ($matches > 1000) {
- print "<div class=\"diff nodifferences\">Too many matches, listing trimmed</div>\n";
- }
- } else {
- print "<div class=\"diff nodifferences\">No matches found</div>\n";
- }
- close $fd;
-
- print "</table>\n";
+ if ($searchtype eq 'commit' ||
+ $searchtype eq 'author' ||
+ $searchtype eq 'committer') {
+ git_search_message(%co);
+ } elsif ($searchtype eq 'pickaxe') {
+ git_search_changes(%co);
+ } elsif ($searchtype eq 'grep') {
+ git_search_files(%co);
+ } else {
+ die_error(400, "Unknown search type");
}
- git_footer_html();
}
sub git_search_help {
diff --git a/gitweb/static/gitweb.css b/gitweb/static/gitweb.css
index 7d88509208..c7827e8f1d 100644
--- a/gitweb/static/gitweb.css
+++ b/gitweb/static/gitweb.css
@@ -475,6 +475,36 @@ div.diff.nodifferences {
color: #600000;
}
+/* side-by-side diff */
+div.chunk_block {
+ overflow: hidden;
+}
+
+div.chunk_block div.old {
+ float: left;
+ width: 50%;
+ overflow: hidden;
+}
+
+div.chunk_block div.new {
+ margin-left: 50%;
+ width: 50%;
+}
+
+div.chunk_block.rem div.old div.diff.rem {
+ background-color: #fff5f5;
+}
+div.chunk_block.add div.new div.diff.add {
+ background-color: #f8fff8;
+}
+div.chunk_block.chg div div.diff {
+ background-color: #fffff0;
+}
+div.chunk_block.ctx div div.diff.ctx {
+ color: #404040;
+}
+
+
div.index_include {
border: solid #d9d8d1;
border-width: 0px 0px 1px;
diff --git a/gitweb/static/js/blame_incremental.js b/gitweb/static/js/blame_incremental.js
index 676da6b590..db6eb50584 100644
--- a/gitweb/static/js/blame_incremental.js
+++ b/gitweb/static/js/blame_incremental.js
@@ -29,7 +29,6 @@
/* ............................................................ */
/* utility/helper functions (and variables) */
-var xhr; // XMLHttpRequest object
var projectUrl; // partial query + separator ('?' or ';')
// 'commits' is an associative map. It maps SHA1s to Commit objects.
@@ -420,8 +419,6 @@ function handleLine(commit, group) {
// ----------------------------------------------------------------------
-var inProgress = false; // are we processing response
-
/**#@+
* @constant
*/
@@ -433,8 +430,6 @@ var endRe = /^END ?([^ ]*) ?(.*)/;
var curCommit = new Commit();
var curGroup = {};
-var pollTimer = null;
-
/**
* Parse output from 'git blame --incremental [...]', received via
* XMLHttpRequest from server (blamedataUrl), and call handleLine
@@ -535,43 +530,51 @@ function processData(unprocessed, nextReadPos) {
* Handle XMLHttpRequest errors
*
* @param {XMLHttpRequest} xhr: XMLHttpRequest object
+ * @param {Number} [xhr.pollTimer] ID of the timeout to clear
*
- * @globals pollTimer, commits, inProgress
+ * @globals commits
*/
function handleError(xhr) {
errorInfo('Server error: ' +
xhr.status + ' - ' + (xhr.statusText || 'Error contacting server'));
- clearInterval(pollTimer);
+ if (typeof xhr.pollTimer === "number") {
+ clearTimeout(xhr.pollTimer);
+ delete xhr.pollTimer;
+ }
commits = {}; // free memory
-
- inProgress = false;
}
/**
* Called after XMLHttpRequest finishes (loads)
*
- * @param {XMLHttpRequest} xhr: XMLHttpRequest object (unused)
+ * @param {XMLHttpRequest} xhr: XMLHttpRequest object
+ * @param {Number} [xhr.pollTimer] ID of the timeout to clear
*
- * @globals pollTimer, commits, inProgress
+ * @globals commits
*/
function responseLoaded(xhr) {
- clearInterval(pollTimer);
+ if (typeof xhr.pollTimer === "number") {
+ clearTimeout(xhr.pollTimer);
+ delete xhr.pollTimer;
+ }
fixColorsAndGroups();
writeTimeInterval();
commits = {}; // free memory
-
- inProgress = false;
}
/**
* handler for XMLHttpRequest onreadystatechange event
* @see startBlame
*
- * @globals xhr, inProgress
+ * @param {XMLHttpRequest} xhr: XMLHttpRequest object
+ * @param {Number} xhr.prevDataLength: previous value of xhr.responseText.length
+ * @param {Number} xhr.nextReadPos: start of unread part of xhr.responseText
+ * @param {Number} [xhr.pollTimer] ID of the timeout (to reset or cancel)
+ * @param {Boolean} fromTimer: if handler was called from timer
*/
-function handleResponse() {
+function handleResponse(xhr, fromTimer) {
/*
* xhr.readyState
@@ -609,32 +612,31 @@ function handleResponse() {
return;
}
- // in case we were called before finished processing
- if (inProgress) {
- return;
- } else {
- inProgress = true;
- }
// extract new whole (complete) lines, and process them
- while (xhr.prevDataLength !== xhr.responseText.length) {
- if (xhr.readyState === 4 &&
- xhr.prevDataLength === xhr.responseText.length) {
- break;
- }
-
+ if (xhr.prevDataLength !== xhr.responseText.length) {
xhr.prevDataLength = xhr.responseText.length;
var unprocessed = xhr.responseText.substring(xhr.nextReadPos);
xhr.nextReadPos = processData(unprocessed, xhr.nextReadPos);
- } // end while
+ }
// did we finish work?
- if (xhr.readyState === 4 &&
- xhr.prevDataLength === xhr.responseText.length) {
+ if (xhr.readyState === 4) {
responseLoaded(xhr);
+ return;
}
- inProgress = false;
+ // if we get from timer, we have to restart it
+ // otherwise onreadystatechange gives us partial response, timer not needed
+ if (fromTimer) {
+ setTimeout(function () {
+ handleResponse(xhr, true);
+ }, 1000);
+
+ } else if (typeof xhr.pollTimer === "number") {
+ clearTimeout(xhr.pollTimer);
+ delete xhr.pollTimer;
+ }
}
// ============================================================
@@ -649,11 +651,11 @@ function handleResponse() {
* Called from 'blame_incremental' view after loading table with
* file contents, a base for blame view.
*
- * @globals xhr, t0, projectUrl, div_progress_bar, totalLines, pollTimer
+ * @globals t0, projectUrl, div_progress_bar, totalLines
*/
function startBlame(blamedataUrl, bUrl) {
- xhr = createRequestObject();
+ var xhr = createRequestObject();
if (!xhr) {
errorInfo('ERROR: XMLHttpRequest not supported');
return;
@@ -672,8 +674,9 @@ function startBlame(blamedataUrl, bUrl) {
xhr.prevDataLength = -1; // used to detect if we have new data
xhr.nextReadPos = 0; // where unread part of response starts
- xhr.onreadystatechange = handleResponse;
- //xhr.onreadystatechange = function () { handleResponse(xhr); };
+ xhr.onreadystatechange = function () {
+ handleResponse(xhr, false);
+ };
xhr.open('GET', blamedataUrl);
xhr.setRequestHeader('Accept', 'text/plain');
@@ -681,7 +684,9 @@ function startBlame(blamedataUrl, bUrl) {
// not all browsers call onreadystatechange event on each server flush
// poll response using timer every second to handle this issue
- pollTimer = setInterval(xhr.onreadystatechange, 1000);
+ xhr.pollTimer = setTimeout(function () {
+ handleResponse(xhr, true);
+ }, 1000);
}
/* end of blame_incremental.js */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 07:52:37 +0000