diff options
Diffstat (limited to 'gitweb')
| -rw-r--r-- | gitweb/INSTALL | 26 | ||||
| -rw-r--r-- | gitweb/Makefile | 89 | ||||
| -rw-r--r-- | gitweb/README | 70 | ||||
| -rwxr-xr-x | gitweb/gitweb.perl | 28 |
4 files changed, 151 insertions, 62 deletions
diff --git a/gitweb/INSTALL b/gitweb/INSTALL index b76a0cffff..cbdc136470 100644 --- a/gitweb/INSTALL +++ b/gitweb/INSTALL @@ -2,11 +2,11 @@ GIT web Interface (gitweb) Installation ======================================= First you have to generate gitweb.cgi from gitweb.perl using -"make gitweb/gitweb.cgi", then copy appropriate files (gitweb.cgi, +"make gitweb", then copy appropriate files (gitweb.cgi, gitweb.js, gitweb.css, git-logo.png and git-favicon.png) to their destination. For example if git was (or is) installed with /usr prefix, you can do - $ make prefix=/usr gitweb/gitweb.cgi ;# as yourself + $ make prefix=/usr gitweb ;# as yourself # cp gitweb/git* /var/www/cgi-bin/ ;# as root Alternatively you can use autoconf generated ./configure script to @@ -15,7 +15,7 @@ instead $ make configure ;# as yourself $ ./configure --prefix=/usr ;# as yourself - $ make gitweb/gitweb.cgi ;# as yourself + $ make gitweb ;# as yourself # cp gitweb/git* /var/www/cgi-bin/ ;# as root The above example assumes that your web server is configured to run @@ -31,8 +31,7 @@ file for gitweb (in gitweb/README). - There are many configuration variables which affect building of gitweb.cgi; see "default configuration for gitweb" section in main - (top dir) Makefile, and instructions for building gitweb/gitweb.cgi - target. + (top dir) Makefile, and instructions for building gitweb target. One of the most important is where to find the git wrapper binary. Gitweb tries to find the git wrapper at $(bindir)/git, so you have to set $bindir @@ -62,9 +61,15 @@ file for gitweb (in gitweb/README). a suggestion). - You can control where gitweb tries to find its main CSS style file, - its favicon and logo with the GITWEB_CSS, GITWEB_FAVICON and GITWEB_LOGO - build configuration variables. By default gitweb tries to find them - in the same directory as gitweb.cgi script. + its JavaScript file, its favicon and logo with the GITWEB_CSS, GITWEB_JS + GITWEB_FAVICON and GITWEB_LOGO build configuration variables. By default + gitweb tries to find them in the same directory as gitweb.cgi script. + +- You can optionally generate minified versions of gitweb.js and gitweb.css + by defining the JSMIN and CSSMIN build configuration variables. By default + the non-minified versions will be used. NOTE: if you enable this option, + substitute gitweb.min.js and gitweb.min.css for all uses of gitweb.js and + gitweb.css in the help files. Build example ~~~~~~~~~~~~~ @@ -74,13 +79,14 @@ Build example we want to display are under /home/local/scm, you can do make GITWEB_PROJECTROOT="/home/local/scm" \ + GITWEB_JS="/gitweb/gitweb.js" \ GITWEB_CSS="/gitweb/gitweb.css" \ GITWEB_LOGO="/gitweb/git-logo.png" \ GITWEB_FAVICON="/gitweb/git-favicon.png" \ bindir=/usr/local/bin \ - gitweb/gitweb.cgi + gitweb - cp -fv ~/git/gitweb/gitweb.{cgi,css} \ + cp -fv ~/git/gitweb/gitweb.{cgi,js,css} \ ~/git/gitweb/git-{favicon,logo}.png \ /var/www/cgi-bin/gitweb/ diff --git a/gitweb/Makefile b/gitweb/Makefile index c9eb1ee667..f2e1d92fbb 100644 --- a/gitweb/Makefile +++ b/gitweb/Makefile @@ -6,14 +6,14 @@ all:: # Define JSMIN to point to JavaScript minifier that functions as # a filter to have gitweb.js minified. # +# Define CSSMIN to point to a CSS minifier in order to generate a minified +# version of gitweb.css +# prefix ?= $(HOME) bindir ?= $(prefix)/bin RM ?= rm -f -# JavaScript minifier invocation that can function as filter -JSMIN ?= - # default configuration for gitweb GITWEB_CONFIG = gitweb_config.perl GITWEB_CONFIG_SYSTEM = /etc/gitweb.conf @@ -29,11 +29,7 @@ GITWEB_HOMETEXT = indextext.html GITWEB_CSS = gitweb.css GITWEB_LOGO = git-logo.png GITWEB_FAVICON = git-favicon.png -ifdef JSMIN -GITWEB_JS = gitweb.min.js -else GITWEB_JS = gitweb.js -endif GITWEB_SITE_HEADER = GITWEB_SITE_FOOTER = @@ -85,45 +81,54 @@ endif all:: gitweb.cgi ifdef JSMIN -FILES=gitweb.cgi gitweb.min.js -gitweb.cgi: gitweb.perl gitweb.min.js -else # !JSMIN -FILES=gitweb.cgi -gitweb.cgi: gitweb.perl -endif # JSMIN - -gitweb.cgi: +GITWEB_JS = gitweb.min.js +all:: gitweb.min.js +gitweb.min.js: gitweb.js GITWEB-BUILD-OPTIONS + $(QUIET_GEN)$(JSMIN) <$< >$@ +endif + +ifdef CSSMIN +GITWEB_CSS = gitweb.min.css +all:: gitweb.min.css +gitweb.min.css: gitweb.css GITWEB-BUILD-OPTIONS + $(QUIET_GEN)$(CSSMIN) <$ >$@ +endif + +GITWEB_REPLACE = \ + -e 's|++GIT_VERSION++|$(GIT_VERSION)|g' \ + -e 's|++GIT_BINDIR++|$(bindir)|g' \ + -e 's|++GITWEB_CONFIG++|$(GITWEB_CONFIG)|g' \ + -e 's|++GITWEB_CONFIG_SYSTEM++|$(GITWEB_CONFIG_SYSTEM)|g' \ + -e 's|++GITWEB_HOME_LINK_STR++|$(GITWEB_HOME_LINK_STR)|g' \ + -e 's|++GITWEB_SITENAME++|$(GITWEB_SITENAME)|g' \ + -e 's|++GITWEB_PROJECTROOT++|$(GITWEB_PROJECTROOT)|g' \ + -e 's|"++GITWEB_PROJECT_MAXDEPTH++"|$(GITWEB_PROJECT_MAXDEPTH)|g' \ + -e 's|++GITWEB_EXPORT_OK++|$(GITWEB_EXPORT_OK)|g' \ + -e 's|++GITWEB_STRICT_EXPORT++|$(GITWEB_STRICT_EXPORT)|g' \ + -e 's|++GITWEB_BASE_URL++|$(GITWEB_BASE_URL)|g' \ + -e 's|++GITWEB_LIST++|$(GITWEB_LIST)|g' \ + -e 's|++GITWEB_HOMETEXT++|$(GITWEB_HOMETEXT)|g' \ + -e 's|++GITWEB_CSS++|$(GITWEB_CSS)|g' \ + -e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \ + -e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \ + -e 's|++GITWEB_JS++|$(GITWEB_JS)|g' \ + -e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \ + -e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g' + +GITWEB-BUILD-OPTIONS: FORCE + @rm -f $@+ + @echo "x" '$(PERL_PATH_SQ)' $(GITWEB_REPLACE) "$(JSMIN)|$(CSSMIN)" >$@+ + @cmp -s $@+ $@ && rm -f $@+ || mv -f $@+ $@ + +gitweb.cgi: gitweb.perl GITWEB-BUILD-OPTIONS $(QUIET_GEN)$(RM) $@ $@+ && \ sed -e '1s|#!.*perl|#!$(PERL_PATH_SQ)|' \ - -e 's|++GIT_VERSION++|$(GIT_VERSION)|g' \ - -e 's|++GIT_BINDIR++|$(bindir)|g' \ - -e 's|++GITWEB_CONFIG++|$(GITWEB_CONFIG)|g' \ - -e 's|++GITWEB_CONFIG_SYSTEM++|$(GITWEB_CONFIG_SYSTEM)|g' \ - -e 's|++GITWEB_HOME_LINK_STR++|$(GITWEB_HOME_LINK_STR)|g' \ - -e 's|++GITWEB_SITENAME++|$(GITWEB_SITENAME)|g' \ - -e 's|++GITWEB_PROJECTROOT++|$(GITWEB_PROJECTROOT)|g' \ - -e 's|"++GITWEB_PROJECT_MAXDEPTH++"|$(GITWEB_PROJECT_MAXDEPTH)|g' \ - -e 's|++GITWEB_EXPORT_OK++|$(GITWEB_EXPORT_OK)|g' \ - -e 's|++GITWEB_STRICT_EXPORT++|$(GITWEB_STRICT_EXPORT)|g' \ - -e 's|++GITWEB_BASE_URL++|$(GITWEB_BASE_URL)|g' \ - -e 's|++GITWEB_LIST++|$(GITWEB_LIST)|g' \ - -e 's|++GITWEB_HOMETEXT++|$(GITWEB_HOMETEXT)|g' \ - -e 's|++GITWEB_CSS++|$(GITWEB_CSS)|g' \ - -e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \ - -e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \ - -e 's|++GITWEB_JS++|$(GITWEB_JS)|g' \ - -e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \ - -e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g' \ - $< >$@+ && \ + $(GITWEB_REPLACE) $< >$@+ && \ chmod +x $@+ && \ mv $@+ $@ -ifdef JSMIN -gitweb.min.js: gitweb.js - $(QUIET_GEN)$(JSMIN) <$< >$@ -endif # JSMIN - clean: - $(RM) $(FILES) + $(RM) gitweb.cgi gitweb.min.js gitweb.min.css GITWEB-BUILD-OPTIONS + +.PHONY: all clean .FORCE-GIT-VERSION-FILE FORCE -.PHONY: all clean .FORCE-GIT-VERSION-FILE diff --git a/gitweb/README b/gitweb/README index 6c2c8e1259..71742b335d 100644 --- a/gitweb/README +++ b/gitweb/README @@ -80,7 +80,8 @@ You can specify the following configuration variables when building GIT: Points to the location where you put gitweb.css on your web server (or to be more generic, the URI of gitweb stylesheet). Relative to the base URI of gitweb. Note that you can setup multiple stylesheets from - the gitweb config file. [Default: gitweb.css] + the gitweb config file. [Default: gitweb.css (or gitweb.min.css if the + CSSMIN variable is defined / CSS minifier is used)] * GITWEB_LOGO Points to the location where you put git-logo.png on your web server (or to be more generic URI of logo, 72x27 size, displayed in top right @@ -312,12 +313,16 @@ If you want to have one URL for both gitweb and your http:// repositories, you can configure apache like this: <VirtualHost *:80> - ServerName git.example.org - DocumentRoot /pub/git - SetEnv GITWEB_CONFIG /etc/gitweb.conf + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite RewriteEngine on + # make the front page an internal rewrite to the gitweb script RewriteRule ^/$ /cgi-bin/gitweb.cgi + # make access for "dumb clients" work RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] </VirtualHost> @@ -343,6 +348,63 @@ something like the following in your gitweb.conf (or gitweb_config.perl) file: $home_link = "/"; +Webserver configuration with multiple projects' root +---------------------------------------------------- + +If you want to use gitweb with several project roots you can edit your apache +virtual host and gitweb.conf configuration files like this : + +virtual host configuration : + +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT] + + # look for a public_git folder in unix users' home + # http://git.example.org/~<user>/ + RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/+<user>/ + #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/user/<user>/ + #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # defined list of project roots + RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT] + RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT] + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> + +gitweb.conf configuration : + +$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; + +These configurations enable two things. First, each unix user (<user>) of the +server will be able to browse through gitweb git repositories found in +~/public_git/ with the following url : http://git.example.org/~<user>/ + +If you do not want this feature on your server just remove the second rewrite rule. + +If you already use mod_userdir in your virtual host or you don't want to use +the '~' as first character just comment or remove the second rewrite rule and +uncomment one of the following according to what you want. + +Second, repositories found in /pub/scm/ and /var/git/ will be accesible +through http://git.example.org/scm/ and http://git.example.org/var/. +You can add as many project roots as you want by adding rewrite rules like the +third and the fourth. + + PATH_INFO usage ----------------------- If you enable PATH_INFO usage in gitweb by putting diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 1f6978ac1f..c356e95f18 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -454,7 +454,11 @@ sub gitweb_get_feature { $feature{$name}{'sub'}, $feature{$name}{'override'}, @{$feature{$name}{'default'}}); - if (!$override) { return @defaults; } + # project specific override is possible only if we have project + our $git_dir; # global variable, declared later + if (!$override || !defined $git_dir) { + return @defaults; + } if (!defined $sub) { warn "feature $name is not overridable"; return @defaults; @@ -550,11 +554,14 @@ sub filter_snapshot_fmts { } our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++"; +our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++"; +# die if there are errors parsing config file if (-e $GITWEB_CONFIG) { do $GITWEB_CONFIG; -} else { - our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++"; - do $GITWEB_CONFIG_SYSTEM if -e $GITWEB_CONFIG_SYSTEM; + die $@ if $@; +} elsif (-e $GITWEB_CONFIG_SYSTEM) { + do $GITWEB_CONFIG_SYSTEM; + die $@ if $@; } # Get loadavg of system, to compare against $maxload. @@ -1143,6 +1150,7 @@ sub validate_refname { # in utf-8 thanks to "binmode STDOUT, ':utf8'" at beginning sub to_utf8 { my $str = shift; + return undef unless defined $str; if (utf8::valid($str)) { utf8::decode($str); return $str; @@ -1155,6 +1163,7 @@ sub to_utf8 { # correct, but quoted slashes look too horrible in bookmarks sub esc_param { my $str = shift; + return undef unless defined $str; $str =~ s/([^A-Za-z0-9\-_.~()\/:@ ]+)/CGI::escape($1)/eg; $str =~ s/ /\+/g; return $str; @@ -1163,6 +1172,7 @@ sub esc_param { # quote unsafe chars in whole URL, so some charactrs cannot be quoted sub esc_url { my $str = shift; + return undef unless defined $str; $str =~ s/([^A-Za-z0-9\-_.~();\/;?:@&=])/sprintf("%%%02X", ord($1))/eg; $str =~ s/\+/%2B/g; $str =~ s/ /\+/g; @@ -1174,6 +1184,8 @@ sub esc_html { my $str = shift; my %opts = @_; + return undef unless defined $str; + $str = to_utf8($str); $str = $cgi->escapeHTML($str); if ($opts{'-nbsp'}) { @@ -1188,6 +1200,8 @@ sub esc_path { my $str = shift; my %opts = @_; + return undef unless defined $str; + $str = to_utf8($str); $str = $cgi->escapeHTML($str); if ($opts{'-nbsp'}) { @@ -2202,6 +2216,8 @@ sub config_to_multi { sub git_get_project_config { my ($key, $type) = @_; + return unless defined $git_dir; + # key sanity check return unless ($key); $key =~ s/^gitweb\.//; @@ -3372,7 +3388,7 @@ sub git_footer_html { "</html>"; } -# die_error(<http_status_code>, <error_message>) +# die_error(<http_status_code>, <error_message>[, <detailed_html_description>]) # Example: die_error(404, 'Hash not found') # By convention, use the following status codes (as defined in RFC 2616): # 400: Invalid or missing CGI parameters, or @@ -3387,7 +3403,7 @@ sub git_footer_html { # or down for maintenance). Generally, this is a temporary state. sub die_error { my $status = shift || 500; - my $error = shift || "Internal server error"; + my $error = esc_html(shift) || "Internal Server Error"; my $extra = shift; my %http_responses = ( |