summaryrefslogtreecommitdiff
path: root/git-submodule.sh
diff options
context:
space:
mode:
Diffstat (limited to 'git-submodule.sh')
-rwxr-xr-xgit-submodule.sh135
1 files changed, 100 insertions, 35 deletions
diff --git a/git-submodule.sh b/git-submodule.sh
index eb58c8e89d..945e296d30 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -14,10 +14,13 @@ USAGE="[--quiet] add [-b <branch>] [-f|--force] [--name <name>] [--reference <re
or: $dashless [--quiet] foreach [--recursive] <command>
or: $dashless [--quiet] sync [--recursive] [--] [<path>...]"
OPTIONS_SPEC=
+SUBDIRECTORY_OK=Yes
. git-sh-setup
. git-sh-i18n
. git-parse-remote
require_work_tree
+wt_prefix=$(git rev-parse --show-prefix)
+cd_to_toplevel
command=
branch=
@@ -106,12 +109,48 @@ resolve_relative_url ()
echo "${is_relative:+${up_path}}${remoteurl#./}"
}
+# Resolve a path to be relative to another path. This is intended for
+# converting submodule paths when git-submodule is run in a subdirectory
+# and only handles paths where the directory separator is '/'.
+#
+# The output is the first argument as a path relative to the second argument,
+# which defaults to $wt_prefix if it is omitted.
+relative_path ()
+{
+ local target curdir result
+ target=$1
+ curdir=${2-$wt_prefix}
+ curdir=${curdir%/}
+ result=
+
+ while test -n "$curdir"
+ do
+ case "$target" in
+ "$curdir/"*)
+ target=${target#"$curdir"/}
+ break
+ ;;
+ esac
+
+ result="${result}../"
+ if test "$curdir" = "${curdir%/*}"
+ then
+ curdir=
+ else
+ curdir="${curdir%/*}"
+ fi
+ done
+
+ echo "$result$target"
+}
+
#
# Get submodule info for registered submodules
# $@ = path to limit submodule list
#
module_list()
{
+ eval "set $(git rev-parse --sq --prefix "$wt_prefix" -- "$@")"
(
git ls-files -z --error-unmatch --stage -- "$@" ||
echo "unmatched pathspec exists"
@@ -283,6 +322,7 @@ isnumber()
cmd_add()
{
# parse $args after "submodule ... add".
+ reference_path=
while test $# -ne 0
do
case "$1" in
@@ -299,11 +339,11 @@ cmd_add()
;;
--reference)
case "$2" in '') usage ;; esac
- reference="--reference=$2"
+ reference_path=$2
shift
;;
--reference=*)
- reference="$1"
+ reference_path="${1#--reference=}"
;;
--name)
case "$2" in '') usage ;; esac
@@ -324,6 +364,14 @@ cmd_add()
shift
done
+ if test -n "$reference_path"
+ then
+ is_absolute_path "$reference_path" ||
+ reference_path="$wt_prefix$reference_path"
+
+ reference="--reference=$reference_path"
+ fi
+
repo=$1
sm_path=$2
@@ -336,9 +384,14 @@ cmd_add()
usage
fi
+ is_absolute_path "$sm_path" || sm_path="$wt_prefix$sm_path"
+
# assure repo is absolute or relative to parent
case "$repo" in
./*|../*)
+ test -z "$wt_prefix" ||
+ die "$(gettext "Relative path can only be used from the toplevel of the working tree")"
+
# dereference source url relative to parent's url
realrepo=$(resolve_relative_url "$repo") || exit
;;
@@ -472,21 +525,23 @@ cmd_foreach()
die_if_unmatched "$mode"
if test -e "$sm_path"/.git
then
- say "$(eval_gettext "Entering '\$prefix\$sm_path'")"
+ displaypath=$(relative_path "$sm_path")
+ say "$(eval_gettext "Entering '\$prefix\$displaypath'")"
name=$(module_name "$sm_path")
(
prefix="$prefix$sm_path/"
clear_local_git_env
- # we make $path available to scripts ...
- path=$sm_path
cd "$sm_path" &&
+ sm_path=$(relative_path "$sm_path") &&
+ # we make $path available to scripts ...
+ path=$sm_path &&
eval "$@" &&
if test -n "$recursive"
then
cmd_foreach "--recursive" "$@"
fi
) <&3 3<&- ||
- die "$(eval_gettext "Stopping at '\$sm_path'; script returned non-zero status.")"
+ die "$(eval_gettext "Stopping at '\$prefix\$displaypath'; script returned non-zero status.")"
fi
done
}
@@ -525,12 +580,14 @@ cmd_init()
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
+ displaypath=$(relative_path "$sm_path")
+
# Copy url setting when it is not set yet
if test -z "$(git config "submodule.$name.url")"
then
url=$(git config -f .gitmodules submodule."$name".url)
test -z "$url" &&
- die "$(eval_gettext "No url found for submodule path '\$sm_path' in .gitmodules")"
+ die "$(eval_gettext "No url found for submodule path '\$displaypath' in .gitmodules")"
# Possibly a url relative to parent
case "$url" in
@@ -539,9 +596,9 @@ cmd_init()
;;
esac
git config submodule."$name".url "$url" ||
- die "$(eval_gettext "Failed to register url for submodule path '\$sm_path'")"
+ die "$(eval_gettext "Failed to register url for submodule path '\$displaypath'")"
- say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$sm_path'")"
+ say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$displaypath'")"
fi
# Copy "update" setting when it is not set yet
@@ -549,7 +606,7 @@ cmd_init()
test -z "$upd" ||
test -n "$(git config submodule."$name".update)" ||
git config submodule."$name".update "$upd" ||
- die "$(eval_gettext "Failed to register update mode for submodule path '\$sm_path'")"
+ die "$(eval_gettext "Failed to register update mode for submodule path '\$displaypath'")"
done
}
@@ -595,27 +652,29 @@ cmd_deinit()
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
+ displaypath=$(relative_path "$sm_path")
+
# Remove the submodule work tree (unless the user already did it)
if test -d "$sm_path"
then
# Protect submodules containing a .git directory
if test -d "$sm_path/.git"
then
- echo >&2 "$(eval_gettext "Submodule work tree '\$sm_path' contains a .git directory")"
+ echo >&2 "$(eval_gettext "Submodule work tree '\$displaypath' contains a .git directory")"
die "$(eval_gettext "(use 'rm -rf' if you really want to remove it including all of its history)")"
fi
if test -z "$force"
then
git rm -qn "$sm_path" ||
- die "$(eval_gettext "Submodule work tree '\$sm_path' contains local modifications; use '-f' to discard them")"
+ die "$(eval_gettext "Submodule work tree '\$displaypath' contains local modifications; use '-f' to discard them")"
fi
rm -rf "$sm_path" &&
- say "$(eval_gettext "Cleared directory '\$sm_path'")" ||
- say "$(eval_gettext "Could not remove submodule work tree '\$sm_path'")"
+ say "$(eval_gettext "Cleared directory '\$displaypath'")" ||
+ say "$(eval_gettext "Could not remove submodule work tree '\$displaypath'")"
fi
- mkdir "$sm_path" || say "$(eval_gettext "Could not create empty submodule directory '\$sm_path'")"
+ mkdir "$sm_path" || say "$(eval_gettext "Could not create empty submodule directory '\$displaypath'")"
# Remove the .git/config entries (unless the user already did it)
if test -n "$(git config --get-regexp submodule."$name\.")"
@@ -624,7 +683,7 @@ cmd_deinit()
# the user later decides to init this submodule again
url=$(git config submodule."$name".url)
git config --remove-section submodule."$name" 2>/dev/null &&
- say "$(eval_gettext "Submodule '\$name' (\$url) unregistered for path '\$sm_path'")"
+ say "$(eval_gettext "Submodule '\$name' (\$url) unregistered for path '\$displaypath'")"
fi
done
}
@@ -718,9 +777,11 @@ cmd_update()
update_module=$(git config submodule."$name".update)
fi
+ displaypath=$(relative_path "$prefix$sm_path")
+
if test "$update_module" = "none"
then
- echo "Skipping submodule '$prefix$sm_path'"
+ echo "Skipping submodule '$displaypath'"
continue
fi
@@ -729,7 +790,7 @@ cmd_update()
# Only mention uninitialized submodules when its
# path have been specified
test "$#" != "0" &&
- say "$(eval_gettext "Submodule path '\$prefix\$sm_path' not initialized
+ say "$(eval_gettext "Submodule path '\$displaypath' not initialized
Maybe you want to use 'update --init'?")"
continue
fi
@@ -742,7 +803,7 @@ Maybe you want to use 'update --init'?")"
else
subsha1=$(clear_local_git_env; cd "$sm_path" &&
git rev-parse --verify HEAD) ||
- die "$(eval_gettext "Unable to find current revision in submodule path '\$prefix\$sm_path'")"
+ die "$(eval_gettext "Unable to find current revision in submodule path '\$displaypath'")"
fi
if test -n "$remote"
@@ -775,7 +836,7 @@ Maybe you want to use 'update --init'?")"
(clear_local_git_env; cd "$sm_path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
- die "$(eval_gettext "Unable to fetch in submodule path '\$prefix\$sm_path'")"
+ die "$(eval_gettext "Unable to fetch in submodule path '\$displaypath'")"
fi
# Is this something we just cloned?
@@ -789,20 +850,20 @@ Maybe you want to use 'update --init'?")"
case "$update_module" in
rebase)
command="git rebase"
- die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$prefix\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': rebased into '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': rebased into '\$sha1'")"
must_die_on_failure=yes
;;
merge)
command="git merge"
- die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$prefix\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': merged in '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': merged in '\$sha1'")"
must_die_on_failure=yes
;;
*)
command="git checkout $subforce -q"
- die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$prefix\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': checked out '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': checked out '\$sha1'")"
;;
esac
@@ -829,7 +890,7 @@ Maybe you want to use 'update --init'?")"
res=$?
if test $res -gt 0
then
- die_msg="$(eval_gettext "Failed to recurse into submodule path '\$prefix\$sm_path'")"
+ die_msg="$(eval_gettext "Failed to recurse into submodule path '\$displaypath'")"
if test $res -eq 1
then
err="${err};$die_msg"
@@ -943,6 +1004,7 @@ cmd_summary() {
fi
cd_to_toplevel
+ eval "set $(git rev-parse --sq --prefix "$wt_prefix" -- "$@")"
# Get modified modules cared by user
modules=$(git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- "$@" |
sane_egrep '^:([0-7]* )?160000' |
@@ -992,16 +1054,18 @@ cmd_summary() {
! GIT_DIR="$name/.git" git-rev-parse -q --verify $sha1_dst^0 >/dev/null &&
missing_dst=t
+ display_name=$(relative_path "$name")
+
total_commits=
case "$missing_src,$missing_dst" in
t,)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_src")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commit \$sha1_src")"
;;
,t)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_dst")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commit \$sha1_dst")"
;;
t,t)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commits \$sha1_src and \$sha1_dst")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commits \$sha1_src and \$sha1_dst")"
;;
*)
errmsg=
@@ -1030,12 +1094,12 @@ cmd_summary() {
submodule="$(gettext "submodule")"
if test $mod_dst = 160000
then
- echo "* $name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
+ echo "* $display_name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
else
- echo "* $name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
+ echo "* $display_name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
fi
else
- echo "* $name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
+ echo "* $display_name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
fi
if test -n "$errmsg"
then
@@ -1119,7 +1183,7 @@ cmd_status()
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
url=$(git config submodule."$name".url)
- displaypath="$prefix$sm_path"
+ displaypath=$(relative_path "$prefix$sm_path")
if test "$stage" = U
then
say "U$sha1 $displaypath"
@@ -1214,7 +1278,8 @@ cmd_sync()
if git config "submodule.$name.url" >/dev/null 2>/dev/null
then
- say "$(eval_gettext "Synchronizing submodule url for '\$prefix\$sm_path'")"
+ displaypath=$(relative_path "$prefix$sm_path")
+ say "$(eval_gettext "Synchronizing submodule url for '\$displaypath'")"
git config submodule."$name".url "$super_config_url"
if test -e "$sm_path"/.git