diff options
Diffstat (limited to 'git-submodule.sh')
| -rwxr-xr-x | git-submodule.sh | 231 |
1 files changed, 196 insertions, 35 deletions
diff --git a/git-submodule.sh b/git-submodule.sh index 02f82e9ed5..204bc78a9f 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -5,13 +5,14 @@ # Copyright (c) 2007 Lars Hjemli dashless=$(basename "$0" | sed -e 's/-/ /') -USAGE="[--quiet] add [-b <branch>] [-f|--force] [--reference <repository>] [--] <repository> [<path>] +USAGE="[--quiet] add [-b <branch>] [-f|--force] [--name <name>] [--reference <repository>] [--] <repository> [<path>] or: $dashless [--quiet] status [--cached] [--recursive] [--] [<path>...] or: $dashless [--quiet] init [--] [<path>...] - or: $dashless [--quiet] update [--init] [-N|--no-fetch] [-f|--force] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...] + or: $dashless [--quiet] deinit [-f|--force] [--] <path>... + or: $dashless [--quiet] update [--init] [--remote] [-N|--no-fetch] [-f|--force] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...] or: $dashless [--quiet] summary [--cached|--files] [--summary-limit <n>] [commit] [--] [<path>...] or: $dashless [--quiet] foreach [--recursive] <command> - or: $dashless [--quiet] sync [--] [<path>...]" + or: $dashless [--quiet] sync [--recursive] [--] [<path>...]" OPTIONS_SPEC= . git-sh-setup . git-sh-i18n @@ -26,9 +27,11 @@ cached= recursive= init= files= +remote= nofetch= update= prefix= +custom_name= # The function takes at most 2 arguments. The first argument is the # URL that navigates to the submodule origin repo. When relative, this URL @@ -152,6 +155,32 @@ die_if_unmatched () } # +# Print a submodule configuration setting +# +# $1 = submodule name +# $2 = option name +# $3 = default value +# +# Checks in the usual git-config places first (for overrides), +# otherwise it falls back on .gitmodules. This allows you to +# distribute project-wide defaults in .gitmodules, while still +# customizing individual repositories if necessary. If the option is +# not in .gitmodules either, print a default value. +# +get_submodule_config () { + name="$1" + option="$2" + default="$3" + value=$(git config submodule."$name"."$option") + if test -z "$value" + then + value=$(git config -f .gitmodules submodule."$name"."$option") + fi + printf '%s' "${value:-$default}" +} + + +# # Map submodule path to submodule name # # $1 = path @@ -179,8 +208,9 @@ module_name() module_clone() { sm_path=$1 - url=$2 - reference="$3" + name=$2 + url=$3 + reference="$4" quiet= if test -n "$GIT_QUIET" then @@ -189,8 +219,6 @@ module_clone() gitdir= gitdir_base= - name=$(module_name "$sm_path" 2>/dev/null) - test -n "$name" || name="$sm_path" base_name=$(dirname "$name") gitdir=$(git rev-parse --git-dir) @@ -270,6 +298,10 @@ cmd_add() ;; --reference=*) reference="$1" + ;; + --name) + case "$2" in '') usage ;; esac + custom_name=$2 shift ;; --) @@ -336,6 +368,13 @@ Use -f if you really want to add it." >&2 exit 1 fi + if test -n "$custom_name" + then + sm_name="$custom_name" + else + sm_name="$sm_path" + fi + # perhaps the path exists and is already a git repo, else clone it if test -e "$sm_path" then @@ -347,8 +386,21 @@ Use -f if you really want to add it." >&2 fi else - - module_clone "$sm_path" "$realrepo" "$reference" || exit + if test -d ".git/modules/$sm_name" + then + if test -z "$force" + then + echo >&2 "$(eval_gettext "A git directory for '\$sm_name' is found locally with remote(s):")" + GIT_DIR=".git/modules/$sm_name" GIT_WORK_TREE=. git remote -v | grep '(fetch)' | sed -e s,^," ", -e s,' (fetch)',, >&2 + echo >&2 "$(eval_gettext "If you want to reuse this local git directory instead of cloning again from")" + echo >&2 " $realrepo" + echo >&2 "$(eval_gettext "use the '--force' option. If the local git directory is not the correct repo")" + die "$(eval_gettext "or you are unsure what this means choose another name with the '--name' option.")" + else + echo "$(eval_gettext "Reactivating local git directory for submodule '\$sm_name'.")" + fi + fi + module_clone "$sm_path" "$sm_name" "$realrepo" "$reference" || exit ( clear_local_git_env cd "$sm_path" && @@ -359,13 +411,17 @@ Use -f if you really want to add it." >&2 esac ) || die "$(eval_gettext "Unable to checkout submodule '\$sm_path'")" fi - git config submodule."$sm_path".url "$realrepo" + git config submodule."$sm_name".url "$realrepo" git add $force "$sm_path" || die "$(eval_gettext "Failed to add submodule '\$sm_path'")" - git config -f .gitmodules submodule."$sm_path".path "$sm_path" && - git config -f .gitmodules submodule."$sm_path".url "$repo" && + git config -f .gitmodules submodule."$sm_name".path "$sm_path" && + git config -f .gitmodules submodule."$sm_name".url "$repo" && + if test -n "$branch" + then + git config -f .gitmodules submodule."$sm_name".branch "$branch" + fi && git add --force .gitmodules || die "$(eval_gettext "Failed to register submodule '\$sm_path'")" } @@ -492,6 +548,80 @@ cmd_init() } # +# Unregister submodules from .git/config and remove their work tree +# +# $@ = requested paths (use '.' to deinit all submodules) +# +cmd_deinit() +{ + # parse $args after "submodule ... deinit". + while test $# -ne 0 + do + case "$1" in + -f|--force) + force=$1 + ;; + -q|--quiet) + GIT_QUIET=1 + ;; + --) + shift + break + ;; + -*) + usage + ;; + *) + break + ;; + esac + shift + done + + if test $# = 0 + then + die "$(eval_gettext "Use '.' if you really want to deinitialize all submodules")" + fi + + module_list "$@" | + while read mode sha1 stage sm_path + do + die_if_unmatched "$mode" + name=$(module_name "$sm_path") || exit + + # Remove the submodule work tree (unless the user already did it) + if test -d "$sm_path" + then + # Protect submodules containing a .git directory + if test -d "$sm_path/.git" + then + echo >&2 "$(eval_gettext "Submodule work tree '\$sm_path' contains a .git directory")" + die "$(eval_gettext "(use 'rm -rf' if you really want to remove it including all of its history)")" + fi + + if test -z "$force" + then + git rm -n "$sm_path" || + die "$(eval_gettext "Submodule work tree '\$sm_path' contains local modifications; use '-f' to discard them")" + fi + rm -rf "$sm_path" || say "$(eval_gettext "Could not remove submodule work tree '\$sm_path'")" + fi + + mkdir "$sm_path" || say "$(eval_gettext "Could not create empty submodule directory '\$sm_path'")" + + # Remove the .git/config entries (unless the user already did it) + if test -n "$(git config --get-regexp submodule."$name\.")" + then + # Remove the whole section so we have a clean state when + # the user later decides to init this submodule again + url=$(git config submodule."$name".url) + git config --remove-section submodule."$name" 2>/dev/null && + say "$(eval_gettext "Submodule '\$name' (\$url) unregistered for path '\$sm_path'")" + fi + done +} + +# # Update each submodule path to correct revision, using clone and checkout as needed # # $@ = requested paths (default to all) @@ -509,6 +639,9 @@ cmd_update() -i|--init) init=1 ;; + --remote) + remote=1 + ;; -N|--no-fetch) nofetch=1 ;; @@ -564,11 +697,12 @@ cmd_update() die_if_unmatched "$mode" if test "$stage" = U then - echo >&2 "Skipping unmerged submodule $sm_path" + echo >&2 "Skipping unmerged submodule $prefix$sm_path" continue fi name=$(module_name "$sm_path") || exit url=$(git config submodule."$name".url) + branch=$(get_submodule_config "$name" branch master) if ! test -z "$update" then update_module=$update @@ -578,7 +712,7 @@ cmd_update() if test "$update_module" = "none" then - echo "Skipping submodule '$sm_path'" + echo "Skipping submodule '$prefix$sm_path'" continue fi @@ -587,20 +721,34 @@ cmd_update() # Only mention uninitialized submodules when its # path have been specified test "$#" != "0" && - say "$(eval_gettext "Submodule path '\$sm_path' not initialized + say "$(eval_gettext "Submodule path '\$prefix\$sm_path' not initialized Maybe you want to use 'update --init'?")" continue fi if ! test -d "$sm_path"/.git -o -f "$sm_path"/.git then - module_clone "$sm_path" "$url" "$reference"|| exit + module_clone "$sm_path" "$name" "$url" "$reference" || exit cloned_modules="$cloned_modules;$name" subsha1= else subsha1=$(clear_local_git_env; cd "$sm_path" && git rev-parse --verify HEAD) || - die "$(eval_gettext "Unable to find current revision in submodule path '\$sm_path'")" + die "$(eval_gettext "Unable to find current revision in submodule path '\$prefix\$sm_path'")" + fi + + if test -n "$remote" + then + if test -z "$nofetch" + then + # Fetch remote before determining tracking $sha1 + (clear_local_git_env; cd "$sm_path" && git-fetch) || + die "$(eval_gettext "Unable to fetch in submodule path '\$sm_path'")" + fi + remote_name=$(clear_local_git_env; cd "$sm_path" && get_default_remote) + sha1=$(clear_local_git_env; cd "$sm_path" && + git rev-parse --verify "${remote_name}/${branch}") || + die "$(eval_gettext "Unable to find current ${remote_name}/${branch} revision in submodule path '\$sm_path'")" fi if test "$subsha1" != "$sha1" -o -n "$force" @@ -619,7 +767,7 @@ Maybe you want to use 'update --init'?")" (clear_local_git_env; cd "$sm_path" && ( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) && test -z "$rev") || git-fetch)) || - die "$(eval_gettext "Unable to fetch in submodule path '\$sm_path'")" + die "$(eval_gettext "Unable to fetch in submodule path '\$prefix\$sm_path'")" fi # Is this something we just cloned? @@ -633,20 +781,20 @@ Maybe you want to use 'update --init'?")" case "$update_module" in rebase) command="git rebase" - die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$sm_path'")" - say_msg="$(eval_gettext "Submodule path '\$sm_path': rebased into '\$sha1'")" + die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$prefix\$sm_path'")" + say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': rebased into '\$sha1'")" must_die_on_failure=yes ;; merge) command="git merge" - die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$sm_path'")" - say_msg="$(eval_gettext "Submodule path '\$sm_path': merged in '\$sha1'")" + die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$prefix\$sm_path'")" + say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': merged in '\$sha1'")" must_die_on_failure=yes ;; *) command="git checkout $subforce -q" - die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$sm_path'")" - say_msg="$(eval_gettext "Submodule path '\$sm_path': checked out '\$sha1'")" + die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$prefix\$sm_path'")" + say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': checked out '\$sha1'")" ;; esac @@ -664,11 +812,16 @@ Maybe you want to use 'update --init'?")" if test -n "$recursive" then - (clear_local_git_env; cd "$sm_path" && eval cmd_update "$orig_flags") + ( + prefix="$prefix$sm_path/" + clear_local_git_env + cd "$sm_path" && + eval cmd_update "$orig_flags" + ) res=$? if test $res -gt 0 then - die_msg="$(eval_gettext "Failed to recurse into submodule path '\$sm_path'")" + die_msg="$(eval_gettext "Failed to recurse into submodule path '\$prefix\$sm_path'")" if test $res -eq 1 then err="${err};$die_msg" @@ -903,12 +1056,12 @@ cmd_summary() { done | if test -n "$for_status"; then if [ -n "$files" ]; then - gettextln "# Submodules changed but not updated:" + gettextln "Submodules changed but not updated:" | git stripspace -c else - gettextln "# Submodule changes to be committed:" + gettextln "Submodule changes to be committed:" | git stripspace -c fi - echo "#" - sed -e 's|^|# |' -e 's|^# $|#|' + printf "\n" | git stripspace -c + git stripspace -c else cat fi @@ -926,7 +1079,6 @@ cmd_summary() { cmd_status() { # parse $args after "submodule ... status". - orig_flags= while test $# -ne 0 do case "$1" in @@ -950,7 +1102,6 @@ cmd_status() break ;; esac - orig_flags="$orig_flags $(git rev-parse --sq-quote "$1")" shift done @@ -990,7 +1141,7 @@ cmd_status() prefix="$displaypath/" clear_local_git_env cd "$sm_path" && - eval cmd_status "$orig_args" + eval cmd_status ) || die "$(eval_gettext "Failed to recurse into submodule path '\$sm_path'")" fi @@ -1010,6 +1161,10 @@ cmd_sync() GIT_QUIET=1 shift ;; + --recursive) + recursive=1 + shift + ;; --) shift break @@ -1051,7 +1206,7 @@ cmd_sync() if git config "submodule.$name.url" >/dev/null 2>/dev/null then - say "$(eval_gettext "Synchronizing submodule url for '\$name'")" + say "$(eval_gettext "Synchronizing submodule url for '\$prefix\$sm_path'")" git config submodule."$name".url "$super_config_url" if test -e "$sm_path"/.git @@ -1061,6 +1216,12 @@ cmd_sync() cd "$sm_path" remote=$(get_default_remote) git config remote."$remote".url "$sub_origin_url" + + if test -n "$recursive" + then + prefix="$prefix$sm_path/" + eval cmd_sync + fi ) fi fi @@ -1076,7 +1237,7 @@ cmd_sync() while test $# != 0 && test -z "$command" do case "$1" in - add | foreach | init | update | status | summary | sync) + add | foreach | init | deinit | update | status | summary | sync) command=$1 ;; -q|--quiet) |