summaryrefslogtreecommitdiff
path: root/git-submodule.sh
diff options
context:
space:
mode:
Diffstat (limited to 'git-submodule.sh')
-rwxr-xr-xgit-submodule.sh207
1 files changed, 127 insertions, 80 deletions
diff --git a/git-submodule.sh b/git-submodule.sh
index d189a24c71..bc1d3fa663 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -14,6 +14,7 @@ USAGE="[--quiet] add [-b branch] [-f|--force] [--reference <repository>] [--] <r
or: $dashless [--quiet] sync [--] [<path>...]"
OPTIONS_SPEC=
. git-sh-setup
+. git-sh-i18n
. git-parse-remote
require_work_tree
@@ -34,7 +35,7 @@ resolve_relative_url ()
{
remote=$(get_default_remote)
remoteurl=$(git config "remote.$remote.url") ||
- die "remote ($remote) does not have a url defined in .git/config"
+ remoteurl=$(pwd) # the repository is its own authoritative upstream
url="$1"
remoteurl=${remoteurl%/}
sep=/
@@ -52,7 +53,7 @@ resolve_relative_url ()
sep=:
;;
*)
- die "cannot strip one component off url '$remoteurl'"
+ die "$(eval_gettext "cannot strip one component off url '\$remoteurl'")"
;;
esac
;;
@@ -104,7 +105,7 @@ module_name()
name=$( git config -f .gitmodules --get-regexp '^submodule\..*\.path$' |
sed -n -e 's|^submodule\.\(.*\)\.path '"$re"'$|\1|p' )
test -z "$name" &&
- die "No submodule mapping found in .gitmodules for path '$path'"
+ die "$(eval_gettext "No submodule mapping found in .gitmodules for path '\$path'")"
echo "$name"
}
@@ -128,7 +129,7 @@ module_clone()
else
git-clone -n "$url" "$path"
fi ||
- die "Clone of '$url' into submodule path '$path' failed"
+ die "$(eval_gettext "Clone of '\$url' into submodule path '\$path' failed")"
}
#
@@ -201,7 +202,7 @@ cmd_add()
realrepo=$repo
;;
*)
- die "repo URL: '$repo' must be absolute or begin with ./|../"
+ die "$(eval_gettext "repo URL: '\$repo' must be absolute or begin with ./|../")"
;;
esac
@@ -218,13 +219,16 @@ cmd_add()
s|/*$||
')
git ls-files --error-unmatch "$path" > /dev/null 2>&1 &&
- die "'$path' already exists in the index"
+ die "$(eval_gettext "'\$path' already exists in the index")"
if test -z "$force" && ! git add --dry-run --ignore-missing "$path" > /dev/null 2>&1
then
- echo >&2 "The following path is ignored by one of your .gitignore files:" &&
- echo >&2 $path &&
- echo >&2 "Use -f if you really want to add it."
+ (
+ eval_gettext "The following path is ignored by one of your .gitignore files:
+\$path
+Use -f if you really want to add it." &&
+ echo
+ ) >&2
exit 1
fi
@@ -233,20 +237,11 @@ cmd_add()
then
if test -d "$path"/.git -o -f "$path"/.git
then
- echo "Adding existing repo at '$path' to the index"
+ eval_gettext "Adding existing repo at '\$path' to the index"; echo
else
- die "'$path' already exists and is not a valid git repo"
+ die "$(eval_gettext "'\$path' already exists and is not a valid git repo")"
fi
- case "$repo" in
- ./*|../*)
- url=$(resolve_relative_url "$repo") || exit
- ;;
- *)
- url="$repo"
- ;;
- esac
- git config submodule."$path".url "$url"
else
module_clone "$path" "$realrepo" "$reference" || exit
@@ -258,16 +253,17 @@ cmd_add()
'') git checkout -f -q ;;
?*) git checkout -f -q -B "$branch" "origin/$branch" ;;
esac
- ) || die "Unable to checkout submodule '$path'"
+ ) || die "$(eval_gettext "Unable to checkout submodule '\$path'")"
fi
+ git config submodule."$path".url "$realrepo"
git add $force "$path" ||
- die "Failed to add submodule '$path'"
+ die "$(eval_gettext "Failed to add submodule '\$path'")"
git config -f .gitmodules submodule."$path".path "$path" &&
git config -f .gitmodules submodule."$path".url "$repo" &&
git add --force .gitmodules ||
- die "Failed to register submodule '$path'"
+ die "$(eval_gettext "Failed to register submodule '\$path'")"
}
#
@@ -300,12 +296,16 @@ cmd_foreach()
toplevel=$(pwd)
+ # dup stdin so that it can be restored when running the external
+ # command in the subshell (and a recursive call to this function)
+ exec 3<&0
+
module_list |
while read mode sha1 stage path
do
if test -e "$path"/.git
then
- say "Entering '$prefix$path'"
+ say "$(eval_gettext "Entering '\$prefix\$path'")"
name=$(module_name "$path")
(
prefix="$prefix$path/"
@@ -316,8 +316,8 @@ cmd_foreach()
then
cmd_foreach "--recursive" "$@"
fi
- ) ||
- die "Stopping at '$path'; script returned non-zero status."
+ ) <&3 3<&- ||
+ die "$(eval_gettext "Stopping at '\$path'; script returned non-zero status.")"
fi
done
}
@@ -355,29 +355,30 @@ cmd_init()
do
# Skip already registered paths
name=$(module_name "$path") || exit
- url=$(git config submodule."$name".url)
- test -z "$url" || continue
-
- url=$(git config -f .gitmodules submodule."$name".url)
- test -z "$url" &&
- die "No url found for submodule path '$path' in .gitmodules"
-
- # Possibly a url relative to parent
- case "$url" in
- ./*|../*)
- url=$(resolve_relative_url "$url") || exit
- ;;
- esac
-
- git config submodule."$name".url "$url" ||
- die "Failed to register url for submodule path '$path'"
+ if test -z "$(git config "submodule.$name.url")"
+ then
+ url=$(git config -f .gitmodules submodule."$name".url)
+ test -z "$url" &&
+ die "$(eval_gettext "No url found for submodule path '\$path' in .gitmodules")"
+
+ # Possibly a url relative to parent
+ case "$url" in
+ ./*|../*)
+ url=$(resolve_relative_url "$url") || exit
+ ;;
+ esac
+ git config submodule."$name".url "$url" ||
+ die "$(eval_gettext "Failed to register url for submodule path '\$path'")"
+ fi
+ # Copy "update" setting when it is not set yet
upd="$(git config -f .gitmodules submodule."$name".update)"
test -z "$upd" ||
+ test -n "$(git config submodule."$name".update)" ||
git config submodule."$name".update "$upd" ||
- die "Failed to register update mode for submodule path '$path'"
+ die "$(eval_gettext "Failed to register update mode for submodule path '\$path'")"
- say "Submodule '$name' ($url) registered for path '$path'"
+ say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$path'")"
done
}
@@ -444,7 +445,8 @@ cmd_update()
fi
cloned_modules=
- module_list "$@" |
+ module_list "$@" | {
+ err=
while read mode sha1 stage path
do
if test "$stage" = U
@@ -460,8 +462,8 @@ cmd_update()
# Only mention uninitialized submodules when its
# path have been specified
test "$#" != "0" &&
- say "Submodule path '$path' not initialized" &&
- say "Maybe you want to use 'update --init'?"
+ say "$(eval_gettext "Submodule path '\$path' not initialized
+Maybe you want to use 'update --init'?")"
continue
fi
@@ -473,7 +475,7 @@ cmd_update()
else
subsha1=$(clear_local_git_env; cd "$path" &&
git rev-parse --verify HEAD) ||
- die "Unable to find current revision in submodule path '$path'"
+ die "$(eval_gettext "Unable to find current revision in submodule path '\$path'")"
fi
if ! test -z "$update"
@@ -497,7 +499,7 @@ cmd_update()
(clear_local_git_env; cd "$path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
- die "Unable to fetch in submodule path '$path'"
+ die "$(eval_gettext "Unable to fetch in submodule path '\$path'")"
fi
# Is this something we just cloned?
@@ -507,35 +509,72 @@ cmd_update()
update_module= ;;
esac
+ must_die_on_failure=
case "$update_module" in
rebase)
command="git rebase"
- action="rebase"
- msg="rebased onto"
+ die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$path'")"
+ say_msg="$(eval_gettext "Submodule path '\$path': rebased into '\$sha1'")"
+ must_die_on_failure=yes
;;
merge)
command="git merge"
- action="merge"
- msg="merged in"
+ die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$path'")"
+ say_msg="$(eval_gettext "Submodule path '\$path': merged in '\$sha1'")"
+ must_die_on_failure=yes
;;
*)
command="git checkout $subforce -q"
- action="checkout"
- msg="checked out"
+ die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$path'")"
+ say_msg="$(eval_gettext "Submodule path '\$path': checked out '\$sha1'")"
;;
esac
- (clear_local_git_env; cd "$path" && $command "$sha1") ||
- die "Unable to $action '$sha1' in submodule path '$path'"
- say "Submodule path '$path': $msg '$sha1'"
+ if (clear_local_git_env; cd "$path" && $command "$sha1")
+ then
+ say "$say_msg"
+ elif test -n "$must_die_on_failure"
+ then
+ die_with_status 2 "$die_msg"
+ else
+ err="${err};$die_msg"
+ continue
+ fi
fi
if test -n "$recursive"
then
- (clear_local_git_env; cd "$path" && eval cmd_update "$orig_flags") ||
- die "Failed to recurse into submodule path '$path'"
+ (clear_local_git_env; cd "$path" && eval cmd_update "$orig_flags")
+ res=$?
+ if test $res -gt 0
+ then
+ die_msg="$(eval_gettext "Failed to recurse into submodule path '\$path'")"
+ if test $res -eq 1
+ then
+ err="${err};$die_msg"
+ continue
+ else
+ die_with_status $res "$die_msg"
+ fi
+ fi
fi
done
+
+ if test -n "$err"
+ then
+ OIFS=$IFS
+ IFS=';'
+ for e in $err
+ do
+ if test -n "$e"
+ then
+ echo >&2 "$e"
+ fi
+ done
+ IFS=$OIFS
+ exit 1
+ fi
+ }
}
set_name_rev () {
@@ -617,7 +656,7 @@ cmd_summary() {
if [ -n "$files" ]
then
test -n "$cached" &&
- die "--cached cannot be used with --files"
+ die "$(gettext -- "--cached cannot be used with --files")"
diff_cmd=diff-files
head=
fi
@@ -657,7 +696,10 @@ cmd_summary() {
;; # removed
*)
# unexpected type
- echo >&2 "unexpected mode $mod_dst"
+ (
+ eval_gettext "unexpected mode \$mod_dst" &&
+ echo
+ ) >&2
continue ;;
esac
fi
@@ -675,13 +717,13 @@ cmd_summary() {
total_commits=
case "$missing_src,$missing_dst" in
t,)
- errmsg=" Warn: $name doesn't contain commit $sha1_src"
+ errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_src")"
;;
,t)
- errmsg=" Warn: $name doesn't contain commit $sha1_dst"
+ errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_dst")"
;;
t,t)
- errmsg=" Warn: $name doesn't contain commits $sha1_src and $sha1_dst"
+ errmsg="$(eval_gettext " Warn: \$name doesn't contain commits \$sha1_src and \$sha1_dst")"
;;
*)
errmsg=
@@ -706,11 +748,13 @@ cmd_summary() {
sha1_abbr_dst=$(echo $sha1_dst | cut -c1-7)
if test $status = T
then
+ blob="$(gettext "blob")"
+ submodule="$(gettext "submodule")"
if test $mod_dst = 160000
then
- echo "* $name $sha1_abbr_src(blob)->$sha1_abbr_dst(submodule)$total_commits:"
+ echo "* $name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
else
- echo "* $name $sha1_abbr_src(submodule)->$sha1_abbr_dst(blob)$total_commits:"
+ echo "* $name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
fi
else
echo "* $name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
@@ -742,9 +786,9 @@ cmd_summary() {
done |
if test -n "$for_status"; then
if [ -n "$files" ]; then
- echo "# Submodules changed but not updated:"
+ gettext "# Submodules changed but not updated:"; echo
else
- echo "# Submodule changes to be committed:"
+ gettext "# Submodule changes to be committed:"; echo
fi
echo "#"
sed -e 's|^|# |' -e 's|^# $|#|'
@@ -830,7 +874,7 @@ cmd_status()
cd "$path" &&
eval cmd_status "$orig_args"
) ||
- die "Failed to recurse into submodule path '$path'"
+ die "$(eval_gettext "Failed to recurse into submodule path '\$path'")"
fi
done
}
@@ -874,17 +918,20 @@ cmd_sync()
;;
esac
- say "Synchronizing submodule url for '$name'"
- git config submodule."$name".url "$url"
-
- if test -e "$path"/.git
+ if git config "submodule.$name.url" >/dev/null 2>/dev/null
then
- (
- clear_local_git_env
- cd "$path"
- remote=$(get_default_remote)
- git config remote."$remote".url "$url"
- )
+ say "$(eval_gettext "Synchronizing submodule url for '\$name'")"
+ git config submodule."$name".url "$url"
+
+ if test -e "$path"/.git
+ then
+ (
+ clear_local_git_env
+ cd "$path"
+ remote=$(get_default_remote)
+ git config remote."$remote".url "$url"
+ )
+ fi
fi
done
}