diff options
Diffstat (limited to 'git-submodule.sh')
| -rwxr-xr-x | git-submodule.sh | 205 |
1 files changed, 147 insertions, 58 deletions
diff --git a/git-submodule.sh b/git-submodule.sh index c94218b877..3d94a14079 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -14,6 +14,7 @@ USAGE="[--quiet] add [-b branch] [-f|--force] [--reference <repository>] [--] <r or: $dashless [--quiet] sync [--] [<path>...]" OPTIONS_SPEC= . git-sh-setup +. git-sh-i18n . git-parse-remote require_work_tree @@ -52,7 +53,7 @@ resolve_relative_url () sep=: ;; *) - die "cannot strip one component off url '$remoteurl'" + die "$(eval_gettext "cannot strip one component off url '\$remoteurl'")" ;; esac ;; @@ -103,9 +104,9 @@ module_name() re=$(printf '%s\n' "$1" | sed -e 's/[].[^$\\*]/\\&/g') name=$( git config -f .gitmodules --get-regexp '^submodule\..*\.path$' | sed -n -e 's|^submodule\.\(.*\)\.path '"$re"'$|\1|p' ) - test -z "$name" && - die "No submodule mapping found in .gitmodules for path '$path'" - echo "$name" + test -z "$name" && + die "$(eval_gettext "No submodule mapping found in .gitmodules for path '\$path'")" + echo "$name" } # @@ -127,13 +128,51 @@ module_clone() quiet=-q fi - if test -n "$reference" + gitdir= + gitdir_base= + name=$(module_name "$path" 2>/dev/null) + test -n "$name" || name="$path" + base_name=$(dirname "$name") + + gitdir=$(git rev-parse --git-dir) + gitdir_base="$gitdir/modules/$base_name" + gitdir="$gitdir/modules/$name" + + if test -d "$gitdir" then - git-clone $quiet "$reference" -n "$url" "$path" + mkdir -p "$path" + rm -f "$gitdir/index" else - git-clone $quiet -n "$url" "$path" - fi || - die "Clone of '$url' into submodule path '$path' failed" + mkdir -p "$gitdir_base" + git clone $quiet -n ${reference:+"$reference"} \ + --separate-git-dir "$gitdir" "$url" "$path" || + die "$(eval_gettext "Clone of '\$url' into submodule path '\$path' failed")" + fi + + a=$(cd "$gitdir" && pwd)/ + b=$(cd "$path" && pwd)/ + # normalize Windows-style absolute paths to POSIX-style absolute paths + case $a in [a-zA-Z]:/*) a=/${a%%:*}${a#*:} ;; esac + case $b in [a-zA-Z]:/*) b=/${b%%:*}${b#*:} ;; esac + # Remove all common leading directories after a sanity check + if test "${a#$b}" != "$a" || test "${b#$a}" != "$b"; then + die "$(eval_gettext "Gitdir '\$a' is part of the submodule path '\$b' or vice versa")" + fi + while test "${a%%/*}" = "${b%%/*}" + do + a=${a#*/} + b=${b#*/} + done + # Now chop off the trailing '/'s that were added in the beginning + a=${a%/} + b=${b%/} + + # Turn each leading "*/" component into "../" + rel=$(echo $b | sed -e 's|[^/][^/]*|..|g') + echo "gitdir: $rel/$a" >"$path/.git" + + rel=$(echo $a | sed -e 's|[^/][^/]*|..|g') + (clear_local_git_env; cd "$path" && GIT_WORK_TREE=. git config core.worktree "$rel/$b") } # @@ -206,7 +245,7 @@ cmd_add() realrepo=$repo ;; *) - die "repo URL: '$repo' must be absolute or begin with ./|../" + die "$(eval_gettext "repo URL: '\$repo' must be absolute or begin with ./|../")" ;; esac @@ -223,13 +262,13 @@ cmd_add() s|/*$|| ') git ls-files --error-unmatch "$path" > /dev/null 2>&1 && - die "'$path' already exists in the index" + die "$(eval_gettext "'\$path' already exists in the index")" if test -z "$force" && ! git add --dry-run --ignore-missing "$path" > /dev/null 2>&1 then - echo >&2 "The following path is ignored by one of your .gitignore files:" && - echo >&2 $path && - echo >&2 "Use -f if you really want to add it." + eval_gettextln "The following path is ignored by one of your .gitignore files: +\$path +Use -f if you really want to add it." >&2 exit 1 fi @@ -238,9 +277,9 @@ cmd_add() then if test -d "$path"/.git -o -f "$path"/.git then - echo "Adding existing repo at '$path' to the index" + eval_gettextln "Adding existing repo at '\$path' to the index" else - die "'$path' already exists and is not a valid git repo" + die "$(eval_gettext "'\$path' already exists and is not a valid git repo")" fi else @@ -254,17 +293,17 @@ cmd_add() '') git checkout -f -q ;; ?*) git checkout -f -q -B "$branch" "origin/$branch" ;; esac - ) || die "Unable to checkout submodule '$path'" + ) || die "$(eval_gettext "Unable to checkout submodule '\$path'")" fi git config submodule."$path".url "$realrepo" git add $force "$path" || - die "Failed to add submodule '$path'" + die "$(eval_gettext "Failed to add submodule '\$path'")" git config -f .gitmodules submodule."$path".path "$path" && git config -f .gitmodules submodule."$path".url "$repo" && git add --force .gitmodules || - die "Failed to register submodule '$path'" + die "$(eval_gettext "Failed to register submodule '\$path'")" } # @@ -306,7 +345,7 @@ cmd_foreach() do if test -e "$path"/.git then - say "Entering '$prefix$path'" + say "$(eval_gettext "Entering '\$prefix\$path'")" name=$(module_name "$path") ( prefix="$prefix$path/" @@ -318,7 +357,7 @@ cmd_foreach() cmd_foreach "--recursive" "$@" fi ) <&3 3<&- || - die "Stopping at '$path'; script returned non-zero status." + die "$(eval_gettext "Stopping at '\$path'; script returned non-zero status.")" fi done } @@ -360,7 +399,7 @@ cmd_init() then url=$(git config -f .gitmodules submodule."$name".url) test -z "$url" && - die "No url found for submodule path '$path' in .gitmodules" + die "$(eval_gettext "No url found for submodule path '\$path' in .gitmodules")" # Possibly a url relative to parent case "$url" in @@ -369,7 +408,7 @@ cmd_init() ;; esac git config submodule."$name".url "$url" || - die "Failed to register url for submodule path '$path'" + die "$(eval_gettext "Failed to register url for submodule path '\$path'")" fi # Copy "update" setting when it is not set yet @@ -377,9 +416,9 @@ cmd_init() test -z "$upd" || test -n "$(git config submodule."$name".update)" || git config submodule."$name".update "$upd" || - die "Failed to register update mode for submodule path '$path'" + die "$(eval_gettext "Failed to register update mode for submodule path '\$path'")" - say "Submodule '$name' ($url) registered for path '$path'" + say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$path'")" done } @@ -425,6 +464,9 @@ cmd_update() --recursive) recursive=1 ;; + --checkout) + update="checkout" + ;; --) shift break @@ -446,7 +488,8 @@ cmd_update() fi cloned_modules= - module_list "$@" | + module_list "$@" | { + err= while read mode sha1 stage path do if test "$stage" = U @@ -456,14 +499,26 @@ cmd_update() fi name=$(module_name "$path") || exit url=$(git config submodule."$name".url) - update_module=$(git config submodule."$name".update) + if ! test -z "$update" + then + update_module=$update + else + update_module=$(git config submodule."$name".update) + fi + + if test "$update_module" = "none" + then + echo "Skipping submodule '$path'" + continue + fi + if test -z "$url" then # Only mention uninitialized submodules when its # path have been specified test "$#" != "0" && - say "Submodule path '$path' not initialized" && - say "Maybe you want to use 'update --init'?" + say "$(eval_gettext "Submodule path '\$path' not initialized +Maybe you want to use 'update --init'?")" continue fi @@ -475,12 +530,7 @@ cmd_update() else subsha1=$(clear_local_git_env; cd "$path" && git rev-parse --verify HEAD) || - die "Unable to find current revision in submodule path '$path'" - fi - - if ! test -z "$update" - then - update_module=$update + die "$(eval_gettext "Unable to find current revision in submodule path '\$path'")" fi if test "$subsha1" != "$sha1" @@ -499,7 +549,7 @@ cmd_update() (clear_local_git_env; cd "$path" && ( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) && test -z "$rev") || git-fetch)) || - die "Unable to fetch in submodule path '$path'" + die "$(eval_gettext "Unable to fetch in submodule path '\$path'")" fi # Is this something we just cloned? @@ -509,35 +559,72 @@ cmd_update() update_module= ;; esac + must_die_on_failure= case "$update_module" in rebase) command="git rebase" - action="rebase" - msg="rebased onto" + die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$path'")" + say_msg="$(eval_gettext "Submodule path '\$path': rebased into '\$sha1'")" + must_die_on_failure=yes ;; merge) command="git merge" - action="merge" - msg="merged in" + die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$path'")" + say_msg="$(eval_gettext "Submodule path '\$path': merged in '\$sha1'")" + must_die_on_failure=yes ;; *) command="git checkout $subforce -q" - action="checkout" - msg="checked out" + die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$path'")" + say_msg="$(eval_gettext "Submodule path '\$path': checked out '\$sha1'")" ;; esac - (clear_local_git_env; cd "$path" && $command "$sha1") || - die "Unable to $action '$sha1' in submodule path '$path'" - say "Submodule path '$path': $msg '$sha1'" + if (clear_local_git_env; cd "$path" && $command "$sha1") + then + say "$say_msg" + elif test -n "$must_die_on_failure" + then + die_with_status 2 "$die_msg" + else + err="${err};$die_msg" + continue + fi fi if test -n "$recursive" then - (clear_local_git_env; cd "$path" && eval cmd_update "$orig_flags") || - die "Failed to recurse into submodule path '$path'" + (clear_local_git_env; cd "$path" && eval cmd_update "$orig_flags") + res=$? + if test $res -gt 0 + then + die_msg="$(eval_gettext "Failed to recurse into submodule path '\$path'")" + if test $res -eq 1 + then + err="${err};$die_msg" + continue + else + die_with_status $res "$die_msg" + fi + fi fi done + + if test -n "$err" + then + OIFS=$IFS + IFS=';' + for e in $err + do + if test -n "$e" + then + echo >&2 "$e" + fi + done + IFS=$OIFS + exit 1 + fi + } } set_name_rev () { @@ -619,7 +706,7 @@ cmd_summary() { if [ -n "$files" ] then test -n "$cached" && - die "--cached cannot be used with --files" + die "$(gettext -- "--cached cannot be used with --files")" diff_cmd=diff-files head= fi @@ -659,7 +746,7 @@ cmd_summary() { ;; # removed *) # unexpected type - echo >&2 "unexpected mode $mod_dst" + eval_gettextln "unexpected mode \$mod_dst" >&2 continue ;; esac fi @@ -677,13 +764,13 @@ cmd_summary() { total_commits= case "$missing_src,$missing_dst" in t,) - errmsg=" Warn: $name doesn't contain commit $sha1_src" + errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_src")" ;; ,t) - errmsg=" Warn: $name doesn't contain commit $sha1_dst" + errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_dst")" ;; t,t) - errmsg=" Warn: $name doesn't contain commits $sha1_src and $sha1_dst" + errmsg="$(eval_gettext " Warn: \$name doesn't contain commits \$sha1_src and \$sha1_dst")" ;; *) errmsg= @@ -708,11 +795,13 @@ cmd_summary() { sha1_abbr_dst=$(echo $sha1_dst | cut -c1-7) if test $status = T then + blob="$(gettext "blob")" + submodule="$(gettext "submodule")" if test $mod_dst = 160000 then - echo "* $name $sha1_abbr_src(blob)->$sha1_abbr_dst(submodule)$total_commits:" + echo "* $name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:" else - echo "* $name $sha1_abbr_src(submodule)->$sha1_abbr_dst(blob)$total_commits:" + echo "* $name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:" fi else echo "* $name $sha1_abbr_src...$sha1_abbr_dst$total_commits:" @@ -744,9 +833,9 @@ cmd_summary() { done | if test -n "$for_status"; then if [ -n "$files" ]; then - echo "# Submodules changed but not updated:" + gettextln "# Submodules changed but not updated:" else - echo "# Submodule changes to be committed:" + gettextln "# Submodule changes to be committed:" fi echo "#" sed -e 's|^|# |' -e 's|^# $|#|' @@ -832,7 +921,7 @@ cmd_status() cd "$path" && eval cmd_status "$orig_args" ) || - die "Failed to recurse into submodule path '$path'" + die "$(eval_gettext "Failed to recurse into submodule path '\$path'")" fi done } @@ -878,7 +967,7 @@ cmd_sync() if git config "submodule.$name.url" >/dev/null 2>/dev/null then - say "Synchronizing submodule url for '$name'" + say "$(eval_gettext "Synchronizing submodule url for '\$name'")" git config submodule."$name".url "$url" if test -e "$path"/.git |