diff options
Diffstat (limited to 'git-send-email.perl')
| -rwxr-xr-x | git-send-email.perl | 151 |
1 files changed, 97 insertions, 54 deletions
diff --git a/git-send-email.perl b/git-send-email.perl index 7c0c90bd21..f1a8855682 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -21,8 +21,11 @@ use warnings; use Term::ReadLine; use Getopt::Long; use Data::Dumper; +use Term::ANSIColor; use Git; +$SIG{INT} = sub { print color("reset"), "\n"; exit }; + package FakeTerm; sub new { my ($class, $reason) = @_; @@ -49,8 +52,8 @@ Options: --bcc Specify a list of email addresses that should be Bcc: on all the emails. - --compose Use \$EDITOR to edit an introductory message for the - patch series. + --compose Use \$GIT_EDITOR, core.editor, \$EDITOR, or \$VISUAL to edit + an introductory message for the patch series. --subject Specify the initial "Subject:" line. Only necessary if --compose is also set. If --compose @@ -64,15 +67,17 @@ Options: email sent, rather than to the first email sent. Defaults to on. - --no-signed-off-cc Suppress the automatic addition of email addresses - that appear in Signed-off-by: or Cc: lines to the cc: - list. Note: Using this option is not recommended. + --signed-off-cc Automatically add email addresses that appear in + Signed-off-by: or Cc: lines to the cc: list. Defaults to on. --smtp-server If set, specifies the outgoing SMTP server to use. Defaults to localhost. --suppress-from Suppress sending emails to yourself if your address - appears in a From: line. + appears in a From: line. Defaults to off. + + --thread Specify that the "In-Reply-To:" header should be set on all + emails. Defaults to on. --quiet Make git-send-email less verbose. One line per email should be all that is output. @@ -135,11 +140,8 @@ my $compose_filename = ".msg.$$"; # Variables we fill in automatically, or via prompting: my (@to,@cc,@initial_cc,@bcclist,@xh, - $initial_reply_to,$initial_subject,@files,$from,$compose,$time); + $initial_reply_to,$initial_subject,@files,$author,$sender,$compose,$time); -# Behavior modification variables -my ($chain_reply_to, $quiet, $suppress_from, $no_signed_off_cc, - $dry_run) = (1, 0, 0, 0, 0); my $smtp_server; my $envelope_sender; @@ -154,9 +156,22 @@ if ($@) { $term = new FakeTerm "$@: going non-interactive"; } -my $def_chain = $repo->config_bool('sendemail.chainreplyto'); -if (defined $def_chain and not $def_chain) { - $chain_reply_to = 0; +# Behavior modification variables +my ($quiet, $dry_run) = (0, 0); + +# Variables with corresponding config settings +my ($thread, $chain_reply_to, $suppress_from, $signed_off_cc); + +my %config_settings = ( + "thread" => [\$thread, 1], + "chainreplyto" => [\$chain_reply_to, 1], + "suppressfrom" => [\$suppress_from, 0], + "signedoffcc" => [\$signed_off_cc, 1], +); + +foreach my $setting (keys %config_settings) { + my $config = $repo->config_bool("sendemail.$setting"); + ${$config_settings{$setting}->[0]} = (defined $config) ? $config : $config_settings{$setting}->[1]; } @bcclist = $repo->config('sendemail.bcc'); @@ -167,7 +182,7 @@ if (!@bcclist or !$bcclist[0]) { # Begin by accumulating all the variables (defined above), that we will end up # needing, first, from the command line: -my $rc = GetOptions("from=s" => \$from, +my $rc = GetOptions("sender|from=s" => \$sender, "in-reply-to=s" => \$initial_reply_to, "subject=s" => \$initial_subject, "to=s" => \@to, @@ -177,10 +192,11 @@ my $rc = GetOptions("from=s" => \$from, "smtp-server=s" => \$smtp_server, "compose" => \$compose, "quiet" => \$quiet, - "suppress-from" => \$suppress_from, - "no-signed-off-cc|no-signed-off-by-cc" => \$no_signed_off_cc, + "suppress-from!" => \$suppress_from, + "signed-off-cc|signed-off-by-cc!" => \$signed_off_cc, "dry-run" => \$dry_run, "envelope-sender=s" => \$envelope_sender, + "thread!" => \$thread, ); unless ($rc) { @@ -203,8 +219,8 @@ foreach my $entry (@bcclist) { # Now, let's fill any that aren't set in with defaults: -my ($author) = $repo->ident_person('author'); -my ($committer) = $repo->ident_person('committer'); +my ($repoauthor) = $repo->ident_person('author'); +my ($repocommitter) = $repo->ident_person('committer'); my %aliases; my @alias_files = $repo->config('sendemail.aliasesfile'); @@ -224,7 +240,7 @@ my %parse_alias = ( $aliases{$1} = [ split(/\s+/, $2) ]; }}}, pine => sub { my $fh = shift; while (<$fh>) { - if (/^(\S+)\s+(.*)$/) { + if (/^(\S+)\t.*\t(.*)$/) { $aliases{$1} = [ split(/\s*,\s*/, $2) ]; }}}, gnus => sub { my $fh = shift; while (<$fh>) { @@ -241,15 +257,17 @@ if (@alias_files and $aliasfiletype and defined $parse_alias{$aliasfiletype}) { } } +($sender) = expand_aliases($sender) if defined $sender; + my $prompting = 0; -if (!defined $from) { - $from = $author || $committer; +if (!defined $sender) { + $sender = $repoauthor || $repocommitter; do { - $_ = $term->readline("Who should the emails appear to be from? [$from] "); + $_ = $term->readline("Who should the emails appear to be from? [$sender] "); } while (!defined $_); - $from = $_ if ($_); - print "Emails will be sent from: ", $from, "\n"; + $sender = $_ if ($_); + print "Emails will be sent from: ", $sender, "\n"; $prompting++; } @@ -274,7 +292,7 @@ sub expand_aliases { } @to = expand_aliases(@to); -@to = (map { sanitize_address_rfc822($_) } @to); +@to = (map { sanitize_address($_) } @to); @initial_cc = expand_aliases(@initial_cc); @bcclist = expand_aliases(@bcclist); @@ -287,7 +305,7 @@ if (!defined $initial_subject && $compose) { $prompting++; } -if (!defined $initial_reply_to && $prompting) { +if ($thread && !defined $initial_reply_to && $prompting) { do { $_= $term->readline("Message-ID to be used as In-Reply-To for the first email? ", $initial_reply_to); @@ -315,7 +333,7 @@ if ($compose) { # effort to have it be unique open(C,">",$compose_filename) or die "Failed to open for writing $compose_filename: $!"; - print C "From $from # This line is ignored.\n"; + print C "From $sender # This line is ignored.\n"; printf C "Subject: %s\n\n", $initial_subject; printf C <<EOT; GIT: Please enter your email below. @@ -326,8 +344,7 @@ GIT: for the patch you are writing. EOT close(C); - my $editor = $ENV{EDITOR}; - $editor = 'vi' unless defined $editor; + my $editor = $ENV{GIT_EDITOR} || $repo->config("core.editor") || $ENV{VISUAL} || $ENV{EDITOR} || "vi"; system($editor, $compose_filename); open(C2,">",$compose_filename . ".final") @@ -394,6 +411,7 @@ sub extract_valid_address { # check for a local address: return $address if ($address =~ /^($local_part_regexp)$/); + $address =~ s/^\s*<(.*)>\s*$/$1/; if ($have_email_valid) { return scalar Email::Valid->address($address); } else { @@ -412,13 +430,21 @@ sub extract_valid_address { # 1 second since the last time we were called. # We'll setup a template for the message id, using the "from" address: -my $message_id_from = extract_valid_address($from); -my $message_id_template = "<%s-git-send-email-$message_id_from>"; sub make_message_id { my $date = time; my $pseudo_rand = int (rand(4200)); + my $du_part; + for ($sender, $repocommitter, $repoauthor) { + $du_part = extract_valid_address(sanitize_address($_)); + last if (defined $du_part and $du_part ne ''); + } + if (not defined $du_part or $du_part eq '') { + use Sys::Hostname qw(); + $du_part = 'user@' . Sys::Hostname::hostname(); + } + my $message_id_template = "<%s-git-send-email-$du_part>"; $message_id = sprintf $message_id_template, "$date$pseudo_rand"; #print "new message id = $message_id\n"; # Was useful for debugging } @@ -436,22 +462,41 @@ sub unquote_rfc2047 { return "$_"; } -# If an address contains a . in the name portion, the name must be quoted. -sub sanitize_address_rfc822 +# use the simplest quoting being able to handle the recipient +sub sanitize_address { my ($recipient) = @_; - my ($recipient_name) = ($recipient =~ /^(.*?)\s+</); - if ($recipient_name && $recipient_name =~ /\./ && $recipient_name !~ /^".*"$/) { - my ($name, $addr) = ($recipient =~ /^(.*?)(\s+<.*)/); - $recipient = "\"$name\"$addr"; + my ($recipient_name, $recipient_addr) = ($recipient =~ /^(.*?)\s*(<.*)/); + + if (not $recipient_name) { + return "$recipient"; } - return $recipient; + + # if recipient_name is already quoted, do nothing + if ($recipient_name =~ /^(".*"|=\?utf-8\?q\?.*\?=)$/) { + return $recipient; + } + + # rfc2047 is needed if a non-ascii char is included + if ($recipient_name =~ /[^[:ascii:]]/) { + $recipient_name =~ s/([^-a-zA-Z0-9!*+\/])/sprintf("=%02X", ord($1))/eg; + $recipient_name =~ s/(.*)/=\?utf-8\?q\?$1\?=/; + } + + # double quotes are needed if specials or CTLs are included + elsif ($recipient_name =~ /[][()<>@,;:\\".\000-\037\177]/) { + $recipient_name =~ s/(["\\\r])/\\$1/; + $recipient_name = "\"$recipient_name\""; + } + + return "$recipient_name $recipient_addr"; + } sub send_message { my @recipients = unique_email_list(@to); - @cc = (map { sanitize_address_rfc822($_) } @cc); + @cc = (map { sanitize_address($_) } @cc); my $to = join (",\n\t", @recipients); @recipients = unique_email_list(@recipients,@cc,@bcclist); @recipients = (map { extract_valid_address($_) } @recipients); @@ -466,15 +511,17 @@ sub send_message if ($cc ne '') { $ccline = "\nCc: $cc"; } - $from = sanitize_address_rfc822($from); - my $header = "From: $from + my $sanitized_sender = sanitize_address($sender); + make_message_id(); + + my $header = "From: $sanitized_sender To: $to${ccline} Subject: $subject Date: $date Message-Id: $message_id X-Mailer: git-send-email $gitversion "; - if ($reply_to) { + if ($thread && $reply_to) { $header .= "In-Reply-To: $reply_to\n"; $header .= "References: $references\n"; @@ -484,7 +531,7 @@ X-Mailer: git-send-email $gitversion } my @sendmail_parameters = ('-i', @recipients); - my $raw_from = $from; + my $raw_from = $sanitized_sender; $raw_from = $envelope_sender if (defined $envelope_sender); $raw_from = extract_valid_address($raw_from); unshift (@sendmail_parameters, @@ -521,7 +568,7 @@ X-Mailer: git-send-email $gitversion } else { print "Sendmail: $smtp_server ".join(' ',@sendmail_parameters)."\n"; } - print "From: $from\nSubject: $subject\nCc: $cc\nTo: $to\n\n"; + print "From: $sanitized_sender\nSubject: $subject\nCc: $cc\nTo: $to\n\n"; if ($smtp) { print "Result: ", $smtp->code, ' ', ($smtp->message =~ /\n([^\n]+\n)$/s), "\n"; @@ -533,13 +580,12 @@ X-Mailer: git-send-email $gitversion $reply_to = $initial_reply_to; $references = $initial_reply_to || ''; -make_message_id(); $subject = $initial_subject; foreach my $t (@files) { open(F,"<",$t) or die "can't open file $t"; - my $author_not_sender = undef; + my $author = undef; @cc = @initial_cc; @xh = (); my $input_format = undef; @@ -561,12 +607,11 @@ foreach my $t (@files) { $subject = $1; } elsif (/^(Cc|From):\s+(.*)$/) { - if (unquote_rfc2047($2) eq $from) { - $from = $2; + if (unquote_rfc2047($2) eq $sender) { next if ($suppress_from); } elsif ($1 eq 'From') { - $author_not_sender = $2; + $author = unquote_rfc2047($2); } printf("(mbox) Adding cc: %s from line '%s'\n", $2, $_) unless $quiet; @@ -600,7 +645,7 @@ foreach my $t (@files) { } } else { $message .= $_; - if (/^(Signed-off-by|Cc): (.*)$/i && !$no_signed_off_cc) { + if (/^(Signed-off-by|Cc): (.*)$/i && $signed_off_cc) { my $c = $2; chomp $c; push @cc, $c; @@ -610,9 +655,8 @@ foreach my $t (@files) { } } close F; - if (defined $author_not_sender) { - $author_not_sender = unquote_rfc2047($author_not_sender); - $message = "From: $author_not_sender\n\n$message"; + if (defined $author) { + $message = "From: $author\n\n$message"; } @@ -627,7 +671,6 @@ foreach my $t (@files) { $references = "$message_id"; } } - make_message_id(); } if ($compose) { |