diff options
Diffstat (limited to 'git-repack.sh')
| -rwxr-xr-x | git-repack.sh | 165 |
1 files changed, 117 insertions, 48 deletions
diff --git a/git-repack.sh b/git-repack.sh index 156c5e8f4a..757933174e 100755 --- a/git-repack.sh +++ b/git-repack.sh @@ -3,41 +3,59 @@ # Copyright (c) 2005 Linus Torvalds # -USAGE='[-a] [-d] [-f] [-l] [-n] [-q] [--max-pack-size=N] [--window=N] [--window-memory=N] [--depth=N]' +OPTIONS_KEEPDASHDASH= +OPTIONS_SPEC="\ +git repack [options] +-- +a pack everything in a single pack +A same as -a, and turn unreachable objects loose +d remove redundant packs, and run git-prune-packed +f pass --no-reuse-delta to git-pack-objects +F pass --no-reuse-object to git-pack-objects +n do not run git-update-server-info +q,quiet be quiet +l pass --local to git-pack-objects +unpack-unreachable= with -A, do not loosen objects older than this + Packing constraints +window= size of the window used for delta compression +window-memory= same as the above, but limit memory size instead of entries count +depth= limits the maximum delta depth +max-pack-size= maximum size of each packfile +" SUBDIRECTORY_OK='Yes' . git-sh-setup -no_update_info= all_into_one= remove_redundant= -local= quiet= no_reuse= extra= -while case "$#" in 0) break ;; esac +no_update_info= all_into_one= remove_redundant= unpack_unreachable= +local= no_reuse= extra= +while test $# != 0 do case "$1" in -n) no_update_info=t ;; -a) all_into_one=t ;; + -A) all_into_one=t + unpack_unreachable=--unpack-unreachable ;; + --unpack-unreachable) + unpack_unreachable="--unpack-unreachable=$2"; shift ;; -d) remove_redundant=t ;; - -q) quiet=-q ;; - -f) no_reuse=--no-reuse-object ;; + -q) GIT_QUIET=t ;; + -f) no_reuse=--no-reuse-delta ;; + -F) no_reuse=--no-reuse-object ;; -l) local=--local ;; - --max-pack-size=*) extra="$extra $1" ;; - --window=*) extra="$extra $1" ;; - --window-memory=*) extra="$extra $1" ;; - --depth=*) extra="$extra $1" ;; + --max-pack-size|--window|--window-memory|--depth) + extra="$extra $1=$2"; shift ;; + --) shift; break;; *) usage ;; esac shift done -# Later we will default repack.UseDeltaBaseOffset to true -default_dbo=false - -case "`git config --bool repack.usedeltabaseoffset || - echo $default_dbo`" in +case "`git config --bool repack.usedeltabaseoffset || echo true`" in true) extra="$extra --delta-base-offset" ;; esac PACKDIR="$GIT_OBJECT_DIRECTORY/pack" -PACKTMP="$GIT_OBJECT_DIRECTORY/.tmp-$$-pack" +PACKTMP="$PACKDIR/.tmp-$$-pack" rm -f "$PACKTMP"-* trap 'rm -f "$PACKTMP"-*' 0 1 2 3 15 @@ -47,6 +65,7 @@ case ",$all_into_one," in args='--unpacked --incremental' ;; ,t,) + args= existing= if [ -d "$PACKDIR" ]; then for e in `cd "$PACKDIR" && find . -type f -name '*.pack' \ | sed -e 's/^\.\///' -e 's/\.pack$//'` @@ -54,58 +73,108 @@ case ",$all_into_one," in if [ -e "$PACKDIR/$e.keep" ]; then : keep else - args="$args --unpacked=$e.pack" existing="$existing $e" fi done + if test -n "$existing" -a -n "$unpack_unreachable" -a \ + -n "$remove_redundant" + then + # This may have arbitrary user arguments, so we + # have to protect it against whitespace splitting + # when it gets run as "pack-objects $args" later. + # Fortunately, we know it's an approxidate, so we + # can just use dots instead. + args="$args $(echo "$unpack_unreachable" | tr ' ' .)" + fi fi - [ -z "$args" ] && args='--unpacked --incremental' ;; esac -args="$args $local $quiet $no_reuse$extra" -names=$(git pack-objects --non-empty --all --reflog $args </dev/null "$PACKTMP") || +mkdir -p "$PACKDIR" || exit + +args="$args $local ${GIT_QUIET:+-q} $no_reuse$extra" +names=$(git pack-objects --keep-true-parents --honor-pack-keep --non-empty --all --reflog $args </dev/null "$PACKTMP") || exit 1 if [ -z "$names" ]; then - if test -z "$quiet"; then - echo Nothing new to pack. + say Nothing new to pack. +fi + +# Ok we have prepared all new packfiles. + +# First see if there are packs of the same name and if so +# if we can move them out of the way (this can happen if we +# repacked immediately after packing fully. +rollback= +failed= +for name in $names +do + for sfx in pack idx + do + file=pack-$name.$sfx + test -f "$PACKDIR/$file" || continue + rm -f "$PACKDIR/old-$file" && + mv "$PACKDIR/$file" "$PACKDIR/old-$file" || { + failed=t + break + } + rollback="$rollback $file" + done + test -z "$failed" || break +done + +# If renaming failed for any of them, roll the ones we have +# already renamed back to their original names. +if test -n "$failed" +then + rollback_failure= + for file in $rollback + do + mv "$PACKDIR/old-$file" "$PACKDIR/$file" || + rollback_failure="$rollback_failure $file" + done + if test -n "$rollback_failure" + then + echo >&2 "WARNING: Some packs in use have been renamed by" + echo >&2 "WARNING: prefixing old- to their name, in order to" + echo >&2 "WARNING: replace them with the new version of the" + echo >&2 "WARNING: file. But the operation failed, and" + echo >&2 "WARNING: attempt to rename them back to their" + echo >&2 "WARNING: original names also failed." + echo >&2 "WARNING: Please rename them in $PACKDIR manually:" + for file in $rollback_failure + do + echo >&2 "WARNING: old-$file -> $file" + done fi + exit 1 fi -for name in $names ; do + +# Now the ones with the same name are out of the way... +fullbases= +for name in $names +do fullbases="$fullbases pack-$name" chmod a-w "$PACKTMP-$name.pack" chmod a-w "$PACKTMP-$name.idx" - if test "$quiet" != '-q'; then - echo "Pack pack-$name created." - fi - mkdir -p "$PACKDIR" || exit - - for sfx in pack idx - do - if test -f "$PACKDIR/pack-$name.$sfx" - then - mv -f "$PACKDIR/pack-$name.$sfx" \ - "$PACKDIR/old-pack-$name.$sfx" - fi - done && mv -f "$PACKTMP-$name.pack" "$PACKDIR/pack-$name.pack" && - mv -f "$PACKTMP-$name.idx" "$PACKDIR/pack-$name.idx" && - test -f "$PACKDIR/pack-$name.pack" && - test -f "$PACKDIR/pack-$name.idx" || { - echo >&2 "Couldn't replace the existing pack with updated one." - echo >&2 "The original set of packs have been saved as" - echo >&2 "old-pack-$name.{pack,idx} in $PACKDIR." - exit 1 - } - rm -f "$PACKDIR/old-pack-$name.pack" "$PACKDIR/old-pack-$name.idx" + mv -f "$PACKTMP-$name.idx" "$PACKDIR/pack-$name.idx" || + exit done +# Remove the "old-" files +for name in $names +do + rm -f "$PACKDIR/old-pack-$name.idx" + rm -f "$PACKDIR/old-pack-$name.pack" +done + +# End of pack replacement. + if test "$remove_redundant" = t then # We know $existing are all redundant. if [ -n "$existing" ] then - sync ( cd "$PACKDIR" && for e in $existing do @@ -116,10 +185,10 @@ then done ) fi - git prune-packed $quiet + git prune-packed ${GIT_QUIET:+-q} fi case "$no_update_info" in t) : ;; -*) git-update-server-info ;; +*) git update-server-info ;; esac |