1 files changed, 584 insertions, 0 deletions

diff --git a/git-rebase.sh b/git-rebase.sh
new file mode 100755
index 0000000000..b5d9178275
--- /dev/null
+++ b/git-rebase.sh
@@ -0,0 +1,584 @@
+#!/bin/sh
+#
+# Copyright (c) 2005 Junio C Hamano.
+#
+
+USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]'
+LONG_USAGE='git-rebase replaces <branch> with a new branch of the
+same name.  When the --onto option is provided the new branch starts
+out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
+It then attempts to create a new commit for each commit from the original
+<branch> that does not exist in the <upstream> branch.
+
+It is possible that a merge failure will prevent this process from being
+completely automatic.  You will have to resolve any such merge failure
+and run git rebase --continue.  Another option is to bypass the commit
+that caused the merge failure with git rebase --skip.  To restore the
+original <branch> and remove the .git/rebase-apply working files, use the
+command git rebase --abort instead.
+
+Note that if <branch> is not specified on the command line, the
+currently checked out branch is used.
+
+Example:       git-rebase master~1 topic
+
+        A---B---C topic                   A'\''--B'\''--C'\'' topic
+       /                   -->           /
+  D---E---F---G master          D---E---F---G master
+'
+
+SUBDIRECTORY_OK=Yes
+OPTIONS_SPEC=
+. git-sh-setup
+set_reflog_action rebase
+require_work_tree
+cd_to_toplevel
+
+LF='
+'
+OK_TO_SKIP_PRE_REBASE=
+RESOLVEMSG="
+When you have resolved this problem run \"git rebase --continue\".
+If you would prefer to skip this patch, instead run \"git rebase --skip\".
+To restore the original branch and stop rebasing run \"git rebase --abort\".
+"
+unset newbase
+strategy=recursive
+do_merge=
+dotest="$GIT_DIR"/rebase-merge
+prec=4
+verbose=
+diffstat=$(git config --bool rebase.stat)
+git_am_opt=
+rebase_root=
+force_rebase=
+allow_rerere_autoupdate=
+
+continue_merge () {
+	test -n "$prev_head" || die "prev_head must be defined"
+	test -d "$dotest" || die "$dotest directory does not exist"
+
+	unmerged=$(git ls-files -u)
+	if test -n "$unmerged"
+	then
+		echo "You still have unmerged paths in your index"
+		echo "did you forget to use git add?"
+		die "$RESOLVEMSG"
+	fi
+
+	cmt=`cat "$dotest/current"`
+	if ! git diff-index --quiet --ignore-submodules HEAD --
+	then
+		if ! git commit --no-verify -C "$cmt"
+		then
+			echo "Commit failed, please do not call \"git commit\""
+			echo "directly, but instead do one of the following: "
+			die "$RESOLVEMSG"
+		fi
+		if test -z "$GIT_QUIET"
+		then
+			printf "Committed: %0${prec}d " $msgnum
+		fi
+	else
+		if test -z "$GIT_QUIET"
+		then
+			printf "Already applied: %0${prec}d " $msgnum
+		fi
+	fi
+	test -z "$GIT_QUIET" &&
+	git log --format=%s -1 "$cmt"
+
+	prev_head=`git rev-parse HEAD^0`
+	# save the resulting commit so we can read-tree on it later
+	echo "$prev_head" > "$dotest/prev_head"
+
+	# onto the next patch:
+	msgnum=$(($msgnum + 1))
+	echo "$msgnum" >"$dotest/msgnum"
+}
+
+call_merge () {
+	cmt="$(cat "$dotest/cmt.$1")"
+	echo "$cmt" > "$dotest/current"
+	hd=$(git rev-parse --verify HEAD)
+	cmt_name=$(git symbolic-ref HEAD 2> /dev/null || echo HEAD)
+	msgnum=$(cat "$dotest/msgnum")
+	end=$(cat "$dotest/end")
+	eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
+	eval GITHEAD_$hd='$(cat "$dotest/onto_name")'
+	export GITHEAD_$cmt GITHEAD_$hd
+	if test -n "$GIT_QUIET"
+	then
+		export GIT_MERGE_VERBOSITY=1
+	fi
+	git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
+	rv=$?
+	case "$rv" in
+	0)
+		unset GITHEAD_$cmt GITHEAD_$hd
+		return
+		;;
+	1)
+		git rerere $allow_rerere_autoupdate
+		die "$RESOLVEMSG"
+		;;
+	2)
+		echo "Strategy: $rv $strategy failed, try another" 1>&2
+		die "$RESOLVEMSG"
+		;;
+	*)
+		die "Unknown exit code ($rv) from command:" \
+			"git-merge-$strategy $cmt^ -- HEAD $cmt"
+		;;
+	esac
+}
+
+move_to_original_branch () {
+	test -z "$head_name" &&
+		head_name="$(cat "$dotest"/head-name)" &&
+		onto="$(cat "$dotest"/onto)" &&
+		orig_head="$(cat "$dotest"/orig-head)"
+	case "$head_name" in
+	refs/*)
+		message="rebase finished: $head_name onto $onto"
+		git update-ref -m "$message" \
+			$head_name $(git rev-parse HEAD) $orig_head &&
+		git symbolic-ref HEAD $head_name ||
+		die "Could not move back to $head_name"
+		;;
+	esac
+}
+
+finish_rb_merge () {
+	move_to_original_branch
+	rm -r "$dotest"
+	say All done.
+}
+
+is_interactive () {
+	while test $# != 0
+	do
+		case "$1" in
+			-i|--interactive)
+				interactive_rebase=explicit
+				break
+			;;
+			-p|--preserve-merges)
+				interactive_rebase=implied
+			;;
+		esac
+		shift
+	done
+
+	if [ "$interactive_rebase" = implied ]; then
+		GIT_EDITOR=:
+		export GIT_EDITOR
+	fi
+
+	test -n "$interactive_rebase" || test -f "$dotest"/interactive
+}
+
+run_pre_rebase_hook () {
+	if test -z "$OK_TO_SKIP_PRE_REBASE" &&
+	   test -x "$GIT_DIR/hooks/pre-rebase"
+	then
+		"$GIT_DIR/hooks/pre-rebase" ${1+"$@"} ||
+		die "The pre-rebase hook refused to rebase."
+	fi
+}
+
+test -f "$GIT_DIR"/rebase-apply/applying &&
+	die 'It looks like git-am is in progress. Cannot rebase.'
+
+is_interactive "$@" && exec git-rebase--interactive "$@"
+
+if test $# -eq 0
+then
+	test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage
+	test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing &&
+		die 'A rebase is in progress, try --continue, --skip or --abort.'
+	die "No arguments given and $GIT_DIR/rebase-apply already exists."
+fi
+
+while test $# != 0
+do
+	case "$1" in
+	--no-verify)
+		OK_TO_SKIP_PRE_REBASE=yes
+		;;
+	--continue)
+		test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
+			die "No rebase in progress?"
+
+		git diff-files --quiet --ignore-submodules || {
+			echo "You must edit all merge conflicts and then"
+			echo "mark them as resolved using git add"
+			exit 1
+		}
+		if test -d "$dotest"
+		then
+			prev_head=$(cat "$dotest/prev_head")
+			end=$(cat "$dotest/end")
+			msgnum=$(cat "$dotest/msgnum")
+			onto=$(cat "$dotest/onto")
+			GIT_QUIET=$(cat "$dotest/quiet")
+			continue_merge
+			while test "$msgnum" -le "$end"
+			do
+				call_merge "$msgnum"
+				continue_merge
+			done
+			finish_rb_merge
+			exit
+		fi
+		head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
+		onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
+		orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
+		GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
+		git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
+		move_to_original_branch
+		exit
+		;;
+	--skip)
+		test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
+			die "No rebase in progress?"
+
+		git reset --hard HEAD || exit $?
+		if test -d "$dotest"
+		then
+			git rerere clear
+			prev_head=$(cat "$dotest/prev_head")
+			end=$(cat "$dotest/end")
+			msgnum=$(cat "$dotest/msgnum")
+			msgnum=$(($msgnum + 1))
+			onto=$(cat "$dotest/onto")
+			GIT_QUIET=$(cat "$dotest/quiet")
+			while test "$msgnum" -le "$end"
+			do
+				call_merge "$msgnum"
+				continue_merge
+			done
+			finish_rb_merge
+			exit
+		fi
+		head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
+		onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
+		orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
+		GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
+		git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
+		move_to_original_branch
+		exit
+		;;
+	--abort)
+		test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
+			die "No rebase in progress?"
+
+		git rerere clear
+		if test -d "$dotest"
+		then
+			GIT_QUIET=$(cat "$dotest/quiet")
+			move_to_original_branch
+		else
+			dotest="$GIT_DIR"/rebase-apply
+			GIT_QUIET=$(cat "$dotest/quiet")
+			move_to_original_branch
+		fi
+		git reset --hard $(cat "$dotest/orig-head")
+		rm -r "$dotest"
+		exit
+		;;
+	--onto)
+		test 2 -le "$#" || usage
+		newbase="$2"
+		shift
+		;;
+	-M|-m|--m|--me|--mer|--merg|--merge)
+		do_merge=t
+		;;
+	-s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
+		--strateg=*|--strategy=*|\
+	-s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
+		case "$#,$1" in
+		*,*=*)
+			strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			strategy="$2"
+			shift ;;
+		esac
+		do_merge=t
+		;;
+	-n|--no-stat)
+		diffstat=
+		;;
+	--stat)
+		diffstat=t
+		;;
+	-v|--verbose)
+		verbose=t
+		diffstat=t
+		GIT_QUIET=
+		;;
+	-q|--quiet)
+		GIT_QUIET=t
+		git_am_opt="$git_am_opt -q"
+		verbose=
+		diffstat=
+		;;
+	--whitespace=*)
+		git_am_opt="$git_am_opt $1"
+		case "$1" in
+		--whitespace=fix|--whitespace=strip)
+			force_rebase=t
+			;;
+		esac
+		;;
+	--ignore-whitespace)
+		git_am_opt="$git_am_opt $1"
+		;;
+	--committer-date-is-author-date|--ignore-date)
+		git_am_opt="$git_am_opt $1"
+		force_rebase=t
+		;;
+	-C*)
+		git_am_opt="$git_am_opt $1"
+		;;
+	--root)
+		rebase_root=t
+		;;
+	-f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase)
+		force_rebase=t
+		;;
+	--rerere-autoupdate|--no-rerere-autoupdate)
+		allow_rerere_autoupdate="$1"
+		;;
+	-*)
+		usage
+		;;
+	*)
+		break
+		;;
+	esac
+	shift
+done
+test $# -gt 2 && usage
+
+# Make sure we do not have $GIT_DIR/rebase-apply
+if test -z "$do_merge"
+then
+	if mkdir "$GIT_DIR"/rebase-apply 2>/dev/null
+	then
+		rmdir "$GIT_DIR"/rebase-apply
+	else
+		echo >&2 '
+It seems that I cannot create a rebase-apply directory, and
+I wonder if you are in the middle of patch application or another
+rebase.  If that is not the case, please
+	rm -fr '"$GIT_DIR"'/rebase-apply
+and run me again.  I am stopping in case you still have something
+valuable there.'
+		exit 1
+	fi
+else
+	if test -d "$dotest"
+	then
+		die "previous rebase directory $dotest still exists." \
+			'Try git rebase (--continue | --abort | --skip)'
+	fi
+fi
+
+# The tree must be really really clean.
+if ! git update-index --ignore-submodules --refresh > /dev/null; then
+	echo >&2 "cannot rebase: you have unstaged changes"
+	git diff-files --name-status -r --ignore-submodules -- >&2
+	exit 1
+fi
+diff=$(git diff-index --cached --name-status -r --ignore-submodules HEAD --)
+case "$diff" in
+?*)	echo >&2 "cannot rebase: your index contains uncommitted changes"
+	echo >&2 "$diff"
+	exit 1
+	;;
+esac
+
+if test -z "$rebase_root"
+then
+	# The upstream head must be given.  Make sure it is valid.
+	upstream_name="$1"
+	shift
+	upstream=`git rev-parse --verify "${upstream_name}^0"` ||
+	die "invalid upstream $upstream_name"
+	unset root_flag
+	upstream_arg="$upstream_name"
+else
+	test -z "$newbase" && die "--root must be used with --onto"
+	unset upstream_name
+	unset upstream
+	root_flag="--root"
+	upstream_arg="$root_flag"
+fi
+
+# Make sure the branch to rebase onto is valid.
+onto_name=${newbase-"$upstream_name"}
+case "$onto_name" in
+*...*)
+	if	left=${onto_name%...*} right=${onto_name#*...} &&
+		onto=$(git merge-base --all ${left:-HEAD} ${right:-HEAD})
+	then
+		case "$onto" in
+		?*"$LF"?*)
+			die "$onto_name: there are more than one merge bases"
+			;;
+		'')
+			die "$onto_name: there is no merge base"
+			;;
+		esac
+	else
+		die "$onto_name: there is no merge base"
+	fi
+	;;
+*)
+	onto=$(git rev-parse --verify "${onto_name}^0") || exit
+	;;
+esac
+
+# If a hook exists, give it a chance to interrupt
+run_pre_rebase_hook "$upstream_arg" "$@"
+
+# If the branch to rebase is given, that is the branch we will rebase
+# $branch_name -- branch being rebased, or HEAD (already detached)
+# $orig_head -- commit object name of tip of the branch before rebasing
+# $head_name -- refs/heads/<that-branch> or "detached HEAD"
+switch_to=
+case "$#" in
+1)
+	# Is it "rebase other $branchname" or "rebase other $commit"?
+	branch_name="$1"
+	switch_to="$1"
+
+	if git show-ref --verify --quiet -- "refs/heads/$1" &&
+	   branch=$(git rev-parse -q --verify "refs/heads/$1")
+	then
+		head_name="refs/heads/$1"
+	elif branch=$(git rev-parse -q --verify "$1")
+	then
+		head_name="detached HEAD"
+	else
+		usage
+	fi
+	;;
+*)
+	# Do not need to switch branches, we are already on it.
+	if branch_name=`git symbolic-ref -q HEAD`
+	then
+		head_name=$branch_name
+		branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
+	else
+		head_name="detached HEAD"
+		branch_name=HEAD ;# detached
+	fi
+	branch=$(git rev-parse --verify "${branch_name}^0") || exit
+	;;
+esac
+orig_head=$branch
+
+# Now we are rebasing commits $upstream..$branch (or with --root,
+# everything leading up to $branch) on top of $onto
+
+# Check if we are already based on $onto with linear history,
+# but this should be done only when upstream and onto are the same.
+mb=$(git merge-base "$onto" "$branch")
+if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
+	# linear history?
+	! (git rev-list --parents "$onto".."$branch" | sane_grep " .* ") > /dev/null
+then
+	if test -z "$force_rebase"
+	then
+		# Lazily switch to the target branch if needed...
+		test -z "$switch_to" || git checkout "$switch_to"
+		say "Current branch $branch_name is up to date."
+		exit 0
+	else
+		say "Current branch $branch_name is up to date, rebase forced."
+	fi
+fi
+
+# Detach HEAD and reset the tree
+say "First, rewinding head to replay your work on top of it..."
+git checkout -q "$onto^0" || die "could not detach HEAD"
+git update-ref ORIG_HEAD $branch
+
+if test -n "$diffstat"
+then
+	if test -n "$verbose"
+	then
+		echo "Changes from $mb to $onto:"
+	fi
+	# We want color (if set), but no pager
+	GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
+fi
+
+# If the $onto is a proper descendant of the tip of the branch, then
+# we just fast-forwarded.
+if test "$mb" = "$branch"
+then
+	say "Fast-forwarded $branch_name to $onto_name."
+	move_to_original_branch
+	exit 0
+fi
+
+if test -n "$rebase_root"
+then
+	revisions="$onto..$orig_head"
+else
+	revisions="$upstream..$orig_head"
+fi
+
+if test -z "$do_merge"
+then
+	git format-patch -k --stdout --full-index --ignore-if-in-upstream \
+		$root_flag "$revisions" |
+	git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
+	move_to_original_branch
+	ret=$?
+	test 0 != $ret -a -d "$GIT_DIR"/rebase-apply &&
+		echo $head_name > "$GIT_DIR"/rebase-apply/head-name &&
+		echo $onto > "$GIT_DIR"/rebase-apply/onto &&
+		echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head &&
+		echo "$GIT_QUIET" > "$GIT_DIR"/rebase-apply/quiet
+	exit $ret
+fi
+
+# start doing a rebase with git-merge
+# this is rename-aware if the recursive (default) strategy is used
+
+mkdir -p "$dotest"
+echo "$onto" > "$dotest/onto"
+echo "$onto_name" > "$dotest/onto_name"
+prev_head=$orig_head
+echo "$prev_head" > "$dotest/prev_head"
+echo "$orig_head" > "$dotest/orig-head"
+echo "$head_name" > "$dotest/head-name"
+echo "$GIT_QUIET" > "$dotest/quiet"
+
+msgnum=0
+for cmt in `git rev-list --reverse --no-merges "$revisions"`
+do
+	msgnum=$(($msgnum + 1))
+	echo "$cmt" > "$dotest/cmt.$msgnum"
+done
+
+echo 1 >"$dotest/msgnum"
+echo $msgnum >"$dotest/end"
+
+end=$msgnum
+msgnum=1
+
+while test "$msgnum" -le "$end"
+do
+	call_merge "$msgnum"
+	continue_merge
+done
+
+finish_rb_merge