1 files changed, 360 insertions, 0 deletions
diff --git a/git-rebase.sh b/git-rebase.sh
new file mode 100755
index 0000000000..2dc2c4fe9b
--- /dev/null
+++ b/git-rebase.sh
@@ -0,0 +1,360 @@
+#!/bin/sh
+#
+# Copyright (c) 2005 Junio C Hamano.
+#
+
+USAGE='[-v] [--onto <newbase>] <upstream> [<branch>]'
+LONG_USAGE='git-rebase replaces <branch> with a new branch of the
+same name.  When the --onto option is provided the new branch starts
+out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
+It then attempts to create a new commit for each commit from the original
+<branch> that does not exist in the <upstream> branch.
+
+It is possible that a merge failure will prevent this process from being
+completely automatic.  You will have to resolve any such merge failure
+and run git rebase --continue.  Another option is to bypass the commit
+that caused the merge failure with git rebase --skip.  To restore the
+original <branch> and remove the .dotest working files, use the command
+git rebase --abort instead.
+
+Note that if <branch> is not specified on the command line, the
+currently checked out branch is used.  You must be in the top
+directory of your project to start (or continue) a rebase.
+
+Example:       git-rebase master~1 topic
+
+        A---B---C topic                   A'\''--B'\''--C'\'' topic
+       /                   -->           /
+  D---E---F---G master          D---E---F---G master
+'
+
+SUBDIRECTORY_OK=Yes
+. git-sh-setup
+set_reflog_action rebase
+require_work_tree
+cd_to_toplevel
+
+RESOLVEMSG="
+When you have resolved this problem run \"git rebase --continue\".
+If you would prefer to skip this patch, instead run \"git rebase --skip\".
+To restore the original branch and stop rebasing run \"git rebase --abort\".
+"
+unset newbase
+strategy=recursive
+do_merge=
+dotest=$GIT_DIR/.dotest-merge
+prec=4
+verbose=
+git_am_opt=
+
+continue_merge () {
+	test -n "$prev_head" || die "prev_head must be defined"
+	test -d "$dotest" || die "$dotest directory does not exist"
+
+	unmerged=$(git-ls-files -u)
+	if test -n "$unmerged"
+	then
+		echo "You still have unmerged paths in your index"
+		echo "did you forget update-index?"
+		die "$RESOLVEMSG"
+	fi
+
+	if ! git-diff-index --quiet HEAD
+	then
+		if ! git-commit -C "`cat $dotest/current`"
+		then
+			echo "Commit failed, please do not call \"git commit\""
+			echo "directly, but instead do one of the following: "
+			die "$RESOLVEMSG"
+		fi
+		printf "Committed: %0${prec}d" $msgnum
+	else
+		printf "Already applied: %0${prec}d" $msgnum
+	fi
+	echo ' '`git-rev-list --pretty=oneline -1 HEAD | \
+				sed 's/^[a-f0-9]\+ //'`
+
+	prev_head=`git-rev-parse HEAD^0`
+	# save the resulting commit so we can read-tree on it later
+	echo "$prev_head" > "$dotest/prev_head"
+
+	# onto the next patch:
+	msgnum=$(($msgnum + 1))
+	echo "$msgnum" >"$dotest/msgnum"
+}
+
+call_merge () {
+	cmt="$(cat $dotest/cmt.$1)"
+	echo "$cmt" > "$dotest/current"
+	hd=$(git-rev-parse --verify HEAD)
+	cmt_name=$(git-symbolic-ref HEAD)
+	msgnum=$(cat $dotest/msgnum)
+	end=$(cat $dotest/end)
+	eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
+	eval GITHEAD_$hd='"$(cat $dotest/onto_name)"'
+	export GITHEAD_$cmt GITHEAD_$hd
+	git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
+	rv=$?
+	case "$rv" in
+	0)
+		unset GITHEAD_$cmt GITHEAD_$hd
+		return
+		;;
+	1)
+		test -d "$GIT_DIR/rr-cache" && git-rerere
+		die "$RESOLVEMSG"
+		;;
+	2)
+		echo "Strategy: $rv $strategy failed, try another" 1>&2
+		die "$RESOLVEMSG"
+		;;
+	*)
+		die "Unknown exit code ($rv) from command:" \
+			"git-merge-$strategy $cmt^ -- HEAD $cmt"
+		;;
+	esac
+}
+
+finish_rb_merge () {
+	rm -r "$dotest"
+	echo "All done."
+}
+
+while case "$#" in 0) break ;; esac
+do
+	case "$1" in
+	--continue)
+		git-diff-files --quiet || {
+			echo "You must edit all merge conflicts and then"
+			echo "mark them as resolved using git update-index"
+			exit 1
+		}
+		if test -d "$dotest"
+		then
+			prev_head="`cat $dotest/prev_head`"
+			end="`cat $dotest/end`"
+			msgnum="`cat $dotest/msgnum`"
+			onto="`cat $dotest/onto`"
+			continue_merge
+			while test "$msgnum" -le "$end"
+			do
+				call_merge "$msgnum"
+				continue_merge
+			done
+			finish_rb_merge
+			exit
+		fi
+		git am --resolved --3way --resolvemsg="$RESOLVEMSG"
+		exit
+		;;
+	--skip)
+		if test -d "$dotest"
+		then
+			if test -d "$GIT_DIR/rr-cache"
+			then
+				git-rerere clear
+			fi
+			prev_head="`cat $dotest/prev_head`"
+			end="`cat $dotest/end`"
+			msgnum="`cat $dotest/msgnum`"
+			msgnum=$(($msgnum + 1))
+			onto="`cat $dotest/onto`"
+			while test "$msgnum" -le "$end"
+			do
+				call_merge "$msgnum"
+				continue_merge
+			done
+			finish_rb_merge
+			exit
+		fi
+		git am -3 --skip --resolvemsg="$RESOLVEMSG"
+		exit
+		;;
+	--abort)
+		if test -d "$GIT_DIR/rr-cache"
+		then
+			git-rerere clear
+		fi
+		if test -d "$dotest"
+		then
+			rm -r "$dotest"
+		elif test -d .dotest
+		then
+			rm -r .dotest
+		else
+			die "No rebase in progress?"
+		fi
+		git reset --hard ORIG_HEAD
+		exit
+		;;
+	--onto)
+		test 2 -le "$#" || usage
+		newbase="$2"
+		shift
+		;;
+	-M|-m|--m|--me|--mer|--merg|--merge)
+		do_merge=t
+		;;
+	-s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
+		--strateg=*|--strategy=*|\
+	-s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
+		case "$#,$1" in
+		*,*=*)
+			strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			strategy="$2"
+			shift ;;
+		esac
+		do_merge=t
+		;;
+	-v|--verbose)
+		verbose=t
+		;;
+	-C*)
+		git_am_opt=$1
+		shift
+		;;
+	-*)
+		usage
+		;;
+	*)
+		break
+		;;
+	esac
+	shift
+done
+
+# Make sure we do not have .dotest
+if test -z "$do_merge"
+then
+	if mkdir .dotest
+	then
+		rmdir .dotest
+	else
+		echo >&2 '
+It seems that I cannot create a .dotest directory, and I wonder if you
+are in the middle of patch application or another rebase.  If that is not
+the case, please rm -fr .dotest and run me again.  I am stopping in case
+you still have something valuable there.'
+		exit 1
+	fi
+else
+	if test -d "$dotest"
+	then
+		die "previous dotest directory $dotest still exists." \
+			'try git-rebase < --continue | --abort >'
+	fi
+fi
+
+# The tree must be really really clean.
+git-update-index --refresh || exit
+diff=$(git-diff-index --cached --name-status -r HEAD)
+case "$diff" in
+?*)	echo "cannot rebase: your index is not up-to-date"
+	echo "$diff"
+	exit 1
+	;;
+esac
+
+# The upstream head must be given.  Make sure it is valid.
+upstream_name="$1"
+upstream=`git rev-parse --verify "${upstream_name}^0"` ||
+    die "invalid upstream $upstream_name"
+
+# Make sure the branch to rebase onto is valid.
+onto_name=${newbase-"$upstream_name"}
+onto=$(git-rev-parse --verify "${onto_name}^0") || exit
+
+# If a hook exists, give it a chance to interrupt
+if test -x "$GIT_DIR/hooks/pre-rebase"
+then
+	"$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
+		echo >&2 "The pre-rebase hook refused to rebase."
+		exit 1
+	}
+fi
+
+# If the branch to rebase is given, first switch to it.
+case "$#" in
+2)
+	branch_name="$2"
+	git-checkout "$2" || usage
+	;;
+*)
+	if branch_name=`git symbolic-ref -q HEAD`
+	then
+		branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
+	else
+		branch_name=HEAD ;# detached
+	fi
+	;;
+esac
+branch=$(git-rev-parse --verify "${branch_name}^0") || exit
+
+# Now we are rebasing commits $upstream..$branch on top of $onto
+
+# Check if we are already based on $onto, but this should be
+# done only when upstream and onto are the same.
+mb=$(git-merge-base "$onto" "$branch")
+if test "$upstream" = "$onto" && test "$mb" = "$onto"
+then
+	echo >&2 "Current branch $branch_name is up to date."
+	exit 0
+fi
+
+if test -n "$verbose"
+then
+	echo "Changes from $mb to $onto:"
+	git-diff-tree --stat --summary "$mb" "$onto"
+fi
+
+# Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
+echo "First, rewinding head to replay your work on top of it..."
+git-reset --hard "$onto"
+
+# If the $onto is a proper descendant of the tip of the branch, then
+# we just fast forwarded.
+if test "$mb" = "$branch"
+then
+	echo >&2 "Fast-forwarded $branch_name to $onto_name."
+	exit 0
+fi
+
+if test -z "$do_merge"
+then
+	git-format-patch -k --stdout --full-index --ignore-if-in-upstream "$upstream"..ORIG_HEAD |
+	git am $git_am_opt --binary -3 -k --resolvemsg="$RESOLVEMSG"
+	exit $?
+fi
+
+# start doing a rebase with git-merge
+# this is rename-aware if the recursive (default) strategy is used
+
+mkdir -p "$dotest"
+echo "$onto" > "$dotest/onto"
+echo "$onto_name" > "$dotest/onto_name"
+prev_head=`git-rev-parse HEAD^0`
+echo "$prev_head" > "$dotest/prev_head"
+
+msgnum=0
+for cmt in `git-rev-list --reverse --no-merges "$upstream"..ORIG_HEAD`
+do
+	msgnum=$(($msgnum + 1))
+	echo "$cmt" > "$dotest/cmt.$msgnum"
+done
+
+echo 1 >"$dotest/msgnum"
+echo $msgnum >"$dotest/end"
+
+end=$msgnum
+msgnum=1
+
+while test "$msgnum" -le "$end"
+do
+	call_merge "$msgnum"
+	continue_merge
+done
+
+finish_rb_merge