summaryrefslogtreecommitdiff
path: root/git-rebase--interactive.sh
diff options
context:
space:
mode:
Diffstat (limited to 'git-rebase--interactive.sh')
-rw-r--r--git-rebase--interactive.sh301
1 files changed, 178 insertions, 123 deletions
diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh
index 655ebaa471..ded4595638 100644
--- a/git-rebase--interactive.sh
+++ b/git-rebase--interactive.sh
@@ -128,7 +128,7 @@ mark_action_done () {
if test "$last_count" != "$new_count"
then
last_count=$new_count
- printf "Rebasing (%d/%d)\r" $new_count $total
+ eval_gettext "Rebasing (\$new_count/\$total)"; printf "\r"
test -z "$verbose" || echo
fi
}
@@ -144,29 +144,28 @@ reschedule_last_action () {
}
append_todo_help () {
- git stripspace --comment-lines >>"$todo" <<\EOF
-
+ gettext "
Commands:
p, pick = use commit
r, reword = use commit, but edit the commit message
e, edit = use commit, but stop for amending
s, squash = use commit, but meld into previous commit
- f, fixup = like "squash", but discard this commit's log message
+ f, fixup = like \"squash\", but discard this commit's log message
x, exec = run command (the rest of the line) using shell
d, drop = remove commit
These lines can be re-ordered; they are executed from top to bottom.
+" | git stripspace --comment-lines >>"$todo"
-EOF
if test $(get_missing_commit_check_level) = error
then
- git stripspace --comment-lines >>"$todo" <<\EOF
+ gettext "
Do not remove any line. Use 'drop' explicitly to remove a commit.
-EOF
+" | git stripspace --comment-lines >>"$todo"
else
- git stripspace --comment-lines >>"$todo" <<\EOF
+ gettext "
If you remove a line here THAT COMMIT WILL BE LOST.
-EOF
+" | git stripspace --comment-lines >>"$todo"
fi
}
@@ -192,7 +191,6 @@ make_patch () {
die_with_patch () {
echo "$1" > "$state_dir"/stopped-sha
make_patch "$1"
- git rerere
die "$2"
}
@@ -201,18 +199,20 @@ exit_with_patch () {
make_patch $1
git rev-parse --verify HEAD > "$amend"
gpg_sign_opt_quoted=${gpg_sign_opt:+$(git rev-parse --sq-quote "$gpg_sign_opt")}
- warn "You can amend the commit now, with"
- warn
- warn " git commit --amend $gpg_sign_opt_quoted"
- warn
- warn "Once you are satisfied with your changes, run"
- warn
- warn " git rebase --continue"
+ warn "$(eval_gettext "\
+You can amend the commit now, with
+
+ git commit --amend \$gpg_sign_opt_quoted
+
+Once you are satisfied with your changes, run
+
+ git rebase --continue")"
warn
exit $2
}
die_abort () {
+ apply_autostash
rm -rf "$state_dir"
die "$1"
}
@@ -222,10 +222,12 @@ has_action () {
}
is_empty_commit() {
- tree=$(git rev-parse -q --verify "$1"^{tree} 2>/dev/null ||
- die "$1: not a commit that can be picked")
- ptree=$(git rev-parse -q --verify "$1"^^{tree} 2>/dev/null ||
- ptree=4b825dc642cb6eb9a060e54bf8d69288fbee4904)
+ tree=$(git rev-parse -q --verify "$1"^{tree} 2>/dev/null) || {
+ sha1=$1
+ die "$(eval_gettext "\$sha1: not a commit that can be picked")"
+ }
+ ptree=$(git rev-parse -q --verify "$1"^^{tree} 2>/dev/null) ||
+ ptree=4b825dc642cb6eb9a060e54bf8d69288fbee4904
test "$tree" = "$ptree"
}
@@ -261,7 +263,7 @@ pick_one () {
case "$1" in -n) sha1=$2; ff= ;; *) sha1=$1 ;; esac
case "$force_rebase" in '') ;; ?*) ff= ;; esac
- output git rev-parse --verify $sha1 || die "Invalid commit name: $sha1"
+ output git rev-parse --verify $sha1 || die "$(eval_gettext "Invalid commit name: \$sha1")"
if is_empty_commit "$sha1"
then
@@ -303,7 +305,7 @@ pick_one_preserving_merges () {
git rev-parse HEAD > "$rewritten"/$current_commit
done <"$state_dir"/current-commit
rm "$state_dir"/current-commit ||
- die "Cannot write current commit's replacement sha1"
+ die "$(gettext "Cannot write current commit's replacement sha1")"
fi
fi
@@ -355,9 +357,9 @@ pick_one_preserving_merges () {
done
case $fast_forward in
t)
- output warn "Fast-forward to $sha1"
+ output warn "$(eval_gettext "Fast-forward to \$sha1")"
output git reset --hard $sha1 ||
- die "Cannot fast-forward to $sha1"
+ die "$(eval_gettext "Cannot fast-forward to \$sha1")"
;;
f)
first_parent=$(expr "$new_parents" : ' \([^ ]*\)')
@@ -366,12 +368,12 @@ pick_one_preserving_merges () {
then
# detach HEAD to current parent
output git checkout $first_parent 2> /dev/null ||
- die "Cannot move HEAD to $first_parent"
+ die "$(eval_gettext "Cannot move HEAD to \$first_parent")"
fi
case "$new_parents" in
' '*' '*)
- test "a$1" = a-n && die "Refusing to squash a merge: $sha1"
+ test "a$1" = a-n && die "$(eval_gettext "Refusing to squash a merge: \$sha1")"
# redo merge
author_script_content=$(get_author_ident_from_commit $sha1)
@@ -385,7 +387,7 @@ pick_one_preserving_merges () {
$merge_args $strategy_args -m "$msg_content" $new_parents'
then
printf "%s\n" "$msg_content" > "$GIT_DIR"/MERGE_MSG
- die_with_patch $sha1 "Error redoing merge $sha1"
+ die_with_patch $sha1 "$(eval_gettext "Error redoing merge \$sha1")"
fi
echo "$sha1 $(git rev-parse HEAD^0)" >> "$rewritten_list"
;;
@@ -393,19 +395,59 @@ pick_one_preserving_merges () {
output eval git cherry-pick \
${gpg_sign_opt:+$(git rev-parse --sq-quote "$gpg_sign_opt")} \
"$strategy_args" "$@" ||
- die_with_patch $sha1 "Could not pick $sha1"
+ die_with_patch $sha1 "$(eval_gettext "Could not pick \$sha1")"
;;
esac
;;
esac
}
-nth_string () {
- case "$1" in
- *1[0-9]|*[04-9]) echo "$1"th;;
- *1) echo "$1"st;;
- *2) echo "$1"nd;;
- *3) echo "$1"rd;;
+this_nth_commit_message () {
+ n=$1
+ case "$n" in
+ 1) gettext "This is the 1st commit message:";;
+ 2) gettext "This is the 2nd commit message:";;
+ 3) gettext "This is the 3rd commit message:";;
+ 4) gettext "This is the 4th commit message:";;
+ 5) gettext "This is the 5th commit message:";;
+ 6) gettext "This is the 6th commit message:";;
+ 7) gettext "This is the 7th commit message:";;
+ 8) gettext "This is the 8th commit message:";;
+ 9) gettext "This is the 9th commit message:";;
+ 10) gettext "This is the 10th commit message:";;
+ # TRANSLATORS: if the language you are translating into
+ # doesn't allow you to compose a sentence in this fashion,
+ # consider translating as if this and the following few strings
+ # were "This is the commit message ${n}:"
+ *1[0-9]|*[04-9]) eval_gettext "This is the \${n}th commit message:";;
+ *1) eval_gettext "This is the \${n}st commit message:";;
+ *2) eval_gettext "This is the \${n}nd commit message:";;
+ *3) eval_gettext "This is the \${n}rd commit message:";;
+ *) eval_gettext "This is the commit message \${n}:";;
+ esac
+}
+skip_nth_commit_message () {
+ n=$1
+ case "$n" in
+ 1) gettext "The 1st commit message will be skipped:";;
+ 2) gettext "The 2nd commit message will be skipped:";;
+ 3) gettext "The 3rd commit message will be skipped:";;
+ 4) gettext "The 4th commit message will be skipped:";;
+ 5) gettext "The 5th commit message will be skipped:";;
+ 6) gettext "The 6th commit message will be skipped:";;
+ 7) gettext "The 7th commit message will be skipped:";;
+ 8) gettext "The 8th commit message will be skipped:";;
+ 9) gettext "The 9th commit message will be skipped:";;
+ 10) gettext "The 10th commit message will be skipped:";;
+ # TRANSLATORS: if the language you are translating into
+ # doesn't allow you to compose a sentence in this fashion,
+ # consider translating as if this and the following few strings
+ # were "The commit message ${n} will be skipped:"
+ *1[0-9]|*[04-9]) eval_gettext "The \${n}th commit message will be skipped:";;
+ *1) eval_gettext "The \${n}st commit message will be skipped:";;
+ *2) eval_gettext "The \${n}nd commit message will be skipped:";;
+ *3) eval_gettext "The \${n}rd commit message will be skipped:";;
+ *) eval_gettext "The commit message \${n} will be skipped:";;
esac
}
@@ -413,20 +455,23 @@ update_squash_messages () {
if test -f "$squash_msg"; then
mv "$squash_msg" "$squash_msg".bak || exit
count=$(($(sed -n \
- -e "1s/^. This is a combination of \(.*\) commits\./\1/p" \
+ -e "1s/^$comment_char.*\([0-9][0-9]*\).*/\1/p" \
-e "q" < "$squash_msg".bak)+1))
{
- printf '%s\n' "$comment_char This is a combination of $count commits."
+ printf '%s\n' "$comment_char $(eval_ngettext \
+ "This is a combination of \$count commit." \
+ "This is a combination of \$count commits." \
+ $count)"
sed -e 1d -e '2,/^./{
/^$/d
}' <"$squash_msg".bak
} >"$squash_msg"
else
- commit_message HEAD > "$fixup_msg" || die "Cannot write $fixup_msg"
+ commit_message HEAD > "$fixup_msg" || die "$(gettext "Cannot write \$fixup_msg")"
count=2
{
- printf '%s\n' "$comment_char This is a combination of 2 commits."
- printf '%s\n' "$comment_char The first commit's message is:"
+ printf '%s\n' "$comment_char $(gettext "This is a combination of 2 commits.")"
+ printf '%s\n' "$comment_char $(gettext "This is the 1st commit message:")"
echo
cat "$fixup_msg"
} >"$squash_msg"
@@ -435,13 +480,13 @@ update_squash_messages () {
squash)
rm -f "$fixup_msg"
echo
- printf '%s\n' "$comment_char This is the $(nth_string $count) commit message:"
+ printf '%s\n' "$comment_char $(this_nth_commit_message $count)"
echo
commit_message $2
;;
fixup)
echo
- printf '%s\n' "$comment_char The $(nth_string $count) commit message will be skipped:"
+ printf '%s\n' "$comment_char $(skip_nth_commit_message $count)"
echo
# Change the space after the comment character to TAB:
commit_message $2 | git stripspace --comment-lines | sed -e 's/ / /'
@@ -460,12 +505,14 @@ peek_next_command () {
# messages, effectively causing the combined commit to be used as the
# new basis for any further squash/fixups. Args: sha1 rest
die_failed_squash() {
+ sha1=$1
+ rest=$2
mv "$squash_msg" "$msg" || exit
rm -f "$fixup_msg"
cp "$msg" "$GIT_DIR"/MERGE_MSG || exit
warn
- warn "Could not apply $1... $2"
- die_with_patch $1 ""
+ warn "$(eval_gettext "Could not apply \$sha1... \$rest")"
+ die_with_patch $sha1 ""
}
flush_rewritten_pending() {
@@ -489,6 +536,8 @@ record_in_rewritten() {
}
do_pick () {
+ sha1=$1
+ rest=$2
if test "$(git rev-parse HEAD)" = "$squash_onto"
then
# Set the correct commit message and author info on the
@@ -500,15 +549,15 @@ do_pick () {
# resolve before manually running git commit --amend then git
# rebase --continue.
git commit --allow-empty --allow-empty-message --amend \
- --no-post-rewrite -n -q -C $1 &&
- pick_one -n $1 &&
+ --no-post-rewrite -n -q -C $sha1 &&
+ pick_one -n $sha1 &&
git commit --allow-empty --allow-empty-message \
- --amend --no-post-rewrite -n -q -C $1 \
+ --amend --no-post-rewrite -n -q -C $sha1 \
${gpg_sign_opt:+"$gpg_sign_opt"} ||
- die_with_patch $1 "Could not apply $1... $2"
+ die_with_patch $sha1 "$(eval_gettext "Could not apply \$sha1... \$rest")"
else
- pick_one $1 ||
- die_with_patch $1 "Could not apply $1... $2"
+ pick_one $sha1 ||
+ die_with_patch $sha1 "$(eval_gettext "Could not apply \$sha1... \$rest")"
fi
}
@@ -536,10 +585,11 @@ do_next () {
mark_action_done
do_pick $sha1 "$rest"
git commit --amend --no-post-rewrite ${gpg_sign_opt:+"$gpg_sign_opt"} || {
- warn "Could not amend commit after successfully picking $sha1... $rest"
- warn "This is most likely due to an empty commit message, or the pre-commit hook"
- warn "failed. If the pre-commit hook failed, you may need to resolve the issue before"
- warn "you are able to reword the commit."
+ warn "$(eval_gettext "\
+Could not amend commit after successfully picking \$sha1... \$rest
+This is most likely due to an empty commit message, or the pre-commit hook
+failed. If the pre-commit hook failed, you may need to resolve the issue before
+you are able to reword the commit.")"
exit_with_patch $sha1 1
}
record_in_rewritten $sha1
@@ -549,7 +599,8 @@ do_next () {
mark_action_done
do_pick $sha1 "$rest"
- warn "Stopped at $sha1... $rest"
+ sha1_abbrev=$(git rev-parse --short $sha1)
+ warn "$(eval_gettext "Stopped at \$sha1_abbrev... \$rest")"
exit_with_patch $sha1 0
;;
squash|s|fixup|f)
@@ -564,7 +615,7 @@ do_next () {
comment_for_reflog $squash_style
test -f "$done" && has_action "$done" ||
- die "Cannot '$squash_style' without a previous commit"
+ die "$(eval_gettext "Cannot '\$squash_style' without a previous commit")"
mark_action_done
update_squash_messages $squash_style $sha1
@@ -606,7 +657,7 @@ do_next () {
x|"exec")
read -r command rest < "$todo"
mark_action_done
- printf 'Executing: %s\n' "$rest"
+ eval_gettextln "Executing: \$rest"
"${SHELL:-@SHELL_PATH@}" -c "$rest" # Actual execution
status=$?
# Run in subshell because require_clean_work_tree can die.
@@ -614,13 +665,14 @@ do_next () {
(require_clean_work_tree "rebase" 2>/dev/null) || dirty=t
if test "$status" -ne 0
then
- warn "Execution failed: $rest"
+ warn "$(eval_gettext "Execution failed: \$rest")"
test "$dirty" = f ||
- warn "and made changes to the index and/or the working tree"
+ warn "$(gettext "and made changes to the index and/or the working tree")"
- warn "You can fix the problem, and then run"
- warn
- warn " git rebase --continue"
+ warn "$(gettext "\
+You can fix the problem, and then run
+
+ git rebase --continue")"
warn
if test $status -eq 127 # command not found
then
@@ -629,18 +681,20 @@ do_next () {
exit "$status"
elif test "$dirty" = t
then
- warn "Execution succeeded: $rest"
- warn "but left changes to the index and/or the working tree"
- warn "Commit or stash your changes, and then run"
- warn
- warn " git rebase --continue"
+ # TRANSLATORS: after these lines is a command to be issued by the user
+ warn "$(eval_gettext "\
+Execution succeeded: \$rest
+but left changes to the index and/or the working tree
+Commit or stash your changes, and then run
+
+ git rebase --continue")"
warn
exit 1
fi
;;
*)
- warn "Unknown command: $command $sha1 $rest"
- fixtodo="Please fix this using 'git rebase --edit-todo'."
+ warn "$(eval_gettext "Unknown command: \$command \$sha1 \$rest")"
+ fixtodo="$(gettext "Please fix this using 'git rebase --edit-todo'.")"
if git rev-parse --verify -q "$sha1" >/dev/null
then
die_with_patch $sha1 "$fixtodo"
@@ -675,7 +729,7 @@ do_next () {
"$hook" rebase < "$rewritten_list"
true # we don't care if this hook failed
fi &&
- warn "Successfully rebased and updated $head_name."
+ warn "$(eval_gettext "Successfully rebased and updated \$head_name.")"
return 1 # not failure; just to break the do_rest loop
}
@@ -722,7 +776,7 @@ skip_unnecessary_picks () {
record_in_rewritten "$onto"
;;
esac ||
- die "Could not skip unnecessary pick commands"
+ die "$(gettext "Could not skip unnecessary pick commands")"
}
transform_todo_ids () {
@@ -866,12 +920,12 @@ add_exec_commands () {
# $3: the input filename
check_commit_sha () {
badsha=0
- if test -z $1
+ if test -z "$1"
then
badsha=1
else
sha1_verif="$(git rev-parse --verify --quiet $1^{commit})"
- if test -z $sha1_verif
+ if test -z "$sha1_verif"
then
badsha=1
fi
@@ -880,9 +934,9 @@ check_commit_sha () {
if test $badsha -ne 0
then
line="$(sed -n -e "${2}p" "$3")"
- warn "Warning: the SHA-1 is missing or isn't" \
- "a commit in the following line:"
- warn " - $line"
+ warn "$(eval_gettext "\
+Warning: the SHA-1 is missing or isn't a commit in the following line:
+ - \$line")"
warn
fi
@@ -913,9 +967,9 @@ check_bad_cmd_and_sha () {
;;
*)
line="$(sed -n -e "${lineno}p" "$1")"
- warn "Warning: the command isn't recognized" \
- "in the following line:"
- warn " - $line"
+ warn "$(eval_gettext "\
+Warning: the command isn't recognized in the following line:
+ - \$line")"
warn
retval=1
;;
@@ -952,7 +1006,7 @@ warn_lines () {
# Switch to the branch in $into and notify it in the reflog
checkout_onto () {
GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name"
- output git checkout $onto || die_abort "could not detach HEAD"
+ output git checkout $onto || die_abort "$(gettext "could not detach HEAD")"
git update-ref ORIG_HEAD $orig_head
}
@@ -990,28 +1044,26 @@ check_todo_list () {
then
test "$check_level" = error && raise_error=t
- warn "Warning: some commits may have been dropped" \
- "accidentally."
- warn "Dropped commits (newer to older):"
+ warn "$(gettext "\
+Warning: some commits may have been dropped accidentally.
+Dropped commits (newer to older):")"
# Make the list user-friendly and display
opt="--no-walk=sorted --format=oneline --abbrev-commit --stdin"
git rev-list $opt <"$todo".miss | warn_lines
- warn "To avoid this message, use \"drop\" to" \
- "explicitly remove a commit."
- warn
- warn "Use 'git config rebase.missingCommitsCheck' to change" \
- "the level of warnings."
- warn "The possible behaviours are: ignore, warn, error."
+ warn "$(gettext "\
+To avoid this message, use \"drop\" to explicitly remove a commit.
+
+Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
+The possible behaviours are: ignore, warn, error.")"
warn
fi
;;
ignore)
;;
*)
- warn "Unrecognized setting $check_level for option" \
- "rebase.missingCommitsCheck. Ignoring."
+ warn "$(eval_gettext "Unrecognized setting \$check_level for option rebase.missingCommitsCheck. Ignoring.")"
;;
esac
@@ -1028,8 +1080,8 @@ check_todo_list () {
# placed before the commit of the next action
checkout_onto
- warn "You can fix this with 'git rebase --edit-todo'."
- die "Or you can abort the rebase with 'git rebase --abort'."
+ warn "$(gettext "You can fix this with 'git rebase --edit-todo'.")"
+ die "$(gettext "Or you can abort the rebase with 'git rebase --abort'.")"
fi
}
@@ -1038,8 +1090,8 @@ check_todo_list () {
# below were not inside any function, and expected to return
# to the function that dot-sourced us.
#
-# However, FreeBSD /bin/sh misbehaves on such a construct and
-# continues to run the statements that follow such a "return".
+# However, older (9.x) versions of FreeBSD /bin/sh misbehave on such a
+# construct and continue to run the statements that follow such a "return".
# As a work-around, we introduce an extra layer of a function
# here, and immediately call it after defining it.
git_rebase__interactive () {
@@ -1053,41 +1105,43 @@ continue)
test ! -f "$GIT_DIR"/CHERRY_PICK_HEAD ||
rm "$GIT_DIR"/CHERRY_PICK_HEAD ||
- die "Could not remove CHERRY_PICK_HEAD"
+ die "$(gettext "Could not remove CHERRY_PICK_HEAD")"
else
if ! test -f "$author_script"
then
gpg_sign_opt_quoted=${gpg_sign_opt:+$(git rev-parse --sq-quote "$gpg_sign_opt")}
- die "You have staged changes in your working tree. If these changes are meant to be
+ die "$(eval_gettext "\
+You have staged changes in your working tree.
+If these changes are meant to be
squashed into the previous commit, run:
- git commit --amend $gpg_sign_opt_quoted
+ git commit --amend \$gpg_sign_opt_quoted
If they are meant to go into a new commit, run:
- git commit $gpg_sign_opt_quoted
+ git commit \$gpg_sign_opt_quoted
In both case, once you're done, continue with:
git rebase --continue
-"
+")"
fi
. "$author_script" ||
- die "Error trying to find the author identity to amend commit"
+ die "$(gettext "Error trying to find the author identity to amend commit")"
if test -f "$amend"
then
current_head=$(git rev-parse --verify HEAD)
test "$current_head" = $(cat "$amend") ||
- die "\
-You have uncommitted changes in your working tree. Please, commit them
-first and then run 'git rebase --continue' again."
+ die "$(gettext "\
+You have uncommitted changes in your working tree. Please commit them
+first and then run 'git rebase --continue' again.")"
do_with_author git commit --amend --no-verify -F "$msg" -e \
${gpg_sign_opt:+"$gpg_sign_opt"} ||
- die "Could not commit staged changes."
+ die "$(gettext "Could not commit staged changes.")"
else
do_with_author git commit --no-verify -F "$msg" -e \
${gpg_sign_opt:+"$gpg_sign_opt"} ||
- die "Could not commit staged changes."
+ die "$(gettext "Could not commit staged changes.")"
fi
fi
@@ -1111,16 +1165,15 @@ edit-todo)
mv -f "$todo".new "$todo"
collapse_todo_ids
append_todo_help
- git stripspace --comment-lines >>"$todo" <<\EOF
-
+ gettext "
You are editing the todo file of an ongoing interactive rebase.
To continue rebase after editing, run:
git rebase --continue
-EOF
+" | git stripspace --comment-lines >>"$todo"
git_sequence_editor "$todo" ||
- die "Could not execute editor"
+ die "$(gettext "Could not execute editor")"
expand_todo_ids
exit
@@ -1128,7 +1181,7 @@ EOF
esac
git var GIT_COMMITTER_IDENT >/dev/null ||
- die "You need to set your committer info first"
+ die "$(gettext "You need to set your committer info first")"
comment_for_reflog start
@@ -1136,15 +1189,15 @@ if test ! -z "$switch_to"
then
GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $switch_to"
output git checkout "$switch_to" -- ||
- die "Could not checkout $switch_to"
+ die "$(eval_gettext "Could not checkout \$switch_to")"
comment_for_reflog start
fi
-orig_head=$(git rev-parse --verify HEAD) || die "No HEAD?"
-mkdir -p "$state_dir" || die "Could not create temporary $state_dir"
+orig_head=$(git rev-parse --verify HEAD) || die "$(gettext "No HEAD?")"
+mkdir -p "$state_dir" || die "$(eval_gettext "Could not create temporary \$state_dir")"
-: > "$state_dir"/interactive || die "Could not mark as interactive"
+: > "$state_dir"/interactive || die "$(gettext "Could not mark as interactive")"
write_basic_state
if test t = "$preserve_merges"
then
@@ -1154,12 +1207,12 @@ then
for c in $(git merge-base --all $orig_head $upstream)
do
echo $onto > "$rewritten"/$c ||
- die "Could not init rewritten commits"
+ die "$(gettext "Could not init rewritten commits")"
done
else
mkdir "$rewritten" &&
echo $onto > "$rewritten"/root ||
- die "Could not init rewritten commits"
+ die "$(gettext "Could not init rewritten commits")"
fi
# No cherry-pick because our first pass is to determine
# parents to rewrite and skipping dropped commits would
@@ -1258,18 +1311,20 @@ todocount=${todocount##* }
cat >>"$todo" <<EOF
-$comment_char Rebase $shortrevisions onto $shortonto ($todocount command(s))
+$comment_char $(eval_ngettext \
+ "Rebase \$shortrevisions onto \$shortonto (\$todocount command)" \
+ "Rebase \$shortrevisions onto \$shortonto (\$todocount commands)" \
+ "$todocount")
EOF
append_todo_help
-git stripspace --comment-lines >>"$todo" <<\EOF
-
+gettext "
However, if you remove everything, the rebase will be aborted.
-EOF
+" | git stripspace --comment-lines >>"$todo"
if test -z "$keep_empty"
then
- printf '%s\n' "$comment_char Note that empty commits are commented out" >>"$todo"
+ printf '%s\n' "$comment_char $(gettext "Note that empty commits are commented out")" >>"$todo"
fi
@@ -1279,7 +1334,7 @@ has_action "$todo" ||
cp "$todo" "$todo".backup
collapse_todo_ids
git_sequence_editor "$todo" ||
- die_abort "Could not execute editor"
+ die_abort "$(gettext "Could not execute editor")"
has_action "$todo" ||
return 2
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 15:51:42 +0000