diff options
Diffstat (limited to 'git-rebase--interactive.sh')
| -rw-r--r-- | git-rebase--interactive.sh | 373 |
1 files changed, 40 insertions, 333 deletions
diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh index 29b7e8824b..2563dc52da 100644 --- a/git-rebase--interactive.sh +++ b/git-rebase--interactive.sh @@ -155,13 +155,13 @@ reschedule_last_action () { append_todo_help () { gettext " Commands: - p, pick = use commit - r, reword = use commit, but edit the commit message - e, edit = use commit, but stop for amending - s, squash = use commit, but meld into previous commit - f, fixup = like \"squash\", but discard this commit's log message - x, exec = run command (the rest of the line) using shell - d, drop = remove commit +p, pick = use commit +r, reword = use commit, but edit the commit message +e, edit = use commit, but stop for amending +s, squash = use commit, but meld into previous commit +f, fixup = like \"squash\", but discard this commit's log message +x, exec = run command (the rest of the line) using shell +d, drop = remove commit These lines can be re-ordered; they are executed from top to bottom. " | git stripspace --comment-lines >>"$todo" @@ -714,154 +714,12 @@ do_rest () { done } -# skip picking commits whose parents are unchanged -skip_unnecessary_picks () { - fd=3 - while read -r command rest - do - # fd=3 means we skip the command - case "$fd,$command" in - 3,pick|3,p) - # pick a commit whose parent is current $onto -> skip - sha1=${rest%% *} - case "$(git rev-parse --verify --quiet "$sha1"^)" in - "$onto"*) - onto=$sha1 - ;; - *) - fd=1 - ;; - esac - ;; - 3,"$comment_char"*|3,) - # copy comments - ;; - *) - fd=1 - ;; - esac - printf '%s\n' "$command${rest:+ }$rest" >&$fd - done <"$todo" >"$todo.new" 3>>"$done" && - mv -f "$todo".new "$todo" && - case "$(peek_next_command)" in - squash|s|fixup|f) - record_in_rewritten "$onto" - ;; - esac || - die "$(gettext "Could not skip unnecessary pick commands")" -} - -transform_todo_ids () { - while read -r command rest - do - case "$command" in - "$comment_char"* | exec) - # Be careful for oddball commands like 'exec' - # that do not have a SHA-1 at the beginning of $rest. - ;; - *) - sha1=$(git rev-parse --verify --quiet "$@" ${rest%%[ ]*}) && - rest="$sha1 ${rest#*[ ]}" - ;; - esac - printf '%s\n' "$command${rest:+ }$rest" - done <"$todo" >"$todo.new" && - mv -f "$todo.new" "$todo" -} - expand_todo_ids() { - transform_todo_ids + git rebase--helper --expand-ids } collapse_todo_ids() { - transform_todo_ids --short -} - -# Rearrange the todo list that has both "pick sha1 msg" and -# "pick sha1 fixup!/squash! msg" appears in it so that the latter -# comes immediately after the former, and change "pick" to -# "fixup"/"squash". -# -# Note that if the config has specified a custom instruction format -# each log message will be re-retrieved in order to normalize the -# autosquash arrangement -rearrange_squash () { - # extract fixup!/squash! lines and resolve any referenced sha1's - while read -r pick sha1 message - do - test -z "${format}" || message=$(git log -n 1 --format="%s" ${sha1}) - case "$message" in - "squash! "*|"fixup! "*) - action="${message%%!*}" - rest=$message - prefix= - # skip all squash! or fixup! (but save for later) - while : - do - case "$rest" in - "squash! "*|"fixup! "*) - prefix="$prefix${rest%%!*}," - rest="${rest#*! }" - ;; - *) - break - ;; - esac - done - printf '%s %s %s %s\n' "$sha1" "$action" "$prefix" "$rest" - # if it's a single word, try to resolve to a full sha1 and - # emit a second copy. This allows us to match on both message - # and on sha1 prefix - if test "${rest#* }" = "$rest"; then - fullsha="$(git rev-parse -q --verify "$rest" 2>/dev/null)" - if test -n "$fullsha"; then - # prefix the action to uniquely identify this line as - # intended for full sha1 match - echo "$sha1 +$action $prefix $fullsha" - fi - fi - esac - done >"$1.sq" <"$1" - test -s "$1.sq" || return - - used= - while read -r pick sha1 message - do - case " $used" in - *" $sha1 "*) continue ;; - esac - printf '%s\n' "$pick $sha1 $message" - test -z "${format}" || message=$(git log -n 1 --format="%s" ${sha1}) - used="$used$sha1 " - while read -r squash action msg_prefix msg_content - do - case " $used" in - *" $squash "*) continue ;; - esac - emit=0 - case "$action" in - +*) - action="${action#+}" - # full sha1 prefix test - case "$msg_content" in "$sha1"*) emit=1;; esac ;; - *) - # message prefix test - case "$message" in "$msg_content"*) emit=1;; esac ;; - esac - if test $emit = 1; then - if test -n "${format}" - then - msg_content=$(git log -n 1 --format="${format}" ${squash}) - else - msg_content="$(echo "$msg_prefix" | sed "s/,/! /g")$msg_content" - fi - printf '%s\n' "$action $squash $msg_content" - used="$used$squash " - fi - done <"$1.sq" - done >"$1.rearranged" <"$1" - cat "$1.rearranged" >"$1" - rm -f "$1.sq" "$1.rearranged" + git rebase--helper --shorten-ids } # Add commands after a pick or after a squash/fixup serie @@ -885,96 +743,6 @@ add_exec_commands () { mv "$1.new" "$1" } -# Check if the SHA-1 passed as an argument is a -# correct one, if not then print $2 in "$todo".badsha -# $1: the SHA-1 to test -# $2: the line number of the input -# $3: the input filename -check_commit_sha () { - badsha=0 - if test -z "$1" - then - badsha=1 - else - sha1_verif="$(git rev-parse --verify --quiet $1^{commit})" - if test -z "$sha1_verif" - then - badsha=1 - fi - fi - - if test $badsha -ne 0 - then - line="$(sed -n -e "${2}p" "$3")" - warn "$(eval_gettext "\ -Warning: the SHA-1 is missing or isn't a commit in the following line: - - \$line")" - warn - fi - - return $badsha -} - -# prints the bad commits and bad commands -# from the todolist in stdin -check_bad_cmd_and_sha () { - retval=0 - lineno=0 - while read -r command rest - do - lineno=$(( $lineno + 1 )) - case $command in - "$comment_char"*|''|noop|x|exec) - # Doesn't expect a SHA-1 - ;; - "$cr") - # Work around CR left by "read" (e.g. with Git for - # Windows' Bash). - ;; - pick|p|drop|d|reword|r|edit|e|squash|s|fixup|f) - if ! check_commit_sha "${rest%%[ ]*}" "$lineno" "$1" - then - retval=1 - fi - ;; - *) - line="$(sed -n -e "${lineno}p" "$1")" - warn "$(eval_gettext "\ -Warning: the command isn't recognized in the following line: - - \$line")" - warn - retval=1 - ;; - esac - done <"$1" - return $retval -} - -# Print the list of the SHA-1 of the commits -# from stdin to stdout -todo_list_to_sha_list () { - git stripspace --strip-comments | - while read -r command sha1 rest - do - case $command in - "$comment_char"*|''|noop|x|"exec") - ;; - *) - long_sha=$(git rev-list --no-walk "$sha1" 2>/dev/null) - printf "%s\n" "$long_sha" - ;; - esac - done -} - -# Use warn for each line in stdin -warn_lines () { - while read -r line - do - warn " - $line" - done -} - # Switch to the branch in $into and notify it in the reflog checkout_onto () { GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name" @@ -989,74 +757,6 @@ get_missing_commit_check_level () { printf '%s' "$check_level" | tr 'A-Z' 'a-z' } -# Check if the user dropped some commits by mistake -# Behaviour determined by rebase.missingCommitsCheck. -# Check if there is an unrecognized command or a -# bad SHA-1 in a command. -check_todo_list () { - raise_error=f - - check_level=$(get_missing_commit_check_level) - - case "$check_level" in - warn|error) - # Get the SHA-1 of the commits - todo_list_to_sha_list <"$todo".backup >"$todo".oldsha1 - todo_list_to_sha_list <"$todo" >"$todo".newsha1 - - # Sort the SHA-1 and compare them - sort -u "$todo".oldsha1 >"$todo".oldsha1+ - mv "$todo".oldsha1+ "$todo".oldsha1 - sort -u "$todo".newsha1 >"$todo".newsha1+ - mv "$todo".newsha1+ "$todo".newsha1 - comm -2 -3 "$todo".oldsha1 "$todo".newsha1 >"$todo".miss - - # Warn about missing commits - if test -s "$todo".miss - then - test "$check_level" = error && raise_error=t - - warn "$(gettext "\ -Warning: some commits may have been dropped accidentally. -Dropped commits (newer to older):")" - - # Make the list user-friendly and display - opt="--no-walk=sorted --format=oneline --abbrev-commit --stdin" - git rev-list $opt <"$todo".miss | warn_lines - - warn "$(gettext "\ -To avoid this message, use \"drop\" to explicitly remove a commit. - -Use 'git config rebase.missingCommitsCheck' to change the level of warnings. -The possible behaviours are: ignore, warn, error.")" - warn - fi - ;; - ignore) - ;; - *) - warn "$(eval_gettext "Unrecognized setting \$check_level for option rebase.missingCommitsCheck. Ignoring.")" - ;; - esac - - if ! check_bad_cmd_and_sha "$todo" - then - raise_error=t - fi - - if test $raise_error = t - then - # Checkout before the first commit of the - # rebase: this way git rebase --continue - # will work correctly as it expects HEAD to be - # placed before the commit of the next action - checkout_onto - - warn "$(gettext "You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.")" - die "$(gettext "Or you can abort the rebase with 'git rebase --abort'.")" - fi -} - # The whole contents of this file is run by dot-sourcing it from # inside a shell function. It used to be that "return"s we see # below were not inside any function, and expected to return @@ -1211,26 +911,27 @@ else revisions=$onto...$orig_head shortrevisions=$shorthead fi -format=$(git config --get rebase.instructionFormat) -# the 'rev-list .. | sed' requires %m to parse; the instruction requires %H to parse -git rev-list $merges_option --format="%m%H ${format:-%s}" \ - --reverse --left-right --topo-order \ - $revisions ${restrict_revision+^$restrict_revision} | \ - sed -n "s/^>//p" | -while read -r sha1 rest -do - - if test -z "$keep_empty" && is_empty_commit $sha1 && ! is_merge_commit $sha1 - then - comment_out="$comment_char " - else - comment_out= - fi +if test t != "$preserve_merges" +then + git rebase--helper --make-script ${keep_empty:+--keep-empty} \ + $revisions ${restrict_revision+^$restrict_revision} >"$todo" +else + format=$(git config --get rebase.instructionFormat) + # the 'rev-list .. | sed' requires %m to parse; the instruction requires %H to parse + git rev-list $merges_option --format="%m%H ${format:-%s}" \ + --reverse --left-right --topo-order \ + $revisions ${restrict_revision+^$restrict_revision} | \ + sed -n "s/^>//p" | + while read -r sha1 rest + do + + if test -z "$keep_empty" && is_empty_commit $sha1 && ! is_merge_commit $sha1 + then + comment_out="$comment_char " + else + comment_out= + fi - if test t != "$preserve_merges" - then - printf '%s\n' "${comment_out}pick $sha1 $rest" >>"$todo" - else if test -z "$rebase_root" then preserve=t @@ -1249,8 +950,8 @@ do touch "$rewritten"/$sha1 printf '%s\n' "${comment_out}pick $sha1 $rest" >>"$todo" fi - fi -done + done +fi # Watch for commits that been dropped by --cherry-pick if test t = "$preserve_merges" @@ -1280,7 +981,7 @@ then fi test -s "$todo" || echo noop >> "$todo" -test -n "$autosquash" && rearrange_squash "$todo" +test -z "$autosquash" || git rebase--helper --rearrange-squash || exit test -n "$cmd" && add_exec_commands "$todo" todocount=$(git stripspace --strip-comments <"$todo" | wc -l) @@ -1316,11 +1017,17 @@ git_sequence_editor "$todo" || has_action "$todo" || return 2 -check_todo_list +git rebase--helper --check-todo-list || { + ret=$? + checkout_onto + exit $ret +} expand_todo_ids -test -d "$rewritten" || test -n "$force_rebase" || skip_unnecessary_picks +test -d "$rewritten" || test -n "$force_rebase" || +onto="$(git rebase--helper --skip-unnecessary-picks)" || +die "Could not skip unnecessary pick commands" checkout_onto if test -z "$rebase_root" && test ! -d "$rewritten" |