diff options
Diffstat (limited to 'git-pull.sh')
| -rwxr-xr-x | git-pull.sh | 191 |
1 files changed, 139 insertions, 52 deletions
diff --git a/git-pull.sh b/git-pull.sh index 25adddfddf..38331a8611 100755 --- a/git-pull.sh +++ b/git-pull.sh @@ -13,10 +13,33 @@ set_reflog_action "pull $*" require_work_tree cd_to_toplevel -test -z "$(git ls-files -u)" || - die "You are in the middle of a conflicted merge." -strategy_args= no_stat= no_commit= squash= no_ff= log_arg= verbosity= +die_conflict () { + git diff-index --cached --name-status -r --ignore-submodules HEAD -- + if [ $(git config --bool --get advice.resolveConflict || echo true) = "true" ]; then + die "Pull is not possible because you have unmerged files. +Please, fix them up in the work tree, and then use 'git add/rm <file>' +as appropriate to mark resolution, or use 'git commit -a'." + else + die "Pull is not possible because you have unmerged files." + fi +} + +die_merge () { + if [ $(git config --bool --get advice.resolveConflict || echo true) = "true" ]; then + die "You have not concluded your merge (MERGE_HEAD exists). +Please, commit your changes before you can merge." + else + die "You have not concluded your merge (MERGE_HEAD exists)." + fi +} + +test -z "$(git ls-files -u)" || die_conflict +test -f "$GIT_DIR/MERGE_HEAD" && die_merge + +strategy_args= diffstat= no_commit= squash= no_ff= ff_only= +log_arg= verbosity= +merge_args= curr_branch=$(git symbolic-ref -q HEAD) curr_branch_short=$(echo "$curr_branch" | sed "s|refs/heads/||") rebase=$(git config --bool branch.$curr_branch_short.rebase) @@ -28,9 +51,9 @@ do -v|--verbose) verbosity="$verbosity -v" ;; -n|--no-stat|--no-summary) - no_stat=-n ;; + diffstat=--no-stat ;; --stat|--summary) - no_stat=$1 ;; + diffstat=--stat ;; --log|--no-log) log_arg=$1 ;; --no-c|--no-co|--no-com|--no-comm|--no-commi|--no-commit) @@ -45,6 +68,8 @@ do no_ff=--ff ;; --no-ff) no_ff=--no-ff ;; + --ff-only) + ff_only=--ff-only ;; -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\ --strateg=*|--strategy=*|\ -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy) @@ -59,6 +84,18 @@ do esac strategy_args="${strategy_args}-s $strategy " ;; + -X*) + case "$#,$1" in + 1,-X) + usage ;; + *,-X) + xx="-X $(git rev-parse --sq-quote "$2")" + shift ;; + *,*) + xx=$(git rev-parse --sq-quote "$1") ;; + esac + merge_args="$merge_args$xx " + ;; -r|--r|--re|--reb|--reba|--rebas|--rebase) rebase=true ;; @@ -88,41 +125,93 @@ error_on_no_merge_candidates () { esac done + if test true = "$rebase" + then + op_type=rebase + op_prep=against + else + op_type=merge + op_prep=with + fi + curr_branch=${curr_branch#refs/heads/} + upstream=$(git config "branch.$curr_branch.merge") + remote=$(git config "branch.$curr_branch.remote") - echo "You asked me to pull without telling me which branch you" - echo "want to merge with, and 'branch.${curr_branch}.merge' in" - echo "your configuration file does not tell me either. Please" - echo "name which branch you want to merge on the command line and" - echo "try again (e.g. 'git pull <repository> <refspec>')." - echo "See git-pull(1) for details on the refspec." - echo - echo "If you often merge with the same branch, you may want to" - echo "configure the following variables in your configuration" - echo "file:" - echo - echo " branch.${curr_branch}.remote = <nickname>" - echo " branch.${curr_branch}.merge = <remote-ref>" - echo " remote.<nickname>.url = <url>" - echo " remote.<nickname>.fetch = <refspec>" - echo - echo "See git-config(1) for details." + if [ $# -gt 1 ]; then + if [ "$rebase" = true ]; then + printf "There is no candidate for rebasing against " + else + printf "There are no candidates for merging " + fi + echo "among the refs that you just fetched." + echo "Generally this means that you provided a wildcard refspec which had no" + echo "matches on the remote end." + elif [ $# -gt 0 ] && [ "$1" != "$remote" ]; then + echo "You asked to pull from the remote '$1', but did not specify" + echo "a branch. Because this is not the default configured remote" + echo "for your current branch, you must specify a branch on the command line." + elif [ -z "$curr_branch" ]; then + echo "You are not currently on a branch, so I cannot use any" + echo "'branch.<branchname>.merge' in your configuration file." + echo "Please specify which remote branch you want to use on the command" + echo "line and try again (e.g. 'git pull <repository> <refspec>')." + echo "See git-pull(1) for details." + elif [ -z "$upstream" ]; then + echo "You asked me to pull without telling me which branch you" + echo "want to $op_type $op_prep, and 'branch.${curr_branch}.merge' in" + echo "your configuration file does not tell me, either. Please" + echo "specify which branch you want to use on the command line and" + echo "try again (e.g. 'git pull <repository> <refspec>')." + echo "See git-pull(1) for details." + echo + echo "If you often $op_type $op_prep the same branch, you may want to" + echo "use something like the following in your configuration file:" + echo + echo " [branch \"${curr_branch}\"]" + echo " remote = <nickname>" + echo " merge = <remote-ref>" + test rebase = "$op_type" && + echo " rebase = true" + echo + echo " [remote \"<nickname>\"]" + echo " url = <url>" + echo " fetch = <refspec>" + echo + echo "See git-config(1) for details." + else + echo "Your configuration specifies to $op_type $op_prep the ref '${upstream#refs/heads/}'" + echo "from the remote, but no such ref was fetched." + fi exit 1 } test true = "$rebase" && { - git update-index --ignore-submodules --refresh && - git diff-files --ignore-submodules --quiet && - git diff-index --ignore-submodules --cached --quiet HEAD -- || - die "refusing to pull with rebase: your working tree is not up-to-date" - + if ! git rev-parse -q --verify HEAD >/dev/null + then + # On an unborn branch + if test -f "$GIT_DIR/index" + then + die "updating an unborn branch with changes added to the index" + fi + else + git update-index --ignore-submodules --refresh && + git diff-files --ignore-submodules --quiet && + git diff-index --ignore-submodules --cached --quiet HEAD -- || + die "refusing to pull with rebase: your working tree is not up-to-date" + fi + oldremoteref= && . git-parse-remote && - origin="$1" - test -z "$origin" && origin=$(get_default_remote) - reflist="$(get_remote_refs_for_fetch "$@" 2>/dev/null | - sed "s|refs/heads/\(.*\):|\1|")" && - oldremoteref="$(git rev-parse -q --verify \ - "refs/remotes/$origin/$reflist")" + remoteref="$(get_remote_merge_branch "$@" 2>/dev/null)" && + oldremoteref="$(git rev-parse -q --verify "$remoteref")" && + for reflog in $(git rev-list -g $remoteref 2>/dev/null) + do + if test "$reflog" = "$(git merge-base $reflog $curr_branch)" + then + oldremoteref="$reflog" + break + fi + done } orig_head=$(git rev-parse -q --verify HEAD) git fetch $verbosity --update-head-ok "$@" || exit 1 @@ -137,9 +226,9 @@ then # First update the working tree to match $curr_head. echo >&2 "Warning: fetch updated the current branch head." - echo >&2 "Warning: fast forwarding your working tree from" + echo >&2 "Warning: fast-forwarding your working tree from" echo >&2 "Warning: commit $orig_head." - git update-index --refresh 2>/dev/null + git update-index -q --refresh git read-tree -u -m "$orig_head" "$curr_head" || die 'Cannot fast-forward your working tree. After making sure that you saved anything precious from @@ -156,25 +245,16 @@ merge_head=$(sed -e '/ not-for-merge /d' \ case "$merge_head" in '') - case $? in - 0) error_on_no_merge_candidates "$@";; - 1) echo >&2 "You are not currently on a branch; you must explicitly" - echo >&2 "specify which branch you wish to merge:" - echo >&2 " git pull <remote> <branch>" - exit 1;; - *) exit $?;; - esac + error_on_no_merge_candidates "$@" ;; ?*' '?*) if test -z "$orig_head" then - echo >&2 "Cannot merge multiple branches into empty head" - exit 1 + die "Cannot merge multiple branches into empty head" fi if test true = "$rebase" then - echo >&2 "Cannot rebase onto multiple branches" - exit 1 + die "Cannot rebase onto multiple branches" fi ;; esac @@ -187,8 +267,15 @@ then fi merge_name=$(git fmt-merge-msg $log_arg <"$GIT_DIR/FETCH_HEAD") || exit -test true = "$rebase" && - exec git-rebase $strategy_args --onto $merge_head \ - ${oldremoteref:-$merge_head} -exec git-merge $no_stat $no_commit $squash $no_ff $log_arg $strategy_args \ - "$merge_name" HEAD $merge_head $verbosity +case "$rebase" in +true) + eval="git-rebase $diffstat $strategy_args $merge_args" + eval="$eval --onto $merge_head ${oldremoteref:-$merge_head}" + ;; +*) + eval="git-merge $diffstat $no_commit $squash $no_ff $ff_only" + eval="$eval $log_arg $strategy_args $merge_args" + eval="$eval \"\$merge_name\" HEAD $merge_head $verbosity" + ;; +esac +eval "exec $eval" |