1 files changed, 198 insertions, 182 deletions

diff --git a/git-bisect.sh b/git-bisect.sh
index b2186a8627..2524060475 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -2,50 +2,56 @@
 
 USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]'
 LONG_USAGE='git bisect help
-        print this long help message.
-git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
-        reset bisect state and start bisection.
+	print this long help message.
+git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
+	reset bisect state and start bisection.
 git bisect bad [<rev>]
-        mark <rev> a known-bad revision.
+	mark <rev> a known-bad revision.
 git bisect good [<rev>...]
-        mark <rev>... known-good revisions.
+	mark <rev>... known-good revisions.
 git bisect skip [(<rev>|<range>)...]
-        mark <rev>... untestable revisions.
+	mark <rev>... untestable revisions.
 git bisect next
-        find next bisection to test and check it out.
+	find next bisection to test and check it out.
 git bisect reset [<commit>]
-        finish bisection search and go back to commit.
+	finish bisection search and go back to commit.
 git bisect visualize
-        show bisect status in gitk.
+	show bisect status in gitk.
 git bisect replay <logfile>
-        replay bisection log.
+	replay bisection log.
 git bisect log
-        show bisect log.
+	show bisect log.
 git bisect run <cmd>...
-        use <cmd>... to automatically bisect.
+	use <cmd>... to automatically bisect.
 
 Please use "git help bisect" to get the full man page.'
 
 OPTIONS_SPEC=
 . git-sh-setup
 . git-sh-i18n
-require_work_tree
 
 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
 
+bisect_head()
+{
+	if test -f "$GIT_DIR/BISECT_HEAD"
+	then
+		echo BISECT_HEAD
+	else
+		echo HEAD
+	fi
+}
+
 bisect_autostart() {
 	test -s "$GIT_DIR/BISECT_START" || {
-		(
-			gettext "You need to start by \"git bisect start\"" &&
-			echo
-		) >&2
+		gettextln "You need to start by \"git bisect start\"" >&2
 		if test -t 0
 		then
 			# TRANSLATORS: Make sure to include [Y] and [n] in your
 			# translation. The program will only accept English input
 			# at this point.
-	    gettext "Do you want me to do it for you [Y/n]? " >&2
+			gettext "Do you want me to do it for you [Y/n]? " >&2
 			read yesno
 			case "$yesno" in
 			[Nn]*)
@@ -60,6 +66,50 @@ bisect_autostart() {
 
 bisect_start() {
 	#
+	# Check for one bad and then some good revisions.
+	#
+	has_double_dash=0
+	for arg; do
+		case "$arg" in --) has_double_dash=1; break ;; esac
+	done
+	orig_args=$(git rev-parse --sq-quote "$@")
+	bad_seen=0
+	eval=''
+	if test "z$(git rev-parse --is-bare-repository)" != zfalse
+	then
+		mode=--no-checkout
+	else
+		mode=''
+	fi
+	while [ $# -gt 0 ]; do
+		arg="$1"
+		case "$arg" in
+		--)
+			shift
+			break
+		;;
+		--no-checkout)
+			mode=--no-checkout
+			shift ;;
+		--*)
+			die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
+		*)
+			rev=$(git rev-parse -q --verify "$arg^{commit}") || {
+				test $has_double_dash -eq 1 &&
+				die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
+				break
+			}
+			case $bad_seen in
+			0) state='bad' ; bad_seen=1 ;;
+			*) state='good' ;;
+			esac
+			eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
+			shift
+			;;
+		esac
+	done
+
+	#
 	# Verify HEAD.
 	#
 	head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
@@ -74,7 +124,10 @@ bisect_start() {
 	then
 		# Reset to the rev from where we started.
 		start_head=$(cat "$GIT_DIR/BISECT_START")
-		git checkout "$start_head" -- || exit
+		if test "z$mode" != "z--no-checkout"
+		then
+			git checkout "$start_head" --
+		fi
 	else
 		# Get rev from where we start.
 		case "$head" in
@@ -98,39 +151,6 @@ bisect_start() {
 	bisect_clean_state || exit
 
 	#
-	# Check for one bad and then some good revisions.
-	#
-	has_double_dash=0
-	for arg; do
-	    case "$arg" in --) has_double_dash=1; break ;; esac
-	done
-	orig_args=$(git rev-parse --sq-quote "$@")
-	bad_seen=0
-	eval=''
-	while [ $# -gt 0 ]; do
-	    arg="$1"
-	    case "$arg" in
-	    --)
-		shift
-		break
-		;;
-	    *)
-		rev=$(git rev-parse -q --verify "$arg^{commit}") || {
-		    test $has_double_dash -eq 1 &&
-			die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
-		    break
-		}
-		case $bad_seen in
-		0) state='bad' ; bad_seen=1 ;;
-		*) state='good' ;;
-		esac
-		eval="$eval bisect_write '$state' '$rev' 'nolog'; "
-		shift
-		;;
-	    esac
-	done
-
-	#
 	# Change state.
 	# In case of mistaken revs or checkout error, or signals received,
 	# "bisect_auto_next" below may exit or misbehave.
@@ -143,9 +163,12 @@ bisect_start() {
 	#
 	# Write new start state.
 	#
-	echo "$start_head" >"$GIT_DIR/BISECT_START" &&
+	echo "$start_head" >"$GIT_DIR/BISECT_START" && {
+		test "z$mode" != "z--no-checkout" ||
+		git update-ref --no-deref BISECT_HEAD "$start_head"
+	} &&
 	git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
-	eval "$eval" &&
+	eval "$eval true" &&
 	echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
 	#
 	# Check if we can proceed to the next bisect state.
@@ -176,7 +199,8 @@ is_expected_rev() {
 
 check_expected_revs() {
 	for _rev in "$@"; do
-		if ! is_expected_rev "$_rev"; then
+		if ! is_expected_rev "$_rev"
+		then
 			rm -f "$GIT_DIR/BISECT_ANCESTORS_OK"
 			rm -f "$GIT_DIR/BISECT_EXPECTED_REV"
 			return
@@ -185,18 +209,18 @@ check_expected_revs() {
 }
 
 bisect_skip() {
-        all=''
+	all=''
 	for arg in "$@"
 	do
-	    case "$arg" in
-            *..*)
-		revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
-            *)
-                revs=$(git rev-parse --sq-quote "$arg") ;;
-	    esac
-            all="$all $revs"
-        done
-        eval bisect_state 'skip' $all
+		case "$arg" in
+		*..*)
+			revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
+		*)
+			revs=$(git rev-parse --sq-quote "$arg") ;;
+		esac
+		all="$all $revs"
+	done
+	eval bisect_state 'skip' $all
 }
 
 bisect_state() {
@@ -206,8 +230,8 @@ bisect_state() {
 	0,*)
 		die "$(gettext "Please call 'bisect_state' with at least one argument.")" ;;
 	1,bad|1,good|1,skip)
-		rev=$(git rev-parse --verify HEAD) ||
-			die "$(gettext "Bad rev input: HEAD")"
+		rev=$(git rev-parse --verify $(bisect_head)) ||
+			die "$(gettext "Bad rev input: $(bisect_head)")"
 		bisect_write "$state" "$rev"
 		check_expected_revs "$rev" ;;
 	2,bad|*,good|*,skip)
@@ -245,10 +269,7 @@ bisect_next_check() {
 	t,,good)
 		# have bad but not good.  we could bisect although
 		# this is less optimum.
-		(
-			gettext "Warning: bisecting only with a bad commit." &&
-			echo
-		) >&2
+		gettextln "Warning: bisecting only with a bad commit." >&2
 		if test -t 0
 		then
 			# TRANSLATORS: Make sure to include [Y] and [n] in your
@@ -264,18 +285,12 @@ bisect_next_check() {
 
 		if test -s "$GIT_DIR/BISECT_START"
 		then
-			(
-				gettext "You need to give me at least one good and one bad revisions.
-(You can use \"git bisect bad\" and \"git bisect good\" for that.)" &&
-				echo
-			) >&2
+			gettextln "You need to give me at least one good and one bad revisions.
+(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
 		else
-			(
-				gettext "You need to start by \"git bisect start\".
+			gettextln "You need to start by \"git bisect start\".
 You then need to give me at least one good and one bad revisions.
-(You can use \"git bisect bad\" and \"git bisect good\" for that.)" &&
-				echo
-			) >&2
+(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
 		fi
 		exit 1 ;;
 	esac
@@ -291,10 +306,10 @@ bisect_next() {
 	bisect_next_check good
 
 	# Perform all bisection computation, display and checkout
-	git bisect--helper --next-all
+	git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
 	res=$?
 
-        # Check if we should exit because bisection is finished
+	# Check if we should exit because bisection is finished
 	test $res -eq 10 && exit 0
 
 	# Check for an error in the bisection process
@@ -309,7 +324,8 @@ bisect_visualize() {
 	if test $# = 0
 	then
 		if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
-		   type gitk >/dev/null 2>&1; then
+			type gitk >/dev/null 2>&1
+		then
 			set gitk
 		else
 			set git log
@@ -327,25 +343,26 @@ bisect_visualize() {
 
 bisect_reset() {
 	test -s "$GIT_DIR/BISECT_START" || {
-		gettext "We are not bisecting."; echo
+		gettextln "We are not bisecting."
 		return
 	}
 	case "$#" in
 	0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
 	1) git rev-parse --quiet --verify "$1^{commit}" > /dev/null || {
-	       invalid="$1"
-	       die "$(eval_gettext "'\$invalid' is not a valid commit")"
-	   }
-	   branch="$1" ;;
+			invalid="$1"
+			die "$(eval_gettext "'\$invalid' is not a valid commit")"
+		}
+		branch="$1" ;;
 	*)
-	    usage ;;
+		usage ;;
 	esac
-	if git checkout "$branch" -- ; then
-		bisect_clean_state
-	else
+
+	if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" --
+	then
 		die "$(eval_gettext "Could not check out original HEAD '\$branch'.
 Try 'git bisect reset <commit>'.")"
 	fi
+	bisect_clean_state
 }
 
 bisect_clean_state() {
@@ -362,7 +379,8 @@ bisect_clean_state() {
 	rm -f "$GIT_DIR/BISECT_RUN" &&
 	# Cleanup head-name if it got left by an old version of git-bisect
 	rm -f "$GIT_DIR/head-name" &&
-
+	git update-ref -d --no-deref BISECT_HEAD &&
+	# clean up BISECT_START last
 	rm -f "$GIT_DIR/BISECT_START"
 }
 
@@ -374,7 +392,8 @@ bisect_replay () {
 	while read git bisect command rev
 	do
 		test "$git $bisect" = "git bisect" -o "$git" = "git-bisect" || continue
-		if test "$git" = "git-bisect"; then
+		if test "$git" = "git-bisect"
+		then
 			rev="$command"
 			command="$bisect"
 		fi
@@ -392,65 +411,62 @@ bisect_replay () {
 }
 
 bisect_run () {
-    bisect_next_check fail
-
-    while true
-    do
-      command="$@"
-      eval_gettext "running \$command"; echo
-      "$@"
-      res=$?
-
-      # Check for really bad run error.
-      if [ $res -lt 0 -o $res -ge 128 ]; then
-	  (
-	    eval_gettext "bisect run failed:
-exit code \$res from '\$command' is < 0 or >= 128" &&
-	    echo
-	  ) >&2
-	  exit $res
-      fi
-
-      # Find current state depending on run success or failure.
-      # A special exit code of 125 means cannot test.
-      if [ $res -eq 125 ]; then
-	  state='skip'
-      elif [ $res -gt 0 ]; then
-	  state='bad'
-      else
-	  state='good'
-      fi
-
-      # We have to use a subshell because "bisect_state" can exit.
-      ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
-      res=$?
-
-      cat "$GIT_DIR/BISECT_RUN"
-
-      if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
-		> /dev/null; then
-	  (
-	      gettext "bisect run cannot continue any more" &&
-	      echo
-	  ) >&2
-	  exit $res
-      fi
-
-      if [ $res -ne 0 ]; then
-	  (
-	      eval_gettext "bisect run failed:
-'bisect_state \$state' exited with error code \$res" &&
-	      echo
-	  ) >&2
-	  exit $res
-      fi
-
-      if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
-	  gettext "bisect run success"; echo
-	  exit 0;
-      fi
-
-    done
+	bisect_next_check fail
+
+	while true
+	do
+		command="$@"
+		eval_gettextln "running \$command"
+		"$@"
+		res=$?
+
+		# Check for really bad run error.
+		if [ $res -lt 0 -o $res -ge 128 ]
+		then
+			eval_gettextln "bisect run failed:
+exit code \$res from '\$command' is < 0 or >= 128" >&2
+			exit $res
+		fi
+
+		# Find current state depending on run success or failure.
+		# A special exit code of 125 means cannot test.
+		if [ $res -eq 125 ]
+		then
+			state='skip'
+		elif [ $res -gt 0 ]
+		then
+			state='bad'
+		else
+			state='good'
+		fi
+
+		# We have to use a subshell because "bisect_state" can exit.
+		( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
+		res=$?
+
+		cat "$GIT_DIR/BISECT_RUN"
+
+		if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
+			> /dev/null
+		then
+			gettextln "bisect run cannot continue any more" >&2
+			exit $res
+		fi
+
+		if [ $res -ne 0 ]
+		then
+			eval_gettextln "bisect run failed:
+'bisect_state \$state' exited with error code \$res" >&2
+			exit $res
+		fi
+
+		if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null
+		then
+			gettextln "bisect run success"
+			exit 0;
+		fi
+
+	done
 }
 
 bisect_log () {
@@ -460,33 +476,33 @@ bisect_log () {
 
 case "$#" in
 0)
-    usage ;;
+	usage ;;
 *)
-    cmd="$1"
-    shift
-    case "$cmd" in
-    help)
-        git bisect -h ;;
-    start)
-        bisect_start "$@" ;;
-    bad|good)
-        bisect_state "$cmd" "$@" ;;
-    skip)
-        bisect_skip "$@" ;;
-    next)
-        # Not sure we want "next" at the UI level anymore.
-        bisect_next "$@" ;;
-    visualize|view)
-	bisect_visualize "$@" ;;
-    reset)
-        bisect_reset "$@" ;;
-    replay)
-	bisect_replay "$@" ;;
-    log)
-	bisect_log ;;
-    run)
-        bisect_run "$@" ;;
-    *)
-        usage ;;
-    esac
+	cmd="$1"
+	shift
+	case "$cmd" in
+	help)
+		git bisect -h ;;
+	start)
+		bisect_start "$@" ;;
+	bad|good)
+		bisect_state "$cmd" "$@" ;;
+	skip)
+		bisect_skip "$@" ;;
+	next)
+		# Not sure we want "next" at the UI level anymore.
+		bisect_next "$@" ;;
+	visualize|view)
+		bisect_visualize "$@" ;;
+	reset)
+		bisect_reset "$@" ;;
+	replay)
+		bisect_replay "$@" ;;
+	log)
+		bisect_log ;;
+	run)
+		bisect_run "$@" ;;
+	*)
+		usage ;;
+	esac
 esac