1 files changed, 525 insertions, 0 deletions
diff --git a/git-bisect.sh b/git-bisect.sh
new file mode 100755
index 0000000000..af4d04c3be
--- /dev/null
+++ b/git-bisect.sh
@@ -0,0 +1,525 @@
+#!/bin/sh
+
+USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]'
+LONG_USAGE='git bisect help
+	print this long help message.
+git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
+	reset bisect state and start bisection.
+git bisect bad [<rev>]
+	mark <rev> a known-bad revision.
+git bisect good [<rev>...]
+	mark <rev>... known-good revisions.
+git bisect skip [(<rev>|<range>)...]
+	mark <rev>... untestable revisions.
+git bisect next
+	find next bisection to test and check it out.
+git bisect reset [<commit>]
+	finish bisection search and go back to commit.
+git bisect visualize
+	show bisect status in gitk.
+git bisect replay <logfile>
+	replay bisection log.
+git bisect log
+	show bisect log.
+git bisect run <cmd>...
+	use <cmd>... to automatically bisect.
+
+Please use "git help bisect" to get the full man page.'
+
+OPTIONS_SPEC=
+. git-sh-setup
+. git-sh-i18n
+
+_x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
+_x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
+
+bisect_head()
+{
+	if test -f "$GIT_DIR/BISECT_HEAD"
+	then
+		echo BISECT_HEAD
+	else
+		echo HEAD
+	fi
+}
+
+bisect_autostart() {
+	test -s "$GIT_DIR/BISECT_START" || {
+		gettextln "You need to start by \"git bisect start\"" >&2
+		if test -t 0
+		then
+			# TRANSLATORS: Make sure to include [Y] and [n] in your
+			# translation. The program will only accept English input
+			# at this point.
+			gettext "Do you want me to do it for you [Y/n]? " >&2
+			read yesno
+			case "$yesno" in
+			[Nn]*)
+				exit ;;
+			esac
+			bisect_start
+		else
+			exit 1
+		fi
+	}
+}
+
+bisect_start() {
+	#
+	# Check for one bad and then some good revisions.
+	#
+	has_double_dash=0
+	for arg; do
+		case "$arg" in --) has_double_dash=1; break ;; esac
+	done
+	orig_args=$(git rev-parse --sq-quote "$@")
+	bad_seen=0
+	eval=''
+	if test "z$(git rev-parse --is-bare-repository)" != zfalse
+	then
+		mode=--no-checkout
+	else
+		mode=''
+	fi
+	while [ $# -gt 0 ]; do
+		arg="$1"
+		case "$arg" in
+		--)
+			shift
+			break
+		;;
+		--no-checkout)
+			mode=--no-checkout
+			shift ;;
+		--*)
+			die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
+		*)
+			rev=$(git rev-parse -q --verify "$arg^{commit}") || {
+				test $has_double_dash -eq 1 &&
+				die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
+				break
+			}
+			case $bad_seen in
+			0) state='bad' ; bad_seen=1 ;;
+			*) state='good' ;;
+			esac
+			eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
+			shift
+			;;
+		esac
+	done
+
+	#
+	# Verify HEAD.
+	#
+	head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
+	head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
+	die "$(gettext "Bad HEAD - I need a HEAD")"
+
+	#
+	# Check if we are bisecting.
+	#
+	start_head=''
+	if test -s "$GIT_DIR/BISECT_START"
+	then
+		# Reset to the rev from where we started.
+		start_head=$(cat "$GIT_DIR/BISECT_START")
+		if test "z$mode" != "z--no-checkout"
+		then
+			git checkout "$start_head" -- ||
+			die "$(eval_gettext "Checking out '\$start_head' failed. Try 'git bisect reset <validbranch>'.")"
+		fi
+	else
+		# Get rev from where we start.
+		case "$head" in
+		refs/heads/*|$_x40)
+			# This error message should only be triggered by
+			# cogito usage, and cogito users should understand
+			# it relates to cg-seek.
+			[ -s "$GIT_DIR/head-name" ] &&
+				die "$(gettext "won't bisect on cg-seek'ed tree")"
+			start_head="${head#refs/heads/}"
+			;;
+		*)
+			die "$(gettext "Bad HEAD - strange symbolic ref")"
+			;;
+		esac
+	fi
+
+	#
+	# Get rid of any old bisect state.
+	#
+	bisect_clean_state || exit
+
+	#
+	# Change state.
+	# In case of mistaken revs or checkout error, or signals received,
+	# "bisect_auto_next" below may exit or misbehave.
+	# We have to trap this to be able to clean up using
+	# "bisect_clean_state".
+	#
+	trap 'bisect_clean_state' 0
+	trap 'exit 255' 1 2 3 15
+
+	#
+	# Write new start state.
+	#
+	echo "$start_head" >"$GIT_DIR/BISECT_START" && {
+		test "z$mode" != "z--no-checkout" ||
+		git update-ref --no-deref BISECT_HEAD "$start_head"
+	} &&
+	git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
+	eval "$eval true" &&
+	echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
+	#
+	# Check if we can proceed to the next bisect state.
+	#
+	bisect_auto_next
+
+	trap '-' 0
+}
+
+bisect_write() {
+	state="$1"
+	rev="$2"
+	nolog="$3"
+	case "$state" in
+		bad)		tag="$state" ;;
+		good|skip)	tag="$state"-"$rev" ;;
+		*)		die "$(eval_gettext "Bad bisect_write argument: \$state")" ;;
+	esac
+	git update-ref "refs/bisect/$tag" "$rev" || exit
+	echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
+	test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
+}
+
+is_expected_rev() {
+	test -f "$GIT_DIR/BISECT_EXPECTED_REV" &&
+	test "$1" = $(cat "$GIT_DIR/BISECT_EXPECTED_REV")
+}
+
+check_expected_revs() {
+	for _rev in "$@"; do
+		if ! is_expected_rev "$_rev"
+		then
+			rm -f "$GIT_DIR/BISECT_ANCESTORS_OK"
+			rm -f "$GIT_DIR/BISECT_EXPECTED_REV"
+			return
+		fi
+	done
+}
+
+bisect_skip() {
+	all=''
+	for arg in "$@"
+	do
+		case "$arg" in
+		*..*)
+			revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
+		*)
+			revs=$(git rev-parse --sq-quote "$arg") ;;
+		esac
+		all="$all $revs"
+	done
+	eval bisect_state 'skip' $all
+}
+
+bisect_state() {
+	bisect_autostart
+	state=$1
+	case "$#,$state" in
+	0,*)
+		die "$(gettext "Please call 'bisect_state' with at least one argument.")" ;;
+	1,bad|1,good|1,skip)
+		rev=$(git rev-parse --verify $(bisect_head)) ||
+			die "$(gettext "Bad rev input: $(bisect_head)")"
+		bisect_write "$state" "$rev"
+		check_expected_revs "$rev" ;;
+	2,bad|*,good|*,skip)
+		shift
+		eval=''
+		for rev in "$@"
+		do
+			sha=$(git rev-parse --verify "$rev^{commit}") ||
+				die "$(eval_gettext "Bad rev input: \$rev")"
+			eval="$eval bisect_write '$state' '$sha'; "
+		done
+		eval "$eval"
+		check_expected_revs "$@" ;;
+	*,bad)
+		die "$(gettext "'git bisect bad' can take only one argument.")" ;;
+	*)
+		usage ;;
+	esac
+	bisect_auto_next
+}
+
+bisect_next_check() {
+	missing_good= missing_bad=
+	git show-ref -q --verify refs/bisect/bad || missing_bad=t
+	test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t
+
+	case "$missing_good,$missing_bad,$1" in
+	,,*)
+		: have both good and bad - ok
+		;;
+	*,)
+		# do not have both but not asked to fail - just report.
+		false
+		;;
+	t,,good)
+		# have bad but not good.  we could bisect although
+		# this is less optimum.
+		gettextln "Warning: bisecting only with a bad commit." >&2
+		if test -t 0
+		then
+			# TRANSLATORS: Make sure to include [Y] and [n] in your
+			# translation. The program will only accept English input
+			# at this point.
+			gettext "Are you sure [Y/n]? " >&2
+			read yesno
+			case "$yesno" in [Nn]*) exit 1 ;; esac
+		fi
+		: bisect without good...
+		;;
+	*)
+
+		if test -s "$GIT_DIR/BISECT_START"
+		then
+			gettextln "You need to give me at least one good and one bad revisions.
+(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
+		else
+			gettextln "You need to start by \"git bisect start\".
+You then need to give me at least one good and one bad revisions.
+(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
+		fi
+		exit 1 ;;
+	esac
+}
+
+bisect_auto_next() {
+	bisect_next_check && bisect_next || :
+}
+
+bisect_next() {
+	case "$#" in 0) ;; *) usage ;; esac
+	bisect_autostart
+	bisect_next_check good
+
+	# Perform all bisection computation, display and checkout
+	git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
+	res=$?
+
+	# Check if we should exit because bisection is finished
+	if test $res -eq 10
+	then
+		bad_rev=$(git show-ref --hash --verify refs/bisect/bad)
+		bad_commit=$(git show-branch $bad_rev)
+		echo "# first bad commit: $bad_commit" >>"$GIT_DIR/BISECT_LOG"
+		exit 0
+	elif test $res -eq 2
+	then
+		echo "# only skipped commits left to test" >>"$GIT_DIR/BISECT_LOG"
+		good_revs=$(git for-each-ref --format="%(objectname)" "refs/bisect/good-*")
+		for skipped in $(git rev-list refs/bisect/bad --not $good_revs)
+		do
+			skipped_commit=$(git show-branch $skipped)
+			echo "# possible first bad commit: $skipped_commit" >>"$GIT_DIR/BISECT_LOG"
+		done
+		exit $res
+	fi
+
+	# Check for an error in the bisection process
+	test $res -ne 0 && exit $res
+
+	return 0
+}
+
+bisect_visualize() {
+	bisect_next_check fail
+
+	if test $# = 0
+	then
+		if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
+			type gitk >/dev/null 2>&1
+		then
+			set gitk
+		else
+			set git log
+		fi
+	else
+		case "$1" in
+		git*|tig) ;;
+		-*)	set git log "$@" ;;
+		*)	set git "$@" ;;
+		esac
+	fi
+
+	eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES")
+}
+
+bisect_reset() {
+	test -s "$GIT_DIR/BISECT_START" || {
+		gettextln "We are not bisecting."
+		return
+	}
+	case "$#" in
+	0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
+	1) git rev-parse --quiet --verify "$1^{commit}" >/dev/null || {
+			invalid="$1"
+			die "$(eval_gettext "'\$invalid' is not a valid commit")"
+		}
+		branch="$1" ;;
+	*)
+		usage ;;
+	esac
+
+	if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" --
+	then
+		die "$(eval_gettext "Could not check out original HEAD '\$branch'.
+Try 'git bisect reset <commit>'.")"
+	fi
+	bisect_clean_state
+}
+
+bisect_clean_state() {
+	# There may be some refs packed during bisection.
+	git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* |
+	while read ref hash
+	do
+		git update-ref -d $ref $hash || exit
+	done
+	rm -f "$GIT_DIR/BISECT_EXPECTED_REV" &&
+	rm -f "$GIT_DIR/BISECT_ANCESTORS_OK" &&
+	rm -f "$GIT_DIR/BISECT_LOG" &&
+	rm -f "$GIT_DIR/BISECT_NAMES" &&
+	rm -f "$GIT_DIR/BISECT_RUN" &&
+	# Cleanup head-name if it got left by an old version of git-bisect
+	rm -f "$GIT_DIR/head-name" &&
+	git update-ref -d --no-deref BISECT_HEAD &&
+	# clean up BISECT_START last
+	rm -f "$GIT_DIR/BISECT_START"
+}
+
+bisect_replay () {
+	file="$1"
+	test "$#" -eq 1 || die "$(gettext "No logfile given")"
+	test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")"
+	bisect_reset
+	while read git bisect command rev
+	do
+		test "$git $bisect" = "git bisect" -o "$git" = "git-bisect" || continue
+		if test "$git" = "git-bisect"
+		then
+			rev="$command"
+			command="$bisect"
+		fi
+		case "$command" in
+		start)
+			cmd="bisect_start $rev"
+			eval "$cmd" ;;
+		good|bad|skip)
+			bisect_write "$command" "$rev" ;;
+		*)
+			die "$(gettext "?? what are you talking about?")" ;;
+		esac
+	done <"$file"
+	bisect_auto_next
+}
+
+bisect_run () {
+	bisect_next_check fail
+
+	while true
+	do
+		command="$@"
+		eval_gettextln "running \$command"
+		"$@"
+		res=$?
+
+		# Check for really bad run error.
+		if [ $res -lt 0 -o $res -ge 128 ]
+		then
+			eval_gettextln "bisect run failed:
+exit code \$res from '\$command' is < 0 or >= 128" >&2
+			exit $res
+		fi
+
+		# Find current state depending on run success or failure.
+		# A special exit code of 125 means cannot test.
+		if [ $res -eq 125 ]
+		then
+			state='skip'
+		elif [ $res -gt 0 ]
+		then
+			state='bad'
+		else
+			state='good'
+		fi
+
+		# We have to use a subshell because "bisect_state" can exit.
+		( bisect_state $state >"$GIT_DIR/BISECT_RUN" )
+		res=$?
+
+		cat "$GIT_DIR/BISECT_RUN"
+
+		if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
+			>/dev/null
+		then
+			gettextln "bisect run cannot continue any more" >&2
+			exit $res
+		fi
+
+		if [ $res -ne 0 ]
+		then
+			eval_gettextln "bisect run failed:
+'bisect_state \$state' exited with error code \$res" >&2
+			exit $res
+		fi
+
+		if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" >/dev/null
+		then
+			gettextln "bisect run success"
+			exit 0;
+		fi
+
+	done
+}
+
+bisect_log () {
+	test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")"
+	cat "$GIT_DIR/BISECT_LOG"
+}
+
+case "$#" in
+0)
+	usage ;;
+*)
+	cmd="$1"
+	shift
+	case "$cmd" in
+	help)
+		git bisect -h ;;
+	start)
+		bisect_start "$@" ;;
+	bad|good)
+		bisect_state "$cmd" "$@" ;;
+	skip)
+		bisect_skip "$@" ;;
+	next)
+		# Not sure we want "next" at the UI level anymore.
+		bisect_next "$@" ;;
+	visualize|view)
+		bisect_visualize "$@" ;;
+	reset)
+		bisect_reset "$@" ;;
+	replay)
+		bisect_replay "$@" ;;
+	log)
+		bisect_log ;;
+	run)
+		bisect_run "$@" ;;
+	*)
+		usage ;;
+	esac
+esac