diff options
Diffstat (limited to 'contrib')
31 files changed, 1863 insertions, 383 deletions
diff --git a/contrib/buildsystems/engine.pl b/contrib/buildsystems/engine.pl index d506717bfd..23da787dc5 100644 --- a/contrib/buildsystems/engine.pl +++ b/contrib/buildsystems/engine.pl @@ -135,6 +135,11 @@ sub parseMakeOutput } } while($ate_next); + if ($text =~ /^test /) { + # options to test (eg -o) may be mistaken for linker options + next; + } + if($text =~ / -c /) { # compilation handleCompileLine($text, $line); @@ -180,9 +185,6 @@ sub parseMakeOutput # } elsif ($text =~ /generate-cmdlist\.sh/) { # # command for generating list of commands # -# } elsif ($text =~ /^test / && $text =~ /|| rm -f /) { -# # commands removing executables, if they exist -# # } elsif ($text =~ /new locations or Tcl/) { # # command for detecting Tcl/Tk changes # @@ -317,6 +319,7 @@ sub handleLinkLine push(@libs, "zlib.lib"); } elsif ("$part" eq "-lcrypto") { push(@libs, "libeay32.lib"); + } elsif ("$part" eq "-lssl") { push(@libs, "ssleay32.lib"); } elsif ($part =~ /^-/) { push(@lflags, $part); diff --git a/contrib/ciabot/README b/contrib/ciabot/README new file mode 100644 index 0000000000..3b916acece --- /dev/null +++ b/contrib/ciabot/README @@ -0,0 +1,12 @@ +These are hook scripts for the CIA notification service at <http://cia.vc/> + +They are maintained by Eric S. Raymond <esr@thyrsus.com>. There is an +upstream resource page for them at <http://www.catb.org/esr/ciabot/>, +but they are unlikely to change rapidly. + +You probably want the Python version; it's faster, more capable, and +better documented. The shell version is maintained only as a fallback +for use on hosting sites that don't permit Python hook scripts. + +You will find installation instructions for each script in its comment +header. diff --git a/contrib/ciabot/ciabot.py b/contrib/ciabot/ciabot.py new file mode 100755 index 0000000000..9775dffb5d --- /dev/null +++ b/contrib/ciabot/ciabot.py @@ -0,0 +1,222 @@ +#!/usr/bin/env python +# Copyright (c) 2010 Eric S. Raymond <esr@thyrsus.com> +# Distributed under BSD terms. +# +# This script contains porcelain and porcelain byproducts. +# It's Python because the Python standard libraries avoid portability/security +# issues raised by callouts in the ancestral Perl and sh scripts. It should +# be compatible back to Python 2.1.5 +# +# usage: ciabot.py [-V] [-n] [-p projectname] [refname [commits...]] +# +# This script is meant to be run either in a post-commit hook or in an +# update hook. If there's nothing unusual about your hosting setup, +# you can specify the project name with a -p option and avoid having +# to modify this script. Try it with -n to see the notification mail +# dumped to stdout and verify that it looks sane. With -V it dumps its +# version and exits. +# +# In post-commit, run it without arguments (other than possibly a -p +# option). It will query for current HEAD and the latest commit ID to +# get the information it needs. +# +# In update, call it with a refname followed by a list of commits: +# You want to reverse the order git rev-list emits becxause it lists +# from most recent to oldest. +# +# /path/to/ciabot.py ${refname} $(git rev-list ${oldhead}..${newhead} | tac) +# +# Note: this script uses mail, not XML-RPC, in order to avoid stalling +# until timeout when the CIA XML-RPC server is down. +# + +# +# The project as known to CIA. You will either want to change this +# or invoke the script with a -p option to set it. +# +project=None + +# +# You may not need to change these: +# +import os, sys, commands, socket, urllib + +# Name of the repository. +# You can hardwire this to make the script faster. +repo = os.path.basename(os.getcwd()) + +# Fully-qualified domain name of this host. +# You can hardwire this to make the script faster. +host = socket.getfqdn() + +# Changeset URL prefix for your repo: when the commit ID is appended +# to this, it should point at a CGI that will display the commit +# through gitweb or something similar. The defaults will probably +# work if you have a typical gitweb/cgit setup. +# +#urlprefix="http://%(host)s/cgi-bin/gitweb.cgi?p=%(repo)s;a=commit;h=" +urlprefix="http://%(host)s/cgi-bin/cgit.cgi/%(repo)s/commit/?id=" + +# The service used to turn your gitwebbish URL into a tinyurl so it +# will take up less space on the IRC notification line. +tinyifier = "http://tinyurl.com/api-create.php?url=" + +# The template used to generate the XML messages to CIA. You can make +# visible changes to the IRC-bot notification lines by hacking this. +# The default will produce a notfication line that looks like this: +# +# ${project}: ${author} ${repo}:${branch} * ${rev} ${files}: ${logmsg} ${url} +# +# By omitting $files you can collapse the files part to a single slash. +xml = '''\ +<message> + <generator> + <name>CIA Python client for Git</name> + <version>%(gitver)s</version> + <url>%(generator)s</url> + </generator> + <source> + <project>%(project)s</project> + <branch>%(repo)s:%(branch)s</branch> + </source> + <timestamp>%(ts)s</timestamp> + <body> + <commit> + <author>%(author)s</author> + <revision>%(rev)s</revision> + <files> + %(files)s + </files> + <log>%(logmsg)s %(url)s</log> + <url>%(url)s</url> + </commit> + </body> +</message> +''' + +# +# No user-serviceable parts below this line: +# + +# Addresses for the e-mail. The from address is a dummy, since CIA +# will never reply to this mail. +fromaddr = "CIABOT-NOREPLY@" + host +toaddr = "cia@cia.navi.cx" + +# Identify the generator script. +# Should only change when the script itself gets a new home and maintainer. +generator="http://www.catb.org/~esr/ciabot.py" + +def do(command): + return commands.getstatusoutput(command)[1] + +def report(refname, merged): + "Generate a commit notification to be reported to CIA" + + # Try to tinyfy a reference to a web view for this commit. + try: + url = open(urllib.urlretrieve(tinyifier + urlprefix + merged)[0]).read() + except: + url = urlprefix + merged + + branch = os.path.basename(refname) + + # Compute a shortnane for the revision + rev = do("git describe '"+ merged +"' 2>/dev/null") or merged[:12] + + # Extract the neta-information for the commit + rawcommit = do("git cat-file commit " + merged) + files=do("git diff-tree -r --name-only '"+ merged +"' | sed -e '1d' -e 's-.*-<file>&</file>-'") + inheader = True + headers = {} + logmsg = "" + for line in rawcommit.split("\n"): + if inheader: + if line: + fields = line.split() + headers[fields[0]] = " ".join(fields[1:]) + else: + inheader = False + else: + logmsg = line + break + (author, ts) = headers["author"].split(">") + + # This discards the part of the authors addrsss after @. + # Might be bnicece to ship the full email address, if not + # for spammers' address harvesters - getting this wrong + # would make the freenode #commits channel into harvester heaven. + author = author.replace("<", "").split("@")[0].split()[-1] + + # This ignores the timezone. Not clear what to do with it... + ts = ts.strip().split()[0] + + context = locals() + context.update(globals()) + + out = xml % context + + message = '''\ +Message-ID: <%(merged)s.%(author)s@%(project)s> +From: %(fromaddr)s +To: %(toaddr)s +Content-type: text/xml +Subject: DeliverXML + +%(out)s''' % locals() + + return message + +if __name__ == "__main__": + import getopt + + try: + (options, arguments) = getopt.getopt(sys.argv[1:], "np:V") + except getopt.GetoptError, msg: + print "ciabot.py: " + str(msg) + raise SystemExit, 1 + + mailit = True + for (switch, val) in options: + if switch == '-p': + project = val + elif switch == '-n': + mailit = False + elif switch == '-V': + print "ciabot.py: version 3.2" + sys.exit(0) + + # Cough and die if user has not specified a project + if not project: + sys.stderr.write("ciabot.py: no project specified, bailing out.\n") + sys.exit(1) + + # We'll need the git version number. + gitver = do("git --version").split()[0] + + urlprefix = urlprefix % globals() + + # The script wants a reference to head followed by the list of + # commit ID to report about. + if len(arguments) == 0: + refname = do("git symbolic-ref HEAD 2>/dev/null") + merges = [do("git rev-parse HEAD")] + else: + refname = arguments[0] + merges = arguments[1:] + + if mailit: + import smtplib + server = smtplib.SMTP('localhost') + + for merged in merges: + message = report(refname, merged) + if mailit: + server.sendmail(fromaddr, [toaddr], message) + else: + print message + + if mailit: + server.quit() + +#End diff --git a/contrib/ciabot/ciabot.sh b/contrib/ciabot/ciabot.sh new file mode 100755 index 0000000000..eb87bba38e --- /dev/null +++ b/contrib/ciabot/ciabot.sh @@ -0,0 +1,192 @@ +#!/bin/sh +# Distributed under the terms of the GNU General Public License v2 +# Copyright (c) 2006 Fernando J. Pereda <ferdy@gentoo.org> +# Copyright (c) 2008 Natanael Copa <natanael.copa@gmail.com> +# Copyright (c) 2010 Eric S. Raymond <esr@thyrsus.com> +# +# This is a version 3.x of ciabot.sh; use -V to find the exact +# version. Versions 1 and 2 were shipped in 2006 and 2008 and are not +# version-stamped. The version 2 maintainer has passed the baton. +# +# Note: This script should be considered obsolete. +# There is a faster, better-documented rewrite in Python: find it as ciabot.py +# Use this only if your hosting site forbids Python hooks. +# +# Originally based on Git ciabot.pl by Petr Baudis. +# This script contains porcelain and porcelain byproducts. +# +# usage: ciabot.sh [-V] [-n] [-p projectname] [refname commit] +# +# This script is meant to be run either in a post-commit hook or in an +# update hook. If there's nothing unusual about your hosting setup, +# you can specify the project name with a -p option and avoid having +# to modify this script. Try it with -n first to see the notification +# mail dumped to stdout and verify that it looks sane. Use -V to dump +# the version and exit. +# +# In post-commit, run it without arguments (other than possibly a -p +# option). It will query for current HEAD and the latest commit ID to +# get the information it needs. +# +# In update, you have to call it once per merged commit: +# +# refname=$1 +# oldhead=$2 +# newhead=$3 +# for merged in $(git rev-list ${oldhead}..${newhead} | tac) ; do +# /path/to/ciabot.bash ${refname} ${merged} +# done +# +# The reason for the tac call ids that git rev-list emits commits from +# most recent to least - better to ship notifactions from oldest to newest. +# +# Note: this script uses mail, not XML-RPC, in order to avoid stalling +# until timeout when the CIA XML-RPC server is down. +# + +# +# The project as known to CIA. You will either want to change this +# or set the project name with a -p option. +# +project= + +# +# You may not need to change these: +# + +# Name of the repository. +# You can hardwire this to make the script faster. +repo="`basename ${PWD}`" + +# Fully qualified domain name of the repo host. +# You can hardwire this to make the script faster. +host=`hostname --fqdn` + +# Changeset URL prefix for your repo: when the commit ID is appended +# to this, it should point at a CGI that will display the commit +# through gitweb or something similar. The defaults will probably +# work if you have a typical gitweb/cgit setup. +#urlprefix="http://${host}/cgi-bin/gitweb.cgi?p=${repo};a=commit;h=" +urlprefix="http://${host}/cgi-bin/cgit.cgi/${repo}/commit/?id=" + +# +# You probably will not need to change the following: +# + +# Identify the script. Should change only when the script itself +# gets a new home and maintainer. +generator="http://www.catb.org/~esr/ciabot/ciabot.sh" + +# Addresses for the e-mail +from="CIABOT-NOREPLY@${host}" +to="cia@cia.navi.cx" + +# SMTP client to use - may need to edit the absolute pathname for your system +sendmail="sendmail -t -f ${from}" + +# +# No user-serviceable parts below this line: +# + +# Should include all places sendmail is likely to lurk. +PATH="$PATH:/usr/sbin/" + +mode=mailit +while getopts pnV opt +do + case $opt in + p) project=$2; shift ; shift ;; + n) mode=dumpit; shift ;; + V) echo "ciabot.sh: version 3.2"; exit 0; shift ;; + esac +done + +# Cough and die if user has not specified a project +if [ -z "$project" ] +then + echo "ciabot.sh: no project specified, bailing out." >&2 + exit 1 +fi + +if [ $# -eq 0 ] ; then + refname=$(git symbolic-ref HEAD 2>/dev/null) + merged=$(git rev-parse HEAD) +else + refname=$1 + merged=$2 +fi + +# This tries to turn your gitwebbish URL into a tinyurl so it will take up +# less space on the IRC notification line. Some repo sites (I'm looking at +# you, berlios.de!) forbid wget calls for security reasons. On these, +# the code will fall back to the full un-tinyfied URL. +longurl=${urlprefix}${merged} +url=$(wget -O - -q http://tinyurl.com/api-create.php?url=${longurl} 2>/dev/null) +if [ -z "$url" ]; then + url="${longurl}" +fi + +refname=${refname##refs/heads/} + +gitver=$(git --version) +gitver=${gitver##* } + +rev=$(git describe ${merged} 2>/dev/null) +# ${merged:0:12} was the only bashism left in the 2008 version of this +# script, according to checkbashisms. Replace it with ${merged} here +# because it was just a fallback anyway, and it's worth accepting a +# longer fallback for faster execution and removing the bash +# dependency. +[ -z ${rev} ] && rev=${merged} + +# This discards the part of the author's address after @. +# Might be nice to ship the full email address, if not +# for spammers' address harvesters - getting this wrong +# would make the freenode #commits channel into harvester heaven. +rawcommit=$(git cat-file commit ${merged}) +author=$(echo "$rawcommit" | sed -n -e '/^author .*<\([^@]*\).*$/s--\1-p') +logmessage=$(echo "$rawcommit" | sed -e '1,/^$/d' | head -n 1) +logmessage=$(echo "$logmessage" | sed 's/\&/&\;/g; s/</<\;/g; s/>/>\;/g') +ts=$(echo "$rawcommit" | sed -n -e '/^author .*> \([0-9]\+\).*$/s--\1-p') +files=$(git diff-tree -r --name-only ${merged} | sed -e '1d' -e 's-.*-<file>&</file>-') + +out=" +<message> + <generator> + <name>CIA Shell client for Git</name> + <version>${gitver}</version> + <url>${generator}</url> + </generator> + <source> + <project>${project}</project> + <branch>$repo:${refname}</branch> + </source> + <timestamp>${ts}</timestamp> + <body> + <commit> + <author>${author}</author> + <revision>${rev}</revision> + <files> + ${files} + </files> + <log>${logmessage} ${url}</log> + <url>${url}</url> + </commit> + </body> +</message>" + +if [ "$mode" = "dumpit" ] +then + sendmail=cat +fi + +${sendmail} << EOM +Message-ID: <${merged}.${author}@${project}> +From: ${from} +To: ${to} +Content-type: text/xml +Subject: DeliverXML +${out} +EOM + +# vim: set tw=70 : diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 1a762e88e7..bb8d7d0878 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1,6 +1,6 @@ #!bash # -# bash completion support for core Git. +# bash/zsh completion support for core Git. # # Copyright (C) 2006,2007 Shawn O. Pearce <spearce@spearce.org> # Conceptually based on gitcompletion (http://gitweb.hawaga.org.uk/). @@ -18,11 +18,12 @@ # To use these routines: # # 1) Copy this file to somewhere (e.g. ~/.git-completion.sh). -# 2) Added the following line to your .bashrc: +# 2) Add the following line to your .bashrc/.zshrc: # source ~/.git-completion.sh # # 3) Consider changing your PS1 to also show the current branch: -# PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' +# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' +# ZSH: PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ ' # # The argument to __git_ps1 will be displayed only if you # are currently in a git repository. The %s token will be @@ -42,6 +43,24 @@ # set GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're # untracked files, then a '%' will be shown next to the branch name. # +# If you would like to see the difference between HEAD and its +# upstream, set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates +# you are behind, ">" indicates you are ahead, and "<>" +# indicates you have diverged. You can further control +# behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated +# list of values: +# verbose show number of commits ahead/behind (+/-) upstream +# legacy don't use the '--count' option available in recent +# versions of git-rev-list +# git always compare HEAD to @{upstream} +# svn always compare HEAD to your SVN upstream +# By default, __git_ps1 will compare HEAD to your SVN upstream +# if it can find one, or @{upstream} otherwise. Once you have +# set GIT_PS1_SHOWUPSTREAM, you can override it on a +# per-repository basis by setting the bash.showUpstream config +# variable. +# +# # To submit patches: # # *) Read Documentation/SubmittingPatches @@ -54,6 +73,10 @@ # git@vger.kernel.org # +if [[ -n ${ZSH_VERSION-} ]]; then + autoload -U +X bashcompinit && bashcompinit +fi + case "$COMP_WORDBREAKS" in *:*) : great ;; *) COMP_WORDBREAKS="$COMP_WORDBREAKS:" @@ -78,14 +101,134 @@ __gitdir () fi } +# stores the divergence from upstream in $p +# used by GIT_PS1_SHOWUPSTREAM +__git_ps1_show_upstream () +{ + local key value + local svn_remote=() svn_url_pattern count n + local upstream=git legacy="" verbose="" + + # get some config options from git-config + while read key value; do + case "$key" in + bash.showupstream) + GIT_PS1_SHOWUPSTREAM="$value" + if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then + p="" + return + fi + ;; + svn-remote.*.url) + svn_remote[ $((${#svn_remote[@]} + 1)) ]="$value" + svn_url_pattern+="\\|$value" + upstream=svn+git # default upstream is SVN if available, else git + ;; + esac + done < <(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ') + + # parse configuration values + for option in ${GIT_PS1_SHOWUPSTREAM}; do + case "$option" in + git|svn) upstream="$option" ;; + verbose) verbose=1 ;; + legacy) legacy=1 ;; + esac + done + + # Find our upstream + case "$upstream" in + git) upstream="@{upstream}" ;; + svn*) + # get the upstream from the "git-svn-id: ..." in a commit message + # (git-svn uses essentially the same procedure internally) + local svn_upstream=($(git log --first-parent -1 \ + --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null)) + if [[ 0 -ne ${#svn_upstream[@]} ]]; then + svn_upstream=${svn_upstream[ ${#svn_upstream[@]} - 2 ]} + svn_upstream=${svn_upstream%@*} + local n_stop="${#svn_remote[@]}" + for ((n=1; n <= n_stop; ++n)); do + svn_upstream=${svn_upstream#${svn_remote[$n]}} + done + + if [[ -z "$svn_upstream" ]]; then + # default branch name for checkouts with no layout: + upstream=${GIT_SVN_ID:-git-svn} + else + upstream=${svn_upstream#/} + fi + elif [[ "svn+git" = "$upstream" ]]; then + upstream="@{upstream}" + fi + ;; + esac + + # Find how many commits we are ahead/behind our upstream + if [[ -z "$legacy" ]]; then + count="$(git rev-list --count --left-right \ + "$upstream"...HEAD 2>/dev/null)" + else + # produce equivalent output to --count for older versions of git + local commits + if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)" + then + local commit behind=0 ahead=0 + for commit in $commits + do + case "$commit" in + "<"*) let ++behind + ;; + *) let ++ahead + ;; + esac + done + count="$behind $ahead" + else + count="" + fi + fi + + # calculate the result + if [[ -z "$verbose" ]]; then + case "$count" in + "") # no upstream + p="" ;; + "0 0") # equal to upstream + p="=" ;; + "0 "*) # ahead of upstream + p=">" ;; + *" 0") # behind upstream + p="<" ;; + *) # diverged from upstream + p="<>" ;; + esac + else + case "$count" in + "") # no upstream + p="" ;; + "0 0") # equal to upstream + p=" u=" ;; + "0 "*) # ahead of upstream + p=" u+${count#0 }" ;; + *" 0") # behind upstream + p=" u-${count% 0}" ;; + *) # diverged from upstream + p=" u+${count#* }-${count% *}" ;; + esac + fi + +} + + # __git_ps1 accepts 0 or 1 arguments (i.e., format string) # returns text to add to bash PS1 prompt (includes branch name) __git_ps1 () { local g="$(__gitdir)" if [ -n "$g" ]; then - local r - local b + local r="" + local b="" if [ -f "$g/rebase-merge/interactive" ]; then r="|REBASE-i" b="$(cat "$g/rebase-merge/head-name")" @@ -103,6 +246,8 @@ __git_ps1 () fi elif [ -f "$g/MERGE_HEAD" ]; then r="|MERGING" + elif [ -f "$g/CHERRY_PICK_HEAD" ]; then + r="|CHERRY-PICKING" elif [ -f "$g/BISECT_LOG" ]; then r="|BISECTING" fi @@ -118,7 +263,7 @@ __git_ps1 () (describe) git describe HEAD ;; (* | default) - git describe --exact-match HEAD ;; + git describe --tags --exact-match HEAD ;; esac 2>/dev/null)" || b="$(cut -c1-7 "$g/HEAD" 2>/dev/null)..." || @@ -127,11 +272,12 @@ __git_ps1 () } fi - local w - local i - local s - local u - local c + local w="" + local i="" + local s="" + local u="" + local c="" + local p="" if [ "true" = "$(git rev-parse --is-inside-git-dir 2>/dev/null)" ]; then if [ "true" = "$(git rev-parse --is-bare-repository 2>/dev/null)" ]; then @@ -159,13 +305,14 @@ __git_ps1 () u="%" fi fi - fi - if [ -n "${1-}" ]; then - printf "$1" "$c${b##refs/heads/}$w$i$s$u$r" - else - printf " (%s)" "$c${b##refs/heads/}$w$i$s$u$r" + if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then + __git_ps1_show_upstream + fi fi + + local f="$w$i$s$u" + printf "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r$p" fi } @@ -182,15 +329,172 @@ __gitcomp_1 () done } +# The following function is based on code from: +# +# bash_completion - programmable completion functions for bash 3.2+ +# +# Copyright © 2006-2008, Ian Macdonald <ian@caliban.org> +# © 2009-2010, Bash Completion Maintainers +# <bash-completion-devel@lists.alioth.debian.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# The latest version of this software can be obtained here: +# +# http://bash-completion.alioth.debian.org/ +# +# RELEASE: 2.x + +# This function can be used to access a tokenized list of words +# on the command line: +# +# __git_reassemble_comp_words_by_ref '=:' +# if test "${words_[cword_-1]}" = -w +# then +# ... +# fi +# +# The argument should be a collection of characters from the list of +# word completion separators (COMP_WORDBREAKS) to treat as ordinary +# characters. +# +# This is roughly equivalent to going back in time and setting +# COMP_WORDBREAKS to exclude those characters. The intent is to +# make option types like --date=<type> and <rev>:<path> easy to +# recognize by treating each shell word as a single token. +# +# It is best not to set COMP_WORDBREAKS directly because the value is +# shared with other completion scripts. By the time the completion +# function gets called, COMP_WORDS has already been populated so local +# changes to COMP_WORDBREAKS have no effect. +# +# Output: words_, cword_, cur_. + +__git_reassemble_comp_words_by_ref() +{ + local exclude i j first + # Which word separators to exclude? + exclude="${1//[^$COMP_WORDBREAKS]}" + cword_=$COMP_CWORD + if [ -z "$exclude" ]; then + words_=("${COMP_WORDS[@]}") + return + fi + # List of word completion separators has shrunk; + # re-assemble words to complete. + for ((i=0, j=0; i < ${#COMP_WORDS[@]}; i++, j++)); do + # Append each nonempty word consisting of just + # word separator characters to the current word. + first=t + while + [ $i -gt 0 ] && + [ -n "${COMP_WORDS[$i]}" ] && + # word consists of excluded word separators + [ "${COMP_WORDS[$i]//[^$exclude]}" = "${COMP_WORDS[$i]}" ] + do + # Attach to the previous token, + # unless the previous token is the command name. + if [ $j -ge 2 ] && [ -n "$first" ]; then + ((j--)) + fi + first= + words_[$j]=${words_[j]}${COMP_WORDS[i]} + if [ $i = $COMP_CWORD ]; then + cword_=$j + fi + if (($i < ${#COMP_WORDS[@]} - 1)); then + ((i++)) + else + # Done. + return + fi + done + words_[$j]=${words_[j]}${COMP_WORDS[i]} + if [ $i = $COMP_CWORD ]; then + cword_=$j + fi + done +} + +if ! type _get_comp_words_by_ref >/dev/null 2>&1; then +if [[ -z ${ZSH_VERSION:+set} ]]; then +_get_comp_words_by_ref () +{ + local exclude cur_ words_ cword_ + if [ "$1" = "-n" ]; then + exclude=$2 + shift 2 + fi + __git_reassemble_comp_words_by_ref "$exclude" + cur_=${words_[cword_]} + while [ $# -gt 0 ]; do + case "$1" in + cur) + cur=$cur_ + ;; + prev) + prev=${words_[$cword_-1]} + ;; + words) + words=("${words_[@]}") + ;; + cword) + cword=$cword_ + ;; + esac + shift + done +} +else +_get_comp_words_by_ref () +{ + while [ $# -gt 0 ]; do + case "$1" in + cur) + cur=${COMP_WORDS[COMP_CWORD]} + ;; + prev) + prev=${COMP_WORDS[COMP_CWORD-1]} + ;; + words) + words=("${COMP_WORDS[@]}") + ;; + cword) + cword=$COMP_CWORD + ;; + -n) + # assume COMP_WORDBREAKS is already set sanely + shift + ;; + esac + shift + done +} +fi +fi + # __gitcomp accepts 1, 2, 3, or 4 arguments # generates completion reply with compgen __gitcomp () { - local cur="${COMP_WORDS[COMP_CWORD]}" + local cur_="$cur" + if [ $# -gt 2 ]; then - cur="$3" + cur_="$3" fi - case "$cur" in + case "$cur_" in --*=) COMPREPLY=() ;; @@ -198,7 +502,7 @@ __gitcomp () local IFS=$'\n' COMPREPLY=($(compgen -P "${2-}" \ -W "$(__gitcomp_1 "${1-}" "${4-}")" \ - -- "$cur")) + -- "$cur_")) ;; esac } @@ -241,25 +545,45 @@ __git_tags () done } -# __git_refs accepts 0 or 1 arguments (to pass to __gitdir) +# __git_refs accepts 0, 1 (to pass to __gitdir), or 2 arguments +# presence of 2nd argument means use the guess heuristic employed +# by checkout for tracking branches __git_refs () { - local i is_hash=y dir="$(__gitdir "${1-}")" - local cur="${COMP_WORDS[COMP_CWORD]}" format refs + local i is_hash=y dir="$(__gitdir "${1-}")" track="${2-}" + local format refs if [ -d "$dir" ]; then case "$cur" in refs|refs/*) format="refname" refs="${cur%/*}" + track="" ;; *) - if [ -e "$dir/HEAD" ]; then echo HEAD; fi + for i in HEAD FETCH_HEAD ORIG_HEAD MERGE_HEAD; do + if [ -e "$dir/$i" ]; then echo $i; fi + done format="refname:short" refs="refs/tags refs/heads refs/remotes" ;; esac git --git-dir="$dir" for-each-ref --format="%($format)" \ $refs + if [ -n "$track" ]; then + # employ the heuristic used by git checkout + # Try to find a remote branch that matches the completion word + # but only output if the branch name is unique + local ref entry + git --git-dir="$dir" for-each-ref --shell --format="ref=%(refname:short)" \ + "refs/remotes/" | \ + while read entry; do + eval "$entry" + ref="${ref#*/}" + if [[ "$ref" == "$cur"* ]]; then + echo "$ref" + fi + done | uniq -u + fi return fi for i in $(git ls-remote "$dir" 2>/dev/null); do @@ -304,12 +628,12 @@ __git_refs_remotes () __git_remotes () { local i ngoff IFS=$'\n' d="$(__gitdir)" - shopt -q nullglob || ngoff=1 - shopt -s nullglob + __git_shopt -q nullglob || ngoff=1 + __git_shopt -s nullglob for i in "$d/remotes"/*; do echo ${i#$d/remotes/} done - [ "$ngoff" ] && shopt -u nullglob + [ "$ngoff" ] && __git_shopt -u nullglob for i in $(git --git-dir="$d" config --get-regexp 'remote\..*\.url' 2>/dev/null); do i="${i#remote.}" echo "${i/.url*/}" @@ -339,24 +663,27 @@ __git_compute_merge_strategies () : ${__git_merge_strategies:=$(__git_list_merge_strategies)} } -__git_complete_file () +__git_complete_revlist_file () { - local pfx ls ref cur="${COMP_WORDS[COMP_CWORD]}" - case "$cur" in + local pfx ls ref cur_="$cur" + case "$cur_" in + *..?*:*) + return + ;; ?*:*) - ref="${cur%%:*}" - cur="${cur#*:}" - case "$cur" in + ref="${cur_%%:*}" + cur_="${cur_#*:}" + case "$cur_" in ?*/*) - pfx="${cur%/*}" - cur="${cur##*/}" + pfx="${cur_%/*}" + cur_="${cur_##*/}" ls="$ref:$pfx" pfx="$pfx/" ;; *) ls="$ref" ;; - esac + esac case "$COMP_WORDBREAKS" in *:*) : great ;; @@ -379,27 +706,17 @@ __git_complete_file () s,$,/, } s/^.* //')" \ - -- "$cur")) + -- "$cur_")) ;; - *) - __gitcomp "$(__git_refs)" - ;; - esac -} - -__git_complete_revlist () -{ - local pfx cur="${COMP_WORDS[COMP_CWORD]}" - case "$cur" in *...*) - pfx="${cur%...*}..." - cur="${cur#*...}" - __gitcomp "$(__git_refs)" "$pfx" "$cur" + pfx="${cur_%...*}..." + cur_="${cur_#*...}" + __gitcomp "$(__git_refs)" "$pfx" "$cur_" ;; *..*) - pfx="${cur%..*}.." - cur="${cur#*..}" - __gitcomp "$(__git_refs)" "$pfx" "$cur" + pfx="${cur_%..*}.." + cur_="${cur_#*..}" + __gitcomp "$(__git_refs)" "$pfx" "$cur_" ;; *) __gitcomp "$(__git_refs)" @@ -407,13 +724,23 @@ __git_complete_revlist () esac } + +__git_complete_file () +{ + __git_complete_revlist_file +} + +__git_complete_revlist () +{ + __git_complete_revlist_file +} + __git_complete_remote_or_refspec () { - local cmd="${COMP_WORDS[1]}" - local cur="${COMP_WORDS[COMP_CWORD]}" + local cur_="$cur" cmd="${words[1]}" local i c=2 remote="" pfx="" lhs=1 no_complete_refspec=0 - while [ $c -lt $COMP_CWORD ]; do - i="${COMP_WORDS[c]}" + while [ $c -lt $cword ]; do + i="${words[c]}" case "$i" in --mirror) [ "$cmd" = "push" ] && no_complete_refspec=1 ;; --all) @@ -440,40 +767,40 @@ __git_complete_remote_or_refspec () return fi [ "$remote" = "." ] && remote= - case "$cur" in + case "$cur_" in *:*) case "$COMP_WORDBREAKS" in *:*) : great ;; - *) pfx="${cur%%:*}:" ;; + *) pfx="${cur_%%:*}:" ;; esac - cur="${cur#*:}" + cur_="${cur_#*:}" lhs=0 ;; +*) pfx="+" - cur="${cur#+}" + cur_="${cur_#+}" ;; esac case "$cmd" in fetch) if [ $lhs = 1 ]; then - __gitcomp "$(__git_refs2 "$remote")" "$pfx" "$cur" + __gitcomp "$(__git_refs2 "$remote")" "$pfx" "$cur_" else - __gitcomp "$(__git_refs)" "$pfx" "$cur" + __gitcomp "$(__git_refs)" "$pfx" "$cur_" fi ;; pull) if [ $lhs = 1 ]; then - __gitcomp "$(__git_refs "$remote")" "$pfx" "$cur" + __gitcomp "$(__git_refs "$remote")" "$pfx" "$cur_" else - __gitcomp "$(__git_refs)" "$pfx" "$cur" + __gitcomp "$(__git_refs)" "$pfx" "$cur_" fi ;; push) if [ $lhs = 1 ]; then - __gitcomp "$(__git_refs)" "$pfx" "$cur" + __gitcomp "$(__git_refs)" "$pfx" "$cur_" else - __gitcomp "$(__git_refs "$remote")" "$pfx" "$cur" + __gitcomp "$(__git_refs "$remote")" "$pfx" "$cur_" fi ;; esac @@ -482,12 +809,11 @@ __git_complete_remote_or_refspec () __git_complete_strategy () { __git_compute_merge_strategies - case "${COMP_WORDS[COMP_CWORD-1]}" in + case "$prev" in -s|--strategy) __gitcomp "$__git_merge_strategies" return 0 esac - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --strategy=*) __gitcomp "$__git_merge_strategies" "" "${cur##--strategy=}" @@ -570,7 +896,6 @@ __git_list_porcelain_commands () quiltimport) : import;; read-tree) : plumbing;; receive-pack) : plumbing;; - reflog) : plumbing;; remote-*) : transport;; repo-config) : deprecated;; rerere) : plumbing;; @@ -609,6 +934,19 @@ __git_compute_porcelain_commands () : ${__git_porcelain_commands:=$(__git_list_porcelain_commands)} } +__git_pretty_aliases () +{ + local i IFS=$'\n' + for i in $(git --git-dir="$(__gitdir)" config --get-regexp "pretty\..*" 2>/dev/null); do + case "$i" in + pretty.*) + i="${i#pretty.}" + echo "${i/ */}" + ;; + esac + done +} + __git_aliases () { local i IFS=$'\n' @@ -628,10 +966,19 @@ __git_aliased_command () local word cmdline=$(git --git-dir="$(__gitdir)" \ config --get "alias.$1") for word in $cmdline; do - if [ "${word##-*}" ]; then - echo $word + case "$word" in + \!gitk|gitk) + echo "gitk" return - fi + ;; + \!*) : shell command alias ;; + -*) : option ;; + *=*) : setting env ;; + git) : git itself ;; + *) + echo "$word" + return + esac done } @@ -639,9 +986,8 @@ __git_aliased_command () __git_find_on_cmdline () { local word subcommand c=1 - - while [ $c -lt $COMP_CWORD ]; do - word="${COMP_WORDS[c]}" + while [ $c -lt $cword ]; do + word="${words[c]}" for subcommand in $1; do if [ "$subcommand" = "$word" ]; then echo "$subcommand" @@ -655,8 +1001,8 @@ __git_find_on_cmdline () __git_has_doubledash () { local c=1 - while [ $c -lt $COMP_CWORD ]; do - if [ "--" = "${COMP_WORDS[c]}" ]; then + while [ $c -lt $cword ]; do + if [ "--" = "${words[c]}" ]; then return 0 fi c=$((++c)) @@ -668,9 +1014,9 @@ __git_whitespacelist="nowarn warn error error-all fix" _git_am () { - local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)" + local dir="$(__gitdir)" if [ -d "$dir"/rebase-apply ]; then - __gitcomp "--skip --resolved --abort" + __gitcomp "--skip --continue --resolved --abort" return fi case "$cur" in @@ -692,7 +1038,6 @@ _git_am () _git_apply () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --whitespace=*) __gitcomp "$__git_whitespacelist" "" "${cur##--whitespace=}" @@ -715,7 +1060,6 @@ _git_add () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -729,7 +1073,6 @@ _git_add () _git_archive () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --format=*) __gitcomp "$(git archive --list)" "" "${cur##--format=}" @@ -757,12 +1100,16 @@ _git_bisect () local subcommands="start bad good skip reset visualize replay log run" local subcommand="$(__git_find_on_cmdline "$subcommands")" if [ -z "$subcommand" ]; then - __gitcomp "$subcommands" + if [ -f "$(__gitdir)"/BISECT_START ]; then + __gitcomp "$subcommands" + else + __gitcomp "replay start" + fi return fi case "$subcommand" in - bad|good|reset|skip) + bad|good|reset|skip|start) __gitcomp "$(__git_refs)" ;; *) @@ -775,8 +1122,8 @@ _git_branch () { local i c=1 only_local_ref="n" has_r="n" - while [ $c -lt $COMP_CWORD ]; do - i="${COMP_WORDS[c]}" + while [ $c -lt $cword ]; do + i="${words[c]}" case "$i" in -d|-m) only_local_ref="y" ;; -r) has_r="y" ;; @@ -784,11 +1131,12 @@ _git_branch () c=$((++c)) done - case "${COMP_WORDS[COMP_CWORD]}" in + case "$cur" in --*) __gitcomp " --color --no-color --verbose --abbrev= --no-abbrev --track --no-track --contains --merged --no-merged + --set-upstream " ;; *) @@ -803,8 +1151,8 @@ _git_branch () _git_bundle () { - local cmd="${COMP_WORDS[2]}" - case "$COMP_CWORD" in + local cmd="${words[2]}" + case "$cword" in 2) __gitcomp "create list-heads verify unbundle" ;; @@ -825,7 +1173,6 @@ _git_checkout () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --conflict=*) __gitcomp "diff3 merge" "" "${cur##--conflict=}" @@ -833,11 +1180,17 @@ _git_checkout () --*) __gitcomp " --quiet --ours --theirs --track --no-track --merge - --conflict= --patch + --conflict= --orphan --patch " ;; *) - __gitcomp "$(__git_refs)" + # check if --track, --no-track, or --no-guess was specified + # if so, disable DWIM mode + local flags="--track --no-track --no-guess" track=1 + if [ -n "$(__git_find_on_cmdline "$flags")" ]; then + track='' + fi + __gitcomp "$(__git_refs '' $track)" ;; esac } @@ -849,7 +1202,6 @@ _git_cherry () _git_cherry_pick () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--edit --no-commit" @@ -864,7 +1216,6 @@ _git_clean () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--dry-run --quiet" @@ -876,7 +1227,6 @@ _git_clean () _git_clone () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -903,7 +1253,6 @@ _git_commit () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --cleanup=*) __gitcomp "default strip verbatim whitespace @@ -938,7 +1287,6 @@ _git_commit () _git_describe () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -970,28 +1318,26 @@ _git_diff () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--cached --staged --pickaxe-all --pickaxe-regex - --base --ours --theirs + --base --ours --theirs --no-index $__git_diff_common_options " return ;; esac - __git_complete_file + __git_complete_revlist_file } __git_mergetools_common="diffuse ecmerge emerge kdiff3 meld opendiff - tkdiff vimdiff gvimdiff xxdiff araxis p4merge + tkdiff vimdiff gvimdiff xxdiff araxis p4merge bc3 " _git_difftool () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --tool=*) __gitcomp "$__git_mergetools_common kompare" "" "${cur##--tool=}" @@ -1016,7 +1362,6 @@ __git_fetch_options=" _git_fetch () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "$__git_fetch_options" @@ -1028,7 +1373,6 @@ _git_fetch () _git_format_patch () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --thread=*) __gitcomp " @@ -1043,7 +1387,7 @@ _git_format_patch () --numbered --start-number --numbered-files --keep-subject - --signoff + --signoff --signature --no-signature --in-reply-to= --cc= --full-index --binary --not --all @@ -1060,7 +1404,6 @@ _git_format_patch () _git_fsck () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -1075,7 +1418,6 @@ _git_fsck () _git_gc () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--prune --aggressive" @@ -1085,11 +1427,15 @@ _git_gc () COMPREPLY=() } +_git_gitk () +{ + _gitk +} + _git_grep () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -1112,7 +1458,6 @@ _git_grep () _git_help () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--all --info --man --web" @@ -1120,7 +1465,7 @@ _git_help () ;; esac __git_compute_all_commands - __gitcomp "$__git_all_commands + __gitcomp "$__git_all_commands $(__git_aliases) attributes cli core-tutorial cvs-migration diffcore gitk glossary hooks ignore modules repository-layout tutorial tutorial-2 @@ -1130,7 +1475,6 @@ _git_help () _git_init () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --shared=*) __gitcomp " @@ -1150,7 +1494,6 @@ _git_ls_files () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--cached --deleted --modified --others --ignored @@ -1184,12 +1527,14 @@ __git_log_common_options=" --max-count= --max-age= --since= --after= --min-age= --until= --before= + --min-parents= --max-parents= + --no-min-parents --no-max-parents " # Options that go well for log and gitk (not shortlog) __git_log_gitk_options=" --dense --sparse --full-history --simplify-merges --simplify-by-decoration - --left-right + --left-right --notes --no-notes " # Options that go well for log and shortlog (not gitk) __git_log_shortlog_options=" @@ -1204,7 +1549,6 @@ _git_log () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" local g="$(git rev-parse --git-dir 2>/dev/null)" local merge="" if [ -f "$g/MERGE_HEAD" ]; then @@ -1212,12 +1556,12 @@ _git_log () fi case "$cur" in --pretty=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--pretty=}" return ;; --format=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--format=}" return ;; @@ -1263,7 +1607,6 @@ _git_merge () { __git_complete_strategy && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "$__git_merge_options" @@ -1274,7 +1617,6 @@ _git_merge () _git_mergetool () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --tool=*) __gitcomp "$__git_mergetools_common tortoisemerge" "" "${cur##--tool=}" @@ -1295,7 +1637,6 @@ _git_merge_base () _git_mv () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--dry-run" @@ -1310,11 +1651,59 @@ _git_name_rev () __gitcomp "--tags --all --stdin" } +_git_notes () +{ + local subcommands='add append copy edit list prune remove show' + local subcommand="$(__git_find_on_cmdline "$subcommands")" + + case "$subcommand,$cur" in + ,--*) + __gitcomp '--ref' + ;; + ,*) + case "${words[cword-1]}" in + --ref) + __gitcomp "$(__git_refs)" + ;; + *) + __gitcomp "$subcommands --ref" + ;; + esac + ;; + add,--reuse-message=*|append,--reuse-message=*) + __gitcomp "$(__git_refs)" "" "${cur##--reuse-message=}" + ;; + add,--reedit-message=*|append,--reedit-message=*) + __gitcomp "$(__git_refs)" "" "${cur##--reedit-message=}" + ;; + add,--*|append,--*) + __gitcomp '--file= --message= --reedit-message= + --reuse-message=' + ;; + copy,--*) + __gitcomp '--stdin' + ;; + prune,--*) + __gitcomp '--dry-run --verbose' + ;; + prune,*) + ;; + *) + case "${words[cword-1]}" in + -m|-F) + ;; + *) + __gitcomp "$(__git_refs)" + ;; + esac + ;; + esac +} + _git_pull () { __git_complete_strategy && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -1330,8 +1719,7 @@ _git_pull () _git_push () { - local cur="${COMP_WORDS[COMP_CWORD]}" - case "${COMP_WORDS[COMP_CWORD-1]}" in + case "$prev" in --repo) __gitcomp "$(__git_remotes)" return @@ -1354,7 +1742,7 @@ _git_push () _git_rebase () { - local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)" + local dir="$(__gitdir)" if [ -d "$dir"/rebase-apply ] || [ -d "$dir"/rebase-merge ]; then __gitcomp "--continue --skip --abort" return @@ -1371,6 +1759,7 @@ _git_rebase () --preserve-merges --stat --no-stat --committer-date-is-author-date --ignore-date --ignore-whitespace --whitespace= + --autosquash " return @@ -1378,12 +1767,23 @@ _git_rebase () __gitcomp "$(__git_refs)" } +_git_reflog () +{ + local subcommands="show delete expire" + local subcommand="$(__git_find_on_cmdline "$subcommands")" + + if [ -z "$subcommand" ]; then + __gitcomp "$subcommands" + else + __gitcomp "$(__git_refs)" + fi +} + __git_send_email_confirm_options="always never auto cc compose" __git_send_email_suppresscc_options="author self cc bodycc sob cccmd body all" _git_send_email () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --confirm=*) __gitcomp " @@ -1418,11 +1818,16 @@ _git_send_email () COMPREPLY=() } +_git_stage () +{ + _git_add +} + __git_config_get_set_variables () { - local prevword word config_file= c=$COMP_CWORD + local prevword word config_file= c=$cword while [ $c -gt 1 ]; do - word="${COMP_WORDS[c]}" + word="${words[c]}" case "$word" in --global|--system|--file=*) config_file="$word" @@ -1450,9 +1855,7 @@ __git_config_get_set_variables () _git_config () { - local cur="${COMP_WORDS[COMP_CWORD]}" - local prv="${COMP_WORDS[COMP_CWORD-1]}" - case "$prv" in + case "$prev" in branch.*.remote) __gitcomp "$(__git_remotes)" return @@ -1462,13 +1865,13 @@ _git_config () return ;; remote.*.fetch) - local remote="${prv#remote.}" + local remote="${prev#remote.}" remote="${remote%.fetch}" __gitcomp "$(__git_refs_remotes "$remote")" return ;; remote.*.push) - local remote="${prv#remote.}" + local remote="${prev#remote.}" remote="${remote%.push}" __gitcomp "$(git --git-dir="$(__gitdir)" \ for-each-ref --format='%(refname):%(refname)' \ @@ -1537,98 +1940,108 @@ _git_config () return ;; branch.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" - __gitcomp "remote merge mergeoptions rebase" "$pfx" "$cur" + local pfx="${cur%.*}." cur_="${cur##*.}" + __gitcomp "remote merge mergeoptions rebase" "$pfx" "$cur_" return ;; branch.*) - local pfx="${cur%.*}." - cur="${cur#*.}" - __gitcomp "$(__git_heads)" "$pfx" "$cur" "." + local pfx="${cur%.*}." cur_="${cur#*.}" + __gitcomp "$(__git_heads)" "$pfx" "$cur_" "." return ;; guitool.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" + local pfx="${cur%.*}." cur_="${cur##*.}" __gitcomp " argprompt cmd confirm needsfile noconsole norescan prompt revprompt revunmerged title - " "$pfx" "$cur" + " "$pfx" "$cur_" return ;; difftool.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" - __gitcomp "cmd path" "$pfx" "$cur" + local pfx="${cur%.*}." cur_="${cur##*.}" + __gitcomp "cmd path" "$pfx" "$cur_" return ;; man.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" - __gitcomp "cmd path" "$pfx" "$cur" + local pfx="${cur%.*}." cur_="${cur##*.}" + __gitcomp "cmd path" "$pfx" "$cur_" return ;; mergetool.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" - __gitcomp "cmd path trustExitCode" "$pfx" "$cur" + local pfx="${cur%.*}." cur_="${cur##*.}" + __gitcomp "cmd path trustExitCode" "$pfx" "$cur_" return ;; pager.*) - local pfx="${cur%.*}." - cur="${cur#*.}" + local pfx="${cur%.*}." cur_="${cur#*.}" __git_compute_all_commands - __gitcomp "$__git_all_commands" "$pfx" "$cur" + __gitcomp "$__git_all_commands" "$pfx" "$cur_" return ;; remote.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" + local pfx="${cur%.*}." cur_="${cur##*.}" __gitcomp " url proxy fetch push mirror skipDefaultUpdate receivepack uploadpack tagopt pushurl - " "$pfx" "$cur" + " "$pfx" "$cur_" return ;; remote.*) - local pfx="${cur%.*}." - cur="${cur#*.}" - __gitcomp "$(__git_remotes)" "$pfx" "$cur" "." + local pfx="${cur%.*}." cur_="${cur#*.}" + __gitcomp "$(__git_remotes)" "$pfx" "$cur_" "." return ;; url.*.*) - local pfx="${cur%.*}." - cur="${cur##*.}" - __gitcomp "insteadOf pushInsteadOf" "$pfx" "$cur" + local pfx="${cur%.*}." cur_="${cur##*.}" + __gitcomp "insteadOf pushInsteadOf" "$pfx" "$cur_" return ;; esac __gitcomp " - add.ignore-errors + add.ignoreErrors + advice.commitBeforeMerge + advice.detachedHead + advice.implicitIdentity + advice.pushNonFastForward + advice.resolveConflict + advice.statusHints alias. + am.keepcr apply.ignorewhitespace apply.whitespace branch.autosetupmerge branch.autosetuprebase + browser. clean.requireForce color.branch color.branch.current color.branch.local color.branch.plain color.branch.remote + color.decorate.HEAD + color.decorate.branch + color.decorate.remoteBranch + color.decorate.stash + color.decorate.tag color.diff color.diff.commit color.diff.frag + color.diff.func color.diff.meta color.diff.new color.diff.old color.diff.plain color.diff.whitespace color.grep - color.grep.external + color.grep.context + color.grep.filename + color.grep.function + color.grep.linenumber color.grep.match + color.grep.selected + color.grep.separator color.interactive + color.interactive.error color.interactive.header color.interactive.help color.interactive.prompt @@ -1642,21 +2055,29 @@ _git_config () color.status.untracked color.status.updated color.ui + commit.status commit.template + core.abbrevguard + core.askpass + core.attributesfile core.autocrlf core.bare + core.bigFileThreshold core.compression core.createObject core.deltaBaseCacheLimit core.editor + core.eol core.excludesfile core.fileMode core.fsyncobjectfiles core.gitProxy core.ignoreCygwinFSTricks core.ignoreStat + core.ignorecase core.logAllRefUpdates core.loosecompression + core.notesRef core.packedGitLimit core.packedGitWindowSize core.pager @@ -1666,6 +2087,7 @@ _git_config () core.repositoryFormatVersion core.safecrlf core.sharedRepository + core.sparseCheckout core.symlinks core.trustctime core.warnAmbiguousRefs @@ -1673,25 +2095,30 @@ _git_config () core.worktree diff.autorefreshindex diff.external + diff.ignoreSubmodules diff.mnemonicprefix + diff.noprefix diff.renameLimit - diff.renameLimit. diff.renames diff.suppressBlankEmpty diff.tool diff.wordRegex difftool. difftool.prompt + fetch.recurseSubmodules fetch.unpackLimit format.attach format.cc format.headers format.numbered format.pretty + format.signature format.signoff format.subjectprefix format.suffix format.thread + format.to + gc. gc.aggressiveWindow gc.auto gc.autopacklimit @@ -1729,15 +2156,20 @@ _git_config () http.lowSpeedLimit http.lowSpeedTime http.maxRequests + http.minSessions http.noEPSV + http.postBuffer http.proxy http.sslCAInfo http.sslCAPath http.sslCert + http.sslCertPasswordProtected http.sslKey http.sslVerify + http.useragent i18n.commitEncoding i18n.logOutputEncoding + imap.authMethod imap.folder imap.host imap.pass @@ -1746,6 +2178,7 @@ _git_config () imap.sslverify imap.tunnel imap.user + init.templatedir instaweb.browser instaweb.httpd instaweb.local @@ -1753,19 +2186,29 @@ _git_config () instaweb.port interactive.singlekey log.date + log.decorate log.showroot mailmap.file man. man.viewer + merge. merge.conflictstyle merge.log merge.renameLimit + merge.renormalize merge.stat merge.tool merge.verbosity mergetool. mergetool.keepBackup + mergetool.keepTemporaries mergetool.prompt + notes.displayRef + notes.rewrite. + notes.rewrite.amend + notes.rewrite.rebase + notes.rewriteMode + notes.rewriteRef pack.compression pack.deltaCacheLimit pack.deltaCacheSize @@ -1776,31 +2219,42 @@ _git_config () pack.window pack.windowMemory pager. + pretty. pull.octopus pull.twohead push.default + rebase.autosquash rebase.stat + receive.autogc receive.denyCurrentBranch + receive.denyDeleteCurrent receive.denyDeletes receive.denyNonFastForwards receive.fsckObjects receive.unpackLimit + receive.updateserverinfo + remotes. repack.usedeltabaseoffset rerere.autoupdate rerere.enabled + sendemail. sendemail.aliasesfile - sendemail.aliasesfiletype + sendemail.aliasfiletype sendemail.bcc sendemail.cc sendemail.cccmd sendemail.chainreplyto sendemail.confirm sendemail.envelopesender + sendemail.from + sendemail.identity sendemail.multiedit sendemail.signedoffbycc + sendemail.smtpdomain sendemail.smtpencryption sendemail.smtppass sendemail.smtpserver + sendemail.smtpserveroption sendemail.smtpserverport sendemail.smtpuser sendemail.suppresscc @@ -1811,6 +2265,8 @@ _git_config () showbranch.default status.relativePaths status.showUntrackedFiles + status.submodulesummary + submodule. tar.umask transfer.unpackLimit url. @@ -1858,7 +2314,6 @@ _git_reset () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--merge --mixed --hard --soft --patch" @@ -1870,7 +2325,6 @@ _git_reset () _git_revert () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--edit --mainline --no-edit --no-commit --signoff" @@ -1884,7 +2338,6 @@ _git_rm () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--cached --dry-run --ignore-unmatch --quiet" @@ -1898,7 +2351,6 @@ _git_shortlog () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -1916,15 +2368,14 @@ _git_show () { __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --pretty=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--pretty=}" return ;; --format=*) - __gitcomp "$__git_log_pretty_formats + __gitcomp "$__git_log_pretty_formats $(__git_pretty_aliases) " "" "${cur##--format=}" return ;; @@ -1940,7 +2391,6 @@ _git_show () _git_show_branch () { - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp " @@ -1957,7 +2407,6 @@ _git_show_branch () _git_stash () { - local cur="${COMP_WORDS[COMP_CWORD]}" local save_opts='--keep-index --no-keep-index --quiet --patch' local subcommands='save list show apply clear drop pop create branch' local subcommand="$(__git_find_on_cmdline "$subcommands")" @@ -2002,7 +2451,6 @@ _git_submodule () local subcommands="add status init update summary foreach sync" if [ -z "$(__git_find_on_cmdline "$subcommands")" ]; then - local cur="${COMP_WORDS[COMP_CWORD]}" case "$cur" in --*) __gitcomp "--quiet --cached" @@ -2021,7 +2469,7 @@ _git_svn () init fetch clone rebase dcommit log find-rev set-tree commit-diff info create-ignore propget proplist show-ignore show-externals branch tag blame - migrate + migrate mkdirs reset gc " local subcommand="$(__git_find_on_cmdline "$subcommands")" if [ -z "$subcommand" ]; then @@ -2046,7 +2494,6 @@ _git_svn () --edit --rmdir --find-copies-harder --copy-similarity= " - local cur="${COMP_WORDS[COMP_CWORD]}" case "$subcommand,$cur" in fetch,--*) __gitcomp "--revision= --fetch-all $fc_opts" @@ -2068,7 +2515,7 @@ _git_svn () __gitcomp "--stdin $cmt_opts $fc_opts" ;; create-ignore,--*|propget,--*|proplist,--*|show-ignore,--*|\ - show-externals,--*) + show-externals,--*|mkdirs,--*) __gitcomp "--revision=" ;; log,--*) @@ -2105,6 +2552,9 @@ _git_svn () --no-auth-cache --username= " ;; + reset,--*) + __gitcomp "--revision= --parent" + ;; *) COMPREPLY=() ;; @@ -2115,8 +2565,8 @@ _git_svn () _git_tag () { local i c=1 f=0 - while [ $c -lt $COMP_CWORD ]; do - i="${COMP_WORDS[c]}" + while [ $c -lt $cword ]; do + i="${words[c]}" case "$i" in -d|-v) __gitcomp "$(__git_tags)" @@ -2129,7 +2579,7 @@ _git_tag () c=$((++c)) done - case "${COMP_WORDS[COMP_CWORD-1]}" in + case "$prev" in -m|-F) COMPREPLY=() ;; @@ -2146,12 +2596,28 @@ _git_tag () esac } +_git_whatchanged () +{ + _git_log +} + _git () { local i c=1 command __git_dir - while [ $c -lt $COMP_CWORD ]; do - i="${COMP_WORDS[c]}" + if [[ -n ${ZSH_VERSION-} ]]; then + emulate -L bash + setopt KSH_TYPESET + + # workaround zsh's bug that leaves 'words' as a special + # variable in versions < 4.3.12 + typeset -h words + fi + + local cur words cword prev + _get_comp_words_by_ref -n =: cur words cword prev + while [ $c -lt $cword ]; do + i="${words[c]}" case "$i" in --git-dir=*) __git_dir="${i#--git-dir=}" ;; --bare) __git_dir="." ;; @@ -2163,7 +2629,7 @@ _git () done if [ -z "$command" ]; then - case "${COMP_WORDS[COMP_CWORD]}" in + case "$cur" in --*) __gitcomp " --paginate --no-pager @@ -2182,70 +2648,32 @@ _git () return fi + local completion_func="_git_${command//-/_}" + declare -f $completion_func >/dev/null && $completion_func && return + local expansion=$(__git_aliased_command "$command") - [ "$expansion" ] && command="$expansion" - - case "$command" in - am) _git_am ;; - add) _git_add ;; - apply) _git_apply ;; - archive) _git_archive ;; - bisect) _git_bisect ;; - bundle) _git_bundle ;; - branch) _git_branch ;; - checkout) _git_checkout ;; - cherry) _git_cherry ;; - cherry-pick) _git_cherry_pick ;; - clean) _git_clean ;; - clone) _git_clone ;; - commit) _git_commit ;; - config) _git_config ;; - describe) _git_describe ;; - diff) _git_diff ;; - difftool) _git_difftool ;; - fetch) _git_fetch ;; - format-patch) _git_format_patch ;; - fsck) _git_fsck ;; - gc) _git_gc ;; - grep) _git_grep ;; - help) _git_help ;; - init) _git_init ;; - log) _git_log ;; - ls-files) _git_ls_files ;; - ls-remote) _git_ls_remote ;; - ls-tree) _git_ls_tree ;; - merge) _git_merge;; - mergetool) _git_mergetool;; - merge-base) _git_merge_base ;; - mv) _git_mv ;; - name-rev) _git_name_rev ;; - pull) _git_pull ;; - push) _git_push ;; - rebase) _git_rebase ;; - remote) _git_remote ;; - replace) _git_replace ;; - reset) _git_reset ;; - revert) _git_revert ;; - rm) _git_rm ;; - send-email) _git_send_email ;; - shortlog) _git_shortlog ;; - show) _git_show ;; - show-branch) _git_show_branch ;; - stash) _git_stash ;; - stage) _git_add ;; - submodule) _git_submodule ;; - svn) _git_svn ;; - tag) _git_tag ;; - whatchanged) _git_log ;; - *) COMPREPLY=() ;; - esac + if [ -n "$expansion" ]; then + completion_func="_git_${expansion//-/_}" + declare -f $completion_func >/dev/null && $completion_func + fi } _gitk () { + if [[ -n ${ZSH_VERSION-} ]]; then + emulate -L bash + setopt KSH_TYPESET + + # workaround zsh's bug that leaves 'words' as a special + # variable in versions < 4.3.12 + typeset -h words + fi + + local cur words cword prev + _get_comp_words_by_ref -n =: cur words cword prev + __git_has_doubledash && return - local cur="${COMP_WORDS[COMP_CWORD]}" local g="$(__gitdir)" local merge="" if [ -f "$g/MERGE_HEAD" ]; then @@ -2277,3 +2705,33 @@ if [ Cygwin = "$(uname -o 2>/dev/null)" ]; then complete -o bashdefault -o default -o nospace -F _git git.exe 2>/dev/null \ || complete -o default -o nospace -F _git git.exe fi + +if [[ -n ${ZSH_VERSION-} ]]; then + __git_shopt () { + local option + if [ $# -ne 2 ]; then + echo "USAGE: $0 (-q|-s|-u) <option>" >&2 + return 1 + fi + case "$2" in + nullglob) + option="$2" + ;; + *) + echo "$0: invalid option: $2" >&2 + return 1 + esac + case "$1" in + -q) setopt | grep -q "$option" ;; + -u) unsetopt "$option" ;; + -s) setopt "$option" ;; + *) + echo "$0: invalid flag: $1" >&2 + return 1 + esac + } +else + __git_shopt () { + shopt "$@" + } +fi diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el index 7f4c792978..d351cfb6e7 100644 --- a/contrib/emacs/git-blame.el +++ b/contrib/emacs/git-blame.el @@ -79,6 +79,7 @@ ;;; Code: (eval-when-compile (require 'cl)) ; to use `push', `pop' +(require 'format-spec) (defface git-blame-prefix-face '((((background dark)) (:foreground "gray" diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 214930a021..65c95d9d5a 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1310,6 +1310,13 @@ The FILES list must be sorted." (when sign-off (git-append-sign-off committer-name committer-email))) buffer)) +(define-derived-mode git-log-edit-mode log-edit-mode "Git-Log-Edit" + "Major mode for editing git log messages. + +Set up git-specific `font-lock-keywords' for `log-edit-mode'." + (set (make-local-variable 'font-lock-defaults) + '(git-log-edit-font-lock-keywords t t))) + (defun git-commit-file () "Commit the marked file(s), asking for a commit message." (interactive) @@ -1335,9 +1342,9 @@ The FILES list must be sorted." (git-setup-log-buffer buffer (git-get-merge-heads) author-name author-email subject date)) (if (boundp 'log-edit-diff-function) (log-edit 'git-do-commit nil '((log-edit-listfun . git-log-edit-files) - (log-edit-diff-function . git-log-edit-diff)) buffer) - (log-edit 'git-do-commit nil 'git-log-edit-files buffer)) - (setq font-lock-keywords (font-lock-compile-keywords git-log-edit-font-lock-keywords)) + (log-edit-diff-function . git-log-edit-diff)) buffer 'git-log-edit-mode) + (log-edit 'git-do-commit nil 'git-log-edit-files buffer + 'git-log-edit-mode)) (setq paragraph-separate (concat (regexp-quote git-log-msg-separator) "$\\|Author: \\|Date: \\|Merge: \\|Signed-off-by: \\|\f\\|[ ]*$")) (setq buffer-file-coding-system coding-system) (re-search-forward (regexp-quote (concat git-log-msg-separator "\n")) nil t)))) diff --git a/contrib/examples/builtin-fetch--tool.c b/contrib/examples/builtin-fetch--tool.c index cd10dbcbc9..3140e405fa 100644 --- a/contrib/examples/builtin-fetch--tool.c +++ b/contrib/examples/builtin-fetch--tool.c @@ -148,7 +148,7 @@ static int append_fetch_head(FILE *fp, what = remote_name + 10; } else if (!strncmp(remote_name, "refs/remotes/", 13)) { - kind = "remote branch"; + kind = "remote-tracking branch"; what = remote_name + 13; } else { diff --git a/contrib/examples/git-commit.sh b/contrib/examples/git-commit.sh index 5c72f655c7..23ffb028d1 100755 --- a/contrib/examples/git-commit.sh +++ b/contrib/examples/git-commit.sh @@ -631,7 +631,7 @@ then if test -z "$quiet" then commit=`git diff-tree --always --shortstat --pretty="format:%h: %s"\ - --summary --root HEAD --` + --abbrev --summary --root HEAD --` echo "Created${initial_commit:+ initial} commit $commit" fi fi diff --git a/contrib/examples/git-fetch.sh b/contrib/examples/git-fetch.sh index e44af2c86d..a314273bd5 100755 --- a/contrib/examples/git-fetch.sh +++ b/contrib/examples/git-fetch.sh @@ -127,10 +127,12 @@ then orig_head=$(git rev-parse --verify HEAD 2>/dev/null) fi -# Allow --notags from remote.$1.tagopt +# Allow --tags/--notags from remote.$1.tagopt case "$tags$no_tags" in '') case "$(git config --get "remote.$1.tagopt")" in + --tags) + tags=t ;; --no-tags) no_tags=t ;; esac diff --git a/contrib/examples/git-merge.sh b/contrib/examples/git-merge.sh index 500635fe4b..7b922c3948 100755 --- a/contrib/examples/git-merge.sh +++ b/contrib/examples/git-merge.sh @@ -15,7 +15,10 @@ log add list of one-line log to merge commit message squash create a single commit instead of doing a merge commit perform a commit if the merge succeeds (default) ff allow fast-forward (default) +ff-only abort if fast-forward is not possible +rerere-autoupdate update index with any reused conflict resolution s,strategy= merge strategy to use +X= option for selected merge strategy m,message= message to be used for the merge commit (if any) " @@ -25,25 +28,32 @@ require_work_tree cd_to_toplevel test -z "$(git ls-files -u)" || - die "You are in the middle of a conflicted merge." + die "Merge is not possible because you have unmerged files." + +! test -e "$GIT_DIR/MERGE_HEAD" || + die 'You have not concluded your merge (MERGE_HEAD exists).' LF=' ' all_strategies='recur recursive octopus resolve stupid ours subtree' +all_strategies="$all_strategies recursive-ours recursive-theirs" +not_strategies='base file index tree' default_twohead_strategies='recursive' default_octopus_strategies='octopus' no_fast_forward_strategies='subtree ours' -no_trivial_strategies='recursive recur subtree ours' +no_trivial_strategies='recursive recur subtree ours recursive-ours recursive-theirs' use_strategies= +xopt= allow_fast_forward=t +fast_forward_only= allow_trivial_merge=t -squash= no_commit= log_arg= +squash= no_commit= log_arg= rr_arg= dropsave() { rm -f -- "$GIT_DIR/MERGE_HEAD" "$GIT_DIR/MERGE_MSG" \ - "$GIT_DIR/MERGE_STASH" || exit 1 + "$GIT_DIR/MERGE_STASH" "$GIT_DIR/MERGE_MODE" || exit 1 } savestate() { @@ -130,21 +140,34 @@ finish () { merge_name () { remote="$1" rh=$(git rev-parse --verify "$remote^0" 2>/dev/null) || return - bh=$(git show-ref -s --verify "refs/heads/$remote" 2>/dev/null) - if test "$rh" = "$bh" - then - echo "$rh branch '$remote' of ." - elif truname=$(expr "$remote" : '\(.*\)~[1-9][0-9]*$') && + if truname=$(expr "$remote" : '\(.*\)~[0-9]*$') && git show-ref -q --verify "refs/heads/$truname" 2>/dev/null then echo "$rh branch '$truname' (early part) of ." - elif test "$remote" = "FETCH_HEAD" -a -r "$GIT_DIR/FETCH_HEAD" + return + fi + if found_ref=$(git rev-parse --symbolic-full-name --verify \ + "$remote" 2>/dev/null) + then + expanded=$(git check-ref-format --branch "$remote") || + exit + if test "${found_ref#refs/heads/}" != "$found_ref" + then + echo "$rh branch '$expanded' of ." + return + elif test "${found_ref#refs/remotes/}" != "$found_ref" + then + echo "$rh remote branch '$expanded' of ." + return + fi + fi + if test "$remote" = "FETCH_HEAD" -a -r "$GIT_DIR/FETCH_HEAD" then sed -e 's/ not-for-merge / /' -e 1q \ "$GIT_DIR/FETCH_HEAD" - else - echo "$rh commit '$remote'" + return fi + echo "$rh commit '$remote'" } parse_config () { @@ -171,16 +194,36 @@ parse_config () { --no-ff) test "$squash" != t || die "You cannot combine --squash with --no-ff." + test "$fast_forward_only" != t || + die "You cannot combine --ff-only with --no-ff." allow_fast_forward=f ;; + --ff-only) + test "$allow_fast_forward" != f || + die "You cannot combine --ff-only with --no-ff." + fast_forward_only=t ;; + --rerere-autoupdate|--no-rerere-autoupdate) + rr_arg=$1 ;; -s|--strategy) shift case " $all_strategies " in *" $1 "*) - use_strategies="$use_strategies$1 " ;; + use_strategies="$use_strategies$1 " + ;; *) - die "available strategies are: $all_strategies" ;; + case " $not_strategies " in + *" $1 "*) + false + esac && + type "git-merge-$1" >/dev/null 2>&1 || + die "available strategies are: $all_strategies" + use_strategies="$use_strategies$1 " + ;; esac ;; + -X) + shift + xopt="${xopt:+$xopt }$(git rev-parse --sq-quote "--$1")" + ;; -m|--message) shift merge_msg="$1" @@ -244,6 +287,10 @@ then exit 1 fi + test "$squash" != t || + die "Squash commit into empty head not supported yet" + test "$allow_fast_forward" = t || + die "Non-fast-forward into an empty head does not make sense" rh=$(git rev-parse --verify "$1^0") || die "$1 - not something we can merge" @@ -260,12 +307,18 @@ else # the given message. If remote is invalid we will die # later in the common codepath so we discard the error # in this loop. - merge_name=$(for remote + merge_msg="$( + for remote do merge_name "$remote" - done | git fmt-merge-msg $log_arg - ) - merge_msg="${merge_msg:+$merge_msg$LF$LF}$merge_name" + done | + if test "$have_message" = t + then + git fmt-merge-msg -m "$merge_msg" $log_arg + else + git fmt-merge-msg $log_arg + fi + )" fi head=$(git rev-parse --verify "$head_arg"^0) || usage @@ -334,7 +387,7 @@ case "$#" in common=$(git merge-base --all $head "$@") ;; *) - common=$(git show-branch --merge-base $head "$@") + common=$(git merge-base --all --octopus $head "$@") ;; esac echo "$head" >"$GIT_DIR/ORIG_HEAD" @@ -372,8 +425,8 @@ t,1,"$head",*) # We are not doing octopus, not fast-forward, and have only # one common. git update-index --refresh 2>/dev/null - case "$allow_trivial_merge" in - t) + case "$allow_trivial_merge,$fast_forward_only" in + t,) # See if it is really trivial. git var GIT_COMMITTER_IDENT >/dev/null || exit echo "Trying really trivial in-index merge..." @@ -412,6 +465,11 @@ t,1,"$head",*) ;; esac +if test "$fast_forward_only" = t +then + die "Not possible to fast-forward, aborting." +fi + # We are going to make a new commit. git var GIT_COMMITTER_IDENT >/dev/null || exit @@ -450,7 +508,7 @@ do # Remember which strategy left the state in the working tree wt_strategy=$strategy - git-merge-$strategy $common -- "$head_arg" "$@" + eval 'git-merge-$strategy '"$xopt"' $common -- "$head_arg" "$@"' exit=$? if test "$no_commit" = t && test "$exit" = 0 then @@ -488,9 +546,9 @@ if test '' != "$result_tree" then if test "$allow_fast_forward" = "t" then - parents=$(git show-branch --independent "$head" "$@") + parents=$(git merge-base --independent "$head" "$@") else - parents=$(git rev-parse "$head" "$@") + parents=$(git rev-parse "$head" "$@") fi parents=$(echo "$parents" | sed -e 's/^/-p /') result_commit=$(printf '%s\n' "$merge_msg" | git commit-tree $result_tree $parents) || exit @@ -532,7 +590,15 @@ else do echo $remote done >"$GIT_DIR/MERGE_HEAD" - printf '%s\n' "$merge_msg" >"$GIT_DIR/MERGE_MSG" + printf '%s\n' "$merge_msg" >"$GIT_DIR/MERGE_MSG" || + die "Could not write to $GIT_DIR/MERGE_MSG" + if test "$allow_fast_forward" != t + then + printf "%s" no-ff + else + : + fi >"$GIT_DIR/MERGE_MODE" || + die "Could not write to $GIT_DIR/MERGE_MODE" fi if test "$merge_was_ok" = t @@ -549,6 +615,6 @@ Conflicts: sed -e 's/^[^ ]* / /' | uniq } >>"$GIT_DIR/MERGE_MSG" - git rerere + git rerere $rr_arg die "Automatic merge failed; fix conflicts and then commit the result." fi diff --git a/contrib/examples/git-notes.sh b/contrib/examples/git-notes.sh new file mode 100755 index 0000000000..e642e47d9f --- /dev/null +++ b/contrib/examples/git-notes.sh @@ -0,0 +1,121 @@ +#!/bin/sh + +USAGE="(edit [-F <file> | -m <msg>] | show) [commit]" +. git-sh-setup + +test -z "$1" && usage +ACTION="$1"; shift + +test -z "$GIT_NOTES_REF" && GIT_NOTES_REF="$(git config core.notesref)" +test -z "$GIT_NOTES_REF" && GIT_NOTES_REF="refs/notes/commits" + +MESSAGE= +while test $# != 0 +do + case "$1" in + -m) + test "$ACTION" = "edit" || usage + shift + if test "$#" = "0"; then + die "error: option -m needs an argument" + else + if [ -z "$MESSAGE" ]; then + MESSAGE="$1" + else + MESSAGE="$MESSAGE + +$1" + fi + shift + fi + ;; + -F) + test "$ACTION" = "edit" || usage + shift + if test "$#" = "0"; then + die "error: option -F needs an argument" + else + if [ -z "$MESSAGE" ]; then + MESSAGE="$(cat "$1")" + else + MESSAGE="$MESSAGE + +$(cat "$1")" + fi + shift + fi + ;; + -*) + usage + ;; + *) + break + ;; + esac +done + +COMMIT=$(git rev-parse --verify --default HEAD "$@") || +die "Invalid commit: $@" + +case "$ACTION" in +edit) + if [ "${GIT_NOTES_REF#refs/notes/}" = "$GIT_NOTES_REF" ]; then + die "Refusing to edit notes in $GIT_NOTES_REF (outside of refs/notes/)" + fi + + MSG_FILE="$GIT_DIR/new-notes-$COMMIT" + GIT_INDEX_FILE="$MSG_FILE.idx" + export GIT_INDEX_FILE + + trap ' + test -f "$MSG_FILE" && rm "$MSG_FILE" + test -f "$GIT_INDEX_FILE" && rm "$GIT_INDEX_FILE" + ' 0 + + CURRENT_HEAD=$(git show-ref "$GIT_NOTES_REF" | cut -f 1 -d ' ') + if [ -z "$CURRENT_HEAD" ]; then + PARENT= + else + PARENT="-p $CURRENT_HEAD" + git read-tree "$GIT_NOTES_REF" || die "Could not read index" + fi + + if [ -z "$MESSAGE" ]; then + GIT_NOTES_REF= git log -1 $COMMIT | sed "s/^/#/" > "$MSG_FILE" + if [ ! -z "$CURRENT_HEAD" ]; then + git cat-file blob :$COMMIT >> "$MSG_FILE" 2> /dev/null + fi + core_editor="$(git config core.editor)" + ${GIT_EDITOR:-${core_editor:-${VISUAL:-${EDITOR:-vi}}}} "$MSG_FILE" + else + echo "$MESSAGE" > "$MSG_FILE" + fi + + grep -v ^# < "$MSG_FILE" | git stripspace > "$MSG_FILE".processed + mv "$MSG_FILE".processed "$MSG_FILE" + if [ -s "$MSG_FILE" ]; then + BLOB=$(git hash-object -w "$MSG_FILE") || + die "Could not write into object database" + git update-index --add --cacheinfo 0644 $BLOB $COMMIT || + die "Could not write index" + else + test -z "$CURRENT_HEAD" && + die "Will not initialise with empty tree" + git update-index --force-remove $COMMIT || + die "Could not update index" + fi + + TREE=$(git write-tree) || die "Could not write tree" + NEW_HEAD=$(echo Annotate $COMMIT | git commit-tree $TREE $PARENT) || + die "Could not annotate" + git update-ref -m "Annotate $COMMIT" \ + "$GIT_NOTES_REF" $NEW_HEAD $CURRENT_HEAD +;; +show) + git rev-parse -q --verify "$GIT_NOTES_REF":$COMMIT > /dev/null || + die "No note for commit $COMMIT." + git show "$GIT_NOTES_REF":$COMMIT +;; +*) + usage +esac diff --git a/contrib/examples/git-revert.sh b/contrib/examples/git-revert.sh index 49f00321b2..6bf155cbdb 100755 --- a/contrib/examples/git-revert.sh +++ b/contrib/examples/git-revert.sh @@ -26,6 +26,7 @@ require_work_tree cd_to_toplevel no_commit= +xopt= while case "$#" in 0) break ;; esac do case "$1" in @@ -44,6 +45,16 @@ do -x|--i-really-want-to-expose-my-private-commit-object-name) replay= ;; + -X?*) + xopt="$xopt$(git rev-parse --sq-quote "--${1#-X}")" + ;; + --strategy-option=*) + xopt="$xopt$(git rev-parse --sq-quote "--${1#--strategy-option=}")" + ;; + -X|--strategy-option) + shift + xopt="$xopt$(git rev-parse --sq-quote "--$1")" + ;; -*) usage ;; @@ -159,7 +170,7 @@ export GITHEAD_$head GITHEAD_$next # and $prev on top of us (when reverting), or the change between # $prev and $commit on top of us (when cherry-picking or replaying). -git-merge-recursive $base -- $head $next && +eval "git merge-recursive $xopt $base -- $head $next" && result=$(git-write-tree 2>/dev/null) || { mv -f .msg "$GIT_DIR/MERGE_MSG" { @@ -181,7 +192,6 @@ Conflicts: esac exit 1 } -echo >&2 "Finished one $me." # If we are cherry-pick, and if the merge did not result in # hand-editing, we will hit this commit and inherit the original diff --git a/contrib/examples/git-svnimport.perl b/contrib/examples/git-svnimport.perl index 4576c4a862..b09ff8f12f 100755 --- a/contrib/examples/git-svnimport.perl +++ b/contrib/examples/git-svnimport.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # This tool is copyright (c) 2005, Matthias Urlichs. # It is released under the Gnu Public License, version 2. @@ -289,7 +289,7 @@ my $current_rev = $opt_s || 1; unless(-d $git_dir) { system("git init"); die "Cannot init the GIT db at $git_tree: $?\n" if $?; - system("git read-tree"); + system("git read-tree --empty"); die "Cannot init an empty tree: $?\n" if $?; $last_branch = $opt_o; diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4 index 48059d0aa7..78e5b3aaf4 100755 --- a/contrib/fast-import/git-p4 +++ b/contrib/fast-import/git-p4 @@ -222,10 +222,10 @@ def p4CmdList(cmd, stdin=None, stdin_mode='w+b', cb=None): try: while True: entry = marshal.load(p4.stdout) - if cb is not None: - cb(entry) - else: - result.append(entry) + if cb is not None: + cb(entry) + else: + result.append(entry) except EOFError: pass exitCode = p4.wait() @@ -333,9 +333,13 @@ def gitBranchExists(branch): return proc.wait() == 0; _gitConfig = {} -def gitConfig(key): +def gitConfig(key, args = None): # set args to "--bool", for instance if not _gitConfig.has_key(key): - _gitConfig[key] = read_pipe("git config %s" % key, ignore_error=True).strip() + argsFilter = "" + if args != None: + argsFilter = "%s " % args + cmd = "git config %s%s" % (argsFilter, key) + _gitConfig[key] = read_pipe(cmd, ignore_error=True).strip() return _gitConfig[key] def p4BranchesInGit(branchesAreInRemotes = True): @@ -445,13 +449,26 @@ def p4ChangesForPaths(depotPaths, changeRange): changes = {} for line in output: - changeNum = int(line.split(" ")[1]) - changes[changeNum] = True + changeNum = int(line.split(" ")[1]) + changes[changeNum] = True changelist = changes.keys() changelist.sort() return changelist +def p4PathStartsWith(path, prefix): + # This method tries to remedy a potential mixed-case issue: + # + # If UserA adds //depot/DirA/file1 + # and UserB adds //depot/dira/file2 + # + # we may or may not have a problem. If you have core.ignorecase=true, + # we treat DirA and dira as the same directory + ignorecase = gitConfig("core.ignorecase", "--bool") == "true" + if ignorecase: + return path.lower().startswith(prefix.lower()) + return path.startswith(prefix) + class Command: def __init__(self): self.usage = "usage: %prog [options]" @@ -543,13 +560,13 @@ class P4Submit(Command): self.options = [ optparse.make_option("--verbose", dest="verbose", action="store_true"), optparse.make_option("--origin", dest="origin"), - optparse.make_option("-M", dest="detectRename", action="store_true"), + optparse.make_option("-M", dest="detectRenames", action="store_true"), ] self.description = "Submit changes from git to the perforce depot." self.usage += " [name of git branch to submit into perforce depot]" self.interactive = True self.origin = "" - self.detectRename = False + self.detectRenames = False self.verbose = False self.isWindows = (platform.system() == "Windows") @@ -570,7 +587,7 @@ class P4Submit(Command): continue if inDescriptionSection: - if line.startswith("Files:"): + if line.startswith("Files:") or line.startswith("Jobs:"): inDescriptionSection = False else: continue @@ -599,7 +616,7 @@ class P4Submit(Command): lastTab = path.rfind("\t") if lastTab != -1: path = path[:lastTab] - if not path.startswith(self.depotPath): + if not p4PathStartsWith(path, self.depotPath): continue else: inFilesSection = False @@ -613,7 +630,22 @@ class P4Submit(Command): def applyCommit(self, id): print "Applying %s" % (read_pipe("git log --max-count=1 --pretty=oneline %s" % id)) - diffOpts = ("", "-M")[self.detectRename] + + if not self.detectRenames: + # If not explicitly set check the config variable + self.detectRenames = gitConfig("git-p4.detectRenames").lower() == "true" + + if self.detectRenames: + diffOpts = "-M" + else: + diffOpts = "" + + if gitConfig("git-p4.detectCopies").lower() == "true": + diffOpts += " -C" + + if gitConfig("git-p4.detectCopiesHarder").lower() == "true": + diffOpts += " --find-copies-harder" + diff = read_pipe_lines("git diff-tree -r %s \"%s^\" \"%s\"" % (diffOpts, id, id)) filesToAdd = set() filesToDelete = set() @@ -637,11 +669,23 @@ class P4Submit(Command): filesToDelete.add(path) if path in filesToAdd: filesToAdd.remove(path) + elif modifier == "C": + src, dest = diff['src'], diff['dst'] + p4_system("integrate -Dt \"%s\" \"%s\"" % (src, dest)) + if diff['src_sha1'] != diff['dst_sha1']: + p4_system("edit \"%s\"" % (dest)) + if isModeExecChanged(diff['src_mode'], diff['dst_mode']): + p4_system("edit \"%s\"" % (dest)) + filesToChangeExecBit[dest] = diff['dst_mode'] + os.unlink(dest) + editedFiles.add(dest) elif modifier == "R": src, dest = diff['src'], diff['dst'] p4_system("integrate -Dt \"%s\" \"%s\"" % (src, dest)) - p4_system("edit \"%s\"" % (dest)) + if diff['src_sha1'] != diff['dst_sha1']: + p4_system("edit \"%s\"" % (dest)) if isModeExecChanged(diff['src_mode'], diff['dst_mode']): + p4_system("edit \"%s\"" % (dest)) filesToChangeExecBit[dest] = diff['dst_mode'] os.unlink(dest) editedFiles.add(dest) @@ -706,7 +750,9 @@ class P4Submit(Command): submitTemplate = self.prepareLogMessage(template, logMessage) if os.environ.has_key("P4DIFF"): del(os.environ["P4DIFF"]) - diff = p4_read_pipe("diff -du ...") + diff = "" + for editedFile in editedFiles: + diff += p4_read_pipe("diff -du %r" % editedFile) newdiff = "" for newFile in filesToAdd: @@ -732,7 +778,7 @@ class P4Submit(Command): if os.environ.has_key("P4EDITOR"): editor = os.environ.get("P4EDITOR") else: - editor = read_pipe("git var GIT_EDITOR") + editor = read_pipe("git var GIT_EDITOR").strip() system(editor + " " + fileName) response = "y" @@ -802,7 +848,7 @@ class P4Submit(Command): self.oldWorkingDirectory = os.getcwd() chdir(self.clientPath) - print "Syncronizing p4 checkout..." + print "Synchronizing p4 checkout..." p4_system("sync ...") self.check() @@ -832,6 +878,8 @@ class P4Submit(Command): return True class P4Sync(Command): + delete_actions = ( "delete", "move/delete", "purge" ) + def __init__(self): Command.__init__(self) self.options = [ @@ -880,6 +928,23 @@ class P4Sync(Command): if gitConfig("git-p4.syncFromOrigin") == "false": self.syncWithOrigin = False + # + # P4 wildcards are not allowed in filenames. P4 complains + # if you simply add them, but you can force it with "-f", in + # which case it translates them into %xx encoding internally. + # Search for and fix just these four characters. Do % last so + # that fixing it does not inadvertently create new %-escapes. + # + def wildcard_decode(self, path): + # Cannot have * in a filename in windows; untested as to + # what p4 would do in such a case. + if not self.isWindows: + path = path.replace("%2A", "*") + path = path.replace("%23", "#") \ + .replace("%40", "@") \ + .replace("%25", "%") + return path + def extractFilesFromCommit(self, commit): self.cloneExclude = [re.sub(r"\.\.\.$", "", path) for path in self.cloneExclude] @@ -889,11 +954,11 @@ class P4Sync(Command): path = commit["depotFile%s" % fnum] if [p for p in self.cloneExclude - if path.startswith (p)]: + if p4PathStartsWith(path, p)]: found = False else: found = [p for p in self.depotPaths - if path.startswith (p)] + if p4PathStartsWith(path, p)] if not found: fnum = fnum + 1 continue @@ -908,11 +973,27 @@ class P4Sync(Command): return files def stripRepoPath(self, path, prefixes): + if self.useClientSpec: + + # if using the client spec, we use the output directory + # specified in the client. For example, a view + # //depot/foo/branch/... //client/branch/foo/... + # will end up putting all foo/branch files into + # branch/foo/ + for val in self.clientSpecDirs: + if path.startswith(val[0]): + # replace the depot path with the client path + path = path.replace(val[0], val[1][1]) + # now strip out the client (//client/...) + path = re.sub("^(//[^/]+/)", '', path) + # the rest is all path + return path + if self.keepRepoPath: prefixes = [re.sub("^(//[^/]+/).*", r'\1', prefixes[0])] for p in prefixes: - if path.startswith(p): + if p4PathStartsWith(path, p): path = path[len(p):] return path @@ -923,7 +1004,7 @@ class P4Sync(Command): while commit.has_key("depotFile%s" % fnum): path = commit["depotFile%s" % fnum] found = [p for p in self.depotPaths - if path.startswith (p)] + if p4PathStartsWith(path, p)] if not found: fnum = fnum + 1 continue @@ -952,12 +1033,13 @@ class P4Sync(Command): # - helper for streamP4Files def streamOneP4File(self, file, contents): - if file["type"] == "apple": - print "\nfile %s is a strange apple file that forks. Ignoring" % \ - file['depotFile'] - return + if file["type"] == "apple": + print "\nfile %s is a strange apple file that forks. Ignoring" % \ + file['depotFile'] + return relPath = self.stripRepoPath(file['depotFile'], self.branchPrefixes) + relPath = self.wildcard_decode(relPath) if verbose: sys.stderr.write("%s\n" % relPath) @@ -967,9 +1049,8 @@ class P4Sync(Command): elif file["type"] == "symlink": mode = "120000" # p4 print on a symlink contains "target\n", so strip it off - last = contents.pop() - last = last[:-1] - contents.append(last) + data = ''.join(contents) + contents = [data[:-1]] if self.isWindows and file["type"].endswith("text"): mangled = [] @@ -1004,22 +1085,22 @@ class P4Sync(Command): # handle another chunk of streaming data def streamP4FilesCb(self, marshalled): - if marshalled.has_key('depotFile') and self.stream_have_file_info: - # start of a new file - output the old one first - self.streamOneP4File(self.stream_file, self.stream_contents) - self.stream_file = {} - self.stream_contents = [] - self.stream_have_file_info = False + if marshalled.has_key('depotFile') and self.stream_have_file_info: + # start of a new file - output the old one first + self.streamOneP4File(self.stream_file, self.stream_contents) + self.stream_file = {} + self.stream_contents = [] + self.stream_have_file_info = False - # pick up the new file information... for the - # 'data' field we need to append to our array - for k in marshalled.keys(): - if k == 'data': - self.stream_contents.append(marshalled['data']) - else: - self.stream_file[k] = marshalled[k] + # pick up the new file information... for the + # 'data' field we need to append to our array + for k in marshalled.keys(): + if k == 'data': + self.stream_contents.append(marshalled['data']) + else: + self.stream_file[k] = marshalled[k] - self.stream_have_file_info = True + self.stream_have_file_info = True # Stream directly from "p4 files" into "git fast-import" def streamP4Files(self, files): @@ -1031,16 +1112,16 @@ class P4Sync(Command): includeFile = True for val in self.clientSpecDirs: if f['path'].startswith(val[0]): - if val[1] <= 0: + if val[1][0] <= 0: includeFile = False break if includeFile: filesForCommit.append(f) - if f['action'] not in ('delete', 'purge'): - filesToRead.append(f) - else: + if f['action'] in self.delete_actions: filesToDelete.append(f) + else: + filesToRead.append(f) # deleted files... for f in filesToDelete: @@ -1051,14 +1132,14 @@ class P4Sync(Command): self.stream_contents = [] self.stream_have_file_info = False - # curry self argument - def streamP4FilesCbSelf(entry): - self.streamP4FilesCb(entry) + # curry self argument + def streamP4FilesCbSelf(entry): + self.streamP4FilesCb(entry) - p4CmdList("-x - print", - '\n'.join(['%s#%s' % (f['path'], f['rev']) + p4CmdList("-x - print", + '\n'.join(['%s#%s' % (f['path'], f['rev']) for f in filesToRead]), - cb=streamP4FilesCbSelf) + cb=streamP4FilesCbSelf) # do the last chunk if self.stream_file.has_key('depotFile'): @@ -1067,7 +1148,7 @@ class P4Sync(Command): def commit(self, details, files, branch, branchPrefixes, parent = ""): epoch = details["time"] author = details["user"] - self.branchPrefixes = branchPrefixes + self.branchPrefixes = branchPrefixes if self.verbose: print "commit into %s" % branch @@ -1076,10 +1157,10 @@ class P4Sync(Command): # create a commit. new_files = [] for f in files: - if [p for p in branchPrefixes if f['path'].startswith(p)]: + if [p for p in branchPrefixes if p4PathStartsWith(f['path'], p)]: new_files.append (f) else: - sys.stderr.write("Ignoring file outside of prefix: %s\n" % path) + sys.stderr.write("Ignoring file outside of prefix: %s\n" % f['path']) self.gitStream.write("commit %s\n" % branch) # gitStream.write("mark :%s\n" % details["change"]) @@ -1126,7 +1207,7 @@ class P4Sync(Command): cleanedFiles = {} for info in files: - if info["action"] in ("delete", "purge"): + if info["action"] in self.delete_actions: continue cleanedFiles[info["depotFile"]] = info["rev"] @@ -1172,7 +1253,7 @@ class P4Sync(Command): s = '' for (key, val) in self.users.items(): - s += "%s\t%s\n" % (key.expandtabs(1), val.expandtabs(1)) + s += "%s\t%s\n" % (key.expandtabs(1), val.expandtabs(1)) open(self.getUserCacheFilename(), "wb").write(s) self.userMapFromPerforceServer = True @@ -1240,7 +1321,7 @@ class P4Sync(Command): source = paths[0] destination = paths[1] ## HACK - if source.startswith(self.depotPaths[0]) and destination.startswith(self.depotPaths[0]): + if p4PathStartsWith(source, self.depotPaths[0]) and p4PathStartsWith(destination, self.depotPaths[0]): source = source[len(self.depotPaths[0]):-4] destination = destination[len(self.depotPaths[0]):-4] @@ -1428,7 +1509,7 @@ class P4Sync(Command): print "Doing initial import of %s from revision %s into %s" % (' '.join(self.depotPaths), revision, self.branch) details = { "user" : "git perforce import user", "time" : int(time.time()) } - details["desc"] = ("Initial import of %s from the state at revision %s" + details["desc"] = ("Initial import of %s from the state at revision %s\n" % (' '.join(self.depotPaths), revision)) details["change"] = revision newestRevision = 0 @@ -1439,9 +1520,16 @@ class P4Sync(Command): % (p, revision) for p in self.depotPaths])): - if info['code'] == 'error': + if 'code' in info and info['code'] == 'error': sys.stderr.write("p4 returned an error: %s\n" % info['data']) + if info['data'].find("must refer to client") >= 0: + sys.stderr.write("This particular p4 error is misleading.\n") + sys.stderr.write("Perhaps the depot path was misspelled.\n"); + sys.stderr.write("Depot path: %s\n" % " ".join(self.depotPaths)) + sys.exit(1) + if 'p4ExitCode' in info: + sys.stderr.write("p4 exitcode: %s\n" % info['p4ExitCode']) sys.exit(1) @@ -1449,7 +1537,7 @@ class P4Sync(Command): if change > newestRevision: newestRevision = change - if info["action"] in ("delete", "purge"): + if info["action"] in self.delete_actions: # don't increase the file cnt, otherwise details["depotFile123"] will have gaps! #fileCnt = fileCnt + 1 continue @@ -1474,19 +1562,45 @@ class P4Sync(Command): for entry in specList: for k,v in entry.iteritems(): if k.startswith("View"): + + # p4 has these %%1 to %%9 arguments in specs to + # reorder paths; which we can't handle (yet :) + if re.match('%%\d', v) != None: + print "Sorry, can't handle %%n arguments in client specs" + sys.exit(1) + if v.startswith('"'): start = 1 else: start = 0 index = v.find("...") + + # save the "client view"; i.e the RHS of the view + # line that tells the client where to put the + # files for this view. + cv = v[index+3:].strip() # +3 to remove previous '...' + + # if the client view doesn't end with a + # ... wildcard, then we're going to mess up the + # output directory, so fail gracefully. + if not cv.endswith('...'): + print 'Sorry, client view in "%s" needs to end with wildcard' % (k) + sys.exit(1) + cv=cv[:-3] + + # now save the view; +index means included, -index + # means it should be filtered out. v = v[start:index] if v.startswith("-"): v = v[1:] - temp[v] = -len(v) + include = -len(v) else: - temp[v] = len(v) + include = len(v) + + temp[v] = (include, cv) + self.clientSpecDirs = temp.items() - self.clientSpecDirs.sort( lambda x, y: abs( y[1] ) - abs( x[1] ) ) + self.clientSpecDirs.sort( lambda x, y: abs( y[1][0] ) - abs( x[1][0] ) ) def run(self, args): self.depotPaths = [] @@ -1666,6 +1780,10 @@ class P4Sync(Command): changes.sort() else: + # catch "git-p4 sync" with no new branches, in a repo that + # does not have any existing git-p4 branches + if len(args) == 0 and not self.p4BranchesInGit: + die("No remote p4 branches. Perhaps you never did \"git p4 clone\" in here."); if self.verbose: print "Getting p4 changes for %s...%s" % (', '.join(self.depotPaths), self.changeRange) @@ -1746,10 +1864,13 @@ class P4Clone(P4Sync): help="where to leave result of the clone"), optparse.make_option("-/", dest="cloneExclude", action="append", type="string", - help="exclude depot path") + help="exclude depot path"), + optparse.make_option("--bare", dest="cloneBare", + action="store_true", default=False), ] self.cloneDestination = None self.needsGit = False + self.cloneBare = False # This is required for the "append" cloneExclude action def ensure_value(self, attr, value): @@ -1789,11 +1910,16 @@ class P4Clone(P4Sync): self.cloneDestination = self.defaultDestination(args) print "Importing from %s into %s" % (', '.join(depotPaths), self.cloneDestination) + if not os.path.exists(self.cloneDestination): os.makedirs(self.cloneDestination) chdir(self.cloneDestination) - system("git init") - self.gitdir = os.getcwd() + "/.git" + + init_cmd = [ "git", "init" ] + if self.cloneBare: + init_cmd.append("--bare") + subprocess.check_call(init_cmd) + if not P4Sync.run(self, depotPaths): return False if self.branch != "master": @@ -1803,7 +1929,8 @@ class P4Clone(P4Sync): masterbranch = "refs/heads/p4/master" if gitBranchExists(masterbranch): system("git branch master %s" % masterbranch) - system("git checkout -f") + if not self.cloneBare: + system("git checkout -f") else: print "Could not detect main branch. No checkout/master branch created." diff --git a/contrib/fast-import/git-p4.txt b/contrib/fast-import/git-p4.txt index 49b335921a..e09da445b6 100644 --- a/contrib/fast-import/git-p4.txt +++ b/contrib/fast-import/git-p4.txt @@ -191,6 +191,11 @@ git-p4.useclientspec git config [--global] git-p4.useclientspec false +The P4CLIENT environment variable should be correctly set for p4 to be +able to find the relevant client. This client spec will be used to +both filter the files cloned by git and set the directory layout as +specified in the client (this implies --keep-path style semantics). + Implementation Details... ========================= diff --git a/contrib/fast-import/import-directories.perl b/contrib/fast-import/import-directories.perl index 5782d80e26..7f3afa5ac4 100755 --- a/contrib/fast-import/import-directories.perl +++ b/contrib/fast-import/import-directories.perl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl # # Copyright 2008-2009 Peter Krefting <peter@softwolves.pp.se> # @@ -140,6 +140,7 @@ by whitespace or other characters. # Globals use strict; +use warnings; use integer; my $crlfmode = 0; my @revs; @@ -344,7 +345,7 @@ sub parsekeyvaluepair Key and value strings may be enclosed in quotes, in which case whitespace inside the quotes is preserved. Additionally, an equal -sign may be included in the key by preceeding it with a backslash. +sign may be included in the key by preceding it with a backslash. For example: "key1 "=value1 diff --git a/contrib/fast-import/import-zips.py b/contrib/fast-import/import-zips.py index 7051a83a59..82f5ed3ddc 100755 --- a/contrib/fast-import/import-zips.py +++ b/contrib/fast-import/import-zips.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python ## zip archive frontend for git-fast-import ## diff --git a/contrib/git-resurrect.sh b/contrib/git-resurrect.sh index c364dda696..a4ed4c3c62 100755 --- a/contrib/git-resurrect.sh +++ b/contrib/git-resurrect.sh @@ -9,6 +9,7 @@ other/Merge <other> into <name> (respectively) commit subjects, which is rather slow but allows you to resurrect other people's topic branches." +OPTIONS_KEEPDASHDASH= OPTIONS_SPEC="\ git resurrect $USAGE -- diff --git a/contrib/git-shell-commands/README b/contrib/git-shell-commands/README new file mode 100644 index 0000000000..438463b160 --- /dev/null +++ b/contrib/git-shell-commands/README @@ -0,0 +1,18 @@ +Sample programs callable through git-shell. Place a directory named +'git-shell-commands' in the home directory of a user whose shell is +git-shell. Then anyone logging in as that user will be able to run +executables in the 'git-shell-commands' directory. + +Provided commands: + +help: Prints out the names of available commands. When run +interactively, git-shell will automatically run 'help' on startup, +provided it exists. + +list: Displays any bare repository whose name ends with ".git" under +user's home directory. No other git repositories are visible, +although they might be clonable through git-shell. 'list' is designed +to minimize the number of calls to git that must be made in finding +available repositories; if your setup has additional repositories that +should be user-discoverable, you may wish to modify 'list' +accordingly. diff --git a/contrib/git-shell-commands/help b/contrib/git-shell-commands/help new file mode 100755 index 0000000000..535770c6ec --- /dev/null +++ b/contrib/git-shell-commands/help @@ -0,0 +1,18 @@ +#!/bin/sh + +if tty -s +then + echo "Run 'help' for help, or 'exit' to leave. Available commands:" +else + echo "Run 'help' for help. Available commands:" +fi + +cd "$(dirname "$0")" + +for cmd in * +do + case "$cmd" in + help) ;; + *) [ -f "$cmd" ] && [ -x "$cmd" ] && echo "$cmd" ;; + esac +done diff --git a/contrib/git-shell-commands/list b/contrib/git-shell-commands/list new file mode 100755 index 0000000000..6f89938821 --- /dev/null +++ b/contrib/git-shell-commands/list @@ -0,0 +1,10 @@ +#!/bin/sh + +print_if_bare_repo=' + if "$(git --git-dir="$1" rev-parse --is-bare-repository)" = true + then + printf "%s\n" "${1#./}" + fi +' + +find -type d -name "*.git" -exec sh -c "$print_if_bare_repo" -- \{} \; -prune 2>/dev/null diff --git a/contrib/hg-to-git/hg-to-git.py b/contrib/hg-to-git/hg-to-git.py index 2a6839d81e..046cb2b268 100755 --- a/contrib/hg-to-git/hg-to-git.py +++ b/contrib/hg-to-git/hg-to-git.py @@ -1,4 +1,4 @@ -#! /usr/bin/python +#!/usr/bin/env python """ hg-to-git.py - A Mercurial to GIT converter @@ -59,14 +59,14 @@ def getgitenv(user, date): elems = re.compile('(.*?)\s+<(.*)>').match(user) if elems: env += 'export GIT_AUTHOR_NAME="%s" ;' % elems.group(1) - env += 'export GIT_COMMITER_NAME="%s" ;' % elems.group(1) + env += 'export GIT_COMMITTER_NAME="%s" ;' % elems.group(1) env += 'export GIT_AUTHOR_EMAIL="%s" ;' % elems.group(2) - env += 'export GIT_COMMITER_EMAIL="%s" ;' % elems.group(2) + env += 'export GIT_COMMITTER_EMAIL="%s" ;' % elems.group(2) else: env += 'export GIT_AUTHOR_NAME="%s" ;' % user - env += 'export GIT_COMMITER_NAME="%s" ;' % user + env += 'export GIT_COMMITTER_NAME="%s" ;' % user env += 'export GIT_AUTHOR_EMAIL= ;' - env += 'export GIT_COMMITER_EMAIL= ;' + env += 'export GIT_COMMITTER_EMAIL= ;' env += 'export GIT_AUTHOR_DATE="%s" ;' % date env += 'export GIT_COMMITTER_DATE="%s" ;' % date diff --git a/contrib/hooks/post-receive-email b/contrib/hooks/post-receive-email index 58a35c8287..21989fc6ab 100755 --- a/contrib/hooks/post-receive-email +++ b/contrib/hooks/post-receive-email @@ -23,6 +23,13 @@ # possible for the email to be from someone other than the person doing the # push. # +# To help with debugging and use on pre-v1.5.1 git servers, this script will +# also obey the interface of hooks/update, taking its arguments on the +# command line. Unfortunately, hooks/update is called once for each ref. +# To avoid firing one email per ref, this script just prints its output to +# the screen when used in this mode. The output can then be redirected if +# wanted. +# # Config # ------ # hooks.mailinglist @@ -48,6 +55,11 @@ # "t=%s; printf 'http://.../?id=%%s' \$t; echo;echo; git show -C \$t; echo" # Be careful if "..." contains things that will be expanded by shell "eval" # or printf. +# hooks.emailmaxlines +# The maximum number of lines that should be included in the generated +# email body. If not specified, there is no limit. +# Lines beyond the limit are suppressed and counted, and a final +# line is added indicating the number of suppressed lines. # # Notes # ----- @@ -59,24 +71,16 @@ # ---------------------------- Functions # -# Top level email generation function. This decides what type of update -# this is and calls the appropriate body-generation routine after outputting -# the common header -# -# Note this function doesn't actually generate any email output, that is -# taken care of by the functions it calls: -# - generate_email_header -# - generate_create_XXXX_email -# - generate_update_XXXX_email -# - generate_delete_XXXX_email -# - generate_email_footer +# Function to prepare for email generation. This decides what type +# of update this is and whether an email should even be generated. # -generate_email() +prep_for_email() { # --- Arguments oldrev=$(git rev-parse $1) newrev=$(git rev-parse $2) refname="$3" + maxlines=$4 # --- Interpret # 0000->1234 (create) @@ -140,13 +144,13 @@ generate_email() short_refname=${refname##refs/remotes/} echo >&2 "*** Push-update of tracking branch, $refname" echo >&2 "*** - no email generated." - exit 0 + return 1 ;; *) # Anything else (is there anything else?) echo >&2 "*** Unknown type of update to $refname ($rev_type)" echo >&2 "*** - no email generated" - exit 1 + return 1 ;; esac @@ -162,9 +166,32 @@ generate_email() esac echo >&2 "*** $config_name is not set so no email will be sent" echo >&2 "*** for $refname update $oldrev->$newrev" - exit 0 + return 1 fi + return 0 +} + +# +# Top level email generation function. This calls the appropriate +# body-generation routine after outputting the common header. +# +# Note this function doesn't actually generate any email output, that is +# taken care of by the functions it calls: +# - generate_email_header +# - generate_create_XXXX_email +# - generate_update_XXXX_email +# - generate_delete_XXXX_email +# - generate_email_footer +# +# Note also that this function cannot 'exit' from the script; when this +# function is running (in hook script mode), the send_mail() function +# is already executing in another process, connected via a pipe, and +# if this function exits without, whatever has been generated to that +# point will be sent as an email... even if nothing has been generated. +# +generate_email() +{ # Email parameters # The email subject will contain the best description of the ref # that we can build from the parameters @@ -185,7 +212,12 @@ generate_email() fn_name=atag ;; esac - generate_${change_type}_${fn_name}_email + + if [ -z "$maxlines" ]; then + generate_${change_type}_${fn_name}_email + else + generate_${change_type}_${fn_name}_email | limit_lines $maxlines + fi generate_email_footer } @@ -196,7 +228,7 @@ generate_email_header() # Generate header cat <<-EOF To: $recipients - Subject: ${emailprefix}$projectdesc $refname_type, $short_refname, ${change_type}d. $describe + Subject: ${emailprefix}$projectdesc $refname_type $short_refname ${change_type}d. $describe X-Git-Refname: $refname X-Git-Reftype: $refname_type X-Git-Oldrev: $oldrev @@ -635,6 +667,24 @@ show_new_revisions() } +limit_lines() +{ + lines=0 + skipped=0 + while IFS="" read -r line; do + lines=$((lines + 1)) + if [ $lines -gt $1 ]; then + skipped=$((skipped + 1)) + else + printf "%s\n" "$line" + fi + done + if [ $skipped -ne 0 ]; then + echo "... $skipped lines suppressed ..." + fi +} + + send_mail() { if [ -n "$envelopesender" ]; then @@ -659,7 +709,7 @@ if [ -z "$GIT_DIR" ]; then exit 1 fi -projectdesc=$(sed -ne '1p' "$GIT_DIR/description") +projectdesc=$(sed -ne '1p' "$GIT_DIR/description" 2>/dev/null) # Check if the description is unchanged from it's default, and shorten it to # a more manageable length if it is if expr "$projectdesc" : "Unnamed repository.*$" >/dev/null @@ -672,6 +722,7 @@ announcerecipients=$(git config hooks.announcelist) envelopesender=$(git config hooks.envelopesender) emailprefix=$(git config hooks.emailprefix || echo '[SCM] ') custom_showrev=$(git config hooks.showrev) +maxlines=$(git config hooks.emailmaxlines) # --- Main loop # Allow dual mode: run from the command line just like the update hook, or @@ -680,10 +731,11 @@ if [ -n "$1" -a -n "$2" -a -n "$3" ]; then # Output to the terminal in command line mode - if someone wanted to # resend an email; they could redirect the output to sendmail # themselves - PAGER= generate_email $2 $3 $1 + prep_for_email $2 $3 $1 && PAGER= generate_email else while read oldrev newrev refname do - generate_email $oldrev $newrev $refname | send_mail + prep_for_email $oldrev $newrev $refname || continue + generate_email $maxlines | send_mail done fi diff --git a/contrib/p4import/git-p4import.py b/contrib/p4import/git-p4import.py index 0f3d97b67e..b6e534b65b 100644 --- a/contrib/p4import/git-p4import.py +++ b/contrib/p4import/git-p4import.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python # # This tool is copyright (c) 2006, Sean Estabrooks. # It is released under the Gnu Public License, version 2. diff --git a/contrib/svn-fe/.gitignore b/contrib/svn-fe/.gitignore new file mode 100644 index 0000000000..02a7791585 --- /dev/null +++ b/contrib/svn-fe/.gitignore @@ -0,0 +1,4 @@ +/*.xml +/*.1 +/*.html +/svn-fe diff --git a/contrib/svn-fe/Makefile b/contrib/svn-fe/Makefile new file mode 100644 index 0000000000..360d8da417 --- /dev/null +++ b/contrib/svn-fe/Makefile @@ -0,0 +1,63 @@ +all:: svn-fe$X + +CC = gcc +RM = rm -f +MV = mv + +CFLAGS = -g -O2 -Wall +LDFLAGS = +ALL_CFLAGS = $(CFLAGS) +ALL_LDFLAGS = $(LDFLAGS) +EXTLIBS = + +GIT_LIB = ../../libgit.a +VCSSVN_LIB = ../../vcs-svn/lib.a +LIBS = $(VCSSVN_LIB) $(GIT_LIB) $(EXTLIBS) + +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifndef V + QUIET_CC = @echo ' ' CC $@; + QUIET_LINK = @echo ' ' LINK $@; + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir +endif +endif + +svn-fe$X: svn-fe.o $(VCSSVN_LIB) $(GIT_LIB) + $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ svn-fe.o \ + $(ALL_LDFLAGS) $(LIBS) + +svn-fe.o: svn-fe.c ../../vcs-svn/svndump.h + $(QUIET_CC)$(CC) -I../../vcs-svn -o $*.o -c $(ALL_CFLAGS) $< + +svn-fe.html: svn-fe.txt + $(QUIET_SUBDIR0)../../Documentation $(QUIET_SUBDIR1) \ + MAN_TXT=../contrib/svn-fe/svn-fe.txt \ + ../contrib/svn-fe/$@ + +svn-fe.1: svn-fe.txt + $(QUIET_SUBDIR0)../../Documentation $(QUIET_SUBDIR1) \ + MAN_TXT=../contrib/svn-fe/svn-fe.txt \ + ../contrib/svn-fe/$@ + $(MV) ../../Documentation/svn-fe.1 . + +../../vcs-svn/lib.a: FORCE + $(QUIET_SUBDIR0)../.. $(QUIET_SUBDIR1) vcs-svn/lib.a + +../../libgit.a: FORCE + $(QUIET_SUBDIR0)../.. $(QUIET_SUBDIR1) libgit.a + +clean: + $(RM) svn-fe$X svn-fe.o svn-fe.html svn-fe.xml svn-fe.1 + +.PHONY: all clean FORCE diff --git a/contrib/svn-fe/svn-fe.c b/contrib/svn-fe/svn-fe.c new file mode 100644 index 0000000000..35db24f5ea --- /dev/null +++ b/contrib/svn-fe/svn-fe.c @@ -0,0 +1,17 @@ +/* + * This file is in the public domain. + * You may freely use, modify, distribute, and relicense it. + */ + +#include <stdlib.h> +#include "svndump.h" + +int main(int argc, char **argv) +{ + if (svndump_init(NULL)) + return 1; + svndump_read((argc > 1) ? argv[1] : NULL); + svndump_deinit(); + svndump_reset(); + return 0; +} diff --git a/contrib/svn-fe/svn-fe.txt b/contrib/svn-fe/svn-fe.txt new file mode 100644 index 0000000000..cd075b96c5 --- /dev/null +++ b/contrib/svn-fe/svn-fe.txt @@ -0,0 +1,70 @@ +svn-fe(1) +========= + +NAME +---- +svn-fe - convert an SVN "dumpfile" to a fast-import stream + +SYNOPSIS +-------- +svnadmin dump --incremental REPO | svn-fe [url] | git fast-import + +DESCRIPTION +----------- + +Converts a Subversion dumpfile into input suitable for +git-fast-import(1) and similar importers. REPO is a path to a +Subversion repository mirrored on the local disk. Remote Subversion +repositories can be mirrored on local disk using the `svnsync` +command. + +Note: this tool is very young. The details of its commandline +interface may change in backward incompatible ways. + +INPUT FORMAT +------------ +Subversion's repository dump format is documented in full in +`notes/dump-load-format.txt` from the Subversion source tree. +Files in this format can be generated using the 'svnadmin dump' or +'svk admin dump' command. + +Dumps produced with 'svnadmin dump --deltas' (dumpfile format v3) +are not supported. + +OUTPUT FORMAT +------------- +The fast-import format is documented by the git-fast-import(1) +manual page. + +NOTES +----- +Subversion dumps do not record a separate author and committer for +each revision, nor a separate display name and email address for +each author. Like git-svn(1), 'svn-fe' will use the name + +--------- +user <user@UUID> +--------- + +as committer, where 'user' is the value of the `svn:author` property +and 'UUID' the repository's identifier. + +To support incremental imports, 'svn-fe' puts a `git-svn-id` line at +the end of each commit log message if passed an url on the command +line. This line has the form `git-svn-id: URL@REVNO UUID`. + +The resulting repository will generally require further processing +to put each project in its own repository and to separate the history +of each branch. The 'git filter-branch --subdirectory-filter' command +may be useful for this purpose. + +BUGS +---- +Empty directories and unknown properties are silently discarded. + +The exit status does not reflect whether an error was detected. + +SEE ALSO +-------- +git-svn(1), svn2git(1), svk(1), git-filter-branch(1), git-fast-import(1), +https://svn.apache.org/repos/asf/subversion/trunk/notes/dump-load-format.txt diff --git a/contrib/thunderbird-patch-inline/appp.sh b/contrib/thunderbird-patch-inline/appp.sh index cc518f3c89..5eb4a51643 100755 --- a/contrib/thunderbird-patch-inline/appp.sh +++ b/contrib/thunderbird-patch-inline/appp.sh @@ -1,8 +1,8 @@ -#!/bin/bash +#!/bin/sh # Copyright 2008 Lukas Sandström <luksan@gmail.com> # # AppendPatch - A script to be used together with ExternalEditor -# for Mozilla Thunderbird to properly include pathes inline i e-mails. +# for Mozilla Thunderbird to properly include patches inline in e-mails. # ExternalEditor can be downloaded at http://globs.org/articles.php?lng=en&pg=2 diff --git a/contrib/workdir/git-new-workdir b/contrib/workdir/git-new-workdir index 993cacf324..75e8b25817 100755 --- a/contrib/workdir/git-new-workdir +++ b/contrib/workdir/git-new-workdir @@ -42,7 +42,7 @@ then fi # don't link to a workdir -if test -L "$git_dir/config" +if test -h "$git_dir/config" then die "\"$orig_git\" is a working directory only, please specify" \ "a complete repository." @@ -54,13 +54,13 @@ then die "destination directory '$new_workdir' already exists." fi -# make sure the the links use full paths +# make sure the links use full paths git_dir=$(cd "$git_dir"; pwd) # create the workdir mkdir -p "$new_workdir/.git" || die "unable to create \"$new_workdir\"!" -# create the links to the original repo. explictly exclude index, HEAD and +# create the links to the original repo. explicitly exclude index, HEAD and # logs/HEAD from the list since they are purely related to the current working # directory, and should not be shared. for x in config refs logs/refs objects info hooks packed-refs remotes rr-cache svn |