summaryrefslogtreecommitdiff
path: root/contrib/hooks/multimail/doc
diff options
context:
space:
mode:
Diffstat (limited to 'contrib/hooks/multimail/doc')
-rw-r--r--contrib/hooks/multimail/doc/gerrit.rst56
-rw-r--r--contrib/hooks/multimail/doc/gitolite.rst109
2 files changed, 165 insertions, 0 deletions
diff --git a/contrib/hooks/multimail/doc/gerrit.rst b/contrib/hooks/multimail/doc/gerrit.rst
new file mode 100644
index 0000000000..8011d05dec
--- /dev/null
+++ b/contrib/hooks/multimail/doc/gerrit.rst
@@ -0,0 +1,56 @@
+Setting up git-multimail on Gerrit
+==================================
+
+Gerrit has its own email-sending system, but you may prefer using
+``git-multimail`` instead. It supports Gerrit natively as a Gerrit
+``ref-updated`` hook (Warning: `Gerrit hooks
+<https://gerrit-review.googlesource.com/Documentation/config-hooks.html>`__
+are distinct from Git hooks). Setting up ``git-multimail`` on a Gerrit
+installation can be done following the instructions below.
+
+The explanations show an easy way to set up ``git-multimail``,
+but leave ``git-multimail`` installed and unconfigured for a while. If
+you run Gerrit on a production server, it is advised that you
+execute the step "Set up the hook" last to avoid confusing your users
+in the meantime.
+
+Set up the hook
+---------------
+
+Create a directory ``$site_path/hooks/`` if it does not exist (if you
+don't know what ``$site_path`` is, run ``gerrit.sh status`` and look
+for a ``GERRIT_SITE`` line). Either copy ``git_multimail.py`` to
+``$site_path/hooks/ref-updated`` or create a wrapper script like
+this::
+
+ #! /bin/sh
+ exec /path/to/git_multimail.py "$@"
+
+In both cases, make sure the file is named exactly
+``$site_path/hooks/ref-updated`` and is executable.
+
+(Alternatively, you may configure the ``[hooks]`` section of
+gerrit.config)
+
+Configuration
+-------------
+
+Log on the gerrit server and edit ``$site_path/git/$project/config``
+to configure ``git-multimail``.
+
+Troubleshooting
+---------------
+
+Warning: this will disable ``git-multimail`` during the debug, and
+could confuse your users. Don't run on a production server.
+
+To debug configuration issues with ``git-multimail``, you can add the
+``--stdout`` option when calling ``git_multimail.py`` like this::
+
+ #!/bin/sh
+ exec /path/to/git-multimail/git-multimail/git_multimail.py \
+ --stdout "$@" >> /tmp/log.txt
+
+and try pushing from a test repository. You should see the source of
+the email that would have been sent in the output of ``git push`` in
+the file ``/tmp/log.txt``.
diff --git a/contrib/hooks/multimail/doc/gitolite.rst b/contrib/hooks/multimail/doc/gitolite.rst
new file mode 100644
index 0000000000..00aedd9c57
--- /dev/null
+++ b/contrib/hooks/multimail/doc/gitolite.rst
@@ -0,0 +1,109 @@
+Setting up git-multimail on gitolite
+====================================
+
+``git-multimail`` supports gitolite 3 natively.
+The explanations below show an easy way to set up ``git-multimail``,
+but leave ``git-multimail`` installed and unconfigured for a while. If
+you run gitolite on a production server, it is advised that you
+execute the step "Set up the hook" last to avoid confusing your users
+in the meantime.
+
+Set up the hook
+---------------
+
+Log in as your gitolite user.
+
+Create a file ``.gitolite/hooks/common/post-receive`` on your gitolite
+account containing (adapt the path, obviously)::
+
+ #!/bin/sh
+ exec /path/to/git-multimail/git-multimail/git_multimail.py "$@"
+
+Make sure it's executable (``chmod +x``). Record the hook in
+gitolite::
+
+ gitolite setup
+
+Configuration
+-------------
+
+First, you have to allow the admin to set Git configuration variables.
+
+As gitolite user, edit the line containing ``GIT_CONFIG_KEYS`` in file
+``.gitolite.rc``, to make it look like::
+
+ GIT_CONFIG_KEYS => 'multimailhook\..*',
+
+You can now log out and return to your normal user.
+
+In the ``gitolite-admin`` clone, edit the file ``conf/gitolite.conf``
+and add::
+
+ repo @all
+ # Not strictly needed as git_multimail.py will chose gitolite if
+ # $GL_USER is set.
+ config multimailhook.environment = gitolite
+ config multimailhook.mailingList = # Where emails should be sent
+ config multimailhook.from = # From address to use
+
+Obviously, you can customize all parameters on a per-repository basis by
+adding these ``config multimailhook.*`` lines in the section
+corresponding to a repository or set of repositories.
+
+To activate ``git-multimail`` on a per-repository basis, do not set
+``multimailhook.mailingList`` in the ``@all`` section and set it only
+for repositories for which you want ``git-multimail``.
+
+Alternatively, you can set up the ``From:`` field on a per-user basis
+by adding a ``BEGIN USER EMAILS``/``END USER EMAILS`` section (see
+``../README``).
+
+Specificities of Gitolite for Configuration
+-------------------------------------------
+
+Empty configuration variables
+.............................
+
+With gitolite, the syntax ``config multimailhook.commitList = ""``
+unsets the variable instead of setting it to an empty string (see
+`here
+<http://gitolite.com/gitolite/git-config.html#an-important-warning-about-deleting-a-config-line>`__).
+As a result, there is no way to set a variable to the empty string.
+In all most places where an empty value is required, git-multimail
+now allows to specify special ``"none"`` value (case-sensitive) to
+mean the same.
+
+Alternatively, one can use ``" "`` (a single space) instead of ``""``.
+In most cases (in particular ``multimailhook.*List`` variables), this
+will be equivalent to an empty string.
+
+If you have a use-case where ``"none"`` is not an acceptable value and
+you need ``" "`` or ``""`` instead, please report it as a bug to
+git-multimail.
+
+Allowing Regular Expressions in Configuration
+.............................................
+
+gitolite has a mechanism to prevent unsafe configuration variable
+values, which prevent characters like ``|`` commonly used in regular
+expressions. If you do not need the safety feature of gitolite and
+need to use regular expressions in your configuration (e.g. for
+``multimailhook.refFilter*`` variables), set
+`UNSAFE_PATT
+<http://gitolite.com/gitolite/git-config.html#unsafe-patt>`__ to a
+less restrictive value.
+
+Troubleshooting
+---------------
+
+Warning: this will disable ``git-multimail`` during the debug, and
+could confuse your users. Don't run on a production server.
+
+To debug configuration issues with ``git-multimail``, you can add the
+``--stdout`` option when calling ``git_multimail.py`` like this::
+
+ #!/bin/sh
+ exec /path/to/git-multimail/git-multimail/git_multimail.py --stdout "$@"
+
+and try pushing from a test repository. You should see the source of
+the email that would have been sent in the output of ``git push``.