diff options
Diffstat (limited to 'contrib/fast-import')
| -rwxr-xr-x | contrib/fast-import/git-p4 | 271 | ||||
| -rwxr-xr-x | contrib/fast-import/import-directories.perl | 417 | ||||
| -rwxr-xr-x | contrib/fast-import/import-tars.perl | 84 | ||||
| -rwxr-xr-x | contrib/fast-import/import-zips.py | 2 |
4 files changed, 659 insertions, 115 deletions
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4 index 2b122d3f51..04ce7e3b02 100755 --- a/contrib/fast-import/git-p4 +++ b/contrib/fast-import/git-p4 @@ -8,12 +8,10 @@ # License: MIT <http://www.opensource.org/licenses/mit-license.php> # -import optparse, sys, os, marshal, popen2, subprocess, shelve -import tempfile, getopt, sha, os.path, time, platform +import optparse, sys, os, marshal, subprocess, shelve +import tempfile, getopt, os.path, time, platform import re -from sets import Set; - verbose = False @@ -201,7 +199,7 @@ def isModeExec(mode): def isModeExecChanged(src_mode, dst_mode): return isModeExec(src_mode) != isModeExec(dst_mode) -def p4CmdList(cmd, stdin=None, stdin_mode='w+b'): +def p4CmdList(cmd, stdin=None, stdin_mode='w+b', cb=None): cmd = p4_build_cmd("-G %s" % (cmd)) if verbose: sys.stderr.write("Opening pipe: %s\n" % cmd) @@ -224,7 +222,10 @@ def p4CmdList(cmd, stdin=None, stdin_mode='w+b'): try: while True: entry = marshal.load(p4.stdout) - result.append(entry) + if cb is not None: + cb(entry) + else: + result.append(entry) except EOFError: pass exitCode = p4.wait() @@ -245,7 +246,22 @@ def p4Cmd(cmd): def p4Where(depotPath): if not depotPath.endswith("/"): depotPath += "/" - output = p4Cmd("where %s..." % depotPath) + depotPath = depotPath + "..." + outputList = p4CmdList("where %s" % depotPath) + output = None + for entry in outputList: + if "depotFile" in entry: + if entry["depotFile"] == depotPath: + output = entry + break + elif "data" in entry: + data = entry.get("data") + space = data.find(" ") + if data[:space] == depotPath: + output = entry + break + if output == None: + return "" if output["code"] == "error": return "" clientPath = "" @@ -316,8 +332,11 @@ def gitBranchExists(branch): stderr=subprocess.PIPE, stdout=subprocess.PIPE); return proc.wait() == 0; +_gitConfig = {} def gitConfig(key): - return read_pipe("git config %s" % key, ignore_error=True).strip() + if not _gitConfig.has_key(key): + _gitConfig[key] = read_pipe("git config %s" % key, ignore_error=True).strip() + return _gitConfig[key] def p4BranchesInGit(branchesAreInRemotes = True): branches = {} @@ -424,13 +443,14 @@ def p4ChangesForPaths(depotPaths, changeRange): output = p4_read_pipe_lines("changes " + ' '.join (["%s...%s" % (p, changeRange) for p in depotPaths])) - changes = [] + changes = {} for line in output: - changeNum = line.split(" ")[1] - changes.append(int(changeNum)) + changeNum = int(line.split(" ")[1]) + changes[changeNum] = True - changes.sort() - return changes + changelist = changes.keys() + changelist.sort() + return changelist class Command: def __init__(self): @@ -686,7 +706,9 @@ class P4Submit(Command): submitTemplate = self.prepareLogMessage(template, logMessage) if os.environ.has_key("P4DIFF"): del(os.environ["P4DIFF"]) - diff = p4_read_pipe("diff -du ...") + diff = "" + for editedFile in editedFiles: + diff += p4_read_pipe("diff -du %r" % editedFile) newdiff = "" for newFile in filesToAdd: @@ -708,23 +730,35 @@ class P4Submit(Command): newdiff = newdiff.replace("\n", "\r\n") tmpFile.write(submitTemplate + separatorLine + diff + newdiff) tmpFile.close() - defaultEditor = "vi" - if platform.system() == "Windows": - defaultEditor = "notepad" + mtime = os.stat(fileName).st_mtime if os.environ.has_key("P4EDITOR"): editor = os.environ.get("P4EDITOR") else: - editor = os.environ.get("EDITOR", defaultEditor); + editor = read_pipe("git var GIT_EDITOR").strip() system(editor + " " + fileName) - tmpFile = open(fileName, "rb") - message = tmpFile.read() - tmpFile.close() - os.remove(fileName) - submitTemplate = message[:message.index(separatorLine)] - if self.isWindows: - submitTemplate = submitTemplate.replace("\r\n", "\n") - p4_write_pipe("submit -i", submitTemplate) + response = "y" + if os.stat(fileName).st_mtime <= mtime: + response = "x" + while response != "y" and response != "n": + response = raw_input("Submit template unchanged. Submit anyway? [y]es, [n]o (skip this patch) ") + + if response == "y": + tmpFile = open(fileName, "rb") + message = tmpFile.read() + tmpFile.close() + submitTemplate = message[:message.index(separatorLine)] + if self.isWindows: + submitTemplate = submitTemplate.replace("\r\n", "\n") + p4_write_pipe("submit -i", submitTemplate) + else: + for f in editedFiles: + p4_system("revert \"%s\"" % f); + for f in filesToAdd: + p4_system("revert \"%s\"" % f); + system("rm %s" %f) + + os.remove(fileName) else: fileName = "submit.txt" file = open(fileName, "w+") @@ -770,7 +804,7 @@ class P4Submit(Command): self.oldWorkingDirectory = os.getcwd() chdir(self.clientPath) - print "Syncronizing p4 checkout..." + print "Synchronizing p4 checkout..." p4_system("sync ...") self.check() @@ -827,8 +861,8 @@ class P4Sync(Command): self.usage += " //depot/path[@revRange]" self.silent = False - self.createdBranches = Set() - self.committedChanges = Set() + self.createdBranches = set() + self.committedChanges = set() self.branch = "" self.detectBranches = False self.detectLabels = False @@ -916,10 +950,83 @@ class P4Sync(Command): return branches - ## Should move this out, doesn't use SELF. - def readP4Files(self, files): + # output one file from the P4 stream + # - helper for streamP4Files + + def streamOneP4File(self, file, contents): + if file["type"] == "apple": + print "\nfile %s is a strange apple file that forks. Ignoring" % \ + file['depotFile'] + return + + relPath = self.stripRepoPath(file['depotFile'], self.branchPrefixes) + if verbose: + sys.stderr.write("%s\n" % relPath) + + mode = "644" + if isP4Exec(file["type"]): + mode = "755" + elif file["type"] == "symlink": + mode = "120000" + # p4 print on a symlink contains "target\n", so strip it off + data = ''.join(contents) + contents = [data[:-1]] + + if self.isWindows and file["type"].endswith("text"): + mangled = [] + for data in contents: + data = data.replace("\r\n", "\n") + mangled.append(data) + contents = mangled + + if file['type'] in ('text+ko', 'unicode+ko', 'binary+ko'): + contents = map(lambda text: re.sub(r'(?i)\$(Id|Header):[^$]*\$',r'$\1$', text), contents) + elif file['type'] in ('text+k', 'ktext', 'kxtext', 'unicode+k', 'binary+k'): + contents = map(lambda text: re.sub(r'\$(Id|Header|Author|Date|DateTime|Change|File|Revision):[^$\n]*\$',r'$\1$', text), contents) + + self.gitStream.write("M %s inline %s\n" % (mode, relPath)) + + # total length... + length = 0 + for d in contents: + length = length + len(d) + + self.gitStream.write("data %d\n" % length) + for d in contents: + self.gitStream.write(d) + self.gitStream.write("\n") + + def streamOneP4Deletion(self, file): + relPath = self.stripRepoPath(file['path'], self.branchPrefixes) + if verbose: + sys.stderr.write("delete %s\n" % relPath) + self.gitStream.write("D %s\n" % relPath) + + # handle another chunk of streaming data + def streamP4FilesCb(self, marshalled): + + if marshalled.has_key('depotFile') and self.stream_have_file_info: + # start of a new file - output the old one first + self.streamOneP4File(self.stream_file, self.stream_contents) + self.stream_file = {} + self.stream_contents = [] + self.stream_have_file_info = False + + # pick up the new file information... for the + # 'data' field we need to append to our array + for k in marshalled.keys(): + if k == 'data': + self.stream_contents.append(marshalled['data']) + else: + self.stream_file[k] = marshalled[k] + + self.stream_have_file_info = True + + # Stream directly from "p4 files" into "git fast-import" + def streamP4Files(self, files): filesForCommit = [] filesToRead = [] + filesToDelete = [] for f in files: includeFile = True @@ -931,52 +1038,37 @@ class P4Sync(Command): if includeFile: filesForCommit.append(f) - if f['action'] != 'delete': + if f['action'] not in ('delete', 'move/delete', 'purge'): filesToRead.append(f) + else: + filesToDelete.append(f) - filedata = [] - if len(filesToRead) > 0: - filedata = p4CmdList('-x - print', - stdin='\n'.join(['%s#%s' % (f['path'], f['rev']) - for f in filesToRead]), - stdin_mode='w+') - - if "p4ExitCode" in filedata[0]: - die("Problems executing p4. Error: [%d]." - % (filedata[0]['p4ExitCode'])); - - j = 0; - contents = {} - while j < len(filedata): - stat = filedata[j] - j += 1 - text = []; - while j < len(filedata) and filedata[j]['code'] in ('text', 'unicode', 'binary'): - text.append(filedata[j]['data']) - j += 1 - text = ''.join(text) - - if not stat.has_key('depotFile'): - sys.stderr.write("p4 print fails with: %s\n" % repr(stat)) - continue + # deleted files... + for f in filesToDelete: + self.streamOneP4Deletion(f) - if stat['type'] in ('text+ko', 'unicode+ko', 'binary+ko'): - text = re.sub(r'(?i)\$(Id|Header):[^$]*\$',r'$\1$', text) - elif stat['type'] in ('text+k', 'ktext', 'kxtext', 'unicode+k', 'binary+k'): - text = re.sub(r'\$(Id|Header|Author|Date|DateTime|Change|File|Revision):[^$\n]*\$',r'$\1$', text) + if len(filesToRead) > 0: + self.stream_file = {} + self.stream_contents = [] + self.stream_have_file_info = False - contents[stat['depotFile']] = text + # curry self argument + def streamP4FilesCbSelf(entry): + self.streamP4FilesCb(entry) - for f in filesForCommit: - path = f['path'] - if contents.has_key(path): - f['data'] = contents[path] + p4CmdList("-x - print", + '\n'.join(['%s#%s' % (f['path'], f['rev']) + for f in filesToRead]), + cb=streamP4FilesCbSelf) - return filesForCommit + # do the last chunk + if self.stream_file.has_key('depotFile'): + self.streamOneP4File(self.stream_file, self.stream_contents) def commit(self, details, files, branch, branchPrefixes, parent = ""): epoch = details["time"] author = details["user"] + self.branchPrefixes = branchPrefixes if self.verbose: print "commit into %s" % branch @@ -989,7 +1081,6 @@ class P4Sync(Command): new_files.append (f) else: sys.stderr.write("Ignoring file outside of prefix: %s\n" % path) - files = self.readP4Files(new_files) self.gitStream.write("commit %s\n" % branch) # gitStream.write("mark :%s\n" % details["change"]) @@ -1017,33 +1108,7 @@ class P4Sync(Command): print "parent %s" % parent self.gitStream.write("from %s\n" % parent) - for file in files: - if file["type"] == "apple": - print "\nfile %s is a strange apple file that forks. Ignoring!" % file['path'] - continue - - relPath = self.stripRepoPath(file['path'], branchPrefixes) - if file["action"] == "delete": - self.gitStream.write("D %s\n" % relPath) - else: - data = file['data'] - - mode = "644" - if isP4Exec(file["type"]): - mode = "755" - elif file["type"] == "symlink": - mode = "120000" - # p4 print on a symlink contains "target\n", so strip it off - data = data[:-1] - - if self.isWindows and file["type"].endswith("text"): - data = data.replace("\r\n", "\n") - - self.gitStream.write("M %s inline %s\n" % (mode, relPath)) - self.gitStream.write("data %s\n" % len(data)) - self.gitStream.write(data) - self.gitStream.write("\n") - + self.streamP4Files(new_files) self.gitStream.write("\n") change = int(details["change"]) @@ -1062,7 +1127,7 @@ class P4Sync(Command): cleanedFiles = {} for info in files: - if info["action"] == "delete": + if info["action"] in ("delete", "purge"): continue cleanedFiles[info["depotFile"]] = info["rev"] @@ -1108,7 +1173,7 @@ class P4Sync(Command): s = '' for (key, val) in self.users.items(): - s += "%s\t%s\n" % (key, val) + s += "%s\t%s\n" % (key.expandtabs(1), val.expandtabs(1)) open(self.getUserCacheFilename(), "wb").write(s) self.userMapFromPerforceServer = True @@ -1385,7 +1450,7 @@ class P4Sync(Command): if change > newestRevision: newestRevision = change - if info["action"] == "delete": + if info["action"] in ("delete", "purge"): # don't increase the file cnt, otherwise details["depotFile123"] will have gaps! #fileCnt = fileCnt + 1 continue @@ -1593,7 +1658,7 @@ class P4Sync(Command): if len(self.changesFile) > 0: output = open(self.changesFile).readlines() - changeSet = Set() + changeSet = set() for line in output: changeSet.add(int(line)) @@ -1733,8 +1798,12 @@ class P4Clone(P4Sync): if not P4Sync.run(self, depotPaths): return False if self.branch != "master": - if gitBranchExists("refs/remotes/p4/master"): - system("git branch master refs/remotes/p4/master") + if self.importIntoRemotes: + masterbranch = "refs/remotes/p4/master" + else: + masterbranch = "refs/heads/p4/master" + if gitBranchExists(masterbranch): + system("git branch master %s" % masterbranch) system("git checkout -f") else: print "Could not detect main branch. No checkout/master branch created." diff --git a/contrib/fast-import/import-directories.perl b/contrib/fast-import/import-directories.perl new file mode 100755 index 0000000000..7f3afa5ac4 --- /dev/null +++ b/contrib/fast-import/import-directories.perl @@ -0,0 +1,417 @@ +#!/usr/bin/perl +# +# Copyright 2008-2009 Peter Krefting <peter@softwolves.pp.se> +# +# ------------------------------------------------------------------------ +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# ------------------------------------------------------------------------ + +=pod + +=head1 NAME + +import-directories - Import bits and pieces to Git. + +=head1 SYNOPSIS + +B<import-directories.perl> F<configfile> F<outputfile> + +=head1 DESCRIPTION + +Script to import arbitrary projects version controlled by the "copy the +source directory to a new location and edit it there"-version controlled +projects into version control. Handles projects with arbitrary branching +and version trees, taking a file describing the inputs and generating a +file compatible with the L<git-fast-import(1)> format. + +=head1 CONFIGURATION FILE + +=head2 Format + +The configuration file is based on the standard I<.ini> format. + + ; Comments start with semi-colons + [section] + key=value + +Please see below for information on how to escape special characters. + +=head2 Global configuration + +Global configuration is done in the B<[config]> section, which should be +the first section in the file. Configuration can be changed by +repeating configuration sections later on. + + [config] + ; configure conversion of CRLFs. "convert" means that all CRLFs + ; should be converted into LFs (suitable for the core.autocrlf + ; setting set to true in Git). "none" means that all data is + ; treated as binary. + crlf=convert + +=head2 Revision configuration + +Each revision that is to be imported is described in three +sections. Revisions should be defined in topological order, so +that a revision's parent has always been defined when a new revision +is introduced. All the sections for one revision must be defined +before defining the next revision. + +Each revision is assigned a unique numerical identifier. The +numbers do not need to be consecutive, nor monotonically +increasing. + +For instance, if your configuration file contains only the two +revisions 4711 and 42, where 4711 is the initial commit, the +only requirement is that 4711 is completely defined before 42. + +=pod + +=head3 Revision description section + +A section whose section name is just an integer gives meta-data +about the revision. + + [3] + ; author sets the author of the revisions + author=Peter Krefting <peter@softwolves.pp.se> + ; branch sets the branch that the revision should be committed to + branch=master + ; parent describes the revision that is the parent of this commit + ; (optional) + parent=1 + ; merges describes a revision that is merged into this commit + ; (optional; can be repeated) + merges=2 + ; selects one file to take the timestamp from + ; (optional; if unspecified, the most recent file from the .files + ; section is used) + timestamp=3/source.c + +=head3 Revision contents section + +A section whose section name is an integer followed by B<.files> +describe all the files included in this revision. If a file that +was available previously is not included in this revision, it will +be removed. + +If an on-disk revision is incomplete, you can point to files from +a previous revision. There are no restriction as to where the source +files are located, nor to the names of them. + + [3.files] + ; the key is the path inside the repository, the value is the path + ; as seen from the importer script. + source.c=ver-3.00/source.c + source.h=ver-2.99/source.h + readme.txt=ver-3.00/introduction to the project.txt + +File names are treated as byte strings (but please see below on +quoting rules), and should be stored in the configuration file in +the encoding that should be used in the generated repository. + +=head3 Revision commit message section + +A section whose section name is an integer followed by B<.message> +gives the commit message. This section is read verbatim, up until +the beginning of the next section. As such, a commit message may not +contain a line that begins with an opening square bracket ("[") and +ends with a closing square bracket ("]"), unless they are surrounded +by whitespace or other characters. + + [3.message] + Implement foobar. + ; trailing blank lines are ignored. + +=cut + +# Globals +use strict; +use warnings; +use integer; +my $crlfmode = 0; +my @revs; +my (%revmap, %message, %files, %author, %branch, %parent, %merges, %time, %timesource); +my $sectiontype = 0; +my $rev = 0; +my $mark = 1; + +# Check command line +if ($#ARGV < 1 || $ARGV[0] =~ /^--?h/) +{ + exec('perldoc', $0); + exit 1; +} + +# Open configuration +my $config = $ARGV[0]; +open CFG, '<', $config or die "Cannot open configuration file \"$config\": "; + +# Open output +my $output = $ARGV[1]; +open OUT, '>', $output or die "Cannot create output file \"$output\": "; +binmode OUT; + +LINE: while (my $line = <CFG>) +{ + $line =~ s/\r?\n$//; + next LINE if $sectiontype != 4 && $line eq ''; + next LINE if $line =~ /^;/; + my $oldsectiontype = $sectiontype; + my $oldrev = $rev; + + # Sections + if ($line =~ m"^\[(config|(\d+)(|\.files|\.message))\]$") + { + if ($1 eq 'config') + { + $sectiontype = 1; + } + elsif ($3 eq '') + { + $sectiontype = 2; + $rev = $2; + # Create a new revision + die "Duplicate rev: $line\n " if defined $revmap{$rev}; + print "Reading revision $rev\n"; + push @revs, $rev; + $revmap{$rev} = $mark ++; + $time{$revmap{$rev}} = 0; + } + elsif ($3 eq '.files') + { + $sectiontype = 3; + $rev = $2; + die "Revision mismatch: $line\n " unless $rev == $oldrev; + } + elsif ($3 eq '.message') + { + $sectiontype = 4; + $rev = $2; + die "Revision mismatch: $line\n " unless $rev == $oldrev; + } + else + { + die "Internal parse error: $line\n "; + } + next LINE; + } + + # Parse data + if ($sectiontype != 4) + { + # Key and value + if ($line =~ m"^\s*([^\s].*=.*[^\s])\s*$") + { + my ($key, $value) = &parsekeyvaluepair($1); + # Global configuration + if (1 == $sectiontype) + { + if ($key eq 'crlf') + { + $crlfmode = 1, next LINE if $value eq 'convert'; + $crlfmode = 0, next LINE if $value eq 'none'; + } + die "Unknown configuration option: $line\n "; + } + # Revision specification + if (2 == $sectiontype) + { + my $current = $revmap{$rev}; + $author{$current} = $value, next LINE if $key eq 'author'; + $branch{$current} = $value, next LINE if $key eq 'branch'; + $parent{$current} = $value, next LINE if $key eq 'parent'; + $timesource{$current} = $value, next LINE if $key eq 'timestamp'; + push(@{$merges{$current}}, $value), next LINE if $key eq 'merges'; + die "Unknown revision option: $line\n "; + } + # Filespecs + if (3 == $sectiontype) + { + # Add the file and create a marker + die "File not found: $line\n " unless -f $value; + my $current = $revmap{$rev}; + ${$files{$current}}{$key} = $mark; + my $time = &fileblob($value, $crlfmode, $mark ++); + + # Update revision timestamp if more recent than other + # files seen, or if this is the file we have selected + # to take the time stamp from using the "timestamp" + # directive. + if ((defined $timesource{$current} && $timesource{$current} eq $value) + || $time > $time{$current}) + { + $time{$current} = $time; + } + } + } + else + { + die "Parse error: $line\n "; + } + } + else + { + # Commit message + my $current = $revmap{$rev}; + if (defined $message{$current}) + { + $message{$current} .= "\n"; + } + $message{$current} .= $line; + } +} +close CFG; + +# Start spewing out data for git-fast-import +foreach my $commit (@revs) +{ + # Progress + print OUT "progress Creating revision $commit\n"; + + # Create commit header + my $mark = $revmap{$commit}; + + # Branch and commit id + print OUT "commit refs/heads/", $branch{$mark}, "\nmark :", $mark, "\n"; + + # Author and timestamp + die "No timestamp defined for $commit (no files?)\n" unless defined $time{$mark}; + print OUT "committer ", $author{$mark}, " ", $time{$mark}, " +0100\n"; + + # Commit message + die "No message defined for $commit\n" unless defined $message{$mark}; + my $message = $message{$mark}; + $message =~ s/\n$//; # Kill trailing empty line + print OUT "data ", length($message), "\n", $message, "\n"; + + # Parent and any merges + print OUT "from :", $revmap{$parent{$mark}}, "\n" if defined $parent{$mark}; + if (defined $merges{$mark}) + { + foreach my $merge (@{$merges{$mark}}) + { + print OUT "merge :", $revmap{$merge}, "\n"; + } + } + + # Output file marks + print OUT "deleteall\n"; # start from scratch + foreach my $file (sort keys %{$files{$mark}}) + { + print OUT "M 644 :", ${$files{$mark}}{$file}, " $file\n"; + } + print OUT "\n"; +} + +# Create one file blob +sub fileblob +{ + my ($filename, $crlfmode, $mark) = @_; + + # Import the file + print OUT "progress Importing $filename\nblob\nmark :$mark\n"; + open FILE, '<', $filename or die "Cannot read $filename\n "; + binmode FILE; + my ($size, $mtime) = (stat(FILE))[7,9]; + my $file; + read FILE, $file, $size; + close FILE; + $file =~ s/\r\n/\n/g if $crlfmode; + print OUT "data ", length($file), "\n", $file, "\n"; + + return $mtime; +} + +# Parse a key=value pair +sub parsekeyvaluepair +{ +=pod + +=head2 Escaping special characters + +Key and value strings may be enclosed in quotes, in which case +whitespace inside the quotes is preserved. Additionally, an equal +sign may be included in the key by preceding it with a backslash. +For example: + + "key1 "=value1 + key2=" value2" + key\=3=value3 + key4=value=4 + "key5""=value5 + +Here the first key is "key1 " (note the trailing white-space) and the +second value is " value2" (note the leading white-space). The third +key contains an equal sign "key=3" and so does the fourth value, which +does not need to be escaped. The fifth key contains a trailing quote, +which does not need to be escaped since it is inside a surrounding +quote. + +=cut + my $pair = shift; + + # Separate key and value by the first non-quoted equal sign + my ($key, $value); + if ($pair =~ /^(.*[^\\])=(.*)$/) + { + ($key, $value) = ($1, $2) + } + else + { + die "Parse error: $pair\n "; + } + + # Unquote and unescape the key and value separately + return (&unescape($key), &unescape($value)); +} + +# Unquote and unescape +sub unescape +{ + my $string = shift; + + # First remove enclosing quotes. Backslash before the trailing + # quote leaves both. + if ($string =~ /^"(.*[^\\])"$/) + { + $string = $1; + } + + # Second remove any backslashes inside the unquoted string. + # For later: Handle special sequences like \t ? + $string =~ s/\\(.)/$1/g; + + return $string; +} + +__END__ + +=pod + +=head1 EXAMPLES + +B<import-directories.perl> F<project.import> + +=head1 AUTHOR + +Copyright 2008-2009 Peter Krefting E<lt>peter@softwolves.pp.se> + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation. + +=cut diff --git a/contrib/fast-import/import-tars.perl b/contrib/fast-import/import-tars.perl index 23aeb257b9..95438e1ed4 100755 --- a/contrib/fast-import/import-tars.perl +++ b/contrib/fast-import/import-tars.perl @@ -8,19 +8,35 @@ ## perl import-tars.perl *.tar.bz2 ## git whatchanged import-tars ## +## Use --metainfo to specify the extension for a meta data file, where +## import-tars can read the commit message and optionally author and +## committer information. +## +## echo 'This is the commit message' > myfile.tar.bz2.msg +## perl import-tars.perl --metainfo=msg myfile.tar.bz2 use strict; -die "usage: import-tars *.tar.{gz,bz2,Z}\n" unless @ARGV; +use Getopt::Long; + +my $metaext = ''; + +die "usage: import-tars [--metainfo=extension] *.tar.{gz,bz2,lzma,xz,Z}\n" + unless GetOptions('metainfo=s' => \$metaext) && @ARGV; my $branch_name = 'import-tars'; my $branch_ref = "refs/heads/$branch_name"; -my $committer_name = 'T Ar Creator'; -my $committer_email = 'tar@example.com'; +my $author_name = $ENV{'GIT_AUTHOR_NAME'} || 'T Ar Creator'; +my $author_email = $ENV{'GIT_AUTHOR_EMAIL'} || 'tar@example.com'; +my $committer_name = $ENV{'GIT_COMMITTER_NAME'} || `git config --get user.name`; +my $committer_email = $ENV{'GIT_COMMITTER_EMAIL'} || `git config --get user.email`; + +chomp($committer_name, $committer_email); open(FI, '|-', 'git', 'fast-import', '--quiet') or die "Unable to start git fast-import: $!\n"; foreach my $tar_file (@ARGV) { + my $commit_time = time; $tar_file =~ m,([^/]+)$,; my $tar_name = $1; @@ -33,13 +49,16 @@ foreach my $tar_file (@ARGV) } elsif ($tar_name =~ s/\.tar\.Z$//) { open(I, '-|', 'uncompress', '-c', $tar_file) or die "Unable to uncompress -c $tar_file: $!\n"; + } elsif ($tar_name =~ s/\.(tar\.(lzma|xz)|(tlz|txz))$//) { + open(I, '-|', 'xz', '-dc', $tar_file) + or die "Unable to xz -dc $tar_file: $!\n"; } elsif ($tar_name =~ s/\.tar$//) { open(I, $tar_file) or die "Unable to open $tar_file: $!\n"; } else { die "Unrecognized compression format: $tar_file\n"; } - my $commit_time = 0; + my $author_time = 0; my $next_mark = 1; my $have_top_dir = 1; my ($top_dir, %files); @@ -77,10 +96,16 @@ foreach my $tar_file (@ARGV) $mtime = oct $mtime; next if $typeflag == 5; # directory - print FI "blob\n", "mark :$next_mark\n", "data $size\n"; - while ($size > 0 && read(I, $_, 512) == 512) { - print FI substr($_, 0, $size); - $size -= 512; + print FI "blob\n", "mark :$next_mark\n"; + if ($typeflag == 2) { # symbolic link + print FI "data ", length($linkname), "\n", $linkname; + $mode = 0120000; + } else { + print FI "data $size\n"; + while ($size > 0 && read(I, $_, 512) == 512) { + print FI substr($_, 0, $size); + $size -= 512; + } } print FI "\n"; @@ -92,17 +117,49 @@ foreach my $tar_file (@ARGV) } $files{$path} = [$next_mark++, $mode]; - $commit_time = $mtime if $mtime > $commit_time; + $author_time = $mtime if $mtime > $author_time; $path =~ m,^([^/]+)/,; $top_dir = $1 unless $top_dir; $have_top_dir = 0 if $top_dir ne $1; } + my $commit_msg = "Imported from $tar_file."; + my $this_committer_name = $committer_name; + my $this_committer_email = $committer_email; + my $this_author_name = $author_name; + my $this_author_email = $author_email; + if ($metaext ne '') { + # Optionally read a commit message from <filename.tar>.msg + # Add a line on the form "Committer: name <e-mail>" to override + # the committer and "Author: name <e-mail>" to override the + # author for this tar ball. + if (open MSG, '<', "${tar_file}.${metaext}") { + my $header_done = 0; + $commit_msg = ''; + while (<MSG>) { + if (!$header_done && /^Committer:\s+([^<>]*)\s+<(.*)>\s*$/i) { + $this_committer_name = $1; + $this_committer_email = $2; + } elsif (!$header_done && /^Author:\s+([^<>]*)\s+<(.*)>\s*$/i) { + $this_author_name = $1; + $this_author_email = $2; + } elsif (!$header_done && /^$/) { # empty line ends header. + $header_done = 1; + } else { + $commit_msg .= $_; + $header_done = 1; + } + } + close MSG; + } + } + print FI <<EOF; commit $branch_ref -committer $committer_name <$committer_email> $commit_time +0000 +author $this_author_name <$this_author_email> $author_time +0000 +committer $this_committer_name <$this_committer_email> $commit_time +0000 data <<END_OF_COMMIT_MESSAGE -Imported from $tar_file. +$commit_msg END_OF_COMMIT_MESSAGE deleteall @@ -112,14 +169,15 @@ EOF { my ($mark, $mode) = @{$files{$path}}; $path =~ s,^([^/]+)/,, if $have_top_dir; - printf FI "M %o :%i %s\n", $mode & 0111 ? 0755 : 0644, $mark, $path; + $mode = $mode & 0111 ? 0755 : 0644 unless $mode == 0120000; + printf FI "M %o :%i %s\n", $mode, $mark, $path; } print FI "\n"; print FI <<EOF; tag $tar_name from $branch_ref -tagger $committer_name <$committer_email> $commit_time +0000 +tagger $author_name <$author_email> $author_time +0000 data <<END_OF_TAG_MESSAGE Package $tar_name END_OF_TAG_MESSAGE diff --git a/contrib/fast-import/import-zips.py b/contrib/fast-import/import-zips.py index 7051a83a59..82f5ed3ddc 100755 --- a/contrib/fast-import/import-zips.py +++ b/contrib/fast-import/import-zips.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python ## zip archive frontend for git-fast-import ## |