diff options
Diffstat (limited to 'contrib/completion')
| -rw-r--r-- | contrib/completion/git-completion.bash | 61 | ||||
| -rw-r--r-- | contrib/completion/git-prompt.sh | 59 |
2 files changed, 82 insertions, 38 deletions
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 377d6c5494..ba5c395d2d 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -49,6 +49,11 @@ # and git-switch completion (e.g., completing "foo" when "origin/foo" # exists). # +# GIT_COMPLETION_SHOW_ALL_COMMANDS +# +# When set to "1" suggest all commands, including plumbing commands +# which are hidden by default (e.g. "cat-file" on "git ca<TAB>"). +# # GIT_COMPLETION_SHOW_ALL # # When set to "1" suggest all options, including options which are @@ -2885,6 +2890,10 @@ _git_restore () --*) __gitcomp_builtin restore ;; + *) + if __git rev-parse --verify --quiet HEAD >/dev/null; then + __git_complete_index_file "--modified" + fi esac } @@ -2986,9 +2995,37 @@ _git_show_branch () __git_complete_revlist } +__gitcomp_directories () +{ + local _tmp_dir _tmp_completions _found=0 + + # Get the directory of the current token; this differs from dirname + # in that it keeps up to the final trailing slash. If no slash found + # that's fine too. + [[ "$cur" =~ .*/ ]] + _tmp_dir=$BASH_REMATCH + + # Find possible directory completions, adding trailing '/' characters, + # de-quoting, and handling unusual characters. + while IFS= read -r -d $'\0' c ; do + # If there are directory completions, find ones that start + # with "$cur", the current token, and put those in COMPREPLY + if [[ $c == "$cur"* ]]; then + COMPREPLY+=("$c/") + _found=1 + fi + done < <(git ls-tree -z -d --name-only HEAD $_tmp_dir) + + if [[ $_found == 0 ]] && [[ "$cur" =~ /$ ]]; then + # No possible further completions any deeper, so assume we're at + # a leaf directory and just consider it complete + __gitcomp_direct_append "$cur " + fi +} + _git_sparse_checkout () { - local subcommands="list init set disable" + local subcommands="list init set disable add reapply" local subcommand="$(__git_find_on_cmdline "$subcommands")" if [ -z "$subcommand" ]; then __gitcomp "$subcommands" @@ -2996,14 +3033,14 @@ _git_sparse_checkout () fi case "$subcommand,$cur" in - init,--*) - __gitcomp "--cone" - ;; - set,--*) - __gitcomp "--stdin" - ;; - *) + *,--*) + __gitcomp_builtin sparse-checkout_$subcommand "" "--" ;; + set,*|add,*) + if [ "$(__git config core.sparseCheckoutCone)" == "true" ] || + [ -n "$(__git_find_on_cmdline --cone)" ]; then + __gitcomp_directories + fi esac } @@ -3455,7 +3492,13 @@ __git_main () then __gitcomp "$GIT_TESTING_PORCELAIN_COMMAND_LIST" else - __gitcomp "$(__git --list-cmds=list-mainporcelain,others,nohelpers,alias,list-complete,config)" + local list_cmds=list-mainporcelain,others,nohelpers,alias,list-complete,config + + if test "${GIT_COMPLETION_SHOW_ALL_COMMANDS-}" = "1" + then + list_cmds=builtins,$list_cmds + fi + __gitcomp "$(__git --list-cmds=$list_cmds)" fi ;; esac diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh index db7c0068fb..87b2b916c0 100644 --- a/contrib/completion/git-prompt.sh +++ b/contrib/completion/git-prompt.sh @@ -66,6 +66,11 @@ # git always compare HEAD to @{upstream} # svn always compare HEAD to your SVN upstream # +# By default, __git_ps1 will compare HEAD to your SVN upstream if it can +# find one, or @{upstream} otherwise. Once you have set +# GIT_PS1_SHOWUPSTREAM, you can override it on a per-repository basis by +# setting the bash.showUpstream config variable. +# # You can change the separator between the branch name and the above # state symbols by setting GIT_PS1_STATESEPARATOR. The default separator # is SP. @@ -79,11 +84,6 @@ # single '?' character by setting GIT_PS1_COMPRESSSPARSESTATE, or omitted # by setting GIT_PS1_OMITSPARSESTATE. # -# By default, __git_ps1 will compare HEAD to your SVN upstream if it can -# find one, or @{upstream} otherwise. Once you have set -# GIT_PS1_SHOWUPSTREAM, you can override it on a per-repository basis by -# setting the bash.showUpstream config variable. -# # If you would like to see more information about the identity of # commits checked out as a detached HEAD, set GIT_PS1_DESCRIBE_STYLE # to one of these values: @@ -115,7 +115,7 @@ __git_ps1_show_upstream () { local key value local svn_remote svn_url_pattern count n - local upstream=git legacy="" verbose="" name="" + local upstream_type=git legacy="" verbose="" name="" svn_remote=() # get some config options from git-config @@ -132,7 +132,7 @@ __git_ps1_show_upstream () svn-remote.*.url) svn_remote[$((${#svn_remote[@]} + 1))]="$value" svn_url_pattern="$svn_url_pattern\\|$value" - upstream=svn+git # default upstream is SVN if available, else git + upstream_type=svn+git # default upstream type is SVN if available, else git ;; esac done <<< "$output" @@ -141,16 +141,16 @@ __git_ps1_show_upstream () local option for option in ${GIT_PS1_SHOWUPSTREAM}; do case "$option" in - git|svn) upstream="$option" ;; + git|svn) upstream_type="$option" ;; verbose) verbose=1 ;; legacy) legacy=1 ;; name) name=1 ;; esac done - # Find our upstream - case "$upstream" in - git) upstream="@{upstream}" ;; + # Find our upstream type + case "$upstream_type" in + git) upstream_type="@{upstream}" ;; svn*) # get the upstream from the "git-svn-id: ..." in a commit message # (git-svn uses essentially the same procedure internally) @@ -167,12 +167,12 @@ __git_ps1_show_upstream () if [[ -z "$svn_upstream" ]]; then # default branch name for checkouts with no layout: - upstream=${GIT_SVN_ID:-git-svn} + upstream_type=${GIT_SVN_ID:-git-svn} else - upstream=${svn_upstream#/} + upstream_type=${svn_upstream#/} fi - elif [[ "svn+git" = "$upstream" ]]; then - upstream="@{upstream}" + elif [[ "svn+git" = "$upstream_type" ]]; then + upstream_type="@{upstream}" fi ;; esac @@ -180,11 +180,11 @@ __git_ps1_show_upstream () # Find how many commits we are ahead/behind our upstream if [[ -z "$legacy" ]]; then count="$(git rev-list --count --left-right \ - "$upstream"...HEAD 2>/dev/null)" + "$upstream_type"...HEAD 2>/dev/null)" else # produce equivalent output to --count for older versions of git local commits - if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)" + if commits="$(git rev-list --left-right "$upstream_type"...HEAD 2>/dev/null)" then local commit behind=0 ahead=0 for commit in $commits @@ -214,26 +214,26 @@ __git_ps1_show_upstream () *) # diverged from upstream p="<>" ;; esac - else + else # verbose, set upstream instead of p case "$count" in "") # no upstream - p="" ;; + upstream="" ;; "0 0") # equal to upstream - p=" u=" ;; + upstream="|u=" ;; "0 "*) # ahead of upstream - p=" u+${count#0 }" ;; + upstream="|u+${count#0 }" ;; *" 0") # behind upstream - p=" u-${count% 0}" ;; + upstream="|u-${count% 0}" ;; *) # diverged from upstream - p=" u+${count#* }-${count% *}" ;; + upstream="|u+${count#* }-${count% *}" ;; esac if [[ -n "$count" && -n "$name" ]]; then __git_ps1_upstream_name=$(git rev-parse \ - --abbrev-ref "$upstream" 2>/dev/null) + --abbrev-ref "$upstream_type" 2>/dev/null) if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then - p="$p \${__git_ps1_upstream_name}" + upstream="$upstream \${__git_ps1_upstream_name}" else - p="$p ${__git_ps1_upstream_name}" + upstream="$upstream ${__git_ps1_upstream_name}" # not needed anymore; keep user's # environment clean unset __git_ps1_upstream_name @@ -512,7 +512,8 @@ __git_ps1 () local u="" local h="" local c="" - local p="" + local p="" # short version of upstream state indicator + local upstream="" # verbose version of upstream state indicator if [ "true" = "$inside_gitdir" ]; then if [ "true" = "$bare_repo" ]; then @@ -568,8 +569,8 @@ __git_ps1 () b="\${__git_ps1_branch_name}" fi - local f="$h$w$i$s$u" - local gitstring="$c$b${f:+$z$f}${sparse}$r$p" + local f="$h$w$i$s$u$p" + local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}" if [ $pcmode = yes ]; then if [ "${__git_printf_supports_v-}" != yes ]; then |