diff options
Diffstat (limited to 'contrib/completion')
| -rw-r--r-- | contrib/completion/git-completion.bash | 143 | ||||
| -rw-r--r-- | contrib/completion/git-completion.tcsh | 107 | ||||
| -rw-r--r-- | contrib/completion/git-completion.zsh | 78 | ||||
| -rw-r--r-- | contrib/completion/git-prompt.sh | 110 |
4 files changed, 370 insertions, 68 deletions
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index cda095de6b..0b77eb1fa4 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -23,10 +23,6 @@ # 3) Consider changing your PS1 to also show the current branch, # see git-prompt.sh for details. -if [[ -n ${ZSH_VERSION-} ]]; then - autoload -U +X bashcompinit && bashcompinit -fi - case "$COMP_WORDBREAKS" in *:*) : great ;; *) COMP_WORDBREAKS="$COMP_WORDBREAKS:" @@ -169,7 +165,6 @@ __git_reassemble_comp_words_by_ref() } if ! type _get_comp_words_by_ref >/dev/null 2>&1; then -if [[ -z ${ZSH_VERSION:+set} ]]; then _get_comp_words_by_ref () { local exclude cur_ words_ cword_ @@ -197,32 +192,6 @@ _get_comp_words_by_ref () shift done } -else -_get_comp_words_by_ref () -{ - while [ $# -gt 0 ]; do - case "$1" in - cur) - cur=${COMP_WORDS[COMP_CWORD]} - ;; - prev) - prev=${COMP_WORDS[COMP_CWORD-1]} - ;; - words) - words=("${COMP_WORDS[@]}") - ;; - cword) - cword=$COMP_CWORD - ;; - -n) - # assume COMP_WORDBREAKS is already set sanely - shift - ;; - esac - shift - done -} -fi fi # Generates completion reply with compgen, appending a space to possible @@ -585,7 +554,7 @@ __git_list_porcelain_commands () { local i IFS=" "$'\n' __git_compute_all_commands - for i in "help" $__git_all_commands + for i in $__git_all_commands do case $i in *--*) : helper pattern;; @@ -1118,6 +1087,14 @@ _git_fetch () __git_complete_remote_or_refspec } +__git_format_patch_options=" + --stdout --attach --no-attach --thread --thread= --output-directory + --numbered --start-number --numbered-files --keep-subject --signoff + --signature --no-signature --in-reply-to= --cc= --full-index --binary + --not --all --cover-letter --no-prefix --src-prefix= --dst-prefix= + --inline --suffix= --ignore-if-in-upstream --subject-prefix= +" + _git_format_patch () { case "$cur" in @@ -1128,21 +1105,7 @@ _git_format_patch () return ;; --*) - __gitcomp " - --stdout --attach --no-attach --thread --thread= - --output-directory - --numbered --start-number - --numbered-files - --keep-subject - --signoff --signature --no-signature - --in-reply-to= --cc= - --full-index --binary - --not --all - --cover-letter - --no-prefix --src-prefix= --dst-prefix= - --inline --suffix= --ignore-if-in-upstream - --subject-prefix= - " + __gitcomp "$__git_format_patch_options" return ;; esac @@ -1556,6 +1519,12 @@ _git_send_email () __gitcomp "ssl tls" "" "${cur##--smtp-encryption=}" return ;; + --thread=*) + __gitcomp " + deep shallow + " "" "${cur##--thread=}" + return + ;; --*) __gitcomp "--annotate --bcc --cc --cc-cmd --chain-reply-to --compose --confirm= --dry-run --envelope-sender @@ -1565,11 +1534,12 @@ _git_send_email () --signed-off-by-cc --smtp-pass --smtp-server --smtp-server-port --smtp-encryption= --smtp-user --subject --suppress-cc= --suppress-from --thread --to - --validate --no-validate" + --validate --no-validate + $__git_format_patch_options" return ;; esac - COMPREPLY=() + __git_complete_revlist } _git_stage () @@ -2431,20 +2401,71 @@ __gitk_main () __git_complete_revlist } -__git_func_wrap () -{ - if [[ -n ${ZSH_VERSION-} ]]; then - emulate -L bash - setopt KSH_TYPESET +if [[ -n ${ZSH_VERSION-} ]]; then + echo "WARNING: this script is deprecated, please see git-completion.zsh" 1>&2 - # workaround zsh's bug that leaves 'words' as a special - # variable in versions < 4.3.12 - typeset -h words + autoload -U +X compinit && compinit - # workaround zsh's bug that quotes spaces in the COMPREPLY - # array if IFS doesn't contain spaces. - typeset -h IFS - fi + __gitcomp () + { + emulate -L zsh + + local cur_="${3-$cur}" + + case "$cur_" in + --*=) + ;; + *) + local c IFS=$' \t\n' + local -a array + for c in ${=1}; do + c="$c${4-}" + case $c in + --*=*|*.) ;; + *) c="$c " ;; + esac + array+=("$c") + done + compset -P '*[=:]' + compadd -Q -S '' -p "${2-}" -a -- array && _ret=0 + ;; + esac + } + + __gitcomp_nl () + { + emulate -L zsh + + local IFS=$'\n' + compset -P '*[=:]' + compadd -Q -S "${4- }" -p "${2-}" -- ${=1} && _ret=0 + } + + __git_zsh_helper () + { + emulate -L ksh + local cur cword prev + cur=${words[CURRENT-1]} + prev=${words[CURRENT-2]} + let cword=CURRENT-1 + __${service}_main + } + + _git () + { + emulate -L zsh + local _ret=1 + __git_zsh_helper + let _ret && _default -S '' && _ret=0 + return _ret + } + + compdef _git git gitk + return +fi + +__git_func_wrap () +{ local cur words cword prev _get_comp_words_by_ref -n =: cur words cword prev $1 diff --git a/contrib/completion/git-completion.tcsh b/contrib/completion/git-completion.tcsh new file mode 100644 index 0000000000..8aafb63315 --- /dev/null +++ b/contrib/completion/git-completion.tcsh @@ -0,0 +1,107 @@ +#!tcsh +# +# tcsh completion support for core Git. +# +# Copyright (C) 2012 Marc Khouzam <marc.khouzam@gmail.com> +# Distributed under the GNU General Public License, version 2.0. +# +# When sourced, this script will generate a new script that uses +# the git-completion.bash script provided by core Git. This new +# script can be used by tcsh to perform git completion. +# The current script also issues the necessary tcsh 'complete' +# commands. +# +# To use this completion script: +# +# 1) Copy both this file and the bash completion script to ${HOME}. +# You _must_ use the name ${HOME}/.git-completion.bash for the +# bash script. +# (e.g. ~/.git-completion.tcsh and ~/.git-completion.bash). +# 2) Add the following line to your .tcshrc/.cshrc: +# source ~/.git-completion.tcsh +# 3) For completion similar to bash, it is recommended to also +# add the following line to your .tcshrc/.cshrc: +# set autolist=ambiguous +# It will tell tcsh to list the possible completion choices. + +set __git_tcsh_completion_original_script = ${HOME}/.git-completion.bash +set __git_tcsh_completion_script = ${HOME}/.git-completion.tcsh.bash + +# Check that the user put the script in the right place +if ( ! -e ${__git_tcsh_completion_original_script} ) then + echo "git-completion.tcsh: Cannot find: ${__git_tcsh_completion_original_script}. Git completion will not work." + exit +endif + +cat << EOF > ${__git_tcsh_completion_script} +#!bash +# +# This script is GENERATED and will be overwritten automatically. +# Do not modify it directly. Instead, modify git-completion.tcsh +# and source it again. + +source ${__git_tcsh_completion_original_script} + +# Set COMP_WORDS in a way that can be handled by the bash script. +COMP_WORDS=(\$2) + +# The cursor is at the end of parameter #1. +# We must check for a space as the last character which will +# tell us that the previous word is complete and the cursor +# is on the next word. +if [ "\${2: -1}" == " " ]; then + # The last character is a space, so our location is at the end + # of the command-line array + COMP_CWORD=\${#COMP_WORDS[@]} +else + # The last character is not a space, so our location is on the + # last word of the command-line array, so we must decrement the + # count by 1 + COMP_CWORD=\$((\${#COMP_WORDS[@]}-1)) +fi + +# Call _git() or _gitk() of the bash script, based on the first argument +_\${1} + +IFS=\$'\n' +if [ \${#COMPREPLY[*]} -gt 0 ]; then + echo "\${COMPREPLY[*]}" | sort | uniq +else + # No completions suggested. In this case, we want tcsh to perform + # standard file completion. However, there does not seem to be way + # to tell tcsh to do that. To help the user, we try to simulate + # file completion directly in this script. + # + # Known issues: + # - Possible completions are shown with their directory prefix. + # - Completions containing shell variables are not handled. + # - Completions with ~ as the first character are not handled. + + # No file completion should be done unless we are completing beyond + # the git sub-command. An improvement on the bash completion :) + if [ \${COMP_CWORD} -gt 1 ]; then + TO_COMPLETE="\${COMP_WORDS[\${COMP_CWORD}]}" + + # We don't support ~ expansion: too tricky. + if [ "\${TO_COMPLETE:0:1}" != "~" ]; then + # Use ls so as to add the '/' at the end of directories. + RESULT=(\`ls -dp \${TO_COMPLETE}* 2> /dev/null\`) + echo \${RESULT[*]} + + # If there is a single completion and it is a directory, + # we output it a second time to trick tcsh into not adding a space + # after it. + if [ \${#RESULT[*]} -eq 1 ] && [ "\${RESULT[0]: -1}" == "/" ]; then + echo \${RESULT[*]} + fi + fi + fi +fi + +EOF + +# Don't need this variable anymore, so don't pollute the users environment +unset __git_tcsh_completion_original_script + +complete git 'p,*,`bash ${__git_tcsh_completion_script} git "${COMMAND_LINE}"`,' +complete gitk 'p,*,`bash ${__git_tcsh_completion_script} gitk "${COMMAND_LINE}"`,' diff --git a/contrib/completion/git-completion.zsh b/contrib/completion/git-completion.zsh new file mode 100644 index 0000000000..45775021ff --- /dev/null +++ b/contrib/completion/git-completion.zsh @@ -0,0 +1,78 @@ +#compdef git gitk + +# zsh completion wrapper for git +# +# You need git's bash completion script installed somewhere, by default on the +# same directory as this script. +# +# If your script is on ~/.git-completion.sh instead, you can configure it on +# your ~/.zshrc: +# +# zstyle ':completion:*:*:git:*' script ~/.git-completion.sh +# +# The recommended way to install this script is to copy to +# '~/.zsh/completion/_git', and then add the following to your ~/.zshrc file: +# +# fpath=(~/.zsh/completion $fpath) + +complete () +{ + # do nothing + return 0 +} + +zstyle -s ":completion:*:*:git:*" script script +test -z "$script" && script="$(dirname ${funcsourcetrace[1]%:*})"/git-completion.bash +ZSH_VERSION='' . "$script" + +__gitcomp () +{ + emulate -L zsh + + local cur_="${3-$cur}" + + case "$cur_" in + --*=) + ;; + *) + local c IFS=$' \t\n' + local -a array + for c in ${=1}; do + c="$c${4-}" + case $c in + --*=*|*.) ;; + *) c="$c " ;; + esac + array+=("$c") + done + compset -P '*[=:]' + compadd -Q -S '' -p "${2-}" -a -- array && _ret=0 + ;; + esac +} + +__gitcomp_nl () +{ + emulate -L zsh + + local IFS=$'\n' + compset -P '*[=:]' + compadd -Q -S "${4- }" -p "${2-}" -- ${=1} && _ret=0 +} + +_git () +{ + local _ret=1 + () { + emulate -L ksh + local cur cword prev + cur=${words[CURRENT-1]} + prev=${words[CURRENT-2]} + let cword=CURRENT-1 + __${service}_main + } + let _ret && _default -S '' && _ret=0 + return _ret +} + +_git diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh index 5ab488cd65..9bef0531c5 100644 --- a/contrib/completion/git-prompt.sh +++ b/contrib/completion/git-prompt.sh @@ -10,9 +10,22 @@ # 1) Copy this file to somewhere (e.g. ~/.git-prompt.sh). # 2) Add the following line to your .bashrc/.zshrc: # source ~/.git-prompt.sh -# 3) Change your PS1 to also show the current branch: -# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' -# ZSH: PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ ' +# 3a) Change your PS1 to call __git_ps1 as +# command-substitution: +# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' +# ZSH: PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ ' +# the optional argument will be used as format string. +# 3b) Alternatively, if you are using bash, __git_ps1 can be +# used for PROMPT_COMMAND with two parameters, <pre> and +# <post>, which are strings you would put in $PS1 before +# and after the status string generated by the git-prompt +# machinery. e.g. +# PROMPT_COMMAND='__git_ps1 "\u@\h:\w" "\\\$ "' +# will show username, at-sign, host, colon, cwd, then +# various status string, followed by dollar and SP, as +# your prompt. +# Optionally, you can supply a third argument with a printf +# format string to finetune the output of the branch status # # The argument to __git_ps1 will be displayed only if you are currently # in a git repository. The %s token will be the name of the current @@ -58,6 +71,10 @@ # branch relative to newer tag or branch (master~4) # describe relative to older annotated tag (v1.6.3.1-13-gdd42c2f) # default exactly matching tag +# +# If you would like a colored hint about the current dirty state, set +# GIT_PS1_SHOWCOLORHINTS to a nonempty value. The colors are based on +# the colored output of "git status -sb". # __gitdir accepts 0 or 1 arguments (i.e., location) # returns location of .git repo @@ -204,11 +221,43 @@ __git_ps1_show_upstream () # __git_ps1 accepts 0 or 1 arguments (i.e., format string) -# returns text to add to bash PS1 prompt (includes branch name) +# when called from PS1 using command substitution +# in this mode it prints text to add to bash PS1 prompt (includes branch name) +# +# __git_ps1 requires 2 or 3 arguments when called from PROMPT_COMMAND (pc) +# in that case it _sets_ PS1. The arguments are parts of a PS1 string. +# when two arguments are given, the first is prepended and the second appended +# to the state string when assigned to PS1. +# The optional third parameter will be used as printf format string to further +# customize the output of the git-status string. +# In this mode you can request colored hints using GIT_PS1_SHOWCOLORHINTS=true __git_ps1 () { + local pcmode=no + local detached=no + local ps1pc_start='\u@\h:\w ' + local ps1pc_end='\$ ' + local printf_format=' (%s)' + + case "$#" in + 2|3) pcmode=yes + ps1pc_start="$1" + ps1pc_end="$2" + printf_format="${3:-$printf_format}" + ;; + 0|1) printf_format="${1:-$printf_format}" + ;; + *) return + ;; + esac + local g="$(__gitdir)" - if [ -n "$g" ]; then + if [ -z "$g" ]; then + if [ $pcmode = yes ]; then + #In PC mode PS1 always needs to be set + PS1="$ps1pc_start$ps1pc_end" + fi + else local r="" local b="" if [ -f "$g/rebase-merge/interactive" ]; then @@ -235,7 +284,7 @@ __git_ps1 () fi b="$(git symbolic-ref HEAD 2>/dev/null)" || { - + detached=yes b="$( case "${GIT_PS1_DESCRIBE_STYLE-}" in (contains) @@ -294,6 +343,53 @@ __git_ps1 () fi local f="$w$i$s$u" - printf -- "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r$p" + if [ $pcmode = yes ]; then + local gitstring= + if [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then + local c_red='\e[31m' + local c_green='\e[32m' + local c_lblue='\e[1;34m' + local c_clear='\e[0m' + local bad_color=$c_red + local ok_color=$c_green + local branch_color="$c_clear" + local flags_color="$c_lblue" + local branchstring="$c${b##refs/heads/}" + + if [ $detached = no ]; then + branch_color="$ok_color" + else + branch_color="$bad_color" + fi + + # Setting gitstring directly with \[ and \] around colors + # is necessary to prevent wrapping issues! + gitstring="\[$branch_color\]$branchstring\[$c_clear\]" + + if [ -n "$w$i$s$u$r$p" ]; then + gitstring="$gitstring " + fi + if [ "$w" = "*" ]; then + gitstring="$gitstring\[$bad_color\]$w" + fi + if [ -n "$i" ]; then + gitstring="$gitstring\[$ok_color\]$i" + fi + if [ -n "$s" ]; then + gitstring="$gitstring\[$flags_color\]$s" + fi + if [ -n "$u" ]; then + gitstring="$gitstring\[$bad_color\]$u" + fi + gitstring="$gitstring\[$c_clear\]$r$p" + else + gitstring="$c${b##refs/heads/}${f:+ $f}$r$p" + fi + gitstring=$(printf -- "$printf_format" "$gitstring") + PS1="$ps1pc_start$gitstring$ps1pc_end" + else + # NO color option unless in PROMPT_COMMAND mode + printf -- "$printf_format" "$c${b##refs/heads/}${f:+ $f}$r$p" + fi fi } |