diff options
Diffstat (limited to 'contrib/completion')
| -rw-r--r-- | contrib/completion/git-completion.bash | 466 | ||||
| -rw-r--r-- | contrib/completion/git-completion.tcsh | 128 | ||||
| -rw-r--r-- | contrib/completion/git-completion.zsh | 216 | ||||
| -rw-r--r-- | contrib/completion/git-prompt.sh | 340 |
4 files changed, 911 insertions, 239 deletions
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index cda095de6b..e1b7313072 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -13,6 +13,7 @@ # *) .git/remotes file names # *) git 'subcommands' # *) tree paths within 'ref:path/to/file' expressions +# *) file paths within current working directory and index # *) common --long-options # # To use these routines: @@ -23,10 +24,6 @@ # 3) Consider changing your PS1 to also show the current branch, # see git-prompt.sh for details. -if [[ -n ${ZSH_VERSION-} ]]; then - autoload -U +X bashcompinit && bashcompinit -fi - case "$COMP_WORDBREAKS" in *:*) : great ;; *) COMP_WORDBREAKS="$COMP_WORDBREAKS:" @@ -36,8 +33,6 @@ esac # returns location of .git repo __gitdir () { - # Note: this function is duplicated in git-prompt.sh - # When updating it, make sure you update the other one to match. if [ -z "${1-}" ]; then if [ -n "${__git_dir-}" ]; then echo "$__git_dir" @@ -56,19 +51,6 @@ __gitdir () fi } -__gitcomp_1 () -{ - local c IFS=$' \t\n' - for c in $1; do - c="$c$2" - case $c in - --*=*|*.) ;; - *) c="$c " ;; - esac - printf '%s\n' "$c" - done -} - # The following function is based on code from: # # bash_completion - programmable completion functions for bash 3.2+ @@ -169,7 +151,6 @@ __git_reassemble_comp_words_by_ref() } if ! type _get_comp_words_by_ref >/dev/null 2>&1; then -if [[ -z ${ZSH_VERSION:+set} ]]; then _get_comp_words_by_ref () { local exclude cur_ words_ cword_ @@ -197,36 +178,20 @@ _get_comp_words_by_ref () shift done } -else -_get_comp_words_by_ref () +fi + +__gitcompadd () { - while [ $# -gt 0 ]; do - case "$1" in - cur) - cur=${COMP_WORDS[COMP_CWORD]} - ;; - prev) - prev=${COMP_WORDS[COMP_CWORD-1]} - ;; - words) - words=("${COMP_WORDS[@]}") - ;; - cword) - cword=$COMP_CWORD - ;; - -n) - # assume COMP_WORDBREAKS is already set sanely - shift - ;; - esac - shift + local i=0 + for x in $1; do + if [[ "$x" == "$3"* ]]; then + COMPREPLY[i++]="$2$x$4" + fi done } -fi -fi -# Generates completion reply with compgen, appending a space to possible -# completion words, if necessary. +# Generates completion reply, appending a space to possible completion words, +# if necessary. # It accepts 1 to 4 arguments: # 1: List of possible completion words. # 2: A prefix to be added to each possible completion word (optional). @@ -238,19 +203,25 @@ __gitcomp () case "$cur_" in --*=) - COMPREPLY=() ;; *) - local IFS=$'\n' - COMPREPLY=($(compgen -P "${2-}" \ - -W "$(__gitcomp_1 "${1-}" "${4-}")" \ - -- "$cur_")) + local c i=0 IFS=$' \t\n' + for c in $1; do + c="$c${4-}" + if [[ $c == "$cur_"* ]]; then + case $c in + --*=*|*.) ;; + *) c="$c " ;; + esac + COMPREPLY[i++]="${2-}$c" + fi + done ;; esac } -# Generates completion reply with compgen from newline-separated possible -# completion words by appending a space to all of them. +# Generates completion reply from newline-separated possible completion words +# by appending a space to all of them. # It accepts 1 to 4 arguments: # 1: List of possible completion words, separated by a single newline. # 2: A prefix to be added to each possible completion word (optional). @@ -261,7 +232,69 @@ __gitcomp () __gitcomp_nl () { local IFS=$'\n' - COMPREPLY=($(compgen -P "${2-}" -S "${4- }" -W "$1" -- "${3-$cur}")) + __gitcompadd "$1" "${2-}" "${3-$cur}" "${4- }" +} + +# Generates completion reply with compgen from newline-separated possible +# completion filenames. +# It accepts 1 to 3 arguments: +# 1: List of possible completion filenames, separated by a single newline. +# 2: A directory prefix to be added to each possible completion filename +# (optional). +# 3: Generate possible completion matches for this word (optional). +__gitcomp_file () +{ + local IFS=$'\n' + + # XXX does not work when the directory prefix contains a tilde, + # since tilde expansion is not applied. + # This means that COMPREPLY will be empty and Bash default + # completion will be used. + __gitcompadd "$1" "${2-}" "${3-$cur}" "" + + # use a hack to enable file mode in bash < 4 + compopt -o filenames +o nospace 2>/dev/null || + compgen -f /non-existing-dir/ > /dev/null +} + +# Execute 'git ls-files', unless the --committable option is specified, in +# which case it runs 'git diff-index' to find out the files that can be +# committed. It return paths relative to the directory specified in the first +# argument, and using the options specified in the second argument. +__git_ls_files_helper () +{ + ( + test -n "${CDPATH+set}" && unset CDPATH + cd "$1" + if [ "$2" == "--committable" ]; then + git diff-index --name-only --relative HEAD + else + # NOTE: $2 is not quoted in order to support multiple options + git ls-files --exclude-standard $2 + fi + ) 2>/dev/null +} + + +# __git_index_files accepts 1 or 2 arguments: +# 1: Options to pass to ls-files (required). +# 2: A directory path (optional). +# If provided, only files within the specified directory are listed. +# Sub directories are never recursed. Path must have a trailing +# slash. +__git_index_files () +{ + local dir="$(__gitdir)" root="${2-.}" file + + if [ -d "$dir" ]; then + __git_ls_files_helper "$root" "$1" | + while read -r file; do + case "$file" in + ?*/*) echo "${file%%/*}" ;; + *) echo "$file" ;; + esac + done | sort | uniq + fi } __git_heads () @@ -336,14 +369,8 @@ __git_refs () done ;; *) - git ls-remote "$dir" HEAD ORIG_HEAD 'refs/tags/*' 'refs/heads/*' 'refs/remotes/*' 2>/dev/null | \ - while read -r hash i; do - case "$i" in - *^{}) ;; - refs/*) echo "${i#refs/*/}" ;; - *) echo "$i" ;; - esac - done + echo "HEAD" + git for-each-ref --format="%(refname:short)" -- "refs/remotes/$dir/" | sed -e "s#^$dir/##" ;; esac } @@ -428,7 +455,7 @@ __git_complete_revlist_file () *) pfx="$ref:$pfx" ;; esac - __gitcomp_nl "$(git --git-dir="$(__gitdir)" ls-tree "$ls" \ + __gitcomp_nl "$(git --git-dir="$(__gitdir)" ls-tree "$ls" 2>/dev/null \ | sed '/^100... blob /{ s,^.* ,, s,$, , @@ -461,6 +488,25 @@ __git_complete_revlist_file () } +# __git_complete_index_file requires 1 argument: +# 1: the options to pass to ls-file +# +# The exception is --committable, which finds the files appropriate commit. +__git_complete_index_file () +{ + local pfx="" cur_="$cur" + + case "$cur_" in + ?*/*) + pfx="${cur_%/*}" + cur_="${cur_##*/}" + pfx="${pfx}/" + ;; + esac + + __gitcomp_file "$(__git_index_files "$1" "$pfx")" "$pfx" "$cur_" +} + __git_complete_file () { __git_complete_revlist_file @@ -486,7 +532,6 @@ __git_complete_remote_or_refspec () case "$cmd" in push) no_complete_refspec=1 ;; fetch) - COMPREPLY=() return ;; *) ;; @@ -502,7 +547,6 @@ __git_complete_remote_or_refspec () return fi if [ $no_complete_refspec = 1 ]; then - COMPREPLY=() return fi [ "$remote" = "." ] && remote= @@ -562,10 +606,19 @@ __git_complete_strategy () return 1 } +__git_commands () { + if test -n "${GIT_TESTING_COMMAND_COMPLETION:-}" + then + printf "%s" "${GIT_TESTING_COMMAND_COMPLETION}" + else + git help -a|egrep '^ [a-zA-Z0-9]' + fi +} + __git_list_all_commands () { local i IFS=" "$'\n' - for i in $(git help -a|egrep '^ [a-zA-Z0-9]') + for i in $(__git_commands) do case $i in *--*) : helper pattern;; @@ -585,7 +638,7 @@ __git_list_porcelain_commands () { local i IFS=" "$'\n' __git_compute_all_commands - for i in "help" $__git_all_commands + for i in $__git_all_commands do case $i in *--*) : helper pattern;; @@ -594,6 +647,8 @@ __git_list_porcelain_commands () archimport) : import;; cat-file) : plumbing;; check-attr) : plumbing;; + check-ignore) : plumbing;; + check-mailmap) : plumbing;; check-ref-format) : plumbing;; checkout-index) : plumbing;; commit-tree) : plumbing;; @@ -753,6 +808,43 @@ __git_has_doubledash () return 1 } +# Try to count non option arguments passed on the command line for the +# specified git command. +# When options are used, it is necessary to use the special -- option to +# tell the implementation were non option arguments begin. +# XXX this can not be improved, since options can appear everywhere, as +# an example: +# git mv x -n y +# +# __git_count_arguments requires 1 argument: the git command executed. +__git_count_arguments () +{ + local word i c=0 + + # Skip "git" (first argument) + for ((i=1; i < ${#words[@]}; i++)); do + word="${words[i]}" + + case "$word" in + --) + # Good; we can assume that the following are only non + # option arguments. + ((c = 0)) + ;; + "$1") + # Skip the specified git command and discard git + # main options + ((c = 0)) + ;; + ?*) + ((c++)) + ;; + esac + done + + printf "%d" $c +} + __git_whitespacelist="nowarn warn error error-all fix" _git_am () @@ -776,7 +868,6 @@ _git_am () " return esac - COMPREPLY=() } _git_apply () @@ -796,13 +887,10 @@ _git_apply () " return esac - COMPREPLY=() } _git_add () { - __git_has_doubledash && return - case "$cur" in --*) __gitcomp " @@ -811,7 +899,9 @@ _git_add () " return esac - COMPREPLY=() + + # XXX should we check for --update and --all options ? + __git_complete_index_file "--others --modified" } _git_archive () @@ -856,7 +946,6 @@ _git_bisect () __gitcomp_nl "$(__git_refs)" ;; *) - COMPREPLY=() ;; esac } @@ -949,9 +1038,14 @@ _git_cherry () _git_cherry_pick () { + local dir="$(__gitdir)" + if [ -f "$dir"/CHERRY_PICK_HEAD ]; then + __gitcomp "--continue --quit --abort" + return + fi case "$cur" in --*) - __gitcomp "--edit --no-commit" + __gitcomp "--edit --no-commit --signoff --strategy= --mainline" ;; *) __gitcomp_nl "$(__git_refs)" @@ -961,15 +1055,15 @@ _git_cherry_pick () _git_clean () { - __git_has_doubledash && return - case "$cur" in --*) __gitcomp "--dry-run --quiet" return ;; esac - COMPREPLY=() + + # XXX should we check for -x option ? + __git_complete_index_file "--others" } _git_clone () @@ -995,12 +1089,16 @@ _git_clone () return ;; esac - COMPREPLY=() } _git_commit () { - __git_has_doubledash && return + case "$prev" in + -c|-C) + __gitcomp_nl "$(__git_refs)" "" "${cur}" + return + ;; + esac case "$cur" in --cleanup=*) @@ -1029,7 +1127,13 @@ _git_commit () " return esac - COMPREPLY=() + + if git rev-parse --verify --quiet HEAD >/dev/null; then + __git_complete_index_file "--committable" + else + # This is the first commit + __git_complete_index_file "--cached" + fi } _git_describe () @@ -1045,6 +1149,8 @@ _git_describe () __gitcomp_nl "$(__git_refs)" } +__git_diff_algorithms="myers minimal patience histogram" + __git_diff_common_options="--stat --numstat --shortstat --summary --patch-with-stat --name-only --name-status --color --no-color --color-words --no-renames --check @@ -1055,10 +1161,11 @@ __git_diff_common_options="--stat --numstat --shortstat --summary --no-ext-diff --no-prefix --src-prefix= --dst-prefix= --inter-hunk-context= - --patience - --raw + --patience --histogram --minimal + --raw --word-diff --dirstat --dirstat= --dirstat-by-file --dirstat-by-file= --cumulative + --diff-algorithm= " _git_diff () @@ -1066,6 +1173,10 @@ _git_diff () __git_has_doubledash && return case "$cur" in + --diff-algorithm=*) + __gitcomp "$__git_diff_algorithms" "" "${cur##--diff-algorithm=}" + return + ;; --*) __gitcomp "--cached --staged --pickaxe-all --pickaxe-regex --base --ours --theirs --no-index @@ -1099,7 +1210,7 @@ _git_difftool () return ;; esac - __git_complete_file + __git_complete_revlist_file } __git_fetch_options=" @@ -1118,6 +1229,15 @@ _git_fetch () __git_complete_remote_or_refspec } +__git_format_patch_options=" + --stdout --attach --no-attach --thread --thread= --no-thread + --numbered --start-number --numbered-files --keep-subject --signoff + --signature --no-signature --in-reply-to= --cc= --full-index --binary + --not --all --cover-letter --no-prefix --src-prefix= --dst-prefix= + --inline --suffix= --ignore-if-in-upstream --subject-prefix= + --output-directory --reroll-count --to= --quiet --notes +" + _git_format_patch () { case "$cur" in @@ -1128,21 +1248,7 @@ _git_format_patch () return ;; --*) - __gitcomp " - --stdout --attach --no-attach --thread --thread= - --output-directory - --numbered --start-number - --numbered-files - --keep-subject - --signoff --signature --no-signature - --in-reply-to= --cc= - --full-index --binary - --not --all - --cover-letter - --no-prefix --src-prefix= --dst-prefix= - --inline --suffix= --ignore-if-in-upstream - --subject-prefix= - " + __gitcomp "$__git_format_patch_options" return ;; esac @@ -1160,7 +1266,6 @@ _git_fsck () return ;; esac - COMPREPLY=() } _git_gc () @@ -1171,7 +1276,6 @@ _git_gc () return ;; esac - COMPREPLY=() } _git_gitk () @@ -1248,13 +1352,10 @@ _git_init () return ;; esac - COMPREPLY=() } _git_ls_files () { - __git_has_doubledash && return - case "$cur" in --*) __gitcomp "--cached --deleted --modified --others --ignored @@ -1267,7 +1368,10 @@ _git_ls_files () return ;; esac - COMPREPLY=() + + # XXX ignore options like --modified and always suggest all cached + # files. + __git_complete_index_file "--cached" } _git_ls_remote () @@ -1383,7 +1487,6 @@ _git_mergetool () return ;; esac - COMPREPLY=() } _git_merge_base () @@ -1399,7 +1502,14 @@ _git_mv () return ;; esac - COMPREPLY=() + + if [ $(__git_count_arguments "mv") -gt 0 ]; then + # We need to show both cached and untracked files (including + # empty directories) since this may not be the last argument. + __git_complete_index_file "--cached --others --directory" + else + __git_complete_index_file "--cached" + fi } _git_name_rev () @@ -1556,6 +1666,12 @@ _git_send_email () __gitcomp "ssl tls" "" "${cur##--smtp-encryption=}" return ;; + --thread=*) + __gitcomp " + deep shallow + " "" "${cur##--thread=}" + return + ;; --*) __gitcomp "--annotate --bcc --cc --cc-cmd --chain-reply-to --compose --confirm= --dry-run --envelope-sender @@ -1565,11 +1681,12 @@ _git_send_email () --signed-off-by-cc --smtp-pass --smtp-server --smtp-server-port --smtp-encryption= --smtp-user --subject --suppress-cc= --suppress-from --thread --to - --validate --no-validate" + --validate --no-validate + $__git_format_patch_options" return ;; esac - COMPREPLY=() + __git_complete_revlist } _git_stage () @@ -1583,7 +1700,7 @@ __git_config_get_set_variables () while [ $c -gt 1 ]; do word="${words[c]}" case "$word" in - --global|--system|--file=*) + --system|--global|--local|--file=*) config_file="$word" break ;; @@ -1610,7 +1727,7 @@ __git_config_get_set_variables () _git_config () { case "$prev" in - branch.*.remote) + branch.*.remote|branch.*.pushremote) __gitcomp_nl "$(__git_remotes)" return ;; @@ -1618,11 +1735,19 @@ _git_config () __gitcomp_nl "$(__git_refs)" return ;; + branch.*.rebase) + __gitcomp "false true" + return + ;; + remote.pushdefault) + __gitcomp_nl "$(__git_remotes)" + return + ;; remote.*.fetch) local remote="${prev#remote.}" remote="${remote%.fetch}" if [ -z "$cur" ]; then - COMPREPLY=("refs/heads/") + __gitcomp_nl "refs/heads/" "" "" "" return fi __gitcomp_nl "$(__git_refs_remotes "$remote")" @@ -1657,6 +1782,10 @@ _git_config () " return ;; + diff.submodule) + __gitcomp "log short" + return + ;; help.format) __gitcomp "man info web html" return @@ -1682,14 +1811,13 @@ _git_config () return ;; *.*) - COMPREPLY=() return ;; esac case "$cur" in --*) __gitcomp " - --global --system --file= + --system --global --local --file= --list --replace-all --get --get-all --get-regexp --add --unset --unset-all @@ -1699,7 +1827,7 @@ _git_config () ;; branch.*.*) local pfx="${cur%.*}." cur_="${cur##*.}" - __gitcomp "remote merge mergeoptions rebase" "$pfx" "$cur_" + __gitcomp "remote pushremote merge mergeoptions rebase" "$pfx" "$cur_" return ;; branch.*) @@ -1830,7 +1958,6 @@ _git_config () core.fileMode core.fsyncobjectfiles core.gitProxy - core.ignoreCygwinFSTricks core.ignoreStat core.ignorecase core.logAllRefUpdates @@ -1852,16 +1979,18 @@ _git_config () core.whitespace core.worktree diff.autorefreshindex - diff.statGraphWidth diff.external diff.ignoreSubmodules diff.mnemonicprefix diff.noprefix diff.renameLimit diff.renames + diff.statGraphWidth + diff.submodule diff.suppressBlankEmpty diff.tool diff.wordRegex + diff.algorithm difftool. difftool.prompt fetch.recurseSubmodules @@ -1992,6 +2121,7 @@ _git_config () receive.fsckObjects receive.unpackLimit receive.updateserverinfo + remote.pushdefault remotes. repack.usedeltabaseoffset rerere.autoupdate @@ -2062,7 +2192,6 @@ _git_remote () __gitcomp "$c" ;; *) - COMPREPLY=() ;; esac } @@ -2098,15 +2227,14 @@ _git_revert () _git_rm () { - __git_has_doubledash && return - case "$cur" in --*) __gitcomp "--cached --dry-run --ignore-unmatch --quiet" return ;; esac - COMPREPLY=() + + __git_complete_index_file "--cached" } _git_shortlog () @@ -2136,6 +2264,10 @@ _git_show () " "" "${cur#*=}" return ;; + --diff-algorithm=*) + __gitcomp "$__git_diff_algorithms" "" "${cur##--diff-algorithm=}" + return + ;; --*) __gitcomp "--pretty= --format= --abbrev-commit --oneline $__git_diff_common_options @@ -2143,7 +2275,7 @@ _git_show () return ;; esac - __git_complete_file + __git_complete_revlist_file } _git_show_branch () @@ -2175,8 +2307,6 @@ _git_stash () *) if [ -z "$(__git_find_on_cmdline "$save_opts")" ]; then __gitcomp "$subcommands" - else - COMPREPLY=() fi ;; esac @@ -2189,14 +2319,12 @@ _git_stash () __gitcomp "--index --quiet" ;; show,--*|drop,--*|branch,--*) - COMPREPLY=() ;; show,*|apply,*|drop,*|pop,*|branch,*) __gitcomp_nl "$(git --git-dir="$(__gitdir)" stash list \ | sed -n -e 's/:.*//p')" ;; *) - COMPREPLY=() ;; esac fi @@ -2206,7 +2334,7 @@ _git_submodule () { __git_has_doubledash && return - local subcommands="add status init update summary foreach sync" + local subcommands="add status init deinit update summary foreach sync" if [ -z "$(__git_find_on_cmdline "$subcommands")" ]; then case "$cur" in --*) @@ -2238,7 +2366,7 @@ _git_svn () --no-metadata --use-svm-props --use-svnsync-props --log-window-size= --no-checkout --quiet --repack-flags --use-log-author --localtime - --ignore-paths= $remote_opts + --ignore-paths= --include-paths= $remote_opts " local init_opts=" --template= --shared= --trunk= --tags= @@ -2313,7 +2441,6 @@ _git_svn () __gitcomp "--revision= --parent" ;; *) - COMPREPLY=() ;; esac fi @@ -2338,13 +2465,10 @@ _git_tag () case "$prev" in -m|-F) - COMPREPLY=() ;; -*|tag) if [ $f = 1 ]; then __gitcomp_nl "$(__git_tags)" - else - COMPREPLY=() fi ;; *) @@ -2366,9 +2490,10 @@ __git_main () i="${words[c]}" case "$i" in --git-dir=*) __git_dir="${i#--git-dir=}" ;; + --git-dir) ((c++)) ; __git_dir="${words[c]}" ;; --bare) __git_dir="." ;; --help) command="help"; break ;; - -c) c=$((++c)) ;; + -c|--work-tree|--namespace) ((c++)) ;; -*) ;; *) command="$i"; break ;; esac @@ -2386,6 +2511,7 @@ __git_main () --exec-path --exec-path= --html-path + --man-path --info-path --work-tree= --namespace= @@ -2431,20 +2557,72 @@ __gitk_main () __git_complete_revlist } -__git_func_wrap () -{ - if [[ -n ${ZSH_VERSION-} ]]; then - emulate -L bash - setopt KSH_TYPESET +if [[ -n ${ZSH_VERSION-} ]]; then + echo "WARNING: this script is deprecated, please see git-completion.zsh" 1>&2 - # workaround zsh's bug that leaves 'words' as a special - # variable in versions < 4.3.12 - typeset -h words + autoload -U +X compinit && compinit - # workaround zsh's bug that quotes spaces in the COMPREPLY - # array if IFS doesn't contain spaces. - typeset -h IFS - fi + __gitcomp () + { + emulate -L zsh + + local cur_="${3-$cur}" + + case "$cur_" in + --*=) + ;; + *) + local c IFS=$' \t\n' + local -a array + for c in ${=1}; do + c="$c${4-}" + case $c in + --*=*|*.) ;; + *) c="$c " ;; + esac + array[${#array[@]}+1]="$c" + done + compset -P '*[=:]' + compadd -Q -S '' -p "${2-}" -a -- array && _ret=0 + ;; + esac + } + + __gitcomp_nl () + { + emulate -L zsh + + local IFS=$'\n' + compset -P '*[=:]' + compadd -Q -S "${4- }" -p "${2-}" -- ${=1} && _ret=0 + } + + __gitcomp_file () + { + emulate -L zsh + + local IFS=$'\n' + compset -P '*[=:]' + compadd -Q -p "${2-}" -f -- ${=1} && _ret=0 + } + + _git () + { + local _ret=1 cur cword prev + cur=${words[CURRENT]} + prev=${words[CURRENT-1]} + let cword=CURRENT-1 + emulate ksh -c __${service}_main + let _ret && _default && _ret=0 + return _ret + } + + compdef _git git gitk + return +fi + +__git_func_wrap () +{ local cur words cword prev _get_comp_words_by_ref -n =: cur words cword prev $1 diff --git a/contrib/completion/git-completion.tcsh b/contrib/completion/git-completion.tcsh new file mode 100644 index 0000000000..eaacaf0c3e --- /dev/null +++ b/contrib/completion/git-completion.tcsh @@ -0,0 +1,128 @@ +#!tcsh +# +# tcsh completion support for core Git. +# +# Copyright (C) 2012 Marc Khouzam <marc.khouzam@gmail.com> +# Distributed under the GNU General Public License, version 2.0. +# +# When sourced, this script will generate a new script that uses +# the git-completion.bash script provided by core Git. This new +# script can be used by tcsh to perform git completion. +# The current script also issues the necessary tcsh 'complete' +# commands. +# +# To use this completion script: +# +# 0) You need tcsh 6.16.00 or newer. +# 1) Copy both this file and the bash completion script to ${HOME}. +# You _must_ use the name ${HOME}/.git-completion.bash for the +# bash script. +# (e.g. ~/.git-completion.tcsh and ~/.git-completion.bash). +# 2) Add the following line to your .tcshrc/.cshrc: +# source ~/.git-completion.tcsh +# 3) For completion similar to bash, it is recommended to also +# add the following line to your .tcshrc/.cshrc: +# set autolist=ambiguous +# It will tell tcsh to list the possible completion choices. + +set __git_tcsh_completion_version = `\echo ${tcsh} | \sed 's/\./ /g'` +if ( ${__git_tcsh_completion_version[1]} < 6 || \ + ( ${__git_tcsh_completion_version[1]} == 6 && \ + ${__git_tcsh_completion_version[2]} < 16 ) ) then + echo "git-completion.tcsh: Your version of tcsh is too old, you need version 6.16.00 or newer. Git completion will not work." + exit +endif +unset __git_tcsh_completion_version + +set __git_tcsh_completion_original_script = ${HOME}/.git-completion.bash +set __git_tcsh_completion_script = ${HOME}/.git-completion.tcsh.bash + +# Check that the user put the script in the right place +if ( ! -e ${__git_tcsh_completion_original_script} ) then + echo "git-completion.tcsh: Cannot find: ${__git_tcsh_completion_original_script}. Git completion will not work." + exit +endif + +cat << EOF > ${__git_tcsh_completion_script} +#!bash +# +# This script is GENERATED and will be overwritten automatically. +# Do not modify it directly. Instead, modify git-completion.tcsh +# and source it again. + +source ${__git_tcsh_completion_original_script} + +# Remove the colon as a completion separator because tcsh cannot handle it +COMP_WORDBREAKS=\${COMP_WORDBREAKS//:} + +# For file completion, tcsh needs the '/' to be appended to directories. +# By default, the bash script does not do that. +# We can achieve this by using the below compatibility +# method of the git-completion.bash script. +__git_index_file_list_filter () +{ + __git_index_file_list_filter_compat +} + +# Set COMP_WORDS in a way that can be handled by the bash script. +COMP_WORDS=(\$2) + +# The cursor is at the end of parameter #1. +# We must check for a space as the last character which will +# tell us that the previous word is complete and the cursor +# is on the next word. +if [ "\${2: -1}" == " " ]; then + # The last character is a space, so our location is at the end + # of the command-line array + COMP_CWORD=\${#COMP_WORDS[@]} +else + # The last character is not a space, so our location is on the + # last word of the command-line array, so we must decrement the + # count by 1 + COMP_CWORD=\$((\${#COMP_WORDS[@]}-1)) +fi + +# Call _git() or _gitk() of the bash script, based on the first argument +_\${1} + +IFS=\$'\n' +if [ \${#COMPREPLY[*]} -eq 0 ]; then + # No completions suggested. In this case, we want tcsh to perform + # standard file completion. However, there does not seem to be way + # to tell tcsh to do that. To help the user, we try to simulate + # file completion directly in this script. + # + # Known issues: + # - Possible completions are shown with their directory prefix. + # - Completions containing shell variables are not handled. + # - Completions with ~ as the first character are not handled. + + # No file completion should be done unless we are completing beyond + # the git sub-command. An improvement on the bash completion :) + if [ \${COMP_CWORD} -gt 1 ]; then + TO_COMPLETE="\${COMP_WORDS[\${COMP_CWORD}]}" + + # We don't support ~ expansion: too tricky. + if [ "\${TO_COMPLETE:0:1}" != "~" ]; then + # Use ls so as to add the '/' at the end of directories. + COMPREPLY=(\`ls -dp \${TO_COMPLETE}* 2> /dev/null\`) + fi + fi +fi + +# tcsh does not automatically remove duplicates, so we do it ourselves +echo "\${COMPREPLY[*]}" | sort | uniq + +# If there is a single completion and it is a directory, we output it +# a second time to trick tcsh into not adding a space after it. +if [ \${#COMPREPLY[*]} -eq 1 ] && [ "\${COMPREPLY[0]: -1}" == "/" ]; then + echo "\${COMPREPLY[*]}" +fi + +EOF + +# Don't need this variable anymore, so don't pollute the users environment +unset __git_tcsh_completion_original_script + +complete git 'p,*,`bash ${__git_tcsh_completion_script} git "${COMMAND_LINE}"`,' +complete gitk 'p,*,`bash ${__git_tcsh_completion_script} gitk "${COMMAND_LINE}"`,' diff --git a/contrib/completion/git-completion.zsh b/contrib/completion/git-completion.zsh new file mode 100644 index 0000000000..fac5e711eb --- /dev/null +++ b/contrib/completion/git-completion.zsh @@ -0,0 +1,216 @@ +#compdef git gitk + +# zsh completion wrapper for git +# +# Copyright (c) 2012-2013 Felipe Contreras <felipe.contreras@gmail.com> +# +# You need git's bash completion script installed somewhere, by default it +# would be the location bash-completion uses. +# +# If your script is somewhere else, you can configure it on your ~/.zshrc: +# +# zstyle ':completion:*:*:git:*' script ~/.git-completion.sh +# +# The recommended way to install this script is to copy to '~/.zsh/_git', and +# then add the following to your ~/.zshrc file: +# +# fpath=(~/.zsh $fpath) + +complete () +{ + # do nothing + return 0 +} + +zstyle -T ':completion:*:*:git:*' tag-order && \ + zstyle ':completion:*:*:git:*' tag-order 'common-commands' + +zstyle -s ":completion:*:*:git:*" script script +if [ -z "$script" ]; then + local -a locations + local e + locations=( + '/etc/bash_completion.d/git' # fedora, old debian + '/usr/share/bash-completion/completions/git' # arch, ubuntu, new debian + '/usr/share/bash-completion/git' # gentoo + $(dirname ${funcsourcetrace[1]%:*})/git-completion.bash + ) + for e in $locations; do + test -f $e && script="$e" && break + done +fi +ZSH_VERSION='' . "$script" + +__gitcomp () +{ + emulate -L zsh + + local cur_="${3-$cur}" + + case "$cur_" in + --*=) + ;; + *) + local c IFS=$' \t\n' + local -a array + for c in ${=1}; do + c="$c${4-}" + case $c in + --*=*|*.) ;; + *) c="$c " ;; + esac + array+=("$c") + done + compset -P '*[=:]' + compadd -Q -S '' -p "${2-}" -a -- array && _ret=0 + ;; + esac +} + +__gitcomp_nl () +{ + emulate -L zsh + + local IFS=$'\n' + compset -P '*[=:]' + compadd -Q -S "${4- }" -p "${2-}" -- ${=1} && _ret=0 +} + +__gitcomp_file () +{ + emulate -L zsh + + local IFS=$'\n' + compset -P '*[=:]' + compadd -Q -p "${2-}" -f -- ${=1} && _ret=0 +} + +__git_zsh_bash_func () +{ + emulate -L ksh + + local command=$1 + + local completion_func="_git_${command//-/_}" + declare -f $completion_func >/dev/null && $completion_func && return + + local expansion=$(__git_aliased_command "$command") + if [ -n "$expansion" ]; then + completion_func="_git_${expansion//-/_}" + declare -f $completion_func >/dev/null && $completion_func + fi +} + +__git_zsh_cmd_common () +{ + local -a list + list=( + add:'add file contents to the index' + bisect:'find by binary search the change that introduced a bug' + branch:'list, create, or delete branches' + checkout:'checkout a branch or paths to the working tree' + clone:'clone a repository into a new directory' + commit:'record changes to the repository' + diff:'show changes between commits, commit and working tree, etc' + fetch:'download objects and refs from another repository' + grep:'print lines matching a pattern' + init:'create an empty Git repository or reinitialize an existing one' + log:'show commit logs' + merge:'join two or more development histories together' + mv:'move or rename a file, a directory, or a symlink' + pull:'fetch from and merge with another repository or a local branch' + push:'update remote refs along with associated objects' + rebase:'forward-port local commits to the updated upstream head' + reset:'reset current HEAD to the specified state' + rm:'remove files from the working tree and from the index' + show:'show various types of objects' + status:'show the working tree status' + tag:'create, list, delete or verify a tag object signed with GPG') + _describe -t common-commands 'common commands' list && _ret=0 +} + +__git_zsh_cmd_alias () +{ + local -a list + list=(${${${(0)"$(git config -z --get-regexp '^alias\.')"}#alias.}%$'\n'*}) + _describe -t alias-commands 'aliases' list $* && _ret=0 +} + +__git_zsh_cmd_all () +{ + local -a list + emulate ksh -c __git_compute_all_commands + list=( ${=__git_all_commands} ) + _describe -t all-commands 'all commands' list && _ret=0 +} + +__git_zsh_main () +{ + local curcontext="$curcontext" state state_descr line + typeset -A opt_args + local -a orig_words + + orig_words=( ${words[@]} ) + + _arguments -C \ + '(-p --paginate --no-pager)'{-p,--paginate}'[pipe all output into ''less'']' \ + '(-p --paginate)--no-pager[do not pipe git output into a pager]' \ + '--git-dir=-[set the path to the repository]: :_directories' \ + '--bare[treat the repository as a bare repository]' \ + '(- :)--version[prints the git suite version]' \ + '--exec-path=-[path to where your core git programs are installed]:: :_directories' \ + '--html-path[print the path where git''s HTML documentation is installed]' \ + '--info-path[print the path where the Info files are installed]' \ + '--man-path[print the manpath (see `man(1)`) for the man pages]' \ + '--work-tree=-[set the path to the working tree]: :_directories' \ + '--namespace=-[set the git namespace]' \ + '--no-replace-objects[do not use replacement refs to replace git objects]' \ + '(- :)--help[prints the synopsis and a list of the most commonly used commands]: :->arg' \ + '(-): :->command' \ + '(-)*:: :->arg' && return + + case $state in + (command) + _alternative \ + 'alias-commands:alias:__git_zsh_cmd_alias' \ + 'common-commands:common:__git_zsh_cmd_common' \ + 'all-commands:all:__git_zsh_cmd_all' && _ret=0 + ;; + (arg) + local command="${words[1]}" __git_dir + + if (( $+opt_args[--bare] )); then + __git_dir='.' + else + __git_dir=${opt_args[--git-dir]} + fi + + (( $+opt_args[--help] )) && command='help' + + words=( ${orig_words[@]} ) + + __git_zsh_bash_func $command + ;; + esac +} + +_git () +{ + local _ret=1 + local cur cword prev + + cur=${words[CURRENT]} + prev=${words[CURRENT-1]} + let cword=CURRENT-1 + + if (( $+functions[__${service}_zsh_main] )); then + __${service}_zsh_main + else + emulate ksh -c __${service}_main + fi + + let _ret && _default && _ret=0 + return _ret +} + +_git diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh index 5ab488cd65..d6c61b2bde 100644 --- a/contrib/completion/git-prompt.sh +++ b/contrib/completion/git-prompt.sh @@ -3,20 +3,37 @@ # Copyright (C) 2006,2007 Shawn O. Pearce <spearce@spearce.org> # Distributed under the GNU General Public License, version 2.0. # -# This script allows you to see the current branch in your prompt. +# This script allows you to see repository status in your prompt. # # To enable: # # 1) Copy this file to somewhere (e.g. ~/.git-prompt.sh). # 2) Add the following line to your .bashrc/.zshrc: # source ~/.git-prompt.sh -# 3) Change your PS1 to also show the current branch: -# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' -# ZSH: PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ ' +# 3a) Change your PS1 to call __git_ps1 as +# command-substitution: +# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' +# ZSH: setopt PROMPT_SUBST ; PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ ' +# the optional argument will be used as format string. +# 3b) Alternatively, for a slightly faster prompt, __git_ps1 can +# be used for PROMPT_COMMAND in Bash or for precmd() in Zsh +# with two parameters, <pre> and <post>, which are strings +# you would put in $PS1 before and after the status string +# generated by the git-prompt machinery. e.g. +# Bash: PROMPT_COMMAND='__git_ps1 "\u@\h:\w" "\\\$ "' +# will show username, at-sign, host, colon, cwd, then +# various status string, followed by dollar and SP, as +# your prompt. +# ZSH: precmd () { __git_ps1 "%n" ":%~$ " "|%s" } +# will show username, pipe, then various status string, +# followed by colon, cwd, dollar and SP, as your prompt. +# Optionally, you can supply a third argument with a printf +# format string to finetune the output of the branch status # -# The argument to __git_ps1 will be displayed only if you are currently -# in a git repository. The %s token will be the name of the current -# branch. +# The repository status will be displayed only if you are currently in a +# git repository. The %s token is the placeholder for the shown status. +# +# The prompt status always includes the current branch name. # # In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty value, # unstaged (*) and staged (+) changes will be shown next to the branch @@ -30,7 +47,10 @@ # # If you would like to see if there're untracked files, then you can set # GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're untracked -# files, then a '%' will be shown next to the branch name. +# files, then a '%' will be shown next to the branch name. You can +# configure this per-repository with the bash.showUntrackedFiles +# variable, which defaults to true once GIT_PS1_SHOWUNTRACKEDFILES is +# enabled. # # If you would like to see the difference between HEAD and its upstream, # set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates you are behind, ">" @@ -58,30 +78,15 @@ # branch relative to newer tag or branch (master~4) # describe relative to older annotated tag (v1.6.3.1-13-gdd42c2f) # default exactly matching tag +# +# If you would like a colored hint about the current dirty state, set +# GIT_PS1_SHOWCOLORHINTS to a nonempty value. The colors are based on +# the colored output of "git status -sb" and are available only when +# using __git_ps1 for PROMPT_COMMAND or precmd. -# __gitdir accepts 0 or 1 arguments (i.e., location) -# returns location of .git repo -__gitdir () -{ - # Note: this function is duplicated in git-completion.bash - # When updating it, make sure you update the other one to match. - if [ -z "${1-}" ]; then - if [ -n "${__git_dir-}" ]; then - echo "$__git_dir" - elif [ -n "${GIT_DIR-}" ]; then - test -d "${GIT_DIR-}" || return 1 - echo "$GIT_DIR" - elif [ -d .git ]; then - echo .git - else - git rev-parse --git-dir 2>/dev/null - fi - elif [ -d "$1/.git" ]; then - echo "$1/.git" - else - echo "$1" - fi -} +# check whether printf supports -v +__git_printf_supports_v= +printf -v __git_printf_supports_v -- '%s' yes >/dev/null 2>&1 # stores the divergence from upstream in $p # used by GIT_PS1_SHOWUPSTREAM @@ -104,7 +109,7 @@ __git_ps1_show_upstream () fi ;; svn-remote.*.url) - svn_remote[ $((${#svn_remote[@]} + 1)) ]="$value" + svn_remote[$((${#svn_remote[@]} + 1))]="$value" svn_url_pattern+="\\|$value" upstream=svn+git # default upstream is SVN if available, else git ;; @@ -126,10 +131,11 @@ __git_ps1_show_upstream () svn*) # get the upstream from the "git-svn-id: ..." in a commit message # (git-svn uses essentially the same procedure internally) - local svn_upstream=($(git log --first-parent -1 \ + local -a svn_upstream + svn_upstream=($(git log --first-parent -1 \ --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null)) if [[ 0 -ne ${#svn_upstream[@]} ]]; then - svn_upstream=${svn_upstream[ ${#svn_upstream[@]} - 2 ]} + svn_upstream=${svn_upstream[${#svn_upstream[@]} - 2]} svn_upstream=${svn_upstream%@*} local n_stop="${#svn_remote[@]}" for ((n=1; n <= n_stop; n++)); do @@ -202,40 +208,161 @@ __git_ps1_show_upstream () } +# Helper function that is meant to be called from __git_ps1. It +# injects color codes into the appropriate gitstring variables used +# to build a gitstring. +__git_ps1_colorize_gitstring () +{ + if [[ -n ${ZSH_VERSION-} ]]; then + local c_red='%F{red}' + local c_green='%F{green}' + local c_lblue='%F{blue}' + local c_clear='%f' + else + # Using \[ and \] around colors is necessary to prevent + # issues with command line editing/browsing/completion! + local c_red='\[\e[31m\]' + local c_green='\[\e[32m\]' + local c_lblue='\[\e[1;34m\]' + local c_clear='\[\e[0m\]' + fi + local bad_color=$c_red + local ok_color=$c_green + local flags_color="$c_lblue" + + local branch_color="" + if [ $detached = no ]; then + branch_color="$ok_color" + else + branch_color="$bad_color" + fi + c="$branch_color$c" + + z="$c_clear$z" + if [ "$w" = "*" ]; then + w="$bad_color$w" + fi + if [ -n "$i" ]; then + i="$ok_color$i" + fi + if [ -n "$s" ]; then + s="$flags_color$s" + fi + if [ -n "$u" ]; then + u="$bad_color$u" + fi + r="$c_clear$r" +} # __git_ps1 accepts 0 or 1 arguments (i.e., format string) -# returns text to add to bash PS1 prompt (includes branch name) +# when called from PS1 using command substitution +# in this mode it prints text to add to bash PS1 prompt (includes branch name) +# +# __git_ps1 requires 2 or 3 arguments when called from PROMPT_COMMAND (pc) +# in that case it _sets_ PS1. The arguments are parts of a PS1 string. +# when two arguments are given, the first is prepended and the second appended +# to the state string when assigned to PS1. +# The optional third parameter will be used as printf format string to further +# customize the output of the git-status string. +# In this mode you can request colored hints using GIT_PS1_SHOWCOLORHINTS=true __git_ps1 () { - local g="$(__gitdir)" - if [ -n "$g" ]; then - local r="" - local b="" + local pcmode=no + local detached=no + local ps1pc_start='\u@\h:\w ' + local ps1pc_end='\$ ' + local printf_format=' (%s)' + + case "$#" in + 2|3) pcmode=yes + ps1pc_start="$1" + ps1pc_end="$2" + printf_format="${3:-$printf_format}" + ;; + 0|1) printf_format="${1:-$printf_format}" + ;; + *) return + ;; + esac + + local repo_info rev_parse_exit_code + repo_info="$(git rev-parse --git-dir --is-inside-git-dir \ + --is-bare-repository --is-inside-work-tree \ + --short HEAD 2>/dev/null)" + rev_parse_exit_code="$?" + + if [ -z "$repo_info" ]; then + if [ $pcmode = yes ]; then + #In PC mode PS1 always needs to be set + PS1="$ps1pc_start$ps1pc_end" + fi + return + fi + + local short_sha + if [ "$rev_parse_exit_code" = "0" ]; then + short_sha="${repo_info##*$'\n'}" + repo_info="${repo_info%$'\n'*}" + fi + local inside_worktree="${repo_info##*$'\n'}" + repo_info="${repo_info%$'\n'*}" + local bare_repo="${repo_info##*$'\n'}" + repo_info="${repo_info%$'\n'*}" + local inside_gitdir="${repo_info##*$'\n'}" + local g="${repo_info%$'\n'*}" + + local r="" + local b="" + local step="" + local total="" + if [ -d "$g/rebase-merge" ]; then + read b 2>/dev/null <"$g/rebase-merge/head-name" + read step 2>/dev/null <"$g/rebase-merge/msgnum" + read total 2>/dev/null <"$g/rebase-merge/end" if [ -f "$g/rebase-merge/interactive" ]; then r="|REBASE-i" - b="$(cat "$g/rebase-merge/head-name")" - elif [ -d "$g/rebase-merge" ]; then + else r="|REBASE-m" - b="$(cat "$g/rebase-merge/head-name")" + fi + else + if [ -d "$g/rebase-apply" ]; then + read step 2>/dev/null <"$g/rebase-apply/next" + read total 2>/dev/null <"$g/rebase-apply/last" + if [ -f "$g/rebase-apply/rebasing" ]; then + read b 2>/dev/null <"$g/rebase-apply/head-name" + r="|REBASE" + elif [ -f "$g/rebase-apply/applying" ]; then + r="|AM" + else + r="|AM/REBASE" + fi + elif [ -f "$g/MERGE_HEAD" ]; then + r="|MERGING" + elif [ -f "$g/CHERRY_PICK_HEAD" ]; then + r="|CHERRY-PICKING" + elif [ -f "$g/REVERT_HEAD" ]; then + r="|REVERTING" + elif [ -f "$g/BISECT_LOG" ]; then + r="|BISECTING" + fi + + if [ -n "$b" ]; then + : + elif [ -h "$g/HEAD" ]; then + # symlink symbolic ref + b="$(git symbolic-ref HEAD 2>/dev/null)" else - if [ -d "$g/rebase-apply" ]; then - if [ -f "$g/rebase-apply/rebasing" ]; then - r="|REBASE" - elif [ -f "$g/rebase-apply/applying" ]; then - r="|AM" - else - r="|AM/REBASE" + local head="" + if ! read head 2>/dev/null <"$g/HEAD"; then + if [ $pcmode = yes ]; then + PS1="$ps1pc_start$ps1pc_end" fi - elif [ -f "$g/MERGE_HEAD" ]; then - r="|MERGING" - elif [ -f "$g/CHERRY_PICK_HEAD" ]; then - r="|CHERRY-PICKING" - elif [ -f "$g/BISECT_LOG" ]; then - r="|BISECTING" + return fi - - b="$(git symbolic-ref HEAD 2>/dev/null)" || { - + # is it a symbolic ref? + b="${head#ref: }" + if [ "$head" = "$b" ]; then + detached=yes b="$( case "${GIT_PS1_DESCRIBE_STYLE-}" in (contains) @@ -248,52 +375,75 @@ __git_ps1 () git describe --tags --exact-match HEAD ;; esac 2>/dev/null)" || - b="$(cut -c1-7 "$g/HEAD" 2>/dev/null)..." || - b="unknown" + b="$short_sha..." b="($b)" - } + fi fi + fi + + if [ -n "$step" ] && [ -n "$total" ]; then + r="$r $step/$total" + fi - local w="" - local i="" - local s="" - local u="" - local c="" - local p="" + local w="" + local i="" + local s="" + local u="" + local c="" + local p="" - if [ "true" = "$(git rev-parse --is-inside-git-dir 2>/dev/null)" ]; then - if [ "true" = "$(git rev-parse --is-bare-repository 2>/dev/null)" ]; then - c="BARE:" + if [ "true" = "$inside_gitdir" ]; then + if [ "true" = "$bare_repo" ]; then + c="BARE:" + else + b="GIT_DIR!" + fi + elif [ "true" = "$inside_worktree" ]; then + if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ] && + [ "$(git config --bool bash.showDirtyState)" != "false" ] + then + git diff --no-ext-diff --quiet --exit-code || w="*" + if [ -n "$short_sha" ]; then + git diff-index --cached --quiet HEAD -- || i="+" else - b="GIT_DIR!" - fi - elif [ "true" = "$(git rev-parse --is-inside-work-tree 2>/dev/null)" ]; then - if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ]; then - if [ "$(git config --bool bash.showDirtyState)" != "false" ]; then - git diff --no-ext-diff --quiet --exit-code || w="*" - if git rev-parse --quiet --verify HEAD >/dev/null; then - git diff-index --cached --quiet HEAD -- || i="+" - else - i="#" - fi - fi - fi - if [ -n "${GIT_PS1_SHOWSTASHSTATE-}" ]; then - git rev-parse --verify refs/stash >/dev/null 2>&1 && s="$" + i="#" fi + fi + if [ -n "${GIT_PS1_SHOWSTASHSTATE-}" ] && + [ -r "$g/refs/stash" ]; then + s="$" + fi - if [ -n "${GIT_PS1_SHOWUNTRACKEDFILES-}" ]; then - if [ -n "$(git ls-files --others --exclude-standard)" ]; then - u="%" - fi - fi + if [ -n "${GIT_PS1_SHOWUNTRACKEDFILES-}" ] && + [ "$(git config --bool bash.showUntrackedFiles)" != "false" ] && + git ls-files --others --exclude-standard --error-unmatch -- '*' >/dev/null 2>/dev/null + then + u="%${ZSH_VERSION+%}" + fi - if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then - __git_ps1_show_upstream - fi + if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then + __git_ps1_show_upstream fi + fi + + local z="${GIT_PS1_STATESEPARATOR-" "}" + + # NO color option unless in PROMPT_COMMAND mode + if [ $pcmode = yes ] && [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then + __git_ps1_colorize_gitstring + fi - local f="$w$i$s$u" - printf -- "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r$p" + local f="$w$i$s$u" + local gitstring="$c${b##refs/heads/}${f:+$z$f}$r$p" + + if [ $pcmode = yes ]; then + if [ "${__git_printf_supports_v-}" != yes ]; then + gitstring=$(printf -- "$printf_format" "$gitstring") + else + printf -v gitstring -- "$printf_format" "$gitstring" + fi + PS1="$ps1pc_start$gitstring$ps1pc_end" + else + printf -- "$printf_format" "$gitstring" fi } |