diff options
Diffstat (limited to 'compat/mingw.h')
| -rw-r--r-- | compat/mingw.h | 217 |
1 files changed, 182 insertions, 35 deletions
diff --git a/compat/mingw.h b/compat/mingw.h index 61a652138a..5e499cfb71 100644 --- a/compat/mingw.h +++ b/compat/mingw.h @@ -32,7 +32,12 @@ typedef int socklen_t; #define WEXITSTATUS(x) ((x) & 0xff) #define WTERMSIG(x) SIGTERM +#ifndef EWOULDBLOCK #define EWOULDBLOCK EAGAIN +#endif +#ifndef ELOOP +#define ELOOP EMLINK +#endif #define SHUT_WR SD_SEND #define SIGHUP 1 @@ -46,8 +51,12 @@ typedef int socklen_t; #define F_SETFD 2 #define FD_CLOEXEC 0x1 +#ifndef EAFNOSUPPORT #define EAFNOSUPPORT WSAEAFNOSUPPORT +#endif +#ifndef ECONNABORTED #define ECONNABORTED WSAECONNABORTED +#endif struct passwd { char *pw_name; @@ -55,14 +64,11 @@ struct passwd { char *pw_dir; }; -extern char *getpass(const char *prompt); - typedef void (__cdecl *sig_handler_t)(int); struct sigaction { sig_handler_t sa_handler; unsigned sa_flags; }; -#define sigemptyset(x) (void)0 #define SA_RESTART 0 struct itimerval { @@ -109,15 +115,18 @@ static inline int fcntl(int fd, int cmd, ...) } /* bash cannot reliably detect negative return codes as failure */ #define exit(code) exit((code) & 0xff) +#define sigemptyset(x) (void)0 +static inline int sigaddset(sigset_t *set, int signum) +{ return 0; } +#define SIG_UNBLOCK 0 +static inline int sigprocmask(int how, const sigset_t *set, sigset_t *oldset) +{ return 0; } /* * simple adaptors */ -static inline int mingw_mkdir(const char *path, int mode) -{ - return mkdir(path); -} +int mingw_mkdir(const char *path, int mode); #define mkdir mingw_mkdir #define WNOHANG 1 @@ -176,8 +185,8 @@ int mingw_rmdir(const char *path); int mingw_open (const char *filename, int oflags, ...); #define open mingw_open -ssize_t mingw_write(int fd, const void *buf, size_t count); -#define write mingw_write +int mingw_fgetc(FILE *stream); +#define fgetc mingw_fgetc FILE *mingw_fopen (const char *filename, const char *otype); #define fopen mingw_fopen @@ -185,11 +194,30 @@ FILE *mingw_fopen (const char *filename, const char *otype); FILE *mingw_freopen (const char *filename, const char *otype, FILE *stream); #define freopen mingw_freopen +int mingw_fflush(FILE *stream); +#define fflush mingw_fflush + +int mingw_access(const char *filename, int mode); +#undef access +#define access mingw_access + +int mingw_chdir(const char *dirname); +#define chdir mingw_chdir + +int mingw_chmod(const char *filename, int mode); +#define chmod mingw_chmod + +char *mingw_mktemp(char *template); +#define mktemp mingw_mktemp + char *mingw_getcwd(char *pointer, int len); #define getcwd mingw_getcwd char *mingw_getenv(const char *name); #define getenv mingw_getenv +int mingw_putenv(const char *namevalue); +#define putenv mingw_putenv +#define unsetenv mingw_putenv int mingw_gethostname(char *host, int namelen); #define gethostname mingw_gethostname @@ -254,19 +282,35 @@ static inline int getrlimit(int resource, struct rlimit *rlp) return 0; } -/* Use mingw_lstat() instead of lstat()/stat() and - * mingw_fstat() instead of fstat() on Windows. +/* + * Use mingw specific stat()/lstat()/fstat() implementations on Windows. */ #define off_t off64_t #define lseek _lseeki64 -#ifndef ALREADY_DECLARED_STAT_FUNCS + +/* use struct stat with 64 bit st_size */ +#ifdef stat +#undef stat +#endif #define stat _stati64 int mingw_lstat(const char *file_name, struct stat *buf); int mingw_stat(const char *file_name, struct stat *buf); int mingw_fstat(int fd, struct stat *buf); +#ifdef fstat +#undef fstat +#endif #define fstat mingw_fstat +#ifdef lstat +#undef lstat +#endif #define lstat mingw_lstat -#define _stati64(x,y) mingw_stat(x,y) + +#ifndef _stati64 +# define _stati64(x,y) mingw_stat(x,y) +#elif defined (_USE_32BIT_TIME_T) +# define _stat32i64(x,y) mingw_stat(x,y) +#else +# define _stat64(x,y) mingw_stat(x,y) #endif int mingw_utime(const char *file_name, const struct utimbuf *times); @@ -287,16 +331,15 @@ static inline unsigned int git_ntohl(unsigned int x) sig_handler_t mingw_signal(int sig, sig_handler_t handler); #define signal mingw_signal +int mingw_raise(int sig); +#define raise mingw_raise + /* * ANSI emulation wrappers */ -int winansi_fputs(const char *str, FILE *stream); -int winansi_printf(const char *format, ...) __attribute__((format (printf, 1, 2))); -int winansi_fprintf(FILE *stream, const char *format, ...) __attribute__((format (printf, 2, 3))); -#define fputs winansi_fputs -#define printf(...) winansi_printf(__VA_ARGS__) -#define fprintf(...) winansi_fprintf(__VA_ARGS__) +void winansi_init(void); +HANDLE winansi_get_osfhandle(int fd); /* * git specific compatibility @@ -313,36 +356,140 @@ static inline char *mingw_find_last_dir_sep(const char *path) return ret; } #define find_last_dir_sep mingw_find_last_dir_sep +int mingw_offset_1st_component(const char *path); +#define offset_1st_component mingw_offset_1st_component #define PATH_SEP ';' #define PRIuMAX "I64u" +#define PRId64 "I64d" void mingw_open_html(const char *path); #define open_html mingw_open_html -/* - * helpers +void mingw_mark_as_git_dir(const char *dir); +#define mark_as_git_dir mingw_mark_as_git_dir + +/** + * Converts UTF-8 encoded string to UTF-16LE. + * + * To support repositories with legacy-encoded file names, invalid UTF-8 bytes + * 0xa0 - 0xff are converted to corresponding printable Unicode chars \u00a0 - + * \u00ff, and invalid UTF-8 bytes 0x80 - 0x9f (which would make non-printable + * Unicode) are converted to hex-code. + * + * Lead-bytes not followed by an appropriate number of trail-bytes, over-long + * encodings and 4-byte encodings > \u10ffff are detected as invalid UTF-8. + * + * Maximum space requirement for the target buffer is two wide chars per UTF-8 + * char (((strlen(utf) * 2) + 1) [* sizeof(wchar_t)]). + * + * The maximum space is needed only if the entire input string consists of + * invalid UTF-8 bytes in range 0x80-0x9f, as per the following table: + * + * | | UTF-8 | UTF-16 | + * Code point | UTF-8 sequence | bytes | words | ratio + * --------------+-------------------+-------+--------+------- + * 000000-00007f | 0-7f | 1 | 1 | 1 + * 000080-0007ff | c2-df + 80-bf | 2 | 1 | 0.5 + * 000800-00ffff | e0-ef + 2 * 80-bf | 3 | 1 | 0.33 + * 010000-10ffff | f0-f4 + 3 * 80-bf | 4 | 2 (a) | 0.5 + * invalid | 80-9f | 1 | 2 (b) | 2 + * invalid | a0-ff | 1 | 1 | 1 + * + * (a) encoded as UTF-16 surrogate pair + * (b) encoded as two hex digits + * + * Note that, while the UTF-8 encoding scheme can be extended to 5-byte, 6-byte + * or even indefinite-byte sequences, the largest valid code point \u10ffff + * encodes as only 4 UTF-8 bytes. + * + * Parameters: + * wcs: wide char target buffer + * utf: string to convert + * wcslen: size of target buffer (in wchar_t's) + * utflen: size of string to convert, or -1 if 0-terminated + * + * Returns: + * length of converted string (_wcslen(wcs)), or -1 on failure + * + * Errors: + * EINVAL: one of the input parameters is invalid (e.g. NULL) + * ERANGE: the output buffer is too small + */ +int xutftowcsn(wchar_t *wcs, const char *utf, size_t wcslen, int utflen); + +/** + * Simplified variant of xutftowcsn, assumes input string is \0-terminated. + */ +static inline int xutftowcs(wchar_t *wcs, const char *utf, size_t wcslen) +{ + return xutftowcsn(wcs, utf, wcslen, -1); +} + +/** + * Simplified file system specific variant of xutftowcsn, assumes output + * buffer size is MAX_PATH wide chars and input string is \0-terminated, + * fails with ENAMETOOLONG if input string is too long. */ +static inline int xutftowcs_path(wchar_t *wcs, const char *utf) +{ + int result = xutftowcsn(wcs, utf, MAX_PATH, -1); + if (result < 0 && errno == ERANGE) + errno = ENAMETOOLONG; + return result; +} -char **make_augmented_environ(const char *const *vars); -void free_environ(char **env); +/** + * Converts UTF-16LE encoded string to UTF-8. + * + * Maximum space requirement for the target buffer is three UTF-8 chars per + * wide char ((_wcslen(wcs) * 3) + 1). + * + * The maximum space is needed only if the entire input string consists of + * UTF-16 words in range 0x0800-0xd7ff or 0xe000-0xffff (i.e. \u0800-\uffff + * modulo surrogate pairs), as per the following table: + * + * | | UTF-16 | UTF-8 | + * Code point | UTF-16 sequence | words | bytes | ratio + * --------------+-----------------------+--------+-------+------- + * 000000-00007f | 0000-007f | 1 | 1 | 1 + * 000080-0007ff | 0080-07ff | 1 | 2 | 2 + * 000800-00ffff | 0800-d7ff / e000-ffff | 1 | 3 | 3 + * 010000-10ffff | d800-dbff + dc00-dfff | 2 | 4 | 2 + * + * Note that invalid code points > 10ffff cannot be represented in UTF-16. + * + * Parameters: + * utf: target buffer + * wcs: wide string to convert + * utflen: size of target buffer + * + * Returns: + * length of converted string, or -1 on failure + * + * Errors: + * EINVAL: one of the input parameters is invalid (e.g. NULL) + * ERANGE: the output buffer is too small + */ +int xwcstoutf(char *utf, const wchar_t *wcs, size_t utflen); + +/* + * A critical section used in the implementation of the spawn + * functions (mingw_spawnv[p]e()) and waitpid(). Intialised in + * the replacement main() macro below. + */ +extern CRITICAL_SECTION pinfo_cs; /* - * A replacement of main() that ensures that argv[0] has a path - * and that default fmode and std(in|out|err) are in binary mode + * A replacement of main() that adds win32 specific initialization. */ +void mingw_startup(); #define main(c,v) dummy_decl_mingw_main(); \ -static int mingw_main(); \ -int main(int argc, const char **argv) \ +static int mingw_main(c,v); \ +int main(int argc, char **argv) \ { \ - extern CRITICAL_SECTION pinfo_cs; \ - _fmode = _O_BINARY; \ - _setmode(_fileno(stdin), _O_BINARY); \ - _setmode(_fileno(stdout), _O_BINARY); \ - _setmode(_fileno(stderr), _O_BINARY); \ - argv[0] = xstrdup(_pgmptr); \ - InitializeCriticalSection(&pinfo_cs); \ - return mingw_main(argc, argv); \ + mingw_startup(); \ + return mingw_main(__argc, (void *)__argv); \ } \ static int mingw_main(c,v) |