diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 216 |
1 files changed, 172 insertions, 44 deletions
@@ -441,6 +441,49 @@ all:: # # When cross-compiling, define HOST_CPU as the canonical name of the CPU on # which the built Git will run (for instance "x86_64"). +# +# Define RUNTIME_PREFIX to configure Git to resolve its ancillary tooling and +# support files relative to the location of the runtime binary, rather than +# hard-coding them into the binary. Git installations built with RUNTIME_PREFIX +# can be moved to arbitrary filesystem locations. RUNTIME_PREFIX also causes +# Perl scripts to use a modified entry point header allowing them to resolve +# support files at runtime. +# +# When using RUNTIME_PREFIX, define HAVE_BSD_KERN_PROC_SYSCTL if your platform +# supports the KERN_PROC BSD sysctl function. +# +# When using RUNTIME_PREFIX, define PROCFS_EXECUTABLE_PATH if your platform +# mounts a "procfs" filesystem capable of resolving the path of the current +# executable. If defined, this must be the canonical path for the "procfs" +# current executable path. +# +# When using RUNTIME_PREFIX, define HAVE_NS_GET_EXECUTABLE_PATH if your platform +# supports calling _NSGetExecutablePath to retrieve the path of the running +# executable. +# +# When using RUNTIME_PREFIX, define HAVE_WPGMPTR if your platform offers +# the global variable _wpgmptr containing the absolute path of the current +# executable (this is the case on Windows). +# +# Define DEVELOPER to enable more compiler warnings. Compiler version +# and family are auto detected, but could be overridden by defining +# COMPILER_FEATURES (see config.mak.dev) +# +# When DEVELOPER is set, DEVOPTS can be used to control compiler +# options. This variable contains keywords separated by +# whitespace. The following keywords are are recognized: +# +# no-error: +# +# suppresses the -Werror that implicitly comes with +# DEVELOPER=1. Useful for getting the full set of errors +# without immediately dying, or for logging them. +# +# extra-all: +# +# The DEVELOPER mode enables -Wextra with a few exceptions. By +# setting this flag the exceptions are removed, and all of +# -Wextra is used. GIT-VERSION-FILE: FORCE @$(SHELL_PATH) ./GIT-VERSION-GEN @@ -449,15 +492,6 @@ GIT-VERSION-FILE: FORCE # CFLAGS and LDFLAGS are for the users to override from the command line. CFLAGS = -g -O2 -Wall -DEVELOPER_CFLAGS = -Werror \ - -Wdeclaration-after-statement \ - -Wno-format-zero-length \ - -Wold-style-definition \ - -Woverflow \ - -Wpointer-arith \ - -Wstrict-prototypes \ - -Wunused \ - -Wvla LDFLAGS = ALL_CFLAGS = $(CPPFLAGS) $(CFLAGS) ALL_LDFLAGS = $(LDFLAGS) @@ -478,6 +512,8 @@ ARFLAGS = rcs # mandir # infodir # htmldir +# localedir +# perllibdir # This can help installing the suite in a relocatable way. prefix = $(HOME) @@ -502,7 +538,9 @@ bindir_relative = $(patsubst $(prefix)/%,%,$(bindir)) mandir_relative = $(patsubst $(prefix)/%,%,$(mandir)) infodir_relative = $(patsubst $(prefix)/%,%,$(infodir)) gitexecdir_relative = $(patsubst $(prefix)/%,%,$(gitexecdir)) +localedir_relative = $(patsubst $(prefix)/%,%,$(localedir)) htmldir_relative = $(patsubst $(prefix)/%,%,$(htmldir)) +perllibdir_relative = $(patsubst $(prefix)/%,%,$(perllibdir)) export prefix bindir sharedir sysconfdir gitwebdir perllibdir localedir @@ -582,6 +620,7 @@ SCRIPT_LIB += git-mergetool--lib SCRIPT_LIB += git-parse-remote SCRIPT_LIB += git-rebase--am SCRIPT_LIB += git-rebase--interactive +SCRIPT_LIB += git-rebase--preserve-merges SCRIPT_LIB += git-rebase--merge SCRIPT_LIB += git-sh-setup SCRIPT_LIB += git-sh-i18n @@ -651,8 +690,6 @@ PROGRAM_OBJS += http-backend.o PROGRAM_OBJS += imap-send.o PROGRAM_OBJS += sh-i18n--envsubst.o PROGRAM_OBJS += shell.o -PROGRAM_OBJS += show-index.o -PROGRAM_OBJS += upload-pack.o PROGRAM_OBJS += remote-testsvn.o # Binary suffix, set to .exe for Windows builds @@ -701,6 +738,7 @@ TEST_PROGRAMS_NEED_X += test-dump-untracked-cache TEST_PROGRAMS_NEED_X += test-fake-ssh TEST_PROGRAMS_NEED_X += test-line-buffer TEST_PROGRAMS_NEED_X += test-parse-options +TEST_PROGRAMS_NEED_X += test-pkt-line TEST_PROGRAMS_NEED_X += test-svn-fe TEST_PROGRAMS_NEED_X += test-tool @@ -757,7 +795,7 @@ LIB_FILE = libgit.a XDIFF_LIB = xdiff/lib.a VCSSVN_LIB = vcs-svn/lib.a -GENERATED_H += common-cmds.h +GENERATED_H += command-list.h LIB_H = $(shell $(FIND) . \ -name .git -prune -o \ @@ -789,6 +827,7 @@ LIB_OBJS += color.o LIB_OBJS += column.o LIB_OBJS += combine-diff.o LIB_OBJS += commit.o +LIB_OBJS += commit-graph.o LIB_OBJS += compat/obstack.o LIB_OBJS += compat/terminal.o LIB_OBJS += config.o @@ -842,6 +881,7 @@ LIB_OBJS += list-objects-filter-options.o LIB_OBJS += ll-merge.o LIB_OBJS += lockfile.o LIB_OBJS += log-tree.o +LIB_OBJS += ls-refs.o LIB_OBJS += mailinfo.o LIB_OBJS += mailmap.o LIB_OBJS += match-trees.o @@ -888,6 +928,7 @@ LIB_OBJS += refs/files-backend.o LIB_OBJS += refs/iterator.o LIB_OBJS += refs/packed-backend.o LIB_OBJS += refs/ref-cache.o +LIB_OBJS += refspec.o LIB_OBJS += ref-filter.o LIB_OBJS += remote.o LIB_OBJS += replace-object.o @@ -898,6 +939,7 @@ LIB_OBJS += revision.o LIB_OBJS += run-command.o LIB_OBJS += send-pack.o LIB_OBJS += sequencer.o +LIB_OBJS += serve.o LIB_OBJS += server-info.o LIB_OBJS += setup.o LIB_OBJS += sha1-array.o @@ -926,6 +968,7 @@ LIB_OBJS += tree-diff.o LIB_OBJS += tree.o LIB_OBJS += tree-walk.o LIB_OBJS += unpack-trees.o +LIB_OBJS += upload-pack.o LIB_OBJS += url.o LIB_OBJS += urlmatch.o LIB_OBJS += usage.o @@ -965,6 +1008,7 @@ BUILTIN_OBJS += builtin/clone.o BUILTIN_OBJS += builtin/column.o BUILTIN_OBJS += builtin/commit-tree.o BUILTIN_OBJS += builtin/commit.o +BUILTIN_OBJS += builtin/commit-graph.o BUILTIN_OBJS += builtin/config.o BUILTIN_OBJS += builtin/count-objects.o BUILTIN_OBJS += builtin/credential.o @@ -1030,8 +1074,10 @@ BUILTIN_OBJS += builtin/rev-parse.o BUILTIN_OBJS += builtin/revert.o BUILTIN_OBJS += builtin/rm.o BUILTIN_OBJS += builtin/send-pack.o +BUILTIN_OBJS += builtin/serve.o BUILTIN_OBJS += builtin/shortlog.o BUILTIN_OBJS += builtin/show-branch.o +BUILTIN_OBJS += builtin/show-index.o BUILTIN_OBJS += builtin/show-ref.o BUILTIN_OBJS += builtin/stripspace.o BUILTIN_OBJS += builtin/submodule--helper.o @@ -1043,6 +1089,7 @@ BUILTIN_OBJS += builtin/update-index.o BUILTIN_OBJS += builtin/update-ref.o BUILTIN_OBJS += builtin/update-server-info.o BUILTIN_OBJS += builtin/upload-archive.o +BUILTIN_OBJS += builtin/upload-pack.o BUILTIN_OBJS += builtin/var.o BUILTIN_OBJS += builtin/verify-commit.o BUILTIN_OBJS += builtin/verify-pack.o @@ -1064,7 +1111,7 @@ include config.mak.uname -include config.mak ifdef DEVELOPER -CFLAGS += $(DEVELOPER_CFLAGS) +include config.mak.dev endif comma := , @@ -1305,17 +1352,19 @@ ifdef APPLE_COMMON_CRYPTO LIB_4_CRYPTO += -framework Security -framework CoreFoundation endif endif -ifdef NEEDS_LIBICONV - ifdef ICONVDIR - BASIC_CFLAGS += -I$(ICONVDIR)/include - ICONV_LINK = -L$(ICONVDIR)/$(lib) $(CC_LD_DYNPATH)$(ICONVDIR)/$(lib) - else - ICONV_LINK = - endif - ifdef NEEDS_LIBINTL_BEFORE_LIBICONV - ICONV_LINK += -lintl +ifndef NO_ICONV + ifdef NEEDS_LIBICONV + ifdef ICONVDIR + BASIC_CFLAGS += -I$(ICONVDIR)/include + ICONV_LINK = -L$(ICONVDIR)/$(lib) $(CC_LD_DYNPATH)$(ICONVDIR)/$(lib) + else + ICONV_LINK = + endif + ifdef NEEDS_LIBINTL_BEFORE_LIBICONV + ICONV_LINK += -lintl + endif + EXTLIBS += $(ICONV_LINK) -liconv endif - EXTLIBS += $(ICONV_LINK) -liconv endif ifdef NEEDS_LIBGEN EXTLIBS += -lgen @@ -1665,10 +1714,27 @@ ifdef HAVE_BSD_SYSCTL BASIC_CFLAGS += -DHAVE_BSD_SYSCTL endif +ifdef HAVE_BSD_KERN_PROC_SYSCTL + BASIC_CFLAGS += -DHAVE_BSD_KERN_PROC_SYSCTL +endif + ifdef HAVE_GETDELIM BASIC_CFLAGS += -DHAVE_GETDELIM endif +ifneq ($(PROCFS_EXECUTABLE_PATH),) + procfs_executable_path_SQ = $(subst ','\'',$(PROCFS_EXECUTABLE_PATH)) + BASIC_CFLAGS += '-DPROCFS_EXECUTABLE_PATH="$(procfs_executable_path_SQ)"' +endif + +ifdef HAVE_NS_GET_EXECUTABLE_PATH + BASIC_CFLAGS += -DHAVE_NS_GET_EXECUTABLE_PATH +endif + +ifdef HAVE_WPGMPTR + BASIC_CFLAGS += -DHAVE_WPGMPTR +endif + ifeq ($(TCLTK_PATH),) NO_TCLTK = NoThanks endif @@ -1753,11 +1819,13 @@ mandir_relative_SQ = $(subst ','\'',$(mandir_relative)) infodir_relative_SQ = $(subst ','\'',$(infodir_relative)) perllibdir_SQ = $(subst ','\'',$(perllibdir)) localedir_SQ = $(subst ','\'',$(localedir)) +localedir_relative_SQ = $(subst ','\'',$(localedir_relative)) gitexecdir_SQ = $(subst ','\'',$(gitexecdir)) gitexecdir_relative_SQ = $(subst ','\'',$(gitexecdir_relative)) template_dir_SQ = $(subst ','\'',$(template_dir)) htmldir_relative_SQ = $(subst ','\'',$(htmldir_relative)) prefix_SQ = $(subst ','\'',$(prefix)) +perllibdir_relative_SQ = $(subst ','\'',$(perllibdir_relative)) gitwebdir_SQ = $(subst ','\'',$(gitwebdir)) SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) @@ -1768,6 +1836,31 @@ TCLTK_PATH_SQ = $(subst ','\'',$(TCLTK_PATH)) DIFF_SQ = $(subst ','\'',$(DIFF)) PERLLIB_EXTRA_SQ = $(subst ','\'',$(PERLLIB_EXTRA)) +# RUNTIME_PREFIX's resolution logic requires resource paths to be expressed +# relative to each other and share an installation path. +# +# This is a dependency in: +# - Git's binary RUNTIME_PREFIX logic in (see "exec_cmd.c"). +# - The runtime prefix Perl header (see +# "perl/header_templates/runtime_prefix.template.pl"). +ifdef RUNTIME_PREFIX + +ifneq ($(filter /%,$(firstword $(gitexecdir_relative))),) +$(error RUNTIME_PREFIX requires a relative gitexecdir, not: $(gitexecdir)) +endif + +ifneq ($(filter /%,$(firstword $(localedir_relative))),) +$(error RUNTIME_PREFIX requires a relative localedir, not: $(localedir)) +endif + +ifndef NO_PERL +ifneq ($(filter /%,$(firstword $(perllibdir_relative))),) +$(error RUNTIME_PREFIX requires a relative perllibdir, not: $(perllibdir)) +endif +endif + +endif + # We must filter out any object files from $(GITLIBS), # as it is typically used like: # @@ -1916,9 +2009,9 @@ git$X: git.o GIT-LDFLAGS $(BUILTIN_OBJS) $(GITLIBS) $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) \ $(filter %.o,$^) $(LIBS) -help.sp help.s help.o: common-cmds.h +help.sp help.s help.o: command-list.h -builtin/help.sp builtin/help.s builtin/help.o: common-cmds.h GIT-PREFIX +builtin/help.sp builtin/help.s builtin/help.o: command-list.h GIT-PREFIX builtin/help.sp builtin/help.s builtin/help.o: EXTRA_CPPFLAGS = \ '-DGIT_HTML_PATH="$(htmldir_relative_SQ)"' \ '-DGIT_MAN_PATH="$(mandir_relative_SQ)"' \ @@ -1937,9 +2030,9 @@ $(BUILT_INS): git$X ln -s $< $@ 2>/dev/null || \ cp $< $@ -common-cmds.h: generate-cmdlist.sh command-list.txt +command-list.h: generate-cmdlist.sh command-list.txt -common-cmds.h: $(wildcard Documentation/git-*.txt) +command-list.h: $(wildcard Documentation/git*.txt) $(QUIET_GEN)$(SHELL_PATH) ./generate-cmdlist.sh command-list.txt >$@+ && mv $@+ $@ SCRIPT_DEFINES = $(SHELL_PATH_SQ):$(DIFF_SQ):$(GIT_VERSION):\ @@ -1988,27 +2081,44 @@ git.res: git.rc GIT-VERSION-FILE # This makes sure we depend on the NO_PERL setting itself. $(SCRIPT_PERL_GEN): GIT-BUILD-OPTIONS -ifndef NO_PERL -$(SCRIPT_PERL_GEN): +# Used for substitution in Perl modules. Disabled when using RUNTIME_PREFIX +# since the locale directory is injected. +perl_localedir_SQ = $(localedir_SQ) +ifndef NO_PERL +PERL_HEADER_TEMPLATE = perl/header_templates/fixed_prefix.template.pl PERL_DEFINES = $(PERL_PATH_SQ):$(PERLLIB_EXTRA_SQ):$(perllibdir_SQ) -$(SCRIPT_PERL_GEN): % : %.perl GIT-PERL-DEFINES GIT-VERSION-FILE + +PERL_DEFINES := $(PERL_PATH_SQ) $(PERLLIB_EXTRA_SQ) $(perllibdir_SQ) +PERL_DEFINES += $(RUNTIME_PREFIX) + +# Support Perl runtime prefix. In this mode, a different header is installed +# into Perl scripts. +ifdef RUNTIME_PREFIX + +PERL_HEADER_TEMPLATE = perl/header_templates/runtime_prefix.template.pl + +# Don't export a fixed $(localedir) path; it will be resolved by the Perl header +# at runtime. +perl_localedir_SQ = + +endif + +PERL_DEFINES += $(gitexecdir) $(perllibdir) $(localedir) + +$(SCRIPT_PERL_GEN): % : %.perl GIT-PERL-DEFINES GIT-PERL-HEADER GIT-VERSION-FILE $(QUIET_GEN)$(RM) $@ $@+ && \ - INSTLIBDIR='$(perllibdir_SQ)' && \ - INSTLIBDIR_EXTRA='$(PERLLIB_EXTRA_SQ)' && \ - INSTLIBDIR="$$INSTLIBDIR$${INSTLIBDIR_EXTRA:+:$$INSTLIBDIR_EXTRA}" && \ sed -e '1{' \ -e ' s|#!.*perl|#!$(PERL_PATH_SQ)|' \ - -e ' h' \ - -e ' s=.*=use lib (split(/$(pathsep)/, $$ENV{GITPERLLIB} || "'"$$INSTLIBDIR"'"));=' \ - -e ' H' \ - -e ' x' \ + -e ' r GIT-PERL-HEADER' \ + -e ' G' \ -e '}' \ -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \ $< >$@+ && \ chmod +x $@+ && \ mv $@+ $@ +PERL_DEFINES := $(subst $(space),:,$(PERL_DEFINES)) GIT-PERL-DEFINES: FORCE @FLAGS='$(PERL_DEFINES)'; \ if test x"$$FLAGS" != x"`cat $@ 2>/dev/null`" ; then \ @@ -2016,6 +2126,22 @@ GIT-PERL-DEFINES: FORCE echo "$$FLAGS" >$@; \ fi +GIT-PERL-HEADER: $(PERL_HEADER_TEMPLATE) GIT-PERL-DEFINES Makefile + $(QUIET_GEN)$(RM) $@ && \ + INSTLIBDIR='$(perllibdir_SQ)' && \ + INSTLIBDIR_EXTRA='$(PERLLIB_EXTRA_SQ)' && \ + INSTLIBDIR="$$INSTLIBDIR$${INSTLIBDIR_EXTRA:+:$$INSTLIBDIR_EXTRA}" && \ + sed -e 's=@@PATHSEP@@=$(pathsep)=g' \ + -e "s=@@INSTLIBDIR@@=$$INSTLIBDIR=g" \ + -e 's=@@PERLLIBDIR_REL@@=$(perllibdir_relative_SQ)=g' \ + -e 's=@@GITEXECDIR_REL@@=$(gitexecdir_relative_SQ)=g' \ + -e 's=@@LOCALEDIR_REL@@=$(localedir_relative_SQ)=g' \ + $< >$@+ && \ + mv $@+ $@ + +.PHONY: perllibdir +perllibdir: + @echo '$(perllibdir_SQ)' .PHONY: gitweb gitweb: @@ -2150,7 +2276,7 @@ else # Dependencies on header files, for platforms that do not support # the gcc -MMD option. # -# Dependencies on automatically generated headers such as common-cmds.h +# Dependencies on automatically generated headers such as command-list.h # should _not_ be included here, since they are necessary even when # building an object for the first time. @@ -2160,8 +2286,9 @@ endif exec-cmd.sp exec-cmd.s exec-cmd.o: GIT-PREFIX exec-cmd.sp exec-cmd.s exec-cmd.o: EXTRA_CPPFLAGS = \ '-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' \ + '-DGIT_LOCALE_PATH="$(localedir_relative_SQ)"' \ '-DBINDIR="$(bindir_relative_SQ)"' \ - '-DPREFIX="$(prefix_SQ)"' + '-DFALLBACK_RUNTIME_PREFIX="$(prefix_SQ)"' builtin/init-db.sp builtin/init-db.s builtin/init-db.o: GIT-PREFIX builtin/init-db.sp builtin/init-db.s builtin/init-db.o: EXTRA_CPPFLAGS = \ @@ -2177,7 +2304,7 @@ attr.sp attr.s attr.o: EXTRA_CPPFLAGS = \ gettext.sp gettext.s gettext.o: GIT-PREFIX gettext.sp gettext.s gettext.o: EXTRA_CPPFLAGS = \ - -DGIT_LOCALE_PATH='"$(localedir_SQ)"' + -DGIT_LOCALE_PATH='"$(localedir_relative_SQ)"' http-push.sp http.sp http-walker.sp remote-curl.sp imap-send.sp: SPARSE_FLAGS += \ -DCURL_DISABLE_TYPECHECK @@ -2271,6 +2398,7 @@ LOCALIZED_C = $(C_OBJ:o=c) $(LIB_H) $(GENERATED_H) LOCALIZED_SH = $(SCRIPT_SH) LOCALIZED_SH += git-parse-remote.sh LOCALIZED_SH += git-rebase--interactive.sh +LOCALIZED_SH += git-rebase--preserve-merges.sh LOCALIZED_SH += git-sh-setup.sh LOCALIZED_PERL = $(SCRIPT_PERL) @@ -2337,7 +2465,7 @@ endif perl/build/lib/%.pm: perl/%.pm $(QUIET_GEN)mkdir -p $(dir $@) && \ - sed -e 's|@@LOCALEDIR@@|$(localedir_SQ)|g' \ + sed -e 's|@@LOCALEDIR@@|$(perl_localedir_SQ)|g' \ -e 's|@@NO_PERL_CPAN_FALLBACKS@@|$(NO_PERL_CPAN_FALLBACKS_SQ)|g' \ < $< > $@ @@ -2529,7 +2657,7 @@ sparse: $(SP_OBJ) style: git clang-format --style file --diff --extensions c,h -check: common-cmds.h +check: command-list.h @if sparse; \ then \ echo >&2 "Use 'make sparse' instead"; \ @@ -2777,7 +2905,7 @@ clean: profile-clean coverage-clean $(RM) $(TEST_PROGRAMS) $(NO_INSTALL) $(RM) -r bin-wrappers $(dep_dirs) $(RM) -r po/build/ - $(RM) *.pyc *.pyo */*.pyc */*.pyo common-cmds.h $(ETAGS_TARGET) tags cscope* + $(RM) *.pyc *.pyo */*.pyc */*.pyo command-list.h $(ETAGS_TARGET) tags cscope* $(RM) -r $(GIT_TARNAME) .doc-tmp-dir $(RM) $(GIT_TARNAME).tar.gz git-core_$(GIT_VERSION)-*.tar.gz $(RM) $(htmldocs).tar.gz $(manpages).tar.gz @@ -2795,7 +2923,7 @@ ifndef NO_TCLTK endif $(RM) GIT-VERSION-FILE GIT-CFLAGS GIT-LDFLAGS GIT-BUILD-OPTIONS $(RM) GIT-USER-AGENT GIT-PREFIX - $(RM) GIT-SCRIPT-DEFINES GIT-PERL-DEFINES GIT-PYTHON-VARS + $(RM) GIT-SCRIPT-DEFINES GIT-PERL-DEFINES GIT-PERL-HEADER GIT-PYTHON-VARS .PHONY: all install profile-clean clean strip .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell |