diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/Makefile | 2 | ||||
| -rw-r--r-- | Documentation/gitworkflows.txt | 364 |
2 files changed, 365 insertions, 1 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index ded0e40b97..e33ddcb250 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -6,7 +6,7 @@ MAN5_TXT=gitattributes.txt gitignore.txt gitmodules.txt githooks.txt \ gitrepository-layout.txt MAN7_TXT=gitcli.txt gittutorial.txt gittutorial-2.txt \ gitcvs-migration.txt gitcore-tutorial.txt gitglossary.txt \ - gitdiffcore.txt + gitdiffcore.txt gitworkflows.txt MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt new file mode 100644 index 0000000000..7fe9f7295d --- /dev/null +++ b/Documentation/gitworkflows.txt @@ -0,0 +1,364 @@ +gitworkflows(7) +=============== + +NAME +---- +gitworkflows - An overview of recommended workflows with git + +SYNOPSIS +-------- +git * + + +DESCRIPTION +----------- + +This document attempts to write down and motivate some of the workflow +elements used for `git.git` itself. Many ideas apply in general, +though the full workflow is rarely required for smaller projects with +fewer people involved. + +We formulate a set of 'rules' for quick reference, while the prose +tries to motivate each of them. Do not always take them literally; +you should value good reasons for your actions higher than manpages +such as this one. + + +SEPARATE CHANGES +---------------- + +As a general rule, you should try to split your changes into small +logical steps, and commit each of them. They should be consistent, +working independently of any later commits, pass the test suite, etc. +This makes the review process much easier, and the history much more +useful for later inspection and analysis, for example with +linkgit:git-blame[1] and linkgit:git-bisect[1]. + +To achieve this, try to split your work into small steps from the very +beginning. It is always easier to squash a few commits together than +to split one big commit into several. Don't be afraid of making too +small or imperfect steps along the way. You can always go back later +and edit the commits with `git rebase \--interactive` before you +publish them. You can use `git stash save \--keep-index` to run the +test suite independent of other uncommitted changes; see the EXAMPLES +section of linkgit:git-stash[1]. + + +MANAGING BRANCHES +----------------- + +There are two main tools that can be used to include changes from one +branch on another: linkgit:git-merge[1] and +linkgit:git-cherry-pick[1]. + +Merges have many advantages, so we try to solve as many problems as +possible with merges alone. Cherry-picking is still occasionally +useful; see "Merging upwards" below for an example. + +Most importantly, merging works at the branch level, while +cherry-picking works at the commit level. This means that a merge can +carry over the changes from 1, 10, or 1000 commits with equal ease, +which in turn means the workflow scales much better to a large number +of contributors (and contributions). Merges are also easier to +understand because a merge commit is a "promise" that all changes from +all its parents are now included. + +There is a tradeoff of course: merges require a more careful branch +management. The following subsections discuss the important points. + + +Graduation +~~~~~~~~~~ + +As a given feature goes from experimental to stable, it also +"graduates" between the corresponding branches of the software. +`git.git` uses the following 'integration branches': + +* 'maint' tracks the commits that should go into the next "maintenance + release", i.e., update of the last released stable version; + +* 'master' tracks the commits that should go into the next release; + +* 'next' is intended as a testing branch for topics being tested for + stability for master. + +There is a fourth official branch that is used slightly differently: + +* 'pu' (proposed updates) is an integration branch for things that are + not quite ready for inclusion yet (see "Integration Branches" + below). + +Each of the four branches is usually a direct descendant of the one +above it. + +Conceptually, the feature enters at an unstable branch (usually 'next' +or 'pu'), and "graduates" to 'master' for the next release once it is +considered stable enough. + + +Merging upwards +~~~~~~~~~~~~~~~ + +The "downwards graduation" discussed above cannot be done by actually +merging downwards, however, since that would merge 'all' changes on +the unstable branch into the stable one. Hence the following: + +.Merge upwards +[caption="Rule: "] +===================================== +Always commit your fixes to the oldest supported branch that require +them. Then (periodically) merge the integration branches upwards into each +other. +===================================== + +This gives a very controlled flow of fixes. If you notice that you +have applied a fix to e.g. 'master' that is also required in 'maint', +you will need to cherry-pick it (using linkgit:git-cherry-pick[1]) +downwards. This will happen a few times and is nothing to worry about +unless you do it very frequently. + + +Topic branches +~~~~~~~~~~~~~~ + +Any nontrivial feature will require several patches to implement, and +may get extra bugfixes or improvements during its lifetime. + +Committing everything directly on the integration branches leads to many +problems: Bad commits cannot be undone, so they must be reverted one +by one, which creates confusing histories and further error potential +when you forget to revert part of a group of changes. Working in +parallel mixes up the changes, creating further confusion. + +Use of "topic branches" solves these problems. The name is pretty +self explanatory, with a caveat that comes from the "merge upwards" +rule above: + +.Topic branches +[caption="Rule: "] +===================================== +Make a side branch for every topic (feature, bugfix, ...). Fork it off +at the oldest integration branch that you will eventually want to merge it +into. +===================================== + +Many things can then be done very naturally: + +* To get the feature/bugfix into an integration branch, simply merge + it. If the topic has evolved further in the meantime, merge again. + (Note that you do not necessarily have to merge it to the oldest + integration branch first. For example, you can first merge a bugfix + to 'next', give it some testing time, and merge to 'maint' when you + know it is stable.) + +* If you find you need new features from the branch 'other' to continue + working on your topic, merge 'other' to 'topic'. (However, do not + do this "just habitually", see below.) + +* If you find you forked off the wrong branch and want to move it + "back in time", use linkgit:git-rebase[1]. + +Note that the last point clashes with the other two: a topic that has +been merged elsewhere should not be rebased. See the section on +RECOVERING FROM UPSTREAM REBASE in linkgit:git-rebase[1]. + +We should point out that "habitually" (regularly for no real reason) +merging an integration branch into your topics -- and by extension, +merging anything upstream into anything downstream on a regular basis +-- is frowned upon: + +.Merge to downstream only at well-defined points +[caption="Rule: "] +===================================== +Do not merge to downstream except with a good reason: upstream API +changes affect your branch; your branch no longer merges to upstream +cleanly; etc. +===================================== + +Otherwise, the topic that was merged to suddenly contains more than a +single (well-separated) change. The many resulting small merges will +greatly clutter up history. Anyone who later investigates the history +of a file will have to find out whether that merge affected the topic +in development. An upstream might even inadvertently be merged into a +"more stable" branch. And so on. + + +Throw-away integration +~~~~~~~~~~~~~~~~~~~~~~ + +If you followed the last paragraph, you will now have many small topic +branches, and occasionally wonder how they interact. Perhaps the +result of merging them does not even work? But on the other hand, we +want to avoid merging them anywhere "stable" because such merges +cannot easily be undone. + +The solution, of course, is to make a merge that we can undo: merge +into a throw-away branch. + +.Throw-away integration branches +[caption="Rule: "] +===================================== +To test the interaction of several topics, merge them into a +throw-away branch. You must never base any work on such a branch! +===================================== + +If you make it (very) clear that this branch is going to be deleted +right after the testing, you can even publish this branch, for example +to give the testers a chance to work with it, or other developers a +chance to see if their in-progress work will be compatible. `git.git` +has such an official throw-away integration branch called 'pu'. + + +DISTRIBUTED WORKFLOWS +--------------------- + +After the last section, you should know how to manage topics. In +general, you will not be the only person working on the project, so +you will have to share your work. + +Roughly speaking, there are two important workflows: merge and patch. +The important difference is that the merge workflow can propagate full +history, including merges, while patches cannot. Both workflows can +be used in parallel: in `git.git`, only subsystem maintainers use +the merge workflow, while everyone else sends patches. + +Note that the maintainer(s) may impose restrictions, such as +"Signed-off-by" requirements, that all commits/patches submitted for +inclusion must adhere to. Consult your project's documentation for +more information. + + +Merge workflow +~~~~~~~~~~~~~~ + +The merge workflow works by copying branches between upstream and +downstream. Upstream can merge contributions into the official +history; downstream base their work on the official history. + +There are three main tools that can be used for this: + +* linkgit:git-push[1] copies your branches to a remote repository, + usually to one that can be read by all involved parties; + +* linkgit:git-fetch[1] that copies remote branches to your repository; + and + +* linkgit:git-pull[1] that does fetch and merge in one go. + +Note the last point. Do 'not' use 'git-pull' unless you actually want +to merge the remote branch. + +Getting changes out is easy: + +.Push/pull: Publishing branches/topics +[caption="Recipe: "] +===================================== +`git push <remote> <branch>` and tell everyone where they can fetch +from. +===================================== + +You will still have to tell people by other means, such as mail. (Git +provides the linkgit:request-pull[1] to send preformatted pull +requests to upstream maintainers to simplify this task.) + +If you just want to get the newest copies of the integration branches, +staying up to date is easy too: + +.Push/pull: Staying up to date +[caption="Recipe: "] +===================================== +Use `git fetch <remote>` or `git remote update` to stay up to date. +===================================== + +Then simply fork your topic branches from the stable remotes as +explained earlier. + +If you are a maintainer and would like to merge other people's topic +branches to the integration branches, they will typically send a +request to do so by mail. Such a request looks like + +------------------------------------- +Please pull from + <url> <branch> +------------------------------------- + +In that case, 'git-pull' can do the fetch and merge in one go, as +follows. + +.Push/pull: Merging remote topics +[caption="Recipe: "] +===================================== +`git pull <url> <branch>` +===================================== + +Occasionally, the maintainer may get merge conflicts when he tries to +pull changes from downstream. In this case, he can ask downstream to +do the merge and resolve the conflicts themselves (perhaps they will +know better how to resolve them). It is one of the rare cases where +downstream 'should' merge from upstream. + + +Patch workflow +~~~~~~~~~~~~~~ + +If you are a contributor that sends changes upstream in the form of +emails, you should use topic branches as usual (see above). Then use +linkgit:git-format-patch[1] to generate the corresponding emails +(highly recommended over manually formatting them because it makes the +maintainer's life easier). + +.format-patch/am: Publishing branches/topics +[caption="Recipe: "] +===================================== +* `git format-patch -M upstream..topic` to turn them into preformatted + patch files +* `git send-email --to=<recipient> <patches>` +===================================== + +See the linkgit:git-format-patch[1] and linkgit:git-send-email[1] +manpages for further usage notes. + +If the maintainer tells you that your patch no longer applies to the +current upstream, you will have to rebase your topic (you cannot use a +merge because you cannot format-patch merges): + +.format-patch/am: Keeping topics up to date +[caption="Recipe: "] +===================================== +`git pull --rebase <url> <branch>` +===================================== + +You can then fix the conflicts during the rebase. Presumably you have +not published your topic other than by mail, so rebasing it is not a +problem. + +If you receive such a patch series (as maintainer, or perhaps as a +reader of the mailing list it was sent to), save the mails to files, +create a new topic branch and use 'git-am' to import the commits: + +.format-patch/am: Importing patches +[caption="Recipe: "] +===================================== +`git am < patch` +===================================== + +One feature worth pointing out is the three-way merge, which can help +if you get conflicts: `git am -3` will use index information contained +in patches to figure out the merge base. See linkgit:git-am[1] for +other options. + + +SEE ALSO +-------- +linkgit:gittutorial[7], +linkgit:git-push[1], +linkgit:git-pull[1], +linkgit:git-merge[1], +linkgit:git-rebase[1], +linkgit:git-format-patch[1], +linkgit:git-send-email[1], +linkgit:git-am[1] + +GIT +--- +Part of the linkgit:git[1] suite. |