diff options
Diffstat (limited to 'Documentation')
81 files changed, 1597 insertions, 284 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index ed4e443a3c..227f46ae40 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -91,16 +91,10 @@ For shell scripts specifically (not exhaustive): - No shell arrays. - - No strlen ${#parameter}. - - No pattern replacement ${parameter/pattern/string}. - We use Arithmetic Expansion $(( ... )). - - Inside Arithmetic Expansion, spell shell variables with $ in front - of them, as some shells do not grok $((x)) while accepting $(($x)) - just fine (e.g. dash older than 0.5.4). - - We do not use Process Substitution <(list) or >(list). - Do not write control structures on a single line with semicolon. @@ -238,6 +232,18 @@ For C programs: while( condition ) func (bar+1); + - Do not explicitly compare an integral value with constant 0 or '\0', + or a pointer value with constant NULL. For instance, to validate that + counted array <ptr, cnt> is initialized but has no elements, write: + + if (!ptr || cnt) + BUG("empty array expected"); + + and not: + + if (ptr == NULL || cnt != 0); + BUG("empty array expected"); + - We avoid using braces unnecessarily. I.e. if (bla) { diff --git a/Documentation/Makefile b/Documentation/Makefile index 8fe829cc1b..15d9d04f31 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -30,6 +30,7 @@ MAN7_TXT += gitcredentials.txt MAN7_TXT += gitcvs-migration.txt MAN7_TXT += gitdiffcore.txt MAN7_TXT += giteveryday.txt +MAN7_TXT += gitfaq.txt MAN7_TXT += gitglossary.txt MAN7_TXT += gitnamespaces.txt MAN7_TXT += gitremote-helpers.txt @@ -149,32 +150,9 @@ endif -include ../config.mak.autogen -include ../config.mak -# -# For docbook-xsl ... -# -1.68.1, no extra settings are needed? -# 1.69.0, set ASCIIDOC_ROFF? -# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? -# 1.71.1, set ASCIIDOC_ROFF? -# 1.72.0, set DOCBOOK_XSL_172. -# 1.73.0-, no extra settings are needed -# - -ifdef DOCBOOK_XSL_172 -ASCIIDOC_EXTRA += -a git-asciidoc-no-roff -MANPAGE_XSL = manpage-1.72.xsl -else - ifndef ASCIIDOC_ROFF - # docbook-xsl after 1.72 needs the regular XSL, but will not - # pass-thru raw roff codes from asciidoc.conf, so turn them off. - ASCIIDOC_EXTRA += -a git-asciidoc-no-roff - endif -endif ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif -ifdef DOCBOOK_SUPPRESS_SP -XMLTO_EXTRA += -m manpage-suppress-sp.xsl -endif # Newer DocBook stylesheet emits warning cruft in the output when # this is not set, and if set it shows an absolute link. Older diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt index aa828dfdc4..c3f2d1a831 100644 --- a/Documentation/MyFirstObjectWalk.txt +++ b/Documentation/MyFirstObjectWalk.txt @@ -357,9 +357,6 @@ static void walken_commit_walk(struct rev_info *rev) ... while ((commit = get_revision(rev))) { - if (!commit) - continue; - strbuf_reset(&prettybuf); pp_commit_easy(CMIT_FMT_ONELINE, commit, &prettybuf); puts(prettybuf.buf); diff --git a/Documentation/RelNotes/2.17.4.txt b/Documentation/RelNotes/2.17.4.txt new file mode 100644 index 0000000000..7d794ca01a --- /dev/null +++ b/Documentation/RelNotes/2.17.4.txt @@ -0,0 +1,16 @@ +Git v2.17.4 Release Notes +========================= + +This release is to address the security issue: CVE-2020-5260 + +Fixes since v2.17.3 +------------------- + + * With a crafted URL that contains a newline in it, the credential + helper machinery can be fooled to give credential information for + a wrong host. The attack has been made impossible by forbidding + a newline character in any value passed via the credential + protocol. + +Credit for finding the vulnerability goes to Felix Wilhelm of Google +Project Zero. diff --git a/Documentation/RelNotes/2.17.5.txt b/Documentation/RelNotes/2.17.5.txt new file mode 100644 index 0000000000..2abb821a73 --- /dev/null +++ b/Documentation/RelNotes/2.17.5.txt @@ -0,0 +1,22 @@ +Git v2.17.5 Release Notes +========================= + +This release is to address a security issue: CVE-2020-11008 + +Fixes since v2.17.4 +------------------- + + * With a crafted URL that contains a newline or empty host, or lacks + a scheme, the credential helper machinery can be fooled into + providing credential information that is not appropriate for the + protocol in use and host being contacted. + + Unlike the vulnerability CVE-2020-5260 fixed in v2.17.4, the + credentials are not for a host of the attacker's choosing; instead, + they are for some unspecified host (based on how the configured + credential helper handles an absent "host" parameter). + + The attack has been made impossible by refusing to work with + under-specified credential patterns. + +Credit for finding the vulnerability goes to Carlo Arenas. diff --git a/Documentation/RelNotes/2.18.3.txt b/Documentation/RelNotes/2.18.3.txt new file mode 100644 index 0000000000..25143f0cec --- /dev/null +++ b/Documentation/RelNotes/2.18.3.txt @@ -0,0 +1,5 @@ +Git v2.18.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.18.4.txt b/Documentation/RelNotes/2.18.4.txt new file mode 100644 index 0000000000..e8ef858a00 --- /dev/null +++ b/Documentation/RelNotes/2.18.4.txt @@ -0,0 +1,5 @@ +Git v2.18.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.19.4.txt b/Documentation/RelNotes/2.19.4.txt new file mode 100644 index 0000000000..35d0ae561b --- /dev/null +++ b/Documentation/RelNotes/2.19.4.txt @@ -0,0 +1,5 @@ +Git v2.19.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.19.5.txt b/Documentation/RelNotes/2.19.5.txt new file mode 100644 index 0000000000..18a4dcbfd6 --- /dev/null +++ b/Documentation/RelNotes/2.19.5.txt @@ -0,0 +1,5 @@ +Git v2.19.5 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.20.3.txt b/Documentation/RelNotes/2.20.3.txt new file mode 100644 index 0000000000..f6eccd103b --- /dev/null +++ b/Documentation/RelNotes/2.20.3.txt @@ -0,0 +1,5 @@ +Git v2.20.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.20.4.txt b/Documentation/RelNotes/2.20.4.txt new file mode 100644 index 0000000000..5a9e24e470 --- /dev/null +++ b/Documentation/RelNotes/2.20.4.txt @@ -0,0 +1,5 @@ +Git v2.20.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.21.2.txt b/Documentation/RelNotes/2.21.2.txt new file mode 100644 index 0000000000..a0fb83bb53 --- /dev/null +++ b/Documentation/RelNotes/2.21.2.txt @@ -0,0 +1,5 @@ +Git v2.21.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.21.3.txt b/Documentation/RelNotes/2.21.3.txt new file mode 100644 index 0000000000..2ca0aa5c62 --- /dev/null +++ b/Documentation/RelNotes/2.21.3.txt @@ -0,0 +1,5 @@ +Git v2.21.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.22.3.txt b/Documentation/RelNotes/2.22.3.txt new file mode 100644 index 0000000000..57296f6d17 --- /dev/null +++ b/Documentation/RelNotes/2.22.3.txt @@ -0,0 +1,5 @@ +Git v2.22.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.22.4.txt b/Documentation/RelNotes/2.22.4.txt new file mode 100644 index 0000000000..8b5f3e3f37 --- /dev/null +++ b/Documentation/RelNotes/2.22.4.txt @@ -0,0 +1,5 @@ +Git v2.22.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.23.2.txt b/Documentation/RelNotes/2.23.2.txt new file mode 100644 index 0000000000..b697cbe0e3 --- /dev/null +++ b/Documentation/RelNotes/2.23.2.txt @@ -0,0 +1,5 @@ +Git v2.23.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.23.3.txt b/Documentation/RelNotes/2.23.3.txt new file mode 100644 index 0000000000..2e35490137 --- /dev/null +++ b/Documentation/RelNotes/2.23.3.txt @@ -0,0 +1,5 @@ +Git v2.23.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.24.2.txt b/Documentation/RelNotes/2.24.2.txt new file mode 100644 index 0000000000..0049f65503 --- /dev/null +++ b/Documentation/RelNotes/2.24.2.txt @@ -0,0 +1,5 @@ +Git v2.24.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.24.3.txt b/Documentation/RelNotes/2.24.3.txt new file mode 100644 index 0000000000..5302e0f73b --- /dev/null +++ b/Documentation/RelNotes/2.24.3.txt @@ -0,0 +1,5 @@ +Git v2.24.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.25.3.txt b/Documentation/RelNotes/2.25.3.txt new file mode 100644 index 0000000000..15f7f21f10 --- /dev/null +++ b/Documentation/RelNotes/2.25.3.txt @@ -0,0 +1,5 @@ +Git v2.25.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.25.4.txt b/Documentation/RelNotes/2.25.4.txt new file mode 100644 index 0000000000..0dbb5daeec --- /dev/null +++ b/Documentation/RelNotes/2.25.4.txt @@ -0,0 +1,5 @@ +Git v2.25.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.26.1.txt b/Documentation/RelNotes/2.26.1.txt new file mode 100644 index 0000000000..1b4ecb3fdc --- /dev/null +++ b/Documentation/RelNotes/2.26.1.txt @@ -0,0 +1,5 @@ +Git v2.26.1 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.26.2.txt b/Documentation/RelNotes/2.26.2.txt new file mode 100644 index 0000000000..d434d0c695 --- /dev/null +++ b/Documentation/RelNotes/2.26.2.txt @@ -0,0 +1,5 @@ +Git v2.26.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.27.0.txt b/Documentation/RelNotes/2.27.0.txt index 7a5c7fff80..5fb8c0cf67 100644 --- a/Documentation/RelNotes/2.27.0.txt +++ b/Documentation/RelNotes/2.27.0.txt @@ -47,6 +47,74 @@ UI, Workflows & Features exists, and neither --[no-]rebase nor --ff-only is given (which would result a merge). + * "git p4" learned four new hooks and also "--no-verify" option to + bypass them (and the existing "p4-pre-submit" hook). + + * "git pull" shares many options with underlying "git fetch", but + some of them were not documented and some of those that would make + sense to pass down were not passed down. + + * "git rebase" learned the "--no-gpg-sign" option to countermand + commit.gpgSign the user may have. + + * The output from "git format-patch" uses RFC 2047 encoding for + non-ASCII letters on From: and Subject: headers, so that it can + directly be fed to e-mail programs. A new option has been added + to produce these headers in raw. + + * "git log" learned "--show-pulls" that helps pathspec limited + history views; a merge commit that takes the whole change from a + side branch, which is normally omitted from the output, is shown + in addition to the commits that introduce real changes. + + * The interactive input from various codepaths are consolidated and + any prompt possibly issued earlier are fflush()ed before we read. + + * Allow "git rebase" to reapply all local commits, even if the may be + already in the upstream, without checking first. + + * The 'pack.useSparse' configuration variable now defaults to 'true', + enabling an optimization that has been experimental since Git 2.21. + + * "git rebase" happens to call some hooks meant for "checkout" and + "commit" by this was not a designed behaviour than historical + accident. This has been documented. + + * "git merge" learns the "--autostash" option. + + * "sparse-checkout" UI improvements. + + * "git update-ref --stdin" learned a handful of new verbs to let the + user control ref update transactions more explicitly, which helps + as an ingredient to implement two-phase commit-style atomic + ref-updates across multiple repositories. + + * "git commit-graph write" learned different ways to write out split + files. + + * Introduce an extension to the commit-graph to make it efficient to + check for the paths that were modified at each commit using Bloom + filters. + + * The approxidate parser learns to parse seconds with fraction and + ignore fractional part. + + * The userdiff patterns for Markdown documents have been added. + + * The sparse-checkout patterns have been forbidden from excluding all + paths, leaving an empty working tree, for a long time. This + limitation has been lifted. + + * "git restore --staged --worktree" now defaults to take the contents + out of "HEAD", instead of erring out. + + * "git p4" learned to recover from a (broken) state where a directory + and a file are recorded at the same path in the Perforce repository + the same way as their clients do. + + * "git multi-pack-index repack" has been taught to honor some + repack.* configuration variables. + Performance, Internal Implementation, Development Support etc. @@ -60,6 +128,61 @@ Performance, Internal Implementation, Development Support etc. * "git stash" has kept an escape hatch to use the scripted version for a few releases, which got stale. It has been removed. + * Enable tests that require GnuPG on Windows. + + * Minor test usability improvement. + + * Trace2 enhancement to allow logging of the environment variables. + + * Test clean-up continues. + + * Perf-test update. + + * A Windows-specific test element has been made more robust against + misuse from both user's environment and programmer's errors. + + * Various tests have been updated to work around issues found with + shell utilities that come with busybox etc. + + * The config API made mixed uses of int and size_t types to represent + length of various pieces of text it parsed, which has been updated + to use the correct type (i.e. size_t) throughout. + + * The "--decorate-refs" and "--decorate-refs-exclude" options "git + log" takes have learned a companion configuration variable + log.excludeDecoration that sits at the lowest priority in the + family. + + * A new CI job to build and run test suite on linux with musl libc + has been added. + + * Update the CI configuration to use GitHub Actions, retiring the one + based on Azure Pipelines. + + * The directory traversal code had redundant recursive calls which + made its performance characteristics exponential with respect to + the depth of the tree, which was corrected. + + * "git blame" learns to take advantage of the "changed-paths" Bloom + filter stored in the commit-graph file. + + * The "bugreport" tool has been added. + + * The object walk with object filter "--filter=tree:0" can now take + advantage of the pack bitmap when available. + + * Instead of always building all branches at GitHub via Actions, + users can specify which branches to build. + + * Codepaths that show progress meter have been taught to also use the + start_progress() and the stop_progress() calls as a "region" to be + traced. + + * Instead of downloading Windows SDK for CI jobs for windows builds + from an external site (wingit.blob.core.windows.net), use the one + created in the windows-build job, to work around quota issues at + the external site. + Fixes since v2.26 ----------------- @@ -85,6 +208,282 @@ Fixes since v2.26 was rewritten in C back in 2.20 era, which has been corrected. (merge f08132f889 at/rebase-fork-point-regression-fix later to maint). + * The import-tars importer (in contrib/fast-import/) used to create + phony files at the top-level of the repository when the archive + contains global PAX headers, which made its own logic to detect and + omit the common leading directory ineffective, which has been + corrected. + (merge c839fcff65 js/import-tars-do-not-make-phony-files-from-pax-headers later to maint). + + * Simplify the commit ancestry connectedness check in a partial clone + repository in which "promised" objects are assumed to be obtainable + lazily on-demand from promisor remote repositories. + (merge 2b98478c6f jt/connectivity-check-optim-in-partial-clone later to maint). + + * The server-end of the v2 protocol to serve "git clone" and "git + fetch" was not prepared to see a delim packets at unexpected + places, which led to a crash. + (merge cacae4329f jk/harden-protocol-v2-delim-handling later to maint). + + * When fed a midx that records no objects, some codepaths tried to + loop from 0 through (num_objects-1), which, due to integer + arithmetic wrapping around, made it nonsense operation with out of + bounds array accesses. The code has been corrected to reject such + an midx file. + (merge 796d61cdc0 dr/midx-avoid-int-underflow later to maint). + + * Utitiles run via the run_command() API were not spawned correctly + on Cygwin, when the paths to them are given as a full path with + backslashes. + (merge 05ac8582bc ak/run-command-on-cygwin-fix later to maint). + + * "git pull --rebase" tried to run a rebase even after noticing that + the pull results in a fast-forward and no rebase is needed nor + sensible, for the past few years due to a mistake nobody noticed. + (merge fbae70ddc6 en/pull-do-not-rebase-after-fast-forwarding later to maint). + + * "git rebase" with the merge backend did not work well when the + rebase.abbreviateCommands configuration was set. + (merge de9f1d3ef4 ag/rebase-merge-allow-ff-under-abbrev-command later to maint). + + * The logic to auto-follow tags by "git clone --single-branch" was + not careful to avoid lazy-fetching unnecessary tags, which has been + corrected. + (merge 167a575e2d jk/use-quick-lookup-in-clone-for-tag-following later to maint). + + * "git rebase -i" did not leave the reflog entries correctly. + (merge 1f6965f994 en/sequencer-reflog-action later to maint). + + * The more aggressive updates to remote-tracking branches we had for + the past 7 years or so were not reflected in the documentation, + which has been corrected. + (merge a44088435c pb/pull-fetch-doc later to maint). + + * We've left the command line parsing of "git log :/a/b/" broken for + about a full year without anybody noticing, which has been + corrected. + (merge 0220461071 jc/missing-ref-store-fix later to maint). + + * Misc fixes for Windows. + (merge 3efc128cd5 js/mingw-fixes later to maint). + + * "git rebase" (again) learns to honor "--no-keep-empty", which lets + the user to discard commits that are empty from the beginning (as + opposed to the ones that become empty because of rebasing). The + interactive rebase also marks commits that are empty in the todo. + (merge 50ed76148a en/rebase-no-keep-empty later to maint). + + * Parsing the host part out of URL for the credential helper has been corrected. + (merge 4c5971e18a jk/credential-parsing-end-of-host-in-URL later to maint). + + * Document the recommended way to abort a failing test early (e.g. by + exiting a loop), which is to say "return 1". + (merge 7cc112dc95 jc/doc-test-leaving-early later to maint). + + * The code that refreshes the last access and modified time of + on-disk packfiles and loose object files have been updated. + (merge 312cd76130 lr/freshen-file-fix later to maint). + + * Validation of push certificate has been made more robust against + timing attacks. + (merge 719483e547 bc/constant-memequal later to maint). + + * The custom hash function used by "git fast-import" has been + replaced with the one from hashmap.c, which gave us a nice + performance boost. + (merge d8410a816b jk/fast-import-use-hashmap later to maint). + + * The "git submodule" command did not initialize a few variables it + internally uses and was affected by variable settings leaked from + the environment. + (merge 65d100c4dd lx/submodule-clear-variables later to maint). + + * Raise the minimum required version of docbook-xsl package to 1.74, + as 1.74.0 was from late 2008, which is more than 10 years old, and + drop compatibility cruft from our documentation suite. + (merge 3c255ad660 ma/doc-discard-docbook-xsl-1.73 later to maint). + + * "git log" learns "--[no-]mailmap" as a synonym to "--[no-]use-mailmap" + (merge 88acccda38 jc/log-no-mailmap later to maint). + + * "git commit-graph write --expire-time=<timestamp>" did not use the + given timestamp correctly, which has been corrected. + (merge b09b785c78 ds/commit-graph-expiry-fix later to maint). + + * Tests update to use "test-chmtime" instead of "touch -t". + (merge e892a56845 ds/t5319-touch-fix later to maint). + + * "git diff" in a partial clone learned to avoid lazy loading blob + objects in more casese when they are not needed. + (merge 95acf11a3d jt/avoid-prefetch-when-able-in-diff later to maint). + + * "git push --atomic" used to show failures for refs that weren't + even pushed, which has been corrected. + (merge dfe1b7f19c jx/atomic-push later to maint). + + * Code in builtin/*, i.e. those can only be called from within + built-in subcommands, that implements bulk of a couple of + subcommands have been moved to libgit.a so that they could be used + by others. + (merge 9460fd48b5 dl/libify-a-few later to maint). + + * Allowing the user to split a patch hunk while "git stash -p" does + not work well; a band-aid has been added to make this (partially) + work better. + + * "git diff-tree --pretty --notes" used to hit an assertion failure, + as it forgot to initialize the notes subsystem. + (merge 5778b22b3d tb/diff-tree-with-notes later to maint). + + * "git range-diff" fixes. + (merge 8d1675eb7f vd/range-diff-with-custom-pretty-format-fix later to maint). + + * "git grep" did not quote a path with unusual character like other + commands (like "git diff", "git status") do, but did quote when run + from a subdirectory, both of which has been corrected. + (merge 45115d8490 mt/grep-cquote-path later to maint). + + * GNU/Hurd is also among the ones that need the fopen() wrapper. + (merge 274a1328fb jc/gnu-hurd-lets-fread-read-dirs later to maint). + + * Those fetching over protocol v2 from linux-next and other kernel + repositories are reporting that v2 often fetches way too much than + needed. + (merge 11c7f2a30b jn/demote-proto2-from-default later to maint). + + * The upload-pack protocol v2 gave up too early before finding a + common ancestor, resulting in a wasteful fetch from a fork of a + project. This has been corrected to match the behaviour of v0 + protocol. + (merge 2f0a093dd6 jt/v2-fetch-nego-fix later to maint). + + * The build procedure did not use the libcurl library and its include + files correctly for a custom-built installation. + (merge 0573831950 jk/build-with-right-curl later to maint). + + * Tighten "git mailinfo" to notice and error out when decoded result + contains NUL in it. + (merge 3919997447 dd/mailinfo-with-nul later to maint). + + * Fix in-core inconsistency after fetching into a shallow repository + that broke the code to write out commit-graph. + (merge 37b9dcabfc tb/reset-shallow later to maint). + + * The commit-graph code exhausted file descriptors easily when it + does not have to. + (merge c8828530b7 tb/commit-graph-fd-exhaustion-fix later to maint). + + * The multi-pack-index left mmapped file descriptors open when it + does not have to. + (merge 6c7ff7cf7f ds/multi-pack-index later to maint). + + * Recent update to Homebrew used by macOS folks breaks build by + moving gettext library and necessary headers. + (merge a0b3108618 ds/build-homebrew-gettext-fix later to maint). + + * Incompatible options "--root" and "--fork-point" of "git rebase" + have been marked and documented as being incompatible. + (merge a35413c378 en/rebase-root-and-fork-point-are-incompatible later to maint). + + * Error and verbose trace messages from "git push" did not redact + credential material embedded in URLs. + (merge d192fa5006 js/anonymise-push-url-in-errors later to maint). + + * Update the parser used for credential.<URL>.<variable> + configuration, to handle <URL>s with '/' in them correctly. + (merge b44d0118ac bc/wildcard-credential later to maint). + + * Recent updates broke parsing of "credential.<url>.<key>" where + <url> is not a full URL (e.g. [credential "https://"] helper = ...) + stopped working, which has been corrected. + (merge 9a121b0d22 js/partial-urlmatch-2.17 later to maint). + (merge cd93e6c029 js/partial-urlmatch later to maint). + + * Some of the files commit-graph subsystem keeps on disk did not + correctly honor the core.sharedRepository settings and some were + left read-write. + + * In error messages that "git switch" mentions its option to create a + new branch, "-b/-B" options were shown, where "-c/-C" options + should be, which has been corrected. + (merge 7c16ef7577 dl/switch-c-option-in-error-message later to maint). + + * With the recent tightening of the code that is used to parse + various parts of a URL for use in the credential subsystem, a + hand-edited credential-store file causes the credential helper to + die, which is a bit too harsh to the users. Demote the error + behaviour to just ignore and keep using well-formed lines instead. + (merge c03859a665 cb/credential-store-ignore-bogus-lines later to maint). + + * The samples in the credential documentation has been updated to + make it clear that we depict what would appear in the .git/config + file, by adding appropriate quotes as needed.. + (merge 177681a07e jk/credential-sample-update later to maint). + + * "git branch" and other "for-each-ref" variants accepted multiple + --sort=<key> options in the increasing order of precedence, but it + had a few breakages around "--ignore-case" handling, and tie-breaking + with the refname, which have been fixed. + (merge 7c5045fc18 jk/for-each-ref-multi-key-sort-fix later to maint). + + * The coding guideline for shell scripts instructed to refer to a + variable with dollar-sign inside arithmetic expansion to work + around a bug in old versions of dash, which is a thing of the past. + Now we are not forbidden from writing $((var+1)). + (merge 32b5fe7f0e jk/arith-expansion-coding-guidelines later to maint). + + * The <stdlib.h> header on NetBSD brings in its own definition of + hmac() function (eek), which conflicts with our own and unrelated + function with the same name. Our function has been renamed to work + around the issue. + (merge 3013118eb8 cb/avoid-colliding-with-netbsd-hmac later to maint). + + * The basic test did not honor $TEST_SHELL_PATH setting, which has + been corrected. + (merge 0555e4af58 cb/t0000-use-the-configured-shell later to maint). + + * Minor in-code comments and documentation updates around credential + API. + (merge 1aed817f99 cb/credential-doc-fixes later to maint). + + * Teach "am", "commit", "merge" and "rebase", when they are run with + the "--quiet" option, to pass "--quiet" down to "gc --auto". + (merge 7c3e9e8cfb jc/auto-gc-quiet later to maint). + + * The code to skip unmerged paths in the index when sparse checkout + is in use would have made out-of-bound access of the in-core index + when the last path was unmerged, which has been corrected. + + * Serving a "git fetch" client over "git://" and "ssh://" protocols + using the on-wire protocol version 2 was buggy on the server end + when the client needs to make a follow-up request to + e.g. auto-follow tags. + (merge 08450ef791 cc/upload-pack-v2-fetch-fix later to maint). + + * "git bisect replay" had trouble with input files when they used + CRLF line ending, which has been corrected. + (merge 6c722cbe5a cw/bisect-replay-with-dos later to maint). + + * "rebase -i" segfaulted when rearranging a sequence that has a + fix-up that applies another fix-up (which may or may not be a + fix-up of yet another step). + (merge 02471e7e20 js/rebase-autosquash-double-fixup-fix later to maint). + + * "git fsck" ensures that the paths recorded in tree objects are + sorted and without duplicates, but it failed to notice a case where + a blob is followed by entries that sort before a tree with the same + name. This has been corrected. + (merge 9068cfb20f rs/fsck-duplicate-names-in-trees later to maint). + + * Code clean-up by removing a compatibility implementation of a + function we no longer use. + (merge 84b0115f0d cb/no-more-gmtime later to maint). + + * When a binary file gets modified and renamed on both sides of history + to different locations, both files would be written to the working + tree but both would have the contents from "ours". This has been + corrected so that the path from each side gets their original content. + * Other code cleanup, docfix, build fix, etc. (merge 564956f358 jc/maintain-doc later to maint). (merge 7422b2a0a1 sg/commit-slab-clarify-peek later to maint). @@ -92,3 +491,25 @@ Fixes since v2.26 (merge 757c2ba3e2 en/oidset-uninclude-hashmap later to maint). (merge 8312aa7d74 jc/config-tar later to maint). (merge d00a5bdd50 ss/submodule-foreach-cb later to maint). + (merge 64d1022e14 ar/test-style-fixes later to maint). + (merge 4a465443a6 ds/doc-clone-filter later to maint). + (merge bb2dbe301b jk/t3419-drop-expensive-tests later to maint). + (merge d3507cc712 js/test-junit-finalization-fix later to maint). + (merge 2149b6748f bc/faq later to maint). + (merge 12dc0879f1 jk/test-cleanup later to maint). + (merge 344420bf0f pb/rebase-doc-typofix later to maint). + (merge 7cd54d37dc dl/wrapper-fix-indentation later to maint). + (merge 78725ebda9 jc/allow-strlen-substitution-in-shell-scripts later to maint). + (merge 2ecfcdecc6 jm/gitweb-fastcgi-utf8 later to maint). + (merge 0740d0a5d3 jk/oid-array-cleanups later to maint). + (merge a1aba0c95c js/t0007-typofix later to maint). + (merge 76ba7fa225 ma/config-doc-fix later to maint). + (merge 826f0c0df2 js/subtree-doc-update-to-asciidoctor-2 later to maint). + (merge 88eaf361e0 eb/mboxrd-doc later to maint). + (merge 051cc54941 tm/zsh-complete-switch-restore later to maint). + (merge 39102cf4fe ms/doc-revision-illustration-fix later to maint). + (merge 4d9378bfad eb/gitweb-more-trailers later to maint). + (merge bdccbf7047 mt/doc-worktree-ref later to maint). + (merge ce9baf234f dl/push-recurse-submodules-fix later to maint). + (merge 4153274052 bc/doc-credential-helper-value later to maint). + (merge 5c7bb0146e jc/codingstyle-compare-with-null later to maint). diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index 8fc4b67081..3e4c13971b 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -31,24 +31,6 @@ ifdef::backend-docbook[] endif::backend-docbook[] ifdef::backend-docbook[] -ifndef::git-asciidoc-no-roff[] -# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. -# v1.72 breaks with this because it replaces dots not in roff requests. -[listingblock] -<example><title>{title}</title> -<literallayout class="monospaced"> -ifdef::doctype-manpage[] - .ft C -endif::doctype-manpage[] -| -ifdef::doctype-manpage[] - .ft -endif::doctype-manpage[] -</literallayout> -{title#}</example> -endif::git-asciidoc-no-roff[] - -ifdef::git-asciidoc-no-roff[] ifdef::doctype-manpage[] # The following two small workarounds insert a simple paragraph after screen [listingblock] @@ -67,7 +49,6 @@ ifdef::doctype-manpage[] {title#}</para></formalpara> {title%}<simpara></simpara> endif::doctype-manpage[] -endif::git-asciidoc-no-roff[] endif::backend-docbook[] ifdef::doctype-manpage[] diff --git a/Documentation/config.txt b/Documentation/config.txt index 2450589a0e..ef0768b91a 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -3,11 +3,12 @@ CONFIGURATION FILE The Git configuration file contains a number of variables that affect the Git commands' behavior. The files `.git/config` and optionally -`config.worktree` (see `extensions.worktreeConfig` below) in each -repository are used to store the configuration for that repository, and -`$HOME/.gitconfig` is used to store a per-user configuration as -fallback values for the `.git/config` file. The file `/etc/gitconfig` -can be used to store a system-wide default configuration. +`config.worktree` (see the "CONFIGURATION FILE" section of +linkgit:git-worktree[1]) in each repository are used to store the +configuration for that repository, and `$HOME/.gitconfig` is used to +store a per-user configuration as fallback values for the `.git/config` +file. The file `/etc/gitconfig` can be used to store a system-wide +default configuration. The configuration variables are used by both the Git plumbing and the porcelains. The variables are divided into sections, wherein @@ -220,12 +221,12 @@ Example ; affected by the condition [includeIf "gitdir:/path/to/group/"] path = foo.inc ----- - ; include only if we are in a worktree where foo-branch is - ; currently checked out - [includeIf "onbranch:foo-branch"] - path = foo.inc +; include only if we are in a worktree where foo-branch is +; currently checked out +[includeIf "onbranch:foo-branch"] + path = foo.inc +---- Values ~~~~~~ diff --git a/Documentation/config/credential.txt b/Documentation/config/credential.txt index 60fb3189e1..9d01641c28 100644 --- a/Documentation/config/credential.txt +++ b/Documentation/config/credential.txt @@ -1,9 +1,13 @@ credential.helper:: Specify an external helper to be called when a username or password credential is needed; the helper may consult external - storage to avoid prompting the user for the credentials. Note - that multiple helpers may be defined. See linkgit:gitcredentials[7] - for details. + storage to avoid prompting the user for the credentials. This is + normally the name of a credential helper with possible + arguments, but may also be an absolute path with arguments or, if + preceded by `!`, shell commands. ++ +Note that multiple helpers may be defined. See linkgit:gitcredentials[7] +for details and examples. credential.useHttpPath:: When acquiring credentials, consider the "path" component of an http diff --git a/Documentation/config/fetch.txt b/Documentation/config/fetch.txt index f11940280f..b1a9b1461d 100644 --- a/Documentation/config/fetch.txt +++ b/Documentation/config/fetch.txt @@ -1,11 +1,14 @@ fetch.recurseSubmodules:: - This option can be either set to a boolean value or to 'on-demand'. + This option controls whether `git fetch` (and the underlying fetch + in `git pull`) will recursively fetch into populated submodules. + This option can be set either to a boolean value or to 'on-demand'. Setting it to a boolean changes the behavior of fetch and pull to - unconditionally recurse into submodules when set to true or to not - recurse at all when set to false. When set to 'on-demand' (the default - value), fetch and pull will only recurse into a populated submodule - when its superproject retrieves a commit that updates the submodule's + recurse unconditionally into submodules when set to true or to not + recurse at all when set to false. When set to 'on-demand', fetch and + pull will only recurse into a populated submodule when its + superproject retrieves a commit that updates the submodule's reference. + Defaults to 'on-demand', or to the value of 'submodule.recurse' if set. fetch.fsckObjects:: If it is set to true, git-fetch-pack will check all fetched diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index 45c7bd5a8f..564e8091ba 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -57,6 +57,11 @@ format.suffix:: `.patch`. Use this variable to change that suffix (make sure to include the dot if you want it). +format.encodeEmailHeaders:: + Encode email headers that have non-ASCII characters with + "Q-encoding" (described in RFC 2047) for email transmission. + Defaults to true. + format.pretty:: The default pretty format for log/show/whatchanged command, See linkgit:git-log[1], linkgit:git-show[1], diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt index e9e1e397f3..208d5fdcaa 100644 --- a/Documentation/config/log.txt +++ b/Documentation/config/log.txt @@ -18,6 +18,12 @@ log.decorate:: names are shown. This is the same as the `--decorate` option of the `git log`. +log.excludeDecoration:: + Exclude the specified patterns from the log decorations. This is + similar to the `--decorate-refs-exclude` command-line option, but + the config option can be overridden by the `--decorate-refs` + option. + log.follow:: If `true`, `git log` will act as if the `--follow` option was used when a single <path> is given. This has the same limitations as `--follow`, diff --git a/Documentation/config/merge.txt b/Documentation/config/merge.txt index 6a313937f8..cb2ed58907 100644 --- a/Documentation/config/merge.txt +++ b/Documentation/config/merge.txt @@ -70,6 +70,16 @@ merge.stat:: Whether to print the diffstat between ORIG_HEAD and the merge result at the end of the merge. True by default. +merge.autoStash:: + When set to true, automatically create a temporary stash entry + before the operation begins, and apply it after the operation + ends. This means that you can run merge on a dirty worktree. + However, use with care: the final stash application after a + successful merge might result in non-trivial conflicts. + This option can be overridden by the `--no-autostash` and + `--autostash` options of linkgit:git-merge[1]. + Defaults to false. + merge.tool:: Controls which merge tool is used by linkgit:git-mergetool[1]. The list below shows the valid built-in values. diff --git a/Documentation/config/protocol.txt b/Documentation/config/protocol.txt index 756591d77b..0b40141613 100644 --- a/Documentation/config/protocol.txt +++ b/Documentation/config/protocol.txt @@ -48,7 +48,7 @@ protocol.version:: If set, clients will attempt to communicate with a server using the specified protocol version. If the server does not support it, communication falls back to version 0. - If unset, the default is `2`. + If unset, the default is `0`. Supported versions: + -- diff --git a/Documentation/config/push.txt b/Documentation/config/push.txt index 0a7aa322a9..f5e5b38c68 100644 --- a/Documentation/config/push.txt +++ b/Documentation/config/push.txt @@ -112,3 +112,5 @@ push.recurseSubmodules:: is 'no' then default behavior of ignoring submodules when pushing is retained. You may override this configuration at time of push by specifying '--recurse-submodules=check|on-demand|no'. + If not set, 'no' is used by default, unless 'submodule.recurse' is + set (in which case a 'true' value means 'on-demand'). diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt index b33177151c..d7a63c8c12 100644 --- a/Documentation/config/submodule.txt +++ b/Documentation/config/submodule.txt @@ -59,9 +59,17 @@ submodule.active:: submodule.recurse:: Specifies if commands recurse into submodules by default. This - applies to all commands that have a `--recurse-submodules` option, - except `clone`. + applies to all commands that have a `--recurse-submodules` option + (`checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, `reset`, + `restore` and `switch`) except `clone` and `ls-files`. Defaults to false. + When set to true, it can be deactivated via the + `--no-recurse-submodules` option. Note that some Git commands + lacking this option may call some of the above commands affected by + `submodule.recurse`; for instance `git remote update` will call + `git fetch` but does not have a `--no-recurse-submodules` option. + For these commands a workaround is to temporarily change the + configuration value by using `git -c submodule.recurse=0`. submodule.fetchJobs:: Specifies how many submodules are fetched/cloned at the same time. diff --git a/Documentation/config/trace2.txt b/Documentation/config/trace2.txt index 4ce0b9a6d1..01d3afd8a8 100644 --- a/Documentation/config/trace2.txt +++ b/Documentation/config/trace2.txt @@ -48,6 +48,15 @@ trace2.configParams:: May be overridden by the `GIT_TRACE2_CONFIG_PARAMS` environment variable. Unset by default. +trace2.envVars:: + A comma-separated list of "important" environment variables that should + be recorded in the trace2 output. For example, + `GIT_HTTP_USER_AGENT,GIT_CONFIG` would cause the trace2 output to + contain events listing the overrides for HTTP user agent and the + location of the Git configuration file (assuming any are set). May be + overriden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by + default. + trace2.destinationDebug:: Boolean. When true Git will print error messages when a trace target destination cannot be opened for writing. diff --git a/Documentation/date-formats.txt b/Documentation/date-formats.txt index 6926e0a4c8..7e7eaba643 100644 --- a/Documentation/date-formats.txt +++ b/Documentation/date-formats.txt @@ -20,7 +20,10 @@ RFC 2822:: ISO 8601:: Time and date specified by the ISO 8601 standard, for example `2005-04-07T22:13:13`. The parser accepts a space instead of the - `T` character as well. + `T` character as well. Fractional parts of a second will be ignored, + for example `2005-04-07T22:13:13.019` will be treated as + `2005-04-07T22:13:13` + + NOTE: In addition, the date part is accepted in the following formats: `YYYY.MM.DD`, `MM/DD/YYYY` and `DD.MM.YYYY`. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 00d03ec8c3..6e2a160a47 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -163,7 +163,8 @@ ifndef::git-pull[] value. Use 'on-demand' to only recurse into a populated submodule when the superproject retrieves a commit that updates the submodule's reference to a commit that isn't already in the local submodule - clone. + clone. By default, 'on-demand' is used, unless + `fetch.recurseSubmodules` is set (see linkgit:git-config[1]). endif::git-pull[] -j:: @@ -204,7 +205,6 @@ ifndef::git-pull[] recursion (such as settings in linkgit:gitmodules[5] and linkgit:git-config[1]) override this option, as does specifying --[no-]recurse-submodules directly. -endif::git-pull[] -u:: --update-head-ok:: @@ -214,6 +214,7 @@ endif::git-pull[] to communicate with 'git fetch', and unless you are implementing your own Porcelain you are not supposed to use it. +endif::git-pull[] --upload-pack <upload-pack>:: When given, and the repository to fetch from is handled diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index ab5754e05d..38c0852139 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -148,9 +148,12 @@ default. You can use `--no-utf8` to override this. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. --continue:: -r:: diff --git a/Documentation/git-bugreport.txt b/Documentation/git-bugreport.txt new file mode 100644 index 0000000000..9edad66a63 --- /dev/null +++ b/Documentation/git-bugreport.txt @@ -0,0 +1,53 @@ +git-bugreport(1) +================ + +NAME +---- +git-bugreport - Collect information for user to file a bug report + +SYNOPSIS +-------- +[verse] +'git bugreport' [(-o | --output-directory) <path>] [(-s | --suffix) <format>] + +DESCRIPTION +----------- +Captures information about the user's machine, Git client, and repository state, +as well as a form requesting information about the behavior the user observed, +into a single text file which the user can then share, for example to the Git +mailing list, in order to report an observed bug. + +The following information is requested from the user: + + - Reproduction steps + - Expected behavior + - Actual behavior + +The following information is captured automatically: + + - 'git version --build-options' + - uname sysname, release, version, and machine strings + - Compiler-specific info string + - A list of enabled hooks + +This tool is invoked via the typical Git setup process, which means that in some +cases, it might not be able to launch - for example, if a relevant config file +is unreadable. In this kind of scenario, it may be helpful to manually gather +the kind of information listed above when manually asking for help. + +OPTIONS +------- +-o <path>:: +--output-directory <path>:: + Place the resulting bug report file in `<path>` instead of the root of + the Git repository. + +-s <format>:: +--suffix <format>:: + Specify an alternate suffix for the bugreport name, to create a file + named 'git-bugreport-<formatted suffix>'. This should take the form of a + strftime(3) format string; the current local time will be used. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index c8fb995fa7..5b697eee1b 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -292,11 +292,11 @@ Note that this option uses the no overlay mode by default (see also --recurse-submodules:: --no-recurse-submodules:: - Using `--recurse-submodules` will update the content of all initialized + Using `--recurse-submodules` will update the content of all active submodules according to the commit recorded in the superproject. If local modifications in a submodule would be overwritten the checkout will fail unless `-f` is used. If nothing (or `--no-recurse-submodules`) - is used, the work trees of submodules will not be updated. + is used, submodules working trees will not be updated. Just like linkgit:git-submodule[1], this will detach `HEAD` of the submodule. diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 83ce51aedf..75feeef08a 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -109,9 +109,12 @@ effect to your index in a row. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. --ff:: If the current HEAD is the same as the parent of the diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index bf24f1813a..08d6045c4a 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -15,7 +15,8 @@ SYNOPSIS [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] [--no-tags] [--recurse-submodules[=<pathspec>]] [--[no-]shallow-submodules] - [--[no-]remote-submodules] [--jobs <n>] [--sparse] [--] <repository> + [--[no-]remote-submodules] [--jobs <n>] [--sparse] + [--filter=<filter>] [--] <repository> [<directory>] DESCRIPTION @@ -162,6 +163,16 @@ objects from the source repository into a pack in the cloned repository. of the repository. The sparse-checkout file can be modified to grow the working directory as needed. +--filter=<filter-spec>:: + Use the partial clone feature and request that the server sends + a subset of reachable objects according to a given object filter. + When using `--filter`, the supplied `<filter-spec>` is used for + the partial clone filter. For example, `--filter=blob:none` will + filter out all blobs (file contents) until needed by Git. Also, + `--filter=blob:limit=<size>` will filter out all blobs of size + at least `<size>`. For more details on filter specifications, see + the `--filter` option in linkgit:git-rev-list[1]. + --mirror:: Set up a mirror of the source repository. This implies `--bare`. Compared to `--bare`, `--mirror` not only maps local branches of the diff --git a/Documentation/git-commit-graph.txt b/Documentation/git-commit-graph.txt index f4b13c005b..53a650225a 100644 --- a/Documentation/git-commit-graph.txt +++ b/Documentation/git-commit-graph.txt @@ -62,11 +62,18 @@ paths changed between a commit and it's first parent. This operation can take a while on large repositories. It provides significant performance gains for getting history of a directory or a file with `git log -- <path>`. + -With the `--split` option, write the commit-graph as a chain of multiple -commit-graph files stored in `<dir>/info/commit-graphs`. The new commits -not already in the commit-graph are added in a new "tip" file. This file -is merged with the existing file if the following merge conditions are -met: +With the `--split[=<strategy>]` option, write the commit-graph as a +chain of multiple commit-graph files stored in +`<dir>/info/commit-graphs`. Commit-graph layers are merged based on the +strategy and other splitting options. The new commits not already in the +commit-graph are added in a new "tip" file. This file is merged with the +existing file if the following merge conditions are met: +* If `--split=no-merge` is specified, a merge is never performed, and +the remaining options are ignored. `--split=replace` overwrites the +existing chain with a new one. A bare `--split` defers to the remaining +options. (Note that merging a chain of commit graphs replaces the +existing chain with a length-1 chain where the first and only +incremental holds the entire graph). + * If `--size-multiple=<X>` is not specified, let `X` equal 2. If the new tip file would have `N` commits and the previous tip has `M` commits and diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index ec15ee8d6f..2e2c581098 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -61,13 +61,11 @@ OPTIONS -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. - ---no-gpg-sign:: - Do not GPG-sign commit, to countermand a `--gpg-sign` option - given earlier on the command line. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand a `--gpg-sign` option given earlier on the command line. Commit Information ------------------ diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 13f653989f..a3baea32ae 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -348,13 +348,12 @@ changes to tracked files. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. - ---no-gpg-sign:: - Countermand `commit.gpgSign` configuration variable that is - set to force each and every commit to be signed. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. \--:: Do not interpret any more arguments as options. diff --git a/Documentation/git-credential-store.txt b/Documentation/git-credential-store.txt index 693dd9d9d7..76b0798856 100644 --- a/Documentation/git-credential-store.txt +++ b/Documentation/git-credential-store.txt @@ -94,6 +94,10 @@ stored on its own line as a URL like: https://user:pass@example.com ------------------------------ +No other kinds of lines (e.g. empty lines or comment lines) are +allowed in the file, even though some may be silently ignored. Do +not view or edit the file with editors. + When Git needs authentication for a particular URL context, credential-store will consider that context a pattern to match against each entry in the credentials file. If the protocol, hostname, and diff --git a/Documentation/git-credential.txt b/Documentation/git-credential.txt index 6f0c7ca80f..8d990e92fd 100644 --- a/Documentation/git-credential.txt +++ b/Documentation/git-credential.txt @@ -103,17 +103,20 @@ INPUT/OUTPUT FORMAT `git credential` reads and/or writes (depending on the action used) credential information in its standard input/output. This information can correspond either to keys for which `git credential` will obtain -the login/password information (e.g. host, protocol, path), or to the -actual credential data to be obtained (login/password). +the login information (e.g. host, protocol, path), or to the actual +credential data to be obtained (username/password). The credential is split into a set of named attributes, with one -attribute per line. Each attribute is -specified by a key-value pair, separated by an `=` (equals) sign, -followed by a newline. The key may contain any bytes except `=`, -newline, or NUL. The value may contain any bytes except newline or NUL. +attribute per line. Each attribute is specified by a key-value pair, +separated by an `=` (equals) sign, followed by a newline. + +The key may contain any bytes except `=`, newline, or NUL. The value may +contain any bytes except newline or NUL. + In both cases, all bytes are treated as-is (i.e., there is no quoting, and one cannot transmit a value with newline or NUL in it). The list of attributes is terminated by a blank line or end-of-file. + Git understands the following attributes: `protocol`:: @@ -123,7 +126,8 @@ Git understands the following attributes: `host`:: - The remote hostname for a network credential. + The remote hostname for a network credential. This includes + the port number if one was specified (e.g., "example.com:8088"). `path`:: @@ -134,7 +138,7 @@ Git understands the following attributes: `username`:: The credential's username, if we already have one (e.g., from a - URL, from the user, or from a previously run helper). + URL, the configuration, the user, or from a previously run helper). `password`:: @@ -146,8 +150,12 @@ Git understands the following attributes: value is parsed as a URL and treated as if its constituent parts were read (e.g., `url=https://example.com` would behave as if `protocol=https` and `host=example.com` had been provided). This - can help callers avoid parsing URLs themselves. Note that any - components which are missing from the URL (e.g., there is no - username in the example above) will be set to empty; if you want - to provide a URL and override some attributes, provide the URL - attribute first, followed by any overrides. + can help callers avoid parsing URLs themselves. + + Note that specifying a protocol is mandatory and if the URL + doesn't specify a hostname (e.g., "cert:///path/to/file") the + credential will contain a hostname attribute whose value is an + empty string. + + Components which are missing from the URL (e.g., there is no + username in the example above) will be left unset. diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 0d4f8951bb..0f81d0437b 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -24,6 +24,7 @@ SYNOPSIS [(--reroll-count|-v) <n>] [--to=<email>] [--cc=<email>] [--[no-]cover-letter] [--quiet] + [--[no-]encode-email-headers] [--no-notes | --notes[=<ref>]] [--interdiff=<previous>] [--range-diff=<previous> [--creation-factor=<percent>]] @@ -253,6 +254,13 @@ feeding the result to `git send-email`. containing the branch description, shortlog and the overall diffstat. You can fill in a description in the file before sending it out. +--encode-email-headers:: +--no-encode-email-headers:: + Encode email headers that have non-ASCII characters with + "Q-encoding" (described in RFC 2047), instead of outputting the + headers verbatim. Defaults to the value of the + `format.encodeEmailHeaders` configuration variable. + --interdiff=<previous>:: As a reviewer aid, insert an interdiff into the cover letter, or as commentary of the lone patch of a 1-patch series, showing diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index ddb6acc025..a7f9bc99ea 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -93,7 +93,7 @@ OPTIONS with `--no-index`. --recurse-submodules:: - Recursively search in each submodule that has been initialized and + Recursively search in each submodule that is active and checked out in the repository. When used in combination with the <tree> option the prefix of all submodule output will be the name of the parent project's <tree> object. This option has no effect @@ -206,8 +206,10 @@ providing this option will cause it to die. -z:: --null:: - Output \0 instead of the character that normally follows a - file name. + Use \0 as the delimiter for pathnames in the output, and print + them verbatim. Without this option, pathnames with "unusual" + characters are quoted as explained for the configuration + variable core.quotePath (see git-config(1)). -o:: --only-matching:: diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index bed09bb09e..20e6d21a74 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -43,12 +43,16 @@ OPTIONS If no `--decorate-refs` is given, pretend as if all refs were included. For each candidate, do not use it for decoration if it matches any patterns given to `--decorate-refs-exclude` or if it - doesn't match any of the patterns given to `--decorate-refs`. + doesn't match any of the patterns given to `--decorate-refs`. The + `log.excludeDecoration` config option allows excluding refs from + the decorations, but an explicit `--decorate-refs` pattern will + override a match in `log.excludeDecoration`. --source:: Print out the ref name given on the command line by which each commit was reached. +--[no-]mailmap:: --[no-]use-mailmap:: Use mailmap file to map author and committer names and email addresses to canonical real names and email addresses. See diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 8461c0e83e..3cb2ebb438 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -148,7 +148,7 @@ a space) at the start of each line: top directory. --recurse-submodules:: - Recursively calls ls-files on each submodule in the repository. + Recursively calls ls-files on each active submodule in the repository. Currently there is only support for the --cached mode. --abbrev[=<n>]:: diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 092529c619..3819fadac1 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -94,7 +94,8 @@ will be appended to the specified message. --abort:: Abort the current conflict resolution process, and - try to reconstruct the pre-merge state. + try to reconstruct the pre-merge state. If an autostash entry is + present, apply it to the worktree. + If there were uncommitted worktree changes present when the merge started, 'git merge --abort' will in some cases be unable to @@ -102,11 +103,15 @@ reconstruct these changes. It is therefore recommended to always commit or stash your changes before running 'git merge'. + 'git merge --abort' is equivalent to 'git reset --merge' when -`MERGE_HEAD` is present. +`MERGE_HEAD` is present unless `MERGE_AUTOSTASH` is also present in +which case 'git merge --abort' applies the stash entry to the worktree +whereas 'git reset --merge' will save the stashed changes in the stash +list. --quit:: Forget about the current merge in progress. Leave the index - and the working tree as-is. + and the working tree as-is. If `MERGE_AUTOSTASH` is present, the + stash entry will be saved to the stash list. --continue:: After a 'git merge' stops due to conflicts you can conclude the diff --git a/Documentation/git-multi-pack-index.txt b/Documentation/git-multi-pack-index.txt index 642d9ac5b7..0c6619493c 100644 --- a/Documentation/git-multi-pack-index.txt +++ b/Documentation/git-multi-pack-index.txt @@ -56,6 +56,9 @@ repack:: file is created, rewrite the multi-pack-index to reference the new pack-file. A later run of 'git multi-pack-index expire' will delete the pack-files that were part of this batch. ++ +If `repack.packKeptObjects` is `false`, then any pack-files with an +associated `.keep` file will not be selected for the batch to repack. EXAMPLES diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index 3494a1db3e..dab9609013 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -374,14 +374,55 @@ These options can be used to modify 'git p4 submit' behavior. been submitted. Implies --disable-rebase. Can also be set with git-p4.disableP4Sync. Sync with origin/master still goes ahead if possible. -Hook for submit -~~~~~~~~~~~~~~~ +Hooks for submit +---------------- + +p4-pre-submit +~~~~~~~~~~~~~ + The `p4-pre-submit` hook is executed if it exists and is executable. The hook takes no parameters and nothing from standard input. Exiting with non-zero status from this script prevents `git-p4 submit` from launching. +It can be bypassed with the `--no-verify` command line option. One usage scenario is to run unit tests in the hook. +p4-prepare-changelist +~~~~~~~~~~~~~~~~~~~~~ + +The `p4-prepare-changelist` hook is executed right after preparing +the default changelist message and before the editor is started. +It takes one parameter, the name of the file that contains the +changelist text. Exiting with a non-zero status from the script +will abort the process. + +The purpose of the hook is to edit the message file in place, +and it is not supressed by the `--no-verify` option. This hook +is called even if `--prepare-p4-only` is set. + +p4-changelist +~~~~~~~~~~~~~ + +The `p4-changelist` hook is executed after the changelist +message has been edited by the user. It can be bypassed with the +`--no-verify` option. It takes a single parameter, the name +of the file that holds the proposed changelist text. Exiting +with a non-zero status causes the command to abort. + +The hook is allowed to edit the changelist file and can be used +to normalize the text into some project standard format. It can +also be used to refuse the Submit after inspect the message file. + +p4-post-changelist +~~~~~~~~~~~~~~~~~~ + +The `p4-post-changelist` hook is invoked after the submit has +successfully occured in P4. It takes no parameters and is meant +primarily for notification and cannot affect the outcome of the +git p4 submit action. + + + Rebase options ~~~~~~~~~~~~~~ These options can be used to modify 'git p4 rebase' behavior. diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index dfb901f8b8..5c3fb67c01 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -85,8 +85,9 @@ OPTIONS Pass --verbose to git-fetch and git-merge. --[no-]recurse-submodules[=yes|on-demand|no]:: - This option controls if new commits of all populated submodules should - be fetched and updated, too (see linkgit:git-config[1] and + This option controls if new commits of populated submodules should + be fetched, and if the working trees of active submodules should be + updated, too (see linkgit:git-fetch[1], linkgit:git-config[1] and linkgit:gitmodules[5]). + If the checkout is done via rebase, local submodule commits are rebased as well. @@ -133,15 +134,6 @@ unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: Override earlier --rebase. ---autostash:: ---no-autostash:: - Before starting rebase, stash local modifications away (see - linkgit:git-stash[1]) if needed, and apply the stash entry when - done. `--no-autostash` is useful to override the `rebase.autoStash` - configuration variable (see linkgit:git-config[1]). -+ -This option is only valid when "--rebase" is used. - Options related to fetching ~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -229,9 +221,9 @@ branch.<name>.merge options; see linkgit:git-config[1] for details. $ git pull origin next ------------------------------------------------ + -This leaves a copy of `next` temporarily in FETCH_HEAD, but -does not update any remote-tracking branches. Using remote-tracking -branches, the same can be done by invoking fetch and merge: +This leaves a copy of `next` temporarily in FETCH_HEAD, and +updates the remote-tracking branch `origin/next`. +The same can be done by invoking fetch and merge: + ------------------------------------------------ $ git fetch origin diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index da33f84f33..5fa8bab64c 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -116,9 +116,9 @@ OPTIONS located in. --[no-]recurse-submodules:: - Using --recurse-submodules will update the content of all initialized + Using --recurse-submodules will update the content of all active submodules according to the commit recorded in the superproject by - calling read-tree recursively, also setting the submodules HEAD to be + calling read-tree recursively, also setting the submodules' HEAD to be detached at that commit. --no-sparse-checkout:: diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index f7a6033607..4624cfd288 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -256,7 +256,8 @@ See also INCOMPATIBLE OPTIONS below. --quit:: Abort the rebase operation but HEAD is not reset back to the original branch. The index and working tree are also left - unchanged as a result. + unchanged as a result. If a temporary stash entry was created + using --autostash, it will be saved to the stash list. --apply: Use applying strategies to rebase (calling `git-am` @@ -277,20 +278,51 @@ See also INCOMPATIBLE OPTIONS below. Other options, like --exec, will use the default of drop unless -i/--interactive is explicitly specified. + -Note that commits which start empty are kept, and commits which are -clean cherry-picks (as determined by `git log --cherry-mark ...`) are -always dropped. +Note that commits which start empty are kept (unless --no-keep-empty +is specified), and commits which are clean cherry-picks (as determined +by `git log --cherry-mark ...`) are detected and dropped as a +preliminary step (unless --reapply-cherry-picks is passed). + See also INCOMPATIBLE OPTIONS below. +--no-keep-empty:: --keep-empty:: - No-op. Rebasing commits that started empty (had no change - relative to their parent) used to fail and this option would - override that behavior, allowing commits with empty changes to - be rebased. Now commits with no changes do not cause rebasing - to halt. + Do not keep commits that start empty before the rebase + (i.e. that do not change anything from its parent) in the + result. The default is to keep commits which start empty, + since creating such commits requires passing the --allow-empty + override flag to `git commit`, signifying that a user is very + intentionally creating such a commit and thus wants to keep + it. + -See also BEHAVIORAL DIFFERENCES and INCOMPATIBLE OPTIONS below. +Usage of this flag will probably be rare, since you can get rid of +commits that start empty by just firing up an interactive rebase and +removing the lines corresponding to the commits you don't want. This +flag exists as a convenient shortcut, such as for cases where external +tools generate many empty commits and you want them all removed. ++ +For commits which do not start empty but become empty after rebasing, +see the --empty flag. ++ +See also INCOMPATIBLE OPTIONS below. + +--reapply-cherry-picks:: +--no-reapply-cherry-picks:: + Reapply all clean cherry-picks of any upstream commit instead + of preemptively dropping them. (If these commits then become + empty after rebasing, because they contain a subset of already + upstream changes, the behavior towards them is controlled by + the `--empty` flag.) ++ +By default (or if `--no-reapply-cherry-picks` is given), these commits +will be automatically dropped. Because this necessitates reading all +upstream commits, this can be expensive in repos with a large number +of upstream commits that need to be read. ++ +`--reapply-cherry-picks` allows rebase to forgo reading all upstream +commits, potentially improving performance. ++ +See also INCOMPATIBLE OPTIONS below. --allow-empty-message:: No-op. Rebasing commits with an empty message used to fail @@ -354,9 +386,12 @@ See also INCOMPATIBLE OPTIONS below. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. -q:: --quiet:: @@ -414,12 +449,14 @@ When --fork-point is active, 'fork_point' will be used instead of <branch>` command (see linkgit:git-merge-base[1]). If 'fork_point' ends up being empty, the <upstream> will be used as a fallback. + -If either <upstream> or --root is given on the command line, then the -default is `--no-fork-point`, otherwise the default is `--fork-point`. +If <upstream> is given on the command line, then the default is +`--no-fork-point`, otherwise the default is `--fork-point`. + If your branch was based on <upstream> but <upstream> was rewound and your branch contains commits which were dropped, this option can be used with `--keep-base` in order to drop those commits from your branch. ++ +See also INCOMPATIBLE OPTIONS below. --ignore-whitespace:: --whitespace=<option>:: @@ -587,8 +624,9 @@ are incompatible with the following options: * --preserve-merges * --interactive * --exec - * --keep-empty + * --no-keep-empty * --empty= + * --reapply-cherry-picks * --edit-todo * --root when used in combination with --onto @@ -600,12 +638,13 @@ In addition, the following pairs of options are incompatible: * --preserve-merges and --empty= * --keep-base and --onto * --keep-base and --root + * --fork-point and --root BEHAVIORAL DIFFERENCES ----------------------- git rebase has two primary backends: apply and merge. (The apply -backend used to known as the 'am' backend, but the name led to +backend used to be known as the 'am' backend, but the name led to confusion as it looks like a verb instead of a noun. Also, the merge backend used to be known as the interactive backend, but it is now used for non-interactive cases as well. Both were renamed based on @@ -620,12 +659,15 @@ commits that started empty, though these are rare in practice. It also drops commits that become empty and has no option for controlling this behavior. -The merge backend keeps intentionally empty commits. Similar to the -apply backend, by default the merge backend drops commits that become -empty unless -i/--interactive is specified (in which case it stops and -asks the user what to do). The merge backend also has an ---empty={drop,keep,ask} option for changing the behavior of handling -commits that become empty. +The merge backend keeps intentionally empty commits by default (though +with -i they are marked as empty in the todo list editor, or they can +be dropped automatically with --no-keep-empty). + +Similar to the apply backend, by default the merge backend drops +commits that become empty unless -i/--interactive is specified (in +which case it stops and asks the user what to do). The merge backend +also has an --empty={drop,keep,ask} option for changing the behavior +of handling commits that become empty. Directory rename detection ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -684,9 +726,17 @@ Hooks ~~~~~ The apply backend has not traditionally called the post-commit hook, -while the merge backend has. However, this was by accident of -implementation rather than by design. Both backends should have the -same behavior, though it is not clear which one is correct. +while the merge backend has. Both have called the post-checkout hook, +though the merge backend has squelched its output. Further, both +backends only call the post-checkout hook with the starting point +commit of the rebase, not the intermediate commits nor the final +commit. In each case, the calling of these hooks was by accident of +implementation rather than by design (both backends were originally +implemented as shell scripts and happened to invoke other commands +like 'git checkout' or 'git commit' that would call the hooks). Both +backends should have the same behavior, though it is not entirely +clear which, if any, is correct. We will likely make rebase stop +calling either of these hooks in the future. Interruptability ~~~~~~~~~~~~~~~~ @@ -1002,7 +1052,8 @@ Only works if the changes (patch IDs based on the diff contents) on 'subsystem' did. In that case, the fix is easy because 'git rebase' knows to skip -changes that are already present in the new upstream. So if you say +changes that are already present in the new upstream (unless +`--reapply-cherry-picks` is given). So if you say (assuming you're on 'topic') ------------ $ git rebase subsystem diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 932080c55d..252e2d4e47 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -87,6 +87,12 @@ but carries forward unmerged index entries. different between `<commit>` and `HEAD`. If a file that is different between `<commit>` and `HEAD` has local changes, reset is aborted. + +--[no-]recurse-submodules:: + When the working tree is updated, using --recurse-submodules will + also recursively reset the working tree of all active submodules + according to the commit recorded in the superproject, also setting + the submodules' HEAD to be detached at that commit. -- See "Reset, restore and revert" in linkgit:git[1] for the differences diff --git a/Documentation/git-restore.txt b/Documentation/git-restore.txt index 5bf60d4943..84c6c40010 100644 --- a/Documentation/git-restore.txt +++ b/Documentation/git-restore.txt @@ -22,9 +22,8 @@ The command can also be used to restore the content in the index with `--staged`, or restore both the working tree and the index with `--staged --worktree`. -By default, the restore sources for working tree and the index are the -index and `HEAD` respectively. `--source` could be used to specify a -commit as the restore source. +By default, if `--staged` is given, the contents are restored from `HEAD`, +otherwise from the index. Use `--source` to restore from a different commit. See "Reset, restore and revert" in linkgit:git[1] for the differences between the three commands. @@ -39,10 +38,8 @@ OPTIONS tree. It is common to specify the source tree by naming a commit, branch or tag associated with it. + -If not specified, the default restore source for the working tree is -the index, and the default restore source for the index is -`HEAD`. When both `--staged` and `--worktree` are specified, -`--source` must also be specified. +If not specified, the contents are restored from `HEAD` if `--staged` is +given, otherwise from the index. -p:: --patch:: @@ -107,6 +104,17 @@ in linkgit:git-checkout[1] for details. patterns and unconditionally restores any files in `<pathspec>`. +--recurse-submodules:: +--no-recurse-submodules:: + If `<pathspec>` names an active submodule and the restore location + includes the working tree, the submodule will only be updated if + this option is given, in which case its working tree will be + restored to the commit recorded in the superproject, and any local + modifications overwritten. If nothing (or + `--no-recurse-submodules`) is used, submodules working trees will + not be updated. Just like linkgit:git-checkout[1], this will detach + `HEAD` of the submodule. + --overlay:: --no-overlay:: In overlay mode, the command never removes files when diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 9d22270757..044276e9da 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -90,9 +90,12 @@ effect to your index in a row. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. -s:: --signoff:: diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt index c0342e5393..1a3ace6082 100644 --- a/Documentation/git-sparse-checkout.txt +++ b/Documentation/git-sparse-checkout.txt @@ -70,6 +70,16 @@ C-style quoted strings. `core.sparseCheckoutCone` is enabled, the given patterns are interpreted as directory names as in the 'set' subcommand. +'reapply:: + Reapply the sparsity pattern rules to paths in the working tree. + Commands like merge or rebase can materialize paths to do their + work (e.g. in order to show you a conflict), and other + sparse-checkout commands might fail to sparsify an individual file + (e.g. because it has unstaged changes or conflicts). In such + cases, it can make sense to run `git sparse-checkout reapply` later + after cleaning up affected paths (e.g. resolving conflicts, undoing + or committing changes, etc.). + 'disable':: Disable the `core.sparseCheckout` config setting, and restore the working directory to include all files. Leaves the sparse-checkout diff --git a/Documentation/git-switch.txt b/Documentation/git-switch.txt index 197900363b..3759c3a265 100644 --- a/Documentation/git-switch.txt +++ b/Documentation/git-switch.txt @@ -181,9 +181,9 @@ name, the guessing is aborted. You can explicitly give a name with --recurse-submodules:: --no-recurse-submodules:: Using `--recurse-submodules` will update the content of all - initialized submodules according to the commit recorded in the + active submodules according to the commit recorded in the superproject. If nothing (or `--no-recurse-submodules`) is - used, the work trees of submodules will not be updated. Just + used, submodules working trees will not be updated. Just like linkgit:git-submodule[1], this will detach `HEAD` of the submodules. diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index 9671423117..3e737c2360 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -66,6 +66,10 @@ performs all modifications together. Specify commands of the form: delete SP <ref> [SP <oldvalue>] LF verify SP <ref> [SP <oldvalue>] LF option SP <opt> LF + start LF + prepare LF + commit LF + abort LF With `--create-reflog`, update-ref will create a reflog for each ref even if one would not ordinarily be created. @@ -83,6 +87,10 @@ quoting: delete SP <ref> NUL [<oldvalue>] NUL verify SP <ref> NUL [<oldvalue>] NUL option SP <opt> NUL + start NUL + prepare NUL + commit NUL + abort NUL In this format, use 40 "0" to specify a zero value, and use the empty string to specify a missing value. @@ -107,13 +115,31 @@ delete:: verify:: Verify <ref> against <oldvalue> but do not change it. If - <oldvalue> zero or missing, the ref must not exist. + <oldvalue> is zero or missing, the ref must not exist. option:: Modify behavior of the next command naming a <ref>. The only valid option is `no-deref` to avoid dereferencing a symbolic ref. +start:: + Start a transaction. In contrast to a non-transactional session, a + transaction will automatically abort if the session ends without an + explicit commit. + +prepare:: + Prepare to commit the transaction. This will create lock files for all + queued reference updates. If one reference could not be locked, the + transaction will be aborted. + +commit:: + Commit all reference updates queued for the transaction, ending the + transaction. + +abort:: + Abort the transaction, releasing all locks if the transaction is in + prepared state. + If all <ref>s can be locked with matching <oldvalue>s simultaneously, all modifications are performed. Otherwise, no modifications are performed. Note that while each individual diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 508fe713c4..2d0a03715b 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -824,6 +824,8 @@ patterns are available: - `java` suitable for source code in the Java language. +- `markdown` suitable for Markdown documents. + - `matlab` suitable for source code in the MATLAB and Octave languages. - `objc` suitable for source code in the Objective-C language. diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index 1814d2d23c..9e481aec85 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -216,20 +216,26 @@ Here are some example specifications: ---------------------------------------------------- # run "git credential-foo" -foo +[credential] + helper = foo # same as above, but pass an argument to the helper -foo --bar=baz +[credential] + helper = "foo --bar=baz" # the arguments are parsed by the shell, so use shell # quoting if necessary -foo --bar="whitespace arg" +[credential] + helper = "foo --bar='whitespace arg'" # you can also use an absolute path, which will not use the git wrapper -/path/to/my/helper --with-arguments +[credential] + helper = "/path/to/my/helper --with-arguments" # or you can specify your own shell snippet -!f() { echo "password=`cat $HOME/.secret`"; }; f +[credential "https://example.com"] + username = your_user + helper = "!f() { test \"$1\" = get && echo \"password=$(cat $HOME/.secret)\"; }; f" ---------------------------------------------------- Generally speaking, rule (3) above is the simplest for users to specify. @@ -262,16 +268,26 @@ For a `get` operation, the helper should produce a list of attributes on stdout in the same format (see linkgit:git-credential[1] for common attributes). A helper is free to produce a subset, or even no values at all if it has nothing useful to provide. Any provided attributes will -overwrite those already known about by Git. If a helper outputs a -`quit` attribute with a value of `true` or `1`, no further helpers will -be consulted, nor will the user be prompted (if no credential has been -provided, the operation will then fail). +overwrite those already known about by Git's credential subsystem. + +While it is possible to override all attributes, well behaving helpers +should refrain from doing so for any attribute other than username and +password. + +If a helper outputs a `quit` attribute with a value of `true` or `1`, +no further helpers will be consulted, nor will the user be prompted +(if no credential has been provided, the operation will then fail). + +Similarly, no more helpers will be consulted once both username and +password had been provided. For a `store` or `erase` operation, the helper's output is ignored. -If it fails to perform the requested operation, it may complain to -stderr to inform the user. If it does not support the requested -operation (e.g., a read-only store), it should silently ignore the -request. + +If a helper fails to perform the requested operation or needs to notify +the user of a potential issue, it may write to stderr. + +If it does not support the requested operation (e.g., a read-only store), +it should silently ignore the request. If a helper receives any other operation, it should silently ignore the request. This leaves room for future operations to be added (older diff --git a/Documentation/gitfaq.txt b/Documentation/gitfaq.txt new file mode 100644 index 0000000000..370d62dae4 --- /dev/null +++ b/Documentation/gitfaq.txt @@ -0,0 +1,355 @@ +gitfaq(7) +========= + +NAME +---- +gitfaq - Frequently asked questions about using Git + +SYNOPSIS +-------- +gitfaq + +DESCRIPTION +----------- + +The examples in this FAQ assume a standard POSIX shell, like `bash` or `dash`, +and a user, A U Thor, who has the account `author` on the hosting provider +`git.example.org`. + +Configuration +------------- + +[[user-name]] +What should I put in `user.name`?:: + You should put your personal name, generally a form using a given name + and family name. For example, the current maintainer of Git uses "Junio + C Hamano". This will be the name portion that is stored in every commit + you make. ++ +This configuration doesn't have any effect on authenticating to remote services; +for that, see `credential.username` in linkgit:git-config[1]. + +[[http-postbuffer]] +What does `http.postBuffer` really do?:: + This option changes the size of the buffer that Git uses when pushing + data to a remote over HTTP or HTTPS. If the data is larger than this + size, libcurl, which handles the HTTP support for Git, will use chunked + transfer encoding since it isn't known ahead of time what the size of + the pushed data will be. ++ +Leaving this value at the default size is fine unless you know that either the +remote server or a proxy in the middle doesn't support HTTP/1.1 (which +introduced the chunked transfer encoding) or is known to be broken with chunked +data. This is often (erroneously) suggested as a solution for generic push +problems, but since almost every server and proxy supports at least HTTP/1.1, +raising this value usually doesn't solve most push problems. A server or proxy +that didn't correctly support HTTP/1.1 and chunked transfer encoding wouldn't be +that useful on the Internet today, since it would break lots of traffic. ++ +Note that increasing this value will increase the memory used on every relevant +push that Git does over HTTP or HTTPS, since the entire buffer is allocated +regardless of whether or not it is all used. Thus, it's best to leave it at the +default unless you are sure you need a different value. + +[[configure-editor]] +How do I configure a different editor?:: + If you haven't specified an editor specifically for Git, it will by default + use the editor you've configured using the `VISUAL` or `EDITOR` environment + variables, or if neither is specified, the system default (which is usually + `vi`). Since some people find `vi` difficult to use or prefer a different + editor, it may be desirable to change the editor used. ++ +If you want to configure a general editor for most programs which need one, you +can edit your shell configuration (e.g., `~/.bashrc` or `~/.zshenv`) to contain +a line setting the `EDITOR` or `VISUAL` environment variable to an appropriate +value. For example, if you prefer the editor `nano`, then you could write the +following: ++ +---- +export VISUAL=nano +---- ++ +If you want to configure an editor specifically for Git, you can either set the +`core.editor` configuration value or the `GIT_EDITOR` environment variable. You +can see linkgit:git-var[1] for details on the order in which these options are +consulted. ++ +Note that in all cases, the editor value will be passed to the shell, so any +arguments containing spaces should be appropriately quoted. Additionally, if +your editor normally detaches from the terminal when invoked, you should specify +it with an argument that makes it not do that, or else Git will not see any +changes. An example of a configuration addressing both of these issues on +Windows would be the configuration `"C:\Program Files\Vim\gvim.exe" --nofork`, +which quotes the filename with spaces and specifies the `--nofork` option to +avoid backgrounding the process. + +Credentials +----------- + +[[http-credentials]] +How do I specify my credentials when pushing over HTTP?:: + The easiest way to do this is to use a credential helper via the + `credential.helper` configuration. Most systems provide a standard + choice to integrate with the system credential manager. For example, + Git for Windows provides the `wincred` credential manager, macOS has the + `osxkeychain` credential manager, and Unix systems with a standard + desktop environment can use the `libsecret` credential manager. All of + these store credentials in an encrypted store to keep your passwords or + tokens secure. ++ +In addition, you can use the `store` credential manager which stores in a file +in your home directory, or the `cache` credential manager, which does not +permanently store your credentials, but does prevent you from being prompted for +them for a certain period of time. ++ +You can also just enter your password when prompted. While it is possible to +place the password (which must be percent-encoded) in the URL, this is not +particularly secure and can lead to accidental exposure of credentials, so it is +not recommended. + +[[http-credentials-environment]] +How do I read a password or token from an environment variable?:: + The `credential.helper` configuration option can also take an arbitrary + shell command that produces the credential protocol on standard output. + This is useful when passing credentials into a container, for example. ++ +Such a shell command can be specified by starting the option value with an +exclamation point. If your password or token were stored in the `GIT_TOKEN`, +you could run the following command to set your credential helper: ++ +---- +$ git config credential.helper \ + '!f() { echo username=author; echo "password=$GIT_TOKEN"; };f' +---- + +[[http-reset-credentials]] +How do I change the password or token I've saved in my credential manager?:: + Usually, if the password or token is invalid, Git will erase it and + prompt for a new one. However, there are times when this doesn't always + happen. To change the password or token, you can erase the existing + credentials and then Git will prompt for new ones. To erase + credentials, use a syntax like the following (substituting your username + and the hostname): ++ +---- +$ echo url=https://author@git.example.org | git credential reject +---- + +[[multiple-accounts-http]] +How do I use multiple accounts with the same hosting provider using HTTP?:: + Usually the easiest way to distinguish between these accounts is to use + the username in the URL. For example, if you have the accounts `author` + and `committer` on `git.example.org`, you can use the URLs + https://author@git.example.org/org1/project1.git and + https://committer@git.example.org/org2/project2.git. This way, when you + use a credential helper, it will automatically try to look up the + correct credentials for your account. If you already have a remote set + up, you can change the URL with something like `git remote set-url + origin https://author@git.example.org/org1/project1.git` (see + linkgit:git-remote[1] for details). + +[[multiple-accounts-ssh]] +How do I use multiple accounts with the same hosting provider using SSH?:: + With most hosting providers that support SSH, a single key pair uniquely + identifies a user. Therefore, to use multiple accounts, it's necessary + to create a key pair for each account. If you're using a reasonably + modern OpenSSH version, you can create a new key pair with something + like `ssh-keygen -t ed25519 -f ~/.ssh/id_committer`. You can then + register the public key (in this case, `~/.ssh/id_committer.pub`; note + the `.pub`) with the hosting provider. ++ +Most hosting providers use a single SSH account for pushing; that is, all users +push to the `git` account (e.g., `git@git.example.org`). If that's the case for +your provider, you can set up multiple aliases in SSH to make it clear which key +pair to use. For example, you could write something like the following in +`~/.ssh/config`, substituting the proper private key file: ++ +---- +# This is the account for author on git.example.org. +Host example_author + HostName git.example.org + User git + # This is the key pair registered for author with git.example.org. + IdentityFile ~/.ssh/id_author + IdentitiesOnly yes +# This is the account for committer on git.example.org. +Host example_committer + HostName git.example.org + User git + # This is the key pair registered for committer with git.example.org. + IdentityFile ~/.ssh/id_committer + IdentitiesOnly yes +---- ++ +Then, you can adjust your push URL to use `git@example_author` or +`git@example_committer` instead of `git@example.org` (e.g., `git remote set-url +git@example_author:org1/project1.git`). + +Common Issues +------------- + +[[last-commit-amend]] +I've made a mistake in the last commit. How do I change it?:: + You can make the appropriate change to your working tree, run `git add + <file>` or `git rm <file>`, as appropriate, to stage it, and then `git + commit --amend`. Your change will be included in the commit, and you'll + be prompted to edit the commit message again; if you wish to use the + original message verbatim, you can use the `--no-edit` option to `git + commit` in addition, or just save and quit when your editor opens. + +[[undo-previous-change]] +I've made a change with a bug and it's been included in the main branch. How should I undo it?:: + The usual way to deal with this is to use `git revert`. This preserves + the history that the original change was made and was a valuable + contribution, but also introduces a new commit that undoes those changes + because the original had a problem. The commit message of the revert + indicates the commit which was reverted and is usually edited to include + an explanation as to why the revert was made. + +[[ignore-tracked-files]] +How do I ignore changes to a tracked file?:: + Git doesn't provide a way to do this. The reason is that if Git needs + to overwrite this file, such as during a checkout, it doesn't know + whether the changes to the file are precious and should be kept, or + whether they are irrelevant and can safely be destroyed. Therefore, it + has to take the safe route and always preserve them. ++ +It's tempting to try to use certain features of `git update-index`, namely the +assume-unchanged and skip-worktree bits, but these don't work properly for this +purpose and shouldn't be used this way. ++ +If your goal is to modify a configuration file, it can often be helpful to have +a file checked into the repository which is a template or set of defaults which +can then be copied alongside and modified as appropriate. This second, modified +file is usually ignored to prevent accidentally committing it. + +[[files-in-.gitignore-are-tracked]] +I asked Git to ignore various files, yet they are still tracked:: + A `gitignore` file ensures that certain file(s) which are not + tracked by Git remain untracked. However, sometimes particular + file(s) may have been tracked before adding them into the + `.gitignore`, hence they still remain tracked. To untrack and + ignore files/patterns, use `git rm --cached <file/pattern>` + and add a pattern to `.gitignore` that matches the <file>. + See linkgit:gitignore[5] for details. + +[[fetching-and-pulling]] +How do I know if I want to do a fetch or a pull?:: + A fetch stores a copy of the latest changes from the remote + repository, without modifying the working tree or current branch. + You can then at your leisure inspect, merge, rebase on top of, or + ignore the upstream changes. A pull consists of a fetch followed + immediately by either a merge or rebase. See linkgit:git-pull[1]. + +Hooks +----- + +[[restrict-with-hooks]] +How do I use hooks to prevent users from making certain changes?:: + The only safe place to make these changes is on the remote repository + (i.e., the Git server), usually in the `pre-receive` hook or in a + continuous integration (CI) system. These are the locations in which + policy can be enforced effectively. ++ +It's common to try to use `pre-commit` hooks (or, for commit messages, +`commit-msg` hooks) to check these things, which is great if you're working as a +solo developer and want the tooling to help you. However, using hooks on a +developer machine is not effective as a policy control because a user can bypass +these hooks with `--no-verify` without being noticed (among various other ways). +Git assumes that the user is in control of their local repositories and doesn't +try to prevent this or tattle on the user. ++ +In addition, some advanced users find `pre-commit` hooks to be an impediment to +workflows that use temporary commits to stage work in progress or that create +fixup commits, so it's better to push these kinds of checks to the server +anyway. + +Cross-Platform Issues +--------------------- + +[[windows-text-binary]] +I'm on Windows and my text files are detected as binary.:: + Git works best when you store text files as UTF-8. Many programs on + Windows support UTF-8, but some do not and only use the little-endian + UTF-16 format, which Git detects as binary. If you can't use UTF-8 with + your programs, you can specify a working tree encoding that indicates + which encoding your files should be checked out with, while still + storing these files as UTF-8 in the repository. This allows tools like + linkgit:git-diff[1] to work as expected, while still allowing your tools + to work. ++ +To do so, you can specify a linkgit:gitattributes[5] pattern with the +`working-tree-encoding` attribute. For example, the following pattern sets all +C files to use UTF-16LE-BOM, which is a common encoding on Windows: ++ +---- +*.c working-tree-encoding=UTF-16LE-BOM +---- ++ +You will need to run `git add --renormalize` to have this take effect. Note +that if you are making these changes on a project that is used across platforms, +you'll probably want to make it in a per-user configuration file or in the one +in `$GIT_DIR/info/attributes`, since making it in a `.gitattributes` file in the +repository will apply to all users of the repository. ++ +See the following entry for information about normalizing line endings as well, +and see linkgit:gitattributes[5] for more information about attribute files. + +[[windows-diff-control-m]] +I'm on Windows and git diff shows my files as having a `^M` at the end.:: + By default, Git expects files to be stored with Unix line endings. As such, + the carriage return (`^M`) that is part of a Windows line ending is shown + because it is considered to be trailing whitespace. Git defaults to showing + trailing whitespace only on new lines, not existing ones. ++ +You can store the files in the repository with Unix line endings and convert +them automatically to your platform's line endings. To do that, set the +configuration option `core.eol` to `native` and see the following entry for +information about how to configure files as text or binary. ++ +You can also control this behavior with the `core.whitespace` setting if you +don't wish to remove the carriage returns from your line endings. + +[[recommended-storage-settings]] +What's the recommended way to store files in Git?:: + While Git can store and handle any file of any type, there are some + settings that work better than others. In general, we recommend that + text files be stored in UTF-8 without a byte-order mark (BOM) with LF + (Unix-style) endings. We also recommend the use of UTF-8 (again, + without BOM) in commit messages. These are the settings that work best + across platforms and with tools such as `git diff` and `git merge`. ++ +Additionally, if you have a choice between storage formats that are text based +or non-text based, we recommend storing files in the text format and, if +necessary, transforming them into the other format. For example, a text-based +SQL dump with one record per line will work much better for diffing and merging +than an actual database file. Similarly, text-based formats such as Markdown +and AsciiDoc will work better than binary formats such as Microsoft Word and +PDF. ++ +Similarly, storing binary dependencies (e.g., shared libraries or JAR files) or +build products in the repository is generally not recommended. Dependencies and +build products are best stored on an artifact or package server with only +references, URLs, and hashes stored in the repository. ++ +We also recommend setting a linkgit:gitattributes[5] file to explicitly mark +which files are text and which are binary. If you want Git to guess, you can +set the attribute `text=auto`. For example, the following might be appropriate +in some projects: ++ +---- +# By default, guess. +* text=auto +# Mark all C files as text. +*.c text +# Mark all JPEG files as binary. +*.jpg binary +---- ++ +These settings help tools pick the right format for output such as patches and +result in files being checked out in the appropriate line ending for the +platform. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 3dccab5375..81f2a87e88 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -522,12 +522,61 @@ The exit status determines whether git will use the data from the hook to limit its search. On error, it will fall back to verifying all files and folders. +p4-changelist +~~~~~~~~~~~~~ + +This hook is invoked by `git-p4 submit`. + +The `p4-changelist` hook is executed after the changelist +message has been edited by the user. It can be bypassed with the +`--no-verify` option. It takes a single parameter, the name +of the file that holds the proposed changelist text. Exiting +with a non-zero status causes the command to abort. + +The hook is allowed to edit the changelist file and can be used +to normalize the text into some project standard format. It can +also be used to refuse the Submit after inspect the message file. + +Run `git-p4 submit --help` for details. + +p4-prepare-changelist +~~~~~~~~~~~~~~~~~~~~~ + +This hook is invoked by `git-p4 submit`. + +The `p4-prepare-changelist` hook is executed right after preparing +the default changelist message and before the editor is started. +It takes one parameter, the name of the file that contains the +changelist text. Exiting with a non-zero status from the script +will abort the process. + +The purpose of the hook is to edit the message file in place, +and it is not supressed by the `--no-verify` option. This hook +is called even if `--prepare-p4-only` is set. + +Run `git-p4 submit --help` for details. + +p4-post-changelist +~~~~~~~~~~~~~~~~~~ + +This hook is invoked by `git-p4 submit`. + +The `p4-post-changelist` hook is invoked after the submit has +successfully occured in P4. It takes no parameters and is meant +primarily for notification and cannot affect the outcome of the +git p4 submit action. + +Run `git-p4 submit --help` for details. + p4-pre-submit ~~~~~~~~~~~~~ This hook is invoked by `git-p4 submit`. It takes no parameters and nothing from standard input. Exiting with non-zero status from this script prevent -`git-p4 submit` from launching. Run `git-p4 submit --help` for details. +`git-p4 submit` from launching. It can be bypassed with the `--no-verify` +command line option. Run `git-p4 submit --help` for details. + + post-index-change ~~~~~~~~~~~~~~~~~ diff --git a/Documentation/gitsubmodules.txt b/Documentation/gitsubmodules.txt index c476f891b5..f9f4e65c9e 100644 --- a/Documentation/gitsubmodules.txt +++ b/Documentation/gitsubmodules.txt @@ -271,7 +271,8 @@ will not be checked out by default; You can instruct 'clone' to recurse into submodules. The 'init' and 'update' subcommands of 'git submodule' will maintain submodules checked out and at an appropriate revision in your working tree. Alternatively you can set 'submodule.recurse' to have -'checkout' recursing into submodules. +'checkout' recursing into submodules (note that 'submodule.recurse' also +affects other git commands, see linkgit:git-config[1] for a complete list). SEE ALSO diff --git a/Documentation/manpage-1.72.xsl b/Documentation/manpage-1.72.xsl deleted file mode 100644 index b4d315cb8c..0000000000 --- a/Documentation/manpage-1.72.xsl +++ /dev/null @@ -1,14 +0,0 @@ -<!-- manpage-1.72.xsl: - special settings for manpages rendered from asciidoc+docbook - handles peculiarities in docbook-xsl 1.72.0 --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<xsl:import href="manpage-base.xsl"/> - -<!-- these are the special values for the roff control characters - needed for docbook-xsl 1.72.0 --> -<xsl:param name="git.docbook.backslash">▓</xsl:param> -<xsl:param name="git.docbook.dot" >⌂</xsl:param> - -</xsl:stylesheet> diff --git a/Documentation/manpage-base.xsl b/Documentation/manpage-base.xsl deleted file mode 100644 index a264fa6160..0000000000 --- a/Documentation/manpage-base.xsl +++ /dev/null @@ -1,35 +0,0 @@ -<!-- manpage-base.xsl: - special formatting for manpages rendered from asciidoc+docbook --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<!-- these params silence some output from xmlto --> -<xsl:param name="man.output.quietly" select="1"/> -<xsl:param name="refentry.meta.get.quietly" select="1"/> - -<!-- convert asciidoc callouts to man page format; - git.docbook.backslash and git.docbook.dot params - must be supplied by another XSL file or other means --> -<xsl:template match="co"> - <xsl:value-of select="concat( - $git.docbook.backslash,'fB(', - substring-after(@id,'-'),')', - $git.docbook.backslash,'fR')"/> -</xsl:template> -<xsl:template match="calloutlist"> - <xsl:value-of select="$git.docbook.dot"/> - <xsl:text>sp </xsl:text> - <xsl:apply-templates/> - <xsl:text> </xsl:text> -</xsl:template> -<xsl:template match="callout"> - <xsl:value-of select="concat( - $git.docbook.backslash,'fB', - substring-after(@arearefs,'-'), - '. ',$git.docbook.backslash,'fR')"/> - <xsl:apply-templates/> - <xsl:value-of select="$git.docbook.dot"/> - <xsl:text>br </xsl:text> -</xsl:template> - -</xsl:stylesheet> diff --git a/Documentation/manpage-bold-literal.xsl b/Documentation/manpage-bold-literal.xsl index 94d6c1b545..e13db85693 100644 --- a/Documentation/manpage-bold-literal.xsl +++ b/Documentation/manpage-bold-literal.xsl @@ -8,11 +8,9 @@ this makes literal text easier to distinguish in manpages viewed on a tty --> <xsl:template match="literal|d:literal"> - <xsl:value-of select="$git.docbook.backslash"/> - <xsl:text>fB</xsl:text> + <xsl:text>\fB</xsl:text> <xsl:apply-templates/> - <xsl:value-of select="$git.docbook.backslash"/> - <xsl:text>fR</xsl:text> + <xsl:text>\fR</xsl:text> </xsl:template> </xsl:stylesheet> diff --git a/Documentation/manpage-normal.xsl b/Documentation/manpage-normal.xsl index a48f5b11f3..a9c7ec69f4 100644 --- a/Documentation/manpage-normal.xsl +++ b/Documentation/manpage-normal.xsl @@ -1,13 +1,26 @@ <!-- manpage-normal.xsl: - special settings for manpages rendered from asciidoc+docbook - handles anything we want to keep away from docbook-xsl 1.72.0 --> + special settings for manpages rendered from asciidoc+docbook --> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> -<xsl:import href="manpage-base.xsl"/> -<!-- these are the normal values for the roff control characters --> -<xsl:param name="git.docbook.backslash">\</xsl:param> -<xsl:param name="git.docbook.dot" >.</xsl:param> +<!-- these params silence some output from xmlto --> +<xsl:param name="man.output.quietly" select="1"/> +<xsl:param name="refentry.meta.get.quietly" select="1"/> + +<!-- convert asciidoc callouts to man page format --> +<xsl:template match="co"> + <xsl:value-of select="concat('\fB(',substring-after(@id,'-'),')\fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:text>.sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat('\fB',substring-after(@arearefs,'-'),'. \fR')"/> + <xsl:apply-templates/> + <xsl:text>.br </xsl:text> +</xsl:template> </xsl:stylesheet> diff --git a/Documentation/manpage-suppress-sp.xsl b/Documentation/manpage-suppress-sp.xsl deleted file mode 100644 index a63c7632a8..0000000000 --- a/Documentation/manpage-suppress-sp.xsl +++ /dev/null @@ -1,21 +0,0 @@ -<!-- manpage-suppress-sp.xsl: - special settings for manpages rendered from asciidoc+docbook - handles erroneous, inline .sp in manpage output of some - versions of docbook-xsl --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<!-- attempt to work around spurious .sp at the tail of the line - that some versions of docbook stylesheets seem to add --> -<xsl:template match="simpara"> - <xsl:variable name="content"> - <xsl:apply-templates/> - </xsl:variable> - <xsl:value-of select="normalize-space($content)"/> - <xsl:if test="not(ancestor::authorblurb) and - not(ancestor::personblurb)"> - <xsl:text> </xsl:text> - </xsl:if> -</xsl:template> - -</xsl:stylesheet> diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 40dc4f5e8c..80d4831662 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -61,9 +61,12 @@ When not possible, refuse to merge and exit with a non-zero status. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign the resulting merge commit. The `keyid` argument is optional and defaults to the committer identity; if specified, - it must be stuck to the option without a space. + it must be stuck to the option without a space. `--no-gpg-sign` + is useful to countermand both `commit.gpgSign` configuration variable, + and earlier `--gpg-sign`. --log[=<n>]:: --no-log:: @@ -157,6 +160,14 @@ ifndef::git-pull[] endif::git-pull[] +--autostash:: +--no-autostash:: + Automatically create a temporary stash entry before the operation + begins, and apply it after the operation ends. This means + that you can run the operation on a dirty worktree. However, use + with care: the final stash application after a successful + merge might result in non-trivial conflicts. + --allow-unrelated-histories:: By default, `git merge` command refuses to merge histories that do not share a common ancestor. This option can be diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index a4b6f49186..547a552463 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -83,6 +83,12 @@ placeholders, its output is not affected by other options like <full commit message> +* 'mboxrd' ++ +Like 'email', but lines in the commit message starting with "From " +(preceded by zero or more ">") are quoted with ">" so they aren't +confused as starting a new commit. + * 'raw' + The 'raw' format shows the entire commit exactly as diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index 7d3a60f5b9..95ea849902 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -19,7 +19,8 @@ ifndef::git-pull[] (see <<CRTB,CONFIGURED REMOTE-TRACKING BRANCHES>> below). endif::git-pull[] ifdef::git-pull[] - (see linkgit:git-fetch[1]). + (see the section "CONFIGURED REMOTE-TRACKING BRANCHES" + in linkgit:git-fetch[1]). endif::git-pull[] + The format of a <refspec> parameter is an optional plus diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index bfd02ade99..04ad7dd36e 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -342,6 +342,12 @@ Default mode:: branches if the end result is the same (i.e. merging branches with the same content) +--show-pulls:: + Include all commits from the default mode, but also any merge + commits that are not TREESAME to the first parent but are + TREESAME to a later parent. This mode is helpful for showing + the merge commits that "first introduced" a change to a branch. + --full-history:: Same as the default mode, but does not prune some history. @@ -534,7 +540,7 @@ Note the major differences in `N`, `P`, and `Q` over `--full-history`: parent and is TREESAME. -- -Finally, there is a fifth simplification mode available: +There is another simplification mode available: --ancestry-path:: Limit the displayed commits to those directly on the ancestry @@ -573,6 +579,132 @@ option does. Applied to the 'D..M' range, it results in: L--M ----------------------------------------------------------------------- +Before discussing another option, `--show-pulls`, we need to +create a new example history. ++ +A common problem users face when looking at simplified history is that a +commit they know changed a file somehow does not appear in the file's +simplified history. Let's demonstrate a new example and show how options +such as `--full-history` and `--simplify-merges` works in that case: ++ +----------------------------------------------------------------------- + .-A---M-----C--N---O---P + / / \ \ \/ / / + I B \ R-'`-Z' / + \ / \/ / + \ / /\ / + `---X--' `---Y--' +----------------------------------------------------------------------- ++ +For this example, suppose `I` created `file.txt` which was modified by +`A`, `B`, and `X` in different ways. The single-parent commits `C`, `Z`, +and `Y` do not change `file.txt`. The merge commit `M` was created by +resolving the merge conflict to include both changes from `A` and `B` +and hence is not TREESAME to either. The merge commit `R`, however, was +created by ignoring the contents of `file.txt` at `M` and taking only +the contents of `file.txt` at `X`. Hence, `R` is TREESAME to `X` but not +`M`. Finally, the natural merge resolution to create `N` is to take the +contents of `file.txt` at `R`, so `N` is TREESAME to `R` but not `C`. +The merge commits `O` and `P` are TREESAME to their first parents, but +not to their second parents, `Z` and `Y` respectively. ++ +When using the default mode, `N` and `R` both have a TREESAME parent, so +those edges are walked and the others are ignored. The resulting history +graph is: ++ +----------------------------------------------------------------------- + I---X +----------------------------------------------------------------------- ++ +When using `--full-history`, Git walks every edge. This will discover +the commits `A` and `B` and the merge `M`, but also will reveal the +merge commits `O` and `P`. With parent rewriting, the resulting graph is: ++ +----------------------------------------------------------------------- + .-A---M--------N---O---P + / / \ \ \/ / / + I B \ R-'`--' / + \ / \/ / + \ / /\ / + `---X--' `------' +----------------------------------------------------------------------- ++ +Here, the merge commits `O` and `P` contribute extra noise, as they did +not actually contribute a change to `file.txt`. They only merged a topic +that was based on an older version of `file.txt`. This is a common +issue in repositories using a workflow where many contributors work in +parallel and merge their topic branches along a single trunk: manu +unrelated merges appear in the `--full-history` results. ++ +When using the `--simplify-merges` option, the commits `O` and `P` +disappear from the results. This is because the rewritten second parents +of `O` and `P` are reachable from their first parents. Those edges are +removed and then the commits look like single-parent commits that are +TREESAME to their parent. This also happens to the commit `N`, resulting +in a history view as follows: ++ +----------------------------------------------------------------------- + .-A---M--. + / / \ + I B R + \ / / + \ / / + `---X--' +----------------------------------------------------------------------- ++ +In this view, we see all of the important single-parent changes from +`A`, `B`, and `X`. We also see the carefully-resolved merge `M` and the +not-so-carefully-resolved merge `R`. This is usually enough information +to determine why the commits `A` and `B` "disappeared" from history in +the default view. However, there are a few issues with this approach. ++ +The first issue is performance. Unlike any previous option, the +`--simplify-merges` option requires walking the entire commit history +before returning a single result. This can make the option difficult to +use for very large repositories. ++ +The second issue is one of auditing. When many contributors are working +on the same repository, it is important which merge commits introduced +a change into an important branch. The problematic merge `R` above is +not likely to be the merge commit that was used to merge into an +important branch. Instead, the merge `N` was used to merge `R` and `X` +into the important branch. This commit may have information about why +the change `X` came to override the changes from `A` and `B` in its +commit message. ++ +The `--show-pulls` option helps with both of these issues by adding more +merge commits to the history results. If a merge is not TREESAME to its +first parent but is TREESAME to a later parent, then that merge is +treated as if it "pulled" the change from another branch. When using +`--show-pulls` on this example (and no other options) the resulting +graph is: ++ +----------------------------------------------------------------------- + I---X---R---N +----------------------------------------------------------------------- ++ +Here, the merge commits `R` and `N` are included because they pulled +the commits `X` and `R` into the base branch, respectively. These +merges are the reason the commits `A` and `B` do not appear in the +default history. ++ +When `--show-pulls` is paired with `--simplify-merges`, the +graph includes all of the necessary information: ++ +----------------------------------------------------------------------- + .-A---M--. N + / / \ / + I B R + \ / / + \ / / + `---X--' +----------------------------------------------------------------------- ++ +Notice that since `M` is reachable from `R`, the edge from `N` to `M` +was simplified away. However, `N` still appears in the history as an +important commit because it "pulled" the change `R` into the main +branch. + The `--simplify-by-decoration` option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index 97f995e5a9..1ad95065c1 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -233,7 +233,7 @@ G H I J A = = A^0 B = A^ = A^1 = A~1 - C = A^2 = A^2 + C = = A^2 D = A^^ = A^1^1 = A~2 E = B^2 = A^^2 F = B^3 = A^^3 diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt index 4f07ceadcb..6b6085585d 100644 --- a/Documentation/technical/api-trace2.txt +++ b/Documentation/technical/api-trace2.txt @@ -656,7 +656,8 @@ The "exec_id" field is a command-unique id and is only useful if the ------------ `"def_param"`:: - This event is generated to log a global parameter. + This event is generated to log a global parameter, such as a config + setting, command-line flag, or environment variable. + ------------ { diff --git a/Documentation/technical/commit-graph-format.txt b/Documentation/technical/commit-graph-format.txt index de56f9f1ef..1beef17182 100644 --- a/Documentation/technical/commit-graph-format.txt +++ b/Documentation/technical/commit-graph-format.txt @@ -97,10 +97,10 @@ CHUNK DATA: bit on. The other bits correspond to the position of the last parent. Bloom Filter Index (ID: {'B', 'I', 'D', 'X'}) (N * 4 bytes) [Optional] - * The ith entry, BIDX[i], stores the number of 8-byte word blocks in all - Bloom filters from commit 0 to commit i (inclusive) in lexicographic - order. The Bloom filter for the i-th commit spans from BIDX[i-1] to - BIDX[i] (plus header length), where BIDX[-1] is 0. + * The ith entry, BIDX[i], stores the number of bytes in all Bloom filters + from commit 0 to commit i (inclusive) in lexicographic order. The Bloom + filter for the i-th commit spans from BIDX[i-1] to BIDX[i] (plus header + length), where BIDX[-1] is 0. * The BIDX chunk is ignored if the BDAT chunk is not present. Bloom Filter Data (ID: {'B', 'D', 'A', 'T'}) [Optional] diff --git a/Documentation/user-manual.conf b/Documentation/user-manual.conf index d87294de2f..0148f126dc 100644 --- a/Documentation/user-manual.conf +++ b/Documentation/user-manual.conf @@ -9,13 +9,3 @@ tilde=~ [linkgit-inlinemacro] <ulink url="{target}.html">{target}{0?({0})}</ulink> - -ifdef::backend-docbook[] -# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. -[listingblock] -<example><title>{title}</title> -<literallayout class="monospaced"> -| -</literallayout> -{title#}</example> -endif::backend-docbook[] |