2 files changed, 171 insertions, 0 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 4ae9ba5c86..b105775acd 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -77,6 +77,7 @@ TECH_DOCS += technical/pack-heuristics
 TECH_DOCS += technical/pack-protocol
 TECH_DOCS += technical/protocol-capabilities
 TECH_DOCS += technical/protocol-common
+TECH_DOCS += technical/protocol-v2
 TECH_DOCS += technical/racy-git
 TECH_DOCS += technical/send-pack-pipeline
 TECH_DOCS += technical/shallow
diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt
new file mode 100644
index 0000000000..270b28f364
--- /dev/null
+++ b/Documentation/technical/protocol-v2.txt
@@ -0,0 +1,170 @@
+ Git Wire Protocol, Version 2
+==============================
+
+This document presents a specification for a version 2 of Git's wire
+protocol.  Protocol v2 will improve upon v1 in the following ways:
+
+  * Instead of multiple service names, multiple commands will be
+    supported by a single service
+  * Easily extendable as capabilities are moved into their own section
+    of the protocol, no longer being hidden behind a NUL byte and
+    limited by the size of a pkt-line
+  * Separate out other information hidden behind NUL bytes (e.g. agent
+    string as a capability and symrefs can be requested using 'ls-refs')
+  * Reference advertisement will be omitted unless explicitly requested
+  * ls-refs command to explicitly request some refs
+  * Designed with http and stateless-rpc in mind.  With clear flush
+    semantics the http remote helper can simply act as a proxy
+
+In protocol v2 communication is command oriented.  When first contacting a
+server a list of capabilities will advertised.  Some of these capabilities
+will be commands which a client can request be executed.  Once a command
+has completed, a client can reuse the connection and request that other
+commands be executed.
+
+ Packet-Line Framing
+---------------------
+
+All communication is done using packet-line framing, just as in v1.  See
+`Documentation/technical/pack-protocol.txt` and
+`Documentation/technical/protocol-common.txt` for more information.
+
+In protocol v2 these special packets will have the following semantics:
+
+  * '0000' Flush Packet (flush-pkt) - indicates the end of a message
+  * '0001' Delimiter Packet (delim-pkt) - separates sections of a message
+
+ Initial Client Request
+------------------------
+
+In general a client can request to speak protocol v2 by sending
+`version=2` through the respective side-channel for the transport being
+used which inevitably sets `GIT_PROTOCOL`.  More information can be
+found in `pack-protocol.txt` and `http-protocol.txt`.  In all cases the
+response from the server is the capability advertisement.
+
+ Git Transport
+~~~~~~~~~~~~~~~
+
+When using the git:// transport, you can request to use protocol v2 by
+sending "version=2" as an extra parameter:
+
+   003egit-upload-pack /project.git\0host=myserver.com\0\0version=2\0
+
+ SSH and File Transport
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+When using either the ssh:// or file:// transport, the GIT_PROTOCOL
+environment variable must be set explicitly to include "version=2".
+
+ HTTP Transport
+~~~~~~~~~~~~~~~~
+
+When using the http:// or https:// transport a client makes a "smart"
+info/refs request as described in `http-protocol.txt` and requests that
+v2 be used by supplying "version=2" in the `Git-Protocol` header.
+
+   C: Git-Protocol: version=2
+   C:
+   C: GET $GIT_URL/info/refs?service=git-upload-pack HTTP/1.0
+
+A v2 server would reply:
+
+   S: 200 OK
+   S: <Some headers>
+   S: ...
+   S:
+   S: 000eversion 2\n
+   S: <capability-advertisement>
+
+Subsequent requests are then made directly to the service
+`$GIT_URL/git-upload-pack`. (This works the same for git-receive-pack).
+
+ Capability Advertisement
+--------------------------
+
+A server which decides to communicate (based on a request from a client)
+using protocol version 2, notifies the client by sending a version string
+in its initial response followed by an advertisement of its capabilities.
+Each capability is a key with an optional value.  Clients must ignore all
+unknown keys.  Semantics of unknown values are left to the definition of
+each key.  Some capabilities will describe commands which can be requested
+to be executed by the client.
+
+    capability-advertisement = protocol-version
+			       capability-list
+			       flush-pkt
+
+    protocol-version = PKT-LINE("version 2" LF)
+    capability-list = *capability
+    capability = PKT-LINE(key[=value] LF)
+
+    key = 1*(ALPHA | DIGIT | "-_")
+    value = 1*(ALPHA | DIGIT | " -_.,?\/{}[]()<>!@#$%^&*+=:;")
+
+ Command Request
+-----------------
+
+After receiving the capability advertisement, a client can then issue a
+request to select the command it wants with any particular capabilities
+or arguments.  There is then an optional section where the client can
+provide any command specific parameters or queries.  Only a single
+command can be requested at a time.
+
+    request = empty-request | command-request
+    empty-request = flush-pkt
+    command-request = command
+		      capability-list
+		      [command-args]
+		      flush-pkt
+    command = PKT-LINE("command=" key LF)
+    command-args = delim-pkt
+		   *command-specific-arg
+
+    command-specific-args are packet line framed arguments defined by
+    each individual command.
+
+The server will then check to ensure that the client's request is
+comprised of a valid command as well as valid capabilities which were
+advertised.  If the request is valid the server will then execute the
+command.  A server MUST wait till it has received the client's entire
+request before issuing a response.  The format of the response is
+determined by the command being executed, but in all cases a flush-pkt
+indicates the end of the response.
+
+When a command has finished, and the client has received the entire
+response from the server, a client can either request that another
+command be executed or can terminate the connection.  A client may
+optionally send an empty request consisting of just a flush-pkt to
+indicate that no more requests will be made.
+
+ Capabilities
+--------------
+
+There are two different types of capabilities: normal capabilities,
+which can be used to to convey information or alter the behavior of a
+request, and commands, which are the core actions that a client wants to
+perform (fetch, push, etc).
+
+Protocol version 2 is stateless by default.  This means that all commands
+must only last a single round and be stateless from the perspective of the
+server side, unless the client has requested a capability indicating that
+state should be maintained by the server.  Clients MUST NOT require state
+management on the server side in order to function correctly.  This
+permits simple round-robin load-balancing on the server side, without
+needing to worry about state management.
+
+ agent
+~~~~~~~
+
+The server can advertise the `agent` capability with a value `X` (in the
+form `agent=X`) to notify the client that the server is running version
+`X`.  The client may optionally send its own agent string by including
+the `agent` capability with a value `Y` (in the form `agent=Y`) in its
+request to the server (but it MUST NOT do so if the server did not
+advertise the agent capability). The `X` and `Y` strings may contain any
+printable ASCII characters except space (i.e., the byte range 32 < x <
+127), and are typically of the form "package/version" (e.g.,
+"git/1.8.3.1"). The agent strings are purely informative for statistics
+and debugging purposes, and MUST NOT be used to programmatically assume
+the presence or absence of particular features.