diff options
Diffstat (limited to 'Documentation')
85 files changed, 1917 insertions, 481 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index b980407059..81d1bf7a04 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -21,6 +21,7 @@ MAN1_TXT += gitweb.txt MAN5_TXT += gitattributes.txt MAN5_TXT += githooks.txt MAN5_TXT += gitignore.txt +MAN5_TXT += gitmailmap.txt MAN5_TXT += gitmodules.txt MAN5_TXT += gitrepository-layout.txt MAN5_TXT += gitweb.conf.txt diff --git a/Documentation/MyFirstContribution.txt b/Documentation/MyFirstContribution.txt index 7c9a037cc2..af0a9da62e 100644 --- a/Documentation/MyFirstContribution.txt +++ b/Documentation/MyFirstContribution.txt @@ -664,7 +664,7 @@ mention the right animal somewhere: ---- test_expect_success 'runs correctly with no args and good output' ' git psuh >actual && - test_i18ngrep Pony actual + grep Pony actual ' ---- diff --git a/Documentation/RelNotes/2.17.6.txt b/Documentation/RelNotes/2.17.6.txt new file mode 100644 index 0000000000..2f181e8064 --- /dev/null +++ b/Documentation/RelNotes/2.17.6.txt @@ -0,0 +1,16 @@ +Git v2.17.6 Release Notes +========================= + +This release addresses the security issues CVE-2021-21300. + +Fixes since v2.17.5 +------------------- + + * CVE-2021-21300: + On case-insensitive file systems with support for symbolic links, + if Git is configured globally to apply delay-capable clean/smudge + filters (such as Git LFS), Git could be fooled into running + remote code during a clone. + +Credit for finding and fixing this vulnerability goes to Matheus +Tavares, helped by Johannes Schindelin. diff --git a/Documentation/RelNotes/2.18.5.txt b/Documentation/RelNotes/2.18.5.txt new file mode 100644 index 0000000000..dfb1de4ceb --- /dev/null +++ b/Documentation/RelNotes/2.18.5.txt @@ -0,0 +1,6 @@ +Git v2.18.5 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6 to address +the security issue CVE-2021-21300; see the release notes for that +version for details. diff --git a/Documentation/RelNotes/2.19.6.txt b/Documentation/RelNotes/2.19.6.txt new file mode 100644 index 0000000000..bcca6cd258 --- /dev/null +++ b/Documentation/RelNotes/2.19.6.txt @@ -0,0 +1,6 @@ +Git v2.19.6 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6 and +v2.18.5 to address the security issue CVE-2021-21300; see the +release notes for these versions for details. diff --git a/Documentation/RelNotes/2.20.5.txt b/Documentation/RelNotes/2.20.5.txt new file mode 100644 index 0000000000..1dfb784ded --- /dev/null +++ b/Documentation/RelNotes/2.20.5.txt @@ -0,0 +1,6 @@ +Git v2.20.5 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5 +and v2.19.6 to address the security issue CVE-2021-21300; see +the release notes for these versions for details. diff --git a/Documentation/RelNotes/2.21.4.txt b/Documentation/RelNotes/2.21.4.txt new file mode 100644 index 0000000000..0089dd6702 --- /dev/null +++ b/Documentation/RelNotes/2.21.4.txt @@ -0,0 +1,6 @@ +Git v2.21.4 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6 and v2.20.5 to address the security issue CVE-2021-21300; +see the release notes for these versions for details. diff --git a/Documentation/RelNotes/2.22.5.txt b/Documentation/RelNotes/2.22.5.txt new file mode 100644 index 0000000000..6b280d9321 --- /dev/null +++ b/Documentation/RelNotes/2.22.5.txt @@ -0,0 +1,7 @@ +Git v2.22.5 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, +v2.18.5, v2.19.6, v2.20.5 and v2.21.4 to address the security +issue CVE-2021-21300; see the release notes for these versions +for details. diff --git a/Documentation/RelNotes/2.23.4.txt b/Documentation/RelNotes/2.23.4.txt new file mode 100644 index 0000000000..6e5424d0da --- /dev/null +++ b/Documentation/RelNotes/2.23.4.txt @@ -0,0 +1,7 @@ +Git v2.23.4 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4 and v2.22.5 to address the security +issue CVE-2021-21300; see the release notes for these versions +for details. diff --git a/Documentation/RelNotes/2.24.4.txt b/Documentation/RelNotes/2.24.4.txt new file mode 100644 index 0000000000..4e216eec2a --- /dev/null +++ b/Documentation/RelNotes/2.24.4.txt @@ -0,0 +1,7 @@ +Git v2.24.4 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4, v2.22.5 and v2.23.4 to address the +security issue CVE-2021-21300; see the release notes for these +versions for details. diff --git a/Documentation/RelNotes/2.25.5.txt b/Documentation/RelNotes/2.25.5.txt new file mode 100644 index 0000000000..fcb9566b15 --- /dev/null +++ b/Documentation/RelNotes/2.25.5.txt @@ -0,0 +1,7 @@ +Git v2.25.5 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4, v2.22.5, v2.23.4 and v2.24.4 to address +the security issue CVE-2021-21300; see the release notes for +these versions for details. diff --git a/Documentation/RelNotes/2.26.3.txt b/Documentation/RelNotes/2.26.3.txt new file mode 100644 index 0000000000..4111c38f0a --- /dev/null +++ b/Documentation/RelNotes/2.26.3.txt @@ -0,0 +1,7 @@ +Git v2.26.3 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4, v2.22.5, v2.23.4, v2.24.4 and v2.25.5 +to address the security issue CVE-2021-21300; see the release +notes for these versions for details. diff --git a/Documentation/RelNotes/2.27.1.txt b/Documentation/RelNotes/2.27.1.txt new file mode 100644 index 0000000000..a1e08a9f72 --- /dev/null +++ b/Documentation/RelNotes/2.27.1.txt @@ -0,0 +1,7 @@ +Git v2.27.1 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4, v2.22.5, v2.23.4, v2.24.4, v2.25.5 +and v2.26.3 to address the security issue CVE-2021-21300; see +the release notes for these versions for details. diff --git a/Documentation/RelNotes/2.28.1.txt b/Documentation/RelNotes/2.28.1.txt new file mode 100644 index 0000000000..8484c8297c --- /dev/null +++ b/Documentation/RelNotes/2.28.1.txt @@ -0,0 +1,7 @@ +Git v2.28.1 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4, v2.22.5, v2.23.4, v2.24.4, v2.25.5, +v2.26.3 and v2.27.1 to address the security issue CVE-2021-21300; +see the release notes for these versions for details. diff --git a/Documentation/RelNotes/2.29.3.txt b/Documentation/RelNotes/2.29.3.txt new file mode 100644 index 0000000000..e10eedb35a --- /dev/null +++ b/Documentation/RelNotes/2.29.3.txt @@ -0,0 +1,8 @@ +Git v2.29.3 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, +v2.18.5, v2.19.6, v2.20.5, v2.21.4, v2.22.5, v2.23.4, v2.24.4, +v2.25.5, v2.26.3, v2.27.1 and v2.28.1 to address the security +issue CVE-2021-21300; see the release notes for these versions +for details. diff --git a/Documentation/RelNotes/2.30.0.txt b/Documentation/RelNotes/2.30.0.txt index 16955c7e38..c2f1dc7b06 100644 --- a/Documentation/RelNotes/2.30.0.txt +++ b/Documentation/RelNotes/2.30.0.txt @@ -81,8 +81,8 @@ UI, Workflows & Features * "git update-ref --stdin" learns to take multiple transactions in a single session. - * Various subcommands of "git config" that takes value_regex - learn the "--literal-value" option to take the value_regex option + * Various subcommands of "git config" that take value_regex + learned the "--literal-value" option to take the value_regex option as a literal string. * The transport layer was taught to optionally exchange the session @@ -120,11 +120,11 @@ Performance, Internal Implementation, Development Support etc. test pieces to run. * Adjust tests so that they won't scream when the default initial - branch name is changed to 'main'. + branch name is different from 'master'. * Rewriting "git bisect" in C continues. - * More preliminary tests have been added to document desired outcome + * More preliminary tests have been added to document desired outcomes of various "directory rename" situations. * Micro clean-up of a couple of test scripts. @@ -136,9 +136,6 @@ Performance, Internal Implementation, Development Support etc. * The code to detect premature EOF in the sideband demultiplexer has been cleaned up. - * Test scripts are being prepared to transition of the default branch - name to 'main'. - * "git fetch --depth=<n>" over the stateless RPC / smart HTTP transport handled EOF from the client poorly at the server end. @@ -252,7 +249,7 @@ Fixes since v2.29 (merge c779386182 jc/sequencer-stopped-sha-simplify later to maint). * The code to see if "git stash drop" can safely remove refs/stash - has been made more carerful. + has been made more careful. (merge 4f44c5659b rs/empty-reflog-check-fix later to maint). * "git log -L<range>:<path>" is documented to take no pathspec, but @@ -299,7 +296,7 @@ Fixes since v2.29 (merge 81c4c5cf2e jk/4gb-idx later to maint). * Since jgit does not yet work with SHA-256 repositories, mark the - tests that uses it not to run unless we are testing with ShA-1 + tests that use it not to run unless we are testing with ShA-1 repositories. (merge ea699b4adc sg/t5310-jgit-wants-sha1 later to maint). @@ -337,7 +334,7 @@ Fixes since v2.29 (merge 506ec2fbda tb/idx-midx-race-fix later to maint). * "git apply" adjusted the permission bits of working-tree files and - directories according core.sharedRepository setting by mistake and + directories according to core.sharedRepository setting by mistake and for a long time, which has been corrected. (merge eb3c027e17 mt/do-not-use-scld-in-working-tree later to maint). @@ -363,6 +360,10 @@ Fixes since v2.29 * Tighten error checking in the codepath that responds to "git fetch". (merge d43a21bdbb jk/check-config-parsing-error-in-upload-pack later to maint). + * "git pack-redundant" when there is only one packfile used to crash, + which has been corrected. + (merge 0696232390 jx/pack-redundant-on-single-pack later to maint). + * Other code cleanup, docfix, build fix, etc. (merge 3e0a5dc9af cc/doc-filter-branch-typofix later to maint). (merge 32c83afc2c cw/ci-ghwf-check-ws-errors later to maint). @@ -393,3 +394,8 @@ Fixes since v2.29 (merge 7fe07275be js/cmake-extra-built-ins-fix later to maint). (merge 633eebe142 jb/midx-doc-update later to maint). (merge 5885367e8f jh/index-v2-doc-on-fsmn later to maint). + (merge 14639a4779 jc/compat-util-setitimer-fix later to maint). + (merge 56f56ac50b ab/unreachable-break later to maint). + (merge 731d578b4f rb/nonstop-config-mak-uname-update later to maint). + (merge f4698738f9 es/perf-export-fix later to maint). + (merge 773c694142 nk/refspecs-negative-fix later to maint). diff --git a/Documentation/RelNotes/2.30.1.txt b/Documentation/RelNotes/2.30.1.txt new file mode 100644 index 0000000000..249ef1492f --- /dev/null +++ b/Documentation/RelNotes/2.30.1.txt @@ -0,0 +1,55 @@ +Git v2.30.1 Release Notes +========================= + +This release is primarily to merge fixes accumulated on the 'master' +front to prepare for 2.31 release that are still relevant to 2.30.x +maintenance track. + +Fixes since v2.30 +----------------- + + * "git fetch --recurse-submodules" failed to update a submodule + when it has an uninitialized (hence of no interest to the user) + sub-submodule, which has been corrected. + + * Command line error of "git rebase" are diagnosed earlier. + + * "git stash" did not work well in a sparsely checked out working + tree. + + * Some tests expect that "ls -l" output has either '-' or 'x' for + group executable bit, but setgid bit can be inherited from parent + directory and make these fields 'S' or 's' instead, causing test + failures. + + * "git for-each-repo --config=<var> <cmd>" should not run <cmd> for + any repository when the configuration variable <var> is not defined + even once. + + * "git mergetool --tool-help" was broken in 2.29 and failed to list + all the available tools. + + * Fix for procedure to building CI test environment for mac. + + * Newline characters in the host and path part of git:// URL are + now forbidden. + + * When more than one commit with the same patch ID appears on one + side, "git log --cherry-pick A...B" did not exclude them all when a + commit with the same patch ID appears on the other side. Now it + does. + + * Documentation for "git fsck" lost stale bits that has become + incorrect. + + * Doc for packfile URI feature has been clarified. + + * The implementation of "git branch --sort" wrt the detached HEAD + display has always been hacky, which has been cleaned up. + + * Our setting of GitHub CI test jobs were a bit too eager to give up + once there is even one failure found. Tweak the knob to allow + other jobs keep running even when we see a failure, so that we can + find more failures in a single run. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.30.2.txt b/Documentation/RelNotes/2.30.2.txt new file mode 100644 index 0000000000..bada398501 --- /dev/null +++ b/Documentation/RelNotes/2.30.2.txt @@ -0,0 +1,8 @@ +Git v2.30.2 Release Notes +========================= + +This release merges up the fixes that appear in v2.17.6, v2.18.5, +v2.19.6, v2.20.5, v2.21.4, v2.22.5, v2.23.4, v2.24.4, v2.25.5, +v2.26.3, v2.27.1, v2.28.1 and v2.29.3 to address the security +issue CVE-2021-21300; see the release notes for these versions +for details. diff --git a/Documentation/RelNotes/2.31.0.txt b/Documentation/RelNotes/2.31.0.txt new file mode 100644 index 0000000000..cf0c7d8d40 --- /dev/null +++ b/Documentation/RelNotes/2.31.0.txt @@ -0,0 +1,365 @@ +Git 2.31 Release Notes +====================== + +Updates since v2.30 +------------------- + +Backward incompatible and other important changes + + * The "pack-redundant" command, which has been left stale with almost + unusable performance issues, now warns loudly when it gets used, as + we no longer want to recommend its use (instead just "repack -d" + instead). + + * The development community has adopted Contributor Covenant v2.0 to + update from v1.4 that we have been using. + + * The support for deprecated PCRE1 library has been dropped. + + * Fixes for CVE-2021-21300 in Git 2.30.2 (and earlier) is included. + + +UI, Workflows & Features + + * The "--format=%(trailers)" mechanism gets enhanced to make it + easier to design output for machine consumption. + + * When a user does not tell "git pull" to use rebase or merge, the + command gives a loud message telling a user to choose between + rebase or merge but creates a merge anyway, forcing users who would + want to rebase to redo the operation. Fix an early part of this + problem by tightening the condition to give the message---there is + no reason to stop or force the user to choose between rebase or + merge if the history fast-forwards. + + * The configuration variable 'core.abbrev' can be set to 'no' to + force no abbreviation regardless of the hash algorithm. + + * "git rev-parse" can be explicitly told to give output as absolute + or relative path with the `--path-format=(absolute|relative)` option. + + * Bash completion (in contrib/) update to make it easier for + end-users to add completion for their custom "git" subcommands. + + * "git maintenance" learned to drive scheduled maintenance on + platforms whose native scheduling methods are not 'cron'. + + * After expiring a reflog and making a single commit, the reflog for + the branch would record a single entry that knows both @{0} and + @{1}, but we failed to answer "what commit were we on?", i.e. @{1} + + * "git bundle" learns "--stdin" option to read its refs from the + standard input. Also, it now does not lose refs whey they point + at the same object. + + * "git log" learned a new "--diff-merges=<how>" option. + + * "git ls-files" can and does show multiple entries when the index is + unmerged, which is a source for confusion unless -s/-u option is in + use. A new option --deduplicate has been introduced. + + * `git worktree list` now annotates worktrees as prunable, shows + locked and prunable attributes in --porcelain mode, and gained + a --verbose option. + + * "git clone" tries to locally check out the branch pointed at by + HEAD of the remote repository after it is done, but the protocol + did not convey the information necessary to do so when copying an + empty repository. The protocol v2 learned how to do so. + + * There are other ways than ".." for a single token to denote a + "commit range", namely "<rev>^!" and "<rev>^-<n>", but "git + range-diff" did not understand them. + + * The "git range-diff" command learned "--(left|right)-only" option + to show only one side of the compared range. + + * "git mergetool" feeds three versions (base, local and remote) of + a conflicted path unmodified. The command learned to optionally + prepare these files with unconflicted parts already resolved. + + * The .mailmap is documented to be read only from the root level of a + working tree, but a stray file in a bare repository also was read + by accident, which has been corrected. + + * "git maintenance" tool learned a new "pack-refs" maintenance task. + + * The error message given when a configuration variable that is + expected to have a boolean value has been improved. + + * Signed commits and tags now allow verification of objects, whose + two object names (one in SHA-1, the other in SHA-256) are both + signed. + + * "git rev-list" command learned "--disk-usage" option. + + * "git {diff,log} --{skip,rotate}-to=<path>" allows the user to + discard diff output for early paths or move them to the end of the + output. + + * "git difftool" learned "--skip-to=<path>" option to restart an + interrupted session from an arbitrary path. + + * "git grep" has been tweaked to be limited to the sparse checkout + paths. + + * "git rebase --[no-]fork-point" gained a configuration variable + rebase.forkPoint so that users do not have to keep specifying a + non-default setting. + + +Performance, Internal Implementation, Development Support etc. + + * A 3-year old test that was not testing anything useful has been + corrected. + + * Retire more names with "sha1" in it. + + * The topological walk codepath is covered by new trace2 stats. + + * Update the Code-of-conduct to version 2.0 from the upstream (we've + been using version 1.4). + + * "git mktag" validates its input using its own rules before writing + a tag object---it has been updated to share the logic with "git + fsck". + + * Two new ways to feed configuration variable-value pairs via + environment variables have been introduced, and the way + GIT_CONFIG_PARAMETERS encodes variable/value pairs has been tweaked + to make it more robust. + + * Tests have been updated so that they do not to get affected by the + name of the default branch "git init" creates. + + * "git fetch" learns to treat ref updates atomically in all-or-none + fashion, just like "git push" does, with the new "--atomic" option. + + * The peel_ref() API has been replaced with peel_iterated_oid(). + + * The .use_shell flag in struct child_process that is passed to + run_command() API has been clarified with a bit more documentation. + + * Document, clean-up and optimize the code around the cache-tree + extension in the index. + + * The ls-refs protocol operation has been optimized to narrow the + sub-hierarchy of refs/ it walks to produce response. + + * When removing many branches and tags, the code used to do so one + ref at a time. There is another API it can use to delete multiple + refs, and it makes quite a lot of performance difference when the + refs are packed. + + * The "pack-objects" command needs to iterate over all the tags when + automatic tag following is enabled, but it actually iterated over + all refs and then discarded everything outside "refs/tags/" + hierarchy, which was quite wasteful. + + * A perf script was made more portable. + + * Our setting of GitHub CI test jobs were a bit too eager to give up + once there is even one failure found. Tweak the knob to allow + other jobs keep running even when we see a failure, so that we can + find more failures in a single run. + + * We've carried compatibility codepaths for compilers without + variadic macros for quite some time, but the world may be ready for + them to be removed. Force compilation failure on exotic platforms + where variadic macros are not available to find out who screams in + such a way that we can easily revert if it turns out that the world + is not yet ready. + + * Code clean-up to ensure our use of hashtables using object names as + keys use the "struct object_id" objects, not the raw hash values. + + * Lose the debugging aid that may have been useful in the past, but + no longer is, in the "grep" codepaths. + + * Some pretty-format specifiers do not need the data in commit object + (e.g. "%H"), but we were over-eager to load and parse it, which has + been made even lazier. + + * Get rid of "GETTEXT_POISON" support altogether, which may or may + not be controversial. + + * Introduce an on-disk file to record revindex for packdata, which + traditionally was always created on the fly and only in-core. + + * The commit-graph learned to use corrected commit dates instead of + the generation number to help topological revision traversal. + + * Piecemeal of rewrite of "git bisect" in C continues. + + * When a pager spawned by us exited, the trace log did not record its + exit status correctly, which has been corrected. + + * Removal of GIT_TEST_GETTEXT_POISON continues. + + * The code to implement "git merge-base --independent" was poorly + done and was kept from the very beginning of the feature. + + * Preliminary changes to fsmonitor integration. + + * Performance improvements for rename detection. + + * The common code to deal with "chunked file format" that is shared + by the multi-pack-index and commit-graph files have been factored + out, to help codepaths for both filetypes to become more robust. + + * The approach to "fsck" the incoming objects in "index-pack" is + attractive for performance reasons (we have them already in core, + inflated and ready to be inspected), but fundamentally cannot be + applied fully when we receive more than one pack stream, as a tree + object in one pack may refer to a blob object in another pack as + ".gitmodules", when we want to inspect blobs that are used as + ".gitmodules" file, for example. Teach "index-pack" to emit + objects that must be inspected later and check them in the calling + "fetch-pack" process. + + * The logic to handle "trailer" related placeholders in the + "--format=" mechanisms in the "log" family and "for-each-ref" + family is getting unified. + + * Raise the buffer size used when writing the index file out from + (obviously too small) 8kB to (clearly sufficiently large) 128kB. + + * It is reported that open() on some platforms (e.g. macOS Big Sur) + can return EINTR even though our timers are set up with SA_RESTART. + A workaround has been implemented and enabled for macOS to rerun + open() transparently from the caller when this happens. + + +Fixes since v2.30 +----------------- + + * Diagnose command line error of "git rebase" early. + + * Clean up option descriptions in "git cmd --help". + + * "git stash" did not work well in a sparsely checked out working + tree. + + * Some tests expect that "ls -l" output has either '-' or 'x' for + group executable bit, but setgid bit can be inherited from parent + directory and make these fields 'S' or 's' instead, causing test + failures. + + * "git for-each-repo --config=<var> <cmd>" should not run <cmd> for + any repository when the configuration variable <var> is not defined + even once. + + * Fix 2.29 regression where "git mergetool --tool-help" fails to list + all the available tools. + + * Fix for procedure to building CI test environment for mac. + + * The implementation of "git branch --sort" wrt the detached HEAD + display has always been hacky, which has been cleaned up. + + * Newline characters in the host and path part of git:// URL are + now forbidden. + + * "git diff" showed a submodule working tree with untracked cruft as + "Submodule commit <objectname>-dirty", but a natural expectation is + that the "-dirty" indicator would align with "git describe --dirty", + which does not consider having untracked files in the working tree + as source of dirtiness. The inconsistency has been fixed. + + * When more than one commit with the same patch ID appears on one + side, "git log --cherry-pick A...B" did not exclude them all when a + commit with the same patch ID appears on the other side. Now it + does. + + * Documentation for "git fsck" lost stale bits that has become + incorrect. + + * Doc fix for packfile URI feature. + + * When "git rebase -i" processes "fixup" insn, there is no reason to + clean up the commit log message, but we did the usual stripspace + processing. This has been corrected. + (merge f7d42ceec5 js/rebase-i-commit-cleanup-fix later to maint). + + * Fix in passing custom args from "git clone" to "upload-pack" on the + other side. + (merge ad6b5fefbd jv/upload-pack-filter-spec-quotefix later to maint). + + * The command line completion (in contrib/) completed "git branch -d" + with branch names, but "git branch -D" offered tagnames in addition, + which has been corrected. "git branch -M" had the same problem. + (merge 27dc071b9a jk/complete-branch-force-delete later to maint). + + * When commands are started from a subdirectory, they may have to + compare the path to the subdirectory (called prefix and found out + from $(pwd)) with the tracked paths. On macOS, $(pwd) and + readdir() yield decomposed path, while the tracked paths are + usually normalized to the precomposed form, causing mismatch. This + has been fixed by taking the same approach used to normalize the + command line arguments. + (merge 5c327502db tb/precompose-prefix-too later to maint). + + * Even though invocations of "die()" were logged to the trace2 + system, "BUG()"s were not, which has been corrected. + (merge 0a9dde4a04 jt/trace2-BUG later to maint). + + * "git grep --untracked" is meant to be "let's ALSO find in these + files on the filesystem" when looking for matches in the working + tree files, and does not make any sense if the primary search is + done against the index, or the tree objects. The "--cached" and + "--untracked" options have been marked as mutually incompatible. + (merge 0c5d83b248 mt/grep-cached-untracked later to maint). + + * Fix "git fsck --name-objects" which apparently has not been used by + anybody who is motivated enough to report breakage. + (merge e89f89361c js/fsck-name-objects-fix later to maint). + + * Avoid individual tests in t5411 from getting affected by each other + by forcing them to use separate output files during the test. + (merge 822ee894f6 jx/t5411-unique-filenames later to maint). + + * Test to make sure "git rev-parse one-thing one-thing" gives + the same thing twice (when one-thing is --since=X). + (merge a5cdca4520 ew/rev-parse-since-test later to maint). + + * When certain features (e.g. grafts) used in the repository are + incompatible with the use of the commit-graph, we used to silently + turned commit-graph off; we now tell the user what we are doing. + (merge c85eec7fc3 js/commit-graph-warning later to maint). + + * Objects that lost references can be pruned away, even when they + have notes attached to it (and these notes will become dangling, + which in turn can be pruned with "git notes prune"). This has been + clarified in the documentation. + (merge fa9ab027ba mz/doc-notes-are-not-anchors later to maint). + + * The error codepath around the "--temp/--prefix" feature of "git + checkout-index" has been improved. + (merge 3f7ba60350 mt/checkout-index-corner-cases later to maint). + + * The "git maintenance register" command had trouble registering bare + repositories, which had been corrected. + + * A handful of multi-word configuration variable names in + documentation that are spelled in all lowercase have been corrected + to use the more canonical camelCase. + (merge 7dd0eaa39c dl/doc-config-camelcase later to maint). + + * "git push $there --delete ''" should have been diagnosed as an + error, but instead turned into a matching push, which has been + corrected. + (merge 20e416409f jc/push-delete-nothing later to maint). + + * Test script modernization. + (merge 488acf15df sv/t7001-modernize later to maint). + + * An under-allocation for the untracked cache data has been corrected. + (merge 6347d649bc jh/untracked-cache-fix later to maint). + + * Other code cleanup, docfix, build fix, etc. + (merge e3f5da7e60 sg/t7800-difftool-robustify later to maint). + (merge 9d336655ba js/doc-proto-v2-response-end later to maint). + (merge 1b5b8cf072 jc/maint-column-doc-typofix later to maint). + (merge 3a837b58e3 cw/pack-config-doc later to maint). + (merge 01168a9d89 ug/doc-commit-approxidate later to maint). + (merge b865734760 js/params-vs-args later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index d12094bac5..0452db2e67 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -307,7 +307,7 @@ wrote the patch or have the right to pass it on under the same license as ours, by "signing off" your patch. Without sign-off, we cannot accept your patches. -If you can certify the below D-C-O: +If (and only if) you certify the below D-C-O: [[dco]] .Developer's Certificate of Origin 1.1 diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index dc3bceb6d1..117f4cf806 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -1,6 +1,6 @@ -b:: Show blank SHA-1 for boundary commits. This can also - be controlled via the `blame.blankboundary` config option. + be controlled via the `blame.blankBoundary` config option. --root:: Do not treat root commits as boundaries. This can also be diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 160aacad84..c04f62a54a 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -625,4 +625,6 @@ core.abbrev:: computed based on the approximate number of packed objects in your repository, which hopefully is enough for abbreviated object names to stay unique for some time. + If set to "no", no abbreviation is made and the object names + are shown in their full length. The minimum length is 4. diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index c3ae136eba..2d3331f55c 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -85,6 +85,8 @@ diff.ignoreSubmodules:: and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. + By default this is set to untracked so that any untracked + submodules are ignored. diff.mnemonicPrefix:: If set, 'git diff' uses a prefix pair that is different from the diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt index 3968fbb697..7003661c0d 100644 --- a/Documentation/config/http.txt +++ b/Documentation/config/http.txt @@ -42,12 +42,12 @@ http.proxySSLKey:: http.proxySSLCertPasswordProtected:: Enable Git's password prompt for the proxy SSL certificate. Otherwise OpenSSL will prompt the user, possibly many times, if the certificate or private key - is encrypted. Can be overriden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED` + is encrypted. Can be overridden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED` environment variable. http.proxySSLCAInfo:: Pathname to the file containing the certificate bundle that should be used to - verify the proxy with when using an HTTPS proxy. Can be overriden by the + verify the proxy with when using an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_CAINFO` environment variable. http.emptyAuth:: diff --git a/Documentation/config/maintenance.txt b/Documentation/config/maintenance.txt index a5ead09e4b..18f0562131 100644 --- a/Documentation/config/maintenance.txt +++ b/Documentation/config/maintenance.txt @@ -15,8 +15,9 @@ maintenance.strategy:: * `none`: This default setting implies no task are run at any schedule. * `incremental`: This setting optimizes for performing small maintenance activities that do not delete any data. This does not schedule the `gc` - task, but runs the `prefetch` and `commit-graph` tasks hourly and the - `loose-objects` and `incremental-repack` tasks daily. + task, but runs the `prefetch` and `commit-graph` tasks hourly, the + `loose-objects` and `incremental-repack` tasks daily, and the `pack-refs` + task weekly. maintenance.<task>.enabled:: This boolean config option controls whether the maintenance task diff --git a/Documentation/config/mergetool.txt b/Documentation/config/mergetool.txt index 16a27443a3..cafbbef46a 100644 --- a/Documentation/config/mergetool.txt +++ b/Documentation/config/mergetool.txt @@ -13,6 +13,11 @@ mergetool.<tool>.cmd:: merged; 'MERGED' contains the name of the file to which the merge tool should write the results of a successful merge. +mergetool.<tool>.hideResolved:: + Allows the user to override the global `mergetool.hideResolved` value + for a specific tool. See `mergetool.hideResolved` for the full + description. + mergetool.<tool>.trustExitCode:: For a custom merge command, specify whether the exit code of the merge command can be used to determine whether the merge was @@ -40,6 +45,16 @@ mergetool.meld.useAutoMerge:: value of `false` avoids using `--auto-merge` altogether, and is the default value. +mergetool.hideResolved:: + During a merge Git will automatically resolve as many conflicts as + possible and write the 'MERGED' file containing conflict markers around + any conflicts that it cannot resolve; 'LOCAL' and 'REMOTE' normally + represent the versions of the file from before Git's conflict + resolution. This flag causes 'LOCAL' and 'REMOTE' to be overwriten so + that only the unresolved conflicts are presented to the merge tool. Can + be configured per-tool via the `mergetool.<tool>.hideResolved` + configuration variable. Defaults to `false`. + mergetool.keepBackup:: After performing a merge, the original file with conflict markers can be saved as a file with a `.orig` extension. If this variable diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 837f1b1679..3da4ea98e2 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -133,3 +133,10 @@ pack.writeBitmapHashCache:: between an older, bitmapped pack and objects that have been pushed since the last gc). The downside is that it consumes 4 bytes per object of disk space. Defaults to true. + +pack.writeReverseIndex:: + When true, git will write a corresponding .rev file (see: + link:../technical/pack-format.html[Documentation/technical/pack-format.txt]) + for each new packfile that it writes in all places except for + linkgit:git-fast-import[1] and in the bulk checkin mechanism. + Defaults to false. diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index 7f7a07d22f..214f31b451 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -68,3 +68,6 @@ rebase.rescheduleFailedExec:: Automatically reschedule `exec` commands that failed. This only makes sense in interactive mode (or when an `--exec` option was provided). This is the same as specifying the `--reschedule-failed-exec` option. + +rebase.forkPoint:: + If set to false set `--no-fork-point` option by default. diff --git a/Documentation/config/trace2.txt b/Documentation/config/trace2.txt index 01d3afd8a8..fe1642f0d4 100644 --- a/Documentation/config/trace2.txt +++ b/Documentation/config/trace2.txt @@ -54,7 +54,7 @@ trace2.envVars:: `GIT_HTTP_USER_AGENT,GIT_CONFIG` would cause the trace2 output to contain events listing the overrides for HTTP user agent and the location of the Git configuration file (assuming any are set). May be - overriden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by + overridden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by default. trace2.destinationDebug:: diff --git a/Documentation/date-formats.txt b/Documentation/date-formats.txt index f1097fac69..99c455f51c 100644 --- a/Documentation/date-formats.txt +++ b/Documentation/date-formats.txt @@ -1,10 +1,7 @@ DATE FORMATS ------------ -The `GIT_AUTHOR_DATE`, `GIT_COMMITTER_DATE` environment variables -ifdef::git-commit[] -and the `--date` option -endif::git-commit[] +The `GIT_AUTHOR_DATE` and `GIT_COMMITTER_DATE` environment variables support the following date formats: Git internal format:: @@ -26,3 +23,9 @@ ISO 8601:: + NOTE: In addition, the date part is accepted in the following formats: `YYYY.MM.DD`, `MM/DD/YYYY` and `DD.MM.YYYY`. + +ifdef::git-commit[] +In addition to recognizing all date formats above, the `--date` option +will also try to make sense of other, more human-centric date formats, +such as relative dates like "yesterday" or "last Friday at noon". +endif::git-commit[] diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index b10ff4caa6..2db8eacc3e 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -81,9 +81,9 @@ Combined diff format Any diff-generating command can take the `-c` or `--cc` option to produce a 'combined diff' when showing a merge. This is the default format when showing merges with linkgit:git-diff[1] or -linkgit:git-show[1]. Note also that you can give the `-m` option to any -of these commands to force generation of diffs with individual parents -of a merge. +linkgit:git-show[1]. Note also that you can give suitable +`--diff-merges` option to any of these commands to force generation of +diffs in specific format. A "combined diff" format looks like this: diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 746b144c76..aa2b5c11f2 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -33,6 +33,57 @@ endif::git-diff[] show the patch by default, or to cancel the effect of `--patch`. endif::git-format-patch[] +ifdef::git-log[] +--diff-merges=(off|none|first-parent|1|separate|m|combined|c|dense-combined|cc):: +--no-diff-merges:: + Specify diff format to be used for merge commits. Default is + {diff-merges-default} unless `--first-parent` is in use, in which case + `first-parent` is the default. ++ +--diff-merges=(off|none)::: +--no-diff-merges::: + Disable output of diffs for merge commits. Useful to override + implied value. ++ +--diff-merges=first-parent::: +--diff-merges=1::: + This option makes merge commits show the full diff with + respect to the first parent only. ++ +--diff-merges=separate::: +--diff-merges=m::: +-m::: + This makes merge commits show the full diff with respect to + each of the parents. Separate log entry and diff is generated + for each parent. `-m` doesn't produce any output without `-p`. ++ +--diff-merges=combined::: +--diff-merges=c::: +-c::: + With this option, diff output for a merge commit shows the + differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a + parent and the result one at a time. Furthermore, it lists + only files which were modified from all parents. `-c` implies + `-p`. ++ +--diff-merges=dense-combined::: +--diff-merges=cc::: +--cc::: + With this option the output produced by + `--diff-merges=combined` is further compressed by omitting + uninteresting hunks whose contents in the parents have only + two variants and the merge result picks one of them without + modification. `--cc` implies `-p`. + +--combined-all-paths:: + This flag causes combined diffs (used for merge commits) to + list the name of the file from all parents. It thus only has + effect when `--diff-merges=[dense-]combined` is in use, and + is likely only useful if filename changes are detected (i.e. + when either rename or copy detection have been requested). +endif::git-log[] + -U<n>:: --unified=<n>:: Generate diffs with <n> lines of context instead of @@ -649,6 +700,14 @@ matches a pattern if removing any number of the final pathname components matches the pattern. For example, the pattern "`foo*bar`" matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". +--skip-to=<file>:: +--rotate-to=<file>:: + Discard the files before the named <file> from the output + (i.e. 'skip to'), or move them to the end of the output + (i.e. 'rotate to'). These were invented primarily for use + of the `git difftool` command, and may not be very useful + otherwise. + ifndef::git-format-patch[] -R:: Swap two inputs; that is, show differences from index or diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 2bf77b46fd..07783deee3 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -7,6 +7,10 @@ existing contents of `.git/FETCH_HEAD`. Without this option old data in `.git/FETCH_HEAD` will be overwritten. +--atomic:: + Use an atomic transaction to update local refs. Either all refs are + updated, or on error, no refs are updated. + --depth=<depth>:: Limit fetching to the specified number of commits from the tip of each remote branch history. If fetching to a 'shallow' repository diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 06bc063542..decd8ae122 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -79,7 +79,7 @@ OPTIONS Pass `-u` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). The proposed commit log message taken from the e-mail is re-coded into UTF-8 encoding (configuration variable - `i18n.commitencoding` can be used to specify project's + `i18n.commitEncoding` can be used to specify project's preferred encoding if it is not UTF-8). + This was optional in prior versions of git, but now it is the diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index 34b496d485..3bf5d5d8b4 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -226,7 +226,7 @@ commit commentary), a blame viewer will not care. MAPPING AUTHORS --------------- -include::mailmap.txt[] +See linkgit:gitmailmap[5]. SEE ALSO diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index adaa1782a8..94dc9a54f2 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -78,8 +78,8 @@ renaming. If <newbranch> exists, -M must be used to force the rename to happen. The `-c` and `-C` options have the exact same semantics as `-m` and -`-M`, except instead of the branch being renamed it along with its -config and reflog will be copied to a new name. +`-M`, except instead of the branch being renamed, it will be copied to a +new name, along with its config and reflog. With a `-d` or `-D` option, `<branchname>` will be deleted. You may specify more than one branch for deletion. If the branch currently @@ -153,7 +153,7 @@ OPTIONS --column[=<options>]:: --no-column:: Display branch listing in columns. See configuration variable - column.branch for option syntax.`--column` and `--no-column` + `column.branch` for option syntax. `--column` and `--no-column` without options are equivalent to 'always' and 'never' respectively. + This option is only applicable in non-verbose mode. diff --git a/Documentation/git-check-mailmap.txt b/Documentation/git-check-mailmap.txt index aa2055dbeb..02f4418323 100644 --- a/Documentation/git-check-mailmap.txt +++ b/Documentation/git-check-mailmap.txt @@ -36,10 +36,17 @@ name is provided or known to the 'mailmap', ``Name $$<user@host>$$'' is printed; otherwise only ``$$<user@host>$$'' is printed. +CONFIGURATION +------------- + +See `mailmap.file` and `mailmap.blob` in linkgit:git-config[1] for how +to specify a custom `.mailmap` target file or object. + + MAPPING AUTHORS --------------- -include::mailmap.txt[] +See linkgit:gitmailmap[5]. GIT diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 876aedcd47..02d9c19cec 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -57,6 +57,10 @@ repository is specified as a URL, then this flag is ignored (and we never use the local optimizations). Specifying `--no-local` will override the default when `/path/to/repo` is given, using the regular Git transport instead. ++ +*NOTE*: this operation can race with concurrent modification to the +source repository, similar to running `cp -r src dst` while modifying +`src`. --no-hardlinks:: Force the cloning process from a repository on a local diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 0e9351d3cb..4b4cc5c5e8 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -346,6 +346,22 @@ GIT_CONFIG_NOSYSTEM:: See also <<FILES>>. +GIT_CONFIG_COUNT:: +GIT_CONFIG_KEY_<n>:: +GIT_CONFIG_VALUE_<n>:: + If GIT_CONFIG_COUNT is set to a positive number, all environment pairs + GIT_CONFIG_KEY_<n> and GIT_CONFIG_VALUE_<n> up to that number will be + added to the process's runtime configuration. The config pairs are + zero-indexed. Any missing key or value is treated as an error. An empty + GIT_CONFIG_COUNT is treated the same as GIT_CONFIG_COUNT=0, namely no + pairs are processed. These environment variables will override values + in configuration files, but will be overridden by any explicit options + passed via `git -c`. ++ +This is useful for cases where you want to spawn multiple git commands +with a common configuration but cannot depend on a configuration file, +for example when writing scripts. + [[EXAMPLES]] EXAMPLES diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 484c485fd0..143b0c49d7 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -34,6 +34,14 @@ OPTIONS This is the default behaviour; the option is provided to override any configuration settings. +--rotate-to=<file>:: + Start showing the diff for the given path, + the paths before it will move to end and output. + +--skip-to=<file>:: + Start showing the diff for the given path, skipping all + the paths before it. + -t <tool>:: --tool=<tool>:: Use the diff tool specified by <tool>. Valid values include diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 2962f85a50..2ae2478de7 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -260,11 +260,9 @@ contents:lines=N:: The first `N` lines of the message. Additionally, the trailers as interpreted by linkgit:git-interpret-trailers[1] -are obtained as `trailers` (or by using the historical alias -`contents:trailers`). Non-trailer lines from the trailer block can be omitted -with `trailers:only`. Whitespace-continuations can be removed from trailers so -that each trailer appears on a line by itself with its full content with -`trailers:unfold`. Both can be used together as `trailers:unfold,only`. +are obtained as `trailers[:options]` (or by using the historical alias +`contents:trailers[:options]`). For valid [:option] values see `trailers` +section of linkgit:git-log[1]. For sorting purposes, fields with numeric values sort in numeric order (`objectsize`, `authordate`, `committerdate`, `creatordate`, `taggerdate`). diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index d72d15be5b..bd596619c0 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -129,14 +129,6 @@ using 'git commit-graph verify'. See linkgit:git-commit-graph[1]. Extracted Diagnostics --------------------- -expect dangling commits - potential heads - due to lack of head information:: - You haven't specified any nodes as heads so it won't be - possible to differentiate between un-parented commits and - root nodes. - -missing sha1 directory '<dir>':: - The directory holding the sha1 objects is missing. - unreachable <type> <object>:: The <type> object <object>, isn't actually referred to directly or indirectly in any of the trees or commits seen. This can diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 0c114ad1ca..853967dea0 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -117,12 +117,14 @@ NOTES 'git gc' tries very hard not to delete objects that are referenced anywhere in your repository. In particular, it will keep not only objects referenced by your current set of branches and tags, but also -objects referenced by the index, remote-tracking branches, notes saved -by 'git notes' under refs/notes/, reflogs (which may reference commits -in branches that were later amended or rewound), and anything else in -the refs/* namespace. If you are expecting some objects to be deleted -and they aren't, check all of those locations and decide whether it -makes sense in your case to remove those references. +objects referenced by the index, remote-tracking branches, reflogs +(which may reference commits in branches that were later amended or +rewound), and anything else in the refs/* namespace. Note that a note +(of the kind created by 'git notes') attached to an object does not +contribute in keeping the object alive. If you are expecting some +objects to be deleted and they aren't, check all of those locations +and decide whether it makes sense in your case to remove those +references. On the other hand, when 'git gc' runs concurrently with another process, there is a risk of it deleting an object that the other process is using diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt index 4deb4893f5..9fa17b60e4 100644 --- a/Documentation/git-http-fetch.txt +++ b/Documentation/git-http-fetch.txt @@ -41,11 +41,17 @@ commit-id:: <commit-id>['\t'<filename-as-in--w>] --packfile=<hash>:: - Instead of a commit id on the command line (which is not expected in + For internal use only. Instead of a commit id on the command + line (which is not expected in this case), 'git http-fetch' fetches the packfile directly at the given URL and uses index-pack to generate corresponding .idx and .keep files. The hash is used to determine the name of the temporary file and is - arbitrary. The output of index-pack is printed to stdout. + arbitrary. The output of index-pack is printed to stdout. Requires + --index-pack-args. + +--index-pack-args=<args>:: + For internal use only. The command to run on the contents of the + downloaded pack. Arguments are URL-encoded separated by spaces. --recover:: Verify that everything reachable from target is fetched. Used after diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index af0c26232c..7fa74b9e79 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -9,17 +9,18 @@ git-index-pack - Build pack index file for an existing packed archive SYNOPSIS -------- [verse] -'git index-pack' [-v] [-o <index-file>] <pack-file> +'git index-pack' [-v] [-o <index-file>] [--[no-]rev-index] <pack-file> 'git index-pack' --stdin [--fix-thin] [--keep] [-v] [-o <index-file>] - [<pack-file>] + [--[no-]rev-index] [<pack-file>] DESCRIPTION ----------- Reads a packed archive (.pack) from the specified file, and -builds a pack index file (.idx) for it. The packed archive -together with the pack index can then be placed in the -objects/pack/ directory of a Git repository. +builds a pack index file (.idx) for it. Optionally writes a +reverse-index (.rev) for the specified pack. The packed +archive together with the pack index can then be placed in +the objects/pack/ directory of a Git repository. OPTIONS @@ -35,6 +36,13 @@ OPTIONS fails if the name of packed archive does not end with .pack). +--[no-]rev-index:: + When this flag is provided, generate a reverse index + (a `.rev` file) corresponding to the given pack. If + `--verify` is given, ensure that the existing + reverse index is correct. Takes precedence over + `pack.writeReverseIndex`. + --stdin:: When this flag is provided, the pack is read from stdin instead and a copy is then written to <pack-file>. If @@ -78,7 +86,12 @@ OPTIONS Die if the pack contains broken links. For internal use only. --fsck-objects:: - Die if the pack contains broken objects. For internal use only. + For internal use only. ++ +Die if the pack contains broken objects. If the pack contains a tree +pointing to a .gitmodules blob that does not exist, prints the hash of +that blob (for the caller to check) after the hash that goes into the +name of the pack/idx file (see "Notes"). --threads=<n>:: Specifies the number of threads to spawn when resolving diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 59ecda6c17..b611d80697 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -20,8 +20,9 @@ DESCRIPTION This command creates an empty Git repository - basically a `.git` directory with subdirectories for `objects`, `refs/heads`, -`refs/tags`, and template files. An initial `HEAD` file that -references the HEAD of the master branch is also created. +`refs/tags`, and template files. An initial branch without any +commits will be created (see the `--initial-branch` option below +for its name). If the `$GIT_DIR` environment variable is set then it specifies a path to use instead of `./.git` for the base of the repository. @@ -73,8 +74,10 @@ If this is reinitialization, the repository will be moved to the specified path. -b <branch-name>:: --initial-branch=<branch-name>:: -Use the specified name for the initial branch in the newly created repository. -If not specified, fall back to the default name: `master`. +Use the specified name for the initial branch in the newly created +repository. If not specified, fall back to the default name (currently +`master`, but this is subject to change in the future; the name can be +customized via the `init.defaultBranch` configuration variable). --shared[=(false|true|umask|group|all|world|everybody|0xxx)]:: diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index dd189a353a..1bbf865a1b 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -107,47 +107,15 @@ DIFF FORMATTING By default, `git log` does not generate any diff output. The options below can be used to show the changes made by each commit. -Note that unless one of `-c`, `--cc`, or `-m` is given, merge commits -will never show a diff, even if a diff format like `--patch` is -selected, nor will they match search options like `-S`. The exception is -when `--first-parent` is in use, in which merges are treated like normal -single-parent commits (this can be overridden by providing a -combined-diff option or with `--no-diff-merges`). - --c:: - With this option, diff output for a merge commit - shows the differences from each of the parents to the merge result - simultaneously instead of showing pairwise diff between a parent - and the result one at a time. Furthermore, it lists only files - which were modified from all parents. - ---cc:: - This flag implies the `-c` option and further compresses the - patch output by omitting uninteresting hunks whose contents in - the parents have only two variants and the merge result picks - one of them without modification. - ---combined-all-paths:: - This flag causes combined diffs (used for merge commits) to - list the name of the file from all parents. It thus only has - effect when -c or --cc are specified, and is likely only - useful if filename changes are detected (i.e. when either - rename or copy detection have been requested). - --m:: - This flag makes the merge commits show the full diff like - regular commits; for each merge parent, a separate log entry - and diff is generated. An exception is that only diff against - the first parent is shown when `--first-parent` option is given; - in that case, the output represents the changes the merge - brought _into_ the then-current branch. - ---diff-merges=off:: ---no-diff-merges:: - Disable output of diffs for merge commits (default). Useful to - override `-m`, `-c`, or `--cc`. +Note that unless one of `--diff-merges` variants (including short +`-m`, `-c`, and `--cc` options) is explicitly given, merge commits +will not show a diff, even if a diff format like `--patch` is +selected, nor will they match search options like `-S`. The exception +is when `--first-parent` is in use, in which case `first-parent` is +the default format. :git-log: 1 +:diff-merges-default: `off` include::diff-options.txt[] include::diff-generate-patch.txt[] diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index cbcf5263dd..6d11ab506b 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -13,6 +13,7 @@ SYNOPSIS (--[cached|deleted|others|ignored|stage|unmerged|killed|modified])* (-[c|d|o|i|s|u|k|m])* [--eol] + [--deduplicate] [-x <pattern>|--exclude=<pattern>] [-X <file>|--exclude-from=<file>] [--exclude-per-directory=<file>] @@ -23,9 +24,8 @@ SYNOPSIS DESCRIPTION ----------- -This merges the file listing in the directory cache index with the -actual working directory list, and shows different combinations of the -two. +This merges the file listing in the index with the actual working +directory list, and shows different combinations of the two. One or more of the options below may be used to determine the files shown: @@ -81,6 +81,13 @@ OPTIONS \0 line termination on output and do not quote filenames. See OUTPUT below for more information. +--deduplicate:: + When only filenames are shown, suppress duplicates that may + come from having multiple stages during a merge, or giving + `--deleted` and `--modified` option at the same time. + When any of the `-t`, `--unmerged`, or `--stage` option is + in use, this option has no effect. + -x <pattern>:: --exclude=<pattern>:: Skip untracked files matching pattern. diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 7a6aed0e30..d343f040f5 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -53,7 +53,7 @@ character. The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME transfer encoding, re-coded in the charset specified by - i18n.commitencoding (defaulting to UTF-8) by transliterating + `i18n.commitEncoding` (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset @@ -61,7 +61,7 @@ conversion, even with this flag. --encoding=<encoding>:: Similar to -u. But when re-coding, the charset specified here is - used instead of the one specified by i18n.commitencoding or UTF-8. + used instead of the one specified by `i18n.commitEncoding` or UTF-8. -n:: Disable all charset re-coding of the metadata. diff --git a/Documentation/git-maintenance.txt b/Documentation/git-maintenance.txt index 6fec1eb8dc..80ddd33ceb 100644 --- a/Documentation/git-maintenance.txt +++ b/Documentation/git-maintenance.txt @@ -38,7 +38,7 @@ register:: for running in the background without disrupting foreground processes. + -The `register` subcomand will also set the `maintenance.strategy` config +The `register` subcommand will also set the `maintenance.strategy` config value to `incremental`, if this value is not previously set. The `incremental` strategy uses the following schedule for each maintenance task: @@ -101,7 +101,7 @@ This is done to avoid disrupting the remote-tracking branches. The end users expect these refs to stay unmoved unless they initiate a fetch. With prefetch task, however, the objects necessary to complete a later real fetch would already be obtained, so the real fetch would go faster. In the ideal case, -it will just become an update to bunch of remote-tracking branches without +it will just become an update to a bunch of remote-tracking branches without any object transfer. gc:: @@ -145,6 +145,12 @@ incremental-repack:: which is a special case that attempts to repack all pack-files into a single pack-file. +pack-refs:: + The `pack-refs` task collects the loose reference files and + collects them into a single file. This speeds up operations that + need to iterate across many references. See linkgit:git-pack-refs[1] + for more information. + OPTIONS ------- --auto:: @@ -218,6 +224,122 @@ Further, the `git gc` command should not be combined with but does not take the lock in the same way as `git maintenance run`. If possible, use `git maintenance run --task=gc` instead of `git gc`. +The following sections describe the mechanisms put in place to run +background maintenance by `git maintenance start` and how to customize +them. + +BACKGROUND MAINTENANCE ON POSIX SYSTEMS +--------------------------------------- + +The standard mechanism for scheduling background tasks on POSIX systems +is cron(8). This tool executes commands based on a given schedule. The +current list of user-scheduled tasks can be found by running `crontab -l`. +The schedule written by `git maintenance start` is similar to this: + +----------------------------------------------------------------------- +# BEGIN GIT MAINTENANCE SCHEDULE +# The following schedule was created by Git +# Any edits made in this region might be +# replaced in the future by a Git command. + +0 1-23 * * * "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=hourly +0 0 * * 1-6 "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=daily +0 0 * * 0 "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=weekly + +# END GIT MAINTENANCE SCHEDULE +----------------------------------------------------------------------- + +The comments are used as a region to mark the schedule as written by Git. +Any modifications within this region will be completely deleted by +`git maintenance stop` or overwritten by `git maintenance start`. + +The `crontab` entry specifies the full path of the `git` executable to +ensure that the executed `git` command is the same one with which +`git maintenance start` was issued independent of `PATH`. If the same user +runs `git maintenance start` with multiple Git executables, then only the +latest executable is used. + +These commands use `git for-each-repo --config=maintenance.repo` to run +`git maintenance run --schedule=<frequency>` on each repository listed in +the multi-valued `maintenance.repo` config option. These are typically +loaded from the user-specific global config. The `git maintenance` process +then determines which maintenance tasks are configured to run on each +repository with each `<frequency>` using the `maintenance.<task>.schedule` +config options. These values are loaded from the global or repository +config values. + +If the config values are insufficient to achieve your desired background +maintenance schedule, then you can create your own schedule. If you run +`crontab -e`, then an editor will load with your user-specific `cron` +schedule. In that editor, you can add your own schedule lines. You could +start by adapting the default schedule listed earlier, or you could read +the crontab(5) documentation for advanced scheduling techniques. Please +do use the full path and `--exec-path` techniques from the default +schedule to ensure you are executing the correct binaries in your +schedule. + + +BACKGROUND MAINTENANCE ON MACOS SYSTEMS +--------------------------------------- + +While macOS technically supports `cron`, using `crontab -e` requires +elevated privileges and the executed process does not have a full user +context. Without a full user context, Git and its credential helpers +cannot access stored credentials, so some maintenance tasks are not +functional. + +Instead, `git maintenance start` interacts with the `launchctl` tool, +which is the recommended way to schedule timed jobs in macOS. Scheduling +maintenance through `git maintenance (start|stop)` requires some +`launchctl` features available only in macOS 10.11 or later. + +Your user-specific scheduled tasks are stored as XML-formatted `.plist` +files in `~/Library/LaunchAgents/`. You can see the currently-registered +tasks using the following command: + +----------------------------------------------------------------------- +$ ls ~/Library/LaunchAgents/org.git-scm.git* +org.git-scm.git.daily.plist +org.git-scm.git.hourly.plist +org.git-scm.git.weekly.plist +----------------------------------------------------------------------- + +One task is registered for each `--schedule=<frequency>` option. To +inspect how the XML format describes each schedule, open one of these +`.plist` files in an editor and inspect the `<array>` element following +the `<key>StartCalendarInterval</key>` element. + +`git maintenance start` will overwrite these files and register the +tasks again with `launchctl`, so any customizations should be done by +creating your own `.plist` files with distinct names. Similarly, the +`git maintenance stop` command will unregister the tasks with `launchctl` +and delete the `.plist` files. + +To create more advanced customizations to your background tasks, see +launchctl.plist(5) for more information. + + +BACKGROUND MAINTENANCE ON WINDOWS SYSTEMS +----------------------------------------- + +Windows does not support `cron` and instead has its own system for +scheduling background tasks. The `git maintenance start` command uses +the `schtasks` command to submit tasks to this system. You can inspect +all background tasks using the Task Scheduler application. The tasks +added by Git have names of the form `Git Maintenance (<frequency>)`. +The Task Scheduler GUI has ways to inspect these tasks, but you can also +export the tasks to XML files and view the details there. + +Note that since Git is a console application, these background tasks +create a console window visible to the current user. This can be changed +manually by selecting the "Run whether user is logged in or not" option +in Task Scheduler. This change requires a password input, which is why +`git maintenance start` does not select it by default. + +If you want to customize the background tasks, please rename the tasks +so future calls to `git maintenance (start|stop)` do not overwrite your +custom tasks. + GIT --- diff --git a/Documentation/git-mergetool--lib.txt b/Documentation/git-mergetool--lib.txt index 4da9d24096..3e8f59ac0e 100644 --- a/Documentation/git-mergetool--lib.txt +++ b/Documentation/git-mergetool--lib.txt @@ -38,6 +38,10 @@ get_merge_tool_cmd:: get_merge_tool_path:: returns the custom path for a merge tool. +initialize_merge_tool:: + bring merge tool specific functions into scope so they can be used or + overridden. + run_merge_tool:: launches a merge tool given the tool name and a true/false flag to indicate whether a merge base is present. diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 6b14702e78..e587c7763a 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -99,6 +99,10 @@ success of the resolution after the custom tool has exited. (see linkgit:git-config[1]). To cancel `diff.orderFile`, use `-O/dev/null`. +CONFIGURATION +------------- +include::config/mergetool.txt[] + TEMPORARY FILES --------------- `git mergetool` creates `*.orig` backup files while resolving merges. diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt index fa6a756123..17a2603a60 100644 --- a/Documentation/git-mktag.txt +++ b/Documentation/git-mktag.txt @@ -3,7 +3,7 @@ git-mktag(1) NAME ---- -git-mktag - Creates a tag object +git-mktag - Creates a tag object with extra validation SYNOPSIS @@ -11,25 +11,52 @@ SYNOPSIS [verse] 'git mktag' +OPTIONS +------- + +--strict:: + By default mktag turns on the equivalent of + linkgit:git-fsck[1] `--strict` mode. Use `--no-strict` to + disable it. + DESCRIPTION ----------- -Reads a tag contents on standard input and creates a tag object -that can also be used to sign other objects. -The output is the new tag's <object> identifier. +Reads a tag contents on standard input and creates a tag object. The +output is the new tag's <object> identifier. + +This command is mostly equivalent to linkgit:git-hash-object[1] +invoked with `-t tag -w --stdin`. I.e. both of these will create and +write a tag found in `my-tag`: + + git mktag <my-tag + git hash-object -t tag -w --stdin <my-tag + +The difference is that mktag will die before writing the tag if the +tag doesn't pass a linkgit:git-fsck[1] check. + +The "fsck" check done mktag is stricter than what linkgit:git-fsck[1] +would run by default in that all `fsck.<msg-id>` messages are promoted +from warnings to errors (so e.g. a missing "tagger" line is an error). + +Extra headers in the object are also an error under mktag, but ignored +by linkgit:git-fsck[1]. This extra check can be turned off by setting +the appropriate `fsck.<msg-id>` varible: + + git -c fsck.extraHeaderEntry=ignore mktag <my-tag-with-headers Tag Format ---------- A tag signature file, to be fed to this command's standard input, has a very simple fixed format: four lines of - object <sha1> + object <hash> type <typename> tag <tagname> tagger <tagger> followed by some 'optional' free-form message (some tags created -by older Git may not have `tagger` line). The message, when +by older Git may not have `tagger` line). The message, when it exists, is separated by a blank line from the header. The message part may contain a signature that Git itself doesn't care about, but that can be verified with gpg. diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index ec233ac0c1..f89e68b424 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -397,7 +397,7 @@ changelist text. Exiting with a non-zero status from the script will abort the process. The purpose of the hook is to edit the message file in place, -and it is not supressed by the `--no-verify` option. This hook +and it is not suppressed by the `--no-verify` option. This hook is called even if `--prepare-p4-only` is set. p4-changelist diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 54d715ead1..f85cb7ea93 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -400,6 +400,17 @@ Note that we pick a single island for each regex to go into, using "last one wins" ordering (which allows repo-specific config to take precedence over user-wide config, and so forth). + +CONFIGURATION +------------- + +Various configuration variables affect packing, see +linkgit:git-config[1] (search for "pack" and "delta"). + +Notably, delta compression is not used on objects larger than the +`core.bigFileThreshold` configuration variable and on files with the +attribute `delta` set to false. + SEE ALSO -------- linkgit:git-rev-list[1] diff --git a/Documentation/git-range-diff.txt b/Documentation/git-range-diff.txt index 9701c1e5fd..fe350d7f40 100644 --- a/Documentation/git-range-diff.txt +++ b/Documentation/git-range-diff.txt @@ -10,6 +10,7 @@ SYNOPSIS [verse] 'git range-diff' [--color=[<when>]] [--no-color] [<diff-options>] [--no-dual-color] [--creation-factor=<factor>] + [--left-only | --right-only] ( <range1> <range2> | <rev1>...<rev2> | <base> <rev1> <rev2> ) DESCRIPTION @@ -28,6 +29,17 @@ Finally, the list of matching commits is shown in the order of the second commit range, with unmatched commits being inserted just after all of their ancestors have been shown. +There are three ways to specify the commit ranges: + +- `<range1> <range2>`: Either commit range can be of the form + `<base>..<rev>`, `<rev>^!` or `<rev>^-<n>`. See `SPECIFYING RANGES` + in linkgit:gitrevisions[7] for more details. + +- `<rev1>...<rev2>`. This is equivalent to + `<rev2>..<rev1> <rev1>..<rev2>`. + +- `<base> <rev1> <rev2>`: This is equivalent to `<base>..<rev1> + <base>..<rev2>`. OPTIONS ------- @@ -57,6 +69,14 @@ to revert to color all lines according to the outer diff markers See the ``Algorithm`` section below for an explanation why this is needed. +--left-only:: + Suppress commits that are missing from the first specified range + (or the "left range" when using the `<rev1>...<rev2>` format). + +--right-only:: + Suppress commits that are missing from the second specified range + (or the "right range" when using the `<rev1>...<rev2>` format). + --[no-]notes[=<ref>]:: This flag is passed to the `git log` program (see linkgit:git-log[1]) that generates the patches. diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 92f146d27d..fbd4b4ae06 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -165,9 +165,12 @@ depth is 4095. Pass the `--delta-islands` option to `git-pack-objects`, see linkgit:git-pack-objects[1]. -Configuration +CONFIGURATION ------------- +Various configuration variables affect packing, see +linkgit:git-config[1] (search for "pack" and "delta"). + By default, the command passes `--delta-base-offset` option to 'git pack-objects'; this typically results in slightly smaller packs, but the generated packs are incompatible with versions of Git older than @@ -178,6 +181,10 @@ need to set the configuration variable `repack.UseDeltaBaseOffset` to is unaffected by this option as the conversion is performed on the fly as needed in that case. +Delta compression is not used on objects larger than the +`core.bigFileThreshold` configuration variable and on files with the +attribute `delta` set to false. + SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 5da66232dc..20bb8e8217 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -31,6 +31,99 @@ include::rev-list-options.txt[] include::pretty-formats.txt[] +EXAMPLES +-------- + +* Print the list of commits reachable from the current branch. ++ +---------- +git rev-list HEAD +---------- + +* Print the list of commits on this branch, but not present in the + upstream branch. ++ +---------- +git rev-list @{upstream}..HEAD +---------- + +* Format commits with their author and commit message (see also the + porcelain linkgit:git-log[1]). ++ +---------- +git rev-list --format=medium HEAD +---------- + +* Format commits along with their diffs (see also the porcelain + linkgit:git-log[1], which can do this in a single process). ++ +---------- +git rev-list HEAD | +git diff-tree --stdin --format=medium -p +---------- + +* Print the list of commits on the current branch that touched any + file in the `Documentation` directory. ++ +---------- +git rev-list HEAD -- Documentation/ +---------- + +* Print the list of commits authored by you in the past year, on + any branch, tag, or other ref. ++ +---------- +git rev-list --author=you@example.com --since=1.year.ago --all +---------- + +* Print the list of objects reachable from the current branch (i.e., all + commits and the blobs and trees they contain). ++ +---------- +git rev-list --objects HEAD +---------- + +* Compare the disk size of all reachable objects, versus those + reachable from reflogs, versus the total packed size. This can tell + you whether running `git repack -ad` might reduce the repository size + (by dropping unreachable objects), and whether expiring reflogs might + help. ++ +---------- +# reachable objects +git rev-list --disk-usage --objects --all +# plus reflogs +git rev-list --disk-usage --objects --all --reflog +# total disk size used +du -c .git/objects/pack/*.pack .git/objects/??/* +# alternative to du: add up "size" and "size-pack" fields +git count-objects -v +---------- + +* Report the disk size of each branch, not including objects used by the + current branch. This can find outliers that are contributing to a + bloated repository size (e.g., because somebody accidentally committed + large build artifacts). ++ +---------- +git for-each-ref --format='%(refname)' | +while read branch +do + size=$(git rev-list --disk-usage --objects HEAD..$branch) + echo "$size $branch" +done | +sort -n +---------- + +* Compare the on-disk size of branches in one group of refs, excluding + another. If you co-mingle objects from multiple remotes in a single + repository, this can show which remotes are contributing to the + repository size (taking the size of `origin` as a baseline). ++ +---------- +git rev-list --disk-usage --objects --remotes=$suspect --not --remotes=origin +---------- + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 5013daa6ef..6b8ca085aa 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -212,6 +212,18 @@ Options for Files Only the names of the variables are listed, not their value, even if they are set. +--path-format=(absolute|relative):: + Controls the behavior of certain other options. If specified as absolute, the + paths printed by those options will be absolute and canonical. If specified as + relative, the paths will be relative to the current working directory if that + is possible. The default is option specific. ++ +This option may be specified multiple times and affects only the arguments that +follow it on the command line, either to the end of the command line or the next +instance of this option. + +The following options are modified by `--path-format`: + --git-dir:: Show `$GIT_DIR` if defined. Otherwise show the path to the .git directory. The path shown, when relative, is @@ -221,27 +233,9 @@ If `$GIT_DIR` is not defined and the current directory is not detected to lie in a Git repository or work tree print a message to stderr and exit with nonzero status. ---absolute-git-dir:: - Like `--git-dir`, but its output is always the canonicalized - absolute path. - --git-common-dir:: Show `$GIT_COMMON_DIR` if defined, else `$GIT_DIR`. ---is-inside-git-dir:: - When the current working directory is below the repository - directory print "true", otherwise "false". - ---is-inside-work-tree:: - When the current working directory is inside the work tree of the - repository print "true", otherwise "false". - ---is-bare-repository:: - When the repository is bare print "true", otherwise "false". - ---is-shallow-repository:: - When the repository is shallow print "true", otherwise "false". - --resolve-git-dir <path>:: Check if <path> is a valid repository or a gitfile that points at a valid repository, and print the location of the @@ -255,19 +249,9 @@ print a message to stderr and exit with nonzero status. $GIT_OBJECT_DIRECTORY is set to /foo/bar then "git rev-parse --git-path objects/abc" returns /foo/bar/abc. ---show-cdup:: - When the command is invoked from a subdirectory, show the - path of the top-level directory relative to the current - directory (typically a sequence of "../", or an empty string). - ---show-prefix:: - When the command is invoked from a subdirectory, show the - path of the current directory relative to the top-level - directory. - --show-toplevel:: - Show the absolute path of the top-level directory of the working - tree. If there is no working tree, report an error. + Show the (by default, absolute) path of the top-level directory + of the working tree. If there is no working tree, report an error. --show-superproject-working-tree:: Show the absolute path of the root of the superproject's @@ -279,6 +263,36 @@ print a message to stderr and exit with nonzero status. Show the path to the shared index file in split index mode, or empty if not in split-index mode. +The following options are unaffected by `--path-format`: + +--absolute-git-dir:: + Like `--git-dir`, but its output is always the canonicalized + absolute path. + +--is-inside-git-dir:: + When the current working directory is below the repository + directory print "true", otherwise "false". + +--is-inside-work-tree:: + When the current working directory is inside the work tree of the + repository print "true", otherwise "false". + +--is-bare-repository:: + When the repository is bare print "true", otherwise "false". + +--is-shallow-repository:: + When the repository is shallow print "true", otherwise "false". + +--show-cdup:: + When the command is invoked from a subdirectory, show the + path of the top-level directory relative to the current + directory (typically a sequence of "../", or an empty string). + +--show-prefix:: + When the command is invoked from a subdirectory, show the + path of the current directory relative to the top-level + directory. + --show-object-format[=(storage|input|output)]:: Show the object format (hash algorithm) used for the repository for storage inside the `.git` directory, input, or output. For diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index b7bbbeadef..93708aefea 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -494,10 +494,14 @@ edit ~/.gitconfig to specify your account settings: smtpServerPort = 587 ---- -If you have multifactor authentication setup on your gmail account, you will +If you have multi-factor authentication set up on your Gmail account, you will need to generate an app-specific password for use with 'git send-email'. Visit https://security.google.com/settings/security/apppasswords to create it. +If you do not have multi-factor authentication set up on your Gmail account, +you will need to allow less secure app access. Visit +https://myaccount.google.com/lesssecureapps to enable it. + Once your commits are ready to be sent to the mailing list, run the following commands: diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index fd93cd41e9..c9c7f3065c 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -111,11 +111,11 @@ include::rev-list-options.txt[] MAPPING AUTHORS --------------- -The `.mailmap` feature is used to coalesce together commits by the same -person in the shortlog, where their name and/or email address was -spelled differently. +See linkgit:gitmailmap[5]. -include::mailmap.txt[] +Note that if `git shortlog` is run outside of a repository (to process +log contents on standard input), it will look for a `.mailmap` file in +the current directory. GIT --- diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index fcf528c1b3..2b1bc7288d 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -45,10 +45,13 @@ include::pretty-options.txt[] include::pretty-formats.txt[] -COMMON DIFF OPTIONS -------------------- +DIFF FORMATTING +--------------- +The options below can be used to change the way `git show` generates +diff output. :git-log: 1 +:diff-merges-default: `dense-combined` include::diff-options.txt[] include::diff-generate-patch.txt[] diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 31f1beb65b..f1197d641b 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -8,8 +8,8 @@ git-stash - Stash the changes in a dirty working directory away SYNOPSIS -------- [verse] -'git stash' list [<options>] -'git stash' show [<options>] [<stash>] +'git stash' list [<log-options>] +'git stash' show [<diff-options>] [<stash>] 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] @@ -67,7 +67,7 @@ save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q Instead, all non-option arguments are concatenated to form the stash message. -list [<options>]:: +list [<log-options>]:: List the stash entries that you currently have. Each 'stash entry' is listed with its name (e.g. `stash@{0}` is the latest entry, `stash@{1}` is @@ -83,7 +83,7 @@ stash@{1}: On master: 9cc0589... Add git-stash The command takes options applicable to the 'git log' command to control what is shown and how. See linkgit:git-log[1]. -show [<options>] [<stash>]:: +show [<diff-options>] [<stash>]:: Show the changes recorded in the stash entry as a diff between the stashed contents and the commit back when the stash entry was first diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 7731b45f07..83f38e3198 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -130,7 +130,7 @@ ignored, then the directory is not shown, but all contents are shown. --column[=<options>]:: --no-column:: Display untracked files in columns. See configuration variable - column.status for option syntax.`--column` and `--no-column` + `column.status` for option syntax. `--column` and `--no-column` without options are equivalent to 'always' and 'never' respectively. @@ -184,11 +184,26 @@ characters, that field will be quoted in the manner of a C string literal: surrounded by ASCII double quote (34) characters, and with interior special characters backslash-escaped. -For paths with merge conflicts, `X` and `Y` show the modification -states of each side of the merge. For paths that do not have merge -conflicts, `X` shows the status of the index, and `Y` shows the status -of the work tree. For untracked paths, `XY` are `??`. Other status -codes can be interpreted as follows: +There are three different types of states that are shown using this format, and +each one uses the `XY` syntax differently: + +* When a merge is occurring and the merge was successful, or outside of a merge + situation, `X` shows the status of the index and `Y` shows the status of the + working tree. +* When a merge conflict has occurred and has not yet been resolved, `X` and `Y` + show the state introduced by each head of the merge, relative to the common + ancestor. These paths are said to be _unmerged_. +* When a path is untracked, `X` and `Y` are always the same, since they are + unknown to the index. `??` is used for untracked paths. Ignored files are + not listed unless `--ignored` is used; if it is, ignored files are indicated + by `!!`. + +Note that the term _merge_ here also includes rebases using the default +`--merge` strategy, cherry-picks, and anything else using the merge machinery. + +In the following table, these three classes are shown in separate sections, and +these characters are used for `X` and `Y` fields for the first two sections that +show tracked paths: * ' ' = unmodified * 'M' = modified @@ -198,9 +213,6 @@ codes can be interpreted as follows: * 'C' = copied * 'U' = updated but unmerged -Ignored files are not listed, unless `--ignored` option is in effect, -in which case `XY` are `!!`. - .... X Y Meaning ------------------------------------------------- diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 56656d1be6..31a97a1b6c 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -134,7 +134,7 @@ options for details. --column[=<options>]:: --no-column:: Display tag listing in columns. See configuration variable - column.tag for option syntax.`--column` and `--no-column` + `column.tag` for option syntax. `--column` and `--no-column` without options are equivalent to 'always' and 'never' respectively. + This option is only applicable when listing tags without annotation lines. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 1489cb09a0..2853f168d9 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -30,9 +30,8 @@ SYNOPSIS DESCRIPTION ----------- -Modifies the index or directory cache. Each file mentioned is updated -into the index and any 'unmerged' or 'needs updating' state is -cleared. +Modifies the index. Each file mentioned is updated into the index and +any 'unmerged' or 'needs updating' state is cleared. See also linkgit:git-add[1] for a more user-friendly way to do some of the most common operations on the index. diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index af06128cc9..f1bb1fa5f5 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -97,8 +97,9 @@ list:: List details of each working tree. The main working tree is listed first, followed by each of the linked working trees. The output details include whether the working tree is bare, the revision currently checked out, the -branch currently checked out (or "detached HEAD" if none), and "locked" if -the worktree is locked. +branch currently checked out (or "detached HEAD" if none), "locked" if +the worktree is locked, "prunable" if the worktree can be pruned by `prune` +command. lock:: @@ -143,6 +144,11 @@ locate it. Running `repair` within the recently-moved working tree will reestablish the connection. If multiple linked working trees are moved, running `repair` from any working tree with each tree's new `<path>` as an argument, will reestablish the connection to all the specified paths. ++ +If both the main working tree and linked working trees have been moved +manually, then running `repair` in the main working tree and specifying the +new `<path>` of each linked working tree will reestablish all connections +in both directions. unlock:: @@ -226,9 +232,14 @@ This can also be set up as the default behaviour by using the -v:: --verbose:: With `prune`, report all removals. ++ +With `list`, output additional information about worktrees (see below). --expire <time>:: With `prune`, only expire unused working trees older than `<time>`. ++ +With `list`, annotate missing working trees as prunable if they are +older than `<time>`. --reason <string>:: With `lock`, an explanation why the working tree is locked. @@ -367,13 +378,46 @@ $ git worktree list /path/to/other-linked-worktree 1234abc (detached HEAD) ------------ +The command also shows annotations for each working tree, according to its state. +These annotations are: + + * `locked`, if the working tree is locked. + * `prunable`, if the working tree can be pruned via `git worktree prune`. + +------------ +$ git worktree list +/path/to/linked-worktree abcd1234 [master] +/path/to/locked-worktreee acbd5678 (brancha) locked +/path/to/prunable-worktree 5678abc (detached HEAD) prunable +------------ + +For these annotations, a reason might also be available and this can be +seen using the verbose mode. The annotation is then moved to the next line +indented followed by the additional information. + +------------ +$ git worktree list --verbose +/path/to/linked-worktree abcd1234 [master] +/path/to/locked-worktree-no-reason abcd5678 (detached HEAD) locked +/path/to/locked-worktree-with-reason 1234abcd (brancha) + locked: working tree path is mounted on a portable device +/path/to/prunable-worktree 5678abc1 (detached HEAD) + prunable: gitdir file points to non-existent location +------------ + +Note that the annotation is moved to the next line if the additional +information is available, otherwise it stays on the same line as the +working tree itself. + Porcelain Format ~~~~~~~~~~~~~~~~ The porcelain format has a line per attribute. Attributes are listed with a label and value separated by a single space. Boolean attributes (like `bare` and `detached`) are listed as a label only, and are present only -if the value is true. The first attribute of a working tree is always -`worktree`, an empty line indicates the end of the record. For example: +if the value is true. Some attributes (like `locked`) can be listed as a label +only or with a value depending upon whether a reason is available. The first +attribute of a working tree is always `worktree`, an empty line indicates the +end of the record. For example: ------------ $ git worktree list --porcelain @@ -388,6 +432,33 @@ worktree /path/to/other-linked-worktree HEAD 1234abc1234abc1234abc1234abc1234abc1234a detached +worktree /path/to/linked-worktree-locked-no-reason +HEAD 5678abc5678abc5678abc5678abc5678abc5678c +branch refs/heads/locked-no-reason +locked + +worktree /path/to/linked-worktree-locked-with-reason +HEAD 3456def3456def3456def3456def3456def3456b +branch refs/heads/locked-with-reason +locked reason why is locked + +worktree /path/to/linked-worktree-prunable +HEAD 1233def1234def1234def1234def1234def1234b +detached +prunable gitdir file points to non-existent location + +------------ + +If the lock reason contains "unusual" characters such as newline, they +are escaped and the entire reason is quoted as explained for the +configuration variable `core.quotePath` (see linkgit:git-config[1]). +For Example: + +------------ +$ git worktree list --porcelain +... +locked "reason\nwhy is locked" +... ------------ EXAMPLES diff --git a/Documentation/git.txt b/Documentation/git.txt index c463b937a8..3a9c44987f 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -13,7 +13,7 @@ SYNOPSIS [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] [-p|--paginate|-P|--no-pager] [--no-replace-objects] [--bare] [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] - [--super-prefix=<path>] + [--super-prefix=<path>] [--config-env <name>=<envvar>] <command> [<args>] DESCRIPTION @@ -80,6 +80,28 @@ config file). Including the equals but with an empty value (like `git -c foo.bar= ...`) sets `foo.bar` to the empty string which `git config --type=bool` will convert to `false`. +--config-env=<name>=<envvar>:: + Like `-c <name>=<value>`, give configuration variable + '<name>' a value, where <envvar> is the name of an + environment variable from which to retrieve the value. Unlike + `-c` there is no shortcut for directly setting the value to an + empty string, instead the environment variable itself must be + set to the empty string. It is an error if the `<envvar>` does not exist + in the environment. `<envvar>` may not contain an equals sign + to avoid ambiguity with `<name>` containing one. ++ +This is useful for cases where you want to pass transitory +configuration options to git, but are doing so on OS's where +other processes might be able to read your cmdline +(e.g. `/proc/self/cmdline`), but not your environ +(e.g. `/proc/self/environ`). That behavior is the default on +Linux, but may not be on your system. ++ +Note that this might add security for variables such as +`http.extraHeader` where the sensitive information is part of +the value, but not e.g. `url.<base>.insteadOf` where the +sensitive information can be part of the key. + --exec-path[=<path>]:: Path to wherever your core Git programs are installed. This can also be controlled by setting the GIT_EXEC_PATH @@ -609,8 +631,8 @@ other `GIT_SEQUENCE_EDITOR`:: This environment variable overrides the configured Git editor when editing the todo list of an interactive rebase. See also - linkit::git-rebase[1] and the `sequence.editor` option in - linkit::git-config[1]. + linkgit:git-rebase[1] and the `sequence.editor` option in + linkgit:git-config[1]. `GIT_SSH`:: `GIT_SSH_COMMAND`:: diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index c970d9fe43..1c7269655f 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -74,6 +74,7 @@ into another list. There are currently 5 such transformations: - diffcore-merge-broken - diffcore-pickaxe - diffcore-order +- diffcore-rotate These are applied in sequence. The set of filepairs 'git diff-{asterisk}' commands find are used as the input to diffcore-break, and @@ -168,6 +169,26 @@ a similarity score different from the default of 50% by giving a number after the "-M" or "-C" option (e.g. "-M8" to tell it to use 8/10 = 80%). +Note that when rename detection is on but both copy and break +detection are off, rename detection adds a preliminary step that first +checks if files are moved across directories while keeping their +filename the same. If there is a file added to a directory whose +contents is sufficiently similar to a file with the same name that got +deleted from a different directory, it will mark them as renames and +exclude them from the later quadratic step (the one that pairwise +compares all unmatched files to find the "best" matches, determined by +the highest content similarity). So, for example, if a deleted +docs/ext.txt and an added docs/config/ext.txt are similar enough, they +will be marked as a rename and prevent an added docs/ext.md that may +be even more similar to the deleted docs/ext.txt from being considered +as the rename destination in the later step. For this reason, the +preliminary "match same filename" step uses a bit higher threshold to +mark a file pair as a rename and stop considering other candidates for +better matches. At most, one comparison is done per file in this +preliminary pass; so if there are several remaining ext.txt files +throughout the directory hierarchy after exact rename detection, this +preliminary step will be skipped for those files. + Note. When the "-C" option is used with `--find-copies-harder` option, 'git diff-{asterisk}' commands feed unmodified filepairs to diffcore mechanism as well as modified ones. This lets the copy @@ -276,6 +297,26 @@ Documentation t ------------------------------------------------ +diffcore-rotate: For Changing At Which Path Output Starts +--------------------------------------------------------- + +This transformation takes one pathname, and rotates the set of +filepairs so that the filepair for the given pathname comes first, +optionally discarding the paths that come before it. This is used +to implement the `--skip-to` and the `--rotate-to` options. It is +an error when the specified pathname is not in the set of filepairs, +but it is not useful to error out when used with "git log" family of +commands, because it is unreasonable to expect that a given path +would be modified by each and every commit shown by the "git log" +command. For this reason, when used with "git log", the filepair +that sorts the same as, or the first one that sorts after, the given +pathname is where the output starts. + +Use of this transformation combined with diffcore-order will produce +unexpected results, as the input to this transformation is likely +not sorted when diffcore-order is in effect. + + SEE ALSO -------- linkgit:git-diff[1], diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index ffccfc7760..1f3b57d04d 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -644,7 +644,7 @@ changelist text. Exiting with a non-zero status from the script will abort the process. The purpose of the hook is to edit the message file in place, -and it is not supressed by the `--no-verify` option. This hook +and it is not suppressed by the `--no-verify` option. This hook is called even if `--prepare-p4-only` is set. Run `git-p4 submit --help` for details. diff --git a/Documentation/gitmailmap.txt b/Documentation/gitmailmap.txt new file mode 100644 index 0000000000..3fb39f801f --- /dev/null +++ b/Documentation/gitmailmap.txt @@ -0,0 +1,123 @@ +gitmailmap(5) +============= + +NAME +---- +gitmailmap - Map author/committer names and/or E-Mail addresses + +SYNOPSIS +-------- +$GIT_WORK_TREE/.mailmap + + +DESCRIPTION +----------- + +If the file `.mailmap` exists at the toplevel of the repository, or at +the location pointed to by the `mailmap.file` or `mailmap.blob` +configuration options (see linkgit:git-config[1]), it +is used to map author and committer names and email addresses to +canonical real names and email addresses. + + +SYNTAX +------ + +The '#' character begins a comment to the end of line, blank lines +are ignored. + +In the simple form, each line in the file consists of the canonical +real name of an author, whitespace, and an email address used in the +commit (enclosed by '<' and '>') to map to the name. For example: +-- + Proper Name <commit@email.xx> +-- + +The more complex forms are: +-- + <proper@email.xx> <commit@email.xx> +-- +which allows mailmap to replace only the email part of a commit, and: +-- + Proper Name <proper@email.xx> <commit@email.xx> +-- +which allows mailmap to replace both the name and the email of a +commit matching the specified commit email address, and: +-- + Proper Name <proper@email.xx> Commit Name <commit@email.xx> +-- +which allows mailmap to replace both the name and the email of a +commit matching both the specified commit name and email address. + +Both E-Mails and names are matched case-insensitively. For example +this would also match the 'Commit Name <commit@email.xx>' above: +-- + Proper Name <proper@email.xx> CoMmIt NaMe <CoMmIt@EmAiL.xX> +-- + +EXAMPLES +-------- + +Your history contains commits by two authors, Jane +and Joe, whose names appear in the repository under several forms: + +------------ +Joe Developer <joe@example.com> +Joe R. Developer <joe@example.com> +Jane Doe <jane@example.com> +Jane Doe <jane@laptop.(none)> +Jane D. <jane@desktop.(none)> +------------ + +Now suppose that Joe wants his middle name initial used, and Jane +prefers her family name fully spelled out. A `.mailmap` file to +correct the names would look like: + +------------ +Joe R. Developer <joe@example.com> +Jane Doe <jane@example.com> +Jane Doe <jane@desktop.(none)> +------------ + +Note that there's no need to map the name for '<jane@laptop.(none)>' to +only correct the names. However, leaving the obviously broken +'<jane@laptop.(none)>' and '<jane@desktop.(none)>' E-Mails as-is is +usually not what you want. A `.mailmap` file which also corrects those +is: + +------------ +Joe R. Developer <joe@example.com> +Jane Doe <jane@example.com> <jane@laptop.(none)> +Jane Doe <jane@example.com> <jane@desktop.(none)> +------------ + +Finally, let's say that Joe and Jane shared an E-Mail address, but not +a name, e.g. by having these two commits in the history generated by a +bug reporting system. I.e. names appearing in history as: + +------------ +Joe <bugs@example.com> +Jane <bugs@example.com> +------------ + +A full `.mailmap` file which also handles those cases (an addition of +two lines to the above example) would be: + +------------ +Joe R. Developer <joe@example.com> +Jane Doe <jane@example.com> <jane@laptop.(none)> +Jane Doe <jane@example.com> <jane@desktop.(none)> +Joe R. Developer <joe@example.com> Joe <bugs@example.com> +Jane Doe <jane@example.com> Jane <bugs@example.com> +------------ + + + +SEE ALSO +-------- +linkgit:git-check-mailmap[1] + + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 539b4e1997..8e333dde1b 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -7,7 +7,7 @@ gitmodules - Defining submodule properties SYNOPSIS -------- -$GIT_WORK_DIR/.gitmodules +$GIT_WORK_TREE/.gitmodules DESCRIPTION @@ -27,19 +27,19 @@ submodule.<name>.path:: Defines the path, relative to the top-level directory of the Git working tree, where the submodule is expected to be checked out. The path name must not end with a `/`. All submodule paths must - be unique within the .gitmodules file. + be unique within the `.gitmodules` file. submodule.<name>.url:: Defines a URL from which the submodule repository can be cloned. This may be either an absolute URL ready to be passed to - linkgit:git-clone[1] or (if it begins with ./ or ../) a location + linkgit:git-clone[1] or (if it begins with `./` or `../`) a location relative to the superproject's origin repository. In addition, there are a number of optional keys: submodule.<name>.update:: Defines the default update procedure for the named submodule, - i.e. how the submodule is updated by "git submodule update" + i.e. how the submodule is updated by the `git submodule update` command in the superproject. This is only used by `git submodule init` to initialize the configuration variable of the same name. Allowed values here are 'checkout', 'rebase', @@ -49,7 +49,7 @@ submodule.<name>.update:: submodule.<name>.branch:: A remote branch name for tracking updates in the upstream submodule. - If the option is not specified, it defaults to the remote 'HEAD'. + If the option is not specified, it defaults to the remote `HEAD`. A special value of `.` is used to indicate that the name of the branch in the submodule should be the same name as the current branch in the current repository. See the `--remote` documentation in @@ -57,14 +57,14 @@ submodule.<name>.branch:: submodule.<name>.fetchRecurseSubmodules:: This option can be used to control recursive fetching of this - submodule. If this option is also present in the submodules entry in - .git/config of the superproject, the setting there will override the - one found in .gitmodules. + submodule. If this option is also present in the submodule's entry in + `.git/config` of the superproject, the setting there will override the + one found in `.gitmodules`. Both settings can be overridden on the command line by using the - "--[no-]recurse-submodules" option to "git fetch" and "git pull". + `--[no-]recurse-submodules` option to `git fetch` and `git pull`. submodule.<name>.ignore:: - Defines under what circumstances "git status" and the diff family show + Defines under what circumstances `git status` and the diff family show a submodule as modified. The following values are supported: + -- @@ -73,7 +73,7 @@ submodule.<name>.ignore:: been staged). dirty;; All changes to the submodule's work tree will be ignored, only - committed differences between the HEAD of the submodule and its + committed differences between the `HEAD` of the submodule and its recorded state in the superproject are taken into account. untracked;; Only untracked files in submodules will be ignored. @@ -84,12 +84,12 @@ submodule.<name>.ignore:: differences, and modifications to tracked and untracked files are shown. This is the default option. -If this option is also present in the submodules entry in .git/config +If this option is also present in the submodule's entry in `.git/config` of the superproject, the setting there will override the one found in -.gitmodules. +`.gitmodules`. Both settings can be overridden on the command line by using the -"--ignore-submodules" option. The 'git submodule' commands are not +`--ignore-submodules` option. The `git submodule` commands are not affected by this setting. -- @@ -102,7 +102,7 @@ submodule.<name>.shallow:: EXAMPLES -------- -Consider the following .gitmodules file: +Consider the following `.gitmodules` file: ---- [submodule "libfoo"] diff --git a/Documentation/i18n.txt b/Documentation/i18n.txt index 7e36e5b55b..6c6baeeeb7 100644 --- a/Documentation/i18n.txt +++ b/Documentation/i18n.txt @@ -38,7 +38,7 @@ mind. a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to - have i18n.commitencoding in `.git/config` file, like this: + have `i18n.commitEncoding` in `.git/config` file, like this: + ------------ [i18n] diff --git a/Documentation/mailmap.txt b/Documentation/mailmap.txt deleted file mode 100644 index 4a8c276529..0000000000 --- a/Documentation/mailmap.txt +++ /dev/null @@ -1,75 +0,0 @@ -If the file `.mailmap` exists at the toplevel of the repository, or at -the location pointed to by the mailmap.file or mailmap.blob -configuration options, it -is used to map author and committer names and email addresses to -canonical real names and email addresses. - -In the simple form, each line in the file consists of the canonical -real name of an author, whitespace, and an email address used in the -commit (enclosed by '<' and '>') to map to the name. For example: --- - Proper Name <commit@email.xx> --- - -The more complex forms are: --- - <proper@email.xx> <commit@email.xx> --- -which allows mailmap to replace only the email part of a commit, and: --- - Proper Name <proper@email.xx> <commit@email.xx> --- -which allows mailmap to replace both the name and the email of a -commit matching the specified commit email address, and: --- - Proper Name <proper@email.xx> Commit Name <commit@email.xx> --- -which allows mailmap to replace both the name and the email of a -commit matching both the specified commit name and email address. - -Example 1: Your history contains commits by two authors, Jane -and Joe, whose names appear in the repository under several forms: - ------------- -Joe Developer <joe@example.com> -Joe R. Developer <joe@example.com> -Jane Doe <jane@example.com> -Jane Doe <jane@laptop.(none)> -Jane D. <jane@desktop.(none)> ------------- - -Now suppose that Joe wants his middle name initial used, and Jane -prefers her family name fully spelled out. A proper `.mailmap` file -would look like: - ------------- -Jane Doe <jane@desktop.(none)> -Joe R. Developer <joe@example.com> ------------- - -Note how there is no need for an entry for `<jane@laptop.(none)>`, because the -real name of that author is already correct. - -Example 2: Your repository contains commits from the following -authors: - ------------- -nick1 <bugs@company.xx> -nick2 <bugs@company.xx> -nick2 <nick2@company.xx> -santa <me@company.xx> -claus <me@company.xx> -CTO <cto@coompany.xx> ------------- - -Then you might want a `.mailmap` file that looks like: ------------- -<cto@company.xx> <cto@coompany.xx> -Some Dude <some@dude.xx> nick1 <bugs@company.xx> -Other Author <other@author.xx> nick2 <bugs@company.xx> -Other Author <other@author.xx> <nick2@company.xx> -Santa Claus <santa.claus@northpole.xx> <me@company.xx> ------------- - -Use hash '#' for comments that are either on their own line, or after -the email address. diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 84bbc7439a..6b59e28d44 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -252,7 +252,15 @@ endif::git-rev-list[] interpreted by linkgit:git-interpret-trailers[1]. The `trailers` string may be followed by a colon - and zero or more comma-separated options: + and zero or more comma-separated options. + If any option is provided multiple times the + last occurance wins. ++ +The boolean options accept an optional value `[=<BOOL>]`. The values +`true`, `false`, `on`, `off` etc. are all accepted. See the "boolean" +sub-section in "EXAMPLES" in linkgit:git-config[1]. If a boolean +option is given with no value, it's enabled. ++ ** 'key=<K>': only show trailers with specified key. Matching is done case-insensitively and trailing colon is optional. If option is given multiple times trailer lines matching any of the keys are @@ -261,27 +269,25 @@ endif::git-rev-list[] desired it can be disabled with `only=false`. E.g., `%(trailers:key=Reviewed-by)` shows trailer lines with key `Reviewed-by`. -** 'only[=val]': select whether non-trailer lines from the trailer - block should be included. The `only` keyword may optionally be - followed by an equal sign and one of `true`, `on`, `yes` to omit or - `false`, `off`, `no` to show the non-trailer lines. If option is - given without value it is enabled. If given multiple times the last - value is used. +** 'only[=<BOOL>]': select whether non-trailer lines from the trailer + block should be included. ** 'separator=<SEP>': specify a separator inserted between trailer lines. When this option is not given each trailer line is terminated with a line feed character. The string SEP may contain the literal formatting codes described above. To use comma as separator one must use `%x2C` as it would otherwise be parsed as - next option. If separator option is given multiple times only the - last one is used. E.g., `%(trailers:key=Ticket,separator=%x2C )` + next option. E.g., `%(trailers:key=Ticket,separator=%x2C )` shows all trailer lines whose key is "Ticket" separated by a comma and a space. -** 'unfold[=val]': make it behave as if interpret-trailer's `--unfold` - option was given. In same way as to for `only` it can be followed - by an equal sign and explicit value. E.g., +** 'unfold[=<BOOL>]': make it behave as if interpret-trailer's `--unfold` + option was given. E.g., `%(trailers:only,unfold=true)` unfolds and shows all trailer lines. -** 'valueonly[=val]': skip over the key part of the trailer line and only - show the value part. Also this optionally allows explicit value. +** 'keyonly[=<BOOL>]': only show the key part of the trailer. +** 'valueonly[=<BOOL>]': only show the value part of the trailer. +** 'key_value_separator=<SEP>': specify a separator inserted between + trailer lines. When this option is not given each trailer key-value + pair is separated by ": ". Otherwise it shares the same semantics + as 'separator=<SEP>' above. NOTE: Some placeholders may depend on other options given to the revision traversal engine. For example, the `%g*` reflog options will diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 002379056a..b1c8f86c6e 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -129,6 +129,11 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). adjusting to updated upstream from time to time, and this option allows you to ignore the individual commits brought in to your history by such a merge. +ifdef::git-log[] ++ +This option also changes default diff format for merge commits +to `first-parent`, see `--diff-merges=first-parent` for details. +endif::git-log[] --not:: Reverses the meaning of the '{caret}' prefix (or lack thereof) @@ -222,6 +227,15 @@ ifdef::git-rev-list[] test the exit status to see if a range of objects is fully connected (or not). It is faster than redirecting stdout to `/dev/null` as the output does not have to be formatted. + +--disk-usage:: + Suppress normal output; instead, print the sum of the bytes used + for on-disk storage by the selected commits or objects. This is + equivalent to piping the output into `git cat-file + --batch-check='%(objectsize:disk)'`, except that it runs much + faster (especially with `--use-bitmap-index`). See the `CAVEATS` + section in linkgit:git-cat-file[1] for the limitations of what + "on-disk storage" means. endif::git-rev-list[] --cherry-mark:: diff --git a/Documentation/technical/chunk-format.txt b/Documentation/technical/chunk-format.txt new file mode 100644 index 0000000000..593614fced --- /dev/null +++ b/Documentation/technical/chunk-format.txt @@ -0,0 +1,116 @@ +Chunk-based file formats +======================== + +Some file formats in Git use a common concept of "chunks" to describe +sections of the file. This allows structured access to a large file by +scanning a small "table of contents" for the remaining data. This common +format is used by the `commit-graph` and `multi-pack-index` files. See +link:technical/pack-format.html[the `multi-pack-index` format] and +link:technical/commit-graph-format.html[the `commit-graph` format] for +how they use the chunks to describe structured data. + +A chunk-based file format begins with some header information custom to +that format. That header should include enough information to identify +the file type, format version, and number of chunks in the file. From this +information, that file can determine the start of the chunk-based region. + +The chunk-based region starts with a table of contents describing where +each chunk starts and ends. This consists of (C+1) rows of 12 bytes each, +where C is the number of chunks. Consider the following table: + + | Chunk ID (4 bytes) | Chunk Offset (8 bytes) | + |--------------------|------------------------| + | ID[0] | OFFSET[0] | + | ... | ... | + | ID[C] | OFFSET[C] | + | 0x0000 | OFFSET[C+1] | + +Each row consists of a 4-byte chunk identifier (ID) and an 8-byte offset. +Each integer is stored in network-byte order. + +The chunk identifier `ID[i]` is a label for the data stored within this +fill from `OFFSET[i]` (inclusive) to `OFFSET[i+1]` (exclusive). Thus, the +size of the `i`th chunk is equal to the difference between `OFFSET[i+1]` +and `OFFSET[i]`. This requires that the chunk data appears contiguously +in the same order as the table of contents. + +The final entry in the table of contents must be four zero bytes. This +confirms that the table of contents is ending and provides the offset for +the end of the chunk-based data. + +Note: The chunk-based format expects that the file contains _at least_ a +trailing hash after `OFFSET[C+1]`. + +Functions for working with chunk-based file formats are declared in +`chunk-format.h`. Using these methods provide extra checks that assist +developers when creating new file formats. + +Writing chunk-based file formats +-------------------------------- + +To write a chunk-based file format, create a `struct chunkfile` by +calling `init_chunkfile()` and pass a `struct hashfile` pointer. The +caller is responsible for opening the `hashfile` and writing header +information so the file format is identifiable before the chunk-based +format begins. + +Then, call `add_chunk()` for each chunk that is intended for write. This +populates the `chunkfile` with information about the order and size of +each chunk to write. Provide a `chunk_write_fn` function pointer to +perform the write of the chunk data upon request. + +Call `write_chunkfile()` to write the table of contents to the `hashfile` +followed by each of the chunks. This will verify that each chunk wrote +the expected amount of data so the table of contents is correct. + +Finally, call `free_chunkfile()` to clear the `struct chunkfile` data. The +caller is responsible for finalizing the `hashfile` by writing the trailing +hash and closing the file. + +Reading chunk-based file formats +-------------------------------- + +To read a chunk-based file format, the file must be opened as a +memory-mapped region. The chunk-format API expects that the entire file +is mapped as a contiguous memory region. + +Initialize a `struct chunkfile` pointer with `init_chunkfile(NULL)`. + +After reading the header information from the beginning of the file, +including the chunk count, call `read_table_of_contents()` to populate +the `struct chunkfile` with the list of chunks, their offsets, and their +sizes. + +Extract the data information for each chunk using `pair_chunk()` or +`read_chunk()`: + +* `pair_chunk()` assigns a given pointer with the location inside the + memory-mapped file corresponding to that chunk's offset. If the chunk + does not exist, then the pointer is not modified. + +* `read_chunk()` takes a `chunk_read_fn` function pointer and calls it + with the appropriate initial pointer and size information. The function + is not called if the chunk does not exist. Use this method to read chunks + if you need to perform immediate parsing or if you need to execute logic + based on the size of the chunk. + +After calling these methods, call `free_chunkfile()` to clear the +`struct chunkfile` data. This will not close the memory-mapped region. +Callers are expected to own that data for the timeframe the pointers into +the region are needed. + +Examples +-------- + +These file formats use the chunk-format API, and can be used as examples +for future formats: + +* *commit-graph:* see `write_commit_graph_file()` and `parse_commit_graph()` + in `commit-graph.c` for how the chunk-format API is used to write and + parse the commit-graph file format documented in + link:technical/commit-graph-format.html[the commit-graph file format]. + +* *multi-pack-index:* see `write_midx_internal()` and `load_multi_pack_index()` + in `midx.c` for how the chunk-format API is used to write and + parse the multi-pack-index file format documented in + link:technical/pack-format.html[the multi-pack-index file format]. diff --git a/Documentation/technical/commit-graph-format.txt b/Documentation/technical/commit-graph-format.txt index b3b58880b9..87971c27dd 100644 --- a/Documentation/technical/commit-graph-format.txt +++ b/Documentation/technical/commit-graph-format.txt @@ -4,11 +4,7 @@ Git commit graph format The Git commit graph stores a list of commit OIDs and some associated metadata, including: -- The generation number of the commit. Commits with no parents have - generation number 1; commits with parents have generation number - one more than the maximum generation number of its parents. We - reserve zero as special, and can be used to mark a generation - number invalid or as "not computed". +- The generation number of the commit. - The root tree OID. @@ -65,6 +61,9 @@ CHUNK LOOKUP: the length using the next chunk position if necessary.) Each chunk ID appears at most once. + The CHUNK LOOKUP matches the table of contents from + link:technical/chunk-format.html[the chunk-based file format]. + The remaining data in the body is described one chunk at a time, and these chunks may be given in any order. Chunks are required unless otherwise specified. @@ -86,13 +85,33 @@ CHUNK DATA: position. If there are more than two parents, the second value has its most-significant bit on and the other bits store an array position into the Extra Edge List chunk. - * The next 8 bytes store the generation number of the commit and + * The next 8 bytes store the topological level (generation number v1) + of the commit and the commit time in seconds since EPOCH. The generation number uses the higher 30 bits of the first 4 bytes, while the commit time uses the 32 bits of the second 4 bytes, along with the lowest 2 bits of the lowest byte, storing the 33rd and 34th bit of the commit time. + Generation Data (ID: {'G', 'D', 'A', 'T' }) (N * 4 bytes) [Optional] + * This list of 4-byte values store corrected commit date offsets for the + commits, arranged in the same order as commit data chunk. + * If the corrected commit date offset cannot be stored within 31 bits, + the value has its most-significant bit on and the other bits store + the position of corrected commit date into the Generation Data Overflow + chunk. + * Generation Data chunk is present only when commit-graph file is written + by compatible versions of Git and in case of split commit-graph chains, + the topmost layer also has Generation Data chunk. + + Generation Data Overflow (ID: {'G', 'D', 'O', 'V' }) [Optional] + * This list of 8-byte values stores the corrected commit date offsets + for commits with corrected commit date offsets that cannot be + stored within 31 bits. + * Generation Data Overflow chunk is present only when Generation Data + chunk is present and atleast one corrected commit date offset cannot + be stored within 31 bits. + Extra Edge List (ID: {'E', 'D', 'G', 'E'}) [Optional] This list of 4-byte values store the second through nth parents for all octopus merges. The second parent value in the commit data stores diff --git a/Documentation/technical/commit-graph.txt b/Documentation/technical/commit-graph.txt index f14a7659aa..f05e7bda1a 100644 --- a/Documentation/technical/commit-graph.txt +++ b/Documentation/technical/commit-graph.txt @@ -38,14 +38,31 @@ A consumer may load the following info for a commit from the graph: Values 1-4 satisfy the requirements of parse_commit_gently(). -Define the "generation number" of a commit recursively as follows: +There are two definitions of generation number: +1. Corrected committer dates (generation number v2) +2. Topological levels (generation nummber v1) - * A commit with no parents (a root commit) has generation number one. +Define "corrected committer date" of a commit recursively as follows: - * A commit with at least one parent has generation number one more than - the largest generation number among its parents. + * A commit with no parents (a root commit) has corrected committer date + equal to its committer date. -Equivalently, the generation number of a commit A is one more than the + * A commit with at least one parent has corrected committer date equal to + the maximum of its commiter date and one more than the largest corrected + committer date among its parents. + + * As a special case, a root commit with timestamp zero has corrected commit + date of 1, to be able to distinguish it from GENERATION_NUMBER_ZERO + (that is, an uncomputed corrected commit date). + +Define the "topological level" of a commit recursively as follows: + + * A commit with no parents (a root commit) has topological level of one. + + * A commit with at least one parent has topological level one more than + the largest topological level among its parents. + +Equivalently, the topological level of a commit A is one more than the length of a longest path from A to a root commit. The recursive definition is easier to use for computation and observing the following property: @@ -60,6 +77,9 @@ is easier to use for computation and observing the following property: generation numbers, then we always expand the boundary commit with highest generation number and can easily detect the stopping condition. +The property applies to both versions of generation number, that is both +corrected committer dates and topological levels. + This property can be used to significantly reduce the time it takes to walk commits and determine topological relationships. Without generation numbers, the general heuristic is the following: @@ -67,7 +87,9 @@ numbers, the general heuristic is the following: If A and B are commits with commit time X and Y, respectively, and X < Y, then A _probably_ cannot reach B. -This heuristic is currently used whenever the computation is allowed to +In absence of corrected commit dates (for example, old versions of Git or +mixed generation graph chains), +this heuristic is currently used whenever the computation is allowed to violate topological relationships due to clock skew (such as "git log" with default order), but is not used when the topological order is required (such as merge base calculations, "git log --graph"). @@ -77,7 +99,7 @@ in the commit graph. We can treat these commits as having "infinite" generation number and walk until reaching commits with known generation number. -We use the macro GENERATION_NUMBER_INFINITY = 0xFFFFFFFF to mark commits not +We use the macro GENERATION_NUMBER_INFINITY to mark commits not in the commit-graph file. If a commit-graph file was written by a version of Git that did not compute generation numbers, then those commits will have generation number represented by the macro GENERATION_NUMBER_ZERO = 0. @@ -93,12 +115,12 @@ fully-computed generation numbers. Using strict inequality may result in walking a few extra commits, but the simplicity in dealing with commits with generation number *_INFINITY or *_ZERO is valuable. -We use the macro GENERATION_NUMBER_MAX = 0x3FFFFFFF to for commits whose -generation numbers are computed to be at least this value. We limit at -this value since it is the largest value that can be stored in the -commit-graph file using the 30 bits available to generation numbers. This -presents another case where a commit can have generation number equal to -that of a parent. +We use the macro GENERATION_NUMBER_V1_MAX = 0x3FFFFFFF for commits whose +topological levels (generation number v1) are computed to be at least +this value. We limit at this value since it is the largest value that +can be stored in the commit-graph file using the 30 bits available +to topological levels. This presents another case where a commit can +have generation number equal to that of a parent. Design Details -------------- @@ -267,6 +289,35 @@ The merge strategy values (2 for the size multiple, 64,000 for the maximum number of commits) could be extracted into config settings for full flexibility. +## Handling Mixed Generation Number Chains + +With the introduction of generation number v2 and generation data chunk, the +following scenario is possible: + +1. "New" Git writes a commit-graph with the corrected commit dates. +2. "Old" Git writes a split commit-graph on top without corrected commit dates. + +A naive approach of using the newest available generation number from +each layer would lead to violated expectations: the lower layer would +use corrected commit dates which are much larger than the topological +levels of the higher layer. For this reason, Git inspects the topmost +layer to see if the layer is missing corrected commit dates. In such a case +Git only uses topological level for generation numbers. + +When writing a new layer in split commit-graph, we write corrected commit +dates if the topmost layer has corrected commit dates written. This +guarantees that if a layer has corrected commit dates, all lower layers +must have corrected commit dates as well. + +When merging layers, we do not consider whether the merged layers had corrected +commit dates. Instead, the new layer will have corrected commit dates if the +layer below the new layer has corrected commit dates. + +While writing or merging layers, if the new layer is the only layer, it will +have corrected commit dates when written by compatible versions of Git. Thus, +rewriting split commit-graph as a single file (`--split=replace`) creates a +single layer with corrected commit dates. + ## Deleting graph-{hash} files After a new tip file is written, some `graph-{hash}` files may no longer diff --git a/Documentation/technical/hash-function-transition.txt b/Documentation/technical/hash-function-transition.txt index 6fd20ebbc2..7c1630bf83 100644 --- a/Documentation/technical/hash-function-transition.txt +++ b/Documentation/technical/hash-function-transition.txt @@ -33,16 +33,9 @@ researchers. On 23 February 2017 the SHAttered attack Git v2.13.0 and later subsequently moved to a hardened SHA-1 implementation by default, which isn't vulnerable to the SHAttered -attack. +attack, but SHA-1 is still weak. -Thus Git has in effect already migrated to a new hash that isn't SHA-1 -and doesn't share its vulnerabilities, its new hash function just -happens to produce exactly the same output for all known inputs, -except two PDFs published by the SHAttered researchers, and the new -implementation (written by those researchers) claims to detect future -cryptanalytic collision attacks. - -Regardless, it's considered prudent to move past any variant of SHA-1 +Thus it's considered prudent to move past any variant of SHA-1 to a new hash. There's no guarantee that future attacks on SHA-1 won't be published in the future, and those attacks may not have viable mitigations. @@ -57,6 +50,38 @@ SHA-1 still possesses the other properties such as fast object lookup and safe error checking, but other hash functions are equally suitable that are believed to be cryptographically secure. +Choice of Hash +-------------- +The hash to replace the hardened SHA-1 should be stronger than SHA-1 +was: we would like it to be trustworthy and useful in practice for at +least 10 years. + +Some other relevant properties: + +1. A 256-bit hash (long enough to match common security practice; not + excessively long to hurt performance and disk usage). + +2. High quality implementations should be widely available (e.g., in + OpenSSL and Apple CommonCrypto). + +3. The hash function's properties should match Git's needs (e.g. Git + requires collision and 2nd preimage resistance and does not require + length extension resistance). + +4. As a tiebreaker, the hash should be fast to compute (fortunately + many contenders are faster than SHA-1). + +There were several contenders for a successor hash to SHA-1, including +SHA-256, SHA-512/256, SHA-256x16, K12, and BLAKE2bp-256. + +In late 2018 the project picked SHA-256 as its successor hash. + +See 0ed8d8da374 (doc hash-function-transition: pick SHA-256 as +NewHash, 2018-08-04) and numerous mailing list threads at the time, +particularly the one starting at +https://lore.kernel.org/git/20180609224913.GC38834@genre.crustytoothpaste.net/ +for more information. + Goals ----- 1. The transition to SHA-256 can be done one local repository at a time. @@ -94,7 +119,7 @@ Overview -------- We introduce a new repository format extension. Repositories with this extension enabled use SHA-256 instead of SHA-1 to name their objects. -This affects both object names and object content --- both the names +This affects both object names and object content -- both the names of objects and all references to other objects within an object are switched to the new hash function. @@ -107,7 +132,7 @@ mapping to allow naming objects using either their SHA-1 and SHA-256 names interchangeably. "git cat-file" and "git hash-object" gain options to display an object -in its sha1 form and write an object given its sha1 form. This +in its SHA-1 form and write an object given its SHA-1 form. This requires all objects referenced by that object to be present in the object database so that they can be named using the appropriate name (using the bidirectional hash mapping). @@ -115,7 +140,7 @@ object database so that they can be named using the appropriate name Fetches from a SHA-1 based server convert the fetched objects into SHA-256 form and record the mapping in the bidirectional mapping table (see below for details). Pushes to a SHA-1 based server convert the -objects being pushed into sha1 form so the server does not have to be +objects being pushed into SHA-1 form so the server does not have to be aware of the hash function the client is using. Detailed Design @@ -151,38 +176,38 @@ repository extensions. Object names ~~~~~~~~~~~~ -Objects can be named by their 40 hexadecimal digit sha1-name or 64 -hexadecimal digit sha256-name, plus names derived from those (see +Objects can be named by their 40 hexadecimal digit SHA-1 name or 64 +hexadecimal digit SHA-256 name, plus names derived from those (see gitrevisions(7)). -The sha1-name of an object is the SHA-1 of the concatenation of its -type, length, a nul byte, and the object's sha1-content. This is the +The SHA-1 name of an object is the SHA-1 of the concatenation of its +type, length, a nul byte, and the object's SHA-1 content. This is the traditional <sha1> used in Git to name objects. -The sha256-name of an object is the SHA-256 of the concatenation of its -type, length, a nul byte, and the object's sha256-content. +The SHA-256 name of an object is the SHA-256 of the concatenation of its +type, length, a nul byte, and the object's SHA-256 content. Object format ~~~~~~~~~~~~~ The content as a byte sequence of a tag, commit, or tree object named -by sha1 and sha256 differ because an object named by sha256-name refers to -other objects by their sha256-names and an object named by sha1-name -refers to other objects by their sha1-names. +by SHA-1 and SHA-256 differ because an object named by SHA-256 name refers to +other objects by their SHA-256 names and an object named by SHA-1 name +refers to other objects by their SHA-1 names. -The sha256-content of an object is the same as its sha1-content, except -that objects referenced by the object are named using their sha256-names -instead of sha1-names. Because a blob object does not refer to any -other object, its sha1-content and sha256-content are the same. +The SHA-256 content of an object is the same as its SHA-1 content, except +that objects referenced by the object are named using their SHA-256 names +instead of SHA-1 names. Because a blob object does not refer to any +other object, its SHA-1 content and SHA-256 content are the same. -The format allows round-trip conversion between sha256-content and -sha1-content. +The format allows round-trip conversion between SHA-256 content and +SHA-1 content. Object storage ~~~~~~~~~~~~~~ Loose objects use zlib compression and packed objects use the packed format described in Documentation/technical/pack-format.txt, just like -today. The content that is compressed and stored uses sha256-content -instead of sha1-content. +today. The content that is compressed and stored uses SHA-256 content +instead of SHA-1 content. Pack index ~~~~~~~~~~ @@ -191,21 +216,21 @@ hash functions. They have the following format (all integers are in network byte order): - A header appears at the beginning and consists of the following: - - The 4-byte pack index signature: '\377t0c' - - 4-byte version number: 3 - - 4-byte length of the header section, including the signature and + * The 4-byte pack index signature: '\377t0c' + * 4-byte version number: 3 + * 4-byte length of the header section, including the signature and version number - - 4-byte number of objects contained in the pack - - 4-byte number of object formats in this pack index: 2 - - For each object format: - - 4-byte format identifier (e.g., 'sha1' for SHA-1) - - 4-byte length in bytes of shortened object names. This is the + * 4-byte number of objects contained in the pack + * 4-byte number of object formats in this pack index: 2 + * For each object format: + ** 4-byte format identifier (e.g., 'sha1' for SHA-1) + ** 4-byte length in bytes of shortened object names. This is the shortest possible length needed to make names in the shortened object name table unambiguous. - - 4-byte integer, recording where tables relating to this format + ** 4-byte integer, recording where tables relating to this format are stored in this index file, as an offset from the beginning. - - 4-byte offset to the trailer from the beginning of this file. - - Zero or more additional key/value pairs (4-byte key, 4-byte + * 4-byte offset to the trailer from the beginning of this file. + * Zero or more additional key/value pairs (4-byte key, 4-byte value). Only one key is supported: 'PSRC'. See the "Loose objects and unreachable objects" section for supported values and how this is used. All other keys are reserved. Readers must ignore @@ -213,37 +238,36 @@ network byte order): - Zero or more NUL bytes. This can optionally be used to improve the alignment of the full object name table below. - Tables for the first object format: - - A sorted table of shortened object names. These are prefixes of + * A sorted table of shortened object names. These are prefixes of the names of all objects in this pack file, packed together without offset values to reduce the cache footprint of the binary search for a specific object name. - - A table of full object names in pack order. This allows resolving + * A table of full object names in pack order. This allows resolving a reference to "the nth object in the pack file" (from a reachability bitmap or from the next table of another object format) to its object name. - - A table of 4-byte values mapping object name order to pack order. + * A table of 4-byte values mapping object name order to pack order. For an object in the table of sorted shortened object names, the value at the corresponding index in this table is the index in the previous table for that same object. - This can be used to look up the object in reachability bitmaps or to look up its name in another object format. - - A table of 4-byte CRC32 values of the packed object data, in the + * A table of 4-byte CRC32 values of the packed object data, in the order that the objects appear in the pack file. This is to allow compressed data to be copied directly from pack to pack during repacking without undetected data corruption. - - A table of 4-byte offset values. For an object in the table of + * A table of 4-byte offset values. For an object in the table of sorted shortened object names, the value at the corresponding index in this table indicates where that object can be found in the pack file. These are usually 31-bit pack file offsets, but large offsets are encoded as an index into the next table with the most significant bit set. - - A table of 8-byte offset entries (empty for pack files less than + * A table of 8-byte offset entries (empty for pack files less than 2 GiB). Pack files are organized with heavily used objects toward the front, so most object references should not need to refer to this table. @@ -252,10 +276,10 @@ network byte order): up to and not including the table of CRC32 values. - Zero or more NUL bytes. - The trailer consists of the following: - - A copy of the 20-byte SHA-256 checksum at the end of the + * A copy of the 20-byte SHA-256 checksum at the end of the corresponding packfile. - - 20-byte SHA-256 checksum of all of the above. + * 20-byte SHA-256 checksum of all of the above. Loose object index ~~~~~~~~~~~~~~~~~~ @@ -288,18 +312,18 @@ To remove entries (e.g. in "git pack-refs" or "git-prune"): Translation table ~~~~~~~~~~~~~~~~~ -The index files support a bidirectional mapping between sha1-names -and sha256-names. The lookup proceeds similarly to ordinary object -lookups. For example, to convert a sha1-name to a sha256-name: +The index files support a bidirectional mapping between SHA-1 names +and SHA-256 names. The lookup proceeds similarly to ordinary object +lookups. For example, to convert a SHA-1 name to a SHA-256 name: 1. Look for the object in idx files. If a match is present in the - idx's sorted list of truncated sha1-names, then: - a. Read the corresponding entry in the sha1-name order to pack + idx's sorted list of truncated SHA-1 names, then: + a. Read the corresponding entry in the SHA-1 name order to pack name order mapping. - b. Read the corresponding entry in the full sha1-name table to + b. Read the corresponding entry in the full SHA-1 name table to verify we found the right object. If it is, then - c. Read the corresponding entry in the full sha256-name table. - That is the object's sha256-name. + c. Read the corresponding entry in the full SHA-256 name table. + That is the object's SHA-256 name. 2. Check for a loose object. Read lines from loose-object-idx until we find a match. @@ -313,10 +337,10 @@ Since all operations that make new objects (e.g., "git commit") add the new objects to the corresponding index, this mapping is possible for all objects in the object store. -Reading an object's sha1-content -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The sha1-content of an object can be read by converting all sha256-names -its sha256-content references to sha1-names using the translation table. +Reading an object's SHA-1 content +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The SHA-1 content of an object can be read by converting all SHA-256 names +of its SHA-256 content references to SHA-1 names using the translation table. Fetch ~~~~~ @@ -339,7 +363,7 @@ the following steps: 1. index-pack: inflate each object in the packfile and compute its SHA-1. Objects can contain deltas in OBJ_REF_DELTA format against objects the client has locally. These objects can be looked up - using the translation table and their sha1-content read as + using the translation table and their SHA-1 content read as described above to resolve the deltas. 2. topological sort: starting at the "want"s from the negotiation phase, walk through objects in the pack and emit a list of them, @@ -348,12 +372,12 @@ the following steps: (This list only contains objects reachable from the "wants". If the pack from the server contained additional extraneous objects, then they will be discarded.) -3. convert to sha256: open a new (sha256) packfile. Read the topologically +3. convert to SHA-256: open a new SHA-256 packfile. Read the topologically sorted list just generated. For each object, inflate its - sha1-content, convert to sha256-content, and write it to the sha256 - pack. Record the new sha1<->sha256 mapping entry for use in the idx. + SHA-1 content, convert to SHA-256 content, and write it to the SHA-256 + pack. Record the new SHA-1<-->SHA-256 mapping entry for use in the idx. 4. sort: reorder entries in the new pack to match the order of objects - in the pack the server generated and include blobs. Write a sha256 idx + in the pack the server generated and include blobs. Write a SHA-256 idx file 5. clean up: remove the SHA-1 based pack file, index, and topologically sorted list obtained from the server in steps 1 @@ -378,19 +402,20 @@ experimenting to get this to perform well. Push ~~~~ Push is simpler than fetch because the objects referenced by the -pushed objects are already in the translation table. The sha1-content +pushed objects are already in the translation table. The SHA-1 content of each object being pushed can be read as described in the "Reading -an object's sha1-content" section to generate the pack written by git +an object's SHA-1 content" section to generate the pack written by git send-pack. Signed Commits ~~~~~~~~~~~~~~ We add a new field "gpgsig-sha256" to the commit object format to allow signing commits without relying on SHA-1. It is similar to the -existing "gpgsig" field. Its signed payload is the sha256-content of the +existing "gpgsig" field. Its signed payload is the SHA-256 content of the commit object with any "gpgsig" and "gpgsig-sha256" fields removed. This means commits can be signed + 1. using SHA-1 only, as in existing signed commit objects 2. using both SHA-1 and SHA-256, by using both gpgsig-sha256 and gpgsig fields. @@ -404,10 +429,11 @@ Signed Tags ~~~~~~~~~~~ We add a new field "gpgsig-sha256" to the tag object format to allow signing tags without relying on SHA-1. Its signed payload is the -sha256-content of the tag with its gpgsig-sha256 field and "-----BEGIN PGP +SHA-256 content of the tag with its gpgsig-sha256 field and "-----BEGIN PGP SIGNATURE-----" delimited in-body signature removed. This means tags can be signed + 1. using SHA-1 only, as in existing signed tag objects 2. using both SHA-1 and SHA-256, by using gpgsig-sha256 and an in-body signature. @@ -415,11 +441,11 @@ This means tags can be signed Mergetag embedding ~~~~~~~~~~~~~~~~~~ -The mergetag field in the sha1-content of a commit contains the -sha1-content of a tag that was merged by that commit. +The mergetag field in the SHA-1 content of a commit contains the +SHA-1 content of a tag that was merged by that commit. -The mergetag field in the sha256-content of the same commit contains the -sha256-content of the same tag. +The mergetag field in the SHA-256 content of the same commit contains the +SHA-256 content of the same tag. Submodules ~~~~~~~~~~ @@ -494,7 +520,7 @@ Caveats ------- Invalid objects ~~~~~~~~~~~~~~~ -The conversion from sha1-content to sha256-content retains any +The conversion from SHA-1 content to SHA-256 content retains any brokenness in the original object (e.g., tree entry modes encoded with leading 0, tree objects whose paths are not sorted correctly, and commit objects without an author or committer). This is a deliberate @@ -513,15 +539,15 @@ allow lifting this restriction. Alternates ~~~~~~~~~~ -For the same reason, a sha256 repository cannot borrow objects from a -sha1 repository using objects/info/alternates or +For the same reason, a SHA-256 repository cannot borrow objects from a +SHA-1 repository using objects/info/alternates or $GIT_ALTERNATE_OBJECT_REPOSITORIES. git notes ~~~~~~~~~ -The "git notes" tool annotates objects using their sha1-name as key. +The "git notes" tool annotates objects using their SHA-1 name as key. This design does not describe a way to migrate notes trees to use -sha256-names. That migration is expected to happen separately (for +SHA-256 names. That migration is expected to happen separately (for example using a file at the root of the notes tree to describe which hash it uses). @@ -555,7 +581,7 @@ unclear: Git 2.12 -Does this mean Git v2.12.0 is the commit with sha1-name +Does this mean Git v2.12.0 is the commit with SHA-1 name e7e07d5a4fcc2a203d9873968ad3e6bd4d7419d7 or the commit with new-40-digit-hash-name e7e07d5a4fcc2a203d9873968ad3e6bd4d7419d7? @@ -598,44 +624,12 @@ The user can also explicitly specify which format to use for a particular revision specifier and for output, overriding the mode. For example: -git --output-format=sha1 log abac87a^{sha1}..f787cac^{sha256} - -Choice of Hash --------------- -In early 2005, around the time that Git was written, Xiaoyun Wang, -Yiqun Lisa Yin, and Hongbo Yu announced an attack finding SHA-1 -collisions in 2^69 operations. In August they published details. -Luckily, no practical demonstrations of a collision in full SHA-1 were -published until 10 years later, in 2017. - -Git v2.13.0 and later subsequently moved to a hardened SHA-1 -implementation by default that mitigates the SHAttered attack, but -SHA-1 is still believed to be weak. - -The hash to replace this hardened SHA-1 should be stronger than SHA-1 -was: we would like it to be trustworthy and useful in practice for at -least 10 years. - -Some other relevant properties: - -1. A 256-bit hash (long enough to match common security practice; not - excessively long to hurt performance and disk usage). - -2. High quality implementations should be widely available (e.g., in - OpenSSL and Apple CommonCrypto). - -3. The hash function's properties should match Git's needs (e.g. Git - requires collision and 2nd preimage resistance and does not require - length extension resistance). - -4. As a tiebreaker, the hash should be fast to compute (fortunately - many contenders are faster than SHA-1). - -We choose SHA-256. + git --output-format=sha1 log abac87a^{sha1}..f787cac^{sha256} Transition plan --------------- Some initial steps can be implemented independently of one another: + - adding a hash function API (vtable) - teaching fsck to tolerate the gpgsig-sha256 field - excluding gpgsig-* from the fields copied by "git commit --amend" @@ -647,9 +641,9 @@ Some initial steps can be implemented independently of one another: - introducing index v3 - adding support for the PSRC field and safer object pruning - The first user-visible change is the introduction of the objectFormat extension (without compatObjectFormat). This requires: + - teaching fsck about this mode of operation - using the hash function API (vtable) when computing object names - signing objects and verifying signatures @@ -657,6 +651,7 @@ extension (without compatObjectFormat). This requires: repository Next comes introduction of compatObjectFormat: + - implementing the loose-object-idx - translating object names between object formats - translating object content between object formats @@ -669,10 +664,11 @@ Next comes introduction of compatObjectFormat: "Object names on the command line" above) The next step is supporting fetches and pushes to SHA-1 repositories: + - allow pushes to a repository using the compat format - generate a topologically sorted list of the SHA-1 names of fetched objects -- convert the fetched packfile to sha256 format and generate an idx +- convert the fetched packfile to SHA-256 format and generate an idx file - re-sort to match the order of objects in the fetched packfile @@ -734,6 +730,7 @@ Using hash functions in parallel Objects newly created would be addressed by the new hash, but inside such an object (e.g. commit) it is still possible to address objects using the old hash function. + * You cannot trust its history (needed for bisectability) in the future without further work * Maintenance burden as the number of supported hash functions grows @@ -743,36 +740,38 @@ using the old hash function. Signed objects with multiple hashes ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Instead of introducing the gpgsig-sha256 field in commit and tag objects -for sha256-content based signatures, an earlier version of this design -added "hash sha256 <sha256-name>" fields to strengthen the existing -sha1-content based signatures. +for SHA-256 content based signatures, an earlier version of this design +added "hash sha256 <SHA-256 name>" fields to strengthen the existing +SHA-1 content based signatures. In other words, a single signature was used to attest to the object content using both hash functions. This had some advantages: + * Using one signature instead of two speeds up the signing process. * Having one signed payload with both hashes allows the signer to - attest to the sha1-name and sha256-name referring to the same object. + attest to the SHA-1 name and SHA-256 name referring to the same object. * All users consume the same signature. Broken signatures are likely to be detected quickly using current versions of git. However, it also came with disadvantages: -* Verifying a signed object requires access to the sha1-names of all + +* Verifying a signed object requires access to the SHA-1 names of all objects it references, even after the transition is complete and translation table is no longer needed for anything else. To support - this, the design added fields such as "hash sha1 tree <sha1-name>" - and "hash sha1 parent <sha1-name>" to the sha256-content of a signed + this, the design added fields such as "hash sha1 tree <SHA-1 name>" + and "hash sha1 parent <SHA-1 name>" to the SHA-256 content of a signed commit, complicating the conversion process. -* Allowing signed objects without a sha1 (for after the transition is +* Allowing signed objects without a SHA-1 (for after the transition is complete) complicated the design further, requiring a "nohash sha1" - field to suppress including "hash sha1" fields in the sha256-content + field to suppress including "hash sha1" fields in the SHA-256 content and signed payload. Lazily populated translation table ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Some of the work of building the translation table could be deferred to push time, but that would significantly complicate and slow down pushes. -Calculating the sha1-name at object creation time at the same time it is -being streamed to disk and having its sha256-name calculated should be +Calculating the SHA-1 name at object creation time at the same time it is +being streamed to disk and having its SHA-256 name calculated should be an acceptable cost. Document History @@ -782,18 +781,19 @@ Document History bmwill@google.com, jonathantanmy@google.com, jrnieder@gmail.com, sbeller@google.com -Initial version sent to -http://lore.kernel.org/git/20170304011251.GA26789@aiede.mtv.corp.google.com +* Initial version sent to https://lore.kernel.org/git/20170304011251.GA26789@aiede.mtv.corp.google.com 2017-03-03 jrnieder@gmail.com Incorporated suggestions from jonathantanmy and sbeller: -* describe purpose of signed objects with each hash type -* redefine signed object verification using object content under the + +* Describe purpose of signed objects with each hash type +* Redefine signed object verification using object content under the first hash function 2017-03-06 jrnieder@gmail.com + * Use SHA3-256 instead of SHA2 (thanks, Linus and brian m. carlson).[1][2] -* Make sha3-based signatures a separate field, avoiding the need for +* Make SHA3-based signatures a separate field, avoiding the need for "hash" and "nohash" fields (thanks to peff[3]). * Add a sorting phase to fetch (thanks to Junio for noticing the need for this). @@ -805,23 +805,26 @@ Incorporated suggestions from jonathantanmy and sbeller: especially Junio). 2017-09-27 jrnieder@gmail.com, sbeller@google.com -* use placeholder NewHash instead of SHA3-256 -* describe criteria for picking a hash function. -* include a transition plan (thanks especially to Brandon Williams + +* Use placeholder NewHash instead of SHA3-256 +* Describe criteria for picking a hash function. +* Include a transition plan (thanks especially to Brandon Williams for fleshing these ideas out) -* define the translation table (thanks, Shawn Pearce[5], Jonathan +* Define the translation table (thanks, Shawn Pearce[5], Jonathan Tan, and Masaya Suzuki) -* avoid loose object overhead by packing more aggressively in +* Avoid loose object overhead by packing more aggressively in "git gc --auto" Later history: - See the history of this file in git.git for the history of subsequent - edits. This document history is no longer being maintained as it - would now be superfluous to the commit log +* See the history of this file in git.git for the history of subsequent + edits. This document history is no longer being maintained as it + would now be superfluous to the commit log + +References: -[1] http://lore.kernel.org/git/CA+55aFzJtejiCjV0e43+9oR3QuJK2PiFiLQemytoLpyJWe6P9w@mail.gmail.com/ -[2] http://lore.kernel.org/git/CA+55aFz+gkAsDZ24zmePQuEs1XPS9BP_s8O7Q4wQ7LV7X5-oDA@mail.gmail.com/ -[3] http://lore.kernel.org/git/20170306084353.nrns455dvkdsfgo5@sigill.intra.peff.net/ -[4] http://lore.kernel.org/git/20170304224936.rqqtkdvfjgyezsht@genre.crustytoothpaste.net -[5] https://lore.kernel.org/git/CAJo=hJtoX9=AyLHHpUJS7fueV9ciZ_MNpnEPHUz8Whui6g9F0A@mail.gmail.com/ + [1] https://lore.kernel.org/git/CA+55aFzJtejiCjV0e43+9oR3QuJK2PiFiLQemytoLpyJWe6P9w@mail.gmail.com/ + [2] https://lore.kernel.org/git/CA+55aFz+gkAsDZ24zmePQuEs1XPS9BP_s8O7Q4wQ7LV7X5-oDA@mail.gmail.com/ + [3] https://lore.kernel.org/git/20170306084353.nrns455dvkdsfgo5@sigill.intra.peff.net/ + [4] https://lore.kernel.org/git/20170304224936.rqqtkdvfjgyezsht@genre.crustytoothpaste.net + [5] https://lore.kernel.org/git/CAJo=hJtoX9=AyLHHpUJS7fueV9ciZ_MNpnEPHUz8Whui6g9F0A@mail.gmail.com/ diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index 69edf46c03..d363a71c37 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -26,7 +26,7 @@ Git index format Extensions are identified by signature. Optional extensions can be ignored if Git does not understand them. - Git currently supports cached tree and resolve undo extensions. + Git currently supports cache tree and resolve undo extensions. 4-byte extension signature. If the first byte is 'A'..'Z' the extension is optional and can be ignored. @@ -136,14 +136,35 @@ Git index format == Extensions -=== Cached tree - - Cached tree extension contains pre-computed hashes for trees that can - be derived from the index. It helps speed up tree object generation - from index for a new commit. - - When a path is updated in index, the path must be invalidated and - removed from tree cache. +=== Cache tree + + Since the index does not record entries for directories, the cache + entries cannot describe tree objects that already exist in the object + database for regions of the index that are unchanged from an existing + commit. The cache tree extension stores a recursive tree structure that + describes the trees that already exist and completely match sections of + the cache entries. This speeds up tree object generation from the index + for a new commit by only computing the trees that are "new" to that + commit. It also assists when comparing the index to another tree, such + as `HEAD^{tree}`, since sections of the index can be skipped when a tree + comparison demonstrates equality. + + The recursive tree structure uses nodes that store a number of cache + entries, a list of subnodes, and an object ID (OID). The OID references + the existing tree for that node, if it is known to exist. The subnodes + correspond to subdirectories that themselves have cache tree nodes. The + number of cache entries corresponds to the number of cache entries in + the index that describe paths within that tree's directory. + + The extension tracks the full directory structure in the cache tree + extension, but this is generally smaller than the full cache entry list. + + When a path is updated in index, Git invalidates all nodes of the + recursive cache tree corresponding to the parent directories of that + path. We store these tree nodes as being "invalid" by using "-1" as the + number of cache entries. Invalid nodes still store a span of index + entries, allowing Git to focus its efforts when reconstructing a full + cache tree. The signature for this extension is { 'T', 'R', 'E', 'E' }. @@ -174,7 +195,8 @@ Git index format first entry represents the root level of the repository, followed by the first subtree--let's call this A--of the root level (with its name relative to the root level), followed by the first subtree of A (with - its name relative to A), ... + its name relative to A), and so on. The specified number of subtrees + indicates when the current level of the recursive stack is complete. === Resolve undo @@ -251,14 +273,14 @@ Git index format - Stat data of $GIT_DIR/info/exclude. See "Index entry" section from ctime field until "file size". - - Stat data of core.excludesfile + - Stat data of core.excludesFile - 32-bit dir_flags (see struct dir_struct) - Hash of $GIT_DIR/info/exclude. A null hash means the file does not exist. - - Hash of core.excludesfile. A null hash means the file does + - Hash of core.excludesFile. A null hash means the file does not exist. - NUL-terminated string of per-dir exclude file name. This usually diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index f96b2e605f..1faa949bf6 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -55,6 +55,18 @@ Valid object types are: Type 5 is reserved for future expansion. Type 0 is invalid. +=== Size encoding + +This document uses the following "size encoding" of non-negative +integers: From each byte, the seven least significant bits are +used to form the resulting integer. As long as the most significant +bit is 1, this process continues; the byte with MSB 0 provides the +last seven bits. The seven-bit chunks are concatenated. Later +values are more significant. + +This size encoding should not be confused with the "offset encoding", +which is also used in this document. + === Deltified representation Conceptually there are only four object types: commit, tree, tag and @@ -73,7 +85,10 @@ Ref-delta can also refer to an object outside the pack (i.e. the so-called "thin pack"). When stored on disk however, the pack should be self contained to avoid cyclic dependency. -The delta data is a sequence of instructions to reconstruct an object +The delta data starts with the size of the base object and the +size of the object to be reconstructed. These sizes are +encoded using the size encoding from above. The remainder of +the delta data is a sequence of instructions to reconstruct the object from the base object. If the base object is deltified, it must be converted to canonical form first. Each instruction appends more and more data to the target object until it's complete. There are two @@ -259,6 +274,26 @@ Pack file entry: <+ Index checksum of all of the above. +== pack-*.rev files have the format: + + - A 4-byte magic number '0x52494458' ('RIDX'). + + - A 4-byte version identifier (= 1). + + - A 4-byte hash function identifier (= 1 for SHA-1, 2 for SHA-256). + + - A table of index positions (one per packed object, num_objects in + total, each a 4-byte unsigned integer in network order), sorted by + their corresponding offsets in the packfile. + + - A trailer, containing a: + + checksum of the corresponding packfile, and + + a checksum of all of the above. + +All 4-byte numbers are in network order. + == multi-pack-index (MIDX) files have the following format: The multi-pack-index files refer to multiple pack-files and loose objects. @@ -301,6 +336,9 @@ CHUNK LOOKUP: (Chunks are provided in file-order, so you can infer the length using the next chunk position if necessary.) + The CHUNK LOOKUP matches the table of contents from + link:technical/chunk-format.html[the chunk-based file format]. + The remaining data in the body is described one chunk at a time, and these chunks may be given in any order. Chunks are required unless otherwise specified. diff --git a/Documentation/technical/packfile-uri.txt b/Documentation/technical/packfile-uri.txt index 318713abc3..f7eabc6c76 100644 --- a/Documentation/technical/packfile-uri.txt +++ b/Documentation/technical/packfile-uri.txt @@ -37,8 +37,11 @@ at least so that we can test the client. This is the implementation: a feature, marked experimental, that allows the server to be configured by one or more `uploadpack.blobPackfileUri=<sha1> <uri>` entries. Whenever the list of objects to be sent is assembled, all such -blobs are excluded, replaced with URIs. The client will download those URIs, -expecting them to each point to packfiles containing single blobs. +blobs are excluded, replaced with URIs. As noted in "Future work" below, the +server can evolve in the future to support excluding other objects (or other +implementations of servers could be made that support excluding other objects) +without needing a protocol change, so clients should not expect that packfiles +downloaded in this way only contain single blobs. Client design ------------- diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt index f772d90eaf..a7c806a73e 100644 --- a/Documentation/technical/protocol-v2.txt +++ b/Documentation/technical/protocol-v2.txt @@ -33,8 +33,8 @@ In protocol v2 these special packets will have the following semantics: * '0000' Flush Packet (flush-pkt) - indicates the end of a message * '0001' Delimiter Packet (delim-pkt) - separates sections of a message - * '0002' Message Packet (response-end-pkt) - indicates the end of a response - for stateless connections + * '0002' Response End Packet (response-end-pkt) - indicates the end of a + response for stateless connections Initial Client Request ---------------------- diff --git a/Documentation/technical/reftable.txt b/Documentation/technical/reftable.txt index 2951840e9c..3ef169af27 100644 --- a/Documentation/technical/reftable.txt +++ b/Documentation/technical/reftable.txt @@ -446,7 +446,7 @@ especially if readers will not use the object name to ref mapping. Object blocks use unique, abbreviated 2-32 object name keys, mapping to ref blocks containing references pointing to that object directly, or as the peeled value of an annotated tag. Like ref blocks, object blocks use -the file's standard block size. The abbrevation length is available in +the file's standard block size. The abbreviation length is available in the footer as `obj_id_len`. To save space in small files, object blocks may be omitted if the ref @@ -872,17 +872,11 @@ A repository must set its `$GIT_DIR/config` to configure reftable: Layout ^^^^^^ -A collection of reftable files are stored in the `$GIT_DIR/reftable/` -directory: - -.... -00000001-00000001.log -00000002-00000002.ref -00000003-00000003.ref -.... - -where reftable files are named by a unique name such as produced by the -function `${min_update_index}-${max_update_index}.ref`. +A collection of reftable files are stored in the `$GIT_DIR/reftable/` directory. +Their names should have a random element, such that each filename is globally +unique; this helps avoid spurious failures on Windows, where open files cannot +be removed or overwritten. It suggested to use +`${min_update_index}-${max_update_index}-${random}.ref` as a naming convention. Log-only files use the `.log` extension, while ref-only and mixed ref and log files use `.ref`. extension. @@ -893,9 +887,9 @@ current files, one per line, in order, from oldest (base) to newest .... $ cat .git/reftable/tables.list -00000001-00000001.log -00000002-00000002.ref -00000003-00000003.ref +00000001-00000001-RANDOM1.log +00000002-00000002-RANDOM2.ref +00000003-00000003-RANDOM3.ref .... Readers must read `$GIT_DIR/reftable/tables.list` to determine which @@ -940,7 +934,7 @@ new reftable and atomically appending it to the stack: 3. Select `update_index` to be most recent file's `max_update_index + 1`. 4. Prepare temp reftable `tmp_XXXXXX`, including log entries. -5. Rename `tmp_XXXXXX` to `${update_index}-${update_index}.ref`. +5. Rename `tmp_XXXXXX` to `${update_index}-${update_index}-${random}.ref`. 6. Copy `tables.list` to `tables.list.lock`, appending file from (5). 7. Rename `tables.list.lock` to `tables.list`. @@ -993,7 +987,7 @@ prevents other processes from trying to compact these files. should always be the case, assuming that other processes are adhering to the locking protocol. 7. Rename `${min_update_index}-${max_update_index}_XXXXXX` to -`${min_update_index}-${max_update_index}.ref`. +`${min_update_index}-${max_update_index}-${random}.ref`. 8. Write the new stack to `tables.list.lock`, replacing `B` and `C` with the file from (4). 9. Rename `tables.list.lock` to `tables.list`. @@ -1005,6 +999,22 @@ This strategy permits compactions to proceed independently of updates. Each reftable (compacted or not) is uniquely identified by its name, so open reftables can be cached by their name. +Windows +^^^^^^^ + +On windows, and other systems that do not allow deleting or renaming to open +files, compaction may succeed, but other readers may prevent obsolete tables +from being deleted. + +On these platforms, the following strategy can be followed: on closing a +reftable stack, reload `tables.list`, and delete any tables no longer mentioned +in `tables.list`. + +Irregular program exit may still leave about unused files. In this case, a +cleanup operation can read `tables.list`, note its modification timestamp, and +delete any unreferenced `*.ref` files that are older. + + Alternatives considered ~~~~~~~~~~~~~~~~~~~~~~~ |