diff options
Diffstat (limited to 'Documentation')
55 files changed, 984 insertions, 198 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index ed4e443a3c..390ceece52 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -91,8 +91,6 @@ For shell scripts specifically (not exhaustive): - No shell arrays. - - No strlen ${#parameter}. - - No pattern replacement ${parameter/pattern/string}. - We use Arithmetic Expansion $(( ... )). diff --git a/Documentation/Makefile b/Documentation/Makefile index 8fe829cc1b..15d9d04f31 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -30,6 +30,7 @@ MAN7_TXT += gitcredentials.txt MAN7_TXT += gitcvs-migration.txt MAN7_TXT += gitdiffcore.txt MAN7_TXT += giteveryday.txt +MAN7_TXT += gitfaq.txt MAN7_TXT += gitglossary.txt MAN7_TXT += gitnamespaces.txt MAN7_TXT += gitremote-helpers.txt @@ -149,32 +150,9 @@ endif -include ../config.mak.autogen -include ../config.mak -# -# For docbook-xsl ... -# -1.68.1, no extra settings are needed? -# 1.69.0, set ASCIIDOC_ROFF? -# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? -# 1.71.1, set ASCIIDOC_ROFF? -# 1.72.0, set DOCBOOK_XSL_172. -# 1.73.0-, no extra settings are needed -# - -ifdef DOCBOOK_XSL_172 -ASCIIDOC_EXTRA += -a git-asciidoc-no-roff -MANPAGE_XSL = manpage-1.72.xsl -else - ifndef ASCIIDOC_ROFF - # docbook-xsl after 1.72 needs the regular XSL, but will not - # pass-thru raw roff codes from asciidoc.conf, so turn them off. - ASCIIDOC_EXTRA += -a git-asciidoc-no-roff - endif -endif ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif -ifdef DOCBOOK_SUPPRESS_SP -XMLTO_EXTRA += -m manpage-suppress-sp.xsl -endif # Newer DocBook stylesheet emits warning cruft in the output when # this is not set, and if set it shows an absolute link. Older diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt index aa828dfdc4..c3f2d1a831 100644 --- a/Documentation/MyFirstObjectWalk.txt +++ b/Documentation/MyFirstObjectWalk.txt @@ -357,9 +357,6 @@ static void walken_commit_walk(struct rev_info *rev) ... while ((commit = get_revision(rev))) { - if (!commit) - continue; - strbuf_reset(&prettybuf); pp_commit_easy(CMIT_FMT_ONELINE, commit, &prettybuf); puts(prettybuf.buf); diff --git a/Documentation/RelNotes/2.17.4.txt b/Documentation/RelNotes/2.17.4.txt new file mode 100644 index 0000000000..7d794ca01a --- /dev/null +++ b/Documentation/RelNotes/2.17.4.txt @@ -0,0 +1,16 @@ +Git v2.17.4 Release Notes +========================= + +This release is to address the security issue: CVE-2020-5260 + +Fixes since v2.17.3 +------------------- + + * With a crafted URL that contains a newline in it, the credential + helper machinery can be fooled to give credential information for + a wrong host. The attack has been made impossible by forbidding + a newline character in any value passed via the credential + protocol. + +Credit for finding the vulnerability goes to Felix Wilhelm of Google +Project Zero. diff --git a/Documentation/RelNotes/2.17.5.txt b/Documentation/RelNotes/2.17.5.txt new file mode 100644 index 0000000000..2abb821a73 --- /dev/null +++ b/Documentation/RelNotes/2.17.5.txt @@ -0,0 +1,22 @@ +Git v2.17.5 Release Notes +========================= + +This release is to address a security issue: CVE-2020-11008 + +Fixes since v2.17.4 +------------------- + + * With a crafted URL that contains a newline or empty host, or lacks + a scheme, the credential helper machinery can be fooled into + providing credential information that is not appropriate for the + protocol in use and host being contacted. + + Unlike the vulnerability CVE-2020-5260 fixed in v2.17.4, the + credentials are not for a host of the attacker's choosing; instead, + they are for some unspecified host (based on how the configured + credential helper handles an absent "host" parameter). + + The attack has been made impossible by refusing to work with + under-specified credential patterns. + +Credit for finding the vulnerability goes to Carlo Arenas. diff --git a/Documentation/RelNotes/2.18.3.txt b/Documentation/RelNotes/2.18.3.txt new file mode 100644 index 0000000000..25143f0cec --- /dev/null +++ b/Documentation/RelNotes/2.18.3.txt @@ -0,0 +1,5 @@ +Git v2.18.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.18.4.txt b/Documentation/RelNotes/2.18.4.txt new file mode 100644 index 0000000000..e8ef858a00 --- /dev/null +++ b/Documentation/RelNotes/2.18.4.txt @@ -0,0 +1,5 @@ +Git v2.18.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.19.4.txt b/Documentation/RelNotes/2.19.4.txt new file mode 100644 index 0000000000..35d0ae561b --- /dev/null +++ b/Documentation/RelNotes/2.19.4.txt @@ -0,0 +1,5 @@ +Git v2.19.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.19.5.txt b/Documentation/RelNotes/2.19.5.txt new file mode 100644 index 0000000000..18a4dcbfd6 --- /dev/null +++ b/Documentation/RelNotes/2.19.5.txt @@ -0,0 +1,5 @@ +Git v2.19.5 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.20.3.txt b/Documentation/RelNotes/2.20.3.txt new file mode 100644 index 0000000000..f6eccd103b --- /dev/null +++ b/Documentation/RelNotes/2.20.3.txt @@ -0,0 +1,5 @@ +Git v2.20.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.20.4.txt b/Documentation/RelNotes/2.20.4.txt new file mode 100644 index 0000000000..5a9e24e470 --- /dev/null +++ b/Documentation/RelNotes/2.20.4.txt @@ -0,0 +1,5 @@ +Git v2.20.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.21.2.txt b/Documentation/RelNotes/2.21.2.txt new file mode 100644 index 0000000000..a0fb83bb53 --- /dev/null +++ b/Documentation/RelNotes/2.21.2.txt @@ -0,0 +1,5 @@ +Git v2.21.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.21.3.txt b/Documentation/RelNotes/2.21.3.txt new file mode 100644 index 0000000000..2ca0aa5c62 --- /dev/null +++ b/Documentation/RelNotes/2.21.3.txt @@ -0,0 +1,5 @@ +Git v2.21.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.22.3.txt b/Documentation/RelNotes/2.22.3.txt new file mode 100644 index 0000000000..57296f6d17 --- /dev/null +++ b/Documentation/RelNotes/2.22.3.txt @@ -0,0 +1,5 @@ +Git v2.22.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.22.4.txt b/Documentation/RelNotes/2.22.4.txt new file mode 100644 index 0000000000..8b5f3e3f37 --- /dev/null +++ b/Documentation/RelNotes/2.22.4.txt @@ -0,0 +1,5 @@ +Git v2.22.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.23.2.txt b/Documentation/RelNotes/2.23.2.txt new file mode 100644 index 0000000000..b697cbe0e3 --- /dev/null +++ b/Documentation/RelNotes/2.23.2.txt @@ -0,0 +1,5 @@ +Git v2.23.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.23.3.txt b/Documentation/RelNotes/2.23.3.txt new file mode 100644 index 0000000000..2e35490137 --- /dev/null +++ b/Documentation/RelNotes/2.23.3.txt @@ -0,0 +1,5 @@ +Git v2.23.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.24.2.txt b/Documentation/RelNotes/2.24.2.txt new file mode 100644 index 0000000000..0049f65503 --- /dev/null +++ b/Documentation/RelNotes/2.24.2.txt @@ -0,0 +1,5 @@ +Git v2.24.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.24.3.txt b/Documentation/RelNotes/2.24.3.txt new file mode 100644 index 0000000000..5302e0f73b --- /dev/null +++ b/Documentation/RelNotes/2.24.3.txt @@ -0,0 +1,5 @@ +Git v2.24.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.25.3.txt b/Documentation/RelNotes/2.25.3.txt new file mode 100644 index 0000000000..15f7f21f10 --- /dev/null +++ b/Documentation/RelNotes/2.25.3.txt @@ -0,0 +1,5 @@ +Git v2.25.3 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.25.4.txt b/Documentation/RelNotes/2.25.4.txt new file mode 100644 index 0000000000..0dbb5daeec --- /dev/null +++ b/Documentation/RelNotes/2.25.4.txt @@ -0,0 +1,5 @@ +Git v2.25.4 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.26.1.txt b/Documentation/RelNotes/2.26.1.txt new file mode 100644 index 0000000000..1b4ecb3fdc --- /dev/null +++ b/Documentation/RelNotes/2.26.1.txt @@ -0,0 +1,5 @@ +Git v2.26.1 Release Notes +========================= + +This release merges the security fix that appears in v2.17.4; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.26.2.txt b/Documentation/RelNotes/2.26.2.txt new file mode 100644 index 0000000000..d434d0c695 --- /dev/null +++ b/Documentation/RelNotes/2.26.2.txt @@ -0,0 +1,5 @@ +Git v2.26.2 Release Notes +========================= + +This release merges the security fix that appears in v2.17.5; see +the release notes for that version for details. diff --git a/Documentation/RelNotes/2.27.0.txt b/Documentation/RelNotes/2.27.0.txt index 7a5c7fff80..0bd2dc713d 100644 --- a/Documentation/RelNotes/2.27.0.txt +++ b/Documentation/RelNotes/2.27.0.txt @@ -47,6 +47,35 @@ UI, Workflows & Features exists, and neither --[no-]rebase nor --ff-only is given (which would result a merge). + * "git p4" learned four new hooks and also "--no-verify" option to + bypass them (and the existing "p4-pre-submit" hook). + + * "git pull" shares many options with underlying "git fetch", but + some of them were not documented and some of those that would make + sense to pass down were not passed down. + + * "git rebase" learned the "--no-gpg-sign" option to countermand + commit.gpgSign the user may have. + + * The output from "git format-patch" uses RFC 2047 encoding for + non-ASCII letters on From: and Subject: headers, so that it can + directly be fed to e-mail programs. A new option has been added + to produce these headers in raw. + + * "git log" learned "--show-pulls" that helps pathspec limited + history views; a merge commit that takes the whole change from a + side branch, which is normally omitted from the output, is shown + in addition to the commits that introduce real changes. + + * The interactive input from various codepaths are consolidated and + any prompt possibly issued earlier are fflush()ed before we read. + + * Allow "git rebase" to reapply all local commits, even if the may be + already in the upstream, without checking first. + + * The 'pack.useSparse' configuration variable now defaults to 'true', + enabling an optimization that has been experimental since Git 2.21. + Performance, Internal Implementation, Development Support etc. @@ -60,6 +89,19 @@ Performance, Internal Implementation, Development Support etc. * "git stash" has kept an escape hatch to use the scripted version for a few releases, which got stale. It has been removed. + * Enable tests that require GnuPG on Windows. + + * Minor test usability improvement. + + * Trace2 enhancement to allow logging of the environment variables. + + * Test clean-up continues. + + * Perf-test update. + + * A Windows-specific test element has been made more robust against + misuse from both user's environment and programmer's errors. + Fixes since v2.26 ----------------- @@ -85,6 +127,74 @@ Fixes since v2.26 was rewritten in C back in 2.20 era, which has been corrected. (merge f08132f889 at/rebase-fork-point-regression-fix later to maint). + * The import-tars importer (in contrib/fast-import/) used to create + phony files at the top-level of the repository when the archive + contains global PAX headers, which made its own logic to detect and + omit the common leading directory ineffective, which has been + corrected. + (merge c839fcff65 js/import-tars-do-not-make-phony-files-from-pax-headers later to maint). + + * Simplify the commit ancestry connectedness check in a partial clone + repository in which "promised" objects are assumed to be obtainable + lazily on-demand from promisor remote repositories. + (merge 2b98478c6f jt/connectivity-check-optim-in-partial-clone later to maint). + + * The server-end of the v2 protocol to serve "git clone" and "git + fetch" was not prepared to see a delim packets at unexpected + places, which led to a crash. + (merge cacae4329f jk/harden-protocol-v2-delim-handling later to maint). + + * When fed a midx that records no objects, some codepaths tried to + loop from 0 through (num_objects-1), which, due to integer + arithmetic wrapping around, made it nonsense operation with out of + bounds array accesses. The code has been corrected to reject such + an midx file. + (merge 796d61cdc0 dr/midx-avoid-int-underflow later to maint). + + * Utitiles run via the run_command() API were not spawned correctly + on Cygwin, when the paths to them are given as a full path with + backslashes. + (merge 05ac8582bc ak/run-command-on-cygwin-fix later to maint). + + * "git pull --rebase" tried to run a rebase even after noticing that + the pull results in a fast-forward and no rebase is needed nor + sensible, for the past few years due to a mistake nobody noticed. + (merge fbae70ddc6 en/pull-do-not-rebase-after-fast-forwarding later to maint). + + * "git rebase" with the merge backend did not work well when the + rebase.abbreviateCommands configuration was set. + (merge de9f1d3ef4 ag/rebase-merge-allow-ff-under-abbrev-command later to maint). + + * The logic to auto-follow tags by "git clone --single-branch" was + not careful to avoid lazy-fetching unnecessary tags, which has been + corrected. + (merge 167a575e2d jk/use-quick-lookup-in-clone-for-tag-following later to maint). + + * "git rebase -i" did not leave the reflog entries correctly. + (merge 1f6965f994 en/sequencer-reflog-action later to maint). + + * The more aggressive updates to remote-tracking branches we had for + the past 7 years or so were not reflected in the documentation, + which has been corrected. + (merge a44088435c pb/pull-fetch-doc later to maint). + + * We've left the command line parsing of "git log :/a/b/" broken for + about a full year without anybody noticing, which has been + corrected. + (merge 0220461071 jc/missing-ref-store-fix later to maint). + + * Misc fixes for Windows. + (merge 3efc128cd5 js/mingw-fixes later to maint). + + * "git rebase" (again) learns to honor "--no-keep-empty", which lets + the user to discard commits that are empty from the beginning (as + opposed to the ones that become empty because of rebasing). The + interactive rebase also marks commits that are empty in the todo. + (merge 50ed76148a en/rebase-no-keep-empty later to maint). + + * Parsing the host part out of URL for the credential helper has been corrected. + (merge 4c5971e18a jk/credential-parsing-end-of-host-in-URL later to maint). + * Other code cleanup, docfix, build fix, etc. (merge 564956f358 jc/maintain-doc later to maint). (merge 7422b2a0a1 sg/commit-slab-clarify-peek later to maint). @@ -92,3 +202,16 @@ Fixes since v2.26 (merge 757c2ba3e2 en/oidset-uninclude-hashmap later to maint). (merge 8312aa7d74 jc/config-tar later to maint). (merge d00a5bdd50 ss/submodule-foreach-cb later to maint). + (merge 64d1022e14 ar/test-style-fixes later to maint). + (merge 4a465443a6 ds/doc-clone-filter later to maint). + (merge bb2dbe301b jk/t3419-drop-expensive-tests later to maint). + (merge d3507cc712 js/test-junit-finalization-fix later to maint). + (merge 2149b6748f bc/faq later to maint). + (merge 12dc0879f1 jk/test-cleanup later to maint). + (merge 344420bf0f pb/rebase-doc-typofix later to maint). + (merge 7cd54d37dc dl/wrapper-fix-indentation later to maint). + (merge 78725ebda9 jc/allow-strlen-substitution-in-shell-scripts later to maint). + (merge 2ecfcdecc6 jm/gitweb-fastcgi-utf8 later to maint). + (merge 0740d0a5d3 jk/oid-array-cleanups later to maint). + (merge a1aba0c95c js/t0007-typofix later to maint). + (merge 76ba7fa225 ma/config-doc-fix later to maint). diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index 8fc4b67081..3e4c13971b 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -31,24 +31,6 @@ ifdef::backend-docbook[] endif::backend-docbook[] ifdef::backend-docbook[] -ifndef::git-asciidoc-no-roff[] -# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. -# v1.72 breaks with this because it replaces dots not in roff requests. -[listingblock] -<example><title>{title}</title> -<literallayout class="monospaced"> -ifdef::doctype-manpage[] - .ft C -endif::doctype-manpage[] -| -ifdef::doctype-manpage[] - .ft -endif::doctype-manpage[] -</literallayout> -{title#}</example> -endif::git-asciidoc-no-roff[] - -ifdef::git-asciidoc-no-roff[] ifdef::doctype-manpage[] # The following two small workarounds insert a simple paragraph after screen [listingblock] @@ -67,7 +49,6 @@ ifdef::doctype-manpage[] {title#}</para></formalpara> {title%}<simpara></simpara> endif::doctype-manpage[] -endif::git-asciidoc-no-roff[] endif::backend-docbook[] ifdef::doctype-manpage[] diff --git a/Documentation/config.txt b/Documentation/config.txt index 2450589a0e..74009d5402 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -220,12 +220,12 @@ Example ; affected by the condition [includeIf "gitdir:/path/to/group/"] path = foo.inc ----- - ; include only if we are in a worktree where foo-branch is - ; currently checked out - [includeIf "onbranch:foo-branch"] - path = foo.inc +; include only if we are in a worktree where foo-branch is +; currently checked out +[includeIf "onbranch:foo-branch"] + path = foo.inc +---- Values ~~~~~~ diff --git a/Documentation/config/feature.txt b/Documentation/config/feature.txt index 875f8c8a66..4e3a5c0ceb 100644 --- a/Documentation/config/feature.txt +++ b/Documentation/config/feature.txt @@ -12,9 +12,6 @@ feature.experimental:: setting if you are interested in providing feedback on experimental features. The new default values are: + -* `pack.useSparse=true` uses a new algorithm when constructing a pack-file -which can improve `git push` performance in repos with many files. -+ * `fetch.negotiationAlgorithm=skipping` may improve fetch negotiation times by skipping more commits at a time, reducing the number of round trips. + diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index 45c7bd5a8f..564e8091ba 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -57,6 +57,11 @@ format.suffix:: `.patch`. Use this variable to change that suffix (make sure to include the dot if you want it). +format.encodeEmailHeaders:: + Encode email headers that have non-ASCII characters with + "Q-encoding" (described in RFC 2047) for email transmission. + Defaults to true. + format.pretty:: The default pretty format for log/show/whatchanged command, See linkgit:git-log[1], linkgit:git-show[1], diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 0dac580581..837f1b1679 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -119,8 +119,8 @@ pack.useSparse:: objects. This can have significant performance benefits when computing a pack to send a small change. However, it is possible that extra objects are added to the pack-file if the included - commits contain certain types of direct renames. Default is `false` - unless `feature.experimental` is enabled. + commits contain certain types of direct renames. Default is + `true`. pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. diff --git a/Documentation/config/trace2.txt b/Documentation/config/trace2.txt index 4ce0b9a6d1..01d3afd8a8 100644 --- a/Documentation/config/trace2.txt +++ b/Documentation/config/trace2.txt @@ -48,6 +48,15 @@ trace2.configParams:: May be overridden by the `GIT_TRACE2_CONFIG_PARAMS` environment variable. Unset by default. +trace2.envVars:: + A comma-separated list of "important" environment variables that should + be recorded in the trace2 output. For example, + `GIT_HTTP_USER_AGENT,GIT_CONFIG` would cause the trace2 output to + contain events listing the overrides for HTTP user agent and the + location of the Git configuration file (assuming any are set). May be + overriden by the `GIT_TRACE2_ENV_VARS` environment variable. Unset by + default. + trace2.destinationDebug:: Boolean. When true Git will print error messages when a trace target destination cannot be opened for writing. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 833f935cd0..6e2a160a47 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -205,7 +205,6 @@ ifndef::git-pull[] recursion (such as settings in linkgit:gitmodules[5] and linkgit:git-config[1]) override this option, as does specifying --[no-]recurse-submodules directly. -endif::git-pull[] -u:: --update-head-ok:: @@ -215,6 +214,7 @@ endif::git-pull[] to communicate with 'git fetch', and unless you are implementing your own Porcelain you are not supposed to use it. +endif::git-pull[] --upload-pack <upload-pack>:: When given, and the repository to fetch from is handled diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index ab5754e05d..38c0852139 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -148,9 +148,12 @@ default. You can use `--no-utf8` to override this. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. --continue:: -r:: diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 83ce51aedf..75feeef08a 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -109,9 +109,12 @@ effect to your index in a row. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. --ff:: If the current HEAD is the same as the parent of the diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index bf24f1813a..08d6045c4a 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -15,7 +15,8 @@ SYNOPSIS [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] [--no-tags] [--recurse-submodules[=<pathspec>]] [--[no-]shallow-submodules] - [--[no-]remote-submodules] [--jobs <n>] [--sparse] [--] <repository> + [--[no-]remote-submodules] [--jobs <n>] [--sparse] + [--filter=<filter>] [--] <repository> [<directory>] DESCRIPTION @@ -162,6 +163,16 @@ objects from the source repository into a pack in the cloned repository. of the repository. The sparse-checkout file can be modified to grow the working directory as needed. +--filter=<filter-spec>:: + Use the partial clone feature and request that the server sends + a subset of reachable objects according to a given object filter. + When using `--filter`, the supplied `<filter-spec>` is used for + the partial clone filter. For example, `--filter=blob:none` will + filter out all blobs (file contents) until needed by Git. Also, + `--filter=blob:limit=<size>` will filter out all blobs of size + at least `<size>`. For more details on filter specifications, see + the `--filter` option in linkgit:git-rev-list[1]. + --mirror:: Set up a mirror of the source repository. This implies `--bare`. Compared to `--bare`, `--mirror` not only maps local branches of the diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index ec15ee8d6f..2e2c581098 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -61,13 +61,11 @@ OPTIONS -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. - ---no-gpg-sign:: - Do not GPG-sign commit, to countermand a `--gpg-sign` option - given earlier on the command line. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand a `--gpg-sign` option given earlier on the command line. Commit Information ------------------ diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 13f653989f..a3baea32ae 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -348,13 +348,12 @@ changes to tracked files. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. - ---no-gpg-sign:: - Countermand `commit.gpgSign` configuration variable that is - set to force each and every commit to be signed. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. \--:: Do not interpret any more arguments as options. diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 0d4f8951bb..0f81d0437b 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -24,6 +24,7 @@ SYNOPSIS [(--reroll-count|-v) <n>] [--to=<email>] [--cc=<email>] [--[no-]cover-letter] [--quiet] + [--[no-]encode-email-headers] [--no-notes | --notes[=<ref>]] [--interdiff=<previous>] [--range-diff=<previous> [--creation-factor=<percent>]] @@ -253,6 +254,13 @@ feeding the result to `git send-email`. containing the branch description, shortlog and the overall diffstat. You can fill in a description in the file before sending it out. +--encode-email-headers:: +--no-encode-email-headers:: + Encode email headers that have non-ASCII characters with + "Q-encoding" (described in RFC 2047), instead of outputting the + headers verbatim. Defaults to the value of the + `format.encodeEmailHeaders` configuration variable. + --interdiff=<previous>:: As a reviewer aid, insert an interdiff into the cover letter, or as commentary of the lone patch of a 1-patch series, showing diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index bed09bb09e..619577f23b 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -49,6 +49,7 @@ OPTIONS Print out the ref name given on the command line by which each commit was reached. +--[no-]mailmap:: --[no-]use-mailmap:: Use mailmap file to map author and committer names and email addresses to canonical real names and email addresses. See diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index 3494a1db3e..dab9609013 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -374,14 +374,55 @@ These options can be used to modify 'git p4 submit' behavior. been submitted. Implies --disable-rebase. Can also be set with git-p4.disableP4Sync. Sync with origin/master still goes ahead if possible. -Hook for submit -~~~~~~~~~~~~~~~ +Hooks for submit +---------------- + +p4-pre-submit +~~~~~~~~~~~~~ + The `p4-pre-submit` hook is executed if it exists and is executable. The hook takes no parameters and nothing from standard input. Exiting with non-zero status from this script prevents `git-p4 submit` from launching. +It can be bypassed with the `--no-verify` command line option. One usage scenario is to run unit tests in the hook. +p4-prepare-changelist +~~~~~~~~~~~~~~~~~~~~~ + +The `p4-prepare-changelist` hook is executed right after preparing +the default changelist message and before the editor is started. +It takes one parameter, the name of the file that contains the +changelist text. Exiting with a non-zero status from the script +will abort the process. + +The purpose of the hook is to edit the message file in place, +and it is not supressed by the `--no-verify` option. This hook +is called even if `--prepare-p4-only` is set. + +p4-changelist +~~~~~~~~~~~~~ + +The `p4-changelist` hook is executed after the changelist +message has been edited by the user. It can be bypassed with the +`--no-verify` option. It takes a single parameter, the name +of the file that holds the proposed changelist text. Exiting +with a non-zero status causes the command to abort. + +The hook is allowed to edit the changelist file and can be used +to normalize the text into some project standard format. It can +also be used to refuse the Submit after inspect the message file. + +p4-post-changelist +~~~~~~~~~~~~~~~~~~ + +The `p4-post-changelist` hook is invoked after the submit has +successfully occured in P4. It takes no parameters and is meant +primarily for notification and cannot affect the outcome of the +git p4 submit action. + + + Rebase options ~~~~~~~~~~~~~~ These options can be used to modify 'git p4 rebase' behavior. diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index fecdf2600c..eaa2f2a404 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -14,7 +14,7 @@ SYNOPSIS [--local] [--incremental] [--window=<n>] [--depth=<n>] [--revs [--unpacked | --all]] [--keep-pack=<pack-name>] [--stdout [--filter=<filter-spec>] | base-name] - [--shallow] [--keep-true-parents] [--sparse] < object-list + [--shallow] [--keep-true-parents] [--[no-]sparse] < object-list DESCRIPTION @@ -196,14 +196,16 @@ depth is 4095. Add --no-reuse-object if you want to force a uniform compression level on all data no matter the source. ---sparse:: - Use the "sparse" algorithm to determine which objects to include in +--[no-]sparse:: + Toggle the "sparse" algorithm to determine which objects to include in the pack, when combined with the "--revs" option. This algorithm only walks trees that appear in paths that introduce new objects. This can have significant performance benefits when computing a pack to send a small change. However, it is possible that extra objects are added to the pack-file if the included commits contain - certain types of direct renames. + certain types of direct renames. If this option is not included, + it defaults to the value of `pack.useSparse`, which is true unless + otherwise specified. --thin:: Create a "thin" pack by omitting the common objects between a diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index b336df00c7..9c7ab2d48f 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -230,9 +230,9 @@ branch.<name>.merge options; see linkgit:git-config[1] for details. $ git pull origin next ------------------------------------------------ + -This leaves a copy of `next` temporarily in FETCH_HEAD, but -does not update any remote-tracking branches. Using remote-tracking -branches, the same can be done by invoking fetch and merge: +This leaves a copy of `next` temporarily in FETCH_HEAD, and +updates the remote-tracking branch `origin/next`. +The same can be done by invoking fetch and merge: + ------------------------------------------------ $ git fetch origin diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index f7a6033607..2de8620683 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -277,20 +277,51 @@ See also INCOMPATIBLE OPTIONS below. Other options, like --exec, will use the default of drop unless -i/--interactive is explicitly specified. + -Note that commits which start empty are kept, and commits which are -clean cherry-picks (as determined by `git log --cherry-mark ...`) are -always dropped. +Note that commits which start empty are kept (unless --no-keep-empty +is specified), and commits which are clean cherry-picks (as determined +by `git log --cherry-mark ...`) are detected and dropped as a +preliminary step (unless --reapply-cherry-picks is passed). + See also INCOMPATIBLE OPTIONS below. +--no-keep-empty:: --keep-empty:: - No-op. Rebasing commits that started empty (had no change - relative to their parent) used to fail and this option would - override that behavior, allowing commits with empty changes to - be rebased. Now commits with no changes do not cause rebasing - to halt. + Do not keep commits that start empty before the rebase + (i.e. that do not change anything from its parent) in the + result. The default is to keep commits which start empty, + since creating such commits requires passing the --allow-empty + override flag to `git commit`, signifying that a user is very + intentionally creating such a commit and thus wants to keep + it. + -See also BEHAVIORAL DIFFERENCES and INCOMPATIBLE OPTIONS below. +Usage of this flag will probably be rare, since you can get rid of +commits that start empty by just firing up an interactive rebase and +removing the lines corresponding to the commits you don't want. This +flag exists as a convenient shortcut, such as for cases where external +tools generate many empty commits and you want them all removed. ++ +For commits which do not start empty but become empty after rebasing, +see the --empty flag. ++ +See also INCOMPATIBLE OPTIONS below. + +--reapply-cherry-picks:: +--no-reapply-cherry-picks:: + Reapply all clean cherry-picks of any upstream commit instead + of preemptively dropping them. (If these commits then become + empty after rebasing, because they contain a subset of already + upstream changes, the behavior towards them is controlled by + the `--empty` flag.) ++ +By default (or if `--no-reapply-cherry-picks` is given), these commits +will be automatically dropped. Because this necessitates reading all +upstream commits, this can be expensive in repos with a large number +of upstream commits that need to be read. ++ +`--reapply-cherry-picks` allows rebase to forgo reading all upstream +commits, potentially improving performance. ++ +See also INCOMPATIBLE OPTIONS below. --allow-empty-message:: No-op. Rebasing commits with an empty message used to fail @@ -354,9 +385,12 @@ See also INCOMPATIBLE OPTIONS below. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. -q:: --quiet:: @@ -587,8 +621,9 @@ are incompatible with the following options: * --preserve-merges * --interactive * --exec - * --keep-empty + * --no-keep-empty * --empty= + * --reapply-cherry-picks * --edit-todo * --root when used in combination with --onto @@ -605,7 +640,7 @@ BEHAVIORAL DIFFERENCES ----------------------- git rebase has two primary backends: apply and merge. (The apply -backend used to known as the 'am' backend, but the name led to +backend used to be known as the 'am' backend, but the name led to confusion as it looks like a verb instead of a noun. Also, the merge backend used to be known as the interactive backend, but it is now used for non-interactive cases as well. Both were renamed based on @@ -620,12 +655,15 @@ commits that started empty, though these are rare in practice. It also drops commits that become empty and has no option for controlling this behavior. -The merge backend keeps intentionally empty commits. Similar to the -apply backend, by default the merge backend drops commits that become -empty unless -i/--interactive is specified (in which case it stops and -asks the user what to do). The merge backend also has an ---empty={drop,keep,ask} option for changing the behavior of handling -commits that become empty. +The merge backend keeps intentionally empty commits by default (though +with -i they are marked as empty in the todo list editor, or they can +be dropped automatically with --no-keep-empty). + +Similar to the apply backend, by default the merge backend drops +commits that become empty unless -i/--interactive is specified (in +which case it stops and asks the user what to do). The merge backend +also has an --empty={drop,keep,ask} option for changing the behavior +of handling commits that become empty. Directory rename detection ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -684,9 +722,17 @@ Hooks ~~~~~ The apply backend has not traditionally called the post-commit hook, -while the merge backend has. However, this was by accident of -implementation rather than by design. Both backends should have the -same behavior, though it is not clear which one is correct. +while the merge backend has. Both have called the post-checkout hook, +though the merge backend has squelched its output. Further, both +backends only call the post-checkout hook with the starting point +commit of the rebase, not the intermediate commits nor the final +commit. In each case, the calling of these hooks was by accident of +implementation rather than by design (both backends were originally +implemented as shell scripts and happened to invoke other commands +like 'git checkout' or 'git commit' that would call the hooks). Both +backends should have the same behavior, though it is not entirely +clear which, if any, is correct. We will likely make rebase stop +calling either of these hooks in the future. Interruptability ~~~~~~~~~~~~~~~~ @@ -1002,7 +1048,8 @@ Only works if the changes (patch IDs based on the diff contents) on 'subsystem' did. In that case, the fix is easy because 'git rebase' knows to skip -changes that are already present in the new upstream. So if you say +changes that are already present in the new upstream (unless +`--reapply-cherry-picks` is given). So if you say (assuming you're on 'topic') ------------ $ git rebase subsystem diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 9d22270757..044276e9da 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -90,9 +90,12 @@ effect to your index in a row. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. -s:: --signoff:: diff --git a/Documentation/gitfaq.txt b/Documentation/gitfaq.txt new file mode 100644 index 0000000000..1cf83df118 --- /dev/null +++ b/Documentation/gitfaq.txt @@ -0,0 +1,337 @@ +gitfaq(7) +========= + +NAME +---- +gitfaq - Frequently asked questions about using Git + +SYNOPSIS +-------- +gitfaq + +DESCRIPTION +----------- + +The examples in this FAQ assume a standard POSIX shell, like `bash` or `dash`, +and a user, A U Thor, who has the account `author` on the hosting provider +`git.example.org`. + +Configuration +------------- + +[[user-name]] +What should I put in `user.name`?:: + You should put your personal name, generally a form using a given name + and family name. For example, the current maintainer of Git uses "Junio + C Hamano". This will be the name portion that is stored in every commit + you make. ++ +This configuration doesn't have any effect on authenticating to remote services; +for that, see `credential.username` in linkgit:git-config[1]. + +[[http-postbuffer]] +What does `http.postBuffer` really do?:: + This option changes the size of the buffer that Git uses when pushing + data to a remote over HTTP or HTTPS. If the data is larger than this + size, libcurl, which handles the HTTP support for Git, will use chunked + transfer encoding since it isn't known ahead of time what the size of + the pushed data will be. ++ +Leaving this value at the default size is fine unless you know that either the +remote server or a proxy in the middle doesn't support HTTP/1.1 (which +introduced the chunked transfer encoding) or is known to be broken with chunked +data. This is often (erroneously) suggested as a solution for generic push +problems, but since almost every server and proxy supports at least HTTP/1.1, +raising this value usually doesn't solve most push problems. A server or proxy +that didn't correctly support HTTP/1.1 and chunked transfer encoding wouldn't be +that useful on the Internet today, since it would break lots of traffic. ++ +Note that increasing this value will increase the memory used on every relevant +push that Git does over HTTP or HTTPS, since the entire buffer is allocated +regardless of whether or not it is all used. Thus, it's best to leave it at the +default unless you are sure you need a different value. + +[[configure-editor]] +How do I configure a different editor?:: + If you haven't specified an editor specifically for Git, it will by default + use the editor you've configured using the `VISUAL` or `EDITOR` environment + variables, or if neither is specified, the system default (which is usually + `vi`). Since some people find `vi` difficult to use or prefer a different + editor, it may be desirable to change the editor used. ++ +If you want to configure a general editor for most programs which need one, you +can edit your shell configuration (e.g., `~/.bashrc` or `~/.zshenv`) to contain +a line setting the `EDITOR` or `VISUAL` environment variable to an appropriate +value. For example, if you prefer the editor `nano`, then you could write the +following: ++ +---- +export VISUAL=nano +---- ++ +If you want to configure an editor specifically for Git, you can either set the +`core.editor` configuration value or the `GIT_EDITOR` environment variable. You +can see linkgit:git-var[1] for details on the order in which these options are +consulted. ++ +Note that in all cases, the editor value will be passed to the shell, so any +arguments containing spaces should be appropriately quoted. Additionally, if +your editor normally detaches from the terminal when invoked, you should specify +it with an argument that makes it not do that, or else Git will not see any +changes. An example of a configuration addressing both of these issues on +Windows would be the configuration `"C:\Program Files\Vim\gvim.exe" --nofork`, +which quotes the filename with spaces and specifies the `--nofork` option to +avoid backgrounding the process. + +Credentials +----------- + +[[http-credentials]] +How do I specify my credentials when pushing over HTTP?:: + The easiest way to do this is to use a credential helper via the + `credential.helper` configuration. Most systems provide a standard + choice to integrate with the system credential manager. For example, + Git for Windows provides the `wincred` credential manager, macOS has the + `osxkeychain` credential manager, and Unix systems with a standard + desktop environment can use the `libsecret` credential manager. All of + these store credentials in an encrypted store to keep your passwords or + tokens secure. ++ +In addition, you can use the `store` credential manager which stores in a file +in your home directory, or the `cache` credential manager, which does not +permanently store your credentials, but does prevent you from being prompted for +them for a certain period of time. ++ +You can also just enter your password when prompted. While it is possible to +place the password (which must be percent-encoded) in the URL, this is not +particularly secure and can lead to accidental exposure of credentials, so it is +not recommended. + +[[http-credentials-environment]] +How do I read a password or token from an environment variable?:: + The `credential.helper` configuration option can also take an arbitrary + shell command that produces the credential protocol on standard output. + This is useful when passing credentials into a container, for example. ++ +Such a shell command can be specified by starting the option value with an +exclamation point. If your password or token were stored in the `GIT_TOKEN`, +you could run the following command to set your credential helper: ++ +---- +$ git config credential.helper \ + '!f() { echo username=author; echo "password=$GIT_TOKEN"; };f' +---- + +[[http-reset-credentials]] +How do I change the password or token I've saved in my credential manager?:: + Usually, if the password or token is invalid, Git will erase it and + prompt for a new one. However, there are times when this doesn't always + happen. To change the password or token, you can erase the existing + credentials and then Git will prompt for new ones. To erase + credentials, use a syntax like the following (substituting your username + and the hostname): ++ +---- +$ echo url=https://author@git.example.org | git credential reject +---- + +[[multiple-accounts-http]] +How do I use multiple accounts with the same hosting provider using HTTP?:: + Usually the easiest way to distinguish between these accounts is to use + the username in the URL. For example, if you have the accounts `author` + and `committer` on `git.example.org`, you can use the URLs + https://author@git.example.org/org1/project1.git and + https://committer@git.example.org/org2/project2.git. This way, when you + use a credential helper, it will automatically try to look up the + correct credentials for your account. If you already have a remote set + up, you can change the URL with something like `git remote set-url + origin https://author@git.example.org/org1/project1.git` (see + linkgit:git-remote[1] for details). + +[[multiple-accounts-ssh]] +How do I use multiple accounts with the same hosting provider using SSH?:: + With most hosting providers that support SSH, a single key pair uniquely + identifies a user. Therefore, to use multiple accounts, it's necessary + to create a key pair for each account. If you're using a reasonably + modern OpenSSH version, you can create a new key pair with something + like `ssh-keygen -t ed25519 -f ~/.ssh/id_committer`. You can then + register the public key (in this case, `~/.ssh/id_committer.pub`; note + the `.pub`) with the hosting provider. ++ +Most hosting providers use a single SSH account for pushing; that is, all users +push to the `git` account (e.g., `git@git.example.org`). If that's the case for +your provider, you can set up multiple aliases in SSH to make it clear which key +pair to use. For example, you could write something like the following in +`~/.ssh/config`, substituting the proper private key file: ++ +---- +# This is the account for author on git.example.org. +Host example_author + HostName git.example.org + User git + # This is the key pair registered for author with git.example.org. + IdentityFile ~/.ssh/id_author + IdentitiesOnly yes +# This is the account for committer on git.example.org. +Host example_committer + HostName git.example.org + User git + # This is the key pair registered for committer with git.example.org. + IdentityFile ~/.ssh/id_committer + IdentitiesOnly yes +---- ++ +Then, you can adjust your push URL to use `git@example_author` or +`git@example_committer` instead of `git@example.org` (e.g., `git remote set-url +git@example_author:org1/project1.git`). + +Common Issues +------------- + +[[last-commit-amend]] +I've made a mistake in the last commit. How do I change it?:: + You can make the appropriate change to your working tree, run `git add + <file>` or `git rm <file>`, as appropriate, to stage it, and then `git + commit --amend`. Your change will be included in the commit, and you'll + be prompted to edit the commit message again; if you wish to use the + original message verbatim, you can use the `--no-edit` option to `git + commit` in addition, or just save and quit when your editor opens. + +[[undo-previous-change]] +I've made a change with a bug and it's been included in the main branch. How should I undo it?:: + The usual way to deal with this is to use `git revert`. This preserves + the history that the original change was made and was a valuable + contribution, but also introduces a new commit that undoes those changes + because the original had a problem. The commit message of the revert + indicates the commit which was reverted and is usually edited to include + an explanation as to why the revert was made. + +[[ignore-tracked-files]] +How do I ignore changes to a tracked file?:: + Git doesn't provide a way to do this. The reason is that if Git needs + to overwrite this file, such as during a checkout, it doesn't know + whether the changes to the file are precious and should be kept, or + whether they are irrelevant and can safely be destroyed. Therefore, it + has to take the safe route and always preserve them. ++ +It's tempting to try to use certain features of `git update-index`, namely the +assume-unchanged and skip-worktree bits, but these don't work properly for this +purpose and shouldn't be used this way. ++ +If your goal is to modify a configuration file, it can often be helpful to have +a file checked into the repository which is a template or set of defaults which +can then be copied alongside and modified as appropriate. This second, modified +file is usually ignored to prevent accidentally committing it. + +Hooks +----- + +[[restrict-with-hooks]] +How do I use hooks to prevent users from making certain changes?:: + The only safe place to make these changes is on the remote repository + (i.e., the Git server), usually in the `pre-receive` hook or in a + continuous integration (CI) system. These are the locations in which + policy can be enforced effectively. ++ +It's common to try to use `pre-commit` hooks (or, for commit messages, +`commit-msg` hooks) to check these things, which is great if you're working as a +solo developer and want the tooling to help you. However, using hooks on a +developer machine is not effective as a policy control because a user can bypass +these hooks with `--no-verify` without being noticed (among various other ways). +Git assumes that the user is in control of their local repositories and doesn't +try to prevent this or tattle on the user. ++ +In addition, some advanced users find `pre-commit` hooks to be an impediment to +workflows that use temporary commits to stage work in progress or that create +fixup commits, so it's better to push these kinds of checks to the server +anyway. + +Cross-Platform Issues +--------------------- + +[[windows-text-binary]] +I'm on Windows and my text files are detected as binary.:: + Git works best when you store text files as UTF-8. Many programs on + Windows support UTF-8, but some do not and only use the little-endian + UTF-16 format, which Git detects as binary. If you can't use UTF-8 with + your programs, you can specify a working tree encoding that indicates + which encoding your files should be checked out with, while still + storing these files as UTF-8 in the repository. This allows tools like + linkgit:git-diff[1] to work as expected, while still allowing your tools + to work. ++ +To do so, you can specify a linkgit:gitattributes[5] pattern with the +`working-tree-encoding` attribute. For example, the following pattern sets all +C files to use UTF-16LE-BOM, which is a common encoding on Windows: ++ +---- +*.c working-tree-encoding=UTF-16LE-BOM +---- ++ +You will need to run `git add --renormalize` to have this take effect. Note +that if you are making these changes on a project that is used across platforms, +you'll probably want to make it in a per-user configuration file or in the one +in `$GIT_DIR/info/attributes`, since making it in a `.gitattributes` file in the +repository will apply to all users of the repository. ++ +See the following entry for information about normalizing line endings as well, +and see linkgit:gitattributes[5] for more information about attribute files. + +[[windows-diff-control-m]] +I'm on Windows and git diff shows my files as having a `^M` at the end.:: + By default, Git expects files to be stored with Unix line endings. As such, + the carriage return (`^M`) that is part of a Windows line ending is shown + because it is considered to be trailing whitespace. Git defaults to showing + trailing whitespace only on new lines, not existing ones. ++ +You can store the files in the repository with Unix line endings and convert +them automatically to your platform's line endings. To do that, set the +configuration option `core.eol` to `native` and see the following entry for +information about how to configure files as text or binary. ++ +You can also control this behavior with the `core.whitespace` setting if you +don't wish to remove the carriage returns from your line endings. + +[[recommended-storage-settings]] +What's the recommended way to store files in Git?:: + While Git can store and handle any file of any type, there are some + settings that work better than others. In general, we recommend that + text files be stored in UTF-8 without a byte-order mark (BOM) with LF + (Unix-style) endings. We also recommend the use of UTF-8 (again, + without BOM) in commit messages. These are the settings that work best + across platforms and with tools such as `git diff` and `git merge`. ++ +Additionally, if you have a choice between storage formats that are text based +or non-text based, we recommend storing files in the text format and, if +necessary, transforming them into the other format. For example, a text-based +SQL dump with one record per line will work much better for diffing and merging +than an actual database file. Similarly, text-based formats such as Markdown +and AsciiDoc will work better than binary formats such as Microsoft Word and +PDF. ++ +Similarly, storing binary dependencies (e.g., shared libraries or JAR files) or +build products in the repository is generally not recommended. Dependencies and +build products are best stored on an artifact or package server with only +references, URLs, and hashes stored in the repository. ++ +We also recommend setting a linkgit:gitattributes[5] file to explicitly mark +which files are text and which are binary. If you want Git to guess, you can +set the attribute `text=auto`. For example, the following might be appropriate +in some projects: ++ +---- +# By default, guess. +* text=auto +# Mark all C files as text. +*.c text +# Mark all JPEG files as binary. +*.jpg binary +---- ++ +These settings help tools pick the right format for output such as patches and +result in files being checked out in the appropriate line ending for the +platform. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 3dccab5375..81f2a87e88 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -522,12 +522,61 @@ The exit status determines whether git will use the data from the hook to limit its search. On error, it will fall back to verifying all files and folders. +p4-changelist +~~~~~~~~~~~~~ + +This hook is invoked by `git-p4 submit`. + +The `p4-changelist` hook is executed after the changelist +message has been edited by the user. It can be bypassed with the +`--no-verify` option. It takes a single parameter, the name +of the file that holds the proposed changelist text. Exiting +with a non-zero status causes the command to abort. + +The hook is allowed to edit the changelist file and can be used +to normalize the text into some project standard format. It can +also be used to refuse the Submit after inspect the message file. + +Run `git-p4 submit --help` for details. + +p4-prepare-changelist +~~~~~~~~~~~~~~~~~~~~~ + +This hook is invoked by `git-p4 submit`. + +The `p4-prepare-changelist` hook is executed right after preparing +the default changelist message and before the editor is started. +It takes one parameter, the name of the file that contains the +changelist text. Exiting with a non-zero status from the script +will abort the process. + +The purpose of the hook is to edit the message file in place, +and it is not supressed by the `--no-verify` option. This hook +is called even if `--prepare-p4-only` is set. + +Run `git-p4 submit --help` for details. + +p4-post-changelist +~~~~~~~~~~~~~~~~~~ + +This hook is invoked by `git-p4 submit`. + +The `p4-post-changelist` hook is invoked after the submit has +successfully occured in P4. It takes no parameters and is meant +primarily for notification and cannot affect the outcome of the +git p4 submit action. + +Run `git-p4 submit --help` for details. + p4-pre-submit ~~~~~~~~~~~~~ This hook is invoked by `git-p4 submit`. It takes no parameters and nothing from standard input. Exiting with non-zero status from this script prevent -`git-p4 submit` from launching. Run `git-p4 submit --help` for details. +`git-p4 submit` from launching. It can be bypassed with the `--no-verify` +command line option. Run `git-p4 submit --help` for details. + + post-index-change ~~~~~~~~~~~~~~~~~ diff --git a/Documentation/manpage-1.72.xsl b/Documentation/manpage-1.72.xsl deleted file mode 100644 index b4d315cb8c..0000000000 --- a/Documentation/manpage-1.72.xsl +++ /dev/null @@ -1,14 +0,0 @@ -<!-- manpage-1.72.xsl: - special settings for manpages rendered from asciidoc+docbook - handles peculiarities in docbook-xsl 1.72.0 --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<xsl:import href="manpage-base.xsl"/> - -<!-- these are the special values for the roff control characters - needed for docbook-xsl 1.72.0 --> -<xsl:param name="git.docbook.backslash">▓</xsl:param> -<xsl:param name="git.docbook.dot" >⌂</xsl:param> - -</xsl:stylesheet> diff --git a/Documentation/manpage-base.xsl b/Documentation/manpage-base.xsl deleted file mode 100644 index a264fa6160..0000000000 --- a/Documentation/manpage-base.xsl +++ /dev/null @@ -1,35 +0,0 @@ -<!-- manpage-base.xsl: - special formatting for manpages rendered from asciidoc+docbook --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<!-- these params silence some output from xmlto --> -<xsl:param name="man.output.quietly" select="1"/> -<xsl:param name="refentry.meta.get.quietly" select="1"/> - -<!-- convert asciidoc callouts to man page format; - git.docbook.backslash and git.docbook.dot params - must be supplied by another XSL file or other means --> -<xsl:template match="co"> - <xsl:value-of select="concat( - $git.docbook.backslash,'fB(', - substring-after(@id,'-'),')', - $git.docbook.backslash,'fR')"/> -</xsl:template> -<xsl:template match="calloutlist"> - <xsl:value-of select="$git.docbook.dot"/> - <xsl:text>sp </xsl:text> - <xsl:apply-templates/> - <xsl:text> </xsl:text> -</xsl:template> -<xsl:template match="callout"> - <xsl:value-of select="concat( - $git.docbook.backslash,'fB', - substring-after(@arearefs,'-'), - '. ',$git.docbook.backslash,'fR')"/> - <xsl:apply-templates/> - <xsl:value-of select="$git.docbook.dot"/> - <xsl:text>br </xsl:text> -</xsl:template> - -</xsl:stylesheet> diff --git a/Documentation/manpage-bold-literal.xsl b/Documentation/manpage-bold-literal.xsl index 94d6c1b545..e13db85693 100644 --- a/Documentation/manpage-bold-literal.xsl +++ b/Documentation/manpage-bold-literal.xsl @@ -8,11 +8,9 @@ this makes literal text easier to distinguish in manpages viewed on a tty --> <xsl:template match="literal|d:literal"> - <xsl:value-of select="$git.docbook.backslash"/> - <xsl:text>fB</xsl:text> + <xsl:text>\fB</xsl:text> <xsl:apply-templates/> - <xsl:value-of select="$git.docbook.backslash"/> - <xsl:text>fR</xsl:text> + <xsl:text>\fR</xsl:text> </xsl:template> </xsl:stylesheet> diff --git a/Documentation/manpage-normal.xsl b/Documentation/manpage-normal.xsl index a48f5b11f3..a9c7ec69f4 100644 --- a/Documentation/manpage-normal.xsl +++ b/Documentation/manpage-normal.xsl @@ -1,13 +1,26 @@ <!-- manpage-normal.xsl: - special settings for manpages rendered from asciidoc+docbook - handles anything we want to keep away from docbook-xsl 1.72.0 --> + special settings for manpages rendered from asciidoc+docbook --> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> -<xsl:import href="manpage-base.xsl"/> -<!-- these are the normal values for the roff control characters --> -<xsl:param name="git.docbook.backslash">\</xsl:param> -<xsl:param name="git.docbook.dot" >.</xsl:param> +<!-- these params silence some output from xmlto --> +<xsl:param name="man.output.quietly" select="1"/> +<xsl:param name="refentry.meta.get.quietly" select="1"/> + +<!-- convert asciidoc callouts to man page format --> +<xsl:template match="co"> + <xsl:value-of select="concat('\fB(',substring-after(@id,'-'),')\fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:text>.sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat('\fB',substring-after(@arearefs,'-'),'. \fR')"/> + <xsl:apply-templates/> + <xsl:text>.br </xsl:text> +</xsl:template> </xsl:stylesheet> diff --git a/Documentation/manpage-suppress-sp.xsl b/Documentation/manpage-suppress-sp.xsl deleted file mode 100644 index a63c7632a8..0000000000 --- a/Documentation/manpage-suppress-sp.xsl +++ /dev/null @@ -1,21 +0,0 @@ -<!-- manpage-suppress-sp.xsl: - special settings for manpages rendered from asciidoc+docbook - handles erroneous, inline .sp in manpage output of some - versions of docbook-xsl --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<!-- attempt to work around spurious .sp at the tail of the line - that some versions of docbook stylesheets seem to add --> -<xsl:template match="simpara"> - <xsl:variable name="content"> - <xsl:apply-templates/> - </xsl:variable> - <xsl:value-of select="normalize-space($content)"/> - <xsl:if test="not(ancestor::authorblurb) and - not(ancestor::personblurb)"> - <xsl:text> </xsl:text> - </xsl:if> -</xsl:template> - -</xsl:stylesheet> diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 40dc4f5e8c..fb3a6e8d42 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -61,9 +61,12 @@ When not possible, refuse to merge and exit with a non-zero status. -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign the resulting merge commit. The `keyid` argument is optional and defaults to the committer identity; if specified, - it must be stuck to the option without a space. + it must be stuck to the option without a space. `--no-gpg-sign` + is useful to countermand both `commit.gpgSign` configuration variable, + and earlier `--gpg-sign`. --log[=<n>]:: --no-log:: diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index 7d3a60f5b9..95ea849902 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -19,7 +19,8 @@ ifndef::git-pull[] (see <<CRTB,CONFIGURED REMOTE-TRACKING BRANCHES>> below). endif::git-pull[] ifdef::git-pull[] - (see linkgit:git-fetch[1]). + (see the section "CONFIGURED REMOTE-TRACKING BRANCHES" + in linkgit:git-fetch[1]). endif::git-pull[] + The format of a <refspec> parameter is an optional plus diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index bfd02ade99..04ad7dd36e 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -342,6 +342,12 @@ Default mode:: branches if the end result is the same (i.e. merging branches with the same content) +--show-pulls:: + Include all commits from the default mode, but also any merge + commits that are not TREESAME to the first parent but are + TREESAME to a later parent. This mode is helpful for showing + the merge commits that "first introduced" a change to a branch. + --full-history:: Same as the default mode, but does not prune some history. @@ -534,7 +540,7 @@ Note the major differences in `N`, `P`, and `Q` over `--full-history`: parent and is TREESAME. -- -Finally, there is a fifth simplification mode available: +There is another simplification mode available: --ancestry-path:: Limit the displayed commits to those directly on the ancestry @@ -573,6 +579,132 @@ option does. Applied to the 'D..M' range, it results in: L--M ----------------------------------------------------------------------- +Before discussing another option, `--show-pulls`, we need to +create a new example history. ++ +A common problem users face when looking at simplified history is that a +commit they know changed a file somehow does not appear in the file's +simplified history. Let's demonstrate a new example and show how options +such as `--full-history` and `--simplify-merges` works in that case: ++ +----------------------------------------------------------------------- + .-A---M-----C--N---O---P + / / \ \ \/ / / + I B \ R-'`-Z' / + \ / \/ / + \ / /\ / + `---X--' `---Y--' +----------------------------------------------------------------------- ++ +For this example, suppose `I` created `file.txt` which was modified by +`A`, `B`, and `X` in different ways. The single-parent commits `C`, `Z`, +and `Y` do not change `file.txt`. The merge commit `M` was created by +resolving the merge conflict to include both changes from `A` and `B` +and hence is not TREESAME to either. The merge commit `R`, however, was +created by ignoring the contents of `file.txt` at `M` and taking only +the contents of `file.txt` at `X`. Hence, `R` is TREESAME to `X` but not +`M`. Finally, the natural merge resolution to create `N` is to take the +contents of `file.txt` at `R`, so `N` is TREESAME to `R` but not `C`. +The merge commits `O` and `P` are TREESAME to their first parents, but +not to their second parents, `Z` and `Y` respectively. ++ +When using the default mode, `N` and `R` both have a TREESAME parent, so +those edges are walked and the others are ignored. The resulting history +graph is: ++ +----------------------------------------------------------------------- + I---X +----------------------------------------------------------------------- ++ +When using `--full-history`, Git walks every edge. This will discover +the commits `A` and `B` and the merge `M`, but also will reveal the +merge commits `O` and `P`. With parent rewriting, the resulting graph is: ++ +----------------------------------------------------------------------- + .-A---M--------N---O---P + / / \ \ \/ / / + I B \ R-'`--' / + \ / \/ / + \ / /\ / + `---X--' `------' +----------------------------------------------------------------------- ++ +Here, the merge commits `O` and `P` contribute extra noise, as they did +not actually contribute a change to `file.txt`. They only merged a topic +that was based on an older version of `file.txt`. This is a common +issue in repositories using a workflow where many contributors work in +parallel and merge their topic branches along a single trunk: manu +unrelated merges appear in the `--full-history` results. ++ +When using the `--simplify-merges` option, the commits `O` and `P` +disappear from the results. This is because the rewritten second parents +of `O` and `P` are reachable from their first parents. Those edges are +removed and then the commits look like single-parent commits that are +TREESAME to their parent. This also happens to the commit `N`, resulting +in a history view as follows: ++ +----------------------------------------------------------------------- + .-A---M--. + / / \ + I B R + \ / / + \ / / + `---X--' +----------------------------------------------------------------------- ++ +In this view, we see all of the important single-parent changes from +`A`, `B`, and `X`. We also see the carefully-resolved merge `M` and the +not-so-carefully-resolved merge `R`. This is usually enough information +to determine why the commits `A` and `B` "disappeared" from history in +the default view. However, there are a few issues with this approach. ++ +The first issue is performance. Unlike any previous option, the +`--simplify-merges` option requires walking the entire commit history +before returning a single result. This can make the option difficult to +use for very large repositories. ++ +The second issue is one of auditing. When many contributors are working +on the same repository, it is important which merge commits introduced +a change into an important branch. The problematic merge `R` above is +not likely to be the merge commit that was used to merge into an +important branch. Instead, the merge `N` was used to merge `R` and `X` +into the important branch. This commit may have information about why +the change `X` came to override the changes from `A` and `B` in its +commit message. ++ +The `--show-pulls` option helps with both of these issues by adding more +merge commits to the history results. If a merge is not TREESAME to its +first parent but is TREESAME to a later parent, then that merge is +treated as if it "pulled" the change from another branch. When using +`--show-pulls` on this example (and no other options) the resulting +graph is: ++ +----------------------------------------------------------------------- + I---X---R---N +----------------------------------------------------------------------- ++ +Here, the merge commits `R` and `N` are included because they pulled +the commits `X` and `R` into the base branch, respectively. These +merges are the reason the commits `A` and `B` do not appear in the +default history. ++ +When `--show-pulls` is paired with `--simplify-merges`, the +graph includes all of the necessary information: ++ +----------------------------------------------------------------------- + .-A---M--. N + / / \ / + I B R + \ / / + \ / / + `---X--' +----------------------------------------------------------------------- ++ +Notice that since `M` is reachable from `R`, the edge from `N` to `M` +was simplified away. However, `N` still appears in the history as an +important commit because it "pulled" the change `R` into the main +branch. + The `--simplify-by-decoration` option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt index 4f07ceadcb..6b6085585d 100644 --- a/Documentation/technical/api-trace2.txt +++ b/Documentation/technical/api-trace2.txt @@ -656,7 +656,8 @@ The "exec_id" field is a command-unique id and is only useful if the ------------ `"def_param"`:: - This event is generated to log a global parameter. + This event is generated to log a global parameter, such as a config + setting, command-line flag, or environment variable. + ------------ { diff --git a/Documentation/user-manual.conf b/Documentation/user-manual.conf index d87294de2f..0148f126dc 100644 --- a/Documentation/user-manual.conf +++ b/Documentation/user-manual.conf @@ -9,13 +9,3 @@ tilde=~ [linkgit-inlinemacro] <ulink url="{target}.html">{target}{0?({0})}</ulink> - -ifdef::backend-docbook[] -# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. -[listingblock] -<example><title>{title}</title> -<literallayout class="monospaced"> -| -</literallayout> -{title#}</example> -endif::backend-docbook[] |