diff options
Diffstat (limited to 'Documentation')
147 files changed, 2320 insertions, 1022 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 4797b2dc35..04f69cf64e 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -204,7 +204,7 @@ install-pdf: pdf install-html: html '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir) -../GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE +../GIT-VERSION-FILE: FORCE $(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) GIT-VERSION-FILE -include ../GIT-VERSION-FILE @@ -264,7 +264,9 @@ manpage-base-url.xsl: manpage-base-url.xsl.in mv $@+ $@ user-manual.xml: user-manual.txt user-manual.conf - $(QUIET_ASCIIDOC)$(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d book $< + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d book -o $@+ $< && \ + mv $@+ $@ technical/api-index.txt: technical/api-index-skel.txt \ technical/api-index.sh $(patsubst %,%.txt,$(API_DOCS)) @@ -278,7 +280,9 @@ XSLT = docbook.xsl XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css user-manual.html: user-manual.xml - $(QUIET_XSLTPROC)xsltproc $(XSLTOPTS) -o $@ $(XSLT) $< + $(QUIET_XSLTPROC)$(RM) $@+ $@ && \ + xsltproc $(XSLTOPTS) -o $@+ $(XSLT) $< && \ + mv $@+ $@ git.info: user-manual.texi $(QUIET_MAKEINFO)$(MAKEINFO) --no-split -o $@ user-manual.texi @@ -337,4 +341,4 @@ quick-install-man: quick-install-html: '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir) -.PHONY: .FORCE-GIT-VERSION-FILE +.PHONY: FORCE diff --git a/Documentation/RelNotes-1.7.0.1.txt b/Documentation/RelNotes-1.7.0.1.txt new file mode 100644 index 0000000000..8ff5bcada8 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.1.txt @@ -0,0 +1,35 @@ +Git v1.7.0.1 Release Notes +========================== + +Fixes since v1.7.0 +------------------ + + * In a freshly created repository "rev-parse HEAD^0" complained that + it is dangling symref, even though "rev-parse HEAD" didn't. + + * "git show :no-such-name" tried to access the index without bounds + check, leading to a potential segfault. + + * Message from "git cherry-pick" was harder to read and use than necessary + when it stopped due to conflicting changes. + + * We referred to ".git/refs/" throughout the documentation when we + meant to talk about abstract notion of "ref namespace". Because + people's repositories often have packed refs these days, this was + confusing. + + * "git diff --output=/path/that/cannot/be/written" did not correctly + error out. + + * "git grep -e -pattern-that-begin-with-dash paths..." could not be + spelled as "git grep -- -pattern-that-begin-with-dash paths..." which + would be a GNU way to use "--" as "end of options". + + * "git grep" compiled with threading support tried to access an + uninitialized mutex on boxes with a single CPU. + + * "git stash pop -q --index" failed because the unnecessary --index + option was propagated to "git stash drop" that is internally run at the + end. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.2.txt b/Documentation/RelNotes-1.7.0.2.txt new file mode 100644 index 0000000000..fcb46ca6a4 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.2.txt @@ -0,0 +1,40 @@ +Git v1.7.0.2 Release Notes +========================== + +Fixes since v1.7.0.1 +-------------------- + + * GIT_PAGER was not honored consistently by some scripted Porcelains, most + notably "git am". + + * updating working tree files after telling git to add them to the + index and while it is still working created garbage object files in + the repository without diagnosing it as an error. + + * "git bisect -- pathspec..." did not diagnose an error condition properly when + the simplification with given pathspec made the history empty. + + * "git rev-list --cherry-pick A...B" now has an obvious optimization when the + histories haven't diverged (i.e. when one end is an ancestor of the other). + + * "git diff --quiet -w" did not work as expected. + + * "git fast-import" didn't work with a large input, as it lacked support + for producing the pack index in v2 format. + + * "git imap-send" didn't use CRLF line endings over the imap protocol + when storing its payload to the draft box, violating RFC 3501. + + * "git log --format='%w(x,y,z)%b'" and friends that rewrap message + has been optimized for utf-8 payload. + + * Error messages generated on the receiving end did not come back to "git + push". + + * "git status" in 1.7.0 lacked the optimization we used to have in 1.6.X series + to speed up scanning of large working tree. + + * "gitweb" did not diagnose parsing errors properly while reading tis configuration + file. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.3.txt b/Documentation/RelNotes-1.7.0.3.txt new file mode 100644 index 0000000000..3b355737c0 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.3.txt @@ -0,0 +1,34 @@ +Git v1.7.0.3 Release Notes +========================== + +Fixes since v1.7.0.2 +-------------------- + + * Object files are created in a more ACL friendly way in repositories + where group permission is ACL controlled. + + * "git add -i" didn't handle a deleted path very well. + + * "git blame" padded line numbers with one extra SP when the total number + of lines was one less than multiple of ten due to an off-by-one error. + + * "git fetch --all/--multi" used to discard information for remotes that + are fetched earlier. + + * "git log --author=me --grep=it" tried to find commits that have "it" + or are written by "me", instead of the ones that have "it" _and_ are + written by "me". + + * "git log -g branch" misbehaved when there was no entries in the reflog + for the named branch. + + * "git mailinfo" (hence "git am") incorrectly removed initial indent from + paragraphs. + + * "git prune" and "git reflog" (hence "git gc" as well) didn't honor + an instruction never to expire by setting gc.reflogexpire to never. + + * "git push" misbehaved when branch.<name>.merge was configured without + matching branch.<name>.remote. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.4.txt b/Documentation/RelNotes-1.7.0.4.txt new file mode 100644 index 0000000000..cf7f60e60d --- /dev/null +++ b/Documentation/RelNotes-1.7.0.4.txt @@ -0,0 +1,27 @@ +Git v1.7.0.4 Release Notes +========================== + +Fixes since v1.7.0.3 +-------------------- + + * Optimized ntohl/htonl on big-endian machines were broken. + + * Color values given to "color.<cmd>.<slot>" configuration can now have + more than one attributes (e.g. "bold ul"). + + * "git add -u nonexistent-path" did not complain. + + * "git apply --whitespace=fix" didn't work well when an early patch in + a patch series adds trailing blank lines and a later one depended on + such a block of blank lines at the end. + + * "git fast-export" didn't check error status and stop when marks file + cannot be opened. + + * "git format-patch --ignore-if-in-upstream" gave unwarranted errors + when the range was empty, instead of silently finishing. + + * "git remote prune" did not detect remote tracking refs that became + dangling correctly. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.5.txt b/Documentation/RelNotes-1.7.0.5.txt new file mode 100644 index 0000000000..3149c91b7b --- /dev/null +++ b/Documentation/RelNotes-1.7.0.5.txt @@ -0,0 +1,26 @@ +Git v1.7.0.5 Release Notes +========================== + +Fixes since v1.7.0.4 +-------------------- + + * "git daemon" failed to compile on platforms without sockaddr_storage type. + + * Output from "git rev-list --pretty=oneline" was unparsable when a + commit did not have any message, which is abnormal but possible in a + repository converted from foreign scm. + + * "git stash show <commit-that-is-not-a-stash>" gave an error message + that was not so useful. Reworded the message to "<it> is not a + stash". + + * Python scripts in contrib/ area now start with "#!/usr/bin/env python" + to honor user's PATH. + + * "git imap-send" used to mistake any line that begins with "From " as a + message separator in format-patch output. + + * Smart http server backend failed to report an internal server error and + infinitely looped instead after output pipe was closed. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.6.txt b/Documentation/RelNotes-1.7.0.6.txt new file mode 100644 index 0000000000..b2852b67d0 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.6.txt @@ -0,0 +1,13 @@ +Git v1.7.0.6 Release Notes +========================== + +Fixes since v1.7.0.5 +-------------------- + + * "git diff --stat" used "int" to count the size of differences, + which could result in overflowing. + + * "git rev-list --abbrev-commit" defaulted to 40-byte abbreviations, unlike + newer tools in the git toolset. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.7.txt b/Documentation/RelNotes-1.7.0.7.txt new file mode 100644 index 0000000000..d0cb7ca7e2 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.7.txt @@ -0,0 +1,16 @@ +Git v1.7.0.7 Release Notes +========================== + +Fixes since v1.7.0.6 +-------------------- + + * "make NO_CURL=NoThanks install" was broken. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.txt b/Documentation/RelNotes-1.7.0.txt new file mode 100644 index 0000000000..43e3f33615 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.txt @@ -0,0 +1,214 @@ +Git v1.7.0 Release Notes +======================== + +Notes on behaviour change +------------------------- + + * "git push" into a branch that is currently checked out (i.e. pointed at by + HEAD in a repository that is not bare) is refused by default. + + Similarly, "git push $there :$killed" to delete the branch $killed + in a remote repository $there, when $killed branch is the current + branch pointed at by its HEAD, will be refused by default. + + Setting the configuration variables receive.denyCurrentBranch and + receive.denyDeleteCurrent to 'ignore' in the receiving repository + can be used to override these safety features. + + * "git send-email" does not make deep threads by default when sending a + patch series with more than two messages. All messages will be sent + as a reply to the first message, i.e. cover letter. + + It has been possible already to configure send-email to send "shallow thread" + by setting sendemail.chainreplyto configuration variable to false. The + only thing this release does is to change the default when you haven't + configured that variable. + + * "git status" is not "git commit --dry-run" anymore. This change does + not affect you if you run the command without argument. + + * "git diff" traditionally treated various "ignore whitespace" options + only as a way to filter the patch output. "git diff --exit-code -b" + exited with non-zero status even if all changes were about changing the + amount of whitespace and nothing else; and "git diff -b" showed the + "diff --git" header line for such a change without patch text. + + In this release, the "ignore whitespaces" options affect the semantics + of the diff operation. A change that does not affect anything but + whitespaces is reported with zero exit status when run with + --exit-code, and there is no "diff --git" header for such a change. + + * External diff and textconv helpers are now executed using the shell. + This makes them consistent with other programs executed by git, and + allows you to pass command-line parameters to the helpers. Any helper + paths containing spaces or other metacharacters now need to be + shell-quoted. The affected helpers are GIT_EXTERNAL_DIFF in the + environment, and diff.*.command and diff.*.textconv in the config + file. + + * The --max-pack-size argument to 'git repack', 'git pack-objects', and + 'git fast-import' was assuming the provided size to be expressed in MiB, + unlike the corresponding config variable and other similar options accepting + a size value. It is now expecting a size expressed in bytes, with a possible + unit suffix of 'k', 'm', or 'g'. + +Updates since v1.6.6 +-------------------- + +(subsystems) + + * "git fast-import" updates; adds "option" and "feature" to detect the + mismatch between fast-import and the frontends that produce the input + stream. + + * "git svn" support of subversion "merge tickets" and miscellaneous fixes. + + * "gitk" and "git gui" translation updates. + + * "gitweb" updates (code clean-up, load checking etc.) + +(portability) + + * Some more MSVC portability patches for msysgit port. + + * Minimum Pthreads emulation for msysgit port. + +(performance) + + * More performance improvement patches for msysgit port. + +(usability, bells and whistles) + + * More commands learned "--quiet" and "--[no-]progress" options. + + * Various commands given by the end user (e.g. diff.type.textconv, + and GIT_EDITOR) can be specified with command line arguments. E.g. it + is now possible to say "[diff "utf8doc"] textconv = nkf -w". + + * "sparse checkout" feature allows only part of the work tree to be + checked out. + + * HTTP transfer can use authentication scheme other than basic + (i.e./e.g. digest). + + * Switching from a version of superproject that used to have a submodule + to another version of superproject that no longer has it did not remove + the submodule directory when it should (namely, when you are not + interested in the submodule at all and didn't clone/checkout). + + * A new attribute conflict-marker-size can be used to change the size of + the conflict markers from the default 7; this is useful when tracked + contents (e.g. git-merge documentation) have strings that resemble the + conflict markers. + + * A new syntax "<branch>@{upstream}" can be used on the command line to + substitute the name of the "upstream" of the branch. Missing branch + defaults to the current branch, so "git fetch && git merge @{upstream}" + will be equivalent to "git pull". + + * "git am --resolved" has a synonym "git am --continue". + + * "git branch --set-upstream" can be used to update the (surprise!) upstream, + i.e. where the branch is supposed to pull and merge from (or rebase onto). + + * "git checkout A...B" is a way to detach HEAD at the merge base between + A and B. + + * "git checkout -m path" to reset the work tree file back into the + conflicted state works even when you already ran "git add path" and + resolved the conflicts. + + * "git commit --date='<date>'" can be used to override the author date + just like "git commit --author='<name> <email>'" can be used to + override the author identity. + + * "git commit --no-status" can be used to omit the listing of the index + and the work tree status in the editor used to prepare the log message. + + * "git commit" warns a bit more aggressively until you configure user.email, + whose default value almost always is not (and fundamentally cannot be) + what you want. + + * "git difftool" has been extended to make it easier to integrate it + with gitk. + + * "git fetch --all" can now be used in place of "git remote update". + + * "git grep" does not rely on external grep anymore. It can use more than + one thread to accelerate the operation. + + * "git grep" learned "--quiet" option. + + * "git log" and friends learned "--glob=heads/*" syntax that is a more + flexible way to complement "--branches/--tags/--remotes". + + * "git merge" learned to pass options specific to strategy-backends. E.g. + + - "git merge -Xsubtree=path/to/directory" can be used to tell the subtree + strategy how much to shift the trees explicitly. + + - "git merge -Xtheirs" can be used to auto-merge as much as possible, + while discarding your own changes and taking merged version in + conflicted regions. + + * "git push" learned "git push origin --delete branch", a syntactic sugar + for "git push origin :branch". + + * "git push" learned "git push --set-upstream origin forker:forkee" that + lets you configure your "forker" branch to later pull from "forkee" + branch at "origin". + + * "git rebase --onto A...B" means the history is replayed on top of the + merge base between A and B. + + * "git rebase -i" learned new action "fixup" that squashes the change + but does not affect existing log message. + + * "git rebase -i" also learned --autosquash option that is useful + together with the new "fixup" action. + + * "git remote" learned set-url subcommand that updates (surprise!) url + for an existing remote nickname. + + * "git rerere" learned "forget path" subcommand. Together with "git + checkout -m path" it will be useful when you recorded a wrong + resolution. + + * Use of "git reset --merge" has become easier when resetting away a + conflicted mess left in the work tree. + + * "git rerere" had rerere.autoupdate configuration but there was no way + to countermand it from the command line; --no-rerere-autoupdate option + given to "merge", "revert", etc. fixes this. + + * "git status" learned "-s(hort)" output format. + +(developers) + + * The infrastructure to build foreign SCM interface has been updated. + + * Many more commands are now built-in. + + * THREADED_DELTA_SEARCH is no more. If you build with threads, delta + compression will always take advantage of it. + +Fixes since v1.6.6 +------------------ + +All of the fixes in v1.6.6.X maintenance series are included in this +release, unless otherwise noted. + + * "git branch -d branch" used to refuse deleting the branch even when + the branch is fully merged to its upstream branch if it is not merged + to the current branch. It now deletes it in such a case. + + * "fiter-branch" command incorrectly said --prune-empty and --filter-commit + were incompatible; the latter should be read as --commit-filter. + + * When using "git status" or asking "git diff" to compare the work tree + with something, they used to consider that a checked-out submodule with + uncommitted changes is not modified; this could cause people to forget + committing these changes in the submodule before committing in the + superproject. They now consider such a change as a modification and + "git diff" will append a "-dirty" to the work tree side when generating + patch output or when used with the --submodule option. diff --git a/Documentation/RelNotes/1.7.0.8.txt b/Documentation/RelNotes/1.7.0.8.txt new file mode 100644 index 0000000000..7f05b48e17 --- /dev/null +++ b/Documentation/RelNotes/1.7.0.8.txt @@ -0,0 +1,10 @@ +Git v1.7.0.8 Release Notes +========================== + +This is primarily to backport support for the new "add.ignoreErrors" +name given to the existing "add.ignore-errors" configuration variable. + +The next version, Git 1.7.4, and future versions, will support both +old and incorrect name and the new corrected name, but without this +backport, users who want to use the new name "add.ignoreErrors" in +their repositories cannot use older versions of Git. diff --git a/Documentation/RelNotes/1.7.0.9.txt b/Documentation/RelNotes/1.7.0.9.txt new file mode 100644 index 0000000000..bfb3166387 --- /dev/null +++ b/Documentation/RelNotes/1.7.0.9.txt @@ -0,0 +1,8 @@ +Git v1.7.0.9 Release Notes +========================== + +Fixes since v1.7.0.8 +-------------------- + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 4833cac4b9..d8205691c6 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -79,14 +79,15 @@ of lines before or after the line given by <start>. of the --date option at linkgit:git-log[1]. -M|<num>|:: - Detect moving lines in the file as well. When a commit - moves a block of lines in a file (e.g. the original file - has A and then B, and the commit changes it to B and - then A), the traditional 'blame' algorithm typically blames - the lines that were moved up (i.e. B) to the parent and - assigns blame to the lines that were moved down (i.e. A) - to the child commit. With this option, both groups of lines - are blamed on the parent. + Detect moved or copied lines within a file. When a commit + moves or copies a block of lines (e.g. the original file + has A and then B, and the commit changes it to B and then + A), the traditional 'blame' algorithm notices only half of + the movement and typically blames the lines that were moved + up (i.e. B) to the parent and assigns blame to the lines that + were moved down (i.e. A) to the child commit. With this + option, both groups of lines are blamed on the parent by + running extra passes of inspection. + <num> is optional but it is the lower bound on the number of alphanumeric characters that git must detect as moving @@ -94,7 +95,7 @@ within a file for it to associate those lines with the parent commit. -C|<num>|:: - In addition to `-M`, detect lines copied from other + In addition to `-M`, detect lines moved or copied from other files that were modified in the same commit. This is useful when you reorganize your program and move code around across files. When this option is given twice, diff --git a/Documentation/config.txt b/Documentation/config.txt index b16a20bc36..ce9c2509b6 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -64,7 +64,7 @@ The values following the equals sign in variable assign are all either a string, an integer, or a boolean. Boolean values may be given as yes/no, 0/1, true/false or on/off. Case is not significant in boolean values, when converting value to the canonical form using '--bool' type specifier; -'git-config' will ensure that the output is "true" or "false". +'git config' will ensure that the output is "true" or "false". String values may be entirely or partially enclosed in double quotes. You need to enclose variable values in double quotes if you want to @@ -130,6 +130,19 @@ advice.*:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwritting local changes. Default: true. + resolveConflict:: + Advices shown by various commands when conflicts + prevent the operation from being performed. + Default: true. + implicitIdentity:: + Advice on how to set your identity configuration when + your information is guessed from the system username and + domain name. Default: true. + + detachedHead:: + Advice shown when you used linkgit::git-checkout[1] to + move to the detach HEAD state, to instruct how to create + a local branch after the fact. Default: true. -- core.fileMode:: @@ -185,11 +198,11 @@ core.quotepath:: core.autocrlf:: If true, makes git convert `CRLF` at the end of lines in text files to - `LF` when reading from the filesystem, and convert in reverse when - writing to the filesystem. The variable can be set to + `LF` when reading from the work tree, and convert in reverse when + writing to the work tree. The variable can be set to 'input', in which case the conversion happens only while - reading from the filesystem but files are written out with - `LF` at the end of lines. A file is considered + reading from the work tree but files are written out to the work + tree with `LF` at the end of lines. A file is considered "text" (i.e. be subjected to the autocrlf mechanism) based on the file's `crlf` attribute, or if `crlf` is unspecified, based on the file's contents. See linkgit:gitattributes[5]. @@ -456,8 +469,8 @@ core.pager:: core.whitespace:: A comma separated list of common whitespace problems to - notice. 'git-diff' will use `color.diff.whitespace` to - highlight them, and 'git-apply --whitespace=error' will + notice. 'git diff' will use `color.diff.whitespace` to + highlight them, and 'git apply --whitespace=error' will consider them as errors. You can prefix `-` to disable any of them (e.g. `-trailing-space`): + @@ -516,10 +529,18 @@ notes should be printed. This setting defaults to "refs/notes/commits", and can be overridden by the `GIT_NOTES_REF` environment variable. +core.sparseCheckout:: + Enable "sparse checkout" feature. See section "Sparse checkout" in + linkgit:git-read-tree[1] for more information. + add.ignore-errors:: - Tells 'git-add' to continue adding files when some files cannot be +add.ignoreErrors:: + Tells 'git add' to continue adding files when some files cannot be added due to indexing errors. Equivalent to the '--ignore-errors' - option of linkgit:git-add[1]. + option of linkgit:git-add[1]. Older versions of git accept only + `add.ignore-errors`, which does not follow the usual naming + convention for configuration variables. Newer versions of git + honor `add.ignoreErrors` as well. alias.*:: Command aliases for the linkgit:git[1] command wrapper - e.g. @@ -539,19 +560,19 @@ executed from the top-level directory of a repository, which may not necessarily be the current directory. apply.ignorewhitespace:: - When set to 'change', tells 'git-apply' to ignore changes in + When set to 'change', tells 'git apply' to ignore changes in whitespace, in the same way as the '--ignore-space-change' option. - When set to one of: no, none, never, false tells 'git-apply' to + When set to one of: no, none, never, false tells 'git apply' to respect all whitespace differences. See linkgit:git-apply[1]. apply.whitespace:: - Tells 'git-apply' how to handle whitespaces, in the same way + Tells 'git apply' how to handle whitespaces, in the same way as the '--whitespace' option. See linkgit:git-apply[1]. branch.autosetupmerge:: - Tells 'git-branch' and 'git-checkout' to set up new branches + Tells 'git branch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from the starting point branch. Note that even if this option is not set, this behavior can be chosen per-branch using the `--track` @@ -562,7 +583,7 @@ branch.autosetupmerge:: branch. This option defaults to true. branch.autosetuprebase:: - When a new branch is created with 'git-branch' or 'git-checkout' + When a new branch is created with 'git branch' or 'git checkout' that tracks another branch, this variable tells git to set up pull to rebase instead of merge (see "branch.<name>.rebase"). When `never`, rebase is never automatically set to true. @@ -577,24 +598,24 @@ branch.autosetuprebase:: This option defaults to never. branch.<name>.remote:: - When in branch <name>, it tells 'git-fetch' and 'git-push' which + When in branch <name>, it tells 'git fetch' and 'git push' which remote to fetch from/push to. It defaults to `origin` if no remote is configured. `origin` is also used if you are not on any branch. branch.<name>.merge:: Defines, together with branch.<name>.remote, the upstream branch - for the given branch. It tells 'git-fetch'/'git-pull' which - branch to merge and can also affect 'git-push' (see push.default). - When in branch <name>, it tells 'git-fetch' the default + for the given branch. It tells 'git fetch'/'git pull' which + branch to merge and can also affect 'git push' (see push.default). + When in branch <name>, it tells 'git fetch' the default refspec to be marked for merging in FETCH_HEAD. The value is handled like the remote part of a refspec, and must match a ref which is fetched from the remote given by "branch.<name>.remote". - The merge information is used by 'git-pull' (which at first calls - 'git-fetch') to lookup the default branch for merging. Without - this option, 'git-pull' defaults to merge the first refspec fetched. + The merge information is used by 'git pull' (which at first calls + 'git fetch') to lookup the default branch for merging. Without + this option, 'git pull' defaults to merge the first refspec fetched. Specify multiple values to get an octopus merge. - If you wish to setup 'git-pull' so that it merges into <name> from + If you wish to setup 'git pull' so that it merges into <name> from another branch in the local repository, you can point branch.<name>.merge to the desired branch, and use the special setting `.` (a period) for branch.<name>.remote. @@ -666,19 +687,9 @@ color.grep:: `never`), never. When set to `true` or `auto`, use color only when the output is written to the terminal. Defaults to `false`. -color.grep.external:: - The string value of this variable is passed to an external 'grep' - command as a command line option if match highlighting is turned - on. If set to an empty string, no option is passed at all, - turning off coloring for external 'grep' calls; this is the default. - For GNU grep, set it to `--color=always` to highlight matches even - when a pager is used. - color.grep.match:: Use customized color for matches. The value of this variable - may be specified as in color.branch.<slot>. It is passed using - the environment variables 'GREP_COLOR' and 'GREP_COLORS' when - calling an external 'grep'. + may be specified as in color.branch.<slot>. color.interactive:: When set to `always`, always use colors for interactive prompts @@ -687,7 +698,7 @@ color.interactive:: colors only when the output is to the terminal. Defaults to false. color.interactive.<slot>:: - Use customized color for 'git-add --interactive' + Use customized color for 'git add --interactive' output. `<slot>` may be `prompt`, `header`, `help` or `error`, for four distinct types of normal output from interactive commands. The values of these variables may be specified as @@ -726,20 +737,25 @@ color.ui:: terminal. When more specific variables of color.* are set, they always take precedence over this setting. Defaults to false. +commit.status:: + A boolean to enable/disable inclusion of status information in the + commit message template when using an editor to prepare the commit + message. Defaults to true. + commit.template:: Specify a file to use as the template for new commit messages. "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the specified user's home directory. diff.autorefreshindex:: - When using 'git-diff' to compare with work tree + When using 'git diff' to compare with work tree files, do not consider stat-only change as changed. Instead, silently run `git update-index --refresh` to update the cached stat information for paths whose contents in the work tree match the contents in the index. This option defaults to true. Note that this - affects only 'git-diff' Porcelain, and not lower level - 'diff' commands such as 'git-diff-files'. + affects only 'git diff' Porcelain, and not lower level + 'diff' commands such as 'git diff-files'. diff.external:: If this config variable is set, diff generation is not @@ -751,24 +767,24 @@ diff.external:: your files, you might want to use linkgit:gitattributes[5] instead. diff.mnemonicprefix:: - If set, 'git-diff' uses a prefix pair that is different from the + If set, 'git diff' uses a prefix pair that is different from the standard "a/" and "b/" depending on what is being compared. When this configuration is in effect, reverse diff output also swaps the order of the prefixes: -'git-diff';; +`git diff`;; compares the (i)ndex and the (w)ork tree; -'git-diff HEAD';; +`git diff HEAD`;; compares a (c)ommit and the (w)ork tree; -'git diff --cached';; +`git diff --cached`;; compares a (c)ommit and the (i)ndex; -'git-diff HEAD:file1 file2';; +`git diff HEAD:file1 file2`;; compares an (o)bject and a (w)ork tree entity; -'git diff --no-index a b';; +`git diff --no-index a b`;; compares two non-git things (1) and (2). diff.renameLimit:: The number of files to consider when performing the copy/rename - detection; equivalent to the 'git-diff' option '-l'. + detection; equivalent to the 'git diff' option '-l'. diff.renames:: Tells git to detect renames. If set to any boolean value, it @@ -854,7 +870,7 @@ format.pretty:: linkgit:git-whatchanged[1]. format.thread:: - The default threading style for 'git-format-patch'. Can be + The default threading style for 'git format-patch'. Can be a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the @@ -872,8 +888,8 @@ format.signoff:: gc.aggressiveWindow:: The window size parameter used in the delta compression - algorithm used by 'git-gc --aggressive'. This defaults - to 10. + algorithm used by 'git gc --aggressive'. This defaults + to 250. gc.auto:: When there are approximately more than this many loose @@ -892,33 +908,33 @@ gc.packrefs:: Running `git pack-refs` in a repository renders it unclonable by Git versions prior to 1.5.1.2 over dumb transports such as HTTP. This variable determines whether - 'git gc' runs `git pack-refs`. This can be set to "nobare" + 'git gc' runs `git pack-refs`. This can be set to `nobare` to enable it within all non-bare repos or it can be set to a boolean value. The default is `true`. gc.pruneexpire:: - When 'git-gc' is run, it will call 'prune --expire 2.weeks.ago'. + When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'. Override the grace period with this config variable. The value "now" may be used to disable this grace period and always prune unreachable objects immediately. gc.reflogexpire:: - 'git-reflog expire' removes reflog entries older than + 'git reflog expire' removes reflog entries older than this time; defaults to 90 days. gc.reflogexpireunreachable:: - 'git-reflog expire' removes reflog entries older than + 'git reflog expire' removes reflog entries older than this time and are not reachable from the current tip; defaults to 30 days. gc.rerereresolved:: Records of conflicted merge you resolved earlier are - kept for this many days when 'git-rerere gc' is run. + kept for this many days when 'git rerere gc' is run. The default is 60 days. See linkgit:git-rerere[1]. gc.rerereunresolved:: Records of conflicted merge you have not resolved are - kept for this many days when 'git-rerere gc' is run. + kept for this many days when 'git rerere gc' is run. The default is 15 days. See linkgit:git-rerere[1]. gitcvs.commitmsgannotation:: @@ -1026,7 +1042,7 @@ gui.spellingdictionary:: off. gui.fastcopyblame:: - If true, 'git gui blame' uses '-C' instead of '-C -C' for original + If true, 'git gui blame' uses `-C` instead of `-C -C` for original location detection. It makes blame significantly faster on huge repositories at the expense of less thorough copy detection. @@ -1150,6 +1166,12 @@ http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. +http.minSessions:: + The number of curl sessions (counted across slots) to be kept across + requests. They will not be ended with curl_easy_cleanup() until + http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this + value will be capped at 1. Defaults to 1. + http.postBuffer:: Maximum size in bytes of the buffer used by smart HTTP transports when POSTing data to the remote system. @@ -1179,7 +1201,7 @@ i18n.commitEncoding:: i18n.logOutputEncoding:: Character encoding the commit messages are converted to when - running 'git-log' and friends. + running 'git log' and friends. imap:: The configuration variables in the 'imap' section are described @@ -1213,7 +1235,7 @@ interactive.singlekey:: log.date:: Set default date-time mode for the log command. Setting log.date - value is similar to using 'git-log'\'s --date option. The value is one of the + value is similar to using 'git log'\'s --date option. The value is one of the following alternatives: {relative,local,default,iso,rfc,short}. See linkgit:git-log[1]. @@ -1353,10 +1375,13 @@ you can use linkgit:git-index-pack[1] on the *.pack file to regenerate the `{asterisk}.idx` file. pack.packSizeLimit:: - The default maximum size of a pack. This setting only affects - packing to a file, i.e. the git:// protocol is unaffected. It - can be overridden by the `\--max-pack-size` option of - linkgit:git-repack[1]. + The maximum size of a pack. This setting only affects + packing to a file when repacking, i.e. the git:// protocol + is unaffected. It can be overridden by the `\--max-pack-size` + option of linkgit:git-repack[1]. The minimum size allowed is + limited to 1 MiB. The default is unlimited. + Common unit suffixes of 'k', 'm', or 'g' are + supported. pager.<cmd>:: Allows turning on or off pagination of the output of a @@ -1421,7 +1446,7 @@ receive.denyCurrentBranch:: out of sync with the index and working tree. If set to "warn", print a warning of such a push to stderr, but allow the push to proceed. If set to false or "ignore", allow such pushes with no - message. Defaults to "warn". + message. Defaults to "refuse". receive.denyNonFastForwards:: If set to true, git-receive-pack will deny a ref update which is @@ -1479,6 +1504,10 @@ remote.<name>.tagopt:: Setting this value to \--no-tags disables automatic tag following when fetching from remote <name> +remote.<name>.vcs:: + Setting this to a value <vcs> will cause git to interact with + the remote with the git-remote-<vcs> helper. + remotes.<group>:: The list of remotes which are fetched by "git remote update <group>". See linkgit:git-remote[1]. @@ -1576,6 +1605,13 @@ If this variable is not specified, it defaults to 'normal'. This variable can be overridden with the -u|--untracked-files option of linkgit:git-status[1] and linkgit:git-commit[1]. +status.submodulesummary:: + Defaults to false. + If this is set to a non zero number or true (identical to -1 or an + unlimited number), the submodule summary will be enabled and a + summary of commits for modified submodules will be shown (see + --summary-limit option of linkgit:git-submodule[1]). + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/date-formats.txt b/Documentation/date-formats.txt new file mode 100644 index 0000000000..c000f08a9d --- /dev/null +++ b/Documentation/date-formats.txt @@ -0,0 +1,26 @@ +DATE FORMATS +------------ + +The GIT_AUTHOR_DATE, GIT_COMMITTER_DATE environment variables +ifdef::git-commit[] +and the `--date` option +endif::git-commit[] +support the following date formats: + +Git internal format:: + It is `<unix timestamp> <timezone offset>`, where `<unix + timestamp>` is the number of seconds since the UNIX epoch. + `<timezone offset>` is a positive or negative offset from UTC. + For example CET (which is 2 hours ahead UTC) is `+0200`. + +RFC 2822:: + The standard email format as described by RFC 2822, for example + `Thu, 07 Apr 2005 22:13:13 +0200`. + +ISO 8601:: + Time and date specified by the ISO 8601 standard, for example + `2005-04-07T22:13:13`. The parser accepts a space instead of the + `T` character as well. ++ +NOTE: In addition, the date part is accepted in the following formats: +`YYYY.MM.DD`, `MM/DD/YYYY` and `DD.MM.YYYY`. diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index b71712473e..15c7e794f4 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -19,7 +19,7 @@ git-diff-tree [-r] <tree-ish-1> <tree-ish-2> [<pattern>...]:: git-diff-files [<pattern>...]:: compares the index and the files on the filesystem. -The "git-diff-tree" command begins its ouput by printing the hash of +The "git-diff-tree" command begins its output by printing the hash of what is being compared. After that, all the commands print one output line per changed file. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 8707d0e740..a1191d647b 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -94,8 +94,8 @@ Also, when `--raw` or `--numstat` has been given, do not munge pathnames and use NULs as output field terminators. endif::git-log[] ifndef::git-log[] - When `--raw` or `--numstat` has been given, do not munge - pathnames and use NULs as output field terminators. + When `--raw`, `--numstat`, `--name-only` or `--name-status` has been + given, do not munge pathnames and use NULs as output field terminators. endif::git-log[] + Without this option, each pathname output will have TAB, LF, double quotes, diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index ab6419fe6e..fe716b2e42 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -19,7 +19,7 @@ endif::git-pull[] -f:: --force:: - When 'git-fetch' is used with `<rbranch>:<lbranch>` + When 'git fetch' is used with `<rbranch>:<lbranch>` refspec, it refuses to update the local branch `<lbranch>` unless the remote branch `<rbranch>` it fetches is a descendant of `<lbranch>`. This option @@ -61,16 +61,16 @@ endif::git-pull[] -u:: --update-head-ok:: - By default 'git-fetch' refuses to update the head which + By default 'git fetch' refuses to update the head which corresponds to the current branch. This flag disables the - check. This is purely for the internal use for 'git-pull' - to communicate with 'git-fetch', and unless you are + check. This is purely for the internal use for 'git pull' + to communicate with 'git fetch', and unless you are implementing your own Porcelain you are not supposed to use it. --upload-pack <upload-pack>:: When given, and the repository to fetch from is handled - by 'git-fetch-pack', '--exec=<upload-pack>' is passed to + by 'git fetch-pack', '--exec=<upload-pack>' is passed to the command to specify non-default path for the command run on the other end. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index d0b279b829..51cbeb7032 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -39,7 +39,7 @@ The `git add` command will not add ignored files by default. If any ignored files were explicitly specified on the command line, `git add` will fail with a list of ignored files. Ignored files reached by directory recursion or filename globbing performed by Git (quote your -globs before the shell) will be silently ignored. The `add` command can +globs before the shell) will be silently ignored. The 'git add' command can be used to add ignored files with the `-f` (force) option. Please see linkgit:git-commit[1] for alternative ways to add content to a diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 40178be922..23864df8da 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -15,7 +15,7 @@ SYNOPSIS [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] [--reject] [-q | --quiet] [--scissors | --no-scissors] [<mbox> | <Maildir>...] -'git am' (--skip | --resolved | --abort) +'git am' (--continue | --skip | --abort) DESCRIPTION ----------- @@ -37,7 +37,7 @@ OPTIONS -k:: --keep:: - Pass `-k` flag to 'git-mailinfo' (see linkgit:git-mailinfo[1]). + Pass `-k` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). -c:: --scissors:: @@ -53,7 +53,7 @@ OPTIONS -u:: --utf8:: - Pass `-u` flag to 'git-mailinfo' (see linkgit:git-mailinfo[1]). + Pass `-u` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). The proposed commit log message taken from the e-mail is re-coded into UTF-8 encoding (configuration variable `i18n.commitencoding` can be used to specify project's @@ -63,7 +63,7 @@ This was optional in prior versions of git, but now it is the default. You can use `--no-utf8` to override this. --no-utf8:: - Pass `-n` flag to 'git-mailinfo' (see + Pass `-n` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). -3:: @@ -81,7 +81,7 @@ default. You can use `--no-utf8` to override this. -p<n>:: --directory=<dir>:: --reject:: - These flags are passed to the 'git-apply' (see linkgit:git-apply[1]) + These flags are passed to the 'git apply' (see linkgit:git-apply[1]) program that applies the patch. @@ -107,6 +107,7 @@ default. You can use `--no-utf8` to override this. Skip the current patch. This is only meaningful when restarting an aborted patch. +--continue:: -r:: --resolved:: After a patch failure (e.g. attempting to apply @@ -121,7 +122,7 @@ default. You can use `--no-utf8` to override this. to the screen before exiting. This overrides the standard message informing you to use `--resolved` or `--skip` to handle the failure. This is solely - for internal use between 'git-rebase' and 'git-am'. + for internal use between 'git rebase' and 'git am'. --abort:: Restore the original branch and abort the patching operation. diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index c2528a7654..8463439ac5 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -69,7 +69,7 @@ OPTIONS without using the working tree. This implies `--index`. --build-fake-ancestor=<file>:: - Newer 'git-diff' output has embedded 'index information' + Newer 'git diff' output has embedded 'index information' for each blob to help identify the original version that the patch applies to. When this flag is given, and if the original versions of the blobs are available locally, @@ -83,7 +83,7 @@ the information is read from the current index instead. Apply the patch in reverse. --reject:: - For atomicity, 'git-apply' by default fails the whole patch and + For atomicity, 'git apply' by default fails the whole patch and does not touch the working tree when some of the hunks do not apply. This option makes it apply the parts of the patch that are applicable, and leave the @@ -109,7 +109,7 @@ any of those replacements occurred. ever ignored. --unidiff-zero:: - By default, 'git-apply' expects that the patch being + By default, 'git apply' expects that the patch being applied is a unified diff with at least one line of context. This provides good safety measures, but breaks down when applying a diff generated with `--unified=0`. To bypass these @@ -120,7 +120,7 @@ discouraged. --apply:: If you use any of the options marked "Turns off - 'apply'" above, 'git-apply' reads and outputs the + 'apply'" above, 'git apply' reads and outputs the requested information without actually applying the patch. Give this flag after those flags to also apply the patch. @@ -229,7 +229,7 @@ apply.whitespace:: Submodules ---------- -If the patch contains any changes to submodules then 'git-apply' +If the patch contains any changes to submodules then 'git apply' treats these changes as follows. If `--index` is specified (explicitly or implicitly), then the submodule diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt index c7a6e3ec05..4d4325f222 100644 --- a/Documentation/git-archimport.txt +++ b/Documentation/git-archimport.txt @@ -29,17 +29,17 @@ branches that have different roots, it will refuse to run. In that case, edit your <archive/branch> parameters to define clearly the scope of the import. -'git-archimport' uses `tla` extensively in the background to access the +'git archimport' uses `tla` extensively in the background to access the Arch repository. Make sure you have a recent version of `tla` available in the path. `tla` must -know about the repositories you pass to 'git-archimport'. +know about the repositories you pass to 'git archimport'. -For the initial import, 'git-archimport' expects to find itself in an empty +For the initial import, 'git archimport' expects to find itself in an empty directory. To follow the development of a project that uses Arch, rerun -'git-archimport' with the same parameters as the initial import to perform +'git archimport' with the same parameters as the initial import to perform incremental imports. -While 'git-archimport' will try to create sensible branch names for the +While 'git archimport' will try to create sensible branch names for the archives that it imports, it is also possible to specify git branch names manually. To do so, write a git branch name after each <archive/branch> parameter, separated by a colon. This way, you can shorten the Arch @@ -84,7 +84,7 @@ OPTIONS -o:: Use this for compatibility with old-style branch names used by - earlier versions of 'git-archimport'. Old-style branch names + earlier versions of 'git archimport'. Old-style branch names were category--branch, whereas new-style branch names are archive,category--branch--version. In both cases, names given on the command-line will override the automatically-generated diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index e57979198b..8d3e66626f 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -21,13 +21,13 @@ structure for the named tree, and writes it out to the standard output. If <prefix> is specified it is prepended to the filenames in the archive. -'git-archive' behaves differently when given a tree ID versus when +'git archive' behaves differently when given a tree ID versus when given a commit ID or tag ID. In the first case the current time is used as the modification time of each file in the archive. In the latter case the commit time as recorded in the referenced commit object is used instead. Additionally the commit ID is stored in a global extended pax header if the tar format is used; it can be extracted -using 'git-get-tar-commit-id'. In ZIP files it is stored as a file +using 'git get-tar-commit-id'. In ZIP files it is stored as a file comment. OPTIONS @@ -112,6 +112,14 @@ export-subst:: expand several placeholders when adding this file to an archive. See linkgit:gitattributes[5] for details. +Note that attributes are by default taken from the `.gitattributes` files +in the tree that is being archived. If you want to tweak the way the +output is generated after the fact (e.g. you committed without adding an +appropriate export-ignore in its `.gitattributes`), adjust the checked out +`.gitattributes` file as necessary and use `--work-tree-attributes` +option. Alternatively you can keep necessary attributes that should apply +while archiving any tree in your `$GIT_DIR/info/attributes` file. + EXAMPLES -------- git archive --format=tar --prefix=junk/ HEAD | (cd /var/tmp/ && tar xf -):: diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index 6b7b2e5497..86b3015c13 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -799,7 +799,7 @@ fixed in the "main" branch by commit "F"? The result of such a bisection would be that we would find that H is the first bad commit, when in fact it's B. So that would be wrong! -And yes it's can happen in practice that people working on one branch +And yes it can happen in practice that people working on one branch are not aware that people working on another branch fixed a bug! It could also happen that F fixed more than one bug or that it is a revert of some big development effort that was not ready to be diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index b786471dd8..a27f43950f 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -21,7 +21,7 @@ last modified the line. Optionally, start annotating from the given revision. The command can also limit the range of lines annotated. The report does not tell you anything about lines which have been deleted or -replaced; you need to use a tool such as 'git-diff' or the "pickaxe" +replaced; you need to use a tool such as 'git diff' or the "pickaxe" interface briefly mentioned in the following paragraph. Apart from supporting file annotation, git also supports searching the @@ -49,7 +49,7 @@ include::blame-options.txt[] file (see `-M`). The first number listed is the score. This is the number of alphanumeric characters detected as having been moved between or within files. This must be above - a certain threshold for 'git-blame' to consider those lines + a certain threshold for 'git blame' to consider those lines of code to have been moved. -f:: @@ -100,7 +100,7 @@ header elements later. SPECIFYING RANGES ----------------- -Unlike 'git-blame' and 'git-annotate' in older versions of git, the extent +Unlike 'git blame' and 'git annotate' in older versions of git, the extent of the annotation can be limited to both line ranges and revision ranges. When you are interested in finding the origin for lines 40-60 for file `foo`, you can use the `-L` option like so @@ -118,7 +118,7 @@ which limits the annotation to the body of the `hello` subroutine. When you are not interested in changes older than version v2.6.18, or changes older than 3 weeks, you can use revision -range specifiers similar to 'git-rev-list': +range specifiers similar to 'git rev-list': git blame v2.6.18.. -- foo git blame --since=3.weeks -- foo diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 0e836809c2..60fa684b1d 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -11,7 +11,7 @@ SYNOPSIS 'git branch' [--color | --no-color] [-r | -a] [-v [--abbrev=<length> | --no-abbrev]] [(--merged | --no-merged | --contains) [<commit>]] -'git branch' [--track | --no-track] [-l] [-f] <branchname> [<start-point>] +'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> 'git branch' (-d | -D) [-r] <branchname>... @@ -38,7 +38,7 @@ working tree to it; use "git checkout <newbranch>" to switch to the new branch. When a local branch is started off a remote branch, git sets up the -branch so that 'git-pull' will appropriately merge from +branch so that 'git pull' will appropriately merge from the remote branch. This behavior may be changed via the global `branch.autosetupmerge` configuration flag. That setting can be overridden by using the `--track` and `--no-track` options. @@ -55,7 +55,7 @@ has a reflog then the reflog will also be deleted. Use -r together with -d to delete remote-tracking branches. Note, that it only makes sense to delete remote-tracking branches if they no longer exist -in the remote repository or if 'git-fetch' was configured not to fetch +in the remote repository or if 'git fetch' was configured not to fetch them again. See also the 'prune' subcommand of linkgit:git-remote[1] for a way to clean up all obsolete remote-tracking branches. @@ -63,7 +63,9 @@ way to clean up all obsolete remote-tracking branches. OPTIONS ------- -d:: - Delete a branch. The branch must be fully merged in HEAD. + Delete a branch. The branch must be fully merged in its + upstream branch, or in `HEAD` if no upstream was set with + `--track` or `--set-upstream`. -D:: Delete a branch irrespective of its merged status. @@ -72,11 +74,13 @@ OPTIONS Create the branch's reflog. This activates recording of all changes made to the branch ref, enabling use of date based sha1 expressions such as "<branchname>@\{yesterday}". + Note that in non-bare repositories, reflogs are usually + enabled by default by the `core.logallrefupdates` config option. -f:: --force:: Reset <branchname> to <startpoint> if <branchname> exists - already. Without `-f` 'git-branch' refuses to change an existing branch. + already. Without `-f` 'git branch' refuses to change an existing branch. -m:: Move/rename a branch and the corresponding reflog. @@ -129,6 +133,12 @@ start-point is either a local or remote branch. Do not set up "upstream" configuration, even if the branch.autosetupmerge configuration variable is true. +--set-upstream:: + If specified branch does not exist yet or if '--force' has been + given, acts exactly like '--track'. Otherwise sets up configuration + like '--track' would when creating the branch, except that where + branch points to is not changed. + --contains <commit>:: Only list branches which contain the specified commit. diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index c3a066e60c..a5ed8fb05b 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -21,9 +21,9 @@ Some workflows require that one or more branches of development on one machine be replicated on another machine, but the two machines cannot be directly connected, and therefore the interactive git protocols (git, ssh, rsync, http) cannot be used. This command provides support for -'git-fetch' and 'git-pull' to operate by packaging objects and references +'git fetch' and 'git pull' to operate by packaging objects and references in an archive at the originating machine, then importing those into -another repository using 'git-fetch' and 'git-pull' +another repository using 'git fetch' and 'git pull' after moving the archive by some means (e.g., by sneakernet). As no direct connection between the repositories exists, the user must specify a basis for the bundle that is held by the destination repository: the @@ -35,14 +35,14 @@ OPTIONS create <file>:: Used to create a bundle named 'file'. This requires the - 'git-rev-list' arguments to define the bundle contents. + 'git rev-list' arguments to define the bundle contents. verify <file>:: Used to check that a bundle file is valid and will apply cleanly to the current repository. This includes checks on the bundle format itself as well as checking that the prerequisite commits exist and are fully linked in the current repository. - 'git-bundle' prints a list of missing commits, if any, and exits + 'git bundle' prints a list of missing commits, if any, and exits with a non-zero status. list-heads <file>:: @@ -51,15 +51,15 @@ list-heads <file>:: printed out. unbundle <file>:: - Passes the objects in the bundle to 'git-index-pack' + Passes the objects in the bundle to 'git index-pack' for storage in the repository, then prints the names of all defined references. If a list of references is given, only references matching those in the list are printed. This command is - really plumbing, intended to be called only by 'git-fetch'. + really plumbing, intended to be called only by 'git fetch'. [git-rev-list-args...]:: - A list of arguments, acceptable to 'git-rev-parse' and - 'git-rev-list', that specifies the specific objects and references + A list of arguments, acceptable to 'git rev-parse' and + 'git rev-list', that specifies the specific objects and references to transport. For example, `master\~10..master` causes the current master reference to be packaged along with all objects added since its 10th ancestor commit. There is no explicit @@ -69,16 +69,16 @@ unbundle <file>:: [refname...]:: A list of references used to limit the references reported as - available. This is principally of use to 'git-fetch', which + available. This is principally of use to 'git fetch', which expects to receive only those references asked for and not - necessarily everything in the pack (in this case, 'git-bundle' acts - like 'git-fetch-pack'). + necessarily everything in the pack (in this case, 'git bundle' acts + like 'git fetch-pack'). SPECIFYING REFERENCES --------------------- -'git-bundle' will only package references that are shown by -'git-show-ref': this includes heads, tags, and remote heads. References +'git bundle' will only package references that are shown by +'git show-ref': this includes heads, tags, and remote heads. References such as `master\~1` cannot be packaged, but are perfectly suitable for defining the basis. More than one reference may be packaged, and more than one basis can be specified. The objects packaged are those not diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 7422185bf5..379eee6734 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -19,8 +19,9 @@ status if it is not. A reference is used in git to specify branches and tags. A branch head is stored under the `$GIT_DIR/refs/heads` directory, and -a tag is stored under the `$GIT_DIR/refs/tags` directory. git -imposes the following rules on how references are named: +a tag is stored under the `$GIT_DIR/refs/tags` directory (or, if refs +are packed by `git gc`, as entries in the `$GIT_DIR/packed-refs` file). +git imposes the following rules on how references are named: . They can include slash `/` for hierarchical (directory) grouping, but no slash-separated component can begin with a @@ -60,7 +61,7 @@ reference name expressions (see linkgit:git-rev-parse[1]): . A colon `:` is used as in `srcref:dstref` to mean "use srcref\'s value and store it in dstref" in fetch and push operations. It may also be used to select a specific object such as with - 'git-cat-file': "git cat-file blob v1.3.3:refs.c". + 'git cat-file': "git cat-file blob v1.3.3:refs.c". . at-open-brace `@{` is used as a notation to access a reflog entry. diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt index 62d84836b8..d6aa6e14eb 100644 --- a/Documentation/git-checkout-index.txt +++ b/Documentation/git-checkout-index.txt @@ -88,7 +88,7 @@ $ find . -name '*.h' -print0 | xargs -0 git checkout-index -f -- which will force all existing `*.h` files to be replaced with their cached copies. If an empty command line implied "all", then this would force-refresh everything in the index, which was not the point. But -since 'git-checkout-index' accepts --stdin it would be faster to use: +since 'git checkout-index' accepts --stdin it would be faster to use: ---------------- $ find . -name '*.h' -print0 | git checkout-index -f -z --stdin @@ -102,7 +102,7 @@ Using `--` is probably a good policy in scripts. Using --temp or --stage=all --------------------------- When `--temp` is used (or implied by `--stage=all`) -'git-checkout-index' will create a temporary file for each index +'git checkout-index' will create a temporary file for each index entry being checked out. The index will not be updated with stat information. These options can be useful if the caller needs all stages of all unmerged entries so that the unmerged files can be @@ -147,9 +147,9 @@ To update and refresh only the files already checked out:: $ git checkout-index -n -f -a && git update-index --ignore-missing --refresh ---------------- -Using 'git-checkout-index' to "export an entire tree":: +Using 'git checkout-index' to "export an entire tree":: The prefix ability basically makes it trivial to use - 'git-checkout-index' as an "export as tree" function. + 'git checkout-index' as an "export as tree" function. Just read the desired tree into the index, and do: + ---------------- diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index b764130d26..78f4714da0 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -24,7 +24,7 @@ OPTIONS -e:: --edit:: - With this option, 'git-cherry-pick' will let you edit the commit + With this option, 'git cherry-pick' will let you edit the commit message prior to committing. -x:: diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index 7deefdae8f..fed115acd0 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -14,7 +14,7 @@ DESCRIPTION The changeset (or "diff") of each commit between the fork-point and <head> is compared against each commit between the fork-point and <upstream>. The commits are compared with their 'patch id', obtained from -the 'git-patch-id' program. +the 'git patch-id' program. Every commit that doesn't exist in the <upstream> branch has its id (sha1) reported, prefixed by a symbol. The ones that have @@ -37,8 +37,8 @@ to and including <limit> are not reported: \__*__*__<limit>__-__+__> <head> -Because 'git-cherry' compares the changeset rather than the commit id -(sha1), you can use 'git-cherry' to find out if a commit you made locally +Because 'git cherry' compares the changeset rather than the commit id +(sha1), you can use 'git cherry' to find out if a commit you made locally has been applied <upstream> under a different commit id. For example, this will happen if you're feeding patches <upstream> via email rather than pushing or pulling commits directly. diff --git a/Documentation/git-citool.txt b/Documentation/git-citool.txt index 670cb02b6c..fb2753c97e 100644 --- a/Documentation/git-citool.txt +++ b/Documentation/git-citool.txt @@ -14,9 +14,9 @@ DESCRIPTION A Tcl/Tk based graphical interface to review modified files, stage them into the index, enter a commit message and record the new commit onto the current branch. This interface is an alternative -to the less interactive 'git-commit' program. +to the less interactive 'git commit' program. -'git-citool' is actually a standard alias for `git gui citool`. +'git citool' is actually a standard alias for `git gui citool`. See linkgit:git-gui[1] for more details. Author diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 9d291bdd26..a81cb6c280 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -33,8 +33,8 @@ OPTIONS -f:: --force:: - If the git configuration specifies clean.requireForce as true, - 'git-clean' will refuse to run unless given -f or -n. + If the git configuration variable clean.requireForce is not set + to false, 'git clean' will refuse to run unless given -f or -n. -n:: --dry-run:: @@ -48,7 +48,7 @@ OPTIONS -x:: Don't use the ignore rules. This allows removing all untracked files, including build products. This can be used (possibly in - conjunction with 'git-reset') to create a pristine + conjunction with 'git reset') to create a pristine working directory to test a clean build. -X:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index b49de66764..d15cb17d78 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -29,7 +29,7 @@ arguments will in addition merge the remote master branch into the current master branch, if any. This default configuration is achieved by creating references to -the remote branch heads under `$GIT_DIR/refs/remotes/origin` and +the remote branch heads under `refs/remotes/origin` and by initializing `remote.origin.url` and `remote.origin.fetch` configuration variables. @@ -96,13 +96,19 @@ objects from the source repository into a pack in the cloned repository. --quiet:: -q:: - Operate quietly. This flag is also passed to the `rsync' + Operate quietly. Progress is not reported to the standard + error stream. This flag is also passed to the `rsync' command when given. --verbose:: -v:: - Display the progress bar, even in case the standard output is not - a terminal. + Run verbosely. + +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. --no-checkout:: -n:: diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index b8834baced..61888547a1 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -70,9 +70,10 @@ is taken from the configuration items user.name and user.email, or, if not present, system user name and fully qualified hostname. A commit comment is read from stdin. If a changelog -entry is not provided via "<" redirection, 'git-commit-tree' will just wait +entry is not provided via "<" redirection, 'git commit-tree' will just wait for one to be entered and terminated with ^D. +include::date-formats.txt[] Diagnostics ----------- diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index d227cec9ba..64fb458b45 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -11,7 +11,8 @@ SYNOPSIS 'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run] [(-c | -C) <commit>] [-F <file> | -m <msg>] [--reset-author] [--allow-empty] [--no-verify] [-e] [--author=<author>] - [--cleanup=<mode>] [--] [[-i | -o ]<file>...] + [--date=<date>] [--cleanup=<mode>] [--status | --no-status] [--] + [[-i | -o ]<file>...] DESCRIPTION ----------- @@ -20,11 +21,11 @@ with a log message from the user describing the changes. The content to be added can be specified in several ways: -1. by using 'git-add' to incrementally "add" changes to the +1. by using 'git add' to incrementally "add" changes to the index before using the 'commit' command (Note: even modified files must be "added"); -2. by using 'git-rm' to remove files from the working tree +2. by using 'git rm' to remove files from the working tree and the index, again before using the 'commit' command; 3. by listing files as arguments to the 'commit' command, in which @@ -40,14 +41,14 @@ The content to be added can be specified in several ways: 5. by using the --interactive switch with the 'commit' command to decide one by one which files should be part of the commit, before finalizing the - operation. Currently, this is done by invoking 'git-add --interactive'. + operation. Currently, this is done by invoking 'git add --interactive'. The `--dry-run` option can be used to obtain a summary of what is included by any of the above for the next commit by giving the same set of parameters (options and paths). If you make a commit and then find a mistake immediately after -that, you can recover from it with 'git-reset'. +that, you can recover from it with 'git reset'. OPTIONS @@ -74,6 +75,20 @@ OPTIONS authorship of the resulting commit now belongs of the committer. This also renews the author timestamp. +--short:: + When doing a dry-run, give the output in the short-format. See + linkgit:git-status[1] for details. Implies `--dry-run`. + +--porcelain:: + When doing a dry-run, give the output in a porcelain-ready + format. See linkgit:git-status[1] for details. Implies + `--dry-run`. + +-z:: + When showing `short` or `porcelain` status output, terminate + entries in the status output with NUL, instead of LF. If no + format is given, implies the `--porcelain` output format. + -F <file>:: --file=<file>:: Take the commit message from the given file. Use '-' to @@ -85,6 +100,9 @@ OPTIONS an existing commit that matches the given string and its author name is used. +--date=<date>:: + Override the author date used in the commit. + -m <msg>:: --message=<msg>:: Use the given <msg> as the commit message. @@ -167,7 +185,7 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) Make a commit only from the paths specified on the command line, disregarding any contents that have been staged so far. This is the default mode of operation of - 'git-commit' if any paths are given on the command line, + 'git commit' if any paths are given on the command line, in which case this option can be omitted. If this option is specified together with '--amend', then no paths need to be specified, which can be used to amend @@ -179,13 +197,13 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) Show untracked files (Default: 'all'). + The mode parameter is optional, and is used to specify -the handling of untracked files. The possible options are: +the handling of untracked files. ++ +The possible options are: + --- - 'no' - Show no untracked files - 'normal' - Shows untracked files and directories - 'all' - Also shows individual files in untracked directories. --- + See linkgit:git-config[1] for configuration variable used to change the default for when the option is not @@ -207,6 +225,17 @@ specified. to be committed, paths with local changes that will be left uncommitted and paths that are untracked. +--status:: + Include the output of linkgit:git-status[1] in the commit + message template when using an editor to prepare the commit + message. Defaults to on, but can be used to override + configuration variable commit.status. + +--no-status:: + Do not include the output of linkgit:git-status[1] in the + commit message template when using an editor to prepare the + default commit message. + \--:: Do not interpret any more arguments as options. @@ -217,15 +246,17 @@ specified. these files are also staged for the next commit on top of what have been staged before. +:git-commit: 1 +include::date-formats.txt[] EXAMPLES -------- When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area -called the "index" with 'git-add'. A file can be +called the "index" with 'git add'. A file can be reverted back, only in the index but not in the working tree, to that of the last commit with `git reset HEAD -- <file>`, -which effectively reverts 'git-add' and prevents the changes to +which effectively reverts 'git add' and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, `git commit` (without any pathname parameter) is used to record what @@ -281,13 +312,13 @@ $ git commit this second commit would record the changes to `hello.c` and `hello.h` as expected. -After a merge (initiated by 'git-merge' or 'git-pull') stops +After a merge (initiated by 'git merge' or 'git pull') stops because of conflicts, cleanly merged paths are already staged to be committed for you, and paths that conflicted are left in unmerged state. You would have to first -check which paths are conflicting with 'git-status' +check which paths are conflicting with 'git status' and after fixing them manually in your working tree, you would -stage the result as usual with 'git-add': +stage the result as usual with 'git add': ------------ $ git status | grep unmerged diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index f68b198205..543dd64a46 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -37,11 +37,12 @@ existing values that match the regexp are updated or unset. If you want to handle the lines that do *not* match the regex, just prepend a single exclamation mark in front (see also <<EXAMPLES>>). -The type specifier can be either '--int' or '--bool', which will make -'git-config' ensure that the variable(s) are of the given type and +The type specifier can be either '--int' or '--bool', to make +'git config' ensure that the variable(s) are of the given type and convert the value to the canonical form (simple decimal number for int, -a "true" or "false" string for bool). If no type specifier is passed, -no checks or transformations are performed on the value. +a "true" or "false" string for bool), or '--path', which does some +path expansion (see '--path' below). If no type specifier is passed, no +checks or transformations are performed on the value. The file-option can be one of '--system', '--global' or '--file' which specify where the values will be read from or written to. @@ -124,18 +125,25 @@ See also <<FILES>>. List all variables set in config file. --bool:: - 'git-config' will ensure that the output is "true" or "false" + 'git config' will ensure that the output is "true" or "false" --int:: - 'git-config' will ensure that the output is a simple + 'git config' will ensure that the output is a simple decimal number. An optional value suffix of 'k', 'm', or 'g' in the config file will cause the value to be multiplied by 1024, 1048576, or 1073741824 prior to output. --bool-or-int:: - 'git-config' will ensure that the output matches the format of + 'git config' will ensure that the output matches the format of either --bool or --int, as described above. +--path:: + 'git-config' will expand leading '{tilde}' to the value of + '$HOME', and '{tilde}user' to the home directory for the + specified user. This option has no effect when setting the + value (but you can use 'git config bla {tilde}/' from the + command line to let your shell do the expansion). + -z:: --null:: For all options that output values and/or keys, always @@ -173,7 +181,7 @@ FILES ----- If not set explicitly with '--file', there are three files where -'git-config' will search for configuration options: +'git config' will search for configuration options: $GIT_DIR/config:: Repository specific configuration file. (The filename is @@ -190,12 +198,12 @@ $(prefix)/etc/gitconfig:: If no further options are given, all reading options will read all of these files that are available. If the global or the system-wide configuration file are not available they will be ignored. If the repository configuration -file is not available or readable, 'git-config' will exit with a non-zero +file is not available or readable, 'git config' will exit with a non-zero error code. However, in neither case will an error message be issued. All writing options will per default write to the repository specific configuration file. Note that this also affects options like '--replace-all' -and '--unset'. *'git-config' will only ever change one file at a time*. +and '--unset'. *'git config' will only ever change one file at a time*. You can override these rules either by command line options or by environment variables. The '--global' and the '--system' options will limit the file used diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt index abaaf273bb..b2696efae9 100644 --- a/Documentation/git-cvsexportcommit.txt +++ b/Documentation/git-cvsexportcommit.txt @@ -27,7 +27,7 @@ by default. Supports file additions, removals, and commits that affect binary files. -If the commit is a merge commit, you must tell 'git-cvsexportcommit' what +If the commit is a merge commit, you must tell 'git cvsexportcommit' what parent the changeset should be done against. OPTIONS diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 614e769f4e..ddfcb3d143 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -28,9 +28,9 @@ At least version 2.1 is required. Please see the section <<issues,ISSUES>> for further reference. You should *never* do any work of your own on the branches that are -created by 'git-cvsimport'. By default initial import will create and populate a +created by 'git cvsimport'. By default initial import will create and populate a "master" branch from the CVS repository's main branch which you're free -to work with; after that, you need to 'git-merge' incremental imports, or +to work with; after that, you need to 'git merge' incremental imports, or any CVS branches, yourself. It is advisable to specify a named remote via -r to separate and protect the incoming branches. @@ -49,13 +49,13 @@ OPTIONS -d <CVSROOT>:: The root of the CVS archive. May be local (a simple path) or remote; currently, only the :local:, :ext: and :pserver: access methods - are supported. If not given, 'git-cvsimport' will try to read it + are supported. If not given, 'git cvsimport' will try to read it from `CVS/Root`. If no such file exists, it checks for the `CVSROOT` environment variable. <CVS_module>:: The CVS module you want to import. Relative to <CVSROOT>. - If not given, 'git-cvsimport' tries to read it from + If not given, 'git cvsimport' tries to read it from `CVS/Repository`. -C <target-dir>:: @@ -65,14 +65,14 @@ OPTIONS -r <remote>:: The git remote to import this CVS repository into. Moves all CVS branches into remotes/<remote>/<branch> - akin to the way 'git-clone' uses 'origin' by default. + akin to the way 'git clone' uses 'origin' by default. -o <branch-for-HEAD>:: When no remote is specified (via -r) the 'HEAD' branch from CVS is imported to the 'origin' branch within the git repository, as 'HEAD' already has a special meaning for git. When a remote is specified the 'HEAD' branch is named - remotes/<remote>/master mirroring 'git-clone' behaviour. + remotes/<remote>/master mirroring 'git clone' behaviour. Use this option if you want to import into a different branch. + @@ -145,17 +145,17 @@ This option can be used several times to provide several detection regexes. --------- + -'git-cvsimport' will make it appear as those authors had +'git cvsimport' will make it appear as those authors had their GIT_AUTHOR_NAME and GIT_AUTHOR_EMAIL set properly all along. + For convenience, this data is saved to `$GIT_DIR/cvs-authors` each time the '-A' option is provided and read from that same -file each time 'git-cvsimport' is run. +file each time 'git cvsimport' is run. + It is not recommended to use this feature if you intend to export changes back to CVS again later with -'git-cvsexportcommit'. +'git cvsexportcommit'. -h:: Print a short usage message and exit. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 99a7c14700..dbb053ee17 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -22,7 +22,7 @@ cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver Usage: [verse] -'git cvsserver' [options] [pserver|server] [<directory> ...] +'git-cvsserver' [options] [pserver|server] [<directory> ...] OPTIONS ------- @@ -206,7 +206,7 @@ them write access to the directory, too. The database can not be reliably regenerated in a consistent form after the branch it is tracking has changed. Example: For merged branches, 'git-cvsserver' only tracks -one branch of development, and after a 'git-merge' an +one branch of development, and after a 'git merge' an incrementally updated database may track a different branch than a database regenerated from scratch, causing inconsistent CVS revision numbers. `git-cvsserver` has no way of knowing which @@ -277,6 +277,21 @@ In `dbdriver` and `dbuser` you can use the following variables: If no name can be determined, the numeric uid is used. +ENVIRONMENT +----------- + +These variables obviate the need for command-line options in some +circumstances, allowing easier restricted usage through git-shell. + +GIT_CVSSERVER_BASE_PATH takes the place of the argument to --base-path. + +GIT_CVSSERVER_ROOT specifies a single-directory whitelist. The +repository must still be configured to allow access through +git-cvsserver, as described above. + +When these environment variables are set, the corresponding +command-line arguments may not be used. + Eclipse CVS Client Notes ------------------------ @@ -294,7 +309,7 @@ To get a checkout with the Eclipse CVS client: Protocol notes: If you are using anonymous access via pserver, just select that. Those using SSH access should choose the 'ext' protocol, and configure 'ext' access on the Preferences->Team->CVS->ExtConnection pane. Set CVS_SERVER to -"'git cvsserver'". Note that password support is not good when using 'ext', +"`git cvsserver`". Note that password support is not good when using 'ext', you will definitely want to have SSH keys setup. Alternatively, you can just use the non-standard extssh protocol that Eclipse diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index a85121c689..01c9f8eb9e 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -28,36 +28,36 @@ that service if it is enabled. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any git directory that hasn't explicitly been marked for export this way (unless the '--export-all' parameter is specified). If you -pass some directory paths as 'git-daemon' arguments, you can further restrict +pass some directory paths as 'git daemon' arguments, you can further restrict the offers to a whitelist comprising of those. By default, only `upload-pack` service is enabled, which serves -'git-fetch-pack' and 'git-ls-remote' clients, which are invoked -from 'git-fetch', 'git-pull', and 'git-clone'. +'git fetch-pack' and 'git ls-remote' clients, which are invoked +from 'git fetch', 'git pull', and 'git clone'. This is ideally suited for read-only updates, i.e., pulling from git repositories. -An `upload-archive` also exists to serve 'git-archive'. +An `upload-archive` also exists to serve 'git archive'. OPTIONS ------- --strict-paths:: Match paths exactly (i.e. don't allow "/foo/repo" when the real path is "/foo/repo.git" or "/foo/repo/.git") and don't do user-relative paths. - 'git-daemon' will refuse to start when this option is enabled and no + 'git daemon' will refuse to start when this option is enabled and no whitelist is specified. --base-path=path:: Remap all the path requests as relative to the given path. - This is sort of "GIT root" - if you run 'git-daemon' with + This is sort of "GIT root" - if you run 'git daemon' with '--base-path=/srv/git' on example.com, then if you later try to pull - 'git://example.com/hello.git', 'git-daemon' will interpret the path + 'git://example.com/hello.git', 'git daemon' will interpret the path as '/srv/git/hello.git'. --base-path-relaxed:: If --base-path is enabled and repo lookup fails, with this option - 'git-daemon' will attempt to lookup without prefixing the base path. + 'git daemon' will attempt to lookup without prefixing the base path. This is useful for switching to --base-path usage, while still allowing the old paths. @@ -143,7 +143,7 @@ OPTIONS + Giving these options is an error when used with `--inetd`; use the facility of inet daemon to achieve the same before spawning -'git-daemon' if needed. +'git daemon' if needed. --enable=service:: --disable=service:: @@ -169,24 +169,24 @@ SERVICES These services can be globally enabled/disabled using the command line options of this command. If a finer-grained -control is desired (e.g. to allow 'git-archive' to be run +control is desired (e.g. to allow 'git archive' to be run against only in a few selected repositories the daemon serves), the per-repository configuration file can be used to enable or disable them. upload-pack:: - This serves 'git-fetch-pack' and 'git-ls-remote' + This serves 'git fetch-pack' and 'git ls-remote' clients. It is enabled by default, but a repository can disable it by setting `daemon.uploadpack` configuration item to `false`. upload-archive:: - This serves 'git-archive --remote'. It is disabled by + This serves 'git archive --remote'. It is disabled by default, but a repository can enable it by setting `daemon.uploadarch` configuration item to `true`. receive-pack:: - This serves 'git-send-pack' clients, allowing anonymous + This serves 'git send-pack' clients, allowing anonymous push. It is disabled by default, as there is _no_ authentication in the protocol (in other words, anybody can push anything into the repository, including removal @@ -204,8 +204,8 @@ $ grep 9418 /etc/services git 9418/tcp # Git Version Control System ------------ -'git-daemon' as inetd server:: - To set up 'git-daemon' as an inetd service that handles any +'git daemon' as inetd server:: + To set up 'git daemon' as an inetd service that handles any repository under the whitelisted set of directories, /pub/foo and /pub/bar, place an entry like the following into /etc/inetd all on one line: @@ -217,8 +217,8 @@ git 9418/tcp # Git Version Control System ------------------------------------------------ -'git-daemon' as inetd server for virtual hosts:: - To set up 'git-daemon' as an inetd service that handles +'git daemon' as inetd server for virtual hosts:: + To set up 'git daemon' as an inetd service that handles repositories for different virtual hosts, `www.example.com` and `www.example.org`, place an entry like the following into `/etc/inetd` all on one line: @@ -240,8 +240,8 @@ clients, a symlink from `/software` into the appropriate default repository could be made as well. -'git-daemon' as regular daemon for virtual hosts:: - To set up 'git-daemon' as a regular, non-inetd service that +'git daemon' as regular daemon for virtual hosts:: + To set up 'git daemon' as a regular, non-inetd service that handles repositories for multiple virtual hosts based on their IP addresses, start the daemon like this: + @@ -258,7 +258,7 @@ Repositories can still be accessed by hostname though, assuming they correspond to these IP addresses. selectively enable/disable services per repository:: - To enable 'git-archive --remote' and disable 'git-fetch' against + To enable 'git archive --remote' and disable 'git fetch' against a repository, have the following in the configuration file in the repository (that is the file 'config' next to 'HEAD', 'refs' and 'objects'). @@ -272,7 +272,7 @@ selectively enable/disable services per repository:: ENVIRONMENT ----------- -'git-daemon' will set REMOTE_ADDR to the IP address of the client +'git daemon' will set REMOTE_ADDR to the IP address of the client that connected to it, if the IP address is available. REMOTE_ADDR will be available in the environment of hooks called when services are performed. diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index 78b9808aa3..7ef9d51577 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -105,8 +105,11 @@ The number of additional commits is the number of commits which would be displayed by "git log v1.0.4..parent". The hash suffix is "-g" + 7-char abbreviation for the tip commit of parent (which was `2414721b194453f058079d897d13c4e377f92dc6`). +The "g" prefix stands for "git" and is used to allow describing the version of +a software depending on the SCM the software is managed with. This is useful +in an environment where people may use different SCMs. -Doing a 'git-describe' on a tag-name will just show the tag name: +Doing a 'git describe' on a tag-name will just show the tag name: [torvalds@g5 git]$ git describe v1.0.4 v1.0.4 @@ -136,13 +139,13 @@ be sufficient to disambiguate these commits. SEARCH STRATEGY --------------- -For each committish supplied, 'git-describe' will first look for +For each committish supplied, 'git describe' will first look for a tag which tags exactly that commit. Annotated tags will always be preferred over lightweight tags, and tags with newer dates will always be preferred over tags with older dates. If an exact match is found, its name will be output and searching will stop. -If an exact match was not found, 'git-describe' will walk back +If an exact match was not found, 'git describe' will walk back through the commit history to locate an ancestor commit which has been tagged. The ancestor's tag will be output along with an abbreviation of the input committish's SHA1. diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt index 4ef03578eb..9cd8ccef37 100644 --- a/Documentation/git-diff-files.txt +++ b/Documentation/git-diff-files.txt @@ -15,7 +15,7 @@ DESCRIPTION Compares the files in the working tree and the index. When paths are specified, compares only those named paths. Otherwise all entries in the index are compared. The output format is the -same as for 'git-diff-index' and 'git-diff-tree'. +same as for 'git diff-index' and 'git diff-tree'. OPTIONS ------- diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index 8b9ed29299..162cb741b3 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -31,7 +31,7 @@ include::diff-options.txt[] -m:: By default, files recorded in the index but not checked out are reported as deleted. This flag makes - 'git-diff-index' say that all non-checked-out files are up + 'git diff-index' say that all non-checked-out files are up to date. include::diff-format.txt[] @@ -48,7 +48,7 @@ Cached Mode If '--cached' is specified, it allows you to ask: show me the differences between HEAD and the current index - contents (the ones I'd write using 'git-write-tree') + contents (the ones I'd write using 'git write-tree') For example, let's say that you have worked on your working directory, updated some files in the index and are ready to commit. You want to see exactly @@ -60,7 +60,7 @@ object and compare it that way, and to do that, you just do Example: let's say I had renamed `commit.c` to `git-commit.c`, and I had done an `update-index` to make that effective in the index file. `git diff-files` wouldn't show anything at all, since the index file -matches my working directory. But doing a 'git-diff-index' does: +matches my working directory. But doing a 'git diff-index' does: torvalds@ppc970:~/git> git diff-index --cached HEAD -100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74 commit.c @@ -69,10 +69,10 @@ matches my working directory. But doing a 'git-diff-index' does: You can see easily that the above is a rename. In fact, `git diff-index --cached` *should* always be entirely equivalent to -actually doing a 'git-write-tree' and comparing that. Except this one is much +actually doing a 'git write-tree' and comparing that. Except this one is much nicer for the case where you just want to check where you are. -So doing a 'git-diff-index --cached' is basically very useful when you are +So doing a `git diff-index --cached` is basically very useful when you are asking yourself "what have I already marked for being committed, and what's the difference to a previous tree". @@ -80,20 +80,20 @@ Non-cached Mode --------------- The "non-cached" mode takes a different approach, and is potentially the more useful of the two in that what it does can't be emulated with -a 'git-write-tree' + 'git-diff-tree'. Thus that's the default mode. +a 'git write-tree' + 'git diff-tree'. Thus that's the default mode. The non-cached version asks the question: show me the differences between HEAD and the currently checked out tree - index contents _and_ files that aren't up-to-date which is obviously a very useful question too, since that tells you what -you *could* commit. Again, the output matches the 'git-diff-tree -r' +you *could* commit. Again, the output matches the 'git diff-tree -r' output to a tee, but with a twist. The twist is that if some file doesn't match the index, we don't have a backing store thing for it, and we use the magic "all-zero" sha1 to show that. So let's say that you have edited `kernel/sched.c`, but -have not actually done a 'git-update-index' on it yet - there is no +have not actually done a 'git update-index' on it yet - there is no "object" associated with the new state, and you get: torvalds@ppc970:~/v2.6/linux> git diff-index HEAD @@ -104,11 +104,11 @@ not up-to-date and may contain new stuff. The all-zero sha1 means that to get the real diff, you need to look at the object in the working directory directly rather than do an object-to-object diff. -NOTE: As with other commands of this type, 'git-diff-index' does not +NOTE: As with other commands of this type, 'git diff-index' does not actually look at the contents of the file at all. So maybe `kernel/sched.c` hasn't actually changed, and it's just that you touched it. In either case, it's a note that you need to -'git-update-index' it to make the index be in sync. +'git update-index' it to make the index be in sync. NOTE: You can have a mixture of files show up as "has been updated" and "is still dirty in the working directory" together. You can always diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index f2cef1260b..a7e37b875f 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -20,7 +20,7 @@ Compares the content and mode of the blobs found via two tree objects. If there is only one <tree-ish> given, the commit is compared with its parents (see --stdin below). -Note that 'git-diff-tree' can use the tree encapsulated in a commit object. +Note that 'git diff-tree' can use the tree encapsulated in a commit object. OPTIONS ------- @@ -67,25 +67,25 @@ The following flags further affect the behavior when comparing commits (but not trees). -m:: - By default, 'git-diff-tree --stdin' does not show + By default, 'git diff-tree --stdin' does not show differences for merge commits. With this flag, it shows differences to that commit from all of its parents. See also '-c'. -s:: - By default, 'git-diff-tree --stdin' shows differences, + By default, 'git diff-tree --stdin' shows differences, either in machine-readable form (without '-p') or in patch form (with '-p'). This output can be suppressed. It is only useful with '-v' flag. -v:: - This flag causes 'git-diff-tree --stdin' to also show + This flag causes 'git diff-tree --stdin' to also show the commit message before the differences. include::pretty-options.txt[] --no-commit-id:: - 'git-diff-tree' outputs a line with the commit ID when + 'git diff-tree' outputs a line with the commit ID when applicable. This flag suppressed the commit ID output. -c:: diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 0ac711230e..723a64872f 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -157,6 +157,10 @@ $ git diff -R <2> rewrites (very expensive). <2> Output diff in reverse. +SEE ALSO +-------- +linkgit:git-difftool[1]:: + Show changes using common diff tools Author ------ diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 8e9aed67d7..8250bad2ce 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -7,13 +7,13 @@ git-difftool - Show changes using common diff tools SYNOPSIS -------- -'git difftool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<'git diff' options>] +'git difftool' [<options>] <commit>{0,2} [--] [<path>...] DESCRIPTION ----------- -'git-difftool' is a git command that allows you to compare and edit files +'git difftool' is a git command that allows you to compare and edit files between revisions using common diff tools. 'git difftool' is a frontend -to 'git-diff' and accepts the same options and arguments. +to 'git diff' and accepts the same options and arguments. OPTIONS ------- @@ -33,23 +33,23 @@ OPTIONS kdiff3, kompare, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, diffuse, opendiff, p4merge and araxis. + -If a diff tool is not specified, 'git-difftool' +If a diff tool is not specified, 'git difftool' will use the configuration variable `diff.tool`. If the -configuration variable `diff.tool` is not set, 'git-difftool' +configuration variable `diff.tool` is not set, 'git difftool' will pick a suitable default. + You can explicitly provide a full path to the tool by setting the configuration variable `difftool.<tool>.path`. For example, you can configure the absolute path to kdiff3 by setting -`difftool.kdiff3.path`. Otherwise, 'git-difftool' assumes the +`difftool.kdiff3.path`. Otherwise, 'git difftool' assumes the tool is available in PATH. + Instead of running one of the known diff tools, -'git-difftool' can be customized to run an alternative program +'git difftool' can be customized to run an alternative program by specifying the command line to invoke in a configuration variable `difftool.<tool>.cmd`. + -When 'git-difftool' is invoked with this tool (either through the +When 'git difftool' is invoked with this tool (either through the `-t` or `--tool` option or the `diff.tool` configuration variable) the configured command line will be invoked with the following variables available: `$LOCAL` is set to the name of the temporary @@ -58,16 +58,31 @@ is set to the name of the temporary file containing the contents of the diff post-image. `$BASE` is provided for compatibility with custom merge tool commands and has the same value as `$LOCAL`. +-x <command>:: +--extcmd=<command>:: + Specify a custom command for viewing diffs. + 'git-difftool' ignores the configured defaults and runs + `$command $LOCAL $REMOTE` when this option is specified. + +-g:: +--gui:: + When 'git-difftool' is invoked with the `-g` or `--gui` option + the default diff tool will be read from the configured + `diff.guitool` variable instead of `diff.tool`. + See linkgit:git-diff[1] for the full list of supported options. CONFIG VARIABLES ---------------- -'git-difftool' falls back to 'git-mergetool' config variables when the +'git difftool' falls back to 'git mergetool' config variables when the difftool equivalents have not been defined. diff.tool:: The default diff tool to use. +diff.guitool:: + The default diff tool to use when `--gui` is specified. + difftool.<tool>.path:: Override the path for the given tool. This is useful in case your tool is not in the PATH. diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index 75b06f33e7..98ec6b5871 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -13,18 +13,18 @@ SYNOPSIS DESCRIPTION ----------- This program dumps the given revisions in a form suitable to be piped -into 'git-fast-import'. +into 'git fast-import'. You can use it as a human-readable bundle replacement (see linkgit:git-bundle[1]), or as a kind of an interactive -'git-filter-branch'. +'git filter-branch'. OPTIONS ------- --progress=<n>:: Insert 'progress' statements every <n> objects, to be shown by - 'git-fast-import' during import. + 'git fast-import' during import. --signed-tags=(verbatim|warn|strip|abort):: Specify how to handle signed tags. Since any transformation @@ -37,7 +37,7 @@ unsigned, with 'verbatim', they will be silently exported and with 'warn', they will be exported, but you will see a warning. --tag-of-filtered-object=(abort|drop|rewrite):: - Specify how to handle tags whose tagged objectis filtered out. + Specify how to handle tags whose tagged object is filtered out. Since revisions and files to export can be limited by path, tagged objects may be filtered completely. + @@ -91,8 +91,8 @@ marks the same across runs. already contains the necessary objects. [git-rev-list-args...]:: - A list of arguments, acceptable to 'git-rev-parse' and - 'git-rev-list', that specifies the specific objects and references + A list of arguments, acceptable to 'git rev-parse' and + 'git rev-list', that specifies the specific objects and references to export. For example, `master\~10..master` causes the current master reference to be exported along with all objects added since its 10th ancestor commit. @@ -125,7 +125,7 @@ referenced by that revision range contains the string Limitations ----------- -Since 'git-fast-import' cannot tag trees, you will not be +Since 'git fast-import' cannot tag trees, you will not be able to export the linux-2.6.git repository completely, as it contains a tag referencing a tree instead of a commit. diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 79c5f69d42..19082b04eb 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -15,7 +15,7 @@ DESCRIPTION This program is usually not what the end user wants to run directly. Most end users want to use one of the existing frontend programs, which parses a specific type of foreign source and feeds the contents -stored there to 'git-fast-import'. +stored there to 'git fast-import'. fast-import reads a mixed command/data stream from standard input and writes one or more packfiles directly into the current repository. @@ -24,7 +24,7 @@ updated branch and tag refs, fully updating the current repository with the newly imported data. The fast-import backend itself can import into an empty repository (one that -has already been initialized by 'git-init') or incrementally +has already been initialized by 'git init') or incrementally update an existing populated repository. Whether or not incremental imports are supported from a particular foreign source depends on the frontend program in use. @@ -44,11 +44,8 @@ OPTIONS not contain the old commit). --max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. - The default is 4096 (4 GiB) as that is the maximum allowed - packfile size (due to file format limitations). Some - importers may wish to lower this, such as to ensure the - resulting packfiles fit on CDs. + Maximum size of each output packfile. + The default is unlimited. --big-file-threshold=<n>:: Maximum size of a blob that fast-import will attempt to @@ -81,6 +78,20 @@ OPTIONS set of marks. If a mark is defined to different values, the last file wins. +--relative-marks:: + After specifying --relative-marks= the paths specified + with --import-marks= and --export-marks= are relative + to an internal directory in the current repository. + In git-fast-import this means that the paths are relative + to the .git/info/fast-import directory. However, other + importers may use a different location. + +--no-relative-marks:: + Negates a previous --relative-marks. Allows for combining + relative and non-relative marks by interweaving + --(no-)-relative-marks= with the --(import|export)-marks= + options. + --export-pack-edges=<file>:: After creating a packfile, print a line of data to <file> listing the filename of the packfile and the last @@ -88,7 +99,7 @@ OPTIONS This information may be useful after importing projects whose total object set exceeds the 4 GiB packfile limit, as these commits can be used as edge points during calls - to 'git-pack-objects'. + to 'git pack-objects'. --quiet:: Disable all non-fatal output, making fast-import silent when it @@ -130,9 +141,9 @@ an ideal situation, given that most conversion tools are throw-away Parallel Operation ------------------ -Like 'git-push' or 'git-fetch', imports handled by fast-import are safe to +Like 'git push' or 'git fetch', imports handled by fast-import are safe to run alongside parallel `git repack -a -d` or `git gc` invocations, -or any other Git operation (including 'git-prune', as loose objects +or any other Git operation (including 'git prune', as loose objects are never used by fast-import). fast-import does not lock the branch or tag refs it is actively importing. @@ -144,7 +155,7 @@ fast-forward update, fast-import will skip updating that ref and instead prints a warning message. fast-import will always attempt to update all branch refs, and does not stop on the first failure. -Branch updates can be forced with \--force, but its recommended that +Branch updates can be forced with \--force, but it's recommended that this only be used on an otherwise quiet repository. Using \--force is not necessary for an initial import into an empty repository. @@ -226,7 +237,7 @@ variation in formatting will cause fast-import to reject the value. + An example value is ``Tue Feb 6 11:22:18 2007 -0500''. The Git parser is accurate, but a little on the lenient side. It is the -same parser used by 'git-am' when applying patches +same parser used by 'git am' when applying patches received from email. + Some malformed strings may be accepted as valid dates. In some of @@ -259,10 +270,10 @@ is always copied into the identity string at the time it is being created by fast-import. There is no way to specify a different time or timezone. + -This particular format is supplied as its short to implement and +This particular format is supplied as it's short to implement and may be useful to a process that wants to create a new commit right now, without needing to use a working directory or -'git-update-index'. +'git update-index'. + If separate `author` and `committer` commands are used in a `commit` the timestamps may not match, as the system clock will be polled @@ -309,6 +320,15 @@ and control the current import process. More detailed discussion standard output. This command is optional and is not needed to perform an import. +`feature`:: + Require that fast-import supports the specified feature, or + abort if it does not. + +`option`:: + Specify any of the options listed under OPTIONS that do not + change stream semantic to suit the frontend's needs. This + command is optional and is not needed to perform an import. + `commit` ~~~~~~~~ Create or update a branch with a new commit, recording one logical @@ -403,7 +423,7 @@ quoting or escaping syntax is supported within `<committish>`. Here `<committish>` is any of the following: * The name of an existing branch already in fast-import's internal branch - table. If fast-import doesn't know the name, its treated as a SHA-1 + table. If fast-import doesn't know the name, it's treated as a SHA-1 expression. * A mark reference, `:<idnum>`, where `<idnum>` is the mark number. @@ -696,7 +716,7 @@ recommended, as the frontend does not (easily) have access to the complete set of bytes which normally goes into such a signature. If signing is required, create lightweight tags from within fast-import with `reset`, then create the annotated versions of those tags offline -with the standard 'git-tag' process. +with the standard 'git tag' process. `reset` ~~~~~~~ @@ -742,7 +762,7 @@ assigned mark. The mark command is optional here as some frontends have chosen to generate the Git SHA-1 for the blob on their own, and feed that -directly to `commit`. This is typically more work than its worth +directly to `commit`. This is typically more work than it's worth however, as marks are inexpensive to store and easy to use. `data` @@ -852,6 +872,62 @@ Placing a `progress` command immediately after a `checkpoint` will inform the reader when the `checkpoint` has been completed and it can safely access the refs that fast-import updated. +`feature` +~~~~~~~~~ +Require that fast-import supports the specified feature, or abort if +it does not. + +.... + 'feature' SP <feature> LF +.... + +The <feature> part of the command may be any string matching +^[a-zA-Z][a-zA-Z-]*$ and should be understood by fast-import. + +Feature work identical as their option counterparts with the +exception of the import-marks feature, see below. + +The following features are currently supported: + +* date-format +* import-marks +* export-marks +* relative-marks +* no-relative-marks +* force + +The import-marks behaves differently from when it is specified as +commandline option in that only one "feature import-marks" is allowed +per stream. Also, any --import-marks= specified on the commandline +will override those from the stream (if any). + +`option` +~~~~~~~~ +Processes the specified option so that git fast-import behaves in a +way that suits the frontend's needs. +Note that options specified by the frontend are overridden by any +options the user may specify to git fast-import itself. + +.... + 'option' SP <option> LF +.... + +The `<option>` part of the command may contain any of the options +listed in the OPTIONS section that do not change import semantics, +without the leading '--' and is treated in the same way. + +Option commands must be the first commands on the input (not counting +feature commands), to give an option command after any non-option +command is an error. + +The following commandline options change import semantics and may therefore +not be passed as option: + +* date-format +* import-marks +* export-marks +* force + Crash Reports ------------- If fast-import is supplied invalid input it will terminate with a @@ -997,7 +1073,7 @@ is not `refs/heads/TAG_FIXUP`). When committing fixups, consider using `merge` to connect the commit(s) which are supplying file revisions to the fixup branch. -Doing so will allow tools such as 'git-blame' to track +Doing so will allow tools such as 'git blame' to track through the real commit history and properly annotate the source files. @@ -1026,7 +1102,7 @@ Repacking Historical Data ~~~~~~~~~~~~~~~~~~~~~~~~~ If you are repacking very old imported data (e.g. older than the last year), consider expending some extra CPU time and supplying -\--window=50 (or higher) when you run 'git-repack'. +\--window=50 (or higher) when you run 'git repack'. This will take longer, but will also produce a smaller packfile. You only need to expend the effort once, and everyone using your project will benefit from the smaller repository. diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 47448da22e..4a8487c154 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -12,13 +12,13 @@ SYNOPSIS DESCRIPTION ----------- -Usually you would want to use 'git-fetch', which is a +Usually you would want to use 'git fetch', which is a higher level wrapper of this command, instead. Invokes 'git-upload-pack' on a possibly remote repository and asks it to send objects missing from this repository, to update the named heads. The list of commits available locally -is found out by scanning local $GIT_DIR/refs/ and sent to +is found out by scanning the local refs/ hierarchy and sent to 'git-upload-pack' running on the other end. This command degenerates to download everything to complete the @@ -33,19 +33,19 @@ OPTIONS -q:: --quiet:: - Pass '-q' flag to 'git-unpack-objects'; this makes the + Pass '-q' flag to 'git unpack-objects'; this makes the cloning process less verbose. -k:: --keep:: - Do not invoke 'git-unpack-objects' on received data, but + Do not invoke 'git unpack-objects' on received data, but create a single packfile out of it instead, and store it in the object database. If provided twice then the pack is locked against repacking. --thin:: - Spend extra cycles to minimize the number of objects to be sent. - Use it on slower connection. + Fetch a "thin" pack, which records objects in deltified form based + on objects not included in the pack to reduce network traffic. --include-tag:: If the remote side supports it, annotated tags objects will diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index 9b9e5686e4..400fe7f956 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -8,13 +8,13 @@ git-fetch - Download objects and refs from another repository SYNOPSIS -------- -'git fetch' <options> <repository> <refspec>... +'git fetch' [<options>] [<repository> [<refspec>...]] -'git fetch' <options> <group> +'git fetch' [<options>] <group> -'git fetch' --multiple <options> [<repository> | <group>]... +'git fetch' --multiple [<options>] [<repository> | <group>]... -'git fetch' --all <options> +'git fetch' --all [<options>] DESCRIPTION @@ -24,7 +24,7 @@ along with the objects necessary to complete them. The ref names and their object names of fetched refs are stored in `.git/FETCH_HEAD`. This information is left for a later merge -operation done by 'git-merge'. +operation done by 'git merge'. When <refspec> stores the fetched result in tracking branches, the tags that point at these branches are automatically diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 394a77a35f..020028cf9a 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -116,7 +116,7 @@ OPTIONS --commit-filter <command>:: This is the filter for performing the commit. If this filter is specified, it will be called instead of the - 'git-commit-tree' command, with arguments of the form + 'git commit-tree' command, with arguments of the form "<TREE_ID> [-p <PARENT_COMMIT_ID>]..." and the log message on stdin. The commit id is expected on stdout. + @@ -127,10 +127,10 @@ have all of them as parents. You can use the 'map' convenience function in this filter, and other convenience functions, too. For example, calling 'skip_commit "$@"' will leave out the current commit (but not its changes! If you want -that, use 'git-rebase' instead). +that, use 'git rebase' instead). + -You can also use the 'git_commit_non_empty_tree "$@"' instead of -'git commit-tree "$@"' if you don't wish to keep commits with a single parent +You can also use the `git_commit_non_empty_tree "$@"` instead of +`git commit-tree "$@"` if you don't wish to keep commits with a single parent and that makes no change to the tree. --tag-name-filter <command>:: @@ -179,7 +179,7 @@ the nearest ancestor that was not excluded. and only one parent, it will hence keep merges points. Also, this option is not compatible with the use of '--commit-filter'. Though you just need to use the function 'git_commit_non_empty_tree "$@"' instead - of the 'git commit-tree "$@"' idiom in your commit filter to make that + of the `git commit-tree "$@"` idiom in your commit filter to make that happen. --original <namespace>:: @@ -196,15 +196,15 @@ the nearest ancestor that was not excluded. -f:: --force:: - 'git-filter-branch' refuses to start with an existing temporary + 'git filter-branch' refuses to start with an existing temporary directory or when there are already refs starting with 'refs/original/', unless forced. <rev-list options>...:: - Arguments for 'git-rev-list'. All positive refs included by + Arguments for 'git rev-list'. All positive refs included by these options are rewritten. You may also specify options such as '--all', but you must use '--' to separate them from - the 'git-filter-branch' options. + the 'git filter-branch' options. Examples @@ -221,7 +221,7 @@ However, if the file is absent from the tree of some commit, a simple `rm filename` will fail for that tree and commit. Thus you may instead want to use `rm -f filename` as the script. -Using `\--index-filter` with 'git-rm' yields a significantly faster +Using `\--index-filter` with 'git rm' yields a significantly faster version. Like with using `rm filename`, `git rm --cached filename` will fail if the file is absent from the tree of a commit. If you want to "completely forget" a file, it does not matter when it entered @@ -303,7 +303,7 @@ and all children of the merge will become merge commits with P1,P2 as their parents instead of the merge commit. You can rewrite the commit log messages using `--msg-filter`. For -example, 'git-svn-id' strings in a repository created by 'git-svn' can +example, 'git svn-id' strings in a repository created by 'git svn' can be removed this way: ------------------------------------------------------- @@ -314,7 +314,7 @@ git filter-branch --msg-filter ' To restrict rewriting to only part of the history, specify a revision range in addition to the new branch name. The new branch name will -point to the top-most revision that a 'git-rev-list' of this range +point to the top-most revision that a 'git rev-list' of this range will print. If you need to add 'Acked-by' lines to, say, the last 10 commits (none @@ -330,7 +330,7 @@ git filter-branch --msg-filter ' *NOTE* the changes introduced by the commits, and which are not reverted by subsequent commits, will still be in the rewritten branch. If you want to throw out _changes_ together with the commits, you should use the -interactive mode of 'git-rebase'. +interactive mode of 'git rebase'. Consider this history: @@ -358,7 +358,7 @@ To move the whole tree into a subdirectory, or remove it from there: --------------------------------------------------------------- git filter-branch --index-filter \ - 'git ls-files -s | sed "s-\t-&newsubdir/-" | + 'git ls-files -s | sed "s-\t\"*-&newsubdir/-" | GIT_INDEX_FILE=$GIT_INDEX_FILE.new \ git update-index --index-info && mv $GIT_INDEX_FILE.new $GIT_INDEX_FILE' HEAD diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index a586950b48..a585dbe898 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -16,7 +16,7 @@ DESCRIPTION ----------- Takes the list of merged objects on stdin and produces a suitable commit message to be used for the merge commit, usually to be -passed as the '<merge-message>' argument of 'git-merge'. +passed as the '<merge-message>' argument of 'git merge'. This command is intended mostly for internal use by scripts automatically invoking 'git merge'. diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 8dc873fd44..7e83288d18 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -82,7 +82,7 @@ objecttype:: The type of the object (`blob`, `tree`, `commit`, `tag`). objectsize:: - The size of the object (the same as 'git-cat-file -s' reports). + The size of the object (the same as 'git cat-file -s' reports). objectname:: The object name (aka SHA-1). diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index f1fd0df08a..9674f9de67 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -29,7 +29,7 @@ DESCRIPTION Prepare each commit with its patch in one file per commit, formatted to resemble UNIX mailbox format. The output of this command is convenient for e-mail submission or -for use with 'git-am'. +for use with 'git am'. There are two ways to specify which commits to operate on. @@ -221,7 +221,7 @@ EXAMPLES -------- * Extract commits between revisions R1 and R2, and apply them on top of -the current branch using 'git-am' to cherry-pick them: +the current branch using 'git am' to cherry-pick them: + ------------ $ git format-patch -k --stdout R1..R2 | git am -3 -k diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 6fe9484da3..3ad48a6336 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -21,7 +21,7 @@ OPTIONS <object>:: An object to treat as the head of an unreachability trace. + -If no objects are given, 'git-fsck' defaults to using the +If no objects are given, 'git fsck' defaults to using the index file, all SHA1 references in .git/refs/*, and all reflogs (unless --no-reflogs is given) as heads. @@ -85,7 +85,7 @@ So for example will do quite a _lot_ of verification on the tree. There are a few extra validity tests to be added (make sure that tree objects are -sorted properly etc), but on the whole if 'git-fsck' is happy, you +sorted properly etc), but on the whole if 'git fsck' is happy, you do have a valid tree. Any corrupt objects you will have to find in backups or other archives diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 4cd9cdf905..189573a3b3 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -15,13 +15,13 @@ DESCRIPTION Runs a number of housekeeping tasks within the current repository, such as compressing file revisions (to reduce disk space and increase performance) and removing unreachable objects which may have been -created from prior invocations of 'git-add'. +created from prior invocations of 'git add'. Users are encouraged to run this task on a regular basis within each repository to maintain good disk space utilization and good operating performance. -Some git commands may automatically run 'git-gc'; see the `--auto` flag +Some git commands may automatically run 'git gc'; see the `--auto` flag below for details. If you know what you're doing and all you want is to disable this behavior permanently without further considerations, just do: @@ -33,15 +33,15 @@ OPTIONS ------- --aggressive:: - Usually 'git-gc' runs very quickly while providing good disk + Usually 'git gc' runs very quickly while providing good disk space utilization and performance. This option will cause - 'git-gc' to more aggressively optimize the repository at the expense + 'git gc' to more aggressively optimize the repository at the expense of taking much more time. The effects of this optimization are persistent, so this option only needs to be used occasionally; every few hundred changesets or so. --auto:: - With this option, 'git-gc' checks whether any housekeeping is + With this option, 'git gc' checks whether any housekeeping is required; if not, it exits without performing any work. Some git commands run `git gc --auto` after performing operations that could create many loose objects. @@ -50,13 +50,13 @@ Housekeeping is required if there are too many loose objects or too many packs in the repository. If the number of loose objects exceeds the value of the `gc.auto` configuration variable, then all loose objects are combined into a single pack using -'git-repack -d -l'. Setting the value of `gc.auto` to 0 +`git repack -d -l`. Setting the value of `gc.auto` to 0 disables automatic packing of loose objects. + If the number of packs exceeds the value of `gc.autopacklimit`, then existing packs (except those marked with a `.keep` file) are consolidated into a single pack by using the `-A` option of -'git-repack'. Setting `gc.autopacklimit` to 0 disables +'git repack'. Setting `gc.autopacklimit` to 0 disables automatic consolidation of packs. --prune=<date>:: @@ -97,7 +97,7 @@ how long records of conflicted merge you have not resolved are kept. This defaults to 15 days. The optional configuration variable 'gc.packrefs' determines if -'git-gc' runs 'git-pack-refs'. This can be set to "nobare" to enable +'git gc' runs 'git pack-refs'. This can be set to "nobare" to enable it within all non-bare repos or it can be set to a boolean value. This defaults to true. @@ -116,10 +116,10 @@ default is "2 weeks ago". Notes ----- -'git-gc' tries very hard to be safe about the garbage it collects. In +'git gc' tries very hard to be safe about the garbage it collects. In particular, it will keep not only objects referenced by your current set of branches and tags, but also objects referenced by the index, remote -tracking branches, refs saved by 'git-filter-branch' in +tracking branches, refs saved by 'git filter-branch' in refs/original/, or reflogs (which may reference commits in branches that were later amended or rewound). diff --git a/Documentation/git-get-tar-commit-id.txt b/Documentation/git-get-tar-commit-id.txt index 84f23ee525..790af9573b 100644 --- a/Documentation/git-get-tar-commit-id.txt +++ b/Documentation/git-get-tar-commit-id.txt @@ -14,12 +14,12 @@ SYNOPSIS DESCRIPTION ----------- Acts as a filter, extracting the commit ID stored in archives created by -'git-archive'. It reads only the first 1024 bytes of input, thus its +'git archive'. It reads only the first 1024 bytes of input, thus its runtime is not influenced by the size of <tarfile> very much. -If no commit ID is found, 'git-get-tar-commit-id' quietly exists with a +If no commit ID is found, 'git get-tar-commit-id' quietly exists with a return code of 1. This can happen if <tarfile> had not been created -using 'git-archive' or if the first parameter of 'git-archive' had been +using 'git archive' or if the first parameter of 'git archive' had been a tree ID instead of a commit ID or tag. diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 8c700200f5..ee506e67f0 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -9,32 +9,35 @@ git-grep - Print lines matching a pattern SYNOPSIS -------- [verse] -'git grep' [--cached] - [-a | --text] [-I] [-i | --ignore-case] [-w | --word-regexp] +'git grep' [-a | --text] [-I] [-i | --ignore-case] [-w | --word-regexp] [-v | --invert-match] [-h|-H] [--full-name] [-E | --extended-regexp] [-G | --basic-regexp] [-F | --fixed-strings] [-n] [-l | --files-with-matches] [-L | --files-without-match] [-z | --null] - [-c | --count] [--all-match] + [-c | --count] [--all-match] [-q | --quiet] [--max-depth <depth>] [--color | --no-color] [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> - [--and|--or|--not|(|)|-e <pattern>...] [<tree>...] - [--] [<path>...] + [--and|--or|--not|(|)|-e <pattern>...] + [--cached | --no-index | <tree>...] + [--] [<pathspec>...] DESCRIPTION ----------- -Look for specified patterns in the working tree files, blobs -registered in the index file, or given tree objects. +Look for specified patterns in the tracked files in the work tree, blobs +registered in the index file, or blobs in given tree objects. OPTIONS ------- --cached:: - Instead of searching in the working tree files, check - the blobs registered in the index file. + Instead of searching tracked files in the working tree, search + blobs registered in the index file. + +--no-index:: + Search files in the current directory, not just those tracked by git. -a:: --text:: @@ -49,7 +52,7 @@ OPTIONS Don't match the pattern in binary files. --max-depth <depth>:: - For each pathspec given on command line, descend at most <depth> + For each <pathspec> given on command line, descend at most <depth> levels of directories. A negative value means no limit. -w:: @@ -98,8 +101,8 @@ OPTIONS --files-without-match:: Instead of showing every matched line, show only the names of files that contain (or do not contain) matches. - For better compatibility with 'git-diff', --name-only is a - synonym for --files-with-matches. + For better compatibility with 'git diff', `--name-only` is a + synonym for `--files-with-matches`. -z:: --null:: @@ -125,7 +128,7 @@ OPTIONS matches. -<num>:: - A shortcut for specifying -C<num>. + A shortcut for specifying `-C<num>`. -p:: --show-function:: @@ -140,7 +143,7 @@ OPTIONS -e:: The next parameter is the pattern. This option has to be - used for patterns starting with - and should be used in + used for patterns starting with `-` and should be used in scripts passing user input to grep. Multiple patterns are combined by 'or'. @@ -158,16 +161,29 @@ OPTIONS this flag is specified to limit the match to files that have lines to match all of them. -`<tree>...`:: - Search blobs in the trees for specified patterns. +-q:: +--quiet:: + Do not output matched lines; instead, exit with status 0 when + there is a match and with non-zero status when there isn't. + +<tree>...:: + Instead of searching tracked files in the working tree, search + blobs in the given trees. \--:: Signals the end of options; the rest of the parameters - are <path> limiters. + are <pathspec> limiters. +<pathspec>...:: + If given, limit the search to paths matching at least one pattern. + Both leading paths match and glob(7) patterns are supported. -Example -------- +Examples +-------- + +git grep 'time_t' -- '*.[ch]':: + Looks for `time_t` in all tracked .c and .h files in the working + directory and its subdirectories. git grep -e \'#define\' --and \( -e MAX_PATH -e PATH_MAX \):: Looks for a line that has `#define` and either `MAX_PATH` or diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index d0bc98b852..2563710b56 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -11,19 +11,19 @@ SYNOPSIS DESCRIPTION ----------- -A Tcl/Tk based graphical user interface to Git. 'git-gui' focuses +A Tcl/Tk based graphical user interface to Git. 'git gui' focuses on allowing users to make changes to their repository by making new commits, amending existing ones, creating branches, performing local merges, and fetching/pushing to remote repositories. -Unlike 'gitk', 'git-gui' focuses on commit generation +Unlike 'gitk', 'git gui' focuses on commit generation and single file annotation and does not show project history. It does however supply menu actions to start a 'gitk' session from -within 'git-gui'. +within 'git gui'. -'git-gui' is known to work on all popular UNIX systems, Mac OS X, +'git gui' is known to work on all popular UNIX systems, Mac OS X, and Windows (under both Cygwin and MSYS). To the extent possible -OS specific user interface guidelines are followed, making 'git-gui' +OS specific user interface guidelines are followed, making 'git gui' a fairly native interface for users. COMMANDS @@ -38,13 +38,13 @@ browser:: browser are opened in the blame viewer. citool:: - Start 'git-gui' and arrange to make exactly one commit before + Start 'git gui' and arrange to make exactly one commit before exiting and returning to the shell. The interface is limited to only commit actions, slightly reducing the application's startup time and simplifying the menubar. version:: - Display the currently running version of 'git-gui'. + Display the currently running version of 'git gui'. Examples @@ -103,15 +103,15 @@ SEE ALSO linkgit:gitk[1]:: The git repository browser. Shows branches, commit history and file differences. gitk is the utility started by - 'git-gui''s Repository Visualize actions. + 'git gui''s Repository Visualize actions. Other ----- -'git-gui' is actually maintained as an independent project, but stable +'git gui' is actually maintained as an independent project, but stable versions are distributed as part of the Git suite for the convenience of end users. -A 'git-gui' development repository can be obtained from: +A 'git gui' development repository can be obtained from: git clone git://repo.or.cz/git-gui.git diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 0af40cfb85..479fce4693 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -18,7 +18,7 @@ Computes the object ID value for an object with specified type with the contents of the named file (which can be outside of the work tree), and optionally writes the resulting object into the object database. Reports its object ID to its standard output. -This is used by 'git-cvsimport' to update the index +This is used by 'git cvsimport' to update the index without modifying files in the work tree. When <type> is not specified, it defaults to "blob". diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index d9b9c34b3a..f8df109d07 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -55,8 +55,8 @@ other display programs (see below). + The web browser can be specified using the configuration variable 'help.browser', or 'web.browser' if the former is not set. If none of -these config variables is set, the 'git-web--browse' helper script -(called by 'git-help') will pick a suitable default. See +these config variables is set, the 'git web--browse' helper script +(called by 'git help') will pick a suitable default. See linkgit:git-web--browse[1] for more information about this. CONFIGURATION VARIABLES @@ -67,7 +67,7 @@ help.format If no command line option is passed, the 'help.format' configuration variable will be checked. The following values are supported for this -variable; they make 'git-help' behave as their corresponding command +variable; they make 'git help' behave as their corresponding command line option: * "man" corresponds to '-m|--man', @@ -122,7 +122,7 @@ man.<tool>.path You can explicitly provide a full path to your preferred man viewer by setting the configuration variable 'man.<tool>.path'. For example, you can configure the absolute path to konqueror by setting -'man.konqueror.path'. Otherwise, 'git-help' assumes the tool is +'man.konqueror.path'. Otherwise, 'git help' assumes the tool is available in PATH. man.<tool>.cmd diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 67aec067c8..277d9e141b 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -8,21 +8,26 @@ git-http-backend - Server side implementation of Git over HTTP SYNOPSIS -------- [verse] -'git-http-backend' +'git http-backend' DESCRIPTION ----------- A simple CGI program to serve the contents of a Git repository to Git clients accessing the repository over http:// and https:// protocols. -The program supports clients fetching using both the smart HTTP protcol +The program supports clients fetching using both the smart HTTP protocol and the backwards-compatible dumb HTTP protocol, as well as clients pushing using the smart HTTP protocol. +It verifies that the directory has the magic file +"git-daemon-export-ok", and it will refuse to export any git directory +that hasn't explicitly been marked for export this way (unless the +GIT_HTTP_EXPORT_ALL environmental variable is set). + By default, only the `upload-pack` service is enabled, which serves -'git-fetch-pack' and 'git-ls-remote' clients, which are invoked from -'git-fetch', 'git-pull', and 'git-clone'. If the client is authenticated, -the `receive-pack` service is enabled, which serves 'git-send-pack' -clients, which is invoked from 'git-push'. +'git fetch-pack' and 'git ls-remote' clients, which are invoked from +'git fetch', 'git pull', and 'git clone'. If the client is authenticated, +the `receive-pack` service is enabled, which serves 'git send-pack' +clients, which is invoked from 'git push'. SERVICES -------- @@ -30,7 +35,7 @@ These services can be enabled/disabled using the per-repository configuration file: http.getanyfile:: - This serves older Git clients which are unable to use the + This serves Git clients older than version 1.6.6 that are unable to use the upload pack service. When enabled, clients are able to read any file within the repository, including objects that are no longer reachable from a branch but are still present. @@ -38,12 +43,12 @@ http.getanyfile:: by setting this configuration item to `false`. http.uploadpack:: - This serves 'git-fetch-pack' and 'git-ls-remote' clients. + This serves 'git fetch-pack' and 'git ls-remote' clients. It is enabled by default, but a repository can disable it by setting this configuration item to `false`. http.receivepack:: - This serves 'git-send-pack' clients, allowing push. It is + This serves 'git send-pack' clients, allowing push. It is disabled by default for anonymous users, and enabled by default for users authenticated by the web server. It can be disabled by setting this item to `false`, or enabled for all @@ -51,11 +56,11 @@ http.receivepack:: URL TRANSLATION --------------- -To determine the location of the repository on disk, 'git-http-backend' +To determine the location of the repository on disk, 'git http-backend' concatenates the environment variables PATH_INFO, which is set automatically by the web server, and GIT_PROJECT_ROOT, which must be set manually in the web server configuration. If GIT_PROJECT_ROOT is not -set, 'git-http-backend' reads PATH_TRANSLATED, which is also set +set, 'git http-backend' reads PATH_TRANSLATED, which is also set automatically by the web server. EXAMPLES @@ -70,6 +75,7 @@ Apache 2.x:: + ---------------------------------------------------------------- SetEnv GIT_PROJECT_ROOT /var/www/git +SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/ ---------------------------------------------------------------- + @@ -98,7 +104,7 @@ directive around the repository, or one of its parent directories: ---------------------------------------------------------------- + To serve gitweb at the same url, use a ScriptAliasMatch to only -those URLs that 'git-http-backend' can handle, and forward the +those URLs that 'git http-backend' can handle, and forward the rest to gitweb: + ---------------------------------------------------------------- @@ -147,7 +153,7 @@ ScriptAlias /git/ /var/www/cgi-bin/gitweb.cgi/ ENVIRONMENT ----------- -'git-http-backend' relies upon the CGI environment variables set +'git http-backend' relies upon the CGI environment variables set by the invoking web server, including: * PATH_INFO (if GIT_PROJECT_ROOT is set, otherwise PATH_TRANSLATED) @@ -157,6 +163,10 @@ by the invoking web server, including: * QUERY_STRING * REQUEST_METHOD +The GIT_HTTP_EXPORT_ALL environmental variable may be passed to +'git-http-backend' to bypass the check for the "git-daemon-export-ok" +file in each repository before allowing export of that repository. + The backend process sets GIT_COMMITTER_NAME to '$REMOTE_USER' and GIT_COMMITTER_EMAIL to '$\{REMOTE_USER}@http.$\{REMOTE_ADDR\}', ensuring that any reflogs created by 'git-receive-pack' contain some diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt index e7c796155f..d91cb7ff85 100644 --- a/Documentation/git-http-fetch.txt +++ b/Documentation/git-http-fetch.txt @@ -35,7 +35,7 @@ commit-id:: --stdin:: Instead of a commit id on the command line (which is not expected in this - case), 'git-http-fetch' expects lines on stdin in the format + case), 'git http-fetch' expects lines on stdin in the format <commit-id>['\t'<filename-as-in--w>] diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index d016dafd49..ad446b0e8b 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -13,10 +13,12 @@ SYNOPSIS DESCRIPTION ----------- -This command uploads a mailbox generated with 'git-format-patch' +This command uploads a mailbox generated with 'git format-patch' into an IMAP drafts folder. This allows patches to be sent as other email is when using mail clients that cannot read mailbox -files directly. +files directly. The command also works with any general mailbox +in which emails have the fields "From", "Date", and "Subject" in +that order. Typical usage is something like: @@ -118,12 +120,6 @@ Thunderbird in particular is known to be problematic. Thunderbird users may wish to visit this web page for more information: http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email - -BUGS ----- -Doesn't handle lines starting with "From " in the message body. - - Author ------ Derived from isync 1.0.1 by Mike McCormack. diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 4b5c743c1e..f3ccc72f0d 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -43,23 +43,19 @@ OPTIONS a default name determined from the pack content. If <pack-file> is not specified consider using --keep to prevent a race condition between this process and - 'git-repack'. + 'git repack'. --fix-thin:: - It is possible for 'git-pack-objects' to build - "thin" pack, which records objects in deltified form based on - objects not included in the pack to reduce network traffic. - Those objects are expected to be present on the receiving end - and they must be included in the pack for that pack to be self - contained and indexable. Without this option any attempt to - index a thin pack will fail. This option only makes sense in - conjunction with --stdin. + Fix a "thin" pack produced by `git pack-objects --thin` (see + linkgit:git-pack-objects[1] for details) by adding the + excluded objects the deltified objects are based on to the + pack. This option only makes sense in conjunction with --stdin. --keep:: Before moving the index into its final destination create an empty .keep file for the associated pack file. This option is usually necessary with --stdin to prevent a - simultaneous 'git-repack' process from deleting + simultaneous 'git repack' process from deleting the newly constructed pack and index before refs can be updated to use objects contained in the pack. @@ -86,7 +82,7 @@ Once the index has been created, the list of object names is sorted and the SHA1 hash of that list is printed to stdout. If --stdin was also used then this is prefixed by either "pack\t", or "keep\t" if a new .keep file was successfully created. This is useful to remove a -.keep file used as a lock to prevent the race with 'git-repack' +.keep file used as a lock to prevent the race with 'git repack' mentioned above. diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index f081b24d9d..7ee102da48 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -95,11 +95,11 @@ If the object storage directory is specified via the `$GIT_OBJECT_DIRECTORY` environment variable then the sha1 directories are created underneath - otherwise the default `$GIT_DIR/objects` directory is used. -Running 'git-init' in an existing repository is safe. It will not overwrite -things that are already there. The primary reason for rerunning 'git-init' +Running 'git init' in an existing repository is safe. It will not overwrite +things that are already there. The primary reason for rerunning 'git init' is to pick up newly added templates. -Note that 'git-init' is the same as 'git-init-db'. The command +Note that 'git init' is the same as 'git init-db'. The command was primarily meant to initialize the object database, but over time it has become responsible for setting up the other aspects of the repository, such as installing the default hooks and diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 0771f25443..a1f17df074 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -44,7 +44,7 @@ OPTIONS -b:: --browser:: The web browser that should be used to view the gitweb - page. This will be passed to the 'git-web--browse' helper + page. This will be passed to the 'git web--browse' helper script along with the URL of the gitweb instance. See linkgit:git-web--browse[1] for more information about this. If the script fails, the URL will be printed to stdout. diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 3d79de11ec..0e39bb61ee 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -14,9 +14,9 @@ DESCRIPTION ----------- Shows the commit logs. -The command takes options applicable to the 'git-rev-list' +The command takes options applicable to the 'git rev-list' command to control what is shown and how, and options applicable to -the 'git-diff-*' commands to control how the changes +the 'git diff-*' commands to control how the changes each commit introduces are shown. @@ -107,6 +107,17 @@ git log --follow builtin-rev-list.c:: those commits that occurred before the file was given its present name. +git log --branches --not --remotes=origin:: + + Shows all commits that are in any of local branches but not in + any of remote tracking branches for 'origin' (what you have that + origin doesn't). + +git log master --not --remotes=*/master:: + + Shows all commits that are in local master but not in any remote + repository master branches. + Discussion ---------- diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 625723e41f..3521637b58 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -109,6 +109,7 @@ OPTIONS Identify the file status with the following tags (followed by a space) at the start of each line: H:: cached + S:: skip-worktree M:: unmerged R:: removed/deleted C:: modified/changed @@ -140,12 +141,12 @@ OPTIONS Output ------ -show files just outputs the filename unless '--stage' is specified in +'git ls-files' just outputs the filenames unless '--stage' is specified in which case it outputs: [<tag> ]<mode> <object> <stage> <file> -'git-ls-files --unmerged' and 'git-ls-files --stage' can be used to examine +'git ls-files --unmerged' and 'git ls-files --stage' can be used to examine detailed information on unmerged paths. For an unmerged path, instead of recording a single mode/SHA1 pair, @@ -162,7 +163,7 @@ respectively. Exclude Patterns ---------------- -'git-ls-files' can use a list of "exclude patterns" when +'git ls-files' can use a list of "exclude patterns" when traversing the directory tree and finding files to show when the flags --others or --ignored are specified. linkgit:gitignore[5] specifies the format of exclude patterns. @@ -178,7 +179,7 @@ These exclude patterns come from these places, in order: in the same order they appear in the file. 3. command line flag --exclude-per-directory=<name> specifies - a name of the file in each directory 'git-ls-files' + a name of the file in each directory 'git ls-files' examines, normally `.gitignore`. Files in deeper directories take precedence. Patterns are ordered in the same order they appear in the files. diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index c3fdccb4c2..1f89d36800 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -28,7 +28,7 @@ in the current working directory. Note that: in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is 'sub/dir' in 'HEAD'). You don't want to give a tree that is not at the - root level (e.g. 'git ls-tree -r HEAD:sub dir') in this case, as that + root level (e.g. `git ls-tree -r HEAD:sub dir`) in this case, as that would result in asking for 'sub/sub/dir' in the 'HEAD' commit. However, the current working directory can be ignored by passing --full-tree option. @@ -84,7 +84,7 @@ Output Format Unless the `-z` option is used, TAB, LF, and backslash characters in pathnames are represented as `\t`, `\n`, and `\\`, respectively. -This output format is compatible with what '--index-info --stdin' of +This output format is compatible with what `--index-info --stdin` of 'git update-index' expects. When the `-l` option is used, format changes to diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index b81ac98cf0..e3d58cbac3 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -16,7 +16,7 @@ DESCRIPTION Reads a single e-mail message from the standard input, and writes the commit log message in <msg> file, and the patches in <patch> file. The author name, e-mail and e-mail subject are -written out to the standard output to be used by 'git-am' +written out to the standard output to be used by 'git am' to create a commit. It is usually not necessary to use this command directly. See linkgit:git-am[1] instead. @@ -30,7 +30,7 @@ OPTIONS whitespaces, (3) '[' up to ']', typically '[PATCH]', and then prepends "[PATCH] ". This flag forbids this munging, and is most useful when used to read back - 'git-format-patch -k' output. + 'git format-patch -k' output. -b:: When -k is not in effect, all leading strings bracketed with '[' diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index 303537357b..234269ae59 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -10,20 +10,21 @@ SYNOPSIS -------- [verse] 'git merge-file' [-L <current-name> [-L <base-name> [-L <other-name>]]] - [-p|--stdout] [-q|--quiet] <current-file> <base-file> <other-file> + [--ours|--theirs] [-p|--stdout] [-q|--quiet] + <current-file> <base-file> <other-file> DESCRIPTION ----------- -'git-merge-file' incorporates all changes that lead from the `<base-file>` +'git merge-file' incorporates all changes that lead from the `<base-file>` to `<other-file>` into `<current-file>`. The result ordinarily goes into -`<current-file>`. 'git-merge-file' is useful for combining separate changes +`<current-file>`. 'git merge-file' is useful for combining separate changes to an original. Suppose `<base-file>` is the original, and both `<current-file>` and `<other-file>` are modifications of `<base-file>`, -then 'git-merge-file' combines both changes. +then 'git merge-file' combines both changes. A conflict occurs if both `<current-file>` and `<other-file>` have changes -in a common segment of lines. If a conflict is found, 'git-merge-file' +in a common segment of lines. If a conflict is found, 'git merge-file' normally outputs a warning and brackets the conflict with lines containing <<<<<<< and >>>>>>> markers. A typical conflict will look like this: @@ -34,12 +35,14 @@ normally outputs a warning and brackets the conflict with lines containing >>>>>>> B If there are conflicts, the user should edit the result and delete one of -the alternatives. +the alternatives. When `--ours` or `--theirs` option is in effect, however, +these conflicts are resolved favouring lines from `<current-file>` or +lines from `<other-file>` respectively. The exit value of this program is negative on error, and the number of conflicts otherwise. If the merge was clean, the exit value is 0. -'git-merge-file' is designed to be a minimal clone of RCS 'merge'; that is, it +'git merge-file' is designed to be a minimal clone of RCS 'merge'; that is, it implements all of RCS 'merge''s functionality which is needed by linkgit:git[1]. @@ -62,6 +65,11 @@ OPTIONS -q:: Quiet; do not warn about conflicts. +--ours:: +--theirs:: + Instead of leaving conflicts in the file, resolve conflicts + favouring our (or their) side of the lines. + EXAMPLES -------- diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt index 123e6d024a..4d266de9cc 100644 --- a/Documentation/git-merge-index.txt +++ b/Documentation/git-merge-index.txt @@ -36,14 +36,14 @@ OPTIONS failure usually indicates conflicts during the merge). This is for porcelains which might want to emit custom messages. -If 'git-merge-index' is called with multiple <file>s (or -a) then it +If 'git merge-index' is called with multiple <file>s (or -a) then it processes them in turn only stopping if merge returns a non-zero exit code. Typically this is run with a script calling git's imitation of the 'merge' command from the RCS package. -A sample script called 'git-merge-one-file' is included in the +A sample script called 'git merge-one-file' is included in the distribution. ALERT ALERT ALERT! The git "merge object order" is different from the @@ -68,10 +68,10 @@ or This is added AA in the branch B. fatal: merge program failed -where the latter example shows how 'git-merge-index' will stop trying to +where the latter example shows how 'git merge-index' will stop trying to merge once anything has returned an error (i.e., `cat` returned an error for the AA file, because it didn't exist in the original, and thus -'git-merge-index' didn't even try to merge the MM thing). +'git merge-index' didn't even try to merge the MM thing). Author ------ diff --git a/Documentation/git-merge-one-file.txt b/Documentation/git-merge-one-file.txt index dc8a96adb0..a163cfca69 100644 --- a/Documentation/git-merge-one-file.txt +++ b/Documentation/git-merge-one-file.txt @@ -8,12 +8,12 @@ git-merge-one-file - The standard helper program to use with git-merge-index SYNOPSIS -------- -'git-merge-one-file' +'git merge-one-file' DESCRIPTION ----------- -This is the standard helper program to use with 'git-merge-index' -to resolve a merge after the trivial merge done with 'git-read-tree -m'. +This is the standard helper program to use with 'git merge-index' +to resolve a merge after the trivial merge done with 'git read-tree -m'. Author ------ diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index e886c2ef54..c2325ef90e 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -9,18 +9,47 @@ git-merge - Join two or more development histories together SYNOPSIS -------- [verse] -'git merge' [-n] [--stat] [--no-commit] [--squash] [-s <strategy>]... - [-m <msg>] <remote>... -'git merge' <msg> HEAD <remote>... +'git merge' [-n] [--stat] [--no-commit] [--squash] + [-s <strategy>] [-X <strategy-option>] + [--[no-]rerere-autoupdate] [-m <msg>] <commit>... +'git merge' <msg> HEAD <commit>... DESCRIPTION ----------- -This is the top-level interface to the merge machinery -which drives multiple merge strategy scripts. +Incorporates changes from the named commits (since the time their +histories diverged from the current branch) into the current +branch. This command is used by 'git pull' to incorporate changes +from another repository and can be used by hand to merge changes +from one branch into another. -The second syntax (<msg> `HEAD` <remote>) is supported for +Assume the following history exists and the current branch is +"`master`": + +------------ + A---B---C topic + / + D---E---F---G master +------------ + +Then "`git merge topic`" will replay the changes made on the +`topic` branch since it diverged from `master` (i.e., `E`) until +its current commit (`C`) on top of `master`, and record the result +in a new commit along with the names of the two parent commits and +a log message from the user describing the changes. + +------------ + A---B---C topic + / \ + D---E---F---G---H master +------------ + +The second syntax (<msg> `HEAD` <commit>...) is supported for historical reasons. Do not use it from the command line or in -new scripts. It is the same as `git merge -m <msg> <remote>`. +new scripts. It is the same as `git merge -m <msg> <commit>...`. + +*Warning*: Running 'git merge' with uncommitted changes is +discouraged: while possible, it leaves you in a state that is hard to +back out of in the case of a conflict. OPTIONS @@ -33,93 +62,83 @@ include::merge-options.txt[] used to give a good default for automated 'git merge' invocations. -<remote>...:: - Other branch heads to merge into our branch. You need at - least one <remote>. Specifying more than one <remote> - obviously means you are trying an Octopus. +--rerere-autoupdate:: +--no-rerere-autoupdate:: + Allow the rerere mechanism to update the index with the + result of auto-conflict resolution if possible. -include::merge-strategies.txt[] +<commit>...:: + Commits, usually other branch heads, to merge into our branch. + You need at least one <commit>. Specifying more than one + <commit> obviously means you are trying an Octopus. -If you tried a merge which resulted in complex conflicts and -want to start over, you can recover with 'git-reset'. +PRE-MERGE CHECKS +---------------- -CONFIGURATION -------------- -include::merge-config.txt[] +Before applying outside changes, you should get your own work in +good shape and committed locally, so it will not be clobbered if +there are conflicts. See also linkgit:git-stash[1]. +'git pull' and 'git merge' will stop without doing anything when +local uncommitted changes overlap with files that 'git pull'/'git +merge' may need to update. -branch.<name>.mergeoptions:: - Sets default options for merging into branch <name>. The syntax and - supported options are the same as those of 'git merge', but option - values containing whitespace characters are currently not supported. +To avoid recording unrelated changes in the merge commit, +'git pull' and 'git merge' will also abort if there are any changes +registered in the index relative to the `HEAD` commit. (One +exception is when the changed index entries are in the state that +would result from the merge already.) -HOW MERGE WORKS ---------------- - -A merge is always between the current `HEAD` and one or more -commits (usually, branch head or tag), and the index file must -match the tree of `HEAD` commit (i.e. the contents of the last commit) -when it starts out. In other words, `git diff --cached HEAD` must -report no changes. (One exception is when the changed index -entries are already in the same state that would result from -the merge anyway.) - -Three kinds of merge can happen: - -* The merged commit is already contained in `HEAD`. This is the - simplest case, called "Already up-to-date." - -* `HEAD` is already contained in the merged commit. This is the - most common case especially when invoked from 'git pull': - you are tracking an upstream repository, have committed no local - changes and now you want to update to a newer upstream revision. - Your `HEAD` (and the index) is updated to point at the merged - commit, without creating an extra merge commit. This is - called "Fast-forward". - -* Both the merged commit and `HEAD` are independent and must be - tied together by a merge commit that has both of them as its parents. - The rest of this section describes this "True merge" case. - -The chosen merge strategy merges the two commits into a single -new source tree. -When things merge cleanly, this is what happens: - -1. The results are updated both in the index file and in your - working tree; -2. Index file is written out as a tree; -3. The tree gets committed; and -4. The `HEAD` pointer gets advanced. - -Because of 2., we require that the original state of the index -file matches exactly the current `HEAD` commit; otherwise we -will write out your local changes already registered in your -index file along with the merge result, which is not good. -Because 1. involves only those paths differing between your -branch and the remote branch you are pulling from during the -merge (which is typically a fraction of the whole tree), you can -have local modifications in your working tree as long as they do -not overlap with what the merge updates. - -When there are conflicts, the following happens: - -1. `HEAD` stays the same. - -2. Cleanly merged paths are updated both in the index file and - in your working tree. +If all named commits are already ancestors of `HEAD`, 'git merge' +will exit early with the message "Already up-to-date." + +FAST-FORWARD MERGE +------------------ + +Often the current branch head is an ancestor of the named commit. +This is the most common case especially when invoked from 'git +pull': you are tracking an upstream repository, you have committed +no local changes, and now you want to update to a newer upstream +revision. In this case, a new commit is not needed to store the +combined history; instead, the `HEAD` (along with the index) is +updated to point at the named commit, without creating an extra +merge commit. -3. For conflicting paths, the index file records up to three - versions; stage1 stores the version from the common ancestor, - stage2 from `HEAD`, and stage3 from the remote branch (you +This behavior can be suppressed with the `--no-ff` option. + +TRUE MERGE +---------- + +Except in a fast-forward merge (see above), the branches to be +merged must be tied together by a merge commit that has both of them +as its parents. + +A merged version reconciling the changes from all branches to be +merged is committed, and your `HEAD`, index, and working tree are +updated to it. It is possible to have modifications in the working +tree as long as they do not overlap; the update will preserve them. + +When it is not obvious how to reconcile the changes, the following +happens: + +1. The `HEAD` pointer stays the same. +2. The `MERGE_HEAD` ref is set to point to the other branch head. +3. Paths that merged cleanly are updated both in the index file and + in your working tree. +4. For conflicting paths, the index file records up to three + versions: stage 1 stores the version from the common ancestor, + stage 2 from `HEAD`, and stage 3 from `MERGE_HEAD` (you can inspect the stages with `git ls-files -u`). The working tree files contain the result of the "merge" program; i.e. 3-way - merge results with familiar conflict markers `<<< === >>>`. - -4. No other changes are done. In particular, the local + merge results with familiar conflict markers `<<<` `===` `>>>`. +5. No other changes are made. In particular, the local modifications you had before you started merge will stay the same and the index entries for them stay as they were, i.e. matching `HEAD`. +If you tried a merge which resulted in complex conflicts and +want to start over, you can recover with `git reset --merge`. + HOW CONFLICTS ARE PRESENTED --------------------------- @@ -189,28 +208,30 @@ After seeing a conflict, you can do two things: * Decide not to merge. The only clean-ups you need are to reset the index file to the `HEAD` commit to reverse 2. and to clean - up working tree changes made by 2. and 3.; 'git-reset --hard' can + up working tree changes made by 2. and 3.; `git-reset --hard` can be used for this. * Resolve the conflicts. Git will mark the conflicts in the working tree. Edit the files into shape and - 'git-add' them to the index. Use 'git-commit' to seal the deal. + 'git add' them to the index. Use 'git commit' to seal the deal. You can work through the conflict with a number of tools: - * Use a mergetool. 'git mergetool' to launch a graphical + * Use a mergetool. `git mergetool` to launch a graphical mergetool which will work you through the merge. - * Look at the diffs. 'git diff' will show a three-way diff, - highlighting changes from both the HEAD and remote versions. + * Look at the diffs. `git diff` will show a three-way diff, + highlighting changes from both the `HEAD` and `MERGE_HEAD` + versions. - * Look at the diffs on their own. 'git log --merge -p <path>' - will show diffs first for the HEAD version and then the - remote version. + * Look at the diffs from each branch. `git log --merge -p <path>` + will show diffs first for the `HEAD` version and then the + `MERGE_HEAD` version. - * Look at the originals. 'git show :1:filename' shows the - common ancestor, 'git show :2:filename' shows the HEAD - version and 'git show :3:filename' shows the remote version. + * Look at the originals. `git show :1:filename` shows the + common ancestor, `git show :2:filename` shows the `HEAD` + version, and `git show :3:filename` shows the `MERGE_HEAD` + version. EXAMPLES @@ -245,6 +266,17 @@ changes into a merge commit. Small fixups like bumping release/version name would be acceptable. +include::merge-strategies.txt[] + +CONFIGURATION +------------- +include::merge-config.txt[] + +branch.<name>.mergeoptions:: + Sets default options for merging into branch <name>. The syntax and + supported options are the same as those of 'git merge', but option + values containing whitespace characters are currently not supported. + SEE ALSO -------- linkgit:git-fmt-merge-msg[1], linkgit:git-pull[1], diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 4a6f7f3a2d..55735faf7b 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -13,11 +13,11 @@ DESCRIPTION ----------- Use `git mergetool` to run one of several merge utilities to resolve -merge conflicts. It is typically run after 'git-merge'. +merge conflicts. It is typically run after 'git merge'. If one or more <file> parameters are given, the merge tool program will be run to resolve differences on each file. If no <file> names are -specified, 'git-mergetool' will run the merge tool program on every file +specified, 'git mergetool' will run the merge tool program on every file with merge conflicts. OPTIONS @@ -29,23 +29,23 @@ OPTIONS kdiff3, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, diffuse, tortoisemerge, opendiff, p4merge and araxis. + -If a merge resolution program is not specified, 'git-mergetool' +If a merge resolution program is not specified, 'git mergetool' will use the configuration variable `merge.tool`. If the -configuration variable `merge.tool` is not set, 'git-mergetool' +configuration variable `merge.tool` is not set, 'git mergetool' will pick a suitable default. + You can explicitly provide a full path to the tool by setting the configuration variable `mergetool.<tool>.path`. For example, you can configure the absolute path to kdiff3 by setting -`mergetool.kdiff3.path`. Otherwise, 'git-mergetool' assumes the +`mergetool.kdiff3.path`. Otherwise, 'git mergetool' assumes the tool is available in PATH. + Instead of running one of the known merge tool programs, -'git-mergetool' can be customized to run an alternative program +'git mergetool' can be customized to run an alternative program by specifying the command line to invoke in a configuration variable `mergetool.<tool>.cmd`. + -When 'git-mergetool' is invoked with this tool (either through the +When 'git mergetool' is invoked with this tool (either through the `-t` or `--tool` option or the `merge.tool` configuration variable) the configured command line will be invoked with `$BASE` set to the name of a temporary file containing the common base for @@ -59,7 +59,7 @@ merge resolution. If the custom merge tool correctly indicates the success of a merge resolution with its exit code, then the configuration variable `mergetool.<tool>.trustExitCode` can be set to `true`. -Otherwise, 'git-mergetool' will prompt the user to indicate the +Otherwise, 'git mergetool' will prompt the user to indicate the success of the resolution after the custom tool has exited. -y:: diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index 7ca8a7b48c..2108237c36 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -15,7 +15,7 @@ SYNOPSIS DESCRIPTION ----------- Finds symbolic names suitable for human digestion for revisions given in any -format parsable by 'git-rev-parse'. +format parsable by 'git rev-parse'. OPTIONS @@ -55,7 +55,7 @@ wrote you about that fantastic commit 33db5f4d9027a10e477ccf054b2c1ab94f74c85a. Of course, you look into the commit, but that only tells you what happened, but not the context. -Enter 'git-name-rev': +Enter 'git name-rev': ------------ % git name-rev 33db5f4d9027a10e477ccf054b2c1ab94f74c85a diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 94cceb1319..d4487cab52 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -8,7 +8,7 @@ git-notes - Add/inspect commit notes SYNOPSIS -------- [verse] -'git-notes' (edit [-F <file> | -m <msg>] | show) [commit] +'git notes' (edit [-F <file> | -m <msg>] | show) [commit] DESCRIPTION ----------- diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index f54d433d36..8ed09c0b3c 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -21,27 +21,28 @@ DESCRIPTION Reads list of objects from the standard input, and writes a packed archive with specified base-name, or to the standard output. -A packed archive is an efficient way to transfer set of objects -between two repositories, and also is an archival format which -is efficient to access. The packed archive format (.pack) is -designed to be self contained so that it can be unpacked without -any further information, but for fast, random access to the objects -in the pack, a pack index file (.idx) will be generated. - -Placing both in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or +A packed archive is an efficient way to transfer a set of objects +between two repositories as well as an access efficient archival +format. In a packed archive, an object is either stored as a +compressed whole or as a difference from some other object. +The latter is often called a delta. + +The packed archive format (.pack) is designed to be self-contained +so that it can be unpacked without any further information. Therefore, +each object that a delta depends upon must be present within the pack. + +A pack index file (.idx) is generated for fast, random access to the +objects in the pack. Placing both the index file (.idx) and the packed +archive (.pack) in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or any of the directories on $GIT_ALTERNATE_OBJECT_DIRECTORIES) -enables git to read from such an archive. +enables git to read from the pack archive. -The 'git-unpack-objects' command can read the packed archive and +The 'git unpack-objects' command can read the packed archive and expand the objects contained in the pack into "one-file one-object" format; this is typically done by the smart-pull commands when a pack is created on-the-fly for efficient network transport by their peers. -In a packed archive, an object is either stored as a compressed -whole, or as a difference from some other object. The latter is -often called a delta. - OPTIONS ------- @@ -61,7 +62,7 @@ base-name:: --revs:: Read the revision arguments from the standard input, instead of individual object names. The revision arguments are processed - the same way as 'git-rev-list' with the `--objects` flag + the same way as 'git rev-list' with the `--objects` flag uses its `commit` arguments to build the list of objects it outputs. The objects on the resulting list are packed. @@ -73,7 +74,7 @@ base-name:: --all:: This implies `--revs`. In addition to the list of revision arguments read from the standard input, pretend - as if all refs under `$GIT_DIR/refs` are specified to be + as if all refs under `refs/` are specified to be included. --include-tag:: @@ -105,26 +106,26 @@ base-name:: `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. +--max-pack-size=[N]:: + Maximum size of each output pack file. The size can be suffixed with + "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. The default is unlimited, unless the config variable `pack.packSizeLimit` is set. --honor-pack-keep:: This flag causes an object already in a local pack that - has a .keep file to be ignored, even if it appears in the - standard input. + has a .keep file to be ignored, even if it it would have + otherwise been packed. --incremental:: - This flag causes an object already in a pack ignored - even if it appears in the standard input. + This flag causes an object already in a pack to be ignored + even if it would have otherwise been packed. --local:: - This flag is similar to `--incremental`; instead of - ignoring all packed objects, it only ignores objects - that are packed and/or not in the local object store - (i.e. borrowed from an alternate). + This flag causes an object that is borrowed from an alternate + object store to be ignored even if it would have otherwise been + packed. --non-empty:: Only create a packed archive if it would contain at @@ -178,11 +179,21 @@ base-name:: Add --no-reuse-object if you want to force a uniform compression level on all data no matter the source. +--thin:: + Create a "thin" pack by omitting the common objects between a + sender and a receiver in order to reduce network transfer. This + option only makes sense in conjunction with --stdout. ++ +Note: A thin pack violates the packed archive format by omitting +required objects and is thus unusable by git without making it +self-contained. Use `git index-pack --fix-thin` +(see linkgit:git-index-pack[1]) to restore the self-contained property. + --delta-base-offset:: A packed archive can express base object of a delta as either 20-byte object name or as an offset in the stream, but older version of git does not understand the - latter. By default, 'git-pack-objects' only uses the + latter. By default, 'git pack-objects' only uses the former format for better compatibility. This option allows the command to use the latter format for compactness. Depending on the average delta chain diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt index 5f9435e59b..d0607879db 100644 --- a/Documentation/git-pack-redundant.txt +++ b/Documentation/git-pack-redundant.txt @@ -16,7 +16,7 @@ This program computes which packs in your repository are redundant. The output is suitable for piping to `xargs rm` if you are in the root of the repository. -'git-pack-redundant' accepts a list of objects on standard input. Any objects +'git pack-redundant' accepts a list of objects on standard input. Any objects given will be ignored when checking which packs are required. This makes the following command useful when wanting to remove packs which contain unreachable objects. diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt index 253fc0fc25..4dae1390a5 100644 --- a/Documentation/git-patch-id.txt +++ b/Documentation/git-patch-id.txt @@ -18,7 +18,7 @@ ID" are almost guaranteed to be the same thing. IOW, you can use this thing to look for likely duplicate commits. -When dealing with 'git-diff-tree' output, it takes advantage of +When dealing with 'git diff-tree' output, it takes advantage of the fact that the patch is prefixed with the object name of the commit, and outputs two 40-byte hexadecimal strings. The first string is the patch ID, and the second string is the commit ID. diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt index 8282a5e82b..87dacd797f 100644 --- a/Documentation/git-peek-remote.txt +++ b/Documentation/git-peek-remote.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -This command is deprecated; use 'git-ls-remote' instead. +This command is deprecated; use 'git ls-remote' instead. OPTIONS ------- diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index da6055d4b8..15cfb7a8dc 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -8,21 +8,21 @@ git-prune - Prune all unreachable objects from the object database SYNOPSIS -------- -'git-prune' [-n] [-v] [--expire <expire>] [--] [<head>...] +'git prune' [-n] [-v] [--expire <expire>] [--] [<head>...] DESCRIPTION ----------- -NOTE: In most cases, users should run 'git-gc', which calls -'git-prune'. See the section "NOTES", below. +NOTE: In most cases, users should run 'git gc', which calls +'git prune'. See the section "NOTES", below. -This runs 'git-fsck --unreachable' using all the refs -available in `$GIT_DIR/refs`, optionally with additional set of +This runs 'git fsck --unreachable' using all the refs +available in `refs/`, optionally with additional set of objects specified on the command line, and prunes all unpacked objects unreachable from any of these head objects from the object database. In addition, it prunes the unpacked objects that are also found in packs by -running 'git-prune-packed'. +running 'git prune-packed'. Note that unreachable, packed objects will remain. If this is not desired, see linkgit:git-repack[1]. @@ -62,12 +62,12 @@ $ git prune $(cd ../another && $(git rev-parse --all)) Notes ----- -In most cases, users will not need to call 'git-prune' directly, but -should instead call 'git-gc', which handles pruning along with +In most cases, users will not need to call 'git prune' directly, but +should instead call 'git gc', which handles pruning along with many other housekeeping tasks. For a description of which objects are considered for pruning, see -'git-fsck''s --unreachable option. +'git fsck''s --unreachable option. SEE ALSO -------- diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index b93201158f..31f42ea21a 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -13,16 +13,20 @@ SYNOPSIS DESCRIPTION ----------- -Runs 'git-fetch' with the given parameters, and calls 'git-merge' +Runs 'git fetch' with the given parameters, and calls 'git merge' to merge the retrieved head(s) into the current branch. -With `--rebase`, calls 'git-rebase' instead of 'git-merge'. +With `--rebase`, calls 'git rebase' instead of 'git merge'. Note that you can use `.` (current directory) as the <repository> to pull from the local repository -- this is useful when merging local branches into the current branch. -Also note that options meant for 'git-pull' itself and underlying -'git-merge' must be given before the options meant for 'git-fetch'. +Also note that options meant for 'git pull' itself and underlying +'git merge' must be given before the options meant for 'git fetch'. + +*Warning*: Running 'git pull' (actually, the underlying 'git merge') +with uncommitted changes is discouraged: while possible, it leaves you +in a state that is hard to back out of in the case of a conflict. OPTIONS ------- @@ -148,7 +152,7 @@ $ git merge origin/next If you tried a pull which resulted in a complex conflicts and -would want to start over, you can recover with 'git-reset'. +would want to start over, you can recover with 'git reset'. SEE ALSO diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index ab1bf99fdb..7a4e507c4b 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,8 +10,8 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [-v | --verbose] - [<repository> <refspec>...] + [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream] + [<repository> [<refspec>...]] DESCRIPTION ----------- @@ -69,11 +69,11 @@ nor in any Push line of the corresponding remotes file---see below). --all:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` be pushed. + refs under `refs/heads/` be pushed. --mirror:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/` (which includes but is not + refs under `refs/` (which includes but is not limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs @@ -91,8 +91,12 @@ nor in any Push line of the corresponding remotes file---see below). will be tab-separated and sent to stdout instead of stderr. The full symbolic names of the refs will be given. +--delete:: + All listed refs are deleted from the remote repository. This is + the same as prefixing all refs with a colon. + --tags:: - All refs under `$GIT_DIR/refs/tags` are pushed, in + All refs under `refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. @@ -112,7 +116,7 @@ nor in any Push line of the corresponding remotes file---see below). --repo=<repository>:: This option is only relevant if no <repository> argument is - passed in the invocation. In this case, 'git-push' derives the + passed in the invocation. In this case, 'git push' derives the remote name from the current branch: If it tracks a remote branch, then that remote repository is pushed to. Otherwise, the name "origin" is used. For this latter case, this option @@ -126,13 +130,21 @@ git push --repo=public #2 + is that #1 always pushes to "public" whereas #2 pushes to "public" only if the current branch does not track a remote branch. This is -useful if you write an alias or script around 'git-push'. +useful if you write an alias or script around 'git push'. + +-u:: +--set-upstream:: + For every branch that is up to date or successfully pushed, add + upstream (tracking) reference, used by argument-less + linkgit:git-pull[1] and other commands. For more information, + see 'branch.<name>.merge' in linkgit:git-config[1]. --thin:: --no-thin:: - These options are passed to 'git-send-pack'. Thin - transfer spends extra cycles to minimize the number of - objects to be sent and meant to be used on slower connection. + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. -v:: --verbose:: diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index a10ce4ba40..f6037c4f6a 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- 'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u [--exclude-per-directory=<gitignore>] | -i]] - [--index-output=<file>] + [--index-output=<file>] [--no-sparse-checkout] <tree-ish1> [<tree-ish2> [<tree-ish3>]] @@ -25,8 +25,8 @@ fast-forward (i.e. 2-way) merge, or a 3-way merge, with the `-m` flag. When used with `-m`, the `-u` flag causes it to also update the files in the work tree with the result of the merge. -Trivial merges are done by 'git-read-tree' itself. Only conflicting paths -will be in unmerged state when 'git-read-tree' returns. +Trivial merges are done by 'git read-tree' itself. Only conflicting paths +will be in unmerged state when 'git read-tree' returns. OPTIONS ------- @@ -57,13 +57,13 @@ OPTIONS Show the progress of checking files out. --trivial:: - Restrict three-way merge by 'git-read-tree' to happen + Restrict three-way merge by 'git read-tree' to happen only if there is no file-level merging required, instead of resolving merge for trivial cases and leaving conflicting files unresolved in the index. --aggressive:: - Usually a three-way merge by 'git-read-tree' resolves + Usually a three-way merge by 'git read-tree' resolves the merge for really trivial cases and leaves other cases unresolved in the index, so that Porcelains can implement different merge policies. This flag makes the @@ -110,13 +110,17 @@ OPTIONS directories the index file and index output file are located in. +--no-sparse-checkout:: + Disable sparse checkout support even if `core.sparseCheckout` + is true. + <tree-ish#>:: The id of the tree object(s) to be read/merged. Merging ------- -If `-m` is specified, 'git-read-tree' can perform 3 kinds of +If `-m` is specified, 'git read-tree' can perform 3 kinds of merge, a single tree merge if only 1 tree is given, a fast-forward merge with 2 trees, or a 3-way merge if 3 trees are provided. @@ -124,18 +128,18 @@ provided. Single Tree Merge ~~~~~~~~~~~~~~~~~ -If only 1 tree is specified, 'git-read-tree' operates as if the user did not +If only 1 tree is specified, 'git read-tree' operates as if the user did not specify `-m`, except that if the original index has an entry for a -given pathname, and the contents of the path matches with the tree +given pathname, and the contents of the path match with the tree being read, the stat info from the index is used. (In other words, the index's stat()s take precedence over the merged tree's). That means that if you do a `git read-tree -m <newtree>` followed by a -`git checkout-index -f -u -a`, the 'git-checkout-index' only checks out +`git checkout-index -f -u -a`, the 'git checkout-index' only checks out the stuff that really changed. -This is used to avoid unnecessary false hits when 'git-diff-files' is -run after 'git-read-tree'. +This is used to avoid unnecessary false hits when 'git diff-files' is +run after 'git read-tree'. Two Tree Merge @@ -146,44 +150,46 @@ is the head commit of the current repository, and $M is the head of a foreign tree, which is simply ahead of $H (i.e. we are in a fast-forward situation). -When two trees are specified, the user is telling 'git-read-tree' +When two trees are specified, the user is telling 'git read-tree' the following: 1. The current index and work tree is derived from $H, but - the user may have local changes in them since $H; + the user may have local changes in them since $H. 2. The user wants to fast-forward to $M. In this case, the `git read-tree -m $H $M` command makes sure that no local change is lost as the result of this "merge". -Here are the "carry forward" rules: +Here are the "carry forward" rules, where "I" denotes the index, +"clean" means that index and work tree coincide, and "exists"/"nothing" +refer to the presence of a path in the specified commit: - I (index) H M Result + I H M Result ------------------------------------------------------- - 0 nothing nothing nothing (does not happen) - 1 nothing nothing exists use M - 2 nothing exists nothing remove path from index - 3 nothing exists exists, use M if "initial checkout" + 0 nothing nothing nothing (does not happen) + 1 nothing nothing exists use M + 2 nothing exists nothing remove path from index + 3 nothing exists exists, use M if "initial checkout", H == M keep index otherwise - exists fail + exists, fail H != M clean I==H I==M ------------------ - 4 yes N/A N/A nothing nothing keep index - 5 no N/A N/A nothing nothing keep index + 4 yes N/A N/A nothing nothing keep index + 5 no N/A N/A nothing nothing keep index - 6 yes N/A yes nothing exists keep index - 7 no N/A yes nothing exists keep index - 8 yes N/A no nothing exists fail - 9 no N/A no nothing exists fail + 6 yes N/A yes nothing exists keep index + 7 no N/A yes nothing exists keep index + 8 yes N/A no nothing exists fail + 9 no N/A no nothing exists fail 10 yes yes N/A exists nothing remove path from index 11 no yes N/A exists nothing fail 12 yes no N/A exists nothing fail 13 no no N/A exists nothing fail - clean (H=M) + clean (H==M) ------ 14 yes exists exists keep index 15 no exists exists keep index @@ -198,26 +204,26 @@ Here are the "carry forward" rules: 21 no yes no exists exists fail In all "keep index" cases, the index entry stays as in the -original index file. If the entry were not up to date, -'git-read-tree' keeps the copy in the work tree intact when +original index file. If the entry is not up to date, +'git read-tree' keeps the copy in the work tree intact when operating under the -u flag. -When this form of 'git-read-tree' returns successfully, you can -see what "local changes" you made are carried forward by running +When this form of 'git read-tree' returns successfully, you can +see which of the "local changes" that you made were carried forward by running `git diff-index --cached $M`. Note that this does not -necessarily match `git diff-index --cached $H` would have +necessarily match what `git diff-index --cached $H` would have produced before such a two tree merge. This is because of cases 18 and 19 --- if you already had the changes in $M (e.g. maybe you picked it up via e-mail in a patch form), `git diff-index --cached $H` would have told you about the change before this merge, but it would not show in `git diff-index --cached $M` -output after two-tree merge. +output after the two-tree merge. -Case #3 is slightly tricky and needs explanation. The result from this +Case 3 is slightly tricky and needs explanation. The result from this rule logically should be to remove the path if the user staged the removal of the path and then switching to a new branch. That however will prevent the initial checkout from happening, so the rule is modified to use M (new -tree) only when the contents of the index is empty. Otherwise the removal +tree) only when the content of the index is empty. Otherwise the removal of the path is kept as long as $H and $M are the same. 3-Way Merge @@ -225,7 +231,7 @@ of the path is kept as long as $H and $M are the same. Each "index" entry has two bits worth of "stage" state. stage 0 is the normal one, and is the only one you'd see in any kind of normal use. -However, when you do 'git-read-tree' with three trees, the "stage" +However, when you do 'git read-tree' with three trees, the "stage" starts out at 1. This means that you can do @@ -241,7 +247,7 @@ branch into the current branch, we use the common ancestor tree as <tree1>, the current branch head as <tree2>, and the other branch head as <tree3>. -Furthermore, 'git-read-tree' has special-case logic that says: if you see +Furthermore, 'git read-tree' has special-case logic that says: if you see a file that matches in all respects in the following states, it "collapses" back to "stage0": @@ -257,7 +263,7 @@ a file that matches in all respects in the following states, it - stage 1 and stage 3 are the same and stage 2 is different take stage 2 (we did something while they did nothing) -The 'git-write-tree' command refuses to write a nonsensical tree, and it +The 'git write-tree' command refuses to write a nonsensical tree, and it will complain about unmerged entries if it sees a single entry that is not stage 0. @@ -273,7 +279,7 @@ start a 3-way merge with an index file that is already populated. Here is an outline of how the algorithm works: - if a file exists in identical format in all three trees, it will - automatically collapse to "merged" state by 'git-read-tree'. + automatically collapse to "merged" state by 'git read-tree'. - a file that has _any_ difference what-so-ever in the three trees will stay as separate entries in the index. It's up to "porcelain @@ -297,8 +303,8 @@ populated. Here is an outline of how the algorithm works: matching "stage1" entry if it exists too. .. all the normal trivial rules .. -You would normally use 'git-merge-index' with supplied -'git-merge-one-file' to do this last step. The script updates +You would normally use 'git merge-index' with supplied +'git merge-one-file' to do this last step. The script updates the files in the working tree as it merges each path and at the end of a successful merge. @@ -320,7 +326,7 @@ $ JC=`git rev-parse --verify "HEAD^0"` $ git checkout-index -f -u -a $JC ---------------- -You do random edits, without running 'git-update-index'. And then +You do random edits, without running 'git update-index'. And then you notice that the tip of your "upstream" tree has advanced since you pulled from him: @@ -346,20 +352,66 @@ your work-in-progress changes, and your work tree would be updated to the result of the merge. However, if you have local changes in the working tree that -would be overwritten by this merge, 'git-read-tree' will refuse +would be overwritten by this merge, 'git read-tree' will refuse to run to prevent your changes from being lost. In other words, there is no need to worry about what exists only in the working tree. When you have local changes in a part of the project that is not involved in the merge, your changes do not interfere with the merge, and are kept intact. When they -*do* interfere, the merge does not even start ('git-read-tree' +*do* interfere, the merge does not even start ('git read-tree' complains loudly and fails without modifying anything). In such a case, you can simply continue doing what you were in the middle of doing, and when your working tree is ready (i.e. you have finished your work-in-progress), attempt the merge again. +Sparse checkout +--------------- + +"Sparse checkout" allows to sparsely populate working directory. +It uses skip-worktree bit (see linkgit:git-update-index[1]) to tell +Git whether a file on working directory is worth looking at. + +"git read-tree" and other merge-based commands ("git merge", "git +checkout"...) can help maintaining skip-worktree bitmap and working +directory update. `$GIT_DIR/info/sparse-checkout` is used to +define the skip-worktree reference bitmap. When "git read-tree" needs +to update working directory, it will reset skip-worktree bit in index +based on this file, which uses the same syntax as .gitignore files. +If an entry matches a pattern in this file, skip-worktree will be +set on that entry. Otherwise, skip-worktree will be unset. + +Then it compares the new skip-worktree value with the previous one. If +skip-worktree turns from unset to set, it will add the corresponding +file back. If it turns from set to unset, that file will be removed. + +While `$GIT_DIR/info/sparse-checkout` is usually used to specify what +files are in. You can also specify what files are _not_ in, using +negate patterns. For example, to remove file "unwanted": + +---------------- +* +!unwanted +---------------- + +Another tricky thing is fully repopulating working directory when you +no longer want sparse checkout. You cannot just disable "sparse +checkout" because skip-worktree are still in the index and you working +directory is still sparsely populated. You should re-populate working +directory with the `$GIT_DIR/info/sparse-checkout` file content as +follows: + +---------------- +* +---------------- + +Then you can disable sparse checkout. Sparse checkout support in "git +read-tree" and similar commands is disabled by default. You need to +turn `core.sparseCheckout` on in order to have sparse checkout +support. + + SEE ALSO -------- linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index ca5e1e8653..823f2a4638 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -17,7 +17,7 @@ SYNOPSIS DESCRIPTION ----------- -If <branch> is specified, 'git-rebase' will perform an automatic +If <branch> is specified, 'git rebase' will perform an automatic `git checkout <branch>` before doing anything else. Otherwise it remains on the current branch. @@ -170,8 +170,8 @@ This is useful if F and G were flawed in some way, or should not be part of topicA. Note that the argument to --onto and the <upstream> parameter can be any valid commit-ish. -In case of conflict, 'git-rebase' will stop at the first problematic commit -and leave conflict markers in the tree. You can use 'git-diff' to locate +In case of conflict, 'git rebase' will stop at the first problematic commit +and leave conflict markers in the tree. You can use 'git diff' to locate the markers (<<<<<<) and make edits to resolve the conflict. For each file you edit, you need to tell git that the conflict has been resolved, typically this would be done with @@ -187,7 +187,7 @@ desired resolution, you can continue the rebasing process with git rebase --continue -Alternatively, you can undo the 'git-rebase' with +Alternatively, you can undo the 'git rebase' with git rebase --abort @@ -238,10 +238,10 @@ other words, the sides are swapped. -s <strategy>:: --strategy=<strategy>:: Use the given merge strategy. - If there is no `-s` option 'git-merge-recursive' is used + If there is no `-s` option 'git merge-recursive' is used instead. This implies --merge. + -Because 'git-rebase' replays each commit from the working branch +Because 'git rebase' replays each commit from the working branch on top of the <upstream> branch using the given strategy, using the 'ours' strategy simply discards all patches from the <branch>, which makes little sense. @@ -280,13 +280,13 @@ which makes little sense. --ignore-whitespace:: --whitespace=<option>:: - These flag are passed to the 'git-apply' program + These flag are passed to the 'git apply' program (see linkgit:git-apply[1]) that applies the patch. Incompatible with the --interactive option. --committer-date-is-author-date:: --ignore-date:: - These flags are passed to 'git-am' to easily change the dates + These flags are passed to 'git am' to easily change the dates of the rebased commits (see linkgit:git-am[1]). -i:: @@ -308,12 +308,22 @@ which makes little sense. root commits will be rewritten to have <newbase> as parent instead. +--autosquash:: + When the commit log message begins with "squash! ..." (or + "fixup! ..."), and there is a commit whose title begins with + the same ..., automatically modify the todo list of rebase -i + so that the commit marked for squashing comes right after the + commit to be modified, and change the action of the moved + commit from `pick` to `squash` (or `fixup`). ++ +This option is only valid when '--interactive' option is used. + include::merge-strategies.txt[] NOTES ----- -You should understand the implications of using 'git-rebase' on a +You should understand the implications of using 'git rebase' on a repository that you share. See also RECOVERING FROM UPSTREAM REBASE below. @@ -369,12 +379,12 @@ pick fa1afe1 The oneline of the next commit ... ------------------------------------------- -The oneline descriptions are purely for your pleasure; 'git-rebase' will +The oneline descriptions are purely for your pleasure; 'git rebase' will not look at them but at the commit names ("deadbee" and "fa1afe1" in this example), so do not delete or edit the names. By replacing the command "pick" with the command "edit", you can tell -'git-rebase' to stop after applying that commit, so that you can edit +'git rebase' to stop after applying that commit, so that you can edit the files and/or the commit message, amend the commit, and continue rebasing. @@ -382,17 +392,20 @@ If you just want to edit the commit message for a commit, replace the command "pick" with the command "reword". If you want to fold two or more commits into one, replace the command -"pick" with "squash" for the second and subsequent commit. If the -commits had different authors, it will attribute the squashed commit to -the author of the first commit. - -'git-rebase' will stop when "pick" has been replaced with "edit" or +"pick" for the second and subsequent commits with "squash" or "fixup". +If the commits had different authors, the folded commit will be +attributed to the author of the first commit. The suggested commit +message for the folded commit is the concatenation of the commit +messages of the first commit and of those with the "squash" command, +but omits the commit messages of commits with the "fixup" command. + +'git rebase' will stop when "pick" has been replaced with "edit" or when a command fails due to merge errors. When you are done editing and/or resolving conflicts you can continue with `git rebase --continue`. For example, if you want to reorder the last 5 commits, such that what was HEAD~4 becomes the new HEAD. To achieve that, you would call -'git-rebase' like this: +'git rebase' like this: ---------------------- $ git rebase -i HEAD~5 @@ -422,7 +435,7 @@ SPLITTING COMMITS ----------------- In interactive mode, you can mark commits with the action "edit". However, -this does not necessarily mean that 'git-rebase' expects the result of this +this does not necessarily mean that 'git rebase' expects the result of this edit to be exactly one commit. Indeed, you can undo the commit, or you can add other commits. This can be used to split a commit into two: @@ -438,7 +451,7 @@ add other commits. This can be used to split a commit into two: - Now add the changes to the index that you want to have in the first commit. You can use `git add` (possibly interactively) or - 'git-gui' (or both) to do that. + 'git gui' (or both) to do that. - Commit the now-current index with whatever commit message is appropriate now. @@ -449,7 +462,7 @@ add other commits. This can be used to split a commit into two: If you are not absolutely sure that the intermediate revisions are consistent (they compile, pass the testsuite, etc.) you should use -'git-stash' to stash away the not-yet-committed changes +'git stash' to stash away the not-yet-committed changes after each commit, test, and amend the commit if fixes are necessary. @@ -512,8 +525,8 @@ Easy case: The changes are literally the same.:: Hard case: The changes are not the same.:: This happens if the 'subsystem' rebase had conflicts, or used - `\--interactive` to omit, edit, or squash commits; or if the - upstream used one of `commit \--amend`, `reset`, or + `\--interactive` to omit, edit, squash, or fixup commits; or + if the upstream used one of `commit \--amend`, `reset`, or `filter-branch`. @@ -524,7 +537,7 @@ Only works if the changes (patch IDs based on the diff contents) on 'subsystem' are literally the same before and after the rebase 'subsystem' did. -In that case, the fix is easy because 'git-rebase' knows to skip +In that case, the fix is easy because 'git rebase' knows to skip changes that are already present in the new upstream. So if you say (assuming you're on 'topic') ------------ @@ -551,12 +564,12 @@ NOTE: While an "easy case recovery" sometimes appears to be successful example, a commit that was removed via `git rebase \--interactive` will be **resurrected**! -The idea is to manually tell 'git-rebase' "where the old 'subsystem' +The idea is to manually tell 'git rebase' "where the old 'subsystem' ended and your 'topic' began", that is, what the old merge-base between them was. You will have to find a way to name the last commit of the old 'subsystem', for example: -* With the 'subsystem' reflog: after 'git-fetch', the old tip of +* With the 'subsystem' reflog: after 'git fetch', the old tip of 'subsystem' is at `subsystem@\{1}`. Subsequent fetches will increase the number. (See linkgit:git-reflog[1].) diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index cb5f405280..2790eebaff 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -8,15 +8,15 @@ git-receive-pack - Receive what is pushed into the repository SYNOPSIS -------- -'git receive-pack' <directory> +'git-receive-pack' <directory> DESCRIPTION ----------- -Invoked by 'git-send-pack' and updates the repository with the +Invoked by 'git send-pack' and updates the repository with the information fed from the remote end. This command is usually not invoked directly by the end user. -The UI for the protocol is on the 'git-send-pack' side, and the +The UI for the protocol is on the 'git send-pack' side, and the program pair is meant to be used to push updates to remote repository. For pull operations, see linkgit:git-fetch-pack[1]. diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 6b44ee19e9..4eaa62b691 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -58,7 +58,7 @@ OPTIONS refs. + This computation involves traversing all the reachable objects, i.e. it -has the same cost as 'git-prune'. Fortunately, once this is run, we +has the same cost as 'git prune'. Fortunately, once this is run, we should not have to ever worry about missing objects, because the current prune and pack-objects know about reflogs and protect objects referred by them. diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 8beb42dbb9..1b5f61aa0b 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -25,7 +25,10 @@ Commands are given by the caller on the helper's standard input, one per line. 'capabilities':: Lists the capabilities of the helper, one per line, ending - with a blank line. + with a blank line. Each capability may be preceded with '*'. + This marks them mandatory for git version using the remote + helper to understand (unknown mandatory capability is fatal + error). 'list':: Lists the refs, one per line, in the format "<value> <name> @@ -79,6 +82,31 @@ style string if it contains an LF. + Supported if the helper has the "push" capability. +'import' <name>:: + Produces a fast-import stream which imports the current value + of the named ref. It may additionally import other refs as + needed to construct the history efficiently. The script writes + to a helper-specific private namespace. The value of the named + ref should be written to a location in this namespace derived + by applying the refspecs from the "refspec" capability to the + name of the ref. ++ +Supported if the helper has the "import" capability. + +'connect' <service>:: + Connects to given service. Standard input and standard output + of helper are connected to specified service (git prefix is + included in service name so e.g. fetching uses 'git-upload-pack' + as service) on remote side. Valid replies to this command are + empty line (connection established), 'fallback' (no smart + transport support, fall back to dumb transports) and just + exiting with error message printed (can't connect, don't + bother trying to fall back). After line feed terminating the + positive (empty) response, the output of service starts. After + the connection ends, the remote helper exits. ++ +Supported if the helper has the "connect" capability. + If a fatal error occurs, the program writes the error message to stderr and exits. The caller should expect that a suitable error message has been printed if the child closes the connection without @@ -99,6 +127,22 @@ CAPABILITIES 'push':: This helper supports the 'push' command. +'import':: + This helper supports the 'import' command. + +'refspec' 'spec':: + When using the import command, expect the source ref to have + been written to the destination ref. The earliest applicable + refspec takes precedence. For example + "refs/heads/*:refs/svn/origin/branches/*" means that, after an + "import refs/heads/name", the script has written to + refs/svn/origin/branches/name. If this capability is used at + all, it must cover all refs reported by the list command; if + it is not used, it is effectively "*:*" + +'connect':: + This helper supports the 'connect' command. + REF LIST ATTRIBUTES ------------------- @@ -107,6 +151,10 @@ REF LIST ATTRIBUTES commands. A helper might chose to acquire the ref list by opening a different type of connection to the destination. +'unchanged':: + This ref is unchanged since the last import or fetch, although + the helper cannot necessarily determine what value that produced. + OPTIONS ------- 'option verbosity' <N>:: @@ -137,9 +185,15 @@ OPTIONS but don't actually change any repository data. For most helpers this only applies to the 'push', if supported. +'option servpath <c-style-quoted-path>':: + Set service path (--upload-pack, --receive-pack etc.) for + next connect. Remote helper MAY support this option. Remote + helper MUST NOT rely on this option being set before + connect request occurs. + Documentation ------------- -Documentation by Daniel Barkalow. +Documentation by Daniel Barkalow and Ilari Liusvaara GIT --- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index c272c92d4b..3fc599c0c7 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -14,6 +14,9 @@ SYNOPSIS 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) +'git remote set-url' [--push] <name> <newurl> [<oldurl>] +'git remote set-url --add' [--push] <name> <newurl> +'git remote set-url --delete' [--push] <name> <url> 'git remote' [-v | --verbose] 'show' [-n] <name> 'git remote prune' [-n | --dry-run] <name> 'git remote' [-v | --verbose] 'update' [-p | --prune] [group | remote]... @@ -101,6 +104,20 @@ remote set-head origin master" will set `$GIT_DIR/refs/remotes/origin/HEAD` to `refs/remotes/origin/master` already exists; if not it must be fetched first. + +'set-url':: + +Changes URL remote points to. Sets first URL remote points to matching +regex <oldurl> (first URL if no <oldurl> is given) to <newurl>. If +<oldurl> doesn't match any URL, error occurs and nothing is changed. ++ +With '--push', push URLs are manipulated instead of fetch URLs. ++ +With '--add', instead of changing some URL, new URL is added. ++ +With '--delete', instead of changing some URL, all URLs matching +regex <url> are deleted. Trying to delete all non-push URLs is an +error. + 'show':: Gives some information about the remote <name>. @@ -161,7 +178,7 @@ $ git checkout -b nfs linux-nfs/master ... ------------ -* Imitate 'git-clone' but track only selected branches +* Imitate 'git clone' but track only selected branches + ------------ $ mkdir project.git diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index c9257a10c9..8c67d1724f 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -49,16 +49,16 @@ other objects in that pack they already have locally. deleted by way of being left in the old pack and then removed. Instead, the loose unreachable objects will be pruned according to normal expiry rules - with the next 'git-gc' invocation. See linkgit:git-gc[1]. + with the next 'git gc' invocation. See linkgit:git-gc[1]. -d:: After packing, if the newly created packs make some existing packs redundant, remove the redundant packs. - Also run 'git-prune-packed' to remove redundant + Also run 'git prune-packed' to remove redundant loose object files. -l:: - Pass the `--local` option to 'git-pack-objects'. See + Pass the `--local` option to 'git pack-objects'. See linkgit:git-pack-objects[1]. -f:: @@ -66,12 +66,12 @@ other objects in that pack they already have locally. linkgit:git-pack-objects[1]. -q:: - Pass the `-q` option to 'git-pack-objects'. See + Pass the `-q` option to 'git pack-objects'. See linkgit:git-pack-objects[1]. -n:: Do not update the server information with - 'git-update-server-info'. This option skips + 'git update-server-info'. This option skips updating local catalog files needed to publish this repository (or a direct copy of it) over HTTP or FTP. See linkgit:git-update-server-info[1]. @@ -98,24 +98,26 @@ other objects in that pack they already have locally. `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. +--max-pack-size=[N]:: + Maximum size of each output pack file. The size can be suffixed with + "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. - The default is unlimited. + The default is unlimited, unless the config variable + `pack.packSizeLimit` is set. Configuration ------------- -When configuration variable `repack.UseDeltaBaseOffset` is set -for the repository, the command passes `--delta-base-offset` -option to 'git-pack-objects'; this typically results in slightly -smaller packs, but the generated packs are incompatible with -versions of git older than (and including) v1.4.3; do not set -the variable in a repository that older version of git needs to -be able to read (this includes repositories from which packs can -be copied out over http or rsync, and people who obtained packs -that way can try to use older git with it). +By default, the command passes `--delta-base-offset` option to +'git pack-objects'; this typically results in slightly smaller packs, +but the generated packs are incompatible with versions of Git older than +version 1.4.4. If you need to share your repository with such ancient Git +versions, either directly or via the dumb http or rsync protocol, then you +need to set the configuration variable `repack.UseDeltaBaseOffset` to +"false" and repack. Access from old Git versions over the native protocol +is unaffected by this option as the conversion is performed on the fly +as needed in that case. Author diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index 65a0da508a..fde2092582 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -65,7 +65,7 @@ OPTIONS BUGS ---- Comparing blobs or trees that have been replaced with those that -replace them will not work properly. And using 'git reset --hard' to +replace them will not work properly. And using `git reset --hard` to go back to a replaced commit will move the branch to the replacement commit instead of the replaced commit. diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index 7dd515b8cc..acc220a00f 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -30,14 +30,14 @@ enable this command. COMMANDS -------- -Normally, 'git-rerere' is run without arguments or user-intervention. +Normally, 'git rerere' is run without arguments or user-intervention. However, it has several commands that allow it to interact with its working state. 'clear':: This resets the metadata used by rerere if a merge resolution is to be -aborted. Calling 'git-am [--skip|--abort]' or 'git-rebase [--skip|--abort]' +aborted. Calling 'git am [--skip|--abort]' or 'git rebase [--skip|--abort]' will automatically invoke this command. 'diff':: @@ -142,32 +142,32 @@ finally ready and merged into the master branch. This merge would require you to resolve the conflict, introduced by the commits marked with `*`. However, this conflict is often the same conflict you resolved when you created the test merge you -blew away. 'git-rerere' helps you resolve this final +blew away. 'git rerere' helps you resolve this final conflicted merge using the information from your earlier hand resolve. -Running the 'git-rerere' command immediately after a conflicted +Running the 'git rerere' command immediately after a conflicted automerge records the conflicted working tree files, with the usual conflict markers `<<<<<<<`, `=======`, and `>>>>>>>` in them. Later, after you are done resolving the conflicts, -running 'git-rerere' again will record the resolved state of these +running 'git rerere' again will record the resolved state of these files. Suppose you did this when you created the test merge of master into the topic branch. Next time, after seeing the same conflicted automerge, -running 'git-rerere' will perform a three-way merge between the +running 'git rerere' will perform a three-way merge between the earlier conflicted automerge, the earlier manual resolution, and the current conflicted automerge. If this three-way merge resolves cleanly, the result is written out to your working tree file, so you do not have to manually -resolve it. Note that 'git-rerere' leaves the index file alone, +resolve it. Note that 'git rerere' leaves the index file alone, so you still need to do the final sanity checks with `git diff` -(or `git diff -c`) and 'git-add' when you are satisfied. +(or `git diff -c`) and 'git add' when you are satisfied. -As a convenience measure, 'git-merge' automatically invokes -'git-rerere' upon exiting with a failed automerge and 'git-rerere' +As a convenience measure, 'git merge' automatically invokes +'git rerere' upon exiting with a failed automerge and 'git rerere' records the hand resolve when it is a new conflict, or reuses the earlier hand -resolve when it is not. 'git-commit' also invokes 'git-rerere' +resolve when it is not. 'git commit' also invokes 'git rerere' when committing a merge result. What this means is that you do not have to do anything special yourself (besides enabling the rerere.enabled config variable). @@ -177,8 +177,8 @@ resolution is recorded, and it will be reused when you do the actual merge later with the updated master and topic branch, as long as the recorded resolution is still applicable. -The information 'git-rerere' records is also used when running -'git-rebase'. After blowing away the test merge and continuing +The information 'git rerere' records is also used when running +'git rebase'. After blowing away the test merge and continuing development on the topic branch: ------------ @@ -197,7 +197,7 @@ you could run `git rebase master topic`, to bring yourself up-to-date before your topic is ready to be sent upstream. This would result in falling back to a three-way merge, and it would conflict the same way as the test merge you resolved earlier. -'git-rerere' will be run by 'git-rebase' to help you resolve this +'git rerere' will be run by 'git rebase' to help you resolve this conflict. diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 2d27e405a3..168db08627 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -39,7 +39,7 @@ OPTIONS --soft:: Does not touch the index file nor the working tree at all, but requires them to be in a good order. This leaves all your changed - files "Changes to be committed", as 'git-status' would + files "Changes to be committed", as 'git status' would put it. --hard:: @@ -62,11 +62,101 @@ This means that `git reset -p` is the opposite of `git add -p` (see linkgit:git-add[1]). -q:: +--quiet:: Be quiet, only report errors. <commit>:: Commit to make the current HEAD. If not given defaults to HEAD. +DISCUSSION +---------- + +The tables below show what happens when running: + +---------- +git reset --option target +---------- + +to reset the HEAD to another commit (`target`) with the different +reset options depending on the state of the files. + +In these tables, A, B, C and D are some different states of a +file. For example, the first line of the first table means that if a +file is in state A in the working tree, in state B in the index, in +state C in HEAD and in state D in the target, then "git reset --soft +target" will put the file in state A in the working tree, in state B +in the index and in state D in HEAD. + + working index HEAD target working index HEAD + ---------------------------------------------------- + A B C D --soft A B D + --mixed A D D + --hard D D D + --merge (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + A B C C --soft A B C + --mixed A C C + --hard C C C + --merge (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + B B C D --soft B B D + --mixed B D D + --hard D D D + --merge D D D + + working index HEAD target working index HEAD + ---------------------------------------------------- + B B C C --soft B B C + --mixed B C C + --hard C C C + --merge C C C + + working index HEAD target working index HEAD + ---------------------------------------------------- + B C C D --soft B C D + --mixed B D D + --hard D D D + --merge (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + B C C C --soft B C C + --mixed B C C + --hard C C C + --merge B C C + +"reset --merge" is meant to be used when resetting out of a conflicted +merge. Any mergy operation guarantees that the work tree file that is +involved in the merge does not have local change wrt the index before +it starts, and that it writes the result out to the work tree. So if +we see some difference between the index and the target and also +between the index and the work tree, then it means that we are not +resetting out from a state that a mergy operation left after failing +with a conflict. That is why we disallow --merge option in this case. + +The following tables show what happens when there are unmerged +entries: + + working index HEAD target working index HEAD + ---------------------------------------------------- + X U A B --soft (disallowed) + --mixed X B B + --hard B B B + --merge B B B + + working index HEAD target working index HEAD + ---------------------------------------------------- + X U A A --soft (disallowed) + --mixed X A A + --hard A A A + --merge A A A + +X means any state and U means an unmerged index. + Examples -------- diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 3341d1b62f..173f3fc785 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -9,7 +9,7 @@ git-rev-list - Lists commit objects in reverse chronological order SYNOPSIS -------- [verse] -'git-rev-list' [ \--max-count=number ] +'git rev-list' [ \--max-count=number ] [ \--skip=number ] [ \--max-age=timestamp ] [ \--min-age=timestamp ] @@ -21,9 +21,10 @@ SYNOPSIS [ \--full-history ] [ \--not ] [ \--all ] - [ \--branches ] - [ \--tags ] - [ \--remotes ] + [ \--branches[=pattern] ] + [ \--tags[=pattern] ] + [ \--remotes[=pattern] ] + [ \--glob=glob-pattern ] [ \--stdin ] [ \--quiet ] [ \--topo-order ] @@ -93,8 +94,8 @@ between the two operands. The following two commands are equivalent: 'rev-list' is a very essential git command, since it provides the ability to build and traverse commit ancestry graphs. For this reason, it has a lot of different options that enables it to be -used by commands as different as 'git-bisect' and -'git-repack'. +used by commands as different as 'git bisect' and +'git repack'. OPTIONS ------- diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 82045a2522..8db600f6ba 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -15,16 +15,16 @@ DESCRIPTION Many git porcelainish commands take mixture of flags (i.e. parameters that begin with a dash '-') and parameters -meant for the underlying 'git-rev-list' command they use internally +meant for the underlying 'git rev-list' command they use internally and flags and parameters for the other commands they use -downstream of 'git-rev-list'. This command is used to +downstream of 'git rev-list'. This command is used to distinguish between them. OPTIONS ------- --parseopt:: - Use 'git-rev-parse' in option parsing mode (see PARSEOPT section below). + Use 'git rev-parse' in option parsing mode (see PARSEOPT section below). --keep-dashdash:: Only meaningful in `--parseopt` mode. Tells the option parser to echo @@ -33,20 +33,20 @@ OPTIONS --stop-at-non-option:: Only meaningful in `--parseopt` mode. Lets the option parser stop at the first non-option argument. This can be used to parse sub-commands - that take options themself. + that take options themselves. --sq-quote:: - Use 'git-rev-parse' in shell quoting mode (see SQ-QUOTE + Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE section below). In contrast to the `--sq` option below, this mode does only quoting. Nothing else is done to command input. --revs-only:: Do not output flags and parameters not meant for - 'git-rev-list' command. + 'git rev-list' command. --no-revs:: Do not output flags and parameters meant for - 'git-rev-list' command. + 'git rev-list' command. --flags:: Do not output non-flag parameters. @@ -74,7 +74,7 @@ OPTIONS properly quoted for consumption by shell. Useful when you expect your parameter to contain whitespaces and newlines (e.g. when using pickaxe `-S` with - 'git-diff-\*'). In contrast to the `--sq-quote` option, + 'git diff-\*'). In contrast to the `--sq-quote` option, the command input is still interpreted as usual. --not:: @@ -101,16 +101,28 @@ OPTIONS abbreviation mode. --all:: - Show all refs found in `$GIT_DIR/refs`. - ---branches:: - Show branch refs found in `$GIT_DIR/refs/heads`. + Show all refs found in `refs/`. + +--branches[=pattern]:: +--tags[=pattern]:: +--remotes[=pattern]:: + Show all branches, tags, or remote-tracking branches, + respectively (i.e., refs found in `refs/heads`, + `refs/tags`, or `refs/remotes`, respectively). ++ +If a `pattern` is given, only refs matching the given shell glob are +shown. If the pattern does not contain a globbing character (`?`, +`\*`, or `[`), it is turned into a prefix match by appending `/\*`. ---tags:: - Show tag refs found in `$GIT_DIR/refs/tags`. +--glob=pattern:: + Show all refs matching the shell glob pattern `pattern`. If + the pattern does not start with `refs/`, this is automatically + prepended. If the pattern does not contain a globbing + character (`?`, `\*`, or `[`), it is turned into a prefix + match by appending `/\*`. ---remotes:: - Show tag refs found in `$GIT_DIR/refs/remotes`. +--show-toplevel:: + Show the absolute path of the top-level directory. --show-prefix:: When the command is invoked from a subdirectory, show the @@ -136,6 +148,12 @@ OPTIONS --is-bare-repository:: When the repository is bare print "true", otherwise "false". +--local-env-vars:: + List the GIT_* environment variables that are local to the + repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR). + Only the names of the variables are listed, not their value, + even if they are set. + --short:: --short=number:: Instead of outputting the full SHA1 values of object names try to @@ -145,12 +163,12 @@ OPTIONS --since=datestring:: --after=datestring:: Parse the date string, and output the corresponding - --max-age= parameter for 'git-rev-list'. + --max-age= parameter for 'git rev-list'. --until=datestring:: --before=datestring:: Parse the date string, and output the corresponding - --min-age= parameter for 'git-rev-list'. + --min-age= parameter for 'git rev-list'. <args>...:: Flags and parameters to be parsed. @@ -171,12 +189,12 @@ blobs contained in a commit. name the same commit object if there are no other object in your repository whose object name starts with dae86e. -* An output from 'git-describe'; i.e. a closest tag, optionally +* An output from 'git describe'; i.e. a closest tag, optionally followed by a dash and a number of commits, followed by a dash, a `g`, and an abbreviated object name. * A symbolic ref name. E.g. 'master' typically means the commit - object referenced by $GIT_DIR/refs/heads/master. If you + object referenced by refs/heads/master. If you happen to have both heads/master and tags/master, you can explicitly say 'heads/master' to tell git which one you mean. When ambiguous, a `<name>` is disambiguated by taking the @@ -185,25 +203,28 @@ blobs contained in a commit. . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); - . otherwise, `$GIT_DIR/refs/<name>` if exists; + . otherwise, `refs/<name>` if exists; - . otherwise, `$GIT_DIR/refs/tags/<name>` if exists; + . otherwise, `refs/tags/<name>` if exists; - . otherwise, `$GIT_DIR/refs/heads/<name>` if exists; + . otherwise, `refs/heads/<name>` if exists; - . otherwise, `$GIT_DIR/refs/remotes/<name>` if exists; + . otherwise, `refs/remotes/<name>` if exists; - . otherwise, `$GIT_DIR/refs/remotes/<name>/HEAD` if exists. + . otherwise, `refs/remotes/<name>/HEAD` if exists. + HEAD names the commit your changes in the working tree is based on. FETCH_HEAD records the branch you fetched from a remote repository -with your last 'git-fetch' invocation. +with your last 'git fetch' invocation. ORIG_HEAD is created by commands that moves your HEAD in a drastic way, to record the position of the HEAD before their operation, so that you can change the tip of the branch back to the state before you ran them easily. MERGE_HEAD records the commit(s) you are merging into your branch -when you run 'git-merge'. +when you run 'git merge'. ++ +Note that any of the `refs/*` cases above may come either from +the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. * A ref followed by the suffix '@' with a date specification enclosed in a brace @@ -231,6 +252,10 @@ when you run 'git-merge'. * The special construct '@\{-<n>\}' means the <n>th branch checked out before the current one. +* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to + the branch the ref is set to build on top of. Missing ref defaults + to the current branch. + * A suffix '{caret}' to a revision parameter means the first parent of that commit object. '{caret}<n>' means the <n>th parent (i.e. 'rev{caret}' @@ -308,7 +333,7 @@ G H I J SPECIFYING RANGES ----------------- -History traversing commands such as 'git-log' operate on a set +History traversing commands such as 'git log' operate on a set of commits, not just a single commit. To these commands, specifying a single revision with the notation described in the previous section means the set of commits reachable from that @@ -349,7 +374,7 @@ Here are a handful of examples: PARSEOPT -------- -In `--parseopt` mode, 'git-rev-parse' helps massaging options to bring to shell +In `--parseopt` mode, 'git rev-parse' helps massaging options to bring to shell scripts the same facilities C builtins have. It works as an option normalizer (e.g. splits single switches aggregate values), a bit like `getopt(1)` does. @@ -361,7 +386,7 @@ usage on the standard error stream, and exits with code 129. Input Format ~~~~~~~~~~~~ -'git-rev-parse --parseopt' input format is fully text based. It has two parts, +'git rev-parse --parseopt' input format is fully text based. It has two parts, separated by a line that contains only `--`. The lines before the separator (should be more than one) are used for the usage. The lines after the separator describe the options. @@ -420,13 +445,13 @@ eval `echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?` SQ-QUOTE -------- -In `--sq-quote` mode, 'git-rev-parse' echoes on the standard output a +In `--sq-quote` mode, 'git rev-parse' echoes on the standard output a single line suitable for `sh(1)` `eval`. This line is made by normalizing the arguments following `--sq-quote`. Nothing other than quoting the arguments is done. If you want command input to still be interpreted as usual by -'git-rev-parse' before the output is shell quoted, see the `--sq` +'git rev-parse' before the output is shell quoted, see the `--sq` option. Example diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 5e1175800a..c66bf8072e 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -20,8 +20,8 @@ effect of an earlier commit (often a faulty one). If you want to throw away all uncommitted changes in your working directory, you should see linkgit:git-reset[1], particularly the '--hard' option. If you want to extract specific files as they were in another commit, you -should see linkgit:git-checkout[1], specifically the 'git checkout -<commit> -- <filename>' syntax. Take care with these alternatives as +should see linkgit:git-checkout[1], specifically the `git checkout +<commit> -- <filename>` syntax. Take care with these alternatives as both will discard uncommitted changes in your working directory. OPTIONS @@ -33,7 +33,7 @@ OPTIONS -e:: --edit:: - With this option, 'git-revert' will let you edit the commit + With this option, 'git revert' will let you edit the commit message prior to committing the revert. This is the default if you run the command from a terminal. @@ -54,7 +54,7 @@ See the link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for more details. --no-edit:: - With this option, 'git-revert' will not start the commit + With this option, 'git revert' will not start the commit message editor. -n:: diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 8c482f40b9..ced35b2f53 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -84,7 +84,7 @@ See the CONFIGURATION section for 'sendemail.multiedit'. --in-reply-to=<identifier>:: Specify the contents of the first In-Reply-To header. Subsequent emails will refer to the previous email - instead of this if --chain-reply-to is set (the default) + instead of this if --chain-reply-to is set. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. @@ -172,8 +172,8 @@ Automating email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the - entire patch series. Default is the value of the 'sendemail.chainreplyto' - configuration value; if that is unspecified, default to --chain-reply-to. + entire patch series. Disabled by default, but the 'sendemail.chainreplyto' + configuration variable can be used to enable it. --identity=<identity>:: A configuration identity. When given, causes values in the diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 5a04c6eaf7..deaa7d9654 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -Usually you would want to use 'git-push', which is a +Usually you would want to use 'git push', which is a higher-level wrapper of this command, instead. See linkgit:git-push[1]. Invokes 'git-receive-pack' on a possibly remote repository, and @@ -48,8 +48,8 @@ OPTIONS Run verbosely. --thin:: - Spend extra cycles to minimize the number of objects to be sent. - Use it on slower connection. + Send a "thin" pack, which records objects in deltified form based + on objects not included in the pack to reduce network traffic. <host>:: A remote host to house the repository. When this @@ -86,7 +86,7 @@ and the destination side (after the colon). The ref to be pushed is determined by finding a match that matches the source side, and where it is pushed is determined by using the destination side. The rules used to match a ref are the same -rules used by 'git-rev-parse' to resolve a symbolic ref +rules used by 'git rev-parse' to resolve a symbolic ref name. See linkgit:git-rev-parse[1]. - It is an error if <src> does not match exactly one of the diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 18f14b5be8..3da241304b 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -16,7 +16,7 @@ This is not a command the end user would want to run. Ever. This documentation is meant for people who are studying the Porcelain-ish scripts and/or are writing new ones. -The 'git-sh-setup' scriptlet is designed to be sourced (using +The 'git sh-setup' scriptlet is designed to be sourced (using `.`) by other shell scripts to set up some variables pointing at the normal git directories and a few helper shell functions. diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 42463a955d..dfd4d0c223 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -3,17 +3,17 @@ git-shortlog(1) NAME ---- -git-shortlog - Summarize 'git-log' output +git-shortlog - Summarize 'git log' output SYNOPSIS -------- [verse] git log --pretty=short | 'git shortlog' [-h] [-n] [-s] [-e] [-w] -git shortlog [-n|--numbered] [-s|--summary] [-e|--email] [-w[<width>[,<indent1>[,<indent2>]]]] [<committish>...] +'git shortlog' [-n|--numbered] [-s|--summary] [-e|--email] [-w[<width>[,<indent1>[,<indent2>]]]] [<committish>...] DESCRIPTION ----------- -Summarizes 'git-log' output in a format suitable for inclusion +Summarizes 'git log' output in a format suitable for inclusion in release announcements. Each commit will be grouped by author and the first line of the commit message will be shown. diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 734336119c..b9c4154e73 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -20,8 +20,8 @@ DESCRIPTION ----------- Shows the commit ancestry graph starting from the commits named -with <rev>s or <globs>s (or all refs under $GIT_DIR/refs/heads -and/or $GIT_DIR/refs/tags) semi-visually. +with <rev>s or <globs>s (or all refs under refs/heads +and/or refs/tags) semi-visually. It cannot show more than 29 branches and commits at a time. @@ -37,8 +37,8 @@ OPTIONS <glob>:: A glob pattern that matches branch or tag names under - $GIT_DIR/refs. For example, if you have many topic - branches under $GIT_DIR/refs/heads/topic, giving + refs/. For example, if you have many topic + branches under refs/heads/topic, giving `topic/*` would show all of them. -r:: @@ -176,7 +176,7 @@ EXAMPLE ------- If you keep your primary branches immediately under -`$GIT_DIR/refs/heads`, and topic branches in subdirectories of +`refs/heads`, and topic branches in subdirectories of it, having the following in the configuration file may help: ------------ diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt index e3285aacfd..8382fbe0ec 100644 --- a/Documentation/git-show-index.txt +++ b/Documentation/git-show-index.txt @@ -14,10 +14,10 @@ SYNOPSIS DESCRIPTION ----------- Reads given idx file for packed git archive created with -'git-pack-objects' command, and dumps its contents. +'git pack-objects' command, and dumps its contents. The information it outputs is subset of what you can get from -'git-verify-pack -v'; this command only shows the packfile +'git verify-pack -v'; this command only shows the packfile offset and SHA1 of each object. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 70f400b266..3f9d9c6db3 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -10,7 +10,7 @@ SYNOPSIS [verse] 'git show-ref' [-q|--quiet] [--verify] [--head] [-d|--dereference] [-s|--hash[=<n>]] [--abbrev[=<n>]] [--tags] - [--heads] [--] <pattern>... + [--heads] [--] [<pattern>...] 'git show-ref' --exclude-existing[=<pattern>] < ref-list DESCRIPTION @@ -72,7 +72,7 @@ OPTIONS --exclude-existing[=<pattern>]:: - Make 'git-show-ref' act as a filter that reads refs from stdin of the + Make 'git show-ref' act as a filter that reads refs from stdin of the form "^(?:<anything>\s)?<refname>(?:\^\{\})?$" and performs the following actions on each: (1) strip "^{}" at the end of line if any; @@ -135,7 +135,7 @@ When using the '--verify' flag, the command requires an exact path: will only match the exact branch called "master". -If nothing matches, 'git-show-ref' will return an error code of 1, +If nothing matches, 'git show-ref' will return an error code of 1, and in the case of verification, it will show an error message. For scripting, you can ask it to be quiet with the "--quiet" flag, which diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 48b612e2ae..55e687a7c7 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -16,16 +16,16 @@ Shows one or more objects (blobs, trees, tags and commits). For commits it shows the log message and textual diff. It also presents the merge commit in a special format as produced by -'git-diff-tree --cc'. +'git diff-tree --cc'. For tags, it shows the tag message and the referenced objects. -For trees, it shows the names (equivalent to 'git-ls-tree' +For trees, it shows the names (equivalent to 'git ls-tree' with \--name-only). For plain blobs, it shows the plain contents. -The command takes options applicable to the 'git-diff-tree' command to +The command takes options applicable to the 'git diff-tree' command to control how the changes the commit introduces are shown. This manual page describes only the most frequently used options. diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 3f14b727b8..473889a660 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -20,7 +20,7 @@ SYNOPSIS DESCRIPTION ----------- -Use 'git stash' when you want to record the current state of the +Use `git stash` when you want to record the current state of the working directory and the index, but want to go back to a clean working directory. The command saves your local modifications away and reverts the working directory to match the `HEAD` commit. @@ -33,7 +33,7 @@ A stash is by default listed as "WIP on 'branchname' ...", but you can give a more descriptive message on the command line when you create one. -The latest stash you created is stored in `$GIT_DIR/refs/stash`; older +The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using the usual reflog syntax (e.g. `stash@\{0}` is the most recently created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` @@ -77,7 +77,7 @@ stash@{0}: WIP on submit: 6ebd0e2... Update git-stash documentation stash@{1}: On master: 9cc0589... Add git-stash ---------------------------------------------------------------- + -The command takes options applicable to the 'git-log' +The command takes options applicable to the 'git log' command to control what is shown and how. See linkgit:git-log[1]. show [<stash>]:: @@ -85,7 +85,7 @@ show [<stash>]:: Show the changes recorded in the stash as a diff between the stashed state and its original parent. When no `<stash>` is given, shows the latest one. By default, the command shows the diffstat, but - it will accept any format known to 'git-diff' (e.g., `git stash show + it will accept any format known to 'git diff' (e.g., `git stash show -p stash@\{1}` to view the second most recent stash in patch form). pop [--index] [-q|--quiet] [<stash>]:: @@ -201,7 +201,7 @@ $ git reset --soft HEAD^ # ... continue hacking ... ---------------------------------------------------------------- + -You can use 'git-stash' to simplify the above, like this: +You can use 'git stash' to simplify the above, like this: + ---------------------------------------------------------------- # ... hack hack hack ... diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 84f60f3407..2d4bbfcaf4 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -8,7 +8,7 @@ git-status - Show the working tree status SYNOPSIS -------- -'git status' <options>... +'git status' [<options>...] [--] [<pathspec>...] DESCRIPTION ----------- @@ -17,28 +17,118 @@ current HEAD commit, paths that have differences between the working tree and the index file, and paths in the working tree that are not tracked by git (and are not ignored by linkgit:gitignore[5]). The first are what you _would_ commit by running `git commit`; the second and -third are what you _could_ commit by running 'git-add' before running +third are what you _could_ commit by running 'git add' before running `git commit`. -The command takes the same set of options as 'git-commit'; it -shows what would be committed if the same options are given to -'git-commit'. - -If there is no path that is different between the index file and -the current HEAD commit (i.e., there is nothing to commit by running -`git commit`), the command exits with non-zero status. +OPTIONS +------- + +-s:: +--short:: + Give the output in the short-format. + +--porcelain:: + Give the output in a stable, easy-to-parse format for scripts. + Currently this is identical to --short output, but is guaranteed + not to change in the future, making it safe for scripts. + +-u[<mode>]:: +--untracked-files[=<mode>]:: + Show untracked files (Default: 'all'). ++ +The mode parameter is optional, and is used to specify +the handling of untracked files. The possible options are: ++ +-- + - 'no' - Show no untracked files + - 'normal' - Shows untracked files and directories + - 'all' - Also shows individual files in untracked directories. +-- ++ +See linkgit:git-config[1] for configuration variable +used to change the default for when the option is not +specified. + +-z:: + Terminate entries with NUL, instead of LF. This implies + the `--porcelain` output format if no other format is given. OUTPUT ------ The output from this command is designed to be used as a commit template comment, and all the output lines are prefixed with '#'. +The default, long format, is designed to be human readable, +verbose and descriptive. They are subject to change in any time. The paths mentioned in the output, unlike many other git commands, are made relative to the current directory if you are working in a subdirectory (this is on purpose, to help cutting and pasting). See the status.relativePaths config option below. +In short-format, the status of each path is shown as + + XY PATH1 -> PATH2 + +where `PATH1` is the path in the `HEAD`, and ` -> PATH2` part is +shown only when `PATH1` corresponds to a different path in the +index/worktree (i.e. the file is renamed). The 'XY' is a two-letter +status code. + +The fields (including the `->`) are separated from each other by a +single space. If a filename contains whitespace or other nonprintable +characters, that field will be quoted in the manner of a C string +literal: surrounded by ASCII double quote (34) characters, and with +interior special characters backslash-escaped. + +For paths with merge conflicts, `X` and 'Y' show the modification +states of each side of the merge. For paths that do not have merge +conflicts, `X` shows the status of the index, and `Y` shows the status +of the work tree. For untracked paths, `XY` are `??`. Other status +codes can be interpreted as follows: + +* ' ' = unmodified +* 'M' = modified +* 'A' = added +* 'D' = deleted +* 'R' = renamed +* 'C' = copied +* 'U' = updated but unmerged + +Ignored files are not listed. + + X Y Meaning + ------------------------------------------------- + [MD] not updated + M [ MD] updated in index + A [ MD] added to index + D [ M] deleted from index + R [ MD] renamed in index + C [ MD] copied in index + [MARC] index and work tree matches + [ MARC] M work tree changed since index + [ MARC] D deleted in work tree + ------------------------------------------------- + D D unmerged, both deleted + A U unmerged, added by us + U D unmerged, deleted by them + U A unmerged, added by them + D U unmerged, deleted by us + A A unmerged, both added + U U unmerged, both modified + ------------------------------------------------- + ? ? untracked + ------------------------------------------------- + +There is an alternate -z format recommended for machine parsing. In +that format, the status field is the same, but some other things +change. First, the '->' is omitted from rename entries and the field +order is reversed (e.g 'from -> to' becomes 'to from'). Second, a NUL +(ASCII 0) follows each filename, replacing space as a field separator +and the terminating newline (but a space still separates the status +field from the first filename). Third, filenames containing special +characters are not specially formatted; no quoting or +backslash-escaping is performed. CONFIGURATION ------------- @@ -53,9 +143,9 @@ paths shown are relative to the repository root, not to the current directory. If `status.submodulesummary` is set to a non zero number or true (identical -to -1 or an unlimited number), the submodule summary will be enabled and a -summary of commits for modified submodules will be shown (see --summary-limit -option of linkgit:git-submodule[1]). +to -1 or an unlimited number), the submodule summary will be enabled for +the long format and a summary of commits for modified submodules will be +shown (see --summary-limit option of linkgit:git-submodule[1]). SEE ALSO -------- @@ -63,8 +153,7 @@ linkgit:gitignore[5] Author ------ -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com>. +Written by Junio C Hamano <gitster@pobox.com>. Documentation -------------- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 4ef70c42eb..2502531a3d 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -99,11 +99,11 @@ locate the submodule using the relative URL in .gitmodules. status:: Show the status of the submodules. This will print the SHA-1 of the currently checked out commit for each submodule, along with the - submodule path and the output of 'git-describe' for the + submodule path and the output of 'git describe' for the SHA-1. Each SHA-1 will be prefixed with `-` if the submodule is not initialized and `+` if the currently checked out submodule commit does not match the SHA-1 found in the index of the containing - repository. This command is the default command for 'git-submodule'. + repository. This command is the default command for 'git submodule'. + If '--recursive' is specified, this command will recurse into nested submodules, and show their status as well. @@ -114,8 +114,8 @@ init:: The key used in .git/config is `submodule.$name.url`. This command does not alter existing information in .git/config. You can then customize the submodule clone URLs in .git/config - for your local setup and proceed to 'git submodule update'; - you can also just use 'git submodule update --init' without + for your local setup and proceed to `git submodule update`; + you can also just use `git submodule update --init` without the explicit 'init' step if you do not intend to customize any submodule locations. @@ -218,7 +218,7 @@ OPTIONS This option is only valid for the update command. Rebase the current branch onto the commit recorded in the superproject. If this option is given, the submodule's HEAD will not - be detached. If a a merge failure prevents this process, you will have + be detached. If a merge failure prevents this process, you will have to resolve these failures with linkgit:git-rebase[1]. If the key `submodule.$name.update` is set to `rebase`, this option is implicit. diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 4cdca0d874..99f3c1ea6c 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -62,6 +62,8 @@ COMMANDS Set the 'useSvnsyncProps' option in the [svn-remote] config. --rewrite-root=<URL>;; Set the 'rewriteRoot' option in the [svn-remote] config. +--rewrite-uuid=<UUID>;; + Set the 'rewriteUUID' option in the [svn-remote] config. --username=<USER>;; For transports that SVN handles authentication for (http, https, and plain svn), specify the username. For other @@ -239,6 +241,19 @@ discouraged. where <name> is the name of the SVN repository as specified by the -R option to 'init' (or "svn" by default). +--username;; + Specify the SVN username to perform the commit as. This option overrides + configuration property 'username'. + +--commit-url;; + Use the specified URL to connect to the destination Subversion + repository. This is useful in cases where the source SVN + repository is read-only. This option overrides configuration + property 'commiturl'. ++ + git config --get-all svn-remote.<name>.commiturl ++ + 'tag':: Create a tag in the SVN repository. This is a shorthand for 'branch -t'. @@ -616,6 +631,12 @@ svn-remote.<name>.rewriteRoot:: the repository with a public http:// or svn:// URL in the metadata so users of it will see the public URL. +svn-remote.<name>.rewriteUUID:: + Similar to the useSvmProps option; this is for users who need + to remap the UUID manually. This may be useful in situations + where the original UUID is not available via either useSvmProps + or useSvnsyncProps. + svn.brokenSymlinkWorkaround:: This disables potentially expensive checks to workaround broken symlinks checked into SVN by broken clients. Set this @@ -625,13 +646,14 @@ svn.brokenSymlinkWorkaround:: revision fetched. If unset, 'git svn' assumes this option to be "true". -Since the noMetadata, rewriteRoot, useSvnsyncProps and useSvmProps +Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps options all affect the metadata generated and used by 'git svn'; they *must* be set in the configuration file before any history is imported and these settings should never be changed once they are set. -Additionally, only one of these four options can be used per-svn-remote -section because they affect the 'git-svn-id:' metadata line. +Additionally, only one of these options can be used per svn-remote +section because they affect the 'git-svn-id:' metadata line, except +for rewriteRoot and rewriteUUID which can be used together. BASIC EXAMPLES @@ -816,6 +838,22 @@ independent path component (surrounded by '/' or EOL). This type of configuration is not automatically created by 'init' and should be manually entered with a text-editor or using 'git config'. +It is also possible to fetch a subset of branches or tags by using a +comma-separated list of names within braces. For example: + +------------------------------------------------------------------------ +[svn-remote "huge-project"] + url = http://server.org/svn + fetch = trunk/src:refs/remotes/trunk + branches = branches/{red,green}/src:refs/remotes/branches/* + tags = tags/{1.0,2.0}/src:refs/remotes/tags/* +------------------------------------------------------------------------ + +Note that git-svn keeps track of the highest revision in which a branch +or tag has appeared. If the subset of branches or tags is changed after +fetching, then .git/svn/.metadata must be manually edited to remove (or +reset) branches-maxRev and/or tags-maxRev as appropriate. + SEE ALSO -------- linkgit:git-rebase[1] diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt index 6392538807..33a1536294 100644 --- a/Documentation/git-symbolic-ref.txt +++ b/Documentation/git-symbolic-ref.txt @@ -49,7 +49,7 @@ cumbersome. On some platforms, `ln -sf` does not even work as advertised (horrors). Therefore symbolic links are now deprecated and symbolic refs are used by default. -'git-symbolic-ref' will exit with status 0 if the contents of the +'git symbolic-ref' will exit with status 0 if the contents of the symbolic ref were printed correctly, with status 1 if the requested name is not a symbolic ref, or 128 if another error occurs. diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 299b04f726..31c78a81e0 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -95,7 +95,7 @@ OPTIONS CONFIGURATION ------------- -By default, 'git-tag' in sign-with-default mode (-s) will use your +By default, 'git tag' in sign-with-default mode (-s) will use your committer identity (of the form "Your Name <your@email.address>") to find a key. If you want to use a different default key, you can specify it in the repository configuration as follows: @@ -131,12 +131,12 @@ and be done with it. . The insane thing. You really want to call the new version "X" too, 'even though' -others have already seen the old one. So just use 'git-tag -f' +others have already seen the old one. So just use 'git tag -f' again, as if you hadn't already published the old one. However, Git does *not* (and it should not) change tags behind users back. So if somebody already got the old tag, doing a -'git-pull' on your tree shouldn't just make them overwrite the old +'git pull' on your tree shouldn't just make them overwrite the old one. If somebody got a release tag from you, you cannot just change @@ -190,7 +190,7 @@ private anchor point tags from the other person. You would notice "please pull" messages on the mailing list says repo URL and branch name alone. This is designed to be easily -cut&pasted to a 'git-fetch' command line: +cut&pasted to a 'git fetch' command line: ------------ Linus, please pull from diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt index a5d9558dd1..3c786bd283 100644 --- a/Documentation/git-tar-tree.txt +++ b/Documentation/git-tar-tree.txt @@ -12,19 +12,19 @@ SYNOPSIS DESCRIPTION ----------- -THIS COMMAND IS DEPRECATED. Use 'git-archive' with `--format=tar` +THIS COMMAND IS DEPRECATED. Use 'git archive' with `--format=tar` option instead (and move the <base> argument to `--prefix=base/`). Creates a tar archive containing the tree structure for the named tree. When <base> is specified it is added as a leading path to the files in the generated tar archive. -'git-tar-tree' behaves differently when given a tree ID versus when given +'git tar-tree' behaves differently when given a tree ID versus when given a commit ID or tag ID. In the first case the current time is used as modification time of each file in the archive. In the latter case the commit time as recorded in the referenced commit object is used instead. Additionally the commit ID is stored in a global extended pax header. -It can be extracted using 'git-get-tar-commit-id'. +It can be extracted using 'git get-tar-commit-id'. OPTIONS ------- diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 6052484ab9..68dc1879fe 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -15,6 +15,7 @@ SYNOPSIS [--cacheinfo <mode> <object> <file>]\* [--chmod=(+|-)x] [--assume-unchanged | --no-assume-unchanged] + [--skip-worktree | --no-skip-worktree] [--ignore-submodules] [--really-refresh] [--unresolve] [--again | -g] [--info-only] [--index-info] @@ -31,7 +32,7 @@ cleared. See also linkgit:git-add[1] for a more user-friendly way to do some of the most common operations on the index. -The way 'git-update-index' handles files it is told about can be modified +The way 'git update-index' handles files it is told about can be modified using the various options: OPTIONS @@ -53,7 +54,7 @@ OPTIONS -q:: Quiet. If --refresh finds that the index needs an update, the default behavior is to error out. This option makes - 'git-update-index' continue anyway. + 'git update-index' continue anyway. --ignore-submodules:: Do not try to update submodules. This option is only respected @@ -61,7 +62,7 @@ OPTIONS --unmerged:: If --refresh finds unmerged changes in the index, the default - behavior is to error out. This option makes 'git-update-index' + behavior is to error out. This option makes 'git update-index' continue anyway. --ignore-missing:: @@ -103,9 +104,16 @@ you will need to handle the situation manually. Like '--refresh', but checks stat information unconditionally, without regard to the "assume unchanged" setting. +--skip-worktree:: +--no-skip-worktree:: + When one of these flags is specified, the object name recorded + for the paths are not updated. Instead, these options + set and unset the "skip-worktree" bit for the paths. See + section "Skip-worktree bit" below for more information. + -g:: --again:: - Runs 'git-update-index' itself on the paths whose index + Runs 'git update-index' itself on the paths whose index entries are different from those from the `HEAD` commit. --unresolve:: @@ -123,7 +131,7 @@ you will need to handle the situation manually. --replace:: By default, when a file `path` exists in the index, - 'git-update-index' refuses an attempt to add `path/file`. + 'git update-index' refuses an attempt to add `path/file`. Similarly if a file `path/file` exists, a file `path` cannot be added. With --replace flag, existing entries that conflict with the entry being added are @@ -159,7 +167,7 @@ up-to-date for mode/content changes. But what it *does* do is to can refresh the index for a file that hasn't been changed but where the stat entry is out of date. -For example, you'd want to do this after doing a 'git-read-tree', to link +For example, you'd want to do this after doing a 'git read-tree', to link up the stat index details with the proper files. Using --cacheinfo or --info-only @@ -200,13 +208,13 @@ back on 3-way merge. . mode SP type SP sha1 TAB path + -The second format is to stuff 'git-ls-tree' output +The second format is to stuff 'git ls-tree' output into the index file. . mode SP sha1 SP stage TAB path + This format is to put higher order stages into the -index file and matches 'git-ls-files --stage' output. +index file and matches 'git ls-files --stage' output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and @@ -263,8 +271,8 @@ option. To unset, use `--no-assume-unchanged`. The command looks at `core.ignorestat` configuration variable. When this is true, paths updated with `git update-index paths...` and paths updated with other git commands that update both index and -working tree (e.g. 'git-apply --index', 'git-checkout-index -u', -and 'git-read-tree -u') are automatically marked as "assume +working tree (e.g. 'git apply --index', 'git checkout-index -u', +and 'git read-tree -u') are automatically marked as "assume unchanged". Note that "assume unchanged" bit is *not* set if `git update-index --refresh` finds the working tree file matches the index (use `git update-index --really-refresh` if you want @@ -308,6 +316,27 @@ M foo.c <9> now it checks with lstat(2) and finds it has been changed. +Skip-worktree bit +----------------- + +Skip-worktree bit can be defined in one (long) sentence: When reading +an entry, if it is marked as skip-worktree, then Git pretends its +working directory version is up to date and read the index version +instead. + +To elaborate, "reading" means checking for file existence, reading +file attributes or file content. The working directory version may be +present or absent. If present, its content may match against the index +version or not. Writing is not affected by this bit, content safety +is still first priority. Note that Git _can_ update working directory +file, that is marked skip-worktree, if it is safe to do so (i.e. +working directory version matches index version) + +Although this bit looks similar to assume-unchanged bit, its goal is +different from assume-unchanged bit's. Skip-worktree also takes +precedence over assume-unchanged bit when both are set. + + Configuration ------------- @@ -317,7 +346,7 @@ unreliable, this should be set to 'false' (see linkgit:git-config[1]). This causes the command to ignore differences in file modes recorded in the index and the file mode on the filesystem if they differ only on executable bit. On such an unfortunate filesystem, you may -need to use 'git-update-index --chmod='. +need to use 'git update-index --chmod='. Quite similarly, if `core.symlinks` configuration variable is set to 'false' (see linkgit:git-config[1]), symbolic links are checked out diff --git a/Documentation/git-upload-archive.txt b/Documentation/git-upload-archive.txt index bbd7617587..f5f2b3908b 100644 --- a/Documentation/git-upload-archive.txt +++ b/Documentation/git-upload-archive.txt @@ -12,11 +12,11 @@ SYNOPSIS DESCRIPTION ----------- -Invoked by 'git-archive --remote' and sends a generated archive to the +Invoked by 'git archive --remote' and sends a generated archive to the other end over the git protocol. This command is usually not invoked directly by the end user. The UI -for the protocol is on the 'git-archive' side, and the program pair +for the protocol is on the 'git archive' side, and the program pair is meant to be used to get an archive from a remote repository. OPTIONS diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt index b8e49dce4a..71ca4ef442 100644 --- a/Documentation/git-upload-pack.txt +++ b/Documentation/git-upload-pack.txt @@ -8,17 +8,17 @@ git-upload-pack - Send objects packed back to git-fetch-pack SYNOPSIS -------- -'git upload-pack' [--strict] [--timeout=<n>] <directory> +'git-upload-pack' [--strict] [--timeout=<n>] <directory> DESCRIPTION ----------- -Invoked by 'git-fetch-pack', learns what +Invoked by 'git fetch-pack', learns what objects the other side is missing, and sends them after packing. This command is usually not invoked directly by the end user. -The UI for the protocol is on the 'git-fetch-pack' side, and the +The UI for the protocol is on the 'git fetch-pack' side, and the program pair is meant to be used to pull updates from a remote -repository. For push operations, see 'git-send-pack'. +repository. For push operations, see 'git send-pack'. OPTIONS diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt index ef6aa81872..458f3e2755 100644 --- a/Documentation/git-var.txt +++ b/Documentation/git-var.txt @@ -8,7 +8,7 @@ git-var - Show a git logical variable SYNOPSIS -------- -'git var' [ -l | <variable> ] +'git var' ( -l | <variable> ) DESCRIPTION ----------- @@ -20,7 +20,7 @@ OPTIONS Cause the logical variables to be listed. In addition, all the variables of the git configuration file .git/config are listed as well. (However, the configuration variables listing functionality - is deprecated in favor of 'git config -l'.) + is deprecated in favor of `git config -l`.) EXAMPLE -------- diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt index 97f7f9165e..916a38aa99 100644 --- a/Documentation/git-verify-pack.txt +++ b/Documentation/git-verify-pack.txt @@ -14,7 +14,7 @@ SYNOPSIS DESCRIPTION ----------- Reads given idx file for packed git archive created with the -'git-pack-objects' command and verifies idx file and the +'git pack-objects' command and verifies idx file and the corresponding pack file. OPTIONS diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index 84e70a0234..dada21242c 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -11,7 +11,7 @@ SYNOPSIS DESCRIPTION ----------- -Validates the gpg signature created by 'git-tag'. +Validates the gpg signature created by 'git tag'. OPTIONS ------- diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index 278cf73527..75720491b2 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -62,7 +62,7 @@ browser.<tool>.path You can explicitly provide a full path to your preferred browser by setting the configuration variable 'browser.<tool>.path'. For example, you can configure the absolute path to firefox by setting -'browser.firefox.path'. Otherwise, 'git-web--browse' assumes the tool +'browser.firefox.path'. Otherwise, 'git web--browse' assumes the tool is available in PATH. browser.<tool>.cmd @@ -71,7 +71,7 @@ browser.<tool>.cmd When the browser, specified by options or configuration variables, is not among the supported ones, then the corresponding 'browser.<tool>.cmd' configuration variable will be looked up. If this -variable exists then 'git-web--browse' will treat the specified tool +variable exists then 'git web--browse' will treat the specified tool as a custom command and will use a shell eval to run the command with the URLs passed as arguments. @@ -113,7 +113,7 @@ See linkgit:git-config[1] for more information about this. Author ------ Written by Christian Couder <chriscool@tuxfamily.org> and the git-list -<git@vger.kernel.org>, based on 'git-mergetool' by Theodore Y. Ts'o. +<git@vger.kernel.org>, based on 'git mergetool' by Theodore Y. Ts'o. Documentation ------------- diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index cadfbd9040..ea753cdafc 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -13,8 +13,8 @@ SYNOPSIS DESCRIPTION ----------- Shows commit logs and diff output each commit introduces. The -command internally invokes 'git-rev-list' piped to -'git-diff-tree', and takes command line options for both of +command internally invokes 'git rev-list' piped to +'git diff-tree', and takes command line options for both of these commands. This manual page describes only the most frequently used options. diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt index c8899d528a..bfceacacb3 100644 --- a/Documentation/git-write-tree.txt +++ b/Documentation/git-write-tree.txt @@ -17,17 +17,17 @@ tree object is printed to standard output. The index must be in a fully merged state. -Conceptually, 'git-write-tree' sync()s the current index contents +Conceptually, 'git write-tree' sync()s the current index contents into a set of tree files. In order to have that match what is actually in your directory right -now, you need to have done a 'git-update-index' phase before you did the -'git-write-tree'. +now, you need to have done a 'git update-index' phase before you did the +'git write-tree'. OPTIONS ------- --missing-ok:: - Normally 'git-write-tree' ensures that the objects referenced by the + Normally 'git write-tree' ensures that the objects referenced by the directory exist in the object database. This option disables this check. diff --git a/Documentation/git.txt b/Documentation/git.txt index b4c2bcc45b..46a215824e 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,6 +43,18 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: +* link:v1.7.0.7/git.html[documentation for release 1.7.0.7] + +* release notes for + link:RelNotes-1.7.0.7.txt[1.7.0.7], + link:RelNotes-1.7.0.6.txt[1.7.0.6], + link:RelNotes-1.7.0.5.txt[1.7.0.5], + link:RelNotes-1.7.0.4.txt[1.7.0.4], + link:RelNotes-1.7.0.3.txt[1.7.0.3], + link:RelNotes-1.7.0.2.txt[1.7.0.2], + link:RelNotes-1.7.0.1.txt[1.7.0.1], + link:RelNotes-1.7.0.txt[1.7.0]. + * link:v1.6.6.2/git.html[documentation for release 1.6.6.2] * release notes for @@ -224,7 +236,10 @@ help ...`. -p:: --paginate:: - Pipe all output into 'less' (or if set, $PAGER). + Pipe all output into 'less' (or if set, $PAGER) if standard + output is a terminal. This overrides the `pager.<cmd>` + configuration options (see the "Configuration Mechanism" section + below). --no-pager:: Do not pipe git output into a pager. @@ -396,7 +411,8 @@ people. Here is an example: ------------ Various commands read from the configuration file and adjust -their operation accordingly. +their operation accordingly. See linkgit:git-config[1] for a +list. Identifier Terminology @@ -576,8 +592,8 @@ other linkgit:git-config[1]. 'GIT_SSH':: - If this environment variable is set then 'git-fetch' - and 'git-push' will use this command instead + If this environment variable is set then 'git fetch' + and 'git push' will use this command instead of 'ssh' when they need to connect to a remote system. The '$GIT_SSH' command will be given exactly two arguments: the 'username@host' (or just 'host') from the URL and the @@ -593,8 +609,8 @@ for further details. 'GIT_FLUSH':: If this environment variable is set to "1", then commands such - as 'git-blame' (in incremental mode), 'git-rev-list', 'git-log', - and 'git-whatchanged' will force a flush of the output stream + as 'git blame' (in incremental mode), 'git rev-list', 'git log', + and 'git whatchanged' will force a flush of the output stream after each commit-oriented record have been flushed. If this variable is set to "0", the output of these commands will be done using completely buffered I/O. If this environment variable is diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 5a45e51890..d892e642ed 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -88,9 +88,9 @@ Checking-out and checking-in These attributes affect how the contents stored in the repository are copied to the working tree files when commands -such as 'git-checkout' and 'git-merge' run. They also affect how +such as 'git checkout' and 'git merge' run. They also affect how git stores the contents you prepare in the working tree in the -repository upon 'git-add' and 'git-commit'. +repository upon 'git add' and 'git commit'. `crlf` ^^^^^^ @@ -148,16 +148,16 @@ an irreversible conversion. The safety triggers to prevent such a conversion done to the files in the work tree, but there are a few exceptions. Even though... -- 'git-add' itself does not touch the files in the work tree, the +- 'git add' itself does not touch the files in the work tree, the next checkout would, so the safety triggers; -- 'git-apply' to update a text file with a patch does touch the files +- 'git apply' to update a text file with a patch does touch the files in the work tree, but the operation is about text files and CRLF conversion is about fixing the line ending inconsistencies, so the safety does not trigger; -- 'git-diff' itself does not touch the files in the work tree, it is - often run to inspect the changes you intend to next 'git-add'. To +- 'git diff' itself does not touch the files in the work tree, it is + often run to inspect the changes you intend to next 'git add'. To catch potential problems early, safety triggers. @@ -511,7 +511,8 @@ command to run to merge ancestor's version (`%O`), current version (`%A`) and the other branches' version (`%B`). These three tokens are replaced with the names of temporary files that hold the contents of these versions when the command line is -built. +built. Additionally, %L will be replaced with the conflict marker +size (see below). The merge driver is expected to leave the result of the merge in the file named with `%A` by overwriting it, and exit with zero @@ -525,6 +526,23 @@ When left unspecified, the driver itself is used for both internal merge and the final merge. +`conflict-marker-size` +^^^^^^^^^^^^^^^^^^^^^^ + +This attribute controls the length of conflict markers left in +the work tree file during a conflicted merge. Only setting to +the value to a positive integer has any meaningful effect. + +For example, this line in `.gitattributes` can be used to tell the merge +machinery to leave much longer (instead of the usual 7-character-long) +conflict markers when merging the file `Documentation/git-merge.txt` +results in a conflict. + +------------------------ +Documentation/git-merge.txt conflict-marker-size=32 +------------------------ + + Checking whitespace errors ~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index f762dca440..f7815e96a2 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -27,6 +27,14 @@ interfaces on top of it called "porcelain". You may not want to use the plumbing directly very often, but it can be good to know what the plumbing does for when the porcelain isn't flushing. +Back when this document was originally written, many porcelain +commands were shell scripts. For simplicity, it still uses them as +examples to illustrate how plumbing is fit together to form the +porcelain commands. The source tree includes some of these scripts in +contrib/examples/ for reference. Although these are not implemented as +shell scripts anymore, the description of what the plumbing layer +commands do is still valid. + [NOTE] Deeper technical details are often marked as Notes, which you can skip on your first reading. @@ -44,7 +52,7 @@ to import into git. For our first example, we're going to start a totally new repository from scratch, with no pre-existing files, and we'll call it 'git-tutorial'. To start up, create a subdirectory for it, change into that -subdirectory, and initialize the git infrastructure with 'git-init': +subdirectory, and initialize the git infrastructure with 'git init': ------------------------------------------------ $ mkdir git-tutorial @@ -139,7 +147,7 @@ but to actually check in your hard work, you will have to go through two steps: - commit that index file as an object. The first step is trivial: when you want to tell git about any changes -to your working tree, you use the 'git-update-index' program. That +to your working tree, you use the 'git update-index' program. That program normally just takes a list of filenames you want to update, but to avoid trivial mistakes, it refuses to add new entries to the index (or remove existing ones) unless you explicitly tell it that you're @@ -173,14 +181,14 @@ and see two files: which correspond with the objects with names of `557db...` and `f24c7...` respectively. -If you want to, you can use 'git-cat-file' to look at those objects, but +If you want to, you can use 'git cat-file' to look at those objects, but you'll have to use the object name, not the filename of the object: ---------------- $ git cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238 ---------------- -where the `-t` tells 'git-cat-file' to tell you what the "type" of the +where the `-t` tells 'git cat-file' to tell you what the "type" of the object is. git will tell you that you have a "blob" object (i.e., just a regular file), and you can see the contents with @@ -205,7 +213,7 @@ hexadecimal digits in most places. Anyway, as we mentioned previously, you normally never actually take a look at the objects themselves, and typing long 40-character hex names is not something you'd normally want to do. The above digression -was just to show that 'git-update-index' did something magical, and +was just to show that 'git update-index' did something magical, and actually saved away the contents of your files into the git object database. @@ -228,7 +236,7 @@ $ echo "It's a new day for git" >>hello and you can now, since you told git about the previous state of `hello`, ask git what has changed in the tree compared to your old index, using the -'git-diff-files' command: +'git diff-files' command: ------------ $ git diff-files @@ -239,7 +247,7 @@ version of a 'diff', but that internal version really just tells you that it has noticed that "hello" has been modified, and that the old object contents it had have been replaced with something else. -To make it readable, we can tell 'git-diff-files' to output the +To make it readable, we can tell 'git diff-files' to output the differences as a patch, using the `-p` flag: ------------ @@ -255,7 +263,7 @@ index 557db03..263414f 100644 i.e. the diff of the change we caused by adding another line to `hello`. -In other words, 'git-diff-files' always shows us the difference between +In other words, 'git diff-files' always shows us the difference between what is recorded in the index, and what is currently in the working tree. That's very useful. @@ -283,7 +291,7 @@ that in two phases: creating a 'tree' object, and committing that 'tree' object as a 'commit' object together with an explanation of what the tree was all about, along with information of how we came to that state. -Creating a tree object is trivial, and is done with 'git-write-tree'. +Creating a tree object is trivial, and is done with 'git write-tree'. There are no options or other input: `git write-tree` will take the current index state, and write an object that describes that whole index. In other words, we're now tying together all the different @@ -307,23 +315,23 @@ is not a "blob" object, but a "tree" object (you can also use `git cat-file` to actually output the raw object contents, but you'll see mainly a binary mess, so that's less interesting). -However -- normally you'd never use 'git-write-tree' on its own, because +However -- normally you'd never use 'git write-tree' on its own, because normally you always commit a tree into a commit object using the -'git-commit-tree' command. In fact, it's easier to not actually use -'git-write-tree' on its own at all, but to just pass its result in as an -argument to 'git-commit-tree'. +'git commit-tree' command. In fact, it's easier to not actually use +'git write-tree' on its own at all, but to just pass its result in as an +argument to 'git commit-tree'. -'git-commit-tree' normally takes several arguments -- it wants to know +'git commit-tree' normally takes several arguments -- it wants to know what the 'parent' of a commit was, but since this is the first commit ever in this new repository, and it has no parents, we only need to pass in -the object name of the tree. However, 'git-commit-tree' also wants to get a +the object name of the tree. However, 'git commit-tree' also wants to get a commit message on its standard input, and it will write out the resulting object name for the commit to its standard output. And this is where we create the `.git/refs/heads/master` file which is pointed at by `HEAD`. This file is supposed to contain the reference to the top-of-tree of the master branch, and since -that's exactly what 'git-commit-tree' spits out, we can do this +that's exactly what 'git commit-tree' spits out, we can do this all with a sequence of simple shell commands: ------------------------------------------------ @@ -345,11 +353,11 @@ instead, and it would have done the above magic scripting for you. Making a change --------------- -Remember how we did the 'git-update-index' on file `hello` and then we +Remember how we did the 'git update-index' on file `hello` and then we changed `hello` afterward, and could compare the new state of `hello` with the state we saved in the index file? -Further, remember how I said that 'git-write-tree' writes the contents +Further, remember how I said that 'git write-tree' writes the contents of the *index* file to the tree, and thus what we just committed was in fact the *original* contents of the file `hello`, not the new ones. We did that on purpose, to show the difference between the index state, and the @@ -360,12 +368,12 @@ As before, if we do `git diff-files -p` in our git-tutorial project, we'll still see the same difference we saw last time: the index file hasn't changed by the act of committing anything. However, now that we have committed something, we can also learn to use a new command: -'git-diff-index'. +'git diff-index'. -Unlike 'git-diff-files', which showed the difference between the index -file and the working tree, 'git-diff-index' shows the differences +Unlike 'git diff-files', which showed the difference between the index +file and the working tree, 'git diff-index' shows the differences between a committed *tree* and either the index file or the working -tree. In other words, 'git-diff-index' wants a tree to be diffed +tree. In other words, 'git diff-index' wants a tree to be diffed against, and before we did the commit, we couldn't do that, because we didn't have anything to diff against. @@ -375,7 +383,7 @@ But now we can do $ git diff-index -p HEAD ---------------- -(where `-p` has the same meaning as it did in 'git-diff-files'), and it +(where `-p` has the same meaning as it did in 'git diff-files'), and it will show us the same difference, but for a totally different reason. Now we're comparing the working tree not against the index file, but against the tree we just wrote. It just so happens that those two @@ -390,7 +398,7 @@ $ git diff HEAD which ends up doing the above for you. -In other words, 'git-diff-index' normally compares a tree against the +In other words, 'git diff-index' normally compares a tree against the working tree, but when given the `\--cached` flag, it is told to instead compare against just the index cache contents, and ignore the current working tree state entirely. Since we just wrote the index @@ -399,7 +407,7 @@ an empty set of differences, and that's exactly what it does. [NOTE] ================ -'git-diff-index' really always uses the index for its +'git diff-index' really always uses the index for its comparisons, and saying that it compares a tree against the working tree is thus not strictly accurate. In particular, the list of files to compare (the "meta-data") *always* comes from the index file, @@ -428,11 +436,11 @@ $ git update-index hello (note how we didn't need the `\--add` flag this time, since git knew about the file already). -Note what happens to the different 'git-diff-\*' versions here. After +Note what happens to the different 'git diff-\*' versions here. After we've updated `hello` in the index, `git diff-files -p` now shows no differences, but `git diff-index -p HEAD` still *does* show that the current state is different from the state we committed. In fact, now -'git-diff-index' shows the same difference whether we use the `--cached` +'git diff-index' shows the same difference whether we use the `--cached` flag or not, since now the index is coherent with the working tree. Now, since we've updated `hello` in the index, we can commit the new @@ -460,7 +468,7 @@ You've now made your first real git commit. And if you're interested in looking at what `git commit` really does, feel free to investigate: it's a few very simple shell scripts to generate the helpful (?) commit message headers, and a few one-liners that actually do the -commit itself ('git-commit'). +commit itself ('git commit'). Inspecting Changes @@ -468,9 +476,9 @@ Inspecting Changes While creating changes is useful, it's even more useful if you can tell later what changed. The most useful command for this is another of the -'diff' family, namely 'git-diff-tree'. +'diff' family, namely 'git diff-tree'. -'git-diff-tree' can be given two arbitrary trees, and it will tell you the +'git diff-tree' can be given two arbitrary trees, and it will tell you the differences between them. Perhaps even more commonly, though, you can give it just a single commit object, and it will figure out the parent of that commit itself, and show the difference directly. Thus, to get @@ -518,15 +526,15 @@ various diff-\* commands compare things. +-----------+ ============ -More interestingly, you can also give 'git-diff-tree' the `--pretty` flag, +More interestingly, you can also give 'git diff-tree' the `--pretty` flag, which tells it to also show the commit message and author and date of the commit, and you can tell it to show a whole series of diffs. Alternatively, you can tell it to be "silent", and not show the diffs at all, but just show the actual commit message. -In fact, together with the 'git-rev-list' program (which generates a -list of revisions), 'git-diff-tree' ends up being a veritable fount of -changes. A trivial (but very useful) script called 'git-whatchanged' is +In fact, together with the 'git rev-list' program (which generates a +list of revisions), 'git diff-tree' ends up being a veritable fount of +changes. A trivial (but very useful) script called 'git whatchanged' is included with git which does exactly this, and shows a log of recent activities. @@ -553,14 +561,14 @@ When using the above two commands, the initial commit will be shown. If this is a problem because it is huge, you can hide it by setting the log.showroot configuration variable to false. Having this, you can still show it for each command just adding the `\--root` option, -which is a flag for 'git-diff-tree' accepted by both commands. +which is a flag for 'git diff-tree' accepted by both commands. With that, you should now be having some inkling of what git does, and can explore on your own. [NOTE] Most likely, you are not directly using the core -git Plumbing commands, but using Porcelain such as 'git-add', `git-rm' +git Plumbing commands, but using Porcelain such as 'git add', `git-rm' and `git-commit'. @@ -595,7 +603,7 @@ pointer to the state you want to tag, but also a small tag name and message, along with optionally a PGP signature that says that yes, you really did that tag. You create these annotated tags with either the `-a` or -`-s` flag to 'git-tag': +`-s` flag to 'git tag': ---------------- $ git tag -s <tagname> @@ -642,7 +650,7 @@ and it will be gone. There's no external repository, and there's no history outside the project you created. - if you want to move or duplicate a git repository, you can do so. There - is 'git-clone' command, but if all you want to do is just to + is 'git clone' command, but if all you want to do is just to create a copy of your repository (with all the full history that went along with it), you can do so with a regular `cp -a git-tutorial new-git-tutorial`. @@ -666,7 +674,7 @@ When copying a remote repository, you'll want to at a minimum update the index cache when you do this, and especially with other peoples' repositories you often want to make sure that the index cache is in some known state (you don't know *what* they've done and not yet checked in), -so usually you'll precede the 'git-update-index' with a +so usually you'll precede the 'git update-index' with a ---------------- $ git read-tree --reset HEAD @@ -674,7 +682,7 @@ $ git update-index --refresh ---------------- which will force a total index re-build from the tree pointed to by `HEAD`. -It resets the index contents to `HEAD`, and then the 'git-update-index' +It resets the index contents to `HEAD`, and then the 'git update-index' makes sure to match up all index entries with the checked-out files. If the original repository had uncommitted changes in its working tree, `git update-index --refresh` notices them and @@ -689,8 +697,8 @@ $ git reset and in fact a lot of the common git command combinations can be scripted with the `git xyz` interfaces. You can learn things by just looking at what the various git scripts do. For example, `git reset` used to be -the above two lines implemented in 'git-reset', but some things like -'git-status' and 'git-commit' are slightly more complex scripts around +the above two lines implemented in 'git reset', but some things like +'git status' and 'git commit' are slightly more complex scripts around the basic git commands. Many (most?) public remote repositories will not contain any of @@ -729,7 +737,7 @@ where the `-u` flag means that you want the checkout to keep the index up-to-date (so that you don't have to refresh it afterward), and the `-a` flag means "check out all files" (if you have a stale copy or an older version of a checked out tree you may also need to add the `-f` -flag first, to tell 'git-checkout-index' to *force* overwriting of any old +flag first, to tell 'git checkout-index' to *force* overwriting of any old files). Again, this can all be simplified with @@ -776,7 +784,7 @@ to it. ================================================ If you make the decision to start your new branch at some other point in the history than the current `HEAD`, you can do so by -just telling 'git-checkout' what the base of the checkout would be. +just telling 'git checkout' what the base of the checkout would be. In other words, if you have an earlier tag or branch, you'd just do ------------ @@ -819,7 +827,7 @@ $ git branch <branchname> [startingpoint] which will simply _create_ the branch, but will not do anything further. You can then later -- once you decide that you want to actually develop -on that branch -- switch to that branch with a regular 'git-checkout' +on that branch -- switch to that branch with a regular 'git checkout' with the branchname as the argument. @@ -881,7 +889,7 @@ source. Anyway, let's exit 'gitk' (`^Q` or the File menu), and decide that we want to merge the work we did on the `mybranch` branch into the `master` branch (which is currently our `HEAD` too). To do that, there's a nice -script called 'git-merge', which wants to know which branches you want +script called 'git merge', which wants to know which branches you want to resolve and what the merge is all about: ------------ @@ -925,7 +933,7 @@ $ git commit -i hello which will very loudly warn you that you're now committing a merge (which is correct, so never mind), and you can write a small merge -message about your adventures in 'git-merge'-land. +message about your adventures in 'git merge'-land. After you're done, start up `gitk \--all` to see graphically what the history looks like. Notice that `mybranch` still exists, and you can @@ -967,21 +975,21 @@ branch head. Please see linkgit:git-rev-parse[1] if you want to see more complex cases. [NOTE] -Without the '--more=1' option, 'git-show-branch' would not output the +Without the '--more=1' option, 'git show-branch' would not output the '[master^]' commit, as '[mybranch]' commit is a common ancestor of both 'master' and 'mybranch' tips. Please see linkgit:git-show-branch[1] for details. [NOTE] If there were more commits on the 'master' branch after the merge, the -merge commit itself would not be shown by 'git-show-branch' by +merge commit itself would not be shown by 'git show-branch' by default. You would need to provide '--sparse' option to make the merge commit visible in this case. Now, let's pretend you are the one who did all the work in `mybranch`, and the fruit of your hard work has finally been merged to the `master` branch. Let's go back to `mybranch`, and run -'git-merge' to get the "upstream changes" back to your branch. +'git merge' to get the "upstream changes" back to your branch. ------------ $ git checkout mybranch @@ -1023,12 +1031,12 @@ Merging external work It's usually much more common that you merge with somebody else than merging with your own branches, so it's worth pointing out that git makes that very easy too, and in fact, it's not that different from -doing a 'git-merge'. In fact, a remote merge ends up being nothing +doing a 'git merge'. In fact, a remote merge ends up being nothing more than "fetch the work from a remote repository into a temporary tag" -followed by a 'git-merge'. +followed by a 'git merge'. Fetching from a remote repository is done by, unsurprisingly, -'git-fetch': +'git fetch': ---------------- $ git fetch <remote-repository> @@ -1095,7 +1103,7 @@ The 'commit walkers' are sometimes also called 'dumb transports', because they do not require any git aware smart server like git Native transport does. Any stock HTTP server that does not even support directory index would suffice. But -you must prepare your repository with 'git-update-server-info' +you must prepare your repository with 'git update-server-info' to help dumb transport downloaders. Once you fetch from the remote repository, you `merge` that @@ -1115,7 +1123,7 @@ argument. [NOTE] You could do without using any branches at all, by keeping as many local repositories as you would like to have -branches, and merging between them with 'git-pull', just like +branches, and merging between them with 'git pull', just like you merge between branches. The advantage of this approach is that it lets you keep a set of files for each `branch` checked out and you may find it easier to switch back and forth if you @@ -1132,7 +1140,7 @@ like this: $ git config remote.linus.url http://www.kernel.org/pub/scm/git/git.git/ ------------------------------------------------ -and use the "linus" keyword with 'git-pull' instead of the full URL. +and use the "linus" keyword with 'git pull' instead of the full URL. Examples. @@ -1168,7 +1176,7 @@ $ git show-branch --more=2 master mybranch +* [master^] Some fun. ------------ -Remember, before running 'git-merge', our `master` head was at +Remember, before running 'git merge', our `master` head was at "Some fun." commit, while our `mybranch` head was at "Some work." commit. @@ -1195,7 +1203,7 @@ Now we are ready to experiment with the merge by hand. `git merge` command, when merging two branches, uses 3-way merge algorithm. First, it finds the common ancestor between them. -The command it uses is 'git-merge-base': +The command it uses is 'git merge-base': ------------ $ mb=$(git merge-base HEAD mybranch) @@ -1219,7 +1227,7 @@ this: $ git read-tree -m -u $mb HEAD mybranch ------------ -This is the same 'git-read-tree' command we have already seen, +This is the same 'git read-tree' command we have already seen, but it takes three trees, unlike previous examples. This reads the contents of each tree into different 'stage' in the index file (the first tree goes to stage 1, the second to stage 2, @@ -1260,8 +1268,8 @@ $ git ls-files --unmerged The next step of merging is to merge these three versions of the file, using 3-way merge. This is done by giving -'git-merge-one-file' command as one of the arguments to -'git-merge-index' command: +'git merge-one-file' command as one of the arguments to +'git merge-index' command: ------------ $ git merge-index git-merge-one-file hello @@ -1270,7 +1278,7 @@ ERROR: Merge conflict in hello fatal: merge program failed ------------ -'git-merge-one-file' script is called with parameters to +'git merge-one-file' script is called with parameters to describe those three versions, and is responsible to leave the merge results in the working tree. It is a fairly straightforward shell script, and @@ -1289,9 +1297,9 @@ $ git ls-files --stage ------------ This is the state of the index file and the working file after -'git-merge' returns control back to you, leaving the conflicting +'git merge' returns control back to you, leaving the conflicting merge for you to resolve. Notice that the path `hello` is still -unmerged, and what you see with 'git-diff' at this point is +unmerged, and what you see with 'git diff' at this point is differences since stage 2 (i.e. your version). @@ -1328,8 +1336,8 @@ into it later. Obviously, this repository creation needs to be done only once. [NOTE] -'git-push' uses a pair of commands, -'git-send-pack' on your local machine, and 'git-receive-pack' +'git push' uses a pair of commands, +'git send-pack' on your local machine, and 'git-receive-pack' on the remote machine. The communication between the two over the network internally uses an SSH connection. @@ -1344,7 +1352,7 @@ $ mkdir my-git.git ------------ Then, make that directory into a git repository by running -'git-init', but this time, since its name is not the usual +'git init', but this time, since its name is not the usual `.git`, we do things slightly differently: ------------ @@ -1407,7 +1415,7 @@ $ git repack will do it for you. If you followed the tutorial examples, you would have accumulated about 17 objects in `.git/objects/??/` -directories by now. 'git-repack' tells you how many objects it +directories by now. 'git repack' tells you how many objects it packed, and stores the packed file in `.git/objects/pack` directory. @@ -1420,7 +1428,7 @@ them together. The former holds all the data from the objects in the pack, and the latter holds the index for random access. -If you are paranoid, running 'git-verify-pack' command would +If you are paranoid, running 'git verify-pack' command would detect if you have a corrupt pack, but do not worry too much. Our programs are always perfect ;-). @@ -1487,17 +1495,17 @@ If other people are pulling from your repository over dumb transport protocols (HTTP), you need to keep this repository 'dumb transport friendly'. After `git init`, `$GIT_DIR/hooks/post-update.sample` copied from the standard templates -would contain a call to 'git-update-server-info' +would contain a call to 'git update-server-info' but you need to manually enable the hook with `mv post-update.sample post-update`. This makes sure -'git-update-server-info' keeps the necessary files up-to-date. +'git update-server-info' keeps the necessary files up-to-date. 3. Push into the public repository from your primary repository. -4. 'git-repack' the public repository. This establishes a big +4. 'git repack' the public repository. This establishes a big pack that contains the initial set of objects as the - baseline, and possibly 'git-prune' if the transport + baseline, and possibly 'git prune' if the transport used for pulling from your repository supports packed repositories. @@ -1511,14 +1519,14 @@ You can repack this private repository whenever you feel like. 6. Push your changes to the public repository, and announce it to the public. -7. Every once in a while, 'git-repack' the public repository. +7. Every once in a while, 'git repack' the public repository. Go back to step 5. and continue working. A recommended work cycle for a "subsystem maintainer" who works on that project and has an own "public repository" goes like this: -1. Prepare your work repository, by 'git-clone' the public +1. Prepare your work repository, by 'git clone' the public repository of the "project lead". The URL used for the initial cloning is stored in the remote.origin.url configuration variable. @@ -1533,7 +1541,7 @@ on that project and has an own "public repository" goes like this: point at the repository you are borrowing from. 4. Push into the public repository from your primary - repository. Run 'git-repack', and possibly 'git-prune' if the + repository. Run 'git repack', and possibly 'git prune' if the transport used for pulling from your repository supports packed repositories. @@ -1550,7 +1558,7 @@ like. "project lead" and possibly your "sub-subsystem maintainers" to pull from it. -7. Every once in a while, 'git-repack' the public repository. +7. Every once in a while, 'git repack' the public repository. Go back to step 5. and continue working. @@ -1558,7 +1566,7 @@ A recommended work cycle for an "individual developer" who does not have a "public" repository is somewhat different. It goes like this: -1. Prepare your work repository, by 'git-clone' the public +1. Prepare your work repository, by 'git clone' the public repository of the "project lead" (or a "subsystem maintainer", if you work on a subsystem). The URL used for the initial cloning is stored in the remote.origin.url @@ -1656,8 +1664,8 @@ $ git reset --hard master~2 ------------ You can make sure `git show-branch` matches the state before -those two 'git-merge' you just did. Then, instead of running -two 'git-merge' commands in a row, you would merge these two +those two 'git merge' you just did. Then, instead of running +two 'git merge' commands in a row, you would merge these two branch heads (this is known as 'making an Octopus'): ------------ diff --git a/Documentation/gitcvs-migration.txt b/Documentation/gitcvs-migration.txt index 0e49c1c037..d861ec452f 100644 --- a/Documentation/gitcvs-migration.txt +++ b/Documentation/gitcvs-migration.txt @@ -47,25 +47,25 @@ them first before running git pull. [NOTE] ================================ The 'pull' command knows where to get updates from because of certain -configuration variables that were set by the first 'git-clone' +configuration variables that were set by the first 'git clone' command; see `git config -l` and the linkgit:git-config[1] man page for details. ================================ You can update the shared repository with your changes by first committing -your changes, and then using the 'git-push' command: +your changes, and then using the 'git push' command: ------------------------------------------------ $ git push origin master ------------------------------------------------ to "push" those commits to the shared repository. If someone else has -updated the repository more recently, 'git-push', like 'cvs commit', will +updated the repository more recently, 'git push', like 'cvs commit', will complain, in which case you must pull any changes before attempting the push again. -In the 'git-push' command above we specify the name of the remote branch -to update (`master`). If we leave that out, 'git-push' tries to update +In the 'git push' command above we specify the name of the remote branch +to update (`master`). If we leave that out, 'git push' tries to update any branches in the remote repository that have the same name as a branch in the local repository. So the last 'push' can be done with either of: diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 3cd21b64eb..9de8caf5d1 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -The diff commands 'git-diff-index', 'git-diff-files', and 'git-diff-tree' +The diff commands 'git diff-index', 'git diff-files', and 'git diff-tree' can be told to manipulate differences they find in unconventional ways before showing 'diff' output. The manipulation is collectively called "diffcore transformation". This short note @@ -23,18 +23,18 @@ that is easier to understand than the conventional kind. The chain of operation ---------------------- -The 'git-diff-{asterisk}' family works by first comparing two sets of +The 'git diff-{asterisk}' family works by first comparing two sets of files: - - 'git-diff-index' compares contents of a "tree" object and the + - 'git diff-index' compares contents of a "tree" object and the working directory (when '\--cached' flag is not used) or a "tree" object and the index file (when '\--cached' flag is used); - - 'git-diff-files' compares contents of the index file and the + - 'git diff-files' compares contents of the index file and the working directory; - - 'git-diff-tree' compares contents of two "tree" objects; + - 'git diff-tree' compares contents of two "tree" objects; In all of these cases, the commands themselves first optionally limit the two sets of files by any pathspecs given on their command-lines, @@ -74,12 +74,12 @@ into another list. There are currently 5 such transformations: - diffcore-pickaxe - diffcore-order -These are applied in sequence. The set of filepairs 'git-diff-{asterisk}' +These are applied in sequence. The set of filepairs 'git diff-{asterisk}' commands find are used as the input to diffcore-break, and the output from diffcore-break is used as the input to the next transformation. The final result is then passed to the output routine and generates either diff-raw format (see Output -format sections of the manual for 'git-diff-{asterisk}' commands) or +format sections of the manual for 'git diff-{asterisk}' commands) or diff-patch format. @@ -87,7 +87,7 @@ diffcore-break: For Splitting Up "Complete Rewrites" ---------------------------------------------------- The second transformation in the chain is diffcore-break, and is -controlled by the -B option to the 'git-diff-{asterisk}' commands. This is +controlled by the -B option to the 'git diff-{asterisk}' commands. This is used to detect a filepair that represents "complete rewrite" and break such filepair into two filepairs that represent delete and create. E.g. If the input contained this filepair: @@ -123,7 +123,7 @@ diffcore-rename: For Detection Renames and Copies This transformation is used to detect renames and copies, and is controlled by the -M option (to detect renames) and the -C option -(to detect copies as well) to the 'git-diff-{asterisk}' commands. If the +(to detect copies as well) to the 'git diff-{asterisk}' commands. If the input contained these filepairs: ------------------------------------------------ @@ -168,11 +168,11 @@ number after the "-M" or "-C" option (e.g. "-M8" to tell it to use 8/10 = 80%). Note. When the "-C" option is used with `\--find-copies-harder` -option, 'git-diff-{asterisk}' commands feed unmodified filepairs to +option, 'git diff-{asterisk}' commands feed unmodified filepairs to diffcore mechanism as well as modified ones. This lets the copy detector consider unmodified files as copy source candidates at the expense of making it slower. Without `\--find-copies-harder`, -'git-diff-{asterisk}' commands can detect copies only if the file that was +'git diff-{asterisk}' commands can detect copies only if the file that was copied happened to have been modified in the same changeset. @@ -223,7 +223,7 @@ diffcore-pickaxe: For Detecting Addition/Deletion of Specified String This transformation is used to find filepairs that represent changes that touch a specified string, and is controlled by the --S option and the `\--pickaxe-all` option to the 'git-diff-{asterisk}' +-S option and the `\--pickaxe-all` option to the 'git diff-{asterisk}' commands. When diffcore-pickaxe is in use, it checks if there are @@ -246,7 +246,7 @@ diffcore-order: For Sorting the Output Based on Filenames This is used to reorder the filepairs according to the user's (or project's) taste, and is controlled by the -O option to the -'git-diff-{asterisk}' commands. +'git diff-{asterisk}' commands. This takes a text file each of whose lines is a shell glob pattern. Filepairs that match a glob pattern on an earlier line diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 29eeae77ca..87e2c035a7 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -15,7 +15,7 @@ DESCRIPTION Hooks are little scripts you can place in `$GIT_DIR/hooks` directory to trigger action at certain points. When -'git-init' is run, a handful of example hooks are copied into the +'git init' is run, a handful of example hooks are copied into the `hooks` directory of the new repository, but by default they are all disabled. To enable a hook, rename it by removing its `.sample` suffix. @@ -32,10 +32,10 @@ HOOKS applypatch-msg ~~~~~~~~~~~~~~ -This hook is invoked by 'git-am' script. It takes a single +This hook is invoked by 'git am' script. It takes a single parameter, the name of the file that holds the proposed commit log message. Exiting with non-zero status causes -'git-am' to abort before applying the patch. +'git am' to abort before applying the patch. The hook is allowed to edit the message file in place, and can be used to normalize the message into some project standard @@ -48,7 +48,7 @@ The default 'applypatch-msg' hook, when enabled, runs the pre-applypatch ~~~~~~~~~~~~~~ -This hook is invoked by 'git-am'. It takes no parameter, and is +This hook is invoked by 'git am'. It takes no parameter, and is invoked after the patch is applied, but before a commit is made. If it exits with non-zero status, then the working tree will not be @@ -63,33 +63,33 @@ The default 'pre-applypatch' hook, when enabled, runs the post-applypatch ~~~~~~~~~~~~~~~ -This hook is invoked by 'git-am'. It takes no parameter, +This hook is invoked by 'git am'. It takes no parameter, and is invoked after the patch is applied and a commit is made. This hook is meant primarily for notification, and cannot affect -the outcome of 'git-am'. +the outcome of 'git am'. pre-commit ~~~~~~~~~~ -This hook is invoked by 'git-commit', and can be bypassed +This hook is invoked by 'git commit', and can be bypassed with `\--no-verify` option. It takes no parameter, and is invoked before obtaining the proposed commit log message and making a commit. Exiting with non-zero status from this script -causes the 'git-commit' to abort. +causes the 'git commit' to abort. The default 'pre-commit' hook, when enabled, catches introduction of lines with trailing whitespaces and aborts the commit when such a line is found. -All the 'git-commit' hooks are invoked with the environment +All the 'git commit' hooks are invoked with the environment variable `GIT_EDITOR=:` if the command will not bring up an editor to modify the commit message. prepare-commit-msg ~~~~~~~~~~~~~~~~~~ -This hook is invoked by 'git-commit' right after preparing the +This hook is invoked by 'git commit' right after preparing the default log message, and before the editor is started. It takes one to three parameters. The first is the name of the file @@ -101,7 +101,7 @@ commit is a merge or a `.git/MERGE_MSG` file exists); `squash` (if a `.git/SQUASH_MSG` file exists); or `commit`, followed by a commit SHA1 (if a `-c`, `-C` or `\--amend` option was given). -If the exit status is non-zero, 'git-commit' will abort. +If the exit status is non-zero, 'git commit' will abort. The purpose of the hook is to edit the message file in place, and it is not suppressed by the `\--no-verify` option. A non-zero exit @@ -114,10 +114,10 @@ out the `Conflicts:` part of a merge's commit message. commit-msg ~~~~~~~~~~ -This hook is invoked by 'git-commit', and can be bypassed +This hook is invoked by 'git commit', and can be bypassed with `\--no-verify` option. It takes a single parameter, the name of the file that holds the proposed commit log message. -Exiting with non-zero status causes the 'git-commit' to +Exiting with non-zero status causes the 'git commit' to abort. The hook is allowed to edit the message file in place, and can @@ -131,30 +131,30 @@ The default 'commit-msg' hook, when enabled, detects duplicate post-commit ~~~~~~~~~~~ -This hook is invoked by 'git-commit'. It takes no +This hook is invoked by 'git commit'. It takes no parameter, and is invoked after a commit is made. This hook is meant primarily for notification, and cannot affect -the outcome of 'git-commit'. +the outcome of 'git commit'. pre-rebase ~~~~~~~~~~ -This hook is called by 'git-rebase' and can be used to prevent a branch +This hook is called by 'git rebase' and can be used to prevent a branch from getting rebased. post-checkout ~~~~~~~~~~~~~ -This hook is invoked when a 'git-checkout' is run after having updated the +This hook is invoked when a 'git checkout' is run after having updated the worktree. The hook is given three parameters: the ref of the previous HEAD, the ref of the new HEAD (which may or may not have changed), and a flag indicating whether the checkout was a branch checkout (changing branches, flag=1) or a file checkout (retrieving a file from the index, flag=0). -This hook cannot affect the outcome of 'git-checkout'. +This hook cannot affect the outcome of 'git checkout'. -It is also run after 'git-clone', unless the --no-checkout (-n) option is +It is also run after 'git clone', unless the --no-checkout (-n) option is used. The first parameter given to the hook is the null-ref, the second the ref of the new HEAD and the flag is always 1. @@ -165,10 +165,10 @@ properties. post-merge ~~~~~~~~~~ -This hook is invoked by 'git-merge', which happens when a 'git-pull' +This hook is invoked by 'git merge', which happens when a 'git pull' is done on a local repository. The hook takes a single parameter, a status flag specifying whether or not the merge being done was a squash merge. -This hook cannot affect the outcome of 'git-merge' and is not executed, +This hook cannot affect the outcome of 'git merge' and is not executed, if the merge failed due to conflicts. This hook can be used in conjunction with a corresponding pre-commit hook to @@ -181,7 +181,7 @@ pre-receive ~~~~~~~~~~~ This hook is invoked by 'git-receive-pack' on the remote repository, -which happens when a 'git-push' is done on a local repository. +which happens when a 'git push' is done on a local repository. Just before starting to update refs on the remote repository, the pre-receive hook is invoked. Its exit status determines the success or failure of the update. @@ -202,7 +202,7 @@ updated. If the hook exits with zero, updating of individual refs can still be prevented by the <<update,'update'>> hook. Both standard output and standard error output are forwarded to -'git-send-pack' on the other end, so you can simply `echo` messages +'git send-pack' on the other end, so you can simply `echo` messages for the user. [[update]] @@ -210,7 +210,7 @@ update ~~~~~~ This hook is invoked by 'git-receive-pack' on the remote repository, -which happens when a 'git-push' is done on a local repository. +which happens when a 'git push' is done on a local repository. Just before updating the ref on the remote repository, the update hook is invoked. Its exit status determines the success or failure of the ref update. @@ -241,7 +241,7 @@ implement access control which is finer grained than the one based on filesystem group. Both standard output and standard error output are forwarded to -'git-send-pack' on the other end, so you can simply `echo` messages +'git send-pack' on the other end, so you can simply `echo` messages for the user. The default 'update' hook, when enabled--and with @@ -253,7 +253,7 @@ post-receive ~~~~~~~~~~~~ This hook is invoked by 'git-receive-pack' on the remote repository, -which happens when a 'git-push' is done on a local repository. +which happens when a 'git push' is done on a local repository. It executes on the remote repository once after all the refs have been updated. @@ -270,7 +270,7 @@ both old and new values of all the refs in addition to their names. Both standard output and standard error output are forwarded to -'git-send-pack' on the other end, so you can simply `echo` messages +'git send-pack' on the other end, so you can simply `echo` messages for the user. The default 'post-receive' hook is empty, but there is @@ -283,7 +283,7 @@ post-update ~~~~~~~~~~~ This hook is invoked by 'git-receive-pack' on the remote repository, -which happens when a 'git-push' is done on a local repository. +which happens when a 'git push' is done on a local repository. It executes on the remote repository once after all the refs have been updated. @@ -301,20 +301,20 @@ updated values of the refs. You might consider it instead if you need them. When enabled, the default 'post-update' hook runs -'git-update-server-info' to keep the information used by dumb +'git update-server-info' to keep the information used by dumb transports (e.g., HTTP) up-to-date. If you are publishing a git repository that is accessible via HTTP, you should probably enable this hook. Both standard output and standard error output are forwarded to -'git-send-pack' on the other end, so you can simply `echo` messages +'git send-pack' on the other end, so you can simply `echo` messages for the user. pre-auto-gc ~~~~~~~~~~~ -This hook is invoked by 'git-gc --auto'. It takes no parameter, and -exiting with non-zero status from this script causes the 'git-gc --auto' +This hook is invoked by 'git gc --auto'. It takes no parameter, and +exiting with non-zero status from this script causes the 'git gc --auto' to abort. GIT diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 7df3cef46f..98c459dc82 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -56,10 +56,10 @@ the user's editor of choice) generally go into a file specified by `core.excludesfile` in the user's `~/.gitconfig`. The underlying git plumbing tools, such as -'git-ls-files' and 'git-read-tree', read +'git ls-files' and 'git read-tree', read `gitignore` patterns specified by command-line options, or from files specified by command-line options. Higher-level git -tools, such as 'git-status' and 'git-add', +tools, such as 'git status' and 'git add', use patterns from the sources specified above. Patterns have the following format: diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index cf465cb47e..99baa24a2d 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -22,7 +22,7 @@ git repository. OPTIONS ------- To control which revisions to show, the command takes options applicable to -the 'git-rev-list' command (see linkgit:git-rev-list[1]). +the 'git rev-list' command (see linkgit:git-rev-list[1]). This manual page describes only the most frequently used options. diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index 1befca98d4..3cd32d6803 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -64,7 +64,7 @@ objects/info/packs:: are available in this object store. Whenever a pack is added or removed, `git update-server-info` should be run to keep this file up-to-date if the repository is - published for dumb transports. 'git-repack' does this + published for dumb transports. 'git repack' does this by default. objects/info/alternates:: @@ -85,7 +85,7 @@ objects/info/http-alternates:: refs:: References are stored in subdirectories of this - directory. The 'git-prune' command knows to keep + directory. The 'git prune' command knows to keep objects reachable from refs found in this directory and its subdirectories. @@ -125,7 +125,7 @@ details. branches:: A slightly deprecated way to store shorthands to be used - to specify URL to 'git-fetch', 'git-pull' and 'git-push' + to specify URL to 'git fetch', 'git pull' and 'git push' commands is to store a file in `branches/<name>` and give 'name' to these commands in place of 'repository' argument. @@ -133,7 +133,7 @@ branches:: hooks:: Hooks are customization scripts used by various git commands. A handful of sample hooks are installed when - 'git-init' is run, but all of them are disabled by + 'git init' is run, but all of them are disabled by default. To enable, the `.sample` suffix has to be removed from the filename by renaming. Read linkgit:githooks[5] for more details about @@ -151,10 +151,10 @@ info/refs:: This file helps dumb transports discover what refs are available in this repository. If the repository is published for dumb transports, this file should be - regenerated by 'git-update-server-info' every time a tag + regenerated by 'git update-server-info' every time a tag or branch is created or modified. This is normally done from the `hooks/update` hook, which is run by the - 'git-receive-pack' command when you 'git-push' into the + 'git-receive-pack' command when you 'git push' into the repository. info/grafts:: @@ -168,14 +168,14 @@ info/grafts:: info/exclude:: This file, by convention among Porcelains, stores the exclude pattern list. `.gitignore` is the per-directory - ignore file. 'git-status', 'git-add', 'git-rm' and - 'git-clean' look at it but the core git commands do not look + ignore file. 'git status', 'git add', 'git rm' and + 'git clean' look at it but the core git commands do not look at it. See also: linkgit:gitignore[5]. remotes:: Stores shorthands to be used to give URL and default refnames to interact with remote repository to - 'git-fetch', 'git-pull' and 'git-push' commands. + 'git fetch', 'git pull' and 'git push' commands. logs:: Records of changes made to refs are stored in this diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index dc8fc3a18a..ecab0c09d0 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -260,7 +260,7 @@ index a042389..513feba 100644 +hello world, again ------------------------------------------------ -So 'git-diff' is comparing against something other than the head. +So 'git diff' is comparing against something other than the head. The thing that it's comparing against is actually the index file, which is stored in .git/index in a binary format, but whose contents we can examine with ls-files: @@ -275,9 +275,9 @@ hello world! hello world, again ------------------------------------------------ -So what our 'git-add' did was store a new blob and then put +So what our 'git add' did was store a new blob and then put a reference to it in the index file. If we modify the file again, -we'll see that the new modifications are reflected in the 'git-diff' +we'll see that the new modifications are reflected in the 'git diff' output: ------------------------------------------------ @@ -292,7 +292,7 @@ index 513feba..ba3da7b 100644 +again? ------------------------------------------------ -With the right arguments, 'git-diff' can also show us the difference +With the right arguments, 'git diff' can also show us the difference between the working directory and the last commit, or between the index and the last commit: @@ -316,7 +316,7 @@ index a042389..513feba 100644 +hello world, again ------------------------------------------------ -At any time, we can create a new commit using 'git-commit' (without +At any time, we can create a new commit using 'git commit' (without the "-a" option), and verify that the state committed only includes the changes stored in the index file, not the additional change that is still only in our working tree: @@ -334,11 +334,11 @@ index 513feba..ba3da7b 100644 +again? ------------------------------------------------ -So by default 'git-commit' uses the index to create the commit, not +So by default 'git commit' uses the index to create the commit, not the working tree; the "-a" option to commit tells it to first update the index with all changes in the working tree. -Finally, it's worth looking at the effect of 'git-add' on the index +Finally, it's worth looking at the effect of 'git add' on the index file: ------------------------------------------------ @@ -346,7 +346,7 @@ $ echo "goodbye, world" >closing.txt $ git add closing.txt ------------------------------------------------ -The effect of the 'git-add' was to add one entry to the index file: +The effect of the 'git add' was to add one entry to the index file: ------------------------------------------------ $ git ls-files --stage diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index cf0689cfeb..1c1606696e 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -67,7 +67,7 @@ You've now initialized the working directory--you may notice a new directory created, named ".git". Next, tell git to take a snapshot of the contents of all files under the -current directory (note the '.'), with 'git-add': +current directory (note the '.'), with 'git add': ------------------------------------------------ $ git add . @@ -75,7 +75,7 @@ $ git add . This snapshot is now stored in a temporary staging area which git calls the "index". You can permanently store the contents of the index in the -repository with 'git-commit': +repository with 'git commit': ------------------------------------------------ $ git commit @@ -94,15 +94,15 @@ $ git add file1 file2 file3 ------------------------------------------------ You are now ready to commit. You can see what is about to be committed -using 'git-diff' with the --cached option: +using 'git diff' with the --cached option: ------------------------------------------------ $ git diff --cached ------------------------------------------------ -(Without --cached, 'git-diff' will show you any changes that +(Without --cached, 'git diff' will show you any changes that you've made but not yet added to the index.) You can also get a brief -summary of the situation with 'git-status': +summary of the situation with 'git status': ------------------------------------------------ $ git status @@ -126,7 +126,7 @@ $ git commit This will again prompt you for a message describing the change, and then record a new version of the project. -Alternatively, instead of running 'git-add' beforehand, you can use +Alternatively, instead of running 'git add' beforehand, you can use ------------------------------------------------ $ git commit -a @@ -147,7 +147,7 @@ Git tracks content not files Many revision control systems provide an `add` command that tells the system to start tracking changes to a new file. Git's `add` command -does something simpler and more powerful: 'git-add' is used both for new +does something simpler and more powerful: 'git add' is used both for new and newly modified files, and in both cases it takes a snapshot of the given files and stages that content in the index, ready for inclusion in the next commit. @@ -376,7 +376,7 @@ alice$ git remote add bob /home/bob/myrepo ------------------------------------------------ With this, Alice can perform the first part of the "pull" operation -alone using the 'git-fetch' command without merging them with her own +alone using the 'git fetch' command without merging them with her own branch, using: ------------------------------------- @@ -384,7 +384,7 @@ alice$ git fetch bob ------------------------------------- Unlike the longhand form, when Alice fetches from Bob using a -remote repository shorthand set up with 'git-remote', what was +remote repository shorthand set up with 'git remote', what was fetched is stored in a remote tracking branch, in this case `bob/master`. So after this: @@ -428,7 +428,7 @@ bob$ git config --get remote.origin.url /home/alice/project ------------------------------------- -(The complete configuration created by 'git-clone' is visible using +(The complete configuration created by 'git clone' is visible using `git config -l`, and the linkgit:git-config[1] man page explains the meaning of each option.) @@ -458,7 +458,7 @@ Exploring history ----------------- Git history is represented as a series of interrelated commits. We -have already seen that the 'git-log' command can list those commits. +have already seen that the 'git log' command can list those commits. Note that first line of each git log entry also gives a name for the commit: @@ -471,7 +471,7 @@ Date: Tue May 16 17:18:22 2006 -0700 merge-base: Clarify the comments on post processing. ------------------------------------- -We can give this name to 'git-show' to see the details about this +We can give this name to 'git show' to see the details about this commit. ------------------------------------- @@ -529,13 +529,13 @@ $ git reset --hard HEAD^ # reset your current branch and working Be careful with that last command: in addition to losing any changes in the working directory, it will also remove all later commits from this branch. If this branch is the only branch containing those -commits, they will be lost. Also, don't use 'git-reset' on a +commits, they will be lost. Also, don't use 'git reset' on a publicly-visible branch that other developers pull from, as it will force needless merges on other developers to clean up the history. -If you need to undo changes that you have pushed, use 'git-revert' +If you need to undo changes that you have pushed, use 'git revert' instead. -The 'git-grep' command can search for strings in any version of your +The 'git grep' command can search for strings in any version of your project, so ------------------------------------- @@ -544,7 +544,7 @@ $ git grep "hello" v2.5 searches for all occurrences of "hello" in v2.5. -If you leave out the commit name, 'git-grep' will search any of the +If you leave out the commit name, 'git grep' will search any of the files it manages in your current directory. So ------------------------------------- @@ -554,7 +554,7 @@ $ git grep "hello" is a quick way to search just the files that are tracked by git. Many git commands also take sets of commits, which can be specified -in a number of ways. Here are some examples with 'git-log': +in a number of ways. Here are some examples with 'git log': ------------------------------------- $ git log v2.5..v2.6 # commits between v2.5 and v2.6 @@ -564,7 +564,7 @@ $ git log v2.5.. Makefile # commits since v2.5 which modify # Makefile ------------------------------------- -You can also give 'git-log' a "range" of commits where the first is not +You can also give 'git log' a "range" of commits where the first is not necessarily an ancestor of the second; for example, if the tips of the branches "stable" and "master" diverged from a common commit some time ago, then @@ -583,9 +583,9 @@ $ git log master..stable will show the list of commits made on the stable branch but not the master branch. -The 'git-log' command has a weakness: it must present commits in a +The 'git log' command has a weakness: it must present commits in a list. When the history has lines of development that diverged and -then merged back together, the order in which 'git-log' presents +then merged back together, the order in which 'git log' presents those commits is meaningless. Most projects with multiple contributors (such as the Linux kernel, @@ -609,7 +609,7 @@ of the file: $ git diff v2.5:Makefile HEAD:Makefile.in ------------------------------------- -You can also use 'git-show' to see any such file: +You can also use 'git show' to see any such file: ------------------------------------- $ git show v2.5:Makefile diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index 065441df64..1ef55fffcf 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -360,7 +360,7 @@ There are three main tools that can be used for this: * linkgit:git-pull[1] that does fetch and merge in one go. -Note the last point. Do 'not' use 'git-pull' unless you actually want +Note the last point. Do 'not' use 'git pull' unless you actually want to merge the remote branch. Getting changes out is easy: @@ -397,7 +397,7 @@ Please pull from <url> <branch> ------------------------------------- -In that case, 'git-pull' can do the fetch and merge in one go, as +In that case, 'git pull' can do the fetch and merge in one go, as follows. .Push/pull: Merging remote topics @@ -449,7 +449,7 @@ problem. If you receive such a patch series (as maintainer, or perhaps as a reader of the mailing list it was sent to), save the mails to files, -create a new topic branch and use 'git-am' to import the commits: +create a new topic branch and use 'git am' to import the commits: .format-patch/am: Importing patches [caption="Recipe: "] diff --git a/Documentation/i18n.txt b/Documentation/i18n.txt index 708da6ca31..625d3154ea 100644 --- a/Documentation/i18n.txt +++ b/Documentation/i18n.txt @@ -21,7 +21,7 @@ project find it more convenient to use legacy encodings, git does not forbid it. However, there are a few things to keep in mind. -. 'git-commit' and 'git-commit-tree' issues +. 'git commit' and 'git commit-tree' issues a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to @@ -37,7 +37,7 @@ of `i18n.commitencoding` in its `encoding` header. This is to help other people who look at them later. Lack of this header implies that the commit log message is encoded in UTF-8. -. 'git-log', 'git-show', 'git-blame' and friends look at the +. 'git log', 'git show', 'git blame' and friends look at the `encoding` header of a commit object, and try to re-code the log message into UTF-8 unless otherwise specified. You can specify the desired output encoding with diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index fec3394305..81ac823964 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -59,8 +59,13 @@ option can be used to override --squash. Use the given merge strategy; can be supplied more than once to specify them in the order they should be tried. If there is no `-s` option, a built-in list of strategies - is used instead ('git-merge-recursive' when merging a single - head, 'git-merge-octopus' otherwise). + is used instead ('git merge-recursive' when merging a single + head, 'git merge-octopus' otherwise). + +-X <option>:: +--strategy-option=<option>:: + Pass merge strategy specific option through to the merge + strategy. --summary:: --no-summary:: diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 42910a3d5e..a5bc1dbb95 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -1,6 +1,11 @@ MERGE STRATEGIES ---------------- +The merge mechanism ('git-merge' and 'git-pull' commands) allows the +backend 'merge strategies' to be chosen with `-s` option. Some strategies +can also take their own options, which can be passed by giving `-X<option>` +arguments to 'git-merge' and/or 'git-pull'. + resolve:: This can only resolve two heads (i.e. the current branch and another branch you pulled from) using a 3-way merge @@ -20,6 +25,27 @@ recursive:: Additionally this can detect and handle merges involving renames. This is the default merge strategy when pulling or merging one branch. ++ +The 'recursive' strategy can take the following options: + +ours;; + This option forces conflicting hunks to be auto-resolved cleanly by + favoring 'our' version. Changes from the other tree that do not + conflict with our side are reflected to the merge result. ++ +This should not be confused with the 'ours' merge strategy, which does not +even look at what the other tree contains at all. It discards everything +the other tree did, declaring 'our' history contains all that happened in it. + +theirs;; + This is opposite of 'ours'. + +subtree[=path];; + This option is a more advanced form of 'subtree' strategy, where + the strategy makes a guess on how two trees must be shifted to + match with each other when merging. Instead, the specified path + is prefixed (or stripped from the beginning) to make the shape of + two trees to match. octopus:: This resolves cases with more than two heads, but refuses to do @@ -33,7 +59,8 @@ ours:: merge is always that of the current branch head, effectively ignoring all changes from all other branches. It is meant to be used to supersede old development history of side - branches. + branches. Note that this is different from the -Xours option to + the 'recursive' merge strategy. subtree:: This is a modified recursive strategy. When merging trees A and diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 53a9168ba7..1686a54d22 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -134,6 +134,7 @@ The placeholders are: - '%C(...)': color specification, as described in color.branch.* config option - '%m': left, right or boundary mark - '%n': newline +- '%%': a raw '%' - '%x00': print a byte from a hex code - '%w([<w>[,<i1>[,<i2>]]])': switch line wrapping, like the -w option of linkgit:git-shortlog[1]. diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index 0551ebdfaf..5dd6e5a0c7 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -38,7 +38,7 @@ must know this is the expected usage pattern for a branch. [NOTE] You never do your own development on branches that appear on the right hand side of a <refspec> colon on `Pull:` lines; -they are to be updated by 'git-fetch'. If you intend to do +they are to be updated by 'git fetch'. If you intend to do development derived from a remote branch `B`, have a `Pull:` line to track it (i.e. `Pull: B:remote-B`), and have a separate branch `my-B` to do your development on top of it. The latter @@ -50,13 +50,13 @@ on the remote branch, merge it into your development branch with + [NOTE] There is a difference between listing multiple <refspec> -directly on 'git-pull' command line and having multiple +directly on 'git pull' command line and having multiple `Pull:` <refspec> lines for a <repository> and running -'git-pull' command without any explicit <refspec> parameters. +'git pull' command without any explicit <refspec> parameters. <refspec> listed explicitly on the command line are always merged into the current branch after fetching. In other words, if you list more than one remote refs, you would be making -an Octopus. While 'git-pull' run without any explicit <refspec> +an Octopus. While 'git pull' run without any explicit <refspec> parameter takes default <refspec>s from `Pull:` lines, it merges only the first <refspec> found into the current branch, after fetching all the remote refs. This is because making an diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 1f57aed337..81c0e6f184 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -225,30 +225,43 @@ endif::git-rev-list[] --all:: - Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the + Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. ---branches:: +--branches[=pattern]:: - Pretend as if all the refs in `$GIT_DIR/refs/heads` are listed - on the command line as '<commit>'. + Pretend as if all the refs in `refs/heads` are listed + on the command line as '<commit>'. If `pattern` is given, limit + branches to ones matching given shell glob. If pattern lacks '?', + '*', or '[', '/*' at the end is implied. ---tags:: +--tags[=pattern]:: - Pretend as if all the refs in `$GIT_DIR/refs/tags` are listed - on the command line as '<commit>'. + Pretend as if all the refs in `refs/tags` are listed + on the command line as '<commit>'. If `pattern` is given, limit + tags to ones matching given shell glob. If pattern lacks '?', '*', + or '[', '/*' at the end is implied. ---remotes:: +--remotes[=pattern]:: + + Pretend as if all the refs in `refs/remotes` are listed + on the command line as '<commit>'. If `pattern`is given, limit + remote tracking branches to ones matching given shell glob. + If pattern lacks '?', '*', or '[', '/*' at the end is implied. + +--glob=glob-pattern:: + Pretend as if all the refs matching shell glob `glob-pattern` + are listed on the command line as '<commit>'. Leading 'refs/', + is automatically prepended if missing. If pattern lacks '?', '*', + or '[', '/*' at the end is implied. - Pretend as if all the refs in `$GIT_DIR/refs/remotes` are listed - on the command line as '<commit>'. ifndef::git-rev-list[] --bisect:: - Pretend as if the bad bisection ref `$GIT_DIR/refs/bisect/bad` + Pretend as if the bad bisection ref `refs/bisect/bad` was listed and as if it was followed by `--not` and the good - bisection refs `$GIT_DIR/refs/bisect/good-*` on the command + bisection refs `refs/bisect/good-*` on the command line. endif::git-rev-list[] @@ -548,10 +561,10 @@ Bisection Helpers Limit output to the one commit object which is roughly halfway between included and excluded commits. Note that the bad bisection ref -`$GIT_DIR/refs/bisect/bad` is added to the included commits (if it -exists) and the good bisection refs `$GIT_DIR/refs/bisect/good-*` are +`refs/bisect/bad` is added to the included commits (if it +exists) and the good bisection refs `refs/bisect/good-*` are added to the excluded commits (if they exist). Thus, supposing there -are no refs in `$GIT_DIR/refs/bisect/`, if +are no refs in `refs/bisect/`, if ----------------------------------------------------------------------- $ git rev-list --bisect foo ^bar ^baz @@ -572,7 +585,7 @@ one. --bisect-vars:: This calculates the same as `--bisect`, except that refs in -`$GIT_DIR/refs/bisect/` are not used, and except that this outputs +`refs/bisect/` are not used, and except that this outputs text ready to be eval'ed by the shell. These lines will assign the name of the midpoint revision to the variable `bisect_rev`, and the expected number of commits to be tested after `bisect_rev` is tested @@ -586,7 +599,7 @@ number of commits to be tested if `bisect_rev` turns out to be bad to This outputs all the commit objects between the included and excluded commits, ordered by their distance to the included and excluded -commits. Refs in `$GIT_DIR/refs/bisect/` are not used. The farthest +commits. Refs in `refs/bisect/` are not used. The farthest from them is displayed first. (This is the only one displayed by `--bisect`.) + diff --git a/Documentation/technical/api-directory-listing.txt b/Documentation/technical/api-directory-listing.txt index 5bbd18f020..add6f435b5 100644 --- a/Documentation/technical/api-directory-listing.txt +++ b/Documentation/technical/api-directory-listing.txt @@ -58,6 +58,9 @@ The result of the enumeration is left in these fields:: Calling sequence ---------------- +Note: index may be looked at for .gitignore files that are CE_SKIP_WORKTREE +marked. If you to exclude files, make sure you have loaded index first. + * Prepare `struct dir_struct dir` and clear it with `memset(&dir, 0, sizeof(dir))`. diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt index 8994859c81..44876fa703 100644 --- a/Documentation/technical/api-run-command.txt +++ b/Documentation/technical/api-run-command.txt @@ -51,7 +51,7 @@ The functions above do the following: ENOENT; a diagnostic is printed only if .silent_exec_failure is 0. . Otherwise, the program is run. If it terminates regularly, its exit - code is returned. No diagnistic is printed, even if the exit code is + code is returned. No diagnostic is printed, even if the exit code is non-zero. . If the program terminated due to a signal, then the return value is the diff --git a/Documentation/technical/api-strbuf.txt b/Documentation/technical/api-strbuf.txt index a0e0f850f8..afe2759951 100644 --- a/Documentation/technical/api-strbuf.txt +++ b/Documentation/technical/api-strbuf.txt @@ -199,6 +199,10 @@ character if the letter `n` appears after a `%`. The function returns the length of the placeholder recognized and `strbuf_expand()` skips over it. + +The format `%%` is automatically expanded to a single `%` as a quoting +mechanism; callers do not need to handle the `%` placeholder themselves, +and the callback function will not be invoked for this placeholder. ++ All other characters (non-percent and not skipped ones) are copied verbatim to the strbuf. If the callback returned zero, meaning that the placeholder is unknown, then the percent sign is copied, too. @@ -214,6 +218,13 @@ which can be used by the programmer of the callback as she sees fit. placeholder and replacement string. The array needs to be terminated by an entry with placeholder set to NULL. +`strbuf_addbuf_percentquote`:: + + Append the contents of one strbuf to another, quoting any + percent signs ("%") into double-percents ("%%") in the + destination. This is useful for literal data to be fed to either + strbuf_expand or to the *printf family of functions. + `strbuf_addf`:: Add a formatted string to the buffer. diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 7950eeeda4..369f91d3b9 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -36,7 +36,7 @@ Git Transport The Git transport starts off by sending the command and repository on the wire using the pkt-line format, followed by a NUL byte and a -hostname paramater, terminated by a NUL byte. +hostname parameter, terminated by a NUL byte. 0032git-upload-pack /project.git\0host=myserver.com\0 @@ -149,7 +149,7 @@ advertisement list at all, but other refs may still appear. The stream MUST include capability declarations behind a NUL on the first ref. The peeled value of a ref (that is "ref^{}") MUST be immediately after the ref itself, if presented. A conforming server -MUST peel the ref if its an annotated tag. +MUST peel the ref if it's an annotated tag. ---- advertised-refs = (no-refs / list-of-refs) @@ -261,7 +261,7 @@ Without either multi_ack or multi_ack_detailed: * upload-pack sends "NAK" on a flush-pkt if no common object has been found yet. If one has been found, and thus an ACK - was already sent, its silent on the flush-pkt. + was already sent, it's silent on the flush-pkt. After the client has gotten enough ACK responses that it can determine that the server has enough information to send an efficient packfile @@ -271,9 +271,9 @@ as common with the server, or the --date-order queue is empty), or the client determines that it wants to give up (in the canonical implementation, this is determined when the client sends 256 'have' lines without getting any of them ACKed by the server - meaning there is nothing in common and -the server should just send all it's objects), then the client will send +the server should just send all of its objects), then the client will send a 'done' command. The 'done' command signals to the server that the client -is ready to receive it's packfile data. +is ready to receive its packfile data. However, the 256 limit *only* turns on in the canonical client implementation if we have received at least one "ACK %s continue" @@ -286,7 +286,7 @@ ACK after 'done' if there is at least one common base and multi_ack or multi_ack_detailed is enabled. The server always sends NAK after 'done' if there is no common base found. -Then the server will start sending it's packfile data. +Then the server will start sending its packfile data. ---- server-response = *ack_multi ack / nak @@ -331,7 +331,7 @@ An incremental update (fetch) response might look like this: C: 0009done\n - S: 003aACK 74730d410fcb6603ace96f1dc55ea6196122532d\n + S: 0031ACK 74730d410fcb6603ace96f1dc55ea6196122532d\n S: [PACKFILE] ---- @@ -488,7 +488,7 @@ An example client/server communication might look like this: C: 0000 C: [PACKDATA] - S: 000aunpack ok\n - S: 0014ok refs/heads/debug\n - S: 0026ng refs/heads/master non-fast-forward\n + S: 000eunpack ok\n + S: 0018ok refs/heads/debug\n + S: 002ang refs/heads/master non-fast-forward\n ---- diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index 1892d3eeac..fd1a593149 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -60,7 +60,7 @@ doesn't, as in the following diagram: If the client wants x,y and starts out by saying have F,S, the server doesn't know what F,S is. Eventually the client says "have d" and the server sends "ACK d continue" to let the client know to stop -walking down that line (so don't send c-b-a), but its not done yet, +walking down that line (so don't send c-b-a), but it's not done yet, it needs a base for x. The client keeps going with S-R-Q, until a gets reached, at which point the server has a clear base and it all ends. @@ -181,7 +181,7 @@ delete-refs ----------- If the server sends back the 'delete-refs' capability, it means that -it is capable of accepting an zero-id value as the target +it is capable of accepting a zero-id value as the target value of a reference update. It is not sent back by the client, it simply informs the client that it can be sent zero-id values to delete references. diff --git a/Documentation/urls-remotes.txt b/Documentation/urls-remotes.txt index 2a0e7b8944..00f7e79c44 100644 --- a/Documentation/urls-remotes.txt +++ b/Documentation/urls-remotes.txt @@ -52,8 +52,8 @@ following format: ------------ -`Push:` lines are used by 'git-push' and -`Pull:` lines are used by 'git-pull' and 'git-fetch'. +`Push:` lines are used by 'git push' and +`Pull:` lines are used by 'git pull' and 'git fetch'. Multiple `Push:` and `Pull:` lines may be specified for additional branch mappings. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index b169836684..fe6fb722da 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1196,7 +1196,7 @@ the time, you will want to commit your changes before you can merge, and if you don't, then linkgit:git-stash[1] can take these changes away while you're doing the merge, and reapply them afterwards. -If the changes are independant enough, Git will automatically complete +If the changes are independent enough, Git will automatically complete the merge and commit the result (or reuse an existing commit in case of <<fast-forwards,fast-forward>>, see below). On the other hand, if there are conflicts--for example, if the same file is @@ -3640,6 +3640,26 @@ Did you forget to 'git add'? Unable to checkout '261dfac35cb99d380eb966e102c1197139f7fa24' in submodule path 'a' ------------------------------------------------- +In older git versions it could be easily forgotten to commit new or modified +files in a submodule, which silently leads to similar problems as not pushing +the submodule changes. Starting with git 1.7.0 both "git status" and "git diff" +in the superproject show submodules as modified when they contain new or +modified files to protect against accidentally committing such a state. "git +diff" will also add a "-dirty" to the work tree side when generating patch +output or used with the --submodule option: + +------------------------------------------------- +$ git diff +diff --git a/sub b/sub +--- a/sub ++++ b/sub +@@ -1 +1 @@ +-Subproject commit 3f356705649b5d566d97ff843cf193359229a453 ++Subproject commit 3f356705649b5d566d97ff843cf193359229a453-dirty +$ git diff --submodule +Submodule sub 3f35670..3f35670-dirty: +------------------------------------------------- + You also should not rewind branches in a submodule beyond commits that were ever recorded in any superproject. |