diff options
Diffstat (limited to 'Documentation')
35 files changed, 808 insertions, 296 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index e3af089ecf..711cb9171e 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -551,6 +551,51 @@ Writing Documentation: documentation, please see the documentation-related advice in the Documentation/SubmittingPatches file). + In order to ensure the documentation is inclusive, avoid assuming + that an unspecified example person is male or female, and think + twice before using "he", "him", "she", or "her". Here are some + tips to avoid use of gendered pronouns: + + - Prefer succinctness and matter-of-factly describing functionality + in the abstract. E.g. + + --short:: Emit output in the short-format. + + and avoid something like these overly verbose alternatives: + + --short:: Use this to emit output in the short-format. + --short:: You can use this to get output in the short-format. + --short:: A user who prefers shorter output could.... + --short:: Should a person and/or program want shorter output, he + she/they/it can... + + This practice often eliminates the need to involve human actors in + your description, but it is a good practice regardless of the + avoidance of gendered pronouns. + + - When it becomes awkward to stick to this style, prefer "you" when + addressing the the hypothetical user, and possibly "we" when + discussing how the program might react to the user. E.g. + + You can use this option instead of --xyz, but we might remove + support for it in future versions. + + while keeping in mind that you can probably be less verbose, e.g. + + Use this instead of --xyz. This option might be removed in future + versions. + + - If you still need to refer to an example person that is + third-person singular, you may resort to "singular they" to avoid + "he/she/him/her", e.g. + + A contributor asks their upstream to pull from them. + + Note that this sounds ungrammatical and unnatural to those who + learned that "they" is only used for third-person plural, e.g. + those who learn English as a second language in some parts of the + world. + Every user-visible change should be reflected in the documentation. The same general rule as for code applies -- imitate the existing conventions. diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt index 2d10eea7a9..45eb84d8b4 100644 --- a/Documentation/MyFirstObjectWalk.txt +++ b/Documentation/MyFirstObjectWalk.txt @@ -691,7 +691,7 @@ help understand. In our case, that means we omit trees and blobs not directly referenced by `HEAD` or `HEAD`'s history, because we begin the walk with only `HEAD` in the `pending` list.) -First, we'll need to `#include "list-objects-filter-options.h`" and set up the +First, we'll need to `#include "list-objects-filter-options.h"` and set up the `struct list_objects_filter_options` at the top of the function. ---- @@ -779,7 +779,7 @@ Count all the objects within and modify the print statement: while ((oid = oidset_iter_next(&oit))) omitted_count++; - printf("commits %d\nblobs %d\ntags %d\ntrees%d\nomitted %d\n", + printf("commits %d\nblobs %d\ntags %d\ntrees %d\nomitted %d\n", commit_count, blob_count, tag_count, tree_count, omitted_count); ---- diff --git a/Documentation/RelNotes/2.33.0.txt b/Documentation/RelNotes/2.33.0.txt index a69531c1ef..893c18bfdd 100644 --- a/Documentation/RelNotes/2.33.0.txt +++ b/Documentation/RelNotes/2.33.0.txt @@ -1,18 +1,6 @@ Git 2.33 Release Notes ====================== -Backward compatibility notes ----------------------------- - - * The "-m" option in "git log -m" that does not specify which format, - if any, of diff is desired did not have any visible effect; it now - implies some form of diff (by default "--patch") is produced. - - You can disable the diff output with "git log -m --no-patch", but - then there probably isn't much point in passing "-m" in the first - place ;-). - - Updates since Git 2.32 ---------------------- @@ -24,15 +12,14 @@ UI, Workflows & Features "smtp-server" that is meant to name the server to instead name the command to talk to the server. - * The "-m" option in "git log -m" that does not specify which format, - if any, of diff is desired did not have any visible effect; it now - implies some form of diff (by default "--patch") is produced. - * The userdiff pattern for C# learned the token "record". * "git rev-list" learns to omit the "commit <object-name>" header lines from the output with the `--no-commit-header` option. + * "git worktree add --lock" learned to record why the worktree is + locked with a custom message. + Performance, Internal Implementation, Development Support etc. @@ -45,7 +32,7 @@ Performance, Internal Implementation, Development Support etc. reduce code duplication. * Repeated rename detections in a sequence of mergy operations have - been optimize out. + been optimized out for the 'ort' merge strategy. * Preliminary clean-up of tests before the main reftable changes hits the codebase. @@ -62,6 +49,44 @@ Performance, Internal Implementation, Development Support etc. * GitHub Actions / CI update. (merge 0dc787a9f2 js/ci-windows-update later to maint). + * Object accesses in repositories with many alternate object store + have been optimized. + + * "git log" has been optimized not to waste cycles to load ref + decoration data that may not be needed. + + * Many "printf"-like helper functions we have have been annotated + with __attribute__() to catch placeholder/parameter mismatches. + + * Tests that cover protocol bits have been updated and helpers + used there have been consolidated. + + * The CI gained a new job to run "make sparse" check. + + * "git status" codepath learned to work with sparsely populated index + without hydrating it fully. + + * A guideline for gender neutral documentation has been added. + + * Documentation on "git diff -l<n>" and diff.renameLimit have been + updated, and the defaults for these limits have been raised. + + * The completion support used to offer alternate spelling of options + that exist only for compatibility, which has been corrected. + + * "TEST_OUTPUT_DIRECTORY=there make test" failed to work, which has + been corrected. + + * "git bundle" gained more test coverage. + + * "git read-tree" had a codepath where blobs are fetched one-by-one + from the promisor remote, which has been corrected to fetch in bulk. + + * Rewrite of "git submodule" in C continues. + + * "git checkout" and "git commit" learn to work without unnecessarily + expanding sparse indexes. + Fixes since v2.32 ----------------- @@ -183,6 +208,32 @@ Fixes since v2.32 and adds to guidelines to do so. (merge 46a237f42f ds/gender-neutral-doc later to maint). + * "git commit --allow-empty-message" won't abort the operation upon + an empty message, but the hint shown in the editor said otherwise. + (merge 6f70f00b4f hj/commit-allow-empty-message later to maint). + + * The code that gives an error message in "git multi-pack-index" when + no subcommand is given tried to print a NULL pointer as a strong, + which has been corrected. + (merge 88617d11f9 tb/reverse-midx later to maint). + + * CI update. + (merge a066a90db6 js/ci-check-whitespace-updates later to maint). + + * Documentation fix for "git pull --rebase=no". + (merge d3236becec fc/pull-no-rebase-merges-theirs-into-ours later to maint). + + * A race between repacking and using pack bitmaps has been corrected. + (merge dc1daacdcc jk/check-pack-valid-before-opening-bitmap later to maint). + + * The local changes stashed by "git merge --autostash" were lost when + the merge failed in certain ways, which has been corrected. + + * Windows rmdir() equivalent behaves differently from POSIX ones in + that when used on a symbolic link that points at a directory, the + target directory gets removed, which has been corrected. + (merge 3e7d4888e5 tb/mingw-rmdir-symlink-to-directory later to maint). + * Other code cleanup, docfix, build fix, etc. (merge bfe35a6165 ah/doc-describe later to maint). (merge f302c1e4aa jc/clarify-revision-range later to maint). @@ -218,3 +269,11 @@ Fixes since v2.32 (merge 5632e838f8 rs/khash-alloc-cleanup later to maint). (merge b1d87fbaf1 jk/typofix later to maint). (merge e04170697a ab/gitignore-discovery-doc later to maint). + (merge 8232a0ff48 dl/packet-read-response-end-fix later to maint). + (merge eb448631fb dl/diff-merge-base later to maint). + (merge c510928a25 hn/refs-debug-empty-prefix later to maint). + (merge ddcb189d9d tb/bitmap-type-filter-comment-fix later to maint). + (merge 878b399734 pb/submodule-recurse-doc later to maint). + (merge 734283855f jk/config-env-doc later to maint). + (merge 482e1488a9 ab/getcwd-test later to maint). + (merge f0b922473e ar/doc-markup-fix later to maint). diff --git a/Documentation/RelNotes/2.34.0.txt b/Documentation/RelNotes/2.34.0.txt new file mode 100644 index 0000000000..d21a63ed83 --- /dev/null +++ b/Documentation/RelNotes/2.34.0.txt @@ -0,0 +1,196 @@ +Git 2.34 Release Notes +====================== + +Updates since Git 2.33 +---------------------- + +UI, Workflows & Features + + * Pathname expansion (like "~username/") learned a way to specify a + location relative to Git installation (e.g. its $sharedir which is + $(prefix)/share), with "%(prefix)". + + * Use `ort` instead of `recursive` as the default merge strategy. + + * The userdiff pattern for "java" language has been updated. + + * "git rebase" by default skips changes that are equivalent to + commits that are already in the history the branch is rebased onto; + give messages when this happens to let the users be aware of + skipped commits, and also teach them how to tell "rebase" to keep + duplicated changes. + + * The advice message that "git cherry-pick" gives when it asks + conflicted replay of a commit to be resolved by the end user has + been updated. + + * After "git clone --recurse-submodules", all submodules are cloned + but they are not by default recursed into by other commands. With + submodule.stickyRecursiveClone configuration set, submodule.recurse + configuration is set to true in a repository created by "clone" + with "--recurse-submodules" option. + + * The logic for auto-correction of misspelt subcommands learned to go + interactive when the help.autocorrect configuration variable is set + to 'prompt'. + + +Performance, Internal Implementation, Development Support etc. + + * "git bisect" spawned "git show-branch" only to pretty-print the + title of the commit after checking out the next version to be + tested; this has been rewritten in C. + + * "git add" can work better with the sparse index. + + * Support for ancient versions of cURL library (pre 7.19.4) has been + dropped. + + * A handful of tests that assumed implementation details of files + backend for refs have been cleaned up. + + * trace2 logs learned to show parent process name to see in what + context Git was invoked. + + * Loading of ref tips to prepare for common ancestry negotiation in + "git fetch-pack" has been optimized by taking advantage of the + commit graph when available. + + * Remind developers that the userdiff patterns should be kept simple + and permissive, assuming that the contents they apply are always + syntactically correct. + + * The current implementation of GIT_TEST_FAIL_PREREQS is broken in + that checking for the lack of a prerequisite would not work. Avoid + the use of "if ! test_have_prereq X" in a test script. + + * The revision traversal API has been optimized by taking advantage + of the commit-graph, when available, to determine if a commit is + reachable from any of the existing refs. + + * "git fetch --quiet" optimization to avoid useless computation of + info that will never be displayed. + + * Callers from older advice_config[] based API has been updated to + use the newer advice_if_enabled() and advice_enabled() API. + + +Fixes since v2.33 +----------------- + + * Input validation of "git pack-objects --stdin-packs" has been + corrected. + (merge 561fa03529 ab/pack-stdin-packs-fix later to maint). + + * Bugfix for common ancestor negotiation recently introduced in "git + push" code path. + (merge 82823118b9 jt/push-negotiation-fixes later to maint). + + * "git pull" had various corner cases that were not well thought out + around its --rebase backend, e.g. "git pull --ff-only" did not stop + but went ahead and rebased when the history on other side is not a + descendant of our history. The series tries to fix them up. + (merge 6f843a3355 en/pull-conflicting-options later to maint). + + * "git apply" miscounted the bytes and failed to read to the end of + binary hunks. + (merge 46d723ce57 jk/apply-binary-hunk-parsing-fix later to maint). + + * "git range-diff" code clean-up. + (merge c4d5907324 jk/range-diff-fixes later to maint). + + * "git commit --fixup" now works with "--edit" again, after it was + broken in v2.32. + (merge 8ef6aad664 jk/commit-edit-fixup-fix later to maint). + + * Use upload-artifacts v1 (instead of v2) for 32-bit linux, as the + new version has a blocker bug for that architecture. + (merge 3cf9bb36bf cb/ci-use-upload-artifacts-v1 later to maint). + + * Checking out all the paths from HEAD during the last conflicted + step in "git rebase" and continuing would cause the step to be + skipped (which is expected), but leaves MERGE_MSG file behind in + $GIT_DIR and confuses the next "git commit", which has been + corrected. + (merge e5ee33e855 pw/rebase-skip-final-fix later to maint). + + * Various bugs in "git rebase -r" have been fixed. + (merge f2563c9ef3 pw/rebase-r-fixes later to maint). + + * mmap() imitation used to call xmalloc() that dies upon malloc() + failure, which has been corrected to just return an error to the + caller to be handled. + (merge 95b4ff3931 rs/git-mmap-uses-malloc later to maint). + + * "git diff --relative" segfaulted and/or produced incorrect result + when there are unmerged paths. + (merge 8174627b3d dd/diff-files-unmerged-fix later to maint). + + * The delayed checkout code path in "git checkout" etc. were chatty + even when --quiet and/or --no-progress options were given. + (merge 7a132c628e mt/quiet-with-delayed-checkout later to maint). + + * "git branch -D <branch>" used to refuse to remove a broken branch + ref that points at a missing commit, which has been corrected. + (merge 597a977489 rs/branch-allow-deleting-dangling later to maint). + + * Build update for Apple clang. + (merge f32c5d3716 cb/makefile-apple-clang later to maint). + + * The parser for the "--nl" option of "git column" has been + corrected. + (merge c93ca46cf5 sg/column-nl later to maint). + + * "git upload-pack" which runs on the other side of "git fetch" + forgot to take the ref namespaces into account when handling + want-ref requests. + (merge 53a66ec37c ka/want-ref-in-namespace later to maint). + + * The sparse-index support can corrupt the index structure by storing + a stale and/or uninitialized data, which has been corrected. + (merge d9e9b44d7a jh/sparse-index-resize-fix later to maint). + + * Buggy tests could damage repositories outside the throw-away test + area we created. We now by default export GIT_CEILING_DIRECTORIES + to limit the damage from such a stray test. + (merge 614c3d8f2e sg/set-ceiling-during-tests later to maint). + + * Even when running "git send-email" without its own threaded + discussion support, a threading related header in one message is + carried over to the subsequent message to result in an unwanted + threading, which has been corrected. + (merge e082113484 mh/send-email-reset-in-reply-to later to maint). + + * The output from "git fast-export", when its anonymization feature + is in use, showed an annotated tag incorrectly. + (merge 2f040a9671 tk/fast-export-anonymized-tag-fix later to maint). + + * Doc update plus improved error reporting. + (merge 1e93770888 jk/log-warn-on-bogus-encoding later to maint). + + * Other code cleanup, docfix, build fix, etc. + (merge 1d9c8daef8 ab/bundle-doc later to maint). + (merge 81483fe613 en/merge-strategy-docs later to maint). + (merge 626beebdf8 js/log-protocol-version later to maint). + (merge 00e302da76 cb/builtin-merge-format-string-fix later to maint). + (merge ad51ae4dc0 cb/ci-freebsd-update later to maint). + (merge be6444d1ca fc/completion-updates later to maint). + (merge ff7b83f562 ti/tcsh-completion-regression-fix later to maint). + (merge 325b06deda sg/make-fix-ar-invocation later to maint). + (merge bd72824c60 me/t5582-cleanup later to maint). + (merge f6a5af0f62 ga/send-email-sendmail-cmd later to maint). + (merge f58c7468cd ab/ls-remote-packet-trace later to maint). + (merge 0160f7e725 ab/rebase-fatal-fatal-fix later to maint). + (merge a16eb6b1ff js/maintenance-launchctl-fix later to maint). + (merge c21b2511c2 jk/t5323-no-pack-test-fix later to maint). + (merge 5146c2f148 mh/credential-leakfix later to maint). + (merge 1549577338 dd/t6300-wo-gpg-fix later to maint). + (merge 66e905b7dd rs/xopen-reports-open-failures later to maint). + (merge 469888e6a5 es/walken-tutorial-fix later to maint). + (merge 88682b016d ba/object-info later to maint). + (merge b45c172e51 ab/gc-log-rephrase later to maint). + (merge ccdd5d1eb1 ab/mailmap-leakfix later to maint). + (merge 6540b71614 cb/remote-ndebug-fix later to maint). + (merge e4f8d27585 rs/show-branch-simplify later to maint). + (merge e124ecf7f7 rs/archive-use-object-id later to maint). + (merge cebead1ebf cb/ci-build-pedantic later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 3e215f4d80..e409022d93 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -74,10 +74,9 @@ the feature triggers the new behavior when it should, and to show the feature does not trigger when it shouldn't. After any code change, make sure that the entire test suite passes. -If you have an account at GitHub (and you can get one for free to work -on open source projects), you can use their Travis CI integration to -test your changes on Linux, Mac (and hopefully soon Windows). See -GitHub-Travis CI hints section for details. +Pushing to a fork of https://github.com/git/git will use their CI +integration to test your changes on Linux, Mac and Windows. See the +<<GHCI,GitHub CI>> section for details. Do not forget to update the documentation to describe the updated behavior and make sure that the resulting documentation set formats @@ -167,6 +166,85 @@ or, on an older version of Git without support for --pretty=reference: git show -s --date=short --pretty='format:%h (%s, %ad)' <commit> .... +[[sign-off]] +=== Certify your work by adding your `Signed-off-by` trailer + +To improve tracking of who did what, we ask you to certify that you +wrote the patch or have the right to pass it on under the same license +as ours, by "signing off" your patch. Without sign-off, we cannot +accept your patches. + +If (and only if) you certify the below D-C-O: + +[[dco]] +.Developer's Certificate of Origin 1.1 +____ +By making a contribution to this project, I certify that: + +a. The contribution was created in whole or in part by me and I + have the right to submit it under the open source license + indicated in the file; or + +b. The contribution is based upon previous work that, to the best + of my knowledge, is covered under an appropriate open source + license and I have the right under that license to submit that + work with modifications, whether created in whole or in part + by me, under the same open source license (unless I am + permitted to submit under a different license), as indicated + in the file; or + +c. The contribution was provided directly to me by some other + person who certified (a), (b) or (c) and I have not modified + it. + +d. I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. +____ + +you add a "Signed-off-by" trailer to your commit, that looks like +this: + +.... + Signed-off-by: Random J Developer <random@developer.example.org> +.... + +This line can be added by Git if you run the git-commit command with +the -s option. + +Notice that you can place your own `Signed-off-by` trailer when +forwarding somebody else's patch with the above rules for +D-C-O. Indeed you are encouraged to do so. Do not forget to +place an in-body "From: " line at the beginning to properly attribute +the change to its true author (see (2) above). + +This procedure originally came from the Linux kernel project, so our +rule is quite similar to theirs, but what exactly it means to sign-off +your patch differs from project to project, so it may be different +from that of the project you are accustomed to. + +[[real-name]] +Also notice that a real name is used in the `Signed-off-by` trailer. Please +don't hide your real name. + +[[commit-trailers]] +If you like, you can put extra tags at the end: + +. `Reported-by:` is used to credit someone who found the bug that + the patch attempts to fix. +. `Acked-by:` says that the person who is more familiar with the area + the patch attempts to modify liked the patch. +. `Reviewed-by:`, unlike the other tags, can only be offered by the + reviewers themselves when they are completely satisfied with the + patch after a detailed analysis. +. `Tested-by:` is used to indicate that the person applied the patch + and found it to have the desired effect. + +You can also create your own tag or use one that's in common usage +such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". + [[git-tools]] === Generate your patch using Git tools out of your commits. @@ -302,85 +380,6 @@ Do not forget to add trailers such as `Acked-by:`, `Reviewed-by:` and `Tested-by:` lines as necessary to credit people who helped your patch, and "cc:" them when sending such a final version for inclusion. -[[sign-off]] -=== Certify your work by adding your `Signed-off-by` trailer - -To improve tracking of who did what, we ask you to certify that you -wrote the patch or have the right to pass it on under the same license -as ours, by "signing off" your patch. Without sign-off, we cannot -accept your patches. - -If (and only if) you certify the below D-C-O: - -[[dco]] -.Developer's Certificate of Origin 1.1 -____ -By making a contribution to this project, I certify that: - -a. The contribution was created in whole or in part by me and I - have the right to submit it under the open source license - indicated in the file; or - -b. The contribution is based upon previous work that, to the best - of my knowledge, is covered under an appropriate open source - license and I have the right under that license to submit that - work with modifications, whether created in whole or in part - by me, under the same open source license (unless I am - permitted to submit under a different license), as indicated - in the file; or - -c. The contribution was provided directly to me by some other - person who certified (a), (b) or (c) and I have not modified - it. - -d. I understand and agree that this project and the contribution - are public and that a record of the contribution (including all - personal information I submit with it, including my sign-off) is - maintained indefinitely and may be redistributed consistent with - this project or the open source license(s) involved. -____ - -you add a "Signed-off-by" trailer to your commit, that looks like -this: - -.... - Signed-off-by: Random J Developer <random@developer.example.org> -.... - -This line can be added by Git if you run the git-commit command with -the -s option. - -Notice that you can place your own `Signed-off-by` trailer when -forwarding somebody else's patch with the above rules for -D-C-O. Indeed you are encouraged to do so. Do not forget to -place an in-body "From: " line at the beginning to properly attribute -the change to its true author (see (2) above). - -This procedure originally came from the Linux kernel project, so our -rule is quite similar to theirs, but what exactly it means to sign-off -your patch differs from project to project, so it may be different -from that of the project you are accustomed to. - -[[real-name]] -Also notice that a real name is used in the `Signed-off-by` trailer. Please -don't hide your real name. - -[[commit-trailers]] -If you like, you can put extra tags at the end: - -. `Reported-by:` is used to credit someone who found the bug that - the patch attempts to fix. -. `Acked-by:` says that the person who is more familiar with the area - the patch attempts to modify liked the patch. -. `Reviewed-by:`, unlike the other tags, can only be offered by the - reviewers themselves when they are completely satisfied with the - patch after a detailed analysis. -. `Tested-by:` is used to indicate that the person applied the patch - and found it to have the desired effect. - -You can also create your own tag or use one that's in common usage -such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". - == Subsystems with dedicated maintainers Some parts of the system have dedicated maintainers with their own @@ -449,13 +448,12 @@ their trees themselves. entitled "What's cooking in git.git" and "What's in git.git" giving the status of various proposed changes. -[[travis]] -== GitHub-Travis CI hints +== GitHub CI[[GHCI]]] -With an account at GitHub (you can get one for free to work on open -source projects), you can use Travis CI to test your changes on Linux, -Mac (and hopefully soon Windows). You can find a successful example -test build here: https://travis-ci.org/git/git/builds/120473209 +With an account at GitHub, you can use GitHub CI to test your changes +on Linux, Mac and Windows. See +https://github.com/git/git/actions/workflows/main.yml for examples of +recent CI runs. Follow these steps for the initial setup: @@ -463,31 +461,18 @@ Follow these steps for the initial setup: You can find detailed instructions how to fork here: https://help.github.com/articles/fork-a-repo/ -. Open the Travis CI website: https://travis-ci.org - -. Press the "Sign in with GitHub" button. - -. Grant Travis CI permissions to access your GitHub account. - You can find more information about the required permissions here: - https://docs.travis-ci.com/user/github-oauth-scopes - -. Open your Travis CI profile page: https://travis-ci.org/profile - -. Enable Travis CI builds for your Git fork. - -After the initial setup, Travis CI will run whenever you push new changes +After the initial setup, CI will run whenever you push new changes to your fork of Git on GitHub. You can monitor the test state of all your -branches here: https://travis-ci.org/__<Your GitHub handle>__/git/branches +branches here: https://github.com/<Your GitHub handle>/git/actions/workflows/main.yml If a branch did not pass all test cases then it is marked with a red -cross. In that case you can click on the failing Travis CI job and -scroll all the way down in the log. Find the line "<-- Click here to see -detailed test output!" and click on the triangle next to the log line -number to expand the detailed test output. Here is such a failing -example: https://travis-ci.org/git/git/jobs/122676187 - -Fix the problem and push your fix to your Git fork. This will trigger -a new Travis CI build to ensure all tests pass. +cross. In that case you can click on the failing job and navigate to +"ci/run-build-and-tests.sh" and/or "ci/print-test-failures.sh". You +can also download "Artifacts" which are tarred (or zipped) archives +with test data relevant for debugging. + +Then fix the problem and push your fix to your GitHub fork. This will +trigger a new CI build to ensure all tests pass. [[mua]] == MUA specific hints diff --git a/Documentation/config.txt b/Documentation/config.txt index bf82766a6a..0c0e6b859f 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -298,6 +298,15 @@ pathname:: tilde expansion happens to such a string: `~/` is expanded to the value of `$HOME`, and `~user/` to the specified user's home directory. ++ +If a path starts with `%(prefix)/`, the remainder is interpreted as a +path relative to Git's "runtime prefix", i.e. relative to the location +where Git itself was installed. For example, `%(prefix)/bin/` refers to +the directory in which the Git executable itself lives. If Git was +compiled without runtime prefix support, the compiled-in prefix will be +subsituted instead. In the unlikely event that a literal path needs to +be specified that should _not_ be expanded, it needs to be prefixed by +`./`, like so: `./%(prefix)/bin`. Variables diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 8b2849ff7b..063eec2511 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -44,6 +44,9 @@ advice.*:: Shown when linkgit:git-push[1] rejects a forced update of a branch when its remote-tracking ref has updates that we do not have locally. + skippedCherryPicks:: + Shown when linkgit:git-rebase[1] skips a commit that has already + been cherry-picked onto the upstream branch. statusAheadBehind:: Shown when linkgit:git-status[1] computes the ahead/behind counts for a local ref compared to its remote tracking ref, diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index 2d3331f55c..32f84838ac 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -118,9 +118,10 @@ diff.orderFile:: relative to the top of the working tree. diff.renameLimit:: - The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option `-l`. This setting - has no effect if rename detection is turned off. + The number of files to consider in the exhaustive portion of + copy/rename detection; equivalent to the 'git diff' option + `-l`. If not set, the default value is currently 1000. This + setting has no effect if rename detection is turned off. diff.renames:: Whether and how Git detects renames. If set to "false", diff --git a/Documentation/config/gui.txt b/Documentation/config/gui.txt index d30831a130..0c087fd8c9 100644 --- a/Documentation/config/gui.txt +++ b/Documentation/config/gui.txt @@ -11,7 +11,7 @@ gui.displayUntracked:: in the file list. The default is "true". gui.encoding:: - Specifies the default encoding to use for displaying of + Specifies the default character encoding to use for displaying of file contents in linkgit:git-gui[1] and linkgit:gitk[1]. It can be overridden by setting the 'encoding' attribute for relevant files (see linkgit:gitattributes[5]). diff --git a/Documentation/config/help.txt b/Documentation/config/help.txt index 783a90a0f9..610701f9a3 100644 --- a/Documentation/config/help.txt +++ b/Documentation/config/help.txt @@ -9,13 +9,15 @@ help.format:: help.autoCorrect:: If git detects typos and can identify exactly one valid command similar - to the error, git will automatically run the intended command after - waiting a duration of time defined by this configuration value in - deciseconds (0.1 sec). If this value is 0, the suggested corrections - will be shown, but not executed. If it is a negative integer, or - "immediate", the suggested command - is run immediately. If "never", suggestions are not shown at all. The - default value is zero. + to the error, git will try to suggest the correct command or even + run the suggestion automatically. Possible config values are: + - 0 (default): show the suggested command. + - positive number: run the suggested command after specified +deciseconds (0.1 sec). + - "immediate": run the suggested command immediately. + - "prompt": show the suggestion and prompt for confirmation to run +the command. + - "never": don't run or show any suggested command. help.htmlPath:: Specify the path where the HTML documentation resides. File system paths diff --git a/Documentation/config/merge.txt b/Documentation/config/merge.txt index 6b66c83eab..e27cc63944 100644 --- a/Documentation/config/merge.txt +++ b/Documentation/config/merge.txt @@ -33,10 +33,12 @@ merge.verifySignatures:: include::fmt-merge-msg.txt[] merge.renameLimit:: - The number of files to consider when performing rename detection - during a merge; if not specified, defaults to the value of - diff.renameLimit. This setting has no effect if rename detection - is turned off. + The number of files to consider in the exhaustive portion of + rename detection during a merge. If not specified, defaults + to the value of diff.renameLimit. If neither + merge.renameLimit nor diff.renameLimit are specified, + currently defaults to 7000. This setting has no effect if + rename detection is turned off. merge.renames:: Whether Git detects renames. If set to "false", rename detection diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt index d7a63c8c12..ee454f8126 100644 --- a/Documentation/config/submodule.txt +++ b/Documentation/config/submodule.txt @@ -58,8 +58,9 @@ submodule.active:: commands. See linkgit:gitsubmodules[7] for details. submodule.recurse:: - Specifies if commands recurse into submodules by default. This - applies to all commands that have a `--recurse-submodules` option + A boolean indicating if commands should enable the `--recurse-submodules` + option by default. + Applies to all commands that support this option (`checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, `reset`, `restore` and `switch`) except `clone` and `ls-files`. Defaults to false. diff --git a/Documentation/config/transfer.txt b/Documentation/config/transfer.txt index 505126a780..b49429eb4d 100644 --- a/Documentation/config/transfer.txt +++ b/Documentation/config/transfer.txt @@ -52,13 +52,17 @@ If you have multiple hideRefs values, later entries override earlier ones (and entries in more-specific config files override less-specific ones). + If a namespace is in use, the namespace prefix is stripped from each -reference before it is matched against `transfer.hiderefs` patterns. +reference before it is matched against `transfer.hiderefs` patterns. In +order to match refs before stripping, add a `^` in front of the ref name. If +you combine `!` and `^`, `!` must be specified first. ++ For example, if `refs/heads/master` is specified in `transfer.hideRefs` and the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` -is omitted from the advertisements but `refs/heads/master` and -`refs/namespaces/bar/refs/heads/master` are still advertised as so-called -"have" lines. In order to match refs before stripping, add a `^` in front of -the ref name. If you combine `!` and `^`, `!` must be specified first. +is omitted from the advertisements. If `uploadpack.allowRefInWant` is set, +`upload-pack` will treat `want-ref refs/heads/master` in a protocol v2 +`fetch` command as if `refs/namespaces/foo/refs/heads/master` did not exist. +`receive-pack`, on the other hand, will still advertise the object id the +ref is pointing to without mentioning its name (a so-called ".have" line). + Even if you hide refs, a client may still be able to steal the target objects via the techniques described in the "SECURITY" section of the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 32e6dee5ac..c89d530d3d 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -49,9 +49,10 @@ ifdef::git-log[] --diff-merges=m::: -m::: This option makes diff output for merge commits to be shown in - the default format. The default format could be changed using + the default format. `-m` will produce the output only if `-p` + is given as well. The default format could be changed using `log.diffMerges` configuration parameter, which default value - is `separate`. `-m` implies `-p`. + is `separate`. + --diff-merges=first-parent::: --diff-merges=1::: @@ -61,8 +62,7 @@ ifdef::git-log[] --diff-merges=separate::: This makes merge commits show the full diff with respect to each of the parents. Separate log entry and diff is generated - for each parent. This is the format that `-m` produced - historically. + for each parent. + --diff-merges=combined::: --diff-merges=c::: @@ -588,11 +588,17 @@ When used together with `-B`, omit also the preimage in the deletion part of a delete/create pair. -l<num>:: - The `-M` and `-C` options require O(n^2) processing time where n - is the number of potential rename/copy targets. This - option prevents rename/copy detection from running if - the number of rename/copy targets exceeds the specified - number. + The `-M` and `-C` options involve some preliminary steps that + can detect subsets of renames/copies cheaply, followed by an + exhaustive fallback portion that compares all remaining + unpaired destinations to all relevant sources. (For renames, + only remaining unpaired sources are relevant; for copies, all + original sources are relevant.) For N sources and + destinations, this exhaustive check is O(N^2). This option + prevents the exhaustive portion of rename/copy detection from + running if the number of source/destination files involved + exceeds the specified number. Defaults to diff.renameLimit. + Note that a value of 0 is treated as unlimited. ifndef::git-format-patch[] --diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 94dc9a54f2..5449767121 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -118,7 +118,8 @@ OPTIONS Reset <branchname> to <startpoint>, even if <branchname> exists already. Without `-f`, 'git branch' refuses to change an existing branch. In combination with `-d` (or `--delete`), allow deleting the - branch irrespective of its merged status. In combination with + branch irrespective of its merged status, or whether it even + points to a valid commit. In combination with `-m` (or `--move`), allow renaming the branch even if the new branch name already exists, the same applies for `-c` (or `--copy`). diff --git a/Documentation/git-bugreport.txt b/Documentation/git-bugreport.txt index 66e88c2e31..d8817bf3ce 100644 --- a/Documentation/git-bugreport.txt +++ b/Documentation/git-bugreport.txt @@ -40,8 +40,8 @@ OPTIONS ------- -o <path>:: --output-directory <path>:: - Place the resulting bug report file in `<path>` instead of the root of - the Git repository. + Place the resulting bug report file in `<path>` instead of the current + directory. -s <format>:: --suffix <format>:: diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 53804cad4b..ac0d003835 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -18,21 +18,48 @@ SYNOPSIS DESCRIPTION ----------- -Some workflows require that one or more branches of development on one -machine be replicated on another machine, but the two machines cannot -be directly connected, and therefore the interactive Git protocols (git, -ssh, http) cannot be used. - -The 'git bundle' command packages objects and references in an archive -at the originating machine, which can then be imported into another -repository using 'git fetch', 'git pull', or 'git clone', -after moving the archive by some means (e.g., by sneakernet). - -As no -direct connection between the repositories exists, the user must specify a -basis for the bundle that is held by the destination repository: the -bundle assumes that all objects in the basis are already in the -destination repository. +Create, unpack, and manipulate "bundle" files. Bundles are used for +the "offline" transfer of Git objects without an active "server" +sitting on the other side of the network connection. + +They can be used to create both incremental and full backups of a +repository, and to relay the state of the references in one repository +to another. + +Git commands that fetch or otherwise "read" via protocols such as +`ssh://` and `https://` can also operate on bundle files. It is +possible linkgit:git-clone[1] a new repository from a bundle, to use +linkgit:git-fetch[1] to fetch from one, and to list the references +contained within it with linkgit:git-ls-remote[1]. There's no +corresponding "write" support, i.e.a 'git push' into a bundle is not +supported. + +See the "EXAMPLES" section below for examples of how to use bundles. + +BUNDLE FORMAT +------------- + +Bundles are `.pack` files (see linkgit:git-pack-objects[1]) with a +header indicating what references are contained within the bundle. + +Like the the packed archive format itself bundles can either be +self-contained, or be created using exclusions. +See the "OBJECT PREREQUISITES" section below. + +Bundles created using revision exclusions are "thin packs" created +using the `--thin` option to linkgit:git-pack-objects[1], and +unbundled using the `--fix-thin` option to linkgit:git-index-pack[1]. + +There is no option to create a "thick pack" when using revision +exclusions, users should not be concerned about the difference. By +using "thin packs" bundles created using exclusions are smaller in +size. That they're "thin" under the hood is merely noted here as a +curiosity, and as a reference to other documentation + +See link:technical/bundle-format.html[the `bundle-format` +documentation] for more details and the discussion of "thin pack" in +link:technical/pack-format.html[the pack format documentation] for +further details. OPTIONS ------- @@ -117,28 +144,88 @@ unbundle <file>:: SPECIFYING REFERENCES --------------------- -'git bundle' will only package references that are shown by -'git show-ref': this includes heads, tags, and remote heads. References -such as `master~1` cannot be packaged, but are perfectly suitable for -defining the basis. More than one reference may be packaged, and more -than one basis can be specified. The objects packaged are those not -contained in the union of the given bases. Each basis can be -specified explicitly (e.g. `^master~10`), or implicitly (e.g. -`master~10..master`, `--since=10.days.ago master`). +Revisions must accompanied by reference names to be packaged in a +bundle. + +More than one reference may be packaged, and more than one set of prerequisite objects can +be specified. The objects packaged are those not contained in the +union of the prerequisites. + +The 'git bundle create' command resolves the reference names for you +using the same rules as `git rev-parse --abbrev-ref=loose`. Each +prerequisite can be specified explicitly (e.g. `^master~10`), or implicitly +(e.g. `master~10..master`, `--since=10.days.ago master`). + +All of these simple cases are OK (assuming we have a "master" and +"next" branch): + +---------------- +$ git bundle create master.bundle master +$ echo master | git bundle create master.bundle --stdin +$ git bundle create master-and-next.bundle master next +$ (echo master; echo next) | git bundle create master-and-next.bundle --stdin +---------------- + +And so are these (and the same but omitted `--stdin` examples): + +---------------- +$ git bundle create recent-master.bundle master~10..master +$ git bundle create recent-updates.bundle master~10..master next~5..next +---------------- + +A revision name or a range whose right-hand-side cannot be resolved to +a reference is not accepted: + +---------------- +$ git bundle create HEAD.bundle $(git rev-parse HEAD) +fatal: Refusing to create empty bundle. +$ git bundle create master-yesterday.bundle master~10..master~5 +fatal: Refusing to create empty bundle. +---------------- + +OBJECT PREREQUISITES +-------------------- + +When creating bundles it is possible to create a self-contained bundle +that can be unbundled in a repository with no common history, as well +as providing negative revisions to exclude objects needed in the +earlier parts of the history. + +Feeding a revision such as `new` to `git bundle create` will create a +bundle file that contains all the objects reachable from the revision +`new`. That bundle can be unbundled in any repository to obtain a full +history that leads to the revision `new`: + +---------------- +$ git bundle create full.bundle new +---------------- + +A revision range such as `old..new` will produce a bundle file that +will require the revision `old` (and any objects reachable from it) +to exist for the bundle to be "unbundle"-able: + +---------------- +$ git bundle create full.bundle old..new +---------------- + +A self-contained bundle without any prerequisites can be extracted +into anywhere, even into an empty repository, or be cloned from +(i.e., `new`, but not `old..new`). -It is very important that the basis used be held by the destination. It is okay to err on the side of caution, causing the bundle file to contain objects already in the destination, as these are ignored when unpacking at the destination. -`git clone` can use any bundle created without negative refspecs -(e.g., `new`, but not `old..new`). If you want to match `git clone --mirror`, which would include your refs such as `refs/remotes/*`, use `--all`. If you want to provide the same set of refs that a clone directly from the source repository would get, use `--branches --tags` for the `<git-rev-list-args>`. +The 'git bundle verify' command can be used to check whether your +recipient repository has the required prerequisite commits for a +bundle. + EXAMPLES -------- @@ -149,7 +236,7 @@ but we can move data from A to B via some mechanism (CD, email, etc.). We want to update R2 with development made on the branch master in R1. To bootstrap the process, you can first create a bundle that does not have -any basis. You can use a tag to remember up to what commit you last +any prerequisites. You can use a tag to remember up to what commit you last processed, in order to make it easy to later update the other repository with an incremental bundle: @@ -200,7 +287,7 @@ machineB$ git pull If you know up to what commit the intended recipient repository should have the necessary objects, you can use that knowledge to specify the -basis, giving a cut-off point to limit the revisions and objects that go +prerequisites, giving a cut-off point to limit the revisions and objects that go in the resulting bundle. The previous example used the lastR2bundle tag for this purpose, but you can use any other options that you would give to the linkgit:git-log[1] command. Here are more examples: @@ -211,7 +298,7 @@ You can use a tag that is present in both: $ git bundle create mybundle v1.0.0..master ---------------- -You can use a basis based on time: +You can use a prerequisite based on time: ---------------- $ git bundle create mybundle --since=10.days master @@ -224,7 +311,7 @@ $ git bundle create mybundle -10 master ---------------- You can run `git-bundle verify` to see if you can extract from a bundle -that was created with a basis: +that was created with a prerequisite: ---------------- $ git bundle verify mybundle diff --git a/Documentation/git-column.txt b/Documentation/git-column.txt index f58e9c43e6..6cea9ab463 100644 --- a/Documentation/git-column.txt +++ b/Documentation/git-column.txt @@ -39,7 +39,7 @@ OPTIONS --indent=<string>:: String to be printed at the beginning of each line. ---nl=<N>:: +--nl=<string>:: String to be printed at the end of each line, including newline character. diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 5cddadafd2..2dc4bae6da 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -71,6 +71,7 @@ codes are: On success, the command returns the exit code 0. +[[OPTIONS]] OPTIONS ------- @@ -143,7 +144,13 @@ See also <<FILES>>. -f config-file:: --file config-file:: - Use the given config file instead of the one specified by GIT_CONFIG. + For writing options: write to the specified file rather than the + repository `.git/config`. ++ +For reading options: read only from the specified file rather than from all +available files. ++ +See also <<FILES>>. --blob blob:: Similar to `--file` but use the given blob instead of a file. E.g. @@ -325,21 +332,14 @@ All writing options will per default write to the repository specific configuration file. Note that this also affects options like `--replace-all` and `--unset`. *'git config' will only ever change one file at a time*. -You can override these rules either by command-line options or by environment -variables. The `--global`, `--system` and `--worktree` options will limit -the file used to the global, system-wide or per-worktree file respectively. -The `GIT_CONFIG` environment variable has a similar effect, but you -can specify any filename you want. +You can override these rules using the `--global`, `--system`, +`--local`, `--worktree`, and `--file` command-line options; see +<<OPTIONS>> above. ENVIRONMENT ----------- -GIT_CONFIG:: - Take the configuration from the given file instead of .git/config. - Using the "--global" option forces this to ~/.gitconfig. Using the - "--system" option forces this to $(prefix)/etc/gitconfig. - GIT_CONFIG_GLOBAL:: GIT_CONFIG_SYSTEM:: Take the configuration from the given files instead from global or @@ -367,6 +367,12 @@ This is useful for cases where you want to spawn multiple git commands with a common configuration but cannot depend on a configuration file, for example when writing scripts. +GIT_CONFIG:: + If no `--file` option is provided to `git config`, use the file + given by `GIT_CONFIG` as if it were provided via `--file`. This + variable has no effect on other Git commands, and is mostly for + historical compatibility; there is generally no reason to use it + instead of the `--file` option. [[EXAMPLES]] EXAMPLES diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 7f4c8a8ce7..6236c75c9b 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -51,16 +51,20 @@ files on disk. --staged is a synonym of --cached. + If --merge-base is given, instead of using <commit>, use the merge base -of <commit> and HEAD. `git diff --merge-base A` is equivalent to -`git diff $(git merge-base A HEAD)`. +of <commit> and HEAD. `git diff --cached --merge-base A` is equivalent to +`git diff --cached $(git merge-base A HEAD)`. -'git diff' [<options>] <commit> [--] [<path>...]:: +'git diff' [<options>] [--merge-base] <commit> [--] [<path>...]:: This form is to view the changes you have in your working tree relative to the named <commit>. You can use HEAD to compare it with the latest commit, or a branch name to compare with the tip of a different branch. ++ +If --merge-base is given, instead of using <commit>, use the merge base +of <commit> and HEAD. `git diff --merge-base A` is equivalent to +`git diff $(git merge-base A HEAD)`. 'git diff' [<options>] [--merge-base] <commit> <commit> [--] [<path>...]:: diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index 9067c2079e..550c16ca61 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -133,7 +133,7 @@ remember to run that, set `fetch.prune` globally, or linkgit:git-config[1]. Here's where things get tricky and more specific. The pruning feature -doesn't actually care about branches, instead it'll prune local <-> +doesn't actually care about branches, instead it'll prune local <--> remote-references as a function of the refspec of the remote (see `<refspec>` and <<CRTB,CONFIGURED REMOTE-TRACKING BRANCHES>> above). diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 2ae2478de7..6da899c629 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -235,6 +235,15 @@ and `date` to extract the named component. For email fields (`authoremail`, without angle brackets, and `:localpart` to get the part before the `@` symbol out of the trimmed email. +The raw data in an object is `raw`. + +raw:size:: + The raw data size of the object. + +Note that `--format=%(raw)` can not be used with `--python`, `--shell`, `--tcl`, +because such language may not support arbitrary binary data in their string +variable type. + The message in a commit or a tag object is `contents`, from which `contents:<part>` can be used to extract various parts out of: diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 3819fadac1..e4f3352eb5 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -61,6 +61,8 @@ merge has resulted in conflicts. OPTIONS ------- +:git-merge: 1 + include::merge-options.txt[] -m <msg>:: diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 5c3fb67c01..aef757ec89 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -15,14 +15,17 @@ SYNOPSIS DESCRIPTION ----------- -Incorporates changes from a remote repository into the current -branch. In its default mode, `git pull` is shorthand for -`git fetch` followed by `git merge FETCH_HEAD`. - -More precisely, 'git pull' runs 'git fetch' with the given -parameters and calls 'git merge' to merge the retrieved branch -heads into the current branch. -With `--rebase`, it runs 'git rebase' instead of 'git merge'. +Incorporates changes from a remote repository into the current branch. +If the current branch is behind the remote, then by default it will +fast-forward the current branch to match the remote. If the current +branch and the remote have diverged, the user needs to specify how to +reconcile the divergent branches with `--rebase` or `--no-rebase` (or +the corresponding configuration option in `pull.rebase`). + +More precisely, `git pull` runs `git fetch` with the given parameters +and then depending on configuration options or command line flags, +will call either `git rebase` or `git merge` to reconcile diverging +branches. <repository> should be the name of a remote repository as passed to linkgit:git-fetch[1]. <refspec> can name an @@ -117,7 +120,7 @@ When set to `preserve` (deprecated in favor of `merges`), rebase with the `--preserve-merges` option passed to `git rebase` so that locally created merge commits will not be flattened. + -When false, merge the current branch into the upstream branch. +When false, merge the upstream branch into the current branch. + When `interactive`, enable the interactive mode of rebase. + @@ -132,7 +135,7 @@ published that history already. Do *not* use this option unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: - Override earlier --rebase. + This is shorthand for --rebase=false. Options related to fetching ~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 55af6fd24e..506345cb0e 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -79,9 +79,10 @@ remain the checked-out branch. If the upstream branch already contains a change you have made (e.g., because you mailed a patch which was applied upstream), then that commit -will be skipped. For example, running `git rebase master` on the -following history (in which `A'` and `A` introduce the same set of changes, -but have different committer information): +will be skipped and warnings will be issued (if the `merge` backend is +used). For example, running `git rebase master` on the following +history (in which `A'` and `A` introduce the same set of changes, but +have different committer information): ------------ A---B---C topic @@ -312,7 +313,10 @@ See also INCOMPATIBLE OPTIONS below. By default (or if `--no-reapply-cherry-picks` is given), these commits will be automatically dropped. Because this necessitates reading all upstream commits, this can be expensive in repos with a large number -of upstream commits that need to be read. +of upstream commits that need to be read. When using the `merge` +backend, warnings will be issued for each dropped commit (unless +`--quiet` is given). Advice will also be issued unless +`advice.skippedCherryPicks` is set to false (see linkgit:git-config[1]). + `--reapply-cherry-picks` allows rebase to forgo reading all upstream commits, potentially improving performance. @@ -340,9 +344,7 @@ See also INCOMPATIBLE OPTIONS below. -m:: --merge:: - Use merging strategies to rebase. When the recursive (default) merge - strategy is used, this allows rebase to be aware of renames on the - upstream side. This is the default. + Using merging strategies to rebase (default). + Note that a rebase merge works by replaying each commit from the working branch on top of the <upstream> branch. Because of this, when a merge @@ -354,9 +356,8 @@ See also INCOMPATIBLE OPTIONS below. -s <strategy>:: --strategy=<strategy>:: - Use the given merge strategy. - If there is no `-s` option 'git merge-recursive' is used - instead. This implies --merge. + Use the given merge strategy, instead of the default `ort`. + This implies `--merge`. + Because 'git rebase' replays each commit from the working branch on top of the <upstream> branch using the given strategy, using @@ -369,7 +370,7 @@ See also INCOMPATIBLE OPTIONS below. --strategy-option=<strategy-option>:: Pass the <strategy-option> through to the merge strategy. This implies `--merge` and, if no strategy has been - specified, `-s recursive`. Note the reversal of 'ours' and + specified, `-s ort`. Note the reversal of 'ours' and 'theirs' as noted above for the `-m` option. + See also INCOMPATIBLE OPTIONS below. @@ -530,7 +531,7 @@ The `--rebase-merges` mode is similar in spirit to the deprecated where commits can be reordered, inserted and dropped at will. + It is currently only possible to recreate the merge commits using the -`recursive` merge strategy; Different merge strategies can be used only via +`ort` merge strategy; different merge strategies can be used only via explicit `exec git merge -s <strategy> [...]` commands. + See also REBASING MERGES and INCOMPATIBLE OPTIONS below. @@ -1219,12 +1220,16 @@ successful merge so that the user can edit the message. If a `merge` command fails for any reason other than merge conflicts (i.e. when the merge operation did not even start), it is rescheduled immediately. -At this time, the `merge` command will *always* use the `recursive` -merge strategy for regular merges, and `octopus` for octopus merges, -with no way to choose a different one. To work around -this, an `exec` command can be used to call `git merge` explicitly, -using the fact that the labels are worktree-local refs (the ref -`refs/rewritten/onto` would correspond to the label `onto`, for example). +By default, the `merge` command will use the `ort` merge strategy for +regular merges, and `octopus` for octopus merges. One can specify a +default strategy for all merges using the `--strategy` argument when +invoking rebase, or can override specific merges in the interactive +list of commands by using an `exec` command to call `git merge` +explicitly with a `--strategy` argument. Note that when calling `git +merge` explicitly like this, you can make use of the fact that the +labels are worktree-local refs (the ref `refs/rewritten/onto` would +correspond to the label `onto`, for example) in order to refer to the +branches you want to merge. Note: the first command (`label onto`) labels the revision onto which the commits are rebased; The name `onto` is just a convention, as a nod diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 66e67e6cbf..8a7cbdd19c 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -9,7 +9,7 @@ git-worktree - Manage multiple working trees SYNOPSIS -------- [verse] -'git worktree add' [-f] [--detach] [--checkout] [--lock] [-b <new-branch>] <path> [<commit-ish>] +'git worktree add' [-f] [--detach] [--checkout] [--lock [--reason <string>]] [-b <new-branch>] <path> [<commit-ish>] 'git worktree list' [--porcelain] 'git worktree lock' [--reason <string>] <worktree> 'git worktree move' <worktree> <new-path> @@ -242,7 +242,7 @@ With `list`, annotate missing working trees as prunable if they are older than `<time>`. --reason <string>:: - With `lock`, an explanation why the working tree is locked. + With `lock` or with `add --lock`, an explanation why the working tree is locked. <worktree>:: Working trees can be identified by path, either relative or diff --git a/Documentation/gitfaq.txt b/Documentation/gitfaq.txt index afdaeab850..8c1f2d5675 100644 --- a/Documentation/gitfaq.txt +++ b/Documentation/gitfaq.txt @@ -275,7 +275,7 @@ best to always use a regular merge commit. [[merge-two-revert-one]] If I make a change on two branches but revert it on one, why does the merge of those branches include the change?:: - By default, when Git does a merge, it uses a strategy called the recursive + By default, when Git does a merge, it uses a strategy called the `ort` strategy, which does a fancy three-way merge. In such a case, when Git performs the merge, it considers exactly three points: the two heads and a third point, called the _merge base_, which is usually the common ancestor of diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index 59ef5cef1f..0e0b863105 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -322,7 +322,7 @@ initiating this "pull". If Bob's work conflicts with what Alice did since their histories forked, Alice will use her working tree and the index to resolve conflicts, and existing local changes will interfere with the conflict resolution process (Git will still perform the fetch but will -refuse to merge --- Alice will have to get rid of her local changes in +refuse to merge -- Alice will have to get rid of her local changes in some way and pull again when this happens). Alice can peek at what Bob did without merging first, using the "fetch" diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index eb0aabd396..61ec157c2f 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -2,6 +2,9 @@ --no-commit:: Perform the merge and commit the result. This option can be used to override --no-commit. +ifdef::git-pull[] + Only useful when merging. +endif::git-pull[] + With --no-commit perform the merge and stop just before creating a merge commit, to give the user a chance to inspect and further @@ -39,6 +42,7 @@ set to `no` at the beginning of them. to `MERGE_MSG` before being passed on to the commit machinery in the case of a merge conflict. +ifdef::git-merge[] --ff:: --no-ff:: --ff-only:: @@ -47,6 +51,22 @@ set to `no` at the beginning of them. default unless merging an annotated (and possibly signed) tag that is not stored in its natural place in the `refs/tags/` hierarchy, in which case `--no-ff` is assumed. +endif::git-merge[] +ifdef::git-pull[] +--ff-only:: + Only update to the new history if there is no divergent local + history. This is the default when no method for reconciling + divergent histories is provided (via the --rebase=* flags). + +--ff:: +--no-ff:: + When merging rather than rebasing, specifies how a merge is + handled when the merged-in history is already a descendant of + the current history. If merging is requested, `--ff` is the + default unless merging an annotated (and possibly signed) tag + that is not stored in its natural place in the `refs/tags/` + hierarchy, in which case `--no-ff` is assumed. +endif::git-pull[] + With `--ff`, when possible resolve the merge as a fast-forward (only update the branch pointer to match the merged branch; do not create a @@ -55,9 +75,11 @@ descendant of the current history), create a merge commit. + With `--no-ff`, create a merge commit in all cases, even when the merge could instead be resolved as a fast-forward. +ifdef::git-merge[] + With `--ff-only`, resolve the merge as a fast-forward when possible. When not possible, refuse to merge and exit with a non-zero status. +endif::git-merge[] -S[<keyid>]:: --gpg-sign[=<keyid>]:: @@ -73,6 +95,9 @@ When not possible, refuse to merge and exit with a non-zero status. In addition to branch names, populate the log message with one-line descriptions from at most <n> actual commits that are being merged. See also linkgit:git-fmt-merge-msg[1]. +ifdef::git-pull[] + Only useful when merging. +endif::git-pull[] + With --no-log do not list one-line descriptions from the actual commits being merged. @@ -102,18 +127,25 @@ With --no-squash perform the merge and commit the result. This option can be used to override --squash. + With --squash, --commit is not allowed, and will fail. +ifdef::git-pull[] ++ +Only useful when merging. +endif::git-pull[] --no-verify:: This option bypasses the pre-merge and commit-msg hooks. See also linkgit:githooks[5]. +ifdef::git-pull[] + Only useful when merging. +endif::git-pull[] -s <strategy>:: --strategy=<strategy>:: Use the given merge strategy; can be supplied more than once to specify them in the order they should be tried. If there is no `-s` option, a built-in list of strategies - is used instead ('git merge-recursive' when merging a single - head, 'git merge-octopus' otherwise). + is used instead (`ort` when merging a single head, + `octopus` otherwise). -X <option>:: --strategy-option=<option>:: @@ -127,6 +159,10 @@ With --squash, --commit is not allowed, and will fail. default trust model, this means the signing key has been signed by a trusted key. If the tip commit of the side branch is not signed with a valid key, the merge is aborted. +ifdef::git-pull[] ++ +Only useful when merging. +endif::git-pull[] --summary:: --no-summary:: @@ -154,7 +190,8 @@ endif::git-pull[] --autostash:: --no-autostash:: Automatically create a temporary stash entry before the operation - begins, and apply it after the operation ends. This means + begins, record it in the special ref `MERGE_AUTOSTASH` + and apply it after the operation ends. This means that you can run the operation on a dirty worktree. However, use with care: the final stash application after a successful merge might result in non-trivial conflicts. @@ -166,3 +203,7 @@ endif::git-pull[] projects that started their lives independently. As that is a very rare occasion, no configuration variable to enable this by default exists and will not be added. +ifdef::git-pull[] ++ +Only useful when merging. +endif::git-pull[] diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 2912de706b..5fc54ec060 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -6,28 +6,23 @@ backend 'merge strategies' to be chosen with `-s` option. Some strategies can also take their own options, which can be passed by giving `-X<option>` arguments to `git merge` and/or `git pull`. -resolve:: - This can only resolve two heads (i.e. the current branch - and another branch you pulled from) using a 3-way merge - algorithm. It tries to carefully detect criss-cross - merge ambiguities and is considered generally safe and - fast. - -recursive:: - This can only resolve two heads using a 3-way merge - algorithm. When there is more than one common - ancestor that can be used for 3-way merge, it creates a - merged tree of the common ancestors and uses that as - the reference tree for the 3-way merge. This has been - reported to result in fewer merge conflicts without - causing mismerges by tests done on actual merge commits - taken from Linux 2.6 kernel development history. - Additionally this can detect and handle merges involving - renames, but currently cannot make use of detected - copies. This is the default merge strategy when pulling - or merging one branch. +ort:: + This is the default merge strategy when pulling or merging one + branch. This strategy can only resolve two heads using a + 3-way merge algorithm. When there is more than one common + ancestor that can be used for 3-way merge, it creates a merged + tree of the common ancestors and uses that as the reference + tree for the 3-way merge. This has been reported to result in + fewer merge conflicts without causing mismerges by tests done + on actual merge commits taken from Linux 2.6 kernel + development history. Additionally this strategy can detect + and handle merges involving renames. It does not make use of + detected copies. The name for this algorithm is an acronym + ("Ostensibly Recursive's Twin") and came from the fact that it + was written as a replacement for the previous default + algorithm, `recursive`. + -The 'recursive' strategy can take the following options: +The 'ort' strategy can take the following options: ours;; This option forces conflicting hunks to be auto-resolved cleanly by @@ -43,19 +38,6 @@ theirs;; This is the opposite of 'ours'; note that, unlike 'ours', there is no 'theirs' merge strategy to confuse this merge option with. -patience;; - With this option, 'merge-recursive' spends a little extra time - to avoid mismerges that sometimes occur due to unimportant - matching lines (e.g., braces from distinct functions). Use - this when the branches to be merged have diverged wildly. - See also linkgit:git-diff[1] `--patience`. - -diff-algorithm=[patience|minimal|histogram|myers];; - Tells 'merge-recursive' to use a different diff algorithm, which - can help avoid mismerges that occur due to unimportant matching - lines (such as braces from distinct functions). See also - linkgit:git-diff[1] `--diff-algorithm`. - ignore-space-change;; ignore-all-space;; ignore-space-at-eol;; @@ -84,11 +66,6 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. -no-renames;; - Turn off rename detection. This overrides the `merge.renames` - configuration variable. - See also linkgit:git-diff[1] `--no-renames`. - find-renames[=<n>];; Turn on rename detection, optionally setting the similarity threshold. This is the default. This overrides the @@ -105,6 +82,46 @@ subtree[=<path>];; is prefixed (or stripped from the beginning) to make the shape of two trees to match. +recursive:: + This can only resolve two heads using a 3-way merge + algorithm. When there is more than one common + ancestor that can be used for 3-way merge, it creates a + merged tree of the common ancestors and uses that as + the reference tree for the 3-way merge. This has been + reported to result in fewer merge conflicts without + causing mismerges by tests done on actual merge commits + taken from Linux 2.6 kernel development history. + Additionally this can detect and handle merges involving + renames. It does not make use of detected copies. This was + the default strategy for resolving two heads from Git v0.99.9k + until v2.33.0. ++ +The 'recursive' strategy takes the same options as 'ort'. However, +there are three additional options that 'ort' ignores (not documented +above) that are potentially useful with the 'recursive' strategy: + +patience;; + Deprecated synonym for `diff-algorithm=patience`. + +diff-algorithm=[patience|minimal|histogram|myers];; + Use a different diff algorithm while merging, which can help + avoid mismerges that occur due to unimportant matching lines + (such as braces from distinct functions). See also + linkgit:git-diff[1] `--diff-algorithm`. Note that `ort` + specifically uses `diff-algorithm=histogram`, while `recursive` + defaults to the `diff.algorithm` config setting. + +no-renames;; + Turn off rename detection. This overrides the `merge.renames` + configuration variable. + See also linkgit:git-diff[1] `--no-renames`. + +resolve:: + This can only resolve two heads (i.e. the current branch + and another branch you pulled from) using a 3-way merge + algorithm. It tries to carefully detect criss-cross + merge ambiguities. It does not handle renames. + octopus:: This resolves cases with more than two heads, but refuses to do a complex merge that needs manual resolution. It is @@ -121,13 +138,13 @@ ours:: the 'recursive' merge strategy. subtree:: - This is a modified recursive strategy. When merging trees A and + This is a modified `ort` strategy. When merging trees A and B, if B corresponds to a subtree of A, B is first adjusted to match the tree structure of A, instead of reading the trees at the same level. This adjustment is also done to the common ancestor tree. -With the strategies that use 3-way merge (including the default, 'recursive'), +With the strategies that use 3-way merge (including the default, 'ort'), if a change is made on both branches, but later reverted on one of the branches, that change will be present in the merged result; some people find this behavior confusing. It occurs because only the heads and the merge base diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 27ddaf84a1..b3af850608 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -33,14 +33,16 @@ people using 80-column terminals. used together. --encoding=<encoding>:: - The commit objects record the encoding used for the log message + Commit objects record the character encoding used for the log message in their encoding header; this option can be used to tell the command to re-code the commit log message in the encoding preferred by the user. For non plumbing commands this defaults to UTF-8. Note that if an object claims to be encoded in `X` and we are outputting in `X`, we will output the object verbatim; this means that invalid sequences in the original - commit may be copied to the output. + commit may be copied to the output. Likewise, if iconv(3) fails + to convert the commit, we will output the original object + verbatim, along with a warning. --expand-tabs=<n>:: --expand-tabs:: diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 24569b06d1..b7bd27e171 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -968,6 +968,11 @@ list of the missing objects. Object IDs are prefixed with a ``?'' character. objects. endif::git-rev-list[] +--unsorted-input:: + Show commits in the order they were given on the command line instead + of sorting them in reverse chronological order by commit time. Cannot + be combined with `--no-walk` or `--no-walk=sorted`. + --no-walk[=(sorted|unsorted)]:: Only show the given commits, but do not traverse their ancestors. This has no effect if a range is specified. If the argument @@ -975,7 +980,8 @@ endif::git-rev-list[] given on the command line. Otherwise (if `sorted` or no argument was given), the commits are shown in reverse chronological order by commit time. - Cannot be combined with `--graph`. + Cannot be combined with `--graph`. Cannot be combined with + `--unsorted-input` if `sorted` or no argument was given. --do-walk:: Overrides a previous `--no-walk`. diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt index 037a91cbca..b9f3198fbe 100644 --- a/Documentation/technical/api-trace2.txt +++ b/Documentation/technical/api-trace2.txt @@ -493,6 +493,20 @@ about specific error arguments. } ------------ +`"cmd_ancestry"`:: + This event contains the text command name for the parent (and earlier + generations of parents) of the current process, in an array ordered from + nearest parent to furthest great-grandparent. It may not be implemented + on all platforms. ++ +------------ +{ + "event":"cmd_ancestry", + ... + "ancestry":["bash","tmux: server","systemd"] +} +------------ + `"cmd_name"`:: This event contains the command name for this git process and the hierarchy of commands from parent git processes. diff --git a/Documentation/technical/directory-rename-detection.txt b/Documentation/technical/directory-rename-detection.txt index 49b83ef3cc..029ee2cedc 100644 --- a/Documentation/technical/directory-rename-detection.txt +++ b/Documentation/technical/directory-rename-detection.txt @@ -2,9 +2,9 @@ Directory rename detection ========================== Rename detection logic in diffcore-rename that checks for renames of -individual files is aggregated and analyzed in merge-recursive for cases -where combinations of renames indicate that a full directory has been -renamed. +individual files is also aggregated there and then analyzed in either +merge-ort or merge-recursive for cases where combinations of renames +indicate that a full directory has been renamed. Scope of abilities ------------------ @@ -88,9 +88,11 @@ directory rename detection support in: Folks have requested in the past that `git diff` detect directory renames and somehow simplify its output. It is not clear whether this would be desirable or how the output should be simplified, so this was - simply not implemented. Further, to implement this, directory rename - detection logic would need to move from merge-recursive to - diffcore-rename. + simply not implemented. Also, while diffcore-rename has most of the + logic for detecting directory renames, some of the logic is still found + within merge-ort and merge-recursive. Fully supporting directory + rename detection in diffs would require copying or moving the remaining + bits of logic to the diff machinery. * am diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 96240598e3..865074bed4 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -3190,7 +3190,7 @@ that *updated* thing--the old state that you added originally ends up not being pointed to by any commit or tree, so it's now a dangling blob object. -Similarly, when the "recursive" merge strategy runs, and finds that +Similarly, when the "ort" merge strategy runs, and finds that there are criss-cross merges and thus more than one merge base (which is fairly unusual, but it does happen), it will generate one temporary midway tree (or possibly even more, if you had lots of criss-crossing |