diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/SubmittingPatches | 11 | ||||
| -rw-r--r-- | Documentation/config.txt | 18 | ||||
| -rw-r--r-- | Documentation/diff-options.txt | 6 | ||||
| -rw-r--r-- | Documentation/git-checkout.txt | 21 | ||||
| -rw-r--r-- | Documentation/git-clean.txt | 8 | ||||
| -rw-r--r-- | Documentation/git-fast-import.txt | 8 | ||||
| -rw-r--r-- | Documentation/git-instaweb.txt | 3 | ||||
| -rw-r--r-- | Documentation/git-ls-files.txt | 6 | ||||
| -rw-r--r-- | Documentation/git-rebase.txt | 7 | ||||
| -rw-r--r-- | Documentation/git-status.txt | 6 | ||||
| -rw-r--r-- | Documentation/git-svn.txt | 6 | ||||
| -rw-r--r-- | Documentation/gitmodules.txt | 15 |
12 files changed, 102 insertions, 13 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index eb53e0636e..ece3c77482 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -7,17 +7,16 @@ Checklist (and a short version for the impatient): before committing - do not check in commented out code or unneeded files - the first line of the commit message should be a short - description and should skip the full stop + description (50 characters is the soft limit, see DISCUSSION + in git-commit(1)), and should skip the full stop - the body should provide a meaningful commit message, which: - uses the imperative, present tense: "change", not "changed" or "changes". - includes motivation for the change, and contrasts its implementation with previous behaviour - - if you want your work included in git.git, add a - "Signed-off-by: Your Name <you@example.com>" line to the - commit message (or just use the option "-s" when - committing) to confirm that you agree to the Developer's - Certificate of Origin + - add a "Signed-off-by: Your Name <you@example.com>" line to the + commit message (or just use the option "-s" when committing) + to confirm that you agree to the Developer's Certificate of Origin - make sure that you have tests for the bug you are fixing - make sure that the test suite passes after your commit diff --git a/Documentation/config.txt b/Documentation/config.txt index 7fffee7e3d..5e86a28f92 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -826,6 +826,11 @@ diff.renames:: will enable basic rename detection. If set to "copies" or "copy", it will detect copies, as well. +diff.ignoreSubmodules:: + Sets the default value of --ignore-submodules. Note that this + affects only 'git diff' Porcelain, and not lower level 'diff' + commands such as 'git diff-files'. + diff.suppressBlankEmpty:: A boolean to inhibit the standard behavior of printing a space before each empty output line. Defaults to false. @@ -1749,6 +1754,19 @@ submodule.<name>.update:: URL and other values found in the `.gitmodules` file. See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. +submodule.<name>.ignore:: + Defines under what circumstances "git status" and the diff family show + a submodule as modified. When set to "all", it will never be considered + modified, "dirty" will ignore all changes to the submodules work tree and + takes only differences between the HEAD of the submodule and the commit + recorded in the superproject into account. "untracked" will additionally + let submodules with modified tracked files in their work tree show up. + Using "none" (the default when this option is not set) also shows + submodules that have untracked files in their work tree as changed. + This setting overrides any setting made in .gitmodules for this submodule, + both settings can be overriden on the command line by using the + "--ignore-submodules" option. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index eecedaab6e..4656a97e60 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -355,7 +355,11 @@ endif::git-format-patch[] --ignore-submodules[=<when>]:: Ignore changes to submodules in the diff generation. <when> can be - either "untracked", "dirty" or "all", which is the default. When + either "none", "untracked", "dirty" or "all", which is the default + Using "none" will consider the submodule modified when it either contains + untracked or modified files or its HEAD differs from the commit recorded + in the superproject and can be used to override any settings of the + 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When "untracked" is used submodules are not considered dirty when they only contain untracked content (but they are still scanned for modified content). Using "dirty" ignores all changes to the work tree of submodules, diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 1bacd2e104..66e570113a 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] -'git checkout' [-q] [-f] [-m] [[-b|--orphan] <new_branch>] [<start_point>] +'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... 'git checkout' --patch [<tree-ish>] [--] [<paths>...] @@ -21,7 +21,7 @@ also update `HEAD` to set the specified branch as the current branch. 'git checkout' [<branch>]:: -'git checkout' -b <new branch> [<start point>]:: +'git checkout' -b|-B <new_branch> [<start point>]:: This form switches branches by updating the index, working tree, and HEAD to reflect the specified branch. @@ -31,6 +31,17 @@ were called and then checked out; in this case you can use the `--track` or `--no-track` options, which will be passed to 'git branch'. As a convenience, `--track` without `-b` implies branch creation; see the description of `--track` below. ++ +If `-B` is given, <new_branch> is created if it doesn't exist; otherwise, it +is reset. This is the transactional equivalent of ++ +------------ +$ git branch -f <branch> [<start point>] +$ git checkout <branch> +------------ ++ +that is to say, the branch is not reset/created unless "git checkout" is +successful. 'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: @@ -75,6 +86,12 @@ entries; instead, unmerged entries are ignored. Create a new branch named <new_branch> and start it at <start_point>; see linkgit:git-branch[1] for details. +-B:: + Creates the branch <new_branch> and start it at <start_point>; + if it already exists, then reset it to <start_point>. This is + equivalent to running "git branch" with "-f"; see + linkgit:git-branch[1] for details. + -t:: --track:: When creating a new branch, set up "upstream" configuration. See diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index a81cb6c280..60e38e6e27 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -8,7 +8,7 @@ git-clean - Remove untracked files from the working tree SYNOPSIS -------- [verse] -'git clean' [-d] [-f] [-n] [-q] [-x | -X] [--] <path>... +'git clean' [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <path>... DESCRIPTION ----------- @@ -45,6 +45,12 @@ OPTIONS Be quiet, only report errors, but not the files that are successfully removed. +-e <pattern>:: +--exclude=<pattern>:: + Specify special exceptions to not be cleaned. Each <pattern> is + the same form as in $GIT_DIR/info/excludes and this option can be + given multiple times. + -x:: Don't use the ignore rules. This allows removing all untracked files, including build products. This can be used (possibly in diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 77a0a2481a..966ba4f213 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -482,9 +482,11 @@ External data format:: 'M' SP <mode> SP <dataref> SP <path> LF .... + -Here `<dataref>` can be either a mark reference (`:<idnum>`) +Here usually `<dataref>` must be either a mark reference (`:<idnum>`) set by a prior `blob` command, or a full 40-byte SHA-1 of an -existing Git blob object. +existing Git blob object. If `<mode>` is `040000`` then +`<dataref>` must be the full 40-byte SHA-1 of an existing +Git tree object or a mark reference set with `--import-marks`. Inline data format:: The data content for the file has not been supplied yet. @@ -509,6 +511,8 @@ in octal. Git only supports the following modes: * `160000`: A gitlink, SHA-1 of the object refers to a commit in another repository. Git links can only be specified by SHA or through a commit mark. They are used to implement submodules. +* `040000`: A subdirectory. Subdirectories can only be specified by + SHA or through a tree mark set with `--import-marks`. In both formats `<path>` is the complete path of the file to be added (if not already existing) or modified (if already existing). diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 2c3c4d2994..e70cea9320 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -49,15 +49,18 @@ OPTIONS linkgit:git-web--browse[1] for more information about this. If the script fails, the URL will be printed to stdout. +start:: --start:: Start the httpd instance and exit. This does not generate any of the configuration files for spawning a new instance. +stop:: --stop:: Stop the httpd instance and exit. This does not generate any of the configuration files for spawning a new instance, nor does it close the browser. +restart:: --restart:: Restart the httpd instance and exit. This does not generate any of the configuration files for spawning a new instance. diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index bd919f2dfd..a7c8174d01 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -140,6 +140,12 @@ a space) at the start of each line: lines, show only a partial prefix. Non default number of digits can be specified with --abbrev=<n>. +--debug:: + After each line that describes a file, add more data about its + cache entry. This is intended to show as much information as + possible for manual inspection; the exact format may change at + any time. + \--:: Do not interpret any more arguments as options. diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index be23ad2359..b4314568f5 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -250,6 +250,13 @@ on top of the <upstream> branch using the given strategy, using the 'ours' strategy simply discards all patches from the <branch>, which makes little sense. +-X <strategy-option>:: +--strategy-option=<strategy-option>:: + Pass the <strategy-option> through to the merge strategy. + This implies `\--merge` and, if no strategy has been + specified, `-s recursive`. Note the reversal of 'ours' and + 'theirs' as noted in above for the `-m` option. + -q:: --quiet:: Be quiet. Implies --no-stat. diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 2fd054c104..dae190a5f2 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -55,7 +55,11 @@ specified. --ignore-submodules[=<when>]:: Ignore changes to submodules when looking for changes. <when> can be - either "untracked", "dirty" or "all", which is the default. When + either "none", "untracked", "dirty" or "all", which is the default. + Using "none" will consider the submodule modified when it either contains + untracked or modified files or its HEAD differs from the commit recorded + in the superproject and can be used to override any settings of the + 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When "untracked" is used submodules are not considered dirty when they only contain untracked content (but they are still scanned for modified content). Using "dirty" ignores all changes to the work tree of submodules, diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index b09bd9761f..4b84d08fc8 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -646,6 +646,12 @@ svn.brokenSymlinkWorkaround:: revision fetched. If unset, 'git svn' assumes this option to be "true". +svn.pathnameencoding:: + This instructs git svn to recode pathnames to a given encoding. + It can be used by windows users and by those who work in non-utf8 + locales to avoid corrupted file names with non-ASCII characters. + Valid encodings are the ones supported by Perl's Encode module. + Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps options all affect the metadata generated and used by 'git svn'; they *must* be set in the configuration file before any history is imported diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 72a13d18e0..8ae107da25 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -44,6 +44,21 @@ submodule.<name>.update:: This config option is overridden if 'git submodule update' is given the '--merge' or '--rebase' options. +submodule.<name>.ignore:: + Defines under what circumstances "git status" and the diff family show + a submodule as modified. When set to "all", it will never be considered + modified, "dirty" will ignore all changes to the submodules work tree and + takes only differences between the HEAD of the submodule and the commit + recorded in the superproject into account. "untracked" will additionally + let submodules with modified tracked files in their work tree show up. + Using "none" (the default when this option is not set) also shows + submodules that have untracked files in their work tree as changed. + If this option is also present in the submodules entry in .git/config of + the superproject, the setting there will override the one found in + .gitmodules. + Both settings can be overriden on the command line by using the + "--ignore-submodule" option. + EXAMPLES -------- |