diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/RelNotes/2.7.0.txt | 367 | ||||
| -rw-r--r-- | Documentation/blame-options.txt | 5 | ||||
| -rw-r--r-- | Documentation/config.txt | 26 | ||||
| -rw-r--r-- | Documentation/git-bisect.txt | 103 | ||||
| -rw-r--r-- | Documentation/git-branch.txt | 16 | ||||
| -rw-r--r-- | Documentation/git-checkout.txt | 6 | ||||
| -rw-r--r-- | Documentation/git-clone.txt | 9 | ||||
| -rw-r--r-- | Documentation/git-for-each-ref.txt | 38 | ||||
| -rw-r--r-- | Documentation/git-p4.txt | 39 | ||||
| -rw-r--r-- | Documentation/git-quiltimport.txt | 11 | ||||
| -rw-r--r-- | Documentation/git-remote.txt | 10 | ||||
| -rw-r--r-- | Documentation/git-rev-list.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-send-email.txt | 11 | ||||
| -rw-r--r-- | Documentation/git-stash.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-tag.txt | 27 | ||||
| -rw-r--r-- | Documentation/git-worktree.txt | 49 | ||||
| -rw-r--r-- | Documentation/gitignore.txt | 23 | ||||
| -rw-r--r-- | Documentation/glossary-content.txt | 5 | ||||
| -rw-r--r-- | Documentation/rev-list-options.txt | 23 |
19 files changed, 732 insertions, 40 deletions
diff --git a/Documentation/RelNotes/2.7.0.txt b/Documentation/RelNotes/2.7.0.txt new file mode 100644 index 0000000000..29b4cfe0bf --- /dev/null +++ b/Documentation/RelNotes/2.7.0.txt @@ -0,0 +1,367 @@ +Git 2.7 Release Notes +===================== + +Updates since v2.6 +------------------ + +UI, Workflows & Features + + * "git remote" learned "get-url" subcommand to show the URL for a + given remote name used for fetching and pushing. + + * There was no way to defeat a configured rebase.autostash variable + from the command line, as "git rebase --no-autostash" was missing. + + * "git log --date=local" used to only show the normal (default) + format in the local timezone. The command learned to take 'local' + as an instruction to use the local timezone with other formats, + + * The refs used during a "git bisect" session is now per-worktree so + that independent bisect sessions can be done in different worktrees + created with "git worktree add". + + * Users who are too busy to type three extra keystrokes to ask for + "git stash show -p" can now set stash.showPatch configuration + varible to true to always see the actual patch, not just the list + of paths affected with feel for the extent of damage via diffstat. + + * "quiltimport" allows to specify the series file by honoring the + $QUILT_SERIES environment and also --series command line option. + + * The use of 'good/bad' in "git bisect" made it confusing to use when + hunting for a state change that is not a regression (e.g. bugfix). + The command learned 'old/new' and then allows the end user to + say e.g. "bisect start --term-old=fast --term-new=slow" to find a + performance regression. + + * "git interpret-trailers" can now run outside of a Git repository. + + * "git p4" learned to reencode the pathname it uses to communicate + with the p4 depot with a new option. + + * Give progress meter to "git filter-branch". + + * Allow a later "!/abc/def" to override an earlier "/abc" that + appears in the same .gitignore file to make it easier to express + "everything in /abc directory is ignored, except for ...". + + * Teach "git p4" to send large blobs outside the repository by + talking to Git LFS. + + * Prepare for Git on-disk repository representation to undergo + backward incompatible changes by introducing a new repository + format version "1", with an extension mechanism. + + * "git worktree" learned a "list" subcommand. + + * "git clone --dissociate" learned that it can be used even when + "--reference" was not used at the same time. + + * "git blame" learnt to take "--first-parent" and "--reverse" at the + same time when it makes sense. + + * "git checkout" did not follow the usual "--[no-]progress" + convention and implemented only "--quiet" that is essentially + a superset of "--no-progress". Extend the command to support the + usual "--[no-]progress". + + * The semantics of tranfer.hideRefs configuration variable have been + extended to work better with the ref "namespace" feature that lets + you throw unrelated bunches of repositories in a single physical + repository and virtually serve them as separate ones. + + * send-email config variables whose values are pathnames now go + through the ~username/ expansion. + + * bash completion learnt to TAB-complete recipient addresses given + to send-email. + + * The credential-cache daemon can be told to ignore SIGHUP to work + around issue when running Git from inside emacs. + + +Performance, Internal Implementation, Development Support etc. + + * The infrastructure to rewrite "git submodule" in C is being built + incrementally. Let's polish these early parts well enough and make + them graduate to 'next' and 'master', so that the more involved + follow-up can start cooking on a solid ground. + + * Some features from "git tag -l" and "git branch -l" have been made + available to "git for-each-ref" so that eventually the unified + implementation can be shared across all three. The version merged + to the 'master' branch earlier had a performance regression in "tag + --contains", which has since been corrected. + + * Because "test_when_finished" in our test framework queues the + clean-up tasks to be done in a shell variable, it should not be + used inside a subshell. Add a mechanism to allow 'bash' to catch + such uses, and fix the ones that were found. + + * The debugging infrastructure for pkt-line based communication has + been improved to mark the side-band communication specifically. + (merge fd89433 jk/async-pkt-line later to maint). + + * Update "git branch" that list existing branches, using the + ref-filter API that is shared with "git tag" and "git + for-each-ref". + + * The test for various line-ending conversions has been enhanced. + + * A few test scripts around "git p4" have been improved for + portability. + + * Many allocations that is manually counted (correctly) that are + followed by strcpy/sprintf have been replaced with a less error + prone constructs such as xstrfmt. + + * The internal stripspace() function has been moved to where it + logically belongs to, i.e. strbuf API, and the command line parser + of "git stripspace" has been updated to use the parse_options API. + + * "git am" used to spawn "git mailinfo" via run_command() API once + per each patch, but learned to make a direct call to mailinfo() + instead. + + * The implementation of "git mailinfo" was refactored so that a + mailinfo() function can be directly called from inside a process. + + * With a "debug" helper, debugging of a single "git" invocation in + our test scripts has become a lot easier. + + * The "configure" script did not test for -lpthread correctly, which + upset some linkers. + + * Cross completed task off of subtree project's todo list. + + * Test cleanups for the subtree project. + + * Clean up style in an ancient test t9300. + + * Work around some test flakiness with p4d. + + * Fsck did not correctly detect a NUL-truncated header in a tag. + + * Use a safer behavior when we hit errors verifying remote certificates. + + * Speed up filter-branch for cases where we only care about rewriting + commits, not tree data. + + * The parse-options API has been updated to make "-h" command line + option work more consistently in all commands. + + * "git svn rebase/mkdirs" got optimized by keeping track of empty + directories better. + + * Fix some racy client/server tests by treating SIGPIPE the same as a + normal non-zero exit. + + * The necessary infrastructure to build topics using the free Travis + CI has been added. Developers forking from this topic (and enabling + Travis) can do their own builds, and we can turn on auto-builds for + git/git (including build-status for pull requests that people + open). + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.6 +---------------- + +Unless otherwise noted, all the fixes since v2.6 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * Very small number of options take a parameter that is optional + (which is not a great UI element as they can only appear at the end + of the command line). Add notice to documentation of each and + every one of them. + + * "git blame --first-parent v1.0..v2.0" was not rejected but did not + limit the blame to commits on the first parent chain. + + * "git subtree" (in contrib/) now can take whitespaces in the + pathnames, not only in the in-tree pathname but the name of the + directory that the repository is in. + + * The ssh transport, just like any other transport over the network, + did not clear GIT_* environment variables, but it is possible to + use SendEnv and AcceptEnv to leak them to the remote invocation of + Git, which is not a good idea at all. Explicitly clear them just + like we do for the local transport. + + * Correct "git p4 --detect-labels" so that it does not fail to create + a tag that points at a commit that is also being imported. + + * The Makefile always runs the library archiver with hardcoded "crs" + options, which was inconvenient for exotic platforms on which + people want to use programs with totally different set of command + line options. + + * Customization to change the behaviour with "make -w" and "make -s" + in our Makefile was broken when they were used together. + + * Allocation related functions and stdio are unsafe things to call + inside a signal handler, and indeed killing the pager can cause + glibc to deadlock waiting on allocation mutex as our signal handler + tries to free() some data structures in wait_for_pager(). Reduce + these unsafe calls. + + * The way how --ref/--notes to specify the notes tree reference are + DWIMmed was not clearly documented. + + * "git gc" used to barf when a symbolic ref has gone dangling + (e.g. the branch that used to be your upstream's default when you + cloned from it is now gone, and you did "fetch --prune"). + + * "git clone --dissociate" runs a big "git repack" process at the + end, and it helps to close file descriptors that are open on the + packs and their idx files before doing so on filesystems that + cannot remove a file that is still open. + + * Description of the "log.follow" configuration variable in "git log" + documentation is now also copied to "git config" documentation. + + * "git rebase -i" had a minor regression recently, which stopped + considering a line that begins with an indented '#' in its insn + sheet not a comment. Further, the code was still too picky on + Windows where CRLF left by the editor is turned into a trailing CR + on the line read via the "read" built-in command of bash. Both of + these issues are now fixed. + + * After "git checkout --detach", "git status" reported a fairly + useless "HEAD detached at HEAD", instead of saying at which exact + commit. + + * When "git send-email" wanted to talk over Net::SMTP::SSL, + Net::Cmd::datasend() did not like to be fed too many bytes at the + same time and failed to send messages. Send the payload one line + at a time to work around the problem. + + * When "git am" was rewritten as a built-in, it stopped paying + attention to user.signingkey, which was fixed. + + * It was not possible to use a repository-lookalike created by "git + worktree add" as a local source of "git clone". + + * On a case insensitive filesystems, setting GIT_WORK_TREE variable + using a random cases that does not agree with what the filesystem + thinks confused Git that it wasn't inside the working tree. + + * Performance-measurement tests did not work without an installed Git. + + * A test script for the HTTP service had a timing dependent bug, + which was fixed. + + * There were some classes of errors that "git fsck" diagnosed to its + standard error that did not cause it to exit with non-zero status. + + * Work around "git p4" failing when the P4 depot records the contents + in UTF-16 without UTF-16 BOM. + + * When "git gc --auto" is backgrounded, its diagnosis message is + lost. Save it to a file in $GIT_DIR and show it next time the "gc + --auto" is run. + + * The submodule code has been taught to work better with separate + work trees created via "git worktree add". + + * "git gc" is safe to run anytime only because it has the built-in + grace period to protect young objects. In order to run with no + grace period, the user must make sure that the repository is + quiescent. + + * A recent "filter-branch --msg-filter" broke skipping of the commit + object header, which is fixed. + + * The normalize_ceiling_entry() function does not muck with the end + of the path it accepts, and the real world callers do rely on that, + but a test insisted that the function drops a trailing slash. + + * A test for interaction between untracked cache and sparse checkout + added in Git 2.5 days were flaky. + + * A couple of commands still showed "[options]" in their usage string + to note where options should come on their command line, but we + spell that "[<options>]" in most places these days. + + * The synopsis text and the usage string of subcommands that read + list of things from the standard input are often shown as if they + only take input from a file on a filesystem, which was misleading. + + * "git am -3" had a small regression where it is aborted in its error + handling codepath when underlying merge-recursive failed in certain + ways, as it assumed that the internal call to merge-recursive will + never die, which is not the case (yet). + + * The linkage order of libraries was wrong in places around libcurl. + + * The name-hash subsystem that is used to cope with case insensitive + filesystems keeps track of directories and their on-filesystem + cases for all the paths in the index by holding a pointer to a + randomly chosen cache entry that is inside the directory (for its + ce->ce_name component). This pointer was not updated even when the + cache entry was removed from the index, leading to use after free. + This was fixed by recording the path for each directory instead of + borrowing cache entries and restructuring the API somewhat. + + * "git merge-file" tried to signal how many conflicts it found, which + obviously would not work well when there are too many of them. + + * The error message from "git blame --contents --reverse" incorrectly + talked about "--contents --children". + + * "git imap-send" did not compile well with older version of cURL library. + + * Merging a branch that removes a path and another that changes the + mode bits on the same path should have conflicted at the path, but + it didn't and silently favoured the removal. + + * "git --literal-pathspecs add -u/-A" without any command line + argument misbehaved ever since Git 2.0. + + * "git daemon" uses "run_command()" without "finish_command()", so it + needs to release resources itself, which it forgot to do. + + * "git status --branch --short" accessed beyond the constant string + "HEAD", which has been corrected. + + * We peek objects from submodule's object store by linking it to the + list of alternate object databases, but the code to do so forgot to + correctly initialize the list. + + * The code to prepare the working tree side of temporary directory + for the "dir-diff" feature forgot that symbolic links need not be + copied (or symlinked) to the temporary area, as the code already + special cases and overwrites them. Besides, it was wrong to try + computing the object name of the target of symbolic link, which may + not even exist or may be a directory. + + * A Range: request can be responded with a full response and when + asked properly libcurl knows how to strip the result down to the + requested range. However, we were hand-crafting a range request + and it did not kick in. + + * Having a leftover .idx file without corresponding .pack file in + the repository hurts performance; "git gc" learned to prune them. + + * Apple's common crypto implementation of SHA1_Update() does not take + more than 4GB at a time, and we now have a compile-time workaround + for it. + + * Produce correct "dirty" marker for shell prompts, even when we + are on an orphan or an unborn branch. + + * A build without NO_IPv6 used to use gethostbyname() when guessing + user's hostname, instead of getaddrinfo() that is used in other + codepaths in such a build. + (merge 00bce77 ep/ident-with-getaddrinfo later to maint). + + * The exit code of git-fsck didnot reflect some types of errors found + in packed objects, which has been corrected. + (merge 8c24d83 dt/fsck-verify-pack-error later to maint). + + * Code clean-up, minor fixes etc. + (merge 15ed07d jc/rerere later to maint). + (merge 147875f sb/submodule-config-parse later to maint). diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index a09969ba08..760eab7428 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -63,11 +63,10 @@ include::line-range-format.txt[] `-` to make the command read from the standard input). --date <format>:: - The value is one of the following alternatives: - {relative,local,default,iso,rfc,short}. If --date is not + Specifies the format used to output dates. If --date is not provided, the value of the blame.date config variable is used. If the blame.date config variable is also not set, the - iso format is used. For more information, See the discussion + iso format is used. For supported values, see the discussion of the --date option at linkgit:git-log[1]. -M|<num>|:: diff --git a/Documentation/config.txt b/Documentation/config.txt index fec0dea5d0..2d06b11f25 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -1122,6 +1122,9 @@ credential.<url>.*:: example.com. See linkgit:gitcredentials[7] for details on how URLs are matched. +credentialCache.ignoreSIGHUP:: + Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting. + include::diff-config.txt[] difftool.<tool>.path:: @@ -1829,9 +1832,7 @@ log.abbrevCommit:: log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `--date` option. Possible values are `relative`, `local`, - `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] - for details. + `--date` option. See linkgit:git-log[1] for details. log.decorate:: Print out the ref names of any commits that are shown by the log @@ -2593,6 +2594,16 @@ status.submoduleSummary:: submodule summary' command, which shows a similar output but does not honor these settings. +stash.showPatch:: + If this is set to true, the `git stash show` command without an + option will show the stash in patch form. Defaults to false. + See description of 'show' command in linkgit:git-stash[1]. + +stash.showStat:: + If this is set to true, the `git stash show` command without an + option will show diffstat of the stash. Defaults to true. + See description of 'show' command in linkgit:git-stash[1]. + submodule.<name>.path:: submodule.<name>.url:: The path within this project and URL for a submodule. These @@ -2665,6 +2676,15 @@ You may also include a `!` in front of the ref name to negate the entry, explicitly exposing it, even if an earlier entry marked it as hidden. If you have multiple hideRefs values, later entries override earlier ones (and entries in more-specific config files override less-specific ones). ++ +If a namespace is in use, the namespace prefix is stripped from each +reference before it is matched against `transfer.hiderefs` patterns. +For example, if `refs/heads/master` is specified in `transfer.hideRefs` and +the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` +is omitted from the advertisements but `refs/heads/master` and +`refs/namespaces/bar/refs/heads/master` are still advertised as so-called +"have" lines. In order to match refs before stripping, add a `^` in front of +the ref name. If you combine `!` and `^`, `!` must be specified first. transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 1b7a97b1db..7e79aaedeb 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -16,9 +16,11 @@ DESCRIPTION The command takes various subcommands, and different options depending on the subcommand: - git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] - git bisect bad [<rev>] - git bisect good [<rev>...] + git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>] + [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] + git bisect (bad|new) [<rev>] + git bisect (good|old) [<rev>...] + git bisect terms [--term-good | --term-bad] git bisect skip [(<rev>|<range>)...] git bisect reset [<commit>] git bisect visualize @@ -36,6 +38,13 @@ whether the selected commit is "good" or "bad". It continues narrowing down the range until it finds the exact commit that introduced the change. +In fact, `git bisect` can be used to find the commit that changed +*any* property of your project; e.g., the commit that fixed a bug, or +the commit that caused a benchmark's performance to improve. To +support this more general usage, the terms "old" and "new" can be used +in place of "good" and "bad", or you can choose your own terms. See +section "Alternate terms" below for more information. + Basic bisect commands: start, bad, good ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -111,6 +120,79 @@ bad revision, while `git bisect reset HEAD` will leave you on the current bisection commit and avoid switching commits at all. +Alternate terms +~~~~~~~~~~~~~~~ + +Sometimes you are not looking for the commit that introduced a +breakage, but rather for a commit that caused a change between some +other "old" state and "new" state. For example, you might be looking +for the commit that introduced a particular fix. Or you might be +looking for the first commit in which the source-code filenames were +finally all converted to your company's naming standard. Or whatever. + +In such cases it can be very confusing to use the terms "good" and +"bad" to refer to "the state before the change" and "the state after +the change". So instead, you can use the terms "old" and "new", +respectively, in place of "good" and "bad". (But note that you cannot +mix "good" and "bad" with "old" and "new" in a single session.) + +In this more general usage, you provide `git bisect` with a "new" +commit has some property and an "old" commit that doesn't have that +property. Each time `git bisect` checks out a commit, you test if that +commit has the property. If it does, mark the commit as "new"; +otherwise, mark it as "old". When the bisection is done, `git bisect` +will report which commit introduced the property. + +To use "old" and "new" instead of "good" and bad, you must run `git +bisect start` without commits as argument and then run the following +commands to add the commits: + +------------------------------------------------ +git bisect old [<rev>] +------------------------------------------------ + +to indicate that a commit was before the sought change, or + +------------------------------------------------ +git bisect new [<rev>...] +------------------------------------------------ + +to indicate that it was after. + +To get a reminder of the currently used terms, use + +------------------------------------------------ +git bisect terms +------------------------------------------------ + +You can get just the old (respectively new) term with `git bisect term +--term-old` or `git bisect term --term-good`. + +If you would like to use your own terms instead of "bad"/"good" or +"new"/"old", you can choose any names you like (except existing bisect +subcommands like `reset`, `start`, ...) by starting the +bisection using + +------------------------------------------------ +git bisect start --term-old <term-old> --term-new <term-new> +------------------------------------------------ + +For example, if you are looking for a commit that introduced a +performance regression, you might use + +------------------------------------------------ +git bisect start --term-old fast --term-new slow +------------------------------------------------ + +Or if you are looking for the commit that fixed a bug, you might use + +------------------------------------------------ +git bisect start --term-new fixed --term-old broken +------------------------------------------------ + +Then, use `git bisect <term-old>` and `git bisect <term-new>` instead +of `git bisect good` and `git bisect bad` to mark commits. + Bisect visualize ~~~~~~~~~~~~~~~~ @@ -387,6 +469,21 @@ In this case, when 'git bisect run' finishes, bisect/bad will refer to a commit has at least one parent whose reachable graph is fully traversable in the sense required by 'git pack objects'. +* Look for a fix instead of a regression in the code ++ +------------ +$ git bisect start +$ git bisect new HEAD # current commit is marked as new +$ git bisect old HEAD~10 # the tenth commit from now is marked as old +------------ ++ +or: +------------ +$ git bisect start --term-old broken --term-new fixed +$ git bisect fixed +$ git bisect broken HEAD~10 +------------ + Getting help ~~~~~~~~~~~~ diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index bbbade4f51..4a7037f1c8 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -11,7 +11,8 @@ SYNOPSIS 'git branch' [--color[=<when>] | --no-color] [-r | -a] [--list] [-v [--abbrev=<length> | --no-abbrev]] [--column[=<options>] | --no-column] - [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] + [(--merged | --no-merged | --contains) [<commit>]] [--sort=<key>] + [--points-at <object>] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] 'git branch' --unset-upstream [<branchname>] @@ -231,6 +232,19 @@ start-point is either a local or remote-tracking branch. The new name for an existing branch. The same restrictions as for <branchname> apply. +--sort=<key>:: + Sort based on the key given. Prefix `-` to sort in descending + order of the value. You may use the --sort=<key> option + multiple times, in which case the last key becomes the primary + key. The keys supported are the same as those in `git + for-each-ref`. Sort order defaults to sorting based on the + full refname (including `refs/...` prefix). This lists + detached HEAD (if present) first, then local branches and + finally remote-tracking branches. + + +--points-at <object>:: + Only list branches of the given object. Examples -------- diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index e269fb1108..5e5273e073 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -107,6 +107,12 @@ OPTIONS --quiet:: Quiet, suppress feedback messages. +--[no-]progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless `--quiet` + is specified. This flag enables progress reporting even if not + attached to a terminal, regardless of `--quiet`. + -f:: --force:: When switching branches, proceed even if the index or the diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index f1f2a3f7ea..6bf000dac3 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -104,8 +104,13 @@ objects from the source repository into a pack in the cloned repository. --dissociate:: Borrow the objects from reference repositories specified with the `--reference` options only to reduce network - transfer and stop borrowing from them after a clone is made - by making necessary local copies of borrowed objects. + transfer, and stop borrowing from them after a clone is made + by making necessary local copies of borrowed objects. This + option can also be used when cloning locally from a + repository that already borrows objects from another + repository--the new repository will borrow objects from the + same repository, and this option can be used to stop the + borrowing. --quiet:: -q:: diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 7f8d9a5b5f..c6f073cea4 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -10,6 +10,8 @@ SYNOPSIS [verse] 'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] [(--sort=<key>)...] [--format=<format>] [<pattern>...] + [--points-at <object>] [(--merged | --no-merged) [<object>]] + [--contains [<object>]] DESCRIPTION ----------- @@ -62,6 +64,20 @@ OPTIONS the specified host language. This is meant to produce a scriptlet that can directly be `eval`ed. +--points-at <object>:: + Only list refs which points at the given object. + +--merged [<object>]:: + Only list refs whose tips are reachable from the + specified commit (HEAD if not specified). + +--no-merged [<object>]:: + Only list refs whose tips are not reachable from the + specified commit (HEAD if not specified). + +--contains [<object>]:: + Only list tags which contain the specified commit (HEAD if not + specified). FIELD NAMES ----------- @@ -111,6 +127,17 @@ color:: Change output color. Followed by `:<colorname>`, where names are described in `color.branch.*`. +align:: + Left-, middle-, or right-align the content between + %(align:...) and %(end). The "align:" is followed by `<width>` + and `<position>` in any order separated by a comma, where the + `<position>` is either left, right or middle, default being + left and `<width>` is the total length of the content with + alignment. If the contents length is more than the width then + no alignment is performed. If used with '--quote' everything + in between %(align:...) and %(end) is quoted, but if nested + then only the topmost level performs quoting. + In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can be used to specify the value in the header field. @@ -123,20 +150,23 @@ The complete message in a commit and tag object is `contents`. Its first line is `contents:subject`, where subject is the concatenation of all lines of the commit message up to the first blank line. The next line is 'contents:body', where body is all of the lines after the first -blank line. Finally, the optional GPG signature is `contents:signature`. +blank line. The optional GPG signature is `contents:signature`. The +first `N` lines of the message is obtained using `contents:lines=N`. For sorting purposes, fields with numeric values sort in numeric order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). All other fields are used to sort in their byte-value order. +There is also an option to sort by versions, this can be done by using +the fieldname `version:refname` or its alias `v:refname`. + In any case, a field name that refers to a field inapplicable to the object referred by the ref does not cause an error. It returns an empty string instead. As a special case for the date-type fields, you may specify a format for -the date by adding one of `:default`, `:relative`, `:short`, `:local`, -`:iso8601`, `:rfc2822` or `:raw` to the end of the fieldname; e.g. -`%(taggerdate:relative)`. +the date by adding `:` followed by date format name (see the +values the `--date` option to linkgit::git-rev-list[1] takes). EXAMPLES diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index b3e768ee81..738cfde10c 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -510,6 +510,45 @@ git-p4.useClientSpec:: option '--use-client-spec'. See the "CLIENT SPEC" section above. This variable is a boolean, not the name of a p4 client. +git-p4.pathEncoding:: + Perforce keeps the encoding of a path as given by the originating OS. + Git expects paths encoded as UTF-8. Use this config to tell git-p4 + what encoding Perforce had used for the paths. This encoding is used + to transcode the paths to UTF-8. As an example, Perforce on Windows + often uses “cp1252” to encode path names. + +git-p4.largeFileSystem:: + Specify the system that is used for large (binary) files. Please note + that large file systems do not support the 'git p4 submit' command. + Only Git LFS [1] is implemented right now. Download + and install the Git LFS command line extension to use this option + and configure it like this: ++ +------------- +git config git-p4.largeFileSystem GitLFS +------------- ++ + [1] https://git-lfs.github.com/ + +git-p4.largeFileExtensions:: + All files matching a file extension in the list will be processed + by the large file system. Do not prefix the extensions with '.'. + +git-p4.largeFileThreshold:: + All files with an uncompressed size exceeding the threshold will be + processed by the large file system. By default the threshold is + defined in bytes. Add the suffix k, m, or g to change the unit. + +git-p4.largeFileCompressedThreshold:: + All files with a compressed size exceeding the threshold will be + processed by the large file system. This option might slow down + your clone/sync process. By default the threshold is defined in + bytes. Add the suffix k, m, or g to change the unit. + +git-p4.largeFilePush:: + Boolean variable which defines if large files are automatically + pushed to a server. + git-p4.keepEmptyCommits:: A changelist that contains only excluded files will be imported as an empty commit if this boolean option is set to true. diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index d64388cb8e..ff633b0db7 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -10,6 +10,7 @@ SYNOPSIS -------- [verse] 'git quiltimport' [--dry-run | -n] [--author <author>] [--patches <dir>] + [--series <file>] DESCRIPTION @@ -42,13 +43,19 @@ OPTIONS information can be found in the patch description. --patches <dir>:: - The directory to find the quilt patches and the - quilt series file. + The directory to find the quilt patches. + The default for the patch directory is patches or the value of the $QUILT_PATCHES environment variable. +--series <file>:: + The quilt series file. ++ +The default for the series file is <patches>/series +or the value of the $QUILT_SERIES environment +variable. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 8bd22aff87..1d7eceaa93 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -15,6 +15,7 @@ SYNOPSIS 'git remote remove' <name> 'git remote set-head' <name> (-a | --auto | -d | --delete | <branch>) 'git remote set-branches' [--add] <name> <branch>... +'git remote get-url' [--push] [--all] <name> 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> 'git remote set-url --delete' [--push] <name> <url> @@ -131,6 +132,15 @@ The named branches will be interpreted as if specified with the With `--add`, instead of replacing the list of currently tracked branches, adds to that list. +'get-url':: + +Retrieves the URLs for a remote. Configurations for `insteadOf` and +`pushInsteadOf` are expanded here. By default, only the first URL is listed. ++ +With '--push', push URLs are queried rather than fetch URLs. ++ +With '--all', all URLs for the remote will be listed. + 'set-url':: Changes URLs for the remote. Sets first URL for remote <name> that matches diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 7b49c85347..ef22f1775b 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -45,7 +45,7 @@ SYNOPSIS [ --regexp-ignore-case | -i ] [ --extended-regexp | -E ] [ --fixed-strings | -F ] - [ --date=(local|relative|default|iso|iso-strict|rfc|short) ] + [ --date=<format>] [ [ --objects | --objects-edge | --objects-edge-aggressive ] [ --unpacked ] ] [ --pretty | --header ] diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index b9134d234f..771a7b5b09 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -10,6 +10,7 @@ SYNOPSIS -------- [verse] 'git send-email' [options] <file|directory|rev-list options>... +'git send-email' --dump-aliases DESCRIPTION @@ -387,6 +388,16 @@ default to '--validate'. Send emails even if safety checks would prevent it. +Information +~~~~~~~~~~~ + +--dump-aliases:: + Instead of the normal operation, dump the shorthand alias names from + the configured alias file(s), one per line in alphabetical order. Note, + this only includes the alias name and not its expanded email addresses. + See 'sendemail.aliasesfile' for more information about aliases. + + CONFIGURATION ------------- diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 375213fe46..92df596e5f 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -95,6 +95,8 @@ show [<stash>]:: shows the latest one. By default, the command shows the diffstat, but it will accept any format known to 'git diff' (e.g., `git stash show -p stash@{1}` to view the second most recent stash in patch form). + You can use stash.showStat and/or stash.showPatch config variables + to change the default behavior. pop [--index] [-q|--quiet] [<stash>]:: diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 08b4dfbf1b..7220e5eca1 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -13,7 +13,8 @@ SYNOPSIS <tagname> [<commit> | <object>] 'git tag' -d <tagname>... 'git tag' [-n[<num>]] -l [--contains <commit>] [--points-at <object>] - [--column[=<options>] | --no-column] [--create-reflog] [<pattern>...] + [--column[=<options>] | --no-column] [--create-reflog] [--sort=<key>] + [--format=<format>] [--[no-]merged [<commit>]] [<pattern>...] 'git tag' -v <tagname>... DESCRIPTION @@ -94,14 +95,16 @@ OPTIONS using fnmatch(3)). Multiple patterns may be given; if any of them matches, the tag is shown. ---sort=<type>:: - Sort in a specific order. Supported type is "refname" - (lexicographic order), "version:refname" or "v:refname" (tag +--sort=<key>:: + Sort based on the key given. Prefix `-` to sort in + descending order of the value. You may use the --sort=<key> option + multiple times, in which case the last key becomes the primary + key. Also supports "version:refname" or "v:refname" (tag names are treated as versions). The "version:refname" sort order can also be affected by the - "versionsort.prereleaseSuffix" configuration variable. Prepend - "-" to reverse sort order. When this option is not given, the - sort order defaults to the value configured for the 'tag.sort' + "versionsort.prereleaseSuffix" configuration variable. + The keys supported are the same as those in `git for-each-ref`. + Sort order defaults to the value configured for the 'tag.sort' variable if it exists, or lexicographic order otherwise. See linkgit:git-config[1]. @@ -156,6 +159,16 @@ This option is only applicable when listing tags without annotation lines. The object that the new tag will refer to, usually a commit. Defaults to HEAD. +<format>:: + A string that interpolates `%(fieldname)` from the object + pointed at by a ref being shown. The format is the same as + that of linkgit:git-for-each-ref[1]. When unspecified, + defaults to `%(refname:short)`. + +--[no-]merged [<commit>]:: + Only list tags whose tips are reachable, or not reachable + if '--no-merged' is used, from the specified commit ('HEAD' + if not specified). CONFIGURATION ------------- diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index fb68156cf8..5b9ad0429c 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -11,6 +11,7 @@ SYNOPSIS [verse] 'git worktree add' [-f] [--detach] [-b <new-branch>] <path> [<branch>] 'git worktree prune' [-n] [-v] [--expire <expire>] +'git worktree list' [--porcelain] DESCRIPTION ----------- @@ -59,6 +60,13 @@ prune:: Prune working tree information in $GIT_DIR/worktrees. +list:: + +List details of each worktree. The main worktree is listed first, followed by +each of the linked worktrees. The output details include if the worktree is +bare, the revision currently checked out, and the branch currently checked out +(or 'detached HEAD' if none). + OPTIONS ------- @@ -86,6 +94,11 @@ OPTIONS With `prune`, do not remove anything; just report what it would remove. +--porcelain:: + With `list`, output in an easy-to-parse format for scripts. + This format will remain stable across Git versions and regardless of user + configuration. See below for details. + -v:: --verbose:: With `prune`, report all removals. @@ -134,6 +147,41 @@ to `/path/main/.git/worktrees/test-next` then a file named `test-next` entry from being pruned. See linkgit:gitrepository-layout[5] for details. +LIST OUTPUT FORMAT +------------------ +The worktree list command has two output formats. The default format shows the +details on a single line with columns. For example: + +------------ +S git worktree list +/path/to/bare-source (bare) +/path/to/linked-worktree abcd1234 [master] +/path/to/other-linked-worktree 1234abc (detached HEAD) +------------ + +Porcelain Format +~~~~~~~~~~~~~~~~ +The porcelain format has a line per attribute. Attributes are listed with a +label and value separated by a single space. Boolean attributes (like 'bare' +and 'detached') are listed as a label only, and are only present if and only +if the value is true. An empty line indicates the end of a worktree. For +example: + +------------ +S git worktree list --porcelain +worktree /path/to/bare-source +bare + +worktree /path/to/linked-worktree +HEAD abcd1234abcd1234abcd1234abcd1234abcd1234 +branch refs/heads/master + +worktree /path/to/other-linked-worktree +HEAD 1234abc1234abc1234abc1234abc1234abc1234a +detached + +------------ + EXAMPLES -------- You are in the middle of a refactoring session and your boss comes in and @@ -167,7 +215,6 @@ performed manually, such as: - `remove` to remove a linked working tree and its administrative files (and warn if the working tree is dirty) - `mv` to move or rename a working tree and update its administrative files -- `list` to list linked working trees - `lock` to prevent automatic pruning of administrative files (for instance, for a working tree on a portable device) diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 473623d631..79a1948a0b 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -82,12 +82,12 @@ PATTERN FORMAT - An optional prefix "`!`" which negates the pattern; any matching file excluded by a previous pattern will become - included again. It is not possible to re-include a file if a parent - directory of that file is excluded. Git doesn't list excluded - directories for performance reasons, so any patterns on contained - files have no effect, no matter where they are defined. + included again. Put a backslash ("`\`") in front of the first "`!`" for patterns that begin with a literal "`!`", for example, "`\!important!.txt`". + It is possible to re-include a file if a parent directory of that + file is excluded if certain conditions are met. See section NOTES + for detail. - If the pattern ends with a slash, it is removed for the purpose of the following description, but it would only find @@ -141,6 +141,21 @@ not tracked by Git remain untracked. To stop tracking a file that is currently tracked, use 'git rm --cached'. +To re-include files or directories when their parent directory is +excluded, the following conditions must be met: + + - The rules to exclude a directory and re-include a subset back must + be in the same .gitignore file. + + - The directory part in the re-include rules must be literal (i.e. no + wildcards) + + - The rules to exclude the parent directory must not end with a + trailing slash. + + - The rules to exclude the parent directory must have at least one + slash. + EXAMPLES -------- diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 8c6478b2f2..e225974253 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -413,8 +413,9 @@ exclude;; [[def_per_worktree_ref]]per-worktree ref:: Refs that are per-<<def_working_tree,worktree>>, rather than - global. This is presently only <<def_HEAD,HEAD>>, but might - later include other unusual refs. + global. This is presently only <<def_HEAD,HEAD>> and any refs + that start with `refs/bisect/`, but might later include other + unusual refs. [[def_pseudoref]]pseudoref:: Pseudorefs are a class of files under `$GIT_DIR` which behave diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index f1c52208f0..4f009d4424 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -701,15 +701,19 @@ include::pretty-options.txt[] --relative-date:: Synonym for `--date=relative`. ---date=(relative|local|default|iso|iso-strict|rfc|short|raw):: +--date=<format>:: Only takes effect for dates shown in human-readable format, such as when using `--pretty`. `log.date` config variable sets a default - value for the log command's `--date` option. + value for the log command's `--date` option. By default, dates + are shown in the original time zone (either committer's or + author's). If `-local` is appended to the format (e.g., + `iso-local`), the user's local time zone is used instead. + `--date=relative` shows dates relative to the current time, -e.g. ``2 hours ago''. +e.g. ``2 hours ago''. The `-local` option cannot be used with +`--raw` or `--relative`. + -`--date=local` shows timestamps in user's local time zone. +`--date=local` is an alias for `--date=default-local`. + `--date=iso` (or `--date=iso8601`) shows timestamps in a ISO 8601-like format. The differences to the strict ISO 8601 format are: @@ -732,10 +736,15 @@ format, often found in email messages. `--date=format:...` feeds the format `...` to your system `strftime`. Use `--date=format:%c` to show the date in your system locale's preferred format. See the `strftime` manual for a complete list of -format placeholders. +format placeholders. When using `-local`, the correct syntax is +`--date=format-local:...`. + -`--date=default` shows timestamps in the original time zone -(either committer's or author's). +`--date=default` is the default format, and is similar to +`--date=rfc2822`, with a few exceptions: + + - there is no comma after the day-of-week + + - the time zone is omitted when the local time zone is used ifdef::git-rev-list[] --header:: |