diff options
Diffstat (limited to 'Documentation')
57 files changed, 1371 insertions, 269 deletions
diff --git a/Documentation/RelNotes-1.7.1.1.txt b/Documentation/RelNotes-1.7.1.1.txt new file mode 100644 index 0000000000..3f6b3148a3 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.1.txt @@ -0,0 +1,96 @@ +Git v1.7.1.1 Release Notes +========================== + +Fixes since v1.7.1 +------------------ + + * Authentication over http transport can now be made lazily, in that the + request can first go to a URL without username, get a 401 response and + then the client will ask for the username to use. + + * We used to mistakenly think "../work" is a subdirectory of the current + directory when we are in "../work-xyz". + + * The attribute mechanism now allows an entry that uses an attribute + macro that set/unset one attribute, immediately followed by an + overriding setting; this makes attribute macros much easier to use. + + * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70). + + * In 1.7.0, read-tree and user commands that use the mechanism such as + checkout and merge were fixed to handle switching between branches one + of which has a file while the other has a directory at the same path + correctly even when there are some "confusing" pathnames in them. But + the algorithm used for this fix was suboptimal and had a terrible + performance degradation especially in larger trees. + + * "git am -3" did not show diagnosis when the patch in the message was corrupt. + + * After "git apply --whitespace=fix" removed trailing blank lines in an + patch in a patch series, it failed to apply later patches that depend + on the presence of such blank lines. + + * "git bundle --stdin" segfaulted. + + * "git checkout" and "git rebase" overwrote paths that are marked "assume + unchanged". + + * "git commit --amend" on a commit with an invalid author-name line that + lacks the display name didn't work. + + * "git describe" did not tie-break tags that point at the same commit + correctly; newer ones are preferred by paying attention to the + tagger date now. + + * "git diff" used to tell underlying xdiff machinery to work very hard to + minimize the output, but this often was spending too many extra cycles + for very little gain. + + * "git diff --color" did not paint extended diff headers per line + (i.e. the coloring escape sequence didn't end at the end of line), + which confused "less -R". + + * "git fetch" over HTTP verifies the downloaded packfiles more robustly. + + * The memory usage by "git index-pack" (run during "git fetch" and "git + push") got leaner. + + * "GIT_DIR=foo.git git init --bare bar.git" created foo.git instead of bar.git. + + * "git log --abbrev=$num --format='%h' ignored --abbrev=$num. + + * "git ls-files ../out/side/cwd" refused to work. + + * "git merge --log" used to replace the custom message given by "-m" with + the shortlog, instead of appending to it. + + * "git notes copy" without any other argument segfaulted. + + * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but + ignored the option itself, resulting in a bogus attempt to merge + unrelated commit. + + * "git rebase" did not faithfully reproduce a malformed author ident, that + is often seen in a repository converted from foreign SCMs. + + * "git reset --hard" started from a wrong directory and a working tree in + a nonstandard location is in use got confused. + + * "git send-email" lacked a way to specify the domainname used in the + EHLO/HELO exchange, causing rejected connection from picky servers. + It learned --smtp-domain option to solve this issue. + + * "git send-email" did not declare a content-transfer-encoding and + content-type even when its payload needs to be sent in 8-bit. + + * "git show -C -C" and other corner cases lost diff metainfo output + in 1.7.0. + + * "git stash" incorrectly lost paths in the working tree that were + previously removed from the index. + + * "git status" stopped refreshing the index by mistake in 1.7.1. + + * "git status" showed excess "hints" even when advice.statusHints is set to false. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.1.2.txt b/Documentation/RelNotes-1.7.1.2.txt new file mode 100644 index 0000000000..61ba14e262 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.2.txt @@ -0,0 +1,28 @@ +Git v1.7.1.2 Release Notes +========================== + +Fixes since v1.7.1.1 +-------------------- + + * "git commit" did not honor GIT_REFLOG_ACTION environment variable, resulting + reflog messages for cherry-pick and revert actions to be recorded as "commit". + + * "git clone/fetch/pull" issued an incorrect error message when a ref and + a symref that points to the ref were updated at the same time. This + obviously would update them to the same value, and should not result in + an error condition. + + * "git diff" inside a tree with many pathnames that have certain + characters has become very slow in 1.7.0 by mistake. + + * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option + when --keep-dashdash was in effect. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.1.txt b/Documentation/RelNotes-1.7.1.txt new file mode 100644 index 0000000000..9d89fedb36 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.txt @@ -0,0 +1,89 @@ +Git v1.7.1 Release Notes +======================== + +Updates since v1.7.0 +-------------------- + + * Eric Raymond is the maintainer of updated CIAbot scripts, in contrib/. + + * gitk updates. + + * Some commands (e.g. svn and http interfaces) that interactively ask + for a password can be told to use an external program given via + GIT_ASKPASS. + + * Conflict markers that lead the common ancestor in diff3-style output + now have a label, which hopefully would help third-party tools that + expect one. + + * Comes with an updated bash-completion script. + + * "git am" learned "--keep-cr" option to handle inputs that are + a mixture of changes to files with and without CRLF line endings. + + * "git cvsimport" learned -R option to leave revision mapping between + CVS revisions and resulting git commits. + + * "git diff --submodule" notices and describes dirty submodules. + + * "git for-each-ref" learned %(symref), %(symref:short) and %(flag) + tokens. + + * "git hash-object --stdin-paths" can take "--no-filters" option now. + + * "git init" can be told to look at init.templatedir configuration + variable (obviously that has to come from either /etc/gitconfig or + $HOME/.gitconfig). + + * "git grep" learned "--no-index" option, to search inside contents that + are not managed by git. + + * "git grep" learned --color=auto/always/never. + + * "git grep" learned to paint filename and line-number in colors. + + * "git log -p --first-parent -m" shows one-parent diff for merge + commits, instead of showing combined diff. + + * "git merge-file" learned to use custom conflict marker size and also + to use the "union merge" behaviour. + + * "git notes" command has been rewritten in C and learned many commands + and features to help you carry notes forward across rebases and amends. + + * "git request-pull" identifies the commit the request is relative to in + a more readable way. + + * "git reset" learned "--keep" option that lets you discard commits + near the tip while preserving your local changes in a way similar + to how "git checkout branch" does. + + * "git status" notices and describes dirty submodules. + + * "git svn" should work better when interacting with repositories + with CRLF line endings. + + * "git imap-send" learned to support CRAM-MD5 authentication. + + * "gitweb" installation procedure can use "minified" js/css files + better. + + * Various documentation updates. + +Fixes since v1.7.0 +------------------ + +All of the fixes in v1.7.0.X maintenance series are included in this +release, unless otherwise noted. + + * "git add frotz/nitfol" did not complain when the entire frotz/ directory + was ignored. + + * "git diff --stat" used "int" to count the size of differences, + which could result in overflowing. + + * "git rev-list --pretty=oneline" didn't terminate a record with LF for + commits without any message. + + * "git rev-list --abbrev-commit" defaulted to 40-byte abbreviations, unlike + newer tools in the git toolset. diff --git a/Documentation/RelNotes/1.7.1.3.txt b/Documentation/RelNotes/1.7.1.3.txt new file mode 100644 index 0000000000..5b18518449 --- /dev/null +++ b/Documentation/RelNotes/1.7.1.3.txt @@ -0,0 +1,10 @@ +Git v1.7.1.3 Release Notes +========================== + +This is primarily to backport support for the new "add.ignoreErrors" +name given to the existing "add.ignore-errors" configuration variable. + +The next version, Git 1.7.4, and future versions, will support both +old and incorrect name and the new corrected name, but without this +backport, users who want to use the new name "add.ignoreErrors" in +their repositories cannot use older versions of Git. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index c686f8646b..eb53e0636e 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -41,6 +41,7 @@ Checklist (and a short version for the impatient): maintainer (gitster@pobox.com) if (and only if) the patch is ready for inclusion. If you use git-send-email(1), please test it first by sending email to yourself. + - see below for instructions specific to your mailer Long version: @@ -53,6 +54,34 @@ But the patch submission requirements are a lot more relaxed here on the technical/contents front, because the core GIT is thousand times smaller ;-). So here is only the relevant bits. +(0) Decide what to base your work on. + +In general, always base your work on the oldest branch that your +change is relevant to. + + - A bugfix should be based on 'maint' in general. If the bug is not + present in 'maint', base it on 'master'. For a bug that's not yet + in 'master', find the topic that introduces the regression, and + base your work on the tip of the topic. + + - A new feature should be based on 'master' in general. If the new + feature depends on a topic that is in 'pu', but not in 'master', + base your work on the tip of that topic. + + - Corrections and enhancements to a topic not yet in 'master' should + be based on the tip of that topic. If the topic has not been merged + to 'next', it's alright to add a note to squash minor corrections + into the series. + + - In the exceptional case that a new feature depends on several topics + not in 'master', start working on 'next' or 'pu' privately and send + out patches for discussion. Before the final merge, you may have to + wait until some of the dependent topics graduate to 'master', and + rebase your work. + +To find the tip of a topic branch, run "git log --first-parent +master..pu" and look for the merge commit. The second parent of this +commit is the tip of the topic branch. (1) Make separate commits for logically separate changes. @@ -170,17 +199,16 @@ patch, format it as "multipart/signed", not a text/plain message that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is not a text/plain, it's something else. -Note that your maintainer does not necessarily read everything -on the git mailing list. If your patch is for discussion first, -send it "To:" the mailing list, and optionally "cc:" him. If it -is trivially correct or after the list reached a consensus, send -it "To:" the maintainer and optionally "cc:" the list for -inclusion. - -Also note that your maintainer does not actively involve himself in -maintaining what are in contrib/ hierarchy. When you send fixes and -enhancements to them, do not forget to "cc: " the person who primarily -worked on that hierarchy in contrib/. +Unless your patch is a very trivial and an obviously correct one, +first send it with "To:" set to the mailing list, with "cc:" listing +people who are involved in the area you are touching (the output from +"git blame $path" and "git shortlog --no-merges $path" would help to +identify them), to solicit comments and reviews. After the list +reached a consensus that it is a good idea to apply the patch, re-send +it with "To:" set to the maintainer and optionally "cc:" the list for +inclusion. Do not forget to add trailers such as "Acked-by:", +"Reviewed-by:" and "Tested-by:" after your "Signed-off-by:" line as +necessary. (4) Sign your work @@ -519,12 +547,28 @@ Gmail GMail does not appear to have any way to turn off line wrapping in the web interface, so this will mangle any emails that you send. You can however -use any IMAP email client to connect to the google imap server, and forward -the emails through that. Just make sure to disable line wrapping in that -email client. Alternatively, use "git send-email" instead. +use "git send-email" and send your patches through the GMail SMTP server, or +use any IMAP email client to connect to the google IMAP server and forward +the emails through that. + +To use "git send-email" and send your patches through the GMail SMTP server, +edit ~/.gitconfig to specify your account settings: + +[sendemail] + smtpencryption = tls + smtpserver = smtp.gmail.com + smtpuser = user@gmail.com + smtppass = p4ssw0rd + smtpserverport = 587 -Submitting properly formatted patches via Gmail is simple now that -IMAP support is available. First, edit your ~/.gitconfig to specify your +Once your commits are ready to be sent to the mailing list, run the +following commands: + + $ git format-patch --cover-letter -M origin/master -o outgoing/ + $ edit outgoing/0000-* + $ git send-email outgoing/* + +To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your account settings: [imap] @@ -538,14 +582,12 @@ account settings: You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error that the "Folder doesn't exist". -Next, ensure that your Gmail settings are correct. In "Settings" the -"Use Unicode (UTF-8) encoding for outgoing messages" should be checked. - -Once your commits are ready to send to the mailing list, run the following -command to send the patch emails to your Gmail Drafts folder. +Once your commits are ready to be sent to the mailing list, run the +following commands: - $ git format-patch -M --stdout origin/master | git imap-send + $ git format-patch --cover-letter -M --stdout origin/master | git imap-send -Go to your Gmail account, open the Drafts folder, find the patch email, fill -in the To: and CC: fields and send away! +Just make sure to disable line wrapping in the email client (GMail web +interface will line wrap no matter what, so you need to use a real +IMAP client). diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index d8205691c6..16e3c68576 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -90,9 +90,9 @@ of lines before or after the line given by <start>. running extra passes of inspection. + <num> is optional but it is the lower bound on the number of -alphanumeric characters that git must detect as moving +alphanumeric characters that git must detect as moving/copying within a file for it to associate those lines with the parent -commit. +commit. The default value is 20. -C|<num>|:: In addition to `-M`, detect lines moved or copied from other @@ -105,9 +105,11 @@ commit. looks for copies from other files in any commit. + <num> is optional but it is the lower bound on the number of -alphanumeric characters that git must detect as moving +alphanumeric characters that git must detect as moving/copying between files for it to associate those lines with the parent -commit. +commit. And the default value is 40. If there are more than one +`-C` options given, the <num> argument of the last `-C` will +take effect. -h:: --help:: diff --git a/Documentation/config.txt b/Documentation/config.txt index ce9c2509b6..6a07fe60e7 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -518,16 +518,12 @@ check that makes sure that existing object files will not get overwritten. core.notesRef:: When showing commit messages, also show notes which are stored in - the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. + the given ref. The ref must be fully qualified. If the given + ref does not exist, it is not an error but means that no + notes should be printed. + -If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes:" line. If the -given ref itself does not exist, it is not an error, but means that no -notes should be printed. -+ -This setting defaults to "refs/notes/commits", and can be overridden by -the `GIT_NOTES_REF` environment variable. +This setting defaults to "refs/notes/commits", and it can be overridden by +the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in @@ -559,6 +555,13 @@ it will be treated as a shell command. For example, defining executed from the top-level directory of a repository, which may not necessarily be the current directory. +am.keepcr:: + If true, git-am will call git-mailsplit for patches in mbox format + with parameter '--keep-cr'. In this case git-mailsplit will + not remove `\r` from lines ending with `\r\n`. Can be overrriden + by giving '--no-keep-cr' from the command line. + See linkgit:git-am[1], linkgit:git-mailsplit[1]. + apply.ignorewhitespace:: When set to 'change', tells 'git apply' to ignore changes in whitespace, in the same way as the '--ignore-space-change' @@ -687,9 +690,29 @@ color.grep:: `never`), never. When set to `true` or `auto`, use color only when the output is written to the terminal. Defaults to `false`. -color.grep.match:: - Use customized color for matches. The value of this variable - may be specified as in color.branch.<slot>. +color.grep.<slot>:: + Use customized color for grep colorization. `<slot>` specifies which + part of the line to use the specified color, and is one of ++ +-- +`context`;; + non-matching text in context lines (when using `-A`, `-B`, or `-C`) +`filename`;; + filename prefix (when not using `-h`) +`function`;; + function name lines (when using `-p`) +`linenumber`;; + line number prefix (when using `-n`) +`match`;; + matching text +`selected`;; + non-matching text in selected lines +`separator`;; + separators between fields on a line (`:`, `-`, and `=`) + and between hunks (`--`) +-- ++ +The values of these variables may be specified as in color.branch.<slot>. color.interactive:: When set to `always`, always use colors for interactive prompts @@ -851,9 +874,11 @@ format.headers:: Additional email headers to include in a patch to be submitted by mail. See linkgit:git-format-patch[1]. +format.to:: format.cc:: - Additional "Cc:" headers to include in a patch to be submitted - by mail. See the --cc option in linkgit:git-format-patch[1]. + Additional recipients to include in a patch to be submitted + by mail. See the --to and --cc options in + linkgit:git-format-patch[1]. format.subjectprefix:: The default for format-patch is to output files with the '[PATCH]' @@ -1207,6 +1232,10 @@ imap:: The configuration variables in the 'imap' section are described in linkgit:git-imap-send[1]. +init.templatedir:: + Specify the directory from which templates will be copied. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) + instaweb.browser:: Specify the program that will be used to browse your working repository in gitweb. See linkgit:git-instaweb[1]. @@ -1307,6 +1336,53 @@ mergetool.keepTemporaries:: mergetool.prompt:: Prompt before each invocation of the merge resolution program. +notes.displayRef:: + The (fully qualified) refname from which to show notes when + showing commit messages. The value of this variable can be set + to a glob, in which case notes from all matching refs will be + shown. You may also specify this configuration variable + several times. A warning will be issued for refs that do not + exist, but a glob that does not match any refs is silently + ignored. ++ +This setting can be overridden with the `GIT_NOTES_DISPLAY_REF` +environment variable, which must be a colon separated list of refs or +globs. ++ +The effective value of "core.notesRef" (possibly overridden by +GIT_NOTES_REF) is also implicitly added to the list of refs to be +displayed. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`) and this variable is set to `true`, git + automatically copies your notes from the original to the + rewritten commit. Defaults to `true`, but see + "notes.rewriteRef" below. + +notes.rewriteMode:: + When copying notes during a rewrite (see the + "notes.rewrite.<command>" option), determines what to do if + the target commit already has a note. Must be one of + `overwrite`, `concatenate`, or `ignore`. Defaults to + `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. The ref may be a + glob, in which case notes in all matching refs will be copied. + You may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_REF` +environment variable, which must be a colon separated list of refs or +globs. + pack.window:: The size of the window used by linkgit:git-pack-objects[1] when no window size is given on the command line. Defaults to 10. @@ -1440,7 +1516,7 @@ receive.denyDeletes:: the ref. Use this to prevent such a ref deletion via a push. receive.denyCurrentBranch:: - If set to true or "refuse", receive-pack will deny a ref update + If set to true or "refuse", git-receive-pack will deny a ref update to the currently checked out branch of a non-bare repository. Such a push is potentially dangerous because it brings the HEAD out of sync with the index and working tree. If set to "warn", @@ -1566,6 +1642,7 @@ sendemail.smtppass:: sendemail.suppresscc:: sendemail.suppressfrom:: sendemail.to:: +sendemail.smtpdomain:: sendemail.smtpserver:: sendemail.smtpserverport:: sendemail.smtpuser:: @@ -1612,6 +1689,15 @@ status.submodulesummary:: summary of commits for modified submodules will be shown (see --summary-limit option of linkgit:git-submodule[1]). +submodule.<name>.path:: +submodule.<name>.url:: +submodule.<name>.update:: + The path within this project, URL, and the updating strategy + for a submodule. These variables are initially populated + by 'git submodule init'; edit them to override the + URL and other values found in the `.gitmodules` file. See + linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index 0f25ba7e38..8f9a2412fd 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -56,7 +56,8 @@ combined diff format "git-diff-tree", "git-diff-files" and "git-diff" can take '-c' or '--cc' option to produce 'combined diff'. For showing a merge commit -with "git log -p", this is the default format. +with "git log -p", this is the default format; you can force showing +full diff with the '-m' option. A 'combined diff' format looks like this: ------------ diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index a1191d647b..3070dddfe2 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -117,12 +117,14 @@ any of those replacements occurred. option and lists the commits in that commit range like the 'summary' option of linkgit:git-submodule[1] does. ---color:: +--color[=<when>]:: Show colored diff. + The value must be always (the default), never, or auto. --no-color:: Turn off colored diff, even when the configuration file gives the default to color output. + Same as `--color=never`. --color-words[=<regex>]:: Show colored word diff, i.e., color words which have changed. @@ -175,7 +177,14 @@ endif::git-format-patch[] Break complete rewrite changes into pairs of delete and create. -M:: +ifndef::git-log[] Detect renames. +endif::git-log[] +ifdef::git-log[] + If generating diffs, detect and report renames for each commit. + For following files across renames while traversing history, see + `--follow`. +endif::git-log[] -C:: Detect copies as well as renames. See also `--find-copies-harder`. diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index 9310b650d3..e0ba8cc075 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -1,13 +1,8 @@ Everyday GIT With 20 Commands Or So =================================== -<<Basic Repository>> commands are needed by people who have a -repository --- that is everybody, because every working tree of -git is a repository. - -In addition, <<Individual Developer (Standalone)>> commands are -essential for anybody who makes a commit, even for somebody who -works alone. +<<Individual Developer (Standalone)>> commands are essential for +anybody who makes a commit, even for somebody who works alone. If you work with other people, you will need commands listed in the <<Individual Developer (Participant)>> section as well. @@ -20,46 +15,6 @@ administrators who are responsible for the care and feeding of git repositories. -Basic Repository[[Basic Repository]] ------------------------------------- - -Everybody uses these commands to maintain git repositories. - - * linkgit:git-init[1] or linkgit:git-clone[1] to create a - new repository. - - * linkgit:git-fsck[1] to check the repository for errors. - - * linkgit:git-gc[1] to do common housekeeping tasks such as - repack and prune. - -Examples -~~~~~~~~ - -Check health and remove cruft.:: -+ ------------- -$ git fsck <1> -$ git count-objects <2> -$ git gc <3> ------------- -+ -<1> running without `\--full` is usually cheap and assures the -repository health reasonably well. -<2> check how many loose objects there are and how much -disk space is wasted by not repacking. -<3> repacks the local repository and performs other housekeeping tasks. - -Repack a small project into single pack.:: -+ ------------- -$ git gc <1> ------------- -+ -<1> pack all the objects reachable from the refs into one pack, -then remove the other packs. - - Individual Developer (Standalone)[[Individual Developer (Standalone)]] ---------------------------------------------------------------------- @@ -67,6 +22,8 @@ A standalone individual developer does not exchange patches with other people, and works alone in a single repository, using the following commands. + * linkgit:git-init[1] to create a new repository. + * linkgit:git-show-branch[1] to see where you are. * linkgit:git-log[1] to see what happened. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index fe716b2e42..9333c42c55 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -34,6 +34,7 @@ ifndef::git-pull[] Allow several <repository> and <group> arguments to be specified. No <refspec>s may be specified. +-p:: --prune:: After fetching, remove any remote tracking branches which no longer exist on the remote. @@ -78,9 +79,16 @@ ifndef::git-pull[] -q:: --quiet:: Pass --quiet to git-fetch-pack and silence any other internally - used git commands. + used git commands. Progress is not reported to the standard error + stream. -v:: --verbose:: Be verbose. endif::git-pull[] + +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 51cbeb7032..74741a42f4 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -266,9 +266,9 @@ patch:: y - stage this hunk n - do not stage this hunk - q - quit, do not stage this hunk nor any of the remaining ones - a - stage this and all the remaining hunks in the file - d - do not stage this hunk nor any of the remaining hunks in the file + q - quit; do not stage this hunk nor any of the remaining ones + a - stage this hunk and all later hunks in the file + d - do not stage this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 23864df8da..9e62f8778f 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -9,7 +9,7 @@ git-am - Apply a series of patches from a mailbox SYNOPSIS -------- [verse] -'git am' [--signoff] [--keep] [--utf8 | --no-utf8] +'git am' [--signoff] [--keep] [--keep-cr | --no-keep-cr] [--utf8 | --no-utf8] [--3way] [--interactive] [--committer-date-is-author-date] [--ignore-date] [--ignore-space-change | --ignore-whitespace] [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] @@ -39,6 +39,13 @@ OPTIONS --keep:: Pass `-k` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). +--keep-cr:: +--no-keep-cr:: + With `--keep-cr`, call 'git mailsplit' (see linkgit:git-mailsplit[1]) + with the same option, to prevent it from stripping CR at the end of + lines. `am.keepcr` configuration variable can be used to specify the + default behaviour. `--no-keep-cr` is useful to override `am.keepcr`. + -c:: --scissors:: Remove everything in body before a scissors line (see diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 60fa684b1d..1940256930 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -8,7 +8,7 @@ git-branch - List, create, or delete branches SYNOPSIS -------- [verse] -'git branch' [--color | --no-color] [-r | -a] +'git branch' [--color[=<when>] | --no-color] [-r | -a] [-v [--abbrev=<length> | --no-abbrev]] [(--merged | --no-merged | --contains) [<commit>]] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] @@ -88,12 +88,14 @@ OPTIONS -M:: Move/rename a branch even if the new branch name already exists. ---color:: +--color[=<when>]:: Color branches to highlight current, local, and remote branches. + The value must be always (the default), never, or auto. --no-color:: Turn off branch colors, even when the configuration file gives the default to color output. + Same as `--color=never`. -r:: List or delete (if used with -d) the remote-tracking branches. diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 37c1810e3f..7b83162223 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -15,33 +15,41 @@ SYNOPSIS DESCRIPTION ----------- - -When <paths> are not given, this command switches branches by -updating the index, working tree, and HEAD to reflect the specified +Updates files in the working tree to match the version in the index +or the specified tree. If no paths are given, 'git checkout' will +also update `HEAD` to set the specified branch as the current branch. -If `-b` is given, a new branch is created and checked out, as if -linkgit:git-branch[1] were called; in this case you can -use the --track or --no-track options, which will be passed to `git -branch`. As a convenience, --track without `-b` implies branch -creation; see the description of --track below. - -When <paths> or --patch are given, this command does *not* switch -branches. It updates the named paths in the working tree from -the index file, or from a named <tree-ish> (most often a commit). In -this case, the `-b` and `--track` options are meaningless and giving -either of them results in an error. The <tree-ish> argument can be -used to specify a specific tree-ish (i.e. commit, tag or tree) -to update the index for the given paths before updating the -working tree. - -The index may contain unmerged entries after a failed merge. By -default, if you try to check out such an entry from the index, the +'git checkout' [<branch>]:: +'git checkout' -b <new branch> [<start point>]:: + + This form switches branches by updating the index, working + tree, and HEAD to reflect the specified branch. ++ +If `-b` is given, a new branch is created as if linkgit:git-branch[1] +were called and then checked out; in this case you can +use the `--track` or `--no-track` options, which will be passed to +'git branch'. As a convenience, `--track` without `-b` implies branch +creation; see the description of `--track` below. + +'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: + + When <paths> or `--patch` are given, 'git checkout' *not* switch + branches. It updates the named paths in the working tree from + the index file or from a named <tree-ish> (most often a commit). In + this case, the `-b` and `--track` options are meaningless and giving + either of them results in an error. The <tree-ish> argument can be + used to specify a specific tree-ish (i.e. commit, tag or tree) + to update the index for the given paths before updating the + working tree. ++ +The index may contain unmerged entries because of a previous failed merge. +By default, if you try to check out such an entry from the index, the checkout operation will fail and nothing will be checked out. -Using -f will ignore these unmerged entries. The contents from a +Using `-f` will ignore these unmerged entries. The contents from a specific side of the merge can be checked out of the index by -using --ours or --theirs. With -m, changes made to the working tree -file can be discarded to recreate the original conflicted merge result. +using `--ours` or `--theirs`. With `-m`, changes made to the working tree +file can be discarded to re-create the original conflicted merge result. OPTIONS ------- @@ -136,6 +144,10 @@ edits from your current working tree. As a special case, the `"@\{-N\}"` syntax for the N-th last branch checks out the branch (instead of detaching). You may also specify `-` which is synonymous with `"@\{-1\}"`. ++ +As a further special case, you may use `"A...B"` as a shortcut for the +merge base of `A` and `B` if there is exactly one merge base. You can +leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. <new_branch>:: Name for the new branch. @@ -226,7 +238,7 @@ the above checkout would fail like this: + ------------ $ git checkout mytopic -fatal: Entry 'frotz' not uptodate. Cannot merge. +error: You have local changes to 'frotz'; not switching branches. ------------ + You can give the `-m` flag to the command, which would try a diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 78f4714da0..d71607a85d 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -7,7 +7,7 @@ git-cherry-pick - Apply the change introduced by an existing commit SYNOPSIS -------- -'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] <commit> +'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit> DESCRIPTION ----------- @@ -70,6 +70,10 @@ effect to your index in a row. --signoff:: Add Signed-off-by line at the end of the commit message. +--ff:: + If the current HEAD is the same as the parent of the + cherry-pick'ed commit, then a fast forward to this commit will + be performed. Author ------ diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index d15cb17d78..dc7d3d17b1 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -102,7 +102,8 @@ objects from the source repository into a pack in the cloned repository. --verbose:: -v:: - Run verbosely. + Run verbosely. Does not affect the reporting of progress status + to the standard error stream. --progress:: Progress status is reported on the standard error stream @@ -149,8 +150,7 @@ objects from the source repository into a pack in the cloned repository. --template=<template_directory>:: Specify the directory from which templates will be used; - if unset the templates are taken from the installation - defined default, typically `/usr/share/git-core/templates`. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) --depth <depth>:: Create a 'shallow' clone with a history truncated to the diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 64fb458b45..69eb86e450 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -95,10 +95,11 @@ OPTIONS read the message from the standard input. --author=<author>:: - Override the author name used in the commit. You can use the - standard `A U Thor <author@example.com>` format. Otherwise, - an existing commit that matches the given string and its author - name is used. + Override the commit author. Specify an explicit author using the + standard `A U Thor <author@example.com>` format. Otherwise <author> + is assumed to be a pattern and is used to search for an existing + commit by that author (i.e. rev-list --all -i --author=<author>); + the commit author is then copied from the first such commit found. --date=<date>:: Override the author date used in the commit. diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index ddfcb3d143..8bcd875a67 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -13,7 +13,7 @@ SYNOPSIS [-A <author-conv-file>] [-p <options-for-cvsps>] [-P <file>] [-C <git_repository>] [-z <fuzz>] [-i] [-k] [-u] [-s <subst>] [-a] [-m] [-M <regex>] [-S <regex>] [-L <commitlimit>] - [-r <remote>] [<CVS_module>] + [-r <remote>] [-R] [<CVS_module>] DESCRIPTION @@ -157,6 +157,22 @@ It is not recommended to use this feature if you intend to export changes back to CVS again later with 'git cvsexportcommit'. +-R:: + Generate a `$GIT_DIR/cvs-revisions` file containing a mapping from CVS + revision numbers to newly-created Git commit IDs. The generated file + will contain one line for each (filename, revision) pair imported; + each line will look like ++ +--------- +src/widget.c 1.1 1d862f173cdc7325b6fa6d2ae1cfd61fd1b512b7 +--------- ++ +The revision data is appended to the file if it already exists, for use when +doing incremental imports. ++ +This option may be useful if you have CVS revision numbers stored in commit +messages, bug-tracking systems, email archives, and the like. + -h:: Print a short usage message and exit. diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 9674f9de67..835fb7135b 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -18,7 +18,7 @@ SYNOPSIS [--in-reply-to=Message-Id] [--suffix=.<sfx>] [--ignore-if-in-upstream] [--subject-prefix=Subject-Prefix] - [--cc=<email>] + [--to=<email>] [--cc=<email>] [--cover-letter] [<common diff options>] [ <since> | <revision range> ] @@ -162,6 +162,10 @@ will want to ensure that threading is disabled for `git send-email`. allows for useful naming of a patch series, and can be combined with the `--numbered` option. +--to=<email>:: + Add a `To:` header to the email headers. This is in addition + to any configured headers, and may be used multiple times. + --cc=<email>:: Add a `Cc:` header to the email headers. This is in addition to any configured headers, and may be used multiple times. @@ -202,8 +206,8 @@ CONFIGURATION ------------- You can specify extra mail header lines to be added to each message, defaults for the subject prefix and file suffix, number patches when -outputting more than one patch, add "Cc:" headers, configure attachments, -and sign off patches with configuration variables. +outputting more than one patch, add "To" or "Cc:" headers, configure +attachments, and sign off patches with configuration variables. ------------ [format] @@ -211,6 +215,7 @@ and sign off patches with configuration variables. subjectprefix = CHANGE suffix = .txt numbered = auto + to = <email> cc = <email> attach [ = mime-boundary-string ] signoff = true diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 189573a3b3..cbe74d531a 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -127,6 +127,13 @@ If you are expecting some objects to be collected and they aren't, check all of those locations and decide whether it makes sense in your case to remove those references. +HOOKS +----- + +The 'git gc --auto' command will run the 'pre-auto-gc' hook. See +linkgit:githooks[5] for more information. + + SEE ALSO -------- linkgit:git-prune[1] diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index ee506e67f0..912bddd7b6 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -17,7 +17,7 @@ SYNOPSIS [-z | --null] [-c | --count] [--all-match] [-q | --quiet] [--max-depth <depth>] - [--color | --no-color] + [--color[=<when>] | --no-color] [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] @@ -114,12 +114,14 @@ OPTIONS Instead of showing every matched line, show the number of lines that match. ---color:: +--color[=<when>]:: Show colored matches. + The value must be always (the default), never, or auto. --no-color:: Turn off match highlighting, even when the configuration file gives the default to color output. + Same as `--color=never`. -[ABC] <context>:: Show `context` trailing (`A` -- after), or leading (`B` @@ -181,7 +183,7 @@ OPTIONS Examples -------- -git grep 'time_t' -- '*.[ch]':: +git grep 'time_t' \-- '*.[ch]':: Looks for `time_t` in all tracked .c and .h files in the working directory and its subdirectories. diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 479fce4693..6904739a48 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git hash-object' [-t <type>] [-w] [--path=<file>|--no-filters] [--stdin] [--] <file>... -'git hash-object' [-t <type>] [-w] --stdin-paths < <list-of-paths> +'git hash-object' [-t <type>] [-w] --stdin-paths [--no-filters] < <list-of-paths> DESCRIPTION ----------- diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index ad446b0e8b..57aba42e66 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -73,6 +73,10 @@ imap.preformattedHTML:: option causes Thunderbird to send the patch as a plain/text, format=fixed email. Default is `false`. +imap.authMethod:: + Specify authenticate method for authentication with IMAP server. + Current supported method is 'CRAM-MD5' only. + Examples ~~~~~~~~ diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 7ee102da48..246b07ebf9 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -28,14 +28,8 @@ current working directory. --template=<template_directory>:: -Provide the directory from which templates will be used. The default template -directory is `/usr/share/git-core/templates`. - -When specified, `<template_directory>` is used as the source of the template -files rather than the default. The template files include some directory -structure, some suggested "exclude patterns", and copies of non-executing -"hook" files. The suggested patterns and hook files are all modifiable and -extensible. +Specify the directory from which templates will be used. (See the "TEMPLATE +DIRECTORY" section below.) --shared[={false|true|umask|group|all|world|everybody|0xxx}]:: @@ -106,6 +100,25 @@ of the repository, such as installing the default hooks and setting the configuration variables. The old name is retained for backward compatibility reasons. +TEMPLATE DIRECTORY +------------------ + +The template directory contains files and directories that will be copied to +the `$GIT_DIR` after it is created. + +The template directory used will (in order): + + - The argument given with the `--template` option. + + - The contents of the `$GIT_TEMPLATE_DIR` environment variable. + + - The `init.templatedir` configuration variable. + + - The default template directory: `/usr/share/git-core/templates`. + +The default template directory includes some directory structure, some +suggested "exclude patterns", and copies of sample "hook" files. +The suggested patterns and hook files are all modifiable and extensible. EXAMPLES -------- diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 0e39bb61ee..d7f6a9cc3e 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -118,11 +118,62 @@ git log master --not --remotes=*/master:: Shows all commits that are in local master but not in any remote repository master branches. +git log -p -m --first-parent:: + + Shows the history including change diffs, but only from the + "main branch" perspective, skipping commits that come from merged + branches, and showing full diffs of changes introduced by the merges. + This makes sense only when following a strict policy of merging all + topic branches when staying on a single integration branch. + + Discussion ---------- include::i18n.txt[] +Configuration +------------- + +See linkgit:git-config[1] for core variables and linkgit:git-diff[1] +for settings related to diff generation. + +format.pretty:: + Default for the `--format` option. (See "PRETTY FORMATS" above.) + Defaults to "medium". + +i18n.logOutputEncoding:: + Encoding to use when displaying logs. (See "Discussion", above.) + Defaults to the value of `i18n.commitEncoding` if set, UTF-8 + otherwise. + +log.date:: + Default format for human-readable dates. (Compare the + `--date` option.) Defaults to "default", which means to write + dates like `Sat May 8 19:35:34 2010 -0500`. + +log.showroot:: + If `false`, 'git log' and related commands will not treat the + initial commit as a big creation event. Any root commits in + `git log -p` output would be shown without a diff attached. + The default is `true`. + +mailmap.file:: + See linkgit:git-shortlog[1]. + +notes.displayRef:: + Which refs, in addition to the default set by `core.notesRef` + or 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'log' family of commands. See + linkgit:git-notes[1]. ++ +May be an unabbreviated ref name or a glob and may be specified +multiple times. A warning will be issued for refs that do not exist, +but a glob that does not match any refs is silently ignored. ++ +This setting can be disabled by the `--no-standard-notes` option, +overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +and supplemented by the `--show-notes` option. Author ------ diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index e3d58cbac3..3ea5aad56c 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -40,16 +40,16 @@ OPTIONS -u:: The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME - transfer encoding, re-coded in UTF-8 by transliterating + transfer encoding, re-coded in the charset specified by + i18n.commitencoding (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset conversion, even with this flag. --encoding=<encoding>:: - Similar to -u but if the local convention is different - from what is specified by i18n.commitencoding, this flag - can be used to override it. + Similar to -u. But when re-coding, the charset specified here is + used instead of the one specified by i18n.commitencoding or UTF-8. -n:: Disable all charset re-coding of the metadata. diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index 5cc94ec53d..a634485281 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -7,7 +7,7 @@ git-mailsplit - Simple UNIX mbox splitter program SYNOPSIS -------- -'git mailsplit' [-b] [-f<nn>] [-d<prec>] -o<directory> [--] [<mbox>|<Maildir>...] +'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [<mbox>|<Maildir>...] DESCRIPTION ----------- @@ -43,6 +43,9 @@ OPTIONS Skip the first <nn> numbers, for example if -f3 is specified, start the numbering with 0004. +--keep-cr:: + Do not remove `\r` from lines ending with `\r\n`. + Author ------ Written by Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index 234269ae59..f334d694e0 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git merge-file' [-L <current-name> [-L <base-name> [-L <other-name>]]] - [--ours|--theirs] [-p|--stdout] [-q|--quiet] + [--ours|--theirs|--union] [-p|--stdout] [-q|--quiet] [--marker-size=<n>] <current-file> <base-file> <other-file> @@ -35,9 +35,10 @@ normally outputs a warning and brackets the conflict with lines containing >>>>>>> B If there are conflicts, the user should edit the result and delete one of -the alternatives. When `--ours` or `--theirs` option is in effect, however, -these conflicts are resolved favouring lines from `<current-file>` or -lines from `<other-file>` respectively. +the alternatives. When `--ours`, `--theirs`, or `--union` option is in effect, +however, these conflicts are resolved favouring lines from `<current-file>`, +lines from `<other-file>`, or lines from both respectively. The length of the +conflict markers can be given with the `--marker-size` option. The exit value of this program is negative on error, and the number of conflicts otherwise. If the merge was clean, the exit value is 0. @@ -67,8 +68,9 @@ OPTIONS --ours:: --theirs:: +--union:: Instead of leaving conflicts in the file, resolve conflicts - favouring our (or their) side of the lines. + favouring our (or their or both) side of the lines. EXAMPLES diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c2325ef90e..84043cc5b2 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -58,7 +58,12 @@ include::merge-options.txt[] -m <msg>:: Set the commit message to be used for the merge commit (in - case one is created). The 'git fmt-merge-msg' command can be + case one is created). + + If `--log` is specified, a shortlog of the commits being merged + will be appended to the specified message. + + The 'git fmt-merge-msg' command can be used to give a good default for automated 'git merge' invocations. diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 55735faf7b..e4ed016146 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -72,6 +72,16 @@ success of the resolution after the custom tool has exited. This is the default behaviour; the option is provided to override any configuration settings. +TEMPORARY FILES +--------------- +`git mergetool` creates `*.orig` backup files while resolving merges. +These are safe to remove once a file has been merged and its +`git mergetool` session has completed. + +Setting the `mergetool.keepBackup` configuration variable to `false` +causes `git mergetool` to automatically remove the backup as files +are successfully merged. + Author ------ Written by Theodore Y Ts'o <tytso@mit.edu> diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index d4487cab52..de63ef0745 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -3,57 +3,275 @@ git-notes(1) NAME ---- -git-notes - Add/inspect commit notes +git-notes - Add or inspect object notes SYNOPSIS -------- [verse] -'git notes' (edit [-F <file> | -m <msg>] | show) [commit] +'git notes' [list [<object>]] +'git notes' add [-f] [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] +'git notes' copy [-f] ( --stdin | <from-object> <to-object> ) +'git notes' append [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] +'git notes' edit [<object>] +'git notes' show [<object>] +'git notes' remove [<object>] +'git notes' prune + DESCRIPTION ----------- -This command allows you to add notes to commit messages, without -changing the commit. To discern these notes from the message stored -in the commit object, the notes are indented like the message, after -an unindented line saying "Notes:". +Adds, removes, or reads notes attached to objects, without touching +the objects themselves. + +By default, notes are saved to and read from `refs/notes/commits`, but +this default can be overridden. See the OPTIONS, CONFIGURATION, and +ENVIRONMENT sections below. If this ref does not exist, it will be +quietly created when it is first needed to store a note. + +A typical use of notes is to supplement a commit message without +changing the commit itself. Notes can be shown by 'git log' along with +the original commit message. To distinguish these notes from the +message stored in the commit object, the notes are indented like the +message, after an unindented line saying "Notes (<refname>):" (or +"Notes:" for `refs/notes/commits`). -To disable commit notes, you have to set the config variable -core.notesRef to the empty string. Alternatively, you can set it -to a different ref, something like "refs/notes/bugzilla". This setting -can be overridden by the environment variable "GIT_NOTES_REF". +To change which notes are shown by 'git log', see the +"notes.displayRef" configuration in linkgit:git-log[1]. + +See the "notes.rewrite.<command>" configuration for a way to carry +notes across commands that rewrite commits. SUBCOMMANDS ----------- +list:: + List the notes object for a given object. If no object is + given, show a list of all note objects and the objects they + annotate (in the format "<note object> <annotated object>"). + This is the default subcommand if no subcommand is given. + +add:: + Add notes for a given object (defaults to HEAD). Abort if the + object already has notes (use `-f` to overwrite an + existing note). + +copy:: + Copy the notes for the first object onto the second object. + Abort if the second object already has notes, or if the first + object has none (use -f to overwrite existing notes to the + second object). This subcommand is equivalent to: + `git notes add [-f] -C $(git notes list <from-object>) <to-object>` ++ +In `\--stdin` mode, take lines in the format ++ +---------- +<from-object> SP <to-object> [ SP <rest> ] LF +---------- ++ +on standard input, and copy the notes from each <from-object> to its +corresponding <to-object>. (The optional `<rest>` is ignored so that +the command can read the input given to the `post-rewrite` hook.) + +append:: + Append to the notes of an existing object (defaults to HEAD). + Creates a new notes object if needed. + edit:: - Edit the notes for a given commit (defaults to HEAD). + Edit the notes for a given object (defaults to HEAD). show:: - Show the notes for a given commit (defaults to HEAD). + Show the notes for a given object (defaults to HEAD). + +remove:: + Remove the notes for a given object (defaults to HEAD). + This is equivalent to specifying an empty note message to + the `edit` subcommand. +prune:: + Remove all notes for non-existing/unreachable objects. OPTIONS ------- +-f:: +--force:: + When adding notes to an object that already has notes, + overwrite the existing notes (instead of aborting). + -m <msg>:: +--message=<msg>:: Use the given note message (instead of prompting). - If multiple `-m` (or `-F`) options are given, their - values are concatenated as separate paragraphs. + If multiple `-m` options are given, their values + are concatenated as separate paragraphs. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. -F <file>:: +--file=<file>:: Take the note message from the given file. Use '-' to read the note message from the standard input. - If multiple `-F` (or `-m`) options are given, their - values are concatenated as separate paragraphs. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. + +-C <object>:: +--reuse-message=<object>:: + Take the note message from the given blob object (for + example, another note). + +-c <object>:: +--reedit-message=<object>:: + Like '-C', but with '-c' the editor is invoked, so that + the user can further edit the note message. + +--ref <ref>:: + Manipulate the notes tree in <ref>. This overrides + 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref + is taken to be in `refs/notes/` if it is not qualified. + + +DISCUSSION +---------- + +Commit notes are blobs containing extra information about an object +(usually information to supplement a commit's message). These blobs +are taken from notes refs. A notes ref is usually a branch which +contains "files" whose paths are the object names for the objects +they describe, with some directory separators included for performance +reasons footnote:[Permitted pathnames have the form +'ab'`/`'cd'`/`'ef'`/`'...'`/`'abcdef...': a sequence of directory +names of two hexadecimal digits each followed by a filename with the +rest of the object ID.]. + +Every notes change creates a new commit at the specified notes ref. +You can therefore inspect the history of the notes by invoking, e.g., +`git log -p notes/commits`. Currently the commit message only records +which operation triggered the update, and the commit authorship is +determined according to the usual rules (see linkgit:git-commit[1]). +These details may change in the future. + +It is also permitted for a notes ref to point directly to a tree +object, in which case the history of the notes can be read with +`git log -p -g <refname>`. + + +EXAMPLES +-------- + +You can use notes to add annotations with information that was not +available at the time a commit was written. + +------------ +$ git notes add -m 'Tested-by: Johannes Sixt <j6t@kdbg.org>' 72a144e2 +$ git show -s 72a144e +[...] + Signed-off-by: Junio C Hamano <gitster@pobox.com> + +Notes: + Tested-by: Johannes Sixt <j6t@kdbg.org> +------------ + +In principle, a note is a regular Git blob, and any kind of +(non-)format is accepted. You can binary-safely create notes from +arbitrary files using 'git hash-object': + +------------ +$ cc *.c +$ blob=$(git hash-object -w a.out) +$ git notes --ref=built add -C "$blob" HEAD +------------ + +Of course, it doesn't make much sense to display non-text-format notes +with 'git log', so if you use such notes, you'll probably need to write +some special-purpose tools to do something useful with them. + + +CONFIGURATION +------------- + +core.notesRef:: + Notes ref to read and manipulate instead of + `refs/notes/commits`. Must be an unabbreviated ref name. + This setting can be overridden through the environment and + command line. + +notes.displayRef:: + Which ref (or refs, if a glob or specified more than once), in + addition to the default set by `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'git log' family of commands. + This setting can be overridden on the command line or by the + 'GIT_NOTES_DISPLAY_REF' environment variable. + See linkgit:git-log[1]. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`), if this variable is `false`, git will not copy + notes from the original to the rewritten commit. Defaults to + `true`. See also "`notes.rewriteRef`" below. ++ +This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +environment variable. + +notes.rewriteMode:: + When copying notes during a rewrite, what to do if the target + commit already has a note. Must be one of `overwrite`, + `concatenate`, and `ignore`. Defaults to `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. May be a glob, + in which case notes in all matching refs will be copied. You + may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. + + +ENVIRONMENT +----------- + +'GIT_NOTES_REF':: + Which ref to manipulate notes from, instead of `refs/notes/commits`. + This overrides the `core.notesRef` setting. + +'GIT_NOTES_DISPLAY_REF':: + Colon-delimited list of refs or globs indicating which refs, + in addition to the default from `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages. + This overrides the `notes.displayRef` setting. ++ +A warning will be issued for refs that do not exist, but a glob that +does not match any refs is silently ignored. + +'GIT_NOTES_REWRITE_MODE':: + When copying notes during a rewrite, what to do if the target + commit already has a note. + Must be one of `overwrite`, `concatenate`, and `ignore`. + This overrides the `core.rewriteMode` setting. + +'GIT_NOTES_REWRITE_REF':: + When rewriting commits, which notes to copy from the original + to the rewritten commit. Must be a colon-delimited list of + refs or globs. ++ +If not set in the environment, the list of notes to copy depends +on the `notes.rewrite.<command>` and `notes.rewriteRef` settings. Author ------ -Written by Johannes Schindelin <johannes.schindelin@gmx.de> +Written by Johannes Schindelin <johannes.schindelin@gmx.de> and +Johan Herland <johan@herland.net> Documentation ------------- -Documentation by Johannes Schindelin +Documentation by Johannes Schindelin and Johan Herland GIT --- diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 31f42ea21a..ab4de10358 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -31,6 +31,16 @@ in a state that is hard to back out of in the case of a conflict. OPTIONS ------- +-q:: +--quiet:: + This is passed to both underlying git-fetch to squelch reporting of + during transfer, and underlying git-merge to squelch output during + merging. + +-v:: +--verbose:: + Pass --verbose to git-fetch and git-merge. + Options related to merging ~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 7a4e507c4b..48570242fb 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -146,14 +146,21 @@ useful if you write an alias or script around 'git push'. receiver share many of the same objects in common. The default is \--thin. +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. + -v:: --verbose:: Run verbosely. --q:: ---quiet:: - Suppress all output, including the listing of updated refs, - unless an error occurs. +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. include::urls-remotes.txt[] diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 823f2a4638..be23ad2359 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -206,6 +206,10 @@ OPTIONS --onto option is not specified, the starting point is <upstream>. May be any valid commit, and not just an existing branch name. ++ +As a special case, you may use "A...B" as a shortcut for the +merge base of A and B if there is exactly one merge base. You can +leave out at most one of A and B, in which case it defaults to HEAD. <upstream>:: Upstream branch to compare against. May be any valid commit, @@ -274,9 +278,16 @@ which makes little sense. -f:: --force-rebase:: Force the rebase even if the current branch is a descendant - of the commit you are rebasing onto. Normally the command will + of the commit you are rebasing onto. Normally non-interactive rebase will exit with the message "Current branch is up to date" in such a situation. + Incompatible with the --interactive option. ++ +You may find this (or --no-ff with an interactive rebase) helpful after +reverting a topic branch merge, as this option recreates the topic branch with +fresh commits so it can be remerged successfully without needing to "revert +the reversion" (see the +link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). --ignore-whitespace:: --whitespace=<option>:: @@ -288,6 +299,7 @@ which makes little sense. --ignore-date:: These flags are passed to 'git am' to easily change the dates of the rebased commits (see linkgit:git-am[1]). + Incompatible with the --interactive option. -i:: --interactive:: @@ -298,6 +310,11 @@ which makes little sense. -p:: --preserve-merges:: Instead of ignoring merges, try to recreate them. ++ +This uses the `--interactive` machinery internally, but combining it +with the `--interactive` option explicitly is generally not a good +idea unless you know what you are doing (see BUGS below). + --root:: Rebase all commits reachable from <branch>, instead of @@ -316,7 +333,19 @@ which makes little sense. commit to be modified, and change the action of the moved commit from `pick` to `squash` (or `fixup`). + -This option is only valid when '--interactive' option is used. +This option is only valid when the '--interactive' option is used. + +--no-ff:: + With --interactive, cherry-pick all rebased commits instead of + fast-forwarding over the unchanged ones. This ensures that the + entire history of the rebased branch is composed of new commits. ++ +Without --interactive, this is a synonym for --force-rebase. ++ +You may find this helpful after reverting a topic branch merge, as this option +recreates the topic branch with fresh commits so it can be remerged +successfully without needing to "revert the reversion" (see the +link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). include::merge-strategies.txt[] @@ -587,6 +616,28 @@ The ripple effect of a "hard case" recovery is especially bad: case" recovery too! +BUGS +---- +The todo list presented by `--preserve-merges --interactive` does not +represent the topology of the revision graph. Editing commits and +rewording their commit messages should work fine, but attempts to +reorder commits tend to produce counterintuitive results. + +For example, an attempt to rearrange +------------ +1 --- 2 --- 3 --- 4 --- 5 +------------ +to +------------ +1 --- 2 --- 4 --- 3 --- 5 +------------ +by moving the "pick 4" line will result in the following history: +------------ + 3 + / +1 --- 2 --- 4 --- 5 +------------ + Authors ------ Written by Junio C Hamano <gitster@pobox.com> and diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 1b5f61aa0b..3a23477ce7 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -3,20 +3,69 @@ git-remote-helpers(1) NAME ---- -git-remote-helpers - Helper programs for interoperation with remote git +git-remote-helpers - Helper programs to interact with remote repositories SYNOPSIS -------- -'git remote-<transport>' <remote> +'git remote-<transport>' <repository> [<URL>] DESCRIPTION ----------- -These programs are normally not used directly by end users, but are -invoked by various git programs that interact with remote repositories -when the repository they would operate on will be accessed using -transport code not linked into the main git binary. Various particular -helper programs will behave as documented here. +Remote helper programs are normally not used directly by end users, +but they are invoked by git when it needs to interact with remote +repositories git does not support natively. A given helper will +implement a subset of the capabilities documented here. When git +needs to interact with a repository using a remote helper, it spawns +the helper as an independent process, sends commands to the helper's +standard input, and expects results from the helper's standard +output. Because a remote helper runs as an independent process from +git, there is no need to re-link git to add a new helper, nor any +need to link the helper with the implementation of git. + +Every helper must support the "capabilities" command, which git will +use to determine what other commands the helper will accept. Other +commands generally concern facilities like discovering and updating +remote refs, transporting objects between the object database and +the remote repository, and updating the local object store. + +Helpers supporting the 'fetch' capability can discover refs from the +remote repository and transfer objects reachable from those refs to +the local object store. Helpers supporting the 'push' capability can +transfer local objects to the remote repository and update remote refs. + +Git comes with a "curl" family of remote helpers, that handle various +transport protocols, such as 'git-remote-http', 'git-remote-https', +'git-remote-ftp' and 'git-remote-ftps'. They implement the capabilities +'fetch', 'option', and 'push'. + +INVOCATION +---------- + +Remote helper programs are invoked with one or (optionally) two +arguments. The first argument specifies a remote repository as in git; +it is either the name of a configured remote or a URL. The second +argument specifies a URL; it is usually of the form +'<transport>://<address>', but any arbitrary string is possible. + +When git encounters a URL of the form '<transport>://<address>', where +'<transport>' is a protocol that it cannot handle natively, it +automatically invokes 'git remote-<transport>' with the full URL as +the second argument. If such a URL is encountered directly on the +command line, the first argument is the same as the second, and if it +is encountered in a configured remote, the first argument is the name +of that remote. + +A URL of the form '<transport>::<address>' explicitly instructs git to +invoke 'git remote-<transport>' with '<address>' as the second +argument. If such a URL is encountered directly on the command line, +the first argument is '<address>', and if it is encountered in a +configured remote, the first argument is the name of that remote. + +Additionally, when a configured remote has 'remote.<name>.vcs' set to +'<transport>', git explicitly invokes 'git remote-<transport>' with +'<name>' as the first argument. If set, the second argument is +'remote.<name>.url'; otherwise, the second argument is omitted. COMMANDS -------- @@ -25,8 +74,8 @@ Commands are given by the caller on the helper's standard input, one per line. 'capabilities':: Lists the capabilities of the helper, one per line, ending - with a blank line. Each capability may be preceded with '*'. - This marks them mandatory for git version using the remote + with a blank line. Each capability may be preceded with '*', + which marks them mandatory for git version using the remote helper to understand (unknown mandatory capability is fatal error). @@ -35,27 +84,27 @@ Commands are given by the caller on the helper's standard input, one per line. [<attr> ...]". The value may be a hex sha1 hash, "@<dest>" for a symref, or "?" to indicate that the helper could not get the value of the ref. A space-separated list of attributes follows - the name; unrecognized attributes are ignored. After the - complete list, outputs a blank line. + the name; unrecognized attributes are ignored. The list ends + with a blank line. + If 'push' is supported this may be called as 'list for-push' to obtain the current refs prior to sending one or more 'push' commands to the helper. 'option' <name> <value>:: - Set the transport helper option <name> to <value>. Outputs a + Sets the transport helper option <name> to <value>. Outputs a single line containing one of 'ok' (option successfully set), 'unsupported' (option not recognized) or 'error <msg>' - (option <name> is supported but <value> is not correct + (option <name> is supported but <value> is not valid for it). Options should be set before other commands, - and may how those commands behave. + and may influence the behavior of those commands. + Supported if the helper has the "option" capability. 'fetch' <sha1> <name>:: Fetches the given object, writing the necessary objects to the database. Fetch commands are sent in a batch, one - per line, and the batch is terminated with a blank line. + per line, terminated with a blank line. Outputs a single blank line when all fetch commands in the same batch are complete. Only objects which were reported in the ref list with a sha1 may be fetched this way. @@ -67,7 +116,7 @@ suitably updated. Supported if the helper has the "fetch" capability. 'push' +<src>:<dst>:: - Pushes the given <src> commit or branch locally to the + Pushes the given local <src> commit or branch to the remote branch described by <dst>. A batch sequence of one or more push commands is terminated with a blank line. + @@ -91,6 +140,9 @@ Supported if the helper has the "push" capability. by applying the refspecs from the "refspec" capability to the name of the ref. + +Especially useful for interoperability with a foreign versioning +system. ++ Supported if the helper has the "import" capability. 'connect' <service>:: @@ -119,16 +171,11 @@ CAPABILITIES ------------ 'fetch':: - This helper supports the 'fetch' command. - 'option':: - This helper supports the option command. - 'push':: - This helper supports the 'push' command. - 'import':: - This helper supports the 'import' command. +'connect':: + This helper supports the corresponding command with the same name. 'refspec' 'spec':: When using the import command, expect the source ref to have @@ -140,9 +187,6 @@ CAPABILITIES all, it must cover all refs reported by the list command; if it is not used, it is effectively "*:*" -'connect':: - This helper supports the 'connect' command. - REF LIST ATTRIBUTES ------------------- @@ -158,19 +202,19 @@ REF LIST ATTRIBUTES OPTIONS ------- 'option verbosity' <N>:: - Change the level of messages displayed by the helper. - When N is 0 the end-user has asked the process to be - quiet, and the helper should produce only error output. - N of 1 is the default level of verbosity, higher values + Changes the verbosity of messages displayed by the helper. + A value of 0 for N means that processes operate + quietly, and the helper produces only error output. + 1 is the default level of verbosity, and higher values of N correspond to the number of -v flags passed on the command line. 'option progress' \{'true'|'false'\}:: - Enable (or disable) progress messages displayed by the + Enables (or disables) progress messages displayed by the transport helper during a command. 'option depth' <depth>:: - Deepen the history of a shallow repository. + Deepens the history of a shallow repository. 'option followtags' \{'true'|'false'\}:: If enabled the helper should automatically fetch annotated @@ -186,11 +230,15 @@ OPTIONS helpers this only applies to the 'push', if supported. 'option servpath <c-style-quoted-path>':: - Set service path (--upload-pack, --receive-pack etc.) for - next connect. Remote helper MAY support this option. Remote - helper MUST NOT rely on this option being set before + Sets service path (--upload-pack, --receive-pack etc.) for + next connect. Remote helper may support this option, but + must not rely on this option being set before connect request occurs. +SEE ALSO +-------- +linkgit:git-remote[1] + Documentation ------------- Documentation by Daniel Barkalow and Ilari Liusvaara diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index acc220a00f..db99d4786e 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -7,7 +7,7 @@ git-rerere - Reuse recorded resolution of conflicted merges SYNOPSIS -------- -'git rerere' ['clear'|'diff'|'status'|'gc'] +'git rerere' ['clear'|'forget' [<pathspec>]|'diff'|'status'|'gc'] DESCRIPTION ----------- @@ -40,6 +40,11 @@ This resets the metadata used by rerere if a merge resolution is to be aborted. Calling 'git am [--skip|--abort]' or 'git rebase [--skip|--abort]' will automatically invoke this command. +'forget' <pathspec>:: + +This resets the conflict resolutions which rerere has recorded for the current +conflict in <pathspec>. The <pathspec> is optional. + 'diff':: This displays diffs for the current state of the resolution. It is diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 168db08627..645f0c1748 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -8,7 +8,7 @@ git-reset - Reset current HEAD to the specified state SYNOPSIS -------- [verse] -'git reset' [--mixed | --soft | --hard | --merge] [-q] [<commit>] +'git reset' [--mixed | --soft | --hard | --merge | --keep] [-q] [<commit>] 'git reset' [-q] [<commit>] [--] <paths>... 'git reset' --patch [<commit>] [--] [<paths>...] @@ -52,6 +52,14 @@ OPTIONS and updates the files that are different between the named commit and the current commit in the working tree. +--keep:: + Reset the index to the given commit, keeping local changes in + the working tree since the current commit, while updating + working tree files without local changes to what appears in + the given commit. If a file that is different between the + current commit and the given commit has local changes, reset + is aborted. + -p:: --patch:: Interactively select hunks in the difference between the index @@ -93,6 +101,7 @@ in the index and in state D in HEAD. --mixed A D D --hard D D D --merge (disallowed) + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -100,6 +109,7 @@ in the index and in state D in HEAD. --mixed A C C --hard C C C --merge (disallowed) + --keep A C C working index HEAD target working index HEAD ---------------------------------------------------- @@ -107,6 +117,7 @@ in the index and in state D in HEAD. --mixed B D D --hard D D D --merge D D D + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -114,6 +125,7 @@ in the index and in state D in HEAD. --mixed B C C --hard C C C --merge C C C + --keep B C C working index HEAD target working index HEAD ---------------------------------------------------- @@ -121,6 +133,7 @@ in the index and in state D in HEAD. --mixed B D D --hard D D D --merge (disallowed) + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -128,6 +141,7 @@ in the index and in state D in HEAD. --mixed B C C --hard C C C --merge B C C + --keep B C C "reset --merge" is meant to be used when resetting out of a conflicted merge. Any mergy operation guarantees that the work tree file that is @@ -138,6 +152,15 @@ between the index and the work tree, then it means that we are not resetting out from a state that a mergy operation left after failing with a conflict. That is why we disallow --merge option in this case. +"reset --keep" is meant to be used when removing some of the last +commits in the current branch while keeping changes in the working +tree. If there could be conflicts between the changes in the commit we +want to remove and the changes in the working tree we want to keep, +the reset is disallowed. That's why it is disallowed if there are both +changes between the working tree and HEAD, and between HEAD and the +target. To be safe, it is also disallowed when there are unmerged +entries. + The following tables show what happens when there are unmerged entries: @@ -147,6 +170,7 @@ entries: --mixed X B B --hard B B B --merge B B B + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -154,6 +178,7 @@ entries: --mixed X A A --hard A A A --merge A A A + --keep (disallowed) X means any state and U means an unmerged index. @@ -325,6 +350,32 @@ $ git add frotz.c <3> <2> This commits all other changes in the index. <3> Adds the file to the index again. +Keep changes in working tree while discarding some previous commits:: ++ +Suppose you are working on something and you commit it, and then you +continue working a bit more, but now you think that what you have in +your working tree should be in another branch that has nothing to do +with what you commited previously. You can start a new branch and +reset it while keeping the changes in your work tree. ++ +------------ +$ git tag start +$ git checkout -b branch1 +$ edit +$ git commit ... <1> +$ edit +$ git checkout -b branch2 <2> +$ git reset --keep start <3> +------------ ++ +<1> This commits your first edits in branch1. +<2> In the ideal world, you could have realized that the earlier + commit did not belong to the new topic when you created and switched + to branch2 (i.e. "git checkout -b branch2 start"), but nobody is + perfect. +<3> But you can use "reset --keep" to remove the unwanted commit after + you switched to "branch2". + Author ------ Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 8db600f6ba..833a2a29cc 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -256,7 +256,7 @@ the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. the branch the ref is set to build on top of. Missing ref defaults to the current branch. -* A suffix '{caret}' to a revision parameter means the first parent of +* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of that commit object. '{caret}<n>' means the <n>th parent (i.e. 'rev{caret}' is equivalent to 'rev{caret}1'). As a special rule, @@ -282,21 +282,24 @@ the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. and dereference the tag recursively until a non-tag object is found. -* A colon, followed by a slash, followed by a text: this names +* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names a commit whose commit message starts with the specified text. This name returns the youngest matching commit which is reachable from any ref. If the commit message starts with a '!', you have to repeat that; the special sequence ':/!', followed by something else than '!' is reserved for now. -* A suffix ':' followed by a path; this names the blob or tree +* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree at the given path in the tree-ish object named by the part before the colon. + ':path' (with an empty part before the colon, e.g. `:README`) + is a special case of the syntax described next: content + recorded in the index at the given path. * A colon, optionally followed by a stage number (0 to 3) and a - colon, followed by a path; this names a blob object in the - index at the given path. Missing stage number (and the colon - that follows it) names a stage 0 entry. During a merge, stage + colon, followed by a path (e.g. `:0:README`); this names a blob object in the + index at the given path. Missing stage number (and the colon + that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage 1 is the common ancestor, stage 2 is the target branch's version (typically the current branch), and stage 3 is the version from the branch being merged. diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index ced35b2f53..c283084272 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -101,6 +101,15 @@ See the CONFIGURATION section for 'sendemail.multiedit'. + The --to option must be repeated for each user you want on the to list. +--8bit-encoding=<encoding>:: + When encountering a non-ASCII message or subject that does not + declare its encoding, add headers/quoting to indicate it is + encoded in <encoding>. Default is the value of the + 'sendemail.assume8bitEncoding'; if that is unspecified, this + will be prompted for if any non-ASCII files are encountered. ++ +Note that no attempts whatsoever are made to validate the encoding. + Sending ~~~~~~~ @@ -119,6 +128,13 @@ Sending value reverts to plain SMTP. Default is the value of 'sendemail.smtpencryption'. +--smtp-domain=<FQDN>:: + Specifies the Fully Qualified Domain Name (FQDN) used in the + HELO/EHLO command to the SMTP server. Some servers require the + FQDN to match your IP address. If not set, git send-email attempts + to determine your FQDN automatically. Default is the value of + 'sendemail.smtpdomain'. + --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as @@ -300,6 +316,21 @@ sendemail.confirm:: in the previous section for the meaning of these values. +Use gmail as the smtp server +---------------------------- + +Add the following section to the config file: + + [sendemail] + smtpencryption = tls + smtpserver = smtp.gmail.com + smtpuser = yourname@gmail.com + smtpserverport = 587 + +Note: the following perl modules are required + Net::SMTP::SSL, MIME::Base64 and Authen::SASL + + Author ------ Written by Ryan Anderson <ryan@michonline.com> diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index dfd4d0c223..bc1ac77495 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] git log --pretty=short | 'git shortlog' [-h] [-n] [-s] [-e] [-w] -'git shortlog' [-n|--numbered] [-s|--summary] [-e|--email] [-w[<width>[,<indent1>[,<indent2>]]]] [<committish>...] +'git shortlog' [-n|--numbered] [-s|--summary] [-e|--email] [-w[<width>[,<indent1>[,<indent2>]]]] <commit>... DESCRIPTION ----------- @@ -19,6 +19,11 @@ the first line of the commit message will be shown. Additionally, "[PATCH]" will be stripped from the commit description. +If no revisions are passed on the command line and either standard input +is not a terminal or there is no current branch, 'git shortlog' will +output a summary of the log read from standard input, without +reference to the current repository. + OPTIONS ------- @@ -39,6 +44,14 @@ OPTIONS --email:: Show the email address of each author. +--format[='<format>']:: + Instead of the commit subject, use some other information to + describe each commit. '<format>' can be any string accepted + by the `--format` option of 'git log', such as '{asterisk} [%h] %s'. + (See the "PRETTY FORMATS" section of linkgit:git-log[1].) + + Each pretty-printed commit will be rewrapped before it is shown. + -w[<width>[,<indent1>[,<indent2>]]]:: Linewrap the output by wrapping each line at `width`. The first line of each entry is indented by `indent1` spaces, and the second diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index b9c4154e73..f1499bba88 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git show-branch' [-a|--all] [-r|--remotes] [--topo-order | --date-order] - [--current] [--color | --no-color] [--sparse] + [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]... @@ -117,13 +117,15 @@ OPTIONS When no explicit <ref> parameter is given, it defaults to the current branch (or `HEAD` if it is detached). ---color:: +--color[=<when>]:: Color the status sign (one of these: `*` `!` `+` `-`) of each commit corresponding to the branch it's in. + The value must be always (the default), never, or auto. --no-color:: Turn off colored output, even when the configuration file gives the default to color output. + Same as `--color=never`. Note that --more, --list, --independent and --merge-base options are mutually exclusive. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 68dc1879fe..765d4b312e 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -93,8 +93,6 @@ OPTIONS This option can be also used as a coarse file-level mechanism to ignore uncommitted changes in tracked files (akin to what `.gitignore` does for untracked files). -You should remember that an explicit 'git add' operation will -still cause the file to be refreshed from the working tree. Git will fail (gracefully) in case it needs to modify this file in the index e.g. when merging in a commit; thus, in case the assumed-untracked file is changed upstream, diff --git a/Documentation/git.txt b/Documentation/git.txt index 46a215824e..b5a4e3d403 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,6 +43,14 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: + +* link:v1.7.1.2/git.html[documentation for release 1.7.1.2] + +* release notes for + link:RelNotes-1.7.1.2.txt[1.7.1.2], + link:RelNotes-1.7.1.1.txt[1.7.1.1], + link:RelNotes-1.7.1.txt[1.7.1]. + * link:v1.7.0.7/git.html[documentation for release 1.7.0.7] * release notes for diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 9de8caf5d1..5d91a7e5b3 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -227,8 +227,8 @@ changes that touch a specified string, and is controlled by the commands. When diffcore-pickaxe is in use, it checks if there are -filepairs whose "original" side has the specified string and -whose "result" side does not. Such a filepair represents "the +filepairs whose "result" side has the specified string and +whose "origin" side does not. Such a filepair represents "the string appeared in this changeset". It also checks for the opposite case that loses the specified string. diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 87e2c035a7..7183aa9abb 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -317,6 +317,44 @@ This hook is invoked by 'git gc --auto'. It takes no parameter, and exiting with non-zero status from this script causes the 'git gc --auto' to abort. +post-rewrite +~~~~~~~~~~~~ + +This hook is invoked by commands that rewrite commits (`git commit +--amend`, 'git-rebase'; currently 'git-filter-branch' does 'not' call +it!). Its first argument denotes the command it was invoked by: +currently one of `amend` or `rebase`. Further command-dependent +arguments may be passed in the future. + +The hook receives a list of the rewritten commits on stdin, in the +format + + <old-sha1> SP <new-sha1> [ SP <extra-info> ] LF + +The 'extra-info' is again command-dependent. If it is empty, the +preceding SP is also omitted. Currently, no commands pass any +'extra-info'. + +The hook always runs after the automatic note copying (see +"notes.rewrite.<command>" in linkgit:git-config.txt) has happened, and +thus has access to these notes. + +The following command-specific comments apply: + +rebase:: + For the 'squash' and 'fixup' operation, all commits that were + squashed are listed as being rewritten to the squashed commit. + This means that there will be several lines sharing the same + 'new-sha1'. ++ +The commits are guaranteed to be listed in the order that they were +processed by rebase. + +There is no default 'post-rewrite' hook, but see the +`post-receive-copy-notes` script in `contrib/hooks` for an example +that copies your git-notes to the rewritten commits. + + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 98c459dc82..e10fa88b8c 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -83,16 +83,20 @@ Patterns have the following format: - If the pattern does not contain a slash '/', git treats it as a shell glob pattern and checks for a match against the - pathname without leading directories. + pathname relative to the location of the `.gitignore` file + (relative to the toplevel of the work tree if not from a + `.gitignore` file). - Otherwise, git treats the pattern as a shell glob suitable for consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will not match a / in the pathname. For example, "Documentation/\*.html" matches - "Documentation/git.html" but not - "Documentation/ppc/ppc.html". A leading slash matches the - beginning of the pathname; for example, "/*.c" matches - "cat-file.c" but not "mozilla-sha1/sha1.c". + "Documentation/git.html" but not "Documentation/ppc/ppc.html" + or "tools/perf/Documentation/perf.html". + + - A leading slash matches the beginning of the pathname. + For example, "/*.c" matches "cat-file.c" but not + "mozilla-sha1/sha1.c". An example: diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 5daf750d19..72a13d18e0 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -29,6 +29,9 @@ submodule.<name>.path:: submodule.<name>.url:: Defines an url from where the submodule repository can be cloned. + This may be either an absolute URL ready to be passed to + linkgit:git-clone[1] or (if it begins with ./ or ../) a location + relative to the superproject's origin repository. submodule.<name>.update:: Defines what to do when the submodule is updated by the superproject. diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt index 3b4a390005..ff5c0bc27a 100644 --- a/Documentation/howto/revert-a-faulty-merge.txt +++ b/Documentation/howto/revert-a-faulty-merge.txt @@ -142,6 +142,8 @@ different resolution strategies: revert of a merge was rebuilt from scratch (i.e. rebasing and fixing, as you seem to have interpreted), then re-merging the result without doing anything else fancy would be the right thing to do. + (See the ADDENDUM below for how to rebuild a branch from scratch + without changing its original branching-off point.) However, there are things to keep in mind when reverting a merge (and reverting such a revert). @@ -177,3 +179,91 @@ the answer is: "oops, I really shouldn't have merged it, because it wasn't ready yet, and I really need to undo _all_ of the merge"). So then you really should revert the merge, but when you want to re-do the merge, you now need to do it by reverting the revert. + +ADDENDUM + +Sometimes you have to rewrite one of a topic branch's commits *and* you can't +change the topic's branching-off point. Consider the following situation: + + P---o---o---M---x---x---W---x + \ / + A---B---C + +where commit W reverted commit M because it turned out that commit B was wrong +and needs to be rewritten, but you need the rewritten topic to still branch +from commit P (perhaps P is a branching-off point for yet another branch, and +you want be able to merge the topic into both branches). + +The natural thing to do in this case is to checkout the A-B-C branch and use +"rebase -i P" to change commit B. However this does not rewrite commit A, +because "rebase -i" by default fast-forwards over any initial commits selected +with the "pick" command. So you end up with this: + + P---o---o---M---x---x---W---x + \ / + A---B---C <-- old branch + \ + B'---C' <-- naively rewritten branch + +To merge A-B'-C' into the mainline branch you would still have to first revert +commit W in order to pick up the changes in A, but then it's likely that the +changes in B' will conflict with the original B changes re-introduced by the +reversion of W. + +However, you can avoid these problems if you recreate the entire branch, +including commit A: + + A'---B'---C' <-- completely rewritten branch + / + P---o---o---M---x---x---W---x + \ / + A---B---C + +You can merge A'-B'-C' into the mainline branch without worrying about first +reverting W. Mainline's history would look like this: + + A'---B'---C'------------------ + / \ + P---o---o---M---x---x---W---x---M2 + \ / + A---B---C + +But if you don't actually need to change commit A, then you need some way to +recreate it as a new commit with the same changes in it. The rebase commmand's +--no-ff option provides a way to do this: + + $ git rebase [-i] --no-ff P + +The --no-ff option creates a new branch A'-B'-C' with all-new commits (all the +SHA IDs will be different) even if in the interactive case you only actually +modify commit B. You can then merge this new branch directly into the mainline +branch and be sure you'll get all of the branch's changes. + +You can also use --no-ff in cases where you just add extra commits to the topic +to fix it up. Let's revisit the situation discussed at the start of this howto: + + P---o---o---M---x---x---W---x + \ / + A---B---C----------------D---E <-- fixed-up topic branch + +At this point, you can use --no-ff to recreate the topic branch: + + $ git checkout E + $ git rebase --no-ff P + +yielding + + A'---B'---C'------------D'---E' <-- recreated topic branch + / + P---o---o---M---x---x---W---x + \ / + A---B---C----------------D---E + +You can merge the recreated branch into the mainline without reverting commit W, +and mainline's history will look like this: + + A'---B'---C'------------D'---E' + / \ + P---o---o---M---x---x---W---x---M2 + \ / + A---B---C diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 81ac823964..722d704ff2 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -72,6 +72,7 @@ option can be used to override --squash. Synonyms to --stat and --no-stat; these are deprecated and will be removed in the future. +ifndef::git-pull[] -q:: --quiet:: Operate quietly. @@ -79,3 +80,4 @@ option can be used to override --squash. -v:: --verbose:: Be verbose. +endif::git-pull[] diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 1686a54d22..c85a52c0cc 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -76,9 +76,9 @@ displayed in full, regardless of whether --abbrev or true parent commits, without taking grafts nor history simplification into account. -* 'format:' +* 'format:<string>' + -The 'format:' format allows you to specify which information +The 'format:<string>' format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with '%n' instead of '\n'. diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index aa96caeab2..d78e121c76 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -3,8 +3,9 @@ Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', - 'full', 'fuller', 'email', 'raw' and 'format:<string>'. - When omitted, the format defaults to 'medium'. + 'full', 'fuller', 'email', 'raw' and 'format:<string>'. See + the "PRETTY FORMATS" section for some additional details for each + format. When omitted, the format defaults to 'medium'. + Note: you can specify the default pretty format in the repository configuration (see linkgit:git-config[1]). @@ -30,9 +31,18 @@ people using 80-column terminals. defaults to UTF-8. --no-notes:: ---show-notes:: +--show-notes[=<ref>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when there is no `--pretty`, `--format` nor `--oneline` option is given on the command line. ++ +With an optional argument, add this ref to the list of notes. The ref +is taken to be in `refs/notes/` if it is not qualified. + +--[no-]standard-notes:: + Enable or disable populating the notes ref list from the + 'core.notesRef' and 'notes.displayRef' variables (or + corresponding environment overrides). Enabled by default. + See linkgit:git-config[1]. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 81c0e6f184..b9fb7a86bd 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -108,8 +108,8 @@ options may be given. See linkgit:git-diff-files[1] for more options. -c:: - This flag changes the way a merge commit is displayed. It shows - the differences from each of the parents to the merge result + With this option, diff output for a merge commit + shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time. Furthermore, it lists only files which were modified from all parents. @@ -121,6 +121,15 @@ options may be given. See linkgit:git-diff-files[1] for more options. the parents have only two variants and the merge result picks one of them without modification. +-m:: + + This flag makes the merge commits show the full diff like + regular commits; for each merge parent, a separate log entry + and diff is generated. An exception is that only diff against + the first parent is shown when '--first-parent' option is given; + in that case, the output represents the changes the merge + brought _into_ the then-current branch. + -r:: Show recursive diffs. diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 50f9e9ac17..312e3b2e2b 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -115,6 +115,9 @@ There are some macros to easily define options: `OPT__ABBREV(&int_var)`:: Add `\--abbrev[=<n>]`. +`OPT__COLOR(&int_var, description)`:: + Add `\--color[=<when>]` and `--no-color`. + `OPT__DRY_RUN(&int_var)`:: Add `-n, \--dry-run`. @@ -183,6 +186,15 @@ There are some macros to easily define options: arguments. Short options that happen to be digits take precedence over it. +`OPT_COLOR_FLAG(short, long, &int_var, description)`:: + Introduce an option that takes an optional argument that can + have one of three values: "always", "never", or "auto". If the + argument is not given, it defaults to "always". The `--no-` form + works like `--long=never`; it cannot take an argument. If + "always", set `int_var` to 1; if "never", set `int_var` to 0; if + "auto", set `int_var` to 1 if stdout is a tty or a pager, + 0 otherwise. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt index 293bb15d20..6d8c24bb1e 100644 --- a/Documentation/technical/api-string-list.txt +++ b/Documentation/technical/api-string-list.txt @@ -104,8 +104,12 @@ write `string_list_insert(...)->util = ...;`. `unsorted_string_list_has_string`:: It's like `string_list_has_string()` but for unsorted lists. + +`unsorted_string_list_lookup`:: + + It's like `string_list_lookup()` but for unsorted lists. + -This function needs to look through all items, as opposed to its +The above two functions need to look through all items, as opposed to their counterpart for sorted lists, which performs a binary search. Data structures diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index fd1a593149..b15517fa06 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -119,7 +119,7 @@ both. ofs-delta --------- -Server can send, and client understand PACKv2 with delta refering to +Server can send, and client understand PACKv2 with delta referring to its base by position in pack rather than by an obj-id. That is, they can send/read OBJ_OFS_DELTA (aka type 6) in a packfile. diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 459a394dc0..1dcd1e7f1e 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -1,44 +1,57 @@ GIT URLS[[URLS]] ---------------- -One of the following notations can be used -to name the remote repository: +In general, URLs contain information about the transport protocol, the +address of the remote server, and the path to the repository. +Depending on the transport protocol, some of this information may be +absent. + +Git natively supports ssh, git, http, https, ftp, ftps, and rsync +protocols. The following syntaxes may be used with them: -- rsync://host.xz/path/to/repo.git/ -- http://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- https://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- git://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- git://host.xz{startsb}:port{endsb}/~user/path/to/repo.git/ - ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/ -- ssh://{startsb}user@{endsb}host.xz/path/to/repo.git/ -- ssh://{startsb}user@{endsb}host.xz/~user/path/to/repo.git/ -- ssh://{startsb}user@{endsb}host.xz/~/path/to/repo.git +- git://host.xz{startsb}:port{endsb}/path/to/repo.git/ +- http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ +- ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ +- rsync://host.xz/path/to/repo.git/ -SSH is the default transport protocol over the network. You can -optionally specify which user to log-in as, and an alternate, -scp-like syntax is also supported. Both syntaxes support -username expansion, as does the native git protocol, but -only the former supports port specification. The following -three are identical to the last three above, respectively: +An alternative scp-like syntax may also be used with the ssh protocol: -- {startsb}user@{endsb}host.xz:/path/to/repo.git/ -- {startsb}user@{endsb}host.xz:~user/path/to/repo.git/ -- {startsb}user@{endsb}host.xz:path/to/repo.git +- {startsb}user@{endsb}host.xz:path/to/repo.git/ -To sync with a local directory, you can use: +The ssh and git protocols additionally support ~username expansion: + +- ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/ +- git://host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/ +- {startsb}user@{endsb}host.xz:/~{startsb}user{endsb}/path/to/repo.git/ + +For local respositories, also supported by git natively, the following +syntaxes may be used: - /path/to/repo.git/ - file:///path/to/repo.git/ ifndef::git-clone[] -They are mostly equivalent, except when cloning. See -linkgit:git-clone[1] for details. +These two syntaxes are mostly equivalent, except when cloning, when +the former implies --local option. See linkgit:git-clone[1] for +details. endif::git-clone[] ifdef::git-clone[] -They are equivalent, except the former implies --local option. +These two syntaxes are mostly equivalent, except the former implies +--local option. endif::git-clone[] +When git doesn't know how to handle a certain transport protocol, it +attempts to use the 'remote-<transport>' remote helper, if one +exists. To explicitly request a remote helper, the following syntax +may be used: + +- <transport>::<address> + +where <address> may be a path, a server and path, or an arbitrary +URL-like string recognized by the specific remote helper being +invoked. See linkgit:git-remote-helpers[1] for details. If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you |