diff options
Diffstat (limited to 'Documentation')
38 files changed, 559 insertions, 234 deletions
diff --git a/Documentation/RelNotes-1.7.0.7.txt b/Documentation/RelNotes-1.7.0.7.txt new file mode 100644 index 0000000000..d0cb7ca7e2 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.7.txt @@ -0,0 +1,16 @@ +Git v1.7.0.7 Release Notes +========================== + +Fixes since v1.7.0.6 +-------------------- + + * "make NO_CURL=NoThanks install" was broken. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.1.2.txt b/Documentation/RelNotes-1.7.1.2.txt index 46b6a960c7..61ba14e262 100644 --- a/Documentation/RelNotes-1.7.1.2.txt +++ b/Documentation/RelNotes-1.7.1.2.txt @@ -17,3 +17,12 @@ Fixes since v1.7.1.1 * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option when --keep-dashdash was in effect. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.2.1.txt b/Documentation/RelNotes-1.7.2.1.txt new file mode 100644 index 0000000000..1103c47a4f --- /dev/null +++ b/Documentation/RelNotes-1.7.2.1.txt @@ -0,0 +1,25 @@ +Git v1.7.2.1 Release Notes +========================== + +Fixes since v1.7.2 +------------------ + + * "git instaweb" wasn't useful when your Apache was installed under a + name other than apache2 (e.g. "httpd"). + + * Similarly, "git web--browse" (invoked by "git help -w") learned that + chrome browser is sometimes called google-chrome. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + + * Documentation on Cygwin failed to build. + + * The error message from "git pull blarg" when 'blarg' is an unknown + remote name has been improved. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.2.2.txt b/Documentation/RelNotes-1.7.2.2.txt new file mode 100644 index 0000000000..71eb6a8b0a --- /dev/null +++ b/Documentation/RelNotes-1.7.2.2.txt @@ -0,0 +1,22 @@ +Git v1.7.2.2 Release Notes +========================== + +Fixes since v1.7.2.1 +-------------------- + + * Object transfer over smart http transport deadlocked the client when + the remote HTTP server returned a failure, instead of erroring it out. + + * git-gui honors custom textconv filters when showing diff and blame; + + * git diff --relative=subdir (without the necessary trailing /) did not + work well; + + * "git diff-files -p --submodule" was recently broken; + + * "git checkout -b n ':/token'" did not work; + + * "git index-pack" (hence "git fetch/clone/pull/push") enabled the object + replacement machinery by mistake (it never should have); + +And other minor fixes and documentation updates. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index eb53e0636e..ece3c77482 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -7,17 +7,16 @@ Checklist (and a short version for the impatient): before committing - do not check in commented out code or unneeded files - the first line of the commit message should be a short - description and should skip the full stop + description (50 characters is the soft limit, see DISCUSSION + in git-commit(1)), and should skip the full stop - the body should provide a meaningful commit message, which: - uses the imperative, present tense: "change", not "changed" or "changes". - includes motivation for the change, and contrasts its implementation with previous behaviour - - if you want your work included in git.git, add a - "Signed-off-by: Your Name <you@example.com>" line to the - commit message (or just use the option "-s" when - committing) to confirm that you agree to the Developer's - Certificate of Origin + - add a "Signed-off-by: Your Name <you@example.com>" line to the + commit message (or just use the option "-s" when committing) + to confirm that you agree to the Developer's Certificate of Origin - make sure that you have tests for the bug you are fixing - make sure that the test suite passes after your commit diff --git a/Documentation/config.txt b/Documentation/config.txt index e75434b3ef..0b4011f76e 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -128,7 +128,7 @@ advice.*:: when writing commit messages. Default: true. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to - merge to avoid overwritting local changes. + merge to avoid overwriting local changes. Default: true. resolveConflict:: Advices shown by various commands when conflicts @@ -418,7 +418,7 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.deltaBaseCacheLimit:: Maximum number of bytes to reserve for caching base objects - that multiple deltafied objects reference. By storing the + that may be referenced by multiple deltified objects. By storing the entire decompressed base objects in a cache Git is able to avoid unpacking and decompressing frequently used base objects multiple times. @@ -563,7 +563,7 @@ not necessarily be the current directory. am.keepcr:: If true, git-am will call git-mailsplit for patches in mbox format with parameter '--keep-cr'. In this case git-mailsplit will - not remove `\r` from lines ending with `\r\n`. Can be overrriden + not remove `\r` from lines ending with `\r\n`. Can be overridden by giving '--no-keep-cr' from the command line. See linkgit:git-am[1], linkgit:git-mailsplit[1]. @@ -826,6 +826,11 @@ diff.renames:: will enable basic rename detection. If set to "copies" or "copy", it will detect copies, as well. +diff.ignoreSubmodules:: + Sets the default value of --ignore-submodules. Note that this + affects only 'git diff' Porcelain, and not lower level 'diff' + commands such as 'git diff-files'. + diff.suppressBlankEmpty:: A boolean to inhibit the standard behavior of printing a space before each empty output line. Defaults to false. @@ -1002,7 +1007,7 @@ gitcvs.usecrlfattr:: If true, the server will look up the end-of-line conversion attributes for files to determine the '-k' modes to use. If the attributes force git to treat a file as text, - the '-k' mode will be left blank so cvs clients will + the '-k' mode will be left blank so CVS clients will treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging the client might otherwise do. If the attributes do not allow @@ -1243,6 +1248,15 @@ http.noEPSV:: support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' environment variable. Default is false (curl will use EPSV). +http.useragent:: + The HTTP USER_AGENT string presented to an HTTP server. The default + value represents the version of the client git such as git/1.7.1. + This option allows you to override this value to a more common value + such as Mozilla/4.0. This may be necessary, for instance, if + connecting through a firewall that restricts HTTP connections to a set + of common USER_AGENT strings (but not including those like git/1.7.1). + Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. + i18n.commitEncoding:: Character encoding the commit messages are stored in; git itself does not care per se, but this information is necessary e.g. when @@ -1275,7 +1289,9 @@ instaweb.local:: be bound to the local IP (127.0.0.1). instaweb.modulepath:: - The module path for an apache httpd used by linkgit:git-instaweb[1]. + The default module path for linkgit:git-instaweb[1] to use + instead of /usr/lib/apache2/modules. Only used if httpd + is Apache. instaweb.port:: The port number to bind the gitweb httpd to. See @@ -1558,6 +1574,10 @@ receive.denyDeletes:: If set to true, git-receive-pack will deny a ref update that deletes the ref. Use this to prevent such a ref deletion via a push. +receive.denyDeleteCurrent:: + If set to true, git-receive-pack will deny a ref update that + deletes the currently checked out branch of a non-bare repository. + receive.denyCurrentBranch:: If set to true or "refuse", git-receive-pack will deny a ref update to the currently checked out branch of a non-bare repository. @@ -1743,6 +1763,19 @@ submodule.<name>.update:: URL and other values found in the `.gitmodules` file. See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. +submodule.<name>.ignore:: + Defines under what circumstances "git status" and the diff family show + a submodule as modified. When set to "all", it will never be considered + modified, "dirty" will ignore all changes to the submodules work tree and + takes only differences between the HEAD of the submodule and the commit + recorded in the superproject into account. "untracked" will additionally + let submodules with modified tracked files in their work tree show up. + Using "none" (the default when this option is not set) also shows + submodules that have untracked files in their work tree as changed. + This setting overrides any setting made in .gitmodules for this submodule, + both settings can be overriden on the command line by using the + "--ignore-submodules" option. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 2371262b10..4656a97e60 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -206,10 +206,29 @@ endif::git-format-patch[] the diff-patch output format. Non default number of digits can be specified with `--abbrev=<n>`. --B:: - Break complete rewrite changes into pairs of delete and create. - --M:: +-B[<n>][/<m>]:: + Break complete rewrite changes into pairs of delete and + create. This serves two purposes: ++ +It affects the way a change that amounts to a total rewrite of a file +not as a series of deletion and insertion mixed together with a very +few lines that happen to match textually as the context, but as a +single deletion of everything old followed by a single insertion of +everything new, and the number `m` controls this aspect of the -B +option (defaults to 60%). `-B/70%` specifies that less than 30% of the +original should remain in the result for git to consider it a total +rewrite (i.e. otherwise the resulting patch will be a series of +deletion and insertion mixed together with context lines). ++ +When used with -M, a totally-rewritten file is also considered as the +source of a rename (usually -M only considers a file that disappeared +as the source of a rename), and the number `n` controls this aspect of +the -B option (defaults to 50%). `-B20%` specifies that a change with +addition and deletion compared to 20% or more of the file's size are +eligible for being picked up as a possible source of a rename to +another file. + +-M[<n>]:: ifndef::git-log[] Detect renames. endif::git-log[] @@ -218,9 +237,15 @@ ifdef::git-log[] For following files across renames while traversing history, see `--follow`. endif::git-log[] + If `n` is specified, it is a is a threshold on the similarity + index (i.e. amount of addition/deletions compared to the + file's size). For example, `-M90%` means git should consider a + delete/add pair to be a rename if more than 90% of the file + hasn't changed. --C:: +-C[<n>]:: Detect copies as well as renames. See also `--find-copies-harder`. + If `n` is specified, it has the same meaning as for `-M<n>`. ifndef::git-format-patch[] --diff-filter=[ACDMRTUXB*]:: @@ -330,7 +355,11 @@ endif::git-format-patch[] --ignore-submodules[=<when>]:: Ignore changes to submodules in the diff generation. <when> can be - either "untracked", "dirty" or "all", which is the default. When + either "none", "untracked", "dirty" or "all", which is the default + Using "none" will consider the submodule modified when it either contains + untracked or modified files or its HEAD differs from the commit recorded + in the superproject and can be used to override any settings of the + 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When "untracked" is used submodules are not considered dirty when they only contain untracked content (but they are still scanned for modified content). Using "dirty" ignores all changes to the work tree of submodules, diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 8463439ac5..4a74b23d40 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -26,6 +26,10 @@ with the `--cache` option the patch is only applied to the index. Without these options, the command applies the patch only to files, and does not require them to be in a git repository. +This command applies the patch but does not create a commit. Use +linkgit:git-am[1] to create commits from patches generated by +linkgit:git-format-patch[1] and/or received by email. + OPTIONS ------- <patch>...:: @@ -242,6 +246,12 @@ If `--index` is not specified, then the submodule commits in the patch are ignored and only the absence or presence of the corresponding subdirectory is checked and (if possible) updated. + +SEE ALSO +-------- +linkgit:git-am[1]. + + Author ------ Written by Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index 86b3015c13..efbe3790bb 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -971,7 +971,7 @@ logical change in each commit. The smaller the changes in your commit, the most effective "git bisect" will be. And you will probably need "git bisect" less in the first place, as small changes are easier to review even if they are -only reviewed by the commiter. +only reviewed by the committer. Another good idea is to have good commit messages. They can be very helpful to understand why some changes were made. diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 1bacd2e104..66e570113a 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] -'git checkout' [-q] [-f] [-m] [[-b|--orphan] <new_branch>] [<start_point>] +'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... 'git checkout' --patch [<tree-ish>] [--] [<paths>...] @@ -21,7 +21,7 @@ also update `HEAD` to set the specified branch as the current branch. 'git checkout' [<branch>]:: -'git checkout' -b <new branch> [<start point>]:: +'git checkout' -b|-B <new_branch> [<start point>]:: This form switches branches by updating the index, working tree, and HEAD to reflect the specified branch. @@ -31,6 +31,17 @@ were called and then checked out; in this case you can use the `--track` or `--no-track` options, which will be passed to 'git branch'. As a convenience, `--track` without `-b` implies branch creation; see the description of `--track` below. ++ +If `-B` is given, <new_branch> is created if it doesn't exist; otherwise, it +is reset. This is the transactional equivalent of ++ +------------ +$ git branch -f <branch> [<start point>] +$ git checkout <branch> +------------ ++ +that is to say, the branch is not reset/created unless "git checkout" is +successful. 'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: @@ -75,6 +86,12 @@ entries; instead, unmerged entries are ignored. Create a new branch named <new_branch> and start it at <start_point>; see linkgit:git-branch[1] for details. +-B:: + Creates the branch <new_branch> and start it at <start_point>; + if it already exists, then reset it to <start_point>. This is + equivalent to running "git branch" with "-f"; see + linkgit:git-branch[1] for details. + -t:: --track:: When creating a new branch, set up "upstream" configuration. See diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index a81cb6c280..60e38e6e27 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -8,7 +8,7 @@ git-clean - Remove untracked files from the working tree SYNOPSIS -------- [verse] -'git clean' [-d] [-f] [-n] [-q] [-x | -X] [--] <path>... +'git clean' [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <path>... DESCRIPTION ----------- @@ -45,6 +45,12 @@ OPTIONS Be quiet, only report errors, but not the files that are successfully removed. +-e <pattern>:: +--exclude=<pattern>:: + Specify special exceptions to not be cleaned. Each <pattern> is + the same form as in $GIT_DIR/info/excludes and this option can be + given multiple times. + -x:: Don't use the ignore rules. This allows removing all untracked files, including build products. This can be used (possibly in diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index c28603ecf5..42fb1f57b2 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -130,11 +130,11 @@ OPTIONS Usually recording a commit that has the exact same tree as its sole parent commit is a mistake, and the command prevents you from making such a commit. This option bypasses the safety, and - is primarily for use by foreign scm interface scripts. + is primarily for use by foreign SCM interface scripts. --allow-empty-message:: Like --allow-empty this command is primarily for use by foreign - scm interface scripts. It allows you to create a commit with an + SCM interface scripts. It allows you to create a commit with an empty commit message without using plumbing commands like linkgit:git-commit-tree[1]. diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 8bcd875a67..608cd63fc3 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -188,7 +188,7 @@ ISSUES ------ Problems related to timestamps: - * If timestamps of commits in the cvs repository are not stable enough + * If timestamps of commits in the CVS repository are not stable enough to be used for ordering commits changes may show up in the wrong order. * If any files were ever "cvs import"ed more than once (e.g., import of @@ -201,7 +201,7 @@ Problems related to branches: * Branches on which no commits have been made are not imported. * All files from the branching point are added to a branch even if - never added in cvs. + never added in CVS. * This applies to files added to the source branch *after* a daughter branch was created: if previously no commit was made on the daughter branch they will erroneously be added to the daughter branch in git. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 7004dd2dec..f4472c61db 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -366,8 +366,8 @@ CRLF Line Ending Conversions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ By default the server leaves the '-k' mode blank for all files, -which causes the cvs client to treat them as a text files, subject -to crlf conversion on some platforms. +which causes the CVS client to treat them as a text files, subject +to end-of-line conversion on some platforms. You can make the server use the end-of-line conversion attributes to set the '-k' modes for files by setting the `gitcvs.usecrlfattr` diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 77a0a2481a..966ba4f213 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -482,9 +482,11 @@ External data format:: 'M' SP <mode> SP <dataref> SP <path> LF .... + -Here `<dataref>` can be either a mark reference (`:<idnum>`) +Here usually `<dataref>` must be either a mark reference (`:<idnum>`) set by a prior `blob` command, or a full 40-byte SHA-1 of an -existing Git blob object. +existing Git blob object. If `<mode>` is `040000`` then +`<dataref>` must be the full 40-byte SHA-1 of an existing +Git tree object or a mark reference set with `--import-marks`. Inline data format:: The data content for the file has not been supplied yet. @@ -509,6 +511,8 @@ in octal. Git only supports the following modes: * `160000`: A gitlink, SHA-1 of the object refers to a commit in another repository. Git links can only be specified by SHA or through a commit mark. They are used to implement submodules. +* `040000`: A subdirectory. Subdirectories can only be specified by + SHA or through a tree mark set with `--import-marks`. In both formats `<path>` is the complete path of the file to be added (if not already existing) or modified (if already existing). diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 6904739a48..51edeecbe5 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -49,7 +49,7 @@ OPTIONS --no-filters:: Hash the contents as is, ignoring any input filter that would - have been chosen by the attributes mechanism, including crlf + have been chosen by the attributes mechanism, including the end-of-line conversion. If the file is read from standard input then this is always implied, unless the --path option is given. diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 2c3c4d2994..e70cea9320 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -49,15 +49,18 @@ OPTIONS linkgit:git-web--browse[1] for more information about this. If the script fails, the URL will be printed to stdout. +start:: --start:: Start the httpd instance and exit. This does not generate any of the configuration files for spawning a new instance. +stop:: --stop:: Stop the httpd instance and exit. This does not generate any of the configuration files for spawning a new instance, nor does it close the browser. +restart:: --restart:: Restart the httpd instance and exit. This does not generate any of the configuration files for spawning a new instance. diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index e970664fe1..c213bdbdc5 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -55,6 +55,9 @@ OPTIONS paths. With this, the full diff is shown for commits that touch the specified paths; this means that "<path>..." limits only commits, and doesn't limit diff for those commits. ++ +Note that this affects all diff-based output types, e.g. those +produced by --stat etc. --log-size:: Before the log message print out its size in bytes. Intended diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 3521637b58..a7c8174d01 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -106,8 +106,16 @@ OPTIONS with `-s` or `-u` options does not make any sense. -t:: - Identify the file status with the following tags (followed by - a space) at the start of each line: + This feature is semi-deprecated. For scripting purpose, + linkgit:git-status[1] `--porcelain` and + linkgit:git-diff-files[1] `--name-status` are almost always + superior alternatives, and users should look at + linkgit:git-status[1] `--short` or linkgit:git-diff[1] + `--name-status` for more user-friendly alternatives. ++ +This option identifies the file status with the following tags (followed by +a space) at the start of each line: + H:: cached S:: skip-worktree M:: unmerged @@ -132,6 +140,12 @@ OPTIONS lines, show only a partial prefix. Non default number of digits can be specified with --abbrev=<n>. +--debug:: + After each line that describes a file, add more data about its + cache entry. This is intended to show as much information as + possible for manual inspection; the exact format may change at + any time. + \--:: Do not interpret any more arguments as options. diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 5540af5d16..2981d8c5ef 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -129,10 +129,12 @@ OPTIONS is taken to be in `refs/notes/` if it is not qualified. -n:: +--dry-run:: Do not remove anything; just report the object names whose notes would be removed. -v:: +--verbose:: Report all object names whose notes are removed. diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index 15cfb7a8dc..4d673a5686 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -31,10 +31,12 @@ OPTIONS ------- -n:: +--dry-run:: Do not remove anything; just report what it would remove. -v:: +--verbose:: Report all removed objects. \--:: diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index ab4de10358..c50f7dcb89 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -8,29 +8,72 @@ git-pull - Fetch from and merge with another repository or a local branch SYNOPSIS -------- -'git pull' <options> <repository> <refspec>... +'git pull' [options] [<repository> [<refspec>...]] DESCRIPTION ----------- -Runs 'git fetch' with the given parameters, and calls 'git merge' -to merge the retrieved head(s) into the current branch. -With `--rebase`, calls 'git rebase' instead of 'git merge'. -Note that you can use `.` (current directory) as the -<repository> to pull from the local repository -- this is useful -when merging local branches into the current branch. +Incorporates changes from a remote repository into the current +branch. In its default mode, `git pull` is shorthand for +`git fetch` followed by `git merge FETCH_HEAD`. -Also note that options meant for 'git pull' itself and underlying -'git merge' must be given before the options meant for 'git fetch'. +More precisely, 'git pull' runs 'git fetch' with the given +parameters and calls 'git merge' to merge the retrieved branch +heads into the current branch. +With `--rebase`, it runs 'git rebase' instead of 'git merge'. -*Warning*: Running 'git pull' (actually, the underlying 'git merge') +<repository> should be the name of a remote repository as +passed to linkgit:git-fetch[1]. <refspec> can name an +arbitrary remote ref (for example, the name of a tag) or even +a collection of refs with corresponding remote tracking branches +(e.g., refs/heads/*:refs/remotes/origin/*), but usually it is +the name of a branch in the remote repository. + +Default values for <repository> and <branch> are read from the +"remote" and "merge" configuration for the current branch +as set by linkgit:git-branch[1] `--track`. + +Assume the following history exists and the current branch is +"`master`": + +------------ + A---B---C master on origin + / + D---E---F---G master +------------ + +Then "`git pull`" will fetch and replay the changes from the remote +`master` branch since it diverged from the local `master` (i.e., `E`) +until its current commit (`C`) on top of `master` and record the +result in a new commit along with the names of the two parent commits +and a log message from the user describing the changes. + +------------ + A---B---C remotes/origin/master + / \ + D---E---F---G---H master +------------ + +See linkgit:git-merge[1] for details, including how conflicts +are presented and handled. + +In git 1.7.0 or later, to cancel a conflicting merge, use +`git reset --merge`. *Warning*: In older versions of git, running 'git pull' with uncommitted changes is discouraged: while possible, it leaves you -in a state that is hard to back out of in the case of a conflict. +in a state that may be hard to back out of in the case of a conflict. + +If any of the remote changes overlap with local uncommitted changes, +the merge will be automatically cancelled and the work tree untouched. +It is generally best to get any local changes in working order before +pulling or stash them away with linkgit:git-stash[1]. OPTIONS ------- +Options meant for 'git pull' itself and the underlying 'git merge' +must be given before the options meant for 'git fetch'. + -q:: --quiet:: This is passed to both underlying git-fetch to squelch reporting of diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index b68abff28a..658ff2ff67 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -200,16 +200,29 @@ summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast-forward updates). For a - failed update, more details are given for the failure. - The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast-forward). The - string `remote rejected` indicates that the remote end refused - the update; this rejection is typically caused by a hook on the - remote side. The string `remote failure` indicates that the - remote end did not report the successful update of the ref - (perhaps because of a temporary error on the remote side, a - break in the network connection, or other transient error). + `<old>...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- from:: The name of the local ref being pushed, minus its diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index f6037c4f6a..2e78da448f 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -412,6 +412,13 @@ turn `core.sparseCheckout` on in order to have sparse checkout support. +BUGS +---- +In order to match a directory with $GIT_DIR/info/sparse-checkout, +trailing slash must be used. The form without trailing slash, while +works with .gitignore, does not work with sparse checkout. + + SEE ALSO -------- linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index be23ad2359..b4314568f5 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -250,6 +250,13 @@ on top of the <upstream> branch using the given strategy, using the 'ours' strategy simply discards all patches from the <branch>, which makes little sense. +-X <strategy-option>:: +--strategy-option=<strategy-option>:: + Pass the <strategy-option> through to the merge strategy. + This implies `\--merge` and, if no strategy has been + specified, `-s recursive`. Note the reversal of 'ours' and + 'theirs' as noted in above for the `-m` option. + -q:: --quiet:: Be quiet. Implies --no-stat. diff --git a/Documentation/git-request-pull.txt b/Documentation/git-request-pull.txt index 19335fddae..400f61f6e2 100644 --- a/Documentation/git-request-pull.txt +++ b/Documentation/git-request-pull.txt @@ -7,7 +7,7 @@ git-request-pull - Generates a summary of pending changes SYNOPSIS -------- -'git request-pull' <start> <url> [<end>] +'git request-pull' [-p] <start> <url> [<end>] DESCRIPTION ----------- @@ -17,6 +17,9 @@ the given URL in the generated summary. OPTIONS ------- +-p:: + Show patch text + <start>:: Commit to start at. diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 645f0c1748..9cf31485fe 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -8,40 +8,50 @@ git-reset - Reset current HEAD to the specified state SYNOPSIS -------- [verse] -'git reset' [--mixed | --soft | --hard | --merge | --keep] [-q] [<commit>] 'git reset' [-q] [<commit>] [--] <paths>... 'git reset' --patch [<commit>] [--] [<paths>...] +'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>] DESCRIPTION ----------- -Sets the current head to the specified commit and optionally resets the -index and working tree to match. - -This command is useful if you notice some small error in a recent -commit (or set of commits) and want to redo that part without showing -the undo in the history. - -If you want to undo a commit other than the latest on a branch, -linkgit:git-revert[1] is your friend. - -The second and third forms with 'paths' and/or --patch are used to -revert selected paths in the index from a given commit, without moving -HEAD. - +In the first and second form, copy entries from <commit> to the index. +In the third form, set the current branch to <commit>, optionally +modifying index and worktree to match. The <commit> defaults to HEAD +in all forms. + +'git reset' [-q] [<commit>] [--] <paths>...:: + This form resets the index entries for all <paths> to their + state at the <commit>. (It does not affect the worktree, nor + the current branch.) ++ +This means that `git reset <paths>` is the opposite of `git add +<paths>`. -OPTIONS -------- ---mixed:: - Resets the index but not the working tree (i.e., the changed files - are preserved but not marked for commit) and reports what has not - been updated. This is the default action. +'git reset' --patch|-p [<commit>] [--] [<paths>...]:: + Interactively select hunks in the difference between the index + and <commit> (defaults to HEAD). The chosen hunks are applied + in reverse to the index. ++ +This means that `git reset -p` is the opposite of `git add -p` (see +linkgit:git-add[1]). +'git reset' [--<mode>] [<commit>]:: + This form points the current branch to <commit> and then + updates index and working tree according to <mode>, which must + be one of the following: ++ +-- --soft:: Does not touch the index file nor the working tree at all, but requires them to be in a good order. This leaves all your changed files "Changes to be committed", as 'git status' would put it. +--mixed:: + Resets the index but not the working tree (i.e., the changed files + are preserved but not marked for commit) and reports what has not + been updated. This is the default action. + --hard:: Matches the working tree and index to that of the tree being switched to. Any changes to tracked files in the working tree @@ -59,132 +69,46 @@ OPTIONS the given commit. If a file that is different between the current commit and the given commit has local changes, reset is aborted. +-- --p:: ---patch:: - Interactively select hunks in the difference between the index - and <commit> (defaults to HEAD). The chosen hunks are applied - in reverse to the index. -+ -This means that `git reset -p` is the opposite of `git add -p` (see -linkgit:git-add[1]). +If you want to undo a commit other than the latest on a branch, +linkgit:git-revert[1] is your friend. + + +OPTIONS +------- -q:: --quiet:: Be quiet, only report errors. -<commit>:: - Commit to make the current HEAD. If not given defaults to HEAD. - -DISCUSSION ----------- -The tables below show what happens when running: - ----------- -git reset --option target ----------- - -to reset the HEAD to another commit (`target`) with the different -reset options depending on the state of the files. - -In these tables, A, B, C and D are some different states of a -file. For example, the first line of the first table means that if a -file is in state A in the working tree, in state B in the index, in -state C in HEAD and in state D in the target, then "git reset --soft -target" will put the file in state A in the working tree, in state B -in the index and in state D in HEAD. - - working index HEAD target working index HEAD - ---------------------------------------------------- - A B C D --soft A B D - --mixed A D D - --hard D D D - --merge (disallowed) - --keep (disallowed) - - working index HEAD target working index HEAD - ---------------------------------------------------- - A B C C --soft A B C - --mixed A C C - --hard C C C - --merge (disallowed) - --keep A C C - - working index HEAD target working index HEAD - ---------------------------------------------------- - B B C D --soft B B D - --mixed B D D - --hard D D D - --merge D D D - --keep (disallowed) - - working index HEAD target working index HEAD - ---------------------------------------------------- - B B C C --soft B B C - --mixed B C C - --hard C C C - --merge C C C - --keep B C C - - working index HEAD target working index HEAD - ---------------------------------------------------- - B C C D --soft B C D - --mixed B D D - --hard D D D - --merge (disallowed) - --keep (disallowed) - - working index HEAD target working index HEAD - ---------------------------------------------------- - B C C C --soft B C C - --mixed B C C - --hard C C C - --merge B C C - --keep B C C - -"reset --merge" is meant to be used when resetting out of a conflicted -merge. Any mergy operation guarantees that the work tree file that is -involved in the merge does not have local change wrt the index before -it starts, and that it writes the result out to the work tree. So if -we see some difference between the index and the target and also -between the index and the work tree, then it means that we are not -resetting out from a state that a mergy operation left after failing -with a conflict. That is why we disallow --merge option in this case. - -"reset --keep" is meant to be used when removing some of the last -commits in the current branch while keeping changes in the working -tree. If there could be conflicts between the changes in the commit we -want to remove and the changes in the working tree we want to keep, -the reset is disallowed. That's why it is disallowed if there are both -changes between the working tree and HEAD, and between HEAD and the -target. To be safe, it is also disallowed when there are unmerged -entries. - -The following tables show what happens when there are unmerged -entries: - - working index HEAD target working index HEAD - ---------------------------------------------------- - X U A B --soft (disallowed) - --mixed X B B - --hard B B B - --merge B B B - --keep (disallowed) - - working index HEAD target working index HEAD - ---------------------------------------------------- - X U A A --soft (disallowed) - --mixed X A A - --hard A A A - --merge A A A - --keep (disallowed) - -X means any state and U means an unmerged index. - -Examples +EXAMPLES -------- +Undo add:: ++ +------------ +$ edit <1> +$ git add frotz.c filfre.c +$ mailx <2> +$ git reset <3> +$ git pull git://info.example.com/ nitfol <4> +------------ ++ +<1> You are happily working on something, and find the changes +in these files are in good order. You do not want to see them +when you run "git diff", because you plan to work on other files +and changes with these files are distracting. +<2> Somebody asks you to pull, and the changes sounds worthy of merging. +<3> However, you already dirtied the index (i.e. your index does +not match the HEAD commit). But you know the pull you are going +to make does not affect frotz.c nor filfre.c, so you revert the +index changes for these two files. Your changes in working tree +remain there. +<4> Then you can pull and merge, leaving frotz.c and filfre.c +changes still in the working tree. + Undo a commit and redo:: + ------------ @@ -204,19 +128,6 @@ edit the message further, you can give -C option instead. + See also the --amend option to linkgit:git-commit[1]. -Undo commits permanently:: -+ ------------- -$ git commit ... -$ git reset --hard HEAD~3 <1> ------------- -+ -<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad -and you do not want to ever see them again. Do *not* do this if -you have already given these commits to somebody else. (See the -"RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] for -the implications of doing so.) - Undo a commit, making it a topic branch:: + ------------ @@ -232,28 +143,18 @@ current HEAD. <2> Rewind the master branch to get rid of those three commits. <3> Switch to "topic/wip" branch and keep working. -Undo add:: +Undo commits permanently:: + ------------ -$ edit <1> -$ git add frotz.c filfre.c -$ mailx <2> -$ git reset <3> -$ git pull git://info.example.com/ nitfol <4> +$ git commit ... +$ git reset --hard HEAD~3 <1> ------------ + -<1> You are happily working on something, and find the changes -in these files are in good order. You do not want to see them -when you run "git diff", because you plan to work on other files -and changes with these files are distracting. -<2> Somebody asks you to pull, and the changes sounds worthy of merging. -<3> However, you already dirtied the index (i.e. your index does -not match the HEAD commit). But you know the pull you are going -to make does not affect frotz.c nor filfre.c, so you revert the -index changes for these two files. Your changes in working tree -remain there. -<4> Then you can pull and merge, leaving frotz.c and filfre.c -changes still in the working tree. +<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad +and you do not want to ever see them again. Do *not* do this if +you have already given these commits to somebody else. (See the +"RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] for +the implications of doing so.) Undo a merge or pull:: + @@ -355,7 +256,7 @@ Keep changes in working tree while discarding some previous commits:: Suppose you are working on something and you commit it, and then you continue working a bit more, but now you think that what you have in your working tree should be in another branch that has nothing to do -with what you commited previously. You can start a new branch and +with what you committed previously. You can start a new branch and reset it while keeping the changes in your work tree. + ------------ @@ -376,6 +277,114 @@ $ git reset --keep start <3> <3> But you can use "reset --keep" to remove the unwanted commit after you switched to "branch2". + +DISCUSSION +---------- + +The tables below show what happens when running: + +---------- +git reset --option target +---------- + +to reset the HEAD to another commit (`target`) with the different +reset options depending on the state of the files. + +In these tables, A, B, C and D are some different states of a +file. For example, the first line of the first table means that if a +file is in state A in the working tree, in state B in the index, in +state C in HEAD and in state D in the target, then "git reset --soft +target" will put the file in state A in the working tree, in state B +in the index and in state D in HEAD. + + working index HEAD target working index HEAD + ---------------------------------------------------- + A B C D --soft A B D + --mixed A D D + --hard D D D + --merge (disallowed) + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + A B C C --soft A B C + --mixed A C C + --hard C C C + --merge (disallowed) + --keep A C C + + working index HEAD target working index HEAD + ---------------------------------------------------- + B B C D --soft B B D + --mixed B D D + --hard D D D + --merge D D D + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + B B C C --soft B B C + --mixed B C C + --hard C C C + --merge C C C + --keep B C C + + working index HEAD target working index HEAD + ---------------------------------------------------- + B C C D --soft B C D + --mixed B D D + --hard D D D + --merge (disallowed) + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + B C C C --soft B C C + --mixed B C C + --hard C C C + --merge B C C + --keep B C C + +"reset --merge" is meant to be used when resetting out of a conflicted +merge. Any mergy operation guarantees that the work tree file that is +involved in the merge does not have local change wrt the index before +it starts, and that it writes the result out to the work tree. So if +we see some difference between the index and the target and also +between the index and the work tree, then it means that we are not +resetting out from a state that a mergy operation left after failing +with a conflict. That is why we disallow --merge option in this case. + +"reset --keep" is meant to be used when removing some of the last +commits in the current branch while keeping changes in the working +tree. If there could be conflicts between the changes in the commit we +want to remove and the changes in the working tree we want to keep, +the reset is disallowed. That's why it is disallowed if there are both +changes between the working tree and HEAD, and between HEAD and the +target. To be safe, it is also disallowed when there are unmerged +entries. + +The following tables show what happens when there are unmerged +entries: + + working index HEAD target working index HEAD + ---------------------------------------------------- + X U A B --soft (disallowed) + --mixed X B B + --hard B B B + --merge B B B + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + X U A A --soft (disallowed) + --mixed X A A + --hard A A A + --merge A A A + --keep (disallowed) + +X means any state and U means an unmerged index. + + Author ------ Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 0727f431c6..be4c053360 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -184,10 +184,13 @@ scripts the same facilities C builtins have. It works as an option normalizer (e.g. splits single switches aggregate values), a bit like `getopt(1)` does. It takes on the standard input the specification of the options to parse and -understand, and echoes on the standard output a line suitable for `sh(1)` `eval` +understand, and echoes on the standard output a string suitable for `sh(1)` `eval` to replace the arguments with normalized ones. In case of error, it outputs usage on the standard error stream, and exits with code 129. +Note: Make sure you quote the result when passing it to `eval`. See +below for an example. + Input Format ~~~~~~~~~~~~ @@ -244,7 +247,7 @@ bar= some cool option --bar with an argument An option group Header C? option C with an optional argument" -eval `echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?` +eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)" ------------ SQ-QUOTE diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 3f9d9c6db3..75780d7d63 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -163,9 +163,15 @@ flag, so you can do to get a listing of all tags together with what they dereference. +FILES +----- +`.git/refs/*`, `.git/packed-refs` + SEE ALSO -------- -linkgit:git-ls-remote[1] +linkgit:git-ls-remote[1], +linkgit:git-update-ref[1], +linkgit:gitrepository-layout[5] AUTHORS ------- diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 2fd054c104..dae190a5f2 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -55,7 +55,11 @@ specified. --ignore-submodules[=<when>]:: Ignore changes to submodules when looking for changes. <when> can be - either "untracked", "dirty" or "all", which is the default. When + either "none", "untracked", "dirty" or "all", which is the default. + Using "none" will consider the submodule modified when it either contains + untracked or modified files or its HEAD differs from the commit recorded + in the superproject and can be used to override any settings of the + 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When "untracked" is used submodules are not considered dirty when they only contain untracked content (but they are still scanned for modified content). Using "dirty" ignores all changes to the work tree of submodules, diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index b09bd9761f..4b84d08fc8 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -646,6 +646,12 @@ svn.brokenSymlinkWorkaround:: revision fetched. If unset, 'git svn' assumes this option to be "true". +svn.pathnameencoding:: + This instructs git svn to recode pathnames to a given encoding. + It can be used by windows users and by those who work in non-utf8 + locales to avoid corrupted file names with non-ASCII characters. + Valid encodings are the ones supported by Perl's Encode module. + Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps options all affect the metadata generated and used by 'git svn'; they *must* be set in the configuration file before any history is imported diff --git a/Documentation/git.txt b/Documentation/git.txt index 27ece58857..531789321c 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,20 +44,24 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.2/git.html[documentation for release 1.7.2] +* link:v1.7.2.2/git.html[documentation for release 1.7.2.2] * release notes for + link:RelNotes-1.7.2.2.txt[1.7.2.2], + link:RelNotes-1.7.2.1.txt[1.7.2.1], link:RelNotes-1.7.2.txt[1.7.2]. -* link:v1.7.1.1/git.html[documentation for release 1.7.1.1] +* link:v1.7.1.2/git.html[documentation for release 1.7.1.2] * release notes for + link:RelNotes-1.7.1.2.txt[1.7.1.2], link:RelNotes-1.7.1.1.txt[1.7.1.1], link:RelNotes-1.7.1.txt[1.7.1]. -* link:v1.7.0.6/git.html[documentation for release 1.7.0.6] +* link:v1.7.0.7/git.html[documentation for release 1.7.0.7] * release notes for + link:RelNotes-1.7.0.7.txt[1.7.0.7], link:RelNotes-1.7.0.6.txt[1.7.0.6], link:RelNotes-1.7.0.5.txt[1.7.0.5], link:RelNotes-1.7.0.4.txt[1.7.0.4], @@ -724,6 +728,13 @@ The documentation for git suite was started by David Greaves <david@dgreaves.com>, and later enhanced greatly by the contributors on the git-list <git@vger.kernel.org>. +Reporting Bugs +-------------- + +Report bugs to the Git mailing list <git@vger.kernel.org> where the +development and maintenance is primarily done. You do not have to be +subscribed to the list to send a message there. + SEE ALSO -------- linkgit:gittutorial[7], linkgit:gittutorial-2[7], diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 564586b943..2e2370ccdb 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -441,6 +441,8 @@ patterns are available: - `cpp` suitable for source code in the C and C++ languages. +- `csharp` suitable for source code in the C# language. + - `html` suitable for HTML/XHTML documents. - `java` suitable for source code in the Java language. diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 72a13d18e0..8ae107da25 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -44,6 +44,21 @@ submodule.<name>.update:: This config option is overridden if 'git submodule update' is given the '--merge' or '--rebase' options. +submodule.<name>.ignore:: + Defines under what circumstances "git status" and the diff family show + a submodule as modified. When set to "all", it will never be considered + modified, "dirty" will ignore all changes to the submodules work tree and + takes only differences between the HEAD of the submodule and the commit + recorded in the superproject into account. "untracked" will additionally + let submodules with modified tracked files in their work tree show up. + Using "none" (the default when this option is not set) also shows + submodules that have untracked files in their work tree as changed. + If this option is also present in the submodules entry in .git/config of + the superproject, the setting there will override the one found in + .gitmodules. + Both settings can be overriden on the command line by using the + "--ignore-submodule" option. + EXAMPLES -------- diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index 3cd32d6803..eb3d040783 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -16,7 +16,7 @@ You may find these things in your git repository (`.git` directory for a repository associated with your working tree, or `<project>.git` directory for a public 'bare' repository. It is also possible to have a working tree where `.git` is a plain -ascii file containing `gitdir: <path>`, i.e. the path to the +ASCII file containing `gitdir: <path>`, i.e. the path to the real git repository). objects:: diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index d78e121c76..9b6f3899ec 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -1,5 +1,5 @@ --pretty[='<format>']:: ---format[='<format>']:: +--format='<format>':: Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', diff --git a/Documentation/technical/api-tree-walking.txt b/Documentation/technical/api-tree-walking.txt index 55b728632c..14af37c3f1 100644 --- a/Documentation/technical/api-tree-walking.txt +++ b/Documentation/technical/api-tree-walking.txt @@ -42,6 +42,8 @@ information. * `data` can be anything the `fn` callback would want to use. +* `show_all_errors` tells whether to stop at the first error or not. + Initializing ------------ diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 1dcd1e7f1e..289019478d 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -25,7 +25,7 @@ The ssh and git protocols additionally support ~username expansion: - git://host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/ - {startsb}user@{endsb}host.xz:/~{startsb}user{endsb}/path/to/repo.git/ -For local respositories, also supported by git natively, the following +For local repositories, also supported by git natively, the following syntaxes may be used: - /path/to/repo.git/ |