diff options
Diffstat (limited to 'Documentation')
150 files changed, 679 insertions, 1372 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index ba2006d892..fe1c1e5bc2 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -152,7 +152,7 @@ Writing Documentation: when writing or modifying command usage strings and synopsis sections in the manual pages: - Placeholders are enclosed in angle brackets: + Placeholders are spelled in lowercase and enclosed in angle brackets: <file> --sort=<key> --abbrev[=<n>] diff --git a/Documentation/RelNotes/1.7.4.2.txt b/Documentation/RelNotes/1.7.4.2.txt new file mode 100644 index 0000000000..afb387161b --- /dev/null +++ b/Documentation/RelNotes/1.7.4.2.txt @@ -0,0 +1,42 @@ +Git v1.7.4.2 Release Notes +========================== + +Fixes since v1.7.4.1 +-------------------- + + * Many documentation updates to match "git cmd -h" output and the + git-cmd manual page. + + * "git clone /no/such/path" did not fail correctly. + + * "git commit" did not correctly error out when the user asked to use a + non existent file as the commit message template. + + * "git diff --stat -B" ran on binary files counted the changes in lines, + which was nonsensical. + + * "git diff -M" opportunistically detected copies, which was not + necessarily a good thing, especially when it is internally run by + recursive merge. + + * "git difftool" didn't tell (g)vimdiff that the files it is reading are + to be opened read-only. + + * "git merge" didn't pay attention to prepare-commit-msg hook, even + though if a merge is conflicted and manually resolved, the subsequent + "git commit" would have triggered the hook, which was inconsistent. + + * "git patch-id" (and commands like "format-patch --ignore-in-upstream" + that use it as their internal logic) handled changes to files that end + with incomplete lines incorrectly. + + * The official value to tell "git push" to push the current branch back + to update the upstream branch it forked from is now called "upstream". + The old name "tracking" is and will be supported. + + * gitweb's "highlight" interface mishandled tabs. + + * gitweb had a few forward-incompatible syntactic constructs and + also used incorrect variable when showing the file mode in a diff. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.txt b/Documentation/RelNotes/1.7.5.txt new file mode 100644 index 0000000000..bb0eb40af4 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.txt @@ -0,0 +1,97 @@ +Git v1.7.5 Release Notes (draft) +======================== + +Updates since v1.7.4 +-------------------- + + * Various MinGW portability fixes. + + * Various git-p4 enhancements (in contrib). + + * Various vcs-svn enhancements. + + * Update to more modern HP-UX port. + + * "git apply -v" reports offset lines when the patch does not apply at + the exact location recorded in the diff output. + + * "git branch --track" (and "git checkout --track --branch") used to + allow setting up a random non-branch that does not make sense to follow + as the "upstream". The command correctly diagnoses it as an error. + + * "git config" used to be also known as "git repo-config", but the old + name is now officially deprecated. + + * "git checkout --detach <commit>" is a more user friendly synonym for + "git checkout <commit>^0". + + * "git checkout" performed on detached HEAD gives a warning and + advice when the commit being left behind will become unreachable from + any branch or tag. + + * "git cherry-pick" and "git revert" can be told to use a custom merge + strategy, similar to "git rebase". + + * "git cherry-pick" remembers which commit failed to apply when it is + stopped by conflicts, making it unnecessary to use "commit -c $commit" + to conclude it. + + * "git cvsimport" bails out immediately when the cvs server cannot be + reached, without spewing unnecessary error messages that complain about + the server response it never got. + + * "git grep --no-index" did not honor pathspecs correctly, returning + paths outside the specified area. + + * "git log" type commands now understand globbing pathspecs. You + can say "git log -- '*.txt'" for example. + + * "git rev-list --objects $revs -- $pathspec" now limits the objects listed + in its output properly with the pathspec, in preparation for narrow + clones. + + * "git push" with no parameters gives better advice messages when + "tracking" is used as the push.default semantics or there is no remote + configured yet. + + * "git rerere" learned a new subcommand "remaining" that is similar to + "status" and lists the paths that had conflicts which are known to + rerere, but excludes the paths that have already been marked as + resolved in the index from its output. "git mergetool" has been + updated to use this facility. + + * A possible value to the "push.default" configuration variable, + 'tracking', gained a synonym that more naturally describes what it + does, 'upstream'. + +Also contains various documentation updates. + + +Fixes since v1.7.4 +------------------ + +All of the fixes in the v1.7.4.X maintenance series are included in this +release, unless otherwise noted. + + * We used to keep one file descriptor open for each and every packfile + that we have a mmap window on it (read: "in use"), even when for very + tiny packfiles. We now close the file descriptor early when the entire + packfile fits inside one mmap window. + + * "git apply" used to confuse lines updated by previous hunks as lines + that existed before when applying a hunk, contributing misapplication + of patches with offsets. + + * "git checkout $other_branch" silently removed untracked symbolic links + in the working tree that are in the way in order to check out paths + under it from the named branch (js/checkout-untracked-symlink). + + * "git submodule update" used to honor the --merge/--rebase option (or + corresponding configuration variables) even for a newly cloned + subproject, which made no sense (so/submodule-no-update-first-time). + +--- +exec >/var/tmp/1 +O=v1.7.4.1-291-g01de349 +echo O=$(git describe 'master') +git shortlog --no-merges ^maint ^$O master diff --git a/Documentation/config.txt b/Documentation/config.txt index c5e183516a..701fba92dc 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -376,15 +376,6 @@ core.warnAmbiguousRefs:: If true, git will warn you if the ref name you passed it is ambiguous and might match multiple refs in the .git/refs/ tree. True by default. -core.abbrevguard:: - Even though git makes sure that it uses enough hexdigits to show - an abbreviated object name unambiguously, as more objects are - added to the repository over time, a short name that used to be - unique will stop being unique. Git uses this many extra hexdigits - that are more than necessary to make the object name currently - unique, in the hope that its output will stay unique a bit longer. - Defaults to 0. - core.compression:: An integer -1..9, indicating a default compression level. -1 is the zlib default. 0 means no compression, @@ -1591,7 +1582,8 @@ push.default:: * `matching` - push all matching branches. All branches having the same name in both ends are considered to be matching. This is the default. -* `tracking` - push the current branch to its upstream branch. +* `upstream` - push the current branch to its upstream branch. +* `tracking` - deprecated synonym for `upstream`. * `current` - push the current branch to a branch of the same name. rebase.stat:: diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index a03448f923..7eebbefe7b 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -378,14 +378,6 @@ linkgit:git-mv[1] linkgit:git-commit[1] linkgit:git-update-index[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 51297d09ec..621b720091 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -189,15 +189,6 @@ SEE ALSO -------- linkgit:git-apply[1]. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-annotate.txt b/Documentation/git-annotate.txt index 0590eec056..9eb75c37da 100644 --- a/Documentation/git-annotate.txt +++ b/Documentation/git-annotate.txt @@ -27,10 +27,6 @@ SEE ALSO -------- linkgit:git-blame[1] -AUTHOR ------- -Written by Ryan Anderson <ryan@michonline.com>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 2dcfc097d3..afd2c9ae59 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -246,20 +246,10 @@ If `--index` is not specified, then the submodule commits in the patch are ignored and only the absence or presence of the corresponding subdirectory is checked and (if possible) updated. - SEE ALSO -------- linkgit:git-am[1]. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt index 2411ce5bfe..f4504ba9bf 100644 --- a/Documentation/git-archimport.txt +++ b/Documentation/git-archimport.txt @@ -107,14 +107,6 @@ OPTIONS Archive/branch identifier in a format that `tla log` understands. -Author ------- -Written by Martin Langhoff <martin@laptop.org>. - -Documentation --------------- -Documentation by Junio C Hamano, Martin Langhoff and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index bf5037ab2a..f2b8684596 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -153,14 +153,6 @@ SEE ALSO -------- linkgit:gitattributes[5] -Author ------- -Written by Franck Bui-Huu and Rene Scharfe. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index c39d957c3a..4b4b096ce5 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -241,7 +241,12 @@ exit(3) manual page), as the value is chopped with "& 0377". The special exit code 125 should be used when the current source code cannot be tested. If the script exits with this code, the current -revision will be skipped (see `git bisect skip` above). +revision will be skipped (see `git bisect skip` above). 125 was chosen +as the highest sensible value to use for this purpose, because 126 and 127 +are used by POSIX shells to signal specific error status (127 is for +command not found, 126 is for command found but not executable---these +details do not matter, as they are normal errors in the script, as far as +"bisect run" is concerned). You may often find that during a bisect session you want to have temporary modifications (e.g. s/#define DEBUG 0/#define DEBUG 1/ in a @@ -322,14 +327,6 @@ $ git bisect run sh -c "make || exit 125; ~/check_test_case.sh" + Does the same as the previous example, but on a single line. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - SEE ALSO -------- link:git-bisect-lk2009.html[Fighting regressions with git bisect], diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index c71671b4f9..c4d1ff86c9 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -198,10 +198,6 @@ SEE ALSO -------- linkgit:git-annotate[1] -AUTHOR ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 9106d38e40..c50f189827 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -232,14 +232,6 @@ linkgit:git-remote[1], link:user-manual.html#what-is-a-branch[``Understanding history: What is a branch?''] in the Git User's Manual. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 299007b206..92b01ec25d 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -201,10 +201,6 @@ You can also see what references it offers: $ git ls-remote mybundle ---------------- -Author ------- -Written by Mark Levedahl <mdl123@verizon.net> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 544ba7ba21..2fb95bbd19 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -100,14 +100,6 @@ for each object specified on stdin that does not exist in the repository: <object> SP missing LF ------------ -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 50824e3a2d..30eca6cee6 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -86,15 +86,6 @@ SEE ALSO -------- linkgit:gitattributes[5]. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by James Bowes. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt index 0c0a9c14bc..4d33e7be0f 100644 --- a/Documentation/git-checkout-index.txt +++ b/Documentation/git-checkout-index.txt @@ -172,18 +172,6 @@ $ git checkout-index --prefix=.merged- Makefile This will check out the currently cached copy of `Makefile` into the file `.merged-Makefile`. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - - -Documentation --------------- -Documentation by David Greaves, -Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 880763d391..1063f69023 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,6 +9,7 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] +'git checkout' [-q] [-f] [-m] [--detach] [<commit>] 'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... 'git checkout' --patch [<tree-ish>] [--] [<paths>...] @@ -22,9 +23,10 @@ branch. 'git checkout' [<branch>]:: 'git checkout' -b|-B <new_branch> [<start point>]:: +'git checkout' [--detach] [<commit>]:: This form switches branches by updating the index, working - tree, and HEAD to reflect the specified branch. + tree, and HEAD to reflect the specified branch or commit. + If `-b` is given, a new branch is created as if linkgit:git-branch[1] were called and then checked out; in this case you can @@ -115,6 +117,13 @@ explicitly give a name with '-b' in such a case. Create the new branch's reflog; see linkgit:git-branch[1] for details. +--detach:: + Rather than checking out a branch to work on it, check out a + commit for inspection and discardable experiments. + This is the default behavior of "git checkout <commit>" when + <commit> is not a branch name. See the "DETACHED HEAD" section + below for details. + --orphan:: Create a new 'orphan' branch, named <new_branch>, started from <start_point> and switch to it. The first commit made on this @@ -204,42 +213,140 @@ leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. -Detached HEAD +DETACHED HEAD ------------- +HEAD normally refers to a named branch (e.g. 'master'). Meanwhile, each +branch refers to a specific commit. Let's look at a repo with three +commits, one of them tagged, and with branch 'master' checked out: + +------------ + HEAD (refers to branch 'master') + | + v +a---b---c branch 'master' (refers to commit 'c') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ -It is sometimes useful to be able to 'checkout' a commit that is -not at the tip of one of your branches. The most obvious -example is to check out the commit at a tagged official release -point, like this: +When a commit is created in this state, the branch is updated to refer to +the new commit. Specifically, 'git commit' creates a new commit 'd', whose +parent is commit 'c', and then updates branch 'master' to refer to new +commit 'd'. HEAD still refers to branch 'master' and so indirectly now refers +to commit 'd': ------------ -$ git checkout v2.6.18 +$ edit; git add; git commit + + HEAD (refers to branch 'master') + | + v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') ------------ -Earlier versions of git did not allow this and asked you to -create a temporary branch using the `-b` option, but starting from -version 1.5.0, the above command 'detaches' your HEAD from the -current branch and directly points at the commit named by the tag -(`v2.6.18` in the example above). +It is sometimes useful to be able to checkout a commit that is not at +the tip of any named branch, or even to create a new commit that is not +referenced by a named branch. Let's look at what happens when we +checkout commit 'b' (here we show two ways this may be done): -You can use all git commands while in this state. You can use -`git reset --hard $othercommit` to further move around, for -example. You can make changes and create a new commit on top of -a detached HEAD. You can even create a merge by using `git -merge $othercommit`. +------------ +$ git checkout v2.0 # or +$ git checkout master^^ + + HEAD (refers to commit 'b') + | + v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ -The state you are in while your HEAD is detached is not recorded -by any branch (which is natural --- you are not on any branch). -What this means is that you can discard your temporary commits -and merges by switching back to an existing branch (e.g. `git -checkout master`), and a later `git prune` or `git gc` would -garbage-collect them. If you did this by mistake, you can ask -the reflog for HEAD where you were, e.g. +Notice that regardless of which checkout command we use, HEAD now refers +directly to commit 'b'. This is known as being in detached HEAD state. +It means simply that HEAD refers to a specific commit, as opposed to +referring to a named branch. Let's see what happens when we create a commit: ------------ -$ git log -g -2 HEAD +$ edit; git add; git commit + + HEAD (refers to commit 'e') + | + v + e + / +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ + +There is now a new commit 'e', but it is referenced only by HEAD. We can +of course add yet another commit in this state: + +------------ +$ edit; git add; git commit + + HEAD (refers to commit 'f') + | + v + e---f + / +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ + +In fact, we can perform all the normal git operations. But, let's look +at what happens when we then checkout master: + +------------ +$ git checkout master + + HEAD (refers to branch 'master') + e---f | + / v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') ------------ +It is important to realize that at this point nothing refers to commit +'f'. Eventually commit 'f' (and by extension commit 'e') will be deleted +by the routine git garbage collection process, unless we create a reference +before that happens. If we have not yet moved away from commit 'f', +any of these will create a reference to it: + +------------ +$ git checkout -b foo <1> +$ git branch foo <2> +$ git tag foo <3> +------------ + +<1> creates a new branch 'foo', which refers to commit 'f', and then +updates HEAD to refer to branch 'foo'. In other words, we'll no longer +be in detached HEAD state after this command. + +<2> similarly creates a new branch 'foo', which refers to commit 'f', +but leaves HEAD detached. + +<3> creates a new tag 'foo', which refers to commit 'f', +leaving HEAD detached. + +If we have moved away from commit 'f', then we must first recover its object +name (typically by using git reflog), and then we can create a reference to +it. For example, to see the last two commits to which HEAD referred, we +can use either of these commands: + +------------ +$ git reflog -2 HEAD # or +$ git log -g -2 HEAD +------------ EXAMPLES -------- @@ -315,15 +422,6 @@ $ edit frotz $ git add frotz ------------ - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 73008705eb..01db83039f 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -16,6 +16,25 @@ Given one or more existing commits, apply the change each one introduces, recording a new commit for each. This requires your working tree to be clean (no modifications from the HEAD commit). +When it is not obvious how to apply a change, the following +happens: + +1. The current branch and `HEAD` pointer stay at the last commit + successfully made. +2. The `CHERRY_PICK_HEAD` ref is set to point at the commit that + introduced the change that is difficult to apply. +3. Paths in which the change applied cleanly are updated both + in the index file and in your working tree. +4. For conflicting paths, the index file records up to three + versions, as described in the "TRUE MERGE" section of + linkgit:git-merge[1]. The working tree files will include + a description of the conflict bracketed by the usual + conflict markers `<<<<<<<` and `>>>>>>>`. +5. No other modifications are made. + +See linkgit:git-merge[1] for some hints on resolving such +conflicts. + OPTIONS ------- <commit>...:: @@ -79,6 +98,16 @@ effect to your index in a row. cherry-pick'ed commit, then a fast forward to this commit will be performed. +--strategy=<strategy>:: + Use the given merge strategy. Should only be used once. + See the MERGE STRATEGIES section in linkgit:git-merge[1] + for details. + +-X<option>:: +--strategy-option=<option>:: + Pass the merge strategy-specific option through to the + merge strategy. See linkgit:git-merge[1] for details. + EXAMPLES -------- git cherry-pick master:: @@ -120,13 +149,27 @@ git rev-list --reverse master \-- README | git cherry-pick -n --stdin:: so the result can be inspected and made into a single new commit if suitable. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +The following sequence attempts to backport a patch, bails out because +the code the patch applies to has changed too much, and then tries +again, this time exercising more care about matching up context lines. + +------------ +$ git cherry-pick topic^ <1> +$ git diff <2> +$ git reset --merge ORIG_HEAD <3> +$ git cherry-pick -Xpatience topic^ <4> +------------ +<1> apply the change that would be shown by `git show topic^`. +In this example, the patch does not apply cleanly, so +information about the conflict is written to the index and +working tree and no new commit results. +<2> summarize changes to be reconciled +<3> cancel the cherry-pick. In other words, return to the +pre-cherry-pick state, preserving any local modifications you had in +the working tree. +<4> try to apply the change introduced by `topic^` again, +spending extra time to avoid mistakes based on incorrectly matching +context lines. SEE ALSO -------- diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index fed115acd0..79448c505b 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -63,14 +63,6 @@ SEE ALSO -------- linkgit:git-patch-id[1] -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-citool.txt b/Documentation/git-citool.txt index fb2753c97e..6e5c8126f5 100644 --- a/Documentation/git-citool.txt +++ b/Documentation/git-citool.txt @@ -19,14 +19,6 @@ to the less interactive 'git commit' program. 'git citool' is actually a standard alias for `git gui citool`. See linkgit:git-gui[1] for more details. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 60e38e6e27..974e04ef1a 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -61,12 +61,6 @@ OPTIONS Remove only files ignored by git. This may be useful to rebuild everything from scratch, but keep manually created files. - -Author ------- -Written by Pavel Roskin <proski@gnu.org> - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 42e7021215..8577480074 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -236,17 +236,6 @@ $ git clone --bare -l -s /pub/scm/.../torvalds/linux-2.6.git \ /pub/scm/.../me/subsys-2.6.git ------------ - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 5dcf4278fc..f524d76019 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -93,15 +93,6 @@ SEE ALSO -------- linkgit:git-write-tree[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 8f89f6f08c..d0534b8c05 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -84,9 +84,10 @@ OPTIONS linkgit:git-rebase[1] for details. --reset-author:: - When used with -C/-c/--amend options, declare that the - authorship of the resulting commit now belongs of the committer. - This also renews the author timestamp. + When used with -C/-c/--amend options, or when committing after a + a conflicting cherry-pick, declare that the authorship of the + resulting commit now belongs of the committer. This also renews + the author timestamp. --short:: When doing a dry-run, give the output in the short-format. See @@ -396,12 +397,6 @@ linkgit:git-mv[1], linkgit:git-merge[1], linkgit:git-commit-tree[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 543dd64a46..8804de327f 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -336,15 +336,6 @@ echo "${WS}your whitespace color or blue reverse${RESET}" include::config.txt[] - -Author ------- -Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> - -Documentation --------------- -Documentation by Johannes Schindelin, Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt index 6bc1c21e62..a73933a931 100644 --- a/Documentation/git-count-objects.txt +++ b/Documentation/git-count-objects.txt @@ -25,15 +25,6 @@ OPTIONS and number of objects that can be removed by running `git prune-packed`. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt index d25661eb21..ad93a3e84e 100644 --- a/Documentation/git-cvsexportcommit.txt +++ b/Documentation/git-cvsexportcommit.txt @@ -112,14 +112,6 @@ $ cd ~/project_cvs_checkout $ git cherry cvshead myhead | sed -n 's/^+ //p' | xargs -l1 git cvsexportcommit -c -p -v ------------ -Author ------- -Written by Martin Langhoff <martin@laptop.org> and others. - -Documentation --------------- -Documentation by Martin Langhoff <martin@laptop.org> and others. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 608cd63fc3..6695ab3b4b 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -217,15 +217,6 @@ more stable in practice: * cvs2git (part of cvs2svn), `http://cvs2svn.tigris.org` * parsecvs, `http://cgit.freedesktop.org/~keithp/parsecvs` -Author ------- -Written by Matthias Urlichs <smurf@smurf.noris.de>, with help from -various participants of the git-list <git@vger.kernel.org>. - -Documentation --------------- -Documentation by Matthias Urlichs <smurf@smurf.noris.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 70cbb2cae7..88d814af0e 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -391,22 +391,6 @@ Dependencies ------------ 'git-cvsserver' depends on DBD::SQLite. -Copyright and Authors ---------------------- - -This program is copyright The Open University UK - 2006. - -Authors: - -- Martyn Smith <martyn@catalyst.net.nz> -- Martin Langhoff <martin@laptop.org> - -with ideas and patches from participants of the git-list <git@vger.kernel.org>. - -Documentation --------------- -Documentation by Martyn Smith <martyn@catalyst.net.nz>, Martin Langhoff <martin@laptop.org>, and Matthias Urlichs <smurf@smurf.noris.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index d15cb6a845..ebd13be72e 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -279,17 +279,6 @@ that connected to it, if the IP address is available. REMOTE_ADDR will be available in the environment of hooks called when services are performed. - - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki -<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index 02e015ad9c..039cce2e98 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -156,17 +156,6 @@ selected and output. Here fewest commits different is defined as the number of commits which would be shown by `git log tag..input` will be the smallest number of commits possible. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, but somewhat -butchered by Junio C Hamano <gitster@pobox.com>. Later significantly -updated by Shawn Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt index 9cd8ccef37..8d481948bd 100644 --- a/Documentation/git-diff-files.txt +++ b/Documentation/git-diff-files.txt @@ -46,15 +46,6 @@ omit diff output for unmerged entries and just show "Unmerged". include::diff-format.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index 162cb741b3..6d18486402 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -116,15 +116,6 @@ tell which file is in which state, since the "has been updated" ones show a valid sha1, and the "not in sync with the index" ones will always have the special all-zero sha1. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index a7e37b875f..4e5f127efa 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -162,15 +162,6 @@ in case you care). include::diff-format.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 49105102db..f8d0819113 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -174,14 +174,6 @@ linkgit:gitdiffcore[7], linkgit:git-format-patch[1], linkgit:git-apply[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index db87f1d423..590f410abf 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -31,8 +31,8 @@ OPTIONS --tool=<tool>:: Use the diff tool specified by <tool>. Valid merge tools are: - kdiff3, kompare, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, - ecmerge, diffuse, opendiff, p4merge and araxis. + araxis, bc3, diffuse, emerge, ecmerge, gvimdiff, kdiff3, + kompare, meld, opendiff, p4merge, tkdiff, vimdiff and xxdiff. + If a diff tool is not specified, 'git difftool' will use the configuration variable `diff.tool`. If the @@ -109,15 +109,6 @@ linkgit:git-mergetool[1]:: linkgit:git-config[1]:: Get and set repository or global options - -AUTHOR ------- -Written by David Aguilar <davvid@gmail.com>. - -Documentation --------------- -Documentation by David Aguilar and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index e05b686b1e..781bd6edc3 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -135,15 +135,6 @@ Since 'git fast-import' cannot tag trees, you will not be able to export the linux-2.6.git repository completely, as it contains a tag referencing a tree instead of a commit. - -Author ------- -Written by Johannes E. Schindelin <johannes.schindelin@gmx.de>. - -Documentation --------------- -Documentation by Johannes E. Schindelin <johannes.schindelin@gmx.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 02bb49886c..2c2ea12c5c 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -78,6 +78,10 @@ OPTIONS set of marks. If a mark is defined to different values, the last file wins. +--import-marks-if-exists=<file>:: + Like --import-marks but instead of erroring out, silently + skips the file if it does not exist. + --relative-marks:: After specifying --relative-marks= the paths specified with --import-marks= and --export-marks= are relative @@ -192,7 +196,8 @@ especially when a higher level language such as Perl, Python or Ruby is being used. fast-import is very strict about its input. Where we say SP below we mean -*exactly* one space. Likewise LF means one (and only one) linefeed. +*exactly* one space. Likewise LF means one (and only one) linefeed +and HT one (and only one) horizontal tab. Supplying additional whitespace characters will cause unexpected results, such as branch names or file names with leading or trailing spaces in their name, or early termination of fast-import when it encounters @@ -330,6 +335,11 @@ and control the current import process. More detailed discussion format to the file descriptor set with `--cat-blob-fd` or `stdout` if unspecified. +`ls`:: + Causes fast-import to print a line describing a directory + entry in 'ls-tree' format to the file descriptor set with + `--cat-blob-fd` or `stdout` if unspecified. + `feature`:: Require that fast-import supports the specified feature, or abort if it does not. @@ -915,6 +925,55 @@ This command can be used anywhere in the stream that comments are accepted. In particular, the `cat-blob` command can be used in the middle of a commit but not in the middle of a `data` command. +`ls` +~~~~ +Prints information about the object at a path to a file descriptor +previously arranged with the `--cat-blob-fd` argument. This allows +printing a blob from the active commit (with `cat-blob`) or copying a +blob or tree from a previous commit for use in the current one (with +`filemodify`). + +The `ls` command can be used anywhere in the stream that comments are +accepted, including the middle of a commit. + +Reading from the active commit:: + This form can only be used in the middle of a `commit`. + The path names a directory entry within fast-import's + active commit. The path must be quoted in this case. ++ +.... + 'ls' SP <path> LF +.... + +Reading from a named tree:: + The `<dataref>` can be a mark reference (`:<idnum>`) or the + full 40-byte SHA-1 of a Git tag, commit, or tree object, + preexisting or waiting to be written. + The path is relative to the top level of the tree + named by `<dataref>`. ++ +.... + 'ls' SP <dataref> SP <path> LF +.... + +See `filemodify` above for a detailed description of `<path>`. + +Output uses the same format as `git ls-tree <tree> {litdd} <path>`: + +==== + <mode> SP ('blob' | 'tree' | 'commit') SP <dataref> HT <path> LF +==== + +The <dataref> represents the blob, tree, or commit object at <path> +and can be used in later 'cat-blob', 'filemodify', or 'ls' commands. + +If there is no file or subtree at that path, 'git fast-import' will +instead report + +==== + missing SP <path> LF +==== + `feature` ~~~~~~~~~ Require that fast-import supports the specified feature, or abort if @@ -942,8 +1001,10 @@ import-marks:: any "feature import-marks" command in the stream. cat-blob:: - Ignored. Versions of fast-import not supporting the - "cat-blob" command will exit with a message indicating so. +ls:: + Require that the backend support the 'cat-blob' or 'ls' command. + Versions of fast-import not supporting the specified command + will exit with a message indicating so. This lets the import error out early with a clear message, rather than wasting time on the early part of an import before the unsupported command is detected. @@ -1289,14 +1350,6 @@ operator can use this facility to peek at the objects and refs from an import in progress, at the cost of some added running time and worse compression. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 4a8487c154..48d4bf6d68 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -90,15 +90,6 @@ OPTIONS $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index c76e313923..7146f6ba0b 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -80,16 +80,6 @@ SEE ALSO -------- linkgit:git-pull[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - -Documentation -------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 796e7489ff..03c76c717a 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -405,16 +405,6 @@ warned. (or if your git-gc is not new enough to support arguments to `\--prune`, use `git repack -ad; git prune` instead). - -Author ------- -Written by Petr "Pasky" Baudis <pasky@suse.cz>, -and the git list <git@vger.kernel.org> - -Documentation --------------- -Documentation by Petr Baudis and the git list. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index 75adf7a502..32aff954a2 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -67,15 +67,6 @@ SEE ALSO -------- linkgit:git-merge[1] - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index fac1cf55e5..152e695c81 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -123,7 +123,7 @@ EXAMPLES -------- An example directly producing formatted text. Show the most recent -3 tagged commits:: +3 tagged commits: ------------ #!/bin/sh @@ -140,7 +140,7 @@ Ref: %(*refname) A simple example showing the use of shell eval on the output, -demonstrating the use of --shell. List the prefixes of all heads:: +demonstrating the use of --shell. List the prefixes of all heads: ------------ #!/bin/sh @@ -154,7 +154,7 @@ done A bit more elaborate report on tags, demonstrating that the format -may be an entire script:: +may be an entire script: ------------ #!/bin/sh @@ -204,3 +204,15 @@ eval=`git for-each-ref --shell --format="$fmt" \ refs/tags` eval "$eval" ------------ + +Author +------ +Written by Junio C Hamano <gitster@pobox.com>. + +Documentation +------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 9dcafc6d44..a5525e9aa8 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -278,15 +278,6 @@ SEE ALSO -------- linkgit:git-am[1], linkgit:git-send-email[1] - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fsck-objects.txt b/Documentation/git-fsck-objects.txt index 965a8279c1..90ebb8a594 100644 --- a/Documentation/git-fsck-objects.txt +++ b/Documentation/git-fsck-objects.txt @@ -15,3 +15,7 @@ DESCRIPTION This is a synonym for linkgit:git-fsck[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 86f9b2bf91..c9ede794b0 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -140,14 +140,6 @@ GIT_INDEX_FILE:: GIT_ALTERNATE_OBJECT_DIRECTORIES:: used to specify additional object database roots (usually unset) -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 26632414b2..4966cb5784 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -151,10 +151,6 @@ linkgit:git-reflog[1] linkgit:git-repack[1] linkgit:git-rerere[1] -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-get-tar-commit-id.txt b/Documentation/git-get-tar-commit-id.txt index 790af9573b..8035736c96 100644 --- a/Documentation/git-get-tar-commit-id.txt +++ b/Documentation/git-get-tar-commit-id.txt @@ -22,15 +22,6 @@ return code of 1. This can happen if <tarfile> had not been created using 'git archive' or if the first parameter of 'git archive' had been a tree ID instead of a commit ID or tag. - -Author ------- -Written by Rene Scharfe <rene.scharfe@lsrfire.ath.cx> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index dab0a78fa8..d4d425ea30 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -203,16 +203,6 @@ git grep --all-match -e NODE -e Unexpected:: Looks for a line that has `NODE` or `Unexpected` in files that have lines that match both. -Author ------- -Originally written by Linus Torvalds <torvalds@osdl.org>, later -revamped by Junio C Hamano. - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index 2563710b56..32a833e0ae 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -121,14 +121,6 @@ or or browsed online at http://repo.or.cz/w/git-gui.git/[]. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 51edeecbe5..4b0a502e8e 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -53,14 +53,6 @@ OPTIONS conversion. If the file is read from standard input then this is always implied, unless the --path option is given. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index eccd0ffd38..42aa2b0c01 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -171,17 +171,6 @@ $ git config --global web.browser firefox as they are probably more user specific than repository specific. See linkgit:git-config[1] for more information about this. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> and the git-list -<git@vger.kernel.org>. - -Documentation -------------- -Initial documentation was part of the linkgit:git[1] man page. -Christian Couder <chriscool@tuxfamily.org> extracted and rewrote it a -little. Maintenance is done by the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt index d91cb7ff85..fefa752198 100644 --- a/Documentation/git-http-fetch.txt +++ b/Documentation/git-http-fetch.txt @@ -43,14 +43,6 @@ commit-id:: Verify that everything reachable from target is fetched. Used after an earlier fetch is interrupted. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index ddf7a18dc4..82ae34b9b8 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -91,15 +91,6 @@ With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. - -Author ------- -Written by Nick Hengeveld <nickh@reactrix.com> - -Documentation --------------- -Documentation by Nick Hengeveld - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index 57aba42e66..d3013d6a29 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -124,14 +124,6 @@ Thunderbird in particular is known to be problematic. Thunderbird users may wish to visit this web page for more information: http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email -Author ------- -Derived from isync 1.0.1 by Mike McCormack. - -Documentation --------------- -Documentation by Mike McCormack - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index c2bb81042c..909687fed4 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -85,15 +85,6 @@ new .keep file was successfully created. This is useful to remove a .keep file used as a lock to prevent the race with 'git repack' mentioned above. - -Author ------- -Written by Sergey Vlasov <vsu@altlinux.ru> - -Documentation -------------- -Documentation by Sergey Vlasov - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index eba3cb4998..2c4c716f33 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -16,3 +16,7 @@ DESCRIPTION This is a synonym for linkgit:git-init[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 00d4a124c9..593192555e 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -134,15 +134,6 @@ $ git add . <2> <1> prepare /path/to/my/codebase/.git directory <2> add all existing file to the index - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 7477ce8fa8..08f85ba046 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -84,14 +84,6 @@ If the configuration variable 'instaweb.browser' is not set, 'web.browser' will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. -Author ------- -Written by Eric Wong <normalperson@yhbt.net> - -Documentation --------------- -Documentation by Eric Wong <normalperson@yhbt.net>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index ff41784c60..2c84028838 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -25,6 +25,7 @@ OPTIONS -<n>:: Limits the number of commits to show. + Note that this is a commit limiting option, see below. <since>..<until>:: Show only commits between the named two commits. When @@ -72,16 +73,16 @@ produced by --stat etc. to be prefixed with "\-- " to separate them from options or refnames. +include::rev-list-options.txt[] + +include::pretty-formats.txt[] + Common diff options -~~~~~~~~~~~~~~~~~~~ +------------------- :git-log: 1 include::diff-options.txt[] -include::rev-list-options.txt[] - -include::pretty-formats.txt[] - include::diff-generate-patch.txt[] Examples @@ -181,14 +182,6 @@ This setting can be disabled by the `--no-standard-notes` option, overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, and supplemented by the `--show-notes` option. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-lost-found.txt b/Documentation/git-lost-found.txt index 602b8d5d4d..adf7e1c055 100644 --- a/Documentation/git-lost-found.txt +++ b/Documentation/git-lost-found.txt @@ -67,15 +67,6 @@ $ git rev-parse not-lost-anymore 1ef2b196d909eed523d4f3c9bf54b78cdd6843c6 ------------ -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 86abd13451..4b28292811 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -209,15 +209,6 @@ SEE ALSO -------- linkgit:git-read-tree[1], linkgit:gitignore[5] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano, Josh Triplett, and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index abe7bf9ff9..c3df8c0ebe 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git ls-remote' [--heads] [--tags] [-u <exec> | --upload-pack <exec>] - <repository> <refs>... + <repository> [<refs>...] DESCRIPTION ----------- @@ -67,10 +67,6 @@ EXAMPLES c5db5456ae3b0873fc659c19fafdde22313cc441 refs/tags/v0.99.2 7ceca275d047c90c0c7d5afb13ab97efdf51bd6e refs/tags/v0.99.3 -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 76ed625e7b..16e87fd6dd 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -95,18 +95,6 @@ Object size identified by <object> is given in bytes, and right-justified with minimum width of 7 characters. Object size is given only for blobs (file) entries; for other entries `-` character is used in place of size. - -Author ------- -Written by Petr Baudis <pasky@suse.cz> -Completely rewritten from scratch by Junio C Hamano <gitster@pobox.com>, -another major rewrite by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list -<git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 3ea5aad56c..ed45662cc9 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -80,17 +80,6 @@ This can enabled by default with the configuration option mailinfo.scissors. <patch>:: The patch extracted from e-mail. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index 71912a19a4..9b2049d674 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -46,16 +46,6 @@ OPTIONS --keep-cr:: Do not remove `\r` from lines ending with `\r\n`. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -and Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index eedef1bb1a..ba36ec04f4 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -102,14 +102,6 @@ both '1' and '2' are merge-bases of A and B. Neither one is better than the other (both are 'best' merge bases). When the `--all` option is not given, it is unspecified which best one is output. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - See also -------- linkgit:git-rev-list[1], diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index f334d694e0..635c66956e 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -86,17 +86,6 @@ git merge-file -L a -L b -L c tmp/a123 tmp/b234 tmp/c345:: merges tmp/a123 and tmp/c345 with the base tmp/b234, but uses labels `a` and `c` instead of `tmp/a123` and `tmp/c345`. - -Author ------- -Written by Johannes Schindelin <johannes.schindelin@gmx.de> - - -Documentation --------------- -Documentation by Johannes Schindelin and the git-list <git@vger.kernel.org>, -with parts copied from the original documentation of RCS 'merge'. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt index 921b38f183..6ce54673b0 100644 --- a/Documentation/git-merge-index.txt +++ b/Documentation/git-merge-index.txt @@ -73,15 +73,6 @@ merge once anything has returned an error (i.e., `cat` returned an error for the AA file, because it didn't exist in the original, and thus 'git merge-index' didn't even try to merge the MM thing). -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -One-shot merge by Petr Baudis <pasky@ucw.cz> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-one-file.txt b/Documentation/git-merge-one-file.txt index a163cfca69..ee059def79 100644 --- a/Documentation/git-merge-one-file.txt +++ b/Documentation/git-merge-one-file.txt @@ -15,15 +15,6 @@ DESCRIPTION This is the standard helper program to use with 'git merge-index' to resolve a merge after the trivial merge done with 'git read-tree -m'. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, -Junio C Hamano <gitster@pobox.com> and Petr Baudis <pasky@suse.cz>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-tree.txt b/Documentation/git-merge-tree.txt index f869a7f00f..3bfa7b4220 100644 --- a/Documentation/git-merge-tree.txt +++ b/Documentation/git-merge-tree.txt @@ -23,14 +23,6 @@ merge results outside of the index, and stuff the results back into the index. For this reason, the output from the command omits entries that match the <branch1> tree. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c1efaaa5c5..fb4c05b83f 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -312,15 +312,6 @@ linkgit:git-diff[1], linkgit:git-ls-files[1], linkgit:git-add[1], linkgit:git-rm[1], linkgit:git-mergetool[1] -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mergetool--lib.txt b/Documentation/git-mergetool--lib.txt index d8df55362c..63ededec1d 100644 --- a/Documentation/git-mergetool--lib.txt +++ b/Documentation/git-mergetool--lib.txt @@ -41,14 +41,6 @@ run_merge_tool:: '$MERGED', '$LOCAL', '$REMOTE', and '$BASE' must be defined for use by the merge tool. -Author ------- -Written by David Aguilar <davvid@gmail.com> - -Documentation --------------- -Documentation by David Aguilar and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 1f75a848ba..8c79ae8d2a 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -26,8 +26,8 @@ OPTIONS --tool=<tool>:: Use the merge resolution program specified by <tool>. Valid merge tools are: - kdiff3, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, - diffuse, tortoisemerge, opendiff, p4merge and araxis. + araxis, bc3, diffuse, ecmerge, emerge, gvimdiff, kdiff3, + meld, opendiff, p4merge, tkdiff, tortoisemerge, vimdiff and xxdiff. + If a merge resolution program is not specified, 'git mergetool' will use the configuration variable `merge.tool`. If the @@ -82,14 +82,6 @@ Setting the `mergetool.keepBackup` configuration variable to `false` causes `git mergetool` to automatically remove the backup as files are successfully merged. -Author ------- -Written by Theodore Y Ts'o <tytso@mit.edu> - -Documentation --------------- -Documentation by Theodore Y Ts'o. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt index 8bcc11443d..037ab1045d 100644 --- a/Documentation/git-mktag.txt +++ b/Documentation/git-mktag.txt @@ -32,15 +32,6 @@ exists, is separated by a blank line from the header. The message part may contain a signature that git itself doesn't care about, but that can be verified with gpg. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt index 81e3326772..afe21be64d 100644 --- a/Documentation/git-mktree.txt +++ b/Documentation/git-mktree.txt @@ -34,14 +34,6 @@ OPTIONS optional. Note - if the '-z' option is used, lines are terminated with NUL. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index bdcb58526e..db0e030d69 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -39,17 +39,6 @@ OPTIONS --dry-run:: Do nothing; only show what would happen - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -Rewritten by Ryan Anderson <ryan@michonline.com> -Move functionality added by Josef Weidendorfer <Josef.Weidendorfer@gmx.de> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index 2108237c36..ad1d1468c9 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -70,15 +70,6 @@ Another nice thing you can do is: % git log | git name-rev --stdin ------------ - -Author ------- -Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> - -Documentation --------------- -Documentation by Johannes Schindelin. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 65eff66afe..a51071e524 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -219,15 +219,6 @@ self-contained. Use `git index-pack --fix-thin` With this option, parents that are hidden by grafts are packed nevertheless. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - SEE ALSO -------- linkgit:git-rev-list[1] diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt index d0607879db..db9f0f7055 100644 --- a/Documentation/git-pack-redundant.txt +++ b/Documentation/git-pack-redundant.txt @@ -38,14 +38,6 @@ OPTIONS --verbose:: Outputs some statistics to stderr. Has a small performance penalty. -Author ------- -Written by Lukas Sandström <lukass@etek.chalmers.se> - -Documentation --------------- -Documentation by Lukas Sandström <lukass@etek.chalmers.se> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt index 1ee99c208c..54b92534ce 100644 --- a/Documentation/git-pack-refs.txt +++ b/Documentation/git-pack-refs.txt @@ -56,11 +56,6 @@ a repository with many branches of historical interests. The command usually removes loose refs under `$GIT_DIR/refs` hierarchy after packing them. This option tells it not to. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-parse-remote.txt b/Documentation/git-parse-remote.txt index 39d9daa7e0..02217f6ba2 100644 --- a/Documentation/git-parse-remote.txt +++ b/Documentation/git-parse-remote.txt @@ -17,14 +17,6 @@ routines to parse files under $GIT_DIR/remotes/ and $GIT_DIR/branches/ and configuration variables that are related to fetching, pulling and pushing. -Author ------- -Written by Junio C Hamano. - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt index 4dae1390a5..50e26f43c1 100644 --- a/Documentation/git-patch-id.txt +++ b/Documentation/git-patch-id.txt @@ -29,14 +29,6 @@ OPTIONS <patch>:: The diff to create the ID of. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt index 87dacd797f..a34d62f0da 100644 --- a/Documentation/git-peek-remote.txt +++ b/Documentation/git-peek-remote.txt @@ -37,14 +37,6 @@ OPTIONS The repository to sync from. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt index abfc6b6ead..9e6202cdff 100644 --- a/Documentation/git-prune-packed.txt +++ b/Documentation/git-prune-packed.txt @@ -36,14 +36,6 @@ OPTIONS --quiet:: Squelch the progress indicator. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Ryan Anderson <ryan@michonline.com> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index 4d673a5686..f616a739ef 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -78,14 +78,6 @@ linkgit:git-fsck[1], linkgit:git-gc[1], linkgit:git-reflog[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index b33e6be872..c2a7f103ee 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -224,18 +224,6 @@ SEE ALSO -------- linkgit:git-fetch[1], linkgit:git-merge[1], linkgit:git-config[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Jon Loeliger, -David Greaves, -Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index e11660a2e6..88acfcd4cc 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -406,16 +406,6 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index 579e8d2f3b..7f112f3dcd 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -49,14 +49,6 @@ The default for the patch directory is patches or the value of the $QUILT_PATCHES environment variable. -Author ------- -Written by Eric Biederman <ebiederm@lnxi.com> - -Documentation --------------- -Documentation by Eric Biederman <ebiederm@lnxi.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 634423a69e..26fdadc642 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -421,15 +421,6 @@ SEE ALSO linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; linkgit:gitignore[5] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 96680c8456..620d50e71f 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -66,8 +66,9 @@ would be: D---E---F---G master ------------ -The latter form is just a short-hand of `git checkout topic` -followed by `git rebase master`. +*NOTE:* The latter form is just a short-hand of `git checkout topic` +followed by `git rebase master`. When rebase exits `topic` will +remain the checked-out branch. If the upstream branch already contains a change you have made (e.g., because you mailed a patch which was applied upstream), then that commit @@ -658,7 +659,6 @@ The ripple effect of a "hard case" recovery is especially bad: 'everyone' downstream from 'topic' will now have to perform a "hard case" recovery too! - BUGS ---- The todo list presented by `--preserve-merges --interactive` does not @@ -681,15 +681,6 @@ by moving the "pick 4" line will result in the following history: 1 --- 2 --- 4 --- 5 ------------ -Authors ------- -Written by Junio C Hamano <gitster@pobox.com> and -Johannes E. Schindelin <johannes.schindelin@gmx.de> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index 2790eebaff..f34e0ae1bd 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -151,15 +151,6 @@ SEE ALSO -------- linkgit:git-send-pack[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index e50bd9b68d..09057bf90c 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -90,14 +90,6 @@ them. --verbose:: Print extra information on screen. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt index 8fc809f82b..9893376487 100644 --- a/Documentation/git-relink.txt +++ b/Documentation/git-relink.txt @@ -24,14 +24,6 @@ OPTIONS <dir>:: Directories containing a .git/objects/ subdirectory. -Author ------- -Written by Ryan Anderson <ryan@michonline.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote-ext.txt b/Documentation/git-remote-ext.txt index 2d65cfefd5..68263a6a53 100644 --- a/Documentation/git-remote-ext.txt +++ b/Documentation/git-remote-ext.txt @@ -7,17 +7,17 @@ git-remote-ext - Bridge smart transport to external command. SYNOPSIS -------- -git remote add nick "ext::<command>[ <arguments>...]" +git remote add <nick> "ext::<command>[ <arguments>...]" DESCRIPTION ----------- -This remote helper uses the specified 'program' to connect +This remote helper uses the specified '<command>' to connect to a remote git server. -Data written to stdin of this specified 'program' is assumed +Data written to stdin of the specified '<command>' is assumed to be sent to a git:// server, git-upload-pack, git-receive-pack or git-upload-archive (depending on situation), and data read -from stdout of this program is assumed to be received from +from stdout of <command> is assumed to be received from the same service. Command and arguments are separated by an unescaped space. @@ -40,7 +40,7 @@ The following sequences have a special meaning: git wants to invoke. '%G' (must be the first characters in an argument):: - This argument will not be passed to 'program'. Instead, it + This argument will not be passed to '<command>'. Instead, it will cause the helper to start by sending git:// service requests to the remote side with the service field set to an appropriate value and the repository field set to rest of the argument. Default is not to send @@ -50,7 +50,7 @@ This is useful if remote side is git:// server accessed over some tunnel. '%V' (must be first characters in argument):: - This argument will not be passed to 'program'. Instead it sets + This argument will not be passed to '<command>'. Instead it sets the vhost field in the git:// service request (to rest of the argument). Default is not to send vhost in such request (if sent). @@ -76,7 +76,7 @@ EXAMPLES: --------- This remote helper is transparently used by git when you use commands such as "git fetch <URL>", "git clone <URL>", -, "git push <URL>" or "git remote add nick <URL>", where <URL> +, "git push <URL>" or "git remote add <nick> <URL>", where <URL> begins with `ext::`. Examples: "ext::ssh -i /home/foo/.ssh/somekey user@host.example %S 'foo/repo'":: diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 3a23477ce7..87cd11f2c4 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -201,12 +201,12 @@ REF LIST ATTRIBUTES OPTIONS ------- -'option verbosity' <N>:: +'option verbosity' <n>:: Changes the verbosity of messages displayed by the helper. - A value of 0 for N means that processes operate + A value of 0 for <n> means that processes operate quietly, and the helper produces only error output. 1 is the default level of verbosity, and higher values - of N correspond to the number of -v flags passed on the + of <n> correspond to the number of -v flags passed on the command line. 'option progress' \{'true'|'false'\}:: @@ -239,10 +239,6 @@ SEE ALSO -------- linkgit:git-remote[1] -Documentation -------------- -Documentation by Daniel Barkalow and Ilari Liusvaara - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index c258ea48db..37bd3e5388 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -214,16 +214,6 @@ linkgit:git-fetch[1] linkgit:git-branch[1] linkgit:git-config[1] -Author ------- -Written by Junio Hamano - - -Documentation --------------- -Documentation by J. Bruce Fields and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 27f7865b06..0decee240b 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -123,15 +123,6 @@ need to set the configuration variable `repack.UseDeltaBaseOffset` to is unaffected by this option as the conversion is performed on the fly as needed in that case. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Ryan Anderson <ryan@michonline.com> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index fde2092582..17df525275 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -80,17 +80,6 @@ linkgit:git-tag[1] linkgit:git-branch[1] linkgit:git[1] -Author ------- -Written by Christian Couder <chriscool@tuxfamily.org> and Junio C -Hamano <gitster@pobox.com>, based on 'git tag' by Kristian Hogsberg -<krh@redhat.com> and Carlos Rica <jasampler@gmail.com>. - -Documentation --------------- -Documentation by Christian Couder <chriscool@tuxfamily.org> and the -git-list <git@vger.kernel.org>, based on 'git tag' documentation. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt index e5bdb5533e..a0d1fa6594 100644 --- a/Documentation/git-repo-config.txt +++ b/Documentation/git-repo-config.txt @@ -16,3 +16,7 @@ DESCRIPTION This is a synonym for linkgit:git-config[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-request-pull.txt b/Documentation/git-request-pull.txt index 400f61f6e2..3521d8e3c8 100644 --- a/Documentation/git-request-pull.txt +++ b/Documentation/git-request-pull.txt @@ -29,14 +29,6 @@ OPTIONS <end>:: Commit to end at; defaults to HEAD. -Author ------- -Written by Ryan Anderson <ryan@michonline.com> and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index db99d4786e..52db1d80cf 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -7,7 +7,7 @@ git-rerere - Reuse recorded resolution of conflicted merges SYNOPSIS -------- -'git rerere' ['clear'|'forget' [<pathspec>]|'diff'|'status'|'gc'] +'git rerere' ['clear'|'forget' <pathspec>|'diff'|'status'|'gc'] DESCRIPTION ----------- @@ -43,7 +43,7 @@ will automatically invoke this command. 'forget' <pathspec>:: This resets the conflict resolutions which rerere has recorded for the current -conflict in <pathspec>. The <pathspec> is optional. +conflict in <pathspec>. 'diff':: @@ -205,11 +205,6 @@ would conflict the same way as the test merge you resolved earlier. 'git rerere' will be run by 'git rebase' to help you resolve this conflict. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 927ecee2f2..8481f9db74 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -397,15 +397,6 @@ entries: X means any state and U means an unmerged index. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 8e1e32908c..5ce4d7fd0b 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -105,16 +105,6 @@ include::rev-list-options.txt[] include::pretty-formats.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano, Jonas Fonseca -and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index ff23cb0219..02c44c999f 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -308,16 +308,6 @@ $ git rev-parse --default master --verify $REV + but if $REV is empty, the commit object name from master will be printed. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> . -Junio C Hamano <gitster@pobox.com> and Pierre Habouzit <madcoder@debian.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 752fc88e76..ac10cfbb14 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -80,6 +80,16 @@ effect to your index in a row. --signoff:: Add Signed-off-by line at the end of the commit message. +--strategy=<strategy>:: + Use the given merge strategy. Should only be used once. + See the MERGE STRATEGIES section in linkgit:git-merge[1] + for details. + +-X<option>:: +--strategy-option=<option>:: + Pass the merge strategy-specific option through to the + merge strategy. See linkgit:git-merge[1] for details. + EXAMPLES -------- git revert HEAD~3:: @@ -95,14 +105,6 @@ git revert -n master{tilde}5..master{tilde}2:: changes. The revert only modifies the working tree and the index. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - SEE ALSO -------- linkgit:git-cherry-pick[1] diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 0adbe8b1f8..8c0554f971 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -153,14 +153,6 @@ SEE ALSO -------- linkgit:git-add[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 7ec9dabe68..ee14f74fd3 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -348,7 +348,6 @@ sendemail.confirm:: one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' in the previous section for the meaning of these values. - Use gmail as the smtp server ---------------------------- @@ -363,20 +362,6 @@ Add the following section to the config file: Note: the following perl modules are required Net::SMTP::SSL, MIME::Base64 and Authen::SASL - -Author ------- -Written by Ryan Anderson <ryan@michonline.com> - -git-send-email is originally based upon -send_lots_of_email.pl by Greg Kroah-Hartman. - - -Documentation --------------- -Documentation by Ryan Anderson - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index deaa7d9654..17f8f55526 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -114,15 +114,6 @@ With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 3da241304b..053df505bc 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -66,15 +66,6 @@ get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt index 6403126a02..d7d4b92894 100644 --- a/Documentation/git-shell.txt +++ b/Documentation/git-shell.txt @@ -28,14 +28,6 @@ read and execute permissions to the directory in order to execute the programs in it. The programs are executed with a cwd of $HOME, and <argument> is parsed as a command-line string. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 5cc3baf48d..ff3755b4c7 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -68,15 +68,6 @@ spelled differently. include::mailmap.txt[] - -Author ------- -Written by Jeff Garzik <jgarzik@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 3b0c88271a..ee4559b6f2 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -200,17 +200,6 @@ shows 10 reflog entries going back from the tip as of 1 hour ago. Without `--list`, the output also shows how these tips are topologically related with each other. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt index 8382fbe0ec..c4d99f1028 100644 --- a/Documentation/git-show-index.txt +++ b/Documentation/git-show-index.txt @@ -20,15 +20,6 @@ The information it outputs is subset of what you can get from 'git verify-pack -v'; this command only shows the packfile offset and SHA1 of each object. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index be0ec189af..3c45895299 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -177,11 +177,6 @@ linkgit:git-ls-remote[1], linkgit:git-update-ref[1], linkgit:gitrepository-layout[5] -AUTHORS -------- -Written by Linus Torvalds <torvalds@osdl.org>. -Man page by Jonas Fonseca <fonseca@diku.dk>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index f0a8a1aff3..7f075e84f5 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -72,17 +72,6 @@ Discussion include::i18n.txt[] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com>. Significantly enhanced by -Johannes Schindelin <Johannes.Schindelin@gmx.de>. - - -Documentation -------------- -Documentation by David Greaves, Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-stage.txt b/Documentation/git-stage.txt index 7f251a5865..ba3fe0d7f5 100644 --- a/Documentation/git-stage.txt +++ b/Documentation/git-stage.txt @@ -17,3 +17,7 @@ DESCRIPTION This is a synonym for linkgit:git-add[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 8728f7a514..79abc38e50 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -257,10 +257,6 @@ linkgit:git-commit[1], linkgit:git-reflog[1], linkgit:git-reset[1] -AUTHOR ------- -Written by Nanako Shiraishi <nanako3@bluebottle.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 5102a23f8e..00b699fef7 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -174,14 +174,6 @@ SEE ALSO -------- linkgit:gitignore[5] -Author ------- -Written by Junio C Hamano <gitster@pobox.com>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt index 7508c0e42d..10509cc450 100644 --- a/Documentation/git-stripspace.txt +++ b/Documentation/git-stripspace.txt @@ -23,14 +23,6 @@ OPTIONS <stream>:: Byte stream to act on. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1ed331c599..3a5aa01435 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -257,11 +257,6 @@ This file should be formatted in the same way as `$GIT_DIR/config`. The key to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5] for details. - -AUTHOR ------- -Written by Lars Hjemli <hjemli@gmail.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 0ade2ce54e..ea8fafd18a 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -66,7 +66,7 @@ COMMANDS Set the 'rewriteRoot' option in the [svn-remote] config. --rewrite-uuid=<UUID>;; Set the 'rewriteUUID' option in the [svn-remote] config. ---username=<USER>;; +--username=<user>;; For transports that SVN handles authentication for (http, https, and plain svn), specify the username. For other transports (eg svn+ssh://), you must include the username in @@ -443,8 +443,8 @@ OPTIONS Only used with the 'init' command. These are passed directly to 'git init'. --r <ARG>:: ---revision <ARG>:: +-r <arg>:: +--revision <arg>:: Used with the 'fetch' command. + This allows revision ranges for partial/cauterized history @@ -878,10 +878,6 @@ SEE ALSO -------- linkgit:git-rebase[1] -Author ------- -Written by Eric Wong <normalperson@yhbt.net>. - -Documentation -------------- -Written by Eric Wong <normalperson@yhbt.net>. +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt index 33a1536294..d7795ed657 100644 --- a/Documentation/git-symbolic-ref.txt +++ b/Documentation/git-symbolic-ref.txt @@ -53,10 +53,6 @@ and symbolic refs are used by default. symbolic ref were printed correctly, with status 1 if the requested name is not a symbolic ref, or 128 if another error occurs. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 65f76c5440..61263fa329 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -262,15 +262,6 @@ SEE ALSO -------- linkgit:git-check-ref-format[1]. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, -Junio C Hamano <gitster@pobox.com> and Chris Wright <chrisw@osdl.org>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt index 3c786bd283..5f15754257 100644 --- a/Documentation/git-tar-tree.txt +++ b/Documentation/git-tar-tree.txt @@ -76,14 +76,6 @@ git tar-tree HEAD:Documentation/ git-docs > git-1.4.0-docs.tar:: Put everything in the current head's Documentation/ directory into 'git-1.4.0-docs.tar', with the prefix 'git-docs/'. -Author ------- -Written by Rene Scharfe. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-unpack-file.txt b/Documentation/git-unpack-file.txt index 995db9fead..c49d727f74 100644 --- a/Documentation/git-unpack-file.txt +++ b/Documentation/git-unpack-file.txt @@ -22,14 +22,6 @@ OPTIONS <blob>:: Must be a blob id -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-unpack-objects.txt b/Documentation/git-unpack-objects.txt index 36d1038056..dd7799095b 100644 --- a/Documentation/git-unpack-objects.txt +++ b/Documentation/git-unpack-objects.txt @@ -43,15 +43,6 @@ OPTIONS --strict:: Don't write objects with broken content or links. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 1ca56c85aa..d3931294d1 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -365,15 +365,6 @@ SEE ALSO linkgit:git-config[1], linkgit:git-add[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index 9639f705af..e25a65a80f 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -84,10 +84,6 @@ An update will fail (without changing <ref>) if the current user is unable to create a new log file, append to the existing log file or does not have committer information available. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-server-info.txt b/Documentation/git-update-server-info.txt index 035cc3018f..775024da3e 100644 --- a/Documentation/git-update-server-info.txt +++ b/Documentation/git-update-server-info.txt @@ -38,15 +38,6 @@ what they are for: * info/refs - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-upload-archive.txt b/Documentation/git-upload-archive.txt index f5f2b3908b..acbf634f85 100644 --- a/Documentation/git-upload-archive.txt +++ b/Documentation/git-upload-archive.txt @@ -24,14 +24,6 @@ OPTIONS <directory>:: The repository to get a tar archive from. -Author ------- -Written by Franck Bui-Huu. - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt index 71ca4ef442..4c0ca9ded2 100644 --- a/Documentation/git-upload-pack.txt +++ b/Documentation/git-upload-pack.txt @@ -33,14 +33,6 @@ OPTIONS <directory>:: The repository to sync from. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt index 458f3e2755..6498f7cb69 100644 --- a/Documentation/git-var.txt +++ b/Documentation/git-var.txt @@ -65,14 +65,6 @@ linkgit:git-commit-tree[1] linkgit:git-tag[1] linkgit:git-config[1] -Author ------- -Written by Eric Biederman <ebiederm@xmission.com> - -Documentation --------------- -Documentation by Eric Biederman and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt index 0f848de8b2..7c2428d569 100644 --- a/Documentation/git-verify-pack.txt +++ b/Documentation/git-verify-pack.txt @@ -47,14 +47,6 @@ for objects that are not deltified in the pack, and for objects that are deltified. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index 711219749c..8c9a71865b 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -22,14 +22,6 @@ OPTIONS <tag>...:: SHA1 identifiers of git tag objects. -Author ------- -Written by Jan Harkes <jaharkes@cs.cmu.edu> and Eric W. Biederman <ebiederm@xmission.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index c0416e5e1a..69d92fa00e 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -116,16 +116,6 @@ $ git config --global web.browser firefox as they are probably more user specific than repository specific. See linkgit:git-config[1] for more information about this. -Author ------- -Written by Christian Couder <chriscool@tuxfamily.org> and the git-list -<git@vger.kernel.org>, based on 'git mergetool' by Theodore Y. Ts'o. - -Documentation -------------- -Documentation by Christian Couder <chriscool@tuxfamily.org> and the -git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index ea753cdafc..31f3663ae7 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -63,17 +63,6 @@ git whatchanged --since="2 weeks ago" \-- gitk:: The "--" is necessary to avoid confusion with the *branch* named 'gitk' - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt index bfceacacb3..e8c94c1352 100644 --- a/Documentation/git-write-tree.txt +++ b/Documentation/git-write-tree.txt @@ -36,15 +36,6 @@ OPTIONS `<prefix>`. This can be used to write the tree object for a subproject that is in the named subdirectory. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index 0c32d45248..5e57f6995a 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -745,16 +745,12 @@ unmerged version of a file when a merge is in progress. Authors ------- -* git's founding father is Linus Torvalds <torvalds@osdl.org>. -* The current git nurse is Junio C Hamano <gitster@pobox.com>. -* The git potty was written by Andreas Ericsson <ae@op5.se>. -* General upbringing is handled by the git-list <git@vger.kernel.org>. - -Documentation --------------- -The documentation for git suite was started by David Greaves -<david@dgreaves.com>, and later enhanced greatly by the -contributors on the git-list <git@vger.kernel.org>. +Git was started by Linus Torvalds, and is currently maintained by Junio +C Hamano. Numerous contributions have come from the git mailing list +<git@vger.kernel.org>. For a more complete list of contributors, see +http://git-scm.com/about. If you have a clone of git.git itself, the +output of linkgit:git-shortlog[1] and linkgit:git-blame[1] can show you +the authors for specific parts of the project. Reporting Bugs -------------- diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 7e7e12168e..15aebc6062 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -632,7 +632,7 @@ Performing a three-way merge `merge` ^^^^^^^ -The attribute `merge` affects how three versions of a file is +The attribute `merge` affects how three versions of a file are merged when a file-level merge is necessary during `git merge`, and other commands such as `git revert` and `git cherry-pick`. @@ -646,15 +646,15 @@ Unset:: Take the version from the current branch as the tentative merge result, and declare that the merge has - conflicts. This is suitable for binary files that does + conflicts. This is suitable for binary files that do not have a well-defined merge semantics. Unspecified:: By default, this uses the same built-in 3-way merge - driver as is the case the `merge` attribute is set. - However, `merge.default` configuration variable can name - different merge driver to be used for paths to which the + driver as is the case when the `merge` attribute is set. + However, the `merge.default` configuration variable can name + different merge driver to be used with paths for which the `merge` attribute is unspecified. String:: diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 6928724a05..f734f97b8e 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -169,10 +169,6 @@ See also http://marc.info/?l=git&m=116563135620359 and http://marc.info/?l=git&m=119150393620273 for further information. -Documentation -------------- -Documentation by Pierre Habouzit and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 8416f3445a..2e7328b830 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -156,11 +156,6 @@ SEE ALSO linkgit:git-rm[1], linkgit:git-update-index[1], linkgit:gitrepository-layout[5] -Documentation -------------- -Documentation by David Greaves, Junio C Hamano, Josh Triplett, -Frank Lichtenheld, and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index e21bac4f3f..e10ac58cae 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -113,15 +113,6 @@ SEE ALSO A minimal repository browser and git tool output highlighter written in C using Ncurses. -Author ------- -Written by Paul Mackerras <paulus@samba.org>. - -Documentation --------------- -Documentation by Junio C Hamano, Jonas Fonseca, and the git-list -<git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 68977943e7..15a2186559 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -90,10 +90,6 @@ SEE ALSO -------- linkgit:git-submodule[1] linkgit:git-config[1] -DOCUMENTATION -------------- -Documentation by Lars Hjemli <hjemli@gmail.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index f04b48ef0d..33716a31d0 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -273,6 +273,29 @@ This commit is referred to as a "merge commit", or sometimes just a <<def_pack,pack>>, to assist in efficiently accessing the contents of a pack. +[[def_pathspec]]pathspec:: + Pattern used to specify paths. ++ +Pathspecs are used on the command line of "git ls-files", "git +ls-tree", "git grep", "git checkout", and many other commands to +limit the scope of operations to some subset of the tree or +worktree. See the documentation of each command for whether +paths are relative to the current directory or toplevel. The +pathspec syntax is as follows: + +* any path matches itself +* the pathspec up to the last slash represents a + directory prefix. The scope of that pathspec is + limited to that subtree. +* the rest of the pathspec is a pattern for the remainder + of the pathname. Paths relative to the directory + prefix will be matched against that pattern using fnmatch(3); + in particular, '*' and '?' _can_ match directory separators. ++ +For example, Documentation/*.jpg will match all .jpg files +in the Documentation subtree, +including Documentation/chapter_1/figure_1.jpg. + [[def_parent]]parent:: A <<def_commit_object,commit object>> contains a (possibly empty) list of the logical predecessor(s) in the line of development, i.e. its diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index 1e5c22c5e5..33bf74c334 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -33,10 +33,10 @@ merge.stat:: merge.tool:: Controls which merge resolution program is used by - linkgit:git-mergetool[1]. Valid built-in values are: "kdiff3", - "tkdiff", "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff", - "diffuse", "ecmerge", "tortoisemerge", "p4merge", "araxis" and - "opendiff". Any other value is treated is custom merge tool + linkgit:git-mergetool[1]. Valid built-in values are: "araxis", + "bc3", "diffuse", "ecmerge", "emerge", "gvimdiff", "kdiff3", "meld", + "opendiff", "p4merge", "tkdiff", "tortoisemerge", "vimdiff" + and "xxdiff". Any other value is treated is custom merge tool and there must be a corresponding mergetool.<tool>.cmd option. merge.verbosity:: diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index e33e0f8e11..b613d4ed08 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -75,9 +75,17 @@ option can be used to override --squash. ifndef::git-pull[] -q:: --quiet:: - Operate quietly. + Operate quietly. Implies --no-progress. -v:: --verbose:: Be verbose. + +--progress:: +--no-progress:: + Turn progress on/off explicitly. If neither is specified, + progress is shown if standard error is connected to a terminal. + Note that not all merge strategies may support progress + reporting. + endif::git-pull[] diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 9c47ad885b..09860de9c2 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -1,164 +1,10 @@ -Commit Formatting -~~~~~~~~~~~~~~~~~ - -ifdef::git-rev-list[] -Using these options, linkgit:git-rev-list[1] will act similar to the -more specialized family of commit log tools: linkgit:git-log[1], -linkgit:git-show[1], and linkgit:git-whatchanged[1] -endif::git-rev-list[] - -include::pretty-options.txt[] - ---relative-date:: - - Synonym for `--date=relative`. - ---date=(relative|local|default|iso|rfc|short|raw):: - - Only takes effect for dates shown in human-readable format, such - as when using "--pretty". `log.date` config variable sets a default - value for log command's --date option. -+ -`--date=relative` shows dates relative to the current time, -e.g. "2 hours ago". -+ -`--date=local` shows timestamps in user's local timezone. -+ -`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. -+ -`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 -format, often found in E-mail messages. -+ -`--date=short` shows only date but not time, in `YYYY-MM-DD` format. -+ -`--date=raw` shows the date in the internal raw git format `%s %z` format. -+ -`--date=default` shows timestamps in the original timezone -(either committer's or author's). - -ifdef::git-rev-list[] ---header:: - - Print the contents of the commit in raw-format; each record is - separated with a NUL character. -endif::git-rev-list[] - ---parents:: - - Print also the parents of the commit (in the form "commit parent..."). - Also enables parent rewriting, see 'History Simplification' below. - ---children:: - - Print also the children of the commit (in the form "commit child..."). - Also enables parent rewriting, see 'History Simplification' below. - -ifdef::git-rev-list[] ---timestamp:: - Print the raw commit timestamp. -endif::git-rev-list[] - ---left-right:: - - Mark which side of a symmetric diff a commit is reachable from. - Commits from the left side are prefixed with `<` and those from - the right with `>`. If combined with `--boundary`, those - commits are prefixed with `-`. -+ -For example, if you have this topology: -+ ------------------------------------------------------------------------ - y---b---b branch B - / \ / - / . - / / \ - o---x---a---a branch A ------------------------------------------------------------------------ -+ -you would get an output like this: -+ ------------------------------------------------------------------------ - $ git rev-list --left-right --boundary --pretty=oneline A...B - - >bbbbbbb... 3rd on b - >bbbbbbb... 2nd on b - <aaaaaaa... 3rd on a - <aaaaaaa... 2nd on a - -yyyyyyy... 1st on b - -xxxxxxx... 1st on a ------------------------------------------------------------------------ - ---graph:: - - Draw a text-based graphical representation of the commit history - on the left hand side of the output. This may cause extra lines - to be printed in between commits, in order for the graph history - to be drawn properly. -+ -This enables parent rewriting, see 'History Simplification' below. -+ -This implies the '--topo-order' option by default, but the -'--date-order' option may also be specified. - -ifdef::git-rev-list[] ---count:: - Print a number stating how many commits would have been - listed, and suppress all other output. When used together - with '--left-right', instead print the counts for left and - right commits, separated by a tab. -endif::git-rev-list[] - - -ifndef::git-rev-list[] -Diff Formatting -~~~~~~~~~~~~~~~ - -Below are listed options that control the formatting of diff output. -Some of them are specific to linkgit:git-rev-list[1], however other diff -options may be given. See linkgit:git-diff-files[1] for more options. - --c:: - - With this option, diff output for a merge commit - shows the differences from each of the parents to the merge result - simultaneously instead of showing pairwise diff between a parent - and the result one at a time. Furthermore, it lists only files - which were modified from all parents. - ---cc:: - - This flag implies the '-c' options and further compresses the - patch output by omitting uninteresting hunks whose contents in - the parents have only two variants and the merge result picks - one of them without modification. - --m:: - - This flag makes the merge commits show the full diff like - regular commits; for each merge parent, a separate log entry - and diff is generated. An exception is that only diff against - the first parent is shown when '--first-parent' option is given; - in that case, the output represents the changes the merge - brought _into_ the then-current branch. - --r:: - - Show recursive diffs. - --t:: - - Show the tree objects in the diff output. This implies '-r'. - --s:: - Suppress diff output. -endif::git-rev-list[] - Commit Limiting ~~~~~~~~~~~~~~~ Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit -limiting may be applied. +limiting may be applied. Note that they are applied before commit +ordering and formatting options, such as '--reverse'. -- @@ -735,3 +581,158 @@ These options are mostly targeted for packing of git repositories. --do-walk:: Overrides a previous --no-walk. + +Commit Formatting +~~~~~~~~~~~~~~~~~ + +ifdef::git-rev-list[] +Using these options, linkgit:git-rev-list[1] will act similar to the +more specialized family of commit log tools: linkgit:git-log[1], +linkgit:git-show[1], and linkgit:git-whatchanged[1] +endif::git-rev-list[] + +include::pretty-options.txt[] + +--relative-date:: + + Synonym for `--date=relative`. + +--date=(relative|local|default|iso|rfc|short|raw):: + + Only takes effect for dates shown in human-readable format, such + as when using "--pretty". `log.date` config variable sets a default + value for log command's --date option. ++ +`--date=relative` shows dates relative to the current time, +e.g. "2 hours ago". ++ +`--date=local` shows timestamps in user's local timezone. ++ +`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. ++ +`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 +format, often found in E-mail messages. ++ +`--date=short` shows only date but not time, in `YYYY-MM-DD` format. ++ +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ +`--date=default` shows timestamps in the original timezone +(either committer's or author's). + +ifdef::git-rev-list[] +--header:: + + Print the contents of the commit in raw-format; each record is + separated with a NUL character. +endif::git-rev-list[] + +--parents:: + + Print also the parents of the commit (in the form "commit parent..."). + Also enables parent rewriting, see 'History Simplification' below. + +--children:: + + Print also the children of the commit (in the form "commit child..."). + Also enables parent rewriting, see 'History Simplification' below. + +ifdef::git-rev-list[] +--timestamp:: + Print the raw commit timestamp. +endif::git-rev-list[] + +--left-right:: + + Mark which side of a symmetric diff a commit is reachable from. + Commits from the left side are prefixed with `<` and those from + the right with `>`. If combined with `--boundary`, those + commits are prefixed with `-`. ++ +For example, if you have this topology: ++ +----------------------------------------------------------------------- + y---b---b branch B + / \ / + / . + / / \ + o---x---a---a branch A +----------------------------------------------------------------------- ++ +you would get an output like this: ++ +----------------------------------------------------------------------- + $ git rev-list --left-right --boundary --pretty=oneline A...B + + >bbbbbbb... 3rd on b + >bbbbbbb... 2nd on b + <aaaaaaa... 3rd on a + <aaaaaaa... 2nd on a + -yyyyyyy... 1st on b + -xxxxxxx... 1st on a +----------------------------------------------------------------------- + +--graph:: + + Draw a text-based graphical representation of the commit history + on the left hand side of the output. This may cause extra lines + to be printed in between commits, in order for the graph history + to be drawn properly. ++ +This enables parent rewriting, see 'History Simplification' below. ++ +This implies the '--topo-order' option by default, but the +'--date-order' option may also be specified. + +ifdef::git-rev-list[] +--count:: + Print a number stating how many commits would have been + listed, and suppress all other output. When used together + with '--left-right', instead print the counts for left and + right commits, separated by a tab. +endif::git-rev-list[] + + +ifndef::git-rev-list[] +Diff Formatting +~~~~~~~~~~~~~~~ + +Below are listed options that control the formatting of diff output. +Some of them are specific to linkgit:git-rev-list[1], however other diff +options may be given. See linkgit:git-diff-files[1] for more options. + +-c:: + + With this option, diff output for a merge commit + shows the differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a parent + and the result one at a time. Furthermore, it lists only files + which were modified from all parents. + +--cc:: + + This flag implies the '-c' options and further compresses the + patch output by omitting uninteresting hunks whose contents in + the parents have only two variants and the merge result picks + one of them without modification. + +-m:: + + This flag makes the merge commits show the full diff like + regular commits; for each merge parent, a separate log entry + and diff is generated. An exception is that only diff against + the first parent is shown when '--first-parent' option is given; + in that case, the output represents the changes the merge + brought _into_ the then-current branch. + +-r:: + + Show recursive diffs. + +-t:: + + Show the tree objects in the diff output. This implies '-r'. + +-s:: + Suppress diff output. +endif::git-rev-list[] diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index 9e92734bc1..04fceee253 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -25,7 +25,8 @@ blobs contained in a commit. first match in the following rules: . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually - useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); + useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD`, `MERGE_HEAD` + and `CHERRY_PICK_HEAD`); . otherwise, `refs/<name>` if exists; @@ -46,6 +47,8 @@ you can change the tip of the branch back to the state before you ran them easily. MERGE_HEAD records the commit(s) you are merging into your branch when you run 'git merge'. +CHERRY_PICK_HEAD records the commit you are cherry-picking +when you run 'git cherry-pick'. + Note that any of the `refs/*` cases above may come either from the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. |