diff options
Diffstat (limited to 'Documentation')
41 files changed, 1183 insertions, 389 deletions
diff --git a/Documentation/RelNotes/1.7.5.1.txt b/Documentation/RelNotes/1.7.5.1.txt new file mode 100644 index 0000000000..c6ebd76d19 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.1.txt @@ -0,0 +1,47 @@ +Git v1.7.5.1 Release Notes +========================== + +Fixes since v1.7.5 +------------------ + + * When an object "$tree:$path" does not exist, if $path does exist in the + subtree of $tree that corresponds to the subdirectory the user is in, + git now suggests using "$tree:./$path" in addition to the advice to use + the full path from the root of the working tree. + + * The "--date=relative" output format used to say "X years, 12 months" + when it should have said "X+1 years". + + * The smart-HTTP transfer was broken in 1.7.5 when the client needs + to issue a small POST (which uses content-length) and then a large + POST (which uses chunked) back to back. + + * "git clean" used to fail on an empty directory that is not readable, + even though rmdir(2) could remove such a directory. Now we attempt it + as the last resort. + + * The "--dirstat" option of "diff" family of commands used to totally + ignore a change that only rearranged lines within a file. Such a + change now counts as at least a minimum but non zero change. + + * The "--dirstat" option of "diff" family of commands used to use the + pathname in the original, instead of the pathname in the result, + when renames are involved. + + * "git pack-object" did not take core.bigfilethreashold into account + (unlike fast-import); now it does. + + * "git reflog" ignored options like "--format=.." on the command line. + + * "git stash apply" used to refuse to work if there was any change in + the working tree, even when the change did not overlap with the change + the stash recorded. + + * "git stash apply @{99999}" was not diagnosed as an error, even when you + did not have that many stash entries. + + * An error message from "git send-email" to diagnose a broken SMTP + connection configuration lacked a space between "hello=<smtp-domain>" + and "port=<smtp-server-port>". + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.2.txt b/Documentation/RelNotes/1.7.5.2.txt new file mode 100644 index 0000000000..951eb7cb08 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.2.txt @@ -0,0 +1,57 @@ +Git v1.7.5.2 Release Notes +========================== + +The release notes to 1.7.5.1 forgot to mention: + + * "git stash -p --no-keep-index" and "git stash --no-keep-index -p" now + mean the same thing. + + * "git upload-pack" (hence "git push" over git native protocol) had a + subtle race condition that could lead to a deadlock. + +Fixes since v1.7.5.1 +-------------------- + + * "git add -p" did not work correctly when a hunk is split and then + one of them was given to the editor. + + * "git add -u" did not resolve a conflict where our history deleted and + their history modified the same file, and the working tree resolved to + keep a file. + + * "git cvsimport" did not know that CVSNT stores its password file in a + location different from the traditional CVS. + + * "git diff-files" did not show the mode information from the working + tree side of an unmerged path correctly. + + * "git diff -M --cached" used to use unmerged path as a possible rename + source candidate, which made no sense. + + * The option name parser in "git fast-import" used prefix matches for + some options where it shouldn't, and accepted non-existent options, + e.g. "--relative-marksmith" or "--forceps". + + * "git format-patch" did not quote RFC822 special characters in the + email address (e.g From: Junio C. Hamano <jch@example.com>, not + From: "Junio C. Hamano" <jch@example.com>). + + * "git format-patch" when run with "--quiet" option used to produce a + nonsense result that consists of alternating empty output. + + * In "git merge", per-branch branch.<name>.mergeoptions configuration + variables did not override the fallback default merge.<option> + configuration variables such as merge.ff, merge.log, etc. + + * "git merge-one-file" did not honor GIT_WORK_TREE settings when + handling a "both sides added, differently" conflict. + + * "git mergetool" did not handle conflicted submoudules gracefully. + + * "git-p4" (in contrib) used a wrong base image while merge a file that + was added on both branches differently. + + * "git rebase -i -p" failed to preserve the history when there is a + redundant merge created with the --no-ff option. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.3.txt b/Documentation/RelNotes/1.7.5.3.txt new file mode 100644 index 0000000000..9c03353af2 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.3.txt @@ -0,0 +1,32 @@ +Git v1.7.5.3 Release Notes +========================== + +Fixes since v1.7.5.2 +-------------------- + + * The bash completion scripts should correctly work using zsh's bash + completion emulation layer now. + + * Setting $(prefix) in config.mak did not affect where etc/gitconfig + file is read from, even though passing it from the command line of + $(MAKE) did. + + * The logic to handle "&" (expand to UNIX username) in GECOS field + miscounted the length of the name it formatted. + + * "git cherry-pick -s resolve" failed to cherry-pick a root commit. + + * "git diff --word-diff" misbehaved when diff.suppress-blank-empty was + in effect. + + * "git log --stdin path" with an input that has additional pathspec + used to corrupt memory. + + * "git send-pack" (hence "git push") over smalt-HTTP protocol could + deadlock when the client side pack-object died early. + + * Compressed tarball gitweb generates used to be made with the timestamp + of the tarball generation; this was bad because snapshot from the same + tree should result in a same tarball. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.6.txt b/Documentation/RelNotes/1.7.6.txt new file mode 100644 index 0000000000..3d5ff4d9b2 --- /dev/null +++ b/Documentation/RelNotes/1.7.6.txt @@ -0,0 +1,151 @@ +Git v1.7.6 Release Notes (draft) +======================== + +Updates since v1.7.5 +-------------------- + + * Various git-svn updates. + + * Updates the way content tags are handled in gitweb. + + * Similar to branch names, tagnames that begin with "-" are now + disallowed. + + * Clean-up of the C part of i18n (but not l10n---please wait) + continues. + + * The scripting part of the codebase is getting prepared for i18n/l10n. + + * Processes spawned by "[alias] <name> = !process" in the configuration + can inspect GIT_PREFIX environment variable to learn where in the + working tree the original command was invoked. + + * A magic pathspec ":/" tells a command that limits its operation to + the current directory when ran from a subdirectory to work on the + entire working tree. In general, ":/path/to/file" would be relative + to the root of the working tree hierarchy. + + After "git reset --hard; edit Makefile; cd t/", "git add -u" would + be a no-op, but "git add -u :/" would add the updated contents of + the Makefile at the top level. If you want to name a path in the + current subdirectory whose unusual name begins with ":/", you can + name it by "./:/that/path" or by "\:/that/path". + + * "git blame" learned "--abbrev[=<n>]" option to control the minimum + number of hexdigits shown for commit object names. + + * "git blame" learned "--line-porcelain" that is less efficient but is + easier to parse. + + * Aborting "git commit --interactive" discards updates to the index + made during the interctive session. + + * "git commit" learned a "--patch" option to directly jump to the + per-hunk selection UI of the interactive mode. + + * "git diff -C -C" used to disable the rename detection entirely when + there are too many copy candidate paths in the tree; now it falls + back to "-C" when doing so would keep the copy candidate paths + under the rename detection limit. + + * "git diff" and its family of commands learned --dirstat=0 to show + directories that contribute less than 0.1% of changes. + + * "git diff" and its family of commands learned --dirstat=lines mode to + assess damage to the directory based on number of lines in the patch + output, not based on the similarity numbers. + + * "git format-patch" learned "--quiet" option to suppress the output of + the names of generated files. + + * "git format-patch" quotes people's names when it has RFC822 special + characters in it, e.g. "Junio C. Hamano" <jch@example.com>. Earlier + it was up to the user to do this when using its output. + + * "git log" and friends learned a new "--notes" option to replace the + "--show-notes" option. Unlike "--show-notes", "--notes=<ref>" does + not imply showing the default notes. + + * "git ls-remote" learned "--exit-code" option to consider it a + different kind of error when no remote ref to be shown. + + * "git merge" learned "-" as a short-hand for "the previous branch", just + like the way "git checkout -" works. + + * "git merge" uses "merge.ff" configuration variable to decide to always + create a merge commit (i.e. --no-ff, aka merge.ff=no), refuse to create + a merge commit (i.e. --ff-only, aka merge.ff=only). Setting merge.ff=yes + (or not setting it at all) restores the default behaviour of allowing + fast-forward to happen when possible. + + * p4-import (from contrib) learned a new option --preserve-user. + + * "git rebase" that does not specify on top of which branch to rebase + the current branch now uses @{upstream} of the current branch. + + * "git rev-list --count" used with "--cherry-mark" counts the cherry-picked + commits separately, producing more a useful output. + + * "git submodule update" learned "--force" option to get rid of local + changes in submodules and replace them with the up-to-date version. + + * "git status" and friends ignore .gitmodules file while the file is + still in a conflicted state during a merge, to avoid using information + that is not final and possibly corrupt with conflict markers. + + * Compressed tarball gitweb generates is made without the timestamp of + the tarball generation; snapshot from the same tree should result in + a same tarball. + +Also contains various documentation updates and minor miscellaneous +changes. + + +Fixes since v1.7.5 +------------------ + +Unless otherwise noted, all the fixes in 1.7.5.X maintenance track are +included in this release. + + * Setting $(prefix) in config.mak did not affect where etc/gitconfig + file is read from, even though passing it from the command line of + $(MAKE) did. + (merge kk/maint-prefix-in-config-mak later) + + * The bash completion scripts should correctly work using zsh's bash + completion emulation layer now. + (merge fc/completion-zsh later) + + * The logic to handle "&" (expand to UNIX username) in GECOS field + miscounted the length of the name it formatted. + (merge rg/copy-gecos-username later) + + * The single-key mode of "git add -p" was easily fooled into thinking + that it was told to add everthing ('a') when up-arrow was pressed by + mistake. + (merge tr/add-i-no-escape later) + + * "git cherry-pick -s resolve" failed to cherry-pick a root commit. + (merge jk/cherry-pick-root-with-resolve later) + + * "git config" used to choke with an insanely long line. + (merge ef/maint-strbuf-init later) + + * "git diff --word-diff" misbehaved when diff.suppress-blank-empty was + in effect. + (merge jm/maint-diff-words-with-sbe later) + + * "git log --stdin path" with an input that has additional pathspec + used to corrupt memory. + (merge jc/maint-pathspec-stdin-and-cmdline later) + + * "git send-pack" (hence "git push") over smalt-HTTP protocol could + deadlock when the client side pack-object died early. + (merge js/maint-send-pack-stateless-rpc-deadlock-fix later) + (merge jk/git-connection-deadlock-fix later) + +--- +exec >/var/tmp/1 +echo O=$(git describe master) +O=v1.7.5.2-352-g4961210 +git shortlog --no-merges ^maint ^$O master diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index c6a5032912..938eccf2a5 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -344,50 +344,20 @@ MUA specific hints Some of patches I receive or pick up from the list share common patterns of breakage. Please make sure your MUA is set up -properly not to corrupt whitespaces. Here are two common ones -I have seen: +properly not to corrupt whitespaces. -* Empty context lines that do not have _any_ whitespace. +See the DISCUSSION section of git-format-patch(1) for hints on +checking your patch by mailing it to yourself and applying with +git-am(1). -* Non empty context lines that have one extra whitespace at the - beginning. - -One test you could do yourself if your MUA is set up correctly is: - -* Send the patch to yourself, exactly the way you would, except - To: and Cc: lines, which would not contain the list and - maintainer address. - -* Save that patch to a file in UNIX mailbox format. Call it say - a.patch. - -* Try to apply to the tip of the "master" branch from the - git.git public repository: - - $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply - $ git checkout test-apply - $ git reset --hard - $ git am a.patch - -If it does not apply correctly, there can be various reasons. - -* Your patch itself does not apply cleanly. That is _bad_ but - does not have much to do with your MUA. Please rebase the - patch appropriately. - -* Your MUA corrupted your patch; "am" would complain that - the patch does not apply. Look at .git/rebase-apply/ subdirectory and - see what 'patch' file contains and check for the common - corruption patterns mentioned above. - -* While you are at it, check what are in 'info' and - 'final-commit' files as well. If what is in 'final-commit' is - not exactly what you would want to see in the commit log - message, it is very likely that your maintainer would end up - hand editing the log message when he applies your patch. - Things like "Hi, this is my first patch.\n", if you really - want to put in the patch e-mail, should come after the - three-dash line that signals the end of the commit message. +While you are at it, check the resulting commit log message from +a trial run of applying the patch. If what is in the resulting +commit is not exactly what you would want to see, it is very +likely that your maintainer would end up hand editing the log +message when he applies your patch. Things like "Hi, this is my +first patch.\n", if you really want to put in the patch e-mail, +should come after the three-dash line that signals the end of the +commit message. Pine @@ -443,89 +413,10 @@ that or Gentoo did it.) So you need to set the it. -Thunderbird ------------ - -(A Large Angry SCM) - -By default, Thunderbird will both wrap emails as well as flag them as -being 'format=flowed', both of which will make the resulting email unusable -by git. - -Here are some hints on how to successfully submit patches inline using -Thunderbird. - -There are two different approaches. One approach is to configure -Thunderbird to not mangle patches. The second approach is to use -an external editor to keep Thunderbird from mangling the patches. - -Approach #1 (configuration): - -This recipe is current as of Thunderbird 2.0.0.19. Three steps: - 1. Configure your mail server composition as plain text - Edit...Account Settings...Composition & Addressing, - uncheck 'Compose Messages in HTML'. - 2. Configure your general composition window to not wrap - Edit..Preferences..Composition, wrap plain text messages at 0 - 3. Disable the use of format=flowed - Edit..Preferences..Advanced..Config Editor. Search for: - mailnews.send_plaintext_flowed - toggle it to make sure it is set to 'false'. - -After that is done, you should be able to compose email as you -otherwise would (cut + paste, git-format-patch | git-imap-send, etc), -and the patches should not be mangled. - -Approach #2 (external editor): - -This recipe appears to work with the current [*1*] Thunderbird from Suse. - -The following Thunderbird extensions are needed: - AboutConfig 0.5 - http://aboutconfig.mozdev.org/ - External Editor 0.7.2 - http://globs.org/articles.php?lng=en&pg=8 - -1) Prepare the patch as a text file using your method of choice. - -2) Before opening a compose window, use Edit->Account Settings to -uncheck the "Compose messages in HTML format" setting in the -"Composition & Addressing" panel of the account to be used to send the -patch. [*2*] - -3) In the main Thunderbird window, _before_ you open the compose window -for the patch, use Tools->about:config to set the following to the -indicated values: - mailnews.send_plaintext_flowed => false - mailnews.wraplength => 0 - -4) Open a compose window and click the external editor icon. - -5) In the external editor window, read in the patch file and exit the -editor normally. - -6) Back in the compose window: Add whatever other text you wish to the -message, complete the addressing and subject fields, and press send. - -7) Optionally, undo the about:config/account settings changes made in -steps 2 & 3. +Thunderbird, KMail, GMail +------------------------- - -[Footnotes] -*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse -9.3 professional updates. - -*2* It may be possible to do this with about:config and the following -settings but I haven't tried, yet. - mail.html_compose => false - mail.identity.default.compose_html => false - mail.identity.id?.compose_html => false - -(Lukas Sandström) - -There is a script in contrib/thunderbird-patch-inline which can help -you include patches with Thunderbird in an easy way. To use it, do the -steps above and then use the script as the external editor. +See the MUA-SPECIFIC HINTS section of git-format-patch(1). Gnus ---- @@ -540,71 +431,3 @@ characters (most notably in people's names), and also whitespaces (fatal in patches). Running 'C-u g' to display the message in raw form before using '|' to run the pipe can work this problem around. - - -KMail ------ - -This should help you to submit patches inline using KMail. - -1) Prepare the patch as a text file. - -2) Click on New Mail. - -3) Go under "Options" in the Composer window and be sure that -"Word wrap" is not set. - -4) Use Message -> Insert file... and insert the patch. - -5) Back in the compose window: add whatever other text you wish to the -message, complete the addressing and subject fields, and press send. - - -Gmail ------ - -GMail does not appear to have any way to turn off line wrapping in the web -interface, so this will mangle any emails that you send. You can however -use "git send-email" and send your patches through the GMail SMTP server, or -use any IMAP email client to connect to the google IMAP server and forward -the emails through that. - -To use "git send-email" and send your patches through the GMail SMTP server, -edit ~/.gitconfig to specify your account settings: - -[sendemail] - smtpencryption = tls - smtpserver = smtp.gmail.com - smtpuser = user@gmail.com - smtppass = p4ssw0rd - smtpserverport = 587 - -Once your commits are ready to be sent to the mailing list, run the -following commands: - - $ git format-patch --cover-letter -M origin/master -o outgoing/ - $ edit outgoing/0000-* - $ git send-email outgoing/* - -To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your -account settings: - -[imap] - folder = "[Gmail]/Drafts" - host = imaps://imap.gmail.com - user = user@gmail.com - pass = p4ssw0rd - port = 993 - sslverify = false - -You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error -that the "Folder doesn't exist". - -Once your commits are ready to be sent to the mailing list, run the -following commands: - - $ git format-patch --cover-letter -M --stdout origin/master | git imap-send - -Just make sure to disable line wrapping in the email client (GMail web -interface will line wrap no matter what, so you need to use a real -IMAP client). diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 16e3c68576..e76195ac97 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -52,6 +52,11 @@ of lines before or after the line given by <start>. --porcelain:: Show in a format designed for machine consumption. +--line-porcelain:: + Show the porcelain format, but output commit information for + each line, not just the first time a commit is referenced. + Implies --porcelain. + --incremental:: Show the result incrementally in a format designed for machine consumption. diff --git a/Documentation/config.txt b/Documentation/config.txt index 750c86d4f5..6b93777199 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -442,8 +442,6 @@ for most projects as source code and other text files can still be delta compressed, but larger binary media files won't be. + Common unit suffixes of 'k', 'm', or 'g' are supported. -+ -Currently only linkgit:git-fast-import[1] honors this setting. core.excludesfile:: In addition to '.gitignore' (per-directory) and @@ -589,6 +587,8 @@ it will be treated as a shell command. For example, defining "gitk --all --not ORIG_HEAD". Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. +'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' +from the original current directory. See linkgit:git-rev-parse[1]. am.keepcr:: If true, git-am will call git-mailsplit for patches in mbox format @@ -643,7 +643,7 @@ branch.<name>.remote:: branch.<name>.merge:: Defines, together with branch.<name>.remote, the upstream branch - for the given branch. It tells 'git fetch'/'git pull' which + for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which branch to merge and can also affect 'git push' (see push.default). When in branch <name>, it tells 'git fetch' the default refspec to be marked for merging in FETCH_HEAD. The value is @@ -708,9 +708,16 @@ second is the background. The position of the attribute, if any, doesn't matter. color.diff:: - When set to `always`, always use colors in patch. - When false (or `never`), never. When set to `true` or `auto`, use - colors only when the output is to the terminal. Defaults to false. + Whether to use ANSI escape sequences to add color to patches. + If this is set to `always`, linkgit:git-diff[1], + linkgit:git-log[1], and linkgit:git-show[1] will use color + for all patches. If it is set to `true` or `auto`, those + commands will only use color when output is to the terminal. + Defaults to false. ++ +This does not affect linkgit:git-format-patch[1] nor the +'git-diff-{asterisk}' plumbing commands. Can be overridden on the +command line with the `--color[=<when>]` option. color.diff.<slot>:: Use customized color for diff colorization. `<slot>` specifies @@ -796,11 +803,15 @@ color.status.<slot>:: color.branch.<slot>. color.ui:: - When set to `always`, always use colors in all git commands which - are capable of colored output. When false (or `never`), never. When - set to `true` or `auto`, use colors only when the output is to the - terminal. When more specific variables of color.* are set, they always - take precedence over this setting. Defaults to false. + This variable determines the default value for variables such + as `color.diff` and `color.grep` that control the use of color + per command family. Its scope will expand as more commands learn + configuration to set a default for the `--color` option. Set it + to `always` if you want all output not intended for machine + consumption to use color, to `true` or `auto` if you want such + output to use color when written to the terminal, or to `false` or + `never` if you prefer git commands not to use color unless enabled + explicitly with some other configuration or the `--color` option. commit.status:: A boolean to enable/disable inclusion of status information in the @@ -812,68 +823,7 @@ commit.template:: "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the specified user's home directory. -diff.autorefreshindex:: - When using 'git diff' to compare with work tree - files, do not consider stat-only change as changed. - Instead, silently run `git update-index --refresh` to - update the cached stat information for paths whose - contents in the work tree match the contents in the - index. This option defaults to true. Note that this - affects only 'git diff' Porcelain, and not lower level - 'diff' commands such as 'git diff-files'. - -diff.external:: - If this config variable is set, diff generation is not - performed using the internal diff machinery, but using the - given command. Can be overridden with the `GIT_EXTERNAL_DIFF' - environment variable. The command is called with parameters - as described under "git Diffs" in linkgit:git[1]. Note: if - you want to use an external diff program only on a subset of - your files, you might want to use linkgit:gitattributes[5] instead. - -diff.mnemonicprefix:: - If set, 'git diff' uses a prefix pair that is different from the - standard "a/" and "b/" depending on what is being compared. When - this configuration is in effect, reverse diff output also swaps - the order of the prefixes: -`git diff`;; - compares the (i)ndex and the (w)ork tree; -`git diff HEAD`;; - compares a (c)ommit and the (w)ork tree; -`git diff --cached`;; - compares a (c)ommit and the (i)ndex; -`git diff HEAD:file1 file2`;; - compares an (o)bject and a (w)ork tree entity; -`git diff --no-index a b`;; - compares two non-git things (1) and (2). - -diff.noprefix:: - If set, 'git diff' does not show any source or destination prefix. - -diff.renameLimit:: - The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option '-l'. - -diff.renames:: - Tells git to detect renames. If set to any boolean value, it - will enable basic rename detection. If set to "copies" or - "copy", it will detect copies, as well. - -diff.ignoreSubmodules:: - Sets the default value of --ignore-submodules. Note that this - affects only 'git diff' Porcelain, and not lower level 'diff' - commands such as 'git diff-files'. 'git checkout' also honors - this setting when reporting uncommitted changes. - -diff.suppressBlankEmpty:: - A boolean to inhibit the standard behavior of printing a space - before each empty output line. Defaults to false. - -diff.tool:: - Controls which diff tool is used. `diff.tool` overrides - `merge.tool` when used by linkgit:git-difftool[1] and has - the same valid values as `merge.tool` minus "tortoisemerge" - and plus "kompare". +include::diff-config.txt[] difftool.<tool>.path:: Override the path for the given tool. This is useful in case @@ -977,6 +927,16 @@ format.signoff:: the rights to submit this work under the same open source license. Please see the 'SubmittingPatches' document for further discussion. +filter.<driver>.clean:: + The command which is used to convert the content of a worktree + file to a blob upon checkin. See linkgit:gitattributes[5] for + details. + +filter.<driver>.smudge:: + The command which is used to convert the content of a blob + object to a worktree file upon checkout. See + linkgit:gitattributes[5] for details. + gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults @@ -1349,9 +1309,16 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used only by the `\--patch` mode of - linkgit:git-add[1]. Note that this setting is silently - ignored if portable keystroke input is not available. + Currently this is used by the `\--patch` mode of + linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], + linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this + setting is silently ignored if portable keystroke input + is not available. + +log.abbrevCommit:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may + override this option with `\--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt new file mode 100644 index 0000000000..1aed79e7dc --- /dev/null +++ b/Documentation/diff-config.txt @@ -0,0 +1,136 @@ +diff.autorefreshindex:: + When using 'git diff' to compare with work tree + files, do not consider stat-only change as changed. + Instead, silently run `git update-index --refresh` to + update the cached stat information for paths whose + contents in the work tree match the contents in the + index. This option defaults to true. Note that this + affects only 'git diff' Porcelain, and not lower level + 'diff' commands such as 'git diff-files'. + +diff.dirstat:: + A comma separated list of `--dirstat` parameters specifying the + default behavior of the `--dirstat` option to linkgit:git-diff[1]` + and friends. The defaults can be overridden on the command line + (using `--dirstat=<param1,param2,...>`). The fallback defaults + (when not changed by `diff.dirstat`) are `changes,noncumulative,3`. + The following parameters are available: ++ +-- +`changes`;; + Compute the dirstat numbers by counting the lines that have been + removed from the source, or added to the destination. This ignores + the amount of pure code movements within a file. In other words, + rearranging lines in a file is not counted as much as other changes. + This is the default behavior when no parameter is given. +`lines`;; + Compute the dirstat numbers by doing the regular line-based diff + analysis, and summing the removed/added line counts. (For binary + files, count 64-byte chunks instead, since binary files have no + natural concept of lines). This is a more expensive `--dirstat` + behavior than the `changes` behavior, but it does count rearranged + lines within a file as much as other changes. The resulting output + is consistent with what you get from the other `--*stat` options. +`files`;; + Compute the dirstat numbers by counting the number of files changed. + Each changed file counts equally in the dirstat analysis. This is + the computationally cheapest `--dirstat` behavior, since it does + not have to look at the file contents at all. +`cumulative`;; + Count changes in a child directory for the parent directory as well. + Note that when using `cumulative`, the sum of the percentages + reported may exceed 100%. The default (non-cumulative) behavior can + be specified with the `noncumulative` parameter. +<limit>;; + An integer parameter specifies a cut-off percent (3% by default). + Directories contributing less than this percentage of the changes + are not shown in the output. +-- ++ +Example: The following will count changed files, while ignoring +directories with less than 10% of the total amount of changed files, +and accumulating child directory counts in the parent directories: +`files,10,cumulative`. + +diff.external:: + If this config variable is set, diff generation is not + performed using the internal diff machinery, but using the + given command. Can be overridden with the `GIT_EXTERNAL_DIFF' + environment variable. The command is called with parameters + as described under "git Diffs" in linkgit:git[1]. Note: if + you want to use an external diff program only on a subset of + your files, you might want to use linkgit:gitattributes[5] instead. + +diff.ignoreSubmodules:: + Sets the default value of --ignore-submodules. Note that this + affects only 'git diff' Porcelain, and not lower level 'diff' + commands such as 'git diff-files'. 'git checkout' also honors + this setting when reporting uncommitted changes. + +diff.mnemonicprefix:: + If set, 'git diff' uses a prefix pair that is different from the + standard "a/" and "b/" depending on what is being compared. When + this configuration is in effect, reverse diff output also swaps + the order of the prefixes: +`git diff`;; + compares the (i)ndex and the (w)ork tree; +`git diff HEAD`;; + compares a (c)ommit and the (w)ork tree; +`git diff --cached`;; + compares a (c)ommit and the (i)ndex; +`git diff HEAD:file1 file2`;; + compares an (o)bject and a (w)ork tree entity; +`git diff --no-index a b`;; + compares two non-git things (1) and (2). + +diff.noprefix:: + If set, 'git diff' does not show any source or destination prefix. + +diff.renameLimit:: + The number of files to consider when performing the copy/rename + detection; equivalent to the 'git diff' option '-l'. + +diff.renames:: + Tells git to detect renames. If set to any boolean value, it + will enable basic rename detection. If set to "copies" or + "copy", it will detect copies, as well. + +diff.suppressBlankEmpty:: + A boolean to inhibit the standard behavior of printing a space + before each empty output line. Defaults to false. + +diff.<driver>.command:: + The custom diff driver command. See linkgit:gitattributes[5] + for details. + +diff.<driver>.xfuncname:: + The regular expression that the diff driver should use to + recognize the hunk header. A built-in pattern may also be used. + See linkgit:gitattributes[5] for details. + +diff.<driver>.binary:: + Set this option to true to make the diff driver treat files as + binary. See linkgit:gitattributes[5] for details. + +diff.<driver>.textconv:: + The command that the diff driver should call to generate the + text-converted version of a file. The result of the + conversion is used to generate a human-readable diff. See + linkgit:gitattributes[5] for details. + +diff.<driver>.wordregex:: + The regular expression that the diff driver should use to + split words in a line. See linkgit:gitattributes[5] for + details. + +diff.<driver>.cachetextconv:: + Set this option to true to make the diff driver cache the text + conversion outputs. See linkgit:gitattributes[5] for details. + +diff.tool:: + The diff tool to be used by linkgit:git-difftool[1]. This + option overrides `merge.tool`, and has the same valid built-in + values as `merge.tool` minus "tortoisemerge" and plus + "kompare". Any other value is treated as a custom diff tool, + and there must be a corresponding `difftool.<tool>.cmd` + option. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index c93124be79..c7ed946357 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -66,15 +66,49 @@ endif::git-format-patch[] number of modified files, as well as number of added and deleted lines. ---dirstat[=<limit>]:: - Output the distribution of relative amount of changes (number of lines added or - removed) for each sub-directory. Directories with changes below - a cut-off percent (3% by default) are not shown. The cut-off percent - can be set with `--dirstat=<limit>`. Changes in a child directory are not - counted for the parent directory, unless `--cumulative` is used. - ---dirstat-by-file[=<limit>]:: - Same as `--dirstat`, but counts changed files instead of lines. +--dirstat[=<param1,param2,...>]:: + Output the distribution of relative amount of changes for each + sub-directory. The behavior of `--dirstat` can be customized by + passing it a comma separated list of parameters. + The defaults are controlled by the `diff.dirstat` configuration + variable (see linkgit:git-config[1]). + The following parameters are available: ++ +-- +`changes`;; + Compute the dirstat numbers by counting the lines that have been + removed from the source, or added to the destination. This ignores + the amount of pure code movements within a file. In other words, + rearranging lines in a file is not counted as much as other changes. + This is the default behavior when no parameter is given. +`lines`;; + Compute the dirstat numbers by doing the regular line-based diff + analysis, and summing the removed/added line counts. (For binary + files, count 64-byte chunks instead, since binary files have no + natural concept of lines). This is a more expensive `--dirstat` + behavior than the `changes` behavior, but it does count rearranged + lines within a file as much as other changes. The resulting output + is consistent with what you get from the other `--*stat` options. +`files`;; + Compute the dirstat numbers by counting the number of files changed. + Each changed file counts equally in the dirstat analysis. This is + the computationally cheapest `--dirstat` behavior, since it does + not have to look at the file contents at all. +`cumulative`;; + Count changes in a child directory for the parent directory as well. + Note that when using `cumulative`, the sum of the percentages + reported may exceed 100%. The default (non-cumulative) behavior can + be specified with the `noncumulative` parameter. +<limit>;; + An integer parameter specifies a cut-off percent (3% by default). + Directories contributing less than this percentage of the changes + are not shown in the output. +-- ++ +Example: The following will count changed files, while ignoring +directories with less than 10% of the total amount of changed files, +and accumulating child directory counts in the parent directories: +`--dirstat=files,10,cumulative`. --summary:: Output a condensed summary of extended header information @@ -120,12 +154,19 @@ any of those replacements occurred. --color[=<when>]:: Show colored diff. - The value must be always (the default), never, or auto. + The value must be `always` (the default for `<when>`), `never`, or `auto`. + The default value is `never`. +ifdef::git-diff[] + It can be changed by the `color.ui` and `color.diff` + configuration settings. +endif::git-diff[] --no-color:: - Turn off colored diff, even when the configuration file - gives the default to color output. - Same as `--color=never`. + Turn off colored diff. +ifdef::git-diff[] + This can be used to override configuration settings. +endif::git-diff[] + It is the same as `--color=never`. --word-diff[=<mode>]:: Show a word diff, using the <mode> to delimit changed words. @@ -239,7 +280,7 @@ ifdef::git-log[] For following files across renames while traversing history, see `--follow`. endif::git-log[] - If `n` is specified, it is a is a threshold on the similarity + If `n` is specified, it is a threshold on the similarity index (i.e. amount of addition/deletions compared to the file's size). For example, `-M90%` means git should consider a delete/add pair to be a rename if more than 90% of the file @@ -259,6 +300,19 @@ endif::git-log[] projects, so use it with caution. Giving more than one `-C` option has the same effect. +-D:: +--irreversible-delete:: + Omit the preimage for deletes, i.e. print only the header but not + the diff between the preimage and `/dev/null`. The resulting patch + is not meant to be applied with `patch` nor `git apply`; this is + solely for people who want to just concentrate on reviewing the + text after the change. In addition, the output obviously lack + enough information to apply such a patch in reverse, even manually, + hence the name of the option. ++ +When used together with `-B`, omit also the preimage in the deletion part +of a delete/create pair. + -l<num>:: The `-M` and `-C` options require O(n^2) processing time where n is the number of potential rename/copy targets. This diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 7eebbefe7b..9c1d395722 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -134,6 +134,8 @@ subdirectories. If some files could not be added because of errors indexing them, do not abort the operation, but continue adding the others. The command shall still exit with non-zero status. + The configuration variable `add.ignoreErrors` can be set to + true to make this the default behaviour. --ignore-missing:: This option can only be used together with --dry-run. By using @@ -272,7 +274,8 @@ patch:: This lets you choose one path out of a 'status' like selection. After choosing the path, it presents the diff between the index and the working tree file and asks you if you want to stage - the change of each hunk. You can say: + the change of each hunk. You can select one of the following + options and type return: y - stage this hunk n - do not stage this hunk @@ -291,6 +294,9 @@ patch:: + After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated with the selected hunks. ++ +You can omit having to type return here, by setting the configuration +variable `interactive.singlekey` to `true`. diff:: diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index c4d1ff86c9..9516914236 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] [-L n,m] - [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] + [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file> DESCRIPTION @@ -73,6 +73,11 @@ include::blame-options.txt[] Ignore whitespace when comparing the parent's version and the child's to find where the lines came from. +--abbrev=<n>:: + Instead of using the default 7+1 hexadecimal digits as the + abbreviated object name, use <n>+1 digits. Note that 1 column + is used for a caret to mark the boundary commit. + THE PORCELAIN FORMAT -------------------- @@ -100,6 +105,19 @@ The contents of the actual line is output after the above header, prefixed by a TAB. This is to allow adding more header elements later. +The porcelain format generally suppresses commit information that has +already been seen. For example, two lines that are blamed to the same +commit will both be shown, but the details for that commit will be shown +only once. This is more efficient, but may require more state be kept by +the reader. The `--line-porcelain` option can be used to output full +commit information for each line, allowing simpler (but less efficient) +usage like: + + # count the number of lines attributed to each author + git blame --line-porcelain file | + sed -n 's/^author //p' | + sort | uniq -c | sort -rn + SPECIFYING RANGES ----------------- diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 1063f69023..c0a96e6c1e 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git checkout' [-q] [-f] [-m] [--detach] [<commit>] 'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... -'git checkout' --patch [<tree-ish>] [--] [<paths>...] +'git checkout' [-p|--patch] [<tree-ish>] [--] [<paths>...] DESCRIPTION ----------- @@ -45,7 +45,7 @@ $ git checkout <branch> that is to say, the branch is not reset/created unless "git checkout" is successful. -'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: +'git checkout' [-p|--patch] [<tree-ish>] [--] <pathspec>...:: When <paths> or `--patch` are given, 'git checkout' does *not* switch branches. It updates the named paths in the working tree @@ -183,7 +183,8 @@ the conflicted merge in the specified paths. working tree (and if a <tree-ish> was specified, the index). + This means that you can use `git checkout -p` to selectively discard -edits from your current working tree. +edits from your current working tree. See the ``Interactive Mode'' +section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 01db83039f..9d8fe0d261 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -51,9 +51,10 @@ OPTIONS message prior to committing. -x:: - When recording the commit, append to the original commit - message a note that indicates which commit this change - was cherry-picked from. Append the note only for cherry + When recording the commit, append a line that says + "(cherry picked from commit ...)" to the original commit + message in order to indicate which commit this change was + cherry-picked from. This is done only for cherry picks without conflicts. Do not use this option if you are cherry-picking from your private branch because the information is useless to the recipient. If on the diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 86eb4c9368..b093e45497 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git clone' [--template=<template_directory>] [-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] [--mirror] [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] - [--separate-git-dir|-L <git dir>] + [--separate-git-dir <git dir>] [--depth <depth>] [--recursive|--recurse-submodules] [--] <repository> [<directory>] @@ -177,7 +177,6 @@ objects from the source repository into a pack in the cloned repository. repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) --L=<git dir>:: --separate-git-dir=<git dir>:: Instead of placing the cloned repository where it is supposed to be, place the cloned repository at the specified directory, diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index d0534b8c05..7951cb7b00 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -8,11 +8,12 @@ git-commit - Record changes to the repository SYNOPSIS -------- [verse] -'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run] - [(-c | -C | --fixup | --squash) <commit>] [-F <file> | -m <msg>] - [--reset-author] [--allow-empty] [--allow-empty-message] [--no-verify] - [-e] [--author=<author>] [--date=<date>] [--cleanup=<mode>] - [--status | --no-status] [-i | -o] [--] [<file>...] +'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend] + [--dry-run] [(-c | -C | --fixup | --squash) <commit>] + [-F <file> | -m <msg>] [--reset-author] [--allow-empty] + [--allow-empty-message] [--no-verify] [-e] [--author=<author>] + [--date=<date>] [--cleanup=<mode>] [--status | --no-status] + [-i | -o] [--] [<file>...] DESCRIPTION ----------- @@ -39,9 +40,10 @@ The content to be added can be specified in several ways: that have been removed from the working tree, and then perform the actual commit; -5. by using the --interactive switch with the 'commit' command to decide one - by one which files should be part of the commit, before finalizing the - operation. Currently, this is done by invoking 'git add --interactive'. +5. by using the --interactive or --patch switches with the 'commit' command + to decide one by one which files or hunks should be part of the commit, + before finalizing the operation. See the ``Interactive Mode`` section of + linkgit:git-add[1] to learn how to operate these modes. The `--dry-run` option can be used to obtain a summary of what is included by any of the above for the next @@ -59,6 +61,12 @@ OPTIONS been modified and deleted, but new files you have not told git about are not affected. +-p:: +--patch:: + Use the interactive patch selection interface to chose + which changes to commit. See linkgit:git-add[1] for + details. + -C <commit>:: --reuse-message=<commit>:: Take an existing commit object, and reuse the log message diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 8804de327f..e7ecf5d803 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -50,16 +50,18 @@ The default is to assume the config file of the current repository, .git/config unless defined otherwise with GIT_DIR and GIT_CONFIG (see <<FILES>>). -This command will fail if: - -. The config file is invalid, -. Can not write to the config file, -. no section was provided, -. the section or key is invalid, -. you try to unset an option which does not exist, -. you try to unset/set an option for which multiple lines match, or -. you use '--global' option without $HOME being properly set. - +This command will fail (with exit code ret) if: + +. The config file is invalid (ret=3), +. can not write to the config file (ret=4), +. no section or name was provided (ret=2), +. the section or key is invalid (ret=1), +. you try to unset an option which does not exist (ret=5), +. you try to unset/set an option for which multiple lines match (ret=5), +. you try to use an invalid regexp (ret=6), or +. you use '--global' option without $HOME being properly set (ret=128). + +On success, the command returns the exit code 0. OPTIONS ------- diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 2c2ea12c5c..249249aac7 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -83,7 +83,7 @@ OPTIONS skips the file if it does not exist. --relative-marks:: - After specifying --relative-marks= the paths specified + After specifying --relative-marks the paths specified with --import-marks= and --export-marks= are relative to an internal directory in the current repository. In git-fast-import this means that the paths are relative @@ -93,7 +93,7 @@ OPTIONS --no-relative-marks:: Negates a previous --relative-marks. Allows for combining relative and non-relative marks by interweaving - --(no-)-relative-marks= with the --(import|export)-marks= + --(no-)-relative-marks with the --(import|export)-marks= options. --cat-blob-fd=<fd>:: diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index a5525e9aa8..d13c9b23f7 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -20,7 +20,7 @@ SYNOPSIS [--ignore-if-in-upstream] [--subject-prefix=Subject-Prefix] [--to=<email>] [--cc=<email>] - [--cover-letter] + [--cover-letter] [--quiet] [<common diff options>] [ <since> | <revision range> ] @@ -196,6 +196,9 @@ will want to ensure that threading is disabled for `git send-email`. Note that the leading character does not have to be a dot; for example, you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. +--quiet:: + Do not print the names of the generated files to standard output. + --no-binary:: Do not output contents of changes in binary files, instead display a notice that those files changed. Patches generated @@ -229,6 +232,233 @@ attachments, and sign off patches with configuration variables. ------------ +DISCUSSION +---------- + +The patch produced by 'git format-patch' is in UNIX mailbox format, +with a fixed "magic" time stamp to indicate that the file is output +from format-patch rather than a real mailbox, like so: + +------------ +From 8f72bad1baf19a53459661343e21d6491c3908d3 Mon Sep 17 00:00:00 2001 +From: Tony Luck <tony.luck@intel.com> +Date: Tue, 13 Jul 2010 11:42:54 -0700 +Subject: [PATCH] =?UTF-8?q?[IA64]=20Put=20ia64=20config=20files=20on=20the=20?= + =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig=20diet?= +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +arch/arm config files were slimmed down using a python script +(See commit c2330e286f68f1c408b4aa6515ba49d57f05beae comment) + +Do the same for ia64 so we can have sleek & trim looking +... +------------ + +Typically it will be placed in a MUA's drafts folder, edited to add +timely commentary that should not go in the changelog after the three +dashes, and then sent as a message whose body, in our example, starts +with "arch/arm config files were...". On the receiving end, readers +can save interesting patches in a UNIX mailbox and apply them with +linkgit:git-am[1]. + +When a patch is part of an ongoing discussion, the patch generated by +'git format-patch' can be tweaked to take advantage of the 'git am +--scissors' feature. After your response to the discussion comes a +line that consists solely of "`-- >8 --`" (scissors and perforation), +followed by the patch with unnecessary header fields removed: + +------------ +... +> So we should do such-and-such. + +Makes sense to me. How about this patch? + +-- >8 -- +Subject: [IA64] Put ia64 config files on the Uwe Kleine-König diet + +arch/arm config files were slimmed down using a python script +... +------------ + +When sending a patch this way, most often you are sending your own +patch, so in addition to the "`From $SHA1 $magic_timestamp`" marker you +should omit `From:` and `Date:` lines from the patch file. The patch +title is likely to be different from the subject of the discussion the +patch is in response to, so it is likely that you would want to keep +the Subject: line, like the example above. + +Checking for patch corruption +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Many mailers if not set up properly will corrupt whitespace. Here are +two common types of corruption: + +* Empty context lines that do not have _any_ whitespace. + +* Non-empty context lines that have one extra whitespace at the + beginning. + +One way to test if your MUA is set up correctly is: + +* Send the patch to yourself, exactly the way you would, except + with To: and Cc: lines that do not contain the list and + maintainer address. + +* Save that patch to a file in UNIX mailbox format. Call it a.patch, + say. + +* Apply it: + + $ git fetch <project> master:test-apply + $ git checkout test-apply + $ git reset --hard + $ git am a.patch + +If it does not apply correctly, there can be various reasons. + +* The patch itself does not apply cleanly. That is _bad_ but + does not have much to do with your MUA. You might want to rebase + the patch with linkgit:git-rebase[1] before regenerating it in + this case. + +* The MUA corrupted your patch; "am" would complain that + the patch does not apply. Look in the .git/rebase-apply/ subdirectory and + see what 'patch' file contains and check for the common + corruption patterns mentioned above. + +* While at it, check the 'info' and 'final-commit' files as well. + If what is in 'final-commit' is not exactly what you would want to + see in the commit log message, it is very likely that the + receiver would end up hand editing the log message when applying + your patch. Things like "Hi, this is my first patch.\n" in the + patch e-mail should come after the three-dash line that signals + the end of the commit message. + +MUA-SPECIFIC HINTS +------------------ +Here are some hints on how to successfully submit patches inline using +various mailers. + +GMail +~~~~~ +GMail does not have any way to turn off line wrapping in the web +interface, so it will mangle any emails that you send. You can however +use "git send-email" and send your patches through the GMail SMTP server, or +use any IMAP email client to connect to the google IMAP server and forward +the emails through that. + +For hints on using 'git send-email' to send your patches through the +GMail SMTP server, see the EXAMPLE section of linkgit:git-send-email[1]. + +For hints on submission using the IMAP interface, see the EXAMPLE +section of linkgit:git-imap-send[1]. + +Thunderbird +~~~~~~~~~~~ +By default, Thunderbird will both wrap emails as well as flag +them as being 'format=flowed', both of which will make the +resulting email unusable by git. + +There are three different approaches: use an add-on to turn off line wraps, +configure Thunderbird to not mangle patches, or use +an external editor to keep Thunderbird from mangling the patches. + +Approach #1 (add-on) +^^^^^^^^^^^^^^^^^^^^ + +Install the Toggle Word Wrap add-on that is available from +https://addons.mozilla.org/thunderbird/addon/toggle-word-wrap/ +It adds a menu entry "Enable Word Wrap" in the composer's "Options" menu +that you can tick off. Now you can compose the message as you otherwise do +(cut + paste, 'git format-patch' | 'git imap-send', etc), but you have to +insert line breaks manually in any text that you type. + +Approach #2 (configuration) +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Three steps: + +1. Configure your mail server composition as plain text: + Edit...Account Settings...Composition & Addressing, + uncheck "Compose Messages in HTML". + +2. Configure your general composition window to not wrap. ++ +In Thunderbird 2: +Edit..Preferences..Composition, wrap plain text messages at 0 ++ +In Thunderbird 3: +Edit..Preferences..Advanced..Config Editor. Search for +"mail.wrap_long_lines". +Toggle it to make sure it is set to `false`. + +3. Disable the use of format=flowed: +Edit..Preferences..Advanced..Config Editor. Search for +"mailnews.send_plaintext_flowed". +Toggle it to make sure it is set to `false`. + +After that is done, you should be able to compose email as you +otherwise would (cut + paste, 'git format-patch' | 'git imap-send', etc), +and the patches will not be mangled. + +Approach #3 (external editor) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The following Thunderbird extensions are needed: +AboutConfig from http://aboutconfig.mozdev.org/ and +External Editor from http://globs.org/articles.php?lng=en&pg=8 + +1. Prepare the patch as a text file using your method of choice. + +2. Before opening a compose window, use Edit->Account Settings to + uncheck the "Compose messages in HTML format" setting in the + "Composition & Addressing" panel of the account to be used to + send the patch. + +3. In the main Thunderbird window, 'before' you open the compose + window for the patch, use Tools->about:config to set the + following to the indicated values: ++ +---------- + mailnews.send_plaintext_flowed => false + mailnews.wraplength => 0 +---------- + +4. Open a compose window and click the external editor icon. + +5. In the external editor window, read in the patch file and exit + the editor normally. + +Side note: it may be possible to do step 2 with +about:config and the following settings but no one's tried yet. + +---------- + mail.html_compose => false + mail.identity.default.compose_html => false + mail.identity.id?.compose_html => false +---------- + +There is a script in contrib/thunderbird-patch-inline which can help +you include patches with Thunderbird in an easy way. To use it, do the +steps above and then use the script as the external editor. + +KMail +~~~~~ +This should help you to submit patches inline using KMail. + +1. Prepare the patch as a text file. + +2. Click on New Mail. + +3. Go under "Options" in the Composer window and be sure that + "Word wrap" is not set. + +4. Use Message -> Insert file... and insert the patch. + +5. Back in the compose window: add whatever other text you wish to the + message, complete the addressing and subject fields, and press send. + + EXAMPLES -------- diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index c9ede794b0..a2a508dc28 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -26,7 +26,7 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless --no-reflogs is given) as heads. --unreachable:: - Print out objects that exist but that aren't readable from any + Print out objects that exist but that aren't reachable from any of the reference nodes. --root:: @@ -76,7 +76,7 @@ It tests SHA1 and general object sanity, and it does full tracking of the resulting reachability and everything else. It prints out any corruption it finds (missing or bad objects), and if you use the '--unreachable' flag it will also print out objects that exist but -that aren't readable from any of the specified head nodes. +that aren't reachable from any of the specified head nodes. So for example diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index d3013d6a29..4e09708cc9 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -111,6 +111,31 @@ Using direct mode with SSL: .......................... +EXAMPLE +------- +To submit patches using GMail's IMAP interface, first, edit your ~/.gitconfig +to specify your account settings: + +--------- +[imap] + folder = "[Gmail]/Drafts" + host = imaps://imap.gmail.com + user = user@gmail.com + port = 993 + sslverify = false +--------- + +You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error +that the "Folder doesn't exist". + +Once the commits are ready to be sent, run the following command: + + $ git format-patch --cover-letter -M --stdout origin/master | git imap-send + +Just make sure to disable line wrapping in the email client (GMail's web +interface will wrap lines no matter what, so you need to use a real +IMAP client). + CAUTION ------- It is still your responsibility to make sure that the email message @@ -124,6 +149,10 @@ Thunderbird in particular is known to be problematic. Thunderbird users may wish to visit this web page for more information: http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email +SEE ALSO +-------- +linkgit:git-format-patch[1], linkgit:git-send-email[1], mbox(5) + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index 2c4c716f33..9f97f5a915 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -8,7 +8,7 @@ git-init-db - Creates an empty git repository SYNOPSIS -------- -'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] +'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--separate-git-dir <git dir>] [--shared[=<permissions>]] DESCRIPTION diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 58cd01145a..f2777a7786 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -9,7 +9,7 @@ git-init - Create an empty git repository or reinitialize an existing one SYNOPSIS -------- 'git init' [-q | --quiet] [--bare] [--template=<template_directory>] - [--separate-git-dir|-L <git dir>] + [--separate-git-dir <git dir>] [--shared[=<permissions>]] [directory] @@ -54,7 +54,6 @@ current working directory. Specify the directory from which templates will be used. (See the "TEMPLATE DIRECTORY" section below.) --L=<git dir>:: --separate-git-dir=<git dir>:: Instead of initializing the repository where it is supposed to be, diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 2c84028838..de5c0d37a5 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -178,9 +178,9 @@ May be an unabbreviated ref name or a glob and may be specified multiple times. A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. + -This setting can be disabled by the `--no-standard-notes` option, +This setting can be disabled by the `--no-notes` option, overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, -and supplemented by the `--show-notes` option. +and overridden by the `--notes=<ref>` option. GIT --- diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index c3df8c0ebe..7a9b86a58a 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git ls-remote' [--heads] [--tags] [-u <exec> | --upload-pack <exec>] - <repository> [<refs>...] + [--exit-code] <repository> [<refs>...] DESCRIPTION ----------- @@ -36,6 +36,12 @@ OPTIONS SSH and where the SSH daemon does not use the PATH configured by the user. +--exit-code:: + Exit with status "2" when no matching refs are found in the remote + repository. Usually the command exits with status "0" to indicate + it successfully talked with the remote repository, whether it + found any matching refs. + <repository>:: Location of the repository. The shorthand defined in $GIT_DIR/branches/ can be used. Use "." (dot) to list references in diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index ba36ec04f4..b295bf8330 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -9,7 +9,8 @@ git-merge-base - Find as good common ancestors as possible for a merge SYNOPSIS -------- [verse] -'git merge-base' [-a|--all] [--octopus] <commit> <commit>... +'git merge-base' [-a|--all] <commit> <commit>... +'git merge-base' [-a|--all] --octopus <commit>... 'git merge-base' --independent <commit>... DESCRIPTION @@ -22,23 +23,21 @@ that does not have any better common ancestor is a 'best common ancestor', i.e. a 'merge base'. Note that there can be more than one merge base for a pair of commits. -Unless `--octopus` is given, among the two commits to compute the merge -base from, one is specified by the first commit argument on the command -line; the other commit is a (possibly hypothetical) commit that is a merge -across all the remaining commits on the command line. As the most common -special case, specifying only two commits on the command line means -computing the merge base between the given two commits. +OPERATION MODE +-------------- + +As the most common special case, specifying only two commits on the +command line means computing the merge base between the given two commits. + +More generally, among the two commits to compute the merge base from, +one is specified by the first commit argument on the command line; +the other commit is a (possibly hypothetical) commit that is a merge +across all the remaining commits on the command line. As a consequence, the 'merge base' is not necessarily contained in each of the commit arguments if more than two commits are specified. This is different from linkgit:git-show-branch[1] when used with the `--merge-base` option. -OPTIONS -------- --a:: ---all:: - Output all merge bases for the commits, instead of just one. - --octopus:: Compute the best common ancestors of all supplied commits, in preparation for an n-way merge. This mimics the behavior @@ -51,6 +50,12 @@ OPTIONS from any other. This mimics the behavior of 'git show-branch --independent'. +OPTIONS +------- +-a:: +--all:: + Output all merge bases for the commits, instead of just one. + DISCUSSION ---------- @@ -89,6 +94,9 @@ and the result of `git merge-base A M` is '1'. Commit '2' is also a common ancestor between 'A' and 'M', but '1' is a better common ancestor, because '2' is an ancestor of '1'. Hence, '2' is not a merge base. +The result of `git merge-base --octopus A B C` is '2', because '2' is +the best common ancestor of all commits. + When the history involves criss-cross merges, there can be more than one 'best' common ancestor for two commits. For example, with this topology: diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 296f314eae..913ecd8c43 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -57,8 +57,11 @@ list:: add:: Add notes for a given object (defaults to HEAD). Abort if the - object already has notes (use `-f` to overwrite an - existing note). + object already has notes (use `-f` to overwrite existing notes). + However, if you're using `add` interactively (using an editor + to supply the notes contents), then - instead of aborting - + the existing notes will be opened in the editor (like the `edit` + subcommand). copy:: Copy the notes for the first object onto the second object. diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 620d50e71f..9a075bc4d2 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git rebase' [-i | --interactive] [options] [--onto <newbase>] - <upstream> [<branch>] + [<upstream>] [<branch>] 'git rebase' [-i | --interactive] [options] --onto <newbase> --root [<branch>] @@ -21,6 +21,12 @@ If <branch> is specified, 'git rebase' will perform an automatic `git checkout <branch>` before doing anything else. Otherwise it remains on the current branch. +If <upstream> is not specified, the upstream configured in +branch.<name>.remote and branch.<name>.merge options will be used; see +linkgit:git-config[1] for details. If you are currently not on any +branch or if the current branch does not have a configured upstream, +the rebase will abort. + All changes made by commits in the current branch but that are not in <upstream> are saved to a temporary area. This is the same set of commits that would be shown by `git log <upstream>..HEAD` (or @@ -217,7 +223,8 @@ leave out at most one of A and B, in which case it defaults to HEAD. <upstream>:: Upstream branch to compare against. May be any valid commit, - not just an existing branch name. + not just an existing branch name. Defaults to the configured + upstream for the current branch. <branch>:: Working branch; defaults to HEAD. diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 8481f9db74..b2832fc7eb 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git reset' [-q] [<commit>] [--] <paths>... -'git reset' --patch [<commit>] [--] [<paths>...] +'git reset' [--patch|-p] [<commit>] [--] [<paths>...] 'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>] DESCRIPTION @@ -39,8 +39,9 @@ working tree in one go. and <commit> (defaults to HEAD). The chosen hunks are applied in reverse to the index. + -This means that `git reset -p` is the opposite of `git add -p` (see -linkgit:git-add[1]). +This means that `git reset -p` is the opposite of `git add -p`, i.e. +you can use it to selectively reset hunks. See the ``Interactive Mode'' +section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. 'git reset' [--<mode>] [<commit>]:: This form resets the current branch head to <commit> and diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index ee14f74fd3..5a168cfab2 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -348,10 +348,12 @@ sendemail.confirm:: one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' in the previous section for the meaning of these values. +EXAMPLE +------- Use gmail as the smtp server ----------------------------- - -Add the following section to the config file: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +To use 'git send-email' to send your patches through the GMail SMTP server, +edit ~/.gitconfig to specify your account settings: [sendemail] smtpencryption = tls @@ -359,9 +361,20 @@ Add the following section to the config file: smtpuser = yourname@gmail.com smtpserverport = 587 +Once your commits are ready to be sent to the mailing list, run the +following commands: + + $ git format-patch --cover-letter -M origin/master -o outgoing/ + $ edit outgoing/0000-* + $ git send-email outgoing/* + Note: the following perl modules are required Net::SMTP::SSL, MIME::Base64 and Authen::SASL +SEE ALSO +-------- +linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5) + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-i18n--envsubst.txt b/Documentation/git-sh-i18n--envsubst.txt new file mode 100644 index 0000000000..f5bbf7750d --- /dev/null +++ b/Documentation/git-sh-i18n--envsubst.txt @@ -0,0 +1,26 @@ +git-sh-i18n--envsubst(1) +======================== + +NAME +---- +git-sh-i18n--envsubst - Git's own envsubst(1) for i18n fallbacks + +DESCRIPTION +----------- + +This is not a command the end user would want to run. Ever. +This documentation is meant for people who are studying the +plumbing scripts and/or are writing new ones. + +git-sh-i18n--envsubst is Git's stripped-down copy of the GNU +`envsubst(1)` program that comes with the GNU gettext package. It's +used internally by linkgit:git-sh-i18n[1] to interpolate the variables +passed to the the `eval_gettext` function. + +No promises are made about the interface, or that this +program won't disappear without warning in the next version +of Git. Don't use it. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-i18n.txt b/Documentation/git-sh-i18n.txt new file mode 100644 index 0000000000..3b1f7ac7b5 --- /dev/null +++ b/Documentation/git-sh-i18n.txt @@ -0,0 +1,42 @@ +git-sh-i18n(1) +============== + +NAME +---- +git-sh-i18n - Git's i18n setup code for shell scripts + +SYNOPSIS +-------- +'. "$(git --exec-path)/git-sh-i18n"' + +DESCRIPTION +----------- + +This is not a command the end user would want to run. Ever. +This documentation is meant for people who are studying the +Porcelain-ish scripts and/or are writing new ones. + +The 'git sh-i18n scriptlet is designed to be sourced (using +`.`) by Git's porcelain programs implemented in shell +script. It provides wrappers for the GNU `gettext` and +`eval_gettext` functions accessible through the `gettext.sh` +script, and provides pass-through fallbacks on systems +without GNU gettext. + +FUNCTIONS +--------- + +gettext:: + Currently a dummy fall-through function implemented as a wrapper + around `printf(1)`. Will be replaced by a real gettext + implementation in a later version. + +eval_gettext:: + Currently a dummy fall-through function implemented as a wrapper + around `printf(1)` with variables expanded by the + linkgit:git-sh-i18n--envsubst[1] helper. Will be replaced by a + real gettext implementation in a later version. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 053df505bc..27fd8ba854 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -58,9 +58,14 @@ cd_to_toplevel:: runs chdir to the toplevel of the working tree. require_work_tree:: - checks if the repository is a bare repository, and dies - if so. Used by scripts that require working tree - (e.g. `checkout`). + checks if the current directory is within the working tree + of the repository, and otherwise dies. + +require_work_tree_exists:: + checks if the working tree associated with the repository + exists, and otherwise dies. Often done before calling + cd_to_toplevel, which is impossible to do if there is no + working tree. get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 79abc38e50..15f051fa44 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -13,7 +13,7 @@ SYNOPSIS 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] -'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]] +'git stash' [save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]] 'git stash' clear 'git stash' create @@ -42,7 +42,7 @@ is also possible). OPTIONS ------- -save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: +save [-p|--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: Save your local modifications to a new 'stash', and run `git reset --hard` to revert them. The <message> part is optional and gives @@ -54,12 +54,13 @@ save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: If the `--keep-index` option is used, all changes already added to the index are left intact. + -With `--patch`, you can interactively select hunks from in the diff +With `--patch`, you can interactively select hunks from the diff between HEAD and the working tree to be stashed. The stash entry is constructed such that its index state is the same as the index state of your repository, and its worktree contains only the changes you selected interactively. The selected changes are then rolled back -from your worktree. +from your worktree. See the ``Interactive Mode'' section of +linkgit:git-add[1] to learn how to operate the `\--patch` mode. + The `--patch` option implies `--keep-index`. You can use `--no-keep-index` to override this. diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1a16ff6044..5e7a4130ee 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -186,8 +186,10 @@ OPTIONS -f:: --force:: - This option is only valid for the add command. - Allow adding an otherwise ignored submodule path. + This option is only valid for add and update commands. + When running add, allow adding an otherwise ignored submodule path. + When running update, throw away local changes in submodules when + switching to a different commit. --cached:: This option is only valid for status and summary commands. These diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 30a67486d2..713e523034 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -145,17 +145,6 @@ Skip "branches" and "tags" of first level directories;; ------------------------------------------------------------------------ -- ---use-log-author;; - When retrieving svn commits into git (as part of fetch, rebase, or - dcommit operations), look for the first From: or Signed-off-by: line - in the log message and use that as the author string. ---add-author-from;; - When committing to svn from git (as part of commit or dcommit - operations), if the existing log message doesn't already have a - From: or Signed-off-by: line, append a From: line based on the - git commit's author string. If you use this, then --use-log-author - will retrieve a valid author string for all commits. - 'clone':: Runs 'init' and 'fetch'. It will automatically create a directory based on the basename of the URL passed to it; @@ -350,6 +339,8 @@ Any other arguments are passed directly to 'git log' Empty directories are automatically recreated when using "git svn clone" and "git svn rebase", so "mkdirs" is intended for use after commands like "git checkout" or "git reset". + (See the svn-remote.<name>.automkdirs config file option for + more information.) 'commit-diff':: Commits the diff of two tree-ish arguments from the @@ -572,6 +563,17 @@ repository that will be fetched from. For 'branch' and 'tag', display the urls that will be used for copying when creating the branch or tag. +--use-log-author:: + When retrieving svn commits into git (as part of 'fetch', 'rebase', or + 'dcommit' operations), look for the first `From:` or `Signed-off-by:` line + in the log message and use that as the author string. +--add-author-from:: + When committing to svn from git (as part of 'commit-diff', 'set-tree' or 'dcommit' + operations), if the existing log message doesn't already have a + `From:` or `Signed-off-by:` line, append a `From:` line based on the + git commit's author string. If you use this, then `--use-log-author` + will retrieve a valid author string for all commits. + ADVANCED OPTIONS ---------------- @@ -680,6 +682,14 @@ svn.pathnameencoding:: locales to avoid corrupted file names with non-ASCII characters. Valid encodings are the ones supported by Perl's Encode module. +svn-remote.<name>.automkdirs:: + Normally, the "git svn clone" and "git svn rebase" commands + attempt to recreate empty directories that are in the + Subversion repository. If this option is set to "false", then + empty directories will only be created if the "git svn mkdirs" + command is run explicitly. If unset, 'git svn' assumes this + option to be "true". + Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps options all affect the metadata generated and used by 'git svn'; they *must* be set in the configuration file before any history is imported @@ -774,10 +784,9 @@ use `git svn rebase` to update your work branch instead of `git pull` or when committing into SVN, which can lead to merge commits reversing previous commits in SVN. -DESIGN PHILOSOPHY ------------------ -Merge tracking in Subversion is lacking and doing branched development -with Subversion can be cumbersome as a result. While 'git svn' can track +MERGE TRACKING +-------------- +While 'git svn' can track copy history (including branches and tags) for repositories adopting a standard layout, it cannot yet represent merge history that happened inside git back upstream to SVN users. Therefore it is advised that @@ -787,16 +796,15 @@ compatibility with SVN (see the CAVEATS section below). CAVEATS ------- -For the sake of simplicity and interoperating with a less-capable system -(SVN), it is recommended that all 'git svn' users clone, fetch and dcommit +For the sake of simplicity and interoperating with Subversion, +it is recommended that all 'git svn' users clone, fetch and dcommit directly from the SVN server, and avoid all 'git clone'/'pull'/'merge'/'push' operations between git repositories and branches. The recommended method of exchanging code between git branches and users is 'git format-patch' and 'git am', or just 'dcommit'ing to the SVN repository. Running 'git merge' or 'git pull' is NOT recommended on a branch you -plan to 'dcommit' from. Subversion does not represent merges in any -reasonable or useful fashion; so users using Subversion cannot see any +plan to 'dcommit' from because Subversion users cannot see any merges you've made. Furthermore, if you merge or pull from a git branch that is a mirror of an SVN branch, 'dcommit' may commit to the wrong branch. @@ -846,7 +854,7 @@ Renamed and copied directories are not detected by git and hence not tracked when committing to SVN. I do not plan on adding support for this as it's quite difficult and time-consuming to get working for all the possible corner cases (git doesn't do it, either). Committing -renamed and copied files are fully supported if they're similar enough +renamed and copied files is fully supported if they're similar enough for git to detect them. CONFIGURATION diff --git a/Documentation/git.txt b/Documentation/git.txt index 9d5949229a..65317cce18 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -9,7 +9,7 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--exec-path[=<path>]] [--html-path] +'git' [--version] [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=<path>] [--work-tree=<path>] [-c <name>=<value>] @@ -44,9 +44,12 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.5/git.html[documentation for release 1.7.5] +* link:v1.7.5.3/git.html[documentation for release 1.7.5.3] * release notes for + link:RelNotes/1.7.5.3.txt[1.7.5.3], + link:RelNotes/1.7.5.2.txt[1.7.5.2], + link:RelNotes/1.7.5.1.txt[1.7.5.1], link:RelNotes/1.7.5.txt[1.7.5]. * link:v1.7.4.5/git.html[documentation for release 1.7.4.5] @@ -287,8 +290,16 @@ help ...`. the current setting and then exit. --html-path:: - Print the path to wherever your git HTML documentation is installed - and exit. + Print the path, without trailing slash, where git's HTML + documentation is installed and exit. + +--man-path:: + Print the manpath (see `man(1)`) for the man pages for + this version of git and exit. + +--info-path:: + Print the path where the Info files documenting this + version of git are installed and exit. -p:: --paginate:: diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 15aebc6062..412c55b549 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -593,6 +593,37 @@ and now produces better output), you can remove the cache manually with `git update-ref -d refs/notes/textconv/jpg` (where "jpg" is the name of the diff driver, as in the example above). +Choosing textconv versus external diff +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If you want to show differences between binary or specially-formatted +blobs in your repository, you can choose to use either an external diff +command, or to use textconv to convert them to a diff-able text format. +Which method you choose depends on your exact situation. + +The advantage of using an external diff command is flexibility. You are +not bound to find line-oriented changes, nor is it necessary for the +output to resemble unified diff. You are free to locate and report +changes in the most appropriate way for your data format. + +A textconv, by comparison, is much more limiting. You provide a +transformation of the data into a line-oriented text format, and git +uses its regular diff tools to generate the output. There are several +advantages to choosing this method: + +1. Ease of use. It is often much simpler to write a binary to text + transformation than it is to perform your own diff. In many cases, + existing programs can be used as textconv filters (e.g., exif, + odt2txt). + +2. Git diff features. By performing only the transformation step + yourself, you can still utilize many of git's diff features, + including colorization, word-diff, and combined diffs for merges. + +3. Caching. Textconv caching can speed up repeated diffs, such as those + you might trigger by running `git log -p`. + + Marking files as binary ^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 33716a31d0..8f62d1abee 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -277,7 +277,8 @@ This commit is referred to as a "merge commit", or sometimes just a Pattern used to specify paths. + Pathspecs are used on the command line of "git ls-files", "git -ls-tree", "git grep", "git checkout", and many other commands to +ls-tree", "git add", "git grep", "git diff", "git checkout", +and many other commands to limit the scope of operations to some subset of the tree or worktree. See the documentation of each command for whether paths are relative to the current directory or toplevel. The @@ -296,6 +297,37 @@ For example, Documentation/*.jpg will match all .jpg files in the Documentation subtree, including Documentation/chapter_1/figure_1.jpg. ++ +A pathspec that begins with a colon `:` has special meaning. In the +short form, the leading colon `:` is followed by zero or more "magic +signature" letters (which optionally is terminated by another colon `:`), +and the remainder is the pattern to match against the path. The optional +colon that terminates the "magic signature" can be omitted if the pattern +begins with a character that cannot be a "magic signature" and is not a +colon. ++ +In the long form, the leading colon `:` is followed by a open +parenthesis `(`, a comma-separated list of zero or more "magic words", +and a close parentheses `)`, and the remainder is the pattern to match +against the path. ++ +The "magic signature" consists of an ASCII symbol that is not +alphanumeric. ++ +-- +top `/`;; + The magic word `top` (mnemonic: `/`) makes the pattern match + from the root of the working tree, even when you are running + the command from inside a subdirectory. +-- ++ +Currently only the slash `/` is recognized as the "magic signature", +but it is envisioned that we will support more types of magic in later +versions of git. ++ +A pathspec with only a colon means "there is no pathspec". This form +should not be combined with other pathspec. + [[def_parent]]parent:: A <<def_commit_object,commit object>> contains a (possibly empty) list of the logical predecessor(s) in the line of development, i.e. its diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index 8920258baa..861bd6f553 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -16,6 +16,16 @@ merge.defaultToUpstream:: to their corresponding remote tracking branches, and the tips of these tracking branches are merged. +merge.ff:: + By default, git does not create an extra merge commit when merging + a commit that is a descendant of the current commit. Instead, the + tip of the current branch is fast-forwarded. When set to `false`, + this variable tells git to create an extra merge commit in such + a case (equivalent to giving the `--no-ff` option from the command + line). When set to `only`, only such fast-forward merges are + allowed (equivalent to giving the `--ff-only` option from the + command line). + merge.log:: In addition to branch names, populate the log message with at most the specified number of one-line descriptions from the diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 50923e2ce9..2a3dc8664f 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -19,6 +19,11 @@ configuration (see linkgit:git-config[1]). This should make "--pretty=oneline" a whole lot more readable for people using 80-column terminals. +--no-abbrev-commit:: + Show the full 40-byte hexadecimal commit object name. This negates + `--abbrev-commit` and those options which imply it such as + "--oneline". It also overrides the 'log.abbrevCommit' variable. + --oneline:: This is a shorthand for "--pretty=oneline --abbrev-commit" used together. @@ -30,19 +35,34 @@ people using 80-column terminals. preferred by the user. For non plumbing commands this defaults to UTF-8. ---no-notes:: ---show-notes[=<ref>]:: +--notes[=<ref>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when - there is no `--pretty`, `--format` nor `--oneline` option is - given on the command line. + there is no `--pretty`, `--format` nor `--oneline` option given + on the command line. ++ +By default, the notes shown are from the notes refs listed in the +'core.notesRef' and 'notes.displayRef' variables (or corresponding +environment overrides). See linkgit:git-config[1] for more details. + -With an optional argument, add this ref to the list of notes. The ref -is taken to be in `refs/notes/` if it is not qualified. +With an optional '<ref>' argument, show this notes ref instead of the +default notes ref(s). The ref is taken to be in `refs/notes/` if it +is not qualified. ++ +Multiple --notes options can be combined to control which notes are +being displayed. Examples: "--notes=foo" will show only notes from +"refs/notes/foo"; "--notes=foo --notes" will show both notes from +"refs/notes/foo" and from the default notes ref(s). + +--no-notes:: + Do not show notes. This negates the above `--notes` option, by + resetting the list of notes refs from which notes are shown. + Options are parsed in the order given on the command line, so e.g. + "--notes --notes=foo --no-notes --notes=bar" will only show notes + from "refs/notes/bar". +--show-notes[=<ref>]:: --[no-]standard-notes:: - Enable or disable populating the notes ref list from the - 'core.notesRef' and 'notes.displayRef' variables (or - corresponding environment overrides). Enabled by default. - See linkgit:git-config[1]. + These options are deprecated. Use the above --notes/--no-notes + options instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 73111bb051..52bae31fcb 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -730,7 +730,10 @@ ifdef::git-rev-list[] Print a number stating how many commits would have been listed, and suppress all other output. When used together with '--left-right', instead print the counts for left and - right commits, separated by a tab. + right commits, separated by a tab. When used together with + '--cherry-mark', omit patch equivalent commits from these + counts and print the count for equivalent commits separated + by a tab. endif::git-rev-list[] |