diff options
Diffstat (limited to 'Documentation')
66 files changed, 2082 insertions, 179 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index c6e536f180..0ddd36879a 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -171,6 +171,11 @@ For C programs: - We try to keep to at most 80 characters per line. + - As a Git developer we assume you have a reasonably modern compiler + and we recommend you to enable the DEVELOPER makefile knob to + ensure your patch is clear of all compiler warnings we care about, + by e.g. "echo DEVELOPER=1 >>config.mak". + - We try to support a wide range of C compilers to compile Git with, including old ones. That means that you should not use C99 initializers, even if a lot of compilers grok it. diff --git a/Documentation/RelNotes/2.7.0.txt b/Documentation/RelNotes/2.7.0.txt new file mode 100644 index 0000000000..563dadc57e --- /dev/null +++ b/Documentation/RelNotes/2.7.0.txt @@ -0,0 +1,414 @@ +Git 2.7 Release Notes +===================== + +Updates since v2.6 +------------------ + +UI, Workflows & Features + + * The appearance of "gitk", particularly on high DPI monitors, have + been improved. "gitk" also comes with an undated translation for + Swedish and Japanese. + + * "git remote" learned "get-url" subcommand to show the URL for a + given remote name used for fetching and pushing. + + * There was no way to defeat a configured rebase.autostash variable + from the command line, as "git rebase --no-autostash" was missing. + + * "git log --date=local" used to only show the normal (default) + format in the local timezone. The command learned to take 'local' + as an instruction to use the local timezone with other formats, + + * The refs used during a "git bisect" session is now per-worktree so + that independent bisect sessions can be done in different worktrees + created with "git worktree add". + + * Users who are too busy to type three extra keystrokes to ask for + "git stash show -p" can now set stash.showPatch configuration + variable to true to always see the actual patch, not just the list + of paths affected with feel for the extent of damage via diffstat. + + * "quiltimport" allows to specify the series file by honoring the + $QUILT_SERIES environment and also --series command line option. + + * The use of 'good/bad' in "git bisect" made it confusing to use when + hunting for a state change that is not a regression (e.g. bugfix). + The command learned 'old/new' and then allows the end user to + say e.g. "bisect start --term-old=fast --term-new=slow" to find a + performance regression. + + * "git interpret-trailers" can now run outside of a Git repository. + + * "git p4" learned to reencode the pathname it uses to communicate + with the p4 depot with a new option. + + * Give progress meter to "git filter-branch". + + * Allow a later "!/abc/def" to override an earlier "/abc" that + appears in the same .gitignore file to make it easier to express + "everything in /abc directory is ignored, except for ...". + + * Teach "git p4" to send large blobs outside the repository by + talking to Git LFS. + + * Prepare for Git on-disk repository representation to undergo + backward incompatible changes by introducing a new repository + format version "1", with an extension mechanism. + + * "git worktree" learned a "list" subcommand. + + * "git clone --dissociate" learned that it can be used even when + "--reference" was not used at the same time. + + * "git blame" learnt to take "--first-parent" and "--reverse" at the + same time when it makes sense. + + * "git checkout" did not follow the usual "--[no-]progress" + convention and implemented only "--quiet" that is essentially + a superset of "--no-progress". Extend the command to support the + usual "--[no-]progress". + + * The semantics of transfer.hideRefs configuration variable have been + extended to work better with the ref "namespace" feature that lets + you throw unrelated bunches of repositories in a single physical + repository and virtually serve them as separate ones. + + * send-email config variables whose values are pathnames now go + through the ~username/ expansion. + + * bash completion learnt to TAB-complete recipient addresses given + to send-email. + + * The credential-cache daemon can be told to ignore SIGHUP to work + around issue when running Git from inside emacs. + + * "git push" learned new configuration for doing "--recurse-submodules" + on each push. + + * "format-patch" has learned a new option to zero-out the commit + object name on the mbox "From " line. + + +Performance, Internal Implementation, Development Support etc. + + * The infrastructure to rewrite "git submodule" in C is being built + incrementally. Let's polish these early parts well enough and make + them graduate to 'next' and 'master', so that the more involved + follow-up can start cooking on a solid ground. + + * Some features from "git tag -l" and "git branch -l" have been made + available to "git for-each-ref" so that eventually the unified + implementation can be shared across all three. The version merged + to the 'master' branch earlier had a performance regression in "tag + --contains", which has since been corrected. + + * Because "test_when_finished" in our test framework queues the + clean-up tasks to be done in a shell variable, it should not be + used inside a subshell. Add a mechanism to allow 'bash' to catch + such uses, and fix the ones that were found. + + * The debugging infrastructure for pkt-line based communication has + been improved to mark the side-band communication specifically. + + * Update "git branch" that list existing branches, using the + ref-filter API that is shared with "git tag" and "git + for-each-ref". + + * The test for various line-ending conversions has been enhanced. + + * A few test scripts around "git p4" have been improved for + portability. + + * Many allocations that is manually counted (correctly) that are + followed by strcpy/sprintf have been replaced with a less error + prone constructs such as xstrfmt. + + * The internal stripspace() function has been moved to where it + logically belongs to, i.e. strbuf API, and the command line parser + of "git stripspace" has been updated to use the parse_options API. + + * "git am" used to spawn "git mailinfo" via run_command() API once + per each patch, but learned to make a direct call to mailinfo() + instead. + + * The implementation of "git mailinfo" was refactored so that a + mailinfo() function can be directly called from inside a process. + + * With a "debug" helper, debugging of a single "git" invocation in + our test scripts has become a lot easier. + + * The "configure" script did not test for -lpthread correctly, which + upset some linkers. + + * Cross completed task off of subtree project's todo list. + + * Test cleanups for the subtree project. + + * Clean up style in an ancient test t9300. + + * Work around some test flakiness with p4d. + + * Fsck did not correctly detect a NUL-truncated header in a tag. + + * Use a safer behavior when we hit errors verifying remote certificates. + + * Speed up filter-branch for cases where we only care about rewriting + commits, not tree data. + + * The parse-options API has been updated to make "-h" command line + option work more consistently in all commands. + + * "git svn rebase/mkdirs" got optimized by keeping track of empty + directories better. + + * Fix some racy client/server tests by treating SIGPIPE the same as a + normal non-zero exit. + + * The necessary infrastructure to build topics using the free Travis + CI has been added. Developers forking from this topic (and enabling + Travis) can do their own builds, and we can turn on auto-builds for + git/git (including build-status for pull requests that people + open). + + * The write(2) emulation for Windows learned to set errno to EPIPE + when necessary. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.6 +---------------- + +Unless otherwise noted, all the fixes since v2.6 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * Very small number of options take a parameter that is optional + (which is not a great UI element as they can only appear at the end + of the command line). Add notice to documentation of each and + every one of them. + + * "git blame --first-parent v1.0..v2.0" was not rejected but did not + limit the blame to commits on the first parent chain. + + * "git subtree" (in contrib/) now can take whitespaces in the + pathnames, not only in the in-tree pathname but the name of the + directory that the repository is in. + + * The ssh transport, just like any other transport over the network, + did not clear GIT_* environment variables, but it is possible to + use SendEnv and AcceptEnv to leak them to the remote invocation of + Git, which is not a good idea at all. Explicitly clear them just + like we do for the local transport. + + * Correct "git p4 --detect-labels" so that it does not fail to create + a tag that points at a commit that is also being imported. + + * The Makefile always runs the library archiver with hardcoded "crs" + options, which was inconvenient for exotic platforms on which + people want to use programs with totally different set of command + line options. + + * Customization to change the behaviour with "make -w" and "make -s" + in our Makefile was broken when they were used together. + + * Allocation related functions and stdio are unsafe things to call + inside a signal handler, and indeed killing the pager can cause + glibc to deadlock waiting on allocation mutex as our signal handler + tries to free() some data structures in wait_for_pager(). Reduce + these unsafe calls. + + * The way how --ref/--notes to specify the notes tree reference are + DWIMmed was not clearly documented. + + * "git gc" used to barf when a symbolic ref has gone dangling + (e.g. the branch that used to be your upstream's default when you + cloned from it is now gone, and you did "fetch --prune"). + + * "git clone --dissociate" runs a big "git repack" process at the + end, and it helps to close file descriptors that are open on the + packs and their idx files before doing so on filesystems that + cannot remove a file that is still open. + + * Description of the "log.follow" configuration variable in "git log" + documentation is now also copied to "git config" documentation. + + * "git rebase -i" had a minor regression recently, which stopped + considering a line that begins with an indented '#' in its insn + sheet not a comment. Further, the code was still too picky on + Windows where CRLF left by the editor is turned into a trailing CR + on the line read via the "read" built-in command of bash. Both of + these issues are now fixed. + + * After "git checkout --detach", "git status" reported a fairly + useless "HEAD detached at HEAD", instead of saying at which exact + commit. + + * When "git send-email" wanted to talk over Net::SMTP::SSL, + Net::Cmd::datasend() did not like to be fed too many bytes at the + same time and failed to send messages. Send the payload one line + at a time to work around the problem. + + * When "git am" was rewritten as a built-in, it stopped paying + attention to user.signingkey, which was fixed. + + * It was not possible to use a repository-lookalike created by "git + worktree add" as a local source of "git clone". + + * On a case insensitive filesystems, setting GIT_WORK_TREE variable + using a random cases that does not agree with what the filesystem + thinks confused Git that it wasn't inside the working tree. + + * Performance-measurement tests did not work without an installed Git. + + * A test script for the HTTP service had a timing dependent bug, + which was fixed. + + * There were some classes of errors that "git fsck" diagnosed to its + standard error that did not cause it to exit with non-zero status. + + * Work around "git p4" failing when the P4 depot records the contents + in UTF-16 without UTF-16 BOM. + + * When "git gc --auto" is backgrounded, its diagnosis message is + lost. Save it to a file in $GIT_DIR and show it next time the "gc + --auto" is run. + + * The submodule code has been taught to work better with separate + work trees created via "git worktree add". + + * "git gc" is safe to run anytime only because it has the built-in + grace period to protect young objects. In order to run with no + grace period, the user must make sure that the repository is + quiescent. + + * A recent "filter-branch --msg-filter" broke skipping of the commit + object header, which is fixed. + + * The normalize_ceiling_entry() function does not muck with the end + of the path it accepts, and the real world callers do rely on that, + but a test insisted that the function drops a trailing slash. + + * A test for interaction between untracked cache and sparse checkout + added in Git 2.5 days were flaky. + + * A couple of commands still showed "[options]" in their usage string + to note where options should come on their command line, but we + spell that "[<options>]" in most places these days. + + * The synopsis text and the usage string of subcommands that read + list of things from the standard input are often shown as if they + only take input from a file on a filesystem, which was misleading. + + * "git am -3" had a small regression where it is aborted in its error + handling codepath when underlying merge-recursive failed in certain + ways, as it assumed that the internal call to merge-recursive will + never die, which is not the case (yet). + + * The linkage order of libraries was wrong in places around libcurl. + + * The name-hash subsystem that is used to cope with case insensitive + filesystems keeps track of directories and their on-filesystem + cases for all the paths in the index by holding a pointer to a + randomly chosen cache entry that is inside the directory (for its + ce->ce_name component). This pointer was not updated even when the + cache entry was removed from the index, leading to use after free. + This was fixed by recording the path for each directory instead of + borrowing cache entries and restructuring the API somewhat. + + * "git merge-file" tried to signal how many conflicts it found, which + obviously would not work well when there are too many of them. + + * The error message from "git blame --contents --reverse" incorrectly + talked about "--contents --children". + + * "git imap-send" did not compile well with older version of cURL library. + + * Merging a branch that removes a path and another that changes the + mode bits on the same path should have conflicted at the path, but + it didn't and silently favoured the removal. + + * "git --literal-pathspecs add -u/-A" without any command line + argument misbehaved ever since Git 2.0. + + * "git daemon" uses "run_command()" without "finish_command()", so it + needs to release resources itself, which it forgot to do. + + * "git status --branch --short" accessed beyond the constant string + "HEAD", which has been corrected. + + * We peek objects from submodule's object store by linking it to the + list of alternate object databases, but the code to do so forgot to + correctly initialize the list. + + * The code to prepare the working tree side of temporary directory + for the "dir-diff" feature forgot that symbolic links need not be + copied (or symlinked) to the temporary area, as the code already + special cases and overwrites them. Besides, it was wrong to try + computing the object name of the target of symbolic link, which may + not even exist or may be a directory. + + * A Range: request can be responded with a full response and when + asked properly libcurl knows how to strip the result down to the + requested range. However, we were hand-crafting a range request + and it did not kick in. + + * Having a leftover .idx file without corresponding .pack file in + the repository hurts performance; "git gc" learned to prune them. + + * Apple's common crypto implementation of SHA1_Update() does not take + more than 4GB at a time, and we now have a compile-time workaround + for it. + + * Produce correct "dirty" marker for shell prompts, even when we + are on an orphan or an unborn branch. + + * A build without NO_IPv6 used to use gethostbyname() when guessing + user's hostname, instead of getaddrinfo() that is used in other + codepaths in such a build. + + * The exit code of git-fsck did not reflect some types of errors + found in packed objects, which has been corrected. + + * The helper used to iterate over loose object directories to prune + stale objects did not closedir() immediately when it is done with a + directory--a callback such as the one used for "git prune" may want + to do rmdir(), but it would fail on open directory on platforms + such as WinXP. + + * "git p4" used to import Perforce CLs that touch only paths outside + the client spec as empty commits. It has been corrected to ignore + them instead, with a new configuration git-p4.keepEmptyCommits as a + backward compatibility knob. + + * The completion script (in contrib/) used to list "git column" + (which is not an end-user facing command) as one of the choices + (merge 160fcdb sg/completion-no-column later to maint). + + * The error reporting from "git send-email", when SMTP TLS fails, has + been improved. + (merge 9d60524 jk/send-email-ssl-errors later to maint). + + * When getpwuid() on the system returned NULL (e.g. the user is not + in the /etc/passwd file or other uid-to-name mappings), the + codepath to find who the user is to record it in the reflog barfed + and died. Loosen the check in this codepath, which already accepts + questionable ident string (e.g. host part of the e-mail address is + obviously bogus), and in general when we operate fmt_ident() function + in non-strict mode. + (merge 92bcbb9 jk/ident-loosen-getpwuid later to maint). + + * "git symbolic-ref" forgot to report a failure with its exit status. + (merge f91b273 jk/symbolic-ref-maint later to maint). + + * History traversal with "git log --source" that starts with an + annotated tag failed to report the tag as "source", due to an + old regression in the command line parser back in v2.2 days. + (merge 728350b jk/pending-keep-tag-name later to maint). + + * "git p4" when interacting with multiple depots at the same time + used to incorrectly drop changes. + + * Code clean-up, minor fixes etc. diff --git a/Documentation/RelNotes/2.7.1.txt b/Documentation/RelNotes/2.7.1.txt new file mode 100644 index 0000000000..6553d69e33 --- /dev/null +++ b/Documentation/RelNotes/2.7.1.txt @@ -0,0 +1,87 @@ +Git v2.7.1 Release Notes +======================== + +Fixes since v2.7 +---------------- + + * An earlier change in 2.5.x-era broke users' hooks and aliases by + exporting GIT_WORK_TREE to point at the root of the working tree, + interfering when they tried to use a different working tree without + setting GIT_WORK_TREE environment themselves. + + * The "exclude_list" structure has the usual "alloc, nr" pair of + fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot + to reset 'alloc' to 0 when it cleared 'nr' to discard the managed + array. + + * "git send-email" was confused by escaped quotes stored in the alias + files saved by "mutt", which has been corrected. + + * A few unportable C construct have been spotted by clang compiler + and have been fixed. + + * The documentation has been updated to hint the connection between + the '--signoff' option and DCO. + + * "git reflog" incorrectly assumed that all objects that used to be + at the tip of a ref must be commits, which caused it to segfault. + + * The ignore mechanism saw a few regressions around untracked file + listing and sparse checkout selection areas in 2.7.0; the change + that is responsible for the regression has been reverted. + + * Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR + (e.g. COMMIT_EDITMSG) that is meant to be left after the command is + done. This however did not work well if the repository is set to + be shared with core.sharedRepository and the umask of the previous + user is tighter. They have been made to work better by calling + unlink(2) and retrying after fopen(3) fails with EPERM. + + * Asking gitweb for a nonexistent commit left a warning in the server + log. + + * "git rebase", unlike all other callers of "gc --auto", did not + ignore the exit code from "gc --auto". + + * Many codepaths that run "gc --auto" before exiting kept packfiles + mapped and left the file descriptors to them open, which was not + friendly to systems that cannot remove files that are open. They + now close the packs before doing so. + + * A recent optimization to filter-branch in v2.7.0 introduced a + regression when --prune-empty filter is used, which has been + corrected. + + * The description for SANITY prerequisite the test suite uses has + been clarified both in the comment and in the implementation. + + * "git tag" started listing a tag "foo" as "tags/foo" when a branch + named "foo" exists in the same repository; remove this unnecessary + disambiguation, which is a regression introduced in v2.7.0. + + * The way "git svn" uses auth parameter was broken by Subversion + 1.9.0 and later. + + * The "split" subcommand of "git subtree" (in contrib/) incorrectly + skipped merges when it shouldn't, which was corrected. + + * A few options of "git diff" did not work well when the command was + run from a subdirectory. + + * dirname() emulation has been added, as Msys2 lacks it. + + * The underlying machinery used by "ls-files -o" and other commands + have been taught not to create empty submodule ref cache for a + directory that is not a submodule. This removes a ton of wasted + CPU cycles. + + * Drop a few old "todo" items by deciding that the change one of them + suggests is not such a good idea, and doing the change the other + one suggested to do. + + * Documentation for "git fetch --depth" has been updated for clarity. + + * The command line completion learned a handful of additional options + and command specific syntax. + +Also includes a handful of documentation and test updates. diff --git a/Documentation/RelNotes/2.7.2.txt b/Documentation/RelNotes/2.7.2.txt new file mode 100644 index 0000000000..4feef76704 --- /dev/null +++ b/Documentation/RelNotes/2.7.2.txt @@ -0,0 +1,41 @@ +Git v2.7.2 Release Notes +======================== + +Fixes since v2.7.1 +------------------ + + * The low-level merge machinery has been taught to use CRLF line + termination when inserting conflict markers to merged contents that + are themselves CRLF line-terminated. + + * "git worktree" had a broken code that attempted to auto-fix + possible inconsistency that results from end-users moving a + worktree to different places without telling Git (the original + repository needs to maintain backpointers to its worktrees, but + "mv" run by end-users who are not familiar with that fact will + obviously not adjust them), which actually made things worse + when triggered. + + * "git push --force-with-lease" has been taught to report if the push + needed to force (or fast-forwarded). + + * The emulated "yes" command used in our test scripts has been + tweaked not to spend too much time generating unnecessary output + that is not used, to help those who test on Windows where it would + not stop until it fills the pipe buffer due to lack of SIGPIPE. + + * The vimdiff backend for "git mergetool" has been tweaked to arrange + and number buffers in the order that would match the expectation of + majority of people who read left to right, then top down and assign + buffers 1 2 3 4 "mentally" to local base remote merge windows based + on that order. + + * The documentation for "git clean" has been corrected; it mentioned + that .git/modules/* are removed by giving two "-f", which has never + been the case. + + * Paths that have been told the index about with "add -N" are not + quite yet in the index, but a few commands behaved as if they + already are in a harmful way. + +Also includes tiny documentation and test updates. diff --git a/Documentation/RelNotes/2.7.3.txt b/Documentation/RelNotes/2.7.3.txt new file mode 100644 index 0000000000..6adf038915 --- /dev/null +++ b/Documentation/RelNotes/2.7.3.txt @@ -0,0 +1,62 @@ +Git v2.7.3 Release Notes +======================== + +Fixes since v2.7.2 +------------------ + + * Traditionally, the tests that try commands that work on the + contents in the working tree were named with "worktree" in their + filenames, but with the recent addition of "git worktree" + subcommand, whose tests are also named similarly, it has become + harder to tell them apart. The traditional tests have been renamed + to use "work-tree" instead in an attempt to differentiate them. + + * Many codepaths forget to check return value from git_config_set(); + the function is made to die() to make sure we do not proceed when + setting a configuration variable failed. + + * Handling of errors while writing into our internal asynchronous + process has been made more robust, which reduces flakiness in our + tests. + + * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a + rev, i.e. the object named by the the pathname with wildcard + characters in a tree object. + + * "git rev-parse --git-common-dir" used in the worktree feature + misbehaved when run from a subdirectory. + + * The "v(iew)" subcommand of the interactive "git am -i" command was + broken in 2.6.0 timeframe when the command was rewritten in C. + + * "git merge-tree" used to mishandle "both sides added" conflict with + its own "create a fake ancestor file that has the common parts of + what both sides have added and do a 3-way merge" logic; this has + been updated to use the usual "3-way merge with an empty blob as + the fake common ancestor file" approach used in the rest of the + system. + + * The memory ownership rule of fill_textconv() API, which was a bit + tricky, has been documented a bit better. + + * The documentation did not clearly state that the 'simple' mode is + now the default for "git push" when push.default configuration is + not set. + + * Recent versions of GNU grep are pickier when their input contains + arbitrary binary data, which some of our tests uses. Rewrite the + tests to sidestep the problem. + + * A helper function "git submodule" uses since v2.7.0 to list the + modules that match the pathspec argument given to its subcommands + (e.g. "submodule add <repo> <path>") has been fixed. + + * "git config section.var value" to set a value in per-repository + configuration file failed when it was run outside any repository, + but didn't say the reason correctly. + + * The code to read the pack data using the offsets stored in the pack + idx file has been made more carefully check the validity of the + data in the idx. + +Also includes documentation and test updates. diff --git a/Documentation/RelNotes/2.7.4.txt b/Documentation/RelNotes/2.7.4.txt new file mode 100644 index 0000000000..883ae896fe --- /dev/null +++ b/Documentation/RelNotes/2.7.4.txt @@ -0,0 +1,11 @@ +Git v2.7.4 Release Notes +======================== + +Fixes since v2.7.3 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.8.0.txt b/Documentation/RelNotes/2.8.0.txt new file mode 100644 index 0000000000..25079710fa --- /dev/null +++ b/Documentation/RelNotes/2.8.0.txt @@ -0,0 +1,439 @@ +Git 2.8 Release Notes +===================== + +Backward compatibility note +--------------------------- + +The rsync:// transport has been removed. + + +Updates since v2.7 +------------------ + +UI, Workflows & Features + + * It turns out "git clone" over rsync transport has been broken when + the source repository has packed references for a long time, and + nobody noticed nor complained about it. + + * "push" learned that its "--delete" option can be shortened to + "-d", just like "branch --delete" and "branch -d" are the same + thing. + + * "git blame" learned to produce the progress eye-candy when it takes + too much time before emitting the first line of the result. + + * "git grep" can now be configured (or told from the command line) + how many threads to use when searching in the working tree files. + + * Some "git notes" operations, e.g. "git log --notes=<note>", should + be able to read notes from any tree-ish that is shaped like a notes + tree, but the notes infrastructure required that the argument must + be a ref under refs/notes/. Loosen it to require a valid ref only + when the operation would update the notes (in which case we must + have a place to store the updated notes tree, iow, a ref). + + * "git grep" by default does not fall back to its "--no-index" + behavior outside a directory under Git's control (otherwise the + user may by mistake end up running a huge recursive search); with a + new configuration (set in $HOME/.gitconfig--by definition this + cannot be set in the config file per project), this safety can be + disabled. + + * "git pull --rebase" has been extended to allow invoking + "rebase -i". + + * "git p4" learned to cope with the type of a file getting changed. + + * "git format-patch" learned to notice format.outputDirectory + configuration variable. This allows "-o <dir>" option to be + omitted on the command line if you always use the same directory in + your workflow. + + * "interpret-trailers" has been taught to optionally update a file in + place, instead of always writing the result to the standard output. + + * Many commands that read files that are expected to contain text + that is generated (or can be edited) by the end user to control + their behavior (e.g. "git grep -f <filename>") have been updated + to be more tolerant to lines that are terminated with CRLF (they + used to treat such a line to contain payload that ends with CR, + which is usually not what the users expect). + + * "git notes merge" used to limit the source of the merged notes tree + to somewhere under refs/notes/ hierarchy, which was too limiting + when inventing a workflow to exchange notes with remote + repositories using remote-tracking notes trees (located in e.g. + refs/remote-notes/ or somesuch). + + * "git ls-files" learned a new "--eol" option to help diagnose + end-of-line problems. + + * "ls-remote" learned an option to show which branch the remote + repository advertises as its primary by pointing its HEAD at. + + * New http.proxyAuthMethod configuration variable can be used to + specify what authentication method to use, as a way to work around + proxies that do not give error response expected by libcurl when + CURLAUTH_ANY is used. Also, the codepath for proxy authentication + has been taught to use credential API to store the authentication + material in user's keyrings. + + * Update the untracked cache subsystem and change its primary UI from + "git update-index" to "git config". + + * There were a few "now I am doing this thing" progress messages in + the TCP connection code that can be triggered by setting a verbose + option internally in the code, but "git fetch -v" and friends never + passed the verbose option down to that codepath. + + * Clean/smudge filters defined in a configuration file of lower + precedence can now be overridden to be a pass-through no-op by + setting the variable to an empty string. + + * A new "<branch>^{/!-<pattern>}" notation can be used to name a + commit that is reachable from <branch> that does not match the + given <pattern>. + + * The "user.useConfigOnly" configuration variable can be used to + force the user to always set user.email & user.name configuration + variables, serving as a reminder for those who work on multiple + projects and do not want to put these in their $HOME/.gitconfig. + + * "git fetch" and friends that make network connections can now be + told to only use ipv4 (or ipv6). + + * Some authentication methods do not need username or password, but + libcurl needs some hint that it needs to perform authentication. + Supplying an empty username and password string is a valid way to + do so, but you can set the http.[<url>.]emptyAuth configuration + variable to achieve the same, if you find it cleaner. + + * You can now set http.[<url>.]pinnedpubkey to specify the pinned + public key when building with recent enough versions of libcURL. + + * The configuration system has been taught to phrase where it found a + bad configuration variable in a better way in its error messages. + "git config" learnt a new "--show-origin" option to indicate where + the values come from. + + * The "credential-cache" daemon process used to run in whatever + directory it happened to start in, but this made umount(2)ing the + filesystem that houses the repository harder; now the process + chdir()s to the directory that house its own socket on startup. + + * When "git submodule update" did not result in fetching the commit + object in the submodule that is referenced by the superproject, the + command learned to retry another fetch, specifically asking for + that commit that may not be connected to the refs it usually + fetches. + + * "git merge-recursive" learned "--no-renames" option to disable its + rename detection logic. + + * Across the transition at around Git version 2.0, the user used to + get a pretty loud warning when running "git push" without setting + push.default configuration variable. We no longer warn because the + transition was completed a long time ago. + + * README has been renamed to README.md and its contents got tweaked + slightly to make it easier on the eyes. + + +Performance, Internal Implementation, Development Support etc. + + * Add a framework to spawn a group of processes in parallel, and use + it to run "git fetch --recurse-submodules" in parallel. + + * A slight update to the Makefile to mark ".PHONY" targets as such + correctly. + + * In-core storage of the reverse index for .pack files (which lets + you go from a pack offset to an object name) has been streamlined. + + * d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like + $GIT_DIR, 2015-06-26) attempted to work around a glitch in alias + handling by overwriting GIT_WORK_TREE environment variable to + affect subprocesses when set_git_work_tree() gets called, which + resulted in a rather unpleasant regression to "clone" and "init". + Try to address the same issue by always restoring the environment + and respawning the real underlying command when handling alias. + + * The low-level code that is used to create symbolic references has + been updated to share more code with the code that deals with + normal references. + + * strbuf_getline() and friends have been redefined to make it easier + to identify which callsite of (new) strbuf_getline_lf() should + allow and silently ignore carriage-return at the end of the line to + help users on DOSsy systems. + + * "git shortlog" used to accumulate various pieces of information + regardless of what was asked to be shown in the final output. It + has been optimized by noticing what need not to be collected + (e.g. there is no need to collect the log messages when showing + only the number of changes). + + * "git checkout $branch" (and other operations that share the same + underlying machinery) has been optimized. + + * Automated tests in Travis CI environment has been optimized by + persisting runtime statistics of previous "prove" run, executing + tests that take longer before other ones; this reduces the total + wallclock time. + + * Test scripts have been updated to remove assumptions that are not + portable between Git for POSIX and Git for Windows, or to skip ones + with expectations that are not satisfiable on Git for Windows. + + * Some calls to strcpy(3) triggers a false warning from static + analyzers that are less intelligent than humans, and reducing the + number of these false hits helps us notice real issues. A few + calls to strcpy(3) in a couple of protrams that are already safe + has been rewritten to avoid false warnings. + + * The "name_path" API was an attempt to reduce the need to construct + the full path out of a series of path components while walking a + tree hierarchy, but over time made less efficient because the path + needs to be flattened, e.g. to be compared with another path that + is already flat. The API has been removed and its users have been + rewritten to simplify the overall code complexity. + + * Help those who debug http(s) part of the system. + (merge 0054045 sp/remote-curl-ssl-strerror later to maint). + + * The internal API to interact with "remote.*" configuration + variables has been streamlined. + + * The ref-filter's format-parsing code has been refactored, in + preparation for "branch --format" and friends. + + * Traditionally, the tests that try commands that work on the + contents in the working tree were named with "worktree" in their + filenames, but with the recent addition of "git worktree" + subcommand, whose tests are also named similarly, it has become + harder to tell them apart. The traditional tests have been renamed + to use "work-tree" instead in an attempt to differentiate them. + (merge 5549029 mg/work-tree-tests later to maint). + + * Many codepaths forget to check return value from git_config_set(); + the function is made to die() to make sure we do not proceed when + setting a configuration variable failed. + (merge 3d18064 ps/config-error later to maint). + + * Handling of errors while writing into our internal asynchronous + process has been made more robust, which reduces flakiness in our + tests. + (merge 43f3afc jk/epipe-in-async later to maint). + + * There is a new DEVELOPER knob that enables many compiler warning + options in the Makefile. + + * The way the test scripts configure the Apache web server has been + updated to work also for Apache 2.4 running on RedHat derived + distros. + + * Out of maintenance gcc on OSX 10.6 fails to compile the code in + 'master'; work it around by using clang by default on the platform. + + * The "name_path" API was an attempt to reduce the need to construct + the full path out of a series of path components while walking a + tree hierarchy, but over time made less efficient because the path + needs to be flattened, e.g. to be compared with another path that + is already flat, in many cases. The API has been removed and its + users have been rewritten to simplify the overall code complexity. + This incidentally also closes some heap-corruption holes. + + * Recent versions of GNU grep is pickier than before to decide if a + file is "binary" and refuse to give line-oriented hits when we + expect it to, unless explicitly told with "-a" option. As our + scripted Porcelains use sane_grep wrapper for line-oriented data, + even when the line may contain non-ASCII payload we took from + end-user data, use "grep -a" to implement sane_grep wrapper when + using an implementation of "grep" that takes the "-a" option. + + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.7 +---------------- + +Unless otherwise noted, all the fixes since v2.7 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * An earlier change in 2.5.x-era broke users' hooks and aliases by + exporting GIT_WORK_TREE to point at the root of the working tree, + interfering when they tried to use a different working tree without + setting GIT_WORK_TREE environment themselves. + + * The "exclude_list" structure has the usual "alloc, nr" pair of + fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot + to reset 'alloc' to 0 when it cleared 'nr' to discard the managed + array. + + * Paths that have been told the index about with "add -N" are not + quite yet in the index, but a few commands behaved as if they + already are in a harmful way. + + * "git send-email" was confused by escaped quotes stored in the alias + files saved by "mutt", which has been corrected. + + * A few non-portable C construct have been spotted by clang compiler + and have been fixed. + + * The documentation has been updated to hint the connection between + the '--signoff' option and DCO. + + * "git reflog" incorrectly assumed that all objects that used to be + at the tip of a ref must be commits, which caused it to segfault. + + * The ignore mechanism saw a few regressions around untracked file + listing and sparse checkout selection areas in 2.7.0; the change + that is responsible for the regression has been reverted. + + * Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR + (e.g. COMMIT_EDITMSG) that is meant to be left after the command is + done. This however did not work well if the repository is set to + be shared with core.sharedRepository and the umask of the previous + user is tighter. They have been made to work better by calling + unlink(2) and retrying after fopen(3) fails with EPERM. + + * Asking gitweb for a nonexistent commit left a warning in the server + log. + + Somebody may want to follow this up with an additional test, perhaps? + IIRC, we do test that no Perl warnings are given to the server log, + so this should have been caught if our test coverage were good. + + * "git rebase", unlike all other callers of "gc --auto", did not + ignore the exit code from "gc --auto". + + * Many codepaths that run "gc --auto" before exiting kept packfiles + mapped and left the file descriptors to them open, which was not + friendly to systems that cannot remove files that are open. They + now close the packs before doing so. + + * A recent optimization to filter-branch in v2.7.0 introduced a + regression when --prune-empty filter is used, which has been + corrected. + + * The description for SANITY prerequisite the test suite uses has + been clarified both in the comment and in the implementation. + + * "git tag" started listing a tag "foo" as "tags/foo" when a branch + named "foo" exists in the same repository; remove this unnecessary + disambiguation, which is a regression introduced in v2.7.0. + + * The way "git svn" uses auth parameter was broken by Subversion + 1.9.0 and later. + + * The "split" subcommand of "git subtree" (in contrib/) incorrectly + skipped merges when it shouldn't, which was corrected. + + * A few options of "git diff" did not work well when the command was + run from a subdirectory. + + * The command line completion learned a handful of additional options + and command specific syntax. + + * dirname() emulation has been added, as Msys2 lacks it. + + * The underlying machinery used by "ls-files -o" and other commands + has been taught not to create empty submodule ref cache for a + directory that is not a submodule. This removes a ton of wasted + CPU cycles. + + * "git worktree" had a broken code that attempted to auto-fix + possible inconsistency that results from end-users moving a + worktree to different places without telling Git (the original + repository needs to maintain back-pointers to its worktrees, + but "mv" run by end-users who are not familiar with that fact + will obviously not adjust them), which actually made things + worse when triggered. + + * The low-level merge machinery has been taught to use CRLF line + termination when inserting conflict markers to merged contents that + are themselves CRLF line-terminated. + + * "git push --force-with-lease" has been taught to report if the push + needed to force (or fast-forwarded). + + * The emulated "yes" command used in our test scripts has been + tweaked not to spend too much time generating unnecessary output + that is not used, to help those who test on Windows where it would + not stop until it fills the pipe buffer due to lack of SIGPIPE. + + * The documentation for "git clean" has been corrected; it mentioned + that .git/modules/* are removed by giving two "-f", which has never + been the case. + + * The vimdiff backend for "git mergetool" has been tweaked to arrange + and number buffers in the order that would match the expectation of + majority of people who read left to right, then top down and assign + buffers 1 2 3 4 "mentally" to local base remote merge windows based + on that order. + + * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a + rev, i.e. the object named by the the pathname with wildcard + characters in a tree object. + (merge aac4fac nd/dwim-wildcards-as-pathspecs later to maint). + + * "git rev-parse --git-common-dir" used in the worktree feature + misbehaved when run from a subdirectory. + (merge 17f1365 nd/git-common-dir-fix later to maint). + + * "git worktree add -B <branchname>" did not work. + + * The "v(iew)" subcommand of the interactive "git am -i" command was + broken in 2.6.0 timeframe when the command was rewritten in C. + (merge 708b8cc jc/am-i-v-fix later to maint). + + * "git merge-tree" used to mishandle "both sides added" conflict with + its own "create a fake ancestor file that has the common parts of + what both sides have added and do a 3-way merge" logic; this has + been updated to use the usual "3-way merge with an empty blob as + the fake common ancestor file" approach used in the rest of the + system. + (merge 907681e jk/no-diff-emit-common later to maint). + + * The memory ownership rule of fill_textconv() API, which was a bit + tricky, has been documented a bit better. + (merge a64e6a4 jk/more-comments-on-textconv later to maint). + + * Update various codepaths to avoid manually-counted malloc(). + (merge 08c95df jk/tighten-alloc later to maint). + + * The documentation did not clearly state that the 'simple' mode is + now the default for "git push" when push.default configuration is + not set. + (merge f6b1fb3 mm/push-simple-doc later to maint). + + * Recent versions of GNU grep are pickier when their input contains + arbitrary binary data, which some of our tests uses. Rewrite the + tests to sidestep the problem. + (merge 3b1442d jk/grep-binary-workaround-in-test later to maint). + + * A helper function "git submodule" uses since v2.7.0 to list the + modules that match the pathspec argument given to its subcommands + (e.g. "submodule add <repo> <path>") has been fixed. + (merge 2b56bb7 sb/submodule-module-list-fix later to maint). + + * "git config section.var value" to set a value in per-repository + configuration file failed when it was run outside any repository, + but didn't say the reason correctly. + (merge 638fa62 js/config-set-in-non-repository later to maint). + + * The code to read the pack data using the offsets stored in the pack + idx file has been made more carefully check the validity of the + data in the idx. + (merge 7465feb jk/pack-idx-corruption-safety later to maint). + + * Other minor clean-ups and documentation updates + (merge f459823 ak/extract-argv0-last-dir-sep later to maint). + (merge 63ca1c0 ak/git-strip-extension-from-dashed-command later to maint). + (merge 4867f11 ps/plug-xdl-merge-leak later to maint). + (merge 4938686 dt/initial-ref-xn-commit-doc later to maint). + (merge 9537f21 ma/update-hooks-sample-typofix later to maint). diff --git a/Documentation/RelNotes/2.8.1.txt b/Documentation/RelNotes/2.8.1.txt new file mode 100644 index 0000000000..ef6d80b008 --- /dev/null +++ b/Documentation/RelNotes/2.8.1.txt @@ -0,0 +1,9 @@ +Git v2.8.1 Release Notes +======================== + +Fixes since v2.8 +---------------- + + * "make rpmbuild" target was broken as its input, git.spec.in, was + not updated to match a file it describes that has been renamed + recently. This has been fixed. diff --git a/Documentation/RelNotes/2.8.2.txt b/Documentation/RelNotes/2.8.2.txt new file mode 100644 index 0000000000..447b1933a8 --- /dev/null +++ b/Documentation/RelNotes/2.8.2.txt @@ -0,0 +1,70 @@ +Git v2.8.2 Release Notes +======================== + +Fixes since v2.8.1 +------------------ + + * The embedded args argv-array in the child process is used to build + the command line to run pack-objects instead of using a separate + array of strings. + + * Bunch of tests on "git clone" has been renumbered for better + organization. + + * The tests that involve running httpd leaked the system-wide + configuration in /etc/gitconfig to the tested environment. + + * "index-pack --keep=<msg>" was broken since v2.1.0 timeframe. + + * "git config --get-urlmatch", unlike other variants of the "git + config --get" family, did not signal error with its exit status + when there was no matching configuration. + + * The "--local-env-vars" and "--resolve-git-dir" options of "git + rev-parse" failed to work outside a repository when the command's + option parsing was rewritten in 1.8.5 era. + + * Fetching of history by naming a commit object name directly didn't + work across remote-curl transport. + + * A small memory leak in an error codepath has been plugged in xdiff + code. + + * strbuf_getwholeline() did not NUL-terminate the buffer on certain + corner cases in its error codepath. + + * The startup_info data, which records if we are working inside a + repository (among other things), are now uniformly available to Git + subcommand implementations, and Git avoids attempting to touch + references when we are not in a repository. + + * "git mergetool" did not work well with conflicts that both sides + deleted. + + * "git send-email" had trouble parsing alias file in mailrc format + when lines in it had trailing whitespaces on them. + + * When "git merge --squash" stopped due to conflict, the concluding + "git commit" failed to read in the SQUASH_MSG that shows the log + messages from all the squashed commits. + + * "git merge FETCH_HEAD" dereferenced NULL pointer when merging + nothing into an unborn history (which is arguably unusual usage, + which perhaps was the reason why nobody noticed it). + + * Build updates for MSVC. + + * "git diff -M" used to work better when two originally identical + files A and B got renamed to X/A and X/B by pairing A to X/A and B + to X/B, but this was broken in the 2.0 timeframe. + + * "git send-pack --all <there>" was broken when its command line + option parsing was written in the 2.6 timeframe. + + * When running "git blame $path" with unnormalized data in the index + for the path, the data in the working tree was blamed, even though + "git add" would not have changed what is already in the index, due + to "safe crlf" that disables the line-end conversion. It has been + corrected. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.8.3.txt b/Documentation/RelNotes/2.8.3.txt new file mode 100644 index 0000000000..6030f38063 --- /dev/null +++ b/Documentation/RelNotes/2.8.3.txt @@ -0,0 +1,61 @@ +Git v2.8.3 Release Notes +======================== + +Fixes since v2.8.2 +------------------ + + * "git send-email" now uses a more readable timestamps when + formulating a message ID. + + * The repository set-up sequence has been streamlined (the biggest + change is that there is no longer git_config_early()), so that we + do not attempt to look into refs/* when we know we do not have a + Git repository. + + * When "git worktree" feature is in use, "git branch -d" allowed + deletion of a branch that is checked out in another worktree + + * When "git worktree" feature is in use, "git branch -m" renamed a + branch that is checked out in another worktree without adjusting + the HEAD symbolic ref for the worktree. + + * "git format-patch --help" showed `-s` and `--no-patch` as if these + are valid options to the command. We already hide `--patch` option + from the documentation, because format-patch is about showing the + diff, and the documentation now hides these options as well. + + * A change back in version 2.7 to "git branch" broke display of a + symbolic ref in a non-standard place in the refs/ hierarchy (we + expect symbolic refs to appear in refs/remotes/*/HEAD to point at + the primary branch the remote has, and as .git/HEAD to point at the + branch we locally checked out). + + * A partial rewrite of "git submodule" in the 2.7 timeframe changed + the way the gitdir: pointer in the submodules point at the real + repository location to use absolute paths by accident. This has + been corrected. + + * "git commit" misbehaved in a few minor ways when an empty message + is given via -m '', all of which has been corrected. + + * Support for CRAM-MD5 authentication method in "git imap-send" did + not work well. + + * The socks5:// proxy support added back in 2.6.4 days was not aware + that socks5h:// proxies behave differently. + + * "git config" had a codepath that tried to pass a NULL to + printf("%s"), which nobody seems to have noticed. + + * On Cygwin, object creation uses the "create a temporary and then + rename it to the final name" pattern, not "create a temporary, + hardlink it to the final name and then unlink the temporary" + pattern. + + This is necessary to use Git on Windows shared directories, and is + already enabled for the MinGW and plain Windows builds. It also + has been used in Cygwin packaged versions of Git for quite a while. + See http://thread.gmane.org/gmane.comp.version-control.git/291853 + and http://thread.gmane.org/gmane.comp.version-control.git/275680. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index a09969ba08..02cb6845cd 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -63,13 +63,19 @@ include::line-range-format.txt[] `-` to make the command read from the standard input). --date <format>:: - The value is one of the following alternatives: - {relative,local,default,iso,rfc,short}. If --date is not + Specifies the format used to output dates. If --date is not provided, the value of the blame.date config variable is used. If the blame.date config variable is also not set, the - iso format is used. For more information, See the discussion + iso format is used. For supported values, see the discussion of the --date option at linkgit:git-log[1]. +--[no-]progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal. This flag + enables progress reporting even if not attached to a + terminal. Can't use `--progress` together with `--porcelain` + or `--incremental`. + -M|<num>|:: Detect moved or copied lines within a file. When a commit moves or copies a block of lines (e.g. the original file diff --git a/Documentation/config.txt b/Documentation/config.txt index fec0dea5d0..2cd6bdd7d2 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -308,6 +308,15 @@ core.trustctime:: crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. +core.untrackedCache:: + Determines what to do about the untracked cache feature of the + index. It will be kept, if this variable is unset or set to + `keep`. It will automatically be added if set to `true`. And + it will automatically be removed, if set to `false`. Before + setting it to `true`, you should check that mtime is working + properly on your system. + See linkgit:git-update-index[1]. `keep` by default. + core.checkStat:: Determines which stat fields to match between the index and work tree. The user can set this to 'default' or @@ -870,6 +879,8 @@ When preserve, also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + +When the value is `interactive`, the rebase is run in interactive mode. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -1122,6 +1133,9 @@ credential.<url>.*:: example.com. See linkgit:gitcredentials[7] for details on how URLs are matched. +credentialCache.ignoreSIGHUP:: + Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting. + include::diff-config.txt[] difftool.<tool>.path:: @@ -1240,6 +1254,10 @@ format.coverLetter:: format-patch is invoked, but in addition can be set to "auto", to generate a cover-letter only when there's more than one patch. +format.outputDirectory:: + Set a custom directory to store the resulting files instead of the + current working directory. + filter.<driver>.clean:: The command which is used to convert the content of a worktree file to a blob upon checkin. See linkgit:gitattributes[5] for @@ -1447,6 +1465,14 @@ grep.extendedRegexp:: option is ignored when the 'grep.patternType' option is set to a value other than 'default'. +grep.threads:: + Number of grep worker threads to use. + See `grep.threads` in linkgit:git-grep[1] for more information. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. + gpg.program:: Use this custom program instead of "gpg" found on $PATH when making or verifying a PGP signature. The program must support the @@ -1593,9 +1619,40 @@ help.htmlPath:: http.proxy:: Override the HTTP proxy, normally configured using the 'http_proxy', - 'https_proxy', and 'all_proxy' environment variables (see - `curl(1)`). This can be overridden on a per-remote basis; see - remote.<name>.proxy + 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In + addition to the syntax understood by curl, it is possible to specify a + proxy string with a user name but no password, in which case git will + attempt to acquire one in the same way it does for other credentials. See + linkgit:gitcredentials[7] for more information. The syntax thus is + '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden + on a per-remote basis; see remote.<name>.proxy + +http.proxyAuthMethod:: + Set the method with which to authenticate against the HTTP proxy. This + only takes effect if the configured proxy string contains a user name part + (i.e. is of the form 'user@host' or 'user@host:port'). This can be + overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. + Both can be overridden by the 'GIT_HTTP_PROXY_AUTHMETHOD' environment + variable. Possible values are: ++ +-- +* `anyauth` - Automatically pick a suitable authentication method. It is + assumed that the proxy answers an unauthenticated request with a 407 + status code and one or more Proxy-authenticate headers with supported + authentication methods. This is the default. +* `basic` - HTTP Basic authentication +* `digest` - HTTP Digest authentication; this prevents the password from being + transmitted to the proxy in clear text +* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option + of `curl(1)`) +* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) +-- + +http.emptyAuth:: + Attempt authentication without seeking a username or password. This + can be used to attempt GSS-Negotiate authentication without specifying + a username in the URL, as libcurl normally requires a username for + authentication. http.cookieFile:: File containing previously stored cookie lines which should be used @@ -1676,6 +1733,14 @@ http.sslCAPath:: with when fetching or pushing over HTTPS. Can be overridden by the 'GIT_SSL_CAPATH' environment variable. +http.pinnedpubkey:: + Public key of the https service. It may either be the filename of + a PEM or DER encoded public key file or a string starting with + 'sha256//' followed by the base64 encoded sha256 hash of the + public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will + exit with an error if this option is set but not supported by + cURL. + http.sslTry:: Attempt to use AUTH SSL/TLS and encrypted data transfers when connecting via regular FTP protocol. This might be needed @@ -1829,9 +1894,7 @@ log.abbrevCommit:: log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `--date` option. Possible values are `relative`, `local`, - `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] - for details. + `--date` option. See linkgit:git-log[1] for details. log.decorate:: Print out the ref names of any commits that are shown by the log @@ -2073,7 +2136,7 @@ pack.indexVersion:: larger than 2 GB. + If you have an old Git that does not understand the version 2 `*.idx` file, -cloning or fetching over a non native protocol (e.g. "http" and "rsync") +cloning or fetching over a non native protocol (e.g. "http") that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your older version of Git. If the `*.pack` file is smaller than 2 GB, however, @@ -2148,6 +2211,8 @@ When preserve, also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + +When the value is `interactive`, the rebase is run in interactive mode. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -2228,6 +2293,20 @@ push.gpgSign:: override a value from a lower-priority config file. An explicit command-line flag always overrides this config option. +push.recurseSubmodules:: + Make sure all submodule commits used by the revisions to be pushed + are available on a remote-tracking branch. If the value is 'check' + then Git will verify that all submodule commits that changed in the + revisions to be pushed are available on at least one remote of the + submodule. If any commits are missing, the push will be aborted and + exit with non-zero status. If the value is 'on-demand' then all + submodules that changed in the revisions to be pushed will be + pushed. If on-demand was not able to push all necessary revisions + it will also be aborted and exit with non-zero status. If the value + is 'no' then default behavior of ignoring submodules when pushing + is retained. You may override this configuration at time of push by + specifying '--recurse-submodules=check|on-demand|no'. + rebase.stat:: Whether to show a diffstat of what changed upstream since the last rebase. False by default. @@ -2392,6 +2471,11 @@ remote.<name>.proxy:: the proxy to use for that remote. Set to the empty string to disable proxying for that remote. +remote.<name>.proxyAuthMethod:: + For remotes that require curl (http, https and ftp), the method to use for + authenticating against the proxy in use (probably set in + `remote.<name>.proxy`). See `http.proxyAuthMethod`. + remote.<name>.fetch:: The default set of "refspec" for linkgit:git-fetch[1]. See linkgit:git-fetch[1]. @@ -2593,6 +2677,16 @@ status.submoduleSummary:: submodule summary' command, which shows a similar output but does not honor these settings. +stash.showPatch:: + If this is set to true, the `git stash show` command without an + option will show the stash in patch form. Defaults to false. + See description of 'show' command in linkgit:git-stash[1]. + +stash.showStat:: + If this is set to true, the `git stash show` command without an + option will show diffstat of the stash. Defaults to true. + See description of 'show' command in linkgit:git-stash[1]. + submodule.<name>.path:: submodule.<name>.url:: The path within this project and URL for a submodule. These @@ -2665,6 +2759,15 @@ You may also include a `!` in front of the ref name to negate the entry, explicitly exposing it, even if an earlier entry marked it as hidden. If you have multiple hideRefs values, later entries override earlier ones (and entries in more-specific config files override less-specific ones). ++ +If a namespace is in use, the namespace prefix is stripped from each +reference before it is matched against `transfer.hiderefs` patterns. +For example, if `refs/heads/master` is specified in `transfer.hideRefs` and +the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` +is omitted from the advertisements but `refs/heads/master` and +`refs/namespaces/bar/refs/heads/master` are still advertised as so-called +"have" lines. In order to match refs before stripping, add a `^` in front of +the ref name. If you combine `!` and `^`, `!` must be specified first. transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are @@ -2741,6 +2844,16 @@ user.name:: Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' environment variables. See linkgit:git-commit-tree[1]. +user.useConfigOnly:: + Instruct Git to avoid trying to guess defaults for 'user.email' + and 'user.name', and instead retrieve the values only from the + configuration. For example, if you have multiple email addresses + and would like to use a different one for each repository, then + with this configuration option set to `true` in the global config + along with a name, Git will prompt you to set up an email before + making new commits in a newly cloned repository. + Defaults to `false`. + user.signingKey:: If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the key you want it to automatically when creating a signed tag or diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 306b7e3604..4b0318e2ac 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -26,12 +26,12 @@ ifndef::git-format-patch[] ifdef::git-diff[] This is the default. endif::git-diff[] -endif::git-format-patch[] -s:: --no-patch:: Suppress diff output. Useful for commands like `git show` that show the patch by default, or to cancel the effect of `--patch`. +endif::git-format-patch[] -U<n>:: --unified=<n>:: @@ -286,8 +286,8 @@ endif::git-format-patch[] ifndef::git-format-patch[] --check:: - Warn if changes introduce whitespace errors. What are - considered whitespace errors is controlled by `core.whitespace` + Warn if changes introduce conflict markers or whitespace errors. + What are considered whitespace errors is controlled by `core.whitespace` configuration. By default, trailing whitespaces (including lines that solely consist of whitespaces) and a space character that is immediately followed by a tab character inside the diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 45583d8454..036edfb099 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -8,10 +8,11 @@ option old data in `.git/FETCH_HEAD` will be overwritten. --depth=<depth>:: - Deepen or shorten the history of a 'shallow' repository created by - `git clone` with `--depth=<depth>` option (see linkgit:git-clone[1]) - to the specified number of commits from the tip of each remote - branch history. Tags for the deepened commits are not fetched. + Limit fetching to the specified number of commits from the tip of + each remote branch history. If fetching to a 'shallow' repository + created by `git clone` with `--depth=<depth>` option (see + linkgit:git-clone[1]), deepen or shorten the history to the specified + number of commits. Tags for the deepened commits are not fetched. --unshallow:: If the source repository is complete, convert a shallow @@ -100,6 +101,13 @@ ifndef::git-pull[] reference to a commit that isn't already in the local submodule clone. +-j:: +--jobs=<n>:: + Number of parallel children to be used for fetching submodules. + Each will fetch from different submodules, such that fetching many + submodules will be faster. By default submodules will be fetched + one at a time. + --no-recurse-submodules:: Disable recursive fetching of submodules (this has the same effect as using the '--recurse-submodules=no' option). @@ -150,3 +158,11 @@ endif::git-pull[] by default when it is attached to a terminal, unless -q is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. + +-4:: +--ipv4:: + Use IPv4 addresses only, ignoring IPv6 addresses. + +-6:: +--ipv6:: + Use IPv6 addresses only, ignoring IPv4 addresses. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index fe5282f130..6a96a669c2 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -24,7 +24,7 @@ remove paths that do not exist in the working tree anymore. The "index" holds a snapshot of the content of the working tree, and it is this snapshot that is taken as the contents of the next commit. Thus -after making any changes to the working directory, and before running +after making any changes to the working tree, and before running the commit command, you must use the `add` command to add any new or modified files to the index. diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 452c1feb23..13cdd7f3b6 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -35,6 +35,7 @@ OPTIONS --signoff:: Add a `Signed-off-by:` line to the commit message, using the committer identity of yourself. + See the signoff option in linkgit:git-commit[1] for more information. -k:: --keep:: diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index d9ed6a1a4e..8ddb207409 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -13,7 +13,7 @@ SYNOPSIS [--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse] [--allow-binary-replacement | --binary] [--reject] [-z] [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached] - [--ignore-space-change | --ignore-whitespace ] + [--ignore-space-change | --ignore-whitespace] [--whitespace=(nowarn|warn|fix|error|error-all)] [--exclude=<path>] [--include=<path>] [--directory=<root>] [--verbose] [--unsafe-paths] [<patch>...] @@ -21,6 +21,8 @@ SYNOPSIS DESCRIPTION ----------- Reads the supplied diff output (i.e. "a patch") and applies it to files. +When running from a subdirectory in a repository, patched paths +outside the directory are ignored. With the `--index` option the patch is also applied to the index, and with the `--cached` option the patch is only applied to the index. Without these options, the command applies the patch only to files, diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 1b7a97b1db..7e79aaedeb 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -16,9 +16,11 @@ DESCRIPTION The command takes various subcommands, and different options depending on the subcommand: - git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] - git bisect bad [<rev>] - git bisect good [<rev>...] + git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>] + [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] + git bisect (bad|new) [<rev>] + git bisect (good|old) [<rev>...] + git bisect terms [--term-good | --term-bad] git bisect skip [(<rev>|<range>)...] git bisect reset [<commit>] git bisect visualize @@ -36,6 +38,13 @@ whether the selected commit is "good" or "bad". It continues narrowing down the range until it finds the exact commit that introduced the change. +In fact, `git bisect` can be used to find the commit that changed +*any* property of your project; e.g., the commit that fixed a bug, or +the commit that caused a benchmark's performance to improve. To +support this more general usage, the terms "old" and "new" can be used +in place of "good" and "bad", or you can choose your own terms. See +section "Alternate terms" below for more information. + Basic bisect commands: start, bad, good ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -111,6 +120,79 @@ bad revision, while `git bisect reset HEAD` will leave you on the current bisection commit and avoid switching commits at all. +Alternate terms +~~~~~~~~~~~~~~~ + +Sometimes you are not looking for the commit that introduced a +breakage, but rather for a commit that caused a change between some +other "old" state and "new" state. For example, you might be looking +for the commit that introduced a particular fix. Or you might be +looking for the first commit in which the source-code filenames were +finally all converted to your company's naming standard. Or whatever. + +In such cases it can be very confusing to use the terms "good" and +"bad" to refer to "the state before the change" and "the state after +the change". So instead, you can use the terms "old" and "new", +respectively, in place of "good" and "bad". (But note that you cannot +mix "good" and "bad" with "old" and "new" in a single session.) + +In this more general usage, you provide `git bisect` with a "new" +commit has some property and an "old" commit that doesn't have that +property. Each time `git bisect` checks out a commit, you test if that +commit has the property. If it does, mark the commit as "new"; +otherwise, mark it as "old". When the bisection is done, `git bisect` +will report which commit introduced the property. + +To use "old" and "new" instead of "good" and bad, you must run `git +bisect start` without commits as argument and then run the following +commands to add the commits: + +------------------------------------------------ +git bisect old [<rev>] +------------------------------------------------ + +to indicate that a commit was before the sought change, or + +------------------------------------------------ +git bisect new [<rev>...] +------------------------------------------------ + +to indicate that it was after. + +To get a reminder of the currently used terms, use + +------------------------------------------------ +git bisect terms +------------------------------------------------ + +You can get just the old (respectively new) term with `git bisect term +--term-old` or `git bisect term --term-good`. + +If you would like to use your own terms instead of "bad"/"good" or +"new"/"old", you can choose any names you like (except existing bisect +subcommands like `reset`, `start`, ...) by starting the +bisection using + +------------------------------------------------ +git bisect start --term-old <term-old> --term-new <term-new> +------------------------------------------------ + +For example, if you are looking for a commit that introduced a +performance regression, you might use + +------------------------------------------------ +git bisect start --term-old fast --term-new slow +------------------------------------------------ + +Or if you are looking for the commit that fixed a bug, you might use + +------------------------------------------------ +git bisect start --term-new fixed --term-old broken +------------------------------------------------ + +Then, use `git bisect <term-old>` and `git bisect <term-new>` instead +of `git bisect good` and `git bisect bad` to mark commits. + Bisect visualize ~~~~~~~~~~~~~~~~ @@ -387,6 +469,21 @@ In this case, when 'git bisect run' finishes, bisect/bad will refer to a commit has at least one parent whose reachable graph is fully traversable in the sense required by 'git pack objects'. +* Look for a fix instead of a regression in the code ++ +------------ +$ git bisect start +$ git bisect new HEAD # current commit is marked as new +$ git bisect old HEAD~10 # the tenth commit from now is marked as old +------------ ++ +or: +------------ +$ git bisect start --term-old broken --term-new fixed +$ git bisect fixed +$ git bisect broken HEAD~10 +------------ + Getting help ~~~~~~~~~~~~ diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index e6e947c808..ba5417567c 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -10,7 +10,8 @@ SYNOPSIS [verse] 'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] [-L <range>] [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] - [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file> + [--progress] [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] + [--] <file> DESCRIPTION ----------- diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index bbbade4f51..4a7037f1c8 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -11,7 +11,8 @@ SYNOPSIS 'git branch' [--color[=<when>] | --no-color] [-r | -a] [--list] [-v [--abbrev=<length> | --no-abbrev]] [--column[=<options>] | --no-column] - [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] + [(--merged | --no-merged | --contains) [<commit>]] [--sort=<key>] + [--points-at <object>] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] 'git branch' --unset-upstream [<branchname>] @@ -231,6 +232,19 @@ start-point is either a local or remote-tracking branch. The new name for an existing branch. The same restrictions as for <branchname> apply. +--sort=<key>:: + Sort based on the key given. Prefix `-` to sort in descending + order of the value. You may use the --sort=<key> option + multiple times, in which case the last key becomes the primary + key. The keys supported are the same as those in `git + for-each-ref`. Sort order defaults to sorting based on the + full refname (including `refs/...` prefix). This lists + detached HEAD (if present) first, then local branches and + finally remote-tracking branches. + + +--points-at <object>:: + Only list branches of the given object. Examples -------- diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 0417562eb7..3a8120c3b3 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -20,7 +20,7 @@ DESCRIPTION Some workflows require that one or more branches of development on one machine be replicated on another machine, but the two machines cannot be directly connected, and therefore the interactive Git protocols (git, -ssh, rsync, http) cannot be used. This command provides support for +ssh, http) cannot be used. This command provides support for 'git fetch' and 'git pull' to operate by packaging objects and references in an archive at the originating machine, then importing those into another repository using 'git fetch' and 'git pull' diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index e269fb1108..5e5273e073 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -107,6 +107,12 @@ OPTIONS --quiet:: Quiet, suppress feedback messages. +--[no-]progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless `--quiet` + is specified. This flag enables progress reporting even if not + attached to a terminal, regardless of `--quiet`. + -f:: --force:: When switching branches, proceed even if the index or the diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 77da29a474..6154e57238 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -100,6 +100,7 @@ effect to your index in a row. -s:: --signoff:: Add Signed-off-by line at the end of the commit message. + See the signoff option in linkgit:git-commit[1] for more information. -S[<keyid>]:: --gpg-sign[=<keyid>]:: diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 641681f61a..51a7e26a8e 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -37,9 +37,7 @@ OPTIONS to false, 'git clean' will refuse to delete files or directories unless given -f, -n or -i. Git will refuse to delete directories with .git sub directory or file unless a second -f - is given. This affects also git submodules where the storage area - of the removed submodule under .git/modules/ is not removed until - -f is given twice. + is given. -i:: --interactive:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index f1f2a3f7ea..b7c467a001 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -104,14 +104,18 @@ objects from the source repository into a pack in the cloned repository. --dissociate:: Borrow the objects from reference repositories specified with the `--reference` options only to reduce network - transfer and stop borrowing from them after a clone is made - by making necessary local copies of borrowed objects. + transfer, and stop borrowing from them after a clone is made + by making necessary local copies of borrowed objects. This + option can also be used when cloning locally from a + repository that already borrows objects from another + repository--the new repository will borrow objects from the + same repository, and this option can be used to stop the + borrowing. --quiet:: -q:: Operate quietly. Progress is not reported to the standard - error stream. This flag is also passed to the `rsync' - command when given. + error stream. --verbose:: -v:: @@ -185,15 +189,14 @@ objects from the source repository into a pack in the cloned repository. --depth <depth>:: Create a 'shallow' clone with a history truncated to the - specified number of revisions. + specified number of commits. Implies `--single-branch` unless + `--no-single-branch` is given to fetch the histories near the + tips of all branches. --[no-]single-branch:: Clone only the history leading to the tip of a single branch, either specified by the `--branch` option or the primary - branch remote's `HEAD` points at. When creating a shallow - clone with the `--depth` option, this is the default, unless - `--no-single-branch` is given to fetch the histories near the - tips of all branches. + branch remote's `HEAD` points at. Further fetches into the resulting repository will only update the remote-tracking branch for the branch this option was used for the initial cloning. If the HEAD at the remote did not point at any diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 7f34a5b331..9ec6b3cc17 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -154,7 +154,11 @@ OPTIONS -s:: --signoff:: Add Signed-off-by line by the committer at the end of the commit - log message. + log message. The meaning of a signoff depends on the project, + but it typically certifies that committer has + the rights to submit this work under the same license and + agrees to a Developer Certificate of Origin + (see http://developercertificate.org/ for more information). -n:: --no-verify:: diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 2608ca74ac..6fc08e3d89 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -9,18 +9,18 @@ git-config - Get and set repository or global options SYNOPSIS -------- [verse] -'git config' [<file-option>] [type] [-z|--null] name [value [value_regex]] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] name [value [value_regex]] 'git config' [<file-option>] [type] --add name value 'git config' [<file-option>] [type] --replace-all name value [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get name [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get-all name [value_regex] -'git config' [<file-option>] [type] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] --get name [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] --get-all name [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get-urlmatch name URL 'git config' [<file-option>] --unset name [value_regex] 'git config' [<file-option>] --unset-all name [value_regex] 'git config' [<file-option>] --rename-section old_name new_name 'git config' [<file-option>] --remove-section name -'git config' [<file-option>] [-z|--null] [--name-only] -l | --list +'git config' [<file-option>] [--show-origin] [-z|--null] [--name-only] -l | --list 'git config' [<file-option>] --get-color name [default] 'git config' [<file-option>] --get-colorbool name [stdout-is-tty] 'git config' [<file-option>] -e | --edit @@ -58,13 +58,13 @@ that location (you can say '--local' but that is the default). This command will fail with non-zero status upon error. Some exit codes are: -. The config file is invalid (ret=3), -. can not write to the config file (ret=4), -. no section or name was provided (ret=2), -. the section or key is invalid (ret=1), -. you try to unset an option which does not exist (ret=5), -. you try to unset/set an option for which multiple lines match (ret=5), or -. you try to use an invalid regexp (ret=6). +- The config file is invalid (ret=3), +- can not write to the config file (ret=4), +- no section or name was provided (ret=2), +- the section or key is invalid (ret=1), +- you try to unset an option which does not exist (ret=5), +- you try to unset/set an option for which multiple lines match (ret=5), or +- you try to use an invalid regexp (ret=6). On success, the command returns the exit code 0. @@ -86,8 +86,7 @@ OPTIONS found and the last value if multiple key values were found. --get-all:: - Like get, but does not fail if the number of values for the key - is not exactly one. + Like get, but returns all values for a multi-valued key. --get-regexp:: Like --get-all, but interprets the name as a regular expression and @@ -102,7 +101,7 @@ OPTIONS given URL is returned (if no such key exists, the value for section.key is used as a fallback). When given just the section as name, do so for all the keys in the section and - list them. + list them. Returns error code 1 if no value is found. --global:: For writing options: write to global `~/.gitconfig` file @@ -194,6 +193,12 @@ See also <<FILES>>. Output only the names of config variables for `--list` or `--get-regexp`. +--show-origin:: + Augment the output of all queried config options with the + origin type (file, standard input, blob, command line) and + the actual origin (config file path, ref, or blob id if + applicable). + --get-colorbool name [stdout-is-tty]:: Find the color setting for `name` (e.g. `color.diff`) and output @@ -219,7 +224,9 @@ See also <<FILES>>. --[no-]includes:: Respect `include.*` directives in config files when looking up - values. Defaults to on. + values. Defaults to `off` when a specific file is given (e.g., + using `--file`, `--global`, etc) and `on` when searching all + config files. [[FILES]] FILES diff --git a/Documentation/git-credential-cache.txt b/Documentation/git-credential-cache.txt index 89b730632d..96208f822e 100644 --- a/Documentation/git-credential-cache.txt +++ b/Documentation/git-credential-cache.txt @@ -36,7 +36,7 @@ OPTIONS cache daemon if one is not started). Defaults to `~/.git-credential-cache/socket`. If your home directory is on a network-mounted filesystem, you may need to change this to a - local filesystem. + local filesystem. You must specify an absolute path. CONTROLLING THE DAEMON ---------------------- diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 8680f45f8d..239623cc24 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -104,6 +104,10 @@ be in a separate packet, and the list must end with a flush packet. The remote heads to update from. This is relative to $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. ++ +If the remote has enabled the options `uploadpack.allowTipSHA1InWant` or +`uploadpack.allowReachableSHA1InWant`, they may alternatively be 40-hex +sha1s present on the remote. SEE ALSO -------- diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 7f8d9a5b5f..c52578bb87 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -10,6 +10,8 @@ SYNOPSIS [verse] 'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] [(--sort=<key>)...] [--format=<format>] [<pattern>...] + [--points-at <object>] [(--merged | --no-merged) [<object>]] + [--contains [<object>]] DESCRIPTION ----------- @@ -62,6 +64,20 @@ OPTIONS the specified host language. This is meant to produce a scriptlet that can directly be `eval`ed. +--points-at <object>:: + Only list refs which points at the given object. + +--merged [<object>]:: + Only list refs whose tips are reachable from the + specified commit (HEAD if not specified). + +--no-merged [<object>]:: + Only list refs whose tips are not reachable from the + specified commit (HEAD if not specified). + +--contains [<object>]:: + Only list refs which contain the specified commit (HEAD if not + specified). FIELD NAMES ----------- @@ -76,7 +92,11 @@ refname:: The name of the ref (the part after $GIT_DIR/). For a non-ambiguous short name of the ref append `:short`. The option core.warnAmbiguousRefs is used to select the strict - abbreviation mode. + abbreviation mode. If `strip=<N>` is appended, strips `<N>` + slash-separated path components from the front of the refname + (e.g., `%(refname:strip=2)` turns `refs/tags/foo` into `foo`. + `<N>` must be a positive integer. If a displayed ref has fewer + components than `<N>`, the command aborts with an error. objecttype:: The type of the object (`blob`, `tree`, `commit`, `tag`). @@ -111,10 +131,30 @@ color:: Change output color. Followed by `:<colorname>`, where names are described in `color.branch.*`. +align:: + Left-, middle-, or right-align the content between + %(align:...) and %(end). The "align:" is followed by + `width=<width>` and `position=<position>` in any order + separated by a comma, where the `<position>` is either left, + right or middle, default being left and `<width>` is the total + length of the content with alignment. For brevity, the + "width=" and/or "position=" prefixes may be omitted, and bare + <width> and <position> used instead. For instance, + `%(align:<width>,<position>)`. If the contents length is more + than the width then no alignment is performed. If used with + '--quote' everything in between %(align:...) and %(end) is + quoted, but if nested then only the topmost level performs + quoting. + In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can be used to specify the value in the header field. +For commit and tag objects, the special `creatordate` and `creator` +fields will correspond to the appropriate date or name-email-date tuple +from the `committer` or `tagger` fields depending on the object type. +These are intended for working on a mix of annotated and lightweight tags. + Fields that have name-email-date tuple as its value (`author`, `committer`, and `tagger`) can be suffixed with `name`, `email`, and `date` to extract the named component. @@ -123,20 +163,23 @@ The complete message in a commit and tag object is `contents`. Its first line is `contents:subject`, where subject is the concatenation of all lines of the commit message up to the first blank line. The next line is 'contents:body', where body is all of the lines after the first -blank line. Finally, the optional GPG signature is `contents:signature`. +blank line. The optional GPG signature is `contents:signature`. The +first `N` lines of the message is obtained using `contents:lines=N`. -For sorting purposes, fields with numeric values sort in numeric -order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). +For sorting purposes, fields with numeric values sort in numeric order +(`objectsize`, `authordate`, `committerdate`, `creatordate`, `taggerdate`). All other fields are used to sort in their byte-value order. +There is also an option to sort by versions, this can be done by using +the fieldname `version:refname` or its alias `v:refname`. + In any case, a field name that refers to a field inapplicable to the object referred by the ref does not cause an error. It returns an empty string instead. As a special case for the date-type fields, you may specify a format for -the date by adding one of `:default`, `:relative`, `:short`, `:local`, -`:iso8601`, `:rfc2822` or `:raw` to the end of the fieldname; e.g. -`%(taggerdate:relative)`. +the date by adding `:` followed by date format name (see the +values the `--date` option to linkgit::git-rev-list[1] takes). EXAMPLES diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 4035649117..6821441d7d 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -57,7 +57,11 @@ The names of the output files are printed to standard output, unless the `--stdout` option is specified. If `-o` is specified, output files are created in <dir>. Otherwise -they are created in the current working directory. +they are created in the current working directory. The default path +can be set with the 'format.outputDirectory' configuration option. +The `-o` option takes precedence over `format.outputDirectory`. +To store patches in the current working directory even when +`format.outputDirectory` points elsewhere, use `-o .`. By default, the subject of a single patch is "[PATCH] " followed by the concatenation of lines from the commit message up to the first blank @@ -109,6 +113,7 @@ include::diff-options.txt[] --signoff:: Add `Signed-off-by:` line to the commit message, using the committer identity of yourself. + See the signoff option in linkgit:git-commit[1] for more information. --stdout:: Print all commits to the standard output in mbox format, @@ -256,6 +261,10 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. using this option cannot be applied properly, but they are still useful for code review. +--zero-commit:: + Output an all-zero hash in each patch's From header instead + of the hash of the commit. + --root:: Treat the revision argument as a <revision range>, even if it is just a single commit (that would normally be treated as a diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 4a44d6da13..cb0f6cf678 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -23,6 +23,7 @@ SYNOPSIS [--break] [--heading] [-p | --show-function] [-A <post-context>] [-B <pre-context>] [-C <context>] [-W | --function-context] + [--threads <num>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] [ [--[no-]exclude-standard] [--cached | --no-index | --untracked] | <tree>...] @@ -53,9 +54,17 @@ grep.extendedRegexp:: option is ignored when the 'grep.patternType' option is set to a value other than 'default'. +grep.threads:: + Number of grep worker threads to use. If unset (or set to 0), + 8 threads are used by default (for now). + grep.fullName:: If set to true, enable '--full-name' option by default. +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. + OPTIONS ------- @@ -227,6 +236,10 @@ OPTIONS effectively showing the whole function in which the match was found. +--threads <num>:: + Number of grep worker threads to use. + See `grep.threads` in 'CONFIGURATION' for more information. + -f <file>:: Read patterns from <file>, one per line. diff --git a/Documentation/git-interpret-trailers.txt b/Documentation/git-interpret-trailers.txt index 0ecd497c4d..a77b901f1d 100644 --- a/Documentation/git-interpret-trailers.txt +++ b/Documentation/git-interpret-trailers.txt @@ -8,7 +8,7 @@ git-interpret-trailers - help add structured information into commit messages SYNOPSIS -------- [verse] -'git interpret-trailers' [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] +'git interpret-trailers' [--in-place] [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] DESCRIPTION ----------- @@ -64,6 +64,9 @@ folding rules, the encoding rules and probably many other rules. OPTIONS ------- +--in-place:: + Edit the files in place. + --trim-empty:: If the <value> part of any trailer contains only whitespace, the whole trailer will be removed from the resulting message. @@ -216,6 +219,25 @@ Signed-off-by: Alice <alice@example.com> Signed-off-by: Bob <bob@example.com> ------------ +* Use the '--in-place' option to edit a message file in place: ++ +------------ +$ cat msg.txt +subject + +message + +Signed-off-by: Bob <bob@example.com> +$ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt +$ cat msg.txt +subject + +message + +Signed-off-by: Bob <bob@example.com> +Acked-by: Alice <alice@example.com> +------------ + * Extract the last commit as a patch, and add a 'Cc' and a 'Reviewed-by' trailer to it: + diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index e26f01fb1d..75c3f4157d 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -12,6 +12,7 @@ SYNOPSIS 'git ls-files' [-z] [-t] [-v] (--[cached|deleted|others|ignored|stage|unmerged|killed|modified])* (-[c|d|o|i|s|u|k|m])* + [--eol] [-x <pattern>|--exclude=<pattern>] [-X <file>|--exclude-from=<file>] [--exclude-per-directory=<file>] @@ -147,6 +148,24 @@ a space) at the start of each line: possible for manual inspection; the exact format may change at any time. +--eol:: + Show <eolinfo> and <eolattr> of files. + <eolinfo> is the file content identification used by Git when + the "text" attribute is "auto" (or not set and core.autocrlf is not false). + <eolinfo> is either "-text", "none", "lf", "crlf", "mixed" or "". ++ +"" means the file is not a regular file, it is not in the index or +not accessible in the working tree. ++ +<eolattr> is the attribute that is used when checking out or committing, +it is either "", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf". +Note: Currently Git does not support "text=auto eol=lf" or "text=auto eol=crlf", +that may change in the future. ++ +Both the <eolinfo> in the index ("i/<eolinfo>") +and in the working tree ("w/<eolinfo>") are shown for regular files, +followed by the ("attr/<eolattr>"). + \--:: Do not interpret any more arguments as options. @@ -161,6 +180,9 @@ which case it outputs: [<tag> ]<mode> <object> <stage> <file> +'git ls-files --eol' will show + i/<eolinfo><SPACES>w/<eolinfo><SPACES>attr/<eolattr><SPACE*><TAB><file> + 'git ls-files --unmerged' and 'git ls-files --stage' can be used to examine detailed information on unmerged paths. diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index d510c05e11..5f2628c8f8 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -9,8 +9,9 @@ git-ls-remote - List references in a remote repository SYNOPSIS -------- [verse] -'git ls-remote' [--heads] [--tags] [--upload-pack=<exec>] - [--exit-code] <repository> [<refs>...] +'git ls-remote' [--heads] [--tags] [--refs] [--upload-pack=<exec>] + [-q | --quiet] [--exit-code] [--get-url] + [--symref] [<repository> [<refs>...]] DESCRIPTION ----------- @@ -29,6 +30,13 @@ OPTIONS both, references stored in refs/heads and refs/tags are displayed. +--refs:: + Do not show peeled tags or pseudorefs like HEAD in the output. + +-q:: +--quiet:: + Do not print remote URL to stderr. + --upload-pack=<exec>:: Specify the full path of 'git-upload-pack' on the remote host. This allows listing references from repositories accessed via @@ -46,6 +54,12 @@ OPTIONS "url.<base>.insteadOf" config setting (See linkgit:git-config[1]) and exit without talking to the remote. +--symref:: + In addition to the object pointed by it, show the underlying + ref pointed by it when showing a symbolic ref. Currently, + upload-pack only shows the symref HEAD, so it will be the only + one shown by ls-remote. + <repository>:: The "remote" repository to query. This parameter can be either a URL or the name of a remote (see the GIT URLS and diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index b3e768ee81..35e3170918 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -510,6 +510,43 @@ git-p4.useClientSpec:: option '--use-client-spec'. See the "CLIENT SPEC" section above. This variable is a boolean, not the name of a p4 client. +git-p4.pathEncoding:: + Perforce keeps the encoding of a path as given by the originating OS. + Git expects paths encoded as UTF-8. Use this config to tell git-p4 + what encoding Perforce had used for the paths. This encoding is used + to transcode the paths to UTF-8. As an example, Perforce on Windows + often uses "cp1252" to encode path names. + +git-p4.largeFileSystem:: + Specify the system that is used for large (binary) files. Please note + that large file systems do not support the 'git p4 submit' command. + Only Git LFS is implemented right now (see https://git-lfs.github.com/ + for more information). Download and install the Git LFS command line + extension to use this option and configure it like this: ++ +------------- +git config git-p4.largeFileSystem GitLFS +------------- + +git-p4.largeFileExtensions:: + All files matching a file extension in the list will be processed + by the large file system. Do not prefix the extensions with '.'. + +git-p4.largeFileThreshold:: + All files with an uncompressed size exceeding the threshold will be + processed by the large file system. By default the threshold is + defined in bytes. Add the suffix k, m, or g to change the unit. + +git-p4.largeFileCompressedThreshold:: + All files with a compressed size exceeding the threshold will be + processed by the large file system. This option might slow down + your clone/sync process. By default the threshold is defined in + bytes. Add the suffix k, m, or g to change the unit. + +git-p4.largeFilePush:: + Boolean variable which defines if large files are automatically + pushed to a server. + git-p4.keepEmptyCommits:: A changelist that contains only excluded files will be imported as an empty commit if this boolean option is set to true. diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 93c72a29ce..a62a2a615d 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -101,7 +101,7 @@ Options related to merging include::merge-options.txt[] -r:: ---rebase[=false|true|preserve]:: +--rebase[=false|true|preserve|interactive]:: When true, rebase the current branch on top of the upstream branch after fetching. If there is a remote-tracking branch corresponding to the upstream branch and the upstream branch @@ -113,6 +113,8 @@ to `git rebase` so that locally created merge commits will not be flattened. + When false, merge the current branch into the upstream branch. + +When `interactive`, enable the interactive mode of rebase. ++ See `pull.rebase`, `branch.<name>.rebase` and `branch.autoSetupRebase` in linkgit:git-config[1] if you want to make `git pull` always use `--rebase` instead of merging. diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 85a4d7d6d5..cf6ee4a4df 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [--follow-tags] [--atomic] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] + [--repo=<repository>] [-f | --force] [-d | --delete] [--prune] [-v | --verbose] [-u | --set-upstream] [--[no-]signed|--sign=(true|false|if-asked)] [--force-with-lease[=<refname>[:<expect>]]] @@ -37,6 +37,13 @@ the default `<refspec>` by consulting `remote.*.push` configuration, and if it is not found, honors `push.default` configuration to decide what to push (See linkgit:git-config[1] for the meaning of `push.default`). +When neither the command-line nor the configuration specify what to +push, the default behavior is used, which corresponds to the `simple` +value for `push.default`: the current branch is pushed to the +corresponding upstream branch, but as a safety measure, the push is +aborted if the upstream branch does not have the same name as the +local one. + OPTIONS[[OPTIONS]] ------------------ @@ -257,22 +264,33 @@ origin +master` to force a push to the `master` branch). See the is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. ---recurse-submodules=check|on-demand:: - Make sure all submodule commits used by the revisions to be - pushed are available on a remote-tracking branch. If 'check' is - used Git will verify that all submodule commits that changed in - the revisions to be pushed are available on at least one remote - of the submodule. If any commits are missing the push will be - aborted and exit with non-zero status. If 'on-demand' is used - all submodules that changed in the revisions to be pushed will - be pushed. If on-demand was not able to push all necessary - revisions it will also be aborted and exit with non-zero status. +--no-recurse-submodules:: +--recurse-submodules=check|on-demand|no:: + May be used to make sure all submodule commits used by the + revisions to be pushed are available on a remote-tracking branch. + If 'check' is used Git will verify that all submodule commits that + changed in the revisions to be pushed are available on at least one + remote of the submodule. If any commits are missing the push will + be aborted and exit with non-zero status. If 'on-demand' is used + all submodules that changed in the revisions to be pushed will be + pushed. If on-demand was not able to push all necessary revisions + it will also be aborted and exit with non-zero status. A value of + 'no' or using '--no-recurse-submodules' can be used to override the + push.recurseSubmodules configuration variable when no submodule + recursion is required. --[no-]verify:: Toggle the pre-push hook (see linkgit:githooks[5]). The default is --verify, giving the hook a chance to prevent the push. With --no-verify, the hook is bypassed completely. +-4:: +--ipv4:: + Use IPv4 addresses only, ignoring IPv6 addresses. + +-6:: +--ipv6:: + Use IPv6 addresses only, ignoring IPv4 addresses. include::urls-remotes.txt[] diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index d64388cb8e..ff633b0db7 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -10,6 +10,7 @@ SYNOPSIS -------- [verse] 'git quiltimport' [--dry-run | -n] [--author <author>] [--patches <dir>] + [--series <file>] DESCRIPTION @@ -42,13 +43,19 @@ OPTIONS information can be found in the patch description. --patches <dir>:: - The directory to find the quilt patches and the - quilt series file. + The directory to find the quilt patches. + The default for the patch directory is patches or the value of the $QUILT_PATCHES environment variable. +--series <file>:: + The quilt series file. ++ +The default for the series file is <patches>/series +or the value of the $QUILT_SERIES environment +variable. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 6cca8bb51d..6ed610a031 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -3,7 +3,7 @@ git-rebase(1) NAME ---- -git-rebase - Forward-port local commits to the updated upstream head +git-rebase - Reapply commits on top of another base tip SYNOPSIS -------- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 8bd22aff87..1d7eceaa93 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -15,6 +15,7 @@ SYNOPSIS 'git remote remove' <name> 'git remote set-head' <name> (-a | --auto | -d | --delete | <branch>) 'git remote set-branches' [--add] <name> <branch>... +'git remote get-url' [--push] [--all] <name> 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> 'git remote set-url --delete' [--push] <name> <url> @@ -131,6 +132,15 @@ The named branches will be interpreted as if specified with the With `--add`, instead of replacing the list of currently tracked branches, adds to that list. +'get-url':: + +Retrieves the URLs for a remote. Configurations for `insteadOf` and +`pushInsteadOf` are expanded here. By default, only the first URL is listed. ++ +With '--push', push URLs are queried rather than fetch URLs. ++ +With '--all', all URLs for the remote will be listed. + 'set-url':: Changes URLs for the remote. Sets first URL for remote <name> that matches diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 0e0bd363d6..af230d0647 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -133,7 +133,7 @@ By default, the command passes `--delta-base-offset` option to 'git pack-objects'; this typically results in slightly smaller packs, but the generated packs are incompatible with versions of Git older than version 1.4.4. If you need to share your repository with such ancient Git -versions, either directly or via the dumb http or rsync protocol, then you +versions, either directly or via the dumb http protocol, then you need to set the configuration variable `repack.UseDeltaBaseOffset` to "false" and repack. Access from old Git versions over the native protocol is unaffected by this option as the conversion is performed on the fly diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 7b49c85347..ef22f1775b 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -45,7 +45,7 @@ SYNOPSIS [ --regexp-ignore-case | -i ] [ --extended-regexp | -E ] [ --fixed-strings | -F ] - [ --date=(local|relative|default|iso|iso-strict|rfc|short) ] + [ --date=<format>] [ [ --objects | --objects-edge | --objects-edge-aggressive ] [ --unpacked ] ] [ --pretty | --header ] diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b15139ffdc..573616a04a 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -89,6 +89,7 @@ effect to your index in a row. -s:: --signoff:: Add Signed-off-by line at the end of the commit message. + See the signoff option in linkgit:git-commit[1] for more information. --strategy=<strategy>:: Use the given merge strategy. Should only be used once. diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index b9134d234f..771a7b5b09 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -10,6 +10,7 @@ SYNOPSIS -------- [verse] 'git send-email' [options] <file|directory|rev-list options>... +'git send-email' --dump-aliases DESCRIPTION @@ -387,6 +388,16 @@ default to '--validate'. Send emails even if safety checks would prevent it. +Information +~~~~~~~~~~~ + +--dump-aliases:: + Instead of the normal operation, dump the shorthand alias names from + the configured alias file(s), one per line in alphabetical order. Note, + this only includes the alias name and not its expanded email addresses. + See 'sendemail.aliasesfile' for more information about aliases. + + CONFIGURATION ------------- diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 375213fe46..92df596e5f 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -95,6 +95,8 @@ show [<stash>]:: shows the latest one. By default, the command shows the diffstat, but it will accept any format known to 'git diff' (e.g., `git stash show -p stash@{1}` to view the second most recent stash in patch form). + You can use stash.showStat and/or stash.showPatch config variables + to change the default behavior. pop [--index] [-q|--quiet] [<stash>]:: diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 0c0f60b20e..fb23a98a17 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -1034,6 +1034,8 @@ listed below are allowed: url = http://server.org/svn fetch = trunk/project-a:refs/remotes/project-a/trunk branches = branches/*/project-a:refs/remotes/project-a/branches/* + branches = branches/release_*:refs/remotes/project-a/branches/release_* + branches = branches/re*se:refs/remotes/project-a/branches/* tags = tags/*/project-a:refs/remotes/project-a/tags/* ------------------------------------------------------------------------ @@ -1044,6 +1046,16 @@ independent path component (surrounded by '/' or EOL). This type of configuration is not automatically created by 'init' and should be manually entered with a text-editor or using 'git config'. +Also note that only one asterisk is allowed per word. For example: + + branches = branches/re*se:refs/remotes/project-a/branches/* + +will match branches 'release', 'rese', 're123se', however + + branches = branches/re*s*e:refs/remotes/project-a/branches/* + +will produce an error. + It is also possible to fetch a subset of branches or tags by using a comma-separated list of names within braces. For example: diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 08b4dfbf1b..abab4814ec 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -13,7 +13,8 @@ SYNOPSIS <tagname> [<commit> | <object>] 'git tag' -d <tagname>... 'git tag' [-n[<num>]] -l [--contains <commit>] [--points-at <object>] - [--column[=<options>] | --no-column] [--create-reflog] [<pattern>...] + [--column[=<options>] | --no-column] [--create-reflog] [--sort=<key>] + [--format=<format>] [--[no-]merged [<commit>]] [<pattern>...] 'git tag' -v <tagname>... DESCRIPTION @@ -94,14 +95,16 @@ OPTIONS using fnmatch(3)). Multiple patterns may be given; if any of them matches, the tag is shown. ---sort=<type>:: - Sort in a specific order. Supported type is "refname" - (lexicographic order), "version:refname" or "v:refname" (tag +--sort=<key>:: + Sort based on the key given. Prefix `-` to sort in + descending order of the value. You may use the --sort=<key> option + multiple times, in which case the last key becomes the primary + key. Also supports "version:refname" or "v:refname" (tag names are treated as versions). The "version:refname" sort order can also be affected by the - "versionsort.prereleaseSuffix" configuration variable. Prepend - "-" to reverse sort order. When this option is not given, the - sort order defaults to the value configured for the 'tag.sort' + "versionsort.prereleaseSuffix" configuration variable. + The keys supported are the same as those in `git for-each-ref`. + Sort order defaults to the value configured for the 'tag.sort' variable if it exists, or lexicographic order otherwise. See linkgit:git-config[1]. @@ -156,6 +159,16 @@ This option is only applicable when listing tags without annotation lines. The object that the new tag will refer to, usually a commit. Defaults to HEAD. +<format>:: + A string that interpolates `%(fieldname)` from the object + pointed at by a ref being shown. The format is the same as + that of linkgit:git-for-each-ref[1]. When unspecified, + defaults to `%(refname:strip=2)`. + +--[no-]merged [<commit>]:: + Only list tags whose tips are reachable, or not reachable + if '--no-merged' is used, from the specified commit ('HEAD' + if not specified). CONFIGURATION ------------- diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index f4e5a85351..c6cbed189c 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -18,7 +18,7 @@ SYNOPSIS [--[no-]skip-worktree] [--ignore-submodules] [--[no-]split-index] - [--[no-|force-]untracked-cache] + [--[no-|test-|force-]untracked-cache] [--really-refresh] [--unresolve] [--again | -g] [--info-only] [--index-info] [-z] [--stdin] [--index-version <n>] @@ -174,17 +174,30 @@ may not support it yet. --untracked-cache:: --no-untracked-cache:: - Enable or disable untracked cache extension. This could speed - up for commands that involve determining untracked files such - as `git status`. The underlying operating system and file - system must change `st_mtime` field of a directory if files - are added or deleted in that directory. + Enable or disable untracked cache feature. Please use + `--test-untracked-cache` before enabling it. ++ +These options take effect whatever the value of the `core.untrackedCache` +configuration variable (see linkgit:git-config[1]). But a warning is +emitted when the change goes against the configured value, as the +configured value will take effect next time the index is read and this +will remove the intended effect of the option. + +--test-untracked-cache:: + Only perform tests on the working directory to make sure + untracked cache can be used. You have to manually enable + untracked cache using `--untracked-cache` or + `--force-untracked-cache` or the `core.untrackedCache` + configuration variable afterwards if you really want to use + it. If a test fails the exit code is 1 and a message + explains what is not working as needed, otherwise the exit + code is 0 and OK is printed. --force-untracked-cache:: - For safety, `--untracked-cache` performs tests on the working - directory to make sure untracked cache can be used. These - tests can take a few seconds. `--force-untracked-cache` can be - used to skip the tests. + Same as `--untracked-cache`. Provided for backwards + compatibility with older versions of Git where + `--untracked-cache` used to imply `--test-untracked-cache` but + this option would enable the extension unconditionally. \--:: Do not interpret any more arguments as options. @@ -375,6 +388,37 @@ Although this bit looks similar to assume-unchanged bit, its goal is different from assume-unchanged bit's. Skip-worktree also takes precedence over assume-unchanged bit when both are set. +Untracked cache +--------------- + +This cache is meant to speed up commands that involve determining +untracked files such as `git status`. + +This feature works by recording the mtime of the working tree +directories and then omitting reading directories and stat calls +against files in those directories whose mtime hasn't changed. For +this to work the underlying operating system and file system must +change the `st_mtime` field of directories if files in the directory +are added, modified or deleted. + +You can test whether the filesystem supports that with the +`--test-untracked-cache` option. The `--untracked-cache` option used +to implicitly perform that test in older versions of Git, but that's +no longer the case. + +If you want to enable (or disable) this feature, it is easier to use +the `core.untrackedCache` configuration variable (see +linkgit:git-config[1]) than using the `--untracked-cache` option to +`git update-index` in each repository, especially if you want to do so +across all repositories you use, because you can set the configuration +variable to `true` (or `false`) in your `$HOME/.gitconfig` just once +and have it affect all repositories you touch. + +When the `core.untrackedCache` configuration variable is changed, the +untracked cache is added to or removed from the index the next time a +command reads the index; while when `--[no-|force-]untracked-cache` +are used, the untracked cache is immediately added to or removed from +the index. Configuration ------------- @@ -400,6 +444,9 @@ It can be useful when the inode change time is regularly modified by something outside Git (file system crawlers and backup systems use ctime for marking files processed) (see linkgit:git-config[1]). +The untracked cache extension can be enabled by the +`core.untrackedCache` configuration variable (see +linkgit:git-config[1]). SEE ALSO -------- diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index fb68156cf8..62c76c1c89 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -11,6 +11,7 @@ SYNOPSIS [verse] 'git worktree add' [-f] [--detach] [-b <new-branch>] <path> [<branch>] 'git worktree prune' [-n] [-v] [--expire <expire>] +'git worktree list' [--porcelain] DESCRIPTION ----------- @@ -31,11 +32,9 @@ The working tree's administrative files in the repository (see `git worktree prune` in the main or any linked working tree to clean up any stale administrative files. -If you move a linked working tree to another file system, or -within a file system that does not support hard links, you need to run -at least one git command inside the linked working tree -(e.g. `git status`) in order to update its administrative files in the -repository so that they do not get automatically pruned. +If you move a linked working tree, you need to manually update the +administrative files so that they do not get pruned automatically. See +section "DETAILS" for more information. If a linked working tree is stored on a portable device or network share which is not always mounted, you can prevent its administrative files from @@ -59,6 +58,13 @@ prune:: Prune working tree information in $GIT_DIR/worktrees. +list:: + +List details of each worktree. The main worktree is listed first, followed by +each of the linked worktrees. The output details include if the worktree is +bare, the revision currently checked out, and the branch currently checked out +(or 'detached HEAD' if none). + OPTIONS ------- @@ -86,6 +92,11 @@ OPTIONS With `prune`, do not remove anything; just report what it would remove. +--porcelain:: + With `list`, output in an easy-to-parse format for scripts. + This format will remain stable across Git versions and regardless of user + configuration. See below for details. + -v:: --verbose:: With `prune`, report all removals. @@ -124,6 +135,13 @@ thumb is do not make any assumption about whether a path belongs to $GIT_DIR or $GIT_COMMON_DIR when you need to directly access something inside $GIT_DIR. Use `git rev-parse --git-path` to get the final path. +If you move a linked working tree, you need to update the 'gitdir' file +in the entry's directory. For example, if a linked working tree is moved +to `/newpath/test-next` and its `.git` file points to +`/path/main/.git/worktrees/test-next`, then update +`/path/main/.git/worktrees/test-next/gitdir` to reference `/newpath/test-next` +instead. + To prevent a $GIT_DIR/worktrees entry from being pruned (which can be useful in some situations, such as when the entry's working tree is stored on a portable device), add a file named @@ -134,6 +152,41 @@ to `/path/main/.git/worktrees/test-next` then a file named `test-next` entry from being pruned. See linkgit:gitrepository-layout[5] for details. +LIST OUTPUT FORMAT +------------------ +The worktree list command has two output formats. The default format shows the +details on a single line with columns. For example: + +------------ +S git worktree list +/path/to/bare-source (bare) +/path/to/linked-worktree abcd1234 [master] +/path/to/other-linked-worktree 1234abc (detached HEAD) +------------ + +Porcelain Format +~~~~~~~~~~~~~~~~ +The porcelain format has a line per attribute. Attributes are listed with a +label and value separated by a single space. Boolean attributes (like 'bare' +and 'detached') are listed as a label only, and are only present if and only +if the value is true. An empty line indicates the end of a worktree. For +example: + +------------ +S git worktree list --porcelain +worktree /path/to/bare-source +bare + +worktree /path/to/linked-worktree +HEAD abcd1234abcd1234abcd1234abcd1234abcd1234 +branch refs/heads/master + +worktree /path/to/other-linked-worktree +HEAD 1234abc1234abc1234abc1234abc1234abc1234a +detached + +------------ + EXAMPLES -------- You are in the middle of a refactoring session and your boss comes in and @@ -167,7 +220,6 @@ performed manually, such as: - `remove` to remove a linked working tree and its administrative files (and warn if the working tree is dirty) - `mv` to move or rename a working tree and update its administrative files -- `list` to list linked working trees - `lock` to prevent automatic pruning of administrative files (for instance, for a working tree on a portable device) diff --git a/Documentation/git.txt b/Documentation/git.txt index ea256de13c..34ff007a98 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,6 +43,21 @@ unreleased) version of Git, that is available from the 'master' branch of the `git.git` repository. Documentation for older releases are available here: +* link:v2.8.2/git.html[documentation for release 2.8.2] + +* release notes for + link:RelNotes/2.8.2.txt[2.8.2]. + link:RelNotes/2.8.1.txt[2.8.1]. + link:RelNotes/2.8.0.txt[2.8]. + +* link:v2.7.3/git.html[documentation for release 2.7.3] + +* release notes for + link:RelNotes/2.7.3.txt[2.7.3], + link:RelNotes/2.7.2.txt[2.7.2], + link:RelNotes/2.7.1.txt[2.7.1], + link:RelNotes/2.7.0.txt[2.7]. + * link:v2.6.6/git.html[documentation for release 2.6.6] * release notes for @@ -1119,9 +1134,7 @@ of clones and fetches. connection (or proxy, if configured) - `ssh`: git over ssh (including `host:path` syntax, - `git+ssh://`, etc). - - - `rsync`: git over rsync + `ssh://`, etc). - `http`: git over http, both "smart http" and "dumb http". Note that this does _not_ include `https`; if you want both, diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 36e9ab3e16..15b3bfa8db 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -710,7 +710,7 @@ files). Again, this can all be simplified with ---------------- -$ git clone rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git +$ git clone git://git.kernel.org/pub/scm/git/git.git/ my-git $ cd my-git $ git checkout ---------------- @@ -1011,20 +1011,6 @@ $ git fetch <remote-repository> One of the following transports can be used to name the repository to download from: -Rsync:: - `rsync://remote.machine/path/to/repo.git/` -+ -Rsync transport is usable for both uploading and downloading, -but is completely unaware of what git does, and can produce -unexpected results when you download from the public repository -while the repository owner is uploading into it via `rsync` -transport. Most notably, it could update the files under -`refs/` which holds the object name of the topmost commits -before uploading the files in `objects/` -- the downloader would -obtain head commit object name while that object itself is still -not available in the repository. For this reason, it is -considered deprecated. - SSH:: `remote.machine:/path/to/repo.git/` or + @@ -1430,7 +1416,7 @@ while, depending on how active your project is. When a repository is synchronized via `git push` and `git pull` objects packed in the source repository are usually stored -unpacked in the destination, unless rsync transport is used. +unpacked in the destination. While this allows you to use different packing strategies on both ends, it also means you may need to repack both repositories every once in a while. diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 7ba0ac965d..a2f59b194c 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -397,7 +397,7 @@ preceding SP is also omitted. Currently, no commands pass any 'extra-info'. The hook always runs after the automatic note copying (see -"notes.rewrite.<command>" in linkgit:git-config.txt[1]) has happened, and +"notes.rewrite.<command>" in linkgit:git-config[1]) has happened, and thus has access to these notes. The following command-specific comments apply: diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index b00c67df46..b3b58d324e 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -451,7 +451,7 @@ perform clones and pulls using the ssh protocol: bob$ git clone alice.org:/home/alice/project myrepo ------------------------------------- -Alternatively, Git has a native protocol, or can use rsync or http; +Alternatively, Git has a native protocol, or can use http; see linkgit:git-pull[1] for details. Git can also be used in a CVS-like mode, with a central repository diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 8c6478b2f2..cafc284359 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -413,8 +413,9 @@ exclude;; [[def_per_worktree_ref]]per-worktree ref:: Refs that are per-<<def_working_tree,worktree>>, rather than - global. This is presently only <<def_HEAD,HEAD>>, but might - later include other unusual refs. + global. This is presently only <<def_HEAD,HEAD>> and any refs + that start with `refs/bisect/`, but might later include other + unusual refs. [[def_pseudoref]]pseudoref:: Pseudorefs are a class of files under `$GIT_DIR` which behave @@ -530,6 +531,11 @@ The most notable example is `HEAD`. "Secure Hash Algorithm 1"; a cryptographic hash function. In the context of Git used as a synonym for <<def_object_name,object name>>. +[[def_shallow_clone]]shallow clone:: + Mostly a synonym to <<def_shallow_repository,shallow repository>> + but the phrase makes it more explicit that it was created by + running `git clone --depth=...` command. + [[def_shallow_repository]]shallow repository:: A shallow <<def_repository,repository>> has an incomplete history some of whose <<def_commit,commits>> have <<def_parent,parents>> cauterized away (in other diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 7bbd19b300..2eb92b9327 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -81,9 +81,17 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. +no-renames;; + Turn off rename detection. + See also linkgit:git-diff[1] `--no-renames`. + +find-renames[=<n>];; + Turn on rename detection, optionally setting the similarity + threshold. This is the default. + See also linkgit:git-diff[1] `--find-renames`. + rename-threshold=<n>;; - Controls the similarity threshold used for rename detection. - See also linkgit:git-diff[1] `-M`. + Deprecated synonym for `find-renames=<n>`. subtree[=<path>];; This option is a more advanced form of 'subtree' strategy, where diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 4b659ac1a6..54b88b6dca 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -43,7 +43,7 @@ people using 80-column terminals. commit may be copied to the output. ifndef::git-rev-list[] ---notes[=<ref>]:: +--notes[=<treeish>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when @@ -54,8 +54,8 @@ By default, the notes shown are from the notes refs listed in the 'core.notesRef' and 'notes.displayRef' variables (or corresponding environment overrides). See linkgit:git-config[1] for more details. + -With an optional '<ref>' argument, show this notes ref instead of the -default notes ref(s). The ref specifies the full refname when it begins +With an optional '<treeish>' argument, use the treeish to find the notes +to display. The treeish can specify the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. + @@ -71,7 +71,7 @@ being displayed. Examples: "--notes=foo" will show only notes from "--notes --notes=foo --no-notes --notes=bar" will only show notes from "refs/notes/bar". ---show-notes[=<ref>]:: +--show-notes[=<treeish>]:: --[no-]standard-notes:: These options are deprecated. Use the above --notes/--no-notes options instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index f1c52208f0..4f009d4424 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -701,15 +701,19 @@ include::pretty-options.txt[] --relative-date:: Synonym for `--date=relative`. ---date=(relative|local|default|iso|iso-strict|rfc|short|raw):: +--date=<format>:: Only takes effect for dates shown in human-readable format, such as when using `--pretty`. `log.date` config variable sets a default - value for the log command's `--date` option. + value for the log command's `--date` option. By default, dates + are shown in the original time zone (either committer's or + author's). If `-local` is appended to the format (e.g., + `iso-local`), the user's local time zone is used instead. + `--date=relative` shows dates relative to the current time, -e.g. ``2 hours ago''. +e.g. ``2 hours ago''. The `-local` option cannot be used with +`--raw` or `--relative`. + -`--date=local` shows timestamps in user's local time zone. +`--date=local` is an alias for `--date=default-local`. + `--date=iso` (or `--date=iso8601`) shows timestamps in a ISO 8601-like format. The differences to the strict ISO 8601 format are: @@ -732,10 +736,15 @@ format, often found in email messages. `--date=format:...` feeds the format `...` to your system `strftime`. Use `--date=format:%c` to show the date in your system locale's preferred format. See the `strftime` manual for a complete list of -format placeholders. +format placeholders. When using `-local`, the correct syntax is +`--date=format-local:...`. + -`--date=default` shows timestamps in the original time zone -(either committer's or author's). +`--date=default` is the default format, and is similar to +`--date=rfc2822`, with a few exceptions: + + - there is no comma after the day-of-week + + - the time zone is omitted when the local time zone is used ifdef::git-rev-list[] --header:: diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index d85e303364..19314e3b7f 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -61,11 +61,11 @@ some output processing may assume ref names in UTF-8. '@':: '@' alone is a shortcut for 'HEAD'. -'<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: +'<refname>@{<date>}', e.g. 'master@\{yesterday\}', 'HEAD@{5 minutes ago}':: A ref followed by the suffix '@' with a date specification enclosed in a brace - pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') specifies the value + pair (e.g. '\{yesterday\}', '{1 month 2 weeks 3 days 1 hour 1 + second ago}' or '{1979-02-26 18:30:00}') specifies the value of the ref at a prior point in time. This suffix may only be used immediately following a ref name and the ref must have an existing log ('$GIT_DIR/logs/<ref>'). Note that this looks up the state @@ -73,7 +73,7 @@ some output processing may assume ref names in UTF-8. 'master' branch last week. If you want to look at commits made during certain times, see '--since' and '--until'. -'<refname>@\{<n>\}', e.g. 'master@\{1\}':: +'<refname>@{<n>}', e.g. 'master@\{1\}':: A ref followed by the suffix '@' with an ordinal specification enclosed in a brace pair (e.g. '\{1\}', '\{15\}') specifies the n-th prior value of that ref. For example 'master@\{1\}' @@ -82,13 +82,13 @@ some output processing may assume ref names in UTF-8. immediately following a ref name and the ref must have an existing log ('$GIT_DIR/logs/<refname>'). -'@\{<n>\}', e.g. '@\{1\}':: +'@{<n>}', e.g. '@\{1\}':: You can use the '@' construct with an empty ref part to get at a reflog entry of the current branch. For example, if you are on branch 'blabla' then '@\{1\}' means the same as 'blabla@\{1\}'. -'@\{-<n>\}', e.g. '@\{-1\}':: - The construct '@\{-<n>\}' means the <n>th branch/commit checked out +'@{-<n>}', e.g. '@{-1}':: + The construct '@{-<n>}' means the <n>th branch/commit checked out before the current one. '<branchname>@\{upstream\}', e.g. 'master@\{upstream\}', '@\{u\}':: @@ -139,7 +139,7 @@ from one location and push to another. In a non-triangular workflow, '<rev>{caret}1{caret}1{caret}1'. See below for an illustration of the usage of this form. -'<rev>{caret}\{<type>\}', e.g. 'v0.99.8{caret}\{commit\}':: +'<rev>{caret}{<type>}', e.g. 'v0.99.8{caret}\{commit\}':: A suffix '{caret}' followed by an object type name enclosed in brace pair means dereference the object at '<rev>' recursively until an object of type '<type>' is found or the object cannot be @@ -159,13 +159,13 @@ it does not have to be dereferenced even once to get to an object. 'rev{caret}\{tag\}' can be used to ensure that 'rev' identifies an existing tag object. -'<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: +'<rev>{caret}{}', e.g. 'v0.99.8{caret}{}':: A suffix '{caret}' followed by an empty brace pair means the object could be a tag, and dereference the tag recursively until a non-tag object is found. -'<rev>{caret}\{/<text>\}', e.g. 'HEAD^{/fix nasty bug}':: +'<rev>{caret}{/<text>}', e.g. 'HEAD^{/fix nasty bug}':: A suffix '{caret}' to a revision parameter, followed by a brace pair that contains a text led by a slash, is the same as the ':/fix nasty bug' syntax below except that @@ -176,11 +176,12 @@ existing tag object. A colon, followed by a slash, followed by a text, names a commit whose commit message matches the specified regular expression. This name returns the youngest matching commit which is - reachable from any ref. If the commit message starts with a - '!' you have to repeat that; the special sequence ':/!', - followed by something else than '!', is reserved for now. - The regular expression can match any part of the commit message. To - match messages starting with a string, one can use e.g. ':/^foo'. + reachable from any ref. The regular expression can match any part of the + commit message. To match messages starting with a string, one can use + e.g. ':/^foo'. The special sequence ':/!' is reserved for modifiers to what + is matched. ':/!-foo' performs a negative match, while ':/!!foo' matches a + literal '!' character, followed by 'foo'. Any other sequence beginning with + ':/!' is reserved for now. '<rev>:<path>', e.g. 'HEAD:README', ':README', 'master:./README':: A suffix ':' followed by a path names the blob or tree diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt index 8076172a08..cfc063018c 100644 --- a/Documentation/technical/api-argv-array.txt +++ b/Documentation/technical/api-argv-array.txt @@ -56,3 +56,10 @@ Functions `argv_array_clear`:: Free all memory associated with the array and return it to the initial, empty state. + +`argv_array_detach`:: + Disconnect the `argv` member from the `argv_array` struct and + return it. The caller is responsible for freeing the memory used + by the array, and by the strings it references. After detaching, + the `argv_array` is in a reinitialized state and can be pushed + into again. diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt index 0d8b99b368..20741f345e 100644 --- a/Documentation/technical/api-config.txt +++ b/Documentation/technical/api-config.txt @@ -63,13 +63,6 @@ parse for configuration, rather than looking in the usual files. Regular Specify whether include directives should be followed in parsed files. Regular `git_config` defaults to `1`. -There is a special version of `git_config` called `git_config_early`. -This version takes an additional parameter to specify the repository -config, instead of having it looked up via `git_path`. This is useful -early in a Git program before the repository has been found. Unless -you're working with early setup code, you probably don't want to use -this. - Reading Specific Files ---------------------- diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 5f0757dcc9..695bd4bf43 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -231,6 +231,13 @@ There are some macros to easily define options: pass the command-line option, which can be specified multiple times, to another command. +`OPT_CMDMODE(short, long, &int_var, description, enum_val)`:: + Define an "operation mode" option, only one of which in the same + group of "operating mode" options that share the same `int_var` + can be given by the user. `enum_val` is set to `int_var` when the + option is used, but an error is reported if other "operating mode" + option has already set its value to the same `int_var`. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-remote.txt b/Documentation/technical/api-remote.txt index 2cfdd224a8..f10941b2e8 100644 --- a/Documentation/technical/api-remote.txt +++ b/Documentation/technical/api-remote.txt @@ -51,6 +51,10 @@ struct remote The proxy to use for curl (http, https, ftp, etc.) URLs. +`http_proxy_authmethod`:: + + The method used for authenticating against `http_proxy`. + struct remotes can be found by name with remote_get(), and iterated through with for_each_remote(). remote_get(NULL) will return the default remote, given the current branch and configuration. diff --git a/Documentation/technical/api-trace.txt b/Documentation/technical/api-trace.txt index 097a651d96..fadb5979c4 100644 --- a/Documentation/technical/api-trace.txt +++ b/Documentation/technical/api-trace.txt @@ -28,7 +28,7 @@ static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); static void trace_print_foo(const char *message) { - trace_print_key(&trace_foo, message); + trace_printf_key(&trace_foo, "%s", message); } ------------ + @@ -95,3 +95,46 @@ for (;;) { } trace_performance(t, "frotz"); ------------ + +Bugs & Caveats +-------------- + +GIT_TRACE_* environment variables can be used to tell Git to show +trace output to its standard error stream. Git can often spawn a pager +internally to run its subcommand and send its standard output and +standard error to it. + +Because GIT_TRACE_PERFORMANCE trace is generated only at the very end +of the program with atexit(), which happens after the pager exits, it +would not work well if you send its log to the standard error output +and let Git spawn the pager at the same time. + +As a work around, you can for example use '--no-pager', or set +GIT_TRACE_PERFORMANCE to another file descriptor which is redirected +to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its +absolute path. + +For example instead of the following command which by default may not +print any performance information: + +------------ +GIT_TRACE_PERFORMANCE=2 git log -1 +------------ + +you may want to use: + +------------ +GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 +------------ diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 9ccb24677e..b05da95788 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -7,9 +7,8 @@ Depending on the transport protocol, some of this information may be absent. Git supports ssh, git, http, and https protocols (in addition, ftp, -and ftps can be used for fetching and rsync can be used for fetching -and pushing, but these are inefficient and deprecated; do not use -them). +and ftps can be used for fetching, but this is inefficient and +deprecated; do not use it). The native transport (i.e. git:// URL) does no authentication and should be used with caution on unsecured networks. @@ -20,7 +19,6 @@ The following syntaxes may be used with them: - git://host.xz{startsb}:port{endsb}/path/to/repo.git/ - http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ - ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- rsync://host.xz/path/to/repo.git/ An alternative scp-like syntax may also be used with the ssh protocol: diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 1c790ac74a..5e07454572 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2125,8 +2125,37 @@ Allowing web browsing of a repository ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The gitweb cgi script provides users an easy way to browse your -project's files and history without having to install Git; see the file -gitweb/INSTALL in the Git source tree for instructions on setting it up. +project's revisions, file contents and logs without having to install +Git. Features like RSS/Atom feeds and blame/annotation details may +optionally be enabled. + +The linkgit:git-instaweb[1] command provides a simple way to start +browsing the repository using gitweb. The default server when using +instaweb is lighttpd. + +See the file gitweb/INSTALL in the Git source tree and +linkgit:gitweb[1] for instructions on details setting up a permanent +installation with a CGI or Perl capable server. + +[[how-to-get-a-git-repository-with-minimal-history]] +How to get a Git repository with minimal history +------------------------------------------------ + +A <<def_shallow_clone,shallow clone>>, with its truncated +history, is useful when one is interested only in recent history +of a project and getting full history from the upstream is +expensive. + +A <<def_shallow_clone,shallow clone>> is created by specifying +the linkgit:git-clone[1] `--depth` switch. The depth can later be +changed with the linkgit:git-fetch[1] `--depth` switch, or full +history restored with `--unshallow`. + +Merging inside a <<def_shallow_clone,shallow clone>> will work as long +as a merge base is in the recent history. +Otherwise, it will be like merging unrelated histories and may +have to result in huge conflicts. This limitation may make such +a repository unsuitable to be used in merge based workflows. [[sharing-development-examples]] Examples @@ -4636,23 +4665,15 @@ Scan email archives for other stuff left out Scan man pages to see if any assume more background than this manual provides. -Simplify beginning by suggesting disconnected head instead of -temporary branch creation? - Add more good examples. Entire sections of just cookbook examples might be a good idea; maybe make an "advanced examples" section a standard end-of-chapter section? Include cross-references to the glossary, where appropriate. -Document shallow clones? See draft 1.5.0 release notes for some -documentation. - Add a section on working with other version control systems, including CVS, Subversion, and just imports of series of release tarballs. -More details on gitweb? - Write a chapter on using plumbing and writing scripts. Alternates, clone -reference, etc. |