diff options
Diffstat (limited to 'Documentation')
43 files changed, 463 insertions, 178 deletions
diff --git a/Documentation/RelNotes-1.6.6.2.txt b/Documentation/RelNotes-1.6.6.2.txt new file mode 100644 index 0000000000..4eaddc0106 --- /dev/null +++ b/Documentation/RelNotes-1.6.6.2.txt @@ -0,0 +1,46 @@ +Git v1.6.6.2 Release Notes +========================== + +Fixes since v1.6.6.1 +-------------------- + + * recursive merge didn't correctly diagnose its own programming errors, + and instead caused the caller to segfault. + + * The new "smart http" aware clients probed the web servers to see if + they support smart http, but did not fall back to dumb http transport + correctly with some servers. + + * Time based reflog syntax e.g. "@{yesterday}" didn't diagnose a misspelled + time specification and instead assumed "@{now}". + + * "git archive HEAD -- no-such-directory" produced an empty archive + without complaining. + + * "git blame -L start,end -- file" misbehaved when given a start that is + larger than the number of lines in the file. + + * "git checkout -m" didn't correctly call custom merge backend supplied + by the end user. + + * "git config -f <file>" misbehaved when run from a subdirectory. + + * "git cvsserver" didn't like having regex metacharacters (e.g. '+') in + CVSROOT environment. + + * "git fast-import" did not correctly handle large blobs that may + bust the pack size limit. + + * "git gui" is supposed to work even when launched from inside a .git + directory. + + * "git gui" misbehaved when applying a hunk that ends with deletion. + + * "git imap-send" did not honor imap.preformattedHTML as documented. + + * "git log" family incorrectly showed the commit notes unconditionally by + mistake, which was especially irritating when running "git log --oneline". + + * "git status" shouldn't require an write access to the repository. + +Other minor documentation updates are included. diff --git a/Documentation/RelNotes-1.7.0.1.txt b/Documentation/RelNotes-1.7.0.1.txt new file mode 100644 index 0000000000..8ff5bcada8 --- /dev/null +++ b/Documentation/RelNotes-1.7.0.1.txt @@ -0,0 +1,35 @@ +Git v1.7.0.1 Release Notes +========================== + +Fixes since v1.7.0 +------------------ + + * In a freshly created repository "rev-parse HEAD^0" complained that + it is dangling symref, even though "rev-parse HEAD" didn't. + + * "git show :no-such-name" tried to access the index without bounds + check, leading to a potential segfault. + + * Message from "git cherry-pick" was harder to read and use than necessary + when it stopped due to conflicting changes. + + * We referred to ".git/refs/" throughout the documentation when we + meant to talk about abstract notion of "ref namespace". Because + people's repositories often have packed refs these days, this was + confusing. + + * "git diff --output=/path/that/cannot/be/written" did not correctly + error out. + + * "git grep -e -pattern-that-begin-with-dash paths..." could not be + spelled as "git grep -- -pattern-that-begin-with-dash paths..." which + would be a GNU way to use "--" as "end of options". + + * "git grep" compiled with threading support tried to access an + uninitialized mutex on boxes with a single CPU. + + * "git stash pop -q --index" failed because the unnecessary --index + option was propagated to "git stash drop" that is internally run at the + end. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.0.txt b/Documentation/RelNotes-1.7.0.txt index 098e38bc94..43e3f33615 100644 --- a/Documentation/RelNotes-1.7.0.txt +++ b/Documentation/RelNotes-1.7.0.txt @@ -4,7 +4,7 @@ Git v1.7.0 Release Notes Notes on behaviour change ------------------------- - * "git push" into a branch that is currently checked out (i.e. pointed by + * "git push" into a branch that is currently checked out (i.e. pointed at by HEAD in a repository that is not bare) is refused by default. Similarly, "git push $there :$killed" to delete the branch $killed @@ -19,18 +19,18 @@ Notes on behaviour change patch series with more than two messages. All messages will be sent as a reply to the first message, i.e. cover letter. - It has been possible to configure send-email to send "shallow thread" + It has been possible already to configure send-email to send "shallow thread" by setting sendemail.chainreplyto configuration variable to false. The only thing this release does is to change the default when you haven't configured that variable. * "git status" is not "git commit --dry-run" anymore. This change does - not affect you if you run the command without pathspec. + not affect you if you run the command without argument. * "git diff" traditionally treated various "ignore whitespace" options only as a way to filter the patch output. "git diff --exit-code -b" exited with non-zero status even if all changes were about changing the - ammount of whitespace and nothing else. and "git diff -b" showed the + amount of whitespace and nothing else; and "git diff -b" showed the "diff --git" header line for such a change without patch text. In this release, the "ignore whitespaces" options affect the semantics @@ -38,6 +38,19 @@ Notes on behaviour change whitespaces is reported with zero exit status when run with --exit-code, and there is no "diff --git" header for such a change. + * External diff and textconv helpers are now executed using the shell. + This makes them consistent with other programs executed by git, and + allows you to pass command-line parameters to the helpers. Any helper + paths containing spaces or other metacharacters now need to be + shell-quoted. The affected helpers are GIT_EXTERNAL_DIFF in the + environment, and diff.*.command and diff.*.textconv in the config + file. + + * The --max-pack-size argument to 'git repack', 'git pack-objects', and + 'git fast-import' was assuming the provided size to be expressed in MiB, + unlike the corresponding config variable and other similar options accepting + a size value. It is now expecting a size expressed in bytes, with a possible + unit suffix of 'k', 'm', or 'g'. Updates since v1.6.6 -------------------- @@ -48,6 +61,12 @@ Updates since v1.6.6 mismatch between fast-import and the frontends that produce the input stream. + * "git svn" support of subversion "merge tickets" and miscellaneous fixes. + + * "gitk" and "git gui" translation updates. + + * "gitweb" updates (code clean-up, load checking etc.) + (portability) * Some more MSVC portability patches for msysgit port. @@ -87,7 +106,9 @@ Updates since v1.6.6 defaults to the current branch, so "git fetch && git merge @{upstream}" will be equivalent to "git pull". - * "git branch --set-upstream" can be used to update the (surprise!) upstream + * "git am --resolved" has a synonym "git am --continue". + + * "git branch --set-upstream" can be used to update the (surprise!) upstream, i.e. where the branch is supposed to pull and merge from (or rebase onto). * "git checkout A...B" is a way to detach HEAD at the merge base between @@ -113,10 +134,10 @@ Updates since v1.6.6 * "git fetch --all" can now be used in place of "git remote update". - * "git grep" does not rely on external grep anymore. + * "git grep" does not rely on external grep anymore. It can use more than + one thread to accelerate the operation. - * "git grep" learned "--no-index" option, to search inside contents that - are not managed by git. + * "git grep" learned "--quiet" option. * "git log" and friends learned "--glob=heads/*" syntax that is a more flexible way to complement "--branches/--tags/--remotes". @@ -140,13 +161,13 @@ Updates since v1.6.6 * "git rebase --onto A...B" means the history is replayed on top of the merge base between A and B. - * "git rebase -i" learned new action "fixup", that squashes the change + * "git rebase -i" learned new action "fixup" that squashes the change but does not affect existing log message. - * "git rebase -i" also learned --autosquash option, that is useful + * "git rebase -i" also learned --autosquash option that is useful together with the new "fixup" action. - * "git remote" learned set-url subcommand, to update (surprise!) url + * "git remote" learned set-url subcommand that updates (surprise!) url for an existing remote nickname. * "git rerere" learned "forget path" subcommand. Together with "git @@ -168,6 +189,9 @@ Updates since v1.6.6 * Many more commands are now built-in. + * THREADED_DELTA_SEARCH is no more. If you build with threads, delta + compression will always take advantage of it. + Fixes since v1.6.6 ------------------ @@ -178,14 +202,13 @@ release, unless otherwise noted. the branch is fully merged to its upstream branch if it is not merged to the current branch. It now deletes it in such a case. - * When "git diff" is asked to compare the work tree with something, - it used to consider that a checked-out submodule with uncommitted - changes is not modified; this could cause people to forget committing - these changes in the submodule before committing in the superproject. - It now considers such a change as a modification. - --- -exec >/var/tmp/1 -O=v1.6.6.1-434-g3521c1b -echo O=$(git describe master) -git shortlog --no-merges $O..master ^maint + * "fiter-branch" command incorrectly said --prune-empty and --filter-commit + were incompatible; the latter should be read as --commit-filter. + + * When using "git status" or asking "git diff" to compare the work tree + with something, they used to consider that a checked-out submodule with + uncommitted changes is not modified; this could cause people to forget + committing these changes in the submodule before committing in the + superproject. They now consider such a change as a modification and + "git diff" will append a "-dirty" to the work tree side when generating + patch output or when used with the --submodule option. diff --git a/Documentation/RelNotes-1.7.1.txt b/Documentation/RelNotes-1.7.1.txt new file mode 100644 index 0000000000..8c18ca5d22 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.txt @@ -0,0 +1,20 @@ +Git v1.7.1 Release Notes +======================== + +Updates since v1.7.0 +-------------------- + + * "git grep" learned "--no-index" option, to search inside contents that + are not managed by git. + +Fixes since v1.7.0 +------------------ + +All of the fixes in v1.7.0.X maintenance series are included in this +release, unless otherwise noted. + +--- +exec >/var/tmp/1 +echo O=$(git describe) +O=v1.7.0-36-gfaa3b47 +git shortlog --no-merges ^maint $O.. diff --git a/Documentation/config.txt b/Documentation/config.txt index 17901e244a..7103172ed3 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -138,6 +138,11 @@ advice.*:: Advice on how to set your identity configuration when your information is guessed from the system username and domain name. Default: true. + + detachedHead:: + Advice shown when you used linkgit::git-checkout[1] to + move to the detach HEAD state, to instruct how to create + a local branch after the fact. Default: true. -- core.fileMode:: @@ -417,6 +422,20 @@ You probably do not need to adjust this value. + Common unit suffixes of 'k', 'm', or 'g' are supported. +core.bigFileThreshold:: + Files larger than this size are stored deflated, without + attempting delta compression. Storing large files without + delta compression avoids excessive memory usage, at the + slight expense of increased disk usage. ++ +Default is 512 MiB on all platforms. This should be reasonable +for most projects as source code and other text files can still +be delta compressed, but larger binary media files won't be. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. ++ +Currently only linkgit:git-fast-import[1] honors this setting. + core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns @@ -666,9 +685,7 @@ color.grep:: color.grep.match:: Use customized color for matches. The value of this variable - may be specified as in color.branch.<slot>. It is passed using - the environment variables 'GREP_COLOR' and 'GREP_COLORS' when - calling an external 'grep'. + may be specified as in color.branch.<slot>. color.interactive:: When set to `always`, always use colors for interactive prompts @@ -1354,10 +1371,13 @@ you can use linkgit:git-index-pack[1] on the *.pack file to regenerate the `{asterisk}.idx` file. pack.packSizeLimit:: - The default maximum size of a pack. This setting only affects - packing to a file, i.e. the git:// protocol is unaffected. It - can be overridden by the `\--max-pack-size` option of - linkgit:git-repack[1]. + The maximum size of a pack. This setting only affects + packing to a file when repacking, i.e. the git:// protocol + is unaffected. It can be overridden by the `\--max-pack-size` + option of linkgit:git-repack[1]. The minimum size allowed is + limited to 1 MiB. The default is unlimited. + Common unit suffixes of 'k', 'm', or 'g' are + supported. pager.<cmd>:: Allows turning on or off pagination of the output of a diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index b71712473e..15c7e794f4 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -19,7 +19,7 @@ git-diff-tree [-r] <tree-ish-1> <tree-ish-2> [<pattern>...]:: git-diff-files [<pattern>...]:: compares the index and the files on the filesystem. -The "git-diff-tree" command begins its ouput by printing the hash of +The "git-diff-tree" command begins its output by printing the hash of what is being compared. After that, all the commands print one output line per changed file. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 8707d0e740..60e922e6ef 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -117,12 +117,14 @@ any of those replacements occurred. option and lists the commits in that commit range like the 'summary' option of linkgit:git-submodule[1] does. ---color:: +--color[=<when>]:: Show colored diff. + The value must be always (the default), never, or auto. --no-color:: Turn off colored diff, even when the configuration file gives the default to color output. + Same as `--color=never`. --color-words[=<regex>]:: Show colored word diff, i.e., color words which have changed. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index f74fcf3737..51cbeb7032 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -153,7 +153,7 @@ EXAMPLES and its subdirectories: + ------------ -$ git add Documentation/\\*.txt +$ git add Documentation/\*.txt ------------ + Note that the asterisk `\*` is quoted from the shell in this diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index c3e4f12c44..c66c565bbe 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -15,7 +15,7 @@ SYNOPSIS [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] [--reject] [-q | --quiet] [--scissors | --no-scissors] [<mbox> | <Maildir>...] -'git am' (--skip | --resolved | --abort) +'git am' (--continue | --skip | --abort) DESCRIPTION ----------- @@ -107,6 +107,7 @@ default. You can use `--no-utf8` to override this. Skip the current patch. This is only meaningful when restarting an aborted patch. +--continue:: -r:: --resolved:: After a patch failure (e.g. attempting to apply diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index 799c8b64bd..8d3e66626f 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -112,6 +112,14 @@ export-subst:: expand several placeholders when adding this file to an archive. See linkgit:gitattributes[5] for details. +Note that attributes are by default taken from the `.gitattributes` files +in the tree that is being archived. If you want to tweak the way the +output is generated after the fact (e.g. you committed without adding an +appropriate export-ignore in its `.gitattributes`), adjust the checked out +`.gitattributes` file as necessary and use `--work-tree-attributes` +option. Alternatively you can keep necessary attributes that should apply +while archiving any tree in your `$GIT_DIR/info/attributes` file. + EXAMPLES -------- git archive --format=tar --prefix=junk/ HEAD | (cd /var/tmp/ && tar xf -):: diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index 6b7b2e5497..86b3015c13 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -799,7 +799,7 @@ fixed in the "main" branch by commit "F"? The result of such a bisection would be that we would find that H is the first bad commit, when in fact it's B. So that would be wrong! -And yes it's can happen in practice that people working on one branch +And yes it can happen in practice that people working on one branch are not aware that people working on another branch fixed a bug! It could also happen that F fixed more than one bug or that it is a revert of some big development effort that was not ready to be diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 6b6c3da2d9..903a690f10 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -8,7 +8,7 @@ git-branch - List, create, or delete branches SYNOPSIS -------- [verse] -'git branch' [--color | --no-color] [-r | -a] +'git branch' [--color[=<when>] | --no-color] [-r | -a] [-v [--abbrev=<length> | --no-abbrev]] [(--merged | --no-merged | --contains) [<commit>]] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] @@ -84,12 +84,14 @@ OPTIONS -M:: Move/rename a branch even if the new branch name already exists. ---color:: +--color[=<when>]:: Color branches to highlight current, local, and remote branches. + The value must be always (the default), never, or auto. --no-color:: Turn off branch colors, even when the configuration file gives the default to color output. + Same as `--color=never`. -r:: List or delete (if used with -d) the remote-tracking branches. diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index d9a3326f58..379eee6734 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -19,8 +19,9 @@ status if it is not. A reference is used in git to specify branches and tags. A branch head is stored under the `$GIT_DIR/refs/heads` directory, and -a tag is stored under the `$GIT_DIR/refs/tags` directory. git -imposes the following rules on how references are named: +a tag is stored under the `$GIT_DIR/refs/tags` directory (or, if refs +are packed by `git gc`, as entries in the `$GIT_DIR/packed-refs` file). +git imposes the following rules on how references are named: . They can include slash `/` for hierarchical (directory) grouping, but no slash-separated component can begin with a @@ -43,7 +44,7 @@ imposes the following rules on how references are named: . They cannot contain a sequence `@{`. -- They cannot contain a `\\`. +. They cannot contain a `\`. These rules make it easy for shell script based tools to parse reference names, pathname expansion by the shell when a reference name is used diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 335c885bb7..a81cb6c280 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -33,8 +33,8 @@ OPTIONS -f:: --force:: - If the git configuration specifies clean.requireForce as true, - 'git clean' will refuse to run unless given -f or -n. + If the git configuration variable clean.requireForce is not set + to false, 'git clean' will refuse to run unless given -f or -n. -n:: --dry-run:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index f43c8b2c08..88ea6246a1 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -29,7 +29,7 @@ arguments will in addition merge the remote master branch into the current master branch, if any. This default configuration is achieved by creating references to -the remote branch heads under `$GIT_DIR/refs/remotes/origin` and +the remote branch heads under `refs/remotes/origin` and by initializing `remote.origin.url` and `remote.origin.fetch` configuration variables. diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index e99bb14754..64fb458b45 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -197,13 +197,13 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) Show untracked files (Default: 'all'). + The mode parameter is optional, and is used to specify -the handling of untracked files. The possible options are: +the handling of untracked files. ++ +The possible options are: + --- - 'no' - Show no untracked files - 'normal' - Shows untracked files and directories - 'all' - Also shows individual files in untracked directories. --- + See linkgit:git-config[1] for configuration variable used to change the default for when the option is not diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index ddfcb3d143..8bcd875a67 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -13,7 +13,7 @@ SYNOPSIS [-A <author-conv-file>] [-p <options-for-cvsps>] [-P <file>] [-C <git_repository>] [-z <fuzz>] [-i] [-k] [-u] [-s <subst>] [-a] [-m] [-M <regex>] [-S <regex>] [-L <commitlimit>] - [-r <remote>] [<CVS_module>] + [-r <remote>] [-R] [<CVS_module>] DESCRIPTION @@ -157,6 +157,22 @@ It is not recommended to use this feature if you intend to export changes back to CVS again later with 'git cvsexportcommit'. +-R:: + Generate a `$GIT_DIR/cvs-revisions` file containing a mapping from CVS + revision numbers to newly-created Git commit IDs. The generated file + will contain one line for each (filename, revision) pair imported; + each line will look like ++ +--------- +src/widget.c 1.1 1d862f173cdc7325b6fa6d2ae1cfd61fd1b512b7 +--------- ++ +The revision data is appended to the file if it already exists, for use when +doing incremental imports. ++ +This option may be useful if you have CVS revision numbers stored in commit +messages, bug-tracking systems, email archives, and the like. + -h:: Print a short usage message and exit. diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index c24e14b870..98ec6b5871 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -37,7 +37,7 @@ unsigned, with 'verbatim', they will be silently exported and with 'warn', they will be exported, but you will see a warning. --tag-of-filtered-object=(abort|drop|rewrite):: - Specify how to handle tags whose tagged objectis filtered out. + Specify how to handle tags whose tagged object is filtered out. Since revisions and files to export can be limited by path, tagged objects may be filtered completely. + diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index ff4022c15f..19082b04eb 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -44,11 +44,14 @@ OPTIONS not contain the old commit). --max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. - The default is 4096 (4 GiB) as that is the maximum allowed - packfile size (due to file format limitations). Some - importers may wish to lower this, such as to ensure the - resulting packfiles fit on CDs. + Maximum size of each output packfile. + The default is unlimited. + +--big-file-threshold=<n>:: + Maximum size of a blob that fast-import will attempt to + create a delta for, expressed in bytes. The default is 512m + (512 MiB). Some importers may wish to lower this on systems + with constrained memory. --depth=<n>:: Maximum delta depth, for blob and tree deltification. @@ -152,7 +155,7 @@ fast-forward update, fast-import will skip updating that ref and instead prints a warning message. fast-import will always attempt to update all branch refs, and does not stop on the first failure. -Branch updates can be forced with \--force, but its recommended that +Branch updates can be forced with \--force, but it's recommended that this only be used on an otherwise quiet repository. Using \--force is not necessary for an initial import into an empty repository. @@ -267,7 +270,7 @@ is always copied into the identity string at the time it is being created by fast-import. There is no way to specify a different time or timezone. + -This particular format is supplied as its short to implement and +This particular format is supplied as it's short to implement and may be useful to a process that wants to create a new commit right now, without needing to use a working directory or 'git update-index'. @@ -420,7 +423,7 @@ quoting or escaping syntax is supported within `<committish>`. Here `<committish>` is any of the following: * The name of an existing branch already in fast-import's internal branch - table. If fast-import doesn't know the name, its treated as a SHA-1 + table. If fast-import doesn't know the name, it's treated as a SHA-1 expression. * A mark reference, `:<idnum>`, where `<idnum>` is the mark number. @@ -759,7 +762,7 @@ assigned mark. The mark command is optional here as some frontends have chosen to generate the Git SHA-1 for the blob on their own, and feed that -directly to `commit`. This is typically more work than its worth +directly to `commit`. This is typically more work than it's worth however, as marks are inexpensive to store and easy to use. `data` diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index e9952e8210..4a8487c154 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -18,7 +18,7 @@ higher level wrapper of this command, instead. Invokes 'git-upload-pack' on a possibly remote repository and asks it to send objects missing from this repository, to update the named heads. The list of commits available locally -is found out by scanning local $GIT_DIR/refs/ and sent to +is found out by scanning the local refs/ hierarchy and sent to 'git-upload-pack' running on the other end. This command degenerates to download everything to complete the @@ -44,8 +44,8 @@ OPTIONS locked against repacking. --thin:: - Spend extra cycles to minimize the number of objects to be sent. - Use it on slower connection. + Fetch a "thin" pack, which records objects in deltified form based + on objects not included in the pack to reduce network traffic. --include-tag:: If the remote side supports it, annotated tags objects will diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index cfaba2a305..020028cf9a 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -358,7 +358,7 @@ To move the whole tree into a subdirectory, or remove it from there: --------------------------------------------------------------- git filter-branch --index-filter \ - 'git ls-files -s | sed "s-\t-&newsubdir/-" | + 'git ls-files -s | sed "s-\t\"*-&newsubdir/-" | GIT_INDEX_FILE=$GIT_INDEX_FILE.new \ git update-index --index-info && mv $GIT_INDEX_FILE.new $GIT_INDEX_FILE' HEAD diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index abb6735a40..6305f6d82a 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -16,18 +16,18 @@ SYNOPSIS [-F | --fixed-strings] [-n] [-l | --files-with-matches] [-L | --files-without-match] [-z | --null] - [-c | --count] [--all-match] + [-c | --count] [--all-match] [-q | --quiet] [--max-depth <depth>] - [--color | --no-color] + [--color[=<when>] | --no-color] [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] [<tree>...] - [--] [<path>...] + [--] [<pathspec>...] DESCRIPTION ----------- -Look for specified patterns in the working tree files, blobs -registered in the index file, or given tree objects. +Look for specified patterns in the tracked files in the work tree, blobs +registered in the index file, or blobs in given tree objects. OPTIONS @@ -49,7 +49,7 @@ OPTIONS Don't match the pattern in binary files. --max-depth <depth>:: - For each pathspec given on command line, descend at most <depth> + For each <pathspec> given on command line, descend at most <depth> levels of directories. A negative value means no limit. -w:: @@ -111,12 +111,14 @@ OPTIONS Instead of showing every matched line, show the number of lines that match. ---color:: +--color[=<when>]:: Show colored matches. + The value must be always (the default), never, or auto. --no-color:: Turn off match highlighting, even when the configuration file gives the default to color output. + Same as `--color=never`. -[ABC] <context>:: Show `context` trailing (`A` -- after), or leading (`B` @@ -158,17 +160,29 @@ OPTIONS this flag is specified to limit the match to files that have lines to match all of them. +-q:: +--quiet:: + Do not output matched lines; instead, exit with status 0 when + there is a match and with non-zero status when there isn't. + `<tree>...`:: Search blobs in the trees for specified patterns. \--:: Signals the end of options; the rest of the parameters - are <path> limiters. + are <pathspec> limiters. +<pathspec>...:: + If given, limit the search to paths matching at least one pattern. + Both leading paths match and glob(7) patterns are supported. Example ------- +git grep 'time_t' -- '*.[ch]':: + Looks for `time_t` in all tracked .c and .h files in the working + directory and its subdirectories. + git grep -e \'#define\' --and \( -e MAX_PATH -e PATH_MAX \):: Looks for a line that has `#define` and either `MAX_PATH` or `PATH_MAX`. diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 07931c6874..5238820657 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -14,7 +14,7 @@ DESCRIPTION ----------- A simple CGI program to serve the contents of a Git repository to Git clients accessing the repository over http:// and https:// protocols. -The program supports clients fetching using both the smart HTTP protcol +The program supports clients fetching using both the smart HTTP protocol and the backwards-compatible dumb HTTP protocol, as well as clients pushing using the smart HTTP protocol. diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index 57db955bd4..6cafbe2ec1 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -71,6 +71,10 @@ imap.preformattedHTML:: option causes Thunderbird to send the patch as a plain/text, format=fixed email. Default is `false`. +imap.authMethod:: + Specify authenticate method for authentication with IMAP server. + Current supported method is 'CRAM-MD5' only. + Examples ~~~~~~~~ diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 65a301bece..f3ccc72f0d 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -46,14 +46,10 @@ OPTIONS 'git repack'. --fix-thin:: - It is possible for 'git pack-objects' to build - "thin" pack, which records objects in deltified form based on - objects not included in the pack to reduce network traffic. - Those objects are expected to be present on the receiving end - and they must be included in the pack for that pack to be self - contained and indexable. Without this option any attempt to - index a thin pack will fail. This option only makes sense in - conjunction with --stdin. + Fix a "thin" pack produced by `git pack-objects --thin` (see + linkgit:git-pack-objects[1] for details) by adding the + excluded objects the deltified objects are based on to the + pack. This option only makes sense in conjunction with --stdin. --keep:: Before moving the index into its final destination diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 097a14773b..034caedc39 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -21,16 +21,21 @@ DESCRIPTION Reads list of objects from the standard input, and writes a packed archive with specified base-name, or to the standard output. -A packed archive is an efficient way to transfer set of objects -between two repositories, and also is an archival format which -is efficient to access. The packed archive format (.pack) is -designed to be self contained so that it can be unpacked without -any further information, but for fast, random access to the objects -in the pack, a pack index file (.idx) will be generated. - -Placing both in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or +A packed archive is an efficient way to transfer a set of objects +between two repositories as well as an access efficient archival +format. In a packed archive, an object is either stored as a +compressed whole or as a difference from some other object. +The latter is often called a delta. + +The packed archive format (.pack) is designed to be self-contained +so that it can be unpacked without any further information. Therefore, +each object that a delta depends upon must be present within the pack. + +A pack index file (.idx) is generated for fast, random access to the +objects in the pack. Placing both the index file (.idx) and the packed +archive (.pack) in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or any of the directories on $GIT_ALTERNATE_OBJECT_DIRECTORIES) -enables git to read from such an archive. +enables git to read from the pack archive. The 'git unpack-objects' command can read the packed archive and expand the objects contained in the pack into "one-file @@ -38,10 +43,6 @@ one-object" format; this is typically done by the smart-pull commands when a pack is created on-the-fly for efficient network transport by their peers. -In a packed archive, an object is either stored as a compressed -whole, or as a difference from some other object. The latter is -often called a delta. - OPTIONS ------- @@ -73,7 +74,7 @@ base-name:: --all:: This implies `--revs`. In addition to the list of revision arguments read from the standard input, pretend - as if all refs under `$GIT_DIR/refs` are specified to be + as if all refs under `refs/` are specified to be included. --include-tag:: @@ -105,8 +106,9 @@ base-name:: `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. +--max-pack-size=[N]:: + Maximum size of each output pack file. The size can be suffixed with + "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. The default is unlimited, unless the config variable `pack.packSizeLimit` is set. @@ -178,6 +180,16 @@ base-name:: Add --no-reuse-object if you want to force a uniform compression level on all data no matter the source. +--thin:: + Create a "thin" pack by omitting the common objects between a + sender and a receiver in order to reduce network transfer. This + option only makes sense in conjunction with --stdout. ++ +Note: A thin pack violates the packed archive format by omitting +required objects and is thus unusable by git without making it +self-contained. Use `git index-pack --fix-thin` +(see linkgit:git-index-pack[1]) to restore the self-contained property. + --delta-base-offset:: A packed archive can express base object of a delta as either 20-byte object name or as an offset in the diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index 3bb7304517..15cfb7a8dc 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -17,7 +17,7 @@ NOTE: In most cases, users should run 'git gc', which calls 'git prune'. See the section "NOTES", below. This runs 'git fsck --unreachable' using all the refs -available in `$GIT_DIR/refs`, optionally with additional set of +available in `refs/`, optionally with additional set of objects specified on the command line, and prunes all unpacked objects unreachable from any of these head objects from the object database. In addition, it diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 73a921ca0f..49b6bd9d92 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -69,11 +69,11 @@ nor in any Push line of the corresponding remotes file---see below). --all:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` be pushed. + refs under `refs/heads/` be pushed. --mirror:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/` (which includes but is not + refs under `refs/` (which includes but is not limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs @@ -96,7 +96,7 @@ nor in any Push line of the corresponding remotes file---see below). the same as prefixing all refs with a colon. --tags:: - All refs under `$GIT_DIR/refs/tags` are pushed, in + All refs under `refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. @@ -141,9 +141,10 @@ useful if you write an alias or script around 'git push'. --thin:: --no-thin:: - These options are passed to 'git send-pack'. Thin - transfer spends extra cycles to minimize the number of - objects to be sent and meant to be used on slower connection. + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. -v:: --verbose:: @@ -176,12 +177,17 @@ If --porcelain is used, then each line of the output is of the form: <flag> \t <from>:<to> \t <summary> (<reason>) ------------------------------- +The status of up-to-date refs is shown only if --porcelain or --verbose +option is used. + flag:: - A single character indicating the status of the ref. This is - blank for a successfully pushed ref, `!` for a ref that was - rejected or failed to push, and '=' for a ref that was up to - date and did not need pushing (note that the status of up to - date refs is shown only when `git push` is running verbosely). + A single character indicating the status of the ref: +(space);; for a successfully pushed fast-forward; +`{plus}`;; for a successful forced update; +`-`;; for a successfully deleted ref; +`*`;; for a successfully pushed new ref; +`!`;; for a ref that was rejected or failed to push; and +`=`;; for a ref that was up to date and did not need pushing. summary:: For a successfully pushed ref, the summary shows the old and new diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 4685a898f1..1b5f61aa0b 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -25,7 +25,7 @@ Commands are given by the caller on the helper's standard input, one per line. 'capabilities':: Lists the capabilities of the helper, one per line, ending - with a blank line. Each capability may be preceeded with '*'. + with a blank line. Each capability may be preceded with '*'. This marks them mandatory for git version using the remote helper to understand (unknown mandatory capability is fatal error). diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 538895c50c..8c67d1724f 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -98,24 +98,26 @@ other objects in that pack they already have locally. `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=<n>:: - Maximum size of each output packfile, expressed in MiB. +--max-pack-size=[N]:: + Maximum size of each output pack file. The size can be suffixed with + "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. - The default is unlimited. + The default is unlimited, unless the config variable + `pack.packSizeLimit` is set. Configuration ------------- -When configuration variable `repack.UseDeltaBaseOffset` is set -for the repository, the command passes `--delta-base-offset` -option to 'git pack-objects'; this typically results in slightly -smaller packs, but the generated packs are incompatible with -versions of git older than (and including) v1.4.3; do not set -the variable in a repository that older version of git needs to -be able to read (this includes repositories from which packs can -be copied out over http or rsync, and people who obtained packs -that way can try to use older git with it). +By default, the command passes `--delta-base-offset` option to +'git pack-objects'; this typically results in slightly smaller packs, +but the generated packs are incompatible with versions of Git older than +version 1.4.4. If you need to share your repository with such ancient Git +versions, either directly or via the dumb http or rsync protocol, then you +need to set the configuration variable `repack.UseDeltaBaseOffset` to +"false" and repack. Access from old Git versions over the native protocol +is unaffected by this option as the conversion is performed on the fly +as needed in that case. Author diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index e7845d4055..1a613aa108 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -33,7 +33,7 @@ OPTIONS --stop-at-non-option:: Only meaningful in `--parseopt` mode. Lets the option parser stop at the first non-option argument. This can be used to parse sub-commands - that take options themself. + that take options themselves. --sq-quote:: Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE @@ -101,15 +101,14 @@ OPTIONS abbreviation mode. --all:: - Show all refs found in `$GIT_DIR/refs`. + Show all refs found in `refs/`. --branches[=pattern]:: --tags[=pattern]:: --remotes[=pattern]:: Show all branches, tags, or remote-tracking branches, - respectively (i.e., refs found in `$GIT_DIR/refs/heads`, - `$GIT_DIR/refs/tags`, or `$GIT_DIR/refs/remotes`, - respectively). + respectively (i.e., refs found in `refs/heads`, + `refs/tags`, or `refs/remotes`, respectively). + If a `pattern` is given, only refs matching the given shell glob are shown. If the pattern does not contain a globbing character (`?`, @@ -189,7 +188,7 @@ blobs contained in a commit. `g`, and an abbreviated object name. * A symbolic ref name. E.g. 'master' typically means the commit - object referenced by $GIT_DIR/refs/heads/master. If you + object referenced by refs/heads/master. If you happen to have both heads/master and tags/master, you can explicitly say 'heads/master' to tell git which one you mean. When ambiguous, a `<name>` is disambiguated by taking the @@ -198,15 +197,15 @@ blobs contained in a commit. . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); - . otherwise, `$GIT_DIR/refs/<name>` if exists; + . otherwise, `refs/<name>` if exists; - . otherwise, `$GIT_DIR/refs/tags/<name>` if exists; + . otherwise, `refs/tags/<name>` if exists; - . otherwise, `$GIT_DIR/refs/heads/<name>` if exists; + . otherwise, `refs/heads/<name>` if exists; - . otherwise, `$GIT_DIR/refs/remotes/<name>` if exists; + . otherwise, `refs/remotes/<name>` if exists; - . otherwise, `$GIT_DIR/refs/remotes/<name>/HEAD` if exists. + . otherwise, `refs/remotes/<name>/HEAD` if exists. + HEAD names the commit your changes in the working tree is based on. FETCH_HEAD records the branch you fetched from a remote repository @@ -217,6 +216,9 @@ you can change the tip of the branch back to the state before you ran them easily. MERGE_HEAD records the commit(s) you are merging into your branch when you run 'git merge'. ++ +Note that any of the `refs/*` cases above may come either from +the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. * A ref followed by the suffix '@' with a date specification enclosed in a brace @@ -244,7 +246,7 @@ when you run 'git merge'. * The special construct '@\{-<n>\}' means the <n>th branch checked out before the current one. -* The suffix '@{upstream}' to a ref (short form 'ref@{u}') refers to +* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to the branch the ref is set to build on top of. Missing ref defaults to the current branch. diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 8178d92642..deaa7d9654 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -48,8 +48,8 @@ OPTIONS Run verbosely. --thin:: - Spend extra cycles to minimize the number of objects to be sent. - Use it on slower connection. + Send a "thin" pack, which records objects in deltified form based + on objects not included in the pack to reduce network traffic. <host>:: A remote host to house the repository. When this diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 734336119c..f1499bba88 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git show-branch' [-a|--all] [-r|--remotes] [--topo-order | --date-order] - [--current] [--color | --no-color] [--sparse] + [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]... @@ -20,8 +20,8 @@ DESCRIPTION ----------- Shows the commit ancestry graph starting from the commits named -with <rev>s or <globs>s (or all refs under $GIT_DIR/refs/heads -and/or $GIT_DIR/refs/tags) semi-visually. +with <rev>s or <globs>s (or all refs under refs/heads +and/or refs/tags) semi-visually. It cannot show more than 29 branches and commits at a time. @@ -37,8 +37,8 @@ OPTIONS <glob>:: A glob pattern that matches branch or tag names under - $GIT_DIR/refs. For example, if you have many topic - branches under $GIT_DIR/refs/heads/topic, giving + refs/. For example, if you have many topic + branches under refs/heads/topic, giving `topic/*` would show all of them. -r:: @@ -117,13 +117,15 @@ OPTIONS When no explicit <ref> parameter is given, it defaults to the current branch (or `HEAD` if it is detached). ---color:: +--color[=<when>]:: Color the status sign (one of these: `*` `!` `+` `-`) of each commit corresponding to the branch it's in. + The value must be always (the default), never, or auto. --no-color:: Turn off colored output, even when the configuration file gives the default to color output. + Same as `--color=never`. Note that --more, --list, --independent and --merge-base options are mutually exclusive. @@ -176,7 +178,7 @@ EXAMPLE ------- If you keep your primary branches immediately under -`$GIT_DIR/refs/heads`, and topic branches in subdirectories of +`refs/heads`, and topic branches in subdirectories of it, having the following in the configuration file may help: ------------ diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 84e555d81d..473889a660 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -33,7 +33,7 @@ A stash is by default listed as "WIP on 'branchname' ...", but you can give a more descriptive message on the command line when you create one. -The latest stash you created is stored in `$GIT_DIR/refs/stash`; older +The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using the usual reflog syntax (e.g. `stash@\{0}` is the most recently created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 63aa694968..2502531a3d 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -218,7 +218,7 @@ OPTIONS This option is only valid for the update command. Rebase the current branch onto the commit recorded in the superproject. If this option is given, the submodule's HEAD will not - be detached. If a a merge failure prevents this process, you will have + be detached. If a merge failure prevents this process, you will have to resolve these failures with linkgit:git-rebase[1]. If the key `submodule.$name.update` is set to `rebase`, this option is implicit. diff --git a/Documentation/git.txt b/Documentation/git.txt index 8c5f5b05cb..cc32ce18d2 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,9 +43,16 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.6.6.1/git.html[documentation for release 1.6.6.1] +* link:v1.7.0.1/git.html[documentation for release 1.7.0.1] * release notes for + link:RelNotes-1.7.0.1.txt[1.7.0.1], + link:RelNotes-1.7.0.txt[1.7.0]. + +* link:v1.6.6.2/git.html[documentation for release 1.6.6.2] + +* release notes for + link:RelNotes-1.6.6.2.txt[1.6.6.2], link:RelNotes-1.6.6.1.txt[1.6.6.1], link:RelNotes-1.6.6.txt[1.6.6]. diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index b396a871b3..d892e642ed 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -511,7 +511,8 @@ command to run to merge ancestor's version (`%O`), current version (`%A`) and the other branches' version (`%B`). These three tokens are replaced with the names of temporary files that hold the contents of these versions when the command line is -built. +built. Additionally, %L will be replaced with the conflict marker +size (see below). The merge driver is expected to leave the result of the merge in the file named with `%A` by overwriting it, and exit with zero diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 3ef71179d9..81c0e6f184 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -225,43 +225,43 @@ endif::git-rev-list[] --all:: - Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the + Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. --branches[=pattern]:: - Pretend as if all the refs in `$GIT_DIR/refs/heads` are listed + Pretend as if all the refs in `refs/heads` are listed on the command line as '<commit>'. If `pattern` is given, limit branches to ones matching given shell glob. If pattern lacks '?', - '*', or '[', '/*' at the end is impiled. + '*', or '[', '/*' at the end is implied. --tags[=pattern]:: - Pretend as if all the refs in `$GIT_DIR/refs/tags` are listed + Pretend as if all the refs in `refs/tags` are listed on the command line as '<commit>'. If `pattern` is given, limit tags to ones matching given shell glob. If pattern lacks '?', '*', - or '[', '/*' at the end is impiled. + or '[', '/*' at the end is implied. --remotes[=pattern]:: - Pretend as if all the refs in `$GIT_DIR/refs/remotes` are listed + Pretend as if all the refs in `refs/remotes` are listed on the command line as '<commit>'. If `pattern`is given, limit remote tracking branches to ones matching given shell glob. - If pattern lacks '?', '*', or '[', '/*' at the end is impiled. + If pattern lacks '?', '*', or '[', '/*' at the end is implied. --glob=glob-pattern:: Pretend as if all the refs matching shell glob `glob-pattern` are listed on the command line as '<commit>'. Leading 'refs/', is automatically prepended if missing. If pattern lacks '?', '*', - or '[', '/*' at the end is impiled. + or '[', '/*' at the end is implied. ifndef::git-rev-list[] --bisect:: - Pretend as if the bad bisection ref `$GIT_DIR/refs/bisect/bad` + Pretend as if the bad bisection ref `refs/bisect/bad` was listed and as if it was followed by `--not` and the good - bisection refs `$GIT_DIR/refs/bisect/good-*` on the command + bisection refs `refs/bisect/good-*` on the command line. endif::git-rev-list[] @@ -561,10 +561,10 @@ Bisection Helpers Limit output to the one commit object which is roughly halfway between included and excluded commits. Note that the bad bisection ref -`$GIT_DIR/refs/bisect/bad` is added to the included commits (if it -exists) and the good bisection refs `$GIT_DIR/refs/bisect/good-*` are +`refs/bisect/bad` is added to the included commits (if it +exists) and the good bisection refs `refs/bisect/good-*` are added to the excluded commits (if they exist). Thus, supposing there -are no refs in `$GIT_DIR/refs/bisect/`, if +are no refs in `refs/bisect/`, if ----------------------------------------------------------------------- $ git rev-list --bisect foo ^bar ^baz @@ -585,7 +585,7 @@ one. --bisect-vars:: This calculates the same as `--bisect`, except that refs in -`$GIT_DIR/refs/bisect/` are not used, and except that this outputs +`refs/bisect/` are not used, and except that this outputs text ready to be eval'ed by the shell. These lines will assign the name of the midpoint revision to the variable `bisect_rev`, and the expected number of commits to be tested after `bisect_rev` is tested @@ -599,7 +599,7 @@ number of commits to be tested if `bisect_rev` turns out to be bad to This outputs all the commit objects between the included and excluded commits, ordered by their distance to the included and excluded -commits. Refs in `$GIT_DIR/refs/bisect/` are not used. The farthest +commits. Refs in `refs/bisect/` are not used. The farthest from them is displayed first. (This is the only one displayed by `--bisect`.) + diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 50f9e9ac17..312e3b2e2b 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -115,6 +115,9 @@ There are some macros to easily define options: `OPT__ABBREV(&int_var)`:: Add `\--abbrev[=<n>]`. +`OPT__COLOR(&int_var, description)`:: + Add `\--color[=<when>]` and `--no-color`. + `OPT__DRY_RUN(&int_var)`:: Add `-n, \--dry-run`. @@ -183,6 +186,15 @@ There are some macros to easily define options: arguments. Short options that happen to be digits take precedence over it. +`OPT_COLOR_FLAG(short, long, &int_var, description)`:: + Introduce an option that takes an optional argument that can + have one of three values: "always", "never", or "auto". If the + argument is not given, it defaults to "always". The `--no-` form + works like `--long=never`; it cannot take an argument. If + "always", set `int_var` to 1; if "never", set `int_var` to 0; if + "auto", set `int_var` to 1 if stdout is a tty or a pager, + 0 otherwise. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt index b26c28133c..44876fa703 100644 --- a/Documentation/technical/api-run-command.txt +++ b/Documentation/technical/api-run-command.txt @@ -51,7 +51,7 @@ The functions above do the following: ENOENT; a diagnostic is printed only if .silent_exec_failure is 0. . Otherwise, the program is run. If it terminates regularly, its exit - code is returned. No diagnistic is printed, even if the exit code is + code is returned. No diagnostic is printed, even if the exit code is non-zero. . If the program terminated due to a signal, then the return value is the @@ -64,8 +64,8 @@ The functions above do the following: `start_async`:: Run a function asynchronously. Takes a pointer to a `struct - async` that specifies the details and returns a pipe FD - from which the caller reads. See below for details. + async` that specifies the details and returns a set of pipe FDs + for communication with the function. See below for details. `finish_async`:: @@ -135,7 +135,7 @@ stderr as follows: .in: The FD must be readable; it becomes child's stdin. .out: The FD must be writable; it becomes child's stdout. - .err > 0 is not supported. + .err: The FD must be writable; it becomes child's stderr. The specified FD is closed by start_command(), even if it fails to run the sub-process! @@ -180,17 +180,47 @@ The caller: struct async variable; 2. initializes .proc and .data; 3. calls start_async(); -4. processes the data by reading from the fd in .out; -5. closes .out; +4. processes communicates with proc through .in and .out; +5. closes .in and .out; 6. calls finish_async(). +The members .in, .out are used to provide a set of fd's for +communication between the caller and the callee as follows: + +. Specify 0 to have no file descriptor passed. The callee will + receive -1 in the corresponding argument. + +. Specify < 0 to have a pipe allocated; start_async() replaces + with the pipe FD in the following way: + + .in: Returns the writable pipe end into which the caller + writes; the readable end of the pipe becomes the function's + in argument. + + .out: Returns the readable pipe end from which the caller + reads; the writable end of the pipe becomes the function's + out argument. + + The caller of start_async() must close the returned FDs after it + has completed reading from/writing from them. + +. Specify a file descriptor > 0 to be used by the function: + + .in: The FD must be readable; it becomes the function's in. + .out: The FD must be writable; it becomes the function's out. + + The specified FD is closed by start_async(), even if it fails to + run the function. + The function pointer in .proc has the following signature: - int proc(int fd, void *data); + int proc(int in, int out, void *data); -. fd specifies a writable file descriptor to which the function must - write the data that it produces. The function *must* close this - descriptor before it returns. +. in, out specifies a set of file descriptors to which the function + must read/write the data that it needs/produces. The function + *must* close these descriptors before it returns. A descriptor + may be -1 if the caller did not configure a descriptor for that + direction. . data is the value that the caller has specified in the .data member of struct async. @@ -205,8 +235,8 @@ because this facility is implemented by a pipe to a forked process on UNIX, but by a thread in the same address space on Windows: . It cannot change the program's state (global variables, environment, - etc.) in a way that the caller notices; in other words, .out is the - only communication channel to the caller. + etc.) in a way that the caller notices; in other words, .in and .out + are the only communication channels to the caller. . It must not change the program's state that the caller of the facility also uses. diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 7950eeeda4..9a5cdafa9c 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -149,7 +149,7 @@ advertisement list at all, but other refs may still appear. The stream MUST include capability declarations behind a NUL on the first ref. The peeled value of a ref (that is "ref^{}") MUST be immediately after the ref itself, if presented. A conforming server -MUST peel the ref if its an annotated tag. +MUST peel the ref if it's an annotated tag. ---- advertised-refs = (no-refs / list-of-refs) @@ -261,7 +261,7 @@ Without either multi_ack or multi_ack_detailed: * upload-pack sends "NAK" on a flush-pkt if no common object has been found yet. If one has been found, and thus an ACK - was already sent, its silent on the flush-pkt. + was already sent, it's silent on the flush-pkt. After the client has gotten enough ACK responses that it can determine that the server has enough information to send an efficient packfile @@ -271,9 +271,9 @@ as common with the server, or the --date-order queue is empty), or the client determines that it wants to give up (in the canonical implementation, this is determined when the client sends 256 'have' lines without getting any of them ACKed by the server - meaning there is nothing in common and -the server should just send all it's objects), then the client will send +the server should just send all of its objects), then the client will send a 'done' command. The 'done' command signals to the server that the client -is ready to receive it's packfile data. +is ready to receive its packfile data. However, the 256 limit *only* turns on in the canonical client implementation if we have received at least one "ACK %s continue" @@ -286,7 +286,7 @@ ACK after 'done' if there is at least one common base and multi_ack or multi_ack_detailed is enabled. The server always sends NAK after 'done' if there is no common base found. -Then the server will start sending it's packfile data. +Then the server will start sending its packfile data. ---- server-response = *ack_multi ack / nak diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index 1892d3eeac..fd1a593149 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -60,7 +60,7 @@ doesn't, as in the following diagram: If the client wants x,y and starts out by saying have F,S, the server doesn't know what F,S is. Eventually the client says "have d" and the server sends "ACK d continue" to let the client know to stop -walking down that line (so don't send c-b-a), but its not done yet, +walking down that line (so don't send c-b-a), but it's not done yet, it needs a base for x. The client keeps going with S-R-Q, until a gets reached, at which point the server has a clear base and it all ends. @@ -181,7 +181,7 @@ delete-refs ----------- If the server sends back the 'delete-refs' capability, it means that -it is capable of accepting an zero-id value as the target +it is capable of accepting a zero-id value as the target value of a reference update. It is not sent back by the client, it simply informs the client that it can be sent zero-id values to delete references. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index b169836684..fe6fb722da 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1196,7 +1196,7 @@ the time, you will want to commit your changes before you can merge, and if you don't, then linkgit:git-stash[1] can take these changes away while you're doing the merge, and reapply them afterwards. -If the changes are independant enough, Git will automatically complete +If the changes are independent enough, Git will automatically complete the merge and commit the result (or reuse an existing commit in case of <<fast-forwards,fast-forward>>, see below). On the other hand, if there are conflicts--for example, if the same file is @@ -3640,6 +3640,26 @@ Did you forget to 'git add'? Unable to checkout '261dfac35cb99d380eb966e102c1197139f7fa24' in submodule path 'a' ------------------------------------------------- +In older git versions it could be easily forgotten to commit new or modified +files in a submodule, which silently leads to similar problems as not pushing +the submodule changes. Starting with git 1.7.0 both "git status" and "git diff" +in the superproject show submodules as modified when they contain new or +modified files to protect against accidentally committing such a state. "git +diff" will also add a "-dirty" to the work tree side when generating patch +output or used with the --submodule option: + +------------------------------------------------- +$ git diff +diff --git a/sub b/sub +--- a/sub ++++ b/sub +@@ -1 +1 @@ +-Subproject commit 3f356705649b5d566d97ff843cf193359229a453 ++Subproject commit 3f356705649b5d566d97ff843cf193359229a453-dirty +$ git diff --submodule +Submodule sub 3f35670..3f35670-dirty: +------------------------------------------------- + You also should not rewind branches in a submodule beyond commits that were ever recorded in any superproject. |