diff options
Diffstat (limited to 'Documentation')
230 files changed, 8234 insertions, 2846 deletions
diff --git a/Documentation/.gitignore b/Documentation/.gitignore index 1c3a9fead5..d62aebd848 100644 --- a/Documentation/.gitignore +++ b/Documentation/.gitignore @@ -3,6 +3,7 @@ *.[1-8] *.made *.texi +*.pdf git.info gitman.info howto-index.txt diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index b8bf618a30..fe1c1e5bc2 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -31,25 +31,36 @@ But if you must have a list of rules, here they are. For shell scripts specifically (not exhaustive): + - We use tabs for indentation. + + - Case arms are indented at the same depth as case and esac lines. + - We prefer $( ... ) for command substitution; unlike ``, it properly nests. It should have been the way Bourne spelled it from day one, but unfortunately isn't. - - We use ${parameter-word} and its [-=?+] siblings, and their - colon'ed "unset or null" form. + - We use POSIX compliant parameter substitutions and avoid bashisms; + namely: - - We use ${parameter#word} and its [#%] siblings, and their - doubled "longest matching" form. + - We use ${parameter-word} and its [-=?+] siblings, and their + colon'ed "unset or null" form. - - We use Arithmetic Expansion $(( ... )). + - We use ${parameter#word} and its [#%] siblings, and their + doubled "longest matching" form. - - No "Substring Expansion" ${parameter:offset:length}. + - No "Substring Expansion" ${parameter:offset:length}. - - No shell arrays. + - No shell arrays. - - No strlen ${#parameter}. + - No strlen ${#parameter}. - - No regexp ${parameter/pattern/string}. + - No pattern replacement ${parameter/pattern/string}. + + - We use Arithmetic Expansion $(( ... )). + + - Inside Arithmetic Expansion, spell shell variables with $ in front + of them, as some shells do not grok $((x)) while accepting $(($x)) + just fine (e.g. dash older than 0.5.4). - We do not use Process Substitution <(list) or >(list). @@ -132,3 +143,55 @@ For C programs: - When we pass <string, length> pair to functions, we should try to pass them in that order. + +Writing Documentation: + + Every user-visible change should be reflected in the documentation. + The same general rule as for code applies -- imitate the existing + conventions. A few commented examples follow to provide reference + when writing or modifying command usage strings and synopsis sections + in the manual pages: + + Placeholders are spelled in lowercase and enclosed in angle brackets: + <file> + --sort=<key> + --abbrev[=<n>] + + Possibility of multiple occurrences is indicated by three dots: + <file>... + (One or more of <file>.) + + Optional parts are enclosed in square brackets: + [<extra>] + (Zero or one <extra>.) + + --exec-path[=<path>] + (Option with an optional argument. Note that the "=" is inside the + brackets.) + + [<patch>...] + (Zero or more of <patch>. Note that the dots are inside, not + outside the brackets.) + + Multiple alternatives are indicated with vertical bar: + [-q | --quiet] + [--utf8 | --no-utf8] + + Parentheses are used for grouping: + [(<rev>|<range>)...] + (Any number of either <rev> or <range>. Parens are needed to make + it clear that "..." pertains to both <rev> and <range>.) + + [(-p <parent>)...] + (Any number of option -p, each with one <parent> argument.) + + git remote set-head <name> (-a | -d | <branch>) + (One and only one of "-a", "-d" or "<branch>" _must_ (no square + brackets) be provided.) + + And a somewhat more contrived example: + --diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]] + Here "=" is outside the brackets, because "--diff-filter=" is a + valid usage. "*" has its own pair of brackets, because it can + (optionally) be specified only when one or more of the letters is + also provided. diff --git a/Documentation/Makefile b/Documentation/Makefile index e117bc4315..304b31edee 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,12 +1,12 @@ MAN1_TXT= \ $(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \ $(wildcard git-*.txt)) \ - gitk.txt git.txt + gitk.txt gitweb.txt git.txt MAN5_TXT=gitattributes.txt gitignore.txt gitmodules.txt githooks.txt \ - gitrepository-layout.txt + gitrepository-layout.txt gitweb.conf.txt MAN7_TXT=gitcli.txt gittutorial.txt gittutorial-2.txt \ gitcvs-migration.txt gitcore-tutorial.txt gitglossary.txt \ - gitdiffcore.txt gitrevisions.txt gitworkflows.txt + gitdiffcore.txt gitnamespaces.txt gitrevisions.txt gitworkflows.txt MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) @@ -46,8 +46,8 @@ MANPAGE_XSL = manpage-normal.xsl XMLTO_EXTRA = INSTALL?=install RM ?= rm -f -DOC_REF = origin/man -HTML_REF = origin/html +MAN_REPO = ../../git-manpages +HTML_REPO = ../../git-htmldocs infodir?=$(prefix)/share/info MAKEINFO=makeinfo @@ -63,35 +63,28 @@ endif # # For asciidoc ... -# -7.1.2, no extra settings are needed. -# 8.0-, set ASCIIDOC8. +# -7.1.2, set ASCIIDOC7 +# 8.0-, no extra settings are needed # # # For docbook-xsl ... -# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0) -# 1.69.0, no extra settings are needed? +# -1.68.1, no extra settings are needed? +# 1.69.0, set ASCIIDOC_ROFF? # 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? -# 1.71.1, no extra settings are needed? +# 1.71.1, set ASCIIDOC_ROFF? # 1.72.0, set DOCBOOK_XSL_172. -# 1.73.0-, set ASCIIDOC_NO_ROFF +# 1.73.0-, no extra settings are needed # -# -# If you had been using DOCBOOK_XSL_172 in an attempt to get rid -# of 'the ".ft C" problem' in your generated manpages, and you -# instead ended up with weird characters around callouts, try -# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8). -# - -ifdef ASCIIDOC8 +ifndef ASCIIDOC7 ASCIIDOC_EXTRA += -a asciidoc7compatible -a no-inline-literal endif ifdef DOCBOOK_XSL_172 ASCIIDOC_EXTRA += -a git-asciidoc-no-roff MANPAGE_XSL = manpage-1.72.xsl else - ifdef ASCIIDOC_NO_ROFF + ifndef ASCIIDOC_ROFF # docbook-xsl after 1.72 needs the regular XSL, but will not # pass-thru raw roff codes from asciidoc.conf, so turn them off. ASCIIDOC_EXTRA += -a git-asciidoc-no-roff @@ -239,6 +232,7 @@ cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT) clean: $(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7 $(RM) *.texi *.texi+ *.texi++ git.info gitman.info + $(RM) *.pdf $(RM) howto-index.txt howto/*.html doc.dep $(RM) technical/api-*.html technical/api-index.txt $(RM) $(cmds_txt) *.made @@ -333,12 +327,23 @@ $(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt install-webdoc : html '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST) +# You must have a clone of git-htmldocs and git-manpages repositories +# next to the git repository itself for the following to work. + quick-install: quick-install-man -quick-install-man: - '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir) +require-manrepo:: + @if test ! -d $(MAN_REPO); \ + then echo "git-manpages repository must exist at $(MAN_REPO)"; exit 1; fi + +quick-install-man: require-manrepo + '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(MAN_REPO) $(DESTDIR)$(mandir) + +require-htmlrepo:: + @if test ! -d $(HTML_REPO); \ + then echo "git-htmldocs repository must exist at $(HTML_REPO)"; exit 1; fi -quick-install-html: - '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir) +quick-install-html: require-htmlrepo + '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REPO) $(DESTDIR)$(htmldir) .PHONY: FORCE diff --git a/Documentation/RelNotes/1.6.4.5.txt b/Documentation/RelNotes/1.6.4.5.txt new file mode 100644 index 0000000000..eb6307dcbb --- /dev/null +++ b/Documentation/RelNotes/1.6.4.5.txt @@ -0,0 +1,20 @@ +Git v1.6.4.5 Release Notes +========================== + +Fixes since v1.6.4.4 +-------------------- + + * Simplified base85 implementation. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git count-objects" did not handle packs larger than 4G. + + * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option + when --keep-dashdash was in effect. + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. + +Other minor fixes and documentation updates are included. diff --git a/Documentation/RelNotes/1.6.5.9.txt b/Documentation/RelNotes/1.6.5.9.txt new file mode 100644 index 0000000000..bb469dd71e --- /dev/null +++ b/Documentation/RelNotes/1.6.5.9.txt @@ -0,0 +1,18 @@ +Git v1.6.5.9 Release Notes +========================== + +Fixes since v1.6.5.8 +-------------------- + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git blame -L $start,$end" segfaulted when too large $start was given. + + * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option + when --keep-dashdash was in effect. + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. + +Other minor fixes and documentation updates are included. diff --git a/Documentation/RelNotes/1.6.6.3.txt b/Documentation/RelNotes/1.6.6.3.txt new file mode 100644 index 0000000000..11483acaec --- /dev/null +++ b/Documentation/RelNotes/1.6.6.3.txt @@ -0,0 +1,23 @@ +Git v1.6.6.3 Release Notes +========================== + +Fixes since v1.6.6.2 +-------------------- + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git bisect $path" did not correctly diagnose an error when given a + non-existent path. + + * "git blame -L $start,$end" segfaulted when too large $start was given. + + * "git imap-send" did not write draft box with CRLF line endings per RFC. + + * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option + when --keep-dashdash was in effect. + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. + +Other minor fixes and documentation updates are included. diff --git a/Documentation/RelNotes/1.7.0.8.txt b/Documentation/RelNotes/1.7.0.8.txt new file mode 100644 index 0000000000..7f05b48e17 --- /dev/null +++ b/Documentation/RelNotes/1.7.0.8.txt @@ -0,0 +1,10 @@ +Git v1.7.0.8 Release Notes +========================== + +This is primarily to backport support for the new "add.ignoreErrors" +name given to the existing "add.ignore-errors" configuration variable. + +The next version, Git 1.7.4, and future versions, will support both +old and incorrect name and the new corrected name, but without this +backport, users who want to use the new name "add.ignoreErrors" in +their repositories cannot use older versions of Git. diff --git a/Documentation/RelNotes/1.7.0.9.txt b/Documentation/RelNotes/1.7.0.9.txt new file mode 100644 index 0000000000..bfb3166387 --- /dev/null +++ b/Documentation/RelNotes/1.7.0.9.txt @@ -0,0 +1,8 @@ +Git v1.7.0.9 Release Notes +========================== + +Fixes since v1.7.0.8 +-------------------- + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. diff --git a/Documentation/RelNotes/1.7.1.3.txt b/Documentation/RelNotes/1.7.1.3.txt new file mode 100644 index 0000000000..5b18518449 --- /dev/null +++ b/Documentation/RelNotes/1.7.1.3.txt @@ -0,0 +1,10 @@ +Git v1.7.1.3 Release Notes +========================== + +This is primarily to backport support for the new "add.ignoreErrors" +name given to the existing "add.ignore-errors" configuration variable. + +The next version, Git 1.7.4, and future versions, will support both +old and incorrect name and the new corrected name, but without this +backport, users who want to use the new name "add.ignoreErrors" in +their repositories cannot use older versions of Git. diff --git a/Documentation/RelNotes/1.7.1.4.txt b/Documentation/RelNotes/1.7.1.4.txt new file mode 100644 index 0000000000..7c734b4f7b --- /dev/null +++ b/Documentation/RelNotes/1.7.1.4.txt @@ -0,0 +1,8 @@ +Git v1.7.1.4 Release Notes +========================== + +Fixes since v1.7.1.3 +-------------------- + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. diff --git a/Documentation/RelNotes/1.7.2.4.txt b/Documentation/RelNotes/1.7.2.4.txt new file mode 100644 index 0000000000..f7950a4c04 --- /dev/null +++ b/Documentation/RelNotes/1.7.2.4.txt @@ -0,0 +1,10 @@ +Git v1.7.2.4 Release Notes +========================== + +This is primarily to backport support for the new "add.ignoreErrors" +name given to the existing "add.ignore-errors" configuration variable. + +The next version, Git 1.7.4, and future versions, will support both +old and incorrect name and the new corrected name, but without this +backport, users who want to use the new name "add.ignoreErrors" in +their repositories cannot use older versions of Git. diff --git a/Documentation/RelNotes/1.7.2.5.txt b/Documentation/RelNotes/1.7.2.5.txt new file mode 100644 index 0000000000..bf976c40db --- /dev/null +++ b/Documentation/RelNotes/1.7.2.5.txt @@ -0,0 +1,8 @@ +Git v1.7.2.5 Release Notes +========================== + +Fixes since v1.7.2.4 +-------------------- + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. diff --git a/Documentation/RelNotes/1.7.3.1.txt b/Documentation/RelNotes/1.7.3.1.txt new file mode 100644 index 0000000000..002c93b961 --- /dev/null +++ b/Documentation/RelNotes/1.7.3.1.txt @@ -0,0 +1,14 @@ +Git v1.7.3.1 Release Notes +========================== + +Fixes since v1.7.3 +------------------ + + * "git stash show stash@{$n}" was accidentally broken in 1.7.3 ("git + stash show" without any argument still worked, though). + + * "git stash branch $branch stash@{$n}" was accidentally broken in + 1.7.3 and started dropping the named stash even when branch creation + failed. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.3.2.txt b/Documentation/RelNotes/1.7.3.2.txt new file mode 100644 index 0000000000..5c93b85af4 --- /dev/null +++ b/Documentation/RelNotes/1.7.3.2.txt @@ -0,0 +1,5 @@ +Git v1.7.3.2 Release Notes +========================== + +This is primarily to push out many documentation fixes accumulated since +the 1.7.3.1 release. diff --git a/Documentation/RelNotes/1.7.3.3.txt b/Documentation/RelNotes/1.7.3.3.txt new file mode 100644 index 0000000000..9b2b2448df --- /dev/null +++ b/Documentation/RelNotes/1.7.3.3.txt @@ -0,0 +1,54 @@ +Git v1.7.3.3 Release Notes +========================== + +In addition to the usual fixes, this release also includes support for +the new "add.ignoreErrors" name given to the existing "add.ignore-errors" +configuration variable. + +The next version, Git 1.7.4, and future versions, will support both +old and incorrect name and the new corrected name, but without this +backport, users who want to use the new name "add.ignoreErrors" in +their repositories cannot use older versions of Git. + +Fixes since v1.7.3.2 +-------------------- + + * "git apply" segfaulted when a bogus input is fed to it. + + * Running "git cherry-pick --ff" on a root commit segfaulted. + + * "diff", "blame" and friends incorrectly applied textconv filters to + symlinks. + + * Highlighting of whitespace breakage in "diff" output was showing + incorrect amount of whitespaces when blank-at-eol is set and the line + consisted only of whitespaces and a TAB. + + * "diff" was overly inefficient when trying to find the line to use for + the function header (i.e. equivalent to --show-c-function of GNU diff). + + * "git imap-send" depends on libcrypto but our build rule relied on the + linker to implicitly link it via libssl, which was wrong. + + * "git merge-file" can be called from within a subdirectory now. + + * "git repack -f" expanded and recompressed non-delta objects in the + existing pack, which was wasteful. Use new "-F" option if you really + want to (e.g. when changing the pack.compression level). + + * "git rev-list --format="...%x00..." incorrectly chopped its output + at NUL. + + * "git send-email" did not correctly remove duplicate mail addresses from + the Cc: header that appear on the To: header. + + * The completion script (in contrib/completion) ignored lightweight tags + in __git_ps1(). + + * "git-blame" mode (in contrib/emacs) didn't say (require 'format-spec) + even though it depends on it; it didn't work with Emacs 22 or older + unless Gnus is used. + + * "git-p4" (in contrib/) did not correctly handle deleted files. + +Other minor fixes and documentation updates are also included. diff --git a/Documentation/RelNotes/1.7.3.4.txt b/Documentation/RelNotes/1.7.3.4.txt new file mode 100644 index 0000000000..e57f7c176d --- /dev/null +++ b/Documentation/RelNotes/1.7.3.4.txt @@ -0,0 +1,45 @@ +Git v1.7.3.4 Release Notes +========================== + +Fixes since v1.7.3.3 +-------------------- + + * Smart HTTP transport used to incorrectly retry redirected POST + request with GET request. + + * "git apply" did not correctly handle patches that only change modes + if told to apply while stripping leading paths with -p option. + + * "git apply" can deal with patches with timezone formatted with a + colon between the hours and minutes part (e.g. "-08:00" instead of + "-0800"). + + * "git checkout" removed an untracked file "foo" from the working + tree when switching to a branch that contains a tracked path + "foo/bar". Prevent this, just like the case where the conflicting + path were "foo" (c752e7f..7980872d). + + * "git cherry-pick" or "git revert" refused to work when a path that + would be modified by the operation was stat-dirty without a real + difference in the contents of the file. + + * "git diff --check" reported an incorrect line number for added + blank lines at the end of file. + + * "git imap-send" failed to build under NO_OPENSSL. + + * Setting log.decorate configuration variable to "0" or "1" to mean + "false" or "true" did not work. + + * "git push" over dumb HTTP protocol did not work against WebDAV + servers that did not terminate a collection name with a slash. + + * "git tag -v" did not work with GPG signatures in rfc1991 mode. + + * The post-receive-email sample hook was accidentally broken in 1.7.3.3 + update. + + * "gitweb" can sometimes be tricked into parrotting a filename argument + given in a request without properly quoting. + +Other minor fixes and documentation updates are also included. diff --git a/Documentation/RelNotes/1.7.3.5.txt b/Documentation/RelNotes/1.7.3.5.txt new file mode 100644 index 0000000000..40f3ba5795 --- /dev/null +++ b/Documentation/RelNotes/1.7.3.5.txt @@ -0,0 +1,34 @@ +Git 1.7.3.5 Release Notes +========================= + + * The xfuncname pattern used by "git diff" and "git grep" to show the + last notable line in context were broken for python and ruby for a long + time. + + * "git merge" into an unborn branch removed an untracked file "foo" from + the working tree when merged branch had "foo" (this fix was already in + 1.7.3.3 but was omitted from the release notes by mistake). + + * "git status -s" did not quote unprintable characters in paths as + documented. + + * "git am --abort" used to always reset to the commit at the beginning of + the last "am" invocation that has stopped, losing any unrelated commits + that may have been made since then. Now it refrains from doing so and + instead issues a warning. + + * "git blame" incorrectly reused bogusly cached result of textconv + filter for files from the working tree. + + * "git commit" used to abort after the user edited the log message + when the committer information was not correctly set up. It now + aborts before starting the editor. + + * "git commit --date=invalid" used to silently ignore the incorrectly + specified date; it is now diagnosed as an error. + + * "git rebase --skip" to skip the last commit in a series used to fail + to run post-rewrite hook and to copy notes from old commits that have + successfully been rebased so far. Now it do (backmerge ef88ad2). + + * "gitweb" tried to show a wrong feed logo when none was specified. diff --git a/Documentation/RelNotes/1.7.4.1.txt b/Documentation/RelNotes/1.7.4.1.txt new file mode 100644 index 0000000000..79923a6d2f --- /dev/null +++ b/Documentation/RelNotes/1.7.4.1.txt @@ -0,0 +1,27 @@ +Git v1.7.4.1 Release Notes +========================== + +Fixes since v1.7.4 +------------------ + + * On Windows platform, the codepath to spawn a new child process forgot + to first flush the output buffer. + + * "git bundle" did not use OFS_DELTA encoding, making its output a few + per-cent larger than necessarily. + + * The option to tell "git clone" to recurse into the submodules was + misspelled with an underscore "--recurse_submodules". + + * "git diff --cached HEAD" before the first commit does what an end user + would expect (namely, show what would be committed without further "git + add"). + + * "git fast-import" didn't accept the command to ask for "notes" feature + to be present in its input stream, even though it was capable of the + feature. + + * "git fsck" gave up scanning loose object files in directories with + garbage files. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.2.txt b/Documentation/RelNotes/1.7.4.2.txt new file mode 100644 index 0000000000..ef4ce1fcd3 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.2.txt @@ -0,0 +1,58 @@ +Git v1.7.4.2 Release Notes +========================== + +Fixes since v1.7.4.1 +-------------------- + + * Many documentation updates to match "git cmd -h" output and the + git-cmd manual page. + + * We used to keep one file descriptor open for each and every packfile + that we have a mmap window on it (read: "in use"), even when for very + tiny packfiles. We now close the file descriptor early when the entire + packfile fits inside one mmap window. + + * "git bisect visualize" tried to run "gitk" in windowing + environments even when "gitk" is not installed, resulting in a + strange error message. + + * "git clone /no/such/path" did not fail correctly. + + * "git commit" did not correctly error out when the user asked to use a + non existent file as the commit message template. + + * "git diff --stat -B" ran on binary files counted the changes in lines, + which was nonsensical. + + * "git diff -M" opportunistically detected copies, which was not + necessarily a good thing, especially when it is internally run by + recursive merge. + + * "git difftool" didn't tell (g)vimdiff that the files it is reading are + to be opened read-only. + + * "git merge" didn't pay attention to prepare-commit-msg hook, even + though if a merge is conflicted and manually resolved, the subsequent + "git commit" would have triggered the hook, which was inconsistent. + + * "git patch-id" (and commands like "format-patch --ignore-in-upstream" + that use it as their internal logic) handled changes to files that end + with incomplete lines incorrectly. + + * The official value to tell "git push" to push the current branch back + to update the upstream branch it forked from is now called "upstream". + The old name "tracking" is and will be supported. + + * "git submodule update" used to honor the --merge/--rebase option (or + corresponding configuration variables) even for a newly cloned + subproject, which made no sense (so/submodule-no-update-first-time). + + * gitweb's "highlight" interface mishandled tabs. + + * gitweb didn't understand timezones with GMT offset that is not + multiple of a whole hour. + + * gitweb had a few forward-incompatible syntactic constructs and + also used incorrect variable when showing the file mode in a diff. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.3.txt b/Documentation/RelNotes/1.7.4.3.txt new file mode 100644 index 0000000000..02a3d5bdf6 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.3.txt @@ -0,0 +1,32 @@ +Git v1.7.4.3 Release Notes +========================== + +Fixes since v1.7.4.2 +-------------------- + + * "git apply" used to confuse lines updated by previous hunks as lines + that existed before when applying a hunk, contributing misapplication + of patches with offsets. + + * "git branch --track" (and "git checkout --track --branch") used to + allow setting up a random non-branch that does not make sense to follow + as the "upstream". The command correctly diagnoses it as an error. + + * "git checkout $other_branch" silently removed untracked symbolic links + in the working tree that are in the way in order to check out paths + under it from the named branch. + + * "git cvsimport" did not bail out immediately when the cvs server cannot + be reached, spewing unnecessary error messages that complain about the + server response that it never got. + + * "git diff --quiet" did not work very well with the "--diff-filter" + option. + + * "git grep -n" lacked a long-hand synonym --line-number. + + * "git stash apply" reported the result of its operation by running + "git status" from the top-level of the working tree; it should (and + now does) run it from the user's working directory. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.4.txt b/Documentation/RelNotes/1.7.4.4.txt new file mode 100644 index 0000000000..ff06e04a58 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.4.txt @@ -0,0 +1,35 @@ +Git v1.7.4.4 Release Notes +========================== + +Fixes since v1.7.4.3 +-------------------- + + * Compilation of sha1_file.c on BSD platforms were broken due to our + recent use of getrlimit() without including <sys/resource.h>. + + * "git config" did not diagnose incorrect configuration variable names. + + * "git format-patch" did not wrap a long subject line that resulted from + rfc2047 encoding. + + * "git instaweb" should work better again with plackup. + + * "git log --max-count=4 -Sfoobar" now shows 4 commits that changes the + number of occurrences of string "foobar"; it used to scan only for 4 + commits and then emitted only matching ones. + + * "git log --first-parent --boundary $c^..$c" segfaulted on a merge. + + * "git pull" into an empty branch should have behaved as if + fast-forwarding from emptiness to the version being pulled, with + the usual protection against overwriting untracked files. + + * "git submodule" that is run while a merge in the superproject is in + conflicted state tried to process each conflicted submodule up to + three times. + + * "git status" spent all the effort to notice racily-clean index entries + but didn't update the index file to help later operations go faster in + some cases. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.5.txt b/Documentation/RelNotes/1.7.4.5.txt new file mode 100644 index 0000000000..b7a0eeb22f --- /dev/null +++ b/Documentation/RelNotes/1.7.4.5.txt @@ -0,0 +1,4 @@ +Git v1.7.4.5 Release Notes +========================== + +This contains only minor documentation fixes accumulated since 1.7.4.4. diff --git a/Documentation/RelNotes/1.7.4.txt b/Documentation/RelNotes/1.7.4.txt new file mode 100644 index 0000000000..d5bca731b5 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.txt @@ -0,0 +1,156 @@ +Git v1.7.4 Release Notes +======================== + +Updates since v1.7.3 +-------------------- + + * The documentation Makefile now assumes by default asciidoc 8 and + docbook-xsl >= 1.73. If you have older versions, you can set + ASCIIDOC7 and ASCIIDOC_ROFF, respectively. + + * The option parsers of various commands that create new branches (or + rename existing ones to a new name) were too loose and users were + allowed to give a branch a name that begins with a dash by creative + abuse of their command line options, which only led to burning + themselves. The name of a branch cannot begin with a dash now. + + * System-wide fallback default attributes can be stored in + /etc/gitattributes; the core.attributesfile configuration variable can + be used to customize the path to this file. + + * The thread structure generated by "git send-email" has changed + slightly. Setting the cover letter of the latest series as a reply + to the cover letter of the previous series with --in-reply-to used + to make the new cover letter and all the patches replies to the + cover letter of the previous series; this has been changed to make + the patches in the new series replies to the new cover letter. + + * The Bash completion script in contrib/ has been adjusted to be usable with + Bash 4 (options with '=value' didn't complete). It has been also made + usable with zsh. + + * Different pagers can be chosen depending on which subcommand is + being run under the pager, using the "pager.<subcommand>" variable. + + * The hardcoded tab-width of 8 that is used in whitespace breakage checks is now + configurable via the attributes mechanism. + + * Support of case insensitive filesystems (i.e. "core.ignorecase") has + been improved. For example, the gitignore mechanism didn't pay attention + to case insensitivity. + + * The <tree>:<path> syntax for naming a blob in a tree, and the :<path> + syntax for naming a blob in the index (e.g. "master:Makefile", + ":hello.c") have been extended. You can start <path> with "./" to + implicitly have the (sub)directory you are in prefixed to the + lookup. Similarly, ":../Makefile" from a subdirectory would mean + "the Makefile of the parent directory in the index". + + * "git blame" learned the --show-email option to display the e-mail + addresses instead of the names of authors. + + * "git commit" learned the --fixup and --squash options to help later invocation + of interactive rebase. + + * Command line options to "git cvsimport" whose names are in capital + letters (-A, -M, -R and -S) can now be specified as the default in + the .git/config file by their longer names (cvsimport.authorsFile, + cvsimport.mergeRegex, cvsimport.trackRevisions, cvsimport.ignorePaths). + + * "git daemon" can be built in the MinGW environment. + + * "git daemon" can take more than one --listen option to listen to + multiple addresses. + + * "git describe --exact-match" was optimized not to read commit + objects unnecessarily. + + * "git diff" and "git grep" learned what functions and subroutines + in Fortran, Pascal and Perl look like. + + * "git fetch" learned the "--recurse-submodules" option. + + * "git mergetool" tells vim/gvim to show a three-way diff by default + (use vimdiff2/gvimdiff2 as the tool name for old behavior). + + * "git log -G<pattern>" limits the output to commits whose change has + added or deleted lines that match the given pattern. + + * "git read-tree" with no argument as a way to empty the index is + deprecated; we might want to remove it in the future. Users can + use the new --empty option to be more explicit instead. + + * "git repack -f" does not spend cycles to recompress objects in the + non-delta representation anymore (use -F if you really mean it + e.g. after you changed the core.compression variable setting). + + * "git merge --log" used to limit the resulting merge log to 20 + entries; this is now customizable by giving e.g. "--log=47". + + * "git merge" may work better when all files were moved out of a + directory in one branch while a new file is created in place of that + directory in the other branch. + + * "git merge" learned the "--abort" option, synonymous to + "git reset --merge" when a merge is in progress. + + * "git notes" learned the "merge" subcommand to merge notes refs. + In addition to the default manual conflict resolution, there are + also several notes merge strategies for automatically resolving + notes merge conflicts. + + * "git rebase --autosquash" can use SHA-1 object names to name the + commit which is to be fixed up (e.g. "fixup! e83c5163"). + + * The default "recursive" merge strategy learned the --rename-threshold + option to influence the rename detection, similar to the -M option + of "git diff". From the "git merge" frontend, the "-X<strategy option>" + interface, e.g. "git merge -Xrename-threshold=50% ...", can be used + to trigger this. + + * The "recursive" strategy also learned to ignore various whitespace + changes; the most notable is -Xignore-space-at-eol. + + * "git send-email" learned "--to-cmd", similar to "--cc-cmd", to read + the recipient list from a command output. + + * "git send-email" learned to read and use "To:" from its input files. + + * you can extend "git shell", which is often used on boxes that allow + git-only login over ssh as login shell, with a custom set of + commands. + + * The current branch name in "git status" output can be colored differently + from the generic header color by setting the "color.status.branch" variable. + + * "git submodule sync" updates metainformation for all submodules, + not just the ones that have been checked out. + + * gitweb can use a custom 'highlight' command with its configuration file. + + * other gitweb updates. + + +Also contains various documentation updates. + + +Fixes since v1.7.3 +------------------ + +All of the fixes in the v1.7.3.X maintenance series are included in this +release, unless otherwise noted. + + * "git log --author=me --author=her" did not find commits written by + me or by her; instead it looked for commits written by me and by + her, which is impossible. + + * "git push --progress" shows progress indicators now. + + * "git rebase -i" showed a confusing error message when given a + branch name that does not exist. + + * "git repack" places its temporary packs under $GIT_OBJECT_DIRECTORY/pack + instead of $GIT_OBJECT_DIRECTORY/ to avoid cross directory renames. + + * "git submodule update --recursive --other-flags" passes flags down + to its subinvocations. diff --git a/Documentation/RelNotes/1.7.5.1.txt b/Documentation/RelNotes/1.7.5.1.txt new file mode 100644 index 0000000000..c6ebd76d19 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.1.txt @@ -0,0 +1,47 @@ +Git v1.7.5.1 Release Notes +========================== + +Fixes since v1.7.5 +------------------ + + * When an object "$tree:$path" does not exist, if $path does exist in the + subtree of $tree that corresponds to the subdirectory the user is in, + git now suggests using "$tree:./$path" in addition to the advice to use + the full path from the root of the working tree. + + * The "--date=relative" output format used to say "X years, 12 months" + when it should have said "X+1 years". + + * The smart-HTTP transfer was broken in 1.7.5 when the client needs + to issue a small POST (which uses content-length) and then a large + POST (which uses chunked) back to back. + + * "git clean" used to fail on an empty directory that is not readable, + even though rmdir(2) could remove such a directory. Now we attempt it + as the last resort. + + * The "--dirstat" option of "diff" family of commands used to totally + ignore a change that only rearranged lines within a file. Such a + change now counts as at least a minimum but non zero change. + + * The "--dirstat" option of "diff" family of commands used to use the + pathname in the original, instead of the pathname in the result, + when renames are involved. + + * "git pack-object" did not take core.bigfilethreashold into account + (unlike fast-import); now it does. + + * "git reflog" ignored options like "--format=.." on the command line. + + * "git stash apply" used to refuse to work if there was any change in + the working tree, even when the change did not overlap with the change + the stash recorded. + + * "git stash apply @{99999}" was not diagnosed as an error, even when you + did not have that many stash entries. + + * An error message from "git send-email" to diagnose a broken SMTP + connection configuration lacked a space between "hello=<smtp-domain>" + and "port=<smtp-server-port>". + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.2.txt b/Documentation/RelNotes/1.7.5.2.txt new file mode 100644 index 0000000000..951eb7cb08 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.2.txt @@ -0,0 +1,57 @@ +Git v1.7.5.2 Release Notes +========================== + +The release notes to 1.7.5.1 forgot to mention: + + * "git stash -p --no-keep-index" and "git stash --no-keep-index -p" now + mean the same thing. + + * "git upload-pack" (hence "git push" over git native protocol) had a + subtle race condition that could lead to a deadlock. + +Fixes since v1.7.5.1 +-------------------- + + * "git add -p" did not work correctly when a hunk is split and then + one of them was given to the editor. + + * "git add -u" did not resolve a conflict where our history deleted and + their history modified the same file, and the working tree resolved to + keep a file. + + * "git cvsimport" did not know that CVSNT stores its password file in a + location different from the traditional CVS. + + * "git diff-files" did not show the mode information from the working + tree side of an unmerged path correctly. + + * "git diff -M --cached" used to use unmerged path as a possible rename + source candidate, which made no sense. + + * The option name parser in "git fast-import" used prefix matches for + some options where it shouldn't, and accepted non-existent options, + e.g. "--relative-marksmith" or "--forceps". + + * "git format-patch" did not quote RFC822 special characters in the + email address (e.g From: Junio C. Hamano <jch@example.com>, not + From: "Junio C. Hamano" <jch@example.com>). + + * "git format-patch" when run with "--quiet" option used to produce a + nonsense result that consists of alternating empty output. + + * In "git merge", per-branch branch.<name>.mergeoptions configuration + variables did not override the fallback default merge.<option> + configuration variables such as merge.ff, merge.log, etc. + + * "git merge-one-file" did not honor GIT_WORK_TREE settings when + handling a "both sides added, differently" conflict. + + * "git mergetool" did not handle conflicted submoudules gracefully. + + * "git-p4" (in contrib) used a wrong base image while merge a file that + was added on both branches differently. + + * "git rebase -i -p" failed to preserve the history when there is a + redundant merge created with the --no-ff option. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.3.txt b/Documentation/RelNotes/1.7.5.3.txt new file mode 100644 index 0000000000..9c03353af2 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.3.txt @@ -0,0 +1,32 @@ +Git v1.7.5.3 Release Notes +========================== + +Fixes since v1.7.5.2 +-------------------- + + * The bash completion scripts should correctly work using zsh's bash + completion emulation layer now. + + * Setting $(prefix) in config.mak did not affect where etc/gitconfig + file is read from, even though passing it from the command line of + $(MAKE) did. + + * The logic to handle "&" (expand to UNIX username) in GECOS field + miscounted the length of the name it formatted. + + * "git cherry-pick -s resolve" failed to cherry-pick a root commit. + + * "git diff --word-diff" misbehaved when diff.suppress-blank-empty was + in effect. + + * "git log --stdin path" with an input that has additional pathspec + used to corrupt memory. + + * "git send-pack" (hence "git push") over smalt-HTTP protocol could + deadlock when the client side pack-object died early. + + * Compressed tarball gitweb generates used to be made with the timestamp + of the tarball generation; this was bad because snapshot from the same + tree should result in a same tarball. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.4.txt b/Documentation/RelNotes/1.7.5.4.txt new file mode 100644 index 0000000000..cf3f455ced --- /dev/null +++ b/Documentation/RelNotes/1.7.5.4.txt @@ -0,0 +1,21 @@ +Git v1.7.5.4 Release Notes +========================== + +Fixes since v1.7.5.3 +-------------------- + + * The single-key mode of "git add -p" was easily fooled into thinking + that it was told to add everthing ('a') when up-arrow was pressed by + mistake. + + * Setting a git command that uses custom configuration via "-c var=val" + as an alias caused a crash due to a realloc(3) failure. + + * "git diff -C -C" used to disable the rename detection entirely when + there are too many copy candidate paths in the tree; now it falls + back to "-C" when doing so would keep the copy candidate paths + under the rename detection limit. + + * "git rerere" did not diagnose a corrupt MERGE_RR file in some cases. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.5.txt b/Documentation/RelNotes/1.7.5.txt new file mode 100644 index 0000000000..987919c321 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.txt @@ -0,0 +1,132 @@ +Git v1.7.5 Release Notes +======================== + +Updates since v1.7.4 +-------------------- + + * Various MinGW portability fixes. + + * Various git-p4 enhancements (in contrib). + + * Various vcs-svn, git-svn and gitk enhancements and fixes. + + * Various git-gui updates (0.14.0). + + * Update to more modern HP-UX port. + + * The codebase is getting prepared for i18n/l10n; no translated + strings nor translation mechanism in the code yet, but the strings + are being marked for l10n. + + * The bash completion script can now complete symmetric difference + for "git diff" command, e.g. "git diff ...bra<TAB>". + + * The default minimum length of abbreviated and unique object names + can now be configured by setting the core.abbrev configuration + variable. + + * "git apply -v" reports offset lines when the patch does not apply at + the exact location recorded in the diff output. + + * "git config" used to be also known as "git repo-config", but the old + name is now officially deprecated. + + * "git checkout --detach <commit>" is a more user friendly synonym for + "git checkout <commit>^0". + + * "git checkout" performed on detached HEAD gives a warning and + advice when the commit being left behind will become unreachable from + any branch or tag. + + * "git cherry-pick" and "git revert" can be told to use a custom merge + strategy, similar to "git rebase". + + * "git cherry-pick" remembers which commit failed to apply when it is + stopped by conflicts, making it unnecessary to use "commit -c $commit" + to conclude it. + + * "git cvsimport" bails out immediately when the cvs server cannot be + reached, without spewing unnecessary error messages that complain about + the server response it never got. + + * "git fetch" vs "git upload-pack" transfer learned 'no-done' + protocol extension to save one round-trip after the content + negotiation is done. This saves one HTTP RPC, reducing the overall + latency for a trivial fetch. + + * "git fetch" can be told to recursively fetch submodules on-demand. + + * "git grep -f <filename>" learned to treat "-" as "read from the + standard input stream". + + * "git grep --no-index" did not honor pathspecs correctly, returning + paths outside the specified area. + + * "git init" learned the --separate-git-dir option to allow the git + directory for a new repository created elsewhere and linked via the + gitdir mechanism. This is primarily to help submodule support later + to switch between a branch of superproject that has the submodule + and another that does not. + + * "git log" type commands now understand globbing pathspecs. You + can say "git log -- '*.txt'" for example. + + * "git log" family of commands learned --cherry and --cherry-mark + options that can be used to view two diverged branches while omitting + or highlighting equivalent changes that appear on both sides of a + symmetric difference (e.g. "log --cherry A...B"). + + * A lazy "git merge" that didn't say what to merge used to be an error. + When run on a branch that has an upstream defined, however, the command + now merges from the configured upstream. + + * "git mergetool" learned how to drive "beyond compare 3" as well. + + * "git rerere forget" without pathspec used to forget all the saved + conflicts that relate to the current merge; it now requires you to + give it pathspecs. + + * "git rev-list --objects $revs -- $pathspec" now limits the objects listed + in its output properly with the pathspec, in preparation for narrow + clones. + + * "git push" with no parameters gives better advice messages when + "tracking" is used as the push.default semantics or there is no remote + configured yet. + + * A possible value to the "push.default" configuration variable, + 'tracking', gained a synonym that more naturally describes what it + does, 'upstream'. + + * "git rerere" learned a new subcommand "remaining" that is similar to + "status" and lists the paths that had conflicts which are known to + rerere, but excludes the paths that have already been marked as + resolved in the index from its output. "git mergetool" has been + updated to use this facility. + +Also contains various documentation updates. + + +Fixes since v1.7.4 +------------------ + +All of the fixes in the v1.7.4.X maintenance series are included in this +release, unless otherwise noted. + + * "git fetch" from a client that is mostly following the remote + needlessly told all of its refs to the server for both sides to + compute the set of objects that need to be transferred efficiently, + instead of stopping when the server heard enough. In a project with + many tags, this turns out to be extremely wasteful, especially over + the smart HTTP transport (sp/maint-{upload,fetch}-pack-stop-early~1). + + * "git fetch" run from a repository that uses the same repository as + its alternate object store as the repository it is fetching from + did not tell the server that it already has access to objects + reachable from the refs in their common alternate object store, + causing it to fetch unnecessary objects (jc/maint-fetch-alt). + + * "git remote add --mirror" created a configuration that is suitable for + doing both a mirror fetch and a mirror push at the same time, which + made little sense. We now warn and require the command line to specify + either --mirror=fetch or --mirror=push. diff --git a/Documentation/RelNotes/1.7.6.1.txt b/Documentation/RelNotes/1.7.6.1.txt new file mode 100644 index 0000000000..42e46ab17f --- /dev/null +++ b/Documentation/RelNotes/1.7.6.1.txt @@ -0,0 +1,63 @@ +Git v1.7.6.1 Release Notes +========================== + +Fixes since v1.7.6 +------------------ + + * Various codepaths that invoked zlib deflate/inflate assumed that these + functions can compress or uncompress more than 4GB data in one call on + platforms with 64-bit long, which has been corrected. + + * "git unexecutable" reported that "unexecutable" was not found, even + though the actual error was that "unexecutable" was found but did + not have a proper she-bang line to be executed. + + * Error exits from $PAGER were silently ignored. + + * "git checkout -b <branch>" was confused when attempting to create a + branch whose name ends with "-g" followed by hexadecimal digits, + and refused to work. + + * "git checkout -b <branch>" sometimes wrote a bogus reflog entry, + causing later "git checkout -" to fail. + + * "git diff --cc" learned to correctly ignore binary files. + + * "git diff -c/--cc" mishandled a deletion that resolves a conflict, and + looked in the working tree instead. + + * "git fast-export" forgot to quote pathnames with unsafe characters + in its output. + + * "git fetch" over smart-http transport used to abort when the + repository was updated between the initial connection and the + subsequent object transfer. + + * "git fetch" did not recurse into submodules in subdirectories. + + * "git ls-tree" did not error out when asked to show a corrupt tree. + + * "git pull" without any argument left an extra whitespace after the + command name in its reflog. + + * "git push --quiet" was not really quiet. + + * "git rebase -i -p" incorrectly dropped commits from side branches. + + * "git reset [<commit>] paths..." did not reset the index entry correctly + for unmerged paths. + + * "git submodule add" did not allow a relative repository path when + the superproject did not have any default remote url. + + * "git submodule foreach" failed to correctly give the standard input to + the user-supplied command it invoked. + + * submodules that the user has never showed interest in by running + "git submodule init" was incorrectly marked as interesting by "git + submodule sync". + + * "git submodule update --quiet" was not really quiet. + + * "git tag -l <glob>..." did not take multiple glob patterns from the + command line. diff --git a/Documentation/RelNotes/1.7.6.2.txt b/Documentation/RelNotes/1.7.6.2.txt new file mode 100644 index 0000000000..67ae414965 --- /dev/null +++ b/Documentation/RelNotes/1.7.6.2.txt @@ -0,0 +1,8 @@ +Git v1.7.6.2 Release Notes +========================== + +Fixes since v1.7.6.1 +-------------------- + + * v1.7.6.1 broke "git push --quiet"; it used to be a no-op against an old + version of Git running on the other end, but v1.7.6.1 made it abort. diff --git a/Documentation/RelNotes/1.7.6.3.txt b/Documentation/RelNotes/1.7.6.3.txt new file mode 100644 index 0000000000..95971831b9 --- /dev/null +++ b/Documentation/RelNotes/1.7.6.3.txt @@ -0,0 +1,24 @@ +Git v1.7.6.3 Release Notes +========================== + +Fixes since v1.7.6.2 +-------------------- + + * "git -c var=value subcmd" misparsed the custom configuration when + value contained an equal sign. + + * "git fetch" had a major performance regression, wasting many + needless cycles in a repository where there is no submodules + present. This was especially bad, when there were many refs. + + * "git reflog $refname" did not default to the "show" subcommand as + the documentation advertised the command to do. + + * "git reset" did not leave meaningful log message in the reflog. + + * "git status --ignored" did not show ignored items when there is no + untracked items. + + * "git tag --contains $commit" was unnecessarily inefficient. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.6.4.txt b/Documentation/RelNotes/1.7.6.4.txt new file mode 100644 index 0000000000..e19acac2da --- /dev/null +++ b/Documentation/RelNotes/1.7.6.4.txt @@ -0,0 +1,32 @@ +Git v1.7.6.4 Release Notes +========================== + +Fixes since v1.7.6.3 +-------------------- + + * The error reporting logic of "git am" when the command is fed a file + whose mail-storage format is unknown was fixed. + + * "git branch --set-upstream @{-1} foo" did not expand @{-1} correctly. + + * "git check-ref-format --print" used to parrot a candidate string that + began with a slash (e.g. /refs/heads/master) without stripping it, to make + the result a suitably normalized string the caller can append to "$GIT_DIR/". + + * "git clone" failed to clone locally from a ".git" file that itself + is not a directory but is a pointer to one. + + * "git clone" from a local repository that borrows from another + object store using a relative path in its objects/info/alternates + file did not adjust the alternates in the resulting repository. + + * "git describe --dirty" did not refresh the index before checking the + state of the working tree files. + + * "git ls-files ../$path" that is run from a subdirectory reported errors + incorrectly when there is no such path that matches the given pathspec. + + * "git mergetool" could loop forever prompting when nothing can be read + from the standard input. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.6.txt b/Documentation/RelNotes/1.7.6.txt new file mode 100644 index 0000000000..9ec498ea39 --- /dev/null +++ b/Documentation/RelNotes/1.7.6.txt @@ -0,0 +1,136 @@ +Git v1.7.6 Release Notes +======================== + +Updates since v1.7.5 +-------------------- + + * Various git-svn updates. + + * Updates the way content tags are handled in gitweb. Also adds + a UI to choose common timezone for displaying the dates. + + * Similar to branch names, tagnames that begin with "-" are now + disallowed. + + * Clean-up of the C part of i18n (but not l10n---please wait) + continues. + + * The scripting part of the codebase is getting prepared for i18n/l10n. + + * Pushing and pulling from a repository with large number of refs that + point to identical commits are optimized by not listing the same commit + during the common ancestor negotiation exchange with the other side. + + * Adding a file larger than core.bigfilethreshold (defaults to 1/2 Gig) + using "git add" will send the contents straight to a packfile without + having to hold it and its compressed representation both at the same + time in memory. + + * Processes spawned by "[alias] <name> = !process" in the configuration + can inspect GIT_PREFIX environment variable to learn where in the + working tree the original command was invoked. + + * A magic pathspec ":/" tells a command that limits its operation to + the current directory when ran from a subdirectory to work on the + entire working tree. In general, ":/path/to/file" would be relative + to the root of the working tree hierarchy. + + After "git reset --hard; edit Makefile; cd t/", "git add -u" would + be a no-op, but "git add -u :/" would add the updated contents of + the Makefile at the top level. If you want to name a path in the + current subdirectory whose unusual name begins with ":/", you can + name it by "./:/that/path" or by "\:/that/path". + + * "git blame" learned "--abbrev[=<n>]" option to control the minimum + number of hexdigits shown for commit object names. + + * "git blame" learned "--line-porcelain" that is less efficient but is + easier to parse. + + * Aborting "git commit --interactive" discards updates to the index + made during the interactive session. + + * "git commit" learned a "--patch" option to directly jump to the + per-hunk selection UI of the interactive mode. + + * "git diff" and its family of commands learned --dirstat=0 to show + directories that contribute less than 0.1% of changes. + + * "git diff" and its family of commands learned --dirstat=lines mode to + assess damage to the directory based on number of lines in the patch + output, not based on the similarity numbers. + + * "git format-patch" learned "--quiet" option to suppress the output of + the names of generated files. + + * "git format-patch" quotes people's names when it has RFC822 special + characters in it, e.g. "Junio C. Hamano" <jch@example.com>. Earlier + it was up to the user to do this when using its output. + + * "git format-patch" can take an empty --subject-prefix now. + + * "git grep" learned the "-P" option to take pcre regular expressions. + + * "git log" and friends learned a new "--notes" option to replace the + "--show-notes" option. Unlike "--show-notes", "--notes=<ref>" does + not imply showing the default notes. + + * They also learned a log.abbrevCommit configuration variable to augment + the --abbrev-commit command line option. + + * "git ls-remote" learned "--exit-code" option to consider it a + different kind of error when no remote ref to be shown. + + * "git merge" learned "-" as a short-hand for "the previous branch", just + like the way "git checkout -" works. + + * "git merge" uses "merge.ff" configuration variable to decide to always + create a merge commit (i.e. --no-ff, aka merge.ff=no), refuse to create + a merge commit (i.e. --ff-only, aka merge.ff=only). Setting merge.ff=yes + (or not setting it at all) restores the default behaviour of allowing + fast-forward to happen when possible. + + * p4-import (from contrib) learned a new option --preserve-user. + + * "git read-tree -m" learned "--dry-run" option that reports if a merge + would fail without touching the index nor the working tree. + + * "git rebase" that does not specify on top of which branch to rebase + the current branch now uses @{upstream} of the current branch. + + * "git rebase" finished either normally or with --abort did not + update the reflog for HEAD to record the event to come back to + where it started from. + + * "git remote add -t only-this-branch --mirror=fetch" is now allowed. Earlier + a fetch-mode mirror meant mirror everything, but now it only means refs are + not renamed. + + * "git rev-list --count" used with "--cherry-mark" counts the cherry-picked + commits separately, producing more a useful output. + + * "git submodule update" learned "--force" option to get rid of local + changes in submodules and replace them with the up-to-date version. + + * "git status" and friends ignore .gitmodules file while the file is + still in a conflicted state during a merge, to avoid using information + that is not final and possibly corrupt with conflict markers. + +Also contains various documentation updates and minor miscellaneous +changes. + + +Fixes since v1.7.5 +------------------ + +Unless otherwise noted, all the fixes in 1.7.5.X maintenance track are +included in this release. + + * "git config" used to choke with an insanely long line. + (merge ef/maint-strbuf-init later) + + * "git diff --quiet" did not work well with --diff-filter. + (merge jk/diff-not-so-quick later) + + * "git status -z" did not default to --porcelain output format. + (merge bc/maint-status-z-to-use-porcelain later) diff --git a/Documentation/RelNotes/1.7.7.1.txt b/Documentation/RelNotes/1.7.7.1.txt new file mode 100644 index 0000000000..ac9b838e25 --- /dev/null +++ b/Documentation/RelNotes/1.7.7.1.txt @@ -0,0 +1,60 @@ +Git v1.7.7.1 Release Notes +========================== + +Fixes since v1.7.7 +------------------ + + * On some BSD systems, adding +s bit on directories is detrimental + (it is not necessary on BSD to begin with). "git init --shared" + has been updated to take this into account without extra makefile + settings on platforms the Makefile knows about. + + * After incorrectly written third-party tools store a tag object in + HEAD, git diagnosed it as a repository corruption and refused to + proceed in order to avoid spreading the damage. We now gracefully + recover from such a situation by pretending as if the commit that + is pointed at by the tag were in HEAD. + + * "git apply --whitespace=error" did not bother to report the exact + line number in the patch that introduced new blank lines at the end + of the file. + + * "git apply --index" did not check corrupted patch. + + * "git checkout $tree $directory/" resurrected paths locally removed or + modified only in the working tree in $directory/ that did not appear + in $directory of the given $tree. They should have been kept intact. + + * "git diff $tree $path" used to apply the pathspec at the output stage, + reading the whole tree, wasting resources. + + * The code to check for updated submodules during a "git fetch" of the + superproject had an unnecessary quadratic loop. + + * "git fetch" from a large bundle did not enable the progress output. + + * When "git fsck --lost-and-found" found that an empty blob object in the + object store is unreachable, it incorrectly reported an error after + writing the lost blob out successfully. + + * "git filter-branch" did not refresh the index before checking that the + working tree was clean. + + * "git grep $tree" when run with multiple threads had an unsafe access to + the object database that should have been protected with mutex. + + * The "--ancestry-path" option to "git log" and friends misbehaved in a + history with complex criss-cross merges and showed an uninteresting + side history as well. + + * Test t1304 assumed LOGNAME is always set, which may not be true on + some systems. + + * Tests with --valgrind failed to find "mergetool" scriptlets. + + * "git patch-id" miscomputed the patch-id in a patch that has a line longer + than 1kB. + + * When an "exec" insn failed after modifying the index and/or the working + tree during "rebase -i", we now check and warn that the changes need to + be cleaned up. diff --git a/Documentation/RelNotes/1.7.7.2.txt b/Documentation/RelNotes/1.7.7.2.txt new file mode 100644 index 0000000000..e6bbef2f01 --- /dev/null +++ b/Documentation/RelNotes/1.7.7.2.txt @@ -0,0 +1,44 @@ +Git v1.7.7.2 Release Notes +========================== + +Fixes since v1.7.7.1 +-------------------- + + * We used to drop error messages from libcurl on certain kinds of + errors. + + * Error report from smart HTTP transport, when the connection was + broken in the middle of a transfer, showed a useless message on + a corrupt packet. + + * "git fetch --prune" was unsafe when used with refspecs from the + command line. + + * The attribute mechanism did not use case insensitive match when + core.ignorecase was set. + + * "git bisect" did not notice when it failed to update the working tree + to the next commit to be tested. + + * "git config --bool --get-regexp" failed to separate the variable name + and its value "true" when the variable is defined without "= true". + + * "git remote rename $a $b" were not careful to match the remote name + against $a (i.e. source side of the remote nickname). + + * "git mergetool" did not use its arguments as pathspec, but as a path to + the file that may not even have any conflict. + + * "git diff --[num]stat" used to use the number of lines of context + different from the default, potentially giving different results from + "git diff | diffstat" and confusing the users. + + * "git pull" and "git rebase" did not work well even when GIT_WORK_TREE is + set correctly with GIT_DIR if the current directory is outside the working + tree. + + * "git send-email" did not honor the configured hostname when restarting + the HELO/EHLO exchange after switching TLS on. + + * "gitweb" used to produce a non-working link while showing the contents + of a blob, when JavaScript actions are enabled. diff --git a/Documentation/RelNotes/1.7.7.3.txt b/Documentation/RelNotes/1.7.7.3.txt new file mode 100644 index 0000000000..09301f0957 --- /dev/null +++ b/Documentation/RelNotes/1.7.7.3.txt @@ -0,0 +1,19 @@ +Git v1.7.7.3 Release Notes +========================== + +Fixes since v1.7.7.2 +-------------------- + + * Adjust the "quick-install-doc" procedures as preformatted + html/manpage are no longer in the source repository. + + * The logic to optimize the locality of the data in a pack introduced in + 1.7.7 was grossly inefficient. + + * The logic to filter out forked projects in the project list in + "gitweb" was broken for some time. + + * "git branch -m/-M" advertised to update RENAME_REF ref in the + commit log message that introduced the feature but not anywhere in + the documentation, and never did update such a ref anyway. This + undocumented misfeature that did not exist has been excised. diff --git a/Documentation/RelNotes/1.7.7.4.txt b/Documentation/RelNotes/1.7.7.4.txt new file mode 100644 index 0000000000..e5234485e7 --- /dev/null +++ b/Documentation/RelNotes/1.7.7.4.txt @@ -0,0 +1,14 @@ +Git v1.7.7.4 Release Notes +========================== + +Fixes since v1.7.7.3 +-------------------- + + * A few header dependencies were missing from the Makefile. + + * Some newer parts of the code used C99 __VA_ARGS__ while we still + try to cater to older compilers. + + * "git name-rev --all" tried to name all _objects_, naturally failing to + describe many blobs and trees, instead of showing only commits as + advertised in its documentation. diff --git a/Documentation/RelNotes/1.7.7.txt b/Documentation/RelNotes/1.7.7.txt new file mode 100644 index 0000000000..7655cccfaa --- /dev/null +++ b/Documentation/RelNotes/1.7.7.txt @@ -0,0 +1,134 @@ +Git v1.7.7 Release Notes +======================== + +Updates since v1.7.6 +-------------------- + + * The scripting part of the codebase is getting prepared for i18n/l10n. + + * Interix, Cygwin and Minix ports got updated. + + * Various updates to git-p4 (in contrib/), fast-import, and git-svn. + + * Gitweb learned to read from /etc/gitweb-common.conf when it exists, + before reading from gitweb_config.perl or from /etc/gitweb.conf + (this last one is read only when per-repository gitweb_config.perl + does not exist). + + * Various codepaths that invoked zlib deflate/inflate assumed that these + functions can compress or uncompress more than 4GB data in one call on + platforms with 64-bit long, which has been corrected. + + * Git now recognizes loose objects written by other implementations that + use a non-standard window size for zlib deflation (e.g. Agit running on + Android with 4kb window). We used to reject anything that was not + deflated with 32kb window. + + * Interaction between the use of pager and coloring of the output has + been improved, especially when a command that is not built-in was + involved. + + * "git am" learned to pass the "--exclude=<path>" option through to underlying + "git apply". + + * You can now feed many empty lines before feeding an mbox file to + "git am". + + * "git archive" can be told to pass the output to gzip compression and + produce "archive.tar.gz". + + * "git bisect" can be used in a bare repository (provided that the test + you perform per each iteration does not need a working tree, of + course). + + * The length of abbreviated object names in "git branch -v" output + now honors the core.abbrev configuration variable. + + * "git check-attr" can take relative paths from the command line. + + * "git check-attr" learned an "--all" option to list the attributes for a + given path. + + * "git checkout" (both the code to update the files upon checking out a + different branch and the code to checkout a specific set of files) learned + to stream the data from object store when possible, without having to + read the entire contents of a file into memory first. An earlier round + of this code that is not in any released version had a large leak but + now it has been plugged. + + * "git clone" can now take a "--config key=value" option to set the + repository configuration options that affect the initial checkout. + + * "git commit <paths>..." now lets you feed relative pathspecs that + refer to outside your current subdirectory. + + * "git diff --stat" learned a --stat-count option to limit the output of + a diffstat report. + + * "git diff" learned a "--histogram" option to use a different diff + generation machinery stolen from jgit, which might give better + performance. + + * "git diff" had a weird worst case behaviour that can be triggered + when comparing files with potentially many places that could match. + + * "git fetch", "git push" and friends no longer show connection + errors for addresses that couldn't be connected to when at least one + address succeeds (this is arguably a regression but a deliberate + one). + + * "git grep" learned "--break" and "--heading" options, to let users mimic + the output format of "ack". + + * "git grep" learned a "-W" option that shows wider context using the same + logic used by "git diff" to determine the hunk header. + + * Invoking the low-level "git http-fetch" without "-a" option (which + git itself never did---normal users should not have to worry about + this) is now deprecated. + + * The "--decorate" option to "git log" and its family learned to + highlight grafted and replaced commits. + + * "git rebase master topci" no longer spews usage hints after giving + the "fatal: no such branch: topci" error message. + + * The recursive merge strategy implementation got a fairly large + fix for many corner cases that may rarely happen in real world + projects (it has been verified that none of the 16000+ merges in + the Linux kernel history back to v2.6.12 is affected with the + corner case bugs this update fixes). + + * "git stash" learned an "--include-untracked option". + + * "git submodule update" used to stop at the first error updating a + submodule; it now goes on to update other submodules that can be + updated, and reports the ones with errors at the end. + + * "git push" can be told with the "--recurse-submodules=check" option to + refuse pushing of the supermodule, if any of its submodules' + commits hasn't been pushed out to their remotes. + + * "git upload-pack" and "git receive-pack" learned to pretend that only a + subset of the refs exist in a repository. This may help a site to + put many tiny repositories into one repository (this would not be + useful for larger repositories as repacking would be problematic). + + * "git verify-pack" has been rewritten to use the "index-pack" machinery + that is more efficient in reading objects in packfiles. + + * test scripts for gitweb tried to run even when CGI-related perl modules + are not installed; they now exit early when the latter are unavailable. + +Also contains various documentation updates and minor miscellaneous +changes. + + +Fixes since v1.7.6 +------------------ + +Unless otherwise noted, all fixes in the 1.7.6.X maintenance track are +included in this release. + + * "git branch -m" and "git checkout -b" incorrectly allowed the tip + of the branch that is currently checked out updated. diff --git a/Documentation/RelNotes/1.7.8.txt b/Documentation/RelNotes/1.7.8.txt new file mode 100644 index 0000000000..b4d90bba0f --- /dev/null +++ b/Documentation/RelNotes/1.7.8.txt @@ -0,0 +1,161 @@ +Git v1.7.8 Release Notes +======================== + +Updates since v1.7.7 +-------------------- + + * Some git-svn, git-gui, git-p4 (in contrib) and msysgit updates. + + * Updates to bash completion scripts. + + * The build procedure has been taught to take advantage of computed + dependency automatically when the complier supports it. + + * The date parser now accepts timezone designators that lack minutes + part and also has a colon between "hh:mm". + + * The contents of the /etc/mailname file, if exists, is used as the + default value of the hostname part of the committer/author e-mail. + + * "git am" learned how to read from patches generated by Hg. + + * "git archive" talking with a remote repository can report errors + from the remote side in a more informative way. + + * "git branch" learned an explicit --list option to ask for branches + listed, optionally with a glob matching pattern to limit its output. + + * "git check-attr" learned "--cached" option to look at .gitattributes + files from the index, not from the working tree. + + * Variants of "git cherry-pick" and "git revert" that take multiple + commits learned to "--continue" and "--abort". + + * "git daemon" gives more human readble error messages to clients + using ERR packets when appropriate. + + * Errors at the network layer is logged by "git daemon". + + * "git diff" learned "--minimal" option to spend extra cycles to come + up with a minimal patch output. + + * "git diff" learned "--function-context" option to show the whole + function as context that was affected by a change. + + * "git difftool" can be told to skip launching the tool for a path by + answering 'n' to its prompt. + + * "git fetch" learned to honor transfer.fsckobjects configuration to + validate the objects that were received from the other end, just like + "git receive-pack" (the receiving end of "git push") does. + + * "git fetch" makes sure that the set of objects it received from the + other end actually completes the history before updating the refs. + "git receive-pack" (the receiving end of "git push") learned to do the + same. + + * "git fetch" learned that fetching/cloning from a regular file on the + filesystem is not necessarily a request to unpack a bundle file; the + file could be ".git" with "gitdir: <path>" in it. + + * "git for-each-ref" learned "%(contents:subject)", "%(contents:body)" + and "%(contents:signature)". The last one is useful for signed tags. + + * "git grep" used to incorrectly pay attention to .gitignore files + scattered in the directory it was working in even when "--no-index" + option was used. It no longer does this. The "--exclude-standard" + option needs to be given to explicitly activate the ignore + mechanism. + + * "git grep" learned "--untracked" option, where given patterns are + searched in untracked (but not ignored) files as well as tracked + files in the working tree, so that matches in new but not yet + added files do not get missed. + + * The recursive merge backend no longer looks for meaningless + existing merges in submodules unless in the outermost merge. + + * "git log" and friends learned "--children" option. + + * "git ls-remote" learned to respond to "-h"(elp) requests. + + * "mediawiki" remote helper can interact with (surprise!) MediaWiki + with "git fetch" & "git push". + + * "git merge" learned the "--edit" option to allow users to edit the + merge commit log message. + + * "git rebase -i" can be told to use special purpose editor suitable + only for its insn sheet via sequence.editor configuration variable. + + * "git send-email" learned to respond to "-h"(elp) requests. + + * "git send-email" allows the value given to sendemail.aliasfile to begin + with "~/" to refer to the $HOME directory. + + * "git send-email" forces use of Authen::SASL::Perl to work around + issues between Authen::SASL::Cyrus and AUTH PLAIN/LOGIN. + + * "git stash" learned "--include-untracked" option to stash away + untracked/ignored cruft from the working tree. + + * "git submodule clone" does not leak an error message to the UI + level unnecessarily anymore. + + * "git submodule update" learned to honor "none" as the value for + submodule.<name>.update to specify that the named submodule should + not be checked out by default. + + * When populating a new submodule directory with "git submodule init", + the $GIT_DIR metainformation directory for submodules is created inside + $GIT_DIR/modules/<name>/ directory of the superproject and referenced + via the gitfile mechanism. This is to make it possible to switch + between commits in the superproject that has and does not have the + submodule in the tree without re-cloning. + + * "gitweb" leaked unescaped control characters from syntax hiliter + outputs. + + * "gitweb" can be told to give custom string at the end of the HTML + HEAD element. + + * "gitweb" now has its own manual pages. + + +Also contains other documentation updates and minor code cleanups. + + +Fixes since v1.7.7 +------------------ + +Unless otherwise noted, all fixes in the 1.7.7.X maintenance track are +included in this release. + + * HTTP transport did not use pushurl correctly, and also did not tell + what host it is trying to authenticate with when asking for + credentials. + (merge deba493 jk/http-auth later to maint). + + * "git blame" was aborted if started from an uncommitted content and + the path had the textconv filter in effect. + (merge 8518088 ss/blame-textconv-fake-working-tree later to maint). + + * Adding many refs to the local repository in one go (e.g. "git fetch" + that fetches many tags) and looking up a ref by name in a repository + with too many refs were unnecessarily slow. + (merge 17d68a54d jp/get-ref-dir-unsorted later to maint). + + * Report from "git commit" on untracked files was confused under + core.ignorecase option. + (merge 395c7356 jk/name-hash-dirent later to maint). + + * "git merge" did not understand ":/<pattern>" as a way to name a commit. + + " "git push" on the receiving end used to call post-receive and post-update + hooks for attempted removal of non-existing refs. + (merge 160b81ed ph/push-to-delete-nothing later to maint). + + * Help text for "git remote set-url" and "git remote set-branches" + were misspelled. + (merge c49904e fc/remote-seturl-usage-fix later to maint). + (merge 656cdf0 jc/remote-setbranches-usage-fix later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index ece3c77482..0dbf2c9843 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -10,10 +10,18 @@ Checklist (and a short version for the impatient): description (50 characters is the soft limit, see DISCUSSION in git-commit(1)), and should skip the full stop - the body should provide a meaningful commit message, which: - - uses the imperative, present tense: "change", - not "changed" or "changes". - - includes motivation for the change, and contrasts - its implementation with previous behaviour + . explains the problem the change tries to solve, iow, what + is wrong with the current code without the change. + . justifies the way the change solves the problem, iow, why + the result with the change is better. + . alternate solutions considered but discarded, if any. + - describe changes in imperative mood, e.g. "make xyzzy do frotz" + instead of "[This patch] makes xyzzy do frotz" or "[I] changed + xyzzy to do frotz", as if you are giving orders to the codebase + to change its behaviour. + - try to make sure your explanation can be understood without + external resources. Instead of giving a URL to a mailing list + archive, summarize the relevant points of the discussion. - add a "Signed-off-by: Your Name <you@example.com>" line to the commit message (or just use the option "-s" when committing) to confirm that you agree to the Developer's Certificate of Origin @@ -90,7 +98,10 @@ your commit head. Instead, always make a commit with complete commit message and generate a series of patches from your repository. It is a good discipline. -Describe the technical detail of the change(s). +Give an explanation for the change(s) that is detailed enough so +that people can judge if it is good thing to do, without reading +the actual patch text to determine how well the code does what +the explanation promises to do. If your description starts to get too long, that's a sign that you probably need to split up your commit to finer grained pieces. @@ -99,9 +110,8 @@ help reviewers check the patch, and future maintainers understand the code, are the most beautiful patches. Descriptions that summarise the point in the subject well, and describe the motivation for the change, the approach taken by the change, and if relevant how this -differs substantially from the prior version, can be found on Usenet -archives back into the late 80's. Consider it like good Netiquette, -but for code. +differs substantially from the prior version, are all good things +to have. Oh, another thing. I am picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped @@ -124,8 +134,7 @@ Another thing: NULL pointers shall be written as NULL, not as 0. (2) Generate your patch using git tools out of your commits. -git based diff tools (git, Cogito, and StGIT included) generate -unidiff which is the preferred format. +git based diff tools generate unidiff which is the preferred format. You do not have to be afraid to use -M option to "git diff" or "git format-patch", if your patch involves file renames. The @@ -264,12 +273,21 @@ the change to its true author (see (2) above). Also notice that a real name is used in the Signed-off-by: line. Please don't hide your real name. -Some people also put extra tags at the end. +If you like, you can put extra tags at the end: -"Acked-by:" says that the patch was reviewed by the person who -is more familiar with the issues and the area the patch attempts -to modify. "Tested-by:" says the patch was tested by the person -and found to have the desired effect. +1. "Reported-by:" is used to credit someone who found the bug that + the patch attempts to fix. +2. "Acked-by:" says that the person who is more familiar with the area + the patch attempts to modify liked the patch. +3. "Reviewed-by:", unlike the other tags, can only be offered by the + reviewer and means that she is completely satisfied that the patch + is ready for application. It is usually offered only after a + detailed review. +4. "Tested-by:" is used to indicate that the person applied the patch + and found it to have the desired effect. + +You can also create your own tag or use one that's in common usage +such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". ------------------------------------------------ An ideal patch flow @@ -325,50 +343,20 @@ MUA specific hints Some of patches I receive or pick up from the list share common patterns of breakage. Please make sure your MUA is set up -properly not to corrupt whitespaces. Here are two common ones -I have seen: - -* Empty context lines that do not have _any_ whitespace. - -* Non empty context lines that have one extra whitespace at the - beginning. - -One test you could do yourself if your MUA is set up correctly is: - -* Send the patch to yourself, exactly the way you would, except - To: and Cc: lines, which would not contain the list and - maintainer address. - -* Save that patch to a file in UNIX mailbox format. Call it say - a.patch. - -* Try to apply to the tip of the "master" branch from the - git.git public repository: +properly not to corrupt whitespaces. - $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply - $ git checkout test-apply - $ git reset --hard - $ git am a.patch +See the DISCUSSION section of git-format-patch(1) for hints on +checking your patch by mailing it to yourself and applying with +git-am(1). -If it does not apply correctly, there can be various reasons. - -* Your patch itself does not apply cleanly. That is _bad_ but - does not have much to do with your MUA. Please rebase the - patch appropriately. - -* Your MUA corrupted your patch; "am" would complain that - the patch does not apply. Look at .git/rebase-apply/ subdirectory and - see what 'patch' file contains and check for the common - corruption patterns mentioned above. - -* While you are at it, check what are in 'info' and - 'final-commit' files as well. If what is in 'final-commit' is - not exactly what you would want to see in the commit log - message, it is very likely that your maintainer would end up - hand editing the log message when he applies your patch. - Things like "Hi, this is my first patch.\n", if you really - want to put in the patch e-mail, should come after the - three-dash line that signals the end of the commit message. +While you are at it, check the resulting commit log message from +a trial run of applying the patch. If what is in the resulting +commit is not exactly what you would want to see, it is very +likely that your maintainer would end up hand editing the log +message when he applies your patch. Things like "Hi, this is my +first patch.\n", if you really want to put in the patch e-mail, +should come after the three-dash line that signals the end of the +commit message. Pine @@ -424,89 +412,10 @@ that or Gentoo did it.) So you need to set the it. -Thunderbird ------------ - -(A Large Angry SCM) - -By default, Thunderbird will both wrap emails as well as flag them as -being 'format=flowed', both of which will make the resulting email unusable -by git. - -Here are some hints on how to successfully submit patches inline using -Thunderbird. - -There are two different approaches. One approach is to configure -Thunderbird to not mangle patches. The second approach is to use -an external editor to keep Thunderbird from mangling the patches. - -Approach #1 (configuration): - -This recipe is current as of Thunderbird 2.0.0.19. Three steps: - 1. Configure your mail server composition as plain text - Edit...Account Settings...Composition & Addressing, - uncheck 'Compose Messages in HTML'. - 2. Configure your general composition window to not wrap - Edit..Preferences..Composition, wrap plain text messages at 0 - 3. Disable the use of format=flowed - Edit..Preferences..Advanced..Config Editor. Search for: - mailnews.send_plaintext_flowed - toggle it to make sure it is set to 'false'. - -After that is done, you should be able to compose email as you -otherwise would (cut + paste, git-format-patch | git-imap-send, etc), -and the patches should not be mangled. - -Approach #2 (external editor): - -This recipe appears to work with the current [*1*] Thunderbird from Suse. - -The following Thunderbird extensions are needed: - AboutConfig 0.5 - http://aboutconfig.mozdev.org/ - External Editor 0.7.2 - http://globs.org/articles.php?lng=en&pg=8 - -1) Prepare the patch as a text file using your method of choice. - -2) Before opening a compose window, use Edit->Account Settings to -uncheck the "Compose messages in HTML format" setting in the -"Composition & Addressing" panel of the account to be used to send the -patch. [*2*] - -3) In the main Thunderbird window, _before_ you open the compose window -for the patch, use Tools->about:config to set the following to the -indicated values: - mailnews.send_plaintext_flowed => false - mailnews.wraplength => 0 - -4) Open a compose window and click the external editor icon. - -5) In the external editor window, read in the patch file and exit the -editor normally. - -6) Back in the compose window: Add whatever other text you wish to the -message, complete the addressing and subject fields, and press send. - -7) Optionally, undo the about:config/account settings changes made in -steps 2 & 3. +Thunderbird, KMail, GMail +------------------------- - -[Footnotes] -*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse -9.3 professional updates. - -*2* It may be possible to do this with about:config and the following -settings but I haven't tried, yet. - mail.html_compose => false - mail.identity.default.compose_html => false - mail.identity.id?.compose_html => false - -(Lukas Sandström) - -There is a script in contrib/thunderbird-patch-inline which can help -you include patches with Thunderbird in an easy way. To use it, do the -steps above and then use the script as the external editor. +See the MUA-SPECIFIC HINTS section of git-format-patch(1). Gnus ---- @@ -521,72 +430,3 @@ characters (most notably in people's names), and also whitespaces (fatal in patches). Running 'C-u g' to display the message in raw form before using '|' to run the pipe can work this problem around. - - -KMail ------ - -This should help you to submit patches inline using KMail. - -1) Prepare the patch as a text file. - -2) Click on New Mail. - -3) Go under "Options" in the Composer window and be sure that -"Word wrap" is not set. - -4) Use Message -> Insert file... and insert the patch. - -5) Back in the compose window: add whatever other text you wish to the -message, complete the addressing and subject fields, and press send. - - -Gmail ------ - -GMail does not appear to have any way to turn off line wrapping in the web -interface, so this will mangle any emails that you send. You can however -use "git send-email" and send your patches through the GMail SMTP server, or -use any IMAP email client to connect to the google IMAP server and forward -the emails through that. - -To use "git send-email" and send your patches through the GMail SMTP server, -edit ~/.gitconfig to specify your account settings: - -[sendemail] - smtpencryption = tls - smtpserver = smtp.gmail.com - smtpuser = user@gmail.com - smtppass = p4ssw0rd - smtpserverport = 587 - -Once your commits are ready to be sent to the mailing list, run the -following commands: - - $ git format-patch --cover-letter -M origin/master -o outgoing/ - $ edit outgoing/0000-* - $ git send-email outgoing/* - -To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your -account settings: - -[imap] - folder = "[Gmail]/Drafts" - host = imaps://imap.gmail.com - user = user@gmail.com - pass = p4ssw0rd - port = 993 - sslverify = false - -You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error -that the "Folder doesn't exist". - -Once your commits are ready to be sent to the mailing list, run the -following commands: - - $ git format-patch --cover-letter -M --stdout origin/master | git imap-send - -Just make sure to disable line wrapping in the email client (GMail web -interface will line wrap no matter what, so you need to use a real -IMAP client). - diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 16e3c68576..d4a51da464 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -52,6 +52,11 @@ of lines before or after the line given by <start>. --porcelain:: Show in a format designed for machine consumption. +--line-porcelain:: + Show the porcelain format, but output commit information for + each line, not just the first time a commit is referenced. + Implies --porcelain. + --incremental:: Show the result incrementally in a format designed for machine consumption. @@ -112,5 +117,4 @@ commit. And the default value is 40. If there are more than one take effect. -h:: ---help:: Show help message. diff --git a/Documentation/config.txt b/Documentation/config.txt index d82c0da2cf..5a841da6d4 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -45,9 +45,10 @@ lines. Variables may belong directly to a section or to a given subsection. You can have `[section]` if you have `[section "subsection"]`, but you don't need to. -There is also a case insensitive alternative `[section.subsection]` syntax. -In this syntax, subsection names follow the same restrictions as for section -names. +There is also a deprecated `[section.subsection]` syntax. With this +syntax, the subsection name is converted to lower-case and is also +compared case sensitively. These subsection names follow the same +restrictions as section names. All the other lines (and the remainder of the line after the section header) are recognized as setting variables, in the form @@ -62,7 +63,7 @@ Internal whitespace within a variable value is retained verbatim. The values following the equals sign in variable assign are all either a string, an integer, or a boolean. Boolean values may be given as yes/no, -0/1, true/false or on/off. Case is not significant in boolean values, when +1/0, true/false or on/off. Case is not significant in boolean values, when converting value to the canonical form using '--bool' type specifier; 'git config' will ensure that the output is "true" or "false". @@ -147,7 +148,7 @@ advice.*:: core.fileMode:: If false, the executable bit differences between the index and - the working copy are ignored; useful on broken filesystems like FAT. + the working tree are ignored; useful on broken filesystems like FAT. See linkgit:git-update-index[1]. + The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] @@ -179,7 +180,7 @@ is created. core.trustctime:: If false, the ctime differences between the index and the - working copy are ignored; useful when the inode change time + working tree are ignored; useful when the inode change time is regularly modified by something outside Git (file system crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. @@ -292,7 +293,7 @@ core.ignoreStat:: If true, commands which modify both the working tree and the index will mark the updated paths with the "assume unchanged" bit in the index. These marked files are then assumed to stay unchanged in the - working copy, until you mark them otherwise manually - Git will not + working tree, until you mark them otherwise manually - Git will not detect the file changes by lstat() calls. This is useful on systems where those are very slow, such as Microsoft Windows. See linkgit:git-update-index[1]. @@ -317,24 +318,26 @@ false), while all other repositories are assumed to be bare (bare = true). core.worktree:: - Set the path to the root of the work tree. + Set the path to the root of the working tree. This can be overridden by the GIT_WORK_TREE environment - variable and the '--work-tree' command line option. It can be - an absolute path or a relative path to the .git directory, - either specified by --git-dir or GIT_DIR, or automatically - discovered. - If --git-dir or GIT_DIR are specified but none of + variable and the '--work-tree' command line option. + The value can be an absolute path or relative to the path to + the .git directory, which is either specified by --git-dir + or GIT_DIR, or automatically discovered. + If --git-dir or GIT_DIR is specified but none of --work-tree, GIT_WORK_TREE and core.worktree is specified, - the current working directory is regarded as the root of the - work tree. + the current working directory is regarded as the top level + of your working tree. + Note that this variable is honored even when set in a configuration -file in a ".git" subdirectory of a directory, and its value differs +file in a ".git" subdirectory of a directory and its value differs from the latter directory (e.g. "/path/to/.git/config" has core.worktree set to "/different/path"), which is most likely a -misconfiguration. Running git commands in "/path/to" directory will +misconfiguration. Running git commands in the "/path/to" directory will still use "/different/path" as the root of the work tree and can cause -great confusion to the users. +confusion unless you know what you are doing (e.g. you are creating a +read-only snapshot of the same index to a location different from the +repository's usual working tree). core.logAllRefUpdates:: Enable the reflog. Updates to a ref <ref> is logged to the file @@ -342,7 +345,9 @@ core.logAllRefUpdates:: SHA1, the date/time and the reason of the update, but only when the file exists. If this configuration variable is set to true, missing "$GIT_DIR/logs/<ref>" - file is automatically created for branch heads. + file is automatically created for branch heads (i.e. under + refs/heads/), remote refs (i.e. under refs/remotes/), + note refs (i.e. under refs/notes/), and the symbolic ref HEAD. + This information can be used to determine what commit was the tip of a branch "2 days ago". @@ -440,8 +445,6 @@ for most projects as source code and other text files can still be delta compressed, but larger binary media files won't be. + Common unit suffixes of 'k', 'm', or 'g' are supported. -+ -Currently only linkgit:git-fast-import[1] honors this setting. core.excludesfile:: In addition to '.gitignore' (per-directory) and @@ -459,12 +462,24 @@ core.askpass:: prompt. The external program shall be given a suitable prompt as command line argument and write the password on its STDOUT. +core.attributesfile:: + In addition to '.gitattributes' (per-directory) and + '.git/info/attributes', git looks into this file for attributes + (see linkgit:gitattributes[5]). Path expansions are made the same + way as for `core.excludesfile`. + core.editor:: Commands such as `commit` and `tag` that lets you edit messages by launching an editor uses the value of this variable when it is set, and the environment variable `GIT_EDITOR` is not set. See linkgit:git-var[1]. +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase insn file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. + core.pager:: The command that git will use to paginate output. Can be overridden with the `GIT_PAGER` environment @@ -507,6 +522,9 @@ core.whitespace:: part of the line terminator, i.e. with it, `trailing-space` does not trigger if the character before such a carriage-return is not a whitespace (not enabled by default). +* `tabwidth=<n>` tells how many character positions a tab occupies; this + is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent` + errors. The default tab width is 8. Allowed values are 1 to 63. core.fsyncobjectfiles:: This boolean will enable 'fsync()' when writing object files. @@ -547,10 +565,20 @@ core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in linkgit:git-read-tree[1] for more information. +core.abbrev:: + Set the length object names are abbreviated to. If unspecified, + many commands abbreviate to 7 hexdigits, which may not be enough + for abbreviated object names to stay unique for sufficiently long + time. + add.ignore-errors:: +add.ignoreErrors:: Tells 'git add' to continue adding files when some files cannot be added due to indexing errors. Equivalent to the '--ignore-errors' - option of linkgit:git-add[1]. + option of linkgit:git-add[1]. Older versions of git accept only + `add.ignore-errors`, which does not follow the usual naming + convention for configuration variables. Newer versions of git + honor `add.ignoreErrors` as well. alias.*:: Command aliases for the linkgit:git[1] command wrapper - e.g. @@ -568,6 +596,8 @@ it will be treated as a shell command. For example, defining "gitk --all --not ORIG_HEAD". Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. +'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' +from the original current directory. See linkgit:git-rev-parse[1]. am.keepcr:: If true, git-am will call git-mailsplit for patches in mbox format @@ -595,8 +625,9 @@ branch.autosetupmerge:: this behavior can be chosen per-branch using the `--track` and `--no-track` options. The valid settings are: `false` -- no automatic setup is done; `true` -- automatic setup is done when the - starting point is a remote branch; `always` -- automatic setup is - done when the starting point is either a local branch or remote + starting point is a remote-tracking branch; `always` -- + automatic setup is done when the starting point is either a + local branch or remote-tracking branch. This option defaults to true. branch.autosetuprebase:: @@ -607,7 +638,7 @@ branch.autosetuprebase:: When `local`, rebase is set to true for tracked branches of other local branches. When `remote`, rebase is set to true for tracked branches of - remote branches. + remote-tracking branches. When `always`, rebase will be set to true for all tracking branches. See "branch.autosetupmerge" for details on how to set up a @@ -621,7 +652,7 @@ branch.<name>.remote:: branch.<name>.merge:: Defines, together with branch.<name>.remote, the upstream branch - for the given branch. It tells 'git fetch'/'git pull' which + for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which branch to merge and can also affect 'git push' (see push.default). When in branch <name>, it tells 'git fetch' the default refspec to be marked for merging in FETCH_HEAD. The value is @@ -654,7 +685,7 @@ branch.<name>.rebase:: browser.<tool>.cmd:: Specify the command to invoke the specified browser. The specified command is evaluated in shell with the URLs passed - as arguments. (See linkgit:git-web--browse[1].) + as arguments. (See linkgit:git-web{litdd}browse[1].) browser.<tool>.path:: Override the path for the given tool that may be used to @@ -674,7 +705,7 @@ color.branch:: color.branch.<slot>:: Use customized color for branch coloration. `<slot>` is one of `current` (the current branch), `local` (a local branch), - `remote` (a tracking branch in refs/remotes/), `plain` (other + `remote` (a remote-tracking branch in refs/remotes/), `plain` (other refs). + The value for these configuration variables is a list of colors (at most @@ -686,9 +717,16 @@ second is the background. The position of the attribute, if any, doesn't matter. color.diff:: - When set to `always`, always use colors in patch. - When false (or `never`), never. When set to `true` or `auto`, use - colors only when the output is to the terminal. Defaults to false. + Whether to use ANSI escape sequences to add color to patches. + If this is set to `always`, linkgit:git-diff[1], + linkgit:git-log[1], and linkgit:git-show[1] will use color + for all patches. If it is set to `true` or `auto`, those + commands will only use color when output is to the terminal. + Defaults to false. ++ +This does not affect linkgit:git-format-patch[1] nor the +'git-diff-{asterisk}' plumbing commands. Can be overridden on the +command line with the `--color[=<when>]` option. color.diff.<slot>:: Use customized color for diff colorization. `<slot>` specifies @@ -702,7 +740,7 @@ color.diff.<slot>:: color.decorate.<slot>:: Use customized color for 'git log --decorate' output. `<slot>` is one of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local - branches, remote tracking branches, tags, stash and HEAD, respectively. + branches, remote-tracking branches, tags, stash and HEAD, respectively. color.grep:: When set to `always`, always highlight matches. When `false` (or @@ -767,17 +805,22 @@ color.status.<slot>:: one of `header` (the header text of the status message), `added` or `updated` (files which are added but not committed), `changed` (files which are changed but not added in the index), - `untracked` (files which are not tracked by git), or + `untracked` (files which are not tracked by git), + `branch` (the current branch), or `nobranch` (the color the 'no branch' warning is shown in, defaulting to red). The values of these variables may be specified as in color.branch.<slot>. color.ui:: - When set to `always`, always use colors in all git commands which - are capable of colored output. When false (or `never`), never. When - set to `true` or `auto`, use colors only when the output is to the - terminal. When more specific variables of color.* are set, they always - take precedence over this setting. Defaults to false. + This variable determines the default value for variables such + as `color.diff` and `color.grep` that control the use of color + per command family. Its scope will expand as more commands learn + configuration to set a default for the `--color` option. Set it + to `always` if you want all output not intended for machine + consumption to use color, to `true` or `auto` if you want such + output to use color when written to the terminal, or to `false` or + `never` if you prefer git commands not to use color unless enabled + explicitly with some other configuration or the `--color` option. commit.status:: A boolean to enable/disable inclusion of status information in the @@ -789,68 +832,7 @@ commit.template:: "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the specified user's home directory. -diff.autorefreshindex:: - When using 'git diff' to compare with work tree - files, do not consider stat-only change as changed. - Instead, silently run `git update-index --refresh` to - update the cached stat information for paths whose - contents in the work tree match the contents in the - index. This option defaults to true. Note that this - affects only 'git diff' Porcelain, and not lower level - 'diff' commands such as 'git diff-files'. - -diff.external:: - If this config variable is set, diff generation is not - performed using the internal diff machinery, but using the - given command. Can be overridden with the `GIT_EXTERNAL_DIFF' - environment variable. The command is called with parameters - as described under "git Diffs" in linkgit:git[1]. Note: if - you want to use an external diff program only on a subset of - your files, you might want to use linkgit:gitattributes[5] instead. - -diff.mnemonicprefix:: - If set, 'git diff' uses a prefix pair that is different from the - standard "a/" and "b/" depending on what is being compared. When - this configuration is in effect, reverse diff output also swaps - the order of the prefixes: -`git diff`;; - compares the (i)ndex and the (w)ork tree; -`git diff HEAD`;; - compares a (c)ommit and the (w)ork tree; -`git diff --cached`;; - compares a (c)ommit and the (i)ndex; -`git diff HEAD:file1 file2`;; - compares an (o)bject and a (w)ork tree entity; -`git diff --no-index a b`;; - compares two non-git things (1) and (2). - -diff.noprefix:: - If set, 'git diff' does not show any source or destination prefix. - -diff.renameLimit:: - The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option '-l'. - -diff.renames:: - Tells git to detect renames. If set to any boolean value, it - will enable basic rename detection. If set to "copies" or - "copy", it will detect copies, as well. - -diff.ignoreSubmodules:: - Sets the default value of --ignore-submodules. Note that this - affects only 'git diff' Porcelain, and not lower level 'diff' - commands such as 'git diff-files'. 'git checkout' also honors - this setting when reporting uncommitted changes. - -diff.suppressBlankEmpty:: - A boolean to inhibit the standard behavior of printing a space - before each empty output line. Defaults to false. - -diff.tool:: - Controls which diff tool is used. `diff.tool` overrides - `merge.tool` when used by linkgit:git-difftool[1] and has - the same valid values as `merge.tool` minus "tortoisemerge" - and plus "kompare". +include::diff-config.txt[] difftool.<tool>.path:: Override the path for the given tool. This is useful in case @@ -873,6 +855,22 @@ diff.wordRegex:: sequences that match the regular expression are "words", all other characters are *ignorable* whitespace. +fetch.recurseSubmodules:: + This option can be either set to a boolean value or to 'on-demand'. + Setting it to a boolean changes the behavior of fetch and pull to + unconditionally recurse into submodules when set to true or to not + recurse at all when set to false. When set to 'on-demand' (the default + value), fetch and pull will only recurse into a populated submodule + when its superproject retrieves a commit that updates the submodule's + reference. + +fetch.fsckObjects:: + If it is set to true, git-fetch-pack will check all fetched + objects. It will abort in the case of a malformed object or a + broken link. The result of an abort are only dangling objects. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. + fetch.unpackLimit:: If the number of objects fetched over the git native transfer is below this @@ -945,6 +943,16 @@ format.signoff:: the rights to submit this work under the same open source license. Please see the 'SubmittingPatches' document for further discussion. +filter.<driver>.clean:: + The command which is used to convert the content of a worktree + file to a blob upon checkin. See linkgit:gitattributes[5] for + details. + +filter.<driver>.smudge:: + The command which is used to convert the content of a blob + object to a worktree file upon checkout. See + linkgit:gitattributes[5] for details. + gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults @@ -967,7 +975,7 @@ gc.packrefs:: Running `git pack-refs` in a repository renders it unclonable by Git versions prior to 1.5.1.2 over dumb transports such as HTTP. This variable determines whether - 'git gc' runs `git pack-refs`. This can be set to `nobare` + 'git gc' runs `git pack-refs`. This can be set to `notbare` to enable it within all non-bare repos or it can be set to a boolean value. The default is `true`. @@ -1070,6 +1078,29 @@ All gitcvs variables except for 'gitcvs.usecrlfattr' and is one of "ext" and "pserver") to make them apply only for the given access method. +gitweb.category:: +gitweb.description:: +gitweb.owner:: +gitweb.url:: + See linkgit:gitweb[1] for description. + +gitweb.avatar:: +gitweb.blame:: +gitweb.grep:: +gitweb.highlight:: +gitweb.patches:: +gitweb.pickaxe:: +gitweb.remote_heads:: +gitweb.showsizes:: +gitweb.snapshot:: + See linkgit:gitweb.conf[5] for description. + +grep.lineNumber:: + If set to true, enable '-n' option by default. + +grep.extendedRegexp:: + If set to true, enable '--extended-regexp' option by default. + gui.commitmsgwidth:: Defines how wide the commit message window is in the linkgit:git-gui[1]. "75" is the default. @@ -1096,7 +1127,7 @@ gui.newbranchtemplate:: linkgit:git-gui[1]. gui.pruneduringfetch:: - "true" if linkgit:git-gui[1] should prune tracking branches when + "true" if linkgit:git-gui[1] should prune remote-tracking branches when performing a fetch. The default value is "false". gui.trustmtime:: @@ -1198,6 +1229,14 @@ http.proxy:: environment variable (see linkgit:curl[1]). This can be overridden on a per-remote basis; see remote.<name>.proxy +http.cookiefile:: + File containing previously stored cookie lines which should be used + in the git http session, if they match the server. The file format + of the file to read cookies from should be plain HTTP headers or + the Netscape/Mozilla cookie file format (see linkgit:curl[1]). + NOTE that the file specified with http.cookiefile is only used as + input. No cookies will be stored in the file. + http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment @@ -1311,9 +1350,16 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used only by the `\--patch` mode of - linkgit:git-add[1]. Note that this setting is silently - ignored if portable keystroke input is not available. + Currently this is used by the `\--patch` mode of + linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], + linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this + setting is silently ignored if portable keystroke input + is not available. + +log.abbrevCommit:: + If true, makes linkgit:git-log[1], linkgit:git-show[1], and + linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may + override this option with `\--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. @@ -1438,7 +1484,8 @@ notes.rewriteRef:: You may also specify this configuration several times. + Does not have a default value; you must configure this variable to -enable note rewriting. +enable note rewriting. Set it to `refs/notes/commits` to enable +rewriting for the default commit notes. + This setting can be overridden with the `GIT_NOTES_REWRITE_REF` environment variable, which must be a colon separated list of refs or @@ -1466,6 +1513,10 @@ pack.compression:: not set, defaults to -1, the zlib default, which is "a default compromise between speed and compression (currently equivalent to level 6)." ++ +Note that changing the compression level will not automatically recompress +all existing objects. You can force recompression by passing the -F option +to linkgit:git-repack[1]. pack.deltaCacheSize:: The maximum memory in bytes used for caching deltas in @@ -1521,11 +1572,13 @@ pack.packSizeLimit:: supported. pager.<cmd>:: - Allows turning on or off pagination of the output of a - particular git subcommand when writing to a tty. If - `\--paginate` or `\--no-pager` is specified on the command line, - it takes precedence over this option. To disable pagination for - all commands, set `core.pager` or `GIT_PAGER` to `cat`. + If the value is boolean, turns on or off pagination of the + output of a particular git subcommand when writing to a tty. + Otherwise, turns on pagination for the subcommand using the + pager specified by the value of `pager.<cmd>`. If `\--paginate` + or `\--no-pager` is specified on the command line, it takes + precedence over this option. To disable pagination for all + commands, set `core.pager` or `GIT_PAGER` to `cat`. pretty.<name>:: Alias for a --pretty= format string, as specified in @@ -1550,12 +1603,13 @@ push.default:: no refspec is implied by any of the options given on the command line. Possible values are: + -* `nothing` do not push anything. -* `matching` push all matching branches. +* `nothing` - do not push anything. +* `matching` - push all matching branches. All branches having the same name in both ends are considered to be matching. This is the default. -* `tracking` push the current branch to its upstream branch. -* `current` push the current branch to a branch of the same name. +* `upstream` - push the current branch to its upstream branch. +* `tracking` - deprecated synonym for `upstream`. +* `current` - push the current branch to a branch of the same name. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -1573,7 +1627,8 @@ receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a broken link. The result of an abort are only dangling objects. - Defaults to false. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. receive.unpackLimit:: If the number of objects received in a push is below this @@ -1727,6 +1782,7 @@ sendemail.to:: sendemail.smtpdomain:: sendemail.smtpserver:: sendemail.smtpserverport:: +sendemail.smtpserveroption:: sendemail.smtpuser:: sendemail.thread:: sendemail.validate:: @@ -1755,9 +1811,9 @@ status.showUntrackedFiles:: the untracked files. Possible values are: + -- - - 'no' - Show no untracked files - - 'normal' - Shows untracked files and directories - - 'all' - Shows also individual files in untracked directories. +* `no` - Show no untracked files. +* `normal` - Show untracked files and directories. +* `all` - Show also individual files in untracked directories. -- + If this variable is not specified, it defaults to 'normal'. @@ -1780,6 +1836,13 @@ submodule.<name>.update:: URL and other values found in the `.gitmodules` file. See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. +submodule.<name>.fetchRecurseSubmodules:: + This option can be used to control recursive fetching of this + submodule. It can be overridden by using the --[no-]recurse-submodules + command line option to "git fetch" and "git pull". + This setting will override that from in the linkgit:gitmodules[5] + file. + submodule.<name>.ignore:: Defines under what circumstances "git status" and the diff family show a submodule as modified. When set to "all", it will never be considered @@ -1800,6 +1863,11 @@ tar.umask:: archiving user's umask will be used instead. See umask(2) and linkgit:git-archive[1]. +transfer.fsckObjects:: + When `fetch.fsckObjects` or `receive.fsckObjects` are + not set, the value of this variable is used instead. + Defaults to false. + transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are not set, the value of this variable is used instead. diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt new file mode 100644 index 0000000000..1aed79e7dc --- /dev/null +++ b/Documentation/diff-config.txt @@ -0,0 +1,136 @@ +diff.autorefreshindex:: + When using 'git diff' to compare with work tree + files, do not consider stat-only change as changed. + Instead, silently run `git update-index --refresh` to + update the cached stat information for paths whose + contents in the work tree match the contents in the + index. This option defaults to true. Note that this + affects only 'git diff' Porcelain, and not lower level + 'diff' commands such as 'git diff-files'. + +diff.dirstat:: + A comma separated list of `--dirstat` parameters specifying the + default behavior of the `--dirstat` option to linkgit:git-diff[1]` + and friends. The defaults can be overridden on the command line + (using `--dirstat=<param1,param2,...>`). The fallback defaults + (when not changed by `diff.dirstat`) are `changes,noncumulative,3`. + The following parameters are available: ++ +-- +`changes`;; + Compute the dirstat numbers by counting the lines that have been + removed from the source, or added to the destination. This ignores + the amount of pure code movements within a file. In other words, + rearranging lines in a file is not counted as much as other changes. + This is the default behavior when no parameter is given. +`lines`;; + Compute the dirstat numbers by doing the regular line-based diff + analysis, and summing the removed/added line counts. (For binary + files, count 64-byte chunks instead, since binary files have no + natural concept of lines). This is a more expensive `--dirstat` + behavior than the `changes` behavior, but it does count rearranged + lines within a file as much as other changes. The resulting output + is consistent with what you get from the other `--*stat` options. +`files`;; + Compute the dirstat numbers by counting the number of files changed. + Each changed file counts equally in the dirstat analysis. This is + the computationally cheapest `--dirstat` behavior, since it does + not have to look at the file contents at all. +`cumulative`;; + Count changes in a child directory for the parent directory as well. + Note that when using `cumulative`, the sum of the percentages + reported may exceed 100%. The default (non-cumulative) behavior can + be specified with the `noncumulative` parameter. +<limit>;; + An integer parameter specifies a cut-off percent (3% by default). + Directories contributing less than this percentage of the changes + are not shown in the output. +-- ++ +Example: The following will count changed files, while ignoring +directories with less than 10% of the total amount of changed files, +and accumulating child directory counts in the parent directories: +`files,10,cumulative`. + +diff.external:: + If this config variable is set, diff generation is not + performed using the internal diff machinery, but using the + given command. Can be overridden with the `GIT_EXTERNAL_DIFF' + environment variable. The command is called with parameters + as described under "git Diffs" in linkgit:git[1]. Note: if + you want to use an external diff program only on a subset of + your files, you might want to use linkgit:gitattributes[5] instead. + +diff.ignoreSubmodules:: + Sets the default value of --ignore-submodules. Note that this + affects only 'git diff' Porcelain, and not lower level 'diff' + commands such as 'git diff-files'. 'git checkout' also honors + this setting when reporting uncommitted changes. + +diff.mnemonicprefix:: + If set, 'git diff' uses a prefix pair that is different from the + standard "a/" and "b/" depending on what is being compared. When + this configuration is in effect, reverse diff output also swaps + the order of the prefixes: +`git diff`;; + compares the (i)ndex and the (w)ork tree; +`git diff HEAD`;; + compares a (c)ommit and the (w)ork tree; +`git diff --cached`;; + compares a (c)ommit and the (i)ndex; +`git diff HEAD:file1 file2`;; + compares an (o)bject and a (w)ork tree entity; +`git diff --no-index a b`;; + compares two non-git things (1) and (2). + +diff.noprefix:: + If set, 'git diff' does not show any source or destination prefix. + +diff.renameLimit:: + The number of files to consider when performing the copy/rename + detection; equivalent to the 'git diff' option '-l'. + +diff.renames:: + Tells git to detect renames. If set to any boolean value, it + will enable basic rename detection. If set to "copies" or + "copy", it will detect copies, as well. + +diff.suppressBlankEmpty:: + A boolean to inhibit the standard behavior of printing a space + before each empty output line. Defaults to false. + +diff.<driver>.command:: + The custom diff driver command. See linkgit:gitattributes[5] + for details. + +diff.<driver>.xfuncname:: + The regular expression that the diff driver should use to + recognize the hunk header. A built-in pattern may also be used. + See linkgit:gitattributes[5] for details. + +diff.<driver>.binary:: + Set this option to true to make the diff driver treat files as + binary. See linkgit:gitattributes[5] for details. + +diff.<driver>.textconv:: + The command that the diff driver should call to generate the + text-converted version of a file. The result of the + conversion is used to generate a human-readable diff. See + linkgit:gitattributes[5] for details. + +diff.<driver>.wordregex:: + The regular expression that the diff driver should use to + split words in a line. See linkgit:gitattributes[5] for + details. + +diff.<driver>.cachetextconv:: + Set this option to true to make the diff driver cache the text + conversion outputs. See linkgit:gitattributes[5] for details. + +diff.tool:: + The diff tool to be used by linkgit:git-difftool[1]. This + option overrides `merge.tool`, and has the same valid built-in + values as `merge.tool` minus "tortoisemerge" and plus + "kompare". Any other value is treated as a custom diff tool, + and there must be a corresponding `difftool.<tool>.cmd` + option. diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index 8f9a2412fd..c57460c03d 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -9,16 +9,15 @@ patch file. You can customize the creation of such patches via the GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables. What the -p option produces is slightly different from the traditional -diff format. +diff format: -1. It is preceded with a "git diff" header, that looks like - this: +1. It is preceded with a "git diff" header that looks like this: diff --git a/file1 b/file2 + The `a/` and `b/` filenames are the same unless rename/copy is involved. Especially, even for a creation or a deletion, -`/dev/null` is _not_ used in place of `a/` or `b/` filenames. +`/dev/null` is _not_ used in place of the `a/` or `b/` filenames. + When rename/copy is involved, `file1` and `file2` show the name of the source file of the rename/copy and the name of @@ -37,27 +36,51 @@ the file that rename/copy produces, respectively. similarity index <number> dissimilarity index <number> index <hash>..<hash> <mode> - -3. TAB, LF, double quote and backslash characters in pathnames - are represented as `\t`, `\n`, `\"` and `\\`, respectively. - If there is need for such substitution then the whole - pathname is put in double quotes. - ++ +File modes are printed as 6-digit octal numbers including the file type +and file permission bits. ++ +Path names in extended headers do not include the `a/` and `b/` prefixes. ++ The similarity index is the percentage of unchanged lines, and the dissimilarity index is the percentage of changed lines. It is a rounded down integer, followed by a percent sign. The similarity index value of 100% is thus reserved for two equal files, while 100% dissimilarity means that no line from the old file made it into the new one. ++ +The index line includes the SHA-1 checksum before and after the change. +The <mode> is included if the file mode does not change; otherwise, +separate lines indicate the old and the new mode. + +3. TAB, LF, double quote and backslash characters in pathnames + are represented as `\t`, `\n`, `\"` and `\\`, respectively. + If there is need for such substitution then the whole + pathname is put in double quotes. + +4. All the `file1` files in the output refer to files before the + commit, and all the `file2` files refer to files after the commit. + It is incorrect to apply each change to each file sequentially. For + example, this patch will swap a and b: + + diff --git a/a b/b + rename from a + rename to b + diff --git a/b b/a + rename from b + rename to a combined diff format -------------------- -"git-diff-tree", "git-diff-files" and "git-diff" can take '-c' or -'--cc' option to produce 'combined diff'. For showing a merge commit -with "git log -p", this is the default format; you can force showing -full diff with the '-m' option. +Any diff-generating command can take the `-c` or `--cc` option to +produce a 'combined diff' when showing a merge. This is the default +format when showing merges with linkgit:git-diff[1] or +linkgit:git-show[1]. Note also that you can give the `-m' option to any +of these commands to force generation of diffs with individual parents +of a merge. + A 'combined diff' format looks like this: ------------ diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 4656a97e60..9f7cba2be6 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -45,14 +45,24 @@ ifndef::git-format-patch[] Synonym for `-p --raw`. endif::git-format-patch[] +--minimal:: + Spend extra time to make sure the smallest possible + diff is produced. + --patience:: Generate a diff using the "patience diff" algorithm. ---stat[=width[,name-width]]:: +--stat[=<width>[,<name-width>[,<count>]]]:: Generate a diffstat. You can override the default - output width for 80-column terminal by `--stat=width`. + output width for 80-column terminal by `--stat=<width>`. The width of the filename part can be controlled by giving another width to it separated by a comma. + By giving a third parameter `<count>`, you can limit the + output to the first `<count>` lines, followed by + `...` if there are more. ++ +These parameters can also be set individually with `--stat-width=<width>`, +`--stat-name-width=<name-width>` and `--stat-count=<count>`. --numstat:: Similar to `\--stat`, but shows number of added and @@ -66,15 +76,49 @@ endif::git-format-patch[] number of modified files, as well as number of added and deleted lines. ---dirstat[=limit]:: - Output the distribution of relative amount of changes (number of lines added or - removed) for each sub-directory. Directories with changes below - a cut-off percent (3% by default) are not shown. The cut-off percent - can be set with `--dirstat=limit`. Changes in a child directory is not - counted for the parent directory, unless `--cumulative` is used. - ---dirstat-by-file[=limit]:: - Same as `--dirstat`, but counts changed files instead of lines. +--dirstat[=<param1,param2,...>]:: + Output the distribution of relative amount of changes for each + sub-directory. The behavior of `--dirstat` can be customized by + passing it a comma separated list of parameters. + The defaults are controlled by the `diff.dirstat` configuration + variable (see linkgit:git-config[1]). + The following parameters are available: ++ +-- +`changes`;; + Compute the dirstat numbers by counting the lines that have been + removed from the source, or added to the destination. This ignores + the amount of pure code movements within a file. In other words, + rearranging lines in a file is not counted as much as other changes. + This is the default behavior when no parameter is given. +`lines`;; + Compute the dirstat numbers by doing the regular line-based diff + analysis, and summing the removed/added line counts. (For binary + files, count 64-byte chunks instead, since binary files have no + natural concept of lines). This is a more expensive `--dirstat` + behavior than the `changes` behavior, but it does count rearranged + lines within a file as much as other changes. The resulting output + is consistent with what you get from the other `--*stat` options. +`files`;; + Compute the dirstat numbers by counting the number of files changed. + Each changed file counts equally in the dirstat analysis. This is + the computationally cheapest `--dirstat` behavior, since it does + not have to look at the file contents at all. +`cumulative`;; + Count changes in a child directory for the parent directory as well. + Note that when using `cumulative`, the sum of the percentages + reported may exceed 100%. The default (non-cumulative) behavior can + be specified with the `noncumulative` parameter. +<limit>;; + An integer parameter specifies a cut-off percent (3% by default). + Directories contributing less than this percentage of the changes + are not shown in the output. +-- ++ +Example: The following will count changed files, while ignoring +directories with less than 10% of the total amount of changed files, +and accumulating child directory counts in the parent directories: +`--dirstat=files,10,cumulative`. --summary:: Output a condensed summary of extended header information @@ -120,12 +164,19 @@ any of those replacements occurred. --color[=<when>]:: Show colored diff. - The value must be always (the default), never, or auto. + The value must be `always` (the default for `<when>`), `never`, or `auto`. + The default value is `never`. +ifdef::git-diff[] + It can be changed by the `color.ui` and `color.diff` + configuration settings. +endif::git-diff[] --no-color:: - Turn off colored diff, even when the configuration file - gives the default to color output. - Same as `--color=never`. + Turn off colored diff. +ifdef::git-diff[] + This can be used to override configuration settings. +endif::git-diff[] + It is the same as `--color=never`. --word-diff[=<mode>]:: Show a word diff, using the <mode> to delimit changed words. @@ -183,10 +234,14 @@ endif::git-format-patch[] ifndef::git-format-patch[] --check:: - Warn if changes introduce trailing whitespace - or an indent that uses a space before a tab. Exits with - non-zero status if problems are found. Not compatible with - --exit-code. + Warn if changes introduce whitespace errors. What are + considered whitespace errors is controlled by `core.whitespace` + configuration. By default, trailing whitespaces (including + lines that solely consist of whitespaces) and a space character + that is immediately followed by a tab character inside the + initial indent of the line are considered whitespace errors. + Exits with non-zero status if problems are found. Not compatible + with --exit-code. endif::git-format-patch[] --full-index:: @@ -207,6 +262,7 @@ endif::git-format-patch[] digits can be specified with `--abbrev=<n>`. -B[<n>][/<m>]:: +--break-rewrites[=[<n>][/<m>]]:: Break complete rewrite changes into pairs of delete and create. This serves two purposes: + @@ -229,6 +285,7 @@ eligible for being picked up as a possible source of a rename to another file. -M[<n>]:: +--find-renames[=<n>]:: ifndef::git-log[] Detect renames. endif::git-log[] @@ -237,30 +294,17 @@ ifdef::git-log[] For following files across renames while traversing history, see `--follow`. endif::git-log[] - If `n` is specified, it is a is a threshold on the similarity + If `n` is specified, it is a threshold on the similarity index (i.e. amount of addition/deletions compared to the file's size). For example, `-M90%` means git should consider a delete/add pair to be a rename if more than 90% of the file hasn't changed. -C[<n>]:: +--find-copies[=<n>]:: Detect copies as well as renames. See also `--find-copies-harder`. If `n` is specified, it has the same meaning as for `-M<n>`. -ifndef::git-format-patch[] ---diff-filter=[ACDMRTUXB*]:: - Select only files that are Added (`A`), Copied (`C`), - Deleted (`D`), Modified (`M`), Renamed (`R`), have their - type (i.e. regular file, symlink, submodule, ...) changed (`T`), - are Unmerged (`U`), are - Unknown (`X`), or have had their pairing Broken (`B`). - Any combination of the filter characters may be used. - When `*` (All-or-none) is added to the combination, all - paths are selected if there is any file that matches - other criteria in the comparison; if there is no file - that matches other criteria, nothing is selected. -endif::git-format-patch[] - --find-copies-harder:: For performance reasons, by default, `-C` option finds copies only if the original file of the copy was modified in the same @@ -270,6 +314,19 @@ endif::git-format-patch[] projects, so use it with caution. Giving more than one `-C` option has the same effect. +-D:: +--irreversible-delete:: + Omit the preimage for deletes, i.e. print only the header but not + the diff between the preimage and `/dev/null`. The resulting patch + is not meant to be applied with `patch` nor `git apply`; this is + solely for people who want to just concentrate on reviewing the + text after the change. In addition, the output obviously lack + enough information to apply such a patch in reverse, even manually, + hence the name of the option. ++ +When used together with `-B`, omit also the preimage in the deletion part +of a delete/create pair. + -l<num>:: The `-M` and `-C` options require O(n^2) processing time where n is the number of potential rename/copy targets. This @@ -278,14 +335,30 @@ endif::git-format-patch[] number. ifndef::git-format-patch[] +--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: + Select only files that are Added (`A`), Copied (`C`), + Deleted (`D`), Modified (`M`), Renamed (`R`), have their + type (i.e. regular file, symlink, submodule, ...) changed (`T`), + are Unmerged (`U`), are + Unknown (`X`), or have had their pairing Broken (`B`). + Any combination of the filter characters (including none) can be used. + When `*` (All-or-none) is added to the combination, all + paths are selected if there is any file that matches + other criteria in the comparison; if there is no file + that matches other criteria, nothing is selected. + -S<string>:: Look for differences that introduce or remove an instance of <string>. Note that this is different than the string simply appearing in diff output; see the 'pickaxe' entry in linkgit:gitdiffcore[7] for more details. +-G<regex>:: + Look for differences whose added or removed line matches + the given <regex>. + --pickaxe-all:: - When `-S` finds a change, show all the changes in that + When `-S` or `-G` finds a change, show all the changes in that changeset, not just the files that contain the change in <string>. @@ -335,7 +408,12 @@ endif::git-format-patch[] Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. +-W:: +--function-context:: + Show whole surrounding functions of changes. + ifndef::git-format-patch[] +ifndef::git-log[] --exit-code:: Make the program exit with codes similar to diff(1). That is, it exits with 1 if there were differences and @@ -343,6 +421,7 @@ ifndef::git-format-patch[] --quiet:: Disable all output of the program. Implies `--exit-code`. +endif::git-log[] endif::git-format-patch[] --ext-diff:: @@ -353,6 +432,17 @@ endif::git-format-patch[] --no-ext-diff:: Disallow external diff drivers. +--textconv:: +--no-textconv:: + Allow (or disallow) external text conversion filters to be run + when comparing binary files. See linkgit:gitattributes[5] for + details. Because textconv filters are typically a one-way + conversion, the resulting diff is suitable for human + consumption, but cannot be applied. For this reason, textconv + filters are enabled by default only for linkgit:git-diff[1] and + linkgit:git-log[1], but not for linkgit:git-format-patch[1] or + diff plumbing commands. + --ignore-submodules[=<when>]:: Ignore changes to submodules in the diff generation. <when> can be either "none", "untracked", "dirty" or "all", which is the default diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index e0ba8cc075..ae413e52a5 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -180,12 +180,12 @@ directory; clone from it to start a repository on the satellite machine. <2> clone sets these configuration variables by default. It arranges `git pull` to fetch and store the branches of mothership -machine to local `remotes/origin/*` tracking branches. +machine to local `remotes/origin/*` remote-tracking branches. <3> arrange `git push` to push local `master` branch to `remotes/satellite/master` branch of the mothership machine. <4> push will stash our work away on `remotes/satellite/master` -tracking branch on the mothership machine. You could use this as -a back-up method. +remote-tracking branch on the mothership machine. You could use this +as a back-up method. <5> on mothership machine, merge the work done on the satellite machine into the master branch. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 470ac31396..39d326abc6 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -36,7 +36,7 @@ ifndef::git-pull[] -p:: --prune:: - After fetching, remove any remote tracking branches which + After fetching, remove any remote-tracking branches which no longer exist on the remote. endif::git-pull[] @@ -53,6 +53,7 @@ endif::git-pull[] behavior for a remote may be specified with the remote.<name>.tagopt setting. See linkgit:git-config[1]. +ifndef::git-pull[] -t:: --tags:: Most of the tags are fetched automatically as branch @@ -64,6 +65,35 @@ endif::git-pull[] specified with the remote.<name>.tagopt setting. See linkgit:git-config[1]. +--recurse-submodules[=yes|on-demand|no]:: + This option controls if and under what conditions new commits of + populated submodules should be fetched too. It can be used as a + boolean option to completely disable recursion when set to 'no' or to + unconditionally recurse into all populated submodules when set to + 'yes', which is the default when this option is used without any + value. Use 'on-demand' to only recurse into a populated submodule + when the superproject retrieves a commit that updates the submodule's + reference to a commit that isn't already in the local submodule + clone. + +--no-recurse-submodules:: + Disable recursive fetching of submodules (this has the same effect as + using the '--recurse-submodules=no' option). + +--submodule-prefix=<path>:: + Prepend <path> to paths printed in informative messages + such as "Fetching submodule foo". This option is used + internally when recursing over submodules. + +--recurse-submodules-default=[yes|on-demand]:: + This option is used internally to temporarily provide a + non-negative default value for the --recurse-submodules + option. All other methods of configuring fetch's submodule + recursion (such as settings in linkgit:gitmodules[5] and + linkgit:git-config[1]) override this option, as does + specifying --[no-]recurse-submodules directly. +endif::git-pull[] + -u:: --update-head-ok:: By default 'git fetch' refuses to update the head which diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 73378b2bef..9c1d395722 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -92,9 +92,11 @@ See ``Interactive mode'' for details. edit it. After the editor was closed, adjust the hunk headers and apply the patch to the index. + -*NOTE*: Obviously, if you change anything else than the first character -on lines beginning with a space or a minus, the patch will no longer -apply. +The intent of this option is to pick and choose lines of the patch to +apply, or even to modify the contents of lines to be staged. This can be +quicker and more flexible than using the interactive hunk selector. +However, it is easy to confuse oneself and create a patch that does not +apply to the index. See EDITING PATCHES below. -u:: --update:: @@ -132,6 +134,8 @@ subdirectories. If some files could not be added because of errors indexing them, do not abort the operation, but continue adding the others. The command shall still exit with non-zero status. + The configuration variable `add.ignoreErrors` can be set to + true to make this the default behaviour. --ignore-missing:: This option can only be used together with --dry-run. By using @@ -270,7 +274,8 @@ patch:: This lets you choose one path out of a 'status' like selection. After choosing the path, it presents the diff between the index and the working tree file and asks you if you want to stage - the change of each hunk. You can say: + the change of each hunk. You can select one of the following + options and type return: y - stage this hunk n - do not stage this hunk @@ -289,12 +294,87 @@ patch:: + After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated with the selected hunks. ++ +You can omit having to type return here, by setting the configuration +variable `interactive.singlekey` to `true`. diff:: This lets you review what will be committed (i.e. between HEAD and index). + +EDITING PATCHES +--------------- + +Invoking `git add -e` or selecting `e` from the interactive hunk +selector will open a patch in your editor; after the editor exits, the +result is applied to the index. You are free to make arbitrary changes +to the patch, but note that some changes may have confusing results, or +even result in a patch that cannot be applied. If you want to abort the +operation entirely (i.e., stage nothing new in the index), simply delete +all lines of the patch. The list below describes some common things you +may see in a patch, and which editing operations make sense on them. + +-- +added content:: + +Added content is represented by lines beginning with "{plus}". You can +prevent staging any addition lines by deleting them. + +removed content:: + +Removed content is represented by lines beginning with "-". You can +prevent staging their removal by converting the "-" to a " " (space). + +modified content:: + +Modified content is represented by "-" lines (removing the old content) +followed by "{plus}" lines (adding the replacement content). You can +prevent staging the modification by converting "-" lines to " ", and +removing "{plus}" lines. Beware that modifying only half of the pair is +likely to introduce confusing changes to the index. +-- + +There are also more complex operations that can be performed. But beware +that because the patch is applied only to the index and not the working +tree, the working tree will appear to "undo" the change in the index. +For example, introducing a new line into the index that is in neither +the HEAD nor the working tree will stage the new line for commit, but +the line will appear to be reverted in the working tree. + +Avoid using these constructs, or do so with extreme caution. + +-- +removing untouched content:: + +Content which does not differ between the index and working tree may be +shown on context lines, beginning with a " " (space). You can stage +context lines for removal by converting the space to a "-". The +resulting working tree file will appear to re-add the content. + +modifying existing content:: + +One can also modify context lines by staging them for removal (by +converting " " to "-") and adding a "{plus}" line with the new content. +Similarly, one can modify "{plus}" lines for existing additions or +modifications. In all cases, the new modification will appear reverted +in the working tree. + +new content:: + +You may also add new content that does not exist in the patch; simply +add new lines, each starting with "{plus}". The addition will appear +reverted in the working tree. +-- + +There are also several operations which should be avoided entirely, as +they will make the patch impossible to apply: + +* adding context (" ") or removal ("-") lines +* deleting context or removal lines +* modifying the contents of context or removal lines + SEE ALSO -------- linkgit:git-status[1] @@ -304,14 +384,6 @@ linkgit:git-mv[1] linkgit:git-commit[1] linkgit:git-update-index[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 9e62f8778f..887466d777 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -13,8 +13,9 @@ SYNOPSIS [--3way] [--interactive] [--committer-date-is-author-date] [--ignore-date] [--ignore-space-change | --ignore-whitespace] [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] - [--reject] [-q | --quiet] [--scissors | --no-scissors] - [<mbox> | <Maildir>...] + [--exclude=<path>] [--reject] [-q | --quiet] + [--scissors | --no-scissors] + [(<mbox> | <Maildir>)...] 'git am' (--continue | --skip | --abort) DESCRIPTION @@ -25,7 +26,7 @@ current branch. OPTIONS ------- -<mbox>|<Maildir>...:: +(<mbox>|<Maildir>)...:: The list of mailbox files to read patches from. If you do not supply this argument, the command reads from the standard input. If you supply directories, they will be treated as Maildirs. @@ -87,6 +88,7 @@ default. You can use `--no-utf8` to override this. -C<n>:: -p<n>:: --directory=<dir>:: +--exclude=<path>:: --reject:: These flags are passed to the 'git apply' (see linkgit:git-apply[1]) program that applies @@ -173,9 +175,9 @@ aborts in the middle. You can recover from this in one of two ways: the index file to bring it into a state that the patch should have produced. Then run the command with the '--resolved' option. -The command refuses to process new mailboxes while the `.git/rebase-apply` -directory exists, so if you decide to start over from scratch, -run `rm -f -r .git/rebase-apply` before running the command with mailbox +The command refuses to process new mailboxes until the current +operation is finished, so if you decide to start over from scratch, +run `git am --abort` before running the command with mailbox names. Before any patches are applied, ORIG_HEAD is set to the tip of the @@ -189,15 +191,6 @@ SEE ALSO -------- linkgit:git-apply[1]. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-annotate.txt b/Documentation/git-annotate.txt index 0590eec056..05fd482b74 100644 --- a/Documentation/git-annotate.txt +++ b/Documentation/git-annotate.txt @@ -7,6 +7,7 @@ git-annotate - Annotate file lines with commit information SYNOPSIS -------- +[verse] 'git annotate' [options] file [revision] DESCRIPTION @@ -27,10 +28,6 @@ SEE ALSO -------- linkgit:git-blame[1] -AUTHOR ------- -Written by Ryan Anderson <ryan@michonline.com>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 4a74b23d40..afd2c9ae59 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -12,17 +12,17 @@ SYNOPSIS 'git apply' [--stat] [--numstat] [--summary] [--check] [--index] [--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse] [--allow-binary-replacement | --binary] [--reject] [-z] - [-pNUM] [-CNUM] [--inaccurate-eof] [--recount] [--cached] + [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached] [--ignore-space-change | --ignore-whitespace ] - [--whitespace=<nowarn|warn|fix|error|error-all>] - [--exclude=PATH] [--include=PATH] [--directory=<root>] + [--whitespace=(nowarn|warn|fix|error|error-all)] + [--exclude=<path>] [--include=<path>] [--directory=<root>] [--verbose] [<patch>...] DESCRIPTION ----------- Reads the supplied diff output (i.e. "a patch") and applies it to files. With the `--index` option the patch is also applied to the index, and -with the `--cache` option the patch is only applied to the index. +with the `--cached` option the patch is only applied to the index. Without these options, the command applies the patch only to files, and does not require them to be in a git repository. @@ -246,20 +246,10 @@ If `--index` is not specified, then the submodule commits in the patch are ignored and only the absence or presence of the corresponding subdirectory is checked and (if possible) updated. - SEE ALSO -------- linkgit:git-am[1]. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt index 4f358c8d6c..f4504ba9bf 100644 --- a/Documentation/git-archimport.txt +++ b/Documentation/git-archimport.txt @@ -107,14 +107,6 @@ OPTIONS Archive/branch identifier in a format that `tla log` understands. -Author ------- -Written by Martin Langhoff <martin@catalyst.net.nz>. - -Documentation --------------- -Documentation by Junio C Hamano, Martin Langhoff and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index 8d3e66626f..ac7006e640 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git archive' [--format=<fmt>] [--list] [--prefix=<prefix>/] [<extra>] [-o | --output=<file>] [--worktree-attributes] [--remote=<repo> [--exec=<git-upload-archive>]] <tree-ish> - [path...] + [<path>...] DESCRIPTION ----------- @@ -73,7 +73,7 @@ OPTIONS <tree-ish>:: The tree or commit to produce an archive for. -path:: +<path>:: Without an optional path parameter, all files and subdirectories of the current working directory are included in the archive. If one or more paths are specified, only these are included. @@ -98,7 +98,27 @@ tar.umask:: tar archive entries. The default is 0002, which turns off the world write bit. The special value "user" indicates that the archiving user's umask will be used instead. See umask(2) for - details. + details. If `--remote` is used then only the configuration of + the remote repository takes effect. + +tar.<format>.command:: + This variable specifies a shell command through which the tar + output generated by `git archive` should be piped. The command + is executed using the shell with the generated tar file on its + standard input, and should produce the final output on its + standard output. Any compression-level options will be passed + to the command (e.g., "-9"). An output file with the same + extension as `<format>` will be use this format if no other + format is given. ++ +The "tar.gz" and "tgz" formats are defined automatically and default to +`gzip -cn`. You may override them with custom commands. + +tar.<format>.remote:: + If true, enable `<format>` for use by remote clients via + linkgit:git-upload-archive[1]. Defaults to false for + user-defined formats, but true for the "tar.gz" and "tgz" + formats. ATTRIBUTES ---------- @@ -116,51 +136,57 @@ Note that attributes are by default taken from the `.gitattributes` files in the tree that is being archived. If you want to tweak the way the output is generated after the fact (e.g. you committed without adding an appropriate export-ignore in its `.gitattributes`), adjust the checked out -`.gitattributes` file as necessary and use `--work-tree-attributes` +`.gitattributes` file as necessary and use `--worktree-attributes` option. Alternatively you can keep necessary attributes that should apply while archiving any tree in your `$GIT_DIR/info/attributes` file. EXAMPLES -------- -git archive --format=tar --prefix=junk/ HEAD | (cd /var/tmp/ && tar xf -):: +`git archive --format=tar --prefix=junk/ HEAD | (cd /var/tmp/ && tar xf -)`:: Create a tar archive that contains the contents of the latest commit on the current branch, and extract it in the `/var/tmp/junk` directory. -git archive --format=tar --prefix=git-1.4.0/ v1.4.0 | gzip >git-1.4.0.tar.gz:: +`git archive --format=tar --prefix=git-1.4.0/ v1.4.0 | gzip >git-1.4.0.tar.gz`:: Create a compressed tarball for v1.4.0 release. -git archive --format=tar --prefix=git-1.4.0/ v1.4.0{caret}\{tree\} | gzip >git-1.4.0.tar.gz:: +`git archive --format=tar.gz --prefix=git-1.4.0/ v1.4.0 >git-1.4.0.tar.gz`:: + + Same as above, but using the builtin tar.gz handling. + +`git archive --prefix=git-1.4.0/ -o git-1.4.0.tar.gz v1.4.0`:: + + Same as above, but the format is inferred from the output file. + +`git archive --format=tar --prefix=git-1.4.0/ v1.4.0{caret}\{tree\} | gzip >git-1.4.0.tar.gz`:: Create a compressed tarball for v1.4.0 release, but without a global extended pax header. -git archive --format=zip --prefix=git-docs/ HEAD:Documentation/ > git-1.4.0-docs.zip:: +`git archive --format=zip --prefix=git-docs/ HEAD:Documentation/ > git-1.4.0-docs.zip`:: Put everything in the current head's Documentation/ directory into 'git-1.4.0-docs.zip', with the prefix 'git-docs/'. -git archive -o latest.zip HEAD:: +`git archive -o latest.zip HEAD`:: Create a Zip archive that contains the contents of the latest commit on the current branch. Note that the output format is inferred by the extension of the output file. +`git config tar.tar.xz.command "xz -c"`:: + + Configure a "tar.xz" format for making LZMA-compressed tarfiles. + You can use it specifying `--format=tar.xz`, or by creating an + output file like `-o foo.tar.xz`. + SEE ALSO -------- linkgit:gitattributes[5] -Author ------- -Written by Franck Bui-Huu and Rene Scharfe. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index c39d957c3a..e4f46bc18d 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -8,6 +8,7 @@ git-bisect - Find by binary search the change that introduced a bug SYNOPSIS -------- +[verse] 'git bisect' <subcommand> <options> DESCRIPTION @@ -16,7 +17,7 @@ The command takes various subcommands, and different options depending on the subcommand: git bisect help - git bisect start [<bad> [<good>...]] [--] [<paths>...] + git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] git bisect bad [<rev>] git bisect good [<rev>...] git bisect skip [(<rev>|<range>)...] @@ -241,7 +242,12 @@ exit(3) manual page), as the value is chopped with "& 0377". The special exit code 125 should be used when the current source code cannot be tested. If the script exits with this code, the current -revision will be skipped (see `git bisect skip` above). +revision will be skipped (see `git bisect skip` above). 125 was chosen +as the highest sensible value to use for this purpose, because 126 and 127 +are used by POSIX shells to signal specific error status (127 is for +command not found, 126 is for command found but not executable---these +details do not matter, as they are normal errors in the script, as far as +"bisect run" is concerned). You may often find that during a bisect session you want to have temporary modifications (e.g. s/#define DEBUG 0/#define DEBUG 1/ in a @@ -257,6 +263,19 @@ rewind the tree to the pristine state. Finally the script should exit with the status of the real test to let the "git bisect run" command loop determine the eventual outcome of the bisect session. +OPTIONS +------- +--no-checkout:: ++ +Do not checkout the new working tree at each iteration of the bisection +process. Instead just update a special reference named 'BISECT_HEAD' to make +it point to the commit that should be tested. ++ +This option may be useful when the test you would perform in each step +does not require a checked out tree. ++ +If the repository is bare, `--no-checkout` is assumed. + EXAMPLES -------- @@ -274,61 +293,87 @@ $ git bisect start HEAD origin -- # HEAD is bad, origin is good $ git bisect run make test # "make test" builds and tests ------------ -* Automatically bisect a broken test suite: +* Automatically bisect a broken test case: + ------------ $ cat ~/test.sh #!/bin/sh -make || exit 125 # this skips broken builds -make test # "make test" runs the test suite -$ git bisect start v1.3 v1.1 -- # v1.3 is bad, v1.1 is good +make || exit 125 # this skips broken builds +~/check_test_case.sh # does the test case pass? +$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10 $ git bisect run ~/test.sh ------------ + Here we use a "test.sh" custom script. In this script, if "make" fails, we skip the current commit. +"check_test_case.sh" should "exit 0" if the test case passes, +and "exit 1" otherwise. + -It is safer to use a custom script outside the repository to prevent -interactions between the bisect, make and test processes and the -script. -+ -"make test" should "exit 0", if the test suite passes, and -"exit 1" otherwise. +It is safer if both "test.sh" and "check_test_case.sh" are +outside the repository to prevent interactions between the bisect, +make and test processes and the scripts. -* Automatically bisect a broken test case: +* Automatically bisect with temporary modifications (hot-fix): + ------------ $ cat ~/test.sh #!/bin/sh -make || exit 125 # this skips broken builds -~/check_test_case.sh # does the test case passes ? -$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10 -$ git bisect run ~/test.sh + +# tweak the working tree by merging the hot-fix branch +# and then attempt a build +if git merge --no-commit hot-fix && + make +then + # run project specific test and report its status + ~/check_test_case.sh + status=$? +else + # tell the caller this is untestable + status=125 +fi + +# undo the tweak to allow clean flipping to the next commit +git reset --hard + +# return control +exit $status ------------ + -Here "check_test_case.sh" should "exit 0" if the test case passes, -and "exit 1" otherwise. -+ -It is safer if both "test.sh" and "check_test_case.sh" scripts are -outside the repository to prevent interactions between the bisect, -make and test processes and the scripts. +This applies modifications from a hot-fix branch before each test run, +e.g. in case your build or test environment changed so that older +revisions may need a fix which newer ones have already. (Make sure the +hot-fix branch is based off a commit which is contained in all revisions +which you are bisecting, so that the merge does not pull in too much, or +use `git cherry-pick` instead of `git merge`.) -* Automatically bisect a broken test suite: +* Automatically bisect a broken test case: + ------------ $ git bisect start HEAD HEAD~10 -- # culprit is among the last 10 $ git bisect run sh -c "make || exit 125; ~/check_test_case.sh" ------------ + -Does the same as the previous example, but on a single line. +This shows that you can do without a run script if you write the test +on a single line. + +* Locate a good region of the object graph in a damaged repository ++ +------------ +$ git bisect start HEAD <known-good-commit> [ <boundary-commit> ... ] --no-checkout +$ git bisect run sh -c ' + GOOD=$(git for-each-ref "--format=%(objectname)" refs/bisect/good-*) && + git rev-list --objects BISECT_HEAD --not $GOOD >tmp.$$ && + git pack-objects --stdout >/dev/null <tmp.$$ + rc=$? + rm -f tmp.$$ + test $rc = 0' -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> +------------ ++ +In this case, when 'git bisect run' finishes, bisect/bad will refer to a commit that +has at least one parent whose reachable graph is fully traversable in the sense +required by 'git pack objects'. -Documentation -------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. SEE ALSO -------- diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index a27f43950f..9516914236 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -8,8 +8,8 @@ git-blame - Show what revision and author last modified each line of a file SYNOPSIS -------- [verse] -'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-p] [-w] [--incremental] [-L n,m] - [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] +'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] [-L n,m] + [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file> DESCRIPTION @@ -65,10 +65,19 @@ include::blame-options.txt[] -s:: Suppress the author name and timestamp from the output. +-e:: +--show-email:: + Show the author email instead of author name (Default: off). + -w:: Ignore whitespace when comparing the parent's version and the child's to find where the lines came from. +--abbrev=<n>:: + Instead of using the default 7+1 hexadecimal digits as the + abbreviated object name, use <n>+1 digits. Note that 1 column + is used for a caret to mark the boundary commit. + THE PORCELAIN FORMAT -------------------- @@ -96,6 +105,19 @@ The contents of the actual line is output after the above header, prefixed by a TAB. This is to allow adding more header elements later. +The porcelain format generally suppresses commit information that has +already been seen. For example, two lines that are blamed to the same +commit will both be shown, but the details for that commit will be shown +only once. This is more efficient, but may require more state be kept by +the reader. The `--line-porcelain` option can be used to output full +commit information for each line, allowing simpler (but less efficient) +usage like: + + # count the number of lines attributed to each author + git blame --line-porcelain file | + sed -n 's/^author //p' | + sort | uniq -c | sort -rn + SPECIFYING RANGES ----------------- @@ -194,10 +216,6 @@ SEE ALSO -------- linkgit:git-annotate[1] -AUTHOR ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 1940256930..f46013c91f 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -9,8 +9,8 @@ SYNOPSIS -------- [verse] 'git branch' [--color[=<when>] | --no-color] [-r | -a] - [-v [--abbrev=<length> | --no-abbrev]] - [(--merged | --no-merged | --contains) [<commit>]] + [--list] [-v [--abbrev=<length> | --no-abbrev]] + [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> 'git branch' (-d | -D) [-r] <branchname>... @@ -20,7 +20,11 @@ DESCRIPTION With no arguments, existing branches are listed and the current branch will be highlighted with an asterisk. Option `-r` causes the remote-tracking -branches to be listed, and option `-a` shows both. +branches to be listed, and option `-a` shows both. This list mode is also +activated by the `--list` option (see below). +<pattern> restricts the output to matching branches, the pattern is a shell +wildcard (i.e., matched using fnmatch(3)) +Multiple patterns may be given; if any of them matches, the tag is shown. With `--contains`, shows only the branches that contain the named commit (in other words, the branches whose tip commits are descendants of the @@ -37,11 +41,12 @@ Note that this will create the new branch, but it will not switch the working tree to it; use "git checkout <newbranch>" to switch to the new branch. -When a local branch is started off a remote branch, git sets up the +When a local branch is started off a remote-tracking branch, git sets up the branch so that 'git pull' will appropriately merge from -the remote branch. This behavior may be changed via the global +the remote-tracking branch. This behavior may be changed via the global `branch.autosetupmerge` configuration flag. That setting can be -overridden by using the `--track` and `--no-track` options. +overridden by using the `--track` and `--no-track` options, and +changed later using `git branch --set-upstream`. With a '-m' or '-M' option, <oldbranch> will be renamed to <newbranch>. If <oldbranch> had a corresponding reflog, it is renamed to match @@ -63,6 +68,7 @@ way to clean up all obsolete remote-tracking branches. OPTIONS ------- -d:: +--delete:: Delete a branch. The branch must be fully merged in its upstream branch, or in `HEAD` if no upstream was set with `--track` or `--set-upstream`. @@ -71,6 +77,7 @@ OPTIONS Delete a branch irrespective of its merged status. -l:: +--create-reflog:: Create the branch's reflog. This activates recording of all changes made to the branch ref, enabling use of date based sha1 expressions such as "<branchname>@\{yesterday}". @@ -83,13 +90,15 @@ OPTIONS already. Without `-f` 'git branch' refuses to change an existing branch. -m:: +--move:: Move/rename a branch and the corresponding reflog. -M:: Move/rename a branch even if the new branch name already exists. --color[=<when>]:: - Color branches to highlight current, local, and remote branches. + Color branches to highlight current, local, and + remote-tracking branches. The value must be always (the default), never, or auto. --no-color:: @@ -98,20 +107,28 @@ OPTIONS Same as `--color=never`. -r:: +--remotes:: List or delete (if used with -d) the remote-tracking branches. -a:: +--all:: List both remote-tracking branches and local branches. +--list:: + Activate the list mode. `git branch <pattern>` would try to create a branch, + use `git branch --list <pattern>` to list matching branches. + -v:: --verbose:: - Show sha1 and commit subject line for each head, along with + When in list mode, + show sha1 and commit subject line for each head, along with relationship to upstream branch (if any). If given twice, print the name of the upstream branch, as well. --abbrev=<length>:: Alter the sha1's minimum display length in the output listing. - The default value is 7. + The default value is 7 and can be overridden by the `core.abbrev` + config option. --no-abbrev:: Display the full sha1s in the output listing rather than abbreviating them. @@ -125,11 +142,11 @@ OPTIONS it directs `git pull` without arguments to pull from the upstream when the new branch is checked out. + -This behavior is the default when the start point is a remote branch. +This behavior is the default when the start point is a remote-tracking branch. Set the branch.autosetupmerge configuration variable to `false` if you want `git checkout` and `git branch` to always behave as if '--no-track' were given. Set it to `always` if you want this behavior when the -start-point is either a local or remote branch. +start-point is either a local or remote-tracking branch. --no-track:: Do not set up "upstream" configuration, even if the @@ -230,14 +247,6 @@ linkgit:git-remote[1], link:user-manual.html#what-is-a-branch[``Understanding history: What is a branch?''] in the Git User's Manual. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 38e59afb34..92b01ec25d 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -11,8 +11,8 @@ SYNOPSIS [verse] 'git bundle' create <file> <git-rev-list-args> 'git bundle' verify <file> -'git bundle' list-heads <file> [refname...] -'git bundle' unbundle <file> [refname...] +'git bundle' list-heads <file> [<refname>...] +'git bundle' unbundle <file> [<refname>...] DESCRIPTION ----------- @@ -59,7 +59,7 @@ unbundle <file>:: <git-rev-list-args>:: A list of arguments, acceptable to 'git rev-parse' and - 'git rev-list' (and containg a named ref, see SPECIFYING REFERENCES + 'git rev-list' (and containing a named ref, see SPECIFYING REFERENCES below), that specifies the specific objects and references to transport. For example, `master{tilde}10..master` causes the current master reference to be packaged along with all objects @@ -68,7 +68,7 @@ unbundle <file>:: packaged. -[refname...]:: +[<refname>...]:: A list of references used to limit the references reported as available. This is principally of use to 'git fetch', which expects to receive only those references asked for and not @@ -201,10 +201,6 @@ You can also see what references it offers: $ git ls-remote mybundle ---------------- -Author ------- -Written by Mark Levedahl <mdl123@verizon.net> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index a3f56b07fd..2fb95bbd19 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -27,7 +27,7 @@ OPTIONS <object>:: The name of the object to show. For a more complete list of ways to spell object names, see - the "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. + the "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7]. -t:: Instead of the content, show the object type identified by @@ -100,14 +100,6 @@ for each object specified on stdin that does not exist in the repository: <object> SP missing LF ------------ -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 50824e3a2d..5abdbaa51c 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -9,8 +9,8 @@ git-check-attr - Display gitattributes information SYNOPSIS -------- [verse] -'git check-attr' attr... [--] pathname... -'git check-attr' --stdin [-z] attr... < <list-of-paths> +'git check-attr' [-a | --all | attr...] [--] pathname... +'git check-attr' --stdin [-z] [-a | --all | attr...] < <list-of-paths> DESCRIPTION ----------- @@ -19,6 +19,14 @@ For every pathname, this command will list if each attribute is 'unspecified', OPTIONS ------- +-a, --all:: + List all attributes that are associated with the specified + paths. If this option is used, then 'unspecified' attributes + will not be included in the output. + +--cached:: + Consider `.gitattributes` in the index only, ignoring the working tree. + --stdin:: Read file names from stdin instead of from the command-line. @@ -28,8 +36,11 @@ OPTIONS \--:: Interpret all preceding arguments as attributes and all following - arguments as path names. If not supplied, only the first argument will - be treated as an attribute. + arguments as path names. + +If none of `--stdin`, `--all`, or `--` is used, the first argument +will be treated as an attribute and the rest of the arguments as +pathnames. OUTPUT ------ @@ -69,6 +80,13 @@ org/example/MyClass.java: diff: java org/example/MyClass.java: myAttr: set --------------- +* Listing all attributes for a file: +--------------- +$ git check-attr --all -- org/example/MyClass.java +org/example/MyClass.java: diff: java +org/example/MyClass.java: myAttr: set +--------------- + * Listing an attribute for multiple files: --------------- $ git check-attr myAttr -- org/example/MyClass.java org/example/NoMyAttr.java @@ -86,15 +104,6 @@ SEE ALSO -------- linkgit:gitattributes[5]. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by James Bowes. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index f5c2e0601d..103e7b128d 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -8,8 +8,9 @@ git-check-ref-format - Ensures that a reference name is well formed SYNOPSIS -------- [verse] -'git check-ref-format' <refname> -'git check-ref-format' --print <refname> +'git check-ref-format' [--normalize] + [--[no-]allow-onelevel] [--refspec-pattern] + <refname> 'git check-ref-format' --branch <branchname-shorthand> DESCRIPTION @@ -18,29 +19,38 @@ Checks if a given 'refname' is acceptable, and exits with a non-zero status if it is not. A reference is used in git to specify branches and tags. A -branch head is stored under the `$GIT_DIR/refs/heads` directory, and -a tag is stored under the `$GIT_DIR/refs/tags` directory (or, if refs -are packed by `git gc`, as entries in the `$GIT_DIR/packed-refs` file). +branch head is stored in the `refs/heads` hierarchy, while +a tag is stored in the `refs/tags` hierarchy of the ref namespace +(typically in `$GIT_DIR/refs/heads` and `$GIT_DIR/refs/tags` +directories or, as entries in file `$GIT_DIR/packed-refs` +if refs are packed by `git gc`). + git imposes the following rules on how references are named: . They can include slash `/` for hierarchical (directory) grouping, but no slash-separated component can begin with a - dot `.`. + dot `.` or end with the sequence `.lock`. . They must contain at least one `/`. This enforces the presence of a category like `heads/`, `tags/` etc. but the actual names are not - restricted. + restricted. If the `--allow-onelevel` option is used, this rule + is waived. . They cannot have two consecutive dots `..` anywhere. . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, - or open bracket `[` anywhere. + caret `{caret}`, or colon `:` anywhere. + +. They cannot have question-mark `?`, asterisk `{asterisk}`, or open + bracket `[` anywhere. See the `--refspec-pattern` option below for + an exception to this rule. -. They cannot end with a slash `/` nor a dot `.`. +. They cannot begin or end with a slash `/` or contain multiple + consecutive slashes (see the `--normalize` option below for an + exception to this rule) -. They cannot end with the sequence `.lock`. +. They cannot end with a dot `.`. . They cannot contain a sequence `@{`. @@ -49,7 +59,7 @@ git imposes the following rules on how references are named: These rules make it easy for shell script based tools to parse reference names, pathname expansion by the shell when a reference name is used unquoted (by mistake), and also avoids ambiguities in certain -reference name expressions (see linkgit:gitrevisions[1]): +reference name expressions (see linkgit:gitrevisions[7]): . A double-dot `..` is often used as in `ref1..ref2`, and in some contexts this notation means `{caret}ref1 ref2` (i.e. not in @@ -65,16 +75,36 @@ reference name expressions (see linkgit:gitrevisions[1]): . at-open-brace `@{` is used as a notation to access a reflog entry. -With the `--print` option, if 'refname' is acceptable, it prints the -canonicalized name of a hypothetical reference with that name. That is, -it prints 'refname' with any extra `/` characters removed. - With the `--branch` option, it expands the ``previous branch syntax'' `@{-n}`. For example, `@{-1}` is a way to refer the last branch you were on. This option should be used by porcelains to accept this syntax anywhere a branch name is expected, so they can act as if you typed the branch name. +OPTIONS +------- +--allow-onelevel:: +--no-allow-onelevel:: + Controls whether one-level refnames are accepted (i.e., + refnames that do not contain multiple `/`-separated + components). The default is `--no-allow-onelevel`. + +--refspec-pattern:: + Interpret <refname> as a reference name pattern for a refspec + (as used with remote repositories). If this option is + enabled, <refname> is allowed to contain a single `{asterisk}` + in place of a one full pathname component (e.g., + `foo/{asterisk}/bar` but not `foo/bar{asterisk}`). + +--normalize:: + Normalize 'refname' by removing any leading slash (`/`) + characters and collapsing runs of adjacent slashes between + name components into a single slash. Iff the normalized + refname is valid then print it to standard output and exit + with a status of 0. (`--print` is a deprecated way to spell + `--normalize`.) + + EXAMPLES -------- @@ -87,7 +117,7 @@ $ git check-ref-format --branch @{-1} * Determine the reference name to use for a new branch: + ------------ -$ ref=$(git check-ref-format --print "refs/heads/$newbranch") || +$ ref=$(git check-ref-format --normalize "refs/heads/$newbranch") || die "we do not like '$newbranch' as a branch name." ------------ diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt index 62f9ab24c9..4d33e7be0f 100644 --- a/Documentation/git-checkout-index.txt +++ b/Documentation/git-checkout-index.txt @@ -13,7 +13,7 @@ SYNOPSIS [--stage=<number>|all] [--temp] [-z] [--stdin] - [--] [<file>]* + [--] [<file>...] DESCRIPTION ----------- @@ -172,18 +172,6 @@ $ git checkout-index --prefix=.merged- Makefile This will check out the currently cached copy of `Makefile` into the file `.merged-Makefile`. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - - -Documentation --------------- -Documentation by David Greaves, -Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index f88e9977d1..c0a96e6c1e 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,9 +9,10 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] +'git checkout' [-q] [-f] [-m] [--detach] [<commit>] 'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... -'git checkout' --patch [<tree-ish>] [--] [<paths>...] +'git checkout' [-p|--patch] [<tree-ish>] [--] [<paths>...] DESCRIPTION ----------- @@ -22,9 +23,10 @@ branch. 'git checkout' [<branch>]:: 'git checkout' -b|-B <new_branch> [<start point>]:: +'git checkout' [--detach] [<commit>]:: This form switches branches by updating the index, working - tree, and HEAD to reflect the specified branch. + tree, and HEAD to reflect the specified branch or commit. + If `-b` is given, a new branch is created as if linkgit:git-branch[1] were called and then checked out; in this case you can @@ -43,16 +45,16 @@ $ git checkout <branch> that is to say, the branch is not reset/created unless "git checkout" is successful. -'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: +'git checkout' [-p|--patch] [<tree-ish>] [--] <pathspec>...:: - When <paths> or `--patch` are given, 'git checkout' *not* switch - branches. It updates the named paths in the working tree from - the index file or from a named <tree-ish> (most often a commit). In - this case, the `-b` and `--track` options are meaningless and giving - either of them results in an error. The <tree-ish> argument can be - used to specify a specific tree-ish (i.e. commit, tag or tree) - to update the index for the given paths before updating the - working tree. + When <paths> or `--patch` are given, 'git checkout' does *not* + switch branches. It updates the named paths in the working tree + from the index file or from a named <tree-ish> (most often a + commit). In this case, the `-b` and `--track` options are + meaningless and giving either of them results in an error. The + <tree-ish> argument can be used to specify a specific tree-ish + (i.e. commit, tag or tree) to update the index for the given + paths before updating the working tree. + The index may contain unmerged entries because of a previous failed merge. By default, if you try to check out such an entry from the index, the @@ -98,7 +100,7 @@ entries; instead, unmerged entries are ignored. "--track" in linkgit:git-branch[1] for details. + If no '-b' option is given, the name of the new branch will be -derived from the remote branch. If "remotes/" or "refs/remotes/" +derived from the remote-tracking branch. If "remotes/" or "refs/remotes/" is prefixed it is stripped away, and then the part up to the next slash (which would be the nickname of the remote) is removed. This would tell us to use "hack" as the local branch when branching @@ -115,6 +117,13 @@ explicitly give a name with '-b' in such a case. Create the new branch's reflog; see linkgit:git-branch[1] for details. +--detach:: + Rather than checking out a branch to work on it, check out a + commit for inspection and discardable experiments. + This is the default behavior of "git checkout <commit>" when + <commit> is not a branch name. See the "DETACHED HEAD" section + below for details. + --orphan:: Create a new 'orphan' branch, named <new_branch>, started from <start_point> and switch to it. The first commit made on this @@ -174,7 +183,8 @@ the conflicted merge in the specified paths. working tree (and if a <tree-ish> was specified, the index). + This means that you can use `git checkout -p` to selectively discard -edits from your current working tree. +edits from your current working tree. See the ``Interactive Mode'' +section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, @@ -204,42 +214,140 @@ leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. -Detached HEAD +DETACHED HEAD ------------- +HEAD normally refers to a named branch (e.g. 'master'). Meanwhile, each +branch refers to a specific commit. Let's look at a repo with three +commits, one of them tagged, and with branch 'master' checked out: + +------------ + HEAD (refers to branch 'master') + | + v +a---b---c branch 'master' (refers to commit 'c') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ -It is sometimes useful to be able to 'checkout' a commit that is -not at the tip of one of your branches. The most obvious -example is to check out the commit at a tagged official release -point, like this: +When a commit is created in this state, the branch is updated to refer to +the new commit. Specifically, 'git commit' creates a new commit 'd', whose +parent is commit 'c', and then updates branch 'master' to refer to new +commit 'd'. HEAD still refers to branch 'master' and so indirectly now refers +to commit 'd': ------------ -$ git checkout v2.6.18 +$ edit; git add; git commit + + HEAD (refers to branch 'master') + | + v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') ------------ -Earlier versions of git did not allow this and asked you to -create a temporary branch using the `-b` option, but starting from -version 1.5.0, the above command 'detaches' your HEAD from the -current branch and directly points at the commit named by the tag -(`v2.6.18` in the example above). +It is sometimes useful to be able to checkout a commit that is not at +the tip of any named branch, or even to create a new commit that is not +referenced by a named branch. Let's look at what happens when we +checkout commit 'b' (here we show two ways this may be done): -You can use all git commands while in this state. You can use -`git reset --hard $othercommit` to further move around, for -example. You can make changes and create a new commit on top of -a detached HEAD. You can even create a merge by using `git -merge $othercommit`. +------------ +$ git checkout v2.0 # or +$ git checkout master^^ + + HEAD (refers to commit 'b') + | + v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ -The state you are in while your HEAD is detached is not recorded -by any branch (which is natural --- you are not on any branch). -What this means is that you can discard your temporary commits -and merges by switching back to an existing branch (e.g. `git -checkout master`), and a later `git prune` or `git gc` would -garbage-collect them. If you did this by mistake, you can ask -the reflog for HEAD where you were, e.g. +Notice that regardless of which checkout command we use, HEAD now refers +directly to commit 'b'. This is known as being in detached HEAD state. +It means simply that HEAD refers to a specific commit, as opposed to +referring to a named branch. Let's see what happens when we create a commit: ------------ -$ git log -g -2 HEAD +$ edit; git add; git commit + + HEAD (refers to commit 'e') + | + v + e + / +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ + +There is now a new commit 'e', but it is referenced only by HEAD. We can +of course add yet another commit in this state: + +------------ +$ edit; git add; git commit + + HEAD (refers to commit 'f') + | + v + e---f + / +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ + +In fact, we can perform all the normal git operations. But, let's look +at what happens when we then checkout master: + +------------ +$ git checkout master + + HEAD (refers to branch 'master') + e---f | + / v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') ------------ +It is important to realize that at this point nothing refers to commit +'f'. Eventually commit 'f' (and by extension commit 'e') will be deleted +by the routine git garbage collection process, unless we create a reference +before that happens. If we have not yet moved away from commit 'f', +any of these will create a reference to it: + +------------ +$ git checkout -b foo <1> +$ git branch foo <2> +$ git tag foo <3> +------------ + +<1> creates a new branch 'foo', which refers to commit 'f', and then +updates HEAD to refer to branch 'foo'. In other words, we'll no longer +be in detached HEAD state after this command. + +<2> similarly creates a new branch 'foo', which refers to commit 'f', +but leaves HEAD detached. + +<3> creates a new tag 'foo', which refers to commit 'f', +leaving HEAD detached. + +If we have moved away from commit 'f', then we must first recover its object +name (typically by using git reflog), and then we can create a reference to +it. For example, to see the last two commits to which HEAD referred, we +can use either of these commands: + +------------ +$ git reflog -2 HEAD # or +$ git log -g -2 HEAD +------------ EXAMPLES -------- @@ -315,15 +423,6 @@ $ edit frotz $ git add frotz ------------ - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 2cef579316..fed5097e00 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -7,7 +7,11 @@ git-cherry-pick - Apply the changes introduced by some existing commits SYNOPSIS -------- +[verse] 'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>... +'git cherry-pick' --continue +'git cherry-pick' --quit +'git cherry-pick' --abort DESCRIPTION ----------- @@ -16,12 +20,31 @@ Given one or more existing commits, apply the change each one introduces, recording a new commit for each. This requires your working tree to be clean (no modifications from the HEAD commit). +When it is not obvious how to apply a change, the following +happens: + +1. The current branch and `HEAD` pointer stay at the last commit + successfully made. +2. The `CHERRY_PICK_HEAD` ref is set to point at the commit that + introduced the change that is difficult to apply. +3. Paths in which the change applied cleanly are updated both + in the index file and in your working tree. +4. For conflicting paths, the index file records up to three + versions, as described in the "TRUE MERGE" section of + linkgit:git-merge[1]. The working tree files will include + a description of the conflict bracketed by the usual + conflict markers `<<<<<<<` and `>>>>>>>`. +5. No other modifications are made. + +See linkgit:git-merge[1] for some hints on resolving such +conflicts. + OPTIONS ------- <commit>...:: Commits to cherry-pick. For a more complete list of ways to spell commits, see - linkgit:gitrevisions[1]. + linkgit:gitrevisions[7]. Sets of commits can be passed but no traversal is done by default, as if the '--no-walk' option was specified, see linkgit:git-rev-list[1]. @@ -32,9 +55,10 @@ OPTIONS message prior to committing. -x:: - When recording the commit, append to the original commit - message a note that indicates which commit this change - was cherry-picked from. Append the note only for cherry + When recording the commit, append a line that says + "(cherry picked from commit ...)" to the original commit + message in order to indicate which commit this change was + cherry-picked from. This is done only for cherry picks without conflicts. Do not use this option if you are cherry-picking from your private branch because the information is useless to the recipient. If on the @@ -79,33 +103,47 @@ effect to your index in a row. cherry-pick'ed commit, then a fast forward to this commit will be performed. +--strategy=<strategy>:: + Use the given merge strategy. Should only be used once. + See the MERGE STRATEGIES section in linkgit:git-merge[1] + for details. + +-X<option>:: +--strategy-option=<option>:: + Pass the merge strategy-specific option through to the + merge strategy. See linkgit:git-merge[1] for details. + +SEQUENCER SUBCOMMANDS +--------------------- +include::sequencer.txt[] + EXAMPLES -------- -git cherry-pick master:: +`git cherry-pick master`:: Apply the change introduced by the commit at the tip of the master branch and create a new commit with this change. -git cherry-pick ..master:: -git cherry-pick ^HEAD master:: +`git cherry-pick ..master`:: +`git cherry-pick ^HEAD master`:: Apply the changes introduced by all commits that are ancestors of master but not of HEAD to produce new commits. -git cherry-pick master\~4 master~2:: +`git cherry-pick master{tilde}4 master{tilde}2`:: Apply the changes introduced by the fifth and third last commits pointed to by master and create 2 new commits with these changes. -git cherry-pick -n master~1 next:: +`git cherry-pick -n master~1 next`:: Apply to the working tree and the index the changes introduced by the second last commit pointed to by master and by the last commit pointed to by next, but do not create any commit with these changes. -git cherry-pick --ff ..next:: +`git cherry-pick --ff ..next`:: If history is linear and HEAD is an ancestor of next, update the working tree and advance the HEAD pointer to match next. @@ -113,20 +151,34 @@ git cherry-pick --ff ..next:: are in next but not HEAD to the current branch, creating a new commit for each new change. -git rev-list --reverse master \-- README | git cherry-pick -n --stdin:: +`git rev-list --reverse master \-- README | git cherry-pick -n --stdin`:: Apply the changes introduced by all commits on the master branch that touched README to the working tree and index, so the result can be inspected and made into a single new commit if suitable. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +The following sequence attempts to backport a patch, bails out because +the code the patch applies to has changed too much, and then tries +again, this time exercising more care about matching up context lines. + +------------ +$ git cherry-pick topic^ <1> +$ git diff <2> +$ git reset --merge ORIG_HEAD <3> +$ git cherry-pick -Xpatience topic^ <4> +------------ +<1> apply the change that would be shown by `git show topic^`. +In this example, the patch does not apply cleanly, so +information about the conflict is written to the index and +working tree and no new commit results. +<2> summarize changes to be reconciled +<3> cancel the cherry-pick. In other words, return to the +pre-cherry-pick state, preserving any local modifications you had in +the working tree. +<4> try to apply the change introduced by `topic^` again, +spending extra time to avoid mistakes based on incorrectly matching +context lines. SEE ALSO -------- diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index fed115acd0..f6c19c734d 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -7,6 +7,7 @@ git-cherry - Find commits not merged upstream SYNOPSIS -------- +[verse] 'git cherry' [-v] [<upstream> [<head> [<limit>]]] DESCRIPTION @@ -63,14 +64,6 @@ SEE ALSO -------- linkgit:git-patch-id[1] -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-citool.txt b/Documentation/git-citool.txt index fb2753c97e..c7a11c36c1 100644 --- a/Documentation/git-citool.txt +++ b/Documentation/git-citool.txt @@ -7,6 +7,7 @@ git-citool - Graphical alternative to git-commit SYNOPSIS -------- +[verse] 'git citool' DESCRIPTION @@ -19,14 +20,6 @@ to the less interactive 'git commit' program. 'git citool' is actually a standard alias for `git gui citool`. See linkgit:git-gui[1] for more details. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 60e38e6e27..79fb984144 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -47,12 +47,14 @@ OPTIONS -e <pattern>:: --exclude=<pattern>:: - Specify special exceptions to not be cleaned. Each <pattern> is - the same form as in $GIT_DIR/info/excludes and this option can be - given multiple times. + In addition to those found in .gitignore (per directory) and + $GIT_DIR/info/exclude, also consider these patterns to be in the + set of the ignore rules in effect. -x:: - Don't use the ignore rules. This allows removing all untracked + Don't use the standard ignore rules read from .gitignore (per + directory) and $GIT_DIR/info/exclude, but do still use the ignore + rules given with `-e` options. This allows removing all untracked files, including build products. This can be used (possibly in conjunction with 'git reset') to create a pristine working directory to test a clean build. @@ -61,12 +63,6 @@ OPTIONS Remove only files ignored by git. This may be useful to rebuild everything from scratch, but keep manually created files. - -Author ------- -Written by Pavel Roskin <proski@gnu.org> - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index dc7d3d17b1..4b8b26b75e 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -12,7 +12,9 @@ SYNOPSIS 'git clone' [--template=<template_directory>] [-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] [--mirror] [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] - [--depth <depth>] [--recursive] [--] <repository> [<directory>] + [--separate-git-dir <git dir>] + [--depth <depth>] [--recursive|--recurse-submodules] [--] <repository> + [<directory>] DESCRIPTION ----------- @@ -128,7 +130,12 @@ objects from the source repository into a pack in the cloned repository. configuration variables are created. --mirror:: - Set up a mirror of the remote repository. This implies `--bare`. + Set up a mirror of the source repository. This implies `--bare`. + Compared to `--bare`, `--mirror` not only maps local branches of the + source to local branches of the target, it maps all refs (including + remote-tracking branches, notes etc.) and sets up a refspec configuration such + that all these refs are overwritten by a `git remote update` in the + target repository. --origin <name>:: -o <name>:: @@ -152,6 +159,17 @@ objects from the source repository into a pack in the cloned repository. Specify the directory from which templates will be used; (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) +--config <key>=<value>:: +-c <key>=<value>:: + Set a configuration variable in the newly-created repository; + this takes effect immediately after the repository is + initialized, but before the remote history is fetched or any + files checked out. The key is in the same format as expected by + linkgit:git-config[1] (e.g., `core.eol=true`). If multiple + values are given for the same key, each value will be written to + the config file. This makes it safe, for example, to add + additional fetch refspecs to the origin remote. + --depth <depth>:: Create a 'shallow' clone with a history truncated to the specified number of revisions. A shallow repository has a @@ -162,6 +180,7 @@ objects from the source repository into a pack in the cloned repository. as patches. --recursive:: +--recurse-submodules:: After the clone is created, initialize all submodules within, using their default settings. This is equivalent to running `git submodule update --init --recursive` immediately after @@ -169,6 +188,14 @@ objects from the source repository into a pack in the cloned repository. repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) +--separate-git-dir=<git dir>:: + Instead of placing the cloned repository where it is supposed + to be, place the cloned repository at the specified directory, + then make a filesytem-agnostic git symbolic link to there. + The result is git repository can be separated from working + tree. + + <repository>:: The (possibly remote) repository to clone from. See the <<URLS,URLS>> section below for more information on specifying @@ -229,17 +256,6 @@ $ git clone --bare -l -s /pub/scm/.../torvalds/linux-2.6.git \ /pub/scm/.../me/subsys-2.6.git ------------ - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 349366ee1e..02133d5fc9 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -8,7 +8,8 @@ git-commit-tree - Create a new commit object SYNOPSIS -------- -'git commit-tree' <tree> [-p <parent commit>]* < changelog +[verse] +'git commit-tree' <tree> [(-p <parent commit>)...] < changelog DESCRIPTION ----------- @@ -67,7 +68,9 @@ if set: In case (some of) these environment variables are not set, the information is taken from the configuration items user.name and user.email, or, if not -present, system user name and fully qualified hostname. +present, system user name and the hostname used for outgoing mail (taken +from `/etc/mailname` and falling back to the fully qualified hostname when +that file does not exist). A commit comment is read from stdin. If a changelog entry is not provided via "<" redirection, 'git commit-tree' will just wait @@ -89,19 +92,14 @@ Discussion include::i18n.txt[] +FILES +----- +/etc/mailname + SEE ALSO -------- linkgit:git-write-tree[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 42fb1f57b2..5cc84a1391 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -8,11 +8,12 @@ git-commit - Record changes to the repository SYNOPSIS -------- [verse] -'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run] - [(-c | -C) <commit>] [-F <file> | -m <msg>] [--reset-author] - [--allow-empty] [--allow-empty-message] [--no-verify] [-e] [--author=<author>] - [--date=<date>] [--cleanup=<mode>] [--status | --no-status] [--] - [[-i | -o ]<file>...] +'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend] + [--dry-run] [(-c | -C | --fixup | --squash) <commit>] + [-F <file> | -m <msg>] [--reset-author] [--allow-empty] + [--allow-empty-message] [--no-verify] [-e] [--author=<author>] + [--date=<date>] [--cleanup=<mode>] [--status | --no-status] + [-i | -o] [--] [<file>...] DESCRIPTION ----------- @@ -39,9 +40,10 @@ The content to be added can be specified in several ways: that have been removed from the working tree, and then perform the actual commit; -5. by using the --interactive switch with the 'commit' command to decide one - by one which files should be part of the commit, before finalizing the - operation. Currently, this is done by invoking 'git add --interactive'. +5. by using the --interactive or --patch switches with the 'commit' command + to decide one by one which files or hunks should be part of the commit, + before finalizing the operation. See the ``Interactive Mode`` section of + linkgit:git-add[1] to learn how to operate these modes. The `--dry-run` option can be used to obtain a summary of what is included by any of the above for the next @@ -59,6 +61,12 @@ OPTIONS been modified and deleted, but new files you have not told git about are not affected. +-p:: +--patch:: + Use the interactive patch selection interface to chose + which changes to commit. See linkgit:git-add[1] for + details. + -C <commit>:: --reuse-message=<commit>:: Take an existing commit object, and reuse the log message @@ -70,10 +78,24 @@ OPTIONS Like '-C', but with '-c' the editor is invoked, so that the user can further edit the commit message. +--fixup=<commit>:: + Construct a commit message for use with `rebase --autosquash`. + The commit message will be the subject line from the specified + commit with a prefix of "fixup! ". See linkgit:git-rebase[1] + for details. + +--squash=<commit>:: + Construct a commit message for use with `rebase --autosquash`. + The commit message subject line is taken from the specified + commit with a prefix of "squash! ". Can be used with additional + commit message options (`-m`/`-c`/`-C`/`-F`). See + linkgit:git-rebase[1] for details. + --reset-author:: - When used with -C/-c/--amend options, declare that the - authorship of the resulting commit now belongs of the committer. - This also renews the author timestamp. + When used with -C/-c/--amend options, or when committing after a + a conflicting cherry-pick, declare that the authorship of the + resulting commit now belongs of the committer. This also renews + the author timestamp. --short:: When doing a dry-run, give the output in the short-format. See @@ -201,10 +223,11 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) -u[<mode>]:: --untracked-files[=<mode>]:: - Show untracked files (Default: 'all'). + Show untracked files. + -The mode parameter is optional, and is used to specify -the handling of untracked files. +The mode parameter is optional (defaults to 'all'), and is used to +specify the handling of untracked files; when -u is not used, the +default is 'normal', i.e. show untracked files and directories. + The possible options are: + @@ -212,9 +235,8 @@ The possible options are: - 'normal' - Shows untracked files and directories - 'all' - Also shows individual files in untracked directories. + -See linkgit:git-config[1] for configuration variable -used to change the default for when the option is not -specified. +The default can be changed using the status.showUntrackedFiles +configuration variable documented in linkgit:git-config[1]. -v:: --verbose:: @@ -262,7 +284,7 @@ When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area called the "index" with 'git add'. A file can be reverted back, only in the index but not in the working tree, -to that of the last commit with `git reset HEAD -- <file>`, +to that of the last commit with `git reset HEAD \-- <file>`, which effectively reverts 'git add' and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, @@ -383,12 +405,6 @@ linkgit:git-mv[1], linkgit:git-merge[1], linkgit:git-commit-tree[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 543dd64a46..e7ecf5d803 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -50,16 +50,18 @@ The default is to assume the config file of the current repository, .git/config unless defined otherwise with GIT_DIR and GIT_CONFIG (see <<FILES>>). -This command will fail if: +This command will fail (with exit code ret) if: -. The config file is invalid, -. Can not write to the config file, -. no section was provided, -. the section or key is invalid, -. you try to unset an option which does not exist, -. you try to unset/set an option for which multiple lines match, or -. you use '--global' option without $HOME being properly set. +. The config file is invalid (ret=3), +. can not write to the config file (ret=4), +. no section or name was provided (ret=2), +. the section or key is invalid (ret=1), +. you try to unset an option which does not exist (ret=5), +. you try to unset/set an option for which multiple lines match (ret=5), +. you try to use an invalid regexp (ret=6), or +. you use '--global' option without $HOME being properly set (ret=128). +On success, the command returns the exit code 0. OPTIONS ------- @@ -336,15 +338,6 @@ echo "${WS}your whitespace color or blue reverse${RESET}" include::config.txt[] - -Author ------- -Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> - -Documentation --------------- -Documentation by Johannes Schindelin, Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt index 6bc1c21e62..23c80cea64 100644 --- a/Documentation/git-count-objects.txt +++ b/Documentation/git-count-objects.txt @@ -7,6 +7,7 @@ git-count-objects - Count unpacked number of objects and their disk consumption SYNOPSIS -------- +[verse] 'git count-objects' [-v] DESCRIPTION @@ -25,15 +26,6 @@ OPTIONS and number of objects that can be removed by running `git prune-packed`. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt index b2696efae9..7f79cec3f8 100644 --- a/Documentation/git-cvsexportcommit.txt +++ b/Documentation/git-cvsexportcommit.txt @@ -8,6 +8,7 @@ git-cvsexportcommit - Export a single commit to a CVS checkout SYNOPSIS -------- +[verse] 'git cvsexportcommit' [-h] [-u] [-v] [-c] [-P] [-p] [-a] [-d cvsroot] [-w cvsworkdir] [-W] [-f] [-m msgprefix] [PARENTCOMMIT] COMMITID @@ -112,14 +113,6 @@ $ cd ~/project_cvs_checkout $ git cherry cvshead myhead | sed -n 's/^+ //p' | xargs -l1 git cvsexportcommit -c -p -v ------------ -Author ------- -Written by Martin Langhoff <martin@catalyst.net.nz> and others. - -Documentation --------------- -Documentation by Martin Langhoff <martin@catalyst.net.nz> and others. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 608cd63fc3..6695ab3b4b 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -217,15 +217,6 @@ more stable in practice: * cvs2git (part of cvs2svn), `http://cvs2svn.tigris.org` * parsecvs, `http://cgit.freedesktop.org/~keithp/parsecvs` -Author ------- -Written by Matthias Urlichs <smurf@smurf.noris.de>, with help from -various participants of the git-list <git@vger.kernel.org>. - -Documentation --------------- -Documentation by Matthias Urlichs <smurf@smurf.noris.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index f4472c61db..827bc988ed 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -252,7 +252,7 @@ Configuring database backend 'git-cvsserver' uses the Perl DBI module. Please also read its documentation if changing these variables, especially -about `DBI->connect()`. +about `DBI\->connect()`. gitcvs.dbname:: Database name. The exact meaning depends on the @@ -391,22 +391,6 @@ Dependencies ------------ 'git-cvsserver' depends on DBD::SQLite. -Copyright and Authors ---------------------- - -This program is copyright The Open University UK - 2006. - -Authors: - -- Martyn Smith <martyn@catalyst.net.nz> -- Martin Langhoff <martin@catalyst.net.nz> - -with ideas and patches from participants of the git-list <git@vger.kernel.org>. - -Documentation --------------- -Documentation by Martyn Smith <martyn@catalyst.net.nz>, Martin Langhoff <martin@catalyst.net.nz>, and Matthias Urlichs <smurf@smurf.noris.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 01c9f8eb9e..31b28fc29f 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -9,15 +9,15 @@ SYNOPSIS -------- [verse] 'git daemon' [--verbose] [--syslog] [--export-all] - [--timeout=n] [--init-timeout=n] [--max-connections=n] - [--strict-paths] [--base-path=path] [--base-path-relaxed] - [--user-path | --user-path=path] - [--interpolated-path=pathtemplate] - [--reuseaddr] [--detach] [--pid-file=file] - [--enable=service] [--disable=service] - [--allow-override=service] [--forbid-override=service] - [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]] - [directory...] + [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>] + [--strict-paths] [--base-path=<path>] [--base-path-relaxed] + [--user-path | --user-path=<path>] + [--interpolated-path=<pathtemplate>] + [--reuseaddr] [--detach] [--pid-file=<file>] + [--enable=<service>] [--disable=<service>] + [--allow-override=<service>] [--forbid-override=<service>] + [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>] [--user=<user> [--group=<group>]] + [<directory>...] DESCRIPTION ----------- @@ -48,7 +48,7 @@ OPTIONS 'git daemon' will refuse to start when this option is enabled and no whitelist is specified. ---base-path=path:: +--base-path=<path>:: Remap all the path requests as relative to the given path. This is sort of "GIT root" - if you run 'git daemon' with '--base-path=/srv/git' on example.com, then if you later try to pull @@ -61,7 +61,7 @@ OPTIONS This is useful for switching to --base-path usage, while still allowing the old paths. ---interpolated-path=pathtemplate:: +--interpolated-path=<pathtemplate>:: To support virtual hosting, an interpolated path template can be used to dynamically construct alternate paths. The template supports %H for the target hostname as supplied by the client but @@ -78,29 +78,31 @@ OPTIONS --inetd:: Have the server run as an inetd service. Implies --syslog. - Incompatible with --port, --listen, --user and --group options. + Incompatible with --detach, --port, --listen, --user and --group + options. ---listen=host_or_ipaddr:: +--listen=<host_or_ipaddr>:: Listen on a specific IP address or hostname. IP addresses can be either an IPv4 address or an IPv6 address if supported. If IPv6 is not supported, then --listen=hostname is also not supported and --listen must be given an IPv4 address. + Can be given more than once. Incompatible with '--inetd' option. ---port=n:: +--port=<n>:: Listen on an alternative port. Incompatible with '--inetd' option. ---init-timeout=n:: - Timeout between the moment the connection is established and the - client request is received (typically a rather low value, since +--init-timeout=<n>:: + Timeout (in seconds) between the moment the connection is established + and the client request is received (typically a rather low value, since that should be basically immediate). ---timeout=n:: - Timeout for specific client sub-requests. This includes the time - it takes for the server to process the sub-request and the time spent - waiting for the next client's request. +--timeout=<n>:: + Timeout (in seconds) for specific client sub-requests. This includes + the time it takes for the server to process the sub-request and the + time spent waiting for the next client's request. ---max-connections=n:: +--max-connections=<n>:: Maximum number of concurrent clients, defaults to 32. Set it to zero for no limit. @@ -109,7 +111,7 @@ OPTIONS --verbose, thus by default only error conditions will be logged. --user-path:: ---user-path=path:: +--user-path=<path>:: Allow {tilde}user notation to be used in requests. When specified with no parameter, requests to git://host/{tilde}alice/foo is taken as a request to access @@ -129,12 +131,12 @@ OPTIONS --detach:: Detach from the shell. Implies --syslog. ---pid-file=file:: +--pid-file=<file>:: Save the process id in 'file'. Ignored when the daemon is run under `--inetd`. ---user=user:: ---group=group:: +--user=<user>:: +--group=<group>:: Change daemon's uid and gid before entering the service loop. When only `--user` is given without `--group`, the primary group ID for the user is used. The values of @@ -145,20 +147,30 @@ Giving these options is an error when used with `--inetd`; use the facility of inet daemon to achieve the same before spawning 'git daemon' if needed. ---enable=service:: ---disable=service:: +--enable=<service>:: +--disable=<service>:: Enable/disable the service site-wide per default. Note that a service disabled site-wide can still be enabled per repository if it is marked overridable and the repository enables the service with a configuration item. ---allow-override=service:: ---forbid-override=service:: +--allow-override=<service>:: +--forbid-override=<service>:: Allow/forbid overriding the site-wide default with per repository configuration. By default, all the services are overridable. +--informative-errors:: +--no-informative-errors:: + When informative errors are turned on, git-daemon will report + more verbose errors to the client, differentiating conditions + like "no such repository" from "repository not exported". This + is more convenient for clients, but may leak information about + the existence of unexported repositories. When informative + errors are not enabled, all errors report "access denied" to the + client. The default is --no-informative-errors. + <directory>:: A directory to add to the whitelist of allowed directories. Unless --strict-paths is specified this will also include subdirectories @@ -277,17 +289,6 @@ that connected to it, if the IP address is available. REMOTE_ADDR will be available in the environment of hooks called when services are performed. - - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki -<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index 7ef9d51577..039cce2e98 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -37,7 +37,7 @@ OPTIONS --all:: Instead of using only the annotated tags, use any ref found in `.git/refs/`. This option enables matching - any known branch, remote branch, or lightweight tag. + any known branch, remote-tracking branch, or lightweight tag. --tags:: Instead of using only the annotated tags, use any tag @@ -156,17 +156,6 @@ selected and output. Here fewest commits different is defined as the number of commits which would be shown by `git log tag..input` will be the smallest number of commits possible. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, but somewhat -butchered by Junio C Hamano <gitster@pobox.com>. Later significantly -updated by Shawn Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt index 9cd8ccef37..906774f0f7 100644 --- a/Documentation/git-diff-files.txt +++ b/Documentation/git-diff-files.txt @@ -8,6 +8,7 @@ git-diff-files - Compares files in the working tree and the index SYNOPSIS -------- +[verse] 'git diff-files' [-q] [-0|-1|-2|-3|-c|--cc] [<common diff options>] [<path>...] DESCRIPTION @@ -46,15 +47,6 @@ omit diff output for unmerged entries and just show "Unmerged". include::diff-format.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index 162cb741b3..c0b7c581ad 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -8,6 +8,7 @@ git-diff-index - Compares content and mode of blobs between the index and reposi SYNOPSIS -------- +[verse] 'git diff-index' [-m] [--cached] [<common diff options>] <tree-ish> [<path>...] DESCRIPTION @@ -96,8 +97,8 @@ show that. So let's say that you have edited `kernel/sched.c`, but have not actually done a 'git update-index' on it yet - there is no "object" associated with the new state, and you get: - torvalds@ppc970:~/v2.6/linux> git diff-index HEAD - *100644->100664 blob 7476bb......->000000...... kernel/sched.c + torvalds@ppc970:~/v2.6/linux> git diff-index --abbrev HEAD + :100644 100664 7476bb... 000000... kernel/sched.c i.e., it shows that the tree has changed, and that `kernel/sched.c` has is not up-to-date and may contain new stuff. The all-zero sha1 means that to @@ -116,15 +117,6 @@ tell which file is in which state, since the "has been updated" ones show a valid sha1, and the "not in sync with the index" ones will always have the special all-zero sha1. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index a7e37b875f..1439486e40 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -138,8 +138,8 @@ so it can be used to name subdirectories. An example of normal usage is: - torvalds@ppc970:~/git> git diff-tree 5319e4...... - *100664->100664 blob ac348b.......->a01513....... git-fsck-objects.c + torvalds@ppc970:~/git> git diff-tree --abbrev 5319e4 + :100664 100664 ac348b... a01513... git-fsck-objects.c which tells you that the last commit changed just one file (it's from this one: @@ -162,15 +162,6 @@ in case you care). include::diff-format.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 08fd4099ad..f8d0819113 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -8,12 +8,17 @@ git-diff - Show changes between commits, commit and working tree, etc SYNOPSIS -------- -'git diff' [<common diff options>] <commit>{0,2} [--] [<path>...] +[verse] +'git diff' [options] [<commit>] [--] [<path>...] +'git diff' [options] --cached [<commit>] [--] [<path>...] +'git diff' [options] <commit> <commit> [--] [<path>...] +'git diff' [options] [--no-index] [--] <path> <path> DESCRIPTION ----------- -Show changes between two trees, a tree and the working tree, a -tree and the index file, or the index file and the working tree. +Show changes between the working tree and the index or a tree, changes +between the index and a tree, changes between two trees, or changes +between two files on disk. 'git diff' [--options] [--] [<path>...]:: @@ -23,9 +28,9 @@ tree and the index file, or the index file and the working tree. further add to the index but you still haven't. You can stage these changes by using linkgit:git-add[1]. + -If exactly two paths are given, and at least one is untracked, -compare the two files / directories. This behavior can be -forced by --no-index. +If exactly two paths are given and at least one points outside +the current repository, 'git diff' will compare the two files / +directories. This behavior can be forced by --no-index. 'git diff' [--options] --cached [<commit>] [--] [<path>...]:: @@ -33,6 +38,8 @@ forced by --no-index. commit relative to the named <commit>. Typically you would want comparison with the latest commit, so if you do not give <commit>, it defaults to HEAD. + If HEAD does not exist (e.g. unborned branches) and + <commit> is not given, it shows all staged changes. --staged is a synonym of --cached. 'git diff' [--options] <commit> [--] [<path>...]:: @@ -64,15 +71,16 @@ forced by --no-index. Just in case if you are doing something exotic, it should be noted that all of the <commit> in the above description, except -for the last two forms that use ".." notations, can be any -<tree-ish>. +in the last two forms that use ".." notations, can be any +<tree>. The third form ('git diff <commit> <commit>') can also +be used to compare two <blob> objects. For a more complete list of ways to spell <commit>, see -"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[7]. However, "diff" is about comparing two _endpoints_, not ranges, and the range notations ("<commit>..<commit>" and "<commit>\...<commit>") do not mean a range as defined in the -"SPECIFYING RANGES" section in linkgit:gitrevisions[1]. +"SPECIFYING RANGES" section in linkgit:gitrevisions[7]. OPTIONS ------- @@ -159,16 +167,12 @@ rewrites (very expensive). SEE ALSO -------- -linkgit:git-difftool[1]:: - Show changes using common diff tools - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +diff(1), +linkgit:git-difftool[1], +linkgit:git-log[1], +linkgit:gitdiffcore[7], +linkgit:git-format-patch[1], +linkgit:git-apply[1] GIT --- diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 8250bad2ce..19d473c070 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -7,13 +7,15 @@ git-difftool - Show changes using common diff tools SYNOPSIS -------- -'git difftool' [<options>] <commit>{0,2} [--] [<path>...] +[verse] +'git difftool' [<options>] [<commit> [<commit>]] [--] [<path>...] DESCRIPTION ----------- 'git difftool' is a git command that allows you to compare and edit files between revisions using common diff tools. 'git difftool' is a frontend -to 'git diff' and accepts the same options and arguments. +to 'git diff' and accepts the same options and arguments. See +linkgit:git-diff[1]. OPTIONS ------- @@ -29,9 +31,9 @@ OPTIONS -t <tool>:: --tool=<tool>:: Use the diff tool specified by <tool>. - Valid merge tools are: - kdiff3, kompare, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, - ecmerge, diffuse, opendiff, p4merge and araxis. + Valid diff tools are: + araxis, bc3, diffuse, emerge, ecmerge, gvimdiff, kdiff3, + kompare, meld, opendiff, p4merge, tkdiff, vimdiff and xxdiff. + If a diff tool is not specified, 'git difftool' will use the configuration variable `diff.tool`. If the @@ -55,14 +57,16 @@ the configured command line will be invoked with the following variables available: `$LOCAL` is set to the name of the temporary file containing the contents of the diff pre-image and `$REMOTE` is set to the name of the temporary file containing the contents -of the diff post-image. `$BASE` is provided for compatibility -with custom merge tool commands and has the same value as `$LOCAL`. +of the diff post-image. `$MERGED` is the name of the file which is +being compared. `$BASE` is provided for compatibility +with custom merge tool commands and has the same value as `$MERGED`. -x <command>:: --extcmd=<command>:: Specify a custom command for viewing diffs. 'git-difftool' ignores the configured defaults and runs `$command $LOCAL $REMOTE` when this option is specified. + Additionally, `$BASE` is set in the environment. -g:: --gui:: @@ -106,15 +110,6 @@ linkgit:git-mergetool[1]:: linkgit:git-config[1]:: Get and set repository or global options - -AUTHOR ------- -Written by David Aguilar <davvid@gmail.com>. - -Documentation --------------- -Documentation by David Aguilar and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index fcad113276..f37eada63a 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -8,6 +8,7 @@ git-fast-export - Git data exporter SYNOPSIS -------- +[verse] 'git fast-export [options]' | 'git fast-import' DESCRIPTION @@ -82,6 +83,10 @@ marks the same across runs. allow that. So fake a tagger to be able to fast-import the output. +--use-done-feature:: + Start the stream with a 'feature done' stanza, and terminate + it with a 'done' command. + --no-data:: Skip output of blob objects and instead refer to blobs via their original SHA-1 hash. This is useful when rewriting the @@ -96,7 +101,7 @@ marks the same across runs. in the commit (as opposed to just listing the files which are different from the commit's first parent). -[git-rev-list-args...]:: +[<git-rev-list-args>...]:: A list of arguments, acceptable to 'git rev-parse' and 'git rev-list', that specifies the specific objects and references to export. For example, `master{tilde}10..master` causes the @@ -135,15 +140,6 @@ Since 'git fast-import' cannot tag trees, you will not be able to export the linux-2.6.git repository completely, as it contains a tag referencing a tree instead of a commit. - -Author ------- -Written by Johannes E. Schindelin <johannes.schindelin@gmx.de>. - -Documentation --------------- -Documentation by Johannes E. Schindelin <johannes.schindelin@gmx.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 966ba4f213..ec6ef31197 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -8,6 +8,7 @@ git-fast-import - Backend for fast Git data importers SYNOPSIS -------- +[verse] frontend | 'git fast-import' [options] DESCRIPTION @@ -78,8 +79,12 @@ OPTIONS set of marks. If a mark is defined to different values, the last file wins. +--import-marks-if-exists=<file>:: + Like --import-marks but instead of erroring out, silently + skips the file if it does not exist. + --relative-marks:: - After specifying --relative-marks= the paths specified + After specifying --relative-marks the paths specified with --import-marks= and --export-marks= are relative to an internal directory in the current repository. In git-fast-import this means that the paths are relative @@ -89,9 +94,20 @@ OPTIONS --no-relative-marks:: Negates a previous --relative-marks. Allows for combining relative and non-relative marks by interweaving - --(no-)-relative-marks= with the --(import|export)-marks= + --(no-)-relative-marks with the --(import|export)-marks= options. +--cat-blob-fd=<fd>:: + Specify the file descriptor that will be written to + when the `cat-blob` command is encountered in the stream. + The default behaviour is to write to `stdout`. + +--done:: + Require a `done` command at the end of the stream. + This option might be useful for detecting errors that + cause the frontend to terminate before it has started to + write a stream. + --export-pack-edges=<file>:: After creating a packfile, print a line of data to <file> listing the filename of the packfile and the last @@ -187,7 +203,8 @@ especially when a higher level language such as Perl, Python or Ruby is being used. fast-import is very strict about its input. Where we say SP below we mean -*exactly* one space. Likewise LF means one (and only one) linefeed. +*exactly* one space. Likewise LF means one (and only one) linefeed +and HT one (and only one) horizontal tab. Supplying additional whitespace characters will cause unexpected results, such as branch names or file names with leading or trailing spaces in their name, or early termination of fast-import when it encounters @@ -320,6 +337,21 @@ and control the current import process. More detailed discussion standard output. This command is optional and is not needed to perform an import. +`done`:: + Marks the end of the stream. This command is optional + unless the `done` feature was requested using the + `--done` command line option or `feature done` command. + +`cat-blob`:: + Causes fast-import to print a blob in 'cat-file --batch' + format to the file descriptor set with `--cat-blob-fd` or + `stdout` if unspecified. + +`ls`:: + Causes fast-import to print a line describing a directory + entry in 'ls-tree' format to the file descriptor set with + `--cat-blob-fd` or `stdout` if unspecified. + `feature`:: Require that fast-import supports the specified feature, or abort if it does not. @@ -393,8 +425,8 @@ Here `<name>` is the person's display name (for example (``cm@example.com''). `LT` and `GT` are the literal less-than (\x3c) and greater-than (\x3e) symbols. These are required to delimit the email address from the other fields in the line. Note that -`<name>` is free-form and may contain any sequence of bytes, except -`LT` and `LF`. It is typically UTF-8 encoded. +`<name>` and `<email>` are free-form and may contain any sequence +of bytes, except `LT`, `GT` and `LF`. `<name>` is typically UTF-8 encoded. The time of the change is specified by `<when>` using the date format that was selected by the \--date-format=<fmt> command line option. @@ -439,7 +471,7 @@ Marks must be declared (via `mark`) before they can be used. * A complete 40 byte or abbreviated commit SHA-1 in hex. * Any valid Git SHA-1 expression that resolves to a commit. See - ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[1] for details. + ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[7] for details. The special case of restarting an incremental import from the current branch value should be written as: @@ -532,6 +564,8 @@ The value of `<path>` must be in canonical form. That is it must not: * contain the special component `.` or `..` (e.g. `foo/./bar` and `foo/../bar` are invalid). +The root of the tree can be represented by an empty string as `<path>`. + It is recommended that `<path>` always be encoded using UTF-8. `filedelete` @@ -626,9 +660,14 @@ paths for a commit are encouraged to do so. `notemodify` ^^^^^^^^^^^^ -Included in a `commit` command to add a new note (annotating a given -commit) or change the content of an existing note. This command has -two different means of specifying the content of the note. +Included in a `commit` `<notes_ref>` command to add a new note +annotating a `<committish>` or change this annotation contents. +Internally it is similar to filemodify 100644 on `<committish>` +path (maybe split into subdirectories). It's not advised to +use any other commands to write to the `<notes_ref>` tree except +`filedeleteall` to delete all existing notes in this tree. +This command has two different means of specifying the content +of the note. External data format:: The data content for the note was already supplied by a prior @@ -876,34 +915,132 @@ Placing a `progress` command immediately after a `checkpoint` will inform the reader when the `checkpoint` has been completed and it can safely access the refs that fast-import updated. -`feature` -~~~~~~~~~ -Require that fast-import supports the specified feature, or abort if -it does not. +`cat-blob` +~~~~~~~~~~ +Causes fast-import to print a blob to a file descriptor previously +arranged with the `--cat-blob-fd` argument. The command otherwise +has no impact on the current import; its main purpose is to +retrieve blobs that may be in fast-import's memory but not +accessible from the target repository. .... - 'feature' SP <feature> LF + 'cat-blob' SP <dataref> LF .... -The <feature> part of the command may be any string matching -^[a-zA-Z][a-zA-Z-]*$ and should be understood by fast-import. +The `<dataref>` can be either a mark reference (`:<idnum>`) +set previously or a full 40-byte SHA-1 of a Git blob, preexisting or +ready to be written. -Feature work identical as their option counterparts with the -exception of the import-marks feature, see below. +Output uses the same format as `git cat-file --batch`: -The following features are currently supported: +==== + <sha1> SP 'blob' SP <size> LF + <contents> LF +==== -* date-format -* import-marks -* export-marks -* relative-marks -* no-relative-marks -* force +This command can be used anywhere in the stream that comments are +accepted. In particular, the `cat-blob` command can be used in the +middle of a commit but not in the middle of a `data` command. + +`ls` +~~~~ +Prints information about the object at a path to a file descriptor +previously arranged with the `--cat-blob-fd` argument. This allows +printing a blob from the active commit (with `cat-blob`) or copying a +blob or tree from a previous commit for use in the current one (with +`filemodify`). + +The `ls` command can be used anywhere in the stream that comments are +accepted, including the middle of a commit. + +Reading from the active commit:: + This form can only be used in the middle of a `commit`. + The path names a directory entry within fast-import's + active commit. The path must be quoted in this case. ++ +.... + 'ls' SP <path> LF +.... + +Reading from a named tree:: + The `<dataref>` can be a mark reference (`:<idnum>`) or the + full 40-byte SHA-1 of a Git tag, commit, or tree object, + preexisting or waiting to be written. + The path is relative to the top level of the tree + named by `<dataref>`. ++ +.... + 'ls' SP <dataref> SP <path> LF +.... -The import-marks behaves differently from when it is specified as -commandline option in that only one "feature import-marks" is allowed -per stream. Also, any --import-marks= specified on the commandline -will override those from the stream (if any). +See `filemodify` above for a detailed description of `<path>`. + +Output uses the same format as `git ls-tree <tree> {litdd} <path>`: + +==== + <mode> SP ('blob' | 'tree' | 'commit') SP <dataref> HT <path> LF +==== + +The <dataref> represents the blob, tree, or commit object at <path> +and can be used in later 'cat-blob', 'filemodify', or 'ls' commands. + +If there is no file or subtree at that path, 'git fast-import' will +instead report + +==== + missing SP <path> LF +==== + +`feature` +~~~~~~~~~ +Require that fast-import supports the specified feature, or abort if +it does not. + +.... + 'feature' SP <feature> ('=' <argument>)? LF +.... + +The <feature> part of the command may be any one of the following: + +date-format:: +export-marks:: +relative-marks:: +no-relative-marks:: +force:: + Act as though the corresponding command-line option with + a leading '--' was passed on the command line + (see OPTIONS, above). + +import-marks:: +import-marks-if-exists:: + Like --import-marks except in two respects: first, only one + "feature import-marks" or "feature import-marks-if-exists" + command is allowed per stream; second, an --import-marks= + or --import-marks-if-exists command-line option overrides + any of these "feature" commands in the stream; third, + "feature import-marks-if-exists" like a corresponding + command-line option silently skips a nonexistent file. + +cat-blob:: +ls:: + Require that the backend support the 'cat-blob' or 'ls' command. + Versions of fast-import not supporting the specified command + will exit with a message indicating so. + This lets the import error out early with a clear message, + rather than wasting time on the early part of an import + before the unsupported command is detected. + +notes:: + Require that the backend support the 'notemodify' (N) + subcommand to the 'commit' command. + Versions of fast-import not supporting notes will exit + with a message indicating so. + +done:: + Error out if the stream ends without a 'done' command. + Without this feature, errors causing the frontend to end + abruptly at a convenient point in the stream can go + undetected. `option` ~~~~~~~~ @@ -930,8 +1067,18 @@ not be passed as option: * date-format * import-marks * export-marks +* cat-blob-fd * force +`done` +~~~~~~ +If the `done` feature is not in use, treated as if EOF was read. +This can be used to tell fast-import to finish early. + +If the `--done` command line option or `feature done` command is +in use, the `done` command is mandatory and marks the end of the +stream. + Crash Reports ------------- If fast-import is supplied invalid input it will terminate with a @@ -1230,14 +1377,13 @@ and lazy loading of subtrees, allows fast-import to efficiently import projects with 2,000+ branches and 45,114+ files in a very limited memory footprint (less than 2.7 MiB per active branch). - -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. +Signals +------- +Sending *SIGUSR1* to the 'git fast-import' process ends the current +packfile early, simulating a `checkpoint` command. The impatient +operator can use this facility to peek at the objects and refs from an +import in progress, at the cost of some added running time and worse +compression. GIT --- diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 4a8487c154..ed1bdaacd1 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -8,6 +8,7 @@ git-fetch-pack - Receive missing objects from another repository SYNOPSIS -------- +[verse] 'git fetch-pack' [--all] [--quiet|-q] [--keep|-k] [--thin] [--include-tag] [--upload-pack=<git-upload-pack>] [--depth=<n>] [--no-progress] [-v] [<host>:]<directory> [<refs>...] DESCRIPTION @@ -90,15 +91,6 @@ OPTIONS $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index 400fe7f956..b41d7c1de1 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -8,12 +8,10 @@ git-fetch - Download objects and refs from another repository SYNOPSIS -------- +[verse] 'git fetch' [<options>] [<repository> [<refspec>...]] - 'git fetch' [<options>] <group> - -'git fetch' --multiple [<options>] [<repository> | <group>]... - +'git fetch' --multiple [<options>] [(<repository> | <group>)...] 'git fetch' --all [<options>] @@ -26,7 +24,7 @@ The ref names and their object names of fetched refs are stored in `.git/FETCH_HEAD`. This information is left for a later merge operation done by 'git merge'. -When <refspec> stores the fetched result in tracking branches, +When <refspec> stores the fetched result in remote-tracking branches, the tags that point at these branches are automatically followed. This is done by first fetching from the remote using the given <refspec>s, and if the repository has objects that are @@ -34,7 +32,7 @@ pointed by remote tags that it does not yet have, then fetch those missing tags. If the other end has tags that point at branches you are not interested in, you will not get them. -'git fetch' can fetch from either a single named repository, or +'git fetch' can fetch from either a single named repository, or from several repositories at once if <group> is given and there is a remotes.<group> entry in the configuration file. (See linkgit:git-config[1]). @@ -76,20 +74,19 @@ The `pu` branch will be updated even if it is does not fast-forward, because it is prefixed with a plus sign; `tmp` will not be. +BUGS +---- +Using --recurse-submodules can only fetch new commits in already checked +out submodules right now. When e.g. upstream added a new submodule in the +just fetched commits of the superproject the submodule itself can not be +fetched, making it impossible to check out that submodule later without +having to do a fetch again. This is expected to be fixed in a future git +version. + SEE ALSO -------- linkgit:git-pull[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - -Documentation -------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 7357c8879a..0f2f117383 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -32,8 +32,9 @@ changes, which would normally have no effect. Nevertheless, this may be useful in the future for compensating for some git bugs or such, therefore such a usage is permitted. -*NOTE*: This command honors `.git/info/grafts`. If you have any grafts -defined, running this command will make them permanent. +*NOTE*: This command honors `.git/info/grafts` and `.git/refs/replace/`. +If you have any grafts or replacement refs defined, running this command +will make them permanent. *WARNING*! The rewritten history will have different object names for all the objects and will not converge with the original branch. You will not @@ -81,7 +82,7 @@ OPTIONS This filter may be used if you only need to modify the environment in which the commit will be performed. Specifically, you might want to rewrite the author/committer name/email/time environment - variables (see linkgit:git-commit[1] for details). Do not forget + variables (see linkgit:git-commit-tree[1] for details). Do not forget to re-export the variables. --tree-filter <command>:: @@ -117,7 +118,7 @@ OPTIONS This is the filter for performing the commit. If this filter is specified, it will be called instead of the 'git commit-tree' command, with arguments of the form - "<TREE_ID> [-p <PARENT_COMMIT_ID>]..." and the log message on + "<TREE_ID> [(-p <PARENT_COMMIT_ID>)...]" and the log message on stdin. The commit id is expected on stdout. + As a special extension, the commit filter may emit multiple @@ -361,7 +362,7 @@ git filter-branch --index-filter \ 'git ls-files -s | sed "s-\t\"*-&newsubdir/-" | GIT_INDEX_FILE=$GIT_INDEX_FILE.new \ git update-index --index-info && - mv $GIT_INDEX_FILE.new $GIT_INDEX_FILE' HEAD + mv "$GIT_INDEX_FILE.new" "$GIT_INDEX_FILE"' HEAD --------------------------------------------------------------- @@ -405,16 +406,6 @@ warned. (or if your git-gc is not new enough to support arguments to `\--prune`, use `git repack -ad; git prune` instead). - -Author ------- -Written by Petr "Pasky" Baudis <pasky@suse.cz>, -and the git list <git@vger.kernel.org> - -Documentation --------------- -Documentation by Petr Baudis and the git list. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index 302f56b889..32aff954a2 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -9,8 +9,8 @@ git-fmt-merge-msg - Produce a merge commit message SYNOPSIS -------- [verse] -'git fmt-merge-msg' [-m <message>] [--log | --no-log] <$GIT_DIR/FETCH_HEAD -'git fmt-merge-msg' [-m <message>] [--log | --no-log] -F <file> +'git fmt-merge-msg' [-m <message>] [--log[=<n>] | --no-log] <$GIT_DIR/FETCH_HEAD +'git fmt-merge-msg' [-m <message>] [--log[=<n>] | --no-log] -F <file> DESCRIPTION ----------- @@ -24,10 +24,12 @@ automatically invoking 'git merge'. OPTIONS ------- ---log:: +--log[=<n>]:: In addition to branch names, populate the log message with one-line descriptions from the actual commits that are being - merged. + merged. At most <n> commits from each merge parent will be + used (20 if <n> is omitted). This overrides the `merge.log` + configuration variable. --no-log:: Do not list one-line descriptions from the actual commits being @@ -52,8 +54,10 @@ CONFIGURATION ------------- merge.log:: - Whether to include summaries of merged commits in newly - merge commit messages. False by default. + In addition to branch names, populate the log message with at + most the specified number of one-line descriptions from the + actual commits that are being merged. Defaults to false, and + true is a synonym for 20. merge.summary:: Synonym to `merge.log`; this is deprecated and will be removed in @@ -63,15 +67,6 @@ SEE ALSO -------- linkgit:git-merge[1] - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index d66fd9d231..c872b883ba 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] - [--sort=<key>]* [--format=<format>] [<pattern>...] + [(--sort=<key>)...] [--format=<format>] [<pattern>...] DESCRIPTION ----------- @@ -101,9 +101,10 @@ Fields that have name-email-date tuple as its value (`author`, `committer`, and `tagger`) can be suffixed with `name`, `email`, and `date` to extract the named component. -The first line of the message in a commit and tag object is -`subject`, the remaining lines are `body`. The whole message -is `contents`. +The complete message in a commit and tag object is `contents`. +Its first line is `contents:subject`, the remaining lines +are `contents:body` and the optional GPG signature +is `contents:signature`. For sorting purposes, fields with numeric values sort in numeric order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). @@ -123,7 +124,7 @@ EXAMPLES -------- An example directly producing formatted text. Show the most recent -3 tagged commits:: +3 tagged commits: ------------ #!/bin/sh @@ -140,7 +141,7 @@ Ref: %(*refname) A simple example showing the use of shell eval on the output, -demonstrating the use of --shell. List the prefixes of all heads:: +demonstrating the use of --shell. List the prefixes of all heads: ------------ #!/bin/sh @@ -154,7 +155,7 @@ done A bit more elaborate report on tags, demonstrating that the format -may be an entire script:: +may be an entire script: ------------ #!/bin/sh @@ -204,3 +205,15 @@ eval=`git for-each-ref --shell --format="$fmt" \ refs/tags` eval "$eval" ------------ + +Author +------ +Written by Junio C Hamano <gitster@pobox.com>. + +Documentation +------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 4b3f5ba535..6ea9be775c 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -20,7 +20,7 @@ SYNOPSIS [--ignore-if-in-upstream] [--subject-prefix=Subject-Prefix] [--to=<email>] [--cc=<email>] - [--cover-letter] + [--cover-letter] [--quiet] [<common diff options>] [ <since> | <revision range> ] @@ -39,7 +39,7 @@ There are two ways to specify which commits to operate on. that leads to the <since> to be output. 2. Generic <revision range> expression (see "SPECIFYING - REVISIONS" section in linkgit:gitrevisions[1]) means the + REVISIONS" section in linkgit:gitrevisions[7]) means the commits in the specified range. The first rule takes precedence in the case of a single <commit>. To @@ -74,7 +74,7 @@ OPTIONS include::diff-options.txt[] -<n>:: - Limits the number of patches to prepare. + Prepare patches from the topmost <n> commits. -o <dir>:: --output-directory <dir>:: @@ -166,15 +166,22 @@ will want to ensure that threading is disabled for `git send-email`. --to=<email>:: Add a `To:` header to the email headers. This is in addition to any configured headers, and may be used multiple times. + The negated form `--no-to` discards all `To:` headers added so + far (from config or command line). --cc=<email>:: Add a `Cc:` header to the email headers. This is in addition to any configured headers, and may be used multiple times. + The negated form `--no-cc` discards all `Cc:` headers added so + far (from config or command line). --add-header=<header>:: Add an arbitrary header to the email headers. This is in addition to any configured headers, and may be used multiple times. - For example, `--add-header="Organization: git-foo"` + For example, `--add-header="Organization: git-foo"`. + The negated form `--no-add-header` discards *all* (`To:`, + `Cc:`, and custom) headers added so far from config or command + line. --cover-letter:: In addition to the patches, generate a cover letter file @@ -196,6 +203,9 @@ will want to ensure that threading is disabled for `git send-email`. Note that the leading character does not have to be a dot; for example, you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. +--quiet:: + Do not print the names of the generated files to standard output. + --no-binary:: Do not output contents of changes in binary files, instead display a notice that those files changed. Patches generated @@ -229,6 +239,233 @@ attachments, and sign off patches with configuration variables. ------------ +DISCUSSION +---------- + +The patch produced by 'git format-patch' is in UNIX mailbox format, +with a fixed "magic" time stamp to indicate that the file is output +from format-patch rather than a real mailbox, like so: + +------------ +From 8f72bad1baf19a53459661343e21d6491c3908d3 Mon Sep 17 00:00:00 2001 +From: Tony Luck <tony.luck@intel.com> +Date: Tue, 13 Jul 2010 11:42:54 -0700 +Subject: [PATCH] =?UTF-8?q?[IA64]=20Put=20ia64=20config=20files=20on=20the=20?= + =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig=20diet?= +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +arch/arm config files were slimmed down using a python script +(See commit c2330e286f68f1c408b4aa6515ba49d57f05beae comment) + +Do the same for ia64 so we can have sleek & trim looking +... +------------ + +Typically it will be placed in a MUA's drafts folder, edited to add +timely commentary that should not go in the changelog after the three +dashes, and then sent as a message whose body, in our example, starts +with "arch/arm config files were...". On the receiving end, readers +can save interesting patches in a UNIX mailbox and apply them with +linkgit:git-am[1]. + +When a patch is part of an ongoing discussion, the patch generated by +'git format-patch' can be tweaked to take advantage of the 'git am +--scissors' feature. After your response to the discussion comes a +line that consists solely of "`-- >8 --`" (scissors and perforation), +followed by the patch with unnecessary header fields removed: + +------------ +... +> So we should do such-and-such. + +Makes sense to me. How about this patch? + +-- >8 -- +Subject: [IA64] Put ia64 config files on the Uwe Kleine-König diet + +arch/arm config files were slimmed down using a python script +... +------------ + +When sending a patch this way, most often you are sending your own +patch, so in addition to the "`From $SHA1 $magic_timestamp`" marker you +should omit `From:` and `Date:` lines from the patch file. The patch +title is likely to be different from the subject of the discussion the +patch is in response to, so it is likely that you would want to keep +the Subject: line, like the example above. + +Checking for patch corruption +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Many mailers if not set up properly will corrupt whitespace. Here are +two common types of corruption: + +* Empty context lines that do not have _any_ whitespace. + +* Non-empty context lines that have one extra whitespace at the + beginning. + +One way to test if your MUA is set up correctly is: + +* Send the patch to yourself, exactly the way you would, except + with To: and Cc: lines that do not contain the list and + maintainer address. + +* Save that patch to a file in UNIX mailbox format. Call it a.patch, + say. + +* Apply it: + + $ git fetch <project> master:test-apply + $ git checkout test-apply + $ git reset --hard + $ git am a.patch + +If it does not apply correctly, there can be various reasons. + +* The patch itself does not apply cleanly. That is _bad_ but + does not have much to do with your MUA. You might want to rebase + the patch with linkgit:git-rebase[1] before regenerating it in + this case. + +* The MUA corrupted your patch; "am" would complain that + the patch does not apply. Look in the .git/rebase-apply/ subdirectory and + see what 'patch' file contains and check for the common + corruption patterns mentioned above. + +* While at it, check the 'info' and 'final-commit' files as well. + If what is in 'final-commit' is not exactly what you would want to + see in the commit log message, it is very likely that the + receiver would end up hand editing the log message when applying + your patch. Things like "Hi, this is my first patch.\n" in the + patch e-mail should come after the three-dash line that signals + the end of the commit message. + +MUA-SPECIFIC HINTS +------------------ +Here are some hints on how to successfully submit patches inline using +various mailers. + +GMail +~~~~~ +GMail does not have any way to turn off line wrapping in the web +interface, so it will mangle any emails that you send. You can however +use "git send-email" and send your patches through the GMail SMTP server, or +use any IMAP email client to connect to the google IMAP server and forward +the emails through that. + +For hints on using 'git send-email' to send your patches through the +GMail SMTP server, see the EXAMPLE section of linkgit:git-send-email[1]. + +For hints on submission using the IMAP interface, see the EXAMPLE +section of linkgit:git-imap-send[1]. + +Thunderbird +~~~~~~~~~~~ +By default, Thunderbird will both wrap emails as well as flag +them as being 'format=flowed', both of which will make the +resulting email unusable by git. + +There are three different approaches: use an add-on to turn off line wraps, +configure Thunderbird to not mangle patches, or use +an external editor to keep Thunderbird from mangling the patches. + +Approach #1 (add-on) +^^^^^^^^^^^^^^^^^^^^ + +Install the Toggle Word Wrap add-on that is available from +https://addons.mozilla.org/thunderbird/addon/toggle-word-wrap/ +It adds a menu entry "Enable Word Wrap" in the composer's "Options" menu +that you can tick off. Now you can compose the message as you otherwise do +(cut + paste, 'git format-patch' | 'git imap-send', etc), but you have to +insert line breaks manually in any text that you type. + +Approach #2 (configuration) +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Three steps: + +1. Configure your mail server composition as plain text: + Edit...Account Settings...Composition & Addressing, + uncheck "Compose Messages in HTML". + +2. Configure your general composition window to not wrap. ++ +In Thunderbird 2: +Edit..Preferences..Composition, wrap plain text messages at 0 ++ +In Thunderbird 3: +Edit..Preferences..Advanced..Config Editor. Search for +"mail.wrap_long_lines". +Toggle it to make sure it is set to `false`. + +3. Disable the use of format=flowed: +Edit..Preferences..Advanced..Config Editor. Search for +"mailnews.send_plaintext_flowed". +Toggle it to make sure it is set to `false`. + +After that is done, you should be able to compose email as you +otherwise would (cut + paste, 'git format-patch' | 'git imap-send', etc), +and the patches will not be mangled. + +Approach #3 (external editor) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The following Thunderbird extensions are needed: +AboutConfig from http://aboutconfig.mozdev.org/ and +External Editor from http://globs.org/articles.php?lng=en&pg=8 + +1. Prepare the patch as a text file using your method of choice. + +2. Before opening a compose window, use Edit->Account Settings to + uncheck the "Compose messages in HTML format" setting in the + "Composition & Addressing" panel of the account to be used to + send the patch. + +3. In the main Thunderbird window, 'before' you open the compose + window for the patch, use Tools->about:config to set the + following to the indicated values: ++ +---------- + mailnews.send_plaintext_flowed => false + mailnews.wraplength => 0 +---------- + +4. Open a compose window and click the external editor icon. + +5. In the external editor window, read in the patch file and exit + the editor normally. + +Side note: it may be possible to do step 2 with +about:config and the following settings but no one's tried yet. + +---------- + mail.html_compose => false + mail.identity.default.compose_html => false + mail.identity.id?.compose_html => false +---------- + +There is a script in contrib/thunderbird-patch-inline which can help +you include patches with Thunderbird in an easy way. To use it, do the +steps above and then use the script as the external editor. + +KMail +~~~~~ +This should help you to submit patches inline using KMail. + +1. Prepare the patch as a text file. + +2. Click on New Mail. + +3. Go under "Options" in the Composer window and be sure that + "Word wrap" is not set. + +4. Use Message -> Insert file... and insert the patch. + +5. Back in the compose window: add whatever other text you wish to the + message, complete the addressing and subject fields, and press send. + + EXAMPLES -------- @@ -278,15 +515,6 @@ SEE ALSO -------- linkgit:git-am[1], linkgit:git-send-email[1] - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fsck-objects.txt b/Documentation/git-fsck-objects.txt index 965a8279c1..eec4bdb600 100644 --- a/Documentation/git-fsck-objects.txt +++ b/Documentation/git-fsck-objects.txt @@ -8,6 +8,7 @@ git-fsck-objects - Verifies the connectivity and validity of the objects in the SYNOPSIS -------- +[verse] 'git fsck-objects' ... DESCRIPTION @@ -15,3 +16,7 @@ DESCRIPTION This is a synonym for linkgit:git-fsck[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 3ad48a6336..0a17b4258e 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -10,7 +10,8 @@ SYNOPSIS -------- [verse] 'git fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs] - [--[no-]full] [--strict] [--verbose] [--lost-found] [<object>*] + [--[no-]full] [--strict] [--verbose] [--lost-found] + [--[no-]progress] [<object>*] DESCRIPTION ----------- @@ -26,7 +27,7 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless --no-reflogs is given) as heads. --unreachable:: - Print out objects that exist but that aren't readable from any + Print out objects that exist but that aren't reachable from any of the reference nodes. --root:: @@ -72,11 +73,19 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless a blob, the contents are written into the file, rather than its object name. +--progress:: +--no-progress:: + Progress status is reported on the standard error stream by + default when it is attached to a terminal, unless + --no-progress or --verbose is specified. --progress forces + progress status even if the standard error stream is not + directed to a terminal. + It tests SHA1 and general object sanity, and it does full tracking of the resulting reachability and everything else. It prints out any corruption it finds (missing or bad objects), and if you use the '--unreachable' flag it will also print out objects that exist but -that aren't readable from any of the specified head nodes. +that aren't reachable from any of the specified head nodes. So for example @@ -123,9 +132,6 @@ dangling <type> <object>:: The <type> object <object>, is present in the database but never 'directly' used. A dangling commit could be a root node. -warning: git-fsck: tree <tree> has full pathnames in it:: - And it shouldn't... - sha1 mismatch <object>:: The database has an object who's sha1 doesn't match the database value. @@ -143,14 +149,6 @@ GIT_INDEX_FILE:: GIT_ALTERNATE_OBJECT_DIRECTORIES:: used to specify additional object database roots (usually unset) -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 315f07ef1c..815afcb922 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -8,6 +8,7 @@ git-gc - Cleanup unnecessary files and optimize the local repository SYNOPSIS -------- +[verse] 'git gc' [--aggressive] [--auto] [--quiet] [--prune=<date> | --no-prune] DESCRIPTION @@ -89,7 +90,7 @@ are not part of the current project most users will want to expire them sooner. This option defaults to '30 days'. The above two configuration variables can be given to a pattern. For -example, this sets non-default expiry values only to remote tracking +example, this sets non-default expiry values only to remote-tracking branches: ------------ @@ -107,7 +108,7 @@ how long records of conflicted merge you have not resolved are kept. This defaults to 15 days. The optional configuration variable 'gc.packrefs' determines if -'git gc' runs 'git pack-refs'. This can be set to "nobare" to enable +'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable it within all non-bare repos or it can be set to a boolean value. This defaults to true. @@ -128,8 +129,8 @@ Notes 'git gc' tries very hard to be safe about the garbage it collects. In particular, it will keep not only objects referenced by your current set -of branches and tags, but also objects referenced by the index, remote -tracking branches, refs saved by 'git filter-branch' in +of branches and tags, but also objects referenced by the index, +remote-tracking branches, refs saved by 'git filter-branch' in refs/original/, or reflogs (which may reference commits in branches that were later amended or rewound). @@ -151,10 +152,6 @@ linkgit:git-reflog[1] linkgit:git-repack[1] linkgit:git-rerere[1] -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-get-tar-commit-id.txt b/Documentation/git-get-tar-commit-id.txt index 790af9573b..1e2a20dd26 100644 --- a/Documentation/git-get-tar-commit-id.txt +++ b/Documentation/git-get-tar-commit-id.txt @@ -8,6 +8,7 @@ git-get-tar-commit-id - Extract commit ID from an archive created using git-arch SYNOPSIS -------- +[verse] 'git get-tar-commit-id' < <tarfile> @@ -22,15 +23,6 @@ return code of 1. This can happen if <tarfile> had not been created using 'git archive' or if the first parameter of 'git archive' had been a tree ID instead of a commit ID or tag. - -Author ------- -Written by Rene Scharfe <rene.scharfe@lsrfire.ath.cx> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index dab0a78fa8..15d6711d46 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -12,7 +12,8 @@ SYNOPSIS 'git grep' [-a | --text] [-I] [-i | --ignore-case] [-w | --word-regexp] [-v | --invert-match] [-h|-H] [--full-name] [-E | --extended-regexp] [-G | --basic-regexp] - [-F | --fixed-strings] [-n] + [-P | --perl-regexp] + [-F | --fixed-strings] [-n | --line-number] [-l | --files-with-matches] [-L | --files-without-match] [(-O | --open-files-in-pager) [<pager>]] [-z | --null] @@ -22,7 +23,7 @@ SYNOPSIS [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] - [--cached | --no-index | <tree>...] + [ [--exclude-standard] [--cached | --no-index | --untracked] | <tree>...] [--] [<pathspec>...] DESCRIPTION @@ -31,6 +32,16 @@ Look for specified patterns in the tracked files in the work tree, blobs registered in the index file, or blobs in given tree objects. +CONFIGURATION +------------- + +grep.lineNumber:: + If set to true, enable '-n' option by default. + +grep.extendedRegexp:: + If set to true, enable '--extended-regexp' option by default. + + OPTIONS ------- --cached:: @@ -38,7 +49,20 @@ OPTIONS blobs registered in the index file. --no-index:: - Search files in the current directory, not just those tracked by git. + Search files in the current directory that is not managed by git. + +--untracked:: + In addition to searching in the tracked files in the working + tree, search also in untracked files. + +--no-exclude-standard:: + Also search in ignored files by not honoring the `.gitignore` + mechanism. Only useful with `--untracked`. + +--exclude-standard:: + Do not pay attention to ignored files specified via the `.gitignore` + mechanism. Only useful when searching files in the current directory + with `--no-index`. -a:: --text:: @@ -87,12 +111,18 @@ OPTIONS Use POSIX extended/basic regexp for patterns. Default is to use basic regexp. +-P:: +--perl-regexp:: + Use Perl-compatible regexp for patterns. Requires libpcre to be + compiled in. + -F:: --fixed-strings:: Use fixed strings for patterns (don't interpret pattern as a regex). -n:: +--line-number:: Prefix the line number to matching lines. -l:: @@ -131,14 +161,12 @@ OPTIONS gives the default to color output. Same as `--color=never`. --[ABC] <context>:: - Show `context` trailing (`A` -- after), or leading (`B` - -- before), or both (`C` -- context) lines, and place a - line containing `--` between contiguous groups of - matches. +--break:: + Print an empty line between matches from different files. --<num>:: - A shortcut for specifying `-C<num>`. +--heading:: + Show the filename above the matches in that file instead of + at the start of each shown line. -p:: --show-function:: @@ -148,6 +176,29 @@ OPTIONS patch hunk headers (see 'Defining a custom hunk-header' in linkgit:gitattributes[5]). +-<num>:: +-C <num>:: +--context <num>:: + Show <num> leading and trailing lines, and place a line + containing `--` between contiguous groups of matches. + +-A <num>:: +--after-context <num>:: + Show <num> trailing lines, and place a line containing + `--` between contiguous groups of matches. + +-B <num>:: +--before-context <num>:: + Show <num> leading lines, and place a line containing + `--` between contiguous groups of matches. + +-W:: +--function-context:: + Show the surrounding text from the previous line containing a + function name up to the one before the next function name, + effectively showing the whole function in which the match was + found. + -f <file>:: Read patterns from <file>, one per line. @@ -191,28 +242,18 @@ OPTIONS Examples -------- -git grep {apostrophe}time_t{apostrophe} \-- {apostrophe}*.[ch]{apostrophe}:: +`git grep {apostrophe}time_t{apostrophe} \-- {apostrophe}*.[ch]{apostrophe}`:: Looks for `time_t` in all tracked .c and .h files in the working directory and its subdirectories. -git grep -e {apostrophe}#define{apostrophe} --and \( -e MAX_PATH -e PATH_MAX \):: +`git grep -e {apostrophe}#define{apostrophe} --and \( -e MAX_PATH -e PATH_MAX \)`:: Looks for a line that has `#define` and either `MAX_PATH` or `PATH_MAX`. -git grep --all-match -e NODE -e Unexpected:: +`git grep --all-match -e NODE -e Unexpected`:: Looks for a line that has `NODE` or `Unexpected` in files that have lines that match both. -Author ------- -Originally written by Linus Torvalds <torvalds@osdl.org>, later -revamped by Junio C Hamano. - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index 2563710b56..0041994443 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -7,6 +7,7 @@ git-gui - A portable graphical interface to Git SYNOPSIS -------- +[verse] 'git gui' [<command>] [arguments] DESCRIPTION @@ -49,7 +50,7 @@ version:: Examples -------- -git gui blame Makefile:: +`git gui blame Makefile`:: Show the contents of the file 'Makefile' in the current working directory, and provide annotations for both the @@ -58,41 +59,41 @@ git gui blame Makefile:: uncommitted changes (if any) are explicitly attributed to 'Not Yet Committed'. -git gui blame v0.99.8 Makefile:: +`git gui blame v0.99.8 Makefile`:: Show the contents of 'Makefile' in revision 'v0.99.8' and provide annotations for each line. Unlike the above example the file is read from the object database and not the working directory. -git gui blame --line=100 Makefile:: +`git gui blame --line=100 Makefile`:: Loads annotations as described above and automatically scrolls the view to center on line '100'. -git gui citool:: +`git gui citool`:: Make one commit and return to the shell when it is complete. This command returns a non-zero exit code if the window was closed in any way other than by making a commit. -git gui citool --amend:: +`git gui citool --amend`:: Automatically enter the 'Amend Last Commit' mode of the interface. -git gui citool --nocommit:: +`git gui citool --nocommit`:: Behave as normal citool, but instead of making a commit simply terminate with a zero exit code. It still checks that the index does not contain any unmerged entries, so you can use it as a GUI version of linkgit:git-mergetool[1] -git citool:: +`git citool`:: Same as `git gui citool` (above). -git gui browser maint:: +`git gui browser maint`:: Show a browser for the tree of the 'maint' branch. Files selected in the browser can be viewed with the internal @@ -121,14 +122,6 @@ or or browsed online at http://repo.or.cz/w/git-gui.git/[]. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 51edeecbe5..4b0a502e8e 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -53,14 +53,6 @@ OPTIONS conversion. If the file is read from standard input then this is always implied, unless the --path option is given. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index eccd0ffd38..9e0b3f6811 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -7,6 +7,7 @@ git-help - display help information about git SYNOPSIS -------- +[verse] 'git help' [-a|--all|-i|--info|-m|--man|-w|--web] [COMMAND] DESCRIPTION @@ -171,17 +172,6 @@ $ git config --global web.browser firefox as they are probably more user specific than repository specific. See linkgit:git-config[1] for more information about this. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> and the git-list -<git@vger.kernel.org>. - -Documentation -------------- -Initial documentation was part of the linkgit:git[1] man page. -Christian Couder <chriscool@tuxfamily.org> extracted and rewrote it a -little. Maintenance is done by the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 277d9e141b..f4e0741c11 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -119,6 +119,14 @@ ScriptAliasMatch \ ScriptAlias /git/ /var/www/cgi-bin/gitweb.cgi/ ---------------------------------------------------------------- ++ +To serve multiple repositories from different linkgit:gitnamespaces[7] in a +single repository: ++ +---------------------------------------------------------------- +SetEnvIf Request_URI "^/git/([^/]*)" GIT_NAMESPACE=$1 +ScriptAliasMatch ^/git/[^/]*(.*) /usr/libexec/git-core/git-http-backend/storage.git$1 +---------------------------------------------------------------- Accelerated static Apache 2.x:: Similar to the above, but Apache can be used to return static diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt index d91cb7ff85..070cd1e6ed 100644 --- a/Documentation/git-http-fetch.txt +++ b/Documentation/git-http-fetch.txt @@ -8,12 +8,16 @@ git-http-fetch - Download from a remote git repository via HTTP SYNOPSIS -------- +[verse] 'git http-fetch' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] [--stdin] <commit> <url> DESCRIPTION ----------- Downloads a remote git repository via HTTP. +*NOTE*: use of this command without -a is deprecated. The -a +behaviour will become the default in a future release. + OPTIONS ------- commit-id:: @@ -43,14 +47,6 @@ commit-id:: Verify that everything reachable from target is fetched. Used after an earlier fetch is interrupted. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index ddf7a18dc4..2e67362bd4 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -8,6 +8,7 @@ git-http-push - Push objects over HTTP/DAV to another repository SYNOPSIS -------- +[verse] 'git http-push' [--all] [--dry-run] [--force] [--verbose] <url> <ref> [<ref>...] DESCRIPTION @@ -91,15 +92,6 @@ With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. - -Author ------- -Written by Nick Hengeveld <nickh@reactrix.com> - -Documentation --------------- -Documentation by Nick Hengeveld - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index 57aba42e66..875d2831a5 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -8,6 +8,7 @@ git-imap-send - Send a collection of patches from stdin to an IMAP folder SYNOPSIS -------- +[verse] 'git imap-send' @@ -111,6 +112,31 @@ Using direct mode with SSL: .......................... +EXAMPLE +------- +To submit patches using GMail's IMAP interface, first, edit your ~/.gitconfig +to specify your account settings: + +--------- +[imap] + folder = "[Gmail]/Drafts" + host = imaps://imap.gmail.com + user = user@gmail.com + port = 993 + sslverify = false +--------- + +You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error +that the "Folder doesn't exist". + +Once the commits are ready to be sent, run the following command: + + $ git format-patch --cover-letter -M --stdout origin/master | git imap-send + +Just make sure to disable line wrapping in the email client (GMail's web +interface will wrap lines no matter what, so you need to use a real +IMAP client). + CAUTION ------- It is still your responsibility to make sure that the email message @@ -124,13 +150,9 @@ Thunderbird in particular is known to be problematic. Thunderbird users may wish to visit this web page for more information: http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email -Author ------- -Derived from isync 1.0.1 by Mike McCormack. - -Documentation --------------- -Documentation by Mike McCormack +SEE ALSO +-------- +linkgit:git-format-patch[1], linkgit:git-send-email[1], mbox(5) GIT --- diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index f3ccc72f0d..909687fed4 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -59,10 +59,10 @@ OPTIONS the newly constructed pack and index before refs can be updated to use objects contained in the pack. ---keep='why':: +--keep=<msg>:: Like --keep create a .keep file before moving the index into its final destination, but rather than creating an empty file - place 'why' followed by an LF into the .keep file. The 'why' + place '<msg>' followed by an LF into the .keep file. The '<msg>' message can later be searched for within all .keep files to locate any which have outlived their usefulness. @@ -85,15 +85,6 @@ new .keep file was successfully created. This is useful to remove a .keep file used as a lock to prevent the race with 'git repack' mentioned above. - -Author ------- -Written by Sergey Vlasov <vsu@altlinux.ru> - -Documentation -------------- -Documentation by Sergey Vlasov - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index eba3cb4998..a21e346789 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -8,7 +8,8 @@ git-init-db - Creates an empty git repository SYNOPSIS -------- -'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] +[verse] +'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--separate-git-dir <git dir>] [--shared[=<permissions>]] DESCRIPTION @@ -16,3 +17,7 @@ DESCRIPTION This is a synonym for linkgit:git-init[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 246b07ebf9..9ac2bbaa56 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -8,9 +8,33 @@ git-init - Create an empty git repository or reinitialize an existing one SYNOPSIS -------- -'git init' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] [directory] +[verse] +'git init' [-q | --quiet] [--bare] [--template=<template_directory>] + [--separate-git-dir <git dir>] + [--shared[=<permissions>]] [directory] +DESCRIPTION +----------- + +This command creates an empty git repository - basically a `.git` +directory with subdirectories for `objects`, `refs/heads`, +`refs/tags`, and template files. An initial `HEAD` file that +references the HEAD of the master branch is also created. + +If the `$GIT_DIR` environment variable is set then it specifies a path +to use instead of `./.git` for the base of the repository. + +If the object storage directory is specified via the +`$GIT_OBJECT_DIRECTORY` environment variable then the sha1 directories +are created underneath - otherwise the default `$GIT_DIR/objects` +directory is used. + +Running 'git init' in an existing repository is safe. It will not +overwrite things that are already there. The primary reason for +rerunning 'git init' is to pick up newly added templates (or to move +the repository to another place if --separate-git-dir is given). + OPTIONS ------- @@ -31,7 +55,16 @@ current working directory. Specify the directory from which templates will be used. (See the "TEMPLATE DIRECTORY" section below.) ---shared[={false|true|umask|group|all|world|everybody|0xxx}]:: +--separate-git-dir=<git dir>:: + +Instead of initializing the repository where it is supposed to be, +place a filesytem-agnostic git symbolic link there, pointing to the +specified git path, and initialize a git repository at the path. The +result is git repository can be separated from working tree. If this +is reinitialization, the repository will be moved to the specified +path. + +--shared[=(false|true|umask|group|all|world|everybody|0xxx)]:: Specify that the git repository is to be shared amongst several users. This allows users belonging to the same group to push into that @@ -74,32 +107,6 @@ line, the command is run inside the directory (possibly after creating it). -- -DESCRIPTION ------------ -This command creates an empty git repository - basically a `.git` directory -with subdirectories for `objects`, `refs/heads`, `refs/tags`, and -template files. -An initial `HEAD` file that references the HEAD of the master branch -is also created. - -If the `$GIT_DIR` environment variable is set then it specifies a path -to use instead of `./.git` for the base of the repository. - -If the object storage directory is specified via the `$GIT_OBJECT_DIRECTORY` -environment variable then the sha1 directories are created underneath - -otherwise the default `$GIT_DIR/objects` directory is used. - -Running 'git init' in an existing repository is safe. It will not overwrite -things that are already there. The primary reason for rerunning 'git init' -is to pick up newly added templates. - -Note that 'git init' is the same as 'git init-db'. The command -was primarily meant to initialize the object database, but over -time it has become responsible for setting up the other aspects -of the repository, such as installing the default hooks and -setting the configuration variables. The old name is retained -for backward compatibility reasons. - TEMPLATE DIRECTORY ------------------ @@ -134,15 +141,6 @@ $ git add . <2> <1> prepare /path/to/my/codebase/.git directory <2> add all existing file to the index - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 7477ce8fa8..f3eef510f2 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -51,8 +51,8 @@ OPTIONS start:: --start:: - Start the httpd instance and exit. This does not generate - any of the configuration files for spawning a new instance. + Start the httpd instance and exit. Regenerate configuration files + as necessary for spawning a new instance. stop:: --stop:: @@ -62,8 +62,8 @@ stop:: restart:: --restart:: - Restart the httpd instance and exit. This does not generate - any of the configuration files for spawning a new instance. + Restart the httpd instance and exit. Regenerate configuration files + as necessary for spawning a new instance. CONFIGURATION ------------- @@ -84,13 +84,9 @@ If the configuration variable 'instaweb.browser' is not set, 'web.browser' will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. -Author ------- -Written by Eric Wong <normalperson@yhbt.net> - -Documentation --------------- -Documentation by Eric Wong <normalperson@yhbt.net>. +SEE ALSO +-------- +linkgit:gitweb[1] GIT --- diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index c213bdbdc5..249fc878ec 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -8,6 +8,7 @@ git-log - Show commit logs SYNOPSIS -------- +[verse] 'git log' [<options>] [<since>..<until>] [[\--] <path>...] DESCRIPTION @@ -25,13 +26,14 @@ OPTIONS -<n>:: Limits the number of commits to show. + Note that this is a commit limiting option, see below. <since>..<until>:: Show only commits between the named two commits. When either <since> or <until> is omitted, it defaults to `HEAD`, i.e. the tip of the current branch. For a more complete list of ways to spell <since> - and <until>, see linkgit:gitrevisions[1]. + and <until>, see linkgit:gitrevisions[7]. --follow:: Continue listing the history of a file beyond renames @@ -67,64 +69,67 @@ produced by --stat etc. its size is not included. [\--] <path>...:: - Show only commits that affect any of the specified paths. To - prevent confusion with options and branch names, paths may need - to be prefixed with "\-- " to separate them from options or - refnames. + Show only commits that are enough to explain how the files + that match the specified paths came to be. See "History + Simplification" below for details and other simplification + modes. ++ +To prevent confusion with options and branch names, paths may need to +be prefixed with "\-- " to separate them from options or refnames. + +include::rev-list-options.txt[] + +include::pretty-formats.txt[] Common diff options -~~~~~~~~~~~~~~~~~~~ +------------------- :git-log: 1 include::diff-options.txt[] -include::rev-list-options.txt[] - -include::pretty-formats.txt[] - include::diff-generate-patch.txt[] Examples -------- -git log --no-merges:: +`git log --no-merges`:: Show the whole commit history, but skip any merges -git log v2.6.12.. include/scsi drivers/scsi:: +`git log v2.6.12.. include/scsi drivers/scsi`:: Show all commits since version 'v2.6.12' that changed any file in the include/scsi or drivers/scsi subdirectories -git log --since="2 weeks ago" \-- gitk:: +`git log --since="2 weeks ago" \-- gitk`:: Show the changes during the last two weeks to the file 'gitk'. The "--" is necessary to avoid confusion with the *branch* named 'gitk' -git log --name-status release..test:: +`git log --name-status release..test`:: Show the commits that are in the "test" branch but not yet in the "release" branch, along with the list of paths each commit modifies. -git log --follow builtin-rev-list.c:: +`git log --follow builtin-rev-list.c`:: Shows the commits that changed builtin-rev-list.c, including those commits that occurred before the file was given its present name. -git log --branches --not --remotes=origin:: +`git log --branches --not --remotes=origin`:: Shows all commits that are in any of local branches but not in - any of remote tracking branches for 'origin' (what you have that + any of remote-tracking branches for 'origin' (what you have that origin doesn't). -git log master --not --remotes=*/master:: +`git log master --not --remotes=*/master`:: Shows all commits that are in local master but not in any remote repository master branches. -git log -p -m --first-parent:: +`git log -p -m --first-parent`:: Shows the history including change diffs, but only from the "main branch" perspective, skipping commits that come from merged @@ -177,17 +182,9 @@ May be an unabbreviated ref name or a glob and may be specified multiple times. A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. + -This setting can be disabled by the `--no-standard-notes` option, +This setting can be disabled by the `--no-notes` option, overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, -and supplemented by the `--show-notes` option. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. +and overridden by the `--notes=<ref>` option. GIT --- diff --git a/Documentation/git-lost-found.txt b/Documentation/git-lost-found.txt index 602b8d5d4d..c406a11001 100644 --- a/Documentation/git-lost-found.txt +++ b/Documentation/git-lost-found.txt @@ -7,6 +7,7 @@ git-lost-found - Recover lost refs that luckily have not yet been pruned SYNOPSIS -------- +[verse] 'git lost-found' DESCRIPTION @@ -67,15 +68,6 @@ $ git rev-parse not-lost-anymore 1ef2b196d909eed523d4f3c9bf54b78cdd6843c6 ------------ -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 347f447986..4b28292811 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -17,7 +17,7 @@ SYNOPSIS [--exclude-per-directory=<file>] [--exclude-standard] [--error-unmatch] [--with-tree=<tree-ish>] - [--full-name] [--abbrev] [--] [<file>]* + [--full-name] [--abbrev] [--] [<file>...] DESCRIPTION ----------- @@ -209,15 +209,6 @@ SEE ALSO -------- linkgit:git-read-tree[1], linkgit:gitignore[5] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano, Josh Triplett, and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index abe7bf9ff9..7a9b86a58a 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git ls-remote' [--heads] [--tags] [-u <exec> | --upload-pack <exec>] - <repository> <refs>... + [--exit-code] <repository> [<refs>...] DESCRIPTION ----------- @@ -36,6 +36,12 @@ OPTIONS SSH and where the SSH daemon does not use the PATH configured by the user. +--exit-code:: + Exit with status "2" when no matching refs are found in the remote + repository. Usually the command exits with status "0" to indicate + it successfully talked with the remote repository, whether it + found any matching refs. + <repository>:: Location of the repository. The shorthand defined in $GIT_DIR/branches/ can be used. Use "." (dot) to list references in @@ -67,10 +73,6 @@ EXAMPLES c5db5456ae3b0873fc659c19fafdde22313cc441 refs/tags/v0.99.2 7ceca275d047c90c0c7d5afb13ab97efdf51bd6e refs/tags/v0.99.3 -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 1f89d36800..16e87fd6dd 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -10,8 +10,8 @@ SYNOPSIS -------- [verse] 'git ls-tree' [-d] [-r] [-t] [-l] [-z] - [--name-only] [--name-status] [--full-name] [--full-tree] [--abbrev=[<n>]] - <tree-ish> [paths...] + [--name-only] [--name-status] [--full-name] [--full-tree] [--abbrev[=<n>]] + <tree-ish> [<path>...] DESCRIPTION ----------- @@ -19,11 +19,11 @@ Lists the contents of a given tree object, like what "/bin/ls -a" does in the current working directory. Note that: - the behaviour is slightly different from that of "/bin/ls" in that the - 'paths' denote just a list of patterns to match, e.g. so specifying + '<path>' denotes just a list of patterns to match, e.g. so specifying directory name (without '-r') will behave differently, and order of the arguments does not matter. - - the behaviour is similar to that of "/bin/ls" in that the 'paths' is + - the behaviour is similar to that of "/bin/ls" in that the '<path>' is taken as relative to the current working directory. E.g. when you are in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is @@ -72,7 +72,7 @@ OPTIONS Do not limit the listing to the current working directory. Implies --full-name. -paths:: +[<path>...]:: When paths are given, show them (note that this isn't really raw pathnames, but rather a list of patterns to match). Otherwise implicitly uses the root level of the tree as the sole path argument. @@ -95,18 +95,6 @@ Object size identified by <object> is given in bytes, and right-justified with minimum width of 7 characters. Object size is given only for blobs (file) entries; for other entries `-` character is used in place of size. - -Author ------- -Written by Petr Baudis <pasky@suse.cz> -Completely rewritten from scratch by Junio C Hamano <gitster@pobox.com>, -another major rewrite by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list -<git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 3ea5aad56c..51dc325748 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -8,6 +8,7 @@ git-mailinfo - Extracts patch and authorship from a single e-mail message SYNOPSIS -------- +[verse] 'git mailinfo' [-k|-b] [-u | --encoding=<encoding> | -n] [--scissors] <msg> <patch> @@ -80,17 +81,6 @@ This can enabled by default with the configuration option mailinfo.scissors. <patch>:: The patch extracted from e-mail. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index a634485281..4d1b871d96 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -7,7 +7,8 @@ git-mailsplit - Simple UNIX mbox splitter program SYNOPSIS -------- -'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [<mbox>|<Maildir>...] +[verse] +'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [(<mbox>|<Maildir>)...] DESCRIPTION ----------- @@ -46,16 +47,6 @@ OPTIONS --keep-cr:: Do not remove `\r` from lines ending with `\r\n`. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -and Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index eedef1bb1a..b295bf8330 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -9,7 +9,8 @@ git-merge-base - Find as good common ancestors as possible for a merge SYNOPSIS -------- [verse] -'git merge-base' [-a|--all] [--octopus] <commit> <commit>... +'git merge-base' [-a|--all] <commit> <commit>... +'git merge-base' [-a|--all] --octopus <commit>... 'git merge-base' --independent <commit>... DESCRIPTION @@ -22,23 +23,21 @@ that does not have any better common ancestor is a 'best common ancestor', i.e. a 'merge base'. Note that there can be more than one merge base for a pair of commits. -Unless `--octopus` is given, among the two commits to compute the merge -base from, one is specified by the first commit argument on the command -line; the other commit is a (possibly hypothetical) commit that is a merge -across all the remaining commits on the command line. As the most common -special case, specifying only two commits on the command line means -computing the merge base between the given two commits. +OPERATION MODE +-------------- + +As the most common special case, specifying only two commits on the +command line means computing the merge base between the given two commits. + +More generally, among the two commits to compute the merge base from, +one is specified by the first commit argument on the command line; +the other commit is a (possibly hypothetical) commit that is a merge +across all the remaining commits on the command line. As a consequence, the 'merge base' is not necessarily contained in each of the commit arguments if more than two commits are specified. This is different from linkgit:git-show-branch[1] when used with the `--merge-base` option. -OPTIONS -------- --a:: ---all:: - Output all merge bases for the commits, instead of just one. - --octopus:: Compute the best common ancestors of all supplied commits, in preparation for an n-way merge. This mimics the behavior @@ -51,6 +50,12 @@ OPTIONS from any other. This mimics the behavior of 'git show-branch --independent'. +OPTIONS +------- +-a:: +--all:: + Output all merge bases for the commits, instead of just one. + DISCUSSION ---------- @@ -89,6 +94,9 @@ and the result of `git merge-base A M` is '1'. Commit '2' is also a common ancestor between 'A' and 'M', but '1' is a better common ancestor, because '2' is an ancestor of '1'. Hence, '2' is not a merge base. +The result of `git merge-base --octopus A B C` is '2', because '2' is +the best common ancestor of all commits. + When the history involves criss-cross merges, there can be more than one 'best' common ancestor for two commits. For example, with this topology: @@ -102,14 +110,6 @@ both '1' and '2' are merge-bases of A and B. Neither one is better than the other (both are 'best' merge bases). When the `--all` option is not given, it is unspecified which best one is output. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - See also -------- linkgit:git-rev-list[1], diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index f334d694e0..d7db2a3737 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -76,27 +76,16 @@ OPTIONS EXAMPLES -------- -git merge-file README.my README README.upstream:: +`git merge-file README.my README README.upstream`:: combines the changes of README.my and README.upstream since README, tries to merge them and writes the result into README.my. -git merge-file -L a -L b -L c tmp/a123 tmp/b234 tmp/c345:: +`git merge-file -L a -L b -L c tmp/a123 tmp/b234 tmp/c345`:: merges tmp/a123 and tmp/c345 with the base tmp/b234, but uses labels `a` and `c` instead of `tmp/a123` and `tmp/c345`. - -Author ------- -Written by Johannes Schindelin <johannes.schindelin@gmx.de> - - -Documentation --------------- -Documentation by Johannes Schindelin and the git-list <git@vger.kernel.org>, -with parts copied from the original documentation of RCS 'merge'. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt index 921b38f183..e0df1b3340 100644 --- a/Documentation/git-merge-index.txt +++ b/Documentation/git-merge-index.txt @@ -8,6 +8,7 @@ git-merge-index - Run a merge for files needing merging SYNOPSIS -------- +[verse] 'git merge-index' [-o] [-q] <merge-program> (-a | [--] <file>*) DESCRIPTION @@ -73,15 +74,6 @@ merge once anything has returned an error (i.e., `cat` returned an error for the AA file, because it didn't exist in the original, and thus 'git merge-index' didn't even try to merge the MM thing). -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -One-shot merge by Petr Baudis <pasky@ucw.cz> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-one-file.txt b/Documentation/git-merge-one-file.txt index a163cfca69..04e803d5d3 100644 --- a/Documentation/git-merge-one-file.txt +++ b/Documentation/git-merge-one-file.txt @@ -8,6 +8,7 @@ git-merge-one-file - The standard helper program to use with git-merge-index SYNOPSIS -------- +[verse] 'git merge-one-file' DESCRIPTION @@ -15,15 +16,6 @@ DESCRIPTION This is the standard helper program to use with 'git merge-index' to resolve a merge after the trivial merge done with 'git read-tree -m'. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, -Junio C Hamano <gitster@pobox.com> and Petr Baudis <pasky@suse.cz>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-tree.txt b/Documentation/git-merge-tree.txt index f869a7f00f..c5f84b6495 100644 --- a/Documentation/git-merge-tree.txt +++ b/Documentation/git-merge-tree.txt @@ -8,6 +8,7 @@ git-merge-tree - Show three-way merge without touching index SYNOPSIS -------- +[verse] 'git merge-tree' <base-tree> <branch1> <branch2> DESCRIPTION @@ -23,14 +24,6 @@ merge results outside of the index, and stuff the results back into the index. For this reason, the output from the command omits entries that match the <branch1> tree. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 84043cc5b2..e2e6aba17e 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -11,8 +11,9 @@ SYNOPSIS [verse] 'git merge' [-n] [--stat] [--no-commit] [--squash] [-s <strategy>] [-X <strategy-option>] - [--[no-]rerere-autoupdate] [-m <msg>] <commit>... + [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...] 'git merge' <msg> HEAD <commit>... +'git merge' --abort DESCRIPTION ----------- @@ -47,6 +48,14 @@ The second syntax (<msg> `HEAD` <commit>...) is supported for historical reasons. Do not use it from the command line or in new scripts. It is the same as `git merge -m <msg> <commit>...`. +The third syntax ("`git merge --abort`") can only be run after the +merge has resulted in conflicts. 'git merge --abort' will abort the +merge process and try to reconstruct the pre-merge state. However, +if there were uncommitted changes when the merge started (and +especially if those changes were further modified after the merge +was started), 'git merge --abort' will in some cases be unable to +reconstruct the original (pre-merge) changes. Therefore: + *Warning*: Running 'git merge' with uncommitted changes is discouraged: while possible, it leaves you in a state that is hard to back out of in the case of a conflict. @@ -59,23 +68,40 @@ include::merge-options.txt[] -m <msg>:: Set the commit message to be used for the merge commit (in case one is created). - - If `--log` is specified, a shortlog of the commits being merged - will be appended to the specified message. - - The 'git fmt-merge-msg' command can be - used to give a good default for automated 'git merge' - invocations. ++ +If `--log` is specified, a shortlog of the commits being merged +will be appended to the specified message. ++ +The 'git fmt-merge-msg' command can be +used to give a good default for automated 'git merge' +invocations. --rerere-autoupdate:: --no-rerere-autoupdate:: Allow the rerere mechanism to update the index with the result of auto-conflict resolution if possible. +--abort:: + Abort the current conflict resolution process, and + try to reconstruct the pre-merge state. ++ +If there were uncommitted worktree changes present when the merge +started, 'git merge --abort' will in some cases be unable to +reconstruct these changes. It is therefore recommended to always +commit or stash your changes before running 'git merge'. ++ +'git merge --abort' is equivalent to 'git reset --merge' when +`MERGE_HEAD` is present. + <commit>...:: Commits, usually other branch heads, to merge into our branch. - You need at least one <commit>. Specifying more than one - <commit> obviously means you are trying an Octopus. + Specifying more than one commit will create a merge with + more than two parents (affectionately called an Octopus merge). ++ +If no commit is given from the command line, and if `merge.defaultToUpstream` +configuration variable is set, merge the remote tracking branches +that the current branch is configured to use as its upstream. +See also the configuration section of this manual page. PRE-MERGE CHECKS @@ -142,7 +168,7 @@ happens: i.e. matching `HEAD`. If you tried a merge which resulted in complex conflicts and -want to start over, you can recover with `git reset --merge`. +want to start over, you can recover with `git merge --abort`. HOW CONFLICTS ARE PRESENTED --------------------------- @@ -213,8 +239,8 @@ After seeing a conflict, you can do two things: * Decide not to merge. The only clean-ups you need are to reset the index file to the `HEAD` commit to reverse 2. and to clean - up working tree changes made by 2. and 3.; `git-reset --hard` can - be used for this. + up working tree changes made by 2. and 3.; `git merge --abort` + can be used for this. * Resolve the conflicts. Git will mark the conflicts in the working tree. Edit the files into shape and @@ -291,15 +317,6 @@ linkgit:git-diff[1], linkgit:git-ls-files[1], linkgit:git-add[1], linkgit:git-rm[1], linkgit:git-mergetool[1] -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mergetool--lib.txt b/Documentation/git-mergetool--lib.txt index d8df55362c..f98a41b87c 100644 --- a/Documentation/git-mergetool--lib.txt +++ b/Documentation/git-mergetool--lib.txt @@ -7,7 +7,8 @@ git-mergetool--lib - Common git merge tool shell scriptlets SYNOPSIS -------- -'TOOL_MODE=(diff|merge) . "$(git --exec-path)/git-mergetool--lib"' +[verse] +'TOOL_MODE=(diff|merge) . "$(git --exec-path)/git-mergetool{litdd}lib"' DESCRIPTION ----------- @@ -41,14 +42,6 @@ run_merge_tool:: '$MERGED', '$LOCAL', '$REMOTE', and '$BASE' must be defined for use by the merge tool. -Author ------- -Written by David Aguilar <davvid@gmail.com> - -Documentation --------------- -Documentation by David Aguilar and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index e4ed016146..2a49de7cfe 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -7,7 +7,8 @@ git-mergetool - Run merge conflict resolution tools to resolve merge conflicts SYNOPSIS -------- -'git mergetool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<file>]... +[verse] +'git mergetool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<file>...] DESCRIPTION ----------- @@ -16,9 +17,10 @@ Use `git mergetool` to run one of several merge utilities to resolve merge conflicts. It is typically run after 'git merge'. If one or more <file> parameters are given, the merge tool program will -be run to resolve differences on each file. If no <file> names are -specified, 'git mergetool' will run the merge tool program on every file -with merge conflicts. +be run to resolve differences on each file (skipping those without +conflicts). Specifying a directory will include all unresolved files in +that path. If no <file> names are specified, 'git mergetool' will run +the merge tool program on every file with merge conflicts. OPTIONS ------- @@ -26,8 +28,8 @@ OPTIONS --tool=<tool>:: Use the merge resolution program specified by <tool>. Valid merge tools are: - kdiff3, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, - diffuse, tortoisemerge, opendiff, p4merge and araxis. + araxis, bc3, diffuse, ecmerge, emerge, gvimdiff, kdiff3, + meld, opendiff, p4merge, tkdiff, tortoisemerge, vimdiff and xxdiff. + If a merge resolution program is not specified, 'git mergetool' will use the configuration variable `merge.tool`. If the @@ -82,14 +84,6 @@ Setting the `mergetool.keepBackup` configuration variable to `false` causes `git mergetool` to automatically remove the backup as files are successfully merged. -Author ------- -Written by Theodore Y Ts'o <tytso@mit.edu> - -Documentation --------------- -Documentation by Theodore Y Ts'o. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt index 8bcc11443d..65e167a5c5 100644 --- a/Documentation/git-mktag.txt +++ b/Documentation/git-mktag.txt @@ -8,6 +8,7 @@ git-mktag - Creates a tag object SYNOPSIS -------- +[verse] 'git mktag' < signature_file DESCRIPTION @@ -32,15 +33,6 @@ exists, is separated by a blank line from the header. The message part may contain a signature that git itself doesn't care about, but that can be verified with gpg. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt index 81e3326772..5c6ebdfad9 100644 --- a/Documentation/git-mktree.txt +++ b/Documentation/git-mktree.txt @@ -8,6 +8,7 @@ git-mktree - Build a tree-object from ls-tree formatted text SYNOPSIS -------- +[verse] 'git mktree' [-z] [--missing] [--batch] DESCRIPTION @@ -34,14 +35,6 @@ OPTIONS optional. Note - if the '-z' option is used, lines are terminated with NUL. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index bdcb58526e..b8db373964 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -8,6 +8,7 @@ git-mv - Move or rename a file, a directory, or a symlink SYNOPSIS -------- +[verse] 'git mv' <options>... <args>... DESCRIPTION @@ -39,17 +40,6 @@ OPTIONS --dry-run:: Do nothing; only show what would happen - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -Rewritten by Ryan Anderson <ryan@michonline.com> -Move functionality added by Josef Weidendorfer <Josef.Weidendorfer@gmx.de> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index 2108237c36..ad1d1468c9 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -70,15 +70,6 @@ Another nice thing you can do is: % git log | git name-rev --stdin ------------ - -Author ------- -Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> - -Documentation --------------- -Documentation by Johannes Schindelin. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 2981d8c5ef..e8319eac69 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -14,8 +14,12 @@ SYNOPSIS 'git notes' append [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] 'git notes' edit [<object>] 'git notes' show [<object>] -'git notes' remove [<object>] +'git notes' merge [-v | -q] [-s <strategy> ] <notes_ref> +'git notes' merge --commit [-v | -q] +'git notes' merge --abort [-v | -q] +'git notes' remove [--ignore-missing] [--stdin] [<object>...] 'git notes' prune [-n | -v] +'git notes' get-ref DESCRIPTION @@ -53,8 +57,11 @@ list:: add:: Add notes for a given object (defaults to HEAD). Abort if the - object already has notes (use `-f` to overwrite an - existing note). + object already has notes (use `-f` to overwrite existing notes). + However, if you're using `add` interactively (using an editor + to supply the notes contents), then - instead of aborting - + the existing notes will be opened in the editor (like the `edit` + subcommand). copy:: Copy the notes for the first object onto the second object. @@ -83,14 +90,34 @@ edit:: show:: Show the notes for a given object (defaults to HEAD). +merge:: + Merge the given notes ref into the current notes ref. + This will try to merge the changes made by the given + notes ref (called "remote") since the merge-base (if + any) into the current notes ref (called "local"). ++ +If conflicts arise and a strategy for automatically resolving +conflicting notes (see the -s/--strategy option) is not given, +the "manual" resolver is used. This resolver checks out the +conflicting notes in a special worktree (`.git/NOTES_MERGE_WORKTREE`), +and instructs the user to manually resolve the conflicts there. +When done, the user can either finalize the merge with +'git notes merge --commit', or abort the merge with +'git notes merge --abort'. + remove:: - Remove the notes for a given object (defaults to HEAD). - This is equivalent to specifying an empty note message to + Remove the notes for given objects (defaults to HEAD). When + giving zero or one object from the command line, this is + equivalent to specifying an empty note message to the `edit` subcommand. prune:: Remove all notes for non-existing/unreachable objects. +get-ref:: + Print the current notes ref. This provides an easy way to + retrieve the current notes ref (e.g. from scripts). + OPTIONS ------- -f:: @@ -115,8 +142,9 @@ OPTIONS -C <object>:: --reuse-message=<object>:: - Take the note message from the given blob object (for - example, another note). + Take the given blob object (for example, another note) as the + note message. (Use `git notes copy <object>` instead to + copy notes between objects.) -c <object>:: --reedit-message=<object>:: @@ -128,14 +156,51 @@ OPTIONS 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref is taken to be in `refs/notes/` if it is not qualified. +--ignore-missing:: + Do not consider it an error to request removing notes from an + object that does not have notes attached to it. + +--stdin:: + Also read the object names to remove notes from from the standard + input (there is no reason you cannot combine this with object + names from the command line). + -n:: --dry-run:: Do not remove anything; just report the object names whose notes would be removed. +-s <strategy>:: +--strategy=<strategy>:: + When merging notes, resolve notes conflicts using the given + strategy. The following strategies are recognized: "manual" + (default), "ours", "theirs", "union" and "cat_sort_uniq". + See the "NOTES MERGE STRATEGIES" section below for more + information on each notes merge strategy. + +--commit:: + Finalize an in-progress 'git notes merge'. Use this option + when you have resolved the conflicts that 'git notes merge' + stored in .git/NOTES_MERGE_WORKTREE. This amends the partial + merge commit created by 'git notes merge' (stored in + .git/NOTES_MERGE_PARTIAL) by adding the notes in + .git/NOTES_MERGE_WORKTREE. The notes ref stored in the + .git/NOTES_MERGE_REF symref is updated to the resulting commit. + +--abort:: + Abort/reset a in-progress 'git notes merge', i.e. a notes merge + with conflicts. This simply removes all files related to the + notes merge. + +-q:: +--quiet:: + When merging notes, operate quietly. + -v:: --verbose:: - Report all object names whose notes are removed. + When merging notes, be more verbose. + When pruning notes, report all object names whose notes are + removed. DISCUSSION @@ -163,6 +228,38 @@ object, in which case the history of the notes can be read with `git log -p -g <refname>`. +NOTES MERGE STRATEGIES +---------------------- + +The default notes merge strategy is "manual", which checks out +conflicting notes in a special work tree for resolving notes conflicts +(`.git/NOTES_MERGE_WORKTREE`), and instructs the user to resolve the +conflicts in that work tree. +When done, the user can either finalize the merge with +'git notes merge --commit', or abort the merge with +'git notes merge --abort'. + +"ours" automatically resolves conflicting notes in favor of the local +version (i.e. the current notes ref). + +"theirs" automatically resolves notes conflicts in favor of the remote +version (i.e. the given notes ref being merged into the current notes +ref). + +"union" automatically resolves notes conflicts by concatenating the +local and remote versions. + +"cat_sort_uniq" is similar to "union", but in addition to concatenating +the local and remote versions, this strategy also sorts the resulting +lines, and removes duplicate lines from the result. This is equivalent +to applying the "cat | sort | uniq" shell pipeline to the local and +remote versions. This strategy is useful if the notes follow a line-based +format where one wants to avoid duplicated lines in the merge result. +Note that if either the local or remote version contain duplicate lines +prior to the merge, these will also be removed by this notes merge +strategy. + + EXAMPLES -------- @@ -189,6 +286,8 @@ $ blob=$(git hash-object -w a.out) $ git notes --ref=built add -C "$blob" HEAD ------------ +(You cannot simply use `git notes --ref=built add -F a.out HEAD` +because that is not binary-safe.) Of course, it doesn't make much sense to display non-text-format notes with 'git log', so if you use such notes, you'll probably need to write some special-purpose tools to do something useful with them. diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 8ed09c0b3c..20c8551d6a 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -11,8 +11,8 @@ SYNOPSIS [verse] 'git pack-objects' [-q | --progress | --all-progress] [--all-progress-implied] [--no-reuse-delta] [--delta-base-offset] [--non-empty] - [--local] [--incremental] [--window=N] [--depth=N] - [--revs [--unpacked | --all]*] [--stdout | base-name] + [--local] [--incremental] [--window=<n>] [--depth=<n>] + [--revs [--unpacked | --all]] [--stdout | base-name] [--keep-true-parents] < object-list @@ -82,8 +82,8 @@ base-name:: reference was included in the resulting packfile. This can be useful to send new tags to native git clients. ---window=[N]:: ---depth=[N]:: +--window=<n>:: +--depth=<n>:: These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and @@ -95,10 +95,10 @@ base-name:: times to get to the necessary object. The default value for --window is 10 and --depth is 50. ---window-memory=[N]:: +--window-memory=<n>:: This option provides an additional limit on top of `--window`; the window size will dynamically scale down so as to not take - up more than N bytes in memory. This is useful in + up more than '<n>' bytes in memory. This is useful in repositories with a mix of large and small objects to not run out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The @@ -106,7 +106,7 @@ base-name:: `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=[N]:: +--max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. @@ -115,7 +115,7 @@ base-name:: --honor-pack-keep:: This flag causes an object already in a local pack that - has a .keep file to be ignored, even if it it would have + has a .keep file to be ignored, even if it would have otherwise been packed. --incremental:: @@ -171,7 +171,7 @@ base-name:: wholesale enforcement of a different compression level on the packed data is desired. ---compression=[N]:: +--compression=<n>:: Specifies compression level for newly-compressed data in the generated pack. If not specified, pack compression level is determined first by pack.compression, then by core.compression, @@ -190,15 +190,20 @@ self-contained. Use `git index-pack --fix-thin` (see linkgit:git-index-pack[1]) to restore the self-contained property. --delta-base-offset:: - A packed archive can express base object of a delta as - either 20-byte object name or as an offset in the - stream, but older version of git does not understand the + A packed archive can express the base object of a delta as + either a 20-byte object name or as an offset in the + stream, but ancient versions of git don't understand the latter. By default, 'git pack-objects' only uses the former format for better compatibility. This option allows the command to use the latter format for compactness. Depending on the average delta chain length, this option typically shrinks the resulting packfile by 3-5 per-cent. ++ +Note: Porcelain commands such as `git gc` (see linkgit:git-gc[1]), +`git repack` (see linkgit:git-repack[1]) pass this option by default +in modern git when they put objects in your repository into pack files. +So does `git bundle` (see linkgit:git-bundle[1]) when it creates a bundle. --threads=<n>:: Specifies the number of threads to spawn when searching for best @@ -219,15 +224,6 @@ self-contained. Use `git index-pack --fix-thin` With this option, parents that are hidden by grafts are packed nevertheless. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - SEE ALSO -------- linkgit:git-rev-list[1] diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt index d0607879db..f2869da572 100644 --- a/Documentation/git-pack-redundant.txt +++ b/Documentation/git-pack-redundant.txt @@ -8,6 +8,7 @@ git-pack-redundant - Find redundant pack files SYNOPSIS -------- +[verse] 'git pack-redundant' [ --verbose ] [ --alt-odb ] < --all | .pack filename ... > DESCRIPTION @@ -38,14 +39,6 @@ OPTIONS --verbose:: Outputs some statistics to stderr. Has a small performance penalty. -Author ------- -Written by Lukas Sandström <lukass@etek.chalmers.se> - -Documentation --------------- -Documentation by Lukas Sandström <lukass@etek.chalmers.se> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt index 1ee99c208c..a3c6677bfa 100644 --- a/Documentation/git-pack-refs.txt +++ b/Documentation/git-pack-refs.txt @@ -7,6 +7,7 @@ git-pack-refs - Pack heads and tags for efficient repository access SYNOPSIS -------- +[verse] 'git pack-refs' [--all] [--no-prune] DESCRIPTION @@ -56,11 +57,6 @@ a repository with many branches of historical interests. The command usually removes loose refs under `$GIT_DIR/refs` hierarchy after packing them. This option tells it not to. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-parse-remote.txt b/Documentation/git-parse-remote.txt index 39d9daa7e0..a45ea1ece8 100644 --- a/Documentation/git-parse-remote.txt +++ b/Documentation/git-parse-remote.txt @@ -8,6 +8,7 @@ git-parse-remote - Routines to help parsing remote repository access parameters SYNOPSIS -------- +[verse] '. "$(git --exec-path)/git-parse-remote"' DESCRIPTION @@ -17,14 +18,6 @@ routines to parse files under $GIT_DIR/remotes/ and $GIT_DIR/branches/ and configuration variables that are related to fetching, pulling and pushing. -Author ------- -Written by Junio C Hamano. - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt index 4dae1390a5..90268f02e7 100644 --- a/Documentation/git-patch-id.txt +++ b/Documentation/git-patch-id.txt @@ -7,6 +7,7 @@ git-patch-id - Compute unique ID for a patch SYNOPSIS -------- +[verse] 'git patch-id' < <patch> DESCRIPTION @@ -29,14 +30,6 @@ OPTIONS <patch>:: The diff to create the ID of. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt index 87dacd797f..87ea3fb054 100644 --- a/Documentation/git-peek-remote.txt +++ b/Documentation/git-peek-remote.txt @@ -8,6 +8,7 @@ git-peek-remote - List the references in a remote repository SYNOPSIS -------- +[verse] 'git peek-remote' [--upload-pack=<git-upload-pack>] [<host>:]<directory> DESCRIPTION @@ -37,14 +38,6 @@ OPTIONS The repository to sync from. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt index abfc6b6ead..80dc022ede 100644 --- a/Documentation/git-prune-packed.txt +++ b/Documentation/git-prune-packed.txt @@ -8,6 +8,7 @@ git-prune-packed - Remove extra objects that are already in pack files SYNOPSIS -------- +[verse] 'git prune-packed' [-n|--dry-run] [-q|--quiet] @@ -36,14 +37,6 @@ OPTIONS --quiet:: Squelch the progress indicator. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Ryan Anderson <ryan@michonline.com> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index 4d673a5686..80d01b0571 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -8,6 +8,7 @@ git-prune - Prune all unreachable objects from the object database SYNOPSIS -------- +[verse] 'git prune' [-n] [-v] [--expire <expire>] [--] [<head>...] DESCRIPTION @@ -78,14 +79,6 @@ linkgit:git-fsck[1], linkgit:git-gc[1], linkgit:git-reflog[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index c50f7dcb89..e1da468766 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -8,6 +8,7 @@ git-pull - Fetch from and merge with another repository or a local branch SYNOPSIS -------- +[verse] 'git pull' [options] [<repository> [<refspec>...]] @@ -26,9 +27,9 @@ With `--rebase`, it runs 'git rebase' instead of 'git merge'. <repository> should be the name of a remote repository as passed to linkgit:git-fetch[1]. <refspec> can name an arbitrary remote ref (for example, the name of a tag) or even -a collection of refs with corresponding remote tracking branches -(e.g., refs/heads/*:refs/remotes/origin/*), but usually it is -the name of a branch in the remote repository. +a collection of refs with corresponding remote-tracking branches +(e.g., refs/heads/{asterisk}:refs/remotes/origin/{asterisk}), +but usually it is the name of a branch in the remote repository. Default values for <repository> and <branch> are read from the "remote" and "merge" configuration for the current branch @@ -84,6 +85,15 @@ must be given before the options meant for 'git fetch'. --verbose:: Pass --verbose to git-fetch and git-merge. +--[no-]recurse-submodules[=yes|on-demand|no]:: + This option controls if new commits of all populated submodules should + be fetched too (see linkgit:git-config[1] and linkgit:gitmodules[5]). + That might be necessary to get the data needed for merging submodule + commits, a feature git learned in 1.7.3. Notice that the result of a + merge will not be checked out in the submodule, "git submodule update" + has to be called afterwards to bring the work tree up to date with the + merge result. + Options related to merging ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -92,12 +102,15 @@ include::merge-options.txt[] :git-pull: 1 --rebase:: - Instead of a merge, perform a rebase after fetching. If - there is a remote ref for the upstream branch, and this branch - was rebased since last fetched, the rebase uses that information - to avoid rebasing non-local changes. To make this the default - for branch `<name>`, set configuration `branch.<name>.rebase` - to `true`. + Rebase the current branch on top of the upstream branch after + fetching. If there is a remote-tracking branch corresponding to + the upstream branch and the upstream branch was rebased since last + fetched, the rebase uses that information to avoid rebasing + non-local changes. ++ +See `branch.<name>.rebase` and `branch.autosetuprebase` in +linkgit:git-config[1] if you want to make `git pull` always use +`{litdd}rebase` instead of merging. + [NOTE] This is a potentially _dangerous_ mode of operation. @@ -134,7 +147,7 @@ and if there is not any such variable, the value on `URL: ` line in `$GIT_DIR/remotes/<origin>` file is used. In order to determine what remote branches to fetch (and -optionally store in the tracking branches) when the command is +optionally store in the remote-tracking branches) when the command is run without any refspec parameters on the command line, values of the configuration variable `remote.<origin>.fetch` are consulted, and if there aren't any, `$GIT_DIR/remotes/<origin>` @@ -147,9 +160,9 @@ refs/heads/*:refs/remotes/origin/* ------------ A globbing refspec must have a non-empty RHS (i.e. must store -what were fetched in tracking branches), and its LHS and RHS +what were fetched in remote-tracking branches), and its LHS and RHS must end with `/*`. The above specifies that all remote -branches are tracked using tracking branches in +branches are tracked using remote-tracking branches in `refs/remotes/origin/` hierarchy under the same name. The rule to determine which remote branch to merge after @@ -208,22 +221,19 @@ If you tried a pull which resulted in a complex conflicts and would want to start over, you can recover with 'git reset'. +BUGS +---- +Using --recurse-submodules can only fetch new commits in already checked +out submodules right now. When e.g. upstream added a new submodule in the +just fetched commits of the superproject the submodule itself can not be +fetched, making it impossible to check out that submodule later without +having to do a fetch again. This is expected to be fixed in a future git +version. + SEE ALSO -------- linkgit:git-fetch[1], linkgit:git-merge[1], linkgit:git-config[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Jon Loeliger, -David Greaves, -Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 020955ff5a..aede48877f 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -41,7 +41,7 @@ OPTIONS[[OPTIONS]] + The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or -`HEAD` (see linkgit:gitrevisions[1]). +`HEAD` (see linkgit:gitrevisions[7]). + The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must @@ -162,6 +162,12 @@ useful if you write an alias or script around 'git push'. is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. +--recurse-submodules=check:: + Check whether all submodule commits used by the revisions to be + pushed are available on a remote tracking branch. Otherwise the + push will be aborted and the command will exit with non-zero status. + + include::urls-remotes.txt[] OUTPUT @@ -327,12 +333,12 @@ a case where you do mean to lose history. Examples -------- -git push:: +`git push`:: Works like `git push <remote>`, where <remote> is the current branch's remote (or `origin`, if no remote is configured for the current branch). -git push origin:: +`git push origin`:: Without additional configuration, works like `git push origin :`. + @@ -344,45 +350,45 @@ use `git config remote.origin.push HEAD`. Any valid <refspec> (like the ones in the examples below) can be configured as the default for `git push origin`. -git push origin ::: +`git push origin :`:: Push "matching" branches to `origin`. See <refspec> in the <<OPTIONS,OPTIONS>> section above for a description of "matching" branches. -git push origin master:: +`git push origin master`:: Find a ref that matches `master` in the source repository (most likely, it would find `refs/heads/master`), and update the same ref (e.g. `refs/heads/master`) in `origin` repository with it. If `master` did not exist remotely, it would be created. -git push origin HEAD:: +`git push origin HEAD`:: A handy way to push the current branch to the same name on the remote. -git push origin master:satellite/master dev:satellite/dev:: +`git push origin master:satellite/master dev:satellite/dev`:: Use the source ref that matches `master` (e.g. `refs/heads/master`) to update the ref that matches `satellite/master` (most probably `refs/remotes/satellite/master`) in the `origin` repository, then do the same for `dev` and `satellite/dev`. -git push origin HEAD:master:: +`git push origin HEAD:master`:: Push the current branch to the remote ref matching `master` in the `origin` repository. This form is convenient to push the current branch without thinking about its local name. -git push origin master:refs/heads/experimental:: +`git push origin master:refs/heads/experimental`:: Create the branch `experimental` in the `origin` repository by copying the current `master` branch. This form is only needed to create a new branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work. -git push origin :experimental:: +`git push origin :experimental`:: Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. -git push origin {plus}dev:master:: +`git push origin {plus}dev:master`:: Update the origin repository's master branch with the dev branch, allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the @@ -406,16 +412,6 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index 579e8d2f3b..7f112f3dcd 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -49,14 +49,6 @@ The default for the patch directory is patches or the value of the $QUILT_PATCHES environment variable. -Author ------- -Written by Eric Biederman <ebiederm@lnxi.com> - -Documentation --------------- -Documentation by Eric Biederman <ebiederm@lnxi.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 2e78da448f..5375549820 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -8,10 +8,11 @@ git-read-tree - Reads tree information into the index SYNOPSIS -------- +[verse] 'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u [--exclude-per-directory=<gitignore>] | -i]] [--index-output=<file>] [--no-sparse-checkout] - <tree-ish1> [<tree-ish2> [<tree-ish3>]] + (--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]]) DESCRIPTION @@ -46,13 +47,18 @@ OPTIONS -i:: Usually a merge requires the index file as well as the - files in the working tree are up to date with the + files in the working tree to be up to date with the current head commit, in order not to lose local changes. This flag disables the check with the working tree and is meant to be used when creating a merge of trees that are not directly related to the current working tree status into a temporary index file. +-n:: +--dry-run:: + Check if the command would error out, without updating the index + nor the files in the working tree for real. + -v:: Show the progress of checking files out. @@ -65,21 +71,21 @@ OPTIONS --aggressive:: Usually a three-way merge by 'git read-tree' resolves the merge for really trivial cases and leaves other - cases unresolved in the index, so that Porcelains can + cases unresolved in the index, so that porcelains can implement different merge policies. This flag makes the - command to resolve a few more cases internally: + command resolve a few more cases internally: + * when one side removes a path and the other side leaves the path unmodified. The resolution is to remove that path. * when both sides remove a path. The resolution is to remove that path. -* when both sides adds a path identically. The resolution +* when both sides add a path identically. The resolution is to add that path. --prefix=<prefix>/:: Keep the current index contents, and read the contents - of named tree-ish under directory at `<prefix>`. The + of the named tree-ish under the directory at `<prefix>`. The original index file cannot have anything at the path - `<prefix>` itself, and have nothing in `<prefix>/` + `<prefix>` itself, nor anything in the `<prefix>/` directory. Note that the `<prefix>/` value must end with a slash. @@ -114,6 +120,10 @@ OPTIONS Disable sparse checkout support even if `core.sparseCheckout` is true. +--empty:: + Instead of reading tree object(s) into the index, just empty + it. + <tree-ish#>:: The id of the tree object(s) to be read/merged. @@ -369,70 +379,54 @@ have finished your work-in-progress), attempt the merge again. Sparse checkout --------------- -"Sparse checkout" allows to sparsely populate working directory. -It uses skip-worktree bit (see linkgit:git-update-index[1]) to tell -Git whether a file on working directory is worth looking at. +"Sparse checkout" allows populating the working directory sparsely. +It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell +Git whether a file in the working directory is worth looking at. -"git read-tree" and other merge-based commands ("git merge", "git -checkout"...) can help maintaining skip-worktree bitmap and working +'git read-tree' and other merge-based commands ('git merge', 'git +checkout'...) can help maintaining the skip-worktree bitmap and working directory update. `$GIT_DIR/info/sparse-checkout` is used to -define the skip-worktree reference bitmap. When "git read-tree" needs -to update working directory, it will reset skip-worktree bit in index +define the skip-worktree reference bitmap. When 'git read-tree' needs +to update the working directory, it resets the skip-worktree bit in the index based on this file, which uses the same syntax as .gitignore files. -If an entry matches a pattern in this file, skip-worktree will be -set on that entry. Otherwise, skip-worktree will be unset. +If an entry matches a pattern in this file, skip-worktree will not be +set on that entry. Otherwise, skip-worktree will be set. Then it compares the new skip-worktree value with the previous one. If -skip-worktree turns from unset to set, it will add the corresponding -file back. If it turns from set to unset, that file will be removed. +skip-worktree turns from set to unset, it will add the corresponding +file back. If it turns from unset to set, that file will be removed. While `$GIT_DIR/info/sparse-checkout` is usually used to specify what -files are in. You can also specify what files are _not_ in, using -negate patterns. For example, to remove file "unwanted": +files are in, you can also specify what files are _not_ in, using +negate patterns. For example, to remove the file `unwanted`: ---------------- -* +/* !unwanted ---------------- -Another tricky thing is fully repopulating working directory when you +Another tricky thing is fully repopulating the working directory when you no longer want sparse checkout. You cannot just disable "sparse -checkout" because skip-worktree are still in the index and you working -directory is still sparsely populated. You should re-populate working +checkout" because skip-worktree bits are still in the index and your working +directory is still sparsely populated. You should re-populate the working directory with the `$GIT_DIR/info/sparse-checkout` file content as follows: ---------------- -* +/* ---------------- -Then you can disable sparse checkout. Sparse checkout support in "git -read-tree" and similar commands is disabled by default. You need to +Then you can disable sparse checkout. Sparse checkout support in 'git +read-tree' and similar commands is disabled by default. You need to turn `core.sparseCheckout` on in order to have sparse checkout support. -BUGS ----- -In order to match a directory with $GIT_DIR/info/sparse-checkout, -trailing slash must be used. The form without trailing slash, while -works with .gitignore, does not work with sparse checkout. - - SEE ALSO -------- linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; linkgit:gitignore[5] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 30e5c0eb14..504945c691 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -9,10 +9,9 @@ SYNOPSIS -------- [verse] 'git rebase' [-i | --interactive] [options] [--onto <newbase>] - <upstream> [<branch>] + [<upstream>] [<branch>] 'git rebase' [-i | --interactive] [options] --onto <newbase> --root [<branch>] - 'git rebase' --continue | --skip | --abort DESCRIPTION @@ -21,6 +20,12 @@ If <branch> is specified, 'git rebase' will perform an automatic `git checkout <branch>` before doing anything else. Otherwise it remains on the current branch. +If <upstream> is not specified, the upstream configured in +branch.<name>.remote and branch.<name>.merge options will be used; see +linkgit:git-config[1] for details. If you are currently not on any +branch or if the current branch does not have a configured upstream, +the rebase will abort. + All changes made by commits in the current branch but that are not in <upstream> are saved to a temporary area. This is the same set of commits that would be shown by `git log <upstream>..HEAD` (or @@ -40,7 +45,7 @@ with a different commit message or timestamp will be skipped). It is possible that a merge failure will prevent this process from being completely automatic. You will have to resolve any such merge failure and run `git rebase --continue`. Another option is to bypass the commit -that caused the merge failure with `git rebase --skip`. To restore the +that caused the merge failure with `git rebase --skip`. To check out the original <branch> and remove the .git/rebase-apply working files, use the command `git rebase --abort` instead. @@ -66,8 +71,9 @@ would be: D---E---F---G master ------------ -The latter form is just a short-hand of `git checkout topic` -followed by `git rebase master`. +*NOTE:* The latter form is just a short-hand of `git checkout topic` +followed by `git rebase master`. When rebase exits `topic` will +remain the checked-out branch. If the upstream branch already contains a change you have made (e.g., because you mailed a patch which was applied upstream), then that commit @@ -216,7 +222,8 @@ leave out at most one of A and B, in which case it defaults to HEAD. <upstream>:: Upstream branch to compare against. May be any valid commit, - not just an existing branch name. + not just an existing branch name. Defaults to the configured + upstream for the current branch. <branch>:: Working branch; defaults to HEAD. @@ -225,7 +232,11 @@ leave out at most one of A and B, in which case it defaults to HEAD. Restart the rebasing process after having resolved a merge conflict. --abort:: - Restore the original branch and abort the rebase operation. + Abort the rebase operation and reset HEAD to the original + branch. If <branch> was provided when the rebase operation was + started, then HEAD will be reset to <branch>. Otherwise HEAD + will be reset to where it was when the rebase operation was + started. --skip:: Restart the rebasing process by skipping the current patch. @@ -279,6 +290,10 @@ which makes little sense. --no-verify:: This option bypasses the pre-rebase hook. See also linkgit:githooks[5]. +--verify:: + Allows the pre-rebase hook to run, which is the default. This option can + be used to override --no-verify. See also linkgit:githooks[5]. + -C<n>:: Ensure at least <n> lines of surrounding context match before and after each change. When fewer lines of surrounding @@ -654,7 +669,6 @@ The ripple effect of a "hard case" recovery is especially bad: 'everyone' downstream from 'topic' will now have to perform a "hard case" recovery too! - BUGS ---- The todo list presented by `--preserve-merges --interactive` does not @@ -677,15 +691,6 @@ by moving the "pick 4" line will result in the following history: 1 --- 2 --- 4 --- 5 ------------ -Authors ------- -Written by Junio C Hamano <gitster@pobox.com> and -Johannes E. Schindelin <johannes.schindelin@gmx.de> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index 2790eebaff..b1f7dc643a 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -8,6 +8,7 @@ git-receive-pack - Receive what is pushed into the repository SYNOPSIS -------- +[verse] 'git-receive-pack' <directory> DESCRIPTION @@ -149,16 +150,7 @@ if the repository is packed and is served via a dumb transport. SEE ALSO -------- -linkgit:git-send-pack[1] - - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. +linkgit:git-send-pack[1], linkgit:gitnamespaces[7] GIT --- diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 5a0451aaf3..976dc14937 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -8,6 +8,7 @@ git-reflog - Manage reflog information SYNOPSIS -------- +[verse] 'git reflog' <subcommand> <options> DESCRIPTION @@ -40,7 +41,7 @@ see linkgit:git-log[1]. The reflog is useful in various git commands, to specify the old value of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be two moves ago", `master@\{one.week.ago\}` means "where master used to -point to one week ago", and so on. See linkgit:gitrevisions[1] for +point to one week ago", and so on. See linkgit:gitrevisions[7] for more details. To delete single entries from the reflog, use the subcommand "delete" @@ -90,14 +91,6 @@ them. --verbose:: Print extra information on screen. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt index 8a5842bb93..3b33c99510 100644 --- a/Documentation/git-relink.txt +++ b/Documentation/git-relink.txt @@ -7,7 +7,8 @@ git-relink - Hardlink common objects in local repositories SYNOPSIS -------- -'git relink' [--safe] <dir> [<dir>]* <master_dir> +[verse] +'git relink' [--safe] <dir>... <master_dir> DESCRIPTION ----------- @@ -24,14 +25,6 @@ OPTIONS <dir>:: Directories containing a .git/objects/ subdirectory. -Author ------- -Written by Ryan Anderson <ryan@michonline.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote-ext.txt b/Documentation/git-remote-ext.txt new file mode 100644 index 0000000000..8a8e1d775d --- /dev/null +++ b/Documentation/git-remote-ext.txt @@ -0,0 +1,126 @@ +git-remote-ext(1) +================= + +NAME +---- +git-remote-ext - Bridge smart transport to external command. + +SYNOPSIS +-------- +[verse] +git remote add <nick> "ext::<command>[ <arguments>...]" + +DESCRIPTION +----------- +This remote helper uses the specified '<command>' to connect +to a remote git server. + +Data written to stdin of the specified '<command>' is assumed +to be sent to a git:// server, git-upload-pack, git-receive-pack +or git-upload-archive (depending on situation), and data read +from stdout of <command> is assumed to be received from +the same service. + +Command and arguments are separated by an unescaped space. + +The following sequences have a special meaning: + +'% ':: + Literal space in command or argument. + +'%%':: + Literal percent sign. + +'%s':: + Replaced with name (receive-pack, upload-pack, or + upload-archive) of the service git wants to invoke. + +'%S':: + Replaced with long name (git-receive-pack, + git-upload-pack, or git-upload-archive) of the service + git wants to invoke. + +'%G' (must be the first characters in an argument):: + This argument will not be passed to '<command>'. Instead, it + will cause the helper to start by sending git:// service requests to + the remote side with the service field set to an appropriate value and + the repository field set to rest of the argument. Default is not to send + such a request. ++ +This is useful if remote side is git:// server accessed over +some tunnel. + +'%V' (must be first characters in argument):: + This argument will not be passed to '<command>'. Instead it sets + the vhost field in the git:// service request (to rest of the argument). + Default is not to send vhost in such request (if sent). + +ENVIRONMENT VARIABLES: +---------------------- + +GIT_TRANSLOOP_DEBUG:: + If set, prints debugging information about various reads/writes. + +ENVIRONMENT VARIABLES PASSED TO COMMAND: +---------------------------------------- + +GIT_EXT_SERVICE:: + Set to long name (git-upload-pack, etc...) of service helper needs + to invoke. + +GIT_EXT_SERVICE_NOPREFIX:: + Set to long name (upload-pack, etc...) of service helper needs + to invoke. + + +EXAMPLES: +--------- +This remote helper is transparently used by git when +you use commands such as "git fetch <URL>", "git clone <URL>", +, "git push <URL>" or "git remote add <nick> <URL>", where <URL> +begins with `ext::`. Examples: + +"ext::ssh -i /home/foo/.ssh/somekey user@host.example %S 'foo/repo'":: + Like host.example:foo/repo, but use /home/foo/.ssh/somekey as + keypair and user as user on remote side. This avoids needing to + edit .ssh/config. + +"ext::socat -t3600 - ABSTRACT-CONNECT:/git-server %G/somerepo":: + Represents repository with path /somerepo accessable over + git protocol at abstract namespace address /git-server. + +"ext::git-server-alias foo %G/repo":: + Represents a repository with path /repo accessed using the + helper program "git-server-alias foo". The path to the + repository and type of request are not passed on the command + line but as part of the protocol stream, as usual with git:// + protocol. + +"ext::git-server-alias foo %G/repo %Vfoo":: + Represents a repository with path /repo accessed using the + helper program "git-server-alias foo". The hostname for the + remote server passed in the protocol stream will be "foo" + (this allows multiple virtual git servers to share a + link-level address). + +"ext::git-server-alias foo %G/repo% with% spaces %Vfoo":: + Represents a repository with path '/repo with spaces' accessed + using the helper program "git-server-alias foo". The hostname for + the remote server passed in the protocol stream will be "foo" + (this allows multiple virtual git servers to share a + link-level address). + +"ext::git-ssl foo.example /bar":: + Represents a repository accessed using the helper program + "git-ssl foo.example /bar". The type of request can be + determined by the helper using environment variables (see + above). + +Documentation +-------------- +Documentation by Ilari Liusvaara, Jonathan Nieder and the git list +<git@vger.kernel.org> + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote-fd.txt b/Documentation/git-remote-fd.txt new file mode 100644 index 0000000000..f095d57d09 --- /dev/null +++ b/Documentation/git-remote-fd.txt @@ -0,0 +1,59 @@ +git-remote-fd(1) +================ + +NAME +---- +git-remote-fd - Reflect smart transport stream back to caller + +SYNOPSIS +-------- +"fd::<infd>[,<outfd>][/<anything>]" (as URL) + +DESCRIPTION +----------- +This helper uses specified file descriptors to connect to a remote git server. +This is not meant for end users but for programs and scripts calling git +fetch, push or archive. + +If only <infd> is given, it is assumed to be a bidirectional socket connected +to remote git server (git-upload-pack, git-receive-pack or +git-upload-achive). If both <infd> and <outfd> are given, they are assumed +to be pipes connected to a remote git server (<infd> being the inbound pipe +and <outfd> being the outbound pipe. + +It is assumed that any handshaking procedures have already been completed +(such as sending service request for git://) before this helper is started. + +<anything> can be any string. It is ignored. It is meant for providing +information to user in the URL in case that URL is displayed in some +context. + +ENVIRONMENT VARIABLES +--------------------- +GIT_TRANSLOOP_DEBUG:: + If set, prints debugging information about various reads/writes. + +EXAMPLES +-------- +`git fetch fd::17 master`:: + Fetch master, using file descriptor #17 to communicate with + git-upload-pack. + +`git fetch fd::17/foo master`:: + Same as above. + +`git push fd::7,8 master (as URL)`:: + Push master, using file descriptor #7 to read data from + git-receive-pack and file descriptor #8 to write data to + same service. + +`git push fd::7,8/bar master`:: + Same as above. + +Documentation +-------------- +Documentation by Ilari Liusvaara and the git list <git@vger.kernel.org> + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 3a23477ce7..674797cd83 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -7,6 +7,7 @@ git-remote-helpers - Helper programs to interact with remote repositories SYNOPSIS -------- +[verse] 'git remote-<transport>' <repository> [<URL>] DESCRIPTION @@ -23,22 +24,141 @@ output. Because a remote helper runs as an independent process from git, there is no need to re-link git to add a new helper, nor any need to link the helper with the implementation of git. -Every helper must support the "capabilities" command, which git will -use to determine what other commands the helper will accept. Other -commands generally concern facilities like discovering and updating -remote refs, transporting objects between the object database and -the remote repository, and updating the local object store. - -Helpers supporting the 'fetch' capability can discover refs from the -remote repository and transfer objects reachable from those refs to -the local object store. Helpers supporting the 'push' capability can -transfer local objects to the remote repository and update remote refs. +Every helper must support the "capabilities" command, which git +uses to determine what other commands the helper will accept. Those +other commands can be used to discover and update remote refs, +transport objects between the object database and the remote repository, +and update the local object store. Git comes with a "curl" family of remote helpers, that handle various transport protocols, such as 'git-remote-http', 'git-remote-https', 'git-remote-ftp' and 'git-remote-ftps'. They implement the capabilities 'fetch', 'option', and 'push'. +INPUT FORMAT +------------ + +Git sends the remote helper a list of commands on standard input, one +per line. The first command is always the 'capabilities' command, in +response to which the remote helper must print a list of the +capabilities it supports (see below) followed by a blank line. The +response to the capabilities command determines what commands Git uses +in the remainder of the command stream. + +The command stream is terminated by a blank line. In some cases +(indicated in the documentation of the relevant commands), this blank +line is followed by a payload in some other protocol (e.g., the pack +protocol), while in others it indicates the end of input. + +Capabilities +~~~~~~~~~~~~ + +Each remote helper is expected to support only a subset of commands. +The operations a helper supports are declared to git in the response +to the `capabilities` command (see COMMANDS, below). + +'option':: + For specifying settings like `verbosity` (how much output to + write to stderr) and `depth` (how much history is wanted in the + case of a shallow clone) that affect how other commands are + carried out. + +'connect':: + For fetching and pushing using git's native packfile protocol + that requires a bidirectional, full-duplex connection. + +'push':: + For listing remote refs and pushing specified objects from the + local object store to remote refs. + +'fetch':: + For listing remote refs and fetching the associated history to + the local object store. + +'import':: + For listing remote refs and fetching the associated history as + a fast-import stream. + +'refspec' <refspec>:: + This modifies the 'import' capability, allowing the produced + fast-import stream to modify refs in a private namespace + instead of writing to refs/heads or refs/remotes directly. + It is recommended that all importers providing the 'import' + capability use this. ++ +A helper advertising the capability +`refspec refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}` +is saying that, when it is asked to `import refs/heads/topic`, the +stream it outputs will update the `refs/svn/origin/branches/topic` +ref. ++ +This capability can be advertised multiple times. The first +applicable refspec takes precedence. The left-hand of refspecs +advertised with this capability must cover all refs reported by +the list command. If no 'refspec' capability is advertised, +there is an implied `refspec {asterisk}:{asterisk}`. + +Capabilities for Pushing +~~~~~~~~~~~~~~~~~~~~~~~~ +'connect':: + Can attempt to connect to 'git receive-pack' (for pushing), + 'git upload-pack', etc for communication using the + packfile protocol. ++ +Supported commands: 'connect'. + +'push':: + Can discover remote refs and push local commits and the + history leading up to them to new or existing remote refs. ++ +Supported commands: 'list for-push', 'push'. + +If a helper advertises both 'connect' and 'push', git will use +'connect' if possible and fall back to 'push' if the helper requests +so when connecting (see the 'connect' command under COMMANDS). + +Capabilities for Fetching +~~~~~~~~~~~~~~~~~~~~~~~~~ +'connect':: + Can try to connect to 'git upload-pack' (for fetching), + 'git receive-pack', etc for communication using the + packfile protocol. ++ +Supported commands: 'connect'. + +'fetch':: + Can discover remote refs and transfer objects reachable from + them to the local object store. ++ +Supported commands: 'list', 'fetch'. + +'import':: + Can discover remote refs and output objects reachable from + them as a stream in fast-import format. ++ +Supported commands: 'list', 'import'. + +If a helper advertises 'connect', git will use it if possible and +fall back to another capability if the helper requests so when +connecting (see the 'connect' command under COMMANDS). +When choosing between 'fetch' and 'import', git prefers 'fetch'. +Other frontends may have some other order of preference. + +'refspec' <refspec>:: + This modifies the 'import' capability. ++ +A helper advertising +`refspec refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}` +in its capabilities is saying that, when it handles +`import refs/heads/topic`, the stream it outputs will update the +`refs/svn/origin/branches/topic` ref. ++ +This capability can be advertised multiple times. The first +applicable refspec takes precedence. The left-hand of refspecs +advertised with this capability must cover all refs reported by +the list command. If no 'refspec' capability is advertised, +there is an implied `refspec {asterisk}:{asterisk}`. + INVOCATION ---------- @@ -47,6 +167,9 @@ arguments. The first argument specifies a remote repository as in git; it is either the name of a configured remote or a URL. The second argument specifies a URL; it is usually of the form '<transport>://<address>', but any arbitrary string is possible. +The 'GIT_DIR' environment variable is set up for the remote helper +and can be used to determine where to store additional data or from +which directory to invoke auxiliary git commands. When git encounters a URL of the form '<transport>://<address>', where '<transport>' is a protocol that it cannot handle natively, it @@ -118,7 +241,22 @@ Supported if the helper has the "fetch" capability. 'push' +<src>:<dst>:: Pushes the given local <src> commit or branch to the remote branch described by <dst>. A batch sequence of - one or more push commands is terminated with a blank line. + one or more 'push' commands is terminated with a blank line + (if there is only one reference to push, a single 'push' command + is followed by a blank line). For example, the following would + be two batches of 'push', the first asking the remote-helper + to push the local ref 'master' to the remote ref 'master' and + the local 'HEAD' to the remote 'branch', and the second + asking to push ref 'foo' to ref 'bar' (forced update requested + by the '+'). ++ +------------ +push refs/heads/master:refs/heads/master +push HEAD:refs/heads/branch +\n +push +refs/heads/foo:refs/heads/bar +\n +------------ + Zero or more protocol options may be entered after the last 'push' command, before the batch's terminating blank line. @@ -143,6 +281,11 @@ Supported if the helper has the "push" capability. Especially useful for interoperability with a foreign versioning system. + +Just like 'push', a batch sequence of one or more 'import' is +terminated with a blank line. For each batch of 'import', the remote +helper should produce a fast-import stream terminated by a 'done' +command. ++ Supported if the helper has the "import" capability. 'connect' <service>:: @@ -167,26 +310,6 @@ completing a valid response for the current command. Additional commands may be supported, as may be determined from capabilities reported by the helper. -CAPABILITIES ------------- - -'fetch':: -'option':: -'push':: -'import':: -'connect':: - This helper supports the corresponding command with the same name. - -'refspec' 'spec':: - When using the import command, expect the source ref to have - been written to the destination ref. The earliest applicable - refspec takes precedence. For example - "refs/heads/*:refs/svn/origin/branches/*" means that, after an - "import refs/heads/name", the script has written to - refs/svn/origin/branches/name. If this capability is used at - all, it must cover all refs reported by the list command; if - it is not used, it is effectively "*:*" - REF LIST ATTRIBUTES ------------------- @@ -201,12 +324,12 @@ REF LIST ATTRIBUTES OPTIONS ------- -'option verbosity' <N>:: +'option verbosity' <n>:: Changes the verbosity of messages displayed by the helper. - A value of 0 for N means that processes operate + A value of 0 for <n> means that processes operate quietly, and the helper produces only error output. 1 is the default level of verbosity, and higher values - of N correspond to the number of -v flags passed on the + of <n> correspond to the number of -v flags passed on the command line. 'option progress' \{'true'|'false'\}:: @@ -239,9 +362,7 @@ SEE ALSO -------- linkgit:git-remote[1] -Documentation -------------- -Documentation by Daniel Barkalow and Ilari Liusvaara +linkgit:git-remote-testgit[1] GIT --- diff --git a/Documentation/git-remote-testgit.txt b/Documentation/git-remote-testgit.txt new file mode 100644 index 0000000000..2a67d456a3 --- /dev/null +++ b/Documentation/git-remote-testgit.txt @@ -0,0 +1,30 @@ +git-remote-testgit(1) +===================== + +NAME +---- +git-remote-testgit - Example remote-helper + + +SYNOPSIS +-------- +[verse] +git clone testgit::<source-repo> [<destination>] + +DESCRIPTION +----------- + +This command is a simple remote-helper, that is used both as a +testcase for the remote-helper functionality, and as an example to +show remote-helper authors one possible implementation. + +The best way to learn more is to read the comments and source code in +'git-remote-testgit.py'. + +SEE ALSO +-------- +linkgit:git-remote-helpers[1] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index aa021b0cb8..5a8c5061f3 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git remote' [-v | --verbose] -'git remote add' [-t <branch>] [-m <master>] [-f] [--tags|--no-tags] [--mirror] <name> <url> +'git remote add' [-t <branch>] [-m <master>] [-f] [--tags|--no-tags] [--mirror=<fetch|push>] <name> <url> 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) @@ -20,7 +20,7 @@ SYNOPSIS 'git remote set-url --delete' [--push] <name> <url> 'git remote' [-v | --verbose] 'show' [-n] <name> 'git remote prune' [-n | --dry-run] <name> -'git remote' [-v | --verbose] 'update' [-p | --prune] [group | remote]... +'git remote' [-v | --verbose] 'update' [-p | --prune] [(<group> | <remote>)...] DESCRIPTION ----------- @@ -60,22 +60,25 @@ the remote repository. + With `-t <branch>` option, instead of the default glob refspec for the remote to track all branches under -`$GIT_DIR/remotes/<name>/`, a refspec to track only `<branch>` +the `refs/remotes/<name>/` namespace, a refspec to track only `<branch>` is created. You can give more than one `-t <branch>` to track multiple branches without grabbing all branches. + -With `-m <master>` option, `$GIT_DIR/remotes/<name>/HEAD` is set +With `-m <master>` option, a symbolic-ref `refs/remotes/<name>/HEAD` is set up to point at remote's `<master>` branch. See also the set-head command. + -In mirror mode, enabled with `\--mirror`, the refs will not be stored -in the 'refs/remotes/' namespace, but in 'refs/heads/'. This option -only makes sense in bare repositories. If a remote uses mirror -mode, furthermore, `git push` will always behave as if `\--mirror` -was passed. +When a fetch mirror is created with `\--mirror=fetch`, the refs will not +be stored in the 'refs/remotes/' namespace, but rather everything in +'refs/' on the remote will be directly mirrored into 'refs/' in the +local repository. This option only makes sense in bare repositories, +because a fetch would overwrite any local commits. ++ +When a push mirror is created with `\--mirror=push`, then `git push` +will always behave as if `\--mirror` was passed. 'rename':: -Rename the remote named <old> to <new>. All remote tracking branches and +Rename the remote named <old> to <new>. All remote-tracking branches and configuration settings for the remote are updated. + In case <old> and <new> are the same, and <old> is a file under @@ -84,29 +87,30 @@ the configuration file format. 'rm':: -Remove the remote named <name>. All remote tracking branches and +Remove the remote named <name>. All remote-tracking branches and configuration settings for the remote are removed. 'set-head':: -Sets or deletes the default branch (`$GIT_DIR/remotes/<name>/HEAD`) for +Sets or deletes the default branch (i.e. the target of the +symbolic-ref `refs/remotes/<name>/HEAD`) for the named remote. Having a default branch for a remote is not required, but allows the name of the remote to be specified in lieu of a specific branch. For example, if the default branch for `origin` is set to `master`, then `origin` may be specified wherever you would normally specify `origin/master`. + -With `-d`, `$GIT_DIR/remotes/<name>/HEAD` is deleted. +With `-d`, the symbolic ref `refs/remotes/<name>/HEAD` is deleted. + -With `-a`, the remote is queried to determine its `HEAD`, then -`$GIT_DIR/remotes/<name>/HEAD` is set to the same branch. e.g., if the remote +With `-a`, the remote is queried to determine its `HEAD`, then the +symbolic-ref `refs/remotes/<name>/HEAD` is set to the same branch. e.g., if the remote `HEAD` is pointed at `next`, "`git remote set-head origin -a`" will set -`$GIT_DIR/refs/remotes/origin/HEAD` to `refs/remotes/origin/next`. This will +the symbolic-ref `refs/remotes/origin/HEAD` to `refs/remotes/origin/next`. This will only work if `refs/remotes/origin/next` already exists; if not it must be fetched first. + -Use `<branch>` to set `$GIT_DIR/remotes/<name>/HEAD` explicitly. e.g., "git -remote set-head origin master" will set `$GIT_DIR/refs/remotes/origin/HEAD` to +Use `<branch>` to set the symbolic-ref `refs/remotes/<name>/HEAD` explicitly. e.g., "git +remote set-head origin master" will set the symbolic-ref `refs/remotes/origin/HEAD` to `refs/remotes/origin/master`. This will only work if `refs/remotes/origin/master` already exists; if not it must be fetched first. + @@ -146,7 +150,7 @@ With `-n` option, the remote heads are not queried first with 'prune':: -Deletes all stale tracking branches under <name>. +Deletes all stale remote-tracking branches under <name>. These stale branches have already been removed from the remote repository referenced by <name>, but are still locally available in "remotes/<name>". @@ -214,16 +218,6 @@ linkgit:git-fetch[1] linkgit:git-branch[1] linkgit:git-config[1] -Author ------- -Written by Junio Hamano - - -Documentation --------------- -Documentation by J. Bruce Fields and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 8c67d1724f..40af321153 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -8,7 +8,8 @@ git-repack - Pack unpacked objects in a repository SYNOPSIS -------- -'git repack' [-a] [-A] [-d] [-f] [-l] [-n] [-q] [--window=N] [--depth=N] +[verse] +'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [--window=<n>] [--depth=<n>] DESCRIPTION ----------- @@ -62,6 +63,10 @@ other objects in that pack they already have locally. linkgit:git-pack-objects[1]. -f:: + Pass the `--no-reuse-delta` option to `git-pack-objects`, see + linkgit:git-pack-objects[1]. + +-F:: Pass the `--no-reuse-object` option to `git-pack-objects`, see linkgit:git-pack-objects[1]. @@ -76,8 +81,8 @@ other objects in that pack they already have locally. this repository (or a direct copy of it) over HTTP or FTP. See linkgit:git-update-server-info[1]. ---window=[N]:: ---depth=[N]:: +--window=<n>:: +--depth=<n>:: These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and optionally names and compared against the @@ -87,10 +92,10 @@ other objects in that pack they already have locally. to be applied that many times to get to the necessary object. The default value for --window is 10 and --depth is 50. ---window-memory=[N]:: +--window-memory=<n>:: This option provides an additional limit on top of `--window`; the window size will dynamically scale down so as to not take - up more than N bytes in memory. This is useful in + up more than '<n>' bytes in memory. This is useful in repositories with a mix of large and small objects to not run out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The @@ -98,7 +103,7 @@ other objects in that pack they already have locally. `--window-memory=0` makes memory usage unlimited, which is the default. ---max-pack-size=[N]:: +--max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. If specified, multiple packfiles may be created. @@ -119,15 +124,6 @@ need to set the configuration variable `repack.UseDeltaBaseOffset` to is unaffected by this option as the conversion is performed on the fly as needed in that case. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Ryan Anderson <ryan@michonline.com> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index fde2092582..17df525275 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -80,17 +80,6 @@ linkgit:git-tag[1] linkgit:git-branch[1] linkgit:git[1] -Author ------- -Written by Christian Couder <chriscool@tuxfamily.org> and Junio C -Hamano <gitster@pobox.com>, based on 'git tag' by Kristian Hogsberg -<krh@redhat.com> and Carlos Rica <jasampler@gmail.com>. - -Documentation --------------- -Documentation by Christian Couder <chriscool@tuxfamily.org> and the -git-list <git@vger.kernel.org>, based on 'git tag' documentation. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt index e5bdb5533e..9ec115b9e0 100644 --- a/Documentation/git-repo-config.txt +++ b/Documentation/git-repo-config.txt @@ -8,6 +8,7 @@ git-repo-config - Get and set repository or global options SYNOPSIS -------- +[verse] 'git repo-config' ... @@ -16,3 +17,7 @@ DESCRIPTION This is a synonym for linkgit:git-config[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-request-pull.txt b/Documentation/git-request-pull.txt index 400f61f6e2..b99681ce85 100644 --- a/Documentation/git-request-pull.txt +++ b/Documentation/git-request-pull.txt @@ -7,6 +7,7 @@ git-request-pull - Generates a summary of pending changes SYNOPSIS -------- +[verse] 'git request-pull' [-p] <start> <url> [<end>] DESCRIPTION @@ -29,14 +30,6 @@ OPTIONS <end>:: Commit to end at; defaults to HEAD. -Author ------- -Written by Ryan Anderson <ryan@michonline.com> and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index db99d4786e..a6253ba617 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -7,7 +7,8 @@ git-rerere - Reuse recorded resolution of conflicted merges SYNOPSIS -------- -'git rerere' ['clear'|'forget' [<pathspec>]|'diff'|'status'|'gc'] +[verse] +'git rerere' ['clear'|'forget' <pathspec>|'diff'|'status'|'gc'] DESCRIPTION ----------- @@ -43,7 +44,7 @@ will automatically invoke this command. 'forget' <pathspec>:: This resets the conflict resolutions which rerere has recorded for the current -conflict in <pathspec>. The <pathspec> is optional. +conflict in <pathspec>. 'diff':: @@ -205,11 +206,6 @@ would conflict the same way as the test merge you resolved earlier. 'git rerere' will be run by 'git rebase' to help you resolve this conflict. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 9cf31485fe..b674866e6d 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -9,43 +9,52 @@ SYNOPSIS -------- [verse] 'git reset' [-q] [<commit>] [--] <paths>... -'git reset' --patch [<commit>] [--] [<paths>...] -'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>] +'git reset' (--patch | -p) [<commit>] [--] [<paths>...] +'git reset' (--soft | --mixed | --hard | --merge | --keep) [-q] [<commit>] DESCRIPTION ----------- In the first and second form, copy entries from <commit> to the index. -In the third form, set the current branch to <commit>, optionally -modifying index and worktree to match. The <commit> defaults to HEAD +In the third form, set the current branch head (HEAD) to <commit>, optionally +modifying index and working tree to match. The <commit> defaults to HEAD in all forms. 'git reset' [-q] [<commit>] [--] <paths>...:: This form resets the index entries for all <paths> to their - state at the <commit>. (It does not affect the worktree, nor + state at <commit>. (It does not affect the working tree, nor the current branch.) + This means that `git reset <paths>` is the opposite of `git add <paths>`. - -'git reset' --patch|-p [<commit>] [--] [<paths>...]:: ++ +After running `git reset <paths>` to update the index entry, you can +use linkgit:git-checkout[1] to check the contents out of the index to +the working tree. +Alternatively, using linkgit:git-checkout[1] and specifying a commit, you +can copy the contents of a path out of a commit to the index and to the +working tree in one go. + +'git reset' (--patch | -p) [<commit>] [--] [<paths>...]:: Interactively select hunks in the difference between the index and <commit> (defaults to HEAD). The chosen hunks are applied in reverse to the index. + -This means that `git reset -p` is the opposite of `git add -p` (see -linkgit:git-add[1]). - -'git reset' [--<mode>] [<commit>]:: - This form points the current branch to <commit> and then - updates index and working tree according to <mode>, which must - be one of the following: +This means that `git reset -p` is the opposite of `git add -p`, i.e. +you can use it to selectively reset hunks. See the ``Interactive Mode'' +section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. + +'git reset' --<mode> [<commit>]:: + This form resets the current branch head to <commit> and + possibly updates the index (resetting it to the tree of <commit>) and + the working tree depending on <mode>, which + must be one of the following: + -- --soft:: - Does not touch the index file nor the working tree at all, but - requires them to be in a good order. This leaves all your changed - files "Changes to be committed", as 'git status' would - put it. + Does not touch the index file nor the working tree at all (but + resets the head to <commit>, just like all modes do). This leaves + all your changed files "Changes to be committed", as 'git status' + would put it. --mixed:: Resets the index but not the working tree (i.e., the changed files @@ -53,22 +62,25 @@ linkgit:git-add[1]). been updated. This is the default action. --hard:: - Matches the working tree and index to that of the tree being - switched to. Any changes to tracked files in the working tree - since <commit> are lost. + Resets the index and working tree. Any changes to tracked files in the + working tree since <commit> are discarded. --merge:: - Resets the index to match the tree recorded by the named commit, - and updates the files that are different between the named commit - and the current commit in the working tree. + Resets the index and updates the files in the working tree that are + different between <commit> and HEAD, but keeps those which are + different between the index and working tree (i.e. which have changes + which have not been added). + If a file that is different between <commit> and the index has unstaged + changes, reset is aborted. ++ +In other words, --merge does something like a 'git read-tree -u -m <commit>', +but carries forward unmerged index entries. --keep:: - Reset the index to the given commit, keeping local changes in - the working tree since the current commit, while updating - working tree files without local changes to what appears in - the given commit. If a file that is different between the - current commit and the given commit has local changes, reset - is aborted. + Resets index entries and updates files in the working tree that are + different between <commit> and HEAD. + If a file that is different between <commit> and HEAD has local changes, + reset is aborted. -- If you want to undo a commit other than the latest on a branch, @@ -184,7 +196,7 @@ tip of the current branch in ORIG_HEAD, so resetting hard to it brings your index file and the working tree back to that state, and resets the tip of the branch to that commit. -Undo a merge or pull inside a dirty work tree:: +Undo a merge or pull inside a dirty working tree:: + ------------ $ git pull <1> @@ -257,7 +269,7 @@ Suppose you are working on something and you commit it, and then you continue working a bit more, but now you think that what you have in your working tree should be in another branch that has nothing to do with what you committed previously. You can start a new branch and -reset it while keeping the changes in your work tree. +reset it while keeping the changes in your working tree. + ------------ $ git tag start @@ -294,8 +306,10 @@ In these tables, A, B, C and D are some different states of a file. For example, the first line of the first table means that if a file is in state A in the working tree, in state B in the index, in state C in HEAD and in state D in the target, then "git reset --soft -target" will put the file in state A in the working tree, in state B -in the index and in state D in HEAD. +target" will leave the file in the working tree in state A and in the +index in state B. It resets (i.e. moves) the HEAD (i.e. the tip of +the current branch, if you are on one) to "target" (which has the file +in state D). working index HEAD target working index HEAD ---------------------------------------------------- @@ -346,11 +360,11 @@ in the index and in state D in HEAD. --keep B C C "reset --merge" is meant to be used when resetting out of a conflicted -merge. Any mergy operation guarantees that the work tree file that is +merge. Any mergy operation guarantees that the working tree file that is involved in the merge does not have local change wrt the index before -it starts, and that it writes the result out to the work tree. So if +it starts, and that it writes the result out to the working tree. So if we see some difference between the index and the target and also -between the index and the work tree, then it means that we are not +between the index and the working tree, then it means that we are not resetting out from a state that a mergy operation left after failing with a conflict. That is why we disallow --merge option in this case. @@ -384,15 +398,6 @@ entries: X means any state and U means an unmerged index. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 173f3fc785..38fafcaa6b 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -9,35 +9,43 @@ git-rev-list - Lists commit objects in reverse chronological order SYNOPSIS -------- [verse] -'git rev-list' [ \--max-count=number ] - [ \--skip=number ] - [ \--max-age=timestamp ] - [ \--min-age=timestamp ] +'git rev-list' [ \--max-count=<number> ] + [ \--skip=<number> ] + [ \--max-age=<timestamp> ] + [ \--min-age=<timestamp> ] [ \--sparse ] [ \--merges ] [ \--no-merges ] + [ \--min-parents=<number> ] + [ \--no-min-parents ] + [ \--max-parents=<number> ] + [ \--no-max-parents ] [ \--first-parent ] [ \--remove-empty ] [ \--full-history ] [ \--not ] [ \--all ] - [ \--branches[=pattern] ] - [ \--tags[=pattern] ] - [ \--remotes[=pattern] ] - [ \--glob=glob-pattern ] + [ \--branches[=<pattern>] ] + [ \--tags[=<pattern>] ] + [ \--remotes[=<pattern>] ] + [ \--glob=<glob-pattern> ] + [ \--ignore-missing ] [ \--stdin ] [ \--quiet ] [ \--topo-order ] [ \--parents ] [ \--timestamp ] [ \--left-right ] + [ \--left-only ] + [ \--right-only ] + [ \--cherry-mark ] [ \--cherry-pick ] [ \--encoding[=<encoding>] ] [ \--(author|committer|grep)=<pattern> ] [ \--regexp-ignore-case | -i ] [ \--extended-regexp | -E ] [ \--fixed-strings | -F ] - [ \--date={local|relative|default|iso|rfc|short} ] + [ \--date=(local|relative|default|iso|rfc|short) ] [ [\--objects | \--objects-edge] [ \--unpacked ] ] [ \--pretty | \--header ] [ \--bisect ] @@ -105,16 +113,6 @@ include::rev-list-options.txt[] include::pretty-formats.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano, Jonas Fonseca -and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 341ca90c6e..8023dc086d 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -8,6 +8,7 @@ git-rev-parse - Pick out and massage parameters SYNOPSIS -------- +[verse] 'git rev-parse' [ --option ] <args>... DESCRIPTION @@ -95,7 +96,7 @@ OPTIONS unfortunately named tag "master"), and show them as full refnames (e.g. "refs/heads/master"). ---abbrev-ref[={strict|loose}]:: +--abbrev-ref[=(strict|loose)]:: A non-ambiguous short name of the objects name. The option core.warnAmbiguousRefs is used to select the strict abbreviation mode. @@ -136,7 +137,12 @@ appending `/{asterisk}`. directory (typically a sequence of "../", or an empty string). --git-dir:: - Show `$GIT_DIR` if defined else show the path to the .git directory. + Show `$GIT_DIR` if defined. Otherwise show the path to + the .git directory, relative to the current directory. ++ +If `$GIT_DIR` is not defined and the current directory +is not detected to lie in a git repository or work tree +print a message to stderr and exit with nonzero status. --is-inside-git-dir:: When the current working directory is below the repository @@ -174,6 +180,10 @@ appending `/{asterisk}`. <args>...:: Flags and parameters to be parsed. +--resolve-git-dir <path>:: + Check if <path> is a valid git-dir or a git-file pointing to a valid + git-dir. If <path> is a valid git-dir the resolved path to git-dir will + be printed. include::revisions.txt[] @@ -303,16 +313,6 @@ $ git rev-parse --default master --verify $REV + but if $REV is empty, the commit object name from master will be printed. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> . -Junio C Hamano <gitster@pobox.com> and Pierre Habouzit <madcoder@debian.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b7d9ef7e47..b699a3458e 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -7,7 +7,11 @@ git-revert - Revert some existing commits SYNOPSIS -------- +[verse] 'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit>... +'git revert' --continue +'git revert' --quit +'git revert' --abort DESCRIPTION ----------- @@ -23,7 +27,7 @@ throw away all uncommitted changes in your working directory, you should see linkgit:git-reset[1], particularly the '--hard' option. If you want to extract specific files as they were in another commit, you should see linkgit:git-checkout[1], specifically the `git checkout -<commit> -- <filename>` syntax. Take care with these alternatives as +<commit> \-- <filename>` syntax. Take care with these alternatives as both will discard uncommitted changes in your working directory. OPTIONS @@ -31,7 +35,7 @@ OPTIONS <commit>...:: Commits to revert. For a more complete list of ways to spell commit names, see - linkgit:gitrevisions[1]. + linkgit:gitrevisions[7]. Sets of commits can also be given but no traversal is done by default, see linkgit:git-rev-list[1] and its '--no-walk' option. @@ -80,14 +84,28 @@ effect to your index in a row. --signoff:: Add Signed-off-by line at the end of the commit message. +--strategy=<strategy>:: + Use the given merge strategy. Should only be used once. + See the MERGE STRATEGIES section in linkgit:git-merge[1] + for details. + +-X<option>:: +--strategy-option=<option>:: + Pass the merge strategy-specific option through to the + merge strategy. See linkgit:git-merge[1] for details. + +SEQUENCER SUBCOMMANDS +--------------------- +include::sequencer.txt[] + EXAMPLES -------- -git revert HEAD~3:: +`git revert HEAD~3`:: Revert the changes specified by the fourth last commit in HEAD and create a new commit with the reverted changes. -git revert -n master\~5..master~2:: +`git revert -n master{tilde}5..master{tilde}2`:: Revert the changes done by commits from the fifth last commit in master (included) to the third last commit in master @@ -95,14 +113,6 @@ git revert -n master\~5..master~2:: changes. The revert only modifies the working tree and the index. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - SEE ALSO -------- linkgit:git-cherry-pick[1] diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 71e3d9fc23..665ad4ddab 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -7,6 +7,7 @@ git-rm - Remove files from the working tree and from the index SYNOPSIS -------- +[verse] 'git rm' [-f | --force] [-n] [-r] [--cached] [--ignore-unmatch] [--quiet] [--] <file>... DESCRIPTION @@ -89,8 +90,8 @@ the paths that have disappeared from the filesystem. However, depending on the use case, there are several ways that can be done. -Using "git commit -a" -~~~~~~~~~~~~~~~~~~~~~ +Using ``git commit -a'' +~~~~~~~~~~~~~~~~~~~~~~~ If you intend that your next commit should record all modifications of tracked files in the working tree and record all removals of files that have been removed from the working tree with `rm` @@ -98,8 +99,8 @@ files that have been removed from the working tree with `rm` automatically notice and record all removals. You can also have a similar effect without committing by using `git add -u`. -Using "git add -A" -~~~~~~~~~~~~~~~~~~ +Using ``git add -A'' +~~~~~~~~~~~~~~~~~~~~ When accepting a new code drop for a vendor branch, you probably want to record both the removal of paths and additions of new paths as well as modifications of existing paths. @@ -111,8 +112,8 @@ tree using this command: git ls-files -z | xargs -0 rm -f ---------------- -and then "untar" the new code in the working tree. Alternately -you could "rsync" the changes into the working tree. +and then untar the new code in the working tree. Alternately +you could 'rsync' the changes into the working tree. After that, the easiest way to record all removals, additions, and modifications in the working tree is: @@ -136,7 +137,7 @@ git diff --name-only --diff-filter=D -z | xargs -0 git rm --cached EXAMPLES -------- -git rm Documentation/\*.txt:: +`git rm Documentation/\*.txt`:: Removes all `*.txt` files from the index that are under the `Documentation` directory and any of its subdirectories. + @@ -144,7 +145,7 @@ Note that the asterisk `*` is quoted from the shell in this example; this lets git, and not the shell, expand the pathnames of files and subdirectories under the `Documentation/` directory. -git rm -f git-*.sh:: +`git rm -f git-*.sh`:: Because this example lets the shell expand the asterisk (i.e. you are listing the files explicitly), it does not remove `subdir/git-foo.sh`. @@ -153,14 +154,6 @@ SEE ALSO -------- linkgit:git-add[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index c283084272..327233c85b 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -8,6 +8,7 @@ git-send-email - Send a collection of patches as emails SYNOPSIS -------- +[verse] 'git send-email' [options] <file|directory|rev-list options>... @@ -82,11 +83,26 @@ See the CONFIGURATION section for 'sendemail.multiedit'. set, as returned by "git var -l". --in-reply-to=<identifier>:: - Specify the contents of the first In-Reply-To header. - Subsequent emails will refer to the previous email - instead of this if --chain-reply-to is set. - Only necessary if --compose is also set. If --compose - is not set, this will be prompted for. + Make the first mail (or all the mails with `--no-thread`) appear as a + reply to the given Message-Id, which avoids breaking threads to + provide a new patch series. + The second and subsequent emails will be sent as replies according to + the `--[no]-chain-reply-to` setting. ++ +So for example when `--thread` and `--no-chain-reply-to` are specified, the +second and subsequent patches will be replies to the first one like in the +illustration below where `[PATCH v2 0/3]` is in reply to `[PATCH 0/2]`: ++ + [PATCH 0/2] Here is what I did... + [PATCH 1/2] Clean up and tests + [PATCH 2/2] Implementation + [PATCH v2 0/3] Here is a reroll + [PATCH v2 1/3] Clean up + [PATCH v2 2/3] New tests + [PATCH v2 3/3] Implementation ++ +Only necessary if --compose is also set. If --compose +is not set, this will be prompted for. --subject=<string>:: Specify the initial subject of the email thread. @@ -97,7 +113,7 @@ See the CONFIGURATION section for 'sendemail.multiedit'. Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the 'sendemail.to' configuration value; if that is unspecified, - this will be prompted for. + and --to-cmd is not specified, this will be prompted for. + The --to option must be repeated for each user you want on the to list. @@ -165,6 +181,15 @@ user is prompted for a password while the input is masked for privacy. are also accepted. The port can also be set with the 'sendemail.smtpserverport' configuration variable. +--smtp-server-option=<option>:: + If set, specifies the outgoing SMTP server option to use. + Default value can be specified by the 'sendemail.smtpserveroption' + configuration option. ++ +The --smtp-server-option option must be repeated for each option you want +to pass to the server. Likewise, different lines in the configuration files +must be used for each option. + --smtp-ssl:: Legacy alias for '--smtp-encryption ssl'. @@ -177,6 +202,12 @@ user is prompted for a password while the input is masked for privacy. Automating ~~~~~~~~~~ +--to-cmd=<command>:: + Specify a command to execute once per patch file which + should generate patch file specific "To:" entries. + Output of this command must be single email address per line. + Default is the value of 'sendemail.tocmd' configuration value. + --cc-cmd=<command>:: Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. @@ -292,6 +323,9 @@ have been specified, in which case default to 'compose'. Default is the value of 'sendemail.validate'; if this is not set, default to '--validate'. +--force:: + Send emails even if safety checks would prevent it. + CONFIGURATION ------------- @@ -315,11 +349,12 @@ sendemail.confirm:: one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' in the previous section for the meaning of these values. - +EXAMPLE +------- Use gmail as the smtp server ----------------------------- - -Add the following section to the config file: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +To use 'git send-email' to send your patches through the GMail SMTP server, +edit ~/.gitconfig to specify your account settings: [sendemail] smtpencryption = tls @@ -327,22 +362,19 @@ Add the following section to the config file: smtpuser = yourname@gmail.com smtpserverport = 587 -Note: the following perl modules are required - Net::SMTP::SSL, MIME::Base64 and Authen::SASL - +Once your commits are ready to be sent to the mailing list, run the +following commands: -Author ------- -Written by Ryan Anderson <ryan@michonline.com> + $ git format-patch --cover-letter -M origin/master -o outgoing/ + $ edit outgoing/0000-* + $ git send-email outgoing/* -git-send-email is originally based upon -send_lots_of_email.pl by Greg Kroah-Hartman. - - -Documentation --------------- -Documentation by Ryan Anderson +Note: the following perl modules are required + Net::SMTP::SSL, MIME::Base64 and Authen::SASL +SEE ALSO +-------- +linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5) GIT --- diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index deaa7d9654..bd3eaa69bf 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -8,6 +8,7 @@ git-send-pack - Push objects over git protocol to another repository SYNOPSIS -------- +[verse] 'git send-pack' [--all] [--dry-run] [--force] [--receive-pack=<git-receive-pack>] [--verbose] [--thin] [<host>:]<directory> [<ref>...] DESCRIPTION @@ -114,15 +115,6 @@ With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-i18n--envsubst.txt b/Documentation/git-sh-i18n--envsubst.txt new file mode 100644 index 0000000000..5c3ec327bb --- /dev/null +++ b/Documentation/git-sh-i18n--envsubst.txt @@ -0,0 +1,36 @@ +git-sh-i18n{litdd}envsubst(1) +============================= + +NAME +---- +git-sh-i18n--envsubst - Git's own envsubst(1) for i18n fallbacks + +SYNOPSIS +-------- +[verse] +eval_gettext () { + printf "%s" "$1" | ( + export PATH $('git sh-i18n{litdd}envsubst' --variables "$1"); + 'git sh-i18n{litdd}envsubst' "$1" + ) +} + +DESCRIPTION +----------- + +This is not a command the end user would want to run. Ever. +This documentation is meant for people who are studying the +plumbing scripts and/or are writing new ones. + +'git sh-i18n{litdd}envsubst' is Git's stripped-down copy of the GNU +`envsubst(1)` program that comes with the GNU gettext package. It's +used internally by linkgit:git-sh-i18n[1] to interpolate the variables +passed to the the `eval_gettext` function. + +No promises are made about the interface, or that this +program won't disappear without warning in the next version +of Git. Don't use it. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-i18n.txt b/Documentation/git-sh-i18n.txt new file mode 100644 index 0000000000..60cf49cb2a --- /dev/null +++ b/Documentation/git-sh-i18n.txt @@ -0,0 +1,43 @@ +git-sh-i18n(1) +============== + +NAME +---- +git-sh-i18n - Git's i18n setup code for shell scripts + +SYNOPSIS +-------- +[verse] +'. "$(git --exec-path)/git-sh-i18n"' + +DESCRIPTION +----------- + +This is not a command the end user would want to run. Ever. +This documentation is meant for people who are studying the +Porcelain-ish scripts and/or are writing new ones. + +The 'git sh-i18n scriptlet is designed to be sourced (using +`.`) by Git's porcelain programs implemented in shell +script. It provides wrappers for the GNU `gettext` and +`eval_gettext` functions accessible through the `gettext.sh` +script, and provides pass-through fallbacks on systems +without GNU gettext. + +FUNCTIONS +--------- + +gettext:: + Currently a dummy fall-through function implemented as a wrapper + around `printf(1)`. Will be replaced by a real gettext + implementation in a later version. + +eval_gettext:: + Currently a dummy fall-through function implemented as a wrapper + around `printf(1)` with variables expanded by the + linkgit:git-sh-i18n{litdd}envsubst[1] helper. Will be replaced by a + real gettext implementation in a later version. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 3da241304b..a2f346ca71 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -7,6 +7,7 @@ git-sh-setup - Common git shell script setup code SYNOPSIS -------- +[verse] '. "$(git --exec-path)/git-sh-setup"' DESCRIPTION @@ -58,23 +59,19 @@ cd_to_toplevel:: runs chdir to the toplevel of the working tree. require_work_tree:: - checks if the repository is a bare repository, and dies - if so. Used by scripts that require working tree - (e.g. `checkout`). + checks if the current directory is within the working tree + of the repository, and otherwise dies. + +require_work_tree_exists:: + checks if the working tree associated with the repository + exists, and otherwise dies. Often done before calling + cd_to_toplevel, which is impossible to do if there is no + working tree. get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt index 0f3ad811cf..9b9250600f 100644 --- a/Documentation/git-shell.txt +++ b/Documentation/git-shell.txt @@ -3,32 +3,31 @@ git-shell(1) NAME ---- -git-shell - Restricted login shell for GIT-only SSH access +git-shell - Restricted login shell for Git-only SSH access SYNOPSIS -------- -'$(git --exec-path)/git-shell' -c <command> <argument> +[verse] +'git shell' [-c <command> <argument>] DESCRIPTION ----------- -This is meant to be used as a login shell for SSH accounts you want -to restrict to GIT pull/push access only. It permits execution only -of server-side GIT commands implementing the pull/push functionality. -The commands can be executed only by the '-c' option; the shell is not -interactive. - -Currently, only four commands are permitted to be called, 'git-receive-pack' -'git-upload-pack' and 'git-upload-archive' with a single required argument, or -'cvs server' (to invoke 'git-cvsserver'). - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Petr Baudis and the git-list <git@vger.kernel.org>. + +A login shell for SSH accounts to provide restricted Git access. When +'-c' is given, the program executes <command> non-interactively; +<command> can be one of 'git receive-pack', 'git upload-pack', 'git +upload-archive', 'cvs server', or a command in COMMAND_DIR. The shell +is started in interactive mode when no arguments are given; in this +case, COMMAND_DIR must exist, and any of the executables in it can be +invoked. + +'cvs server' is a special command which executes git-cvsserver. + +COMMAND_DIR is the path "$HOME/git-shell-commands". The user must have +read and execute permissions to the directory in order to execute the +programs in it. The programs are executed with a cwd of $HOME, and +<argument> is parsed as a command-line string. GIT --- diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index bc1ac77495..ff3755b4c7 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -44,7 +44,7 @@ OPTIONS --email:: Show the email address of each author. ---format[='<format>']:: +--format[=<format>]:: Instead of the commit subject, use some other information to describe each commit. '<format>' can be any string accepted by the `--format` option of 'git log', such as '{asterisk} [%h] %s'. @@ -68,15 +68,6 @@ spelled differently. include::mailmap.txt[] - -Author ------- -Written by Jeff Garzik <jgarzik@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 6453263340..a8e77b5350 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -12,8 +12,7 @@ SYNOPSIS [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] - [<rev> | <glob>]... - + [(<rev> | <glob>)...] 'git show-branch' (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>] DESCRIPTION @@ -32,7 +31,7 @@ no <rev> nor <glob> is given on the command line. OPTIONS ------- <rev>:: - Arbitrary extended SHA1 expression (see linkgit:gitrevisions[1]) + Arbitrary extended SHA1 expression (see linkgit:gitrevisions[7]) that typically names a branch head or a tag. <glob>:: @@ -200,17 +199,6 @@ shows 10 reflog entries going back from the tip as of 1 hour ago. Without `--list`, the output also shows how these tips are topologically related with each other. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt index 8382fbe0ec..2dcbbb2454 100644 --- a/Documentation/git-show-index.txt +++ b/Documentation/git-show-index.txt @@ -8,6 +8,7 @@ git-show-index - Show packed archive index SYNOPSIS -------- +[verse] 'git show-index' < idx-file @@ -20,15 +21,6 @@ The information it outputs is subset of what you can get from 'git verify-pack -v'; this command only shows the packfile offset and SHA1 of each object. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 4696af7433..3c45895299 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -84,7 +84,11 @@ OPTIONS <pattern>...:: - Show references matching one or more patterns. + Show references matching one or more patterns. Patterns are matched from + the end of the full name, and only complete parts are matched, e.g. + 'master' matches 'refs/heads/master', 'refs/remotes/origin/master', + 'refs/tags/jedi/master' but not 'refs/heads/mymaster' nor + 'refs/remotes/master/jedi'. OUTPUT ------ @@ -173,11 +177,6 @@ linkgit:git-ls-remote[1], linkgit:git-update-ref[1], linkgit:gitrepository-layout[5] -AUTHORS -------- -Written by Linus Torvalds <torvalds@osdl.org>. -Man page by Jonas Fonseca <fonseca@diku.dk>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 0002bfb045..1e38819e67 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -8,6 +8,7 @@ git-show - Show various types of objects SYNOPSIS -------- +[verse] 'git show' [options] <object>... DESCRIPTION @@ -36,7 +37,7 @@ OPTIONS <object>...:: The names of objects to show. For a more complete list of ways to spell object names, see - "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. + "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7]. include::pretty-options.txt[] @@ -47,19 +48,23 @@ include::pretty-formats.txt[] EXAMPLES -------- -git show v1.0.0:: +`git show v1.0.0`:: Shows the tag `v1.0.0`, along with the object the tags points at. -git show v1.0.0^\{tree\}:: +`git show v1.0.0^\{tree\}`:: Shows the tree pointed to by the tag `v1.0.0`. -git show next~10:Documentation/README:: +`git show -s --format=%s v1.0.0^\{commit\}`:: + Shows the subject of the commit pointed to by the + tag `v1.0.0`. + +`git show next~10:Documentation/README`:: Shows the contents of the file `Documentation/README` as they were current in the 10th last commit of the branch `next`. -git show master:Makefile master:t/Makefile:: +`git show master:Makefile master:t/Makefile`:: Concatenates the contents of said Makefiles in the head of the branch `master`. @@ -68,17 +73,6 @@ Discussion include::i18n.txt[] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com>. Significantly enhanced by -Johannes Schindelin <Johannes.Schindelin@gmx.de>. - - -Documentation -------------- -Documentation by David Greaves, Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-stage.txt b/Documentation/git-stage.txt index 7f251a5865..ba3fe0d7f5 100644 --- a/Documentation/git-stage.txt +++ b/Documentation/git-stage.txt @@ -17,3 +17,7 @@ DESCRIPTION This is a synonym for linkgit:git-add[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 8728f7a514..43af38aa4b 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -13,7 +13,8 @@ SYNOPSIS 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] -'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]] +'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] + [-u|--include-untracked] [-a|--all] [<message>]] 'git stash' clear 'git stash' create @@ -42,7 +43,7 @@ is also possible). OPTIONS ------- -save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: +save [-p|--patch] [--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [<message>]:: Save your local modifications to a new 'stash', and run `git reset --hard` to revert them. The <message> part is optional and gives @@ -54,12 +55,18 @@ save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: If the `--keep-index` option is used, all changes already added to the index are left intact. + -With `--patch`, you can interactively select hunks from in the diff +If the `--include-untracked` option is used, all untracked files are also +stashed and then cleaned up with `git clean`, leaving the working directory +in a very clean state. If the `--all` option is used instead then the +ignored files are stashed and cleaned in addition to the untracked files. ++ +With `--patch`, you can interactively select hunks from the diff between HEAD and the working tree to be stashed. The stash entry is constructed such that its index state is the same as the index state of your repository, and its worktree contains only the changes you selected interactively. The selected changes are then rolled back -from your worktree. +from your worktree. See the ``Interactive Mode'' section of +linkgit:git-add[1] to learn how to operate the `\--patch` mode. + The `--patch` option implies `--keep-index`. You can use `--no-keep-index` to override this. @@ -257,10 +264,6 @@ linkgit:git-commit[1], linkgit:git-reflog[1], linkgit:git-reset[1] -AUTHOR ------- -Written by Nanako Shiraishi <nanako3@bluebottle.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index dae190a5f2..3d51717bbe 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -8,6 +8,7 @@ git-status - Show the working tree status SYNOPSIS -------- +[verse] 'git status' [<options>...] [--] [<pathspec>...] DESCRIPTION @@ -32,26 +33,27 @@ OPTIONS Show the branch and tracking info even in short-format. --porcelain:: - Give the output in a stable, easy-to-parse format for scripts. - Currently this is identical to --short output, but is guaranteed - not to change in the future, making it safe for scripts. + Give the output in an easy-to-parse format for scripts. + This is similar to the short output, but will remain stable + across git versions and regardless of user configuration. See + below for details. -u[<mode>]:: --untracked-files[=<mode>]:: - Show untracked files (Default: 'all'). + Show untracked files. + -The mode parameter is optional, and is used to specify -the handling of untracked files. The possible options are: +The mode parameter is optional (defaults to 'all'), and is used to +specify the handling of untracked files; when -u is not used, the +default is 'normal', i.e. show untracked files and directories. ++ +The possible options are: + --- - 'no' - Show no untracked files - 'normal' - Shows untracked files and directories - 'all' - Also shows individual files in untracked directories. --- + -See linkgit:git-config[1] for configuration variable -used to change the default for when the option is not -specified. +The default can be changed using the status.showUntrackedFiles +configuration variable documented in linkgit:git-config[1]. --ignore-submodules[=<when>]:: Ignore changes to submodules when looking for changes. <when> can be @@ -68,6 +70,9 @@ specified. (and suppresses the output of submodule summaries when the config option `status.submodulesummary` is set). +--ignored:: + Show ignored files as well. + -z:: Terminate entries with NUL, instead of LF. This implies the `--porcelain` output format if no other format is given. @@ -78,23 +83,27 @@ OUTPUT The output from this command is designed to be used as a commit template comment, and all the output lines are prefixed with '#'. The default, long format, is designed to be human readable, -verbose and descriptive. They are subject to change in any time. +verbose and descriptive. Its contents and format are subject to change +at any time. The paths mentioned in the output, unlike many other git commands, are made relative to the current directory if you are working in a subdirectory (this is on purpose, to help cutting and pasting). See the status.relativePaths config option below. -In short-format, the status of each path is shown as +Short Format +~~~~~~~~~~~~ + +In the short-format, the status of each path is shown as XY PATH1 -> PATH2 -where `PATH1` is the path in the `HEAD`, and ` -> PATH2` part is +where `PATH1` is the path in the `HEAD`, and the ` \-> PATH2` part is shown only when `PATH1` corresponds to a different path in the index/worktree (i.e. the file is renamed). The 'XY' is a two-letter status code. -The fields (including the `->`) are separated from each other by a +The fields (including the `\->`) are separated from each other by a single space. If a filename contains whitespace or other nonprintable characters, that field will be quoted in the manner of a C string literal: surrounded by ASCII double quote (34) characters, and with @@ -114,7 +123,8 @@ codes can be interpreted as follows: * 'C' = copied * 'U' = updated but unmerged -Ignored files are not listed. +Ignored files are not listed, unless `--ignored` option is in effect, +in which case `XY` are `!!`. X Y Meaning ------------------------------------------------- @@ -137,16 +147,32 @@ Ignored files are not listed. U U unmerged, both modified ------------------------------------------------- ? ? untracked + ! ! ignored ------------------------------------------------- If -b is used the short-format status is preceded by a line ## branchname tracking info -There is an alternate -z format recommended for machine parsing. In +Porcelain Format +~~~~~~~~~~~~~~~~ + +The porcelain format is similar to the short format, but is guaranteed +not to change in a backwards-incompatible way between git versions or +based on user configuration. This makes it ideal for parsing by scripts. +The description of the short format above also describes the porcelain +format, with a few exceptions: + +1. The user's color.status configuration is not respected; color will + always be off. + +2. The user's status.relativePaths configuration is not respected; paths + shown will always be relative to the repository root. + +There is also an alternate -z format recommended for machine parsing. In that format, the status field is the same, but some other things -change. First, the '->' is omitted from rename entries and the field -order is reversed (e.g 'from -> to' becomes 'to from'). Second, a NUL +change. First, the '\->' is omitted from rename entries and the field +order is reversed (e.g 'from \-> to' becomes 'to from'). Second, a NUL (ASCII 0) follows each filename, replacing space as a field separator and the terminating newline (but a space still separates the status field from the first filename). Third, filenames containing special @@ -174,14 +200,6 @@ SEE ALSO -------- linkgit:gitignore[5] -Author ------- -Written by Junio C Hamano <gitster@pobox.com>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt index 7508c0e42d..b78f031cd4 100644 --- a/Documentation/git-stripspace.txt +++ b/Documentation/git-stripspace.txt @@ -8,6 +8,7 @@ git-stripspace - Filter out empty lines SYNOPSIS -------- +[verse] 'git stripspace' [-s | --strip-comments] < <stream> DESCRIPTION @@ -23,14 +24,6 @@ OPTIONS <stream>:: Byte stream to act on. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1ed331c599..6ec3fef079 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -15,7 +15,8 @@ SYNOPSIS 'git submodule' [--quiet] init [--] [<path>...] 'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...] -'git submodule' [--quiet] summary [--cached|--files] [--summary-limit <n>] [commit] [--] [<path>...] +'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] + [commit] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> 'git submodule' [--quiet] sync [--] [<path>...] @@ -78,7 +79,9 @@ to exist in the superproject. If <path> is not given, the <repository> is the URL of the new submodule's origin repository. This may be either an absolute URL, or (if it begins with ./ or ../), the location relative to the superproject's origin -repository. +repository. If the superproject doesn't have an origin configured +the superproject is its own authoritative upstream and the current +working directory is used instead. + <path> is the relative location for the cloned submodule to exist in the superproject. If <path> does not exist, then the @@ -101,16 +104,24 @@ status:: currently checked out commit for each submodule, along with the submodule path and the output of 'git describe' for the SHA-1. Each SHA-1 will be prefixed with `-` if the submodule is not - initialized and `+` if the currently checked out submodule commit + initialized, `+` if the currently checked out submodule commit does not match the SHA-1 found in the index of the containing - repository. This command is the default command for 'git submodule'. + repository and `U` if the submodule has merge conflicts. + This command is the default command for 'git submodule'. + -If '--recursive' is specified, this command will recurse into nested +If `--recursive` is specified, this command will recurse into nested submodules, and show their status as well. ++ +If you are only interested in changes of the currently initialized +submodules with respect to the commit recorded in the index or the HEAD, +linkgit:git-status[1] and linkgit:git-diff[1] will provide that information +too (and can also report changes to a submodule's work tree). init:: Initialize the submodules, i.e. register each submodule name and url found in .gitmodules into .git/config. + It will also copy the value of `submodule.$name.update` into + .git/config. The key used in .git/config is `submodule.$name.url`. This command does not alter existing information in .git/config. You can then customize the submodule clone URLs in .git/config @@ -122,26 +133,33 @@ init:: update:: Update the registered submodules, i.e. clone missing submodules and checkout the commit specified in the index of the containing repository. - This will make the submodules HEAD be detached unless '--rebase' or - '--merge' is specified or the key `submodule.$name.update` is set to - `rebase` or `merge`. + This will make the submodules HEAD be detached unless `--rebase` or + `--merge` is specified or the key `submodule.$name.update` is set to + `rebase`, `merge` or `none`. + If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the -submodule with the --init option. +submodule with the `--init` option. + -If '--recursive' is specified, this command will recurse into the +If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. ++ +If the configuration key `submodule.$name.update` is set to `none` the +submodule with name `$name` will not be updated by default. This can be +overriden by adding `--checkout` to the command. summary:: Show commit summary between the given commit (defaults to HEAD) and working tree/index. For a submodule in question, a series of commits in the submodule between the given super project commit and the - index or working tree (switched by --cached) are shown. If the option - --files is given, show the series of commits in the submodule between + index or working tree (switched by `--cached`) are shown. If the option + `--files` is given, show the series of commits in the submodule between the index of the super project and the working tree of the submodule - (this option doesn't allow to use the --cached option or to provide an + (this option doesn't allow to use the `--cached` option or to provide an explicit commit). ++ +Using the `--submodule=log` option with linkgit:git-diff[1] will provide that +information too. foreach:: Evaluates an arbitrary shell command in each checked out submodule. @@ -152,9 +170,9 @@ foreach:: superproject, $sha1 is the commit as recorded in the superproject, and $toplevel is the absolute path to the top-level of the superproject. Any submodules defined in the superproject but not checked out are - ignored by this command. Unless given --quiet, foreach prints the name + ignored by this command. Unless given `--quiet`, foreach prints the name of each submodule before evaluating the command. - If --recursive is given, submodules are traversed recursively (i.e. + If `--recursive` is given, submodules are traversed recursively (i.e. the given shell command is evaluated in nested submodules as well). A non-zero return from the command in any submodule causes the processing to terminate. This can be overridden by adding '|| :' @@ -166,12 +184,14 @@ commit for each submodule. sync:: Synchronizes submodules' remote URL configuration setting - to the value specified in .gitmodules. This is useful when + to the value specified in .gitmodules. It will only affect those + submodules which already have an url entry in .git/config (that is the + case when they are initialized or freshly added). This is useful when submodule URLs change upstream and you need to update your local repositories accordingly. + "git submodule sync" synchronizes all submodules while -"git submodule sync -- A" synchronizes submodule "A" only. +"git submodule sync \-- A" synchronizes submodule "A" only. OPTIONS ------- @@ -185,8 +205,10 @@ OPTIONS -f:: --force:: - This option is only valid for the add command. - Allow adding an otherwise ignored submodule path. + This option is only valid for add and update commands. + When running add, allow adding an otherwise ignored submodule path. + When running update, throw away local changes in submodules when + switching to a different commit. --cached:: This option is only valid for status and summary commands. These @@ -230,13 +252,18 @@ OPTIONS If the key `submodule.$name.update` is set to `rebase`, this option is implicit. +--init:: + This option is only valid for the update command. + Initialize all submodules for which "git submodule init" has not been + called so far before updating. + --reference <repository>:: This option is only valid for add and update commands. These commands sometimes need to clone a remote repository. In this case, this option will be passed to the linkgit:git-clone[1] command. + *NOTE*: Do *not* use this option unless you have read the note -for linkgit:git-clone[1]'s --reference and --shared options carefully. +for linkgit:git-clone[1]'s `--reference` and `--shared` options carefully. --recursive:: This option is only valid for foreach, update and status commands. @@ -257,11 +284,6 @@ This file should be formatted in the same way as `$GIT_DIR/config`. The key to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5] for details. - -AUTHOR ------- -Written by Lars Hjemli <hjemli@gmail.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 4b84d08fc8..34ee785064 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -7,6 +7,7 @@ git-svn - Bidirectional operation between a Subversion repository and git SYNOPSIS -------- +[verse] 'git svn' <command> [options] [arguments] DESCRIPTION @@ -56,6 +57,8 @@ COMMANDS as well, they take precedence. --no-metadata;; Set the 'noMetadata' option in the [svn-remote] config. + This option is not recommended, please read the 'svn.noMetadata' + section of this manpage before using this option. --use-svm-props;; Set the 'useSvmProps' option in the [svn-remote] config. --use-svnsync-props;; @@ -64,7 +67,7 @@ COMMANDS Set the 'rewriteRoot' option in the [svn-remote] config. --rewrite-uuid=<UUID>;; Set the 'rewriteUUID' option in the [svn-remote] config. ---username=<USER>;; +--username=<user>;; For transports that SVN handles authentication for (http, https, and plain svn), specify the username. For other transports (eg svn+ssh://), you must include the username in @@ -143,17 +146,6 @@ Skip "branches" and "tags" of first level directories;; ------------------------------------------------------------------------ -- ---use-log-author;; - When retrieving svn commits into git (as part of fetch, rebase, or - dcommit operations), look for the first From: or Signed-off-by: line - in the log message and use that as the author string. ---add-author-from;; - When committing to svn from git (as part of commit or dcommit - operations), if the existing log message doesn't already have a - From: or Signed-off-by: line, append a From: line based on the - git commit's author string. If you use this, then --use-log-author - will retrieve a valid author string for all commits. - 'clone':: Runs 'init' and 'fetch'. It will automatically create a directory based on the basename of the URL passed to it; @@ -165,6 +157,17 @@ Skip "branches" and "tags" of first level directories;; affecting the working tree; and the 'rebase' command will be able to update the working tree with the latest changes. +--preserve-empty-dirs;; + Create a placeholder file in the local Git repository for each + empty directory fetched from Subversion. This includes directories + that become empty by removing all entries in the Subversion + repository (but not the directory itself). The placeholder files + are also tracked and removed when no longer necessary. + +--placeholder-filename=<filename>;; + Set the name of placeholder files created by --preserve-empty-dirs. + Default: ".gitignore" + 'rebase':: This fetches revisions from the SVN parent of the current HEAD and rebases the current (uncommitted to SVN) work against it. @@ -215,6 +218,30 @@ config key: svn.commiturl (overwrites all svn-remote.<name>.commiturl options) Using this option for any other purpose (don't ask) is very strongly discouraged. +--mergeinfo=<mergeinfo>;; + Add the given merge information during the dcommit + (e.g. `--mergeinfo="/branches/foo:1-10"`). All svn server versions can + store this information (as a property), and svn clients starting from + version 1.5 can make use of it. To specify merge information from multiple + branches, use a single space character between the branches + (`--mergeinfo="/branches/foo:1-10 /branches/bar:3,5-6,8"`) ++ +[verse] +config key: svn.pushmergeinfo ++ +This option will cause git-svn to attempt to automatically populate the +svn:mergeinfo property in the SVN repository when possible. Currently, this can +only be done when dcommitting non-fast-forward merges where all parents but the +first have already been pushed into SVN. + +--interactive;; + Ask the user to confirm that a patch set should actually be sent to SVN. + For each patch, one may answer "yes" (accept this patch), "no" (discard this + patch), "all" (accept all patches), or "quit". + + + 'git svn dcommit' returns immediately if answer if "no" or "quit", without + commiting anything to SVN. + 'branch':: Create a branch in the SVN repository. @@ -299,7 +326,7 @@ Any other arguments are passed directly to 'git log' Show what revision and author last modified each line of a file. The output of this mode is format-compatible with the output of `svn blame' by default. Like the SVN blame command, - local uncommitted changes in the working copy are ignored; + local uncommitted changes in the working tree are ignored; the version of the file in the HEAD revision is annotated. Unknown arguments are passed directly to 'git blame'. + @@ -341,6 +368,8 @@ Any other arguments are passed directly to 'git log' Empty directories are automatically recreated when using "git svn clone" and "git svn rebase", so "mkdirs" is intended for use after commands like "git checkout" or "git reset". + (See the svn-remote.<name>.automkdirs config file option for + more information.) 'commit-diff':: Commits the diff of two tree-ish arguments from the @@ -436,13 +465,13 @@ git rebase --onto remotes/git-svn A^ master OPTIONS ------- ---shared[={false|true|umask|group|all|world|everybody}]:: +--shared[=(false|true|umask|group|all|world|everybody)]:: --template=<template_directory>:: Only used with the 'init' command. These are passed directly to 'git init'. --r <ARG>:: ---revision <ARG>:: +-r <arg>:: +--revision <arg>:: Used with the 'fetch' command. + This allows revision ranges for partial/cauterized history @@ -563,6 +592,17 @@ repository that will be fetched from. For 'branch' and 'tag', display the urls that will be used for copying when creating the branch or tag. +--use-log-author:: + When retrieving svn commits into git (as part of 'fetch', 'rebase', or + 'dcommit' operations), look for the first `From:` or `Signed-off-by:` line + in the log message and use that as the author string. +--add-author-from:: + When committing to svn from git (as part of 'commit-diff', 'set-tree' or 'dcommit' + operations), if the existing log message doesn't already have a + `From:` or `Signed-off-by:` line, append a `From:` line based on the + git commit's author string. If you use this, then `--use-log-author` + will retrieve a valid author string for all commits. + ADVANCED OPTIONS ---------------- @@ -597,13 +637,22 @@ svn.noMetadata:: svn-remote.<name>.noMetadata:: This gets rid of the 'git-svn-id:' lines at the end of every commit. + -If you lose your .git/svn/git-svn/.rev_db file, 'git svn' will not -be able to rebuild it and you won't be able to fetch again, -either. This is fine for one-shot imports. +This option can only be used for one-shot imports as 'git svn' +will not be able to fetch again without metadata. Additionally, +if you lose your .git/svn/**/.rev_map.* files, 'git svn' will not +be able to rebuild them. + The 'git svn log' command will not work on repositories using this, either. Using this conflicts with the 'useSvmProps' option for (hopefully) obvious reasons. ++ +This option is NOT recommended as it makes it difficult to track down +old references to SVN revision numbers in existing documentation, bug +reports and archives. If you plan to eventually migrate from SVN to git +and are certain about dropping SVN history, consider +linkgit:git-filter-branch[1] instead. filter-branch also allows +reformatting of metadata for ease-of-reading and rewriting authorship +info for non-"svn.authorsFile" users. svn.useSvmProps:: svn-remote.<name>.useSvmProps:: @@ -637,6 +686,16 @@ svn-remote.<name>.rewriteUUID:: where the original UUID is not available via either useSvmProps or useSvnsyncProps. +svn-remote.<name>.pushurl:: + + Similar to git's 'remote.<name>.pushurl', this key is designed + to be used in cases where 'url' points to an SVN repository + via a read-only transport, to provide an alternate read/write + transport. It is assumed that both keys point to the same + repository. Unlike 'commiturl', 'pushurl' is a base path. If + either 'commiturl' or 'pushurl' could be used, 'commiturl' + takes precedence. + svn.brokenSymlinkWorkaround:: This disables potentially expensive checks to workaround broken symlinks checked into SVN by broken clients. Set this @@ -652,6 +711,14 @@ svn.pathnameencoding:: locales to avoid corrupted file names with non-ASCII characters. Valid encodings are the ones supported by Perl's Encode module. +svn-remote.<name>.automkdirs:: + Normally, the "git svn clone" and "git svn rebase" commands + attempt to recreate empty directories that are in the + Subversion repository. If this option is set to "false", then + empty directories will only be created if the "git svn mkdirs" + command is run explicitly. If unset, 'git svn' assumes this + option to be "true". + Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps options all affect the metadata generated and used by 'git svn'; they *must* be set in the configuration file before any history is imported @@ -718,8 +785,11 @@ have each person clone that repository with 'git clone': cd project git init git remote add origin server:/pub/project - git config --add remote.origin.fetch '+refs/remotes/*:refs/remotes/*' + git config --replace-all remote.origin.fetch '+refs/remotes/*:refs/remotes/*' git fetch +# Prevent fetch/pull from remote git server in the future, +# we only want to use git svn for future updates + git config --remove-section remote.origin # Create a local branch from one of the branches just fetched git checkout -b master FETCH_HEAD # Initialize 'git svn' locally (be sure to use the same URL and -T/-b/-t options as were used on server) @@ -743,10 +813,9 @@ use `git svn rebase` to update your work branch instead of `git pull` or when committing into SVN, which can lead to merge commits reversing previous commits in SVN. -DESIGN PHILOSOPHY ------------------ -Merge tracking in Subversion is lacking and doing branched development -with Subversion can be cumbersome as a result. While 'git svn' can track +MERGE TRACKING +-------------- +While 'git svn' can track copy history (including branches and tags) for repositories adopting a standard layout, it cannot yet represent merge history that happened inside git back upstream to SVN users. Therefore it is advised that @@ -756,16 +825,15 @@ compatibility with SVN (see the CAVEATS section below). CAVEATS ------- -For the sake of simplicity and interoperating with a less-capable system -(SVN), it is recommended that all 'git svn' users clone, fetch and dcommit +For the sake of simplicity and interoperating with Subversion, +it is recommended that all 'git svn' users clone, fetch and dcommit directly from the SVN server, and avoid all 'git clone'/'pull'/'merge'/'push' operations between git repositories and branches. The recommended method of exchanging code between git branches and users is 'git format-patch' and 'git am', or just 'dcommit'ing to the SVN repository. Running 'git merge' or 'git pull' is NOT recommended on a branch you -plan to 'dcommit' from. Subversion does not represent merges in any -reasonable or useful fashion; so users using Subversion cannot see any +plan to 'dcommit' from because Subversion users cannot see any merges you've made. Furthermore, if you merge or pull from a git branch that is a mirror of an SVN branch, 'dcommit' may commit to the wrong branch. @@ -815,7 +883,7 @@ Renamed and copied directories are not detected by git and hence not tracked when committing to SVN. I do not plan on adding support for this as it's quite difficult and time-consuming to get working for all the possible corner cases (git doesn't do it, either). Committing -renamed and copied files are fully supported if they're similar enough +renamed and copied files is fully supported if they're similar enough for git to detect them. CONFIGURATION @@ -864,10 +932,6 @@ SEE ALSO -------- linkgit:git-rebase[1] -Author ------- -Written by Eric Wong <normalperson@yhbt.net>. - -Documentation -------------- -Written by Eric Wong <normalperson@yhbt.net>. +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt index 33a1536294..75b1ae5061 100644 --- a/Documentation/git-symbolic-ref.txt +++ b/Documentation/git-symbolic-ref.txt @@ -7,6 +7,7 @@ git-symbolic-ref - Read and modify symbolic refs SYNOPSIS -------- +[verse] 'git symbolic-ref' [-q] [-m <reason>] <name> [<ref>] DESCRIPTION @@ -53,10 +54,6 @@ and symbolic refs are used by default. symbolic ref were printed correctly, with status 1 if the requested name is not a symbolic ref, or 128 if another error occurs. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 31c78a81e0..c83cb13de6 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -12,27 +12,28 @@ SYNOPSIS 'git tag' [-a | -s | -u <key-id>] [-f] [-m <msg> | -F <file>] <tagname> [<commit> | <object>] 'git tag' -d <tagname>... -'git tag' [-n[<num>]] -l [--contains <commit>] [<pattern>] +'git tag' [-n[<num>]] -l [--contains <commit>] [<pattern>...] 'git tag' -v <tagname>... DESCRIPTION ----------- -Adds a tag reference in `.git/refs/tags/`. +Add a tag reference in `.git/refs/tags/`, unless `-d/-l/-v` is given +to delete, list or verify tags. -Unless `-f` is given, the tag must not yet exist in +Unless `-f` is given, the tag to be created must not yet exist in the `.git/refs/tags/` directory. If one of `-a`, `-s`, or `-u <key-id>` is passed, the command -creates a 'tag' object, and requires the tag message. Unless +creates a 'tag' object, and requires a tag message. Unless `-m <msg>` or `-F <file>` is given, an editor is started for the user to type in the tag message. If `-m <msg>` or `-F <file>` is given and `-a`, `-s`, and `-u <key-id>` are absent, `-a` is implied. -Otherwise just the SHA1 object name of the commit object is -written (i.e. a lightweight tag). +Otherwise just a tag reference for the SHA1 object name of the commit object is +created (i.e. a lightweight tag). A GnuPG signed tag object will be created when `-s` or `-u <key-id>` is used. When `-u <key-id>` is not used, the @@ -42,12 +43,15 @@ GnuPG key for signing. OPTIONS ------- -a:: +--annotate:: Make an unsigned, annotated tag object -s:: +--sign:: Make a GPG-signed tag, using the default e-mail address's key -u <key-id>:: +--local-user=<key-id>:: Make a GPG-signed tag, using the given key -f:: @@ -55,9 +59,11 @@ OPTIONS Replace an existing tag with the given name (instead of failing) -d:: +--delete:: Delete existing tags with the given names. -v:: +--verify:: Verify the gpg signature of the given tag names. -n<num>:: @@ -68,13 +74,18 @@ OPTIONS If the tag is not annotated, the commit message is displayed instead. -l <pattern>:: - List tags with names that match the given pattern (or all if no pattern is given). - Typing "git tag" without arguments, also lists all tags. +--list <pattern>:: + List tags with names that match the given pattern (or all if no + pattern is given). Running "git tag" without arguments also + lists all tags. The pattern is a shell wildcard (i.e., matched + using fnmatch(3)). Multiple patterns may be given; if any of + them matches, the tag is shown. --contains <commit>:: Only list tags which contain the specified commit. -m <msg>:: +--message=<msg>:: Use the given tag message (instead of prompting). If multiple `-m` options are given, their values are concatenated as separate paragraphs. @@ -82,6 +93,7 @@ OPTIONS is given. -F <file>:: +--file=<file>:: Take the tag message from the given file. Use '-' to read the message from the standard input. Implies `-a` if none of `-a`, `-s`, or `-u <key-id>` @@ -164,20 +176,19 @@ You can test which tag you have by doing which should return 0123456789abcdef.. if you have the new version. -Sorry for inconvenience. +Sorry for the inconvenience. ------------ Does this seem a bit complicated? It *should* be. There is no -way that it would be correct to just "fix" it behind peoples -backs. People need to know that their tags might have been -changed. +way that it would be correct to just "fix" it automatically. +People need to know that their tags might have been changed. On Automatic following ~~~~~~~~~~~~~~~~~~~~~~ If you are following somebody else's tree, you are most likely -using tracking branches (`refs/heads/origin` in traditional +using remote-tracking branches (`refs/heads/origin` in traditional layout, or `refs/remotes/origin/master` in the separate-remote layout). You usually want the tags from the other end. @@ -188,9 +199,10 @@ the toplevel but not limited to them. Mere mortals when pulling from each other do not necessarily want to automatically get private anchor point tags from the other person. -You would notice "please pull" messages on the mailing list says -repo URL and branch name alone. This is designed to be easily -cut&pasted to a 'git fetch' command line: +Often, "please pull" messages on the mailing list just provide +two pieces of information: a repo URL and a branch name; this +is designed to be easily cut&pasted at the end of a 'git fetch' +command line: ------------ Linus, please pull from @@ -206,14 +218,14 @@ becomes: $ git pull git://git..../proj.git master ------------ -In such a case, you do not want to automatically follow other's -tags. +In such a case, you do not want to automatically follow the other +person's tags. -One important aspect of git is it is distributed, and being -distributed largely means there is no inherent "upstream" or +One important aspect of git is its distributed nature, which +largely means there is no inherent "upstream" or "downstream" in the system. On the face of it, the above example might seem to indicate that the tag namespace is owned -by upper echelon of people and tags only flow downwards, but +by the upper echelon of people and that tags only flow downwards, but that is not the case. It only shows that the usage pattern determines who are interested in whose tags. @@ -231,8 +243,8 @@ this case. It may well be that among networking people, they may want to exchange the tags internal to their group, but in that workflow -they are most likely tracking with each other's progress by -having tracking branches. Again, the heuristic to automatically +they are most likely tracking each other's progress by +having remote-tracking branches. Again, the heuristic to automatically follow such tags is a good thing. @@ -241,35 +253,26 @@ On Backdating Tags If you have imported some changes from another VCS and would like to add tags for major releases of your work, it is useful to be able -to specify the date to embed inside of the tag object. The data in +to specify the date to embed inside of the tag object; such data in the tag object affects, for example, the ordering of tags in the gitweb interface. To set the date used in future tag objects, set the environment -variable GIT_COMMITTER_DATE to one or more of the date and time. The -date and time can be specified in a number of ways; the most common -is "YYYY-MM-DD HH:MM". +variable GIT_COMMITTER_DATE (see the later discussion of possible +values; the most common form is "YYYY-MM-DD HH:MM"). -An example follows. +For example: ------------ $ GIT_COMMITTER_DATE="2006-10-02 10:31" git tag -s v1.0.1 ------------ +include::date-formats.txt[] SEE ALSO -------- linkgit:git-check-ref-format[1]. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, -Junio C Hamano <gitster@pobox.com> and Chris Wright <chrisw@osdl.org>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt index 3c786bd283..346e7a2079 100644 --- a/Documentation/git-tar-tree.txt +++ b/Documentation/git-tar-tree.txt @@ -8,6 +8,7 @@ git-tar-tree - Create a tar archive of the files in the named tree object SYNOPSIS -------- +[verse] 'git tar-tree' [--remote=<repo>] <tree-ish> [ <base> ] DESCRIPTION @@ -52,38 +53,30 @@ tar.umask:: EXAMPLES -------- -git tar-tree HEAD junk | (cd /var/tmp/ && tar xf -):: +`git tar-tree HEAD junk | (cd /var/tmp/ && tar xf -)`:: Create a tar archive that contains the contents of the latest commit on the current branch, and extracts it in `/var/tmp/junk` directory. -git tar-tree v1.4.0 git-1.4.0 | gzip >git-1.4.0.tar.gz:: +`git tar-tree v1.4.0 git-1.4.0 | gzip >git-1.4.0.tar.gz`:: Create a tarball for v1.4.0 release. -git tar-tree v1.4.0{caret}\{tree\} git-1.4.0 | gzip >git-1.4.0.tar.gz:: +`git tar-tree v1.4.0{caret}\{tree\} git-1.4.0 | gzip >git-1.4.0.tar.gz`:: Create a tarball for v1.4.0 release, but without a global extended pax header. -git tar-tree --remote=example.com:git.git v1.4.0 >git-1.4.0.tar:: +`git tar-tree --remote=example.com:git.git v1.4.0 >git-1.4.0.tar`:: Get a tarball v1.4.0 from example.com. -git tar-tree HEAD:Documentation/ git-docs > git-1.4.0-docs.tar:: +`git tar-tree HEAD:Documentation/ git-docs > git-1.4.0-docs.tar`:: Put everything in the current head's Documentation/ directory into 'git-1.4.0-docs.tar', with the prefix 'git-docs/'. -Author ------- -Written by Rene Scharfe. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-unpack-file.txt b/Documentation/git-unpack-file.txt index 995db9fead..e9f148a00d 100644 --- a/Documentation/git-unpack-file.txt +++ b/Documentation/git-unpack-file.txt @@ -9,6 +9,7 @@ git-unpack-file - Creates a temporary file with a blob's contents SYNOPSIS -------- +[verse] 'git unpack-file' <blob> DESCRIPTION @@ -22,14 +23,6 @@ OPTIONS <blob>:: Must be a blob id -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-unpack-objects.txt b/Documentation/git-unpack-objects.txt index 36d1038056..ff23494e70 100644 --- a/Documentation/git-unpack-objects.txt +++ b/Documentation/git-unpack-objects.txt @@ -8,6 +8,7 @@ git-unpack-objects - Unpack objects from a packed archive SYNOPSIS -------- +[verse] 'git unpack-objects' [-n] [-q] [-r] [--strict] <pack-file @@ -43,15 +44,6 @@ OPTIONS --strict:: Don't write objects with broken content or links. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 74d1d49dbf..a3081f4e23 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git update-index' [--add] [--remove | --force-remove] [--replace] [--refresh] [-q] [--unmerged] [--ignore-missing] - [--cacheinfo <mode> <object> <file>]* + [(--cacheinfo <mode> <object> <file>)...] [--chmod=(+|-)x] [--assume-unchanged | --no-assume-unchanged] [--skip-worktree | --no-skip-worktree] @@ -21,7 +21,7 @@ SYNOPSIS [--info-only] [--index-info] [-z] [--stdin] [--verbose] - [--] [<file>]* + [--] [<file>...] DESCRIPTION ----------- @@ -144,8 +144,8 @@ you will need to handle the situation manually. Report what is being added and removed from index. -z:: - Only meaningful with `--stdin`; paths are separated with - NUL character instead of LF. + Only meaningful with `--stdin` or `--index-info`; paths are + separated with NUL character instead of LF. \--:: Do not interpret any more arguments as options. @@ -264,7 +264,9 @@ tree files, you have to explicitly tell git about it by dropping "assume unchanged" bit, either before or after you modify them. In order to set "assume unchanged" bit, use `--assume-unchanged` -option. To unset, use `--no-assume-unchanged`. +option. To unset, use `--no-assume-unchanged`. To see which files +have the "assume unchanged" bit set, use `git ls-files -v` +(see linkgit:git-ls-files[1]). The command looks at `core.ignorestat` configuration variable. When this is true, paths updated with `git update-index paths...` and @@ -363,16 +365,8 @@ ctime for marking files processed) (see linkgit:git-config[1]). SEE ALSO -------- linkgit:git-config[1], -linkgit:git-add[1] - - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. +linkgit:git-add[1], +linkgit:git-ls-files[1] GIT --- diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index 9639f705af..d377a35243 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -7,6 +7,7 @@ git-update-ref - Update the object name stored in a ref safely SYNOPSIS -------- +[verse] 'git update-ref' [-m <reason>] (-d <ref> [<oldvalue>] | [--no-deref] <ref> <newvalue> [<oldvalue>]) DESCRIPTION @@ -60,8 +61,9 @@ still contains <oldvalue>. Logging Updates --------------- -If config parameter "core.logAllRefUpdates" is true or the file -"$GIT_DIR/logs/<ref>" exists then `git update-ref` will append +If config parameter "core.logAllRefUpdates" is true and the ref is one under +"refs/heads/", "refs/remotes/", "refs/notes/", or the symbolic ref HEAD; or +the file "$GIT_DIR/logs/<ref>" exists then `git update-ref` will append a line to the log file "$GIT_DIR/logs/<ref>" (dereferencing all symbolic refs before creating the log name) describing the change in ref value. Log lines are formatted as: @@ -84,10 +86,6 @@ An update will fail (without changing <ref>) if the current user is unable to create a new log file, append to the existing log file or does not have committer information available. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-server-info.txt b/Documentation/git-update-server-info.txt index 035cc3018f..bd0e36492f 100644 --- a/Documentation/git-update-server-info.txt +++ b/Documentation/git-update-server-info.txt @@ -8,6 +8,7 @@ git-update-server-info - Update auxiliary info file to help dumb servers SYNOPSIS -------- +[verse] 'git update-server-info' [--force] DESCRIPTION @@ -38,15 +39,6 @@ what they are for: * info/refs - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-upload-archive.txt b/Documentation/git-upload-archive.txt index f5f2b3908b..4d52d3833a 100644 --- a/Documentation/git-upload-archive.txt +++ b/Documentation/git-upload-archive.txt @@ -8,6 +8,7 @@ git-upload-archive - Send archive back to git-archive SYNOPSIS -------- +[verse] 'git upload-archive' <directory> DESCRIPTION @@ -24,14 +25,6 @@ OPTIONS <directory>:: The repository to get a tar archive from. -Author ------- -Written by Franck Bui-Huu. - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt index 71ca4ef442..71f16083d6 100644 --- a/Documentation/git-upload-pack.txt +++ b/Documentation/git-upload-pack.txt @@ -8,6 +8,7 @@ git-upload-pack - Send objects packed back to git-fetch-pack SYNOPSIS -------- +[verse] 'git-upload-pack' [--strict] [--timeout=<n>] <directory> DESCRIPTION @@ -33,13 +34,9 @@ OPTIONS <directory>:: The repository to sync from. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. +SEE ALSO +-------- +linkgit:gitnamespaces[7] GIT --- diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt index 458f3e2755..5317cc2474 100644 --- a/Documentation/git-var.txt +++ b/Documentation/git-var.txt @@ -8,6 +8,7 @@ git-var - Show a git logical variable SYNOPSIS -------- +[verse] 'git var' ( -l | <variable> ) DESCRIPTION @@ -65,14 +66,6 @@ linkgit:git-commit-tree[1] linkgit:git-tag[1] linkgit:git-config[1] -Author ------- -Written by Eric Biederman <ebiederm@xmission.com> - -Documentation --------------- -Documentation by Eric Biederman and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt index 916a38aa99..cd230769fd 100644 --- a/Documentation/git-verify-pack.txt +++ b/Documentation/git-verify-pack.txt @@ -8,7 +8,8 @@ git-verify-pack - Validate packed git archive files SYNOPSIS -------- -'git verify-pack' [-v|--verbose] [--] <pack>.idx ... +[verse] +'git verify-pack' [-v|--verbose] [-s|--stat-only] [--] <pack>.idx ... DESCRIPTION @@ -47,14 +48,6 @@ for objects that are not deltified in the pack, and for objects that are deltified. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index dada21242c..5ff76e892a 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -7,6 +7,7 @@ git-verify-tag - Check the GPG signature of tags SYNOPSIS -------- +[verse] 'git verify-tag' <tag>... DESCRIPTION @@ -15,17 +16,13 @@ Validates the gpg signature created by 'git tag'. OPTIONS ------- +-v:: +--verbose:: + Print the contents of the tag object before validating it. + <tag>...:: SHA1 identifiers of git tag objects. -Author ------- -Written by Jan Harkes <jaharkes@cs.cmu.edu> and Eric W. Biederman <ebiederm@xmission.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index e1586c78c3..c2bc87bc61 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -7,6 +7,7 @@ git-web--browse - git helper script to launch a web browser SYNOPSIS -------- +[verse] 'git web{litdd}browse' [OPTIONS] URL/FILE ... DESCRIPTION @@ -20,8 +21,14 @@ The following browsers (or commands) are currently supported: * firefox (this is the default under X Window when not using KDE) * iceweasel +* seamonkey +* iceape +* chromium (also supported as chromium-browser) +* google-chrome (also supported as chrome) * konqueror (this is the default under KDE, see 'Note about konqueror' below) +* opera * w3m (this is the default outside graphical environments) +* elinks * links * lynx * dillo @@ -32,19 +39,19 @@ Custom commands may also be specified. OPTIONS ------- --b BROWSER:: ---browser=BROWSER:: - Use the specified BROWSER. It must be in the list of supported +-b <browser>:: +--browser=<browser>:: + Use the specified browser. It must be in the list of supported browsers. --t BROWSER:: ---tool=BROWSER:: +-t <browser>:: +--tool=<browser>:: Same as above. --c CONF.VAR:: ---config=CONF.VAR:: +-c <conf.var>:: +--config=<conf.var>:: CONF.VAR is looked up in the git config files. If it's set, - then its value specify the browser that should be used. + then its value specifies the browser that should be used. CONFIGURATION VARIABLES ----------------------- @@ -62,7 +69,7 @@ browser.<tool>.path You can explicitly provide a full path to your preferred browser by setting the configuration variable 'browser.<tool>.path'. For example, you can configure the absolute path to firefox by setting -'browser.firefox.path'. Otherwise, 'git web--browse' assumes the tool +'browser.firefox.path'. Otherwise, 'git web{litdd}browse' assumes the tool is available in PATH. browser.<tool>.cmd @@ -110,16 +117,6 @@ $ git config --global web.browser firefox as they are probably more user specific than repository specific. See linkgit:git-config[1] for more information about this. -Author ------- -Written by Christian Couder <chriscool@tuxfamily.org> and the git-list -<git@vger.kernel.org>, based on 'git mergetool' by Theodore Y. Ts'o. - -Documentation -------------- -Documentation by Christian Couder <chriscool@tuxfamily.org> and the -git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index ea753cdafc..76c7f7eec5 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -8,6 +8,7 @@ git-whatchanged - Show logs with difference each commit introduces SYNOPSIS -------- +[verse] 'git whatchanged' <option>... DESCRIPTION @@ -52,28 +53,17 @@ include::pretty-formats.txt[] Examples -------- -git whatchanged -p v2.6.12.. include/scsi drivers/scsi:: +`git whatchanged -p v2.6.12.. include/scsi drivers/scsi`:: Show as patches the commits since version 'v2.6.12' that changed any file in the include/scsi or drivers/scsi subdirectories -git whatchanged --since="2 weeks ago" \-- gitk:: +`git whatchanged --since="2 weeks ago" \-- gitk`:: Show the changes during the last two weeks to the file 'gitk'. The "--" is necessary to avoid confusion with the *branch* named 'gitk' - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt index bfceacacb3..f22041a9dc 100644 --- a/Documentation/git-write-tree.txt +++ b/Documentation/git-write-tree.txt @@ -8,6 +8,7 @@ git-write-tree - Create a tree object from the current index SYNOPSIS -------- +[verse] 'git write-tree' [--missing-ok] [--prefix=<prefix>/] DESCRIPTION @@ -36,15 +37,6 @@ OPTIONS `<prefix>`. This can be used to write the tree object for a subproject that is in the named subdirectory. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index 646e761789..e869032fc0 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -9,11 +9,11 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path] - [-p|--paginate|--no-pager] [--no-replace-objects] - [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] - [-c name=value] - [--help] COMMAND [ARGS] +'git' [--version] [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] + [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] + [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] + [-c <name>=<value>] + [--help] <command> [<args>] DESCRIPTION ----------- @@ -28,7 +28,7 @@ also want to read linkgit:gitcvs-migration[7]. See the link:user-manual.html[Git User's Manual] for a more in-depth introduction. -The COMMAND is either a name of a Git command (see below) or an alias +The '<command>' is either a name of a Git command (see below) or an alias as defined in the configuration file (see linkgit:git-config[1]). Formatted and hyperlinked version of the latest git @@ -44,29 +44,79 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.3/git.html[documentation for release 1.7.3] +* link:v1.7.8/git.html[documentation for release 1.7.8] * release notes for + link:RelNotes/1.7.8.txt[1.7.8]. + +* link:v1.7.7.1/git.html[documentation for release 1.7.7.1] + +* release notes for + link:RelNotes/1.7.7.1.txt[1.7.7.1], + link:RelNotes/1.7.7.txt[1.7.7]. + +* link:v1.7.6.4/git.html[documentation for release 1.7.6.4] + +* release notes for + link:RelNotes/1.7.6.4.txt[1.7.6.4], + link:RelNotes/1.7.6.3.txt[1.7.6.3], + link:RelNotes/1.7.6.2.txt[1.7.6.2], + link:RelNotes/1.7.6.1.txt[1.7.6.1], + link:RelNotes/1.7.6.txt[1.7.6]. + +* link:v1.7.5.4/git.html[documentation for release 1.7.5.4] + +* release notes for + link:RelNotes/1.7.5.4.txt[1.7.5.4], + link:RelNotes/1.7.5.3.txt[1.7.5.3], + link:RelNotes/1.7.5.2.txt[1.7.5.2], + link:RelNotes/1.7.5.1.txt[1.7.5.1], + link:RelNotes/1.7.5.txt[1.7.5]. + +* link:v1.7.4.5/git.html[documentation for release 1.7.4.5] + +* release notes for + link:RelNotes/1.7.4.5.txt[1.7.4.5], + link:RelNotes/1.7.4.4.txt[1.7.4.4], + link:RelNotes/1.7.4.3.txt[1.7.4.3], + link:RelNotes/1.7.4.2.txt[1.7.4.2], + link:RelNotes/1.7.4.1.txt[1.7.4.1], + link:RelNotes/1.7.4.txt[1.7.4]. + +* link:v1.7.3.5/git.html[documentation for release 1.7.3.5] + +* release notes for + link:RelNotes/1.7.3.5.txt[1.7.3.5], + link:RelNotes/1.7.3.4.txt[1.7.3.4], + link:RelNotes/1.7.3.3.txt[1.7.3.3], + link:RelNotes/1.7.3.2.txt[1.7.3.2], + link:RelNotes/1.7.3.1.txt[1.7.3.1], link:RelNotes/1.7.3.txt[1.7.3]. -* link:v1.7.2.3/git.html[documentation for release 1.7.2.3] +* link:v1.7.2.5/git.html[documentation for release 1.7.2.5] * release notes for + link:RelNotes/1.7.2.5.txt[1.7.2.5], + link:RelNotes/1.7.2.4.txt[1.7.2.4], link:RelNotes/1.7.2.3.txt[1.7.2.3], link:RelNotes/1.7.2.2.txt[1.7.2.2], link:RelNotes/1.7.2.1.txt[1.7.2.1], link:RelNotes/1.7.2.txt[1.7.2]. -* link:v1.7.1.2/git.html[documentation for release 1.7.1.2] +* link:v1.7.1.4/git.html[documentation for release 1.7.1.4] * release notes for + link:RelNotes/1.7.1.4.txt[1.7.1.4], + link:RelNotes/1.7.1.3.txt[1.7.1.3], link:RelNotes/1.7.1.2.txt[1.7.1.2], link:RelNotes/1.7.1.1.txt[1.7.1.1], link:RelNotes/1.7.1.txt[1.7.1]. -* link:v1.7.0.7/git.html[documentation for release 1.7.0.7] +* link:v1.7.0.9/git.html[documentation for release 1.7.0.9] * release notes for + link:RelNotes/1.7.0.9.txt[1.7.0.9], + link:RelNotes/1.7.0.8.txt[1.7.0.8], link:RelNotes/1.7.0.7.txt[1.7.0.7], link:RelNotes/1.7.0.6.txt[1.7.0.6], link:RelNotes/1.7.0.5.txt[1.7.0.5], @@ -76,16 +126,18 @@ Documentation for older releases are available here: link:RelNotes/1.7.0.1.txt[1.7.0.1], link:RelNotes/1.7.0.txt[1.7.0]. -* link:v1.6.6.2/git.html[documentation for release 1.6.6.2] +* link:v1.6.6.3/git.html[documentation for release 1.6.6.3] * release notes for + link:RelNotes/1.6.6.3.txt[1.6.6.3], link:RelNotes/1.6.6.2.txt[1.6.6.2], link:RelNotes/1.6.6.1.txt[1.6.6.1], link:RelNotes/1.6.6.txt[1.6.6]. -* link:v1.6.5.8/git.html[documentation for release 1.6.5.8] +* link:v1.6.5.9/git.html[documentation for release 1.6.5.9] * release notes for + link:RelNotes/1.6.5.9.txt[1.6.5.9], link:RelNotes/1.6.5.8.txt[1.6.5.8], link:RelNotes/1.6.5.7.txt[1.6.5.7], link:RelNotes/1.6.5.6.txt[1.6.5.6], @@ -96,9 +148,10 @@ Documentation for older releases are available here: link:RelNotes/1.6.5.1.txt[1.6.5.1], link:RelNotes/1.6.5.txt[1.6.5]. -* link:v1.6.4.4/git.html[documentation for release 1.6.4.4] +* link:v1.6.4.5/git.html[documentation for release 1.6.4.5] * release notes for + link:RelNotes/1.6.4.5.txt[1.6.4.5], link:RelNotes/1.6.4.4.txt[1.6.4.4], link:RelNotes/1.6.4.3.txt[1.6.4.3], link:RelNotes/1.6.4.2.txt[1.6.4.2], @@ -251,15 +304,23 @@ help ...`. The <name> is expected in the same format as listed by 'git config' (subkeys separated by dots). ---exec-path:: +--exec-path[=<path>]:: Path to wherever your core git programs are installed. This can also be controlled by setting the GIT_EXEC_PATH environment variable. If no path is given, 'git' will print the current setting and then exit. --html-path:: - Print the path to wherever your git HTML documentation is installed - and exit. + Print the path, without trailing slash, where git's HTML + documentation is installed and exit. + +--man-path:: + Print the manpath (see `man(1)`) for the man pages for + this version of git and exit. + +--info-path:: + Print the path where the Info files documenting this + version of git are installed and exit. -p:: --paginate:: @@ -277,17 +338,17 @@ help ...`. path or relative path to current working directory. --work-tree=<path>:: - Set the path to the working tree. The value will not be - used in combination with repositories found automatically in - a .git directory (i.e. $GIT_DIR is not set). + Set the path to the working tree. It can be an absolute path + or a path relative to the current working directory. This can also be controlled by setting the GIT_WORK_TREE environment variable and the core.worktree configuration - variable. It can be an absolute path or relative path to - the directory specified by --git-dir or GIT_DIR. - Note: If --git-dir or GIT_DIR are specified but none of - --work-tree, GIT_WORK_TREE and core.worktree is specified, - the current working directory is regarded as the top directory - of your working tree. + variable (see core.worktree in linkgit:git-config[1] for a + more detailed discussion). + +--namespace=<path>:: + Set the git namespace. See linkgit:gitnamespaces[7] for more + details. Equivalent to setting the `GIT_NAMESPACE` environment + variable. --bare:: Treat the repository as a bare repository. If GIT_DIR @@ -482,19 +543,18 @@ Any git command accepting any <object> can also use the following symbolic notation: HEAD:: - indicates the head of the current branch (i.e. the - contents of `$GIT_DIR/HEAD`). + indicates the head of the current branch. <tag>:: a valid tag 'name' - (i.e. the contents of `$GIT_DIR/refs/tags/<tag>`). + (i.e. a `refs/tags/<tag>` reference). <head>:: a valid head 'name' - (i.e. the contents of `$GIT_DIR/refs/heads/<head>`). + (i.e. a `refs/heads/<head>` reference). For a more complete list of ways to spell object names, see -"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[7]. File/Directory Structure @@ -553,6 +613,10 @@ git so take care if using Cogito etc. This can also be controlled by the '--work-tree' command line option and the core.worktree configuration variable. +'GIT_NAMESPACE':: + Set the git namespace; see linkgit:gitnamespaces[7] for details. + The '--namespace' command-line option also sets this value. + 'GIT_CEILING_DIRECTORIES':: This should be a colon-separated list of absolute paths. If set, it is a list of directories that git should not chdir @@ -604,7 +668,6 @@ where: contents of <old|new>, <old|new>-hex:: are the 40-hexdigit SHA1 hashes, <old|new>-mode:: are the octal representation of the file modes. - + The file parameters can point at the user's working file (e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` @@ -730,16 +793,12 @@ unmerged version of a file when a merge is in progress. Authors ------- -* git's founding father is Linus Torvalds <torvalds@osdl.org>. -* The current git nurse is Junio C Hamano <gitster@pobox.com>. -* The git potty was written by Andreas Ericsson <ae@op5.se>. -* General upbringing is handled by the git-list <git@vger.kernel.org>. - -Documentation --------------- -The documentation for git suite was started by David Greaves -<david@dgreaves.com>, and later enhanced greatly by the -contributors on the git-list <git@vger.kernel.org>. +Git was started by Linus Torvalds, and is currently maintained by Junio +C Hamano. Numerous contributions have come from the git mailing list +<git@vger.kernel.org>. For a more complete list of contributors, see +http://git-scm.com/about. If you have a clone of git.git itself, the +output of linkgit:git-shortlog[1] and linkgit:git-blame[1] can show you +the authors for specific parts of the project. Reporting Bugs -------------- diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index e5a27d875e..25e46aeb7a 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -62,17 +62,24 @@ consults `$GIT_DIR/info/attributes` file (which has the highest precedence), `.gitattributes` file in the same directory as the path in question, and its parent directories up to the toplevel of the work tree (the further the directory that contains `.gitattributes` -is from the path in question, the lower its precedence). +is from the path in question, the lower its precedence). Finally +global and system-wide files are considered (they have the lowest +precedence). If you wish to affect only a single repository (i.e., to assign -attributes to files that are particular to one user's workflow), then +attributes to files that are particular to +one user's workflow for that repository), then attributes should be placed in the `$GIT_DIR/info/attributes` file. Attributes which should be version-controlled and distributed to other repositories (i.e., attributes of interest to all users) should go into -`.gitattributes` files. +`.gitattributes` files. Attributes that should affect all repositories +for a single user should be placed in a file specified by the +`core.attributesfile` configuration option (see linkgit:git-config[1]). +Attributes for all users on a system should be placed in the +`$(prefix)/etc/gitattributes` file. Sometimes you would need to override an setting of an attribute -for a path to `unspecified` state. This can be done by listing +for a path to `Unspecified` state. This can be done by listing the name of the attribute prefixed with an exclamation point `!`. @@ -328,6 +335,16 @@ input that is already correctly indented. In this case, the lack of a smudge filter means that the clean filter _must_ accept its own output without modifying it. +Sequence "%f" on the filter command line is replaced with the name of +the file the filter is working on. A filter might use this in keyword +substitution. For example: + +------------------------ +[filter "p4"] + clean = git-p4-filter --clean %f + smudge = git-p4-filter --smudge %f +------------------------ + Interaction between checkin/checkout attributes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -477,6 +494,8 @@ patterns are available: - `csharp` suitable for source code in the C# language. +- `fortran` suitable for source code in the Fortran language. + - `html` suitable for HTML/XHTML documents. - `java` suitable for source code in the Java language. @@ -485,6 +504,8 @@ patterns are available: - `pascal` suitable for source code in the Pascal/Delphi language. +- `perl` suitable for source code in the Perl language. + - `php` suitable for source code in the PHP language. - `python` suitable for source code in the Python language. @@ -572,13 +593,77 @@ and now produces better output), you can remove the cache manually with `git update-ref -d refs/notes/textconv/jpg` (where "jpg" is the name of the diff driver, as in the example above). +Choosing textconv versus external diff +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If you want to show differences between binary or specially-formatted +blobs in your repository, you can choose to use either an external diff +command, or to use textconv to convert them to a diff-able text format. +Which method you choose depends on your exact situation. + +The advantage of using an external diff command is flexibility. You are +not bound to find line-oriented changes, nor is it necessary for the +output to resemble unified diff. You are free to locate and report +changes in the most appropriate way for your data format. + +A textconv, by comparison, is much more limiting. You provide a +transformation of the data into a line-oriented text format, and git +uses its regular diff tools to generate the output. There are several +advantages to choosing this method: + +1. Ease of use. It is often much simpler to write a binary to text + transformation than it is to perform your own diff. In many cases, + existing programs can be used as textconv filters (e.g., exif, + odt2txt). + +2. Git diff features. By performing only the transformation step + yourself, you can still utilize many of git's diff features, + including colorization, word-diff, and combined diffs for merges. + +3. Caching. Textconv caching can speed up repeated diffs, such as those + you might trigger by running `git log -p`. + + +Marking files as binary +^^^^^^^^^^^^^^^^^^^^^^^ + +Git usually guesses correctly whether a blob contains text or binary +data by examining the beginning of the contents. However, sometimes you +may want to override its decision, either because a blob contains binary +data later in the file, or because the content, while technically +composed of text characters, is opaque to a human reader. For example, +many postscript files contain only ascii characters, but produce noisy +and meaningless diffs. + +The simplest way to mark a file as binary is to unset the diff +attribute in the `.gitattributes` file: + +------------------------ +*.ps -diff +------------------------ + +This will cause git to generate `Binary files differ` (or a binary +patch, if binary patches are enabled) instead of a regular diff. + +However, one may also want to specify other diff driver attributes. For +example, you might want to use `textconv` to convert postscript files to +an ascii representation for human viewing, but otherwise treat them as +binary files. You cannot specify both `-diff` and `diff=ps` attributes. +The solution is to use the `diff.*.binary` config option: + +------------------------ +[diff "ps"] + textconv = ps2ascii + binary = true +------------------------ + Performing a three-way merge ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ `merge` ^^^^^^^ -The attribute `merge` affects how three versions of a file is +The attribute `merge` affects how three versions of a file are merged when a file-level merge is necessary during `git merge`, and other commands such as `git revert` and `git cherry-pick`. @@ -592,15 +677,15 @@ Unset:: Take the version from the current branch as the tentative merge result, and declare that the merge has - conflicts. This is suitable for binary files that does + conflicts. This is suitable for binary files that do not have a well-defined merge semantics. Unspecified:: By default, this uses the same built-in 3-way merge - driver as is the case the `merge` attribute is set. - However, `merge.default` configuration variable can name - different merge driver to be used for paths to which the + driver as is the case when the `merge` attribute is set. + However, the `merge.default` configuration variable can name + different merge driver to be used with paths for which the `merge` attribute is unspecified. String:: @@ -714,6 +799,8 @@ control per path. Set:: Notice all types of potential whitespace errors known to git. + The tab width is taken from the value of the `core.whitespace` + configuration variable. Unset:: @@ -721,13 +808,13 @@ Unset:: Unspecified:: - Use the value of `core.whitespace` configuration variable to + Use the value of the `core.whitespace` configuration variable to decide what to notice as error. String:: Specify a comma separate list of common whitespace problems to - notice in the same format as `core.whitespace` configuration + notice in the same format as the `core.whitespace` configuration variable. @@ -781,7 +868,7 @@ If this attribute is not set or has an invalid value, the value of the (See linkgit:git-config[1]). -USING ATTRIBUTE MACROS +USING MACRO ATTRIBUTES ---------------------- You do not want any end-of-line conversions applied to, nor textual diffs @@ -792,24 +879,27 @@ produced for, any binary file you track. You would need to specify e.g. ------------ but that may become cumbersome, when you have many attributes. Using -attribute macros, you can specify groups of attributes set or unset at -the same time. The system knows a built-in attribute macro, `binary`: +macro attributes, you can define an attribute that, when set, also +sets or unsets a number of other attributes at the same time. The +system knows a built-in macro attribute, `binary`: ------------ *.jpg binary ------------ -which is equivalent to the above. Note that the attribute macros can only -be "Set" (see the above example that sets "binary" macro as if it were an -ordinary attribute --- setting it in turn unsets "text" and "diff"). +Setting the "binary" attribute also unsets the "text" and "diff" +attributes as above. Note that macro attributes can only be "Set", +though setting one might have the effect of setting or unsetting other +attributes or even returning other attributes to the "Unspecified" +state. -DEFINING ATTRIBUTE MACROS +DEFINING MACRO ATTRIBUTES ------------------------- -Custom attribute macros can be defined only in the `.gitattributes` file -at the toplevel (i.e. not in any subdirectory). The built-in attribute -macro "binary" is equivalent to: +Custom macro attributes can be defined only in the `.gitattributes` +file at the toplevel (i.e. not in any subdirectory). The built-in +macro attribute "binary" is equivalent to: ------------ [attr]binary -diff -text @@ -865,6 +955,9 @@ frotz unspecified ---------------------------------------------------------------- +SEE ALSO +-------- +linkgit:git-check-attr[1]. GIT --- diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 6928724a05..f734f97b8e 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -169,10 +169,6 @@ See also http://marc.info/?l=git&m=116563135620359 and http://marc.info/?l=git&m=119150393620273 for further information. -Documentation -------------- -Documentation by Pierre Habouzit and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 5e9c5ebba3..c27d086f68 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -971,7 +971,7 @@ commits from the master branch. The string inside brackets before the commit log message is a short name you can use to name the commit. In the above example, 'master' and 'mybranch' are branch heads. 'master^' is the first parent of 'master' -branch head. Please see linkgit:gitrevisions[1] if you want to +branch head. Please see linkgit:gitrevisions[7] if you want to see more complex cases. [NOTE] diff --git a/Documentation/gitcvs-migration.txt b/Documentation/gitcvs-migration.txt index d861ec452f..aeb0cdc973 100644 --- a/Documentation/gitcvs-migration.txt +++ b/Documentation/gitcvs-migration.txt @@ -7,7 +7,8 @@ gitcvs-migration - git for CVS users SYNOPSIS -------- -git cvsimport * +[verse] +'git cvsimport' * DESCRIPTION ----------- diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 5d91a7e5b3..370624c171 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -7,6 +7,7 @@ gitdiffcore - Tweaking diff output SYNOPSIS -------- +[verse] 'git diff' * DESCRIPTION @@ -227,9 +228,9 @@ changes that touch a specified string, and is controlled by the commands. When diffcore-pickaxe is in use, it checks if there are -filepairs whose "result" side has the specified string and -whose "origin" side does not. Such a filepair represents "the -string appeared in this changeset". It also checks for the +filepairs whose "result" side and whose "origin" side have +different number of specified string. Such a filepair represents +"the string appeared in this changeset". It also checks for the opposite case that loses the specified string. When `\--pickaxe-all` is not in effect, diffcore-pickaxe leaves diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 7183aa9abb..28edefa202 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -350,10 +350,6 @@ rebase:: The commits are guaranteed to be listed in the order that they were processed by rebase. -There is no default 'post-rewrite' hook, but see the -`post-receive-copy-notes` script in `contrib/hooks` for an example -that copies your git-notes to the rewritten commits. - GIT --- diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 7dc2e8b0bc..2e7328b830 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -14,11 +14,8 @@ DESCRIPTION A `gitignore` file specifies intentionally untracked files that git should ignore. -Note that all the `gitignore` files really concern only files -that are not already tracked by git; -in order to ignore uncommitted changes in already tracked files, -please refer to the 'git update-index --assume-unchanged' -documentation. +Files already tracked by git are not affected; see the NOTES +below for details. Each line in a `gitignore` file specifies a pattern. When deciding whether to ignore a path, git normally checks @@ -62,7 +59,8 @@ files specified by command-line options. Higher-level git tools, such as 'git status' and 'git add', use patterns from the sources specified above. -Patterns have the following format: +PATTERN FORMAT +-------------- - A blank line matches no files, so it can serve as a separator for readability. @@ -98,7 +96,20 @@ Patterns have the following format: For example, "/{asterisk}.c" matches "cat-file.c" but not "mozilla-sha1/sha1.c". -An example: +NOTES +----- + +The purpose of gitignore files is to ensure that certain files +not tracked by git remain untracked. + +To ignore uncommitted changes in a file that is already tracked, +use 'git update-index {litdd}assume-unchanged'. + +To stop tracking a file that is currently tracked, use +'git rm --cached'. + +EXAMPLES +-------- -------------------------------------------------------------- $ git status @@ -140,10 +151,10 @@ Another example: The second .gitignore prevents git from ignoring `arch/foo/kernel/vmlinux.lds.S`. -Documentation -------------- -Documentation by David Greaves, Junio C Hamano, Josh Triplett, -Frank Lichtenheld, and the git-list <git@vger.kernel.org>. +SEE ALSO +-------- +linkgit:git-rm[1], linkgit:git-update-index[1], +linkgit:gitrepository-layout[5] GIT --- diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 05ac1c79f7..a17a354936 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -7,6 +7,7 @@ gitk - The git repository browser SYNOPSIS -------- +[verse] 'gitk' [<option>...] [<revs>] [--] [<path>...] DESCRIPTION @@ -69,7 +70,7 @@ frequently used options. the form "'<from>'..'<to>'" to show all revisions between '<from>' and back to '<to>'. Note, more advanced revision selection can be applied. For a more complete list of ways to spell object names, see - linkgit:gitrevisions[1]. + linkgit:gitrevisions[7]. <path>...:: @@ -113,15 +114,6 @@ SEE ALSO A minimal repository browser and git tool output highlighter written in C using Ncurses. -Author ------- -Written by Paul Mackerras <paulus@samba.org>. - -Documentation --------------- -Documentation by Junio C Hamano, Jonas Fonseca, and the git-list -<git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index bcffd95ada..4040941e55 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -44,6 +44,14 @@ submodule.<name>.update:: This config option is overridden if 'git submodule update' is given the '--merge' or '--rebase' options. +submodule.<name>.fetchRecurseSubmodules:: + This option can be used to control recursive fetching of this + submodule. If this option is also present in the submodules entry in + .git/config of the superproject, the setting there will override the + one found in .gitmodules. + Both settings can be overridden on the command line by using the + "--[no-]recurse-submodules" option to "git fetch" and "git pull". + submodule.<name>.ignore:: Defines under what circumstances "git status" and the diff family show a submodule as modified. When set to "all", it will never be considered @@ -82,10 +90,6 @@ SEE ALSO -------- linkgit:git-submodule[1] linkgit:git-config[1] -DOCUMENTATION -------------- -Documentation by Lars Hjemli <hjemli@gmail.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitnamespaces.txt b/Documentation/gitnamespaces.txt new file mode 100644 index 0000000000..c6713cf5d7 --- /dev/null +++ b/Documentation/gitnamespaces.txt @@ -0,0 +1,82 @@ +gitnamespaces(7) +================ + +NAME +---- +gitnamespaces - Git namespaces + +SYNOPSIS +-------- +[verse] +GIT_NAMESPACE=<namespace> 'git upload-pack' +GIT_NAMESPACE=<namespace> 'git receive-pack' + + +DESCRIPTION +----------- + +Git supports dividing the refs of a single repository into multiple +namespaces, each of which has its own branches, tags, and HEAD. Git can +expose each namespace as an independent repository to pull from and push +to, while sharing the object store, and exposing all the refs to +operations such as linkgit:git-gc[1]. + +Storing multiple repositories as namespaces of a single repository +avoids storing duplicate copies of the same objects, such as when +storing multiple branches of the same source. The alternates mechanism +provides similar support for avoiding duplicates, but alternates do not +prevent duplication between new objects added to the repositories +without ongoing maintenance, while namespaces do. + +To specify a namespace, set the `GIT_NAMESPACE` environment variable to +the namespace. For each ref namespace, git stores the corresponding +refs in a directory under `refs/namespaces/`. For example, +`GIT_NAMESPACE=foo` will store refs under `refs/namespaces/foo/`. You +can also specify namespaces via the `--namespace` option to +linkgit:git[1]. + +Note that namespaces which include a `/` will expand to a hierarchy of +namespaces; for example, `GIT_NAMESPACE=foo/bar` will store refs under +`refs/namespaces/foo/refs/namespaces/bar/`. This makes paths in +`GIT_NAMESPACE` behave hierarchically, so that cloning with +`GIT_NAMESPACE=foo/bar` produces the same result as cloning with +`GIT_NAMESPACE=foo` and cloning from that repo with `GIT_NAMESPACE=bar`. It +also avoids ambiguity with strange namespace paths such as `foo/refs/heads/`, +which could otherwise generate directory/file conflicts within the `refs` +directory. + +linkgit:git-upload-pack[1] and linkgit:git-receive-pack[1] rewrite the +names of refs as specified by `GIT_NAMESPACE`. git-upload-pack and +git-receive-pack will ignore all references outside the specified +namespace. + +The smart HTTP server, linkgit:git-http-backend[1], will pass +GIT_NAMESPACE through to the backend programs; see +linkgit:git-http-backend[1] for sample configuration to expose +repository namespaces as repositories. + +For a simple local test, you can use linkgit:git-remote-ext[1]: + +---------- +git clone ext::'git --namespace=foo %s /tmp/prefixed.git' +---------- + +SECURITY +-------- + +Anyone with access to any namespace within a repository can potentially +access objects from any other namespace stored in the same repository. +You can't directly say "give me object ABCD" if you don't have a ref to +it, but you can do some other sneaky things like: + +. Claiming to push ABCD, at which point the server will optimize out the + need for you to actually send it. Now you have a ref to ABCD and can + fetch it (claiming not to have it, of course). + +. Requesting other refs, claiming that you have ABCD, at which point the + server may generate deltas against ABCD. + +None of this causes a problem if you only host public repositories, or +if everyone who may read one namespace may also read everything in every +other namespace (for instance, if everyone in an organization has read +permission to every repository). diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index eb3d040783..5c891f1169 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -23,32 +23,25 @@ objects:: Object store associated with this repository. Usually an object store is self sufficient (i.e. all the objects that are referred to by an object found in it are also - found in it), but there are couple of ways to violate - it. + found in it), but there are a few ways to violate it. + -. You could populate the repository by running a commit walker -without `-a` option. Depending on which options are given, you -could have only commit objects without associated blobs and -trees this way, for example. A repository with this kind of -incomplete object store is not suitable to be published to the -outside world but sometimes useful for private repository. -. You also could have an incomplete but locally usable repository -by cloning shallowly. See linkgit:git-clone[1]. -. You can be using `objects/info/alternates` mechanism, or -`$GIT_ALTERNATE_OBJECT_DIRECTORIES` mechanism to 'borrow' +. You could have an incomplete but locally usable repository +by creating a shallow clone. See linkgit:git-clone[1]. +. You could be using the `objects/info/alternates` or +`$GIT_ALTERNATE_OBJECT_DIRECTORIES` mechanisms to 'borrow' objects from other object stores. A repository with this kind of incomplete object store is not suitable to be published for use with dumb transports but otherwise is OK as long as -`objects/info/alternates` points at the right object stores -it borrows from. +`objects/info/alternates` points at the object stores it +borrows from. objects/[0-9a-f][0-9a-f]:: - Traditionally, each object is stored in its own file. - They are split into 256 subdirectories using the first - two letters from its object name to keep the number of - directory entries `objects` directory itself needs to - hold. Objects found here are often called 'unpacked' - (or 'loose') objects. + A newly created object is stored in its own file. + The objects are splayed over 256 subdirectories using + the first two characters of the sha1 object name to + keep the number of directory entries in `objects` + itself to a manageable number. Objects found + here are often called 'unpacked' (or 'loose') objects. objects/pack:: Packs (files that store many object in compressed form, @@ -85,7 +78,7 @@ objects/info/http-alternates:: refs:: References are stored in subdirectories of this - directory. The 'git prune' command knows to keep + directory. The 'git prune' command knows to preserve objects reachable from refs found in this directory and its subdirectories. @@ -119,16 +112,17 @@ HEAD:: + HEAD can also record a specific commit directly, instead of being a symref to point at the current branch. Such a state -is often called 'detached HEAD', and almost all commands work -identically as normal. See linkgit:git-checkout[1] for -details. +is often called 'detached HEAD.' See linkgit:git-checkout[1] +for details. branches:: A slightly deprecated way to store shorthands to be used - to specify URL to 'git fetch', 'git pull' and 'git push' - commands is to store a file in `branches/<name>` and - give 'name' to these commands in place of 'repository' - argument. + to specify a URL to 'git fetch', 'git pull' and 'git push'. + A file can be stored as `branches/<name>` and then + 'name' can be given to these commands in place of + 'repository' argument. See the REMOTES section in + linkgit:git-fetch[1] for details. This mechanism is legacy + and not likely to be found in modern repositories. hooks:: Hooks are customization scripts used by various git @@ -173,9 +167,11 @@ info/exclude:: at it. See also: linkgit:gitignore[5]. remotes:: - Stores shorthands to be used to give URL and default - refnames to interact with remote repository to - 'git fetch', 'git pull' and 'git push' commands. + Stores shorthands for URL and default refnames for use + when interacting with remote repositories via 'git fetch', + 'git pull' and 'git push' commands. See the REMOTES section + in linkgit:git-fetch[1] for details. This mechanism is legacy + and not likely to be found in modern repositories. logs:: Records of changes made to refs are stored in this diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index ecab0c09d0..f1e4422acc 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -7,6 +7,7 @@ gittutorial-2 - A tutorial introduction to git: part two SYNOPSIS -------- +[verse] git * DESCRIPTION @@ -373,7 +374,7 @@ $ git status # # new file: closing.txt # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # # modified: file.txt diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index 1c1606696e..dee050567e 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -7,6 +7,7 @@ gittutorial - A tutorial introduction to git (for version 1.5.1 or newer) SYNOPSIS -------- +[verse] git * DESCRIPTION @@ -385,7 +386,7 @@ alice$ git fetch bob Unlike the longhand form, when Alice fetches from Bob using a remote repository shorthand set up with 'git remote', what was -fetched is stored in a remote tracking branch, in this case +fetched is stored in a remote-tracking branch, in this case `bob/master`. So after this: ------------------------------------- @@ -402,8 +403,8 @@ could merge the changes into her master branch: alice$ git merge bob/master ------------------------------------- -This `merge` can also be done by 'pulling from her own remote -tracking branch', like this: +This `merge` can also be done by 'pulling from her own remote-tracking +branch', like this: ------------------------------------- alice$ git pull . remotes/bob/master diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt new file mode 100644 index 0000000000..7aba497b74 --- /dev/null +++ b/Documentation/gitweb.conf.txt @@ -0,0 +1,889 @@ +gitweb.conf(5) +============== + +NAME +---- +gitweb.conf - Gitweb (git web interface) configuration file + +SYNOPSIS +-------- +/etc/gitweb.conf, /etc/gitweb-common.conf, $GITWEBDIR/gitweb_config.perl + +DESCRIPTION +----------- + +The gitweb CGI script for viewing Git repositories over the web uses a +perl script fragment as its configuration file. You can set variables +using "`our $variable = value`"; text from a "#" character until the +end of a line is ignored. See *perlsyn*(1) for details. + +An example: + + # gitweb configuration file for http://git.example.org + # + our $projectroot = "/srv/git"; # FHS recommendation + our $site_name = 'Example.org >> Repos'; + + +The configuration file is used to override the default settings that +were built into gitweb at the time the 'gitweb.cgi' script was generated. + +While one could just alter the configuration settings in the gitweb +CGI itself, those changes would be lost upon upgrade. Configuration +settings might also be placed into a file in the same directory as the +CGI script with the default name 'gitweb_config.perl' -- allowing +one to have multiple gitweb instances with different configurations by +the use of symlinks. + +Note that some configuration can be controlled on per-repository rather than +gitweb-wide basis: see "Per-repository gitweb configuration" subsection on +linkgit:gitweb[1] manpage. + + +DISCUSSION +---------- +Gitweb reads configuration data from the following sources in the +following order: + + * built-in values (some set during build stage), + + * common system-wide configuration file (defaults to + '/etc/gitweb-common.conf'), + + * either per-instance configuration file (defaults to 'gitweb_config.perl' + in the same directory as the installed gitweb), or if it does not exists + then fallback system-wide configuration file (defaults to '/etc/gitweb.conf'). + +Values obtained in later configuration files override values obtained earlier +in the above sequence. + +Locations of the common system-wide configuration file, the fallback +system-wide configuration file and the per-instance configuration file +are defined at compile time using build-time Makefile configuration +variables, respectively `GITWEB_CONFIG_COMMON`, `GITWEB_CONFIG_SYSTEM` +and `GITWEB_CONFIG`. + +You can also override locations of gitweb configuration files during +runtime by setting the following environment variables: +`GITWEB_CONFIG_COMMON`, `GITWEB_CONFIG_SYSTEM` and `GITWEB_CONFIG` +to a non-empty value. + + +The syntax of the configuration files is that of Perl, since these files are +handled by sourcing them as fragments of Perl code (the language that +gitweb itself is written in). Variables are typically set using the +`our` qualifier (as in "`our $variable = <value>;`") to avoid syntax +errors if a new version of gitweb no longer uses a variable and therefore +stops declaring it. + +You can include other configuration file using read_config_file() +subroutine. For example, one might want to put gitweb configuration +related to access control for viewing repositories via Gitolite (one +of git repository management tools) in a separate file, e.g. in +'/etc/gitweb-gitolite.conf'. To include it, put + +-------------------------------------------------- +read_config_file("/etc/gitweb-gitolite.conf"); +-------------------------------------------------- + +somewhere in gitweb configuration file used, e.g. in per-installation +gitweb configuration file. Note that read_config_file() checks itself +that the file it reads exists, and does nothing if it is not found. +It also handles errors in included file. + + +The default configuration with no configuration file at all may work +perfectly well for some installations. Still, a configuration file is +useful for customizing or tweaking the behavior of gitweb in many ways, and +some optional features will not be present unless explicitly enabled using +the configurable `%features` variable (see also "Configuring gitweb +features" section below). + + +CONFIGURATION VARIABLES +----------------------- +Some configuration variables have their default values (embedded in the CGI +script) set during building gitweb -- if that is the case, this fact is put +in their description. See gitweb's 'INSTALL' file for instructions on building +and installing gitweb. + + +Location of repositories +~~~~~~~~~~~~~~~~~~~~~~~~ +The configuration variables described below control how gitweb finds +git repositories, and how repositories are displayed and accessed. + +See also "Repositories" and later subsections in linkgit:gitweb[1] manpage. + +$projectroot:: + Absolute filesystem path which will be prepended to project path; + the path to repository is `$projectroot/$project`. Set to + `$GITWEB_PROJECTROOT` during installation. This variable has to be + set correctly for gitweb to find repositories. ++ +For example, if `$projectroot` is set to "/srv/git" by putting the following +in gitweb config file: ++ +---------------------------------------------------------------------------- +our $projectroot = "/srv/git"; +---------------------------------------------------------------------------- ++ +then ++ +------------------------------------------------ +http://git.example.com/gitweb.cgi?p=foo/bar.git +------------------------------------------------ ++ +and its path_info based equivalent ++ +------------------------------------------------ +http://git.example.com/gitweb.cgi/foo/bar.git +------------------------------------------------ ++ +will map to the path '/srv/git/foo/bar.git' on the filesystem. + +$projects_list:: + Name of a plain text file listing projects, or a name of directory + to be scanned for projects. ++ +Project list files should list one project per line, with each line +having the following format ++ +----------------------------------------------------------------------------- +<URI-encoded filesystem path to repository> SP <URI-encoded repository owner> +----------------------------------------------------------------------------- ++ +The default value of this variable is determined by the `GITWEB_LIST` +makefile variable at installation time. If this variable is empty, gitweb +will fall back to scanning the `$projectroot` directory for repositories. + +$project_maxdepth:: + If `$projects_list` variable is unset, gitweb will recursively + scan filesystem for git repositories. The `$project_maxdepth` + is used to limit traversing depth, relative to `$projectroot` + (starting point); it means that directories which are further + from `$projectroot` than `$project_maxdepth` will be skipped. ++ +It is purely performance optimization, originally intended for MacOS X, +where recursive directory traversal is slow. Gitweb follows symbolic +links, but it detects cycles, ignoring any duplicate files and directories. ++ +The default value of this variable is determined by the build-time +configuration variable `GITWEB_PROJECT_MAXDEPTH`, which defaults to +2007. + +$export_ok:: + Show repository only if this file exists (in repository). Only + effective if this variable evaluates to true. Can be set when + building gitweb by setting `GITWEB_EXPORT_OK`. This path is + relative to `GIT_DIR`. git-daemon[1] uses 'git-daemon-export-ok', + unless started with `--export-all`. By default this variable is + not set, which means that this feature is turned off. + +$export_auth_hook:: + Function used to determine which repositories should be shown. + This subroutine should take one parameter, the full path to + a project, and if it returns true, that project will be included + in the projects list and can be accessed through gitweb as long + as it fulfills the other requirements described by $export_ok, + $projects_list, and $projects_maxdepth. Example: ++ +---------------------------------------------------------------------------- +our $export_auth_hook = sub { return -e "$_[0]/git-daemon-export-ok"; }; +---------------------------------------------------------------------------- ++ +though the above might be done by using `$export_ok` instead ++ +---------------------------------------------------------------------------- +our $export_ok = "git-daemon-export-ok"; +---------------------------------------------------------------------------- ++ +If not set (default), it means that this feature is disabled. ++ +See also more involved example in "Controlling access to git repositories" +subsection on linkgit:gitweb[1] manpage. + +$strict_export:: + Only allow viewing of repositories also shown on the overview page. + This for example makes `$gitweb_export_ok` file decide if repository is + available and not only if it is shown. If `$gitweb_list` points to + file with list of project, only those repositories listed would be + available for gitweb. Can be set during building gitweb via + `GITWEB_STRICT_EXPORT`. By default this variable is not set, which + means that you can directly access those repositories that are hidden + from projects list page (e.g. the are not listed in the $projects_list + file). + + +Finding files +~~~~~~~~~~~~~ +The following configuration variables tell gitweb where to find files. +The values of these variables are paths on the filesystem. + +$GIT:: + Core git executable to use. By default set to `$GIT_BINDIR/git`, which + in turn is by default set to `$(bindir)/git`. If you use git installed + from a binary package, you should usually set this to "/usr/bin/git". + This can just be "git" if your web server has a sensible PATH; from + security point of view it is better to use absolute path to git binary. + If you have multiple git versions installed it can be used to choose + which one to use. Must be (correctly) set for gitweb to be able to + work. + +$mimetypes_file:: + File to use for (filename extension based) guessing of MIME types before + trying '/etc/mime.types'. *NOTE* that this path, if relative, is taken + as relative to the current git repository, not to CGI script. If unset, + only '/etc/mime.types' is used (if present on filesystem). If no mimetypes + file is found, mimetype guessing based on extension of file is disabled. + Unset by default. + +$highlight_bin:: + Path to the highlight executable to use (it must be the one from + http://www.andre-simon.de[] due to assumptions about parameters and output). + By default set to 'highlight'; set it to full path to highlight + executable if it is not installed on your web server's PATH. + Note that 'highlight' feature must be set for gitweb to actually + use syntax hightlighting. ++ +*NOTE*: if you want to add support for new file type (supported by +"highlight" but not used by gitweb), you need to modify `%highlight_ext` +or `%highlight_basename`, depending on whether you detect type of file +based on extension (for example "sh") or on its basename (for example +"Makefile"). The keys of these hashes are extension and basename, +respectively, and value for given key is name of syntax to be passed via +`--syntax <syntax>` to highlighter. ++ +For example if repositories you are hosting use "phtml" extension for +PHP files, and you want to have correct syntax-highlighting for those +files, you can add the following to gitweb configuration: ++ +--------------------------------------------------------- +our %highlight_ext; +$highlight_ext{'phtml'} = 'php'; +--------------------------------------------------------- + + +Links and their targets +~~~~~~~~~~~~~~~~~~~~~~~ +The configuration variables described below configure some of gitweb links: +their target and their look (text or image), and where to find page +prerequisites (stylesheet, favicon, images, scripts). Usually they are left +at their default values, with the possible exception of `@stylesheets` +variable. + +@stylesheets:: + List of URIs of stylesheets (relative to the base URI of a page). You + might specify more than one stylesheet, for example to use "gitweb.css" + as base with site specific modifications in a separate stylesheet + to make it easier to upgrade gitweb. For example, you can add + a `site` stylesheet by putting ++ +---------------------------------------------------------------------------- +push @stylesheets, "gitweb-site.css"; +---------------------------------------------------------------------------- ++ +in the gitweb config file. Those values that are relative paths are +relative to base URI of gitweb. ++ +This list should contain the URI of gitweb's standard stylesheet. The default +URI of gitweb stylesheet can be set at build time using the `GITWEB_CSS` +makefile variable. Its default value is 'static/gitweb.css' +(or 'static/gitweb.min.css' if the `CSSMIN` variable is defined, +i.e. if CSS minifier is used during build). ++ +*Note*: there is also a legacy `$stylesheet` configuration variable, which was +used by older gitweb. If `$stylesheet` variable is defined, only CSS stylesheet +given by this variable is used by gitweb. + +$logo:: + Points to the location where you put 'git-logo.png' on your web + server, or to be more the generic URI of logo, 72x27 size). This image + is displayed in the top right corner of each gitweb page and used as + a logo for the Atom feed. Relative to the base URI of gitweb (as a path). + Can be adjusted when building gitweb using `GITWEB_LOGO` variable + By default set to 'static/git-logo.png'. + +$favicon:: + Points to the location where you put 'git-favicon.png' on your web + server, or to be more the generic URI of favicon, which will be served + as "image/png" type. Web browsers that support favicons (website icons) + may display them in the browser's URL bar and next to the site name in + bookmarks. Relative to the base URI of gitweb. Can be adjusted at + build time using `GITWEB_FAVICON` variable. + By default set to 'static/git-favicon.png'. + +$javascript:: + Points to the location where you put 'gitweb.js' on your web server, + or to be more generic the URI of JavaScript code used by gitweb. + Relative to the base URI of gitweb. Can be set at build time using + the `GITWEB_JS` build-time configuration variable. ++ +The default value is either 'static/gitweb.js', or 'static/gitweb.min.js' if +the `JSMIN` build variable was defined, i.e. if JavaScript minifier was used +at build time. *Note* that this single file is generated from multiple +individual JavaScript "modules". + +$home_link:: + Target of the home link on the top of all pages (the first part of view + "breadcrumbs"). By default it is set to the absolute URI of a current page + (to the value of `$my_uri` variable, or to "/" if `$my_uri` is undefined + or is an empty string). + +$home_link_str:: + Label for the "home link" at the top of all pages, leading to `$home_link` + (usually the main gitweb page, which contains the projects list). It is + used as the first component of gitweb's "breadcrumb trail": + `<home link> / <project> / <action>`. Can be set at build time using + the `GITWEB_HOME_LINK_STR` variable. By default it is set to "projects", + as this link leads to the list of projects. Other popular choice it to + set it to the name of site. + +$logo_url:: +$logo_label:: + URI and label (title) for the Git logo link (or your site logo, + if you chose to use different logo image). By default, these both + refer to git homepage, http://git-scm.com[]; in the past, they pointed + to git documentation at http://www.kernel.org[]. + + +Changing gitweb's look +~~~~~~~~~~~~~~~~~~~~~~ +You can adjust how pages generated by gitweb look using the variables described +below. You can change the site name, add common headers and footers for all +pages, and add a description of this gitweb installation on its main page +(which is the projects list page), etc. + +$site_name:: + Name of your site or organization, to appear in page titles. Set it + to something descriptive for clearer bookmarks etc. If this variable + is not set or is, then gitweb uses the value of the `SERVER_NAME` + CGI environment variable, setting site name to "$SERVER_NAME Git", + or "Untitled Git" if this variable is not set (e.g. if running gitweb + as standalone script). ++ +Can be set using the `GITWEB_SITENAME` at build time. Unset by default. + +$site_html_head_string:: + HTML snippet to be included in the <head> section of each page. + Can be set using `GITWEB_SITE_HTML_HEAD_STRING` at build time. + No default value. + +$site_header:: + Name of a file with HTML to be included at the top of each page. + Relative to the directory containing the 'gitweb.cgi' script. + Can be set using `GITWEB_SITE_HEADER` at build time. No default + value. + +$site_footer:: + Name of a file with HTML to be included at the bottom of each page. + Relative to the directory containing the 'gitweb.cgi' script. + Can be set using `GITWEB_SITE_FOOTER` at build time. No default + value. + +$home_text:: + Name of a HTML file which, if it exists, is included on the + gitweb projects overview page ("projects_list" view). Relative to + the directory containing the gitweb.cgi script. Default value + can be adjusted during build time using `GITWEB_HOMETEXT` variable. + By default set to 'indextext.html'. + +$projects_list_description_width:: + The width (in characters) of the "Description" column of the projects list. + Longer descriptions will be truncated (trying to cut at word boundary); + the full description is available in the 'title' attribute (usually shown on + mouseover). The default is 25, which might be too small if you + use long project descriptions. + +$default_projects_order:: + Default value of ordering of projects on projects list page, which + means the ordering used if you don't explicitly sort projects list + (if there is no "o" CGI query parameter in the URL). Valid values + are "none" (unsorted), "project" (projects are by project name, + i.e. path to repository relative to `$projectroot`), "descr" + (project description), "owner", and "age" (by date of most current + commit). ++ +Default value is "project". Unknown value means unsorted. + + +Changing gitweb's behavior +~~~~~~~~~~~~~~~~~~~~~~~~~~ +These configuration variables control _internal_ gitweb behavior. + +$default_blob_plain_mimetype:: + Default mimetype for the blob_plain (raw) view, if mimetype checking + doesn't result in some other type; by default "text/plain". + Gitweb guesses mimetype of a file to display based on extension + of its filename, using `$mimetypes_file` (if set and file exists) + and '/etc/mime.types' files (see *mime.types*(5) manpage; only + filename extension rules are supported by gitweb). + +$default_text_plain_charset:: + Default charset for text files. If this is not set, the web server + configuration will be used. Unset by default. + +$fallback_encoding:: + Gitweb assumes this charset when a line contains non-UTF-8 characters. + The fallback decoding is used without error checking, so it can be even + "utf-8". The value must be a valid encoding; see the *Encoding::Supported*(3pm) + man page for a list. The default is "latin1", aka. "iso-8859-1". + +@diff_opts:: + Rename detection options for git-diff and git-diff-tree. The default is + (\'-M'); set it to (\'-C') or (\'-C', \'-C') to also detect copies, + or set it to () i.e. empty list if you don't want to have renames + detection. ++ +*Note* that rename and especially copy detection can be quite +CPU-intensive. Note also that non git tools can have problems with +patches generated with options mentioned above, especially when they +involve file copies (\'-C') or criss-cross renames (\'-B'). + + +Some optional features and policies +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Most of features are configured via `%feature` hash; however some of extra +gitweb features can be turned on and configured using variables described +below. This list beside configuration variables that control how gitweb +looks does contain variables configuring administrative side of gitweb +(e.g. cross-site scripting prevention; admittedly this as side effect +affects how "summary" pages look like, or load limiting). + +@git_base_url_list:: + List of git base URLs. These URLs are used to generate URLs + describing from where to fetch a project, which are shown on + project summary page. The full fetch URL is "`$git_base_url/$project`", + for each element of this list. You can set up multiple base URLs + (for example one for `git://` protocol, and one for `http://` + protocol). ++ +Note that per repository configuration can be set in '$GIT_DIR/cloneurl' +file, or as values of multi-value `gitweb.url` configuration variable in +project config. Per-repository configuration takes precedence over value +composed from `@git_base_url_list` elements and project name. ++ +You can setup one single value (single entry/item in this list) at build +time by setting the `GITWEB_BASE_URL` built-time configuration variable. +By default it is set to (), i.e. an empty list. This means that gitweb +would not try to create project URL (to fetch) from project name. + +$projects_list_group_categories:: + Whether to enables the grouping of projects by category on the project + list page. The category of a project is determined by the + `$GIT_DIR/category` file or the `gitweb.category` variable in each + repository's configuration. Disabled by default (set to 0). + +$project_list_default_category:: + Default category for projects for which none is specified. If this is + set to the empty string, such projects will remain uncategorized and + listed at the top, above categorized projects. Used only if project + categories are enabled, which means if `$projects_list_group_categories` + is true. By default set to "" (empty string). + +$prevent_xss:: + If true, some gitweb features are disabled to prevent content in + repositories from launching cross-site scripting (XSS) attacks. Set this + to true if you don't trust the content of your repositories. + False by default (set to 0). + +$maxload:: + Used to set the maximum load that we will still respond to gitweb queries. + If the server load exceeds this value then gitweb will return + "503 Service Unavailable" error. The server load is taken to be 0 + if gitweb cannot determine its value. Currently it works only on Linux, + where it uses '/proc/loadavg'; the load there is the number of active + tasks on the system -- processes that are actually running -- averaged + over the last minute. ++ +Set `$maxload` to undefined value (`undef`) to turn this feature off. +The default value is 300. + +$per_request_config:: + If this is set to code reference, it will be run once for each request. + You can set parts of configuration that change per session this way. + For example, one might use the following code in a gitweb configuration + file ++ +-------------------------------------------------------------------------------- +our $per_request_config = sub { + $ENV{GL_USER} = $cgi->remote_user || "gitweb"; +}; +-------------------------------------------------------------------------------- ++ +If `$per_request_config` is not a code reference, it is interpreted as boolean +value. If it is true gitweb will process config files once per request, +and if it is false gitweb will process config files only once, each time it +is executed. True by default (set to 1). ++ +*NOTE*: `$my_url`, `$my_uri`, and `$base_url` are overwritten with their default +values before every request, so if you want to change them, be sure to set +this variable to true or a code reference effecting the desired changes. ++ +This variable matters only when using persistent web environments that +serve multiple requests using single gitweb instance, like mod_perl, +FastCGI or Plackup. + + +Other variables +~~~~~~~~~~~~~~~ +Usually you should not need to change (adjust) any of configuration +variables described below; they should be automatically set by gitweb to +correct value. + + +$version:: + Gitweb version, set automatically when creating gitweb.cgi from + gitweb.perl. You might want to modify it if you are running modified + gitweb, for example ++ +--------------------------------------------------- +our $version .= " with caching"; +--------------------------------------------------- ++ +if you run modified version of gitweb with caching support. This variable +is purely informational, used e.g. in the "generator" meta header in HTML +header. + +$my_url:: +$my_uri:: + Full URL and absolute URL of the gitweb script; + in earlier versions of gitweb you might have need to set those + variables, but now there should be no need to do it. See + `$per_request_config` if you need to set them still. + +$base_url:: + Base URL for relative URLs in pages generated by gitweb, + (e.g. `$logo`, `$favicon`, `@stylesheets` if they are relative URLs), + needed and used '<base href="$base_url">' only for URLs with nonempty + PATH_INFO. Usually gitweb sets its value correctly, + and there is no need to set this variable, e.g. to $my_uri or "/". + See `$per_request_config` if you need to override it anyway. + + +CONFIGURING GITWEB FEATURES +--------------------------- +Many gitweb features can be enabled (or disabled) and configured using the +`%feature` hash. Names of gitweb features are keys of this hash. + +Each `%feature` hash element is a hash reference and has the following +structure: +---------------------------------------------------------------------- +"<feature_name>" => { + "sub" => <feature-sub (subroutine)>, + "override" => <allow-override (boolean)>, + "default" => [ <options>... ] +}, +---------------------------------------------------------------------- +Some features cannot be overridden per project. For those +features the structure of appropriate `%feature` hash element has a simpler +form: +---------------------------------------------------------------------- +"<feature_name>" => { + "override" => 0, + "default" => [ <options>... ] +}, +---------------------------------------------------------------------- +As one can see it lacks the \'sub' element. + +The meaning of each part of feature configuration is described +below: + +default:: + List (array reference) of feature parameters (if there are any), + used also to toggle (enable or disable) given feature. ++ +Note that it is currently *always* an array reference, even if +feature doesn't accept any configuration parameters, and \'default' +is used only to turn it on or off. In such case you turn feature on +by setting this element to `[1]`, and torn it off by setting it to +`[0]`. See also the passage about the "blame" feature in the "Examples" +section. ++ +To disable features that accept parameters (are configurable), you +need to set this element to empty list i.e. `[]`. + +override:: + If this field has a true value then the given feature is + overriddable, which means that it can be configured + (or enabled/disabled) on a per-repository basis. ++ +Usually given "<feature>" is configurable via the `gitweb.<feature>` +config variable in the per-repository git configuration file. ++ +*Note* that no feature is overriddable by default. + +sub:: + Internal detail of implementation. What is important is that + if this field is not present then per-repository override for + given feature is not supported. ++ +You wouldn't need to ever change it in gitweb config file. + + +Features in `%feature` +~~~~~~~~~~~~~~~~~~~~~~ +The gitweb features that are configurable via `%feature` hash are listed +below. This should be a complete list, but ultimately the authoritative +and complete list is in gitweb.cgi source code, with features described +in the comments. + +blame:: + Enable the "blame" and "blame_incremental" blob views, showing for + each line the last commit that modified it; see linkgit:git-blame[1]. + This can be very CPU-intensive and is therefore disabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.blame` configuration variable (boolean). + +snapshot:: + Enable and configure the "snapshot" action, which allows user to + download a compressed archive of any tree or commit, as produced + by linkgit:git-archive[1] and possibly additionally compressed. + This can potentially generate high traffic if you have large project. ++ +The value of \'default' is a list of names of snapshot formats, +defined in `%known_snapshot_formats` hash, that you wish to offer. +Supported formats include "tgz", "tbz2", "txz" (gzip/bzip2/xz +compressed tar archive) and "zip"; please consult gitweb sources for +a definitive list. By default only "tgz" is offered. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.blame` configuration variable, which contains +a comma separated list of formats or "none" to disable snapshots. +Unknown values are ignored. + +grep:: + Enable grep search, which lists the files in currently selected + tree (directory) containing the given string; see linkgit:git-grep[1]. + This can be potentially CPU-intensive, of course. Enabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.grep` configuration variable (boolean). + +pickaxe:: + Enable the so called pickaxe search, which will list the commits + that introduced or removed a given string in a file. This can be + practical and quite faster alternative to "blame" action, but it is + still potentially CPU-intensive. Enabled by default. ++ +The pickaxe search is described in linkgit:git-log[1] (the +description of `-S<string>` option, which refers to pickaxe entry in +linkgit:gitdiffcore[7] for more details). ++ +This feature can be configured on a per-repository basis by setting +repository's `gitweb.pickaxe` configuration variable (boolean). + +show-sizes:: + Enable showing size of blobs (ordinary files) in a "tree" view, in a + separate column, similar to what `ls -l` does; see description of + `-l` option in linkgit:git-ls-tree[1] manpage. This costs a bit of + I/O. Enabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.showsizes` configuration variable (boolean). + +patches:: + Enable and configure "patches" view, which displays list of commits in email + (plain text) output format; see also linkgit:git-format-patch[1]. + The value is the maximum number of patches in a patchset generated + in "patches" view. Set the 'default' field to a list containing single + item of or to an empty list to disable patch view, or to a list + containing a single negative number to remove any limit. + Default value is 16. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.patches` configuration variable (integer). + +avatar:: + Avatar support. When this feature is enabled, views such as + "shortlog" or "commit" will display an avatar associated with + the email of each committer and author. ++ +Currently available providers are *"gravatar"* and *"picon"*. +Only one provider at a time can be selected ('default' is one element list). +If an unknown provider is specified, the feature is disabled. +*Note* that some providers might require extra Perl packages to be +installed; see 'gitweb/INSTALL' for more details. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.avatar` configuration variable. ++ +See also `%avatar_size` with pixel sizes for icons and avatars +("default" is used for one-line like "log" and "shortlog", "double" +is used for two-line like "commit", "commitdiff" or "tag"). If the +default font sizes or lineheights are changed (e.g. via adding extra +CSS stylesheet in `@stylesheets`), it may be appropriate to change +these values. + +highlight:: + Server-side syntax highlight support in "blob" view. It requires + `$highlight_bin` program to be available (see the description of + this variable in the "Configuration variables" section above), + and therefore is disabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.highlight` configuration variable (boolean). + +remote_heads:: + Enable displaying remote heads (remote-tracking branches) in the "heads" + list. In most cases the list of remote-tracking branches is an + unnecessary internal private detail, and this feature is therefore + disabled by default. linkgit:git-instaweb[1], which is usually used + to browse local repositories, enables and uses this feature. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.remote_heads` configuration variable (boolean). + + +The remaining features cannot be overridden on a per project basis. + +search:: + Enable text search, which will list the commits which match author, + committer or commit text to a given string; see the description of + `--author`, `--committer` and `--grep` options in linkgit:git-log[1] + manpage. Enabled by default. ++ +Project specific override is not supported. + +forks:: + If this feature is enabled, gitweb considers projects in + subdirectories of project root (basename) to be forks of existing + projects. For each project `$projname.git`, projects in the + `$projname/` directory and its subdirectories will not be + shown in the main projects list. Instead, a \'+' mark is shown + next to `$projname`, which links to a "forks" view that lists all + the forks (all projects in `$projname/` subdirectory). Additionally + a "forks" view for a project is linked from project summary page. ++ +If the project list is taken from a file (`$projects_list` points to a +file), forks are only recognized if they are listed after the main project +in that file. ++ +Project specific override is not supported. + +actions:: + Insert custom links to the action bar of all project pages. This + allows you to link to third-party scripts integrating into gitweb. ++ +The "default" value consists of a list of triplets in the form +`("<label>", "<link>", "<position>")` where "position" is the label +after which to insert the link, "link" is a format string where `%n` +expands to the project name, `%f` to the project path within the +filesystem (i.e. "$projectroot/$project"), `%h` to the current hash +(\'h' gitweb parameter) and `%b` to the current hash base +(\'hb' gitweb parameter); `%%` expands to \'%'. ++ +For example, at the time this page was written, the http://repo.or.cz[] +git hosting site set it to the following to enable graphical log +(using the third party tool *git-browser*): ++ +---------------------------------------------------------------------- +$feature{'actions'}{'default'} = + [ ('graphiclog', '/git-browser/by-commit.html?r=%n', 'summary')]; +---------------------------------------------------------------------- ++ +This adds a link titled "graphiclog" after the "summary" link, leading to +`git-browser` script, passing `r=<project>` as a query parameter. ++ +Project specific override is not supported. + +timed:: + Enable displaying how much time and how many git commands it took to + generate and display each page in the page footer (at the bottom of + page). For example the footer might contain: "This page took 6.53325 + seconds and 13 git commands to generate." Disabled by default. ++ +Project specific override is not supported. + +javascript-timezone:: + Enable and configure the ability to change a common timezone for dates + in gitweb output via JavaScript. Dates in gitweb output include + authordate and committerdate in "commit", "commitdiff" and "log" + views, and taggerdate in "tag" view. Enabled by default. ++ +The value is a list of three values: a default timezone (for if the client +hasn't selected some other timezone and saved it in a cookie), a name of cookie +where to store selected timezone, and a CSS class used to mark up +dates for manipulation. If you want to turn this feature off, set "default" +to empty list: `[]`. ++ +Typical gitweb config files will only change starting (default) timezone, +and leave other elements at their default values: ++ +--------------------------------------------------------------------------- +$feature{'javascript-timezone'}{'default'}[0] = "utc"; +--------------------------------------------------------------------------- ++ +The example configuration presented here is guaranteed to be backwards +and forward compatible. ++ +Timezone values can be "local" (for local timezone that browser uses), "utc" +(what gitweb uses when JavaScript or this feature is disabled), or numerical +timezones in the form of "+/-HHMM", such as "+0200". ++ +Project specific override is not supported. + + +EXAMPLES +-------- + +To enable blame, pickaxe search, and snapshot support (allowing "tar.gz" and +"zip" snapshots), while allowing individual projects to turn them off, put +the following in your GITWEB_CONFIG file: + + $feature{'blame'}{'default'} = [1]; + $feature{'blame'}{'override'} = 1; + + $feature{'pickaxe'}{'default'} = [1]; + $feature{'pickaxe'}{'override'} = 1; + + $feature{'snapshot'}{'default'} = ['zip', 'tgz']; + $feature{'snapshot'}{'override'} = 1; + +If you allow overriding for the snapshot feature, you can specify which +snapshot formats are globally disabled. You can also add any command line +options you want (such as setting the compression level). For instance, you +can disable Zip compressed snapshots and set *gzip*(1) to run at level 6 by +adding the following lines to your gitweb configuration file: + + $known_snapshot_formats{'zip'}{'disabled'} = 1; + $known_snapshot_formats{'tgz'}{'compressor'} = ['gzip','-6']; + +ENVIRONMENT +----------- +The location of per-instance and system-wide configuration files can be +overridden using the following environment variables: + +GITWEB_CONFIG:: + Sets location of per-instance configuration file. +GITWEB_CONFIG_SYSTEM:: + Sets location of fallback system-wide configuration file. + This file is read only if per-instance one does not exist. +GITWEB_CONFIG_COMMON:: + Sets location of common system-wide configuration file. + + +FILES +----- +gitweb_config.perl:: + This is default name of per-instance configuration file. The + format of this file is described above. +/etc/gitweb.conf:: + This is default name of fallback system-wide configuration + file. This file is used only if per-instance configuration + variable is not found. +/etc/gitweb-common.conf:: + This is default name of common system-wide configuration + file. + + +SEE ALSO +-------- +linkgit:gitweb[1], linkgit:git-instaweb[1] + +'gitweb/README', 'gitweb/INSTALL' + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt new file mode 100644 index 0000000000..605a085326 --- /dev/null +++ b/Documentation/gitweb.txt @@ -0,0 +1,704 @@ +gitweb(1) +========= + +NAME +---- +gitweb - Git web interface (web frontend to Git repositories) + +SYNOPSIS +-------- +To get started with gitweb, run linkgit:git-instaweb[1] from a git repository. +This would configure and start your web server, and run web browser pointing to +gitweb. + + +DESCRIPTION +----------- +Gitweb provides a web interface to git repositories. It's features include: + +* Viewing multiple Git repositories with common root. +* Browsing every revision of the repository. +* Viewing the contents of files in the repository at any revision. +* Viewing the revision log of branches, history of files and directories, + see what was changed when, by who. +* Viewing the blame/annotation details of any file (if enabled). +* Generating RSS and Atom feeds of commits, for any branch. + The feeds are auto-discoverable in modern web browsers. +* Viewing everything that was changed in a revision, and step through + revisions one at a time, viewing the history of the repository. +* Finding commits which commit messages matches given search term. + +See http://git.kernel.org/?p=git/git.git;a=tree;f=gitweb[] or +http://repo.or.cz/w/git.git/tree/HEAD:/gitweb/[] for gitweb source code, +browsed using gitweb itself. + + +CONFIGURATION +------------- +Various aspects of gitweb's behavior can be controlled through the configuration +file 'gitweb_config.perl' or '/etc/gitweb.conf'. See the linkgit:gitweb.conf[5] +for details. + +Repositories +~~~~~~~~~~~~ +Gitweb can show information from one or more Git repositories. These +repositories have to be all on local filesystem, and have to share common +repository root, i.e. be all under a single parent repository (but see also +"Advanced web server setup" section, "Webserver configuration with multiple +projects' root" subsection). + +----------------------------------------------------------------------- +our $projectroot = '/path/to/parent/directory'; +----------------------------------------------------------------------- + +The default value for `$projectroot` is '/pub/git'. You can change it during +building gitweb via `GITWEB_PROJECTROOT` build configuration variable. + +By default all git repositories under `$projectroot` are visible and available +to gitweb. The list of projects is generated by default by scanning the +`$projectroot` directory for git repositories (for object databases to be +more exact; gitweb is not interested in a working area, and is best suited +to showing "bare" repositories). + +The name of repository in gitweb is path to it's `$GIT_DIR` (it's object +database) relative to `$projectroot`. Therefore the repository $repo can be +found at "$projectroot/$repo". + + +Projects list file format +~~~~~~~~~~~~~~~~~~~~~~~~~ +Instead of having gitweb find repositories by scanning filesystem +starting from $projectroot, you can provide a pre-generated list of +visible projects by setting `$projects_list` to point to a plain text +file with a list of projects (with some additional info). + +This file uses the following format: + +* One record (for project / repository) per line; does not support line +continuation (newline escaping). + +* Leading and trailing whitespace are ignored. + +* Whitespace separated fields; any run of whitespace can be used as field +separator (rules for Perl's "`split(" ", $line)`"). + +* Fields use modified URI encoding, defined in RFC 3986, section 2.1 +(Percent-Encoding), or rather "Query string encoding" (see +link:http://en.wikipedia.org/wiki/Query_string#URL_encoding[]), the difference +being that SP (" ") can be encoded as "{plus}" (and therefore "{plus}" has to be +also percent-encoded). ++ +Reserved characters are: "%" (used for encoding), "{plus}" (can be used to +encode SPACE), all whitespace characters as defined in Perl, including SP, +TAB and LF, (used to separate fields in a record). + +* Currently recognized fields are: +<repository path>:: + path to repository GIT_DIR, relative to `$projectroot` +<repository owner>:: + displayed as repository owner, preferably full name, or email, + or both + +You can generate the projects list index file using the project_index action +(the 'TXT' link on projects list page) directly from gitweb; see also +"Generating projects list using gitweb" section below. + +Example contents: +----------------------------------------------------------------------- +foo.git Joe+R+Hacker+<joe@example.com> +foo/bar.git O+W+Ner+<owner@example.org> +----------------------------------------------------------------------- + + +By default this file controls only which projects are *visible* on projects +list page (note that entries that do not point to correctly recognized git +repositories won't be displayed by gitweb). Even if a project is not +visible on projects list page, you can view it nevertheless by hand-crafting +a gitweb URL. By setting `$strict_export` configuration variable (see +linkgit:gitweb.conf[5]) to true value you can allow viewing only of +repositories also shown on the overview page (i.e. only projects explicitly +listed in projects list file will be accessible). + + +Generating projects list using gitweb +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +We assume that GITWEB_CONFIG has its default Makefile value, namely +'gitweb_config.perl'. Put the following in 'gitweb_make_index.perl' file: +---------------------------------------------------------------------------- +read_config_file("gitweb_config.perl"); +$projects_list = $projectroot; +---------------------------------------------------------------------------- + +Then create the following script to get list of project in the format +suitable for GITWEB_LIST build configuration variable (or +`$projects_list` variable in gitweb config): + +---------------------------------------------------------------------------- +#!/bin/sh + +export GITWEB_CONFIG="gitweb_make_index.perl" +export GATEWAY_INTERFACE="CGI/1.1" +export HTTP_ACCEPT="*/*" +export REQUEST_METHOD="GET" +export QUERY_STRING="a=project_index" + +perl -- /var/www/cgi-bin/gitweb.cgi +---------------------------------------------------------------------------- + +Run this script and save its output to a file. This file could then be used +as projects list file, which means that you can set `$projects_list` to its +filename. + + +Controlling access to git repositories +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +By default all git repositories under `$projectroot` are visible and +available to gitweb. You can however configure how gitweb controls access +to repositories. + +* As described in "Projects list file format" section, you can control which +projects are *visible* by selectively including repositories in projects +list file, and setting `$projects_list` gitweb configuration variable to +point to it. With `$strict_export` set, projects list file can be used to +control which repositories are *available* as well. + +* You can configure gitweb to only list and allow viewing of the explicitly +exported repositories, via `$export_ok` variable in gitweb config file; see +linkgit:gitweb.conf[5] manpage. If it evaluates to true, gitweb shows +repositories only if this file named by `$export_ok` exists in its object +database (if directory has the magic file named `$export_ok`). ++ +For example linkgit:git-daemon[1] by default (unless `--export-all` option +is used) allows pulling only for those repositories that have +'git-daemon-export-ok' file. Adding ++ +-------------------------------------------------------------------------- +our $export_ok = "git-daemon-export-ok"; +-------------------------------------------------------------------------- ++ +makes gitweb show and allow access only to those repositories that can be +fetched from via `git://` protocol. + +* Finally, it is possible to specify an arbitrary perl subroutine that will +be called for each repository to determine if it can be exported. The +subroutine receives an absolute path to the project (repository) as its only +parameter (i.e. "$projectroot/$project"). ++ +For example, if you use mod_perl to run the script, and have dumb +HTTP protocol authentication configured for your repositories, you +can use the following hook to allow access only if the user is +authorized to read the files: ++ +-------------------------------------------------------------------------- +$export_auth_hook = sub { + use Apache2::SubRequest (); + use Apache2::Const -compile => qw(HTTP_OK); + my $path = "$_[0]/HEAD"; + my $r = Apache2::RequestUtil->request; + my $sub = $r->lookup_file($path); + return $sub->filename eq $path + && $sub->status == Apache2::Const::HTTP_OK; +}; +-------------------------------------------------------------------------- + + +Per-repository gitweb configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can configure individual repositories shown in gitweb by creating file +in the 'GIT_DIR' of git repository, or by setting some repo configuration +variable (in 'GIT_DIR/config', see linkgit:git-config[1]). + +You can use the following files in repository: + +README.html:: + A html file (HTML fragment) which is included on the gitweb project + "summary" page inside `<div>` block element. You can use it for longer + description of a project, to provide links (for example to project's + homepage), etc. This is recognized only if XSS prevention is off + (`$prevent_xss` is false, see linkgit:gitweb.conf[5]); a way to include + a README safely when XSS prevention is on may be worked out in the + future. + +description (or `gitweb.description`):: + Short (shortened to `$projects_list_description_width` in the projects + list page, which is 25 characters by default; see + linkgit:gitweb.conf[5]) single line description of a project (of a + repository). Plain text file; HTML will be escaped. By default set to ++ +------------------------------------------------------------------------------- +Unnamed repository; edit this file to name it for gitweb. +------------------------------------------------------------------------------- ++ +from the template during repository creation, usually installed in +'/usr/share/git-core/templates/'. You can use the `gitweb.description` repo +configuration variable, but the file takes precedence. + +category (or `gitweb.category`):: + Singe line category of a project, used to group projects if + `$projects_list_group_categories` is enabled. By default (file and + configuration variable absent), uncategorized projects are put in the + `$project_list_default_category` category. You can use the + `gitweb.category` repo configuration variable, but the file takes + precedence. ++ +The configuration variables `$projects_list_group_categories` and +`$project_list_default_category` are described in linkgit:gitweb.conf[5] + +cloneurl (or multiple-valued `gitweb.url`):: + File with repository URL (used for clone and fetch), one per line. + Displayed in the project summary page. You can use multiple-valued + `gitweb.url` repository configuration variable for that, but the file + takes precedence. ++ +This is per-repository enhancement / version of global prefix-based +`@git_base_url_list` gitweb configuration variable (see +linkgit:gitweb.conf[5]). + +gitweb.owner:: + You can use the `gitweb.owner` repository configuration variable to set + repository's owner. It is displayed in the project list and summary + page. ++ +If it's not set, filesystem directory's owner is used (via GECOS field, +i.e. real name field from *getpwuid*(3)) if `$projects_list` is unset +(gitweb scans `$projectroot` for repositories); if `$projects_list` +points to file with list of repositories, then project owner defaults to +value from this file for given repository. + +various `gitweb.*` config variables (in config):: + Read description of `%feature` hash for detailed list, and descriptions. + See also "Configuring gitweb features" section in linkgit:gitweb.conf[5] + + +ACTIONS, AND URLS +----------------- +Gitweb can use path_info (component) based URLs, or it can pass all necessary +information via query parameters. The typical gitweb URLs are broken down in to +five components: + +----------------------------------------------------------------------- +.../gitweb.cgi/<repo>/<action>/<revision>:/<path>?<arguments> +----------------------------------------------------------------------- + +repo:: + The repository the action will be performed on. ++ +All actions except for those that list all available projects, +in whatever form, require this parameter. + +action:: + The action that will be run. Defaults to 'projects_list' if repo + is not set, and to 'summary' otherwise. + +revision:: + Revision shown. Defaults to HEAD. + +path:: + The path within the <repository> that the action is performed on, + for those actions that require it. + +arguments:: + Any arguments that control the behaviour of the action. + +Some actions require or allow to specify two revisions, and sometimes even two +pathnames. In most general form such path_info (component) based gitweb URL +looks like this: + +----------------------------------------------------------------------- +.../gitweb.cgi/<repo>/<action>/<revision_from>:/<path_from>..<revision_to>:/<path_to>?<arguments> +----------------------------------------------------------------------- + + +Each action is implemented as a subroutine, and must be present in %actions +hash. Some actions are disabled by default, and must be turned on via feature +mechanism. For example to enable 'blame' view add the following to gitweb +configuration file: + +----------------------------------------------------------------------- +$feature{'blame'}{'default'} = [1]; +----------------------------------------------------------------------- + + +Actions: +~~~~~~~~ +The standard actions are: + +project_list:: + Lists the available Git repositories. This is the default command if no + repository is specified in the URL. + +summary:: + Displays summary about given repository. This is the default command if + no action is specified in URL, and only repository is specified. + +heads:: +remotes:: + Lists all local or all remote-tracking branches in given repository. ++ +The latter is not available by default, unless configured. + +tags:: + List all tags (lightweight and annotated) in given repository. + +blob:: +tree:: + Shows the files and directories in a given repository path, at given + revision. This is default command if no action is specified in the URL, + and path is given. + +blob_plain:: + Returns the raw data for the file in given repository, at given path and + revision. Links to this action are marked 'raw'. + +blobdiff:: + Shows the difference between two revisions of the same file. + +blame:: +blame_incremental:: + Shows the blame (also called annotation) information for a file. On a + per line basis it shows the revision in which that line was last changed + and the user that committed the change. The incremental version (which + if configured is used automatically when JavaScript is enabled) uses + Ajax to incrementally add blame info to the contents of given file. ++ +This action is disabled by default for performance reasons. + +commit:: +commitdiff:: + Shows information about a specific commit in a repository. The 'commit' + view shows information about commit in more detail, the 'commitdiff' + action shows changeset for given commit. + +patch:: + Returns the commit in plain text mail format, suitable for applying with + linkgit:git-am[1]. + +tag:: + Display specific annotated tag (tag object). + +log:: +shortlog:: + Shows log information (commit message or just commit subject) for a + given branch (starting from given revision). ++ +The 'shortlog' view is more compact; it shows one commit per line. + +history:: + Shows history of the file or directory in a given repository path, + starting from given revision (defaults to HEAD, i.e. default branch). ++ +This view is similar to 'shortlog' view. + +rss:: +atom:: + Generates an RSS (or Atom) feed of changes to repository. + + +WEBSERVER CONFIGURATION +----------------------- +This section explains how to configure some common webservers to run gitweb. In +all cases, `/path/to/gitweb` in the examples is the directory you ran installed +gitweb in, and contains `gitweb_config.perl`. + +If you've configured a web server that isn't listed here for gitweb, please send +in the instructions so they can be included in a future release. + +Apache as CGI +~~~~~~~~~~~~~ +Apache must be configured to support CGI scripts in the directory in +which gitweb is installed. Let's assume that it is '/var/www/cgi-bin' +directory. + +----------------------------------------------------------------------- +ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" + +<Directory "/var/www/cgi-bin"> + Options Indexes FollowSymlinks ExecCGI + AllowOverride None + Order allow,deny + Allow from all +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/cgi-bin/gitweb.cgi + +Apache with mod_perl, via ModPerl::Registry +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can use mod_perl with gitweb. You must install Apache::Registry +(for mod_perl 1.x) or ModPerl::Registry (for mod_perl 2.x) to enable +this support. + +Assuming that gitweb is installed to '/var/www/perl', the following +Apache configuration (for mod_perl 2.x) is suitable. + +----------------------------------------------------------------------- +Alias /perl "/var/www/perl" + +<Directory "/var/www/perl"> + SetHandler perl-script + PerlResponseHandler ModPerl::Registry + PerlOptions +ParseHeaders + Options Indexes FollowSymlinks +ExecCGI + AllowOverride None + Order allow,deny + Allow from all +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/perl/gitweb.cgi + +Apache with FastCGI +~~~~~~~~~~~~~~~~~~~ +Gitweb works with Apache and FastCGI. First you need to rename, copy +or symlink gitweb.cgi to gitweb.fcgi. Let's assume that gitweb is +installed in '/usr/share/gitweb' directory. The following Apache +configuration is suitable (UNTESTED!) + +----------------------------------------------------------------------- +FastCgiServer /usr/share/gitweb/gitweb.cgi +ScriptAlias /gitweb /usr/share/gitweb/gitweb.cgi + +Alias /gitweb/static /usr/share/gitweb/static +<Directory /usr/share/gitweb/static> + SetHandler default-handler +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/gitweb + + +ADVANCED WEB SERVER SETUP +------------------------- +All of those examples use request rewriting, and need `mod_rewrite` +(or equivalent; examples below are written for Apache). + +Single URL for gitweb and for fetching +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If you want to have one URL for both gitweb and your `http://` +repositories, you can configure Apache like this: + +----------------------------------------------------------------------- +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ \ + /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> +----------------------------------------------------------------------- + +The above configuration expects your public repositories to live under +'/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, +both as cloneable GIT URL and as browseable gitweb interface. If you then +start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` +then you can even use the `git://` URL with exactly the same path. + +Setting the environment variable `GITWEB_CONFIG` will tell gitweb to use the +named file (i.e. in this example '/etc/gitweb.conf') as a configuration for +gitweb. You don't really need it in above example; it is required only if +your configuration file is in different place than built-in (during +compiling gitweb) 'gitweb_config.perl' or '/etc/gitweb.conf'. See +linkgit:gitweb.conf[5] for details, especially information about precedence +rules. + +If you use the rewrite rules from the example you *might* also need +something like the following in your gitweb configuration file +('/etc/gitweb.conf' following example): +---------------------------------------------------------------------------- +@stylesheets = ("/some/absolute/path/gitweb.css"); +$my_uri = "/"; +$home_link = "/"; +$per_request_config = 1; +---------------------------------------------------------------------------- +Nowadays though gitweb should create HTML base tag when needed (to set base +URI for relative links), so it should work automatically. + + +Webserver configuration with multiple projects' root +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If you want to use gitweb with several project roots you can edit your +Apache virtual host and gitweb configuration files in the following way. + +The virtual host configuration (in Apache configuration file) should look +like this: +-------------------------------------------------------------------------- +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT] + + # look for a public_git folder in unix users' home + # http://git.example.org/~<user>/ + RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/+<user>/ + #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/user/<user>/ + #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # defined list of project roots + RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT] + RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT] + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ \ + /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> +-------------------------------------------------------------------------- + +Here actual project root is passed to gitweb via `GITWEB_PROJECT_ROOT` +environment variable from a web server, so you need to put the following +line in gitweb configuration file ('/etc/gitweb.conf' in above example): +-------------------------------------------------------------------------- +$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; +-------------------------------------------------------------------------- +*Note* that this requires to be set for each request, so either +`$per_request_config` must be false, or the above must be put in code +referenced by `$per_request_config`; + +These configurations enable two things. First, each unix user (`<user>`) of +the server will be able to browse through gitweb git repositories found in +'~/public_git/' with the following url: + + http://git.example.org/~<user>/ + +If you do not want this feature on your server just remove the second +rewrite rule. + +If you already use `mod_userdir` in your virtual host or you don't want to +use the \'~' as first character, just comment or remove the second rewrite +rule, and uncomment one of the following according to what you want. + +Second, repositories found in '/pub/scm/' and '/var/git/' will be accessible +through `http://git.example.org/scm/` and `http://git.example.org/var/`. +You can add as many project roots as you want by adding rewrite rules like +the third and the fourth. + + +PATH_INFO usage +~~~~~~~~~~~~~~~ +If you enable PATH_INFO usage in gitweb by putting +---------------------------------------------------------------------------- +$feature{'pathinfo'}{'default'} = [1]; +---------------------------------------------------------------------------- +in your gitweb configuration file, it is possible to set up your server so +that it consumes and produces URLs in the form + + http://git.example.com/project.git/shortlog/sometag + +i.e. without 'gitweb.cgi' part, by using a configuration such as the +following. This configuration assumes that '/var/www/gitweb' is the +DocumentRoot of your webserver, contains the gitweb.cgi script and +complementary static files (stylesheet, favicon, JavaScript): + +---------------------------------------------------------------------------- +<VirtualHost *:80> + ServerAlias git.example.com + + DocumentRoot /var/www/gitweb + + <Directory /var/www/gitweb> + Options ExecCGI + AddHandler cgi-script cgi + + DirectoryIndex gitweb.cgi + + RewriteEngine On + RewriteCond %{REQUEST_FILENAME} !-f + RewriteCond %{REQUEST_FILENAME} !-d + RewriteRule ^.* /gitweb.cgi/$0 [L,PT] + </Directory> +</VirtualHost> +---------------------------------------------------------------------------- +The rewrite rule guarantees that existing static files will be properly +served, whereas any other URL will be passed to gitweb as PATH_INFO +parameter. + +*Notice* that in this case you don't need special settings for +`@stylesheets`, `$my_uri` and `$home_link`, but you lose "dumb client" +access to your project .git dirs (described in "Single URL for gitweb and +for fetching" section). A possible workaround for the latter is the +following: in your project root dir (e.g. '/pub/git') have the projects +named *without* a .git extension (e.g. '/pub/git/project' instead of +'/pub/git/project.git') and configure Apache as follows: +---------------------------------------------------------------------------- +<VirtualHost *:80> + ServerAlias git.example.com + + DocumentRoot /var/www/gitweb + + AliasMatch ^(/.*?)(\.git)(/.*)?$ /pub/git$1$3 + <Directory /var/www/gitweb> + Options ExecCGI + AddHandler cgi-script cgi + + DirectoryIndex gitweb.cgi + + RewriteEngine On + RewriteCond %{REQUEST_FILENAME} !-f + RewriteCond %{REQUEST_FILENAME} !-d + RewriteRule ^.* /gitweb.cgi/$0 [L,PT] + </Directory> +</VirtualHost> +---------------------------------------------------------------------------- + +The additional AliasMatch makes it so that + + http://git.example.com/project.git + +will give raw access to the project's git dir (so that the project can be +cloned), while + + http://git.example.com/project + +will provide human-friendly gitweb access. + +This solution is not 100% bulletproof, in the sense that if some project has +a named ref (branch, tag) starting with 'git/', then paths such as + + http://git.example.com/project/command/abranch..git/abranch + +will fail with a 404 error. + + +BUGS +---- +Please report any bugs or feature requests to git@vger.kernel.org, +putting "gitweb" in the subject of email. + +SEE ALSO +-------- +linkgit:gitweb.conf[5], linkgit:git-instaweb[1] + +'gitweb/README', 'gitweb/INSTALL' + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index 1ef55fffcf..5e4f362ff8 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -7,6 +7,7 @@ gitworkflows - An overview of recommended workflows with git SYNOPSIS -------- +[verse] git * diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 1f029f8aa0..3595b586bc 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -131,7 +131,7 @@ to point at the new commit. you have. In such these cases, you do not make a new <<def_merge,merge>> <<def_commit,commit>> but instead just update to his revision. This will happen frequently on a - <<def_tracking_branch,tracking branch>> of a remote + <<def_remote_tracking_branch,remote-tracking branch>> of a remote <<def_repository,repository>>. [[def_fetch]]fetch:: @@ -161,8 +161,8 @@ to point at the new commit. [[def_head]]head:: A <<def_ref,named reference>> to the <<def_commit,commit>> at the tip of a - <<def_branch,branch>>. Heads are stored in - `$GIT_DIR/refs/heads/`, except when using packed refs. (See + <<def_branch,branch>>. Heads are stored in a file in + `$GIT_DIR/refs/heads/` directory, except when using packed refs. (See linkgit:git-pack-refs[1].) [[def_HEAD]]HEAD:: @@ -170,8 +170,8 @@ to point at the new commit. working tree>> is normally derived from the state of the tree referred to by HEAD. HEAD is a reference to one of the <<def_head,heads>> in your repository, except when using a - <<def_detached_HEAD,detached HEAD>>, in which case it may - reference an arbitrary commit. + <<def_detached_HEAD,detached HEAD>>, in which case it directly + references an arbitrary commit. [[def_head_ref]]head ref:: A synonym for <<def_head,head>>. @@ -260,7 +260,7 @@ This commit is referred to as a "merge commit", or sometimes just a The default upstream <<def_repository,repository>>. Most projects have at least one upstream project which they track. By default 'origin' is used for that purpose. New upstream updates - will be fetched into remote <<def_tracking_branch,tracking branches>> named + will be fetched into remote <<def_remote_tracking_branch,remote-tracking branches>> named origin/name-of-upstream-branch, which you can see using `git branch -r`. @@ -273,6 +273,61 @@ This commit is referred to as a "merge commit", or sometimes just a <<def_pack,pack>>, to assist in efficiently accessing the contents of a pack. +[[def_pathspec]]pathspec:: + Pattern used to specify paths. ++ +Pathspecs are used on the command line of "git ls-files", "git +ls-tree", "git add", "git grep", "git diff", "git checkout", +and many other commands to +limit the scope of operations to some subset of the tree or +worktree. See the documentation of each command for whether +paths are relative to the current directory or toplevel. The +pathspec syntax is as follows: + +* any path matches itself +* the pathspec up to the last slash represents a + directory prefix. The scope of that pathspec is + limited to that subtree. +* the rest of the pathspec is a pattern for the remainder + of the pathname. Paths relative to the directory + prefix will be matched against that pattern using fnmatch(3); + in particular, '*' and '?' _can_ match directory separators. ++ +For example, Documentation/*.jpg will match all .jpg files +in the Documentation subtree, +including Documentation/chapter_1/figure_1.jpg. + ++ +A pathspec that begins with a colon `:` has special meaning. In the +short form, the leading colon `:` is followed by zero or more "magic +signature" letters (which optionally is terminated by another colon `:`), +and the remainder is the pattern to match against the path. The optional +colon that terminates the "magic signature" can be omitted if the pattern +begins with a character that cannot be a "magic signature" and is not a +colon. ++ +In the long form, the leading colon `:` is followed by a open +parenthesis `(`, a comma-separated list of zero or more "magic words", +and a close parentheses `)`, and the remainder is the pattern to match +against the path. ++ +The "magic signature" consists of an ASCII symbol that is not +alphanumeric. ++ +-- +top `/`;; + The magic word `top` (mnemonic: `/`) makes the pattern match + from the root of the working tree, even when you are running + the command from inside a subdirectory. +-- ++ +Currently only the slash `/` is recognized as the "magic signature", +but it is envisioned that we will support more types of magic in later +versions of git. ++ +A pathspec with only a colon means "there is no pathspec". This form +should not be combined with other pathspec. + [[def_parent]]parent:: A <<def_commit_object,commit object>> contains a (possibly empty) list of the logical predecessor(s) in the line of development, i.e. its @@ -327,8 +382,9 @@ This commit is referred to as a "merge commit", or sometimes just a [[def_ref]]ref:: A 40-byte hex representation of a <<def_SHA1,SHA1>> or a name that - denotes a particular <<def_object,object>>. These may be stored in - `$GIT_DIR/refs/`. + denotes a particular <<def_object,object>>. They may be stored in + a file under `$GIT_DIR/refs/` directory, or + in the `$GIT_DIR/packed-refs` file. [[def_reflog]]reflog:: A reflog shows the local "history" of a ref. In other words, @@ -349,6 +405,14 @@ This commit is referred to as a "merge commit", or sometimes just a master branch head as to-upstream branch at $URL". See also linkgit:git-push[1]. +[[def_remote_tracking_branch]]remote-tracking branch:: + A regular git <<def_branch,branch>> that is used to follow changes from + another <<def_repository,repository>>. A remote-tracking + branch should not contain direct modifications or have local commits + made to it. A remote-tracking branch can usually be + identified as the right-hand-side <<def_ref,ref>> in a Pull: + <<def_refspec,refspec>>. + [[def_repository]]repository:: A collection of <<def_ref,refs>> together with an <<def_object_database,object database>> containing all objects @@ -396,14 +460,14 @@ This commit is referred to as a "merge commit", or sometimes just a command. [[def_tag]]tag:: - A <<def_ref,ref>> pointing to a <<def_tag_object,tag>> or - <<def_commit_object,commit object>>. In contrast to a <<def_head,head>>, - a tag is not changed by a <<def_commit,commit>>. Tags (not - <<def_tag_object,tag objects>>) are stored in `$GIT_DIR/refs/tags/`. A - git tag has nothing to do with a Lisp tag (which would be - called an <<def_object_type,object type>> in git's context). A - tag is most typically used to mark a particular point in the - commit ancestry <<def_chain,chain>>. + A <<def_ref,ref>> under `refs/tags/` namespace that points to an + object of an arbitrary type (typically a tag points to either a + <<def_tag_object,tag>> or a <<def_commit_object,commit object>>). + In contrast to a <<def_head,head>>, a tag is not updated by + the `commit` command. A git tag has nothing to do with a Lisp + tag (which would be called an <<def_object_type,object type>> + in git's context). A tag is most typically used to mark a particular + point in the commit ancestry <<def_chain,chain>>. [[def_tag_object]]tag object:: An <<def_object,object>> containing a <<def_ref,ref>> pointing to @@ -418,14 +482,6 @@ This commit is referred to as a "merge commit", or sometimes just a that each contain very well defined concepts or small incremental yet related changes. -[[def_tracking_branch]]tracking branch:: - A regular git <<def_branch,branch>> that is used to follow changes from - another <<def_repository,repository>>. A tracking - branch should not contain direct modifications or have local commits - made to it. A tracking branch can usually be - identified as the right-hand-side <<def_ref,ref>> in a Pull: - <<def_refspec,refspec>>. - [[def_tree]]tree:: Either a <<def_working_tree,working tree>>, or a <<def_tree_object,tree object>> together with the dependent <<def_blob_object,blob>> and tree objects diff --git a/Documentation/howto/maintain-git.txt b/Documentation/howto/maintain-git.txt index d527b30770..8823a37067 100644 --- a/Documentation/howto/maintain-git.txt +++ b/Documentation/howto/maintain-git.txt @@ -176,7 +176,7 @@ by doing the following: - Update "What's cooking" message to review the updates to existing topics, newly added topics and graduated topics. - This step is helped with Meta/UWC script (where Meta/ contains + This step is helped with Meta/cook script (where Meta/ contains a checkout of the 'todo' branch). - Merge topics to 'next'. For each branch whose tip is not @@ -197,10 +197,9 @@ by doing the following: - Nothing is next-worthy; do not do anything. - - Rebase topics that do not have any commit in next yet. This - step is optional but sometimes is worth doing when an old - series that is not in next can take advantage of low-level - framework change that is merged to 'master' already. + - [** OBSOLETE **] Optionally rebase topics that do not have any commit + in next yet, when they can take advantage of low-level framework + change that is merged to 'master' already. $ git rebase master ai/topic @@ -209,7 +208,7 @@ by doing the following: pre-rebase hook to make sure that topics that are already in 'next' are not rebased beyond the merged commit. - - Rebuild "pu" to merge the tips of topics not in 'next'. + - [** OBSOLETE **] Rebuild "pu" to merge the tips of topics not in 'next'. $ git checkout pu $ git reset --hard next @@ -241,7 +240,7 @@ by doing the following: - Fetch html and man branches back from k.org, and push four integration branches and the two documentation branches to - repo.or.cz + repo.or.cz and other mirrors. Some observations to be made. diff --git a/Documentation/howto/using-merge-subtree.txt b/Documentation/howto/using-merge-subtree.txt index 0953a50b69..2933056120 100644 --- a/Documentation/howto/using-merge-subtree.txt +++ b/Documentation/howto/using-merge-subtree.txt @@ -71,5 +71,5 @@ Additional tips relevant parts of your tree. - Please note that if the other project merges from you, then it will - connects its history to yours, which can be something they don't want + connect its history to yours, which can be something they don't want to. diff --git a/Documentation/install-doc-quick.sh b/Documentation/install-doc-quick.sh index 35f440876e..327f69bcf5 100755 --- a/Documentation/install-doc-quick.sh +++ b/Documentation/install-doc-quick.sh @@ -1,31 +1,39 @@ #!/bin/sh -# This requires a branch named in $head -# (usually 'man' or 'html', provided by the git.git repository) -set -e -head="$1" -mandir="$2" -SUBDIRECTORY_OK=t -USAGE='<refname> <target directory>' -. "$(git --exec-path)"/git-sh-setup -cd_to_toplevel +# This requires git-manpages and/or git-htmldocs repositories -test -z "$mandir" && usage -if ! git rev-parse --verify "$head^0" >/dev/null; then - echo >&2 "head: $head does not exist in the current repository" - usage +repository=${1?repository} +destdir=${2?destination} + +head=master GIT_DIR= +for d in "$repository/.git" "$repository" +do + if GIT_DIR="$d" git rev-parse refs/heads/master >/dev/null 2>&1 + then + GIT_DIR="$d" + export GIT_DIR + break + fi +done + +if test -z "$GIT_DIR" +then + echo >&2 "Neither $repository nor $repository/.git is a repository" + exit 1 fi -GIT_INDEX_FILE=`pwd`/.quick-doc.index -export GIT_INDEX_FILE +GIT_WORK_TREE=$(pwd) +GIT_INDEX_FILE=$(pwd)/.quick-doc.$$ +export GIT_INDEX_FILE GIT_WORK_TREE rm -f "$GIT_INDEX_FILE" trap 'rm -f "$GIT_INDEX_FILE"' 0 git read-tree $head -git checkout-index -a -f --prefix="$mandir"/ +git checkout-index -a -f --prefix="$destdir"/ -if test -n "$GZ"; then +if test -n "$GZ" +then git ls-tree -r --name-only $head | - xargs printf "$mandir/%s\n" | + xargs printf "$destdir/%s\n" | xargs gzip -f fi rm -f "$GIT_INDEX_FILE" diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index b72f533970..861bd6f553 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -6,9 +6,31 @@ merge.conflictstyle:: a `>>>>>>>` marker. An alternate style, "diff3", adds a `|||||||` marker and the original text before the `=======` marker. +merge.defaultToUpstream:: + If merge is called without any commit argument, merge the upstream + branches configured for the current branch by using their last + observed values stored in their remote tracking branches. + The values of the `branch.<current branch>.merge` that name the + branches at the remote named by `branch.<current branch>.remote` + are consulted, and then they are mapped via `remote.<remote>.fetch` + to their corresponding remote tracking branches, and the tips of + these tracking branches are merged. + +merge.ff:: + By default, git does not create an extra merge commit when merging + a commit that is a descendant of the current commit. Instead, the + tip of the current branch is fast-forwarded. When set to `false`, + this variable tells git to create an extra merge commit in such + a case (equivalent to giving the `--no-ff` option from the command + line). When set to `only`, only such fast-forward merges are + allowed (equivalent to giving the `--ff-only` option from the + command line). + merge.log:: - Whether to include summaries of merged commits in newly created - merge commit messages. False by default. + In addition to branch names, populate the log message with at + most the specified number of one-line descriptions from the + actual commits that are being merged. Defaults to false, and + true is a synonym for 20. merge.renameLimit:: The number of files to consider when performing rename detection @@ -31,10 +53,10 @@ merge.stat:: merge.tool:: Controls which merge resolution program is used by - linkgit:git-mergetool[1]. Valid built-in values are: "kdiff3", - "tkdiff", "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff", - "diffuse", "ecmerge", "tortoisemerge", "p4merge", "araxis" and - "opendiff". Any other value is treated is custom merge tool + linkgit:git-mergetool[1]. Valid built-in values are: "araxis", + "bc3", "diffuse", "ecmerge", "emerge", "gvimdiff", "kdiff3", "meld", + "opendiff", "p4merge", "tkdiff", "tortoisemerge", "vimdiff" + and "xxdiff". Any other value is treated is custom merge tool and there must be a corresponding mergetool.<tool>.cmd option. merge.verbosity:: diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 722d704ff2..1a5c12e317 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -7,6 +7,11 @@ With --no-commit perform the merge but pretend the merge failed and do not autocommit, to give the user a chance to inspect and further tweak the merge result before committing. +--edit:: +-e:: + Invoke editor before committing successful merge to further + edit the default merge message. + --ff:: --no-ff:: Do not generate a merge commit if the merge resolved as @@ -16,11 +21,11 @@ inspect and further tweak the merge result before committing. With --no-ff Generate a merge commit even if the merge resolved as a fast-forward. ---log:: +--log[=<n>]:: --no-log:: In addition to branch names, populate the log message with - one-line descriptions from the actual commits that are being - merged. + one-line descriptions from at most <n> actual commits that are being + merged. See also linkgit:git-fmt-merge-msg[1]. + With --no-log do not list one-line descriptions from the actual commits being merged. @@ -75,9 +80,17 @@ option can be used to override --squash. ifndef::git-pull[] -q:: --quiet:: - Operate quietly. + Operate quietly. Implies --no-progress. -v:: --verbose:: Be verbose. + +--progress:: +--no-progress:: + Turn progress on/off explicitly. If neither is specified, + progress is shown if standard error is connected to a terminal. + Note that not all merge strategies may support progress + reporting. + endif::git-pull[] diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 049313d601..595a3cf1a7 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -40,6 +40,28 @@ the other tree did, declaring 'our' history contains all that happened in it. theirs;; This is opposite of 'ours'. +patience;; + With this option, 'merge-recursive' spends a little extra time + to avoid mismerges that sometimes occur due to unimportant + matching lines (e.g., braces from distinct functions). Use + this when the branches to be merged have diverged wildly. + See also linkgit:git-diff[1] `--patience`. + +ignore-space-change;; +ignore-all-space;; +ignore-space-at-eol;; + Treats lines with the indicated type of whitespace change as + unchanged for the sake of a three-way merge. Whitespace + changes mixed with other changes to a line are not ignored. + See also linkgit:git-diff[1] `-b`, `-w`, and + `--ignore-space-at-eol`. ++ +* If 'their' version only introduces whitespace changes to a line, + 'our' version is used; +* If 'our' version introduces whitespace changes but 'their' + version includes a substantial change, 'their' version is used; +* Otherwise, the merge proceeds in the usual way. + renormalize;; This runs a virtual check-out and check-in of all three stages of a file when resolving a three-way merge. This option is @@ -52,7 +74,11 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. -subtree[=path];; +rename-threshold=<n>;; + Controls the similarity threshold used for rename detection. + See also linkgit:git-diff[1] `-M`. + +subtree[=<path>];; This option is a more advanced form of 'subtree' strategy, where the strategy makes a guess on how two trees must be shifted to match with each other when merging. Instead, the specified path diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 9b6f3899ec..2a3dc8664f 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -1,5 +1,5 @@ ---pretty[='<format>']:: ---format='<format>':: +--pretty[=<format>]:: +--format=<format>:: Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', @@ -19,6 +19,11 @@ configuration (see linkgit:git-config[1]). This should make "--pretty=oneline" a whole lot more readable for people using 80-column terminals. +--no-abbrev-commit:: + Show the full 40-byte hexadecimal commit object name. This negates + `--abbrev-commit` and those options which imply it such as + "--oneline". It also overrides the 'log.abbrevCommit' variable. + --oneline:: This is a shorthand for "--pretty=oneline --abbrev-commit" used together. @@ -30,19 +35,34 @@ people using 80-column terminals. preferred by the user. For non plumbing commands this defaults to UTF-8. ---no-notes:: ---show-notes[=<ref>]:: +--notes[=<ref>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when - there is no `--pretty`, `--format` nor `--oneline` option is - given on the command line. + there is no `--pretty`, `--format` nor `--oneline` option given + on the command line. ++ +By default, the notes shown are from the notes refs listed in the +'core.notesRef' and 'notes.displayRef' variables (or corresponding +environment overrides). See linkgit:git-config[1] for more details. + -With an optional argument, add this ref to the list of notes. The ref -is taken to be in `refs/notes/` if it is not qualified. +With an optional '<ref>' argument, show this notes ref instead of the +default notes ref(s). The ref is taken to be in `refs/notes/` if it +is not qualified. ++ +Multiple --notes options can be combined to control which notes are +being displayed. Examples: "--notes=foo" will show only notes from +"refs/notes/foo"; "--notes=foo --notes" will show both notes from +"refs/notes/foo" and from the default notes ref(s). + +--no-notes:: + Do not show notes. This negates the above `--notes` option, by + resetting the list of notes refs from which notes are shown. + Options are parsed in the order given on the command line, so e.g. + "--notes --notes=foo --no-notes --notes=bar" will only show notes + from "refs/notes/bar". +--show-notes[=<ref>]:: --[no-]standard-notes:: - Enable or disable populating the notes ref list from the - 'core.notesRef' and 'notes.displayRef' variables (or - corresponding environment overrides). Enabled by default. - See linkgit:git-config[1]. + These options are deprecated. Use the above --notes/--no-notes + options instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index e2237ae4a0..39e6207269 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -1,166 +1,17 @@ -Commit Formatting -~~~~~~~~~~~~~~~~~ - -ifdef::git-rev-list[] -Using these options, linkgit:git-rev-list[1] will act similar to the -more specialized family of commit log tools: linkgit:git-log[1], -linkgit:git-show[1], and linkgit:git-whatchanged[1] -endif::git-rev-list[] - -include::pretty-options.txt[] - ---relative-date:: - - Synonym for `--date=relative`. - ---date={relative,local,default,iso,rfc,short,raw}:: - - Only takes effect for dates shown in human-readable format, such - as when using "--pretty". `log.date` config variable sets a default - value for log command's --date option. -+ -`--date=relative` shows dates relative to the current time, -e.g. "2 hours ago". -+ -`--date=local` shows timestamps in user's local timezone. -+ -`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. -+ -`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 -format, often found in E-mail messages. -+ -`--date=short` shows only date but not time, in `YYYY-MM-DD` format. -+ -`--date=raw` shows the date in the internal raw git format `%s %z` format. -+ -`--date=default` shows timestamps in the original timezone -(either committer's or author's). - -ifdef::git-rev-list[] ---header:: - - Print the contents of the commit in raw-format; each record is - separated with a NUL character. -endif::git-rev-list[] - ---parents:: - - Print the parents of the commit. Also enables parent - rewriting, see 'History Simplification' below. - ---children:: - - Print the children of the commit. Also enables parent - rewriting, see 'History Simplification' below. - -ifdef::git-rev-list[] ---timestamp:: - Print the raw commit timestamp. -endif::git-rev-list[] - ---left-right:: - - Mark which side of a symmetric diff a commit is reachable from. - Commits from the left side are prefixed with `<` and those from - the right with `>`. If combined with `--boundary`, those - commits are prefixed with `-`. -+ -For example, if you have this topology: -+ ------------------------------------------------------------------------ - y---b---b branch B - / \ / - / . - / / \ - o---x---a---a branch A ------------------------------------------------------------------------ -+ -you would get an output like this: -+ ------------------------------------------------------------------------ - $ git rev-list --left-right --boundary --pretty=oneline A...B - - >bbbbbbb... 3rd on b - >bbbbbbb... 2nd on b - <aaaaaaa... 3rd on a - <aaaaaaa... 2nd on a - -yyyyyyy... 1st on b - -xxxxxxx... 1st on a ------------------------------------------------------------------------ - ---graph:: - - Draw a text-based graphical representation of the commit history - on the left hand side of the output. This may cause extra lines - to be printed in between commits, in order for the graph history - to be drawn properly. -+ -This implies the '--topo-order' option by default, but the -'--date-order' option may also be specified. - -ifdef::git-rev-list[] ---count:: - Print a number stating how many commits would have been - listed, and suppress all other output. When used together - with '--left-right', instead print the counts for left and - right commits, separated by a tab. -endif::git-rev-list[] - - -ifndef::git-rev-list[] -Diff Formatting -~~~~~~~~~~~~~~~ - -Below are listed options that control the formatting of diff output. -Some of them are specific to linkgit:git-rev-list[1], however other diff -options may be given. See linkgit:git-diff-files[1] for more options. - --c:: - - With this option, diff output for a merge commit - shows the differences from each of the parents to the merge result - simultaneously instead of showing pairwise diff between a parent - and the result one at a time. Furthermore, it lists only files - which were modified from all parents. - ---cc:: - - This flag implies the '-c' options and further compresses the - patch output by omitting uninteresting hunks whose contents in - the parents have only two variants and the merge result picks - one of them without modification. - --m:: - - This flag makes the merge commits show the full diff like - regular commits; for each merge parent, a separate log entry - and diff is generated. An exception is that only diff against - the first parent is shown when '--first-parent' option is given; - in that case, the output represents the changes the merge - brought _into_ the then-current branch. - --r:: - - Show recursive diffs. - --t:: - - Show the tree objects in the diff output. This implies '-r'. -endif::git-rev-list[] - Commit Limiting ~~~~~~~~~~~~~~~ Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit -limiting may be applied. +limiting may be applied. Note that they are applied before commit +ordering and formatting options, such as '--reverse'. -- -n 'number':: --max-count=<number>:: - Limit the number of commits output. + Limit the number of commits to output. --skip=<number>:: @@ -221,11 +72,26 @@ endif::git-rev-list[] --merges:: - Print only merge commits. + Print only merge commits. This is exactly the same as `--min-parents=2`. --no-merges:: - Do not print commits with more than one parent. + Do not print commits with more than one parent. This is + exactly the same as `--max-parents=1`. + +--min-parents=<number>:: +--max-parents=<number>:: +--no-min-parents:: +--no-max-parents:: + + Show only commits which have at least (or at most) that many + commits. In particular, `--max-parents=1` is the same as `--no-merges`, + `--min-parents=2` is the same as `--merges`. `--max-parents=0` + gives all root commits and `--min-parents=3` all octopus merges. ++ +`--no-min-parents` and `--no-max-parents` reset these limits (to no limit) +again. Equivalent forms are `--min-parents=0` (any commit has 0 or more +parents) and `--max-parents=-1` (negative numbers denote no upper limit). --first-parent:: Follow only the first parent commit upon seeing a merge @@ -246,33 +112,37 @@ endif::git-rev-list[] Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. ---branches[=pattern]:: +--branches[=<pattern>]:: Pretend as if all the refs in `refs/heads` are listed - on the command line as '<commit>'. If `pattern` is given, limit + on the command line as '<commit>'. If '<pattern>' is given, limit branches to ones matching given shell glob. If pattern lacks '?', '*', or '[', '/*' at the end is implied. ---tags[=pattern]:: +--tags[=<pattern>]:: Pretend as if all the refs in `refs/tags` are listed - on the command line as '<commit>'. If `pattern` is given, limit + on the command line as '<commit>'. If '<pattern>' is given, limit tags to ones matching given shell glob. If pattern lacks '?', '*', or '[', '/*' at the end is implied. ---remotes[=pattern]:: +--remotes[=<pattern>]:: Pretend as if all the refs in `refs/remotes` are listed - on the command line as '<commit>'. If `pattern`is given, limit - remote tracking branches to ones matching given shell glob. + on the command line as '<commit>'. If '<pattern>' is given, limit + remote-tracking branches to ones matching given shell glob. If pattern lacks '?', '*', or '[', '/*' at the end is implied. ---glob=glob-pattern:: - Pretend as if all the refs matching shell glob `glob-pattern` +--glob=<glob-pattern>:: + Pretend as if all the refs matching shell glob '<glob-pattern>' are listed on the command line as '<commit>'. Leading 'refs/', is automatically prepended if missing. If pattern lacks '?', '*', or '[', '/*' at the end is implied. +--ignore-missing:: + + Upon seeing an invalid object name in the input, pretend as if + the bad input was not given. ifndef::git-rev-list[] --bisect:: @@ -300,6 +170,11 @@ ifdef::git-rev-list[] to /dev/null as the output does not have to be formatted. endif::git-rev-list[] +--cherry-mark:: + + Like `--cherry-pick` (see below) but mark equivalent commits + with `=` rather than omitting them, and inequivalent ones with `+`. + --cherry-pick:: Omit any commit that introduces the same change as @@ -308,12 +183,33 @@ endif::git-rev-list[] + For example, if you have two branches, `A` and `B`, a usual way to list all commits on only one side of them is with -`--left-right`, like the example above in the description of -that option. It however shows the commits that were cherry-picked +`--left-right` (see the example below in the description of +the `--left-right` option). It however shows the commits that were cherry-picked from the other branch (for example, "3rd on b" may be cherry-picked from branch A). With this option, such pairs of commits are excluded from the output. +--left-only:: +--right-only:: + + List only commits on the respective side of a symmetric range, + i.e. only those which would be marked `<` resp. `>` by + `--left-right`. ++ +For example, `--cherry-pick --right-only A...B` omits those +commits from `B` which are in `A` or are patch-equivalent to a commit in +`A`. In other words, this lists the `{plus}` commits from `git cherry A B`. +More precisely, `--cherry-pick --right-only --no-merges` gives the exact +list. + +--cherry:: + + A synonym for `--right-only --cherry-mark --no-merges`; useful to + limit the output to the commits on our side and mark those that + have been applied to the other side of a forked history with + `git log --cherry upstream...mybranch`, similar to + `git cherry upstream mybranch`. + -g:: --walk-reflogs:: @@ -376,7 +272,7 @@ Default mode:: --full-history:: - As the default mode but does not prune some history. + Same as the default mode, but does not prune some history. --dense:: @@ -417,7 +313,7 @@ that you are filtering for a file `foo` in this commit graph: \ / / / / `-------------' ----------------------------------------------------------------------- -The horizontal line of history A--P is taken to be the first parent of +The horizontal line of history A---P is taken to be the first parent of each merge. The commits are: * `I` is the initial commit, in which `foo` exists with contents @@ -730,3 +626,161 @@ These options are mostly targeted for packing of git repositories. --do-walk:: Overrides a previous --no-walk. + +Commit Formatting +~~~~~~~~~~~~~~~~~ + +ifdef::git-rev-list[] +Using these options, linkgit:git-rev-list[1] will act similar to the +more specialized family of commit log tools: linkgit:git-log[1], +linkgit:git-show[1], and linkgit:git-whatchanged[1] +endif::git-rev-list[] + +include::pretty-options.txt[] + +--relative-date:: + + Synonym for `--date=relative`. + +--date=(relative|local|default|iso|rfc|short|raw):: + + Only takes effect for dates shown in human-readable format, such + as when using "--pretty". `log.date` config variable sets a default + value for log command's --date option. ++ +`--date=relative` shows dates relative to the current time, +e.g. "2 hours ago". ++ +`--date=local` shows timestamps in user's local timezone. ++ +`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. ++ +`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 +format, often found in E-mail messages. ++ +`--date=short` shows only date but not time, in `YYYY-MM-DD` format. ++ +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ +`--date=default` shows timestamps in the original timezone +(either committer's or author's). + +ifdef::git-rev-list[] +--header:: + + Print the contents of the commit in raw-format; each record is + separated with a NUL character. +endif::git-rev-list[] + +--parents:: + + Print also the parents of the commit (in the form "commit parent..."). + Also enables parent rewriting, see 'History Simplification' below. + +--children:: + + Print also the children of the commit (in the form "commit child..."). + Also enables parent rewriting, see 'History Simplification' below. + +ifdef::git-rev-list[] +--timestamp:: + Print the raw commit timestamp. +endif::git-rev-list[] + +--left-right:: + + Mark which side of a symmetric diff a commit is reachable from. + Commits from the left side are prefixed with `<` and those from + the right with `>`. If combined with `--boundary`, those + commits are prefixed with `-`. ++ +For example, if you have this topology: ++ +----------------------------------------------------------------------- + y---b---b branch B + / \ / + / . + / / \ + o---x---a---a branch A +----------------------------------------------------------------------- ++ +you would get an output like this: ++ +----------------------------------------------------------------------- + $ git rev-list --left-right --boundary --pretty=oneline A...B + + >bbbbbbb... 3rd on b + >bbbbbbb... 2nd on b + <aaaaaaa... 3rd on a + <aaaaaaa... 2nd on a + -yyyyyyy... 1st on b + -xxxxxxx... 1st on a +----------------------------------------------------------------------- + +--graph:: + + Draw a text-based graphical representation of the commit history + on the left hand side of the output. This may cause extra lines + to be printed in between commits, in order for the graph history + to be drawn properly. ++ +This enables parent rewriting, see 'History Simplification' below. ++ +This implies the '--topo-order' option by default, but the +'--date-order' option may also be specified. + +ifdef::git-rev-list[] +--count:: + Print a number stating how many commits would have been + listed, and suppress all other output. When used together + with '--left-right', instead print the counts for left and + right commits, separated by a tab. When used together with + '--cherry-mark', omit patch equivalent commits from these + counts and print the count for equivalent commits separated + by a tab. +endif::git-rev-list[] + + +ifndef::git-rev-list[] +Diff Formatting +~~~~~~~~~~~~~~~ + +Below are listed options that control the formatting of diff output. +Some of them are specific to linkgit:git-rev-list[1], however other diff +options may be given. See linkgit:git-diff-files[1] for more options. + +-c:: + + With this option, diff output for a merge commit + shows the differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a parent + and the result one at a time. Furthermore, it lists only files + which were modified from all parents. + +--cc:: + + This flag implies the '-c' options and further compresses the + patch output by omitting uninteresting hunks whose contents in + the parents have only two variants and the merge result picks + one of them without modification. + +-m:: + + This flag makes the merge commits show the full diff like + regular commits; for each merge parent, a separate log entry + and diff is generated. An exception is that only diff against + the first parent is shown when '--first-parent' option is given; + in that case, the output represents the changes the merge + brought _into_ the then-current branch. + +-r:: + + Show recursive diffs. + +-t:: + + Show the tree objects in the diff output. This implies '-r'. + +-s:: + Suppress diff output. +endif::git-rev-list[] diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index fe846f043c..b290b617d4 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -1,132 +1,163 @@ SPECIFYING REVISIONS -------------------- -A revision parameter typically, but not necessarily, names a -commit object. They use what is called an 'extended SHA1' +A revision parameter '<rev>' typically, but not necessarily, names a +commit object. It uses what is called an 'extended SHA1' syntax. Here are various ways to spell object names. The -ones listed near the end of this list are to name trees and +ones listed near the end of this list name trees and blobs contained in a commit. -* The full SHA1 object name (40-byte hexadecimal string), or - a substring of such that is unique within the repository. +'<sha1>', e.g. 'dae86e1950b1277e545cee180551750029cfe735', 'dae86e':: + The full SHA1 object name (40-byte hexadecimal string), or + a leading substring that is unique within the repository. E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both - name the same commit object if there are no other object in + name the same commit object if there is no other object in your repository whose object name starts with dae86e. -* An output from 'git describe'; i.e. a closest tag, optionally +'<describeOutput>', e.g. 'v1.7.4.2-679-g3bee7fb':: + Output from `git describe`; i.e. a closest tag, optionally followed by a dash and a number of commits, followed by a dash, a - `g`, and an abbreviated object name. + 'g', and an abbreviated object name. -* A symbolic ref name. E.g. 'master' typically means the commit - object referenced by refs/heads/master. If you - happen to have both heads/master and tags/master, you can +'<refname>', e.g. 'master', 'heads/master', 'refs/heads/master':: + A symbolic ref name. E.g. 'master' typically means the commit + object referenced by 'refs/heads/master'. If you + happen to have both 'heads/master' and 'tags/master', you can explicitly say 'heads/master' to tell git which one you mean. - When ambiguous, a `<name>` is disambiguated by taking the + When ambiguous, a '<name>' is disambiguated by taking the first match in the following rules: - . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually - useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); + . If '$GIT_DIR/<name>' exists, that is what you mean (this is usually + useful only for 'HEAD', 'FETCH_HEAD', 'ORIG_HEAD', 'MERGE_HEAD' + and 'CHERRY_PICK_HEAD'); - . otherwise, `refs/<name>` if exists; + . otherwise, 'refs/<name>' if it exists; - . otherwise, `refs/tags/<name>` if exists; + . otherwise, 'refs/tags/<refname>' if it exists; - . otherwise, `refs/heads/<name>` if exists; + . otherwise, 'refs/heads/<name>' if it exists; - . otherwise, `refs/remotes/<name>` if exists; + . otherwise, 'refs/remotes/<name>' if it exists; - . otherwise, `refs/remotes/<name>/HEAD` if exists. + . otherwise, 'refs/remotes/<name>/HEAD' if it exists. + -HEAD names the commit your changes in the working tree is based on. -FETCH_HEAD records the branch you fetched from a remote repository -with your last 'git fetch' invocation. -ORIG_HEAD is created by commands that moves your HEAD in a drastic -way, to record the position of the HEAD before their operation, so that -you can change the tip of the branch back to the state before you ran -them easily. -MERGE_HEAD records the commit(s) you are merging into your branch -when you run 'git merge'. +'HEAD' names the commit on which you based the changes in the working tree. +'FETCH_HEAD' records the branch which you fetched from a remote repository +with your last `git fetch` invocation. +'ORIG_HEAD' is created by commands that move your 'HEAD' in a drastic +way, to record the position of the 'HEAD' before their operation, so that +you can easily change the tip of the branch back to the state before you ran +them. +'MERGE_HEAD' records the commit(s) which you are merging into your branch +when you run `git merge`. +'CHERRY_PICK_HEAD' records the commit which you are cherry-picking +when you run `git cherry-pick`. + -Note that any of the `refs/*` cases above may come either from -the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. +Note that any of the 'refs/*' cases above may come either from +the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. -* A ref followed by the suffix '@' with a date specification +'<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: + A ref followed by the suffix '@' with a date specification enclosed in a brace pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value + second ago\}' or '\{1979-02-26 18:30:00\}') specifies the value of the ref at a prior point in time. This suffix may only be used immediately following a ref name and the ref must have an - existing log ($GIT_DIR/logs/<ref>). Note that this looks up the state + existing log ('$GIT_DIR/logs/<ref>'). Note that this looks up the state of your *local* ref at a given time; e.g., what was in your local - `master` branch last week. If you want to look at commits made during - certain times, see `--since` and `--until`. + 'master' branch last week. If you want to look at commits made during + certain times, see '--since' and '--until'. -* A ref followed by the suffix '@' with an ordinal specification - enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify +'<refname>@\{<n>\}', e.g. 'master@\{1\}':: + A ref followed by the suffix '@' with an ordinal specification + enclosed in a brace pair (e.g. '\{1\}', '\{15\}') specifies the n-th prior value of that ref. For example 'master@\{1\}' is the immediate prior value of 'master' while 'master@\{5\}' is the 5th prior value of 'master'. This suffix may only be used immediately following a ref name and the ref must have an existing - log ($GIT_DIR/logs/<ref>). + log ('$GIT_DIR/logs/<refname>'). -* You can use the '@' construct with an empty ref part to get at a - reflog of the current branch. For example, if you are on the - branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. +'@\{<n>\}', e.g. '@\{1\}':: + You can use the '@' construct with an empty ref part to get at a + reflog entry of the current branch. For example, if you are on + branch 'blabla' then '@\{1\}' means the same as 'blabla@\{1\}'. -* The special construct '@\{-<n>\}' means the <n>th branch checked out +'@\{-<n>\}', e.g. '@\{-1\}':: + The construct '@\{-<n>\}' means the <n>th branch checked out before the current one. -* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to - the branch the ref is set to build on top of. Missing ref defaults +'<refname>@\{upstream\}', e.g. 'master@\{upstream\}', '@\{u\}':: + The suffix '@\{upstream\}' to a ref (short form '<refname>@\{u\}') refers to + the branch the ref is set to build on top of. A missing ref defaults to the current branch. -* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of +'<rev>{caret}', e.g. 'HEAD{caret}, v1.5.1{caret}0':: + A suffix '{caret}' to a revision parameter means the first parent of that commit object. '{caret}<n>' means the <n>th parent (i.e. - 'rev{caret}' - is equivalent to 'rev{caret}1'). As a special rule, - 'rev{caret}0' means the commit itself and is used when 'rev' is the + '<rev>{caret}' + is equivalent to '<rev>{caret}1'). As a special rule, + '<rev>{caret}0' means the commit itself and is used when '<rev>' is the object name of a tag object that refers to a commit object. -* A suffix '{tilde}<n>' to a revision parameter means the commit +'<rev>{tilde}<n>', e.g. 'master{tilde}3':: + A suffix '{tilde}<n>' to a revision parameter means the commit object that is the <n>th generation grand-parent of the named - commit object, following only the first parent. I.e. rev~3 is - equivalent to rev{caret}{caret}{caret} which is equivalent to - rev{caret}1{caret}1{caret}1. See below for a illustration of + commit object, following only the first parents. I.e. '<rev>{tilde}3' is + equivalent to '<rev>{caret}{caret}{caret}' which is equivalent to + '<rev>{caret}1{caret}1{caret}1'. See below for an illustration of the usage of this form. -* A suffix '{caret}' followed by an object type name enclosed in - brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object +'<rev>{caret}\{<type>\}', e.g. 'v0.99.8{caret}\{commit\}':: + A suffix '{caret}' followed by an object type name enclosed in + brace pair means the object could be a tag, and dereference the tag recursively until an object of that type is found or the object cannot be - dereferenced anymore (in which case, barf). `rev{caret}0` - introduced earlier is a short-hand for `rev{caret}\{commit\}`. + dereferenced anymore (in which case, barf). '<rev>{caret}0' + is a short-hand for '<rev>{caret}\{commit\}'. -* A suffix '{caret}' followed by an empty brace pair - (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, +'<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: + A suffix '{caret}' followed by an empty brace pair + means the object could be a tag, and dereference the tag recursively until a non-tag object is found. -* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names - a commit whose commit message starts with the specified text. +'<rev>{caret}\{/<text>\}', e.g. 'HEAD^{/fix nasty bug}':: + A suffix '{caret}' to a revision parameter, followed by a brace + pair that contains a text led by a slash, + is the same as the ':/fix nasty bug' syntax below except that + it returns the youngest matching commit which is reachable from + the '<rev>' before '{caret}'. + +':/<text>', e.g. ':/fix nasty bug':: + A colon, followed by a slash, followed by a text, names + a commit whose commit message matches the specified regular expression. This name returns the youngest matching commit which is reachable from any ref. If the commit message starts with a - '!', you have to repeat that; the special sequence ':/!', - followed by something else than '!' is reserved for now. + '!' you have to repeat that; the special sequence ':/!', + followed by something else than '!', is reserved for now. + The regular expression can match any part of the commit message. To + match messages starting with a string, one can use e.g. ':/^foo'. -* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree +'<rev>:<path>', e.g. 'HEAD:README', ':README', 'master:./README':: + A suffix ':' followed by a path names the blob or tree at the given path in the tree-ish object named by the part before the colon. - ':path' (with an empty part before the colon, e.g. `:README`) + ':path' (with an empty part before the colon) is a special case of the syntax described next: content recorded in the index at the given path. - -* A colon, optionally followed by a stage number (0 to 3) and a - colon, followed by a path (e.g. `:0:README`); this names a blob object in the - index at the given path. Missing stage number (and the colon - that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage + A path starting with './' or '../' is relative to the current working directory. + The given path will be converted to be relative to the working tree's root directory. + This is most useful to address a blob or tree from a commit or tree that has + the same tree structure as the working tree. + +':<n>:<path>', e.g. ':0:README', ':README':: + A colon, optionally followed by a stage number (0 to 3) and a + colon, followed by a path, names a blob object in the + index at the given path. A missing stage number (and the colon + that follows it) names a stage 0 entry. During a merge, stage 1 is the common ancestor, stage 2 is the target branch's version (typically the current branch), and stage 3 is the version from - the branch being merged. + the branch which is being merged. Here is an illustration, by Jon Loeliger. Both commit nodes B and C are parents of commit node A. Parent commits are ordered @@ -160,31 +191,31 @@ G H I J SPECIFYING RANGES ----------------- -History traversing commands such as 'git log' operate on a set +History traversing commands such as `git log` operate on a set of commits, not just a single commit. To these commands, specifying a single revision with the notation described in the previous section means the set of commits reachable from that commit, following the commit ancestry chain. -To exclude commits reachable from a commit, a prefix `{caret}` -notation is used. E.g. `{caret}r1 r2` means commits reachable -from `r2` but exclude the ones reachable from `r1`. +To exclude commits reachable from a commit, a prefix '{caret}' +notation is used. E.g. '{caret}r1 r2' means commits reachable +from 'r2' but exclude the ones reachable from 'r1'. This set operation appears so often that there is a shorthand -for it. When you have two commits `r1` and `r2` (named according +for it. When you have two commits 'r1' and 'r2' (named according to the syntax explained in SPECIFYING REVISIONS above), you can ask for commits that are reachable from r2 excluding those that are reachable -from r1 by `{caret}r1 r2` and it can be written as `r1..r2`. +from r1 by '{caret}r1 r2' and it can be written as 'r1..r2'. -A similar notation `r1\...r2` is called symmetric difference -of `r1` and `r2` and is defined as -`r1 r2 --not $(git merge-base --all r1 r2)`. +A similar notation 'r1\...r2' is called symmetric difference +of 'r1' and 'r2' and is defined as +'r1 r2 --not $(git merge-base --all r1 r2)'. It is the set of commits that are reachable from either one of -`r1` or `r2` but not from both. +'r1' or 'r2' but not from both. Two other shorthands for naming a set that is formed by a commit -and its parent commits exist. The `r1{caret}@` notation means all -parents of `r1`. `r1{caret}!` includes commit `r1` but excludes +and its parent commits exist. The 'r1{caret}@' notation means all +parents of 'r1'. 'r1{caret}!' includes commit 'r1' but excludes all of its parents. Here are a handful of examples: diff --git a/Documentation/sequencer.txt b/Documentation/sequencer.txt new file mode 100644 index 0000000000..5747f442f2 --- /dev/null +++ b/Documentation/sequencer.txt @@ -0,0 +1,12 @@ +--continue:: + Continue the operation in progress using the information in + '.git/sequencer'. Can be used to continue after resolving + conflicts in a failed cherry-pick or revert. + +--quit:: + Forget about the current operation in progress. Can be used + to clear the sequencer state after a failed cherry-pick or + revert. + +--abort:: + Cancel the operation and return to the pre-sequence state. diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt new file mode 100644 index 0000000000..49b3d52952 --- /dev/null +++ b/Documentation/technical/api-argv-array.txt @@ -0,0 +1,46 @@ +argv-array API +============== + +The argv-array API allows one to dynamically build and store +NULL-terminated lists. An argv-array maintains the invariant that the +`argv` member always points to a non-NULL array, and that the array is +always NULL-terminated at the element pointed to by `argv[argc]`. This +makes the result suitable for passing to functions expecting to receive +argv from main(), or the link:api-run-command.html[run-command API]. + +The link:api-string-list.html[string-list API] is similar, but cannot be +used for these purposes; instead of storing a straight string pointer, +it contains an item structure with a `util` field that is not compatible +with the traditional argv interface. + +Each `argv_array` manages its own memory. Any strings pushed into the +array are duplicated, and all memory is freed by argv_array_clear(). + +Data Structures +--------------- + +`struct argv_array`:: + + A single array. This should be initialized by assignment from + `ARGV_ARRAY_INIT`, or by calling `argv_array_init`. The `argv` + member contains the actual array; the `argc` member contains the + number of elements in the array, not including the terminating + NULL. + +Functions +--------- + +`argv_array_init`:: + Initialize an array. This is no different than assigning from + `ARGV_ARRAY_INIT`. + +`argv_array_push`:: + Push a copy of a string onto the end of the array. + +`argv_array_pushf`:: + Format a string and push it onto the end of the array. This is a + convenience wrapper combining `strbuf_addf` and `argv_array_push`. + +`argv_array_clear`:: + Free all memory associated with the array and return it to the + initial, empty state. diff --git a/Documentation/technical/api-builtin.txt b/Documentation/technical/api-builtin.txt index 5cb2b0590a..b0cafe87be 100644 --- a/Documentation/technical/api-builtin.txt +++ b/Documentation/technical/api-builtin.txt @@ -49,6 +49,8 @@ Additionally, if `foo` is a new command, there are 3 more things to do: . Add an entry for `git-foo` to `command-list.txt`. +. Add an entry for `/git-foo` to `.gitignore`. + How a built-in is called ------------------------ diff --git a/Documentation/technical/api-diff.txt b/Documentation/technical/api-diff.txt index 20b0241d30..2d2ebc04b7 100644 --- a/Documentation/technical/api-diff.txt +++ b/Documentation/technical/api-diff.txt @@ -32,7 +32,7 @@ Calling sequence * As you find different pairs of files, call `diff_change()` to feed modified files, `diff_addremove()` to feed created or deleted files, - or `diff_unmerged()` to feed a file whose state is 'unmerged' to the + or `diff_unmerge()` to feed a file whose state is 'unmerged' to the API. These are thin wrappers to a lower-level `diff_queue()` function that is flexible enough to record any of these kinds of changes. @@ -50,7 +50,7 @@ Data structures This is the internal representation for a single file (blob). It records the blob object name (if known -- for a work tree file it typically is a NUL SHA-1), filemode and pathname. This is what the -`diff_addremove()`, `diff_change()` and `diff_unmerged()` synthesize and +`diff_addremove()`, `diff_change()` and `diff_unmerge()` synthesize and feed `diff_queue()` function with. * `struct diff_filepair` diff --git a/Documentation/technical/api-gitattributes.txt b/Documentation/technical/api-gitattributes.txt index 9d97eaa9de..ce363b6305 100644 --- a/Documentation/technical/api-gitattributes.txt +++ b/Documentation/technical/api-gitattributes.txt @@ -11,27 +11,15 @@ Data Structure `struct git_attr`:: An attribute is an opaque object that is identified by its name. - Pass the name and its length to `git_attr()` function to obtain - the object of this type. The internal representation of this - structure is of no interest to the calling programs. + Pass the name to `git_attr()` function to obtain the object of + this type. The internal representation of this structure is + of no interest to the calling programs. The name of the + attribute can be retrieved by calling `git_attr_name()`. `struct git_attr_check`:: This structure represents a set of attributes to check in a call - to `git_checkattr()` function, and receives the results. - - -Calling Sequence ----------------- - -* Prepare an array of `struct git_attr_check` to define the list of - attributes you would want to check. To populate this array, you would - need to define necessary attributes by calling `git_attr()` function. - -* Call git_checkattr() to check the attributes for the path. - -* Inspect `git_attr_check` structure to see how each of the attribute in - the array is defined for the path. + to `git_check_attr()` function, and receives the results. Attribute Values @@ -57,6 +45,19 @@ If none of the above returns true, `.value` member points at a string value of the attribute for the path. +Querying Specific Attributes +---------------------------- + +* Prepare an array of `struct git_attr_check` to define the list of + attributes you would want to check. To populate this array, you would + need to define necessary attributes by calling `git_attr()` function. + +* Call `git_check_attr()` to check the attributes for the path. + +* Inspect `git_attr_check` structure to see how each of the attribute in + the array is defined for the path. + + Example ------- @@ -72,18 +73,18 @@ static void setup_check(void) { if (check[0].attr) return; /* already done */ - check[0].attr = git_attr("crlf", 4); - check[1].attr = git_attr("ident", 5); + check[0].attr = git_attr("crlf"); + check[1].attr = git_attr("ident"); } ------------ -. Call `git_checkattr()` with the prepared array of `struct git_attr_check`: +. Call `git_check_attr()` with the prepared array of `struct git_attr_check`: ------------ const char *path; setup_check(); - git_checkattr(path, ARRAY_SIZE(check), check); + git_check_attr(path, ARRAY_SIZE(check), check); ------------ . Act on `.value` member of the result, left in `check[]`: @@ -108,4 +109,20 @@ static void setup_check(void) } ------------ -(JC) + +Querying All Attributes +----------------------- + +To get the values of all attributes associated with a file: + +* Call `git_all_attrs()`, which returns an array of `git_attr_check` + structures. + +* Iterate over the `git_attr_check` array to examine the attribute + names and values. The name of the attribute described by a + `git_attr_check` object can be retrieved via + `git_attr_name(check[i].attr)`. (Please note that no items will be + returned for unset attributes, so `ATTR_UNSET()` will return false + for all returned `git_array_check` objects.) + +* Free the `git_array_check` array. diff --git a/Documentation/technical/api-merge.txt b/Documentation/technical/api-merge.txt index a7e050bb7a..9dc1bed768 100644 --- a/Documentation/technical/api-merge.txt +++ b/Documentation/technical/api-merge.txt @@ -17,6 +17,40 @@ responsible for a few things. path-specific merge drivers (specified in `.gitattributes`) into account. +Data structures +--------------- + +* `mmbuffer_t`, `mmfile_t` + +These store data usable for use by the xdiff backend, for writing and +for reading, respectively. See `xdiff/xdiff.h` for the definitions +and `diff.c` for examples. + +* `struct ll_merge_options` + +This describes the set of options the calling program wants to affect +the operation of a low-level (single file) merge. Some options: + +`virtual_ancestor`:: + Behave as though this were part of a merge between common + ancestors in a recursive merge. + If a helper program is specified by the + `[merge "<driver>"] recursive` configuration, it will + be used (see linkgit:gitattributes[5]). + +`variant`:: + Resolve local conflicts automatically in favor + of one side or the other (as in 'git merge-file' + `--ours`/`--theirs`/`--union`). Can be `0`, + `XDL_MERGE_FAVOR_OURS`, `XDL_MERGE_FAVOR_THEIRS`, or + `XDL_MERGE_FAVOR_UNION`. + +`renormalize`:: + Resmudge and clean the "base", "theirs" and "ours" files + before merging. Use this when the merge is likely to have + overlapped with a change in smudge/clean or end-of-line + normalization rules. + Low-level (single file) merge ----------------------------- @@ -28,15 +62,24 @@ Low-level (single file) merge `.git/info/attributes` into account. Returns 0 for a clean merge. -The caller: +Calling sequence: -1. allocates an mmbuffer_t variable for the result; -2. allocates and fills variables with the file's original content - and two modified versions (using `read_mmfile`, for example); -3. calls ll_merge(); -4. reads the output from result_buf.ptr and result_buf.size; -5. releases buffers when finished (free(ancestor.ptr); free(ours.ptr); - free(theirs.ptr); free(result_buf.ptr);). +* Prepare a `struct ll_merge_options` to record options. + If you have no special requests, skip this and pass `NULL` + as the `opts` parameter to use the default options. + +* Allocate an mmbuffer_t variable for the result. + +* Allocate and fill variables with the file's original content + and two modified versions (using `read_mmfile`, for example). + +* Call `ll_merge()`. + +* Read the merged content from `result_buf.ptr` and `result_buf.size`. + +* Release buffers when finished. A simple + `free(ancestor.ptr); free(ours.ptr); free(theirs.ptr); + free(result_buf.ptr);` will do. If the modifications do not merge cleanly, `ll_merge` will return a nonzero value and `result_buf` will generally include a description of @@ -47,18 +90,6 @@ The `ancestor_label`, `our_label`, and `their_label` parameters are used to label the different sides of a conflict if the merge driver supports this. -The `flag` parameter is a bitfield: - - - The `LL_OPT_VIRTUAL_ANCESTOR` bit indicates whether this is an - internal merge to consolidate ancestors for a recursive merge. - - - The `LL_OPT_FAVOR_MASK` bits allow local conflicts to be automatically - resolved in favor of one side or the other (as in 'git merge-file' - `--ours`/`--theirs`/`--union`). - They can be populated by `create_ll_flag`, whose argument can be - `XDL_MERGE_FAVOR_OURS`, `XDL_MERGE_FAVOR_THEIRS`, or - `XDL_MERGE_FAVOR_UNION`. - Everything else --------------- diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index c5d141cd63..4b92514f60 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -118,13 +118,16 @@ There are some macros to easily define options: `OPT__COLOR(&int_var, description)`:: Add `\--color[=<when>]` and `--no-color`. -`OPT__DRY_RUN(&int_var)`:: +`OPT__DRY_RUN(&int_var, description)`:: Add `-n, \--dry-run`. -`OPT__QUIET(&int_var)`:: +`OPT__FORCE(&int_var, description)`:: + Add `-f, \--force`. + +`OPT__QUIET(&int_var, description)`:: Add `-q, \--quiet`. -`OPT__VERBOSE(&int_var)`:: +`OPT__VERBOSE(&int_var, description)`:: Add `-v, \--verbose`. `OPT_GROUP(description)`:: @@ -132,9 +135,14 @@ There are some macros to easily define options: describes the group or an empty string. Start the description with an upper-case letter. -`OPT_BOOLEAN(short, long, &int_var, description)`:: - Introduce a boolean option. - `int_var` is incremented on each use. +`OPT_BOOL(short, long, &int_var, description)`:: + Introduce a boolean option. `int_var` is set to one with + `--option` and set to zero with `--no-option`. + +`OPT_COUNTUP(short, long, &int_var, description)`:: + Introduce a count-up option. + `int_var` is incremented on each use of `--option`, and + reset to zero with `--no-option`. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. @@ -145,8 +153,9 @@ There are some macros to easily define options: If used, `int_var` is bitwise-anded with the inverted `mask`. `OPT_SET_INT(short, long, &int_var, description, integer)`:: - Introduce a boolean option. - If used, set `int_var` to `integer`. + Introduce an integer option. + `int_var` is set to `integer` with `--option`, and + reset to zero with `--no-option`. `OPT_SET_PTR(short, long, &ptr_var, description, ptr)`:: Introduce a boolean option. @@ -195,6 +204,11 @@ There are some macros to easily define options: "auto", set `int_var` to 1 if stdout is a tty or a pager, 0 otherwise. +`OPT_NOOP_NOARG(short, long)`:: + Introduce an option that has no effect and takes no arguments. + Use it to hide deprecated options that are still to be recognized + and ignored silently. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-ref-iteration.txt b/Documentation/technical/api-ref-iteration.txt new file mode 100644 index 0000000000..dbbea95db7 --- /dev/null +++ b/Documentation/technical/api-ref-iteration.txt @@ -0,0 +1,81 @@ +ref iteration API +================= + + +Iteration of refs is done by using an iterate function which will call a +callback function for every ref. The callback function has this +signature: + + int handle_one_ref(const char *refname, const unsigned char *sha1, + int flags, void *cb_data); + +There are different kinds of iterate functions which all take a +callback of this type. The callback is then called for each found ref +until the callback returns nonzero. The returned value is then also +returned by the iterate function. + +Iteration functions +------------------- + +* `head_ref()` just iterates the head ref. + +* `for_each_ref()` iterates all refs. + +* `for_each_ref_in()` iterates all refs which have a defined prefix and + strips that prefix from the passed variable refname. + +* `for_each_tag_ref()`, `for_each_branch_ref()`, `for_each_remote_ref()`, + `for_each_replace_ref()` iterate refs from the respective area. + +* `for_each_glob_ref()` iterates all refs that match the specified glob + pattern. + +* `for_each_glob_ref_in()` the previous and `for_each_ref_in()` combined. + +* `head_ref_submodule()`, `for_each_ref_submodule()`, + `for_each_ref_in_submodule()`, `for_each_tag_ref_submodule()`, + `for_each_branch_ref_submodule()`, `for_each_remote_ref_submodule()` + do the same as the functions descibed above but for a specified + submodule. + +* `for_each_rawref()` can be used to learn about broken ref and symref. + +* `for_each_reflog()` iterates each reflog file. + +Submodules +---------- + +If you want to iterate the refs of a submodule you first need to add the +submodules object database. You can do this by a code-snippet like +this: + + const char *path = "path/to/submodule" + if (!add_submodule_odb(path)) + die("Error submodule '%s' not populated.", path); + +`add_submodule_odb()` will return an non-zero value on success. If you +do not do this you will get an error for each ref that it does not point +to a valid object. + +Note: As a side-effect of this you can not safely assume that all +objects you lookup are available in superproject. All submodule objects +will be available the same way as the superprojects objects. + +Example: +-------- + +---- +static int handle_remote_ref(const char *refname, + const unsigned char *sha1, int flags, void *cb_data) +{ + struct strbuf *output = cb_data; + strbuf_addf(output, "%s\n", refname); + return 0; +} + +... + + struct strbuf output = STRBUF_INIT; + for_each_remote_ref(handle_remote_ref, &output); + printf("%s", output.buf); +---- diff --git a/Documentation/technical/api-sha1-array.txt b/Documentation/technical/api-sha1-array.txt new file mode 100644 index 0000000000..4a4bae8109 --- /dev/null +++ b/Documentation/technical/api-sha1-array.txt @@ -0,0 +1,79 @@ +sha1-array API +============== + +The sha1-array API provides storage and manipulation of sets of SHA1 +identifiers. The emphasis is on storage and processing efficiency, +making them suitable for large lists. Note that the ordering of items is +not preserved over some operations. + +Data Structures +--------------- + +`struct sha1_array`:: + + A single array of SHA1 hashes. This should be initialized by + assignment from `SHA1_ARRAY_INIT`. The `sha1` member contains + the actual data. The `nr` member contains the number of items in + the set. The `alloc` and `sorted` members are used internally, + and should not be needed by API callers. + +Functions +--------- + +`sha1_array_append`:: + Add an item to the set. The sha1 will be placed at the end of + the array (but note that some operations below may lose this + ordering). + +`sha1_array_sort`:: + Sort the elements in the array. + +`sha1_array_lookup`:: + Perform a binary search of the array for a specific sha1. + If found, returns the offset (in number of elements) of the + sha1. If not found, returns a negative integer. If the array is + not sorted, this function has the side effect of sorting it. + +`sha1_array_clear`:: + Free all memory associated with the array and return it to the + initial, empty state. + +`sha1_array_for_each_unique`:: + Efficiently iterate over each unique element of the list, + executing the callback function for each one. If the array is + not sorted, this function has the side effect of sorting it. + +Examples +-------- + +----------------------------------------- +void print_callback(const unsigned char sha1[20], + void *data) +{ + printf("%s\n", sha1_to_hex(sha1)); +} + +void some_func(void) +{ + struct sha1_array hashes = SHA1_ARRAY_INIT; + unsigned char sha1[20]; + + /* Read objects into our set */ + while (read_object_from_stdin(sha1)) + sha1_array_append(&hashes, sha1); + + /* Check if some objects are in our set */ + while (read_object_from_stdin(sha1)) { + if (sha1_array_lookup(&hashes, sha1) >= 0) + printf("it's in there!\n"); + + /* + * Print the unique set of objects. We could also have + * avoided adding duplicate objects in the first place, + * but we would end up re-sorting the array repeatedly. + * Instead, this will sort once and then skip duplicates + * in linear time. + */ + sha1_array_for_each_unique(&hashes, print_callback, NULL); +} +----------------------------------------- diff --git a/Documentation/technical/api-sigchain.txt b/Documentation/technical/api-sigchain.txt new file mode 100644 index 0000000000..9e1189ef01 --- /dev/null +++ b/Documentation/technical/api-sigchain.txt @@ -0,0 +1,41 @@ +sigchain API +============ + +Code often wants to set a signal handler to clean up temporary files or +other work-in-progress when we die unexpectedly. For multiple pieces of +code to do this without conflicting, each piece of code must remember +the old value of the handler and restore it either when: + + 1. The work-in-progress is finished, and the handler is no longer + necessary. The handler should revert to the original behavior + (either another handler, SIG_DFL, or SIG_IGN). + + 2. The signal is received. We should then do our cleanup, then chain + to the next handler (or die if it is SIG_DFL). + +Sigchain is a tiny library for keeping a stack of handlers. Your handler +and installation code should look something like: + +------------------------------------------ + void clean_foo_on_signal(int sig) + { + clean_foo(); + sigchain_pop(sig); + raise(sig); + } + + void other_func() + { + sigchain_push_common(clean_foo_on_signal); + mess_up_foo(); + clean_foo(); + } +------------------------------------------ + +Handlers are given the typedef of sigchain_fun. This is the same type +that is given to signal() or sigaction(). It is perfectly reasonable to +push SIG_DFL or SIG_IGN onto the stack. + +You can sigchain_push and sigchain_pop individual signals. For +convenience, sigchain_push_common will push the handler onto the stack +for many common signals. diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt index 3f575bdcff..ce24eb96f5 100644 --- a/Documentation/technical/api-string-list.txt +++ b/Documentation/technical/api-string-list.txt @@ -29,6 +29,9 @@ member (you need this if you add things later) and you should set the . Can sort an unsorted list using `sort_string_list`. +. Can remove individual items of an unsorted list using + `unsorted_string_list_delete_item`. + . Finally it should free the list using `string_list_clear`. Example: @@ -112,6 +115,13 @@ write `string_list_insert(...)->util = ...;`. The above two functions need to look through all items, as opposed to their counterpart for sorted lists, which performs a binary search. +`unsorted_string_list_delete_item`:: + + Remove an item from a string_list. The `string` pointer of the items + will be freed in case the `strdup_strings` member of the string_list + is set. The third parameter controls if the `util` pointer of the + items should be freed or not. + Data structures --------------- diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt new file mode 100644 index 0000000000..8930b3fabc --- /dev/null +++ b/Documentation/technical/index-format.txt @@ -0,0 +1,186 @@ +GIT index format +================ + += The git index file has the following format + + All binary numbers are in network byte order. Version 2 is described + here unless stated otherwise. + + - A 12-byte header consisting of + + 4-byte signature: + The signature is { 'D', 'I', 'R', 'C' } (stands for "dircache") + + 4-byte version number: + The current supported versions are 2 and 3. + + 32-bit number of index entries. + + - A number of sorted index entries (see below). + + - Extensions + + Extensions are identified by signature. Optional extensions can + be ignored if GIT does not understand them. + + GIT currently supports cached tree and resolve undo extensions. + + 4-byte extension signature. If the first byte is 'A'..'Z' the + extension is optional and can be ignored. + + 32-bit size of the extension + + Extension data + + - 160-bit SHA-1 over the content of the index file before this + checksum. + +== Index entry + + Index entries are sorted in ascending order on the name field, + interpreted as a string of unsigned bytes (i.e. memcmp() order, no + localization, no special casing of directory separator '/'). Entries + with the same name are sorted by their stage field. + + 32-bit ctime seconds, the last time a file's metadata changed + this is stat(2) data + + 32-bit ctime nanosecond fractions + this is stat(2) data + + 32-bit mtime seconds, the last time a file's data changed + this is stat(2) data + + 32-bit mtime nanosecond fractions + this is stat(2) data + + 32-bit dev + this is stat(2) data + + 32-bit ino + this is stat(2) data + + 32-bit mode, split into (high to low bits) + + 4-bit object type + valid values in binary are 1000 (regular file), 1010 (symbolic link) + and 1110 (gitlink) + + 3-bit unused + + 9-bit unix permission. Only 0755 and 0644 are valid for regular files. + Symbolic links and gitlinks have value 0 in this field. + + 32-bit uid + this is stat(2) data + + 32-bit gid + this is stat(2) data + + 32-bit file size + This is the on-disk size from stat(2), truncated to 32-bit. + + 160-bit SHA-1 for the represented object + + A 16-bit 'flags' field split into (high to low bits) + + 1-bit assume-valid flag + + 1-bit extended flag (must be zero in version 2) + + 2-bit stage (during merge) + + 12-bit name length if the length is less than 0xFFF; otherwise 0xFFF + is stored in this field. + + (Version 3) A 16-bit field, only applicable if the "extended flag" + above is 1, split into (high to low bits). + + 1-bit reserved for future + + 1-bit skip-worktree flag (used by sparse checkout) + + 1-bit intent-to-add flag (used by "git add -N") + + 13-bit unused, must be zero + + Entry path name (variable length) relative to top level directory + (without leading slash). '/' is used as path separator. The special + path components ".", ".." and ".git" (without quotes) are disallowed. + Trailing slash is also disallowed. + + The exact encoding is undefined, but the '.' and '/' characters + are encoded in 7-bit ASCII and the encoding cannot contain a NUL + byte (iow, this is a UNIX pathname). + + 1-8 nul bytes as necessary to pad the entry to a multiple of eight bytes + while keeping the name NUL-terminated. + +== Extensions + +=== Cached tree + + Cached tree extension contains pre-computed hashes for trees that can + be derived from the index. It helps speed up tree object generation + from index for a new commit. + + When a path is updated in index, the path must be invalidated and + removed from tree cache. + + The signature for this extension is { 'T', 'R', 'E', 'E' }. + + A series of entries fill the entire extension; each of which + consists of: + + - NUL-terminated path component (relative to its parent directory); + + - ASCII decimal number of entries in the index that is covered by the + tree this entry represents (entry_count); + + - A space (ASCII 32); + + - ASCII decimal number that represents the number of subtrees this + tree has; + + - A newline (ASCII 10); and + + - 160-bit object name for the object that would result from writing + this span of index as a tree. + + An entry can be in an invalidated state and is represented by having + -1 in the entry_count field. In this case, there is no object name + and the next entry starts immediately after the newline. + + The entries are written out in the top-down, depth-first order. The + first entry represents the root level of the repository, followed by the + first subtree---let's call this A---of the root level (with its name + relative to the root level), followed by the first subtree of A (with + its name relative to A), ... + +=== Resolve undo + + A conflict is represented in the index as a set of higher stage entries. + When a conflict is resolved (e.g. with "git add path"), these higher + stage entries will be removed and a stage-0 entry with proper resoluton + is added. + + When these higher stage entries are removed, they are saved in the + resolve undo extension, so that conflicts can be recreated (e.g. with + "git checkout -m"), in case users want to redo a conflict resolution + from scratch. + + The signature for this extension is { 'R', 'E', 'U', 'C' }. + + A series of entries fill the entire extension; each of which + consists of: + + - NUL-terminated pathname the entry describes (relative to the root of + the repository, i.e. full pathname); + + - Three NUL-terminated ASCII octal numbers, entry mode of entries in + stage 1 to 3 (a missing stage is represented by "0" in this field); + and + + - At most three 160-bit object names of the entry in stages from 1 to 3 + (nothing is written for a missing stage). + diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 369f91d3b9..546980c0a4 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -60,6 +60,13 @@ process on the server side over the Git protocol is this: "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | nc -v example.com 9418 +If the server refuses the request for some reasons, it could abort +gracefully with an error message. + +---- + error-line = PKT-LINE("ERR" SP explanation-text) +---- + SSH Transport ------------- @@ -179,34 +186,36 @@ and descriptions. Packfile Negotiation -------------------- -After reference and capabilities discovery, the client can decide -to terminate the connection by sending a flush-pkt, telling the -server it can now gracefully terminate (as happens with the ls-remote -command) or it can enter the negotiation phase, where the client and -server determine what the minimal packfile necessary for transport is. - -Once the client has the initial list of references that the server -has, as well as the list of capabilities, it will begin telling the -server what objects it wants and what objects it has, so the server -can make a packfile that only contains the objects that the client needs. -The client will also send a list of the capabilities it wants to be in -effect, out of what the server said it could do with the first 'want' line. +After reference and capabilities discovery, the client can decide to +terminate the connection by sending a flush-pkt, telling the server it can +now gracefully terminate, and disconnect, when it does not need any pack +data. This can happen with the ls-remote command, and also can happen when +the client already is up-to-date. + +Otherwise, it enters the negotiation phase, where the client and +server determine what the minimal packfile necessary for transport is, +by telling the server what objects it wants, its shallow objects +(if any), and the maximum commit depth it wants (if any). The client +will also send a list of the capabilities it wants to be in effect, +out of what the server said it could do with the first 'want' line. ---- upload-request = want-list - have-list - compute-end + *shallow-line + *1depth-request + flush-pkt want-list = first-want *additional-want - flush-pkt + + shallow-line = PKT_LINE("shallow" SP obj-id) + + depth-request = PKT_LINE("deepen" SP depth) first-want = PKT-LINE("want" SP obj-id SP capability-list LF) additional-want = PKT-LINE("want" SP obj-id LF) - have-list = *have-line - have-line = PKT-LINE("have" SP obj-id LF) - compute-end = flush-pkt / PKT-LINE("done") + depth = 1*DIGIT ---- Clients MUST send all the obj-ids it wants from the reference @@ -215,21 +224,64 @@ discovery phase as 'want' lines. Clients MUST send at least one obj-id in a 'want' command which did not appear in the response obtained through ref discovery. -If client is requesting a shallow clone, it will now send a 'deepen' -line with the depth it is requesting. +The client MUST write all obj-ids which it only has shallow copies +of (meaning that it does not have the parents of a commit) as +'shallow' lines so that the server is aware of the limitations of +the client's history. Clients MUST NOT mention an obj-id which +it does not know exists on the server. + +The client now sends the maximum commit history depth it wants for +this transaction, which is the number of commits it wants from the +tip of the history, if any, as a 'deepen' line. A depth of 0 is the +same as not making a depth request. The client does not want to receive +any commits beyond this depth, nor objects needed only to complete +those commits. Commits whose parents are not received as a result are +defined as shallow and marked as such in the server. This information +is sent back to the client in the next step. + +Once all the 'want's and 'shallow's (and optional 'deepen') are +transferred, clients MUST send a flush-pkt, to tell the server side +that it is done sending the list. + +Otherwise, if the client sent a positive depth request, the server +will determine which commits will and will not be shallow and +send this information to the client. If the client did not request +a positive depth, this step is skipped. -Once all the "want"s (and optional 'deepen') are transferred, -clients MUST send a flush-pkt. If the client has all the references -on the server, client flushes and disconnects. +---- + shallow-update = *shallow-line + *unshallow-line + flush-pkt + + shallow-line = PKT-LINE("shallow" SP obj-id) + + unshallow-line = PKT-LINE("unshallow" SP obj-id) +---- -TODO: shallow/unshallow response and document the deepen command in the ABNF. +If the client has requested a positive depth, the server will compute +the set of commits which are no deeper than the desired depth, starting +at the client's wants. The server writes 'shallow' lines for each +commit whose parents will not be sent as a result. The server writes +an 'unshallow' line for each commit which the client has indicated is +shallow, but is no longer shallow at the currently requested depth +(that is, its parents will now be sent). The server MUST NOT mark +as unshallow anything which the client has not indicated was shallow. Now the client will send a list of the obj-ids it has using 'have' -lines. In multi_ack mode, the canonical implementation will send up -to 32 of these at a time, then will send a flush-pkt. The canonical -implementation will skip ahead and send the next 32 immediately, -so that there is always a block of 32 "in-flight on the wire" at a -time. +lines, so the server can make a packfile that only contains the objects +that the client needs. In multi_ack mode, the canonical implementation +will send up to 32 of these at a time, then will send a flush-pkt. The +canonical implementation will skip ahead and send the next 32 immediately, +so that there is always a block of 32 "in-flight on the wire" at a time. + +---- + upload-haves = have-list + compute-end + + have-list = *have-line + have-line = PKT-LINE("have" SP obj-id LF) + compute-end = flush-pkt / PKT-LINE("done") +---- If the server reads 'have' lines, it then will respond by ACKing any of the obj-ids the client said it had that the server also has. The diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index fecc4eb5b3..f13a846131 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -344,7 +344,8 @@ Examining branches from a remote repository The "master" branch that was created at the time you cloned is a copy of the HEAD in the repository that you cloned from. That repository may also have had other branches, though, and your local repository -keeps branches which track each of those remote branches, which you +keeps branches which track each of those remote branches, called +remote-tracking branches, which you can view using the "-r" option to linkgit:git-branch[1]: ------------------------------------------------ @@ -359,13 +360,23 @@ $ git branch -r origin/todo ------------------------------------------------ -You cannot check out these remote-tracking branches, but you can -examine them on a branch of your own, just as you would a tag: +In this example, "origin" is called a remote repository, or "remote" +for short. The branches of this repository are called "remote +branches" from our point of view. The remote-tracking branches listed +above were created based on the remote branches at clone time and will +be updated by "git fetch" (hence "git pull") and "git push". See +<<Updating-a-repository-With-git-fetch>> for details. + +You might want to build on one of these remote-tracking branches +on a branch of your own, just as you would for a tag: ------------------------------------------------ $ git checkout -b my-todo-copy origin/todo ------------------------------------------------ +You can also check out "origin/todo" directly to examine it or +write a one-off patch. See <<detached-head,detached head>>. + Note that the name "origin" is just the name that git uses by default to refer to the repository that you cloned from. @@ -397,7 +408,7 @@ is usually a shortcut for the HEAD branch in the repository "origin". For the complete list of paths which git checks for references, and the order it uses to decide which to choose when there are multiple references with the same shorthand name, see the "SPECIFYING -REVISIONS" section of linkgit:gitrevisions[1]. +REVISIONS" section of linkgit:gitrevisions[7]. [[Updating-a-repository-With-git-fetch]] Updating a repository with git fetch @@ -435,7 +446,7 @@ linux-nfs/master origin/master ------------------------------------------------- -If you run "git fetch <remote>" later, the tracking branches for the +If you run "git fetch <remote>" later, the remote-tracking branches for the named <remote> will be updated. If you examine the file .git/config, you will see that git has added @@ -568,7 +579,7 @@ We have seen several ways of naming commits already: - HEAD: refers to the head of the current branch There are many more; see the "SPECIFYING REVISIONS" section of the -linkgit:gitrevisions[1] man page for the complete list of ways to +linkgit:gitrevisions[7] man page for the complete list of ways to name revisions. Some examples: ------------------------------------------------- @@ -909,7 +920,7 @@ commits reachable from some head but not from any tag in the repository: $ gitk $( git show-ref --heads ) --not $( git show-ref --tags ) ------------------------------------------------- -(See linkgit:gitrevisions[1] for explanations of commit-selecting +(See linkgit:gitrevisions[7] for explanations of commit-selecting syntax such as `--not`.) [[making-a-release]] @@ -955,7 +966,7 @@ echo "git diff --stat --summary -M v$last v$new > ../diffstat-$new" and then he just cut-and-pastes the output commands after verifying that they look OK. -[[Finding-comments-With-given-Content]] +[[Finding-commits-With-given-Content]] Finding commits referencing a file with given content ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1635,7 +1646,7 @@ you've checked out. The reflogs are kept by default for 30 days, after which they may be pruned. See linkgit:git-reflog[1] and linkgit:git-gc[1] to learn how to control this pruning, and see the "SPECIFYING REVISIONS" -section of linkgit:gitrevisions[1] for details. +section of linkgit:gitrevisions[7] for details. Note that the reflog history is very different from normal git history. While normal history is shared by every repository that works on the @@ -1700,7 +1711,7 @@ may wish to check the original repository for updates and merge them into your own work. We have already seen <<Updating-a-repository-With-git-fetch,how to -keep remote tracking branches up to date>> with linkgit:git-fetch[1], +keep remote-tracking branches up to date>> with linkgit:git-fetch[1], and how to merge two branches. So you can merge in changes from the original repository's master branch with: @@ -1716,15 +1727,21 @@ one step: $ git pull origin master ------------------------------------------------- -In fact, if you have "master" checked out, then by default "git pull" -merges from the HEAD branch of the origin repository. So often you can +In fact, if you have "master" checked out, then this branch has been +configured by "git clone" to get changes from the HEAD branch of the +origin repository. So often you can accomplish the above with just a simple ------------------------------------------------- $ git pull ------------------------------------------------- -More generally, a branch that is created from a remote branch will pull +This command will fetch changes from the remote branches to your +remote-tracking branches `origin/*`, and merge the default branch into +the current branch. + +More generally, a branch that is created from a remote-tracking branch +will pull by default from that branch. See the descriptions of the branch.<name>.remote and branch.<name>.merge options in linkgit:git-config[1], and the discussion of the `--track` option in @@ -2106,7 +2123,7 @@ $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git $ cd work ------------------------------------------------- -Linus's tree will be stored in the remote branch named origin/master, +Linus's tree will be stored in the remote-tracking branch named origin/master, and can be updated using linkgit:git-fetch[1]; you can track other public trees using linkgit:git-remote[1] to set up a "remote" and linkgit:git-fetch[1] to keep them up-to-date; see @@ -2171,11 +2188,14 @@ $ git push mytree release Now to apply some patches from the community. Think of a short snappy name for a branch to hold this patch (or related group of -patches), and create a new branch from the current tip of Linus's -branch: +patches), and create a new branch from a recent stable tag of +Linus's branch. Picking a stable base for your branch will: +1) help you: by avoiding inclusion of unrelated and perhaps lightly +tested changes +2) help future bug hunters that use "git bisect" to find problems ------------------------------------------------- -$ git checkout -b speed-up-spinlocks origin +$ git checkout -b speed-up-spinlocks v2.6.35 ------------------------------------------------- Now you apply the patch(es), run some tests, and commit the change(s). If @@ -2439,9 +2459,9 @@ You have performed no merges into mywork, so it is just a simple linear sequence of patches on top of "origin": ................................................ - o--o--o <-- origin + o--o--O <-- origin \ - o--o--o <-- mywork + a--b--c <-- mywork ................................................ Some more interesting work has been done in the upstream project, and @@ -2797,8 +2817,8 @@ Be aware that commits that the old version of example/master pointed at may be lost, as we saw in the previous section. [[remote-branch-configuration]] -Configuring remote branches ---------------------------- +Configuring remote-tracking branches +------------------------------------ We saw above that "origin" is just a shortcut to refer to the repository that you originally cloned from. This information is @@ -3850,7 +3870,7 @@ You create a commit object by giving it the tree that describes the state at the time of the commit, and a list of parents: ------------------------------------------------- -$ git commit-tree <tree> -p <parent> [-p <parent2> ..] +$ git commit-tree <tree> -p <parent> [(-p <parent2>)...] ------------------------------------------------- and then giving the reason for the commit on stdin (either through |