diff options
Diffstat (limited to 'Documentation')
133 files changed, 3358 insertions, 728 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index c6e536f180..4cd95da6b1 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -171,6 +171,11 @@ For C programs: - We try to keep to at most 80 characters per line. + - As a Git developer we assume you have a reasonably modern compiler + and we recommend you to enable the DEVELOPER makefile knob to + ensure your patch is clear of all compiler warnings we care about, + by e.g. "echo DEVELOPER=1 >>config.mak". + - We try to support a wide range of C compilers to compile Git with, including old ones. That means that you should not use C99 initializers, even if a lot of compilers grok it. @@ -521,12 +526,20 @@ Writing Documentation: modifying paragraphs or option/command explanations that contain options or commands: - Literal examples (e.g. use of command-line options, command names, and - configuration variables) are typeset in monospace, and if you can use - `backticks around word phrases`, do so. + Literal examples (e.g. use of command-line options, command names, + branch names, configuration and environment variables) must be + typeset in monospace (i.e. wrapped with backticks): `--pretty=oneline` `git rev-list` `remote.pushDefault` + `GIT_DIR` + `HEAD` + + An environment variable must be prefixed with "$" only when referring to its + value and not when referring to the variable itself, in this case there is + nothing to add except the backticks: + `GIT_DIR` is specified + `$GIT_DIR/hooks/pre-receive` Word phrases enclosed in `backtick characters` are rendered literally and will not be further expanded. The use of `backticks` to achieve the diff --git a/Documentation/Makefile b/Documentation/Makefile index 3e39e2815b..b43d66eae6 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -76,6 +76,7 @@ TECH_DOCS += technical/protocol-common TECH_DOCS += technical/racy-git TECH_DOCS += technical/send-pack-pipeline TECH_DOCS += technical/shallow +TECH_DOCS += technical/signature-format TECH_DOCS += technical/trivial-merge SP_ARTICLES += $(TECH_DOCS) SP_ARTICLES += technical/api-index @@ -146,7 +147,7 @@ else ASCIIDOC_EXTRA += -a git-asciidoc-no-roff endif endif -ifdef MAN_BOLD_LITERAL +ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif ifdef DOCBOOK_SUPPRESS_SP @@ -204,6 +205,7 @@ ifndef V QUIET_DBLATEX = @echo ' ' DBLATEX $@; QUIET_XSLTPROC = @echo ' ' XSLTPROC $@; QUIET_GEN = @echo ' ' GEN $@; + QUIET_LINT = @echo ' ' LINT $@; QUIET_STDERR = 2> /dev/null QUIET_SUBDIR0 = +@subdir= QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ @@ -427,4 +429,7 @@ quick-install-html: require-htmlrepo print-man1: @for i in $(MAN1_TXT); do echo $$i; done +lint-docs:: + $(QUIET_LINT)$(PERL_PATH) lint-gitlink.perl + .PHONY: FORCE diff --git a/Documentation/RelNotes/2.4.11.txt b/Documentation/RelNotes/2.4.11.txt new file mode 100644 index 0000000000..723360295c --- /dev/null +++ b/Documentation/RelNotes/2.4.11.txt @@ -0,0 +1,11 @@ +Git v2.4.11 Release Notes +========================= + +Fixes since v2.4.10 +------------------- + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.5.5.txt b/Documentation/RelNotes/2.5.5.txt new file mode 100644 index 0000000000..37eae9a2d9 --- /dev/null +++ b/Documentation/RelNotes/2.5.5.txt @@ -0,0 +1,11 @@ +Git v2.5.5 Release Notes +======================== + +Fixes since v2.5.4 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.6.6.txt b/Documentation/RelNotes/2.6.6.txt new file mode 100644 index 0000000000..023ad85ec6 --- /dev/null +++ b/Documentation/RelNotes/2.6.6.txt @@ -0,0 +1,11 @@ +Git v2.6.6 Release Notes +======================== + +Fixes since v2.6.5 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.7.2.txt b/Documentation/RelNotes/2.7.2.txt new file mode 100644 index 0000000000..4feef76704 --- /dev/null +++ b/Documentation/RelNotes/2.7.2.txt @@ -0,0 +1,41 @@ +Git v2.7.2 Release Notes +======================== + +Fixes since v2.7.1 +------------------ + + * The low-level merge machinery has been taught to use CRLF line + termination when inserting conflict markers to merged contents that + are themselves CRLF line-terminated. + + * "git worktree" had a broken code that attempted to auto-fix + possible inconsistency that results from end-users moving a + worktree to different places without telling Git (the original + repository needs to maintain backpointers to its worktrees, but + "mv" run by end-users who are not familiar with that fact will + obviously not adjust them), which actually made things worse + when triggered. + + * "git push --force-with-lease" has been taught to report if the push + needed to force (or fast-forwarded). + + * The emulated "yes" command used in our test scripts has been + tweaked not to spend too much time generating unnecessary output + that is not used, to help those who test on Windows where it would + not stop until it fills the pipe buffer due to lack of SIGPIPE. + + * The vimdiff backend for "git mergetool" has been tweaked to arrange + and number buffers in the order that would match the expectation of + majority of people who read left to right, then top down and assign + buffers 1 2 3 4 "mentally" to local base remote merge windows based + on that order. + + * The documentation for "git clean" has been corrected; it mentioned + that .git/modules/* are removed by giving two "-f", which has never + been the case. + + * Paths that have been told the index about with "add -N" are not + quite yet in the index, but a few commands behaved as if they + already are in a harmful way. + +Also includes tiny documentation and test updates. diff --git a/Documentation/RelNotes/2.7.3.txt b/Documentation/RelNotes/2.7.3.txt new file mode 100644 index 0000000000..6adf038915 --- /dev/null +++ b/Documentation/RelNotes/2.7.3.txt @@ -0,0 +1,62 @@ +Git v2.7.3 Release Notes +======================== + +Fixes since v2.7.2 +------------------ + + * Traditionally, the tests that try commands that work on the + contents in the working tree were named with "worktree" in their + filenames, but with the recent addition of "git worktree" + subcommand, whose tests are also named similarly, it has become + harder to tell them apart. The traditional tests have been renamed + to use "work-tree" instead in an attempt to differentiate them. + + * Many codepaths forget to check return value from git_config_set(); + the function is made to die() to make sure we do not proceed when + setting a configuration variable failed. + + * Handling of errors while writing into our internal asynchronous + process has been made more robust, which reduces flakiness in our + tests. + + * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a + rev, i.e. the object named by the the pathname with wildcard + characters in a tree object. + + * "git rev-parse --git-common-dir" used in the worktree feature + misbehaved when run from a subdirectory. + + * The "v(iew)" subcommand of the interactive "git am -i" command was + broken in 2.6.0 timeframe when the command was rewritten in C. + + * "git merge-tree" used to mishandle "both sides added" conflict with + its own "create a fake ancestor file that has the common parts of + what both sides have added and do a 3-way merge" logic; this has + been updated to use the usual "3-way merge with an empty blob as + the fake common ancestor file" approach used in the rest of the + system. + + * The memory ownership rule of fill_textconv() API, which was a bit + tricky, has been documented a bit better. + + * The documentation did not clearly state that the 'simple' mode is + now the default for "git push" when push.default configuration is + not set. + + * Recent versions of GNU grep are pickier when their input contains + arbitrary binary data, which some of our tests uses. Rewrite the + tests to sidestep the problem. + + * A helper function "git submodule" uses since v2.7.0 to list the + modules that match the pathspec argument given to its subcommands + (e.g. "submodule add <repo> <path>") has been fixed. + + * "git config section.var value" to set a value in per-repository + configuration file failed when it was run outside any repository, + but didn't say the reason correctly. + + * The code to read the pack data using the offsets stored in the pack + idx file has been made more carefully check the validity of the + data in the idx. + +Also includes documentation and test updates. diff --git a/Documentation/RelNotes/2.7.4.txt b/Documentation/RelNotes/2.7.4.txt new file mode 100644 index 0000000000..883ae896fe --- /dev/null +++ b/Documentation/RelNotes/2.7.4.txt @@ -0,0 +1,11 @@ +Git v2.7.4 Release Notes +======================== + +Fixes since v2.7.3 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.8.0.txt b/Documentation/RelNotes/2.8.0.txt new file mode 100644 index 0000000000..25079710fa --- /dev/null +++ b/Documentation/RelNotes/2.8.0.txt @@ -0,0 +1,439 @@ +Git 2.8 Release Notes +===================== + +Backward compatibility note +--------------------------- + +The rsync:// transport has been removed. + + +Updates since v2.7 +------------------ + +UI, Workflows & Features + + * It turns out "git clone" over rsync transport has been broken when + the source repository has packed references for a long time, and + nobody noticed nor complained about it. + + * "push" learned that its "--delete" option can be shortened to + "-d", just like "branch --delete" and "branch -d" are the same + thing. + + * "git blame" learned to produce the progress eye-candy when it takes + too much time before emitting the first line of the result. + + * "git grep" can now be configured (or told from the command line) + how many threads to use when searching in the working tree files. + + * Some "git notes" operations, e.g. "git log --notes=<note>", should + be able to read notes from any tree-ish that is shaped like a notes + tree, but the notes infrastructure required that the argument must + be a ref under refs/notes/. Loosen it to require a valid ref only + when the operation would update the notes (in which case we must + have a place to store the updated notes tree, iow, a ref). + + * "git grep" by default does not fall back to its "--no-index" + behavior outside a directory under Git's control (otherwise the + user may by mistake end up running a huge recursive search); with a + new configuration (set in $HOME/.gitconfig--by definition this + cannot be set in the config file per project), this safety can be + disabled. + + * "git pull --rebase" has been extended to allow invoking + "rebase -i". + + * "git p4" learned to cope with the type of a file getting changed. + + * "git format-patch" learned to notice format.outputDirectory + configuration variable. This allows "-o <dir>" option to be + omitted on the command line if you always use the same directory in + your workflow. + + * "interpret-trailers" has been taught to optionally update a file in + place, instead of always writing the result to the standard output. + + * Many commands that read files that are expected to contain text + that is generated (or can be edited) by the end user to control + their behavior (e.g. "git grep -f <filename>") have been updated + to be more tolerant to lines that are terminated with CRLF (they + used to treat such a line to contain payload that ends with CR, + which is usually not what the users expect). + + * "git notes merge" used to limit the source of the merged notes tree + to somewhere under refs/notes/ hierarchy, which was too limiting + when inventing a workflow to exchange notes with remote + repositories using remote-tracking notes trees (located in e.g. + refs/remote-notes/ or somesuch). + + * "git ls-files" learned a new "--eol" option to help diagnose + end-of-line problems. + + * "ls-remote" learned an option to show which branch the remote + repository advertises as its primary by pointing its HEAD at. + + * New http.proxyAuthMethod configuration variable can be used to + specify what authentication method to use, as a way to work around + proxies that do not give error response expected by libcurl when + CURLAUTH_ANY is used. Also, the codepath for proxy authentication + has been taught to use credential API to store the authentication + material in user's keyrings. + + * Update the untracked cache subsystem and change its primary UI from + "git update-index" to "git config". + + * There were a few "now I am doing this thing" progress messages in + the TCP connection code that can be triggered by setting a verbose + option internally in the code, but "git fetch -v" and friends never + passed the verbose option down to that codepath. + + * Clean/smudge filters defined in a configuration file of lower + precedence can now be overridden to be a pass-through no-op by + setting the variable to an empty string. + + * A new "<branch>^{/!-<pattern>}" notation can be used to name a + commit that is reachable from <branch> that does not match the + given <pattern>. + + * The "user.useConfigOnly" configuration variable can be used to + force the user to always set user.email & user.name configuration + variables, serving as a reminder for those who work on multiple + projects and do not want to put these in their $HOME/.gitconfig. + + * "git fetch" and friends that make network connections can now be + told to only use ipv4 (or ipv6). + + * Some authentication methods do not need username or password, but + libcurl needs some hint that it needs to perform authentication. + Supplying an empty username and password string is a valid way to + do so, but you can set the http.[<url>.]emptyAuth configuration + variable to achieve the same, if you find it cleaner. + + * You can now set http.[<url>.]pinnedpubkey to specify the pinned + public key when building with recent enough versions of libcURL. + + * The configuration system has been taught to phrase where it found a + bad configuration variable in a better way in its error messages. + "git config" learnt a new "--show-origin" option to indicate where + the values come from. + + * The "credential-cache" daemon process used to run in whatever + directory it happened to start in, but this made umount(2)ing the + filesystem that houses the repository harder; now the process + chdir()s to the directory that house its own socket on startup. + + * When "git submodule update" did not result in fetching the commit + object in the submodule that is referenced by the superproject, the + command learned to retry another fetch, specifically asking for + that commit that may not be connected to the refs it usually + fetches. + + * "git merge-recursive" learned "--no-renames" option to disable its + rename detection logic. + + * Across the transition at around Git version 2.0, the user used to + get a pretty loud warning when running "git push" without setting + push.default configuration variable. We no longer warn because the + transition was completed a long time ago. + + * README has been renamed to README.md and its contents got tweaked + slightly to make it easier on the eyes. + + +Performance, Internal Implementation, Development Support etc. + + * Add a framework to spawn a group of processes in parallel, and use + it to run "git fetch --recurse-submodules" in parallel. + + * A slight update to the Makefile to mark ".PHONY" targets as such + correctly. + + * In-core storage of the reverse index for .pack files (which lets + you go from a pack offset to an object name) has been streamlined. + + * d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like + $GIT_DIR, 2015-06-26) attempted to work around a glitch in alias + handling by overwriting GIT_WORK_TREE environment variable to + affect subprocesses when set_git_work_tree() gets called, which + resulted in a rather unpleasant regression to "clone" and "init". + Try to address the same issue by always restoring the environment + and respawning the real underlying command when handling alias. + + * The low-level code that is used to create symbolic references has + been updated to share more code with the code that deals with + normal references. + + * strbuf_getline() and friends have been redefined to make it easier + to identify which callsite of (new) strbuf_getline_lf() should + allow and silently ignore carriage-return at the end of the line to + help users on DOSsy systems. + + * "git shortlog" used to accumulate various pieces of information + regardless of what was asked to be shown in the final output. It + has been optimized by noticing what need not to be collected + (e.g. there is no need to collect the log messages when showing + only the number of changes). + + * "git checkout $branch" (and other operations that share the same + underlying machinery) has been optimized. + + * Automated tests in Travis CI environment has been optimized by + persisting runtime statistics of previous "prove" run, executing + tests that take longer before other ones; this reduces the total + wallclock time. + + * Test scripts have been updated to remove assumptions that are not + portable between Git for POSIX and Git for Windows, or to skip ones + with expectations that are not satisfiable on Git for Windows. + + * Some calls to strcpy(3) triggers a false warning from static + analyzers that are less intelligent than humans, and reducing the + number of these false hits helps us notice real issues. A few + calls to strcpy(3) in a couple of protrams that are already safe + has been rewritten to avoid false warnings. + + * The "name_path" API was an attempt to reduce the need to construct + the full path out of a series of path components while walking a + tree hierarchy, but over time made less efficient because the path + needs to be flattened, e.g. to be compared with another path that + is already flat. The API has been removed and its users have been + rewritten to simplify the overall code complexity. + + * Help those who debug http(s) part of the system. + (merge 0054045 sp/remote-curl-ssl-strerror later to maint). + + * The internal API to interact with "remote.*" configuration + variables has been streamlined. + + * The ref-filter's format-parsing code has been refactored, in + preparation for "branch --format" and friends. + + * Traditionally, the tests that try commands that work on the + contents in the working tree were named with "worktree" in their + filenames, but with the recent addition of "git worktree" + subcommand, whose tests are also named similarly, it has become + harder to tell them apart. The traditional tests have been renamed + to use "work-tree" instead in an attempt to differentiate them. + (merge 5549029 mg/work-tree-tests later to maint). + + * Many codepaths forget to check return value from git_config_set(); + the function is made to die() to make sure we do not proceed when + setting a configuration variable failed. + (merge 3d18064 ps/config-error later to maint). + + * Handling of errors while writing into our internal asynchronous + process has been made more robust, which reduces flakiness in our + tests. + (merge 43f3afc jk/epipe-in-async later to maint). + + * There is a new DEVELOPER knob that enables many compiler warning + options in the Makefile. + + * The way the test scripts configure the Apache web server has been + updated to work also for Apache 2.4 running on RedHat derived + distros. + + * Out of maintenance gcc on OSX 10.6 fails to compile the code in + 'master'; work it around by using clang by default on the platform. + + * The "name_path" API was an attempt to reduce the need to construct + the full path out of a series of path components while walking a + tree hierarchy, but over time made less efficient because the path + needs to be flattened, e.g. to be compared with another path that + is already flat, in many cases. The API has been removed and its + users have been rewritten to simplify the overall code complexity. + This incidentally also closes some heap-corruption holes. + + * Recent versions of GNU grep is pickier than before to decide if a + file is "binary" and refuse to give line-oriented hits when we + expect it to, unless explicitly told with "-a" option. As our + scripted Porcelains use sane_grep wrapper for line-oriented data, + even when the line may contain non-ASCII payload we took from + end-user data, use "grep -a" to implement sane_grep wrapper when + using an implementation of "grep" that takes the "-a" option. + + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.7 +---------------- + +Unless otherwise noted, all the fixes since v2.7 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * An earlier change in 2.5.x-era broke users' hooks and aliases by + exporting GIT_WORK_TREE to point at the root of the working tree, + interfering when they tried to use a different working tree without + setting GIT_WORK_TREE environment themselves. + + * The "exclude_list" structure has the usual "alloc, nr" pair of + fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot + to reset 'alloc' to 0 when it cleared 'nr' to discard the managed + array. + + * Paths that have been told the index about with "add -N" are not + quite yet in the index, but a few commands behaved as if they + already are in a harmful way. + + * "git send-email" was confused by escaped quotes stored in the alias + files saved by "mutt", which has been corrected. + + * A few non-portable C construct have been spotted by clang compiler + and have been fixed. + + * The documentation has been updated to hint the connection between + the '--signoff' option and DCO. + + * "git reflog" incorrectly assumed that all objects that used to be + at the tip of a ref must be commits, which caused it to segfault. + + * The ignore mechanism saw a few regressions around untracked file + listing and sparse checkout selection areas in 2.7.0; the change + that is responsible for the regression has been reverted. + + * Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR + (e.g. COMMIT_EDITMSG) that is meant to be left after the command is + done. This however did not work well if the repository is set to + be shared with core.sharedRepository and the umask of the previous + user is tighter. They have been made to work better by calling + unlink(2) and retrying after fopen(3) fails with EPERM. + + * Asking gitweb for a nonexistent commit left a warning in the server + log. + + Somebody may want to follow this up with an additional test, perhaps? + IIRC, we do test that no Perl warnings are given to the server log, + so this should have been caught if our test coverage were good. + + * "git rebase", unlike all other callers of "gc --auto", did not + ignore the exit code from "gc --auto". + + * Many codepaths that run "gc --auto" before exiting kept packfiles + mapped and left the file descriptors to them open, which was not + friendly to systems that cannot remove files that are open. They + now close the packs before doing so. + + * A recent optimization to filter-branch in v2.7.0 introduced a + regression when --prune-empty filter is used, which has been + corrected. + + * The description for SANITY prerequisite the test suite uses has + been clarified both in the comment and in the implementation. + + * "git tag" started listing a tag "foo" as "tags/foo" when a branch + named "foo" exists in the same repository; remove this unnecessary + disambiguation, which is a regression introduced in v2.7.0. + + * The way "git svn" uses auth parameter was broken by Subversion + 1.9.0 and later. + + * The "split" subcommand of "git subtree" (in contrib/) incorrectly + skipped merges when it shouldn't, which was corrected. + + * A few options of "git diff" did not work well when the command was + run from a subdirectory. + + * The command line completion learned a handful of additional options + and command specific syntax. + + * dirname() emulation has been added, as Msys2 lacks it. + + * The underlying machinery used by "ls-files -o" and other commands + has been taught not to create empty submodule ref cache for a + directory that is not a submodule. This removes a ton of wasted + CPU cycles. + + * "git worktree" had a broken code that attempted to auto-fix + possible inconsistency that results from end-users moving a + worktree to different places without telling Git (the original + repository needs to maintain back-pointers to its worktrees, + but "mv" run by end-users who are not familiar with that fact + will obviously not adjust them), which actually made things + worse when triggered. + + * The low-level merge machinery has been taught to use CRLF line + termination when inserting conflict markers to merged contents that + are themselves CRLF line-terminated. + + * "git push --force-with-lease" has been taught to report if the push + needed to force (or fast-forwarded). + + * The emulated "yes" command used in our test scripts has been + tweaked not to spend too much time generating unnecessary output + that is not used, to help those who test on Windows where it would + not stop until it fills the pipe buffer due to lack of SIGPIPE. + + * The documentation for "git clean" has been corrected; it mentioned + that .git/modules/* are removed by giving two "-f", which has never + been the case. + + * The vimdiff backend for "git mergetool" has been tweaked to arrange + and number buffers in the order that would match the expectation of + majority of people who read left to right, then top down and assign + buffers 1 2 3 4 "mentally" to local base remote merge windows based + on that order. + + * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a + rev, i.e. the object named by the the pathname with wildcard + characters in a tree object. + (merge aac4fac nd/dwim-wildcards-as-pathspecs later to maint). + + * "git rev-parse --git-common-dir" used in the worktree feature + misbehaved when run from a subdirectory. + (merge 17f1365 nd/git-common-dir-fix later to maint). + + * "git worktree add -B <branchname>" did not work. + + * The "v(iew)" subcommand of the interactive "git am -i" command was + broken in 2.6.0 timeframe when the command was rewritten in C. + (merge 708b8cc jc/am-i-v-fix later to maint). + + * "git merge-tree" used to mishandle "both sides added" conflict with + its own "create a fake ancestor file that has the common parts of + what both sides have added and do a 3-way merge" logic; this has + been updated to use the usual "3-way merge with an empty blob as + the fake common ancestor file" approach used in the rest of the + system. + (merge 907681e jk/no-diff-emit-common later to maint). + + * The memory ownership rule of fill_textconv() API, which was a bit + tricky, has been documented a bit better. + (merge a64e6a4 jk/more-comments-on-textconv later to maint). + + * Update various codepaths to avoid manually-counted malloc(). + (merge 08c95df jk/tighten-alloc later to maint). + + * The documentation did not clearly state that the 'simple' mode is + now the default for "git push" when push.default configuration is + not set. + (merge f6b1fb3 mm/push-simple-doc later to maint). + + * Recent versions of GNU grep are pickier when their input contains + arbitrary binary data, which some of our tests uses. Rewrite the + tests to sidestep the problem. + (merge 3b1442d jk/grep-binary-workaround-in-test later to maint). + + * A helper function "git submodule" uses since v2.7.0 to list the + modules that match the pathspec argument given to its subcommands + (e.g. "submodule add <repo> <path>") has been fixed. + (merge 2b56bb7 sb/submodule-module-list-fix later to maint). + + * "git config section.var value" to set a value in per-repository + configuration file failed when it was run outside any repository, + but didn't say the reason correctly. + (merge 638fa62 js/config-set-in-non-repository later to maint). + + * The code to read the pack data using the offsets stored in the pack + idx file has been made more carefully check the validity of the + data in the idx. + (merge 7465feb jk/pack-idx-corruption-safety later to maint). + + * Other minor clean-ups and documentation updates + (merge f459823 ak/extract-argv0-last-dir-sep later to maint). + (merge 63ca1c0 ak/git-strip-extension-from-dashed-command later to maint). + (merge 4867f11 ps/plug-xdl-merge-leak later to maint). + (merge 4938686 dt/initial-ref-xn-commit-doc later to maint). + (merge 9537f21 ma/update-hooks-sample-typofix later to maint). diff --git a/Documentation/RelNotes/2.8.1.txt b/Documentation/RelNotes/2.8.1.txt new file mode 100644 index 0000000000..ef6d80b008 --- /dev/null +++ b/Documentation/RelNotes/2.8.1.txt @@ -0,0 +1,9 @@ +Git v2.8.1 Release Notes +======================== + +Fixes since v2.8 +---------------- + + * "make rpmbuild" target was broken as its input, git.spec.in, was + not updated to match a file it describes that has been renamed + recently. This has been fixed. diff --git a/Documentation/RelNotes/2.8.2.txt b/Documentation/RelNotes/2.8.2.txt new file mode 100644 index 0000000000..447b1933a8 --- /dev/null +++ b/Documentation/RelNotes/2.8.2.txt @@ -0,0 +1,70 @@ +Git v2.8.2 Release Notes +======================== + +Fixes since v2.8.1 +------------------ + + * The embedded args argv-array in the child process is used to build + the command line to run pack-objects instead of using a separate + array of strings. + + * Bunch of tests on "git clone" has been renumbered for better + organization. + + * The tests that involve running httpd leaked the system-wide + configuration in /etc/gitconfig to the tested environment. + + * "index-pack --keep=<msg>" was broken since v2.1.0 timeframe. + + * "git config --get-urlmatch", unlike other variants of the "git + config --get" family, did not signal error with its exit status + when there was no matching configuration. + + * The "--local-env-vars" and "--resolve-git-dir" options of "git + rev-parse" failed to work outside a repository when the command's + option parsing was rewritten in 1.8.5 era. + + * Fetching of history by naming a commit object name directly didn't + work across remote-curl transport. + + * A small memory leak in an error codepath has been plugged in xdiff + code. + + * strbuf_getwholeline() did not NUL-terminate the buffer on certain + corner cases in its error codepath. + + * The startup_info data, which records if we are working inside a + repository (among other things), are now uniformly available to Git + subcommand implementations, and Git avoids attempting to touch + references when we are not in a repository. + + * "git mergetool" did not work well with conflicts that both sides + deleted. + + * "git send-email" had trouble parsing alias file in mailrc format + when lines in it had trailing whitespaces on them. + + * When "git merge --squash" stopped due to conflict, the concluding + "git commit" failed to read in the SQUASH_MSG that shows the log + messages from all the squashed commits. + + * "git merge FETCH_HEAD" dereferenced NULL pointer when merging + nothing into an unborn history (which is arguably unusual usage, + which perhaps was the reason why nobody noticed it). + + * Build updates for MSVC. + + * "git diff -M" used to work better when two originally identical + files A and B got renamed to X/A and X/B by pairing A to X/A and B + to X/B, but this was broken in the 2.0 timeframe. + + * "git send-pack --all <there>" was broken when its command line + option parsing was written in the 2.6 timeframe. + + * When running "git blame $path" with unnormalized data in the index + for the path, the data in the working tree was blamed, even though + "git add" would not have changed what is already in the index, due + to "safe crlf" that disables the line-end conversion. It has been + corrected. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.8.3.txt b/Documentation/RelNotes/2.8.3.txt new file mode 100644 index 0000000000..fedd9968e5 --- /dev/null +++ b/Documentation/RelNotes/2.8.3.txt @@ -0,0 +1,101 @@ +Git v2.8.3 Release Notes +======================== + +Fixes since v2.8.2 +------------------ + + * "git send-email" now uses a more readable timestamps when + formulating a message ID. + + * The repository set-up sequence has been streamlined (the biggest + change is that there is no longer git_config_early()), so that we + do not attempt to look into refs/* when we know we do not have a + Git repository. + + * When "git worktree" feature is in use, "git branch -d" allowed + deletion of a branch that is checked out in another worktree + + * When "git worktree" feature is in use, "git branch -m" renamed a + branch that is checked out in another worktree without adjusting + the HEAD symbolic ref for the worktree. + + * "git format-patch --help" showed `-s` and `--no-patch` as if these + are valid options to the command. We already hide `--patch` option + from the documentation, because format-patch is about showing the + diff, and the documentation now hides these options as well. + + * A change back in version 2.7 to "git branch" broke display of a + symbolic ref in a non-standard place in the refs/ hierarchy (we + expect symbolic refs to appear in refs/remotes/*/HEAD to point at + the primary branch the remote has, and as .git/HEAD to point at the + branch we locally checked out). + + * A partial rewrite of "git submodule" in the 2.7 timeframe changed + the way the gitdir: pointer in the submodules point at the real + repository location to use absolute paths by accident. This has + been corrected. + + * "git commit" misbehaved in a few minor ways when an empty message + is given via -m '', all of which has been corrected. + + * Support for CRAM-MD5 authentication method in "git imap-send" did + not work well. + + * The socks5:// proxy support added back in 2.6.4 days was not aware + that socks5h:// proxies behave differently. + + * "git config" had a codepath that tried to pass a NULL to + printf("%s"), which nobody seems to have noticed. + + * On Cygwin, object creation uses the "create a temporary and then + rename it to the final name" pattern, not "create a temporary, + hardlink it to the final name and then unlink the temporary" + pattern. + + This is necessary to use Git on Windows shared directories, and is + already enabled for the MinGW and plain Windows builds. It also + has been used in Cygwin packaged versions of Git for quite a while. + See http://thread.gmane.org/gmane.comp.version-control.git/291853 + and http://thread.gmane.org/gmane.comp.version-control.git/275680. + + * "git replace -e" did not honour "core.editor" configuration. + + * Upcoming OpenSSL 1.1.0 will break compilation b updating a few APIs + we use in imap-send, which has been adjusted for the change. + + * "git submodule" reports the paths of submodules the command + recurses into, but this was incorrect when the command was not run + from the root level of the superproject. + + * The test scripts for "git p4" (but not "git p4" implementation + itself) has been updated so that they would work even on a system + where the installed version of Python is python 3. + + * The "user.useConfigOnly" configuration variable makes it an error + if users do not explicitly set user.name and user.email. However, + its check was not done early enough and allowed another error to + trigger, reporting that the default value we guessed from the + system setting was unusable. This was a suboptimal end-user + experience as we want the users to set user.name/user.email without + relying on the auto-detection at all. + + * "git mv old new" did not adjust the path for a submodule that lives + as a subdirectory inside old/ directory correctly. + + * "git push" from a corrupt repository that attempts to push a large + number of refs deadlocked; the thread to relay rejection notices + for these ref updates blocked on writing them to the main thread, + after the main thread at the receiving end notices that the push + failed and decides not to read these notices and return a failure. + + * A question by "git send-email" to ask the identity of the sender + has been updated. + + * Recent update to Git LFS broke "git p4" by changing the output from + its "lfs pointer" subcommand. + + * Some multi-byte encoding can have a backslash byte as a later part + of one letter, which would confuse "highlight" filter used in + gitweb. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.8.4.txt b/Documentation/RelNotes/2.8.4.txt new file mode 100644 index 0000000000..f4e2552836 --- /dev/null +++ b/Documentation/RelNotes/2.8.4.txt @@ -0,0 +1,69 @@ +Git v2.8.4 Release Notes +======================== + +Fixes since v2.8.3 +------------------ + + * Documentation for "git merge --verify-signatures" has been updated + to clarify that the signature of only the commit at the tip is + verified. Also the phrasing used for signature and key validity is + adjusted to align with that used by OpenPGP. + + * On Windows, .git and optionally any files whose name starts with a + dot are now marked as hidden, with a core.hideDotFiles knob to + customize this behaviour. + + * Portability enhancement for "rebase -i" to help platforms whose + shell does not like "for i in <empty>" (which is not POSIX-kosher). + + * "git fsck" learned to catch NUL byte in a commit object as + potential error and warn. + + * CI test was taught to build documentation pages. + + * Many 'linkgit:<git documentation page>' references were broken, + which are all fixed with this. + + * "git describe --contains" often made a hard-to-justify choice of + tag to give name to a given commit, because it tried to come up + with a name with smallest number of hops from a tag, causing an old + commit whose close descendant that is recently tagged were not + described with respect to an old tag but with a newer tag. It did + not help that its computation of "hop" count was further tweaked to + penalize being on a side branch of a merge. The logic has been + updated to favor using the tag with the oldest tagger date, which + is a lot easier to explain to the end users: "We describe a commit + in terms of the (chronologically) oldest tag that contains the + commit." + + * Running tests with '-x' option to trace the individual command + executions is a useful way to debug test scripts, but some tests + that capture the standard error stream and check what the command + said can be broken with the trace output mixed in. When running + our tests under "bash", however, we can redirect the trace output + to another file descriptor to keep the standard error of programs + being tested intact. + + * "http.cookieFile" configuration variable clearly wants a pathname, + but we forgot to treat it as such by e.g. applying tilde expansion. + + * When de-initialising all submodules, "git submodule deinit" gave a + faulty recommendation to use "git submodule deinit .", which would + result in a strange error message in a pathological corner case. + This has been corrected to suggest "submodule deinit --all" instead. + + * Many commands normalize command line arguments from NFD to NFC + variant of UTF-8 on OSX, but commands in the "diff" family did + not, causing "git diff $path" to complain that no such path is + known to Git. They have been taught to do the normalization. + + * A couple of bugs around core.autocrlf have been fixed. + + * "git difftool" learned to handle unmerged paths correctly in + dir-diff mode. + + * The "are we talking with TTY, doing an interactive session?" + detection has been updated to work better for "Git for Windows". + + +Also contains other minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.9.0.txt b/Documentation/RelNotes/2.9.0.txt new file mode 100644 index 0000000000..b61d36712f --- /dev/null +++ b/Documentation/RelNotes/2.9.0.txt @@ -0,0 +1,512 @@ +Git 2.9 Release Notes +===================== + +Backward compatibility notes +---------------------------- + +The end-user facing Porcelain level commands in the "git diff" and +"git log" family by default enable the rename detection; you can still +use "diff.renames" configuration variable to disable this. + +Merging two branches that have no common ancestor with "git merge" is +by default forbidden now to prevent creating such an unusual merge by +mistake. + +The output formats of "git log" that indents the commit log message by +4 spaces now expands HT in the log message by default. You can use +the "--no-expand-tabs" option to disable this. + +"git commit-tree" plumbing command required the user to always sign +its result when the user sets the commit.gpgsign configuration +variable, which was an ancient mistake, which this release corrects. +A script that drives commit-tree, if it relies on this mistake, now +needs to read commit.gpgsign and pass the -S option as necessary. + + +Updates since v2.8 +------------------ + +UI, Workflows & Features + + * Comes with git-multimail 1.3.1 (in contrib/). + + * The end-user facing commands like "git diff" and "git log" + now enable the rename detection by default. + + * The credential.helper configuration variable is cumulative and + there is no good way to override it from the command line. As + a special case, giving an empty string as its value now serves + as the signal to clear the values specified in various files. + + * A new "interactive.diffFilter" configuration can be used to + customize the diff shown in "git add -i" sessions. + + * "git p4" now allows P4 author names to be mapped to Git author + names. + + * "git rebase -x" can be used without passing "-i" option. + + * "git -c credential.<var>=<value> submodule" can now be used to + propagate configuration variables related to credential helper + down to the submodules. + + * "git tag" can create an annotated tag without explicitly given an + "-a" (or "-s") option (i.e. when a tag message is given). A new + configuration variable, tag.forceSignAnnotated, can be used to tell + the command to create signed tag in such a situation. + + * "git merge" used to allow merging two branches that have no common + base by default, which led to a brand new history of an existing + project created and then get pulled by an unsuspecting maintainer, + which allowed an unnecessary parallel history merged into the + existing project. The command has been taught not to allow this by + default, with an escape hatch "--allow-unrelated-histories" option + to be used in a rare event that merges histories of two projects + that started their lives independently. + + * "git pull" has been taught to pass the "--allow-unrelated-histories" + option to underlying "git merge". + + * "git apply -v" learned to report paths in the patch that were + skipped via --include/--exclude mechanism or being outside the + current working directory. + + * Shell completion (in contrib/) updates. + + * The commit object name reported when "rebase -i" stops has been + shortened. + + * "git worktree add" can be given "--no-checkout" option to only + create an empty worktree without checking out the files. + + * "git mergetools" learned to drive ExamDiff. + + * "git pull --rebase" learned "--[no-]autostash" option, so that + the rebase.autostash configuration variable set to true can be + overridden from the command line. + + * When "git log" shows the log message indented by 4-spaces, the + remainder of a line after a HT does not align in the way the author + originally intended. The command now expands tabs by default to help + such a case, and allows the users to override it with a new option, + "--no-expand-tabs". + + * "git send-email" now uses a more readable timestamps when + formulating a message ID. + + * "git rerere" can encounter two or more files with the same conflict + signature that have to be resolved in different ways, but there was + no way to record these separate resolutions. + + * "git p4" learned to record P4 jobs in Git commit that imports from + the history in Perforce. + + * "git describe --contains" often made a hard-to-justify choice of + tag to name a given commit, because it tried to come up + with a name with smallest number of hops from a tag, causing an old + commit whose close descendant that is recently tagged were not + described with respect to an old tag but with a newer tag. It did + not help that its computation of "hop" count was further tweaked to + penalize being on a side branch of a merge. The logic has been + updated to favor using the tag with the oldest tagger date, which + is a lot easier to explain to the end users: "We describe a commit + in terms of the (chronologically) oldest tag that contains the + commit." + + * "git clone" learned the "--shallow-submodules" option. + + * HTTP transport clients learned to throw extra HTTP headers at the + server, specified via http.extraHeader configuration variable. + + * The "--compaction-heuristic" option to "git diff" family of + commands enables a heuristic to make the patch output more readable + by using a blank line as a strong hint that the contents before and + after it belong to logically separate units. It is still + experimental. + + * A new configuration variable core.hooksPath allows customizing + where the hook directory is. + + * An earlier addition of "sanitize_submodule_env" with 14111fc4 (git: + submodule honor -c credential.* from command line, 2016-02-29) + turned out to be a convoluted no-op; implement what it wanted to do + correctly, and stop filtering settings given via "git -c var=val". + + * "git commit --dry-run" reported "No, no, you cannot commit." in one + case where "git commit" would have allowed you to commit, and this + improves it a little bit ("git commit --dry-run --short" still does + not give you the correct answer, for example). This is a stop-gap + measure in that "commit --short --dry-run" still gives an incorrect + result. + + * The experimental "multiple worktree" feature gains more safety to + forbid operations on a branch that is checked out or being actively + worked on elsewhere, by noticing that e.g. it is being rebased. + + * "git format-patch" learned a new "--base" option to record what + (public, well-known) commit the original series was built on in + its output. + + * "git commit" learned to pay attention to the "commit.verbose" + configuration variable and act as if the "--verbose" option + was given from the command line. + + * Updated documentation gives hints to GMail users with two-factor + auth enabled that they need app-specific-password when using + "git send-email". + + * The manpage output of our documentation did not render well in + terminal; typeset literals in bold by default to make them stand + out more. + + * The mark-up in the top-level README.md file has been updated to + typeset CLI command names differently from the body text. + + +Performance, Internal Implementation, Development Support etc. + + * The embedded args argv-array in the child process is used to build + the command line to run pack-objects instead of using a separate + array of strings. + + * A test for tags has been restructured so that more parts of it can + easily be run on a platform without a working GnuPG. + + * The startup_info data, which records if we are working inside a + repository (among other things), are now uniformly available to Git + subcommand implementations, and Git avoids attempting to touch + references when we are not in a repository. + + * The command line argument parser for "receive-pack" has been + rewritten to use parse-options. + + * A major part of "git submodule update" has been ported to C to take + advantage of the recently added framework to run download tasks in + parallel. Other updates to "git submodule" that move pieces of + logic to C continues. + + * Rename bunch of tests on "git clone" for better organization. + + * The tests that involve running httpd leaked the system-wide + configuration in /etc/gitconfig to the tested environment. + + * Build updates for MSVC. + + * The repository set-up sequence has been streamlined (the biggest + change is that there is no longer git_config_early()), so that we + do not attempt to look into refs/* when we know we do not have a + Git repository. + + * Code restructuring around the "refs" API to prepare for pluggable + refs backends. + + * Sources to many test helper binaries and the generated helpers + have been moved to t/helper/ subdirectory to reduce clutter at the + top level of the tree. + + * Unify internal logic between "git tag -v" and "git verify-tag" + commands by making one directly call into the other. + + * "merge-recursive" strategy incorrectly checked if a path that is + involved in its internal merge exists in the working tree. + + * The test scripts for "git p4" (but not "git p4" implementation + itself) has been updated so that they would work even on a system + where the installed version of Python is python 3. + + * As nobody maintains our in-tree git.spec.in and distros use their + own spec file, we stopped pretending that we support "make rpm". + + * Move from "unsigned char[20]" to "struct object_id" continues. + + * The code for warning_errno/die_errno has been refactored and a new + error_errno() reporting helper is introduced. + (merge 1da045f nd/error-errno later to maint). + + * Running tests with '-x' option to trace the individual command + executions is a useful way to debug test scripts, but some tests + that capture the standard error stream and check what the command + said can be broken with the trace output mixed in. When running + our tests under "bash", however, we can redirect the trace output + to another file descriptor to keep the standard error of programs + being tested intact. + + * t0040 had too many unnecessary repetitions in its test data. Teach + test-parse-options program so that a caller can tell what it + expects in its output, so that these repetitions can be cleaned up. + + * Add perf test for "rebase -i". + + * Common mistakes when writing gitlink: in our documentation are + found by "make check-docs". + + * t9xxx series has been updated primarily for readability, while + fixing small bugs in it. A few scripted Porcelain commands have + also been updated to fix possible bugs around their use of + "test -z" and "test -n". + + * CI test was taught to run git-svn tests. + + * "git cat-file --batch-all" has been sped up, by taking advantage + of the fact that it does not have to read a list of objects, in two + ways. + + * test updates to make it more readable and maintainable. + (merge e6273f4 es/t1500-modernize later to maint). + + * "make DEVELOPER=1" worked as expected; setting DEVELOPER=1 in + config.mak didn't. + (merge 51dd3e8 mm/makefile-developer-can-be-in-config-mak later to maint). + + * The way how "submodule--helper list" signals unmatch error to its + callers has been updated. + + * A bash-ism "local" has been removed from "git submodule" scripted + Porcelain. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.8 +---------------- + +Unless otherwise noted, all the fixes since v2.8 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git config --get-urlmatch", unlike other variants of the "git + config --get" family, did not signal error with its exit status + when there was no matching configuration. + + * The "--local-env-vars" and "--resolve-git-dir" options of "git + rev-parse" failed to work outside a repository when the command's + option parsing was rewritten in 1.8.5 era. + + * "git index-pack --keep[=<msg>] pack-$name.pack" simply did not work. + + * Fetching of history by naming a commit object name directly didn't + work across remote-curl transport. + + * A small memory leak in an error codepath has been plugged in xdiff + code. + + * strbuf_getwholeline() did not NUL-terminate the buffer on certain + corner cases in its error codepath. + + * "git mergetool" did not work well with conflicts that both sides + deleted. + + * "git send-email" had trouble parsing alias file in mailrc format + when lines in it had trailing whitespaces on them. + + * When "git merge --squash" stopped due to conflict, the concluding + "git commit" failed to read in the SQUASH_MSG that shows the log + messages from all the squashed commits. + + * "git merge FETCH_HEAD" dereferenced NULL pointer when merging + nothing into an unborn history (which is arguably unusual usage, + which perhaps was the reason why nobody noticed it). + + * When "git worktree" feature is in use, "git branch -d" allowed + deletion of a branch that is checked out in another worktree, + which was wrong. + + * When "git worktree" feature is in use, "git branch -m" renamed a + branch that is checked out in another worktree without adjusting + the HEAD symbolic ref for the worktree. + + * "git diff -M" used to work better when two originally identical + files A and B got renamed to X/A and X/B by pairing A to X/A and B + to X/B, but this was broken in the 2.0 timeframe. + + * "git send-pack --all <there>" was broken when its command line + option parsing was written in the 2.6 timeframe. + + * "git format-patch --help" showed `-s` and `--no-patch` as if these + are valid options to the command. We already hide `--patch` option + from the documentation, because format-patch is about showing the + diff, and the documentation now hides these options as well. + + * When running "git blame $path" with unnormalized data in the index + for the path, the data in the working tree was blamed, even though + "git add" would not have changed what is already in the index, due + to "safe crlf" that disables the line-end conversion. It has been + corrected. + + * A change back in version 2.7 to "git branch" broke display of a + symbolic ref in a non-standard place in the refs/ hierarchy (we + expect symbolic refs to appear in refs/remotes/*/HEAD to point at + the primary branch the remote has, and as .git/HEAD to point at the + branch we locally checked out). + + * A partial rewrite of "git submodule" in the 2.7 timeframe changed + the way the gitdir: pointer in the submodules point at the real + repository location to use absolute paths by accident. This has + been corrected. + + * "git commit" misbehaved in a few minor ways when an empty message + is given via -m '', all of which has been corrected. + + * Support for CRAM-MD5 authentication method in "git imap-send" did + not work well. + + * Upcoming OpenSSL 1.1.0 will break compilation by updating a few API + elements we use in imap-send, which has been adjusted for the change. + + * The socks5:// proxy support added back in 2.6.4 days was not aware + that socks5h:// proxies behave differently from socks5:// proxies. + + * "git config" had a codepath that tried to pass a NULL to + printf("%s"), which nobody seems to have noticed. + + * On Cygwin, object creation uses the "create a temporary and then + rename it to the final name" pattern, not "create a temporary, + hardlink it to the final name and then unlink the temporary" + pattern. + + This is necessary to use Git on Windows shared directories, and is + already enabled for the MinGW and plain Windows builds. It also + has been used in Cygwin packaged versions of Git for quite a while. + See http://thread.gmane.org/gmane.comp.version-control.git/291853 + + * "merge-octopus" strategy did not ensure that the index is clean + when merge begins. + + * When "git merge" notices that the merge can be resolved purely at + the tree level (without having to merge blobs) and the resulting + tree happens to already exist in the object store, it forgot to + update the index, which left an inconsistent state that would + break later operations. + + * "git submodule" reports the paths of submodules the command + recurses into, but these paths were incorrectly reported when + the command was not run from the root level of the superproject. + + * The "user.useConfigOnly" configuration variable makes it an error + if users do not explicitly set user.name and user.email. However, + its check was not done early enough and allowed another error to + trigger, reporting that the default value we guessed from the + system setting was unusable. This was a suboptimal end-user + experience as we want the users to set user.name/user.email without + relying on the auto-detection at all. + + * "git mv old new" did not adjust the path for a submodule that lives + as a subdirectory inside old/ directory correctly. + + * "git replace -e" did not honour "core.editor" configuration. + + * "git push" from a corrupt repository that attempts to push a large + number of refs deadlocked; the thread to relay rejection notices + for these ref updates blocked on writing them to the main thread, + after the main thread at the receiving end notices that the push + failed and decides not to read these notices and return a failure. + + * mmap emulation on Windows has been optimized and work better without + consuming paging store when not needed. + + * A question by "git send-email" to ask the identity of the sender + has been updated. + + * UI consistency improvements for "git mergetool". + + * "git rebase -m" could be asked to rebase an entire branch starting + from the root, but failed by assuming that there always is a parent + commit to the first commit on the branch. + + * Fix a broken "p4 lfs" test. + + * Recent update to Git LFS broke "git p4" by changing the output from + its "lfs pointer" subcommand. + + * "git fetch" test t5510 was flaky while running a (forced) automagic + garbage collection. + + * Documentation updates to help contributors setting up Travis CI + test for their patches. + + * Some multi-byte encoding can have a backslash byte as a later part + of one letter, which would confuse "highlight" filter used in + gitweb. + + * "git commit-tree" plumbing command required the user to always sign + its result when the user sets the commit.gpgsign configuration + variable, which was an ancient mistake. Rework "git rebase" that + relied on this mistake so that it reads commit.gpgsign and pass (or + not pass) the -S option to "git commit-tree" to keep the end-user + expectation the same, while teaching "git commit-tree" to ignore + the configuration variable. This will stop requiring the users to + sign commit objects used internally as an implementation detail of + "git stash". + + * "http.cookieFile" configuration variable clearly wants a pathname, + but we forgot to treat it as such by e.g. applying tilde expansion. + + * Consolidate description of tilde-expansion that is done to + configuration variables that take pathname to a single place. + + * Correct faulty recommendation to use "git submodule deinit ." when + de-initialising all submodules, which would result in a strange + error message in a pathological corner case. + + * Many 'linkgit:<git documentation page>' references were broken, + which are all fixed with this. + + * "git rerere" can get confused by conflict markers deliberately left + by the inner merge step, because they are indistinguishable from + the real conflict markers left by the outermost merge which are + what the end user and "rerere" need to look at. This was fixed by + making the conflict markers left by the inner merges a bit longer. + (merge 0f9fd5c jc/ll-merge-internal later to maint). + + * CI test was taught to build documentation pages. + + * "git fsck" learned to catch NUL byte in a commit object as + potential error and warn. + + * Portability enhancement for "rebase -i" to help platforms whose + shell does not like "for i in <empty>" (which is not POSIX-kosher). + + * On Windows, .git and optionally any files whose name starts with a + dot are now marked as hidden, with a core.hideDotFiles knob to + customize this behaviour. + + * Documentation for "git merge --verify-signatures" has been updated + to clarify that the signature of only the commit at the tip is + verified. Also the phrasing used for signature and key validity is + adjusted to align with that used by OpenPGP. + + * A couple of bugs around core.autocrlf have been fixed. + + * Many commands normalize command line arguments from NFD to NFC + variant of UTF-8 on OSX, but commands in the "diff" family did + not, causing "git diff $path" to complain that no such path is + known to Git. They have been taught to do the normalization. + + * "git difftool" learned to handle unmerged paths correctly in + dir-diff mode. + + * The "are we talking with TTY, doing an interactive session?" + detection has been updated to work better for "Git for Windows". + + * We forgot to add "git log --decorate=auto" to documentation when we + added the feature back in v2.1.0 timeframe. + (merge 462cbb4 rj/log-decorate-auto later to maint). + + * "git fast-import --export-marks" would overwrite the existing marks + file even when it makes a dump from its custom die routine. + Prevent it from doing so when we have an import-marks file but + haven't finished reading it. + (merge f4beed6 fc/fast-import-broken-marks-file later to maint). + + * "git rebase -i", after it fails to auto-resolve the conflict, had + an unnecessary call to "git rerere" from its very early days, which + was spotted recently; the call has been removed. + (merge 7063693 js/rebase-i-dedup-call-to-rerere later to maint). + + * Other minor clean-ups and documentation updates + (merge cd82b7a pa/cherry-pick-doc-typo later to maint). + (merge 2bb73ae rs/patch-id-use-skip-prefix later to maint). + (merge aa20cbc rs/apply-name-terminate later to maint). + (merge fe17fc0 jc/t2300-setup later to maint). + (merge e256eec jk/shell-portability later to maint). diff --git a/Documentation/RelNotes/2.9.1.txt b/Documentation/RelNotes/2.9.1.txt new file mode 100644 index 0000000000..338394097e --- /dev/null +++ b/Documentation/RelNotes/2.9.1.txt @@ -0,0 +1,117 @@ +Git v2.9.1 Release Notes +======================== + +Fixes since v2.9 +---------------- + + * When "git daemon" is run without --[init-]timeout specified, a + connection from a client that silently goes offline can hang around + for a long time, wasting resources. The socket-level KEEPALIVE has + been enabled to allow the OS to notice such failed connections. + + * The commands in `git log` family take %C(auto) in a custom format + string. This unconditionally turned the color on, ignoring + --no-color or with --color=auto when the output is not connected to + a tty; this was corrected to make the format truly behave as + "auto". + + * "git rev-list --count" whose walk-length is limited with "-n" + option did not work well with the counting optimized to look at the + bitmap index. + + * "git show -W" (extend hunks to cover the entire function, delimited + by lines that match the "funcname" pattern) used to show the entire + file when a change added an entire function at the end of the file, + which has been fixed. + + * The documentation set has been updated so that literal commands, + configuration variables and environment variables are consistently + typeset in fixed-width font and bold in manpages. + + * "git svn propset" subcommand that was added in 2.3 days is + documented now. + + * The documentation tries to consistently spell "GPG"; when + referring to the specific program name, "gpg" is used. + + * "git reflog" stopped upon seeing an entry that denotes a branch + creation event (aka "unborn"), which made it appear as if the + reflog was truncated. + + * The git-prompt scriptlet (in contrib/) was not friendly with those + who uses "set -u", which has been fixed. + + * A codepath that used alloca(3) to place an unbounded amount of data + on the stack has been updated to avoid doing so. + + * "git update-index --add --chmod=+x file" may be usable as an escape + hatch, but not a friendly thing to force for people who do need to + use it regularly. "git add --chmod=+x file" can be used instead. + + * Build improvements for gnome-keyring (in contrib/) + + * "git status" used to say "working directory" when it meant "working + tree". + + * Comments about misbehaving FreeBSD shells have been clarified with + the version number (9.x and before are broken, newer ones are OK). + + * "git cherry-pick A" worked on an unborn branch, but "git + cherry-pick A..B" didn't. + + * "git add -i/-p" learned to honor diff.compactionHeuristic + experimental knob, so that the user can work on the same hunk split + as "git diff" output. + + * "log --graph --format=" learned that "%>|(N)" specifies the width + relative to the terminal's left edge, not relative to the area to + draw text that is to the right of the ancestry-graph section. It + also now accepts negative N that means the column limit is relative + to the right border. + + * The ownership rule for the piece of memory that hold references to + be fetched in "git fetch" was screwy, which has been cleaned up. + + * "git bisect" makes an internal call to "git diff-tree" when + bisection finds the culprit, but this call did not initialize the + data structure to pass to the diff-tree API correctly. + + * Formats of the various data (and how to validate them) where we use + GPG signature have been documented. + + * Fix an unintended regression in v2.9 that breaks "clone --depth" + that recurses down to submodules by forcing the submodules to also + be cloned shallowly, which many server instances that host upstream + of the submodules are not prepared for. + + * Fix unnecessarily waste in the idiomatic use of ': ${VAR=default}' + to set the default value, without enclosing it in double quotes. + + * Some platform-specific code had non-ANSI strict declarations of C + functions that do not take any parameters, which has been + corrected. + + * The internal code used to show local timezone offset is not + prepared to handle timestamps beyond year 2100, and gave a + bogus offset value to the caller. Use a more benign looking + +0000 instead and let "git log" going in such a case, instead + of aborting. + + * One among four invocations of readlink(1) in our test suite has + been rewritten so that the test can run on systems without the + command (others are in valgrind test framework and t9802). + + * t/perf needs /usr/bin/time with GNU extension; the invocation of it + is updated to "gtime" on Darwin. + + * A bug, which caused "git p4" while running under verbose mode to + report paths that are omitted due to branch prefix incorrectly, has + been fixed; the command said "Ignoring file outside of prefix" for + paths that are _inside_. + + * The top level documentation "git help git" still pointed at the + documentation set hosted at now-defunct google-code repository. + Update it to point to https://git.github.io/htmldocs/git.html + instead. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.9.2.txt b/Documentation/RelNotes/2.9.2.txt new file mode 100644 index 0000000000..2620003dcf --- /dev/null +++ b/Documentation/RelNotes/2.9.2.txt @@ -0,0 +1,13 @@ +Git v2.9.2 Release Notes +======================== + +Fixes since v2.9.1 +------------------ + + * A fix merged to v2.9.1 had a few tests that are not meant to be + run on platforms without 64-bit long, which caused unnecessary + test failures on them because we didn't detect the platform and + skip them. These tests are now skipped on platforms that they + are not applicable to. + +No other change is included in this update. diff --git a/Documentation/RelNotes/2.9.3.txt b/Documentation/RelNotes/2.9.3.txt new file mode 100644 index 0000000000..695b86f612 --- /dev/null +++ b/Documentation/RelNotes/2.9.3.txt @@ -0,0 +1,170 @@ +Git v2.9.3 Release Notes +======================== + +Fixes since v2.9.2 +------------------ + + * A helper function that takes the contents of a commit object and + finds its subject line did not ignore leading blank lines, as is + commonly done by other codepaths. Make it ignore leading blank + lines to match. + + * Git does not know what the contents in the index should be for a + path added with "git add -N" yet, so "git grep --cached" should not + show hits (or show lack of hits, with -L) in such a path, but that + logic does not apply to "git grep", i.e. searching in the working + tree files. But we did so by mistake, which has been corrected. + + * "git rebase -i --autostash" did not restore the auto-stashed change + when the operation was aborted. + + * "git commit --amend --allow-empty-message -S" for a commit without + any message body could have misidentified where the header of the + commit object ends. + + * More mark-up updates to typeset strings that are expected to + literally typed by the end user in fixed-width font. + + * For a long time, we carried an in-code comment that said our + colored output would work only when we use fprintf/fputs on + Windows, which no longer is the case for the past few years. + + * "gc.autoPackLimit" when set to 1 should not trigger a repacking + when there is only one pack, but the code counted poorly and did + so. + + * One part of "git am" had an oddball helper function that called + stuff from outside "his" as opposed to calling what we have "ours", + which was not gender-neutral and also inconsistent with the rest of + the system where outside stuff is usuall called "theirs" in + contrast to "ours". + + * The test framework learned a new helper test_match_signal to + check an exit code from getting killed by an expected signal. + + * "git blame -M" missed a single line that was moved within the file. + + * Fix recently introduced codepaths that are involved in parallel + submodule operations, which gave up on reading too early, and + could have wasted CPU while attempting to write under a corner + case condition. + + * "git grep -i" has been taught to fold case in non-ascii locales + correctly. + + * A test that unconditionally used "mktemp" learned that the command + is not necessarily available everywhere. + + * "git blame file" allowed the lineage of lines in the uncommitted, + unadded contents of "file" to be inspected, but it refused when + "file" did not appear in the current commit. When "file" was + created by renaming an existing file (but the change has not been + committed), this restriction was unnecessarily tight. + + * "git add -N dir/file && git write-tree" produced an incorrect tree + when there are other paths in the same directory that sorts after + "file". + + * "git fetch http://user:pass@host/repo..." scrubbed the userinfo + part, but "git push" didn't. + + * An age old bug that caused "git diff --ignore-space-at-eol" + misbehave has been fixed. + + * "git notes merge" had a code to see if a path exists (and fails if + it does) and then open the path for writing (when it doesn't). + Replace it with open with O_EXCL. + + * "git pack-objects" and "git index-pack" mostly operate with off_t + when talking about the offset of objects in a packfile, but there + were a handful of places that used "unsigned long" to hold that + value, leading to an unintended truncation. + + * Recent update to "git daemon" tries to enable the socket-level + KEEPALIVE, but when it is spawned via inetd, the standard input + file descriptor may not necessarily be connected to a socket. + Suppress an ENOTSOCK error from setsockopt(). + + * Recent FreeBSD stopped making perl available at /usr/bin/perl; + switch the default the built-in path to /usr/local/bin/perl on not + too ancient FreeBSD releases. + + * "git status" learned to suggest "merge --abort" during a conflicted + merge, just like it already suggests "rebase --abort" during a + conflicted rebase. + + * The .c/.h sources are marked as such in our .gitattributes file so + that "git diff -W" and friends would work better. + + * Existing autoconf generated test for the need to link with pthread + library did not check all the functions from pthread libraries; + recent FreeBSD has some functions in libc but not others, and we + mistakenly thought linking with libc is enough when it is not. + + * Allow http daemon tests in Travis CI tests. + + * Users of the parse_options_concat() API function need to allocate + extra slots in advance and fill them with OPT_END() when they want + to decide the set of supported options dynamically, which makes the + code error-prone and hard to read. This has been corrected by tweaking + the API to allocate and return a new copy of "struct option" array. + + * The use of strbuf in "git rm" to build filename to remove was a bit + suboptimal, which has been fixed. + + * "git commit --help" said "--no-verify" is only about skipping the + pre-commit hook, and failed to say that it also skipped the + commit-msg hook. + + * "git merge" in Git v2.9 was taught to forbid merging an unrelated + lines of history by default, but that is exactly the kind of thing + the "--rejoin" mode of "git subtree" (in contrib/) wants to do. + "git subtree" has been taught to use the "--allow-unrelated-histories" + option to override the default. + + * The build procedure for "git persistent-https" helper (in contrib/) + has been updated so that it can be built with more recent versions + of Go. + + * There is an optimization used in "git diff $treeA $treeB" to borrow + an already checked-out copy in the working tree when it is known to + be the same as the blob being compared, expecting that open/mmap of + such a file is faster than reading it from the object store, which + involves inflating and applying delta. This however kicked in even + when the checked-out copy needs to go through the convert-to-git + conversion (including the clean filter), which defeats the whole + point of the optimization. The optimization has been disabled when + the conversion is necessary. + + * "git -c grep.patternType=extended log --basic-regexp" misbehaved + because the internal API to access the grep machinery was not + designed well. + + * Windows port was failing some tests in t4130, due to the lack of + inum in the returned values by its lstat(2) emulation. + + * The characters in the label shown for tags/refs for commits in + "gitweb" output are now properly escaped for proper HTML output. + + * FreeBSD can lie when asked mtime of a directory, which made the + untracked cache code to fall back to a slow-path, which in turn + caused tests in t7063 to fail because it wanted to verify the + behaviour of the fast-path. + + * Squelch compiler warnings for netmalloc (in compat/) library. + + * The API documentation for hashmap was unclear if hashmap_entry + can be safely discarded without any other consideration. State + that it is safe to do so. + + * Not-so-recent rewrite of "git am" that started making internal + calls into the commit machinery had an unintended regression, in + that no matter how many seconds it took to apply many patches, the + resulting committer timestamp for the resulting commits were all + the same. + + * "git difftool <paths>..." started in a subdirectory failed to + interpret the paths relative to that directory, which has been + fixed. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 98fc4cc1d0..e8ad978824 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -61,23 +61,28 @@ Make sure that you have tests for the bug you are fixing. See t/README for guidance. When adding a new feature, make sure that you have new tests to show -the feature triggers the new behaviour when it should, and to show the -feature does not trigger when it shouldn't. Also make sure that the -test suite passes after your commit. Do not forget to update the -documentation to describe the updated behaviour. - -Speaking of the documentation, it is currently a liberal mixture of US -and UK English norms for spelling and grammar, which is somewhat -unfortunate. A huge patch that touches the files all over the place -only to correct the inconsistency is not welcome, though. Potential -clashes with other changes that can result from such a patch are not -worth it. We prefer to gradually reconcile the inconsistencies in -favor of US English, with small and easily digestible patches, as a -side effect of doing some other real work in the vicinity (e.g. -rewriting a paragraph for clarity, while turning en_UK spelling to -en_US). Obvious typographical fixes are much more welcomed ("teh -> -"the"), preferably submitted as independent patches separate from -other documentation changes. +the feature triggers the new behavior when it should, and to show the +feature does not trigger when it shouldn't. After any code change, make +sure that the entire test suite passes. + +If you have an account at GitHub (and you can get one for free to work +on open source projects), you can use their Travis CI integration to +test your changes on Linux, Mac (and hopefully soon Windows). See +GitHub-Travis CI hints section for details. + +Do not forget to update the documentation to describe the updated +behavior and make sure that the resulting documentation set formats +well. It is currently a liberal mixture of US and UK English norms for +spelling and grammar, which is somewhat unfortunate. A huge patch that +touches the files all over the place only to correct the inconsistency +is not welcome, though. Potential clashes with other changes that can +result from such a patch are not worth it. We prefer to gradually +reconcile the inconsistencies in favor of US English, with small and +easily digestible patches, as a side effect of doing some other real +work in the vicinity (e.g. rewriting a paragraph for clarity, while +turning en_UK spelling to en_US). Obvious typographical fixes are much +more welcomed ("teh -> "the"), preferably submitted as independent +patches separate from other documentation changes. Oh, another thing. We are picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped @@ -370,6 +375,47 @@ Know the status of your patch after submission entitled "What's cooking in git.git" and "What's in git.git" giving the status of various proposed changes. +-------------------------------------------------- +GitHub-Travis CI hints + +With an account at GitHub (you can get one for free to work on open +source projects), you can use Travis CI to test your changes on Linux, +Mac (and hopefully soon Windows). You can find a successful example +test build here: https://travis-ci.org/git/git/builds/120473209 + +Follow these steps for the initial setup: + + (1) Fork https://github.com/git/git to your GitHub account. + You can find detailed instructions how to fork here: + https://help.github.com/articles/fork-a-repo/ + + (2) Open the Travis CI website: https://travis-ci.org + + (3) Press the "Sign in with GitHub" button. + + (4) Grant Travis CI permissions to access your GitHub account. + You can find more information about the required permissions here: + https://docs.travis-ci.com/user/github-oauth-scopes + + (5) Open your Travis CI profile page: https://travis-ci.org/profile + + (6) Enable Travis CI builds for your Git fork. + +After the initial setup, Travis CI will run whenever you push new changes +to your fork of Git on GitHub. You can monitor the test state of all your +branches here: https://travis-ci.org/<Your GitHub handle>/git/branches + +If a branch did not pass all test cases then it is marked with a red +cross. In that case you can click on the failing Travis CI job and +scroll all the way down in the log. Find the line "<-- Click here to see +detailed test output!" and click on the triangle next to the log line +number to expand the detailed test output. Here is such a failing +example: https://travis-ci.org/git/git/jobs/122676187 + +Fix the problem and push your fix to your Git fork. This will trigger +a new Travis CI build to ensure all tests pass. + + ------------------------------------------------ MUA specific hints diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 760eab7428..02cb6845cd 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -69,6 +69,13 @@ include::line-range-format.txt[] iso format is used. For supported values, see the discussion of the --date option at linkgit:git-log[1]. +--[no-]progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal. This flag + enables progress reporting even if not attached to a + terminal. Can't use `--progress` together with `--porcelain` + or `--incremental`. + -M|<num>|:: Detect moved or copied lines within a file. When a commit moves or copies a block of lines (e.g. the original file diff --git a/Documentation/config.txt b/Documentation/config.txt index f61788668e..f4721a048b 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -81,13 +81,16 @@ Includes You can include one config file from another by setting the special `include.path` variable to the name of the file to be included. The +variable takes a pathname as its value, and is subject to tilde +expansion. + +The included file is expanded immediately, as if its contents had been found at the location of the include directive. If the value of the `include.path` variable is a relative path, the path is considered to be relative to the configuration file in which the include directive was -found. The value of `include.path` is subject to tilde expansion: `~/` -is expanded to the value of `$HOME`, and `~user/` to the specified -user's home directory. See below for examples. +found. See below for examples. + Example ~~~~~~~ @@ -114,7 +117,7 @@ Example [include] path = /path/to/foo.inc ; include by absolute path path = foo ; expand "foo" relative to the current file - path = ~/foo ; expand "foo" in your $HOME directory + path = ~/foo ; expand "foo" in your `$HOME` directory Values @@ -137,7 +140,7 @@ boolean:: false;; Boolean false can be spelled as `no`, `off`, `false`, or `0`. + -When converting value to the canonical form using '--bool' type +When converting value to the canonical form using `--bool` type specifier; 'git config' will ensure that the output is "true" or "false" (spelled in lowercase). @@ -169,6 +172,13 @@ thing on the same output line (e.g. opening parenthesis before the list of branch names in `log --decorate` output) is set to be painted with `bold` or some other attribute. +pathname:: + A variable that takes a pathname value can be given a + string that begins with "`~/`" or "`~user/`", and the usual + tilde expansion happens to such a string: `~/` + is expanded to the value of `$HOME`, and `~user/` to the + specified user's home directory. + Variables ~~~~~~~~~ @@ -269,6 +279,12 @@ See linkgit:git-update-index[1]. + The default is true (when core.filemode is not specified in the config file). +core.hideDotFiles:: + (Windows-only) If true, mark newly-created directories and files whose + name starts with a dot as hidden. If 'dotGitOnly', only the `.git/` + directory is hidden, but no other files starting with a dot. The + default mode is 'dotGitOnly'. + core.ignoreCase:: If true, this option enables various workarounds to enable Git to work better on filesystems that are not case sensitive, @@ -308,6 +324,15 @@ core.trustctime:: crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. +core.untrackedCache:: + Determines what to do about the untracked cache feature of the + index. It will be kept, if this variable is unset or set to + `keep`. It will automatically be added if set to `true`. And + it will automatically be removed, if set to `false`. Before + setting it to `true`, you should check that mtime is working + properly on your system. + See linkgit:git-update-index[1]. `keep` by default. + core.checkStat:: Determines which stat fields to match between the index and work tree. The user can set this to 'default' or @@ -328,9 +353,9 @@ core.quotePath:: core.eol:: Sets the line ending type to use in the working directory for - files that have the `text` property set. Alternatives are - 'lf', 'crlf' and 'native', which uses the platform's native - line ending. The default value is `native`. See + files that have the `text` property set when core.autocrlf is false. + Alternatives are 'lf', 'crlf' and 'native', which uses the platform's + native line ending. The default value is `native`. See linkgit:gitattributes[5] for more information on end-of-line conversion. @@ -380,13 +405,11 @@ file with mixed line endings would be reported by the `core.safecrlf` mechanism. core.autocrlf:: - Setting this variable to "true" is almost the same as setting - the `text` attribute to "auto" on all files except that text - files are not guaranteed to be normalized: files that contain - `CRLF` in the repository will not be touched. Use this - setting if you want to have `CRLF` line endings in your - working directory even though the repository does not have - normalized line endings. This variable can be set to 'input', + Setting this variable to "true" is the same as setting + the `text` attribute to "auto" on all files and core.eol to "crlf". + Set to true if you want to have `CRLF` line endings in your + working directory and the repository has LF line endings. + This variable can be set to 'input', in which case no output conversion is performed. core.symlinks:: @@ -409,7 +432,7 @@ core.gitProxy:: may be set multiple times and is matched in the given order; the first match wins. + -Can be overridden by the 'GIT_PROXY_COMMAND' environment variable +Can be overridden by the `GIT_PROXY_COMMAND` environment variable (which always applies universally, without the special "for" handling). + @@ -453,10 +476,10 @@ false), while all other repositories are assumed to be bare (bare core.worktree:: Set the path to the root of the working tree. - If GIT_COMMON_DIR environment variable is set, core.worktree + If `GIT_COMMON_DIR` environment variable is set, core.worktree is ignored and not used for determining the root of working tree. - This can be overridden by the GIT_WORK_TREE environment - variable and the '--work-tree' command-line option. + This can be overridden by the `GIT_WORK_TREE` environment + variable and the `--work-tree` command-line option. The value can be an absolute path or relative to the path to the .git directory, which is either specified by --git-dir or GIT_DIR, or automatically discovered. @@ -477,10 +500,10 @@ repository's usual working tree). core.logAllRefUpdates:: Enable the reflog. Updates to a ref <ref> is logged to the file - "$GIT_DIR/logs/<ref>", by appending the new and old + "`$GIT_DIR/logs/<ref>`", by appending the new and old SHA-1, the date/time and the reason of the update, but only when the file exists. If this configuration - variable is set to true, missing "$GIT_DIR/logs/<ref>" + variable is set to true, missing "`$GIT_DIR/logs/<ref>`" file is automatically created for branch heads (i.e. under refs/heads/), remote refs (i.e. under refs/remotes/), note refs (i.e. under refs/notes/), and the symbolic ref HEAD. @@ -520,7 +543,7 @@ core.compression:: -1 is the zlib default. 0 means no compression, and 1..9 are various speed/size tradeoffs, 9 being slowest. If set, this provides a default to other compression variables, - such as 'core.looseCompression' and 'pack.compression'. + such as `core.looseCompression` and `pack.compression`. core.looseCompression:: An integer -1..9, indicating the compression level for objects that @@ -584,20 +607,19 @@ be delta compressed, but larger binary media files won't be. Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesFile:: - In addition to '.gitignore' (per-directory) and - '.git/info/exclude', Git looks into this file for patterns - of files which are not meant to be tracked. "`~/`" is expanded - to the value of `$HOME` and "`~user/`" to the specified user's - home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. - If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + Specifies the pathname to the file that contains patterns to + describe paths that are not meant to be tracked, in addition + to '.gitignore' (per-directory) and '.git/info/exclude'. + Defaults to `$XDG_CONFIG_HOME/git/ignore`. + If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` is used instead. See linkgit:gitignore[5]. core.askPass:: Some commands (e.g. svn and http interfaces) that interactively ask for a password can be told to use an external program given - via the value of this variable. Can be overridden by the 'GIT_ASKPASS' + via the value of this variable. Can be overridden by the `GIT_ASKPASS` environment variable. If not set, fall back to the value of the - 'SSH_ASKPASS' environment variable or, failing that, a simple password + `SSH_ASKPASS` environment variable or, failing that, a simple password prompt. The external program shall be given a suitable prompt as command-line argument and write the password on its STDOUT. @@ -606,8 +628,25 @@ core.attributesFile:: '.git/info/attributes', Git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same way as for `core.excludesFile`. Its default value is - $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not - set or empty, $HOME/.config/git/attributes is used instead. + `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not + set or empty, `$HOME/.config/git/attributes` is used instead. + +core.hooksPath:: + By default Git will look for your hooks in the + '$GIT_DIR/hooks' directory. Set this to different path, + e.g. '/etc/git/hooks', and Git will try to find your hooks in + that directory, e.g. '/etc/git/hooks/pre-receive' instead of + in '$GIT_DIR/hooks/pre-receive'. ++ +The path can be either absolute or relative. A relative path is +taken as relative to the directory where the hooks are run (see +the "DESCRIPTION" section of linkgit:githooks[5]). ++ +This configuration variable is useful in cases where you'd like to +centrally configure your Git hooks instead of configuring them on a +per-repository basis, or as a more flexible and centralized +alternative to having an `init.templateDir` where you've changed +default hooks. core.editor:: Commands such as `commit` and `tag` that lets you edit @@ -723,7 +762,7 @@ core.notesRef:: notes should be printed. + This setting defaults to "refs/notes/commits", and it can be overridden by -the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. +the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in @@ -738,7 +777,7 @@ core.abbrev:: add.ignoreErrors:: add.ignore-errors (deprecated):: Tells 'git add' to continue adding files when some files cannot be - added due to indexing errors. Equivalent to the '--ignore-errors' + added due to indexing errors. Equivalent to the `--ignore-errors` option of linkgit:git-add[1]. `add.ignore-errors` is deprecated, as it does not follow the usual naming convention for configuration variables. @@ -759,14 +798,14 @@ it will be treated as a shell command. For example, defining "gitk --all --not ORIG_HEAD". Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. -'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' +`GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix' from the original current directory. See linkgit:git-rev-parse[1]. am.keepcr:: If true, git-am will call git-mailsplit for patches in mbox format - with parameter '--keep-cr'. In this case git-mailsplit will + with parameter `--keep-cr`. In this case git-mailsplit will not remove `\r` from lines ending with `\r\n`. Can be overridden - by giving '--no-keep-cr' from the command line. + by giving `--no-keep-cr` from the command line. See linkgit:git-am[1], linkgit:git-mailsplit[1]. am.threeWay:: @@ -779,7 +818,7 @@ am.threeWay:: apply.ignoreWhitespace:: When set to 'change', tells 'git apply' to ignore changes in - whitespace, in the same way as the '--ignore-space-change' + whitespace, in the same way as the `--ignore-space-change` option. When set to one of: no, none, never, false tells 'git apply' to respect all whitespace differences. @@ -787,7 +826,7 @@ apply.ignoreWhitespace:: apply.whitespace:: Tells 'git apply' how to handle whitespaces, in the same way - as the '--whitespace' option. See linkgit:git-apply[1]. + as the `--whitespace` option. See linkgit:git-apply[1]. branch.autoSetupMerge:: Tells 'git branch' and 'git checkout' to set up new branches @@ -870,6 +909,8 @@ When preserve, also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + +When the value is `interactive`, the rebase is run in interactive mode. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -887,7 +928,7 @@ browser.<tool>.cmd:: browser.<tool>.path:: Override the path for the given tool that may be used to - browse HTML help (see '-w' option in linkgit:git-help[1]) or a + browse HTML help (see `-w` option in linkgit:git-help[1]) or a working repository in gitweb (see linkgit:git-instaweb[1]). clean.requireForce:: @@ -1095,15 +1136,19 @@ commit.status:: message. Defaults to true. commit.template:: - Specify a file to use as the template for new commit messages. - "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the - specified user's home directory. + Specify the pathname of a file to use as the template for + new commit messages. + +commit.verbose:: + A boolean or int to specify the level of verbose with `git commit`. + See linkgit:git-commit[1]. credential.helper:: Specify an external helper to be called when a username or password credential is needed; the helper may consult external - storage to avoid prompting the user for the credentials. See - linkgit:gitcredentials[7] for details. + storage to avoid prompting the user for the credentials. Note + that multiple helpers may be defined. See linkgit:gitcredentials[7] + for details. credential.useHttpPath:: When acquiring credentials, consider the "path" component of an http @@ -1243,6 +1288,14 @@ format.coverLetter:: format-patch is invoked, but in addition can be set to "auto", to generate a cover-letter only when there's more than one patch. +format.outputDirectory:: + Set a custom directory to store the resulting files instead of the + current working directory. + +format.useAutoBase:: + A boolean value which lets you enable the `--base=auto` option of + format-patch by default. + filter.<driver>.clean:: The command which is used to convert the content of a worktree file to a blob upon checkin. See linkgit:gitattributes[5] for @@ -1319,7 +1372,7 @@ gc.worktreePruneExpire:: 'git worktree prune --expire 3.months.ago'. This config variable can be used to set a different grace period. The value "now" may be used to disable the grace - period and prune $GIT_DIR/worktrees immediately, or "never" + period and prune `$GIT_DIR/worktrees` immediately, or "never" may be used to suppress pruning. gc.reflogExpire:: @@ -1365,24 +1418,24 @@ gitcvs.logFile:: gitcvs.usecrlfattr:: If true, the server will look up the end-of-line conversion - attributes for files to determine the '-k' modes to use. If + attributes for files to determine the `-k` modes to use. If the attributes force Git to treat a file as text, - the '-k' mode will be left blank so CVS clients will + the `-k` mode will be left blank so CVS clients will treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging the client might otherwise do. If the attributes do not allow - the file type to be determined, then 'gitcvs.allBinary' is + the file type to be determined, then `gitcvs.allBinary` is used. See linkgit:gitattributes[5]. gitcvs.allBinary:: - This is used if 'gitcvs.usecrlfattr' does not resolve + This is used if `gitcvs.usecrlfattr` does not resolve the correct '-kb' mode to use. If true, all unresolved files are sent to the client in mode '-kb'. This causes the client to treat them as binary files, which suppresses any newline munging it otherwise might do. Alternatively, if it is set to "guess", then the contents of the file are examined to decide if - it is binary, similar to 'core.autocrlf'. + it is binary, similar to `core.autocrlf`. gitcvs.dbName:: Database used by git-cvsserver to cache revision information @@ -1401,7 +1454,7 @@ gitcvs.dbDriver:: See linkgit:git-cvsserver[1]. gitcvs.dbUser, gitcvs.dbPass:: - Database user and password. Only useful if setting 'gitcvs.dbDriver', + Database user and password. Only useful if setting `gitcvs.dbDriver`, since SQLite has no concept of database users and/or passwords. 'gitcvs.dbUser' supports variable substitution (see linkgit:git-cvsserver[1] for details). @@ -1413,8 +1466,8 @@ gitcvs.dbTableNamePrefix:: linkgit:git-cvsserver[1] for details). Any non-alphabetic characters will be replaced with underscores. -All gitcvs variables except for 'gitcvs.usecrlfattr' and -'gitcvs.allBinary' can also be specified as +All gitcvs variables except for `gitcvs.usecrlfattr` and +`gitcvs.allBinary` can also be specified as 'gitcvs.<access_method>.<varname>' (where 'access_method' is one of "ext" and "pserver") to make them apply only for the given access method. @@ -1437,27 +1490,35 @@ gitweb.snapshot:: See linkgit:gitweb.conf[5] for description. grep.lineNumber:: - If set to true, enable '-n' option by default. + If set to true, enable `-n` option by default. grep.patternType:: Set the default matching behavior. Using a value of 'basic', 'extended', - 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', - '--fixed-strings', or '--perl-regexp' option accordingly, while the + 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, + `--fixed-strings`, or `--perl-regexp` option accordingly, while the value 'default' will return to the default matching behavior. grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. This - option is ignored when the 'grep.patternType' option is set to a value + If set to true, enable `--extended-regexp` option by default. This + option is ignored when the `grep.patternType` option is set to a value other than 'default'. +grep.threads:: + Number of grep worker threads to use. + See `grep.threads` in linkgit:git-grep[1] for more information. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. + gpg.program:: - Use this custom program instead of "gpg" found on $PATH when + Use this custom program instead of "`gpg`" found on `$PATH` when making or verifying a PGP signature. The program must support the same command-line interface as GPG, namely, to verify a detached - signature, "gpg --verify $file - <$signature" is run, and the + signature, "`gpg --verify $file - <$signature`" is run, and the program is expected to signal a good signature by exiting with code 0, and to generate an ASCII-armored detached signature, the - standard input of "gpg -bsau $key" is fed with the contents to be + standard input of "`gpg -bsau $key`" is fed with the contents to be signed, and the program is expected to send the result to its standard output. @@ -1470,7 +1531,7 @@ gui.diffContext:: made by the linkgit:git-gui[1]. The default is "5". gui.displayUntracked:: - Determines if linkgit::git-gui[1] shows untracked files + Determines if linkgit:git-gui[1] shows untracked files in the file list. The default is "true". gui.encoding:: @@ -1524,7 +1585,7 @@ guitool.<name>.cmd:: of the linkgit:git-gui[1] `Tools` menu is invoked. This option is mandatory for every tool. The command is executed from the root of the working directory, and in the environment it receives the name of - the tool as 'GIT_GUITOOL', the name of the currently selected file as + the tool as `GIT_GUITOOL`, the name of the currently selected file as 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if the head is detached, 'CUR_BRANCH' is empty). @@ -1545,7 +1606,7 @@ guitool.<name>.confirm:: guitool.<name>.argPrompt:: Request a string argument from the user, and pass it to the tool - through the 'ARGS' environment variable. Since requesting an + through the `ARGS` environment variable. Since requesting an argument implies confirmation, the 'confirm' option has no effect if this is enabled. If the option is set to 'true', 'yes', or '1', the dialog uses a built-in generic prompt; otherwise the exact @@ -1553,7 +1614,7 @@ guitool.<name>.argPrompt:: guitool.<name>.revPrompt:: Request a single valid revision from the user, and set the - 'REVISION' environment variable. In other aspects this option + `REVISION` environment variable. In other aspects this option is similar to 'argPrompt', and can be used together with it. guitool.<name>.revUnmerged:: @@ -1596,16 +1657,54 @@ help.htmlPath:: http.proxy:: Override the HTTP proxy, normally configured using the 'http_proxy', - 'https_proxy', and 'all_proxy' environment variables (see - `curl(1)`). This can be overridden on a per-remote basis; see - remote.<name>.proxy + 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In + addition to the syntax understood by curl, it is possible to specify a + proxy string with a user name but no password, in which case git will + attempt to acquire one in the same way it does for other credentials. See + linkgit:gitcredentials[7] for more information. The syntax thus is + '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden + on a per-remote basis; see remote.<name>.proxy + +http.proxyAuthMethod:: + Set the method with which to authenticate against the HTTP proxy. This + only takes effect if the configured proxy string contains a user name part + (i.e. is of the form 'user@host' or 'user@host:port'). This can be + overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. + Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment + variable. Possible values are: ++ +-- +* `anyauth` - Automatically pick a suitable authentication method. It is + assumed that the proxy answers an unauthenticated request with a 407 + status code and one or more Proxy-authenticate headers with supported + authentication methods. This is the default. +* `basic` - HTTP Basic authentication +* `digest` - HTTP Digest authentication; this prevents the password from being + transmitted to the proxy in clear text +* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option + of `curl(1)`) +* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) +-- + +http.emptyAuth:: + Attempt authentication without seeking a username or password. This + can be used to attempt GSS-Negotiate authentication without specifying + a username in the URL, as libcurl normally requires a username for + authentication. + +http.extraHeader:: + Pass an additional HTTP header when communicating with a server. If + more than one such entry exists, all of them are added as extra + headers. To allow overriding the settings inherited from the system + config, an empty value will reset the extra headers to the empty list. http.cookieFile:: - File containing previously stored cookie lines which should be used + The pathname of a file containing previously stored cookie lines, + which should be used in the Git http session, if they match the server. The file format of the file to read cookies from should be plain HTTP headers or - the Netscape/Mozilla cookie file format (see linkgit:curl[1]). - NOTE that the file specified with http.cookieFile is only used as + the Netscape/Mozilla cookie file format (see `curl(1)`). + NOTE that the file specified with http.cookieFile is used only as input unless http.saveCookies is set. http.saveCookies:: @@ -1630,9 +1729,9 @@ http.sslVersion:: - tlsv1.2 + -Can be overridden by the 'GIT_SSL_VERSION' environment variable. +Can be overridden by the `GIT_SSL_VERSION` environment variable. To force git to use libcurl's default ssl version and ignore any -explicit http.sslversion option, set 'GIT_SSL_VERSION' to the +explicit http.sslversion option, set `GIT_SSL_VERSION` to the empty string. http.sslCipherList:: @@ -1643,41 +1742,49 @@ http.sslCipherList:: option; see the libcurl documentation for more details on the format of this list. + -Can be overridden by the 'GIT_SSL_CIPHER_LIST' environment variable. +Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable. To force git to use libcurl's default cipher list and ignore any -explicit http.sslCipherList option, set 'GIT_SSL_CIPHER_LIST' to the +explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the empty string. http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment + over HTTPS. Can be overridden by the `GIT_SSL_NO_VERIFY` environment variable. http.sslCert:: File containing the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment + over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment variable. http.sslKey:: File containing the SSL private key when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment + over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment variable. http.sslCertPasswordProtected:: Enable Git's password prompt for the SSL certificate. Otherwise OpenSSL will prompt the user, possibly many times, if the certificate or private key is encrypted. Can be overridden by the - 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable. + `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable. http.sslCAInfo:: File containing the certificates to verify the peer with when fetching or pushing over HTTPS. Can be overridden by the - 'GIT_SSL_CAINFO' environment variable. + `GIT_SSL_CAINFO` environment variable. http.sslCAPath:: Path containing files with the CA certificates to verify the peer with when fetching or pushing over HTTPS. Can be overridden - by the 'GIT_SSL_CAPATH' environment variable. + by the `GIT_SSL_CAPATH` environment variable. + +http.pinnedpubkey:: + Public key of the https service. It may either be the filename of + a PEM or DER encoded public key file or a string starting with + 'sha256//' followed by the base64 encoded sha256 hash of the + public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will + exit with an error if this option is set but not supported by + cURL. http.sslTry:: Attempt to use AUTH SSL/TLS and encrypted data transfers @@ -1689,7 +1796,7 @@ http.sslTry:: http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden - by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. + by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5. http.minSessions:: The number of curl sessions (counted across slots) to be kept across @@ -1708,13 +1815,13 @@ http.postBuffer:: http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. - Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and - 'GIT_HTTP_LOW_SPEED_TIME' environment variables. + Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and + `GIT_HTTP_LOW_SPEED_TIME` environment variables. http.noEPSV:: A boolean which disables using of EPSV ftp command by curl. This can helpful with some "poor" ftp servers which don't - support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' + support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV` environment variable. Default is false (curl will use EPSV). http.userAgent:: @@ -1724,7 +1831,7 @@ http.userAgent:: such as Mozilla/4.0. This may be necessary, for instance, if connecting through a firewall that restricts HTTP connections to a set of common USER_AGENT strings (but not including those like git/1.7.1). - Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. + Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable. http.<url>.*:: Any of the http.* options above can be applied selectively to some URLs. @@ -1824,6 +1931,14 @@ interactive.singleKey:: setting is silently ignored if portable keystroke input is not available; requires the Perl module Term::ReadKey. +interactive.diffFilter:: + When an interactive command (such as `git add --patch`) shows + a colorized diff, git will pipe the diff through the shell + command defined by this configuration variable. The command may + mark up the diff further for human consumption, provided that it + retains a one-to-one correspondence with the lines in the + original diff. Defaults to disabled (no filtering). + log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may @@ -1839,7 +1954,10 @@ log.decorate:: command. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the full ref name (including prefix) will be printed. - This is the same as the log commands '--decorate' option. + If 'auto' is specified, then if the output is going to a terminal, + the ref names are shown as if 'short' were given, otherwise no ref + names are shown. This is the same as the `--decorate` option + of the `git log`. log.follow:: If `true`, `git log` will act as if the `--follow` option was used when @@ -2074,7 +2192,7 @@ pack.indexVersion:: larger than 2 GB. + If you have an old Git that does not understand the version 2 `*.idx` file, -cloning or fetching over a non native protocol (e.g. "http" and "rsync") +cloning or fetching over a non native protocol (e.g. "http") that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your older version of Git. If the `*.pack` file is smaller than 2 GB, however, @@ -2085,8 +2203,11 @@ pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol is unaffected. It can be overridden by the `--max-pack-size` - option of linkgit:git-repack[1]. The minimum size allowed is - limited to 1 MiB. The default is unlimited. + option of linkgit:git-repack[1]. Reaching this limit results + in the creation of multiple packfiles; which in turn prevents + bitmaps from being created. + The minimum size allowed is limited to 1 MiB. + The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are supported. @@ -2149,6 +2270,8 @@ When preserve, also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + +When the value is `interactive`, the rebase is run in interactive mode. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -2216,16 +2339,16 @@ new default). -- push.followTags:: - If set to true enable '--follow-tags' option by default. You + If set to true enable `--follow-tags` option by default. You may override this configuration at time of push by specifying - '--no-follow-tags'. + `--no-follow-tags`. push.gpgSign:: May be set to a boolean value, or the string 'if-asked'. A true - value causes all pushes to be GPG signed, as if '--signed' is + value causes all pushes to be GPG signed, as if `--signed` is passed to linkgit:git-push[1]. The string 'if-asked' causes pushes to be signed if the server supports it, as if - '--signed=if-asked' is passed to 'git push'. A false value may + `--signed=if-asked` is passed to 'git push'. A false value may override a value from a lower-priority config file. An explicit command-line flag always overrides this config option. @@ -2248,7 +2371,7 @@ rebase.stat:: rebase. False by default. rebase.autoSquash:: - If set to true enable '--autosquash' option by default. + If set to true enable `--autosquash` option by default. rebase.autoStash:: When set to true, automatically create a temporary stash @@ -2407,6 +2530,11 @@ remote.<name>.proxy:: the proxy to use for that remote. Set to the empty string to disable proxying for that remote. +remote.<name>.proxyAuthMethod:: + For remotes that require curl (http, https and ftp), the method to use for + authenticating against the proxy in use (probably set in + `remote.<name>.proxy`). See `http.proxyAuthMethod`. + remote.<name>.fetch:: The default set of "refspec" for linkgit:git-fetch[1]. See linkgit:git-fetch[1]. @@ -2479,8 +2607,9 @@ repack.writeBitmaps:: objects to disk (e.g., when `git repack -a` is run). This index can speed up the "counting objects" phase of subsequent packs created for clones and fetches, at the cost of some disk - space and extra time spent on the initial repack. Defaults to - false. + space and extra time spent on the initial repack. This has + no effect if multiple packfiles are created. + Defaults to false. rerere.autoUpdate:: When set to true, `git-rerere` updates the index with the @@ -2499,7 +2628,7 @@ sendemail.identity:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. sendemail.smtpEncryption:: See linkgit:git-send-email[1] for description. Note that this @@ -2516,7 +2645,7 @@ sendemail.<identity>.*:: Identity-specific versions of the 'sendemail.*' parameters found below, taking precedence over those when the this identity is selected, through command-line or - 'sendemail.identity'. + `sendemail.identity`. sendemail.aliasesFile:: sendemail.aliasFileType:: @@ -2546,7 +2675,7 @@ sendemail.xmailer:: See linkgit:git-send-email[1] for description. sendemail.signedoffcc (deprecated):: - Deprecated alias for 'sendemail.signedoffbycc'. + Deprecated alias for `sendemail.signedoffbycc`. showbranch.default:: The default set of branches for linkgit:git-show-branch[1]. @@ -2660,6 +2789,17 @@ submodule.<name>.ignore:: "--ignore-submodules" option. The 'git submodule' commands are not affected by this setting. +submodule.fetchJobs:: + Specifies how many submodules are fetched/cloned at the same time. + A positive integer allows up to that number of submodules fetched + in parallel. A value of 0 will give some reasonable default. + If unset, it defaults to 1. + +tag.forceSignAnnotated:: + A boolean to specify whether annotated tags created should be GPG signed. + If `--annotate` is specified on the command line, it takes + precedence over this option. + tag.sort:: This variable controls the sort ordering of tags when displayed by linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the @@ -2767,14 +2907,24 @@ url.<base>.pushInsteadOf:: user.email:: Your email address to be recorded in any newly created commits. - Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and - 'EMAIL' environment variables. See linkgit:git-commit-tree[1]. + Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and + `EMAIL` environment variables. See linkgit:git-commit-tree[1]. user.name:: Your full name to be recorded in any newly created commits. - Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' + Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME` environment variables. See linkgit:git-commit-tree[1]. +user.useConfigOnly:: + Instruct Git to avoid trying to guess defaults for `user.email` + and `user.name`, and instead retrieve the values only from the + configuration. For example, if you have multiple email addresses + and would like to use a different one for each repository, then + with this configuration option set to `true` in the global config + along with a name, Git will prompt you to set up an email before + making new commits in a newly cloned repository. + Defaults to `false`. + user.signingKey:: If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the key you want it to automatically when creating a signed tag or diff --git a/Documentation/date-formats.txt b/Documentation/date-formats.txt index ccd1fc8122..35e8da2010 100644 --- a/Documentation/date-formats.txt +++ b/Documentation/date-formats.txt @@ -1,7 +1,7 @@ DATE FORMATS ------------ -The GIT_AUTHOR_DATE, GIT_COMMITTER_DATE environment variables +The `GIT_AUTHOR_DATE`, `GIT_COMMITTER_DATE` environment variables ifdef::git-commit[] and the `--date` option endif::git-commit[] diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index 6eaa45271c..d5a5b17d50 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -75,7 +75,7 @@ diff.ignoreSubmodules:: commands such as 'git diff-files'. 'git checkout' also honors this setting when reporting uncommitted changes. Setting it to 'all' disables the submodule summary normally shown by 'git commit' - and 'git status' when 'status.submoduleSummary' is set unless it is + and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. @@ -105,12 +105,16 @@ diff.orderFile:: diff.renameLimit:: The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option '-l'. + detection; equivalent to the 'git diff' option `-l`. diff.renames:: - Tells Git to detect renames. If set to any boolean value, it - will enable basic rename detection. If set to "copies" or - "copy", it will detect copies, as well. + Whether and how Git detects renames. If set to "false", + rename detection is disabled. If set to "true", basic rename + detection is enabled. If set to "copies" or "copy", Git will + detect copies, as well. Defaults to true. Note that this + affects only 'git diff' Porcelain like linkgit:git-diff[1] and + linkgit:git-log[1], and not lower level commands such as + linkgit:git-diff-files[1]. diff.suppressBlankEmpty:: A boolean to inhibit the standard behavior of printing a space @@ -166,6 +170,11 @@ diff.tool:: include::mergetools-diff.txt[] +diff.compactionHeuristic:: + Set this option to `true` to enable an experimental heuristic that + shifts the hunk boundary in an attempt to make the resulting + patch easier to read. + diff.algorithm:: Choose a diff algorithm. The variants are as follows: + diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index 85b08909ce..cf5262622f 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -46,11 +46,11 @@ That is, from the left to the right: . sha1 for "dst"; 0\{40\} if creation, unmerged or "look at work tree". . a space. . status, followed by optional "score" number. -. a tab or a NUL when '-z' option is used. +. a tab or a NUL when `-z` option is used. . path for "src" -. a tab or a NUL when '-z' option is used; only exists for C or R. +. a tab or a NUL when `-z` option is used; only exists for C or R. . path for "dst"; only exists for C or R. -. an LF or a NUL when '-z' option is used, to terminate the record. +. an LF or a NUL when `-z` option is used, to terminate the record. Possible status letters are: @@ -86,7 +86,7 @@ diff format for merges ---------------------- "git-diff-tree", "git-diff-files" and "git-diff --raw" -can take '-c' or '--cc' option +can take `-c` or `--cc` option to generate diff output also for merge commits. The output differs from the format described above in the following way: diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index bcf54da82a..d2a7ff56e8 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -2,11 +2,11 @@ Generating patches with -p -------------------------- When "git-diff-index", "git-diff-tree", or "git-diff-files" are run -with a '-p' option, "git diff" without the '--raw' option, or +with a `-p` option, "git diff" without the `--raw` option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file. You can customize the creation of such patches via the -GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables. +`GIT_EXTERNAL_DIFF` and the `GIT_DIFF_OPTS` environment variables. What the -p option produces is slightly different from the traditional diff format: @@ -114,11 +114,11 @@ index fabadb8,cc95eb0..4866510 ------------ 1. It is preceded with a "git diff" header, that looks like - this (when '-c' option is used): + this (when `-c` option is used): diff --combined file + -or like this (when '--cc' option is used): +or like this (when `--cc` option is used): diff --cc file diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 306b7e3604..705a873942 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -26,12 +26,12 @@ ifndef::git-format-patch[] ifdef::git-diff[] This is the default. endif::git-diff[] -endif::git-format-patch[] -s:: --no-patch:: Suppress diff output. Useful for commands like `git show` that show the patch by default, or to cancel the effect of `--patch`. +endif::git-format-patch[] -U<n>:: --unified=<n>:: @@ -63,6 +63,13 @@ ifndef::git-format-patch[] Synonym for `-p --raw`. endif::git-format-patch[] +--compaction-heuristic:: +--no-compaction-heuristic:: + These are to help debugging and tuning an experimental + heuristic (which is off by default) that shifts the hunk + boundary in an attempt to make the resulting patch easier + to read. + --minimal:: Spend extra time to make sure the smallest possible diff is produced. @@ -271,7 +278,7 @@ For example, `--word-diff-regex=.` will treat each character as a word and, correspondingly, show differences character by character. + The regex can also be set via a diff driver or configuration option, see -linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly +linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings. @@ -286,8 +293,8 @@ endif::git-format-patch[] ifndef::git-format-patch[] --check:: - Warn if changes introduce whitespace errors. What are - considered whitespace errors is controlled by `core.whitespace` + Warn if changes introduce conflict markers or whitespace errors. + What are considered whitespace errors is controlled by `core.whitespace` configuration. By default, trailing whitespaces (including lines that solely consist of whitespaces) and a space character that is immediately followed by a tab character inside the @@ -412,6 +419,9 @@ ifndef::git-format-patch[] paths are selected if there is any file that matches other criteria in the comparison; if there is no file that matches other criteria, nothing is selected. ++ +Also, these upper-case letters can be downcased to exclude. E.g. +`--diff-filter=ad` excludes added and deleted paths. -S<string>:: Look for differences that change the number of occurrences of diff --git a/Documentation/everyday.txto b/Documentation/everyday.txto index c5047d8f9b..ae555bd47e 100644 --- a/Documentation/everyday.txto +++ b/Documentation/everyday.txto @@ -1,7 +1,7 @@ Everyday Git With 20 Commands Or So =================================== -This document has been moved to linkgit:giteveryday[1]. +This document has been moved to linkgit:giteveryday[7]. Please let the owners of the referring site know so that they can update the link you clicked to get here. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 78cd2653cd..9eab1f5fa4 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -52,7 +52,7 @@ ifndef::git-pull[] -p:: --prune:: - After fetching, remove any remote-tracking references that no + Before fetching, remove any remote-tracking references that no longer exist on the remote. Tags are not subject to pruning if they are fetched only because of the default tag auto-following or due to a --tags option. However, if tags @@ -88,7 +88,7 @@ ifndef::git-pull[] to whatever else would otherwise be fetched. Using this option alone does not subject tags to pruning, even if --prune is used (though tags may be pruned anyway if they are also the - destination of an explicit refspec; see '--prune'). + destination of an explicit refspec; see `--prune`). --recurse-submodules[=yes|on-demand|no]:: This option controls if and under what conditions new commits of @@ -101,9 +101,16 @@ ifndef::git-pull[] reference to a commit that isn't already in the local submodule clone. +-j:: +--jobs=<n>:: + Number of parallel children to be used for fetching submodules. + Each will fetch from different submodules, such that fetching many + submodules will be faster. By default submodules will be fetched + one at a time. + --no-recurse-submodules:: Disable recursive fetching of submodules (this has the same effect as - using the '--recurse-submodules=no' option). + using the `--recurse-submodules=no` option). --submodule-prefix=<path>:: Prepend <path> to paths printed in informative messages @@ -130,7 +137,7 @@ endif::git-pull[] --upload-pack <upload-pack>:: When given, and the repository to fetch from is handled - by 'git fetch-pack', '--exec=<upload-pack>' is passed to + by 'git fetch-pack', `--exec=<upload-pack>` is passed to the command to specify non-default path for the command run on the other end. @@ -151,3 +158,11 @@ endif::git-pull[] by default when it is attached to a terminal, unless -q is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. + +-4:: +--ipv4:: + Use IPv4 addresses only, ignoring IPv6 addresses. + +-6:: +--ipv6:: + Use IPv6 addresses only, ignoring IPv4 addresses. diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 13cdd7f3b6..8dd9e4f052 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -198,12 +198,12 @@ When initially invoking `git am`, you give it the names of the mailboxes to process. Upon seeing the first patch that does not apply, it aborts in the middle. You can recover from this in one of two ways: -. skip the current patch by re-running the command with the '--skip' +. skip the current patch by re-running the command with the `--skip` option. . hand resolve the conflict in the working directory, and update the index file to bring it into a state that the patch should - have produced. Then run the command with the '--continue' option. + have produced. Then run the command with the `--continue` option. The command refuses to process new mailboxes until the current operation is finished, so if you decide to start over from scratch, diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index d9ed6a1a4e..8ddb207409 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -13,7 +13,7 @@ SYNOPSIS [--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse] [--allow-binary-replacement | --binary] [--reject] [-z] [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached] - [--ignore-space-change | --ignore-whitespace ] + [--ignore-space-change | --ignore-whitespace] [--whitespace=(nowarn|warn|fix|error|error-all)] [--exclude=<path>] [--include=<path>] [--directory=<root>] [--verbose] [--unsafe-paths] [<patch>...] @@ -21,6 +21,8 @@ SYNOPSIS DESCRIPTION ----------- Reads the supplied diff output (i.e. "a patch") and applies it to files. +When running from a subdirectory in a repository, patched paths +outside the directory are ignored. With the `--index` option the patch is also applied to the index, and with the `--cached` option the patch is only applied to the index. Without these options, the command applies the patch only to files, diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index c06efbd42a..e015f5b3cc 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -366,7 +366,7 @@ skip" to do the same thing. (In fact the special exit code 125 makes Or if you want more control, you can inspect the current state using for example "git bisect visualize". It will launch gitk (or "git log" -if the DISPLAY environment variable is not set) to help you find a +if the `DISPLAY` environment variable is not set) to help you find a better bisection point. Either way, if you have a string of untestable commits, it might diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 7e79aaedeb..2bb9a577a2 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -205,7 +205,7 @@ $ git bisect visualize `view` may also be used as a synonym for `visualize`. -If the 'DISPLAY' environment variable is not set, 'git log' is used +If the `DISPLAY` environment variable is not set, 'git log' is used instead. You can also give command-line options such as `-p` and `--stat`. @@ -358,7 +358,7 @@ OPTIONS --no-checkout:: + Do not checkout the new working tree at each iteration of the bisection -process. Instead just update a special reference named 'BISECT_HEAD' to make +process. Instead just update a special reference named `BISECT_HEAD` to make it point to the commit that should be tested. + This option may be useful when the test you would perform in each step diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index e6e947c808..ba5417567c 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -10,7 +10,8 @@ SYNOPSIS [verse] 'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] [-L <range>] [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] - [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file> + [--progress] [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] + [--] <file> DESCRIPTION ----------- diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 4a7037f1c8..1fe73448f3 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -39,10 +39,10 @@ named commit). With `--merged`, only branches merged into the named commit (i.e. the branches whose tip commits are reachable from the named commit) will be listed. With `--no-merged` only branches not merged into the named commit will be listed. If the <commit> argument is missing it -defaults to 'HEAD' (i.e. the tip of the current branch). +defaults to `HEAD` (i.e. the tip of the current branch). The command's second form creates a new branch head named <branchname> -which points to the current 'HEAD', or <start-point> if given. +which points to the current `HEAD`, or <start-point> if given. Note that this will create the new branch, but it will not switch the working tree to it; use "git checkout <newbranch>" to switch to the @@ -172,7 +172,7 @@ This option is only applicable in non-verbose mode. + This behavior is the default when the start point is a remote-tracking branch. Set the branch.autoSetupMerge configuration variable to `false` if you -want `git checkout` and `git branch` to always behave as if '--no-track' +want `git checkout` and `git branch` to always behave as if `--no-track` were given. Set it to `always` if you want this behavior when the start-point is either a local or remote-tracking branch. diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 0417562eb7..3a8120c3b3 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -20,7 +20,7 @@ DESCRIPTION Some workflows require that one or more branches of development on one machine be replicated on another machine, but the two machines cannot be directly connected, and therefore the interactive Git protocols (git, -ssh, rsync, http) cannot be used. This command provides support for +ssh, http) cannot be used. This command provides support for 'git fetch' and 'git pull' to operate by packaging objects and references in an archive at the originating machine, then importing those into another repository using 'git fetch' and 'git pull' diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index eb3d6945a9..18d03d8e8b 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -15,8 +15,8 @@ SYNOPSIS DESCRIPTION ----------- In its first form, the command provides the content or the type of an object in -the repository. The type is required unless '-t' or '-p' is used to find the -object type, or '-s' is used to find the object size, or '--textconv' is used +the repository. The type is required unless `-t` or `-p` is used to find the +object type, or `-s` is used to find the object size, or `--textconv` is used (which implies type "blob"). In the second form, a list of objects (separated by linefeeds) is provided on @@ -144,13 +144,13 @@ respectively print: OUTPUT ------ -If '-t' is specified, one of the <type>. +If `-t` is specified, one of the <type>. -If '-s' is specified, the size of the <object> in bytes. +If `-s` is specified, the size of the <object> in bytes. -If '-e' is specified, no output. +If `-e` is specified, no output. -If '-p' is specified, the contents of <object> are pretty-printed. +If `-p` is specified, the contents of <object> are pretty-printed. If <type> is specified, the raw (though uncompressed) contents of the <object> will be returned. diff --git a/Documentation/git-check-ignore.txt b/Documentation/git-check-ignore.txt index e94367a5ed..611754f10b 100644 --- a/Documentation/git-check-ignore.txt +++ b/Documentation/git-check-ignore.txt @@ -112,7 +112,7 @@ EXIT STATUS SEE ALSO -------- linkgit:gitignore[5] -linkgit:gitconfig[5] +linkgit:git-config[1] linkgit:git-ls-files[1] GIT diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 5e5273e073..7a2201b051 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -157,7 +157,7 @@ of it"). When creating a new branch, set up "upstream" configuration. See "--track" in linkgit:git-branch[1] for details. + -If no '-b' option is given, the name of the new branch will be +If no `-b` option is given, the name of the new branch will be derived from the remote-tracking branch, by looking at the local part of the refspec configured for the corresponding remote, and then stripping the initial part up to the "*". @@ -165,7 +165,7 @@ This would tell us to use "hack" as the local branch when branching off of "origin/hack" (or "remotes/origin/hack", or even "refs/remotes/origin/hack"). If the given name has no slash, or the above guessing results in an empty name, the guessing is aborted. You can -explicitly give a name with '-b' in such a case. +explicitly give a name with `-b` in such a case. --no-track:: Do not set up "upstream" configuration, even if the diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 6154e57238..d35d771fc8 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -47,7 +47,7 @@ OPTIONS For a more complete list of ways to spell commits, see linkgit:gitrevisions[7]. Sets of commits can be passed but no traversal is done by - default, as if the '--no-walk' option was specified, see + default, as if the `--no-walk` option was specified, see linkgit:git-rev-list[1]. Note that specifying a range will feed all <commit>... arguments to a single revision walk (see a later example that uses 'maint master..next'). @@ -128,7 +128,7 @@ effect to your index in a row. --allow-empty-message:: By default, cherry-picking a commit with an empty message will fail. - This option overrides that behaviour, allowing commits with empty + This option overrides that behavior, allowing commits with empty messages to be cherry picked. --keep-redundant-commits:: diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 641681f61a..03056dad0d 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -16,7 +16,7 @@ DESCRIPTION Cleans the working tree by recursively removing files that are not under version control, starting from the current directory. -Normally, only files unknown to Git are removed, but if the '-x' +Normally, only files unknown to Git are removed, but if the `-x` option is specified, ignored files are also removed. This can, for example, be useful to remove all build products. @@ -37,9 +37,7 @@ OPTIONS to false, 'git clean' will refuse to delete files or directories unless given -f, -n or -i. Git will refuse to delete directories with .git sub directory or file unless a second -f - is given. This affects also git submodules where the storage area - of the removed submodule under .git/modules/ is not removed until - -f is given twice. + is given. -i:: --interactive:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 789b668f77..ec41d3d698 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -14,8 +14,8 @@ SYNOPSIS [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] - [--recursive | --recurse-submodules] [--] <repository> - [<directory>] + [--recursive | --recurse-submodules] [--[no-]shallow-submodules] + [--jobs <n>] [--] <repository> [<directory>] DESCRIPTION ----------- @@ -115,8 +115,7 @@ objects from the source repository into a pack in the cloned repository. --quiet:: -q:: Operate quietly. Progress is not reported to the standard - error stream. This flag is also passed to the `rsync' - command when given. + error stream. --verbose:: -v:: @@ -192,7 +191,8 @@ objects from the source repository into a pack in the cloned repository. Create a 'shallow' clone with a history truncated to the specified number of commits. Implies `--single-branch` unless `--no-single-branch` is given to fetch the histories near the - tips of all branches. + tips of all branches. If you want to clone submodules shallowly, + also pass `--shallow-submodules`. --[no-]single-branch:: Clone only the history leading to the tip of a single branch, @@ -213,6 +213,9 @@ objects from the source repository into a pack in the cloned repository. repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) +--[no-]shallow-submodules:: + All submodules which are cloned will be shallow with a depth of 1. + --separate-git-dir=<git dir>:: Instead of placing the cloned repository where it is supposed to be, place the cloned repository at the specified directory, @@ -220,6 +223,10 @@ objects from the source repository into a pack in the cloned repository. The result is Git repository can be separated from working tree. +-j <n>:: +--jobs <n>:: + The number of submodules fetched at the same time. + Defaults to the `submodule.fetchJobs` option. <repository>:: The (possibly remote) repository to clone from. See the diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 48c33d7ed7..002dae625e 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -44,7 +44,7 @@ OPTIONS An existing tree object -p <parent>:: - Each '-p' indicates the id of a parent commit object. + Each `-p` indicates the id of a parent commit object. -m <message>:: A paragraph in the commit log message. This can be given more than @@ -61,8 +61,8 @@ OPTIONS stuck to the option without a space. --no-gpg-sign:: - Countermand `commit.gpgSign` configuration variable that is - set to force each and every commit to be signed. + Do not GPG-sign commit, to countermand a `--gpg-sign` option + given earlier on the command line. Commit Information diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 9ec6b3cc17..b0a294d3b5 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -75,7 +75,7 @@ OPTIONS -c <commit>:: --reedit-message=<commit>:: - Like '-C', but with '-c' the editor is invoked, so that + Like '-C', but with `-c` the editor is invoked, so that the user can further edit the commit message. --fixup=<commit>:: @@ -201,7 +201,7 @@ default:: Otherwise `whitespace`. -- + -The default can be changed by the 'commit.cleanup' configuration +The default can be changed by the `commit.cleanup` configuration variable (see linkgit:git-config[1]). -e:: @@ -260,7 +260,7 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) staged for other paths. This is the default mode of operation of 'git commit' if any paths are given on the command line, in which case this option can be omitted. - If this option is specified together with '--amend', then + If this option is specified together with `--amend`, then no paths need to be specified, which can be used to amend the last commit without committing changes that have already been staged. @@ -290,7 +290,8 @@ configuration variable documented in linkgit:git-config[1]. what changes the commit has. Note that this diff output doesn't have its lines prefixed with '#'. This diff will not be a part - of the commit message. + of the commit message. See the `commit.verbose` configuration + variable in linkgit:git-config[1]. + If specified twice, show in addition the unified diff between what would be committed and the worktree files, i.e. the unstaged @@ -449,8 +450,8 @@ include::i18n.txt[] ENVIRONMENT AND CONFIGURATION VARIABLES --------------------------------------- The editor used to edit the commit log message will be chosen from the -GIT_EDITOR environment variable, the core.editor configuration variable, the -VISUAL environment variable, or the EDITOR environment variable (in that +`GIT_EDITOR` environment variable, the core.editor configuration variable, the +`VISUAL` environment variable, or the `EDITOR` environment variable (in that order). See linkgit:git-var[1] for details. HOOKS diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 2608ca74ac..83f86b9231 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -9,18 +9,18 @@ git-config - Get and set repository or global options SYNOPSIS -------- [verse] -'git config' [<file-option>] [type] [-z|--null] name [value [value_regex]] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] name [value [value_regex]] 'git config' [<file-option>] [type] --add name value 'git config' [<file-option>] [type] --replace-all name value [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get name [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get-all name [value_regex] -'git config' [<file-option>] [type] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] --get name [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] --get-all name [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get-urlmatch name URL 'git config' [<file-option>] --unset name [value_regex] 'git config' [<file-option>] --unset-all name [value_regex] 'git config' [<file-option>] --rename-section old_name new_name 'git config' [<file-option>] --remove-section name -'git config' [<file-option>] [-z|--null] [--name-only] -l | --list +'git config' [<file-option>] [--show-origin] [-z|--null] [--name-only] -l | --list 'git config' [<file-option>] --get-color name [default] 'git config' [<file-option>] --get-colorbool name [stdout-is-tty] 'git config' [<file-option>] -e | --edit @@ -31,40 +31,40 @@ You can query/set/replace/unset options with this command. The name is actually the section and the key separated by a dot, and the value will be escaped. -Multiple lines can be added to an option by using the '--add' option. +Multiple lines can be added to an option by using the `--add` option. If you want to update or unset an option which can occur on multiple lines, a POSIX regexp `value_regex` needs to be given. Only the existing values that match the regexp are updated or unset. If you want to handle the lines that do *not* match the regex, just prepend a single exclamation mark in front (see also <<EXAMPLES>>). -The type specifier can be either '--int' or '--bool', to make +The type specifier can be either `--int` or `--bool`, to make 'git config' ensure that the variable(s) are of the given type and convert the value to the canonical form (simple decimal number for int, -a "true" or "false" string for bool), or '--path', which does some -path expansion (see '--path' below). If no type specifier is passed, no +a "true" or "false" string for bool), or `--path`, which does some +path expansion (see `--path` below). If no type specifier is passed, no checks or transformations are performed on the value. When reading, the values are read from the system, global and repository local configuration files by default, and options -'--system', '--global', '--local' and '--file <filename>' can be +`--system`, `--global`, `--local` and `--file <filename>` can be used to tell the command to read from only that location (see <<FILES>>). When writing, the new value is written to the repository local -configuration file by default, and options '--system', '--global', -'--file <filename>' can be used to tell the command to write to -that location (you can say '--local' but that is the default). +configuration file by default, and options `--system`, `--global`, +`--file <filename>` can be used to tell the command to write to +that location (you can say `--local` but that is the default). This command will fail with non-zero status upon error. Some exit codes are: -. The config file is invalid (ret=3), -. can not write to the config file (ret=4), -. no section or name was provided (ret=2), -. the section or key is invalid (ret=1), -. you try to unset an option which does not exist (ret=5), -. you try to unset/set an option for which multiple lines match (ret=5), or -. you try to use an invalid regexp (ret=6). +- The section or key is invalid (ret=1), +- no section or name was provided (ret=2), +- the config file is invalid (ret=3), +- the config file cannot be written (ret=4), +- you try to unset an option which does not exist (ret=5), +- you try to unset/set an option for which multiple lines match (ret=5), or +- you try to use an invalid regexp (ret=6). On success, the command returns the exit code 0. @@ -86,8 +86,7 @@ OPTIONS found and the last value if multiple key values were found. --get-all:: - Like get, but does not fail if the number of values for the key - is not exactly one. + Like get, but returns all values for a multi-valued key. --get-regexp:: Like --get-all, but interprets the name as a regular expression and @@ -102,7 +101,7 @@ OPTIONS given URL is returned (if no such key exists, the value for section.key is used as a fallback). When given just the section as name, do so for all the keys in the section and - list them. + list them. Returns error code 1 if no value is found. --global:: For writing options: write to global `~/.gitconfig` file @@ -139,7 +138,7 @@ See also <<FILES>>. Use the given config file instead of the one specified by GIT_CONFIG. --blob blob:: - Similar to '--file' but use the given blob instead of a file. E.g. + Similar to `--file` but use the given blob instead of a file. E.g. you can use 'master:.gitmodules' to read values from the file '.gitmodules' in the master branch. See "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7] for a more complete list of @@ -194,6 +193,12 @@ See also <<FILES>>. Output only the names of config variables for `--list` or `--get-regexp`. +--show-origin:: + Augment the output of all queried config options with the + origin type (file, standard input, blob, command line) and + the actual origin (config file path, ref, or blob id if + applicable). + --get-colorbool name [stdout-is-tty]:: Find the color setting for `name` (e.g. `color.diff`) and output @@ -215,17 +220,19 @@ See also <<FILES>>. -e:: --edit:: Opens an editor to modify the specified config file; either - '--system', '--global', or repository (default). + `--system`, `--global`, or repository (default). --[no-]includes:: Respect `include.*` directives in config files when looking up - values. Defaults to on. + values. Defaults to `off` when a specific file is given (e.g., + using `--file`, `--global`, etc) and `on` when searching all + config files. [[FILES]] FILES ----- -If not set explicitly with '--file', there are four files where +If not set explicitly with `--file`, there are four files where 'git config' will search for configuration options: $(prefix)/etc/gitconfig:: @@ -256,13 +263,16 @@ The files are read in the order given above, with last value found taking precedence over values read earlier. When multiple values are taken then all values of a key from all files will be used. +You may override individual configuration parameters when running any git +command by using the `-c` option. See linkgit:git[1] for details. + All writing options will per default write to the repository specific -configuration file. Note that this also affects options like '--replace-all' -and '--unset'. *'git config' will only ever change one file at a time*. +configuration file. Note that this also affects options like `--replace-all` +and `--unset`. *'git config' will only ever change one file at a time*. You can override these rules either by command-line options or by environment -variables. The '--global' and the '--system' options will limit the file used -to the global or system-wide file respectively. The GIT_CONFIG environment +variables. The `--global` and the `--system` options will limit the file used +to the global or system-wide file respectively. The `GIT_CONFIG` environment variable has a similar effect, but you can specify any filename you want. diff --git a/Documentation/git-credential-cache.txt b/Documentation/git-credential-cache.txt index 89b730632d..96208f822e 100644 --- a/Documentation/git-credential-cache.txt +++ b/Documentation/git-credential-cache.txt @@ -36,7 +36,7 @@ OPTIONS cache daemon if one is not started). Defaults to `~/.git-credential-cache/socket`. If your home directory is on a network-mounted filesystem, you may need to change this to a - local filesystem. + local filesystem. You must specify an absolute path. CONTROLLING THE DAEMON ---------------------- diff --git a/Documentation/git-credential-store.txt b/Documentation/git-credential-store.txt index e3c8f276b1..25fb963f4b 100644 --- a/Documentation/git-credential-store.txt +++ b/Documentation/git-credential-store.txt @@ -44,7 +44,7 @@ OPTIONS FILES ----- -If not set explicitly with '--file', there are two files where +If not set explicitly with `--file`, there are two files where git-credential-store will search for credentials in order of precedence: ~/.git-credentials:: diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 00a0679a28..41207a24b0 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -74,10 +74,10 @@ OPTIONS akin to the way 'git clone' uses 'origin' by default. -o <branch-for-HEAD>:: - When no remote is specified (via -r) the 'HEAD' branch + When no remote is specified (via -r) the `HEAD` branch from CVS is imported to the 'origin' branch within the Git - repository, as 'HEAD' already has a special meaning for Git. - When a remote is specified the 'HEAD' branch is named + repository, as `HEAD` already has a special meaning for Git. + When a remote is specified the `HEAD` branch is named remotes/<remote>/master mirroring 'git clone' behaviour. Use this option if you want to import into a different branch. @@ -103,7 +103,7 @@ the old cvs2git tool. -p <options-for-cvsps>:: Additional options for cvsps. - The options '-u' and '-A' are implicit and should not be used here. + The options `-u` and '-A' are implicit and should not be used here. + If you need to pass multiple options, separate them with a comma. @@ -122,7 +122,7 @@ If you need to pass multiple options, separate them with a comma. -M <regex>:: Attempt to detect merges based on the commit message with a custom - regex. It can be used with '-m' to enable the default regexes + regex. It can be used with `-m` to enable the default regexes as well. You must escape forward slashes. + The regex must capture the source branch name in $1. @@ -186,7 +186,7 @@ messages, bug-tracking systems, email archives, and the like. OUTPUT ------ -If '-v' is specified, the script reports what it is doing. +If `-v` is specified, the script reports what it is doing. Otherwise, success is indicated the Unix way, i.e. by simply exiting with a zero exit status. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index db4d7a917c..a336ae5f6f 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -54,7 +54,7 @@ Print usage information and exit You can specify a list of allowed directories. If no directories are given, all are allowed. This is an additional restriction, gitcvs access still needs to be enabled by the `gitcvs.enabled` config option -unless '--export-all' was given, too. +unless `--export-all` was given, too. DESCRIPTION @@ -332,7 +332,7 @@ To get a checkout with the Eclipse CVS client: 3. Browse the 'modules' available. It will give you a list of the heads in the repository. You will not be able to browse the tree from there. Only the heads. -4. Pick 'HEAD' when it asks what branch/tag to check out. Untick the +4. Pick `HEAD` when it asks what branch/tag to check out. Untick the "launch commit wizard" to avoid committing the .project file. Protocol notes: If you are using anonymous access via pserver, just select that. @@ -402,12 +402,12 @@ Exports and tagging (tags and branches) are not supported at this stage. CRLF Line Ending Conversions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -By default the server leaves the '-k' mode blank for all files, +By default the server leaves the `-k` mode blank for all files, which causes the CVS client to treat them as a text files, subject to end-of-line conversion on some platforms. You can make the server use the end-of-line conversion attributes to -set the '-k' modes for files by setting the `gitcvs.usecrlfattr` +set the `-k` modes for files by setting the `gitcvs.usecrlfattr` config variable. See linkgit:gitattributes[5] for more information about end-of-line conversion. @@ -415,9 +415,9 @@ Alternatively, if `gitcvs.usecrlfattr` config is not enabled or the attributes do not allow automatic detection for a filename, then the server uses the `gitcvs.allBinary` config for the default setting. If `gitcvs.allBinary` is set, then file not otherwise -specified will default to '-kb' mode. Otherwise the '-k' mode +specified will default to '-kb' mode. Otherwise the `-k` mode is left blank. But if `gitcvs.allBinary` is set to "guess", then -the correct '-k' mode will be guessed based on the contents of +the correct `-k` mode will be guessed based on the contents of the file. For best consistency with 'cvs', it is probably best to override the diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index a69b3616ec..3c91db7bed 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -30,7 +30,7 @@ that service if it is enabled. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any Git directory that hasn't explicitly been marked -for export this way (unless the '--export-all' parameter is specified). If you +for export this way (unless the `--export-all` parameter is specified). If you pass some directory paths as 'git daemon' arguments, you can further restrict the offers to a whitelist comprising of those. @@ -90,10 +90,10 @@ OPTIONS is not supported, then --listen=hostname is also not supported and --listen must be given an IPv4 address. Can be given more than once. - Incompatible with '--inetd' option. + Incompatible with `--inetd` option. --port=<n>:: - Listen on an alternative port. Incompatible with '--inetd' option. + Listen on an alternative port. Incompatible with `--inetd` option. --init-timeout=<n>:: Timeout (in seconds) between the moment the connection is established @@ -188,7 +188,7 @@ Git configuration files in that directory are readable by `<user>`. arguments. The external command can decide to decline the service by exiting with a non-zero status (or to allow it by exiting with a zero status). It can also look at the $REMOTE_ADDR - and $REMOTE_PORT environment variables to learn about the + and `$REMOTE_PORT` environment variables to learn about the requestor when making this decision. + The external command can optionally write a single line to its @@ -296,7 +296,7 @@ they correspond to these IP addresses. selectively enable/disable services per repository:: To enable 'git archive --remote' and disable 'git fetch' against a repository, have the following in the configuration file in the - repository (that is the file 'config' next to 'HEAD', 'refs' and + repository (that is the file 'config' next to `HEAD`, 'refs' and 'objects'). + ---------------------------------------------------------------- diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index c8f28c8c86..e4ac448ff5 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -154,7 +154,7 @@ is found, its name will be output and searching will stop. If an exact match was not found, 'git describe' will walk back through the commit history to locate an ancestor commit which has been tagged. The ancestor's tag will be output along with an -abbreviation of the input commit-ish's SHA-1. If '--first-parent' was +abbreviation of the input commit-ish's SHA-1. If `--first-parent` was specified then the walk will only consider the first parent of each commit. diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index a86cf62e68..a171506952 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -40,13 +40,13 @@ include::diff-format.txt[] Operating Modes --------------- You can choose whether you want to trust the index file entirely -(using the '--cached' flag) or ask the diff logic to show any files +(using the `--cached` flag) or ask the diff logic to show any files that don't match the stat state as being "tentatively changed". Both of these operations are very useful indeed. Cached Mode ----------- -If '--cached' is specified, it allows you to ask: +If `--cached` is specified, it allows you to ask: show me the differences between HEAD and the current index contents (the ones I'd write using 'git write-tree') diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index 1439486e40..7870e175b7 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -43,11 +43,11 @@ include::diff-options.txt[] show tree entry itself as well as subtrees. Implies -r. --root:: - When '--root' is specified the initial commit will be shown as a big + When `--root` is specified the initial commit will be shown as a big creation event. This is equivalent to a diff against the NULL tree. --stdin:: - When '--stdin' is specified, the command does not take + When `--stdin` is specified, the command does not take <tree-ish> arguments from the command line. Instead, it reads lines containing either two <tree>, one <commit>, or a list of <commit> from its standard input. (Use a single space @@ -70,13 +70,13 @@ commits (but not trees). By default, 'git diff-tree --stdin' does not show differences for merge commits. With this flag, it shows differences to that commit from all of its parents. See - also '-c'. + also `-c`. -s:: By default, 'git diff-tree --stdin' shows differences, - either in machine-readable form (without '-p') or in patch - form (with '-p'). This output can be suppressed. It is - only useful with '-v' flag. + either in machine-readable form (without `-p`) or in patch + form (with `-p`). This output can be suppressed. It is + only useful with `-v` flag. -v:: This flag causes 'git diff-tree --stdin' to also show @@ -91,17 +91,17 @@ include::pretty-options.txt[] -c:: This flag changes the way a merge commit is displayed (which means it is useful only when the command is given - one <tree-ish>, or '--stdin'). It shows the differences + one <tree-ish>, or `--stdin`). It shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the - result one at a time (which is what the '-m' option does). + result one at a time (which is what the `-m` option does). Furthermore, it lists only files which were modified from all parents. --cc:: This flag changes the way a merge commit patch is displayed, - in a similar way to the '-c' option. It implies the '-c' - and '-p' options and further compresses the patch output + in a similar way to the `-c` option. It implies the `-c` + and `-p` options and further compresses the patch output by omitting uninteresting hunks whose the contents in the parents have only two variants and the merge result picks one of them without modification. When all hunks are uninteresting, the commit diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 333cf6ff91..224fb3090b 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -98,7 +98,7 @@ instead. `--no-symlinks` is the default on Windows. invoked diff tool returns a non-zero exit code. + 'git-difftool' will forward the exit code of the invoked tool when -'--trust-exit-code' is used. +`--trust-exit-code` is used. See linkgit:git-diff[1] for the full list of supported options. diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 66910aa2fa..c105f2121e 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -1054,7 +1054,7 @@ relative-marks:: no-relative-marks:: force:: Act as though the corresponding command-line option with - a leading '--' was passed on the command line + a leading `--` was passed on the command line (see OPTIONS, above). import-marks:: @@ -1105,7 +1105,7 @@ options the user may specify to git fast-import itself. The `<option>` part of the command may contain any of the options listed in the OPTIONS section that do not change import semantics, -without the leading '--' and is treated in the same way. +without the leading `--` and is treated in the same way. Option commands must be the first commands on the input (not counting feature commands), to give an option command after any non-option diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 8680f45f8d..24417ee3a6 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -41,13 +41,13 @@ OPTIONS option, then the refs from stdin are processed after those on the command line. + -If '--stateless-rpc' is specified together with this option then +If `--stateless-rpc` is specified together with this option then the list of refs must be in packet format (pkt-line). Each ref must be in a separate packet, and the list must end with a flush packet. -q:: --quiet:: - Pass '-q' flag to 'git unpack-objects'; this makes the + Pass `-q` flag to 'git unpack-objects'; this makes the cloning process less verbose. -k:: @@ -104,6 +104,10 @@ be in a separate packet, and the list must end with a flush packet. The remote heads to update from. This is relative to $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. ++ +If the remote has enabled the options `uploadpack.allowTipSHA1InWant` or +`uploadpack.allowReachableSHA1InWant`, they may alternatively be 40-hex +sha1s present on the remote. SEE ALSO -------- diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 73fd9e8230..0a09698c03 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -52,7 +52,7 @@ if different from the rewritten ones, will be stored in the namespace Note that since this operation is very I/O expensive, it might be a good idea to redirect the temporary directory off-disk with the -'-d' option, e.g. on tmpfs. Reportedly the speedup is very noticeable. +`-d` option, e.g. on tmpfs. Reportedly the speedup is very noticeable. Filters @@ -61,7 +61,7 @@ Filters The filters are applied in the order as listed below. The <command> argument is always evaluated in the shell context using the 'eval' command (with the notable exception of the commit filter, for technical reasons). -Prior to that, the $GIT_COMMIT environment variable will be set to contain +Prior to that, the `$GIT_COMMIT` environment variable will be set to contain the id of the commit being rewritten. Also, GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME, GIT_COMMITTER_EMAIL, and GIT_COMMITTER_DATE are taken from the current commit and exported to @@ -171,7 +171,7 @@ to other tags will be rewritten to point to the underlying commit. untouched. This switch allow git-filter-branch to ignore such commits. Though, this switch only applies for commits that have one and only one parent, it will hence keep merges points. Also, this - option is not compatible with the use of '--commit-filter'. Though you + option is not compatible with the use of `--commit-filter`. Though you just need to use the function 'git_commit_non_empty_tree "$@"' instead of the `git commit-tree "$@"` idiom in your commit filter to make that happen. @@ -197,7 +197,7 @@ to other tags will be rewritten to point to the underlying commit. <rev-list options>...:: Arguments for 'git rev-list'. All positive refs included by these options are rewritten. You may also specify options - such as '--all', but you must use '--' to separate them from + such as `--all`, but you must use `--` to separate them from the 'git filter-branch' options. Implies <<Remap_to_ancestor>>. @@ -205,7 +205,7 @@ to other tags will be rewritten to point to the underlying commit. Remap to ancestor ~~~~~~~~~~~~~~~~~ -By using linkgit:rev-list[1] arguments, e.g., path limiters, you can limit the +By using linkgit:git-rev-list[1] arguments, e.g., path limiters, you can limit the set of revisions which get rewritten. However, positive refs on the command line are distinguished: we don't let them be excluded by such limiters. For this purpose, they are instead rewritten to point at the nearest ancestor that diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 2e3e96f663..f57e69bc83 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -76,7 +76,7 @@ OPTIONS specified commit (HEAD if not specified). --contains [<object>]:: - Only list tags which contain the specified commit (HEAD if not + Only list refs which contain the specified commit (HEAD if not specified). FIELD NAMES @@ -133,14 +133,18 @@ color:: align:: Left-, middle-, or right-align the content between - %(align:...) and %(end). The "align:" is followed by `<width>` - and `<position>` in any order separated by a comma, where the - `<position>` is either left, right or middle, default being - left and `<width>` is the total length of the content with - alignment. If the contents length is more than the width then - no alignment is performed. If used with '--quote' everything - in between %(align:...) and %(end) is quoted, but if nested - then only the topmost level performs quoting. + %(align:...) and %(end). The "align:" is followed by + `width=<width>` and `position=<position>` in any order + separated by a comma, where the `<position>` is either left, + right or middle, default being left and `<width>` is the total + length of the content with alignment. For brevity, the + "width=" and/or "position=" prefixes may be omitted, and bare + <width> and <position> used instead. For instance, + `%(align:<width>,<position>)`. If the contents length is more + than the width then no alignment is performed. If used with + `--quote` everything in between %(align:...) and %(end) is + quoted, but if nested then only the topmost level performs + quoting. In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can @@ -175,7 +179,7 @@ returns an empty string instead. As a special case for the date-type fields, you may specify a format for the date by adding `:` followed by date format name (see the -values the `--date` option to linkgit::git-rev-list[1] takes). +values the `--date` option to linkgit:git-rev-list[1] takes). EXAMPLES diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index b149e09065..9624c84a65 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -57,7 +57,11 @@ The names of the output files are printed to standard output, unless the `--stdout` option is specified. If `-o` is specified, output files are created in <dir>. Otherwise -they are created in the current working directory. +they are created in the current working directory. The default path +can be set with the `format.outputDirectory` configuration option. +The `-o` option takes precedence over `format.outputDirectory`. +To store patches in the current working directory even when +`format.outputDirectory` points elsewhere, use `-o .`. By default, the subject of a single patch is "[PATCH] " followed by the concatenation of lines from the commit message up to the first blank @@ -142,9 +146,9 @@ series, where the head is chosen from the cover letter, the `--in-reply-to`, and the first patch mail, in this order. 'deep' threading makes every mail a reply to the previous one. + -The default is `--no-thread`, unless the 'format.thread' configuration +The default is `--no-thread`, unless the `format.thread` configuration is set. If `--thread` is specified without a style, it defaults to the -style specified by 'format.thread' if any, or else `shallow`. +style specified by `format.thread` if any, or else `shallow`. + Beware that the default for 'git send-email' is to thread emails itself. If you want `git format-patch` to take care of threading, you @@ -261,6 +265,11 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. Output an all-zero hash in each patch's From header instead of the hash of the commit. +--base=<commit>:: + Record the base tree information to identify the state the + patch series applies to. See the BASE TREE INFORMATION section + below for details. + --root:: Treat the revision argument as a <revision range>, even if it is just a single commit (that would normally be treated as a @@ -516,6 +525,61 @@ This should help you to submit patches inline using KMail. 5. Back in the compose window: add whatever other text you wish to the message, complete the addressing and subject fields, and press send. +BASE TREE INFORMATION +--------------------- + +The base tree information block is used for maintainers or third party +testers to know the exact state the patch series applies to. It consists +of the 'base commit', which is a well-known commit that is part of the +stable part of the project history everybody else works off of, and zero +or more 'prerequisite patches', which are well-known patches in flight +that is not yet part of the 'base commit' that need to be applied on top +of 'base commit' in topological order before the patches can be applied. + +The 'base commit' is shown as "base-commit: " followed by the 40-hex of +the commit object name. A 'prerequisite patch' is shown as +"prerequisite-patch-id: " followed by the 40-hex 'patch id', which can +be obtained by passing the patch through the `git patch-id --stable` +command. + +Imagine that on top of the public commit P, you applied well-known +patches X, Y and Z from somebody else, and then built your three-patch +series A, B, C, the history would be like: + +................................................ +---P---X---Y---Z---A---B---C +................................................ + +With `git format-patch --base=P -3 C` (or variants thereof, e.g. with +`--cover-letter` of using `Z..C` instead of `-3 C` to specify the +range), the base tree information block is shown at the end of the +first message the command outputs (either the first patch, or the +cover letter), like this: + +------------ +base-commit: P +prerequisite-patch-id: X +prerequisite-patch-id: Y +prerequisite-patch-id: Z +------------ + +For non-linear topology, such as + +................................................ +---P---X---A---M---C + \ / + Y---Z---B +................................................ + +You can also use `git format-patch --base=P -3 C` to generate patches +for A, B and C, and the identifiers for P, X, Y, Z are appended at the +end of the first message. + +If set `--base=auto` in cmdline, it will track base commit automatically, +the base commit will be the merge base of tip commit of the remote-tracking +branch and revision-range specified in cmdline. +For a local branch, you need to track a remote branch by `git branch +--set-upstream-to` before using this option. EXAMPLES -------- diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 84ee92e158..7fc68eb319 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -95,7 +95,7 @@ DISCUSSION git-fsck tests SHA-1 and general object sanity, and it does full tracking of the resulting reachability and everything else. It prints out any corruption it finds (missing or bad objects), and if you use the -'--unreachable' flag it will also print out objects that exist but that +`--unreachable` flag it will also print out objects that exist but that aren't reachable from any of the specified head nodes (or the default set, as mentioned above). diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index fa1510480a..bed60f471c 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -82,13 +82,13 @@ automatic consolidation of packs. Configuration ------------- -The optional configuration variable 'gc.reflogExpire' can be +The optional configuration variable `gc.reflogExpire` can be set to indicate how long historical entries within each branch's reflog should remain available in this repository. The setting is expressed as a length of time, for example '90 days' or '3 months'. It defaults to '90 days'. -The optional configuration variable 'gc.reflogExpireUnreachable' +The optional configuration variable `gc.reflogExpireUnreachable` can be set to indicate how long historical reflog entries which are not part of the current branch should remain available in this repository. These types of entries are generally created as @@ -107,30 +107,30 @@ branches: reflogExpireUnreachable = 3 days ------------ -The optional configuration variable 'gc.rerereResolved' indicates +The optional configuration variable `gc.rerereResolved` indicates how long records of conflicted merge you resolved earlier are kept. This defaults to 60 days. -The optional configuration variable 'gc.rerereUnresolved' indicates +The optional configuration variable `gc.rerereUnresolved` indicates how long records of conflicted merge you have not resolved are kept. This defaults to 15 days. -The optional configuration variable 'gc.packRefs' determines if +The optional configuration variable `gc.packRefs` determines if 'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable it within all non-bare repos or it can be set to a boolean value. This defaults to true. -The optional configuration variable 'gc.aggressiveWindow' controls how +The optional configuration variable `gc.aggressiveWindow` controls how much time is spent optimizing the delta compression of the objects in the repository when the --aggressive option is specified. The larger the value, the more time is spent optimizing the delta compression. See the documentation for the --window' option in linkgit:git-repack[1] for more details. This defaults to 250. -Similarly, the optional configuration variable 'gc.aggressiveDepth' +Similarly, the optional configuration variable `gc.aggressiveDepth` controls --depth option in linkgit:git-repack[1]. This defaults to 250. -The optional configuration variable 'gc.pruneExpire' controls how old +The optional configuration variable `gc.pruneExpire` controls how old the unreferenced loose objects have to be before they are pruned. The default is "2 weeks ago". diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 4a44d6da13..0ecea6e491 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -23,6 +23,7 @@ SYNOPSIS [--break] [--heading] [-p | --show-function] [-A <post-context>] [-B <pre-context>] [-C <context>] [-W | --function-context] + [--threads <num>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] [ [--[no-]exclude-standard] [--cached | --no-index | --untracked] | <tree>...] @@ -40,21 +41,29 @@ CONFIGURATION ------------- grep.lineNumber:: - If set to true, enable '-n' option by default. + If set to true, enable `-n` option by default. grep.patternType:: Set the default matching behavior. Using a value of 'basic', 'extended', - 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', - '--fixed-strings', or '--perl-regexp' option accordingly, while the + 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, + `--fixed-strings`, or `--perl-regexp` option accordingly, while the value 'default' will return to the default matching behavior. grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. This - option is ignored when the 'grep.patternType' option is set to a value + If set to true, enable `--extended-regexp` option by default. This + option is ignored when the `grep.patternType` option is set to a value other than 'default'. +grep.threads:: + Number of grep worker threads to use. If unset (or set to 0), + 8 threads are used by default (for now). + grep.fullName:: - If set to true, enable '--full-name' option by default. + If set to true, enable `--full-name` option by default. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. OPTIONS @@ -227,6 +236,10 @@ OPTIONS effectively showing the whole function in which the match was found. +--threads <num>:: + Number of grep worker threads to use. + See `grep.threads` in 'CONFIGURATION' for more information. + -f <file>:: Read patterns from <file>, one per line. diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index 8144527ae0..c1a3e8bf07 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -35,7 +35,7 @@ blame:: browser:: Start a tree browser showing all files in the specified - commit (or 'HEAD' by default). Files selected through the + commit (or `HEAD` by default). Files selected through the browser are opened in the blame viewer. citool:: diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index 3956525218..40d328a4b3 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -18,10 +18,10 @@ With no options and no COMMAND or GUIDE given, the synopsis of the 'git' command and a list of the most commonly used Git commands are printed on the standard output. -If the option '--all' or '-a' is given, all available commands are +If the option `--all` or `-a` is given, all available commands are printed on the standard output. -If the option '--guide' or '-g' is given, a list of the useful +If the option `--guide` or `-g` is given, a list of the useful Git guides is also printed on the standard output. If a command, or a guide, is given, a manual page for that command or @@ -57,10 +57,10 @@ OPTIONS --man:: Display manual page for the command in the 'man' format. This option may be used to override a value set in the - 'help.format' configuration variable. + `help.format` configuration variable. + By default the 'man' program will be used to display the manual page, -but the 'man.viewer' configuration variable may be used to choose +but the `man.viewer` configuration variable may be used to choose other display programs (see below). -w:: @@ -69,7 +69,7 @@ other display programs (see below). format. A web browser will be used for that purpose. + The web browser can be specified using the configuration variable -'help.browser', or 'web.browser' if the former is not set. If none of +`help.browser`, or `web.browser` if the former is not set. If none of these config variables is set, the 'git web{litdd}browse' helper script (called by 'git help') will pick a suitable default. See linkgit:git-web{litdd}browse[1] for more information about this. @@ -80,7 +80,7 @@ CONFIGURATION VARIABLES help.format ~~~~~~~~~~~ -If no command-line option is passed, the 'help.format' configuration +If no command-line option is passed, the `help.format` configuration variable will be checked. The following values are supported for this variable; they make 'git help' behave as their corresponding command- line option: @@ -92,7 +92,7 @@ line option: help.browser, web.browser and browser.<tool>.path ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The 'help.browser', 'web.browser' and 'browser.<tool>.path' will also +The `help.browser`, `web.browser` and `browser.<tool>.path` will also be checked if the 'web' format is chosen (either by command-line option or configuration variable). See '-w|--web' in the OPTIONS section above and linkgit:git-web{litdd}browse[1]. @@ -100,7 +100,7 @@ section above and linkgit:git-web{litdd}browse[1]. man.viewer ~~~~~~~~~~ -The 'man.viewer' configuration variable will be checked if the 'man' +The `man.viewer` configuration variable will be checked if the 'man' format is chosen. The following values are currently supported: * "man": use the 'man' program as usual, @@ -110,9 +110,9 @@ format is chosen. The following values are currently supported: tab (see 'Note about konqueror' below). Values for other tools can be used if there is a corresponding -'man.<tool>.cmd' configuration entry (see below). +`man.<tool>.cmd` configuration entry (see below). -Multiple values may be given to the 'man.viewer' configuration +Multiple values may be given to the `man.viewer` configuration variable. Their corresponding programs will be tried in the order listed in the configuration file. @@ -128,14 +128,14 @@ will try to use konqueror first. But this may fail (for example, if DISPLAY is not set) and in that case emacs' woman mode will be tried. If everything fails, or if no viewer is configured, the viewer specified -in the GIT_MAN_VIEWER environment variable will be tried. If that +in the `GIT_MAN_VIEWER` environment variable will be tried. If that fails too, the 'man' program will be tried anyway. man.<tool>.path ~~~~~~~~~~~~~~~ You can explicitly provide a full path to your preferred man viewer by -setting the configuration variable 'man.<tool>.path'. For example, you +setting the configuration variable `man.<tool>.path`. For example, you can configure the absolute path to konqueror by setting 'man.konqueror.path'. Otherwise, 'git help' assumes the tool is available in PATH. @@ -143,9 +143,9 @@ available in PATH. man.<tool>.cmd ~~~~~~~~~~~~~~ -When the man viewer, specified by the 'man.viewer' configuration +When the man viewer, specified by the `man.viewer` configuration variables, is not among the supported ones, then the corresponding -'man.<tool>.cmd' configuration variable will be looked up. If this +`man.<tool>.cmd` configuration variable will be looked up. If this variable exists then the specified tool will be treated as a custom command and a shell eval will be used to run the command with the man page passed as arguments. @@ -153,7 +153,7 @@ page passed as arguments. Note about konqueror ~~~~~~~~~~~~~~~~~~~~ -When 'konqueror' is specified in the 'man.viewer' configuration +When 'konqueror' is specified in the `man.viewer` configuration variable, we launch 'kfmclient' to try to open the man page on an already opened konqueror in a new tab if possible. @@ -176,7 +176,7 @@ Note about git config --global ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Note that all these configuration variables should probably be set -using the '--global' flag, for example like this: +using the `--global` flag, for example like this: ------------------------------------------------ $ git config --global help.format web diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 9268fb6b1e..bb0db195ce 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -21,7 +21,7 @@ pushing using the smart HTTP protocol. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any Git directory that hasn't explicitly been marked for export this way (unless the -GIT_HTTP_EXPORT_ALL environmental variable is set). +`GIT_HTTP_EXPORT_ALL` environmental variable is set). By default, only the `upload-pack` service is enabled, which serves 'git fetch-pack' and 'git ls-remote' clients, which are invoked from @@ -241,7 +241,7 @@ $HTTP["url"] =~ "^/git/private" { ENVIRONMENT ----------- -'git http-backend' relies upon the CGI environment variables set +'git http-backend' relies upon the `CGI` environment variables set by the invoking web server, including: * PATH_INFO (if GIT_PROJECT_ROOT is set, otherwise PATH_TRANSLATED) @@ -251,7 +251,7 @@ by the invoking web server, including: * QUERY_STRING * REQUEST_METHOD -The GIT_HTTP_EXPORT_ALL environmental variable may be passed to +The `GIT_HTTP_EXPORT_ALL` environmental variable may be passed to 'git-http-backend' to bypass the check for the "git-daemon-export-ok" file in each repository before allowing export of that repository. @@ -269,7 +269,7 @@ GIT_COMMITTER_EMAIL to '$\{REMOTE_USER}@http.$\{REMOTE_ADDR\}', ensuring that any reflogs created by 'git-receive-pack' contain some identifying information of the remote user who performed the push. -All CGI environment variables are available to each of the hooks +All `CGI` environment variables are available to each of the hooks invoked by the 'git-receive-pack'. GIT diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index 2e67362bd4..2aceb6f26d 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -81,13 +81,13 @@ destination side. exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. -Without '--force', the <src> ref is stored at the remote only if +Without `--force`, the <src> ref is stored at the remote only if <dst> does not exist, or <dst> is a proper subset (i.e. an ancestor) of <src>. This check, known as "fast-forward check", is performed in order to avoid accidentally overwriting the remote ref and lose other peoples' commits from there. -With '--force', the fast-forward check is disabled for all refs. +With `--force`, the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 8174d27efd..9d27197de8 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -47,7 +47,7 @@ Only print error and warning messages; all other output will be suppressed. --bare:: -Create a bare repository. If GIT_DIR environment is not set, it is set to the +Create a bare repository. If `GIT_DIR` environment is not set, it is set to the current working directory. --template=<template_directory>:: @@ -130,7 +130,12 @@ The template directory will be one of the following (in order): - the default template directory: `/usr/share/git-core/templates`. The default template directory includes some directory structure, suggested -"exclude patterns" (see linkgit:gitignore[5]), and sample hook files (see linkgit:githooks[5]). +"exclude patterns" (see linkgit:gitignore[5]), and sample hook files. + +The sample hooks are all disabled by default, To enable one of the +sample hooks rename it by removing its `.sample` suffix. + +See linkgit:githooks[5] for more general info on hook execution. EXAMPLES -------- diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index cc75b25022..e8ecdbf927 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -80,8 +80,8 @@ You may specify configuration in your .git/config ----------------------------------------------------------------------- -If the configuration variable 'instaweb.browser' is not set, -'web.browser' will be used instead if it is defined. See +If the configuration variable `instaweb.browser` is not set, +`web.browser` will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. SEE ALSO diff --git a/Documentation/git-interpret-trailers.txt b/Documentation/git-interpret-trailers.txt index 0ecd497c4d..93d1db6528 100644 --- a/Documentation/git-interpret-trailers.txt +++ b/Documentation/git-interpret-trailers.txt @@ -8,7 +8,7 @@ git-interpret-trailers - help add structured information into commit messages SYNOPSIS -------- [verse] -'git interpret-trailers' [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] +'git interpret-trailers' [--in-place] [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] DESCRIPTION ----------- @@ -64,6 +64,9 @@ folding rules, the encoding rules and probably many other rules. OPTIONS ------- +--in-place:: + Edit the files in place. + --trim-empty:: If the <value> part of any trailer contains only whitespace, the whole trailer will be removed from the resulting message. @@ -216,6 +219,25 @@ Signed-off-by: Alice <alice@example.com> Signed-off-by: Bob <bob@example.com> ------------ +* Use the `--in-place` option to edit a message file in place: ++ +------------ +$ cat msg.txt +subject + +message + +Signed-off-by: Bob <bob@example.com> +$ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt +$ cat msg.txt +subject + +message + +Signed-off-by: Bob <bob@example.com> +Acked-by: Alice <alice@example.com> +------------ + * Extract the last commit as a patch, and add a 'Cc' and a 'Reviewed-by' trailer to it: + diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 03f958029a..4a6c47f843 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -29,12 +29,14 @@ OPTIONS (works only for a single file). --no-decorate:: ---decorate[=short|full|no]:: +--decorate[=short|full|auto|no]:: Print out the ref names of any commits that are shown. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the - full ref name (including prefix) will be printed. The default option - is 'short'. + full ref name (including prefix) will be printed. If 'auto' is + specified, then if the output is going to a terminal, the ref names + are shown as if 'short' were given, otherwise no ref names are + shown. The default option is 'short'. --source:: Print out the ref name given on the command line by which each @@ -201,7 +203,7 @@ mailmap.*:: notes.displayRef:: Which refs, in addition to the default set by `core.notesRef` - or 'GIT_NOTES_REF', to read notes from when showing commit + or `GIT_NOTES_REF`, to read notes from when showing commit messages with the `log` family of commands. See linkgit:git-notes[1]. + @@ -210,7 +212,7 @@ multiple times. A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. + This setting can be disabled by the `--no-notes` option, -overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +overridden by the `GIT_NOTES_DISPLAY_REF` environment variable, and overridden by the `--notes=<ref>` option. GIT diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index e26f01fb1d..078b556665 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -12,6 +12,7 @@ SYNOPSIS 'git ls-files' [-z] [-t] [-v] (--[cached|deleted|others|ignored|stage|unmerged|killed|modified])* (-[c|d|o|i|s|u|k|m])* + [--eol] [-x <pattern>|--exclude=<pattern>] [-X <file>|--exclude-from=<file>] [--exclude-per-directory=<file>] @@ -147,6 +148,24 @@ a space) at the start of each line: possible for manual inspection; the exact format may change at any time. +--eol:: + Show <eolinfo> and <eolattr> of files. + <eolinfo> is the file content identification used by Git when + the "text" attribute is "auto" (or not set and core.autocrlf is not false). + <eolinfo> is either "-text", "none", "lf", "crlf", "mixed" or "". ++ +"" means the file is not a regular file, it is not in the index or +not accessible in the working tree. ++ +<eolattr> is the attribute that is used when checking out or committing, +it is either "", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf". +Note: Currently Git does not support "text=auto eol=lf" or "text=auto eol=crlf", +that may change in the future. ++ +Both the <eolinfo> in the index ("i/<eolinfo>") +and in the working tree ("w/<eolinfo>") are shown for regular files, +followed by the ("attr/<eolattr>"). + \--:: Do not interpret any more arguments as options. @@ -156,11 +175,14 @@ a space) at the start of each line: Output ------ -'git ls-files' just outputs the filenames unless '--stage' is specified in +'git ls-files' just outputs the filenames unless `--stage` is specified in which case it outputs: [<tag> ]<mode> <object> <stage> <file> +'git ls-files --eol' will show + i/<eolinfo><SPACES>w/<eolinfo><SPACES>attr/<eolattr><SPACE*><TAB><file> + 'git ls-files --unmerged' and 'git ls-files --stage' can be used to examine detailed information on unmerged paths. diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index d510c05e11..5f2628c8f8 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -9,8 +9,9 @@ git-ls-remote - List references in a remote repository SYNOPSIS -------- [verse] -'git ls-remote' [--heads] [--tags] [--upload-pack=<exec>] - [--exit-code] <repository> [<refs>...] +'git ls-remote' [--heads] [--tags] [--refs] [--upload-pack=<exec>] + [-q | --quiet] [--exit-code] [--get-url] + [--symref] [<repository> [<refs>...]] DESCRIPTION ----------- @@ -29,6 +30,13 @@ OPTIONS both, references stored in refs/heads and refs/tags are displayed. +--refs:: + Do not show peeled tags or pseudorefs like HEAD in the output. + +-q:: +--quiet:: + Do not print remote URL to stderr. + --upload-pack=<exec>:: Specify the full path of 'git-upload-pack' on the remote host. This allows listing references from repositories accessed via @@ -46,6 +54,12 @@ OPTIONS "url.<base>.insteadOf" config setting (See linkgit:git-config[1]) and exit without talking to the remote. +--symref:: + In addition to the object pointed by it, show the underlying + ref pointed by it when showing a symbolic ref. Currently, + upload-pack only shows the symref HEAD, so it will be the only + one shown by ls-remote. + <repository>:: The "remote" repository to query. This parameter can be either a URL or the name of a remote (see the GIT URLS and diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 16e87fd6dd..dbc91f98ff 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -20,16 +20,16 @@ in the current working directory. Note that: - the behaviour is slightly different from that of "/bin/ls" in that the '<path>' denotes just a list of patterns to match, e.g. so specifying - directory name (without '-r') will behave differently, and order of the + directory name (without `-r`) will behave differently, and order of the arguments does not matter. - the behaviour is similar to that of "/bin/ls" in that the '<path>' is taken as relative to the current working directory. E.g. when you are in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is - 'sub/dir' in 'HEAD'). You don't want to give a tree that is not at the + 'sub/dir' in `HEAD`). You don't want to give a tree that is not at the root level (e.g. `git ls-tree -r HEAD:sub dir`) in this case, as that - would result in asking for 'sub/sub/dir' in the 'HEAD' commit. + would result in asking for 'sub/sub/dir' in the `HEAD` commit. However, the current working directory can be ignored by passing --full-tree option. @@ -46,7 +46,7 @@ OPTIONS -t:: Show tree entries even when going to recurse them. Has no effect - if '-r' was not passed. '-d' implies '-t'. + if `-r` was not passed. `-d` implies `-t`. -l:: --long:: diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 0947084140..3bbc731f67 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -85,7 +85,7 @@ with comments and suggestions on the message you are responding to, and to conclude it with a patch submission, separating the discussion and the beginning of the proposed commit log message with a scissors line. + -This can enabled by default with the configuration option mailinfo.scissors. +This can be enabled by default with the configuration option mailinfo.scissors. --no-scissors:: Ignore scissors lines. Useful for overriding mailinfo.scissors settings. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 07f7295ec8..b758d5556c 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -11,6 +11,7 @@ SYNOPSIS [verse] 'git merge' [-n] [--stat] [--no-commit] [--squash] [--[no-]edit] [-s <strategy>] [-X <strategy-option>] [-S[<keyid>]] + [--[no-]allow-unrelated-histories] [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...] 'git merge' <msg> HEAD <commit>... 'git merge' --abort diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt index 5c6ebdfad9..c3616e7711 100644 --- a/Documentation/git-mktree.txt +++ b/Documentation/git-mktree.txt @@ -32,7 +32,7 @@ OPTIONS --batch:: Allow building of more than one tree object before exiting. Each tree is separated by as single blank line. The final new-line is - optional. Note - if the '-z' option is used, lines are terminated + optional. Note - if the `-z` option is used, lines are terminated with NUL. GIT diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index e4531325cd..79449bf98f 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -32,10 +32,10 @@ OPTIONS --force:: Force renaming or moving of a file even if the target exists -k:: - Skip move or rename actions which would lead to an error + Skip move or rename actions which would lead to an error condition. An error happens when a source is neither existing nor controlled by Git, or when it would overwrite an existing - file unless '-f' is given. + file unless `-f` is given. -n:: --dry-run:: Do nothing; only show what would happen diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 8de349968a..be7db3048d 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -152,7 +152,7 @@ OPTIONS -c <object>:: --reedit-message=<object>:: - Like '-C', but with '-c' the editor is invoked, so that + Like '-C', but with `-c` the editor is invoked, so that the user can further edit the note message. --allow-empty:: @@ -161,7 +161,7 @@ OPTIONS --ref <ref>:: Manipulate the notes tree in <ref>. This overrides - 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref + `GIT_NOTES_REF` and the "core.notesRef" configuration. The ref specifies the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. @@ -333,10 +333,10 @@ notes.<name>.mergeStrategy:: notes.displayRef:: Which ref (or refs, if a glob or specified more than once), in addition to the default set by `core.notesRef` or - 'GIT_NOTES_REF', to read notes from when showing commit + `GIT_NOTES_REF`, to read notes from when showing commit messages with the 'git log' family of commands. This setting can be overridden on the command line or by the - 'GIT_NOTES_DISPLAY_REF' environment variable. + `GIT_NOTES_DISPLAY_REF` environment variable. See linkgit:git-log[1]. notes.rewrite.<command>:: @@ -345,7 +345,7 @@ notes.rewrite.<command>:: notes from the original to the rewritten commit. Defaults to `true`. See also "`notes.rewriteRef`" below. + -This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +This setting can be overridden by the `GIT_NOTES_REWRITE_REF` environment variable. notes.rewriteMode:: @@ -366,33 +366,33 @@ notes.rewriteRef:: Does not have a default value; you must configure this variable to enable note rewriting. + -Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. +Can be overridden with the `GIT_NOTES_REWRITE_REF` environment variable. ENVIRONMENT ----------- -'GIT_NOTES_REF':: +`GIT_NOTES_REF`:: Which ref to manipulate notes from, instead of `refs/notes/commits`. This overrides the `core.notesRef` setting. -'GIT_NOTES_DISPLAY_REF':: +`GIT_NOTES_DISPLAY_REF`:: Colon-delimited list of refs or globs indicating which refs, in addition to the default from `core.notesRef` or - 'GIT_NOTES_REF', to read notes from when showing commit + `GIT_NOTES_REF`, to read notes from when showing commit messages. This overrides the `notes.displayRef` setting. + A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. -'GIT_NOTES_REWRITE_MODE':: +`GIT_NOTES_REWRITE_MODE`:: When copying notes during a rewrite, what to do if the target commit already has a note. Must be one of `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`. This overrides the `core.rewriteMode` setting. -'GIT_NOTES_REWRITE_REF':: +`GIT_NOTES_REWRITE_REF`:: When rewriting commits, which notes to copy from the original to the rewritten commit. Must be a colon-delimited list of refs or globs. @@ -402,4 +402,4 @@ on the `notes.rewrite.<command>` and `notes.rewriteRef` settings. GIT --- -Part of the linkgit:git[7] suite +Part of the linkgit:git[1] suite diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index 738cfde10c..c83aaf39c3 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -104,7 +104,7 @@ $ git p4 sync //path/in/your/perforce/depot ------------ This imports the specified depot into 'refs/remotes/p4/master' in an existing Git repository. The -'--branch' option can be used to specify a different branch to +`--branch` option can be used to specify a different branch to be used for the p4 content. If a Git repository includes branches 'refs/remotes/origin/p4', these @@ -114,7 +114,7 @@ from a Git remote, this can be useful in a multi-developer environment. If there are multiple branches, doing 'git p4 sync' will automatically use the "BRANCH DETECTION" algorithm to try to partition new changes -into the right branch. This can be overridden with the '--branch' +into the right branch. This can be overridden with the `--branch` option to specify just a single branch to update. @@ -134,7 +134,7 @@ Submit ~~~~~~ Submitting changes from a Git repository back to the p4 repository requires a separate p4 client workspace. This should be specified -using the 'P4CLIENT' environment variable or the Git configuration +using the `P4CLIENT` environment variable or the Git configuration variable 'git-p4.client'. The p4 client must exist, but the client root will be created and populated if it does not already exist. @@ -150,10 +150,10 @@ $ git p4 submit topicbranch ------------ The upstream reference is generally 'refs/remotes/p4/master', but can -be overridden using the '--origin=' command-line option. +be overridden using the `--origin=` command-line option. The p4 changes will be created as the user invoking 'git p4 submit'. The -'--preserve-user' option will cause ownership to be modified +`--preserve-user` option will cause ownership to be modified according to the author of the Git commit. This option requires admin privileges in p4, which can be granted using 'p4 protect'. @@ -166,7 +166,7 @@ General options All commands except clone accept these options. --git-dir <dir>:: - Set the 'GIT_DIR' environment variable. See linkgit:git[1]. + Set the `GIT_DIR` environment variable. See linkgit:git[1]. -v:: --verbose:: @@ -221,7 +221,7 @@ Git repository: where they will be treated as remote-tracking branches by linkgit:git-branch[1] and other commands. This option instead puts p4 branches in 'refs/heads/p4/'. Note that future - sync operations must specify '--import-local' as well so that + sync operations must specify `--import-local` as well so that they can find the p4 branches in refs/heads. --max-changes <n>:: @@ -245,7 +245,7 @@ Git repository: default, involves removing the entire depot path. With this option, the full p4 depot path is retained in Git. For example, path '//depot/main/foo/bar.c', when imported from - '//depot/main/', becomes 'foo/bar.c'. With '--keep-path', the + '//depot/main/', becomes 'foo/bar.c'. With `--keep-path`, the Git path is instead 'depot/main/foo/bar.c'. --use-client-spec:: @@ -275,7 +275,7 @@ These options can be used to modify 'git p4 submit' behavior. --origin <commit>:: Upstream location from which commits are identified to submit to p4. By default, this is the most recent p4 commit reachable - from 'HEAD'. + from `HEAD`. -M:: Detect renames. See linkgit:git-diff[1]. Renames will be @@ -341,7 +341,7 @@ p4 revision specifier on the end: Import all changes from both named depot paths into a single repository. Only files below these directories are included. There is not a subdirectory in Git for each "proj1" and "proj2". - You must use the '--destination' option when specifying more + You must use the `--destination` option when specifying more than one depot path. The revision specifier must be specified identically on each depot path. If there are files in the depot paths with the same name, the path with the most recently @@ -355,7 +355,7 @@ CLIENT SPEC The p4 client specification is maintained with the 'p4 client' command and contains among other fields, a View that specifies how the depot is mapped into the client repository. The 'clone' and 'sync' commands -can consult the client spec when given the '--use-client-spec' option or +can consult the client spec when given the `--use-client-spec` option or when the useClientSpec variable is true. After 'git p4 clone', the useClientSpec variable is automatically set in the repository configuration file. This allows future 'git p4 submit' commands to @@ -390,7 +390,7 @@ different areas in the tree, and indicate related content. 'git p4' can use these mappings to determine branch relationships. If you have a repository where all the branches of interest exist as -subdirectories of a single depot path, you can use '--detect-branches' +subdirectories of a single depot path, you can use `--detect-branches` when cloning or syncing to have 'git p4' automatically find subdirectories in p4, and to generate these as branches in Git. @@ -507,7 +507,7 @@ git-p4.labelImportRegexp:: git-p4.useClientSpec:: Specify that the p4 client spec should be used to identify p4 depot paths of interest. This is equivalent to specifying the - option '--use-client-spec'. See the "CLIENT SPEC" section above. + option `--use-client-spec`. See the "CLIENT SPEC" section above. This variable is a boolean, not the name of a p4 client. git-p4.pathEncoding:: @@ -515,20 +515,18 @@ git-p4.pathEncoding:: Git expects paths encoded as UTF-8. Use this config to tell git-p4 what encoding Perforce had used for the paths. This encoding is used to transcode the paths to UTF-8. As an example, Perforce on Windows - often uses “cp1252” to encode path names. + often uses "cp1252" to encode path names. git-p4.largeFileSystem:: Specify the system that is used for large (binary) files. Please note that large file systems do not support the 'git p4 submit' command. - Only Git LFS [1] is implemented right now. Download - and install the Git LFS command line extension to use this option - and configure it like this: + Only Git LFS is implemented right now (see https://git-lfs.github.com/ + for more information). Download and install the Git LFS command line + extension to use this option and configure it like this: + ------------- git config git-p4.largeFileSystem GitLFS ------------- -+ - [1] https://git-lfs.github.com/ git-p4.largeFileExtensions:: All files matching a file extension in the list will be processed @@ -553,6 +551,17 @@ git-p4.keepEmptyCommits:: A changelist that contains only excluded files will be imported as an empty commit if this boolean option is set to true. +git-p4.mapUser:: + Map a P4 user to a name and email address in Git. Use a string + with the following format to create a mapping: ++ +------------- +git config --add git-p4.mapUser "p4user = First Last <mail@address.com>" +------------- ++ +A mapping will override any user information from P4. Mappings for +multiple P4 user can be defined. + Submit variables ~~~~~~~~~~~~~~~~ git-p4.detectRenames:: diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index bbea5294ca..8973510a41 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -104,13 +104,14 @@ base-name:: out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The size can be suffixed with "k", "m", or "g". - `--window-memory=0` makes memory usage unlimited, which is the - default. + `--window-memory=0` makes memory usage unlimited. The default + is taken from the `pack.windowMemory` configuration variable. --max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. - If specified, multiple packfiles may be created. + If specified, multiple packfiles may be created, which also + prevents the creation of a bitmap index. The default is unlimited, unless the config variable `pack.packSizeLimit` is set. diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 93c72a29ce..d033b258e5 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -101,7 +101,7 @@ Options related to merging include::merge-options.txt[] -r:: ---rebase[=false|true|preserve]:: +--rebase[=false|true|preserve|interactive]:: When true, rebase the current branch on top of the upstream branch after fetching. If there is a remote-tracking branch corresponding to the upstream branch and the upstream branch @@ -113,6 +113,8 @@ to `git rebase` so that locally created merge commits will not be flattened. + When false, merge the current branch into the upstream branch. + +When `interactive`, enable the interactive mode of rebase. ++ See `pull.rebase`, `branch.<name>.rebase` and `branch.autoSetupRebase` in linkgit:git-config[1] if you want to make `git pull` always use `--rebase` instead of merging. @@ -126,6 +128,15 @@ unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: Override earlier --rebase. +--autostash:: +--no-autostash:: + Before starting rebase, stash local modifications away (see + linkgit:git-stash[1]) if needed, and apply the stash when + done. `--no-autostash` is useful to override the `rebase.autoStash` + configuration variable (see linkgit:git-config[1]). ++ +This option is only valid when "--rebase" is used. + Options related to fetching ~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 4c775bcec4..927a0341cf 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [--follow-tags] [--atomic] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] + [--repo=<repository>] [-f | --force] [-d | --delete] [--prune] [-v | --verbose] [-u | --set-upstream] [--[no-]signed|--sign=(true|false|if-asked)] [--force-with-lease[=<refname>[:<expect>]]] @@ -37,6 +37,13 @@ the default `<refspec>` by consulting `remote.*.push` configuration, and if it is not found, honors `push.default` configuration to decide what to push (See linkgit:git-config[1] for the meaning of `push.default`). +When neither the command-line nor the configuration specify what to +push, the default behavior is used, which corresponds to the `simple` +value for `push.default`: the current branch is pushed to the +corresponding upstream branch, but as a safety measure, the push is +aborted if the upstream branch does not have the same name as the +local one. + OPTIONS[[OPTIONS]] ------------------ @@ -130,8 +137,8 @@ already exists on the remote side. and also push annotated tags in `refs/tags` that are missing from the remote but are pointing at commit-ish that are reachable from the refs being pushed. This can also be specified - with configuration variable 'push.followTags'. For more - information, see 'push.followTags' in linkgit:git-config[1]. + with configuration variable `push.followTags`. For more + information, see `push.followTags` in linkgit:git-config[1]. --[no-]signed:: --sign=(true|false|if-asked):: @@ -191,10 +198,11 @@ branch we have for it. + `--force-with-lease=<refname>:<expect>` will protect the named ref (alone), if it is going to be updated, by requiring its current value to be -the same as the specified value <expect> (which is allowed to be +the same as the specified value `<expect>` (which is allowed to be different from the remote-tracking branch we have for the refname, or we do not even have to have such a remote-tracking branch when -this form is used). +this form is used). If `<expect>` is the empty string, then the named ref +must not already exist. + Note that all forms other than `--force-with-lease=<refname>:<expect>` that specifies the expected current value of the ref explicitly are @@ -233,7 +241,7 @@ origin +master` to force a push to the `master` branch). See the For every branch that is up to date or successfully pushed, add upstream (tracking) reference, used by argument-less linkgit:git-pull[1] and other commands. For more information, - see 'branch.<name>.merge' in linkgit:git-config[1]. + see `branch.<name>.merge` in linkgit:git-config[1]. --[no-]thin:: These options are passed to linkgit:git-send-pack[1]. A thin transfer @@ -268,7 +276,7 @@ origin +master` to force a push to the `master` branch). See the all submodules that changed in the revisions to be pushed will be pushed. If on-demand was not able to push all necessary revisions it will also be aborted and exit with non-zero status. A value of - 'no' or using '--no-recurse-submodules' can be used to override the + 'no' or using `--no-recurse-submodules` can be used to override the push.recurseSubmodules configuration variable when no submodule recursion is required. @@ -277,6 +285,13 @@ origin +master` to force a push to the `master` branch). See the default is --verify, giving the hook a chance to prevent the push. With --no-verify, the hook is bypassed completely. +-4:: +--ipv4:: + Use IPv4 addresses only, ignoring IPv6 addresses. + +-6:: +--ipv6:: + Use IPv6 addresses only, ignoring IPv4 addresses. include::urls-remotes.txt[] diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index ff633b0db7..8cf952b4de 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -46,14 +46,14 @@ OPTIONS The directory to find the quilt patches. + The default for the patch directory is patches -or the value of the $QUILT_PATCHES environment +or the value of the `$QUILT_PATCHES` environment variable. --series <file>:: The quilt series file. + The default for the series file is <patches>/series -or the value of the $QUILT_SERIES environment +or the value of the `$QUILT_SERIES` environment variable. GIT diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 6cca8bb51d..de222c81af 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -3,7 +3,7 @@ git-rebase(1) NAME ---- -git-rebase - Forward-port local commits to the updated upstream head +git-rebase - Reapply commits on top of another base tip SYNOPSIS -------- @@ -208,10 +208,10 @@ rebase.stat:: rebase. False by default. rebase.autoSquash:: - If set to true enable '--autosquash' option by default. + If set to true enable `--autosquash` option by default. rebase.autoStash:: - If set to true enable '--autostash' option by default. + If set to true enable `--autostash` option by default. rebase.missingCommitsCheck:: If set to "warn", print warnings about removed commits in @@ -220,7 +220,7 @@ rebase.missingCommitsCheck:: done. "ignore" by default. rebase.instructionFormat:: - Custom commit list format to use during an '--interactive' rebase. + Custom commit list format to use during an `--interactive` rebase. OPTIONS ------- @@ -391,9 +391,6 @@ idea unless you know what you are doing (see BUGS below). final history. <cmd> will be interpreted as one or more shell commands. + -This option can only be used with the `--interactive` option -(see INTERACTIVE MODE below). -+ You may execute several commands by either using one instance of `--exec` with several commands: + @@ -406,6 +403,9 @@ or by giving more than one `--exec`: If `--autosquash` is used, "exec" lines will not be appended for the intermediate commits, and will only appear at the end of each squash/fixup series. ++ +This uses the `--interactive` machinery internally, but it can be run +without an explicit `--interactive`. --root:: Rebase all commits reachable from <branch>, instead of @@ -428,9 +428,9 @@ squash/fixup series. "fixup! " or "squash! " after the first, in case you referred to an earlier fixup/squash with `git commit --fixup/--squash`. + -This option is only valid when the '--interactive' option is used. +This option is only valid when the `--interactive` option is used. + -If the '--autosquash' option is enabled by default using the +If the `--autosquash` option is enabled by default using the configuration variable `rebase.autoSquash`, this option can be used to override and disable this setting. diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 1d7eceaa93..577b969c1b 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -137,9 +137,9 @@ branches, adds to that list. Retrieves the URLs for a remote. Configurations for `insteadOf` and `pushInsteadOf` are expanded here. By default, only the first URL is listed. + -With '--push', push URLs are queried rather than fetch URLs. +With `--push`, push URLs are queried rather than fetch URLs. + -With '--all', all URLs for the remote will be listed. +With `--all`, all URLs for the remote will be listed. 'set-url':: @@ -147,11 +147,11 @@ Changes URLs for the remote. Sets first URL for remote <name> that matches regex <oldurl> (first URL if no <oldurl> is given) to <newurl>. If <oldurl> doesn't match any URL, an error occurs and nothing is changed. + -With '--push', push URLs are manipulated instead of fetch URLs. +With `--push`, push URLs are manipulated instead of fetch URLs. + -With '--add', instead of changing existing URLs, new URL is added. +With `--add`, instead of changing existing URLs, new URL is added. + -With '--delete', instead of changing existing URLs, all URLs matching +With `--delete`, instead of changing existing URLs, all URLs matching regex <url> are deleted for remote <name>. Trying to delete all non-push URLs is an error. + diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 0e0bd363d6..9597777ada 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -33,7 +33,7 @@ OPTIONS pack everything referenced into a single pack. Especially useful when packing a repository that is used for private development. Use - with '-d'. This will clean up the objects that `git prune` + with `-d`. This will clean up the objects that `git prune` leaves behind, but `git fsck --full --dangling` shows as dangling. + @@ -42,7 +42,7 @@ whole new pack in order to get any contained object, no matter how many other objects in that pack they already have locally. -A:: - Same as `-a`, unless '-d' is used. Then any unreachable + Same as `-a`, unless `-d` is used. Then any unreachable objects in a previous pack become loose, unpacked objects, instead of being left in the old pack. Unreachable objects are never intentionally added to a pack, even when repacking. @@ -100,13 +100,16 @@ other objects in that pack they already have locally. out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The size can be suffixed with "k", "m", or "g". - `--window-memory=0` makes memory usage unlimited, which is the - default. + `--window-memory=0` makes memory usage unlimited. The default + is taken from the `pack.windowMemory` configuration variable. + Note that the actual memory usage will be the limit multiplied + by the number of threads used by linkgit:git-pack-objects[1]. --max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. - If specified, multiple packfiles may be created. + If specified, multiple packfiles may be created, which also + prevents the creation of a bitmap index. The default is unlimited, unless the config variable `pack.packSizeLimit` is set. @@ -115,7 +118,8 @@ other objects in that pack they already have locally. Write a reachability bitmap index as part of the repack. This only makes sense when used with `-a` or `-A`, as the bitmaps must be able to refer to all reachable objects. This option - overrides the setting of `pack.writeBitmaps`. + overrides the setting of `repack.writeBitmaps`. This option + has no effect if multiple packfiles are created. --pack-kept-objects:: Include objects in `.keep` files when repacking. Note that we @@ -123,7 +127,7 @@ other objects in that pack they already have locally. This means that we may duplicate objects, but this makes the option safe to use when there are concurrent pushes or fetches. This option is generally only useful if you are writing bitmaps - with `-b` or `pack.writeBitmaps`, as it ensures that the + with `-b` or `repack.writeBitmaps`, as it ensures that the bitmapped packfile has the necessary objects. Configuration @@ -133,7 +137,7 @@ By default, the command passes `--delta-base-offset` option to 'git pack-objects'; this typically results in slightly smaller packs, but the generated packs are incompatible with versions of Git older than version 1.4.4. If you need to share your repository with such ancient Git -versions, either directly or via the dumb http or rsync protocol, then you +versions, either directly or via the dumb http protocol, then you need to set the configuration variable `repack.UseDeltaBaseOffset` to "false" and repack. Access from old Git versions over the native protocol is unaffected by this option as the conversion is performed on the fly diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index 8fff598fd6..e5c57ae6ef 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -51,7 +51,7 @@ $ git cat-file commit foo shows information about commit 'bar'. -The 'GIT_NO_REPLACE_OBJECTS' environment variable can be set to +The `GIT_NO_REPLACE_OBJECTS` environment variable can be set to achieve the same effect as the `--no-replace-objects` option. OPTIONS diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 573616a04a..837707a8fd 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -24,7 +24,7 @@ from the HEAD commit). Note: 'git revert' is used to record some new commits to reverse the effect of some earlier commits (often only a faulty one). If you want to throw away all uncommitted changes in your working directory, you -should see linkgit:git-reset[1], particularly the '--hard' option. If +should see linkgit:git-reset[1], particularly the `--hard` option. If you want to extract specific files as they were in another commit, you should see linkgit:git-checkout[1], specifically the `git checkout <commit> -- <filename>` syntax. Take care with these alternatives as @@ -37,7 +37,7 @@ OPTIONS For a more complete list of ways to spell commit names, see linkgit:gitrevisions[7]. Sets of commits can also be given but no traversal is done by - default, see linkgit:git-rev-list[1] and its '--no-walk' + default, see linkgit:git-rev-list[1] and its `--no-walk` option. -e:: diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 771a7b5b09..642d0ef199 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -47,18 +47,18 @@ Composing --annotate:: Review and edit each patch you're about to send. Default is the value - of 'sendemail.annotate'. See the CONFIGURATION section for - 'sendemail.multiEdit'. + of `sendemail.annotate`. See the CONFIGURATION section for + `sendemail.multiEdit`. --bcc=<address>,...:: Specify a "Bcc:" value for each email. Default is the value of - 'sendemail.bcc'. + `sendemail.bcc`. + This option may be specified multiple times. --cc=<address>,...:: Specify a starting "Cc:" value for each email. - Default is the value of 'sendemail.cc'. + Default is the value of `sendemail.cc`. + This option may be specified multiple times. @@ -66,7 +66,7 @@ This option may be specified multiple times. Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) to edit an introductory message for the patch series. + -When '--compose' is used, git send-email will use the From, Subject, and +When `--compose` is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank (or Git: prefixed) lines, the summary won't be sent, but From, Subject, @@ -74,12 +74,12 @@ and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. + -See the CONFIGURATION section for 'sendemail.multiEdit'. +See the CONFIGURATION section for `sendemail.multiEdit`. --from=<address>:: Specify the sender of the emails. If not specified on the command line, - the value of the 'sendemail.from' configuration option is used. If - neither the command-line option nor 'sendemail.from' are set, then the + the value of the `sendemail.from` configuration option is used. If + neither the command-line option nor `sendemail.from` are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by "git var -l". @@ -114,7 +114,7 @@ is not set, this will be prompted for. --to=<address>,...:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the - value of the 'sendemail.to' configuration value; if that is unspecified, + value of the `sendemail.to` configuration value; if that is unspecified, and --to-cmd is not specified, this will be prompted for. + This option may be specified multiple times. @@ -138,7 +138,7 @@ Note that no attempts whatsoever are made to validate the encoding. can be useful when the repository contains files that contain carriage returns, but makes the raw patch email file (as saved from a MUA) much harder to inspect manually. base64 is even more fool proof, but also - even more opaque. Default is the value of the 'sendemail.transferEncoding' + even more opaque. Default is the value of the `sendemail.transferEncoding` configuration value; if that is unspecified, git will use 8bit and not add a Content-Transfer-Encoding header. @@ -157,20 +157,20 @@ Sending subscribed to a list. In order to use the 'From' address, set the value to "auto". If you use the sendmail binary, you must have suitable privileges for the -f parameter. Default is the value of the - 'sendemail.envelopeSender' configuration variable; if that is + `sendemail.envelopeSender` configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of - 'sendemail.smtpEncryption'. + `sendemail.smtpEncryption`. --smtp-domain=<FQDN>:: Specifies the Fully Qualified Domain Name (FQDN) used in the HELO/EHLO command to the SMTP server. Some servers require the FQDN to match your IP address. If not set, git send-email attempts to determine your FQDN automatically. Default is the value of - 'sendemail.smtpDomain'. + `sendemail.smtpDomain`. --smtp-auth=<mechanisms>:: Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting @@ -182,19 +182,19 @@ $ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ... + If at least one of the specified mechanisms matches the ones advertised by the SMTP server and if it is supported by the utilized SASL library, the mechanism -is used for authentication. If neither 'sendemail.smtpAuth' nor '--smtp-auth' +is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth` is specified, all mechanisms supported by the SASL library can be used. --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as - the password. Default is the value of 'sendemail.smtpPass', - however '--smtp-pass' always overrides this value. + the password. Default is the value of `sendemail.smtpPass`, + however `--smtp-pass` always overrides this value. + Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with -'--smtp-user' or a 'sendemail.smtpUser'), but no password has been -specified (with '--smtp-pass' or 'sendemail.smtpPass'), then +`--smtp-user` or a `sendemail.smtpUser`), but no password has been +specified (with `--smtp-pass` or `sendemail.smtpPass`), then a password is obtained using 'git-credential'. --smtp-server=<host>:: @@ -202,7 +202,7 @@ a password is obtained using 'git-credential'. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; the program must support the `-i` option. Default value can - be specified by the 'sendemail.smtpServer' configuration + be specified by the `sendemail.smtpServer` configuration option; the built-in default is `/usr/sbin/sendmail` or `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. @@ -213,11 +213,11 @@ a password is obtained using 'git-credential'. submission port 587, or the common SSL smtp port 465); symbolic port names (e.g. "submission" instead of 587) are also accepted. The port can also be set with the - 'sendemail.smtpServerPort' configuration variable. + `sendemail.smtpServerPort` configuration variable. --smtp-server-option=<option>:: If set, specifies the outgoing SMTP server option to use. - Default value can be specified by the 'sendemail.smtpServerOption' + Default value can be specified by the `sendemail.smtpServerOption` configuration option. + The --smtp-server-option option must be repeated for each option you want @@ -234,13 +234,13 @@ must be used for each option. certificates concatenated together: see verify(1) -CAfile and -CApath for more information on these). Set it to an empty string to disable certificate verification. Defaults to the value of the - 'sendemail.smtpsslcertpath' configuration variable, if set, or the + `sendemail.smtpsslcertpath` configuration variable, if set, or the backing SSL library's compiled-in default otherwise (which should be the best choice on most platforms). --smtp-user=<user>:: - Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser'; - if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'), + Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`; + if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`), then authentication is not attempted. --smtp-debug=0|1:: @@ -261,25 +261,25 @@ Automating Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. - Default is the value of 'sendemail.ccCmd' configuration value. + Default is the value of `sendemail.ccCmd` configuration value. --[no-]chain-reply-to:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the - entire patch series. Disabled by default, but the 'sendemail.chainReplyTo' + entire patch series. Disabled by default, but the `sendemail.chainReplyTo` configuration variable can be used to enable it. --identity=<identity>:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. --[no-]signed-off-by-cc:: If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. Default is the value of 'sendemail.signedoffbycc' configuration + cc list. Default is the value of `sendemail.signedoffbycc` configuration value; if that is unspecified, default to --signed-off-by-cc. --[no-]cc-cover:: @@ -312,13 +312,13 @@ Automating - 'all' will suppress all auto cc values. -- + -Default is the value of 'sendemail.suppresscc' configuration value; if +Default is the value of `sendemail.suppresscc` configuration value; if that is unspecified, default to 'self' if --suppress-from is specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. - Default is the value of 'sendemail.suppressFrom' configuration + Default is the value of `sendemail.suppressFrom` configuration value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: @@ -330,7 +330,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified. + If disabled with "--no-thread", those headers will not be added (unless specified with --in-reply-to). Default is the value of the -'sendemail.thread' configuration value; if that is unspecified, +`sendemail.thread` configuration value; if that is unspecified, default to --thread. + It is up to the user to ensure that no In-Reply-To header already @@ -355,7 +355,7 @@ Administering - 'auto' is equivalent to 'cc' + 'compose' -- + -Default is the value of 'sendemail.confirm' configuration value; if that +Default is the value of `sendemail.confirm` configuration value; if that is unspecified, default to 'auto' unless any of the suppress options have been specified, in which case default to 'compose'. @@ -364,8 +364,8 @@ have been specified, in which case default to 'compose'. --[no-]format-patch:: When an argument may be understood either as a reference or as a file name, - choose to understand it as a format-patch argument ('--format-patch') - or as a file name ('--no-format-patch'). By default, when such a conflict + choose to understand it as a format-patch argument (`--format-patch`) + or as a file name (`--no-format-patch`). By default, when such a conflict occurs, git send-email will fail. --quiet:: @@ -381,8 +381,8 @@ have been specified, in which case default to 'compose'. is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. -- + -Default is the value of 'sendemail.validate'; if this is not set, -default to '--validate'. +Default is the value of `sendemail.validate`; if this is not set, +default to `--validate`. --force:: Send emails even if safety checks would prevent it. @@ -403,7 +403,7 @@ CONFIGURATION sendemail.aliasesFile:: To avoid typing long email addresses, point this to one or more - email aliases files. You must also supply 'sendemail.aliasFileType'. + email aliases files. You must also supply `sendemail.aliasFileType`. sendemail.aliasFileType:: Format of the file(s) specified in sendemail.aliasesFile. Must be @@ -428,13 +428,13 @@ sendmail;; sendemail.multiEdit:: If true (default), a single editor instance will be spawned to edit - files you have to edit (patches when '--annotate' is used, and the - summary when '--compose' is used). If false, files will be edited one + files you have to edit (patches when `--annotate` is used, and the + summary when `--compose` is used). If false, files will be edited one after the other, spawning a new editor each time. sendemail.confirm:: Sets the default for whether to confirm before sending. Must be - one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' + one of 'always', 'never', 'cc', 'compose', or 'auto'. See `--confirm` in the previous section for the meaning of these values. EXAMPLE @@ -450,6 +450,19 @@ edit ~/.gitconfig to specify your account settings: smtpUser = yourname@gmail.com smtpServerPort = 587 +If you have multifactor authentication setup on your gmail account, you will +need to generate an app-specific password for use with 'git send-email'. Visit +https://security.google.com/settings/security/apppasswords to setup an +app-specific password. Once setup, you can store it with the credentials +helper: + + $ git credential fill + protocol=smtp + host=smtp.gmail.com + username=youname@gmail.com + password=app-password + + Once your commits are ready to be sent to the mailing list, run the following commands: diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 6aa91e830c..a831dd0288 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -44,7 +44,7 @@ OPTIONS option, then the refs from stdin are processed after those on the command line. + -If '--stateless-rpc' is specified together with this option then +If `--stateless-rpc` is specified together with this option then the list of refs must be in packet format (pkt-line). Each ref must be in a separate packet, and the list must end with a flush packet. @@ -99,11 +99,11 @@ Specifying the Refs There are three ways to specify which refs to update on the remote end. -With '--all' flag, all refs that exist locally are transferred to +With `--all` flag, all refs that exist locally are transferred to the remote side. You cannot specify any '<ref>' if you use this flag. -Without '--all' and without any '<ref>', the heads that exist +Without `--all` and without any '<ref>', the heads that exist both on the local side and on the remote side are updated. When one or more '<ref>' are specified explicitly (whether on the @@ -134,13 +134,13 @@ name. See linkgit:git-rev-parse[1]. exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. -Without '--force', the <src> ref is stored at the remote only if +Without `--force`, the <src> ref is stored at the remote only if <dst> does not exist, or <dst> is a proper subset (i.e. an ancestor) of <src>. This check, known as "fast-forward check", is performed in order to avoid accidentally overwriting the remote ref and lose other peoples' commits from there. -With '--force', the fast-forward check is disabled for all refs. +With `--force`, the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 4f67c4cde6..8632612c31 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -41,7 +41,7 @@ usage:: die with the usage message. set_reflog_action:: - Set GIT_REFLOG_ACTION environment to a given string (typically + Set `GIT_REFLOG_ACTION` environment to a given string (typically the name of the program) unless it is already set. Whenever the script runs a `git` command that updates refs, a reflog entry is created using the value of this string to leave the diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt index e4bdd2235c..2e30a3e42d 100644 --- a/Documentation/git-shell.txt +++ b/Documentation/git-shell.txt @@ -24,7 +24,7 @@ named `git-shell-commands` in the user's home directory. COMMANDS -------- -'git shell' accepts the following commands after the '-c' option: +'git shell' accepts the following commands after the `-c` option: 'git receive-pack <argument>':: 'git upload-pack <argument>':: @@ -43,7 +43,7 @@ directory. INTERACTIVE USE --------------- -By default, the commands above can be executed only with the '-c' +By default, the commands above can be executed only with the `-c` option; the shell is not interactive. If a `~/git-shell-commands` directory is present, 'git shell' diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index b91d4e545b..7818e0f098 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -60,7 +60,7 @@ OPTIONS are shown before their parents). --date-order:: - This option is similar to '--topo-order' in the sense that no + This option is similar to `--topo-order` in the sense that no parent comes before all of its children, but otherwise commits are ordered according to their commit date. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 3a32451984..c0aa871c9e 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -60,7 +60,7 @@ OPTIONS Enable stricter reference checking by requiring an exact ref path. Aside from returning an error code of 1, it will also print an error - message if '--quiet' was not specified. + message if `--quiet` was not specified. --abbrev[=<n>]:: @@ -70,7 +70,7 @@ OPTIONS -q:: --quiet:: - Do not print any results to stdout. When combined with '--verify' this + Do not print any results to stdout. When combined with `--verify` this can be used to silently check if a reference exists. --exclude-existing[=<pattern>]:: @@ -134,7 +134,7 @@ use: This will show "refs/heads/master" but also "refs/remote/other-repo/master", if such references exists. -When using the '--verify' flag, the command requires an exact path: +When using the `--verify` flag, the command requires an exact path: ----------------------------------------------------------------------------- git show-ref --verify refs/heads/master diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1572f058f5..9226c4380c 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -13,10 +13,10 @@ SYNOPSIS [--reference <repository>] [--depth <depth>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] -'git submodule' [--quiet] deinit [-f|--force] [--] <path>... +'git submodule' [--quiet] deinit [-f|--force] (--all|[--] <path>...) 'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch] [-f|--force] [--rebase|--merge] [--reference <repository>] - [--depth <depth>] [--recursive] [--] [<path>...] + [--depth <depth>] [--recursive] [--jobs <n>] [--] [<path>...] 'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> @@ -140,12 +140,15 @@ deinit:: tree. Further calls to `git submodule update`, `git submodule foreach` and `git submodule sync` will skip any unregistered submodules until they are initialized again, so use this command if you don't want to - have a local checkout of the submodule in your work tree anymore. If + have a local checkout of the submodule in your working tree anymore. If you really want to remove a submodule from the repository and commit that use linkgit:git-rm[1] instead. + -If `--force` is specified, the submodule's work tree will be removed even if -it contains local modifications. +When the command is run without pathspec, it errors out, +instead of deinit-ing everything, to prevent mistakes. ++ +If `--force` is specified, the submodule's working tree will +be removed even if it contains local modifications. update:: + @@ -247,6 +250,10 @@ OPTIONS --quiet:: Only print error messages. +--all:: + This option is only valid for the deinit command. Unregister all + submodules in the working tree. + -b:: --branch:: Branch of repository to add as submodule. @@ -257,8 +264,8 @@ OPTIONS --force:: This option is only valid for add, deinit and update commands. When running add, allow adding an otherwise ignored submodule path. - When running deinit the submodule work trees will be removed even if - they contain local changes. + When running deinit the submodule working trees will be removed even + if they contain local changes. When running update (only effective with the checkout procedure), throw away local changes in submodules when switching to a different commit; and always run a checkout operation in the @@ -377,6 +384,11 @@ for linkgit:git-clone[1]'s `--reference` and `--shared` options carefully. clone with a history truncated to the specified number of revisions. See linkgit:git-clone[1] +-j <n>:: +--jobs <n>:: + This option is only valid for the update command. + Clone new submodules in parallel with as many jobs. + Defaults to the `submodule.fetchJobs` option. <path>...:: Paths to submodule(s). When specified this will restrict the command diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 0c0f60b20e..7e17cade7f 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -98,11 +98,11 @@ your Perl's Getopt::Long is < v2.37). --ignore-paths=<regex>;; When passed to 'init' or 'clone' this regular expression will be preserved as a config key. See 'fetch' for a description - of '--ignore-paths'. + of `--ignore-paths`. --include-paths=<regex>;; When passed to 'init' or 'clone' this regular expression will be preserved as a config key. See 'fetch' for a description - of '--include-paths'. + of `--include-paths`. --no-minimize-url;; When tracking multiple directories (using --stdlayout, --branches, or --tags options), git svn will attempt to connect @@ -110,7 +110,7 @@ your Perl's Getopt::Long is < v2.37). repository. This default allows better tracking of history if entire projects are moved within a repository, but may cause issues on repositories where read access restrictions are in - place. Passing '--no-minimize-url' will allow git svn to + place. Passing `--no-minimize-url` will allow git svn to accept URLs as-is without attempting to connect to a higher level directory. This option is off by default when only one URL/branch is tracked (it would do little good). @@ -141,7 +141,7 @@ the same local time zone. --ignore-paths=<regex>;; This allows one to specify a Perl regular expression that will cause skipping of all matching paths from checkout from SVN. - The '--ignore-paths' option should match for every 'fetch' + The `--ignore-paths` option should match for every 'fetch' (including automatic fetches due to 'clone', 'dcommit', 'rebase', etc) on a given repository. + @@ -170,10 +170,10 @@ Skip "branches" and "tags" of first level directories;; --include-paths=<regex>;; This allows one to specify a Perl regular expression that will cause the inclusion of only matching paths from checkout from SVN. - The '--include-paths' option should match for every 'fetch' + The `--include-paths` option should match for every 'fetch' (including automatic fetches due to 'clone', 'dcommit', - 'rebase', etc) on a given repository. '--ignore-paths' takes - precedence over '--include-paths'. + 'rebase', etc) on a given repository. `--ignore-paths` takes + precedence over `--include-paths`. + [verse] config key: svn-remote.<name>.include-paths @@ -191,7 +191,7 @@ config key: svn-remote.<name>.include-paths or if a second argument is passed; it will create a directory and work within that. It accepts all arguments that the 'init' and 'fetch' commands accept; with the exception of - '--fetch-all' and '--parent'. After a repository is cloned, + `--fetch-all` and `--parent`. After a repository is cloned, the 'fetch' command will be able to update revisions without affecting the working tree; and the 'rebase' command will be able to update the working tree with the latest changes. @@ -216,7 +216,7 @@ it preserves linear history with 'git rebase' instead of 'git merge' for ease of dcommitting with 'git svn'. + This accepts all options that 'git svn fetch' and 'git rebase' -accept. However, '--fetch-all' only fetches from the current +accept. However, `--fetch-all` only fetches from the current [svn-remote], and not all [svn-remote] definitions. + Like 'git rebase'; this requires that the working tree be clean @@ -459,6 +459,20 @@ Any other arguments are passed directly to 'git log' Gets the Subversion property given as the first argument, for a file. A specific revision can be specified with -r/--revision. +'propset':: + Sets the Subversion property given as the first argument, to the + value given as the second argument for the file given as the + third argument. ++ +Example: ++ +------------------------------------------------------------------------ +git svn propset svn:keywords "FreeBSD=%H" devel/py-tipper/Makefile +------------------------------------------------------------------------ ++ +This will set the property 'svn:keywords' to 'FreeBSD=%H' for the file +'devel/py-tipper/Makefile'. + 'show-externals':: Shows the Subversion externals. Use -r/--revision to specify a specific revision. @@ -748,7 +762,7 @@ svn-remote.<name>.rewriteUUID:: svn-remote.<name>.pushurl:: - Similar to Git's 'remote.<name>.pushurl', this key is designed + Similar to Git's `remote.<name>.pushurl`, this key is designed to be used in cases where 'url' points to an SVN repository via a read-only transport, to provide an alternate read/write transport. It is assumed that both keys point to the same @@ -905,7 +919,7 @@ parent of the branch. However, it is possible that there is no suitable Git commit to serve as parent. This will happen, among other reasons, if the SVN branch is a copy of a revision that was not fetched by 'git svn' (e.g. because it is an old revision that was skipped with -'--revision'), or if in SVN a directory was copied that is not tracked +`--revision`), or if in SVN a directory was copied that is not tracked by 'git svn' (such as a branch that is not tracked at all, or a subdirectory of a tracked branch). In these cases, 'git svn' will still create a Git branch, but instead of using an existing Git commit as the @@ -982,12 +996,12 @@ directories in the working copy. While this is the easiest way to get a copy of a complete repository, for projects with many branches it will lead to a working copy many times larger than just the trunk. Thus for projects using the standard directory structure (trunk/branches/tags), -it is recommended to clone with option '--stdlayout'. If the project +it is recommended to clone with option `--stdlayout`. If the project uses a non-standard structure, and/or if branches and tags are not required, it is easiest to only clone one directory (typically trunk), without giving any repository layout options. If the full history with -branches and tags is required, the options '--trunk' / '--branches' / -'--tags' must be used. +branches and tags is required, the options `--trunk` / `--branches` / +`--tags` must be used. When using multiple --branches or --tags, 'git svn' does not automatically handle name collisions (for example, if two branches from different paths have @@ -1034,6 +1048,8 @@ listed below are allowed: url = http://server.org/svn fetch = trunk/project-a:refs/remotes/project-a/trunk branches = branches/*/project-a:refs/remotes/project-a/branches/* + branches = branches/release_*:refs/remotes/project-a/branches/release_* + branches = branches/re*se:refs/remotes/project-a/branches/* tags = tags/*/project-a:refs/remotes/project-a/tags/* ------------------------------------------------------------------------ @@ -1044,6 +1060,16 @@ independent path component (surrounded by '/' or EOL). This type of configuration is not automatically created by 'init' and should be manually entered with a text-editor or using 'git config'. +Also note that only one asterisk is allowed per word. For example: + + branches = branches/re*se:refs/remotes/project-a/branches/* + +will match branches 'release', 'rese', 're123se', however + + branches = branches/re*s*e:refs/remotes/project-a/branches/* + +will produce an error. + It is also possible to fetch a subset of branches or tags by using a comma-separated list of names within braces. For example: diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index abab4814ec..7ecca8e247 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -78,7 +78,7 @@ OPTIONS -v:: --verify:: - Verify the gpg signature of the given tag names. + Verify the GPG signature of the given tag names. -n<num>:: <num> specifies how many lines from the annotation, if any, @@ -104,7 +104,7 @@ OPTIONS order can also be affected by the "versionsort.prereleaseSuffix" configuration variable. The keys supported are the same as those in `git for-each-ref`. - Sort order defaults to the value configured for the 'tag.sort' + Sort order defaults to the value configured for the `tag.sort` variable if it exists, or lexicographic order otherwise. See linkgit:git-config[1]. @@ -167,7 +167,7 @@ This option is only applicable when listing tags without annotation lines. --[no-]merged [<commit>]:: Only list tags whose tips are reachable, or not reachable - if '--no-merged' is used, from the specified commit ('HEAD' + if `--no-merged` is used, from the specified commit (`HEAD` if not specified). CONFIGURATION diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index f4e5a85351..7386c93162 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -18,7 +18,7 @@ SYNOPSIS [--[no-]skip-worktree] [--ignore-submodules] [--[no-]split-index] - [--[no-|force-]untracked-cache] + [--[no-|test-|force-]untracked-cache] [--really-refresh] [--unresolve] [--again | -g] [--info-only] [--index-info] [-z] [--stdin] [--index-version <n>] @@ -102,7 +102,7 @@ thus, in case the assumed-untracked file is changed upstream, you will need to handle the situation manually. --really-refresh:: - Like '--refresh', but checks stat information unconditionally, + Like `--refresh`, but checks stat information unconditionally, without regard to the "assume unchanged" setting. --[no-]skip-worktree:: @@ -174,17 +174,30 @@ may not support it yet. --untracked-cache:: --no-untracked-cache:: - Enable or disable untracked cache extension. This could speed - up for commands that involve determining untracked files such - as `git status`. The underlying operating system and file - system must change `st_mtime` field of a directory if files - are added or deleted in that directory. + Enable or disable untracked cache feature. Please use + `--test-untracked-cache` before enabling it. ++ +These options take effect whatever the value of the `core.untrackedCache` +configuration variable (see linkgit:git-config[1]). But a warning is +emitted when the change goes against the configured value, as the +configured value will take effect next time the index is read and this +will remove the intended effect of the option. + +--test-untracked-cache:: + Only perform tests on the working directory to make sure + untracked cache can be used. You have to manually enable + untracked cache using `--untracked-cache` or + `--force-untracked-cache` or the `core.untrackedCache` + configuration variable afterwards if you really want to use + it. If a test fails the exit code is 1 and a message + explains what is not working as needed, otherwise the exit + code is 0 and OK is printed. --force-untracked-cache:: - For safety, `--untracked-cache` performs tests on the working - directory to make sure untracked cache can be used. These - tests can take a few seconds. `--force-untracked-cache` can be - used to skip the tests. + Same as `--untracked-cache`. Provided for backwards + compatibility with older versions of Git where + `--untracked-cache` used to imply `--test-untracked-cache` but + this option would enable the extension unconditionally. \--:: Do not interpret any more arguments as options. @@ -198,7 +211,7 @@ may not support it yet. Using --refresh --------------- -'--refresh' does not calculate a new sha1 file or bring the index +`--refresh` does not calculate a new sha1 file or bring the index up-to-date for mode/content changes. But what it *does* do is to "re-match" the stat information of a file with the index, so that you can refresh the index for a file that hasn't been changed but where @@ -209,7 +222,7 @@ up the stat index details with the proper files. Using --cacheinfo or --info-only -------------------------------- -'--cacheinfo' is used to register a file that is not in the +`--cacheinfo` is used to register a file that is not in the current working directory. This is useful for minimum-checkout merging. @@ -219,12 +232,12 @@ To pretend you have a file with mode and sha1 at path, say: $ git update-index --cacheinfo <mode>,<sha1>,<path> ---------------- -'--info-only' is used to register files without placing them in the object +`--info-only` is used to register files without placing them in the object database. This is useful for status-only repositories. -Both '--cacheinfo' and '--info-only' behave similarly: the index is updated -but the object database isn't. '--cacheinfo' is useful when the object is -in the database but the file isn't available locally. '--info-only' is +Both `--cacheinfo` and `--info-only` behave similarly: the index is updated +but the object database isn't. `--cacheinfo` is useful when the object is +in the database but the file isn't available locally. `--info-only` is useful when the file is available, but you do not wish to update the object database. @@ -375,6 +388,37 @@ Although this bit looks similar to assume-unchanged bit, its goal is different from assume-unchanged bit's. Skip-worktree also takes precedence over assume-unchanged bit when both are set. +Untracked cache +--------------- + +This cache is meant to speed up commands that involve determining +untracked files such as `git status`. + +This feature works by recording the mtime of the working tree +directories and then omitting reading directories and stat calls +against files in those directories whose mtime hasn't changed. For +this to work the underlying operating system and file system must +change the `st_mtime` field of directories if files in the directory +are added, modified or deleted. + +You can test whether the filesystem supports that with the +`--test-untracked-cache` option. The `--untracked-cache` option used +to implicitly perform that test in older versions of Git, but that's +no longer the case. + +If you want to enable (or disable) this feature, it is easier to use +the `core.untrackedCache` configuration variable (see +linkgit:git-config[1]) than using the `--untracked-cache` option to +`git update-index` in each repository, especially if you want to do so +across all repositories you use, because you can set the configuration +variable to `true` (or `false`) in your `$HOME/.gitconfig` just once +and have it affect all repositories you touch. + +When the `core.untrackedCache` configuration variable is changed, the +untracked cache is added to or removed from the index the next time a +command reads the index; while when `--[no-|force-]untracked-cache` +are used, the untracked cache is immediately added to or removed from +the index. Configuration ------------- @@ -400,6 +444,9 @@ It can be useful when the inode change time is regularly modified by something outside Git (file system crawlers and backup systems use ctime for marking files processed) (see linkgit:git-config[1]). +The untracked cache extension can be enabled by the +`core.untrackedCache` configuration variable (see +linkgit:git-config[1]). SEE ALSO -------- diff --git a/Documentation/git-verify-commit.txt b/Documentation/git-verify-commit.txt index ecf4da16cf..92097f6673 100644 --- a/Documentation/git-verify-commit.txt +++ b/Documentation/git-verify-commit.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -Validates the gpg signature created by 'git commit -S'. +Validates the GPG signature created by 'git commit -S'. OPTIONS ------- diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index 16ede5b4c3..2d6b09a43c 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -62,14 +62,14 @@ CONF.VAR (from -c option) and web.browser ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The web browser can be specified using a configuration variable passed -with the -c (or --config) command-line option, or the 'web.browser' +with the -c (or --config) command-line option, or the `web.browser` configuration variable if the former is not used. browser.<tool>.path ~~~~~~~~~~~~~~~~~~~ You can explicitly provide a full path to your preferred browser by -setting the configuration variable 'browser.<tool>.path'. For example, +setting the configuration variable `browser.<tool>.path`. For example, you can configure the absolute path to firefox by setting 'browser.firefox.path'. Otherwise, 'git web{litdd}browse' assumes the tool is available in PATH. @@ -79,7 +79,7 @@ browser.<tool>.cmd When the browser, specified by options or configuration variables, is not among the supported ones, then the corresponding -'browser.<tool>.cmd' configuration variable will be looked up. If this +`browser.<tool>.cmd` configuration variable will be looked up. If this variable exists then 'git web{litdd}browse' will treat the specified tool as a custom command and will use a shell eval to run the command with the URLs passed as arguments. @@ -110,7 +110,7 @@ Note about git-config --global ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Note that these configuration variables should probably be set using -the '--global' flag, for example like this: +the `--global` flag, for example like this: ------------------------------------------------ $ git config --global web.browser firefox diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 5b9ad0429c..c62234538b 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -9,7 +9,7 @@ git-worktree - Manage multiple working trees SYNOPSIS -------- [verse] -'git worktree add' [-f] [--detach] [-b <new-branch>] <path> [<branch>] +'git worktree add' [-f] [--detach] [--checkout] [-b <new-branch>] <path> [<branch>] 'git worktree prune' [-n] [-v] [--expire <expire>] 'git worktree list' [--porcelain] @@ -32,11 +32,9 @@ The working tree's administrative files in the repository (see `git worktree prune` in the main or any linked working tree to clean up any stale administrative files. -If you move a linked working tree to another file system, or -within a file system that does not support hard links, you need to run -at least one git command inside the linked working tree -(e.g. `git status`) in order to update its administrative files in the -repository so that they do not get automatically pruned. +If you move a linked working tree, you need to manually update the +administrative files so that they do not get pruned automatically. See +section "DETAILS" for more information. If a linked working tree is stored on a portable device or network share which is not always mounted, you can prevent its administrative files from @@ -89,6 +87,12 @@ OPTIONS With `add`, detach HEAD in the new working tree. See "DETACHED HEAD" in linkgit:git-checkout[1]. +--[no-]checkout:: + By default, `add` checks out `<branch>`, however, `--no-checkout` can + be used to suppress checkout in order to make customizations, + such as configuring sparse-checkout. See "Sparse checkout" + in linkgit:git-read-tree[1]. + -n:: --dry-run:: With `prune`, do not remove anything; just report what it would @@ -137,6 +141,13 @@ thumb is do not make any assumption about whether a path belongs to $GIT_DIR or $GIT_COMMON_DIR when you need to directly access something inside $GIT_DIR. Use `git rev-parse --git-path` to get the final path. +If you move a linked working tree, you need to update the 'gitdir' file +in the entry's directory. For example, if a linked working tree is moved +to `/newpath/test-next` and its `.git` file points to +`/path/main/.git/worktrees/test-next`, then update +`/path/main/.git/worktrees/test-next/gitdir` to reference `/newpath/test-next` +instead. + To prevent a $GIT_DIR/worktrees entry from being pruned (which can be useful in some situations, such as when the entry's working tree is stored on a portable device), add a file named diff --git a/Documentation/git.txt b/Documentation/git.txt index d987ad20c9..923aa49db7 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -31,8 +31,8 @@ page to learn what commands Git offers. You can learn more about individual Git commands with "git help command". linkgit:gitcli[7] manual page gives you an overview of the command-line command syntax. -Formatted and hyperlinked version of the latest Git documentation -can be viewed at `http://git-htmldocs.googlecode.com/git/git.html`. +A formatted and hyperlinked copy of the latest Git documentation +can be viewed at `https://git.github.io/htmldocs/git.html`. ifdef::stalenotes[] [NOTE] @@ -43,15 +43,35 @@ unreleased) version of Git, that is available from the 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v2.7.1/git.html[documentation for release 2.7.1] +* link:v2.9.3/git.html[documentation for release 2.9.3] * release notes for + link:RelNotes/2.9.3.txt[2.9.3], + link:RelNotes/2.9.2.txt[2.9.2], + link:RelNotes/2.9.1.txt[2.9.1], + link:RelNotes/2.9.0.txt[2.9]. + +* link:v2.8.4/git.html[documentation for release 2.8.4] + +* release notes for + link:RelNotes/2.8.4.txt[2.8.4], + link:RelNotes/2.8.3.txt[2.8.3], + link:RelNotes/2.8.2.txt[2.8.2], + link:RelNotes/2.8.1.txt[2.8.1], + link:RelNotes/2.8.0.txt[2.8]. + +* link:v2.7.3/git.html[documentation for release 2.7.3] + +* release notes for + link:RelNotes/2.7.3.txt[2.7.3], + link:RelNotes/2.7.2.txt[2.7.2], link:RelNotes/2.7.1.txt[2.7.1], link:RelNotes/2.7.0.txt[2.7]. -* link:v2.6.5/git.html[documentation for release 2.6.5] +* link:v2.6.6/git.html[documentation for release 2.6.6] * release notes for + link:RelNotes/2.6.6.txt[2.6.6], link:RelNotes/2.6.5.txt[2.6.5], link:RelNotes/2.6.4.txt[2.6.4], link:RelNotes/2.6.3.txt[2.6.3], @@ -59,18 +79,20 @@ Documentation for older releases are available here: link:RelNotes/2.6.1.txt[2.6.1], link:RelNotes/2.6.0.txt[2.6]. -* link:v2.5.4/git.html[documentation for release 2.5.4] +* link:v2.5.5/git.html[documentation for release 2.5.5] * release notes for + link:RelNotes/2.5.5.txt[2.5.5], link:RelNotes/2.5.4.txt[2.5.4], link:RelNotes/2.5.3.txt[2.5.3], link:RelNotes/2.5.2.txt[2.5.2], link:RelNotes/2.5.1.txt[2.5.1], link:RelNotes/2.5.0.txt[2.5]. -* link:v2.4.10/git.html[documentation for release 2.4.10] +* link:v2.4.11/git.html[documentation for release 2.4.11] * release notes for + link:RelNotes/2.4.11.txt[2.4.11], link:RelNotes/2.4.10.txt[2.4.10], link:RelNotes/2.4.9.txt[2.4.9], link:RelNotes/2.4.8.txt[2.4.8], @@ -494,7 +516,7 @@ OPTIONS --help:: Prints the synopsis and a list of the most commonly used - commands. If the option '--all' or '-a' is given then all + commands. If the option `--all` or `-a` is given then all available commands are printed. If a Git command is named this option will bring up the manual page for that command. + @@ -558,7 +580,7 @@ foo.bar= ...`) sets `foo.bar` to the empty string. --git-dir=<path>:: Set the path to the repository. This can also be controlled by - setting the GIT_DIR environment variable. It can be an absolute + setting the `GIT_DIR` environment variable. It can be an absolute path or relative path to current working directory. --work-tree=<path>:: @@ -808,46 +830,46 @@ These environment variables apply to 'all' core Git commands. Nb: it is worth noting that they may be used/overridden by SCMS sitting above Git so take care if using a foreign front-end. -'GIT_INDEX_FILE':: +`GIT_INDEX_FILE`:: This environment allows the specification of an alternate index file. If not specified, the default of `$GIT_DIR/index` is used. -'GIT_INDEX_VERSION':: +`GIT_INDEX_VERSION`:: This environment variable allows the specification of an index version for new repositories. It won't affect existing index files. By default index file version 2 or 3 is used. See linkgit:git-update-index[1] for more information. -'GIT_OBJECT_DIRECTORY':: +`GIT_OBJECT_DIRECTORY`:: If the object storage directory is specified via this environment variable then the sha1 directories are created underneath - otherwise the default `$GIT_DIR/objects` directory is used. -'GIT_ALTERNATE_OBJECT_DIRECTORIES':: +`GIT_ALTERNATE_OBJECT_DIRECTORIES`:: Due to the immutable nature of Git objects, old objects can be archived into shared, read-only directories. This variable specifies a ":" separated (on Windows ";" separated) list of Git object directories which can be used to search for Git objects. New objects will not be written to these directories. -'GIT_DIR':: - If the 'GIT_DIR' environment variable is set then it +`GIT_DIR`:: + If the `GIT_DIR` environment variable is set then it specifies a path to use instead of the default `.git` for the base of the repository. - The '--git-dir' command-line option also sets this value. + The `--git-dir` command-line option also sets this value. -'GIT_WORK_TREE':: +`GIT_WORK_TREE`:: Set the path to the root of the working tree. - This can also be controlled by the '--work-tree' command-line + This can also be controlled by the `--work-tree` command-line option and the core.worktree configuration variable. -'GIT_NAMESPACE':: +`GIT_NAMESPACE`:: Set the Git namespace; see linkgit:gitnamespaces[7] for details. - The '--namespace' command-line option also sets this value. + The `--namespace` command-line option also sets this value. -'GIT_CEILING_DIRECTORIES':: +`GIT_CEILING_DIRECTORIES`:: This should be a colon-separated list of absolute paths. If set, it is a list of directories that Git should not chdir up into while looking for a repository directory (useful for @@ -860,19 +882,19 @@ Git so take care if using a foreign front-end. can add an empty entry to the list to tell Git that the subsequent entries are not symlinks and needn't be resolved; e.g., - 'GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink'. + `GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink`. -'GIT_DISCOVERY_ACROSS_FILESYSTEM':: +`GIT_DISCOVERY_ACROSS_FILESYSTEM`:: When run in a directory that does not have ".git" repository directory, Git tries to find such a directory in the parent directories to find the top of the working tree, but by default it does not cross filesystem boundaries. This environment variable can be set to true to tell Git not to stop at filesystem - boundaries. Like 'GIT_CEILING_DIRECTORIES', this will not affect - an explicit repository directory set via 'GIT_DIR' or on the + boundaries. Like `GIT_CEILING_DIRECTORIES`, this will not affect + an explicit repository directory set via `GIT_DIR` or on the command line. -'GIT_COMMON_DIR':: +`GIT_COMMON_DIR`:: If this variable is set to a path, non-worktree files that are normally in $GIT_DIR will be taken from this path instead. Worktree-specific files such as HEAD or index are @@ -883,28 +905,28 @@ Git so take care if using a foreign front-end. Git Commits ~~~~~~~~~~~ -'GIT_AUTHOR_NAME':: -'GIT_AUTHOR_EMAIL':: -'GIT_AUTHOR_DATE':: -'GIT_COMMITTER_NAME':: -'GIT_COMMITTER_EMAIL':: -'GIT_COMMITTER_DATE':: +`GIT_AUTHOR_NAME`:: +`GIT_AUTHOR_EMAIL`:: +`GIT_AUTHOR_DATE`:: +`GIT_COMMITTER_NAME`:: +`GIT_COMMITTER_EMAIL`:: +`GIT_COMMITTER_DATE`:: 'EMAIL':: see linkgit:git-commit-tree[1] Git Diffs ~~~~~~~~~ -'GIT_DIFF_OPTS':: +`GIT_DIFF_OPTS`:: Only valid setting is "--unified=??" or "-u??" to set the number of context lines shown when a unified diff is created. This takes precedence over any "-U" or "--unified" option value passed on the Git diff command line. -'GIT_EXTERNAL_DIFF':: - When the environment variable 'GIT_EXTERNAL_DIFF' is set, the +`GIT_EXTERNAL_DIFF`:: + When the environment variable `GIT_EXTERNAL_DIFF` is set, the program named by it is called, instead of the diff invocation described above. For a path that is added, removed, or modified, - 'GIT_EXTERNAL_DIFF' is called with 7 parameters: + `GIT_EXTERNAL_DIFF` is called with 7 parameters: path old-file old-hex old-mode new-file new-hex new-mode + @@ -918,49 +940,49 @@ where: The file parameters can point at the user's working file (e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` when a new file is added), or a temporary file (e.g. `old-file` in the -index). 'GIT_EXTERNAL_DIFF' should not worry about unlinking the -temporary file --- it is removed when 'GIT_EXTERNAL_DIFF' exits. +index). `GIT_EXTERNAL_DIFF` should not worry about unlinking the +temporary file --- it is removed when `GIT_EXTERNAL_DIFF` exits. + -For a path that is unmerged, 'GIT_EXTERNAL_DIFF' is called with 1 +For a path that is unmerged, `GIT_EXTERNAL_DIFF` is called with 1 parameter, <path>. + -For each path 'GIT_EXTERNAL_DIFF' is called, two environment variables, -'GIT_DIFF_PATH_COUNTER' and 'GIT_DIFF_PATH_TOTAL' are set. +For each path `GIT_EXTERNAL_DIFF` is called, two environment variables, +`GIT_DIFF_PATH_COUNTER` and `GIT_DIFF_PATH_TOTAL` are set. -'GIT_DIFF_PATH_COUNTER':: +`GIT_DIFF_PATH_COUNTER`:: A 1-based counter incremented by one for every path. -'GIT_DIFF_PATH_TOTAL':: +`GIT_DIFF_PATH_TOTAL`:: The total number of paths. other ~~~~~ -'GIT_MERGE_VERBOSITY':: +`GIT_MERGE_VERBOSITY`:: A number controlling the amount of output shown by the recursive merge strategy. Overrides merge.verbosity. See linkgit:git-merge[1] -'GIT_PAGER':: +`GIT_PAGER`:: This environment variable overrides `$PAGER`. If it is set to an empty string or to the value "cat", Git will not launch a pager. See also the `core.pager` option in linkgit:git-config[1]. -'GIT_EDITOR':: +`GIT_EDITOR`:: This environment variable overrides `$EDITOR` and `$VISUAL`. It is used by several Git commands when, on interactive mode, an editor is to be launched. See also linkgit:git-var[1] and the `core.editor` option in linkgit:git-config[1]. -'GIT_SSH':: -'GIT_SSH_COMMAND':: +`GIT_SSH`:: +`GIT_SSH_COMMAND`:: If either of these environment variables is set then 'git fetch' and 'git push' will use the specified command instead of 'ssh' when they need to connect to a remote system. The command will be given exactly two or four arguments: the 'username@host' (or just 'host') from the URL and the shell command to execute on that remote system, optionally preceded by - '-p' (literally) and the 'port' from the URL when it specifies + `-p` (literally) and the 'port' from the URL when it specifies something other than the default SSH port. + `$GIT_SSH_COMMAND` takes precedence over `$GIT_SSH`, and is interpreted @@ -973,18 +995,18 @@ Usually it is easier to configure any desired options through your personal `.ssh/config` file. Please consult your ssh documentation for further details. -'GIT_ASKPASS':: +`GIT_ASKPASS`:: If this environment variable is set, then Git commands which need to acquire passwords or passphrases (e.g. for HTTP or IMAP authentication) will call this program with a suitable prompt as command-line argument - and read the password from its STDOUT. See also the 'core.askPass' + and read the password from its STDOUT. See also the `core.askPass` option in linkgit:git-config[1]. -'GIT_TERMINAL_PROMPT':: +`GIT_TERMINAL_PROMPT`:: If this environment variable is set to `0`, git will not prompt on the terminal (e.g., when asking for HTTP authentication). -'GIT_CONFIG_NOSYSTEM':: +`GIT_CONFIG_NOSYSTEM`:: Whether to skip reading settings from the system-wide `$(prefix)/etc/gitconfig` file. This environment variable can be used along with `$HOME` and `$XDG_CONFIG_HOME` to create a @@ -992,7 +1014,7 @@ for further details. temporarily to avoid using a buggy `/etc/gitconfig` file while waiting for someone with sufficient permissions to fix it. -'GIT_FLUSH':: +`GIT_FLUSH`:: If this environment variable is set to "1", then commands such as 'git blame' (in incremental mode), 'git rev-list', 'git log', 'git check-attr' and 'git check-ignore' will @@ -1003,7 +1025,7 @@ for further details. not set, Git will choose buffered or record-oriented flushing based on whether stdout appears to be redirected to a file or not. -'GIT_TRACE':: +`GIT_TRACE`:: Enables general trace messages, e.g. alias expansion, built-in command execution and external command execution. + @@ -1024,21 +1046,21 @@ into it. Unsetting the variable, or setting it to empty, "0" or "false" (case insensitive) disables trace messages. -'GIT_TRACE_PACK_ACCESS':: +`GIT_TRACE_PACK_ACCESS`:: Enables trace messages for all accesses to any packs. For each access, the pack file name and an offset in the pack is recorded. This may be helpful for troubleshooting some pack-related performance problems. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_PACKET':: +`GIT_TRACE_PACKET`:: Enables trace messages for all packets coming in or out of a given program. This can help with debugging object negotiation or other protocol issues. Tracing is turned off at a packet - starting with "PACK" (but see 'GIT_TRACE_PACKFILE' below). - See 'GIT_TRACE' for available trace output options. + starting with "PACK" (but see `GIT_TRACE_PACKFILE` below). + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_PACKFILE':: +`GIT_TRACE_PACKFILE`:: Enables tracing of packfiles sent or received by a given program. Unlike other trace output, this trace is verbatim: no headers, and no quoting of binary data. You almost @@ -1049,22 +1071,22 @@ Unsetting the variable, or setting it to empty, "0" or Note that this is currently only implemented for the client side of clones and fetches. -'GIT_TRACE_PERFORMANCE':: +`GIT_TRACE_PERFORMANCE`:: Enables performance related trace messages, e.g. total execution time of each Git command. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_SETUP':: +`GIT_TRACE_SETUP`:: Enables trace messages printing the .git, working tree and current working directory after Git has completed its setup phase. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_SHALLOW':: +`GIT_TRACE_SHALLOW`:: Enables trace messages that can help debugging fetching / cloning of shallow repositories. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_LITERAL_PATHSPECS':: +`GIT_LITERAL_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs literally, rather than as glob patterns. For example, running `GIT_LITERAL_PATHSPECS=1 git log -- '*.c'` will search @@ -1073,19 +1095,19 @@ of clones and fetches. literal paths to Git (e.g., paths previously given to you by `git ls-tree`, `--raw` diff output, etc). -'GIT_GLOB_PATHSPECS':: +`GIT_GLOB_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as glob patterns (aka "glob" magic). -'GIT_NOGLOB_PATHSPECS':: +`GIT_NOGLOB_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as literal (aka "literal" magic). -'GIT_ICASE_PATHSPECS':: +`GIT_ICASE_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as case-insensitive. -'GIT_REFLOG_ACTION':: +`GIT_REFLOG_ACTION`:: When a ref is updated, reflog entries are created to keep track of the reason why the ref was updated (which is typically the name of the high-level command that updated @@ -1095,7 +1117,7 @@ of clones and fetches. variable when it is invoked as the top level command by the end user, to be recorded in the body of the reflog. -'GIT_REF_PARANOIA':: +`GIT_REF_PARANOIA`:: If set to `1`, include broken or badly named refs when iterating over lists of refs. In a normal, non-corrupted repository, this does nothing. However, enabling it may help git to detect and @@ -1106,7 +1128,7 @@ of clones and fetches. an operation has touched every ref (e.g., because you are cloning a repository to make a backup). -'GIT_ALLOW_PROTOCOL':: +`GIT_ALLOW_PROTOCOL`:: If set, provide a colon-separated list of protocols which are allowed to be used with fetch/push/clone. This is useful to restrict recursive submodule initialization from an untrusted @@ -1122,9 +1144,7 @@ of clones and fetches. connection (or proxy, if configured) - `ssh`: git over ssh (including `host:path` syntax, - `git+ssh://`, etc). - - - `rsync`: git over rsync + `ssh://`, etc). - `http`: git over http, both "smart http" and "dumb http". Note that this does _not_ include `https`; if you want both, diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index e3b1de8033..6d20400e75 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -115,6 +115,7 @@ text file is normalized, its line endings are converted to LF in the repository. To control what line ending style is used in the working directory, use the `eol` attribute for a single file and the `core.eol` configuration variable for all text files. +Note that `core.autocrlf` overrides `core.eol` Set:: @@ -130,8 +131,9 @@ Unset:: Set to string value "auto":: When `text` is set to "auto", the path is marked for automatic - end-of-line normalization. If Git decides that the content is - text, its line endings are normalized to LF on checkin. + end-of-line conversion. If Git decides that the content is + text, its line endings are converted to LF on checkin. + When the file has been commited with CRLF, no conversion is done. Unspecified:: @@ -146,7 +148,7 @@ unspecified. ^^^^^ This attribute sets a specific line-ending style to be used in the -working directory. It enables end-of-line normalization without any +working directory. It enables end-of-line conversion without any content checks, effectively setting the `text` attribute. Set to string value "crlf":: @@ -186,9 +188,10 @@ the working directory, and prevent .jpg files from being normalized regardless of their content. ------------------------ +* text=auto *.txt text -*.vcproj eol=crlf -*.sh eol=lf +*.vcproj text eol=crlf +*.sh text eol=lf *.jpg -text ------------------------ @@ -198,7 +201,7 @@ normalization in Git. If you simply want to have CRLF line endings in your working directory regardless of the repository you are working with, you can set the -config variable "core.autocrlf" without changing any attributes. +config variable "core.autocrlf" without using any attributes. ------------------------ [core] @@ -374,6 +377,11 @@ substitution. For example: smudge = git-p4-filter --smudge %f ------------------------ +Note that "%f" is the name of the path that is being worked on. Depending +on the version that is being filtered, the corresponding file on disk may +not exist, or may have different contents. So, smudge and clean commands +should not try to access the file on disk, but only act as filters on the +content provided to them on standard input. Interaction between checkin/checkout attributes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 36e9ab3e16..4546fa0d75 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -710,7 +710,7 @@ files). Again, this can all be simplified with ---------------- -$ git clone rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git +$ git clone git://git.kernel.org/pub/scm/git/git.git/ my-git $ cd my-git $ git checkout ---------------- @@ -949,7 +949,7 @@ for details. [NOTE] If there were more commits on the 'master' branch after the merge, the merge commit itself would not be shown by 'git show-branch' by -default. You would need to provide '--sparse' option to make the +default. You would need to provide `--sparse` option to make the merge commit visible in this case. Now, let's pretend you are the one who did all the work in @@ -1011,20 +1011,6 @@ $ git fetch <remote-repository> One of the following transports can be used to name the repository to download from: -Rsync:: - `rsync://remote.machine/path/to/repo.git/` -+ -Rsync transport is usable for both uploading and downloading, -but is completely unaware of what git does, and can produce -unexpected results when you download from the public repository -while the repository owner is uploading into it via `rsync` -transport. Most notably, it could update the files under -`refs/` which holds the object name of the topmost commits -before uploading the files in `objects/` -- the downloader would -obtain head commit object name while that object itself is still -not available in the repository. For this reason, it is -considered deprecated. - SSH:: `remote.machine:/path/to/repo.git/` or + @@ -1430,7 +1416,7 @@ while, depending on how active your project is. When a repository is synchronized via `git push` and `git pull` objects packed in the source repository are usually stored -unpacked in the destination, unless rsync transport is used. +unpacked in the destination. While this allows you to use different packing strategies on both ends, it also means you may need to repack both repositories every once in a while. diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index 1c75be0803..f3a75d1ce1 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -106,6 +106,11 @@ variable, each helper will be tried in turn, and may provide a username, password, or nothing. Once Git has acquired both a username and a password, no more helpers will be tried. +If `credential.helper` is configured to the empty string, this resets +the helper list to empty (so you may override a helper set by a +lower-priority config file by configuring the empty-string helper, +followed by whatever set of helpers you would like). + CREDENTIAL CONTEXTS ------------------- diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index c579593e55..08cf62278e 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -28,8 +28,8 @@ The 'git diff-{asterisk}' family works by first comparing two sets of files: - 'git diff-index' compares contents of a "tree" object and the - working directory (when '--cached' flag is not used) or a - "tree" object and the index file (when '--cached' flag is + working directory (when `--cached` flag is not used) or a + "tree" object and the index file (when `--cached` flag is used); - 'git diff-files' compares contents of the index file and the diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 7ba0ac965d..d82e912e55 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -7,24 +7,35 @@ githooks - Hooks used by Git SYNOPSIS -------- -$GIT_DIR/hooks/* +$GIT_DIR/hooks/* (or \`git config core.hooksPath`/*) DESCRIPTION ----------- -Hooks are little scripts you can place in `$GIT_DIR/hooks` -directory to trigger action at certain points. When -'git init' is run, a handful of example hooks are copied into the -`hooks` directory of the new repository, but by default they are -all disabled. To enable a hook, rename it by removing its `.sample` -suffix. +Hooks are programs you can place in a hooks directory to trigger +actions at certain points in git's execution. Hooks that don't have +the executable bit set are ignored. -NOTE: It is also a requirement for a given hook to be executable. -However - in a freshly initialized repository - the `.sample` files are -executable by default. +By default the hooks directory is `$GIT_DIR/hooks`, but that can be +changed via the `core.hooksPath` configuration variable (see +linkgit:git-config[1]). -This document describes the currently defined hooks. +Before Git invokes a hook, it changes its working directory to either +the root of the working tree in a non-bare repository, or to the +$GIT_DIR in a bare repository. + +Hooks can get their arguments via the environment, command-line +arguments, and stdin. See the documentation for each hook below for +details. + +'git init' may copy hooks to the new repository, depending on its +configuration. See the "TEMPLATE DIRECTORY" section in +linkgit:git-init[1] for details. When the rest of this document refers +to "default hooks" it's talking about the default template shipped +with Git. + +The currently supported hooks are described below. HOOKS ----- @@ -32,15 +43,15 @@ HOOKS applypatch-msg ~~~~~~~~~~~~~~ -This hook is invoked by 'git am' script. It takes a single +This hook is invoked by 'git am'. It takes a single parameter, the name of the file that holds the proposed commit -log message. Exiting with non-zero status causes -'git am' to abort before applying the patch. +log message. Exiting with a non-zero status causes 'git am' to abort +before applying the patch. The hook is allowed to edit the message file in place, and can be used to normalize the message into some project standard -format (if the project has one). It can also be used to refuse -the commit after inspecting the message file. +format. It can also be used to refuse the commit after inspecting +the message file. The default 'applypatch-msg' hook, when enabled, runs the 'commit-msg' hook, if the latter is enabled. @@ -73,10 +84,10 @@ pre-commit ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `--no-verify` option. It takes no parameter, and is +with the `--no-verify` option. It takes no parameters, and is invoked before obtaining the proposed commit log message and -making a commit. Exiting with non-zero status from this script -causes the 'git commit' to abort. +making a commit. Exiting with a non-zero status from this script +causes the 'git commit' command to abort before creating a commit. The default 'pre-commit' hook, when enabled, catches introduction of lines with trailing whitespaces and aborts the commit when @@ -115,15 +126,15 @@ commit-msg ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `--no-verify` option. It takes a single parameter, the +with the `--no-verify` option. It takes a single parameter, the name of the file that holds the proposed commit log message. -Exiting with non-zero status causes the 'git commit' to +Exiting with a non-zero status causes the 'git commit' to abort. -The hook is allowed to edit the message file in place, and can -be used to normalize the message into some project standard -format (if the project has one). It can also be used to refuse -the commit after inspecting the message file. +The hook is allowed to edit the message file in place, and can be used +to normalize the message into some project standard format. It +can also be used to refuse the commit after inspecting the message +file. The default 'commit-msg' hook, when enabled, detects duplicate "Signed-off-by" lines, and aborts the commit if one is found. @@ -131,8 +142,8 @@ The default 'commit-msg' hook, when enabled, detects duplicate post-commit ~~~~~~~~~~~ -This hook is invoked by 'git commit'. It takes no -parameter, and is invoked after a commit is made. +This hook is invoked by 'git commit'. It takes no parameters, and is +invoked after a commit is made. This hook is meant primarily for notification, and cannot affect the outcome of 'git commit'. @@ -267,9 +278,11 @@ does not know the entire set of branches, so it would end up firing one e-mail per ref when used naively, though. The <<post-receive,'post-receive'>> hook is more suited to that. -Another use suggested on the mailing list is to use this hook to -implement access control which is finer grained than the one -based on filesystem group. +In an environment that restricts the users' access only to git +commands over the wire, this hook can be used to implement access +control without relying on filesystem ownership and group +membership. See linkgit:git-shell[1] for how you might use the login +shell to restrict the user's access to only git commands. Both standard output and standard error output are forwarded to 'git send-pack' on the other end, so you can simply `echo` messages @@ -397,7 +410,7 @@ preceding SP is also omitted. Currently, no commands pass any 'extra-info'. The hook always runs after the automatic note copying (see -"notes.rewrite.<command>" in linkgit:git-config.txt[1]) has happened, and +"notes.rewrite.<command>" in linkgit:git-config[1]) has happened, and thus has access to these notes. The following command-specific comments apply: diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 473623d631..63260f0056 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -38,7 +38,7 @@ precedence, the last matching pattern decides the outcome): * Patterns read from `$GIT_DIR/info/exclude`. * Patterns read from the file specified by the configuration - variable 'core.excludesFile'. + variable `core.excludesFile`. Which file to place a pattern in depends on how the pattern is meant to be used. diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 6ade002176..a68d860fa3 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -82,7 +82,7 @@ linkgit:git-rev-list[1] for a complete list. --simplify-merges:: - Additional option to '--full-history' to remove some needless + Additional option to `--full-history` to remove some needless merges from the resulting history, as there are no selected commits contributing to this merge. (See "History simplification" in linkgit:git-log[1] for a more detailed diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index ac70eca321..07cdd73ab2 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -19,7 +19,7 @@ of linkgit:git-config[1]. The file contains one subsection per submodule, and the subsection value is the name of the submodule. The name is set to the path where the -submodule has been added unless it was customized with the '--name' +submodule has been added unless it was customized with the `--name` option of 'git submodule add'. Each submodule section also contains the following required keys: diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 78e0b27c18..a4de50ad22 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -43,7 +43,7 @@ arguments. The first argument specifies a remote repository as in Git; it is either the name of a configured remote or a URL. The second argument specifies a URL; it is usually of the form '<transport>://<address>', but any arbitrary string is possible. -The 'GIT_DIR' environment variable is set up for the remote helper +The `GIT_DIR` environment variable is set up for the remote helper and can be used to determine where to store additional data or from which directory to invoke auxiliary Git commands. @@ -61,10 +61,10 @@ argument. If such a URL is encountered directly on the command line, the first argument is '<address>', and if it is encountered in a configured remote, the first argument is the name of that remote. -Additionally, when a configured remote has 'remote.<name>.vcs' set to +Additionally, when a configured remote has `remote.<name>.vcs` set to '<transport>', Git explicitly invokes 'git remote-<transport>' with '<name>' as the first argument. If set, the second argument is -'remote.<name>.url'; otherwise, the second argument is omitted. +`remote.<name>.url`; otherwise, the second argument is omitted. INPUT FORMAT ------------ @@ -210,17 +210,17 @@ the remote repository. 'export-marks' <file>:: This modifies the 'export' capability, instructing Git to dump the internal marks table to <file> when complete. For details, - read up on '--export-marks=<file>' in linkgit:git-fast-export[1]. + read up on `--export-marks=<file>` in linkgit:git-fast-export[1]. 'import-marks' <file>:: This modifies the 'export' capability, instructing Git to load the marks specified in <file> before processing any input. For details, - read up on '--import-marks=<file>' in linkgit:git-fast-export[1]. + read up on `--import-marks=<file>` in linkgit:git-fast-export[1]. 'signed-tags':: This modifies the 'export' capability, instructing Git to pass - '--signed-tags=verbatim' to linkgit:git-fast-export[1]. In the - absence of this capability, Git will use '--signed-tags=warn-strip'. + `--signed-tags=verbatim` to linkgit:git-fast-export[1]. In the + absence of this capability, Git will use `--signed-tags=warn-strip`. @@ -298,7 +298,7 @@ Supported if the helper has the "fetch" capability. is followed by a blank line). For example, the following would be two batches of 'push', the first asking the remote-helper to push the local ref 'master' to the remote ref 'master' and - the local 'HEAD' to the remote 'branch', and the second + the local `HEAD` to the remote 'branch', and the second asking to push ref 'foo' to ref 'bar' (forced update requested by the '+'). + diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index b00c67df46..b3b58d324e 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -451,7 +451,7 @@ perform clones and pulls using the ssh protocol: bob$ git clone alice.org:/home/alice/project myrepo ------------------------------------- -Alternatively, Git has a native protocol, or can use rsync or http; +Alternatively, Git has a native protocol, or can use http; see linkgit:git-pull[1] for details. Git can also be used in a CVS-like mode, with a central repository diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 8a42270074..a79e350246 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -376,7 +376,7 @@ $site_name:: Name of your site or organization, to appear in page titles. Set it to something descriptive for clearer bookmarks etc. If this variable is not set or is, then gitweb uses the value of the `SERVER_NAME` - CGI environment variable, setting site name to "$SERVER_NAME Git", + `CGI` environment variable, setting site name to "$SERVER_NAME Git", or "Untitled Git" if this variable is not set (e.g. if running gitweb as standalone script). + diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt index cd9c8951b2..96156e5e1f 100644 --- a/Documentation/gitweb.txt +++ b/Documentation/gitweb.txt @@ -206,8 +206,8 @@ $export_auth_hook = sub { Per-repository gitweb configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can configure individual repositories shown in gitweb by creating file -in the 'GIT_DIR' of Git repository, or by setting some repo configuration -variable (in 'GIT_DIR/config', see linkgit:git-config[1]). +in the `GIT_DIR` of Git repository, or by setting some repo configuration +variable (in `GIT_DIR/config`, see linkgit:git-config[1]). You can use the following files in repository: diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index cafc284359..8ad29e61a9 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -145,7 +145,7 @@ current branch integrates with) obviously do not work, as there is no A fast-forward is a special type of <<def_merge,merge>> where you have a <<def_revision,revision>> and you are "merging" another <<def_branch,branch>>'s changes that happen to be a descendant of what - you have. In such these cases, you do not make a new <<def_merge,merge>> + you have. In such a case, you do not make a new <<def_merge,merge>> <<def_commit,commit>> but instead just update to his revision. This will happen frequently on a <<def_remote_tracking_branch,remote-tracking branch>> of a remote diff --git a/Documentation/howto/new-command.txt b/Documentation/howto/new-command.txt index 6d772bd927..15a4c8031f 100644 --- a/Documentation/howto/new-command.txt +++ b/Documentation/howto/new-command.txt @@ -94,7 +94,7 @@ your language, document it in the INSTALL file. 6. There is a file command-list.txt in the distribution main directory that categorizes commands by type, so they can be listed in appropriate subsections in the documentation's summary command list. Add an entry -for yours. To understand the categories, look at git-commands.txt +for yours. To understand the categories, look at command-list.txt in the main directory. If the new command is part of the typical Git workflow and you believe it common enough to be mentioned in 'git help', map this command to a common group in the column [common]. diff --git a/Documentation/lint-gitlink.perl b/Documentation/lint-gitlink.perl new file mode 100755 index 0000000000..476cc30b83 --- /dev/null +++ b/Documentation/lint-gitlink.perl @@ -0,0 +1,71 @@ +#!/usr/bin/perl + +use File::Find; +use Getopt::Long; + +my $basedir = "."; +GetOptions("basedir=s" => \$basedir) + or die("Cannot parse command line arguments\n"); + +my $found_errors = 0; + +sub report { + my ($where, $what, $error) = @_; + print "$where: $error: $what\n"; + $found_errors = 1; +} + +sub grab_section { + my ($page) = @_; + open my $fh, "<", "$basedir/$page.txt"; + my $firstline = <$fh>; + chomp $firstline; + close $fh; + my ($section) = ($firstline =~ /.*\((\d)\)$/); + return $section; +} + +sub lint { + my ($file) = @_; + open my $fh, "<", $file + or return; + while (<$fh>) { + my $where = "$file:$."; + while (s/linkgit:((.*?)\[(\d)\])//) { + my ($target, $page, $section) = ($1, $2, $3); + + # De-AsciiDoc + $page =~ s/{litdd}/--/g; + + if ($page !~ /^git/) { + report($where, $target, "nongit link"); + next; + } + if (! -f "$basedir/$page.txt") { + report($where, $target, "no such source"); + next; + } + $real_section = grab_section($page); + if ($real_section != $section) { + report($where, $target, + "wrong section (should be $real_section)"); + next; + } + } + } + close $fh; +} + +sub lint_it { + lint($File::Find::name) if -f && /\.txt$/; +} + +if (!@ARGV) { + find({ wanted => \&lint_it, no_chdir => 1 }, $basedir); +} else { + for (@ARGV) { + lint($_); + } +} + +exit $found_errors; diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index 002ca58c21..df3ea3779b 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -61,7 +61,7 @@ merge.verbosity:: message if conflicts were detected. Level 1 outputs only conflicts, 2 outputs conflicts and file changes. Level 5 and above outputs debugging information. The default is level 2. - Can be overridden by the 'GIT_MERGE_VERBOSITY' environment variable. + Can be overridden by the `GIT_MERGE_VERBOSITY` environment variable. merge.<driver>.name:: Defines a human-readable name for a custom low-level diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index f08e9b80c5..5b4a62e936 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -89,8 +89,11 @@ option can be used to override --squash. --verify-signatures:: --no-verify-signatures:: - Verify that the commits being merged have good and trusted GPG signatures - and abort the merge in case they do not. + Verify that the tip commit of the side branch being merged is + signed with a valid key, i.e. a key that has a valid uid: in the + default trust model, this means the signing key has been signed by + a trusted key. If the tip commit of the side branch is not signed + with a valid key, the merge is aborted. --summary:: --no-summary:: @@ -114,3 +117,11 @@ ifndef::git-pull[] reporting. endif::git-pull[] + +--allow-unrelated-histories:: + By default, `git merge` command refuses to merge histories + that do not share a common ancestor. This option can be + used to override this safety when merging histories of two + projects that started their lives independently. As that is + a very rare occasion, no configuration variable to enable + this by default exists and will not be added. diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 7bbd19b300..2eb92b9327 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -81,9 +81,17 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. +no-renames;; + Turn off rename detection. + See also linkgit:git-diff[1] `--no-renames`. + +find-renames[=<n>];; + Turn on rename detection, optionally setting the similarity + threshold. This is the default. + See also linkgit:git-diff[1] `--find-renames`. + rename-threshold=<n>;; - Controls the similarity threshold used for rename detection. - See also linkgit:git-diff[1] `-M`. + Deprecated synonym for `find-renames=<n>`. subtree[=<path>];; This option is a more advanced form of 'subtree' strategy, where diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 671cebd95c..b95d67ec01 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -143,12 +143,18 @@ ifndef::git-rev-list[] - '%N': commit notes endif::git-rev-list[] - '%GG': raw verification message from GPG for a signed commit -- '%G?': show "G" for a Good signature, "B" for a Bad signature, "U" for a good, - untrusted signature and "N" for no signature +- '%G?': show "G" for a good (valid) signature, "B" for a bad signature, + "U" for a good signature with unknown validity and "N" for no signature - '%GS': show the name of the signer for a signed commit - '%GK': show the key used to sign a signed commit -- '%gD': reflog selector, e.g., `refs/stash@{1}` -- '%gd': shortened reflog selector, e.g., `stash@{1}` +- '%gD': reflog selector, e.g., `refs/stash@{1}` or + `refs/stash@{2 minutes ago`}; the format follows the rules described + for the `-g` option. The portion before the `@` is the refname as + given on the command line (so `git log -g refs/heads/master` would + yield `refs/heads/master@{0}`). +- '%gd': shortened reflog selector; same as `%gD`, but the refname + portion is shortened for human readability (so `refs/heads/master` + becomes just `master`). - '%gn': reflog identity name - '%gN': reflog identity name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 4b659ac1a6..e44fc8f738 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -26,7 +26,7 @@ people using 80-column terminals. --no-abbrev-commit:: Show the full 40-byte hexadecimal commit object name. This negates `--abbrev-commit` and those options which imply it such as - "--oneline". It also overrides the 'log.abbrevCommit' variable. + "--oneline". It also overrides the `log.abbrevCommit` variable. --oneline:: This is a shorthand for "--pretty=oneline --abbrev-commit" @@ -42,8 +42,22 @@ people using 80-column terminals. verbatim; this means that invalid sequences in the original commit may be copied to the output. +--expand-tabs=<n>:: +--expand-tabs:: +--no-expand-tabs:: + Perform a tab expansion (replace each tab with enough spaces + to fill to the next display column that is multiple of '<n>') + in the log message before showing it in the output. + `--expand-tabs` is a short-hand for `--expand-tabs=8`, and + `--no-expand-tabs` is a short-hand for `--expand-tabs=0`, + which disables tab expansion. ++ +By default, tabs are expanded in pretty formats that indent the log +message by 4 spaces (i.e. 'medium', which is the default, 'full', +and 'fuller'). + ifndef::git-rev-list[] ---notes[=<ref>]:: +--notes[=<treeish>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when @@ -51,11 +65,11 @@ ifndef::git-rev-list[] on the command line. + By default, the notes shown are from the notes refs listed in the -'core.notesRef' and 'notes.displayRef' variables (or corresponding +`core.notesRef` and `notes.displayRef` variables (or corresponding environment overrides). See linkgit:git-config[1] for more details. + -With an optional '<ref>' argument, show this notes ref instead of the -default notes ref(s). The ref specifies the full refname when it begins +With an optional '<treeish>' argument, use the treeish to find the notes +to display. The treeish can specify the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. + @@ -71,7 +85,7 @@ being displayed. Examples: "--notes=foo" will show only notes from "--notes --notes=foo --no-notes --notes=bar" will only show notes from "refs/notes/bar". ---show-notes[=<ref>]:: +--show-notes[=<treeish>]:: --[no-]standard-notes:: These options are deprecated. Use the above --notes/--no-notes options instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 4f009d4424..eac982cd66 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -193,7 +193,7 @@ endif::git-rev-list[] --stdin:: In addition to the '<commit>' listed on the command - line, read them from the standard input. If a '--' separator is + line, read them from the standard input. If a `--` separator is seen, stop reading commits and start reading paths to limit the result. @@ -252,10 +252,25 @@ list. + With `--pretty` format other than `oneline` (for obvious reasons), this causes the output to have two extra lines of information -taken from the reflog. By default, 'commit@\{Nth}' notation is -used in the output. When the starting commit is specified as -'commit@\{now}', output also uses 'commit@\{timestamp}' notation -instead. Under `--pretty=oneline`, the commit message is +taken from the reflog. The reflog designator in the output may be shown +as `ref@{Nth}` (where `Nth` is the reverse-chronological index in the +reflog) or as `ref@{timestamp}` (with the timestamp for that entry), +depending on a few rules: ++ +-- +1. If the starting point is specified as `ref@{Nth}`, show the index +format. ++ +2. If the starting point was specified as `ref@{now}`, show the +timestamp format. ++ +3. If neither was used, but `--date` was given on the command line, show +the timestamp in the format requested by `--date`. ++ +4. Otherwise, show the index format. +-- ++ +Under `--pretty=oneline`, the commit message is prefixed with this information on the same line. This option cannot be combined with `--reverse`. See also linkgit:git-reflog[1]. @@ -710,8 +725,8 @@ include::pretty-options.txt[] `iso-local`), the user's local time zone is used instead. + `--date=relative` shows dates relative to the current time, -e.g. ``2 hours ago''. The `-local` option cannot be used with -`--raw` or `--relative`. +e.g. ``2 hours ago''. The `-local` option has no effect for +`--date=relative`. + `--date=local` is an alias for `--date=default-local`. + @@ -731,7 +746,18 @@ format, often found in email messages. + `--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. + -`--date=raw` shows the date in the internal raw Git format `%s %z` format. +`--date=raw` shows the date as seconds since the epoch (1970-01-01 +00:00:00 UTC), followed by a space, and then the timezone as an offset +from UTC (a `+` or `-` with four digits; the first two are hours, and +the second two are minutes). I.e., as if the timestamp were formatted +with `strftime("%s %z")`). +Note that the `-local` option does not affect the seconds-since-epoch +value (which is always measured in UTC), but does switch the accompanying +timezone value. ++ +`--date=unix` shows the date as a Unix epoch timestamp (seconds since +1970). As with `--raw`, this is always in UTC and therefore `-local` +has no effect. + `--date=format:...` feeds the format `...` to your system `strftime`. Use `--date=format:%c` to show the date in your system locale's diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index d85e303364..abae363983 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -28,8 +28,8 @@ blobs contained in a commit. first match in the following rules: . If '$GIT_DIR/<refname>' exists, that is what you mean (this is usually - useful only for 'HEAD', 'FETCH_HEAD', 'ORIG_HEAD', 'MERGE_HEAD' - and 'CHERRY_PICK_HEAD'); + useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD`, `MERGE_HEAD` + and `CHERRY_PICK_HEAD`); . otherwise, 'refs/<refname>' if it exists; @@ -41,16 +41,16 @@ blobs contained in a commit. . otherwise, 'refs/remotes/<refname>/HEAD' if it exists. + -'HEAD' names the commit on which you based the changes in the working tree. -'FETCH_HEAD' records the branch which you fetched from a remote repository +`HEAD` names the commit on which you based the changes in the working tree. +`FETCH_HEAD` records the branch which you fetched from a remote repository with your last `git fetch` invocation. -'ORIG_HEAD' is created by commands that move your 'HEAD' in a drastic -way, to record the position of the 'HEAD' before their operation, so that +`ORIG_HEAD` is created by commands that move your `HEAD` in a drastic +way, to record the position of the `HEAD` before their operation, so that you can easily change the tip of the branch back to the state before you ran them. -'MERGE_HEAD' records the commit(s) which you are merging into your branch +`MERGE_HEAD` records the commit(s) which you are merging into your branch when you run `git merge`. -'CHERRY_PICK_HEAD' records the commit which you are cherry-picking +`CHERRY_PICK_HEAD` records the commit which you are cherry-picking when you run `git cherry-pick`. + Note that any of the 'refs/*' cases above may come either from @@ -59,21 +59,21 @@ While the ref name encoding is unspecified, UTF-8 is preferred as some output processing may assume ref names in UTF-8. '@':: - '@' alone is a shortcut for 'HEAD'. + '@' alone is a shortcut for `HEAD`. -'<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: +'<refname>@{<date>}', e.g. 'master@\{yesterday\}', 'HEAD@{5 minutes ago}':: A ref followed by the suffix '@' with a date specification enclosed in a brace - pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') specifies the value + pair (e.g. '\{yesterday\}', '{1 month 2 weeks 3 days 1 hour 1 + second ago}' or '{1979-02-26 18:30:00}') specifies the value of the ref at a prior point in time. This suffix may only be used immediately following a ref name and the ref must have an existing log ('$GIT_DIR/logs/<ref>'). Note that this looks up the state of your *local* ref at a given time; e.g., what was in your local 'master' branch last week. If you want to look at commits made during - certain times, see '--since' and '--until'. + certain times, see `--since` and `--until`. -'<refname>@\{<n>\}', e.g. 'master@\{1\}':: +'<refname>@{<n>}', e.g. 'master@\{1\}':: A ref followed by the suffix '@' with an ordinal specification enclosed in a brace pair (e.g. '\{1\}', '\{15\}') specifies the n-th prior value of that ref. For example 'master@\{1\}' @@ -82,13 +82,13 @@ some output processing may assume ref names in UTF-8. immediately following a ref name and the ref must have an existing log ('$GIT_DIR/logs/<refname>'). -'@\{<n>\}', e.g. '@\{1\}':: +'@{<n>}', e.g. '@\{1\}':: You can use the '@' construct with an empty ref part to get at a reflog entry of the current branch. For example, if you are on branch 'blabla' then '@\{1\}' means the same as 'blabla@\{1\}'. -'@\{-<n>\}', e.g. '@\{-1\}':: - The construct '@\{-<n>\}' means the <n>th branch/commit checked out +'@{-<n>}', e.g. '@{-1}':: + The construct '@{-<n>}' means the <n>th branch/commit checked out before the current one. '<branchname>@\{upstream\}', e.g. 'master@\{upstream\}', '@\{u\}':: @@ -101,7 +101,7 @@ some output processing may assume ref names in UTF-8. '<branchname>@\{push\}', e.g. 'master@\{push\}', '@\{push\}':: The suffix '@\{push}' reports the branch "where we would push to" if `git push` were run while `branchname` was checked out (or the current - 'HEAD' if no branchname is specified). Since our push destination is + `HEAD` if no branchname is specified). Since our push destination is in a remote repository, of course, we report the local tracking branch that corresponds to that branch (i.e., something in 'refs/remotes/'). + @@ -139,7 +139,7 @@ from one location and push to another. In a non-triangular workflow, '<rev>{caret}1{caret}1{caret}1'. See below for an illustration of the usage of this form. -'<rev>{caret}\{<type>\}', e.g. 'v0.99.8{caret}\{commit\}':: +'<rev>{caret}{<type>}', e.g. 'v0.99.8{caret}\{commit\}':: A suffix '{caret}' followed by an object type name enclosed in brace pair means dereference the object at '<rev>' recursively until an object of type '<type>' is found or the object cannot be @@ -159,13 +159,13 @@ it does not have to be dereferenced even once to get to an object. 'rev{caret}\{tag\}' can be used to ensure that 'rev' identifies an existing tag object. -'<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: +'<rev>{caret}{}', e.g. 'v0.99.8{caret}{}':: A suffix '{caret}' followed by an empty brace pair means the object could be a tag, and dereference the tag recursively until a non-tag object is found. -'<rev>{caret}\{/<text>\}', e.g. 'HEAD^{/fix nasty bug}':: +'<rev>{caret}{/<text>}', e.g. 'HEAD^{/fix nasty bug}':: A suffix '{caret}' to a revision parameter, followed by a brace pair that contains a text led by a slash, is the same as the ':/fix nasty bug' syntax below except that @@ -176,11 +176,12 @@ existing tag object. A colon, followed by a slash, followed by a text, names a commit whose commit message matches the specified regular expression. This name returns the youngest matching commit which is - reachable from any ref. If the commit message starts with a - '!' you have to repeat that; the special sequence ':/!', - followed by something else than '!', is reserved for now. - The regular expression can match any part of the commit message. To - match messages starting with a string, one can use e.g. ':/^foo'. + reachable from any ref. The regular expression can match any part of the + commit message. To match messages starting with a string, one can use + e.g. ':/^foo'. The special sequence ':/!' is reserved for modifiers to what + is matched. ':/!-foo' performs a negative match, while ':/!!foo' matches a + literal '!' character, followed by 'foo'. Any other sequence beginning with + ':/!' is reserved for now. '<rev>:<path>', e.g. 'HEAD:README', ':README', 'master:./README':: A suffix ':' followed by a path names the blob or tree @@ -282,12 +283,12 @@ To summarize: '<rev1>..<rev2>':: Include commits that are reachable from <rev2> but exclude those that are reachable from <rev1>. When either <rev1> or - <rev2> is omitted, it defaults to 'HEAD'. + <rev2> is omitted, it defaults to `HEAD`. '<rev1>\...<rev2>':: Include commits that are reachable from either <rev1> or <rev2> but exclude those that are reachable from both. When - either <rev1> or <rev2> is omitted, it defaults to 'HEAD'. + either <rev1> or <rev2> is omitted, it defaults to `HEAD`. '<rev>{caret}@', e.g. 'HEAD{caret}@':: A suffix '{caret}' followed by an at sign is the same as listing diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt index 0d8b99b368..20741f345e 100644 --- a/Documentation/technical/api-config.txt +++ b/Documentation/technical/api-config.txt @@ -63,13 +63,6 @@ parse for configuration, rather than looking in the usual files. Regular Specify whether include directives should be followed in parsed files. Regular `git_config` defaults to `1`. -There is a special version of `git_config` called `git_config_early`. -This version takes an additional parameter to specify the repository -config, instead of having it looked up via `git_path`. This is useful -early in a Git program before the repository has been found. Unless -you're working with early setup code, you probably don't want to use -this. - Reading Specific Files ---------------------- diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt index e44426dd04..75368f26ca 100644 --- a/Documentation/technical/api-credentials.txt +++ b/Documentation/technical/api-credentials.txt @@ -243,7 +243,7 @@ appended to its command line, which is one of: The details of the credential will be provided on the helper's stdin stream. The exact format is the same as the input/output format of the `git credential` plumbing command (see the section `INPUT/OUTPUT -FORMAT` in linkgit:git-credential[7] for a detailed specification). +FORMAT` in linkgit:git-credential[1] for a detailed specification). For a `get` operation, the helper should produce a list of attributes on stdout in the same format. A helper is free to produce a subset, or @@ -268,4 +268,4 @@ See also linkgit:gitcredentials[7] -linkgit:git-config[5] (See configuration variables `credential.*`) +linkgit:git-config[1] (See configuration variables `credential.*`) diff --git a/Documentation/technical/api-hashmap.txt b/Documentation/technical/api-hashmap.txt index ad7a5bddd2..28f5a8b715 100644 --- a/Documentation/technical/api-hashmap.txt +++ b/Documentation/technical/api-hashmap.txt @@ -104,6 +104,11 @@ If `free_entries` is true, each hashmap_entry in the map is freed as well `entry` points to the entry to initialize. + `hash` is the hash code of the entry. ++ +The hashmap_entry structure does not hold references to external resources, +and it is safe to just discard it once you are done with it (i.e. if +your structure was allocated with xmalloc(), you can just free(3) it, +and if it is on stack, you can just let it go out of scope). `void *hashmap_get(const struct hashmap *map, const void *key, const void *keydata)`:: diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 5f0757dcc9..27bd701c0d 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -144,8 +144,12 @@ There are some macros to easily define options: `OPT_COUNTUP(short, long, &int_var, description)`:: Introduce a count-up option. - `int_var` is incremented on each use of `--option`, and - reset to zero with `--no-option`. + Each use of `--option` increments `int_var`, starting from zero + (even if initially negative), and `--no-option` resets it to + zero. To determine if `--option` or `--no-option` was encountered at + all, initialize `int_var` to a negative value, and if it is still + negative after parse_options(), then neither `--option` nor + `--no-option` was seen. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. @@ -231,6 +235,13 @@ There are some macros to easily define options: pass the command-line option, which can be specified multiple times, to another command. +`OPT_CMDMODE(short, long, &int_var, description, enum_val)`:: + Define an "operation mode" option, only one of which in the same + group of "operating mode" options that share the same `int_var` + can be given by the user. `enum_val` is set to `int_var` when the + option is used, but an error is reported if other "operating mode" + option has already set its value to the same `int_var`. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-remote.txt b/Documentation/technical/api-remote.txt index 2cfdd224a8..f10941b2e8 100644 --- a/Documentation/technical/api-remote.txt +++ b/Documentation/technical/api-remote.txt @@ -51,6 +51,10 @@ struct remote The proxy to use for curl (http, https, ftp, etc.) URLs. +`http_proxy_authmethod`:: + + The method used for authenticating against `http_proxy`. + struct remotes can be found by name with remote_get(), and iterated through with for_each_remote(). remote_get(NULL) will return the default remote, given the current branch and configuration. diff --git a/Documentation/technical/api-trace.txt b/Documentation/technical/api-trace.txt index 097a651d96..fadb5979c4 100644 --- a/Documentation/technical/api-trace.txt +++ b/Documentation/technical/api-trace.txt @@ -28,7 +28,7 @@ static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); static void trace_print_foo(const char *message) { - trace_print_key(&trace_foo, message); + trace_printf_key(&trace_foo, "%s", message); } ------------ + @@ -95,3 +95,46 @@ for (;;) { } trace_performance(t, "frotz"); ------------ + +Bugs & Caveats +-------------- + +GIT_TRACE_* environment variables can be used to tell Git to show +trace output to its standard error stream. Git can often spawn a pager +internally to run its subcommand and send its standard output and +standard error to it. + +Because GIT_TRACE_PERFORMANCE trace is generated only at the very end +of the program with atexit(), which happens after the pager exits, it +would not work well if you send its log to the standard error output +and let Git spawn the pager at the same time. + +As a work around, you can for example use '--no-pager', or set +GIT_TRACE_PERFORMANCE to another file descriptor which is redirected +to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its +absolute path. + +For example instead of the following command which by default may not +print any performance information: + +------------ +GIT_TRACE_PERFORMANCE=2 git log -1 +------------ + +you may want to use: + +------------ +GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 +------------ diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index c6977bbc5a..d40ab65496 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -307,7 +307,7 @@ In multi_ack mode: ready to make a packfile, it will blindly ACK all 'have' obj-ids back to the client. - * the server will then send a 'NACK' and then wait for another response + * the server will then send a 'NAK' and then wait for another response from the client - either a 'done' or another list of 'have' lines. In multi_ack_detailed mode: @@ -526,7 +526,7 @@ Push Certificate A push certificate begins with a set of header lines. After the header and an empty line, the protocol commands follow, one per -line. Note that the the trailing LF in push-cert PKT-LINEs is _not_ +line. Note that the trailing LF in push-cert PKT-LINEs is _not_ optional; it must be present. Currently, the following header fields are defined: diff --git a/Documentation/technical/protocol-common.txt b/Documentation/technical/protocol-common.txt index bf30167ae3..ecedb34bba 100644 --- a/Documentation/technical/protocol-common.txt +++ b/Documentation/technical/protocol-common.txt @@ -67,9 +67,9 @@ with non-binary data the same whether or not they contain the trailing LF (stripping the LF if present, and not complaining when it is missing). -The maximum length of a pkt-line's data component is 65520 bytes. -Implementations MUST NOT send pkt-line whose length exceeds 65524 -(65520 bytes of payload + 4 bytes of length data). +The maximum length of a pkt-line's data component is 65516 bytes. +Implementations MUST NOT send pkt-line whose length exceeds 65520 +(65516 bytes of payload + 4 bytes of length data). Implementations SHOULD NOT send an empty pkt-line ("0004"). diff --git a/Documentation/technical/signature-format.txt b/Documentation/technical/signature-format.txt new file mode 100644 index 0000000000..2c9406a56a --- /dev/null +++ b/Documentation/technical/signature-format.txt @@ -0,0 +1,186 @@ +Git signature format +==================== + +== Overview + +Git uses cryptographic signatures in various places, currently objects (tags, +commits, mergetags) and transactions (pushes). In every case, the command which +is about to create an object or transaction determines a payload from that, +calls gpg to obtain a detached signature for the payload (`gpg -bsa`) and +embeds the signature into the object or transaction. + +Signatures always begin with `-----BEGIN PGP SIGNATURE-----` +and end with `-----END PGP SIGNATURE-----`, unless gpg is told to +produce RFC1991 signatures which use `MESSAGE` instead of `SIGNATURE`. + +The signed payload and the way the signature is embedded depends +on the type of the object resp. transaction. + +== Tag signatures + +- created by: `git tag -s` +- payload: annotated tag object +- embedding: append the signature to the unsigned tag object +- example: tag `signedtag` with subject `signed tag` + +---- +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1 + +iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn +rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh +8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods +q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 +rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x +lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= +=jpXa +-----END PGP SIGNATURE----- +---- + +- verify with: `git verify-tag [-v]` or `git tag -v` + +---- +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +---- + +== Commit signatures + +- created by: `git commit -S` +- payload: commit object +- embedding: header entry `gpgsig` + (content is preceded by a space) +- example: commit with subject `signed commit` + +---- +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 +gpgsig -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRjRAAoJEGEJLoW3InGJ3IwIAIY4SA6GxY3BjL60YyvsJPh/ + HRCJwH+w7wt3Yc/9/bW2F+gF72kdHOOs2jfv+OZhq0q4OAN6fvVSczISY/82LpS7 + DVdMQj2/YcHDT4xrDNBnXnviDO9G7am/9OE77kEbXrp7QPxvhjkicHNwy2rEflAA + zn075rtEERDHr8nRYiDh8eVrefSO7D+bdQ7gv+7GsYMsd2auJWi1dHOSfTr9HIF4 + HJhWXT9d2f8W+diRYXGh4X0wYiGg6na/soXc+vdtDYBzIxanRqjg8jCAeo1eOTk1 + EdTwhcTZlI0x5pvJ3H0+4hA2jtldVtmPM4OTB0cTrEWBad7XV6YgiyuII73Ve3I= + =jKHM + -----END PGP SIGNATURE----- + +signed commit + +signed commit message body +---- + +- verify with: `git verify-commit [-v]` (or `git show --show-signature`) + +---- +gpg: Signature made Wed Jun 15 10:58:57 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 + +signed commit + +signed commit message body +---- + +== Mergetag signatures + +- created by: `git merge` on signed tag +- payload/embedding: the whole signed tag object is embedded into + the (merge) commit object as header entry `mergetag` +- example: merge of the signed tag `signedtag` as above + +---- +tree c7b1cff039a93f3600a1d18b82d26688668c7dea +parent c33429be94b5f2d3ee9b0adad223f877f174b05d +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465982009 +0000 +committer C O Mitter <committer@example.com> 1465982009 +0000 +mergetag object 04b871796dc0420f8e7561a895b52484b701d51a + type commit + tag signedtag + tagger C O Mitter <committer@example.com> 1465981006 +0000 + + signed tag + + signed tag message body + -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn + rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh + 8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods + q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 + rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x + lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= + =jpXa + -----END PGP SIGNATURE----- + +Merge tag 'signedtag' into downstream + +signed tag + +signed tag message body + +# gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 +# gpg: Good signature from "Eris Discordia <discord@example.net>" +# gpg: WARNING: This key is not certified with a trusted signature! +# gpg: There is no indication that the signature belongs to the owner. +# Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- + +- verify with: verification is embedded in merge commit message by default, + alternatively with `git show --show-signature`: + +---- +commit 9863f0c76ff78712b6800e199a46aa56afbcbd49 +merged tag 'signedtag' +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +Merge: c33429b 04b8717 +Author: A U Thor <author@example.com> +Date: Wed Jun 15 09:13:29 2016 +0000 + + Merge tag 'signedtag' into downstream + + signed tag + + signed tag message body + + # gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 + # gpg: Good signature from "Eris Discordia <discord@example.net>" + # gpg: WARNING: This key is not certified with a trusted signature! + # gpg: There is no indication that the signature belongs to the owner. + # Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 9ccb24677e..b05da95788 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -7,9 +7,8 @@ Depending on the transport protocol, some of this information may be absent. Git supports ssh, git, http, and https protocols (in addition, ftp, -and ftps can be used for fetching and rsync can be used for fetching -and pushing, but these are inefficient and deprecated; do not use -them). +and ftps can be used for fetching, but this is inefficient and +deprecated; do not use it). The native transport (i.e. git:// URL) does no authentication and should be used with caution on unsecured networks. @@ -20,7 +19,6 @@ The following syntaxes may be used with them: - git://host.xz{startsb}:port{endsb}/path/to/repo.git/ - http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ - ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- rsync://host.xz/path/to/repo.git/ An alternative scp-like syntax may also be used with the ssh protocol: diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index ec6bacfcdf..5e07454572 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2134,7 +2134,7 @@ browsing the repository using gitweb. The default server when using instaweb is lighttpd. See the file gitweb/INSTALL in the Git source tree and -linkgit:gitweb[1] for instructions on details setting up a permament +linkgit:gitweb[1] for instructions on details setting up a permanent installation with a CGI or Perl capable server. [[how-to-get-a-git-repository-with-minimal-history]] |