diff options
Diffstat (limited to 'Documentation')
56 files changed, 1229 insertions, 314 deletions
diff --git a/Documentation/MyFirstContribution.txt b/Documentation/MyFirstContribution.txt index 015cf24631..b20bc8e914 100644 --- a/Documentation/MyFirstContribution.txt +++ b/Documentation/MyFirstContribution.txt @@ -1029,22 +1029,42 @@ kidding - be patient!) [[v2-git-send-email]] === Sending v2 -Skip ahead to <<reviewing,Responding to Reviews>> for information on how to -handle comments from reviewers. Continue this section when your topic branch is -shaped the way you want it to look for your patchset v2. +This section will focus on how to send a v2 of your patchset. To learn what +should go into v2, skip ahead to <<reviewing,Responding to Reviews>> for +information on how to handle comments from reviewers. + +We'll reuse our `psuh` topic branch for v2. Before we make any changes, we'll +mark the tip of our v1 branch for easy reference: -When you're ready with the next iteration of your patch, the process is fairly -similar. +---- +$ git checkout psuh +$ git branch psuh-v1 +---- -First, generate your v2 patches again: +Refine your patch series by using `git rebase -i` to adjust commits based upon +reviewer comments. Once the patch series is ready for submission, generate your +patches again, but with some new flags: ---- -$ git format-patch -v2 --cover-letter -o psuh/ master..psuh +$ git format-patch -v2 --cover-letter -o psuh/ --range-diff master..psuh-v1 master.. ---- -This will add your v2 patches, all named like `v2-000n-my-commit-subject.patch`, -to the `psuh/` directory. You may notice that they are sitting alongside the v1 -patches; that's fine, but be careful when you are ready to send them. +The `--range-diff master..psuh-v1` parameter tells `format-patch` to include a +range-diff between `psuh-v1` and `psuh` in the cover letter (see +linkgit:git-range-diff[1]). This helps tell reviewers about the differences +between your v1 and v2 patches. + +The `-v2` parameter tells `format-patch` to output your patches +as version "2". For instance, you may notice that your v2 patches are +all named like `v2-000n-my-commit-subject.patch`. `-v2` will also format +your patches by prefixing them with "[PATCH v2]" instead of "[PATCH]", +and your range-diff will be prefaced with "Range-diff against v1". + +Afer you run this command, `format-patch` will output the patches to the `psuh/` +directory, alongside the v1 patches. Using a single directory makes it easy to +refer to the old v1 patches while proofreading the v2 patches, but you will need +to be careful to send out only the v2 patches. We will use a pattern like +"psuh/v2-*.patch" (not "psuh/*.patch", which would match v1 and v2 patches). Edit your cover letter again. Now is a good time to mention what's different between your last version and now, if it's something significant. You do not @@ -1082,7 +1102,7 @@ to the command: ---- $ git send-email --to=target@example.com --in-reply-to="<foo.12345.author@example.com>" - psuh/v2* + psuh/v2-*.patch ---- [[single-patch]] diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt index 2d10eea7a9..45eb84d8b4 100644 --- a/Documentation/MyFirstObjectWalk.txt +++ b/Documentation/MyFirstObjectWalk.txt @@ -691,7 +691,7 @@ help understand. In our case, that means we omit trees and blobs not directly referenced by `HEAD` or `HEAD`'s history, because we begin the walk with only `HEAD` in the `pending` list.) -First, we'll need to `#include "list-objects-filter-options.h`" and set up the +First, we'll need to `#include "list-objects-filter-options.h"` and set up the `struct list_objects_filter_options` at the top of the function. ---- @@ -779,7 +779,7 @@ Count all the objects within and modify the print statement: while ((oid = oidset_iter_next(&oit))) omitted_count++; - printf("commits %d\nblobs %d\ntags %d\ntrees%d\nomitted %d\n", + printf("commits %d\nblobs %d\ntags %d\ntrees %d\nomitted %d\n", commit_count, blob_count, tag_count, tree_count, omitted_count); ---- diff --git a/Documentation/RelNotes/2.33.1.txt b/Documentation/RelNotes/2.33.1.txt new file mode 100644 index 0000000000..b71738e654 --- /dev/null +++ b/Documentation/RelNotes/2.33.1.txt @@ -0,0 +1,138 @@ +Git 2.33.1 Release Notes +======================== + +This primarily is to backport various fixes accumulated during the +development towards Git 2.34, the next feature release. + + +Fixes since v2.33 +----------------- + + * The unicode character width table (used for output alignment) has + been updated. + + * Input validation of "git pack-objects --stdin-packs" has been + corrected. + + * Bugfix for common ancestor negotiation recently introduced in "git + push" codepath. + + * "git pull" had various corner cases that were not well thought out + around its --rebase backend, e.g. "git pull --ff-only" did not stop + but went ahead and rebased when the history on other side is not a + descendant of our history. The series tries to fix them up. + + * "git apply" miscounted the bytes and failed to read to the end of + binary hunks. + + * "git range-diff" code clean-up. + + * "git commit --fixup" now works with "--edit" again, after it was + broken in v2.32. + + * Use upload-artifacts v1 (instead of v2) for 32-bit linux, as the + new version has a blocker bug for that architecture. + + * Checking out all the paths from HEAD during the last conflicted + step in "git rebase" and continuing would cause the step to be + skipped (which is expected), but leaves MERGE_MSG file behind in + $GIT_DIR and confuses the next "git commit", which has been + corrected. + + * Various bugs in "git rebase -r" have been fixed. + + * mmap() imitation used to call xmalloc() that dies upon malloc() + failure, which has been corrected to just return an error to the + caller to be handled. + + * "git diff --relative" segfaulted and/or produced incorrect result + when there are unmerged paths. + + * The delayed checkout code path in "git checkout" etc. were chatty + even when --quiet and/or --no-progress options were given. + + * "git branch -D <branch>" used to refuse to remove a broken branch + ref that points at a missing commit, which has been corrected. + + * Build update for Apple clang. + + * The parser for the "--nl" option of "git column" has been + corrected. + + * "git upload-pack" which runs on the other side of "git fetch" + forgot to take the ref namespaces into account when handling + want-ref requests. + + * The sparse-index support can corrupt the index structure by storing + a stale and/or uninitialized data, which has been corrected. + + * Buggy tests could damage repositories outside the throw-away test + area we created. We now by default export GIT_CEILING_DIRECTORIES + to limit the damage from such a stray test. + + * Even when running "git send-email" without its own threaded + discussion support, a threading related header in one message is + carried over to the subsequent message to result in an unwanted + threading, which has been corrected. + + * The output from "git fast-export", when its anonymization feature + is in use, showed an annotated tag incorrectly. + + * Recent "diff -m" changes broke "gitk", which has been corrected. + + * "git maintenance" scheduler fix for macOS. + + * A pathname in an advice message has been made cut-and-paste ready. + + * The "git apply -3" code path learned not to bother the lower level + merge machinery when the three-way merge can be trivially resolved + without the content level merge. + + * The code that optionally creates the *.rev reverse index file has + been optimized to avoid needless computation when it is not writing + the file out. + + * "git range-diff -I... <range> <range>" segfaulted, which has been + corrected. + + * The order in which various files that make up a single (conceptual) + packfile has been reevaluated and straightened up. This matters in + correctness, as an incomplete set of files must not be shown to a + running Git. + + * The "mode" word is useless in a call to open(2) that does not + create a new file. Such a call in the files backend of the ref + subsystem has been cleaned up. + + * "git update-ref --stdin" failed to flush its output as needed, + which potentially led the conversation to a deadlock. + + * When "git am --abort" fails to abort correctly, it still exited + with exit status of 0, which has been corrected. + + * Correct nr and alloc members of strvec struct to be of type size_t. + + * "git stash", where the tentative change involves changing a + directory to a file (or vice versa), was confused, which has been + corrected. + + * "git clone" from a repository whose HEAD is unborn into a bare + repository didn't follow the branch name the other side used, which + is corrected. + + * "git cvsserver" had a long-standing bug in its authentication code, + which has finally been corrected (it is unclear and is a separate + question if anybody is seriously using it, though). + + * "git difftool --dir-diff" mishandled symbolic links. + + * Sensitive data in the HTTP trace were supposed to be redacted, but + we failed to do so in HTTP/2 requests. + + * "make clean" has been updated to remove leftover .depend/ + directories, even when it is not told to use them to compute header + dependencies. + + * Protocol v0 clients can get stuck parsing a malformed feature line. + +Also contains various documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.34.0.txt b/Documentation/RelNotes/2.34.0.txt new file mode 100644 index 0000000000..0bfeaea546 --- /dev/null +++ b/Documentation/RelNotes/2.34.0.txt @@ -0,0 +1,307 @@ +Git 2.34 Release Notes +====================== + +Updates since Git 2.33 +---------------------- + +UI, Workflows & Features + + * Pathname expansion (like "~username/") learned a way to specify a + location relative to Git installation (e.g. its $sharedir which is + $(prefix)/share), with "%(prefix)". + + * Use `ort` instead of `recursive` as the default merge strategy. + + * The userdiff pattern for "java" language has been updated. + + * "git rebase" by default skips changes that are equivalent to + commits that are already in the history the branch is rebased onto; + give messages when this happens to let the users be aware of + skipped commits, and also teach them how to tell "rebase" to keep + duplicated changes. + + * The advice message that "git cherry-pick" gives when it asks + conflicted replay of a commit to be resolved by the end user has + been updated. + + * After "git clone --recurse-submodules", all submodules are cloned + but they are not by default recursed into by other commands. With + submodule.stickyRecursiveClone configuration set, submodule.recurse + configuration is set to true in a repository created by "clone" + with "--recurse-submodules" option. + + * The logic for auto-correction of misspelt subcommands learned to go + interactive when the help.autocorrect configuration variable is set + to 'prompt'. + + * "git maintenance" scheduler learned to use systemd timers as a + possible backend. + + * "git diff --submodule=diff" showed failure from run_command() when + trying to run diff inside a submodule, when the user manually + removes the submodule directory. + + * "git bundle unbundle" learned to show progress display. + + * In cone mode, the sparse-index code path learned to remove ignored + files (like build artifacts) outside the sparse cone, allowing the + entire directory outside the sparse cone to be removed, which is + especially useful when the sparse patterns change. + + * Taking advantage of the CGI interface, http-backend has been + updated to enable protocol v2 automatically when the other side + asks for it. + + * The credential-cache helper has been adjusted to Windows. + + * The error in "git help no-such-git-command" is handled better. + + * The unicode character width table (used for output alignment) has + been updated. + + * The ref iteration code used to optionally allow dangling refs to be + shown, which has been tightened up. + + * "git add", "git mv", and "git rm" have been adjusted to avoid + updating paths outside of the sparse-checkout definition unless + the user specifies a "--sparse" option. + + +Performance, Internal Implementation, Development Support etc. + + * "git bisect" spawned "git show-branch" only to pretty-print the + title of the commit after checking out the next version to be + tested; this has been rewritten in C. + + * "git add" can work better with the sparse index. + + * Support for ancient versions of cURL library (pre 7.19.4) has been + dropped. + + * A handful of tests that assumed implementation details of files + backend for refs have been cleaned up. + + * trace2 logs learned to show parent process name to see in what + context Git was invoked. + + * Loading of ref tips to prepare for common ancestry negotiation in + "git fetch-pack" has been optimized by taking advantage of the + commit graph when available. + + * Remind developers that the userdiff patterns should be kept simple + and permissive, assuming that the contents they apply are always + syntactically correct. + + * The current implementation of GIT_TEST_FAIL_PREREQS is broken in + that checking for the lack of a prerequisite would not work. Avoid + the use of "if ! test_have_prereq X" in a test script. + + * The revision traversal API has been optimized by taking advantage + of the commit-graph, when available, to determine if a commit is + reachable from any of the existing refs. + + * "git fetch --quiet" optimization to avoid useless computation of + info that will never be displayed. + + * Callers from older advice_config[] based API has been updated to + use the newer advice_if_enabled() and advice_enabled() API. + + * Teach "test_pause" and "debug" helpers to allow using the HOME and + TERM environment variables the user usually uses. + + * "make INSTALL_STRIP=-s install" allows the installation step to use + "install -s" to strip the binaries as they get installed. + + * Code that handles large number of refs in the "git fetch" code + path has been optimized. + + * The reachability bitmap file used to be generated only for a single + pack, but now we've learned to generate bitmaps for history that + span across multiple packfiles. + + * The code to make "git grep" recurse into submodules has been + updated to migrate away from the "add submodule's object store as + an alternate object store" mechanism (which is suboptimal). + + * The tracing of process ancestry information has been enhanced. + + * Reduce number of write(2) system calls while sending the + ref advertisement. + + * Update the build procedure to use the "-pedantic" build when + DEVELOPER makefile macro is in effect. + + * Large part of "git submodule add" gets rewritten in C. + + * The run-command API has been updated so that the callers can easily + ask the file descriptors open for packfiles to be closed immediately + before spawning commands that may trigger auto-gc. + + * An oddball OPTION_ARGUMENT feature has been removed from the + parse-options API. + + * The mergesort implementation used to sort linked list has been + optimized. + + * Remove external declaration of functions that no longer exist. + + * "git multi-pack-index write --bitmap" learns to propagate the + hashcache from original bitmap to resulting bitmap. + + * CI learns to run the leak sanitizer builds. + + * "git grep --recurse-submodules" takes trees and blobs from the + submodule repository, but the textconv settings when processing a + blob from the submodule is not taken from the submodule repository. + A test is added to demonstrate the issue, without fixing it. + + * Teach "git help -c" into helping the command line completion of + configuration variables. + + * When "git cmd -h" shows more than one line of usage text (e.g. + the cmd subcommand may take sub-sub-command), parse-options API + learned to align these lines, even across i18n/l10n. + + * Prevent "make sparse" from running for the source files that + haven't been modified. + + +Fixes since v2.33 +----------------- + + * Input validation of "git pack-objects --stdin-packs" has been + corrected. + + * Bugfix for common ancestor negotiation recently introduced in "git + push" code path. + + * "git pull" had various corner cases that were not well thought out + around its --rebase backend, e.g. "git pull --ff-only" did not stop + but went ahead and rebased when the history on other side is not a + descendant of our history. The series tries to fix them up. + + * "git apply" miscounted the bytes and failed to read to the end of + binary hunks. + + * "git range-diff" code clean-up. + + * "git commit --fixup" now works with "--edit" again, after it was + broken in v2.32. + + * Use upload-artifacts v1 (instead of v2) for 32-bit linux, as the + new version has a blocker bug for that architecture. + + * Checking out all the paths from HEAD during the last conflicted + step in "git rebase" and continuing would cause the step to be + skipped (which is expected), but leaves MERGE_MSG file behind in + $GIT_DIR and confuses the next "git commit", which has been + corrected. + + * Various bugs in "git rebase -r" have been fixed. + + * mmap() imitation used to call xmalloc() that dies upon malloc() + failure, which has been corrected to just return an error to the + caller to be handled. + + * "git diff --relative" segfaulted and/or produced incorrect result + when there are unmerged paths. + + * The delayed checkout code path in "git checkout" etc. were chatty + even when --quiet and/or --no-progress options were given. + + * "git branch -D <branch>" used to refuse to remove a broken branch + ref that points at a missing commit, which has been corrected. + + * Build update for Apple clang. + + * The parser for the "--nl" option of "git column" has been + corrected. + + * "git upload-pack" which runs on the other side of "git fetch" + forgot to take the ref namespaces into account when handling + want-ref requests. + + * The sparse-index support can corrupt the index structure by storing + a stale and/or uninitialized data, which has been corrected. + + * Buggy tests could damage repositories outside the throw-away test + area we created. We now by default export GIT_CEILING_DIRECTORIES + to limit the damage from such a stray test. + + * Even when running "git send-email" without its own threaded + discussion support, a threading related header in one message is + carried over to the subsequent message to result in an unwanted + threading, which has been corrected. + + * The output from "git fast-export", when its anonymization feature + is in use, showed an annotated tag incorrectly. + + * Doc update plus improved error reporting. + + * Recent "diff -m" changes broke "gitk", which has been corrected. + + * Regression fix. + + * The "git apply -3" code path learned not to bother the lower level + merge machinery when the three-way merge can be trivially resolved + without the content level merge. This fixes a regression caused by + recent "-3way first and fall back to direct application" change. + + * The code that optionally creates the *.rev reverse index file has + been optimized to avoid needless computation when it is not writing + the file out. + + * "git range-diff -I... <range> <range>" segfaulted, which has been + corrected. + + * The order in which various files that make up a single (conceptual) + packfile has been reevaluated and straightened up. This matters in + correctness, as an incomplete set of files must not be shown to a + running Git. + + * The "mode" word is useless in a call to open(2) that does not + create a new file. Such a call in the files backend of the ref + subsystem has been cleaned up. + + * "git update-ref --stdin" failed to flush its output as needed, + which potentially led the conversation to a deadlock. + + * When "git am --abort" fails to abort correctly, it still exited + with exit status of 0, which has been corrected. + + * Correct nr and alloc members of strvec struct to be of type size_t. + + * "git stash", where the tentative change involves changing a + directory to a file (or vice versa), was confused, which has been + corrected. + + * "git clone" from a repository whose HEAD is unborn into a bare + repository didn't follow the branch name the other side used, which + is corrected. + + * "git cvsserver" had a long-standing bug in its authentication code, + which has finally been corrected (it is unclear and is a separate + question if anybody is seriously using it, though). + + * "git difftool --dir-diff" mishandled symbolic links. + + * Sensitive data in the HTTP trace were supposed to be redacted, but + we failed to do so in HTTP/2 requests. + + * "make clean" has been updated to remove leftover .depend/ + directories, even when it is not told to use them to compute header + dependencies. + + * Protocol v0 clients can get stuck parsing a malformed feature line. + + * A few kinds of changes "git status" can show were not documented. + (merge d2a534c515 ja/doc-status-types-and-copies later to maint). + + * Other code cleanup, docfix, build fix, etc. + (merge f188160be9 ab/bundle-remove-verbose-option later to maint). + (merge 8c6b4332b4 rs/close-pack-leakfix later to maint). + (merge 51b04c05b7 bs/difftool-msg-tweak later to maint). + (merge dd20e4a6db ab/make-compdb-fix later to maint). + (merge 6ffb990dc4 os/status-docfix later to maint). + (merge 100c2da2d3 rs/p3400-lose-tac later to maint). + (merge 76f3b69896 tb/aggregate-ignore-leading-whitespaces later to maint). diff --git a/Documentation/config.txt b/Documentation/config.txt index bf82766a6a..0c0e6b859f 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -298,6 +298,15 @@ pathname:: tilde expansion happens to such a string: `~/` is expanded to the value of `$HOME`, and `~user/` to the specified user's home directory. ++ +If a path starts with `%(prefix)/`, the remainder is interpreted as a +path relative to Git's "runtime prefix", i.e. relative to the location +where Git itself was installed. For example, `%(prefix)/bin/` refers to +the directory in which the Git executable itself lives. If Git was +compiled without runtime prefix support, the compiled-in prefix will be +subsituted instead. In the unlikely event that a literal path needs to +be specified that should _not_ be expanded, it needs to be prefixed by +`./`, like so: `./%(prefix)/bin`. Variables diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 8b2849ff7b..063eec2511 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -44,6 +44,9 @@ advice.*:: Shown when linkgit:git-push[1] rejects a forced update of a branch when its remote-tracking ref has updates that we do not have locally. + skippedCherryPicks:: + Shown when linkgit:git-rebase[1] skips a commit that has already + been cherry-picked onto the upstream branch. statusAheadBehind:: Shown when linkgit:git-status[1] computes the ahead/behind counts for a local ref compared to its remote tracking ref, diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt index cc5f3249fc..d323d7327f 100644 --- a/Documentation/config/branch.txt +++ b/Documentation/config/branch.txt @@ -85,10 +85,6 @@ When `merges` (or just 'm'), pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When `preserve` (or just 'p', deprecated in favor of `merges`), also pass -`--preserve-merges` along to 'git rebase' so that locally committed merge -commits will not be flattened by running 'git pull'. -+ When the value is `interactive` (or just 'i'), the rebase is run in interactive mode. + diff --git a/Documentation/config/gui.txt b/Documentation/config/gui.txt index d30831a130..0c087fd8c9 100644 --- a/Documentation/config/gui.txt +++ b/Documentation/config/gui.txt @@ -11,7 +11,7 @@ gui.displayUntracked:: in the file list. The default is "true". gui.encoding:: - Specifies the default encoding to use for displaying of + Specifies the default character encoding to use for displaying of file contents in linkgit:git-gui[1] and linkgit:gitk[1]. It can be overridden by setting the 'encoding' attribute for relevant files (see linkgit:gitattributes[5]). diff --git a/Documentation/config/help.txt b/Documentation/config/help.txt index 783a90a0f9..610701f9a3 100644 --- a/Documentation/config/help.txt +++ b/Documentation/config/help.txt @@ -9,13 +9,15 @@ help.format:: help.autoCorrect:: If git detects typos and can identify exactly one valid command similar - to the error, git will automatically run the intended command after - waiting a duration of time defined by this configuration value in - deciseconds (0.1 sec). If this value is 0, the suggested corrections - will be shown, but not executed. If it is a negative integer, or - "immediate", the suggested command - is run immediately. If "never", suggestions are not shown at all. The - default value is zero. + to the error, git will try to suggest the correct command or even + run the suggestion automatically. Possible config values are: + - 0 (default): show the suggested command. + - positive number: run the suggested command after specified +deciseconds (0.1 sec). + - "immediate": run the suggested command immediately. + - "prompt": show the suggestion and prompt for confirmation to run +the command. + - "never": don't run or show any suggested command. help.htmlPath:: Specify the path where the HTML documentation resides. File system paths diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 763f7af7c4..ad7f73a1ea 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -159,6 +159,10 @@ pack.writeBitmapHashCache:: between an older, bitmapped pack and objects that have been pushed since the last gc). The downside is that it consumes 4 bytes per object of disk space. Defaults to true. ++ +When writing a multi-pack reachability bitmap, no new namehashes are +computed; instead, any namehashes stored in an existing bitmap are +permuted into their appropriate location when writing a new bitmap. pack.writeReverseIndex:: When true, git will write a corresponding .rev file (see: diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt index 5404830609..9349e09261 100644 --- a/Documentation/config/pull.txt +++ b/Documentation/config/pull.txt @@ -18,10 +18,6 @@ When `merges` (or just 'm'), pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When `preserve` (or just 'p', deprecated in favor of `merges`), also pass -`--preserve-merges` along to 'git rebase' so that locally committed merge -commits will not be flattened by running 'git pull'. -+ When the value is `interactive` (or just 'i'), the rebase is run in interactive mode. + diff --git a/Documentation/config/transfer.txt b/Documentation/config/transfer.txt index 505126a780..b49429eb4d 100644 --- a/Documentation/config/transfer.txt +++ b/Documentation/config/transfer.txt @@ -52,13 +52,17 @@ If you have multiple hideRefs values, later entries override earlier ones (and entries in more-specific config files override less-specific ones). + If a namespace is in use, the namespace prefix is stripped from each -reference before it is matched against `transfer.hiderefs` patterns. +reference before it is matched against `transfer.hiderefs` patterns. In +order to match refs before stripping, add a `^` in front of the ref name. If +you combine `!` and `^`, `!` must be specified first. ++ For example, if `refs/heads/master` is specified in `transfer.hideRefs` and the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master` -is omitted from the advertisements but `refs/heads/master` and -`refs/namespaces/bar/refs/heads/master` are still advertised as so-called -"have" lines. In order to match refs before stripping, add a `^` in front of -the ref name. If you combine `!` and `^`, `!` must be specified first. +is omitted from the advertisements. If `uploadpack.allowRefInWant` is set, +`upload-pack` will treat `want-ref refs/heads/master` in a protocol v2 +`fetch` command as if `refs/namespaces/foo/refs/heads/master` did not exist. +`receive-pack`, on the other hand, will still advertise the object id the +ref is pointing to without mentioning its name (a so-called ".have" line). + Even if you hide refs, a client may still be able to steal the target objects via the techniques described in the "SECURITY" section of the diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index fbbd410a84..7a9c3b6ff4 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -59,7 +59,7 @@ Possible status letters are: - D: deletion of a file - M: modification of the contents or mode of a file - R: renaming of a file -- T: change in the type of the file +- T: change in the type of the file (regular file, symbolic link or submodule) - U: file is unmerged (you must complete the merge before it can be committed) - X: "unknown" change type (most probably a bug, please report it) diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index be5e3ac54b..11eb70f16c 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git add' [--verbose | -v] [--dry-run | -n] [--force | -f] [--interactive | -i] [--patch | -p] - [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]] + [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]] [--sparse] [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing] [--renormalize] [--chmod=(+|-)x] [--pathspec-from-file=<file> [--pathspec-file-nul]] [--] [<pathspec>...] @@ -79,6 +79,13 @@ in linkgit:gitglossary[7]. --force:: Allow adding otherwise ignored files. +--sparse:: + Allow updating index entries outside of the sparse-checkout cone. + Normally, `git add` refuses to update index entries whose paths do + not fit within the sparse-checkout cone, since those files might + be removed from the working tree without warning. See + linkgit:git-sparse-checkout[1] for more details. + -i:: --interactive:: Add modified contents in the working tree interactively to diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 8714dfcb76..0a4a984dfd 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -178,6 +178,8 @@ default. You can use `--no-utf8` to override this. --abort:: Restore the original branch and abort the patching operation. + Revert contents of files involved in the am operation to their + pre-am state. --quit:: Abort the patching operation but keep HEAD and the index diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 94dc9a54f2..5449767121 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -118,7 +118,8 @@ OPTIONS Reset <branchname> to <startpoint>, even if <branchname> exists already. Without `-f`, 'git branch' refuses to change an existing branch. In combination with `-d` (or `--delete`), allow deleting the - branch irrespective of its merged status. In combination with + branch irrespective of its merged status, or whether it even + points to a valid commit. In combination with `-m` (or `--move`), allow renaming the branch even if the new branch name already exists, the same applies for `-c` (or `--copy`). diff --git a/Documentation/git-bugreport.txt b/Documentation/git-bugreport.txt index 66e88c2e31..d8817bf3ce 100644 --- a/Documentation/git-bugreport.txt +++ b/Documentation/git-bugreport.txt @@ -40,8 +40,8 @@ OPTIONS ------- -o <path>:: --output-directory <path>:: - Place the resulting bug report file in `<path>` instead of the root of - the Git repository. + Place the resulting bug report file in `<path>` instead of the current + directory. -s <format>:: --suffix <format>:: diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 53804cad4b..71b5ecabd1 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -13,26 +13,53 @@ SYNOPSIS [--version=<version>] <file> <git-rev-list-args> 'git bundle' verify [-q | --quiet] <file> 'git bundle' list-heads <file> [<refname>...] -'git bundle' unbundle <file> [<refname>...] +'git bundle' unbundle [--progress] <file> [<refname>...] DESCRIPTION ----------- -Some workflows require that one or more branches of development on one -machine be replicated on another machine, but the two machines cannot -be directly connected, and therefore the interactive Git protocols (git, -ssh, http) cannot be used. +Create, unpack, and manipulate "bundle" files. Bundles are used for +the "offline" transfer of Git objects without an active "server" +sitting on the other side of the network connection. -The 'git bundle' command packages objects and references in an archive -at the originating machine, which can then be imported into another -repository using 'git fetch', 'git pull', or 'git clone', -after moving the archive by some means (e.g., by sneakernet). +They can be used to create both incremental and full backups of a +repository, and to relay the state of the references in one repository +to another. -As no -direct connection between the repositories exists, the user must specify a -basis for the bundle that is held by the destination repository: the -bundle assumes that all objects in the basis are already in the -destination repository. +Git commands that fetch or otherwise "read" via protocols such as +`ssh://` and `https://` can also operate on bundle files. It is +possible linkgit:git-clone[1] a new repository from a bundle, to use +linkgit:git-fetch[1] to fetch from one, and to list the references +contained within it with linkgit:git-ls-remote[1]. There's no +corresponding "write" support, i.e.a 'git push' into a bundle is not +supported. + +See the "EXAMPLES" section below for examples of how to use bundles. + +BUNDLE FORMAT +------------- + +Bundles are `.pack` files (see linkgit:git-pack-objects[1]) with a +header indicating what references are contained within the bundle. + +Like the the packed archive format itself bundles can either be +self-contained, or be created using exclusions. +See the "OBJECT PREREQUISITES" section below. + +Bundles created using revision exclusions are "thin packs" created +using the `--thin` option to linkgit:git-pack-objects[1], and +unbundled using the `--fix-thin` option to linkgit:git-index-pack[1]. + +There is no option to create a "thick pack" when using revision +exclusions, users should not be concerned about the difference. By +using "thin packs" bundles created using exclusions are smaller in +size. That they're "thin" under the hood is merely noted here as a +curiosity, and as a reference to other documentation + +See link:technical/bundle-format.html[the `bundle-format` +documentation] for more details and the discussion of "thin pack" in +link:technical/pack-format.html[the pack format documentation] for +further details. OPTIONS ------- @@ -117,28 +144,88 @@ unbundle <file>:: SPECIFYING REFERENCES --------------------- -'git bundle' will only package references that are shown by -'git show-ref': this includes heads, tags, and remote heads. References -such as `master~1` cannot be packaged, but are perfectly suitable for -defining the basis. More than one reference may be packaged, and more -than one basis can be specified. The objects packaged are those not -contained in the union of the given bases. Each basis can be -specified explicitly (e.g. `^master~10`), or implicitly (e.g. -`master~10..master`, `--since=10.days.ago master`). +Revisions must accompanied by reference names to be packaged in a +bundle. + +More than one reference may be packaged, and more than one set of prerequisite objects can +be specified. The objects packaged are those not contained in the +union of the prerequisites. + +The 'git bundle create' command resolves the reference names for you +using the same rules as `git rev-parse --abbrev-ref=loose`. Each +prerequisite can be specified explicitly (e.g. `^master~10`), or implicitly +(e.g. `master~10..master`, `--since=10.days.ago master`). + +All of these simple cases are OK (assuming we have a "master" and +"next" branch): + +---------------- +$ git bundle create master.bundle master +$ echo master | git bundle create master.bundle --stdin +$ git bundle create master-and-next.bundle master next +$ (echo master; echo next) | git bundle create master-and-next.bundle --stdin +---------------- + +And so are these (and the same but omitted `--stdin` examples): + +---------------- +$ git bundle create recent-master.bundle master~10..master +$ git bundle create recent-updates.bundle master~10..master next~5..next +---------------- + +A revision name or a range whose right-hand-side cannot be resolved to +a reference is not accepted: + +---------------- +$ git bundle create HEAD.bundle $(git rev-parse HEAD) +fatal: Refusing to create empty bundle. +$ git bundle create master-yesterday.bundle master~10..master~5 +fatal: Refusing to create empty bundle. +---------------- + +OBJECT PREREQUISITES +-------------------- + +When creating bundles it is possible to create a self-contained bundle +that can be unbundled in a repository with no common history, as well +as providing negative revisions to exclude objects needed in the +earlier parts of the history. + +Feeding a revision such as `new` to `git bundle create` will create a +bundle file that contains all the objects reachable from the revision +`new`. That bundle can be unbundled in any repository to obtain a full +history that leads to the revision `new`: + +---------------- +$ git bundle create full.bundle new +---------------- + +A revision range such as `old..new` will produce a bundle file that +will require the revision `old` (and any objects reachable from it) +to exist for the bundle to be "unbundle"-able: + +---------------- +$ git bundle create full.bundle old..new +---------------- + +A self-contained bundle without any prerequisites can be extracted +into anywhere, even into an empty repository, or be cloned from +(i.e., `new`, but not `old..new`). -It is very important that the basis used be held by the destination. It is okay to err on the side of caution, causing the bundle file to contain objects already in the destination, as these are ignored when unpacking at the destination. -`git clone` can use any bundle created without negative refspecs -(e.g., `new`, but not `old..new`). If you want to match `git clone --mirror`, which would include your refs such as `refs/remotes/*`, use `--all`. If you want to provide the same set of refs that a clone directly from the source repository would get, use `--branches --tags` for the `<git-rev-list-args>`. +The 'git bundle verify' command can be used to check whether your +recipient repository has the required prerequisite commits for a +bundle. + EXAMPLES -------- @@ -149,7 +236,7 @@ but we can move data from A to B via some mechanism (CD, email, etc.). We want to update R2 with development made on the branch master in R1. To bootstrap the process, you can first create a bundle that does not have -any basis. You can use a tag to remember up to what commit you last +any prerequisites. You can use a tag to remember up to what commit you last processed, in order to make it easy to later update the other repository with an incremental bundle: @@ -200,7 +287,7 @@ machineB$ git pull If you know up to what commit the intended recipient repository should have the necessary objects, you can use that knowledge to specify the -basis, giving a cut-off point to limit the revisions and objects that go +prerequisites, giving a cut-off point to limit the revisions and objects that go in the resulting bundle. The previous example used the lastR2bundle tag for this purpose, but you can use any other options that you would give to the linkgit:git-log[1] command. Here are more examples: @@ -211,7 +298,7 @@ You can use a tag that is present in both: $ git bundle create mybundle v1.0.0..master ---------------- -You can use a basis based on time: +You can use a prerequisite based on time: ---------------- $ git bundle create mybundle --since=10.days master @@ -224,7 +311,7 @@ $ git bundle create mybundle -10 master ---------------- You can run `git-bundle verify` to see if you can extract from a bundle -that was created with a basis: +that was created with a prerequisite: ---------------- $ git bundle verify mybundle diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index b1a6fe4499..d473c9bf38 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -118,8 +118,9 @@ OPTIONS -f:: --force:: When switching branches, proceed even if the index or the - working tree differs from `HEAD`. This is used to throw away - local changes. + working tree differs from `HEAD`, and even if there are untracked + files in the way. This is used to throw away local changes and + any untracked files or directories that are in the way. + When checking out paths from the index, do not fail upon unmerged entries; instead, unmerged entries are ignored. diff --git a/Documentation/git-column.txt b/Documentation/git-column.txt index f58e9c43e6..6cea9ab463 100644 --- a/Documentation/git-column.txt +++ b/Documentation/git-column.txt @@ -39,7 +39,7 @@ OPTIONS --indent=<string>:: String to be printed at the beginning of each line. ---nl=<N>:: +--nl=<string>:: String to be printed at the end of each line, including newline character. diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 2dc4bae6da..992225f612 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -71,6 +71,9 @@ codes are: On success, the command returns the exit code 0. +A list of all available configuration variables can be obtained using the +`git help --config` command. + [[OPTIONS]] OPTIONS ------- diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index f2e4a47ebe..4dc57ed254 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -99,7 +99,7 @@ looks like ------ -Only anonymous access is provided by pserve by default. To commit you +Only anonymous access is provided by pserver by default. To commit you will have to create pserver accounts, simply add a gitcvs.authdb setting in the config file of the repositories you want the cvsserver to allow writes to, for example: @@ -114,21 +114,20 @@ The format of these files is username followed by the encrypted password, for example: ------ - myuser:$1Oyx5r9mdGZ2 - myuser:$1$BA)@$vbnMJMDym7tA32AamXrm./ + myuser:sqkNi8zPf01HI + myuser:$1$9K7FzU28$VfF6EoPYCJEYcVQwATgOP/ + myuser:$5$.NqmNH1vwfzGpV8B$znZIcumu1tNLATgV2l6e1/mY8RzhUDHMOaVOeL1cxV3 ------ You can use the 'htpasswd' facility that comes with Apache to make these -files, but Apache's MD5 crypt method differs from the one used by most C -library's crypt() function, so don't use the -m option. +files, but only with the -d option (or -B if your system suports it). -Alternatively you can produce the password with perl's crypt() operator: ------ - perl -e 'my ($user, $pass) = @ARGV; printf "%s:%s\n", $user, crypt($user, $pass)' $USER password ------ +Preferably use the system specific utility that manages password hash +creation in your platform (e.g. mkpasswd in Linux, encrypt in OpenBSD or +pwhash in NetBSD) and paste it in the right location. Then provide your password via the pserver method, for example: ------ - cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name> + cvs -d:pserver:someuser:somepassword@server:/path/repo.git co <HEAD_name> ------ No special setup is needed for SSH access, other than having Git tools in the PATH. If you have clients that do not accept the CVS_SERVER @@ -138,7 +137,7 @@ Note: Newer CVS versions (>= 1.12.11) also support specifying CVS_SERVER directly in CVSROOT like ------ -cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name> + cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name> ------ This has the advantage that it will be saved in your 'CVS/Root' files and you don't need to worry about always setting the correct environment @@ -186,8 +185,8 @@ allowing access over SSH. + -- ------ - export CVSROOT=:ext:user@server:/var/git/project.git - export CVS_SERVER="git cvsserver" + export CVSROOT=:ext:user@server:/var/git/project.git + export CVS_SERVER="git cvsserver" ------ -- 4. For SSH clients that will make commits, make sure their server-side @@ -203,7 +202,7 @@ allowing access over SSH. `project-master` directory: + ------ - cvs co -d project-master master + cvs co -d project-master master ------ [[dbbackend]] diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 2ae2478de7..6da899c629 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -235,6 +235,15 @@ and `date` to extract the named component. For email fields (`authoremail`, without angle brackets, and `:localpart` to get the part before the `@` symbol out of the trimmed email. +The raw data in an object is `raw`. + +raw:size:: + The raw data size of the object. + +Note that `--format=%(raw)` can not be used with `--python`, `--shell`, `--tcl`, +because such language may not support arbitrary binary data in their string +variable type. + The message in a commit or a tag object is `contents`, from which `contents:<part>` can be used to extract various parts out of: diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index 44fe8860b3..96d5f598b4 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -8,8 +8,10 @@ git-help - Display help information about Git SYNOPSIS -------- [verse] -'git help' [-a|--all [--[no-]verbose]] [-g|--guides] - [-i|--info|-m|--man|-w|--web] [COMMAND|GUIDE] +'git help' [-a|--all [--[no-]verbose]] + [[-i|--info] [-m|--man] [-w|--web]] [COMMAND|GUIDE] +'git help' [-g|--guides] +'git help' [-c|--config] DESCRIPTION ----------- @@ -58,8 +60,7 @@ OPTIONS -g:: --guides:: - Prints a list of the Git concept guides on the standard output. This - option overrides any given command or guide name. + Prints a list of the Git concept guides on the standard output. -i:: --info:: diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 558966aa83..0c5c0dde19 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -16,7 +16,9 @@ A simple CGI program to serve the contents of a Git repository to Git clients accessing the repository over http:// and https:// protocols. The program supports clients fetching using both the smart HTTP protocol and the backwards-compatible dumb HTTP protocol, as well as clients -pushing using the smart HTTP protocol. +pushing using the smart HTTP protocol. It also supports Git's +more-efficient "v2" protocol if properly configured; see the +discussion of `GIT_PROTOCOL` in the ENVIRONMENT section below. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any Git directory @@ -77,6 +79,18 @@ Apache 2.x:: SetEnv GIT_PROJECT_ROOT /var/www/git SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/ + +# This is not strictly necessary using Apache and a modern version of +# git-http-backend, as the webserver will pass along the header in the +# environment as HTTP_GIT_PROTOCOL, and http-backend will copy that into +# GIT_PROTOCOL. But you may need this line (or something similar if you +# are using a different webserver), or if you want to support older Git +# versions that did not do that copying. +# +# Having the webserver set up GIT_PROTOCOL is perfectly fine even with +# modern versions (and will take precedence over HTTP_GIT_PROTOCOL, +# which means it can be used to override the client's request). +SetEnvIf Git-Protocol ".*" GIT_PROTOCOL=$0 ---------------------------------------------------------------- + To enable anonymous read access but authenticated write access, @@ -264,6 +278,16 @@ a repository with an extremely large number of refs. The value can be specified with a unit (e.g., `100M` for 100 megabytes). The default is 10 megabytes. +Clients may probe for optional protocol capabilities (like the v2 +protocol) using the `Git-Protocol` HTTP header. In order to support +these, the contents of that header must appear in the `GIT_PROTOCOL` +environment variable. Most webservers will pass this header to the CGI +via the `HTTP_GIT_PROTOCOL` variable, and `git-http-backend` will +automatically copy that to `GIT_PROTOCOL`. However, some webservers may +be more selective about which headers they'll pass, in which case they +need to be configured explicitly (see the mention of `Git-Protocol` in +the Apache config from the earlier EXAMPLES section). + The backend process sets GIT_COMMITTER_NAME to '$REMOTE_USER' and GIT_COMMITTER_EMAIL to '$\{REMOTE_USER}@http.$\{REMOTE_ADDR\}', ensuring that any reflogs created by 'git-receive-pack' contain some diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 7fa74b9e79..1f1e359225 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -82,6 +82,12 @@ OPTIONS --strict:: Die, if the pack contains broken objects or links. +--progress-title:: + For internal use only. ++ +Set the title of the progress bar. The title is "Receiving objects" by +default and "Indexing objects" when `--stdin` is specified. + --check-self-contained-and-connected:: Die if the pack contains broken links. For internal use only. diff --git a/Documentation/git-maintenance.txt b/Documentation/git-maintenance.txt index 1e738ad398..e2cfb68ab5 100644 --- a/Documentation/git-maintenance.txt +++ b/Documentation/git-maintenance.txt @@ -179,6 +179,17 @@ OPTIONS `maintenance.<task>.enabled` configured as `true` are considered. See the 'TASKS' section for the list of accepted `<task>` values. +--scheduler=auto|crontab|systemd-timer|launchctl|schtasks:: + When combined with the `start` subcommand, specify the scheduler + for running the hourly, daily and weekly executions of + `git maintenance run`. + Possible values for `<scheduler>` are `auto`, `crontab` + (POSIX), `systemd-timer` (Linux), `launchctl` (macOS), and + `schtasks` (Windows). When `auto` is specified, the + appropriate platform-specific scheduler is used; on Linux, + `systemd-timer` is used if available, otherwise + `crontab`. Default is `auto`. + TROUBLESHOOTING --------------- @@ -277,6 +288,52 @@ schedule to ensure you are executing the correct binaries in your schedule. +BACKGROUND MAINTENANCE ON LINUX SYSTEMD SYSTEMS +----------------------------------------------- + +While Linux supports `cron`, depending on the distribution, `cron` may +be an optional package not necessarily installed. On modern Linux +distributions, systemd timers are superseding it. + +If user systemd timers are available, they will be used as a replacement +of `cron`. + +In this case, `git maintenance start` will create user systemd timer units +and start the timers. The current list of user-scheduled tasks can be found +by running `systemctl --user list-timers`. The timers written by `git +maintenance start` are similar to this: + +----------------------------------------------------------------------- +$ systemctl --user list-timers +NEXT LEFT LAST PASSED UNIT ACTIVATES +Thu 2021-04-29 19:00:00 CEST 42min left Thu 2021-04-29 18:00:11 CEST 17min ago git-maintenance@hourly.timer git-maintenance@hourly.service +Fri 2021-04-30 00:00:00 CEST 5h 42min left Thu 2021-04-29 00:00:11 CEST 18h ago git-maintenance@daily.timer git-maintenance@daily.service +Mon 2021-05-03 00:00:00 CEST 3 days left Mon 2021-04-26 00:00:11 CEST 3 days ago git-maintenance@weekly.timer git-maintenance@weekly.service +----------------------------------------------------------------------- + +One timer is registered for each `--schedule=<frequency>` option. + +The definition of the systemd units can be inspected in the following files: + +----------------------------------------------------------------------- +~/.config/systemd/user/git-maintenance@.timer +~/.config/systemd/user/git-maintenance@.service +~/.config/systemd/user/timers.target.wants/git-maintenance@hourly.timer +~/.config/systemd/user/timers.target.wants/git-maintenance@daily.timer +~/.config/systemd/user/timers.target.wants/git-maintenance@weekly.timer +----------------------------------------------------------------------- + +`git maintenance start` will overwrite these files and start the timer +again with `systemctl --user`, so any customization should be done by +creating a drop-in file, i.e. a `.conf` suffixed file in the +`~/.config/systemd/user/git-maintenance@.service.d` directory. + +`git maintenance stop` will stop the user systemd timers and delete +the above mentioned files. + +For more details, see `systemd.timer(5)`. + + BACKGROUND MAINTENANCE ON MACOS SYSTEMS --------------------------------------- diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 3819fadac1..e4f3352eb5 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -61,6 +61,8 @@ merge has resulted in conflicts. OPTIONS ------- +:git-merge: 1 + include::merge-options.txt[] -m <msg>:: diff --git a/Documentation/git-multi-pack-index.txt b/Documentation/git-multi-pack-index.txt index ffd601bc17..b008ce2850 100644 --- a/Documentation/git-multi-pack-index.txt +++ b/Documentation/git-multi-pack-index.txt @@ -9,8 +9,7 @@ git-multi-pack-index - Write and verify multi-pack-indexes SYNOPSIS -------- [verse] -'git multi-pack-index' [--object-dir=<dir>] [--[no-]progress] - [--preferred-pack=<pack>] <subcommand> +'git multi-pack-index' [--object-dir=<dir>] [--[no-]bitmap] <sub-command> DESCRIPTION ----------- @@ -23,10 +22,13 @@ OPTIONS Use given directory for the location of Git objects. We check `<dir>/packs/multi-pack-index` for the current MIDX file, and `<dir>/packs` for the pack-files to index. ++ +`<dir>` must be an alternate of the current repository. --[no-]progress:: Turn progress on/off explicitly. If neither is specified, progress is - shown if standard error is connected to a terminal. + shown if standard error is connected to a terminal. Supported by + sub-commands `write`, `verify`, `expire`, and `repack. The following subcommands are available: @@ -37,9 +39,31 @@ write:: -- --preferred-pack=<pack>:: Optionally specify the tie-breaking pack used when - multiple packs contain the same object. If not given, - ties are broken in favor of the pack with the lowest - mtime. + multiple packs contain the same object. `<pack>` must + contain at least one object. If not given, ties are + broken in favor of the pack with the lowest mtime. + + --[no-]bitmap:: + Control whether or not a multi-pack bitmap is written. + + --stdin-packs:: + Write a multi-pack index containing only the set of + line-delimited pack index basenames provided over stdin. + + --refs-snapshot=<path>:: + With `--bitmap`, optionally specify a file which + contains a "refs snapshot" taken prior to repacking. ++ +A reference snapshot is composed of line-delimited OIDs corresponding to +the reference tips, usually taken by `git repack` prior to generating a +new pack. A line may optionally start with a `+` character to indicate +that the reference which corresponds to that OID is "preferred" (see +linkgit:git-config[1]'s `pack.preferBitmapTips`.) ++ +The file given at `<path>` is expected to be readable, and can contain +duplicates. (If a given OID is given more than once, it is marked as +preferred if at least one instance of it begins with the special `+` +marker). -- verify:: @@ -81,6 +105,13 @@ EXAMPLES $ git multi-pack-index write ----------------------------------------------- +* Write a MIDX file for the packfiles in the current .git folder with a +corresponding bitmap. ++ +------------------------------------------------------------- +$ git multi-pack-index write --preferred-pack=<pack> --bitmap +------------------------------------------------------------- + * Write a MIDX file for the packfiles in an alternate object store. + ----------------------------------------------- diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 7f4b2d1982..0e14f8b5b2 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -15,14 +15,17 @@ SYNOPSIS DESCRIPTION ----------- -Incorporates changes from a remote repository into the current -branch. In its default mode, `git pull` is shorthand for -`git fetch` followed by `git merge FETCH_HEAD`. - -More precisely, 'git pull' runs 'git fetch' with the given -parameters and calls 'git merge' to merge the retrieved branch -heads into the current branch. -With `--rebase`, it runs 'git rebase' instead of 'git merge'. +Incorporates changes from a remote repository into the current branch. +If the current branch is behind the remote, then by default it will +fast-forward the current branch to match the remote. If the current +branch and the remote have diverged, the user needs to specify how to +reconcile the divergent branches with `--rebase` or `--no-rebase` (or +the corresponding configuration option in `pull.rebase`). + +More precisely, `git pull` runs `git fetch` with the given parameters +and then depending on configuration options or command line flags, +will call either `git rebase` or `git merge` to reconcile diverging +branches. <repository> should be the name of a remote repository as passed to linkgit:git-fetch[1]. <refspec> can name an @@ -102,7 +105,7 @@ Options related to merging include::merge-options.txt[] -r:: ---rebase[=false|true|merges|preserve|interactive]:: +--rebase[=false|true|merges|interactive]:: When true, rebase the current branch on top of the upstream branch after fetching. If there is a remote-tracking branch corresponding to the upstream branch and the upstream branch @@ -113,10 +116,6 @@ When set to `merges`, rebase using `git rebase --rebase-merges` so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When set to `preserve` (deprecated in favor of `merges`), rebase with the -`--preserve-merges` option passed to `git rebase` so that locally created -merge commits will not be flattened. -+ When false, merge the upstream branch into the current branch. + When `interactive`, enable the interactive mode of rebase. @@ -132,7 +131,7 @@ published that history already. Do *not* use this option unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: - Override earlier --rebase. + This is shorthand for --rebase=false. Options related to fetching ~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 5fa8bab64c..8c3aceb832 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -10,8 +10,7 @@ SYNOPSIS -------- [verse] 'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] - [-u [--exclude-per-directory=<gitignore>] | -i]] - [--index-output=<file>] [--no-sparse-checkout] + [-u | -i]] [--index-output=<file>] [--no-sparse-checkout] (--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]]) @@ -39,8 +38,9 @@ OPTIONS --reset:: Same as -m, except that unmerged entries are discarded instead - of failing. When used with `-u`, updates leading to loss of - working tree changes will not abort the operation. + of failing. When used with `-u`, updates leading to loss of + working tree changes or untracked files or directories will not + abort the operation. -u:: After a successful merge, update the files in the work @@ -88,21 +88,6 @@ OPTIONS The command will refuse to overwrite entries that already existed in the original index file. ---exclude-per-directory=<gitignore>:: - When running the command with `-u` and `-m` options, the - merge result may need to overwrite paths that are not - tracked in the current branch. The command usually - refuses to proceed with the merge to avoid losing such a - path. However this safety valve sometimes gets in the - way. For example, it often happens that the other - branch added a file that used to be a generated file in - your branch, and the safety valve triggers when you try - to switch to that branch after you ran `make` but before - running `make clean` to remove the generated file. This - option tells the command to read per-directory exclude - file (usually '.gitignore') and allows such an untracked - but explicitly ignored file to be overwritten. - --index-output=<file>:: Instead of writing the results out to `$GIT_INDEX_FILE`, write the resulting index in the named file. While the diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 55af6fd24e..a1af21fcef 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -79,9 +79,10 @@ remain the checked-out branch. If the upstream branch already contains a change you have made (e.g., because you mailed a patch which was applied upstream), then that commit -will be skipped. For example, running `git rebase master` on the -following history (in which `A'` and `A` introduce the same set of changes, -but have different committer information): +will be skipped and warnings will be issued (if the `merge` backend is +used). For example, running `git rebase master` on the following +history (in which `A'` and `A` introduce the same set of changes, but +have different committer information): ------------ A---B---C topic @@ -312,7 +313,10 @@ See also INCOMPATIBLE OPTIONS below. By default (or if `--no-reapply-cherry-picks` is given), these commits will be automatically dropped. Because this necessitates reading all upstream commits, this can be expensive in repos with a large number -of upstream commits that need to be read. +of upstream commits that need to be read. When using the `merge` +backend, warnings will be issued for each dropped commit (unless +`--quiet` is given). Advice will also be issued unless +`advice.skippedCherryPicks` is set to false (see linkgit:git-config[1]). + `--reapply-cherry-picks` allows rebase to forgo reading all upstream commits, potentially improving performance. @@ -340,9 +344,7 @@ See also INCOMPATIBLE OPTIONS below. -m:: --merge:: - Use merging strategies to rebase. When the recursive (default) merge - strategy is used, this allows rebase to be aware of renames on the - upstream side. This is the default. + Using merging strategies to rebase (default). + Note that a rebase merge works by replaying each commit from the working branch on top of the <upstream> branch. Because of this, when a merge @@ -354,9 +356,8 @@ See also INCOMPATIBLE OPTIONS below. -s <strategy>:: --strategy=<strategy>:: - Use the given merge strategy. - If there is no `-s` option 'git merge-recursive' is used - instead. This implies --merge. + Use the given merge strategy, instead of the default `ort`. + This implies `--merge`. + Because 'git rebase' replays each commit from the working branch on top of the <upstream> branch using the given strategy, using @@ -369,7 +370,7 @@ See also INCOMPATIBLE OPTIONS below. --strategy-option=<strategy-option>:: Pass the <strategy-option> through to the merge strategy. This implies `--merge` and, if no strategy has been - specified, `-s recursive`. Note the reversal of 'ours' and + specified, `-s ort`. Note the reversal of 'ours' and 'theirs' as noted above for the `-m` option. + See also INCOMPATIBLE OPTIONS below. @@ -445,7 +446,8 @@ When --fork-point is active, 'fork_point' will be used instead of ends up being empty, the <upstream> will be used as a fallback. + If <upstream> is given on the command line, then the default is -`--no-fork-point`, otherwise the default is `--fork-point`. +`--no-fork-point`, otherwise the default is `--fork-point`. See also +`rebase.forkpoint` in linkgit:git-config[1]. + If your branch was based on <upstream> but <upstream> was rewound and your branch contains commits which were dropped, this option can be used @@ -525,29 +527,12 @@ i.e. commits that would be excluded by linkgit:git-log[1]'s the `rebase-cousins` mode is turned on, such commits are instead rebased onto `<upstream>` (or `<onto>`, if specified). + -The `--rebase-merges` mode is similar in spirit to the deprecated -`--preserve-merges` but works with interactive rebases, -where commits can be reordered, inserted and dropped at will. -+ It is currently only possible to recreate the merge commits using the -`recursive` merge strategy; Different merge strategies can be used only via +`ort` merge strategy; different merge strategies can be used only via explicit `exec git merge -s <strategy> [...]` commands. + See also REBASING MERGES and INCOMPATIBLE OPTIONS below. --p:: ---preserve-merges:: - [DEPRECATED: use `--rebase-merges` instead] Recreate merge commits - instead of flattening the history by replaying commits a merge commit - introduces. Merge conflict resolutions or manual amendments to merge - commits are not preserved. -+ -This uses the `--interactive` machinery internally, but combining it -with the `--interactive` option explicitly is generally not a good -idea unless you know what you are doing (see BUGS below). -+ -See also INCOMPATIBLE OPTIONS below. - -x <cmd>:: --exec <cmd>:: Append "exec <cmd>" after each line creating a commit in the @@ -579,9 +564,6 @@ See also INCOMPATIBLE OPTIONS below. the root commit(s) on a branch. When used with --onto, it will skip changes already contained in <newbase> (instead of <upstream>) whereas without --onto it will operate on every change. - When used together with both --onto and --preserve-merges, - 'all' root commits will be rewritten to have <newbase> as parent - instead. + See also INCOMPATIBLE OPTIONS below. @@ -643,7 +625,6 @@ are incompatible with the following options: * --allow-empty-message * --[no-]autosquash * --rebase-merges - * --preserve-merges * --interactive * --exec * --no-keep-empty @@ -654,13 +635,6 @@ are incompatible with the following options: In addition, the following pairs of options are incompatible: - * --preserve-merges and --interactive - * --preserve-merges and --signoff - * --preserve-merges and --rebase-merges - * --preserve-merges and --empty= - * --preserve-merges and --ignore-whitespace - * --preserve-merges and --committer-date-is-author-date - * --preserve-merges and --ignore-date * --keep-base and --onto * --keep-base and --root * --fork-point and --root @@ -1219,12 +1193,16 @@ successful merge so that the user can edit the message. If a `merge` command fails for any reason other than merge conflicts (i.e. when the merge operation did not even start), it is rescheduled immediately. -At this time, the `merge` command will *always* use the `recursive` -merge strategy for regular merges, and `octopus` for octopus merges, -with no way to choose a different one. To work around -this, an `exec` command can be used to call `git merge` explicitly, -using the fact that the labels are worktree-local refs (the ref -`refs/rewritten/onto` would correspond to the label `onto`, for example). +By default, the `merge` command will use the `ort` merge strategy for +regular merges, and `octopus` for octopus merges. One can specify a +default strategy for all merges using the `--strategy` argument when +invoking rebase, or can override specific merges in the interactive +list of commands by using an `exec` command to call `git merge` +explicitly with a `--strategy` argument. Note that when calling `git +merge` explicitly like this, you can make use of the fact that the +labels are worktree-local refs (the ref `refs/rewritten/onto` would +correspond to the label `onto`, for example) in order to refer to the +branches you want to merge. Note: the first command (`label onto`) labels the revision onto which the commits are rebased; The name `onto` is just a convention, as a nod @@ -1274,29 +1252,6 @@ CONFIGURATION include::config/rebase.txt[] include::config/sequencer.txt[] -BUGS ----- -The todo list presented by the deprecated `--preserve-merges --interactive` -does not represent the topology of the revision graph (use `--rebase-merges` -instead). Editing commits and rewording their commit messages should work -fine, but attempts to reorder commits tend to produce counterintuitive results. -Use `--rebase-merges` in such scenarios instead. - -For example, an attempt to rearrange ------------- -1 --- 2 --- 3 --- 4 --- 5 ------------- -to ------------- -1 --- 2 --- 4 --- 3 --- 5 ------------- -by moving the "pick 4" line will result in the following history: ------------- - 3 - / -1 --- 2 --- 4 --- 5 ------------- - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index 25702ed730..014a78409b 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -41,6 +41,11 @@ OPTIONS <directory>:: The repository to sync into. +--http-backend-info-refs:: + Used by linkgit:git-http-backend[1] to serve up + `$GIT_URL/info/refs?service=git-receive-pack` requests. See + `--http-backend-info-refs` in linkgit:git-upload-pack[1]. + PRE-RECEIVE HOOK ---------------- Before any ref is updated, if $GIT_DIR/hooks/pre-receive file exists diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 24c00c9384..7183fb498f 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -9,7 +9,7 @@ git-repack - Pack unpacked objects in a repository SYNOPSIS -------- [verse] -'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [-b] [--window=<n>] [--depth=<n>] [--threads=<n>] [--keep-pack=<pack-name>] +'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [-b] [-m] [--window=<n>] [--depth=<n>] [--threads=<n>] [--keep-pack=<pack-name>] [--write-midx] DESCRIPTION ----------- @@ -128,10 +128,11 @@ depth is 4095. -b:: --write-bitmap-index:: Write a reachability bitmap index as part of the repack. This - only makes sense when used with `-a` or `-A`, as the bitmaps + only makes sense when used with `-a`, `-A` or `-m`, as the bitmaps must be able to refer to all reachable objects. This option - overrides the setting of `repack.writeBitmaps`. This option - has no effect if multiple packfiles are created. + overrides the setting of `repack.writeBitmaps`. This option + has no effect if multiple packfiles are created, unless writing a + MIDX (in which case a multi-pack bitmap is created). --pack-kept-objects:: Include objects in `.keep` files when repacking. Note that we @@ -189,6 +190,15 @@ this "roll-up", without respect to their reachability. This is subject to change in the future. This option (implying a drastically different repack mode) is not guaranteed to work with all other combinations of option to `git repack`. ++ +When writing a multi-pack bitmap, `git repack` selects the largest resulting +pack as the preferred pack for object selection by the MIDX (see +linkgit:git-multi-pack-index[1]). + +-m:: +--write-midx:: + Write a multi-pack index (see linkgit:git-multi-pack-index[1]) + containing the non-redundant packs. CONFIGURATION ------------- diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 252e2d4e47..6f7685f53d 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -69,7 +69,8 @@ linkgit:git-add[1]). --hard:: Resets the index and working tree. Any changes to tracked files in the - working tree since `<commit>` are discarded. + working tree since `<commit>` are discarded. Any untracked files or + directories in the way of writing any tracked files are simply deleted. --merge:: Resets the index and updates the files in the working tree that are diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 26e9b28470..81bc23f3cd 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -72,6 +72,12 @@ For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. --ignore-unmatch:: Exit with a zero status even if no files matched. +--sparse:: + Allow updating index entries outside of the sparse-checkout cone. + Normally, `git rm` refuses to update index entries whose paths do + not fit within the sparse-checkout cone. See + linkgit:git-sparse-checkout[1] for more. + -q:: --quiet:: `git rm` normally outputs one line (in the form of an `rm` command) diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 44fd146b91..be41f11974 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -9,10 +9,10 @@ git-send-pack - Push objects over Git protocol to another repository SYNOPSIS -------- [verse] -'git send-pack' [--all] [--dry-run] [--force] [--receive-pack=<git-receive-pack>] +'git send-pack' [--dry-run] [--force] [--receive-pack=<git-receive-pack>] [--verbose] [--thin] [--atomic] [--[no-]signed|--signed=(true|false|if-asked)] - [<host>:]<directory> [<ref>...] + [<host>:]<directory> (--all | <ref>...) DESCRIPTION ----------- diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt index fdcf43f87c..42056ee9ff 100644 --- a/Documentation/git-sparse-checkout.txt +++ b/Documentation/git-sparse-checkout.txt @@ -210,6 +210,16 @@ case-insensitive check. This corrects for case mismatched filenames in the 'git sparse-checkout set' command to reflect the expected cone in the working directory. +When changing the sparse-checkout patterns in cone mode, Git will inspect each +tracked directory that is not within the sparse-checkout cone to see if it +contains any untracked files. If all of those files are ignored due to the +`.gitignore` patterns, then the directory will be deleted. If any of the +untracked files within that directory is not ignored, then no deletions will +occur within that directory and a warning message will appear. If these files +are important, then reset your sparse-checkout definition so they are included, +use `git add` and `git commit` to store them, then remove any remaining files +manually to ensure Git can behave optimally. + SUBMODULES ---------- diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 83f38e3198..4a2c3e0408 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -207,26 +207,29 @@ show tracked paths: * ' ' = unmodified * 'M' = modified +* 'T' = file type changed (regular file, symbolic link or submodule) * 'A' = added * 'D' = deleted * 'R' = renamed -* 'C' = copied +* 'C' = copied (if config option status.renames is set to "copies") * 'U' = updated but unmerged .... X Y Meaning ------------------------------------------------- [AMD] not updated -M [ MD] updated in index -A [ MD] added to index +M [ MTD] updated in index +T [ MTD] type changed in index +A [ MTD] added to index D deleted from index -R [ MD] renamed in index -C [ MD] copied in index -[MARC] index and work tree matches -[ MARC] M work tree changed since index -[ MARC] D deleted in work tree -[ D] R renamed in work tree -[ D] C copied in work tree +R [ MTD] renamed in index +C [ MTD] copied in index +[MTARC] index and work tree matches +[ MTARC] M work tree changed since index +[ MTARC] T type changed in work tree since index +[ MTARC] D deleted in work tree + R renamed in work tree + C copied in work tree ------------------------------------------------- D D unmerged, both deleted A U unmerged, added by us @@ -363,7 +366,7 @@ Field Meaning Unmerged entries have the following format; the first character is a "u" to distinguish from ordinary changed entries. - u <xy> <sub> <m1> <m2> <m3> <mW> <h1> <h2> <h3> <path> + u <XY> <sub> <m1> <m2> <m3> <mW> <h1> <h2> <h3> <path> .... Field Meaning diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index d5776ffcfd..222b556d7a 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -678,7 +678,6 @@ config key: svn.authorsProg --strategy=<strategy>:: -p:: --rebase-merges:: ---preserve-merges (DEPRECATED):: These are only used with the 'dcommit' and 'rebase' commands. + Passed directly to 'git rebase' when using 'dcommit' if a diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt index 9822c1eb1a..8f87b23ea8 100644 --- a/Documentation/git-upload-pack.txt +++ b/Documentation/git-upload-pack.txt @@ -36,14 +36,26 @@ OPTIONS This fits with the HTTP POST request processing model where a program may read the request, write a response, and must exit. ---advertise-refs:: - Only the initial ref advertisement is output, and the program exits - immediately. This fits with the HTTP GET request model, where - no request content is received but a response must be produced. +--http-backend-info-refs:: + Used by linkgit:git-http-backend[1] to serve up + `$GIT_URL/info/refs?service=git-upload-pack` requests. See + "Smart Clients" in link:technical/http-protocol.html[the HTTP + transfer protocols] documentation and "HTTP Transport" in + link:technical/protocol-v2.html[the Git Wire Protocol, Version + 2] documentation. Also understood by + linkgit:git-receive-pack[1]. <directory>:: The repository to sync from. +ENVIRONMENT +----------- + +`GIT_PROTOCOL`:: + Internal variable used for handshaking the wire protocol. Server + admins may need to configure some transports to allow this + variable to be passed. See the discussion in linkgit:git[1]. + SEE ALSO -------- linkgit:gitnamespaces[7] diff --git a/Documentation/git-version.txt b/Documentation/git-version.txt new file mode 100644 index 0000000000..80fa7754a6 --- /dev/null +++ b/Documentation/git-version.txt @@ -0,0 +1,28 @@ +git-version(1) +============== + +NAME +---- +git-version - Display version information about Git + +SYNOPSIS +-------- +[verse] +'git version' [--build-options] + +DESCRIPTION +----------- +With no options given, the version of 'git' is printed on the standard output. + +Note that `git --version` is identical to `git version` because the +former is internally converted into the latter. + +OPTIONS +------- +--build-options:: + Include additional information about how git was built for diagnostic + purposes. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index 6dd241ef83..d63c65e67d 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -41,6 +41,10 @@ OPTIONS ------- --version:: Prints the Git suite version that the 'git' program came from. ++ +This option is internaly converted to `git version ...` and accepts +the same options as the linkgit:git-version[1] command. If `--help` is +also given, it takes precedence over `--version`. --help:: Prints the synopsis and a list of the most commonly used @@ -863,15 +867,16 @@ for full details. end user, to be recorded in the body of the reflog. `GIT_REF_PARANOIA`:: - If set to `1`, include broken or badly named refs when iterating - over lists of refs. In a normal, non-corrupted repository, this - does nothing. However, enabling it may help git to detect and - abort some operations in the presence of broken refs. Git sets - this variable automatically when performing destructive - operations like linkgit:git-prune[1]. You should not need to set - it yourself unless you want to be paranoid about making sure - an operation has touched every ref (e.g., because you are - cloning a repository to make a backup). + If set to `0`, ignore broken or badly named refs when iterating + over lists of refs. Normally Git will try to include any such + refs, which may cause some operations to fail. This is usually + preferable, as potentially destructive operations (e.g., + linkgit:git-prune[1]) are better off aborting rather than + ignoring broken refs (and thus considering the history they + point to as not worth saving). The default value is `1` (i.e., + be paranoid about detecting and aborting all operations). You + should not normally need to set this to `0`, but it may be + useful when trying to salvage data from a corrupted repository. `GIT_ALLOW_PROTOCOL`:: If set to a colon-separated list of protocols, behave as if @@ -894,6 +899,21 @@ for full details. Contains a colon ':' separated list of keys with optional values 'key[=value]'. Presence of unknown keys and values must be ignored. ++ +Note that servers may need to be configured to allow this variable to +pass over some transports. It will be propagated automatically when +accessing local repositories (i.e., `file://` or a filesystem path), as +well as over the `git://` protocol. For git-over-http, it should work +automatically in most configurations, but see the discussion in +linkgit:git-http-backend[1]. For git-over-ssh, the ssh server may need +to be configured to allow clients to pass this variable (e.g., by using +`AcceptEnv GIT_PROTOCOL` with OpenSSH). ++ +This configuration is optional. If the variable is not propagated, then +clients will fall back to the original "v0" protocol (but may miss out +on some performance improvements or features). This variable currently +only affects clones and fetches; it is not yet used for pushes (but may +be in the future). `GIT_OPTIONAL_LOCKS`:: If set to `0`, Git will complete any requested operation without diff --git a/Documentation/gitfaq.txt b/Documentation/gitfaq.txt index afdaeab850..8c1f2d5675 100644 --- a/Documentation/gitfaq.txt +++ b/Documentation/gitfaq.txt @@ -275,7 +275,7 @@ best to always use a regular merge commit. [[merge-two-revert-one]] If I make a change on two branches but revert it on one, why does the merge of those branches include the change?:: - By default, when Git does a merge, it uses a strategy called the recursive + By default, when Git does a merge, it uses a strategy called the `ort` strategy, which does a fancy three-way merge. In such a case, when Git performs the merge, it considers exactly three points: the two heads and a third point, called the _merge base_, which is usually the common ancestor of diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 52565014c1..61ec157c2f 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -2,6 +2,9 @@ --no-commit:: Perform the merge and commit the result. This option can be used to override --no-commit. +ifdef::git-pull[] + Only useful when merging. +endif::git-pull[] + With --no-commit perform the merge and stop just before creating a merge commit, to give the user a chance to inspect and further @@ -39,6 +42,7 @@ set to `no` at the beginning of them. to `MERGE_MSG` before being passed on to the commit machinery in the case of a merge conflict. +ifdef::git-merge[] --ff:: --no-ff:: --ff-only:: @@ -47,6 +51,22 @@ set to `no` at the beginning of them. default unless merging an annotated (and possibly signed) tag that is not stored in its natural place in the `refs/tags/` hierarchy, in which case `--no-ff` is assumed. +endif::git-merge[] +ifdef::git-pull[] +--ff-only:: + Only update to the new history if there is no divergent local + history. This is the default when no method for reconciling + divergent histories is provided (via the --rebase=* flags). + +--ff:: +--no-ff:: + When merging rather than rebasing, specifies how a merge is + handled when the merged-in history is already a descendant of + the current history. If merging is requested, `--ff` is the + default unless merging an annotated (and possibly signed) tag + that is not stored in its natural place in the `refs/tags/` + hierarchy, in which case `--no-ff` is assumed. +endif::git-pull[] + With `--ff`, when possible resolve the merge as a fast-forward (only update the branch pointer to match the merged branch; do not create a @@ -55,9 +75,11 @@ descendant of the current history), create a merge commit. + With `--no-ff`, create a merge commit in all cases, even when the merge could instead be resolved as a fast-forward. +ifdef::git-merge[] + With `--ff-only`, resolve the merge as a fast-forward when possible. When not possible, refuse to merge and exit with a non-zero status. +endif::git-merge[] -S[<keyid>]:: --gpg-sign[=<keyid>]:: @@ -73,6 +95,9 @@ When not possible, refuse to merge and exit with a non-zero status. In addition to branch names, populate the log message with one-line descriptions from at most <n> actual commits that are being merged. See also linkgit:git-fmt-merge-msg[1]. +ifdef::git-pull[] + Only useful when merging. +endif::git-pull[] + With --no-log do not list one-line descriptions from the actual commits being merged. @@ -102,18 +127,25 @@ With --no-squash perform the merge and commit the result. This option can be used to override --squash. + With --squash, --commit is not allowed, and will fail. +ifdef::git-pull[] ++ +Only useful when merging. +endif::git-pull[] --no-verify:: This option bypasses the pre-merge and commit-msg hooks. See also linkgit:githooks[5]. +ifdef::git-pull[] + Only useful when merging. +endif::git-pull[] -s <strategy>:: --strategy=<strategy>:: Use the given merge strategy; can be supplied more than once to specify them in the order they should be tried. If there is no `-s` option, a built-in list of strategies - is used instead ('git merge-recursive' when merging a single - head, 'git merge-octopus' otherwise). + is used instead (`ort` when merging a single head, + `octopus` otherwise). -X <option>:: --strategy-option=<option>:: @@ -127,6 +159,10 @@ With --squash, --commit is not allowed, and will fail. default trust model, this means the signing key has been signed by a trusted key. If the tip commit of the side branch is not signed with a valid key, the merge is aborted. +ifdef::git-pull[] ++ +Only useful when merging. +endif::git-pull[] --summary:: --no-summary:: @@ -167,3 +203,7 @@ endif::git-pull[] projects that started their lives independently. As that is a very rare occasion, no configuration variable to enable this by default exists and will not be added. +ifdef::git-pull[] ++ +Only useful when merging. +endif::git-pull[] diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 2912de706b..5fc54ec060 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -6,28 +6,23 @@ backend 'merge strategies' to be chosen with `-s` option. Some strategies can also take their own options, which can be passed by giving `-X<option>` arguments to `git merge` and/or `git pull`. -resolve:: - This can only resolve two heads (i.e. the current branch - and another branch you pulled from) using a 3-way merge - algorithm. It tries to carefully detect criss-cross - merge ambiguities and is considered generally safe and - fast. - -recursive:: - This can only resolve two heads using a 3-way merge - algorithm. When there is more than one common - ancestor that can be used for 3-way merge, it creates a - merged tree of the common ancestors and uses that as - the reference tree for the 3-way merge. This has been - reported to result in fewer merge conflicts without - causing mismerges by tests done on actual merge commits - taken from Linux 2.6 kernel development history. - Additionally this can detect and handle merges involving - renames, but currently cannot make use of detected - copies. This is the default merge strategy when pulling - or merging one branch. +ort:: + This is the default merge strategy when pulling or merging one + branch. This strategy can only resolve two heads using a + 3-way merge algorithm. When there is more than one common + ancestor that can be used for 3-way merge, it creates a merged + tree of the common ancestors and uses that as the reference + tree for the 3-way merge. This has been reported to result in + fewer merge conflicts without causing mismerges by tests done + on actual merge commits taken from Linux 2.6 kernel + development history. Additionally this strategy can detect + and handle merges involving renames. It does not make use of + detected copies. The name for this algorithm is an acronym + ("Ostensibly Recursive's Twin") and came from the fact that it + was written as a replacement for the previous default + algorithm, `recursive`. + -The 'recursive' strategy can take the following options: +The 'ort' strategy can take the following options: ours;; This option forces conflicting hunks to be auto-resolved cleanly by @@ -43,19 +38,6 @@ theirs;; This is the opposite of 'ours'; note that, unlike 'ours', there is no 'theirs' merge strategy to confuse this merge option with. -patience;; - With this option, 'merge-recursive' spends a little extra time - to avoid mismerges that sometimes occur due to unimportant - matching lines (e.g., braces from distinct functions). Use - this when the branches to be merged have diverged wildly. - See also linkgit:git-diff[1] `--patience`. - -diff-algorithm=[patience|minimal|histogram|myers];; - Tells 'merge-recursive' to use a different diff algorithm, which - can help avoid mismerges that occur due to unimportant matching - lines (such as braces from distinct functions). See also - linkgit:git-diff[1] `--diff-algorithm`. - ignore-space-change;; ignore-all-space;; ignore-space-at-eol;; @@ -84,11 +66,6 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. -no-renames;; - Turn off rename detection. This overrides the `merge.renames` - configuration variable. - See also linkgit:git-diff[1] `--no-renames`. - find-renames[=<n>];; Turn on rename detection, optionally setting the similarity threshold. This is the default. This overrides the @@ -105,6 +82,46 @@ subtree[=<path>];; is prefixed (or stripped from the beginning) to make the shape of two trees to match. +recursive:: + This can only resolve two heads using a 3-way merge + algorithm. When there is more than one common + ancestor that can be used for 3-way merge, it creates a + merged tree of the common ancestors and uses that as + the reference tree for the 3-way merge. This has been + reported to result in fewer merge conflicts without + causing mismerges by tests done on actual merge commits + taken from Linux 2.6 kernel development history. + Additionally this can detect and handle merges involving + renames. It does not make use of detected copies. This was + the default strategy for resolving two heads from Git v0.99.9k + until v2.33.0. ++ +The 'recursive' strategy takes the same options as 'ort'. However, +there are three additional options that 'ort' ignores (not documented +above) that are potentially useful with the 'recursive' strategy: + +patience;; + Deprecated synonym for `diff-algorithm=patience`. + +diff-algorithm=[patience|minimal|histogram|myers];; + Use a different diff algorithm while merging, which can help + avoid mismerges that occur due to unimportant matching lines + (such as braces from distinct functions). See also + linkgit:git-diff[1] `--diff-algorithm`. Note that `ort` + specifically uses `diff-algorithm=histogram`, while `recursive` + defaults to the `diff.algorithm` config setting. + +no-renames;; + Turn off rename detection. This overrides the `merge.renames` + configuration variable. + See also linkgit:git-diff[1] `--no-renames`. + +resolve:: + This can only resolve two heads (i.e. the current branch + and another branch you pulled from) using a 3-way merge + algorithm. It tries to carefully detect criss-cross + merge ambiguities. It does not handle renames. + octopus:: This resolves cases with more than two heads, but refuses to do a complex merge that needs manual resolution. It is @@ -121,13 +138,13 @@ ours:: the 'recursive' merge strategy. subtree:: - This is a modified recursive strategy. When merging trees A and + This is a modified `ort` strategy. When merging trees A and B, if B corresponds to a subtree of A, B is first adjusted to match the tree structure of A, instead of reading the trees at the same level. This adjustment is also done to the common ancestor tree. -With the strategies that use 3-way merge (including the default, 'recursive'), +With the strategies that use 3-way merge (including the default, 'ort'), if a change is made on both branches, but later reverted on one of the branches, that change will be present in the merged result; some people find this behavior confusing. It occurs because only the heads and the merge base diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 27ddaf84a1..b3af850608 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -33,14 +33,16 @@ people using 80-column terminals. used together. --encoding=<encoding>:: - The commit objects record the encoding used for the log message + Commit objects record the character encoding used for the log message in their encoding header; this option can be used to tell the command to re-code the commit log message in the encoding preferred by the user. For non plumbing commands this defaults to UTF-8. Note that if an object claims to be encoded in `X` and we are outputting in `X`, we will output the object verbatim; this means that invalid sequences in the original - commit may be copied to the output. + commit may be copied to the output. Likewise, if iconv(3) fails + to convert the commit, we will output the original object + verbatim, along with a warning. --expand-tabs=<n>:: --expand-tabs:: diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 24569b06d1..b7bd27e171 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -968,6 +968,11 @@ list of the missing objects. Object IDs are prefixed with a ``?'' character. objects. endif::git-rev-list[] +--unsorted-input:: + Show commits in the order they were given on the command line instead + of sorting them in reverse chronological order by commit time. Cannot + be combined with `--no-walk` or `--no-walk=sorted`. + --no-walk[=(sorted|unsorted)]:: Only show the given commits, but do not traverse their ancestors. This has no effect if a range is specified. If the argument @@ -975,7 +980,8 @@ endif::git-rev-list[] given on the command line. Otherwise (if `sorted` or no argument was given), the commits are shown in reverse chronological order by commit time. - Cannot be combined with `--graph`. + Cannot be combined with `--graph`. Cannot be combined with + `--unsorted-input` if `sorted` or no argument was given. --do-walk:: Overrides a previous `--no-walk`. diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 5a60bbfa7f..acfd5dc1d8 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -198,11 +198,6 @@ There are some macros to easily define options: The filename will be prefixed by passing the filename along with the prefix argument of `parse_options()` to `prefix_filename()`. -`OPT_ARGUMENT(long, &int_var, description)`:: - Introduce a long-option argument that will be kept in `argv[]`. - If this option was seen, `int_var` will be set to one (except - if a `NULL` pointer was passed). - `OPT_NUMBER_CALLBACK(&var, description, func_ptr)`:: Recognize numerical options like -123 and feed the integer as if it was an argument to the function given by `func_ptr`. diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt index 037a91cbca..ef7fe02a8f 100644 --- a/Documentation/technical/api-trace2.txt +++ b/Documentation/technical/api-trace2.txt @@ -493,6 +493,20 @@ about specific error arguments. } ------------ +`"cmd_ancestry"`:: + This event contains the text command name for the parent (and earlier + generations of parents) of the current process, in an array ordered from + nearest parent to furthest great-grandparent. It may not be implemented + on all platforms. ++ +------------ +{ + "event":"cmd_ancestry", + ... + "ancestry":["bash","tmux: server","systemd"] +} +------------ + `"cmd_name"`:: This event contains the command name for this git process and the hierarchy of commands from parent git processes. @@ -599,6 +613,46 @@ stopping after the waitpid() and includes OS process creation overhead). So this time will be slightly larger than the atexit time reported by the child process itself. +`"child_ready"`:: + This event is generated after the current process has started + a background process and released all handles to it. ++ +------------ +{ + "event":"child_ready", + ... + "child_id":2, + "pid":14708, # child PID + "ready":"ready", # child ready state + "t_rel":0.110605 # observed run-time of child process +} +------------ ++ +Note that the session-id of the child process is not available to +the current/spawning process, so the child's PID is reported here as +a hint for post-processing. (But it is only a hint because the child +process may be a shell script which doesn't have a session-id.) ++ +This event is generated after the child is started in the background +and given a little time to boot up and start working. If the child +startups normally and while the parent is still waiting, the "ready" +field will have the value "ready". +If the child is too slow to start and the parent times out, the field +will have the value "timeout". +If the child starts but the parent is unable to probe it, the field +will have the value "error". ++ +After the parent process emits this event, it will release all of its +handles to the child process and treat the child as a background +daemon. So even if the child does eventually finish booting up, +the parent will not emit an updated event. ++ +Note that the `t_rel` field contains the observed run time in seconds +when the parent released the child process into the background. +The child is assumed to be a long-running daemon process and may +outlive the parent process. So the parent's child event times should +not be compared to the child's atexit times. + `"exec"`:: This event is generated before git attempts to `exec()` another command rather than starting a child process. diff --git a/Documentation/technical/bitmap-format.txt b/Documentation/technical/bitmap-format.txt index f8c18a0f7a..04b3ec2178 100644 --- a/Documentation/technical/bitmap-format.txt +++ b/Documentation/technical/bitmap-format.txt @@ -1,6 +1,44 @@ GIT bitmap v1 format ==================== +== Pack and multi-pack bitmaps + +Bitmaps store reachability information about the set of objects in a packfile, +or a multi-pack index (MIDX). The former is defined obviously, and the latter is +defined as the union of objects in packs contained in the MIDX. + +A bitmap may belong to either one pack, or the repository's multi-pack index (if +it exists). A repository may have at most one bitmap. + +An object is uniquely described by its bit position within a bitmap: + + - If the bitmap belongs to a packfile, the __n__th bit corresponds to + the __n__th object in pack order. For a function `offset` which maps + objects to their byte offset within a pack, pack order is defined as + follows: + + o1 <= o2 <==> offset(o1) <= offset(o2) + + - If the bitmap belongs to a MIDX, the __n__th bit corresponds to the + __n__th object in MIDX order. With an additional function `pack` which + maps objects to the pack they were selected from by the MIDX, MIDX order + is defined as follows: + + o1 <= o2 <==> pack(o1) <= pack(o2) /\ offset(o1) <= offset(o2) + + The ordering between packs is done according to the MIDX's .rev file. + Notably, the preferred pack sorts ahead of all other packs. + +The on-disk representation (described below) of a bitmap is the same regardless +of whether or not that bitmap belongs to a packfile or a MIDX. The only +difference is the interpretation of the bits, which is described above. + +Certain bitmap extensions are supported (see: Appendix B). No extensions are +required for bitmaps corresponding to packfiles. For bitmaps that correspond to +MIDXs, both the bit-cache and rev-cache extensions are required. + +== On-disk format + - A header appears at the beginning: 4-byte signature: {'B', 'I', 'T', 'M'} @@ -14,17 +52,19 @@ GIT bitmap v1 format The following flags are supported: - BITMAP_OPT_FULL_DAG (0x1) REQUIRED - This flag must always be present. It implies that the bitmap - index has been generated for a packfile with full closure - (i.e. where every single object in the packfile can find - its parent links inside the same packfile). This is a - requirement for the bitmap index format, also present in JGit, - that greatly reduces the complexity of the implementation. + This flag must always be present. It implies that the + bitmap index has been generated for a packfile or + multi-pack index (MIDX) with full closure (i.e. where + every single object in the packfile/MIDX can find its + parent links inside the same packfile/MIDX). This is a + requirement for the bitmap index format, also present in + JGit, that greatly reduces the complexity of the + implementation. - BITMAP_OPT_HASH_CACHE (0x4) If present, the end of the bitmap file contains `N` 32-bit name-hash values, one per object in the - pack. The format and meaning of the name-hash is + pack/MIDX. The format and meaning of the name-hash is described below. 4-byte entry count (network byte order) @@ -33,7 +73,8 @@ GIT bitmap v1 format 20-byte checksum - The SHA1 checksum of the pack this bitmap index belongs to. + The SHA1 checksum of the pack/MIDX this bitmap index + belongs to. - 4 EWAH bitmaps that act as type indexes @@ -50,7 +91,7 @@ GIT bitmap v1 format - Tags In each bitmap, the `n`th bit is set to true if the `n`th object - in the packfile is of that type. + in the packfile or multi-pack index is of that type. The obvious consequence is that the OR of all 4 bitmaps will result in a full set (all bits set), and the AND of all 4 bitmaps will @@ -62,8 +103,9 @@ GIT bitmap v1 format Each entry contains the following: - 4-byte object position (network byte order) - The position **in the index for the packfile** where the - bitmap for this commit is found. + The position **in the index for the packfile or + multi-pack index** where the bitmap for this commit is + found. - 1-byte XOR-offset The xor offset used to compress this bitmap. For an entry @@ -146,10 +188,11 @@ Name-hash cache --------------- If the BITMAP_OPT_HASH_CACHE flag is set, the end of the bitmap contains -a cache of 32-bit values, one per object in the pack. The value at +a cache of 32-bit values, one per object in the pack/MIDX. The value at position `i` is the hash of the pathname at which the `i`th object -(counting in index order) in the pack can be found. This can be fed -into the delta heuristics to compare objects with similar pathnames. +(counting in index or multi-pack index order) in the pack/MIDX can be found. +This can be fed into the delta heuristics to compare objects with similar +pathnames. The hash algorithm used is: diff --git a/Documentation/technical/directory-rename-detection.txt b/Documentation/technical/directory-rename-detection.txt index 49b83ef3cc..029ee2cedc 100644 --- a/Documentation/technical/directory-rename-detection.txt +++ b/Documentation/technical/directory-rename-detection.txt @@ -2,9 +2,9 @@ Directory rename detection ========================== Rename detection logic in diffcore-rename that checks for renames of -individual files is aggregated and analyzed in merge-recursive for cases -where combinations of renames indicate that a full directory has been -renamed. +individual files is also aggregated there and then analyzed in either +merge-ort or merge-recursive for cases where combinations of renames +indicate that a full directory has been renamed. Scope of abilities ------------------ @@ -88,9 +88,11 @@ directory rename detection support in: Folks have requested in the past that `git diff` detect directory renames and somehow simplify its output. It is not clear whether this would be desirable or how the output should be simplified, so this was - simply not implemented. Further, to implement this, directory rename - detection logic would need to move from merge-recursive to - diffcore-rename. + simply not implemented. Also, while diffcore-rename has most of the + logic for detecting directory renames, some of the logic is still found + within merge-ort and merge-recursive. Fully supporting directory + rename detection in diffs would require copying or moving the remaining + bits of logic to the diff machinery. * am diff --git a/Documentation/technical/http-protocol.txt b/Documentation/technical/http-protocol.txt index 96d89ea9b2..cc5126cfed 100644 --- a/Documentation/technical/http-protocol.txt +++ b/Documentation/technical/http-protocol.txt @@ -225,6 +225,9 @@ The client may send Extra Parameters (see Documentation/technical/pack-protocol.txt) as a colon-separated string in the Git-Protocol HTTP header. +Uses the `--http-backend-info-refs` option to +linkgit:git-upload-pack[1]. + Dumb Server Response ^^^^^^^^^^^^^^^^^^^^ Dumb servers MUST respond with the dumb server reply format. diff --git a/Documentation/technical/multi-pack-index.txt b/Documentation/technical/multi-pack-index.txt index fb688976c4..86f40f2490 100644 --- a/Documentation/technical/multi-pack-index.txt +++ b/Documentation/technical/multi-pack-index.txt @@ -36,7 +36,9 @@ Design Details directory of an alternate. It refers only to packfiles in that same directory. -- The core.multiPackIndex config setting must be on to consume MIDX files. +- The core.multiPackIndex config setting must be on (which is the + default) to consume MIDX files. Setting it to `false` prevents + Git from reading a MIDX file, even if one exists. - The file format includes parameters for the object ID hash function, so a future change of hash algorithm does not require @@ -71,14 +73,10 @@ Future Work still reducing the number of binary searches required for object lookups. -- The reachability bitmap is currently paired directly with a single - packfile, using the pack-order as the object order to hopefully - compress the bitmaps well using run-length encoding. This could be - extended to pair a reachability bitmap with a multi-pack-index. If - the multi-pack-index is extended to store a "stable object order" +- If the multi-pack-index is extended to store a "stable object order" (a function Order(hash) = integer that is constant for a given hash, - even as the multi-pack-index is updated) then a reachability bitmap - could point to a multi-pack-index and be updated independently. + even as the multi-pack-index is updated) then MIDX bitmaps could be + updated independently of the MIDX. - Packfiles can be marked as "special" using empty files that share the initial name but replace ".pack" with ".keep" or ".promisor". diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt index 1040d85319..21e8258ccf 100644 --- a/Documentation/technical/protocol-v2.txt +++ b/Documentation/technical/protocol-v2.txt @@ -42,7 +42,8 @@ Initial Client Request In general a client can request to speak protocol v2 by sending `version=2` through the respective side-channel for the transport being used which inevitably sets `GIT_PROTOCOL`. More information can be -found in `pack-protocol.txt` and `http-protocol.txt`. In all cases the +found in `pack-protocol.txt` and `http-protocol.txt`, as well as the +`GIT_PROTOCOL` definition in `git.txt`. In all cases the response from the server is the capability advertisement. Git Transport @@ -58,6 +59,8 @@ SSH and File Transport When using either the ssh:// or file:// transport, the GIT_PROTOCOL environment variable must be set explicitly to include "version=2". +The server may need to be configured to allow this environment variable +to pass. HTTP Transport ~~~~~~~~~~~~~~ @@ -81,6 +84,12 @@ A v2 server would reply: Subsequent requests are then made directly to the service `$GIT_URL/git-upload-pack`. (This works the same for git-receive-pack). +Uses the `--http-backend-info-refs` option to +linkgit:git-upload-pack[1]. + +The server may need to be configured to pass this header's contents via +the `GIT_PROTOCOL` variable. See the discussion in `git-http-backend.txt`. + Capability Advertisement ------------------------ @@ -190,7 +199,11 @@ ls-refs takes in the following arguments: Show peeled tags. ref-prefix <prefix> When specified, only references having a prefix matching one of - the provided prefixes are displayed. + the provided prefixes are displayed. Multiple instances may be + given, in which case references matching any prefix will be + shown. Note that this is purely for optimization; a server MAY + show refs not matching the prefix if it chooses, and clients + should filter the result themselves. If the 'unborn' feature is advertised the following argument can be included in the client's request. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 96240598e3..865074bed4 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -3190,7 +3190,7 @@ that *updated* thing--the old state that you added originally ends up not being pointed to by any commit or tree, so it's now a dangling blob object. -Similarly, when the "recursive" merge strategy runs, and finds that +Similarly, when the "ort" merge strategy runs, and finds that there are criss-cross merges and thus more than one merge base (which is fairly unusual, but it does happen), it will generate one temporary midway tree (or possibly even more, if you had lots of criss-crossing |