diff options
Diffstat (limited to 'Documentation')
57 files changed, 1762 insertions, 376 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index 559d5f9ebf..a600e35c81 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -145,6 +145,14 @@ For C programs: they were describing changes. Often splitting a function into two makes the intention of the code much clearer. + - Multi-line comments include their delimiters on separate lines from + the text. E.g. + + /* + * A very long + * multi-line comment. + */ + - Double negation is often harder to understand than no negation at all. @@ -242,6 +250,14 @@ Writing Documentation: processed into HTML and manpages (e.g. git.html and git.1 in the same directory). + The documentation liberally mixes US and UK English (en_US/UK) + norms for spelling and grammar, which is somewhat unfortunate. + In an ideal world, it would have been better if it consistently + used only one and not the other, and we would have picked en_US + (if you wish to correct the English of some of the existing + documentation, please see the documentation-related advice in the + Documentation/SubmittingPatches file). + Every user-visible change should be reflected in the documentation. The same general rule as for code applies -- imitate the existing conventions. A few commented examples follow to provide reference diff --git a/Documentation/Makefile b/Documentation/Makefile index 0cfdc36b44..4f13a23893 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -103,6 +103,7 @@ MAKEINFO = makeinfo INSTALL_INFO = install-info DOCBOOK2X_TEXI = docbook2x-texi DBLATEX = dblatex +ASCIIDOC_DBLATEX_DIR = /etc/asciidoc/dblatex ifndef PERL_PATH PERL_PATH = /usr/bin/perl endif @@ -354,7 +355,7 @@ user-manual.texi: user-manual.xml user-manual.pdf: user-manual.xml $(QUIET_DBLATEX)$(RM) $@+ $@ && \ - $(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< && \ + $(DBLATEX) -o $@+ -p $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.xsl -s $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.sty $< && \ mv $@+ $@ gitman.texi: $(MAN_XML) cat-texi.perl diff --git a/Documentation/RelNotes/1.7.11.2.txt b/Documentation/RelNotes/1.7.11.2.txt index a0d24d1270..f0cfd02d6f 100644 --- a/Documentation/RelNotes/1.7.11.2.txt +++ b/Documentation/RelNotes/1.7.11.2.txt @@ -31,7 +31,7 @@ Fixes since v1.7.11.1 * "git diff --no-index" did not work with pagers correctly. * "git diff COPYING HEAD:COPYING" gave a nonsense error message that - claimed that the treeish HEAD did not have COPYING in it. + claimed that the tree-ish HEAD did not have COPYING in it. * When "git log" gets "--simplify-merges/by-decoration" together with "--first-parent", the combination of these options makes the diff --git a/Documentation/RelNotes/1.8.5.txt b/Documentation/RelNotes/1.8.5.txt new file mode 100644 index 0000000000..b1fc30fef4 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.txt @@ -0,0 +1,371 @@ +Git v1.8.5 Release Notes +======================== + +Backward compatibility notes (for Git 2.0) +------------------------------------------ + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics that pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +Use the user preference configuration variable "push.default" to +change this. If you are an old-timer who is used to the "matching" +semantics, you can set the variable to "matching" to keep the +traditional behaviour. If you want to live in the future early, you +can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + +The default prefix for "git svn" will change in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it will place them under refs/remotes/origin/ unless +it is told otherwise with its --prefix option. + + +Updates since v1.8.4 +-------------------- + +Foreign interfaces, subsystems and ports. + + * "git-svn" used with SVN 1.8.0 when talking over https:// connection + dumped core due to a bug in the serf library that SVN uses. Work + it around on our side, even though the SVN side is being fixed. + + * On MacOS X, we detected if the filesystem needs the "pre-composed + unicode strings" workaround, but did not automatically enable it. + Now we do. + + * remote-hg remote helper misbehaved when interacting with a local Hg + repository relative to the home directory, e.g. "clone hg::~/there". + + * imap-send ported to OS X uses Apple's security framework instead of + OpenSSL one. + + * Subversion 1.8.0 that was recently released breaks older subversion + clients coming over http/https in various ways. + + * "git fast-import" treats an empty path given to "ls" as the root of + the tree. + + +UI, Workflows & Features + + * "git replace" helper no longer allows an object to be replaced with + another object of a different type to avoid confusion (you can + still manually craft such replacement using "git update-ref", as an + escape hatch). + + * "git status" no longer prints dirty status information for + submodules for which submodule.$name.ignore is set to "all". + + * "git rebase -i" honours core.abbrev when preparing the insn sheet + for editing. + + * "git status" during a cherry-pick shows what original commit is + being picked. + + * Instead of typing four capital letters "HEAD", you can say "@" now, + e.g. "git log @". + + * "git check-ignore" follows the same rule as "git add" and "git + status" in that the ignore/exclude mechanism does not take effect + on paths that are already tracked. With "--no-index" option, it + can be used to diagnose which paths that should have been ignored + have been mistakenly added to the index. + + * Some irrelevant "advice" messages that are shared with "git status" + output have been removed from the commit log template. + + * "update-refs" learnt a "--stdin" option to read multiple update + requests and perform them in an all-or-none fashion. + + * Just like "make -C <directory>", "git -C <directory> ..." tells Git + to go there before doing anything else. + + * Just like "git checkout -" knows to check out and "git merge -" + knows to merge the branch you were previously on, "git cherry-pick" + now understands "git cherry-pick -" to pick from the previous + branch. + + * "git status" now omits the prefix to make its output a comment in a + commit log editor, which is not necessary for human consumption. + Scripts that parse the output of "git status" are advised to use + "git status --porcelain" instead, as its format is stable and easier + to parse. + + * Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if + "foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be + a more convenient way to say "test $(git cat-file -t v1.0) = tag". + + * "git branch -v -v" (and "git status") did not distinguish among a + branch that does not build on any other branch, a branch that is in + sync with the branch it builds on, and a branch that is configured + to build on some other branch that no longer exists. + + * A packfile that stores the same object more than once is broken and + will be rejected by "git index-pack" that is run when receiving + data over the wire. + + * Earlier we started rejecting an attempt to add 0{40} object name to + the index and to tree objects, but it sometimes is necessary to + allow so to be able to use tools like filter-branch to correct such + broken tree objects. "filter-branch" can again be used to to do + so. + + * "git config" did not provide a way to set or access numbers larger + than a native "int" on the platform; it now provides 64-bit signed + integers on all platforms. + + * "git pull --rebase" always chose to do the bog-standard flattening + rebase. You can tell it to run "rebase --preserve-merges" by + setting "pull.rebase" configuration to "preserve". + + * "git push --no-thin" actually disables the "thin pack transfer" + optimization. + + * Magic pathspecs like ":(icase)makefile" that matches both + Makefile and makefile can be used in more places. + + * The "http.*" variables can now be specified per URL that the + configuration applies. For example, + + [http] + sslVerify = true + [http "https://weak.example.com/"] + sslVerify = false + + would flip http.sslVerify off only when talking to that specified + site. + + * "git mv A B" when moving a submodule A has been taught to + relocate its working tree and to adjust the paths in the + .gitmodules file. + + * "git blame" can now take more than one -L option to discover the + origin of multiple blocks of the lines. + + * The http transport clients can optionally ask to save cookies + with http.savecookies configuration variable. + + * "git push" learned a more fine grained control over a blunt + "--force" when requesting a non-fast-forward update with the + "--force-with-lease=<refname>:<expected object name>" option. + + * "git diff --diff-filter=<classes of changes>" can now take + lowercase letters (e.g. "--diff-filter=d") to mean "show + everything but these classes". "git diff-files -q" is now a + deprecated synonym for "git diff-files --diff-filter=d". + + * "git fetch" (hence "git pull" as well) learned to check + "fetch.prune" and "remote.*.prune" configuration variables and + to behave as if the "--prune" command line option was given. + + * "git check-ignore -z" applied the NUL termination to both its input + (with --stdin) and its output, but "git check-attr -z" ignored the + option on the output side. Make both honor -z on the input and + output side the same way. + + * "git whatchanged" may still be used by old timers, but mention of + it in documents meant for new users will only waste readers' time + wonderig what the difference is between it and "git log". Make it + less prominent in the general part of the documentation and explain + that it is merely a "git log" with different default behaviour in + its own document. + + +Performance, Internal Implementation, etc. + + * Build procedure for MSVC has been updated. + + * If a build-time fallback is set to "cat" instead of "less", we + should apply the same "no subprocess or pipe" optimization as we + apply to user-supplied GIT_PAGER=cat. + + * Many commands use --dashed-option as a operation mode selector + (e.g. "git tag --delete") that the user can use at most one + (e.g. "git tag --delete --verify" is a nonsense) and you cannot + negate (e.g. "git tag --no-delete" is a nonsense). parse-options + API learned a new OPT_CMDMODE macro to make it easier to implement + such a set of options. + + * OPT_BOOLEAN() in parse-options API was misdesigned to be "counting + up" but many subcommands expect it to behave as "on/off". Update + them to use OPT_BOOL() which is a proper boolean. + + * "git gc" exits early without doing a double-work when it detects + that another instance of itself is already running. + + * Under memory pressure and/or file descriptor pressure, we used to + close pack windows that are not used and also closed filehandle to + an open but unused packfiles. These are now controlled separately + to better cope with the load. + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.4 +------------------ + +Unless otherwise noted, all the fixes since v1.8.4 in the maintenance +track are contained in this release (see release notes to them for +details). + + * "git shortlog" used to choke and die when there is a malformed + commit (e.g. missing authors); it now simply ignore such a commit + and keeps going. + (merge cd4f09e jk/shortlog-tolerate-broken-commit later to maint). + + * "git merge-recursive" did not parse its "--diff-algorithm=" command + line option correctly. + (merge 6562928 jk/diff-algo later to maint). + + * When running "fetch -q", a long silence while the sender side + computes the set of objects to send can be mistaken by proxies as + dropped connection. The server side has been taught to send a + small empty messages to keep the connection alive. + (merge 115dedd jk/upload-pack-keepalive later to maint). + + * "git rebase" had a portability regression in v1.8.4 to trigger a + bug in some BSD shell implementations. + (merge 99855dd mm/rebase-continue-freebsd-WB later to maint). + + * "git branch --track" had a minor regression in v1.8.3.2 and later + that made it impossible to base your local work on anything but a + local branch of the upstream repository you are tracking from. + (merge b0f49ff jh/checkout-auto-tracking later to maint). + + * When the webserver responds with "405 Method Not Allowed", "git + http-backend" should tell the client what methods are allowed with + the "Allow" header. + (merge 9247be0 bc/http-backend-allow-405 later to maint). + + * When there is no sufficient overlap between old and new history + during a "git fetch" into a shallow repository, objects that the + sending side knows the receiving end has were unnecessarily sent. + (merge f21d2a7 nd/fetch-into-shallow later to maint). + + * "git cvsserver" computed the permission mode bits incorrectly for + executable files. + (merge 1b48d56 jc/cvsserver-perm-bit-fix later to maint). + + * When send-email comes up with an error message to die with upon + failure to start an SSL session, it tried to read the error string + from a wrong place. + (merge 6cb0c88 bc/send-email-ssl-die-message-fix later to maint). + + * The implementation of "add -i" has a crippling code to work around + ActiveState Perl limitation but it by mistake also triggered on Git + for Windows where MSYS perl is used. + (merge df17e77 js/add-i-mingw later to maint). + + * We made sure that we notice the user-supplied GIT_DIR is actually a + gitfile, but did not do the same when the default ".git" is a + gitfile. + (merge 487a2b7 nd/git-dir-pointing-at-gitfile later to maint). + + * When an object is not found after checking the packfiles and then + loose object directory, read_sha1_file() re-checks the packfiles to + prevent racing with a concurrent repacker; teach the same logic to + has_sha1_file(). + (merge 45e8a74 jk/has-sha1-file-retry-packed later to maint). + + * "git commit --author=$name", when $name is not in the canonical + "A. U. Thor <au.thor@example.xz>" format, looks for a matching name + from existing history, but did not consult mailmap to grab the + preferred author name. + (merge ea16794 ap/commit-author-mailmap later to maint). + + * "git ls-files -k" needs to crawl only the part of the working tree + that may overlap the paths in the index to find killed files, but + shared code with the logic to find all the untracked files, which + made it unnecessarily inefficient. + (merge 680be04 jc/ls-files-killed-optim later to maint). + + * The commit object names in the insn sheet that was prepared at the + beginning of "rebase -i" session can become ambiguous as the + rebasing progresses and the repository gains more commits. Make + sure the internal record is kept with full 40-hex object names. + (merge 75c6976 es/rebase-i-no-abbrev later to maint). + + * "git rebase --preserve-merges" internally used the merge machinery + and as a side effect, left merge summary message in the log, but + when rebasing, there should not be a need for merge summary. + (merge a9f739c rt/rebase-p-no-merge-summary later to maint). + + * A call to xread() was used without a loop around to cope with short + read in the codepath to stream new contents to a pack. + (merge e92527c js/xread-in-full later to maint). + + * "git rebase -i" forgot that the comment character can be + configurable while reading its insn sheet. + (merge 7bca7af es/rebase-i-respect-core-commentchar later to maint). + + * The mailmap support code read past the allocated buffer when the + mailmap file ended with an incomplete line. + (merge f972a16 jk/mailmap-incomplete-line later to maint). + + * We used to send a large request to read(2)/write(2) as a single + system call, which was bad from the latency point of view when + the operation needs to be killed, and also triggered an error on + broken 64-bit systems that refuse to take more than 2GB read or + write in one go. + (merge a487916 sp/clip-read-write-to-8mb later to maint). + + * "git fetch" that auto-followed tags incorrectly reused the + connection with Git-aware transport helper (like the sample "ext::" + helper shipped with Git). + (merge 0f73f8b jc/transport-do-not-use-connect-twice-in-fetch later to maint). + + * "git log --full-diff -- <pathspec>" showed a huge diff for paths + outside the given <pathspec> for each commit, instead of showing + the change relative to the parent of the commit. "git reflog -p" + had a similar problem. + (merge 838f9a1 tr/log-full-diff-keep-true-parents later to maint). + + * Setting submodule.*.path configuration variable to true (without + giving "= value") caused Git to segfault. + (merge 4b05440 jl/some-submodule-config-are-not-boolean later to maint). + + * "git rebase -i" (there could be others, as the root cause is pretty + generic) fed a random, data dependeant string to 'echo' and + expects it to come out literally, corrupting its error message. + (merge 89b0230 mm/no-shell-escape-in-die-message later to maint). + + * Some people still use rather old versions of bash, which cannot + grok some constructs like 'printf -v varname' the prompt and + completion code started to use recently. + (merge a44aa69 bc/completion-for-bash-3.0 later to maint). + + * Code to read configuration from a blob object did not compile on + platforms with fgetc() etc. implemented as macros. + (merge 49d6cfa hv/config-from-blob later to maint-1.8.3). + + * The recent "short-cut clone connectivity check" topic broke a + shallow repository when a fetch operation tries to auto-follow tags. + (merge 6da8bdc nd/fetch-pack-shallow-fix later to maint-1.8.3). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index d0a4733e45..705557689d 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -65,7 +65,20 @@ feature does not trigger when it shouldn't. Also make sure that the test suite passes after your commit. Do not forget to update the documentation to describe the updated behaviour. -Oh, another thing. I am picky about whitespaces. Make sure your +Speaking of the documentation, it is currently a liberal mixture of US +and UK English norms for spelling and grammar, which is somewhat +unfortunate. A huge patch that touches the files all over the place +only to correct the inconsistency is not welcome, though. Potential +clashes with other changes that can result from such a patch are not +worth it. We prefer to gradually reconcile the inconsistencies in +favor of US English, with small and easily digestible patches, as a +side effect of doing some other real work in the vicinity (e.g. +rewriting a paragraph for clarity, while turning en_UK spelling to +en_US). Obvious typographical fixes are much more welcomed ("teh -> +"the"), preferably submitted as independent patches separate from +other documentation changes. + +Oh, another thing. We are picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped in templates/hooks--pre-commit. To help ensure this does not happen, run git diff --check on your changes before you commit. diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 4e55b1564e..0cebc4f692 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -11,12 +11,12 @@ -L <start>,<end>:: -L :<regex>:: - Annotate only the given line range. <start> and <end> are optional. - ``-L <start>'' or ``-L <start>,'' spans from <start> to end of file. - ``-L ,<end>'' spans from start of file to <end>. + Annotate only the given line range. May be specified multiple times. + Overlapping ranges are allowed. ++ +<start> and <end> are optional. ``-L <start>'' or ``-L <start>,'' spans from +<start> to end of file. ``-L ,<end>'' spans from start of file to <end>. + -<start> and <end> can take one of these forms: - include::line-range-format.txt[] -l:: diff --git a/Documentation/config.txt b/Documentation/config.txt index 6b35578711..d4d93c9732 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -170,8 +170,8 @@ advice.*:: pushNeedsForce:: Shown when linkgit:git-push[1] rejects an update that tries to overwrite a remote ref that points at an - object that is not a committish, or make the remote - ref point at an object that is not a committish. + object that is not a commit-ish, or make the remote + ref point at an object that is not a commit-ish. statusHints:: Show directions on how to proceed from the current state in the output of linkgit:git-status[1], in @@ -553,22 +553,20 @@ sequence.editor:: When not configured the default commit message editor is used instead. core.pager:: - The command that Git will use to paginate output. Can - be overridden with the `GIT_PAGER` environment - variable. Note that Git sets the `LESS` environment - variable to `FRSX` if it is unset when it runs the - pager. One can change these settings by setting the - `LESS` variable to some other value. Alternately, - these settings can be overridden on a project or - global basis by setting the `core.pager` option. - Setting `core.pager` has no effect on the `LESS` - environment variable behaviour above, so if you want - to override Git's default settings this way, you need - to be explicit. For example, to disable the S option - in a backward compatible manner, set `core.pager` - to `less -+S`. This will be passed to the shell by - Git, which will translate the final command to - `LESS=FRSX less -+S`. + Text viewer for use by Git commands (e.g., 'less'). The value + is meant to be interpreted by the shell. The order of preference + is the `$GIT_PAGER` environment variable, then `core.pager` + configuration, then `$PAGER`, and then the default chosen at + compile time (usually 'less'). ++ +When the `LESS` environment variable is unset, Git sets it to `FRSX` +(if `LESS` environment variable is set, Git does not change it at +all). If you want to selectively override Git's default setting +for `LESS`, you can set `core.pager` to e.g. `less -+S`. This will +be passed to the shell by Git, which will translate the final +command to `LESS=FRSX less -+S`. The environment tells the command +to set the `S` option to chop long lines but the command line +resets it to the default to fold long lines. core.whitespace:: A comma separated list of common whitespace problems to @@ -766,6 +764,10 @@ branch.<name>.rebase:: "git pull" is run. See "pull.rebase" for doing this in a non branch-specific manner. + + When preserve, also pass `--preserve-merges` along to 'git rebase' + so that locally committed merge commits will not be flattened + by running 'git pull'. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -787,8 +789,8 @@ browser.<tool>.path:: working repository in gitweb (see linkgit:git-instaweb[1]). clean.requireForce:: - A boolean to make git-clean do nothing unless given -f - or -n. Defaults to true. + A boolean to make git-clean do nothing unless given -f, + -i or -n. Defaults to true. color.branch:: A boolean to enable/disable color in the output of @@ -1061,6 +1063,10 @@ fetch.unpackLimit:: especially on slow filesystems. If not set, the value of `transfer.unpackLimit` is used instead. +fetch.prune:: + If true, fetch will automatically behave as if the `--prune` + option was given on the command line. See also `remote.<name>.prune`. + format.attach:: Enable multipart/mixed attachments as the default for 'format-patch'. The value can also be a double quoted string @@ -1445,7 +1451,11 @@ http.cookiefile:: of the file to read cookies from should be plain HTTP headers or the Netscape/Mozilla cookie file format (see linkgit:curl[1]). NOTE that the file specified with http.cookiefile is only used as - input. No cookies will be stored in the file. + input unless http.saveCookies is set. + +http.savecookies:: + If set, store cookies received during requests to the file specified by + http.cookiefile. Has no effect if http.cookiefile is unset. http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing @@ -1525,6 +1535,51 @@ http.useragent:: of common USER_AGENT strings (but not including those like git/1.7.1). Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. +http.<url>.*:: + Any of the http.* options above can be applied selectively to some urls. + For a config key to match a URL, each element of the config key is + compared to that of the URL, in the following order: ++ +-- +. Scheme (e.g., `https` in `https://example.com/`). This field + must match exactly between the config key and the URL. + +. Host/domain name (e.g., `example.com` in `https://example.com/`). + This field must match exactly between the config key and the URL. + +. Port number (e.g., `8080` in `http://example.com:8080/`). + This field must match exactly between the config key and the URL. + Omitted port numbers are automatically converted to the correct + default for the scheme before matching. + +. Path (e.g., `repo.git` in `https://example.com/repo.git`). The + path field of the config key must match the path field of the URL + either exactly or as a prefix of slash-delimited path elements. This means + a config key with path `foo/` matches URL path `foo/bar`. A prefix can only + match on a slash (`/`) boundary. Longer matches take precedence (so a config + key with path `foo/bar` is a better match to URL path `foo/bar` than a config + key with just path `foo/`). + +. User name (e.g., `user` in `https://user@example.com/repo.git`). If + the config key has a user name it must match the user name in the + URL exactly. If the config key does not have a user name, that + config key will match a URL with any user name (including none), + but at a lower precedence than a config key with a user name. +-- ++ +The list above is ordered by decreasing precedence; a URL that matches +a config key's path is preferred to one that matches its user name. For example, +if the URL is `https://user@example.com/foo/bar` a config key match of +`https://example.com/foo` will be preferred over a config key match of +`https://user@example.com`. ++ +All URLs are normalized before attempting any matching (the password part, +if embedded in the URL, is always ignored for matching purposes) so that +equivalent urls that are simply spelled differently will match properly. +Environment variable settings always override any matches. The urls that are +matched against are those given directly to Git commands. This means any URLs +visited as a result of a redirection do not participate in matching. + i18n.commitEncoding:: Character encoding the commit messages are stored in; Git itself does not care per se, but this information is necessary e.g. when @@ -1826,6 +1881,10 @@ pull.rebase:: pull" is run. See "branch.<name>.rebase" for setting this on a per-branch basis. + + When preserve, also pass `--preserve-merges` along to 'git rebase' + so that locally committed merge commits will not be flattened + by running 'git pull'. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -2024,6 +2083,12 @@ remote.<name>.vcs:: Setting this to a value <vcs> will cause Git to interact with the remote with the git-remote-<vcs> helper. +remote.<name>.prune:: + When set to true, fetching from this remote by default will also + remove any remote-tracking branches which no longer exist on the + remote (as if the `--prune` option was give on the command line). + Overrides `fetch.prune` settings, if any. + remotes.<group>:: The list of remotes which are fetched by "git remote update <group>". See linkgit:git-remote[1]. @@ -2118,6 +2183,13 @@ status.branch:: Set to true to enable --branch by default in linkgit:git-status[1]. The option --no-branch takes precedence over this variable. +status.displayCommentPrefix:: + If set to true, linkgit:git-status[1] will insert a comment + prefix before each output line (starting with + `core.commentChar`, i.e. `#` by default). This was the + behavior of linkgit:git-status[1] in Git 1.8.4 and previous. + Defaults to false. + status.showUntrackedFiles:: By default, linkgit:git-status[1] and linkgit:git-commit[1] show files which are not currently tracked by Git. Directories which @@ -2142,7 +2214,14 @@ status.submodulesummary:: If this is set to a non zero number or true (identical to -1 or an unlimited number), the submodule summary will be enabled and a summary of commits for modified submodules will be shown (see - --summary-limit option of linkgit:git-submodule[1]). + --summary-limit option of linkgit:git-submodule[1]). Please note + that the summary output command will be suppressed for all + submodules when `diff.ignoreSubmodules` is set to 'all' or only + for those submodules where `submodule.<name>.ignore=all`. To + also view the summary for ignored submodules you can either use + the --ignore-submodules=dirty command line option or the 'git + submodule summary' command, which shows a similar output but does + not honor these settings. submodule.<name>.path:: submodule.<name>.url:: @@ -2177,7 +2256,8 @@ submodule.<name>.ignore:: submodules that have untracked files in their work tree as changed. This setting overrides any setting made in .gitmodules for this submodule, both settings can be overridden on the command line by using the - "--ignore-submodules" option. + "--ignore-submodules" option. The 'git submodule' commands are not + affected by this setting. tar.umask:: This variable can be used to restrict the permission bits of @@ -2262,11 +2342,11 @@ user.name:: environment variables. See linkgit:git-commit-tree[1]. user.signingkey:: - If linkgit:git-tag[1] is not selecting the key you want it to - automatically when creating a signed tag, you can override the - default selection with this variable. This option is passed - unchanged to gpg's --local-user parameter, so you may specify a key - using any method that gpg supports. + If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the + key you want it to automatically when creating a signed tag or + commit, you can override the default selection with this variable. + This option is passed unchanged to gpg's --local-user parameter, + so you may specify a key using any method that gpg supports. web.browser:: Specify a web browser that may be used by some commands. diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index ac77050255..223b9310df 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -73,7 +73,11 @@ diff.ignoreSubmodules:: Sets the default value of --ignore-submodules. Note that this affects only 'git diff' Porcelain, and not lower level 'diff' commands such as 'git diff-files'. 'git checkout' also honors - this setting when reporting uncommitted changes. + this setting when reporting uncommitted changes. Setting it to + 'all' disables the submodule summary normally shown by 'git commit' + and 'git status' when 'status.submodulesummary' is set unless it is + overridden by using the --ignore-submodules command line option. + The 'git submodule' commands are not affected by this setting. diff.mnemonicprefix:: If set, 'git diff' uses a prefix pair that is different from the diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index e1fba85660..2a18c1f6f2 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -304,7 +304,7 @@ and maintain access to the repository by developers. * linkgit:git-shell[1] can be used as a 'restricted login shell' for shared central repository users. -link:howto/update-hook-example.txt[update hook howto] has a good +link:howto/update-hook-example.html[update hook howto] has a good example of managing a shared central repository. diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index 6cea7f1ce1..f2c85cc633 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] - [-L n,m | -L :fn] [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] + [-L <range>] [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file> DESCRIPTION @@ -18,7 +18,8 @@ DESCRIPTION Annotates each line in the given file with information from the revision which last modified the line. Optionally, start annotating from the given revision. -The command can also limit the range of lines annotated. +When specified one or more times, `-L` restricts annotation to the requested +lines. The origin of lines is automatically followed across whole-file renames (currently there is no option to turn the rename-following @@ -130,7 +131,10 @@ SPECIFYING RANGES Unlike 'git blame' and 'git annotate' in older versions of git, the extent of the annotation can be limited to both line ranges and revision -ranges. When you are interested in finding the origin for +ranges. The `-L` option, which limits annotation to a range of lines, may be +specified multiple times. + +When you are interested in finding the origin for lines 40-60 for file `foo`, you can use the `-L` option like so (they mean the same thing -- both ask for 21 lines starting at line 40): diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index b7cb625b89..311b33674e 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -48,7 +48,8 @@ working tree to it; use "git checkout <newbranch>" to switch to the new branch. When a local branch is started off a remote-tracking branch, Git sets up the -branch so that 'git pull' will appropriately merge from +branch (specifically the `branch.<name>.remote` and `branch.<name>.merge` +configuration entries) so that 'git pull' will appropriately merge from the remote-tracking branch. This behavior may be changed via the global `branch.autosetupmerge` configuration flag. That setting can be overridden by using the `--track` and `--no-track` options, and @@ -156,7 +157,8 @@ This option is only applicable in non-verbose mode. -t:: --track:: - When creating a new branch, set up configuration to mark the + When creating a new branch, set up `branch.<name>.remote` and + `branch.<name>.merge` configuration entries to mark the start-point branch as "upstream" from the new branch. This configuration will tell git to show the relationship between the two branches in `git status` and `git branch -v`. Furthermore, diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 10fbc6a373..322f5ed315 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -54,7 +54,7 @@ OPTIONS --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has be of the form <treeish>:<path>, or :<path> in order + <object> has be of the form <tree-ish>:<path>, or :<path> in order to apply the filter to the content recorded in the index at <path>. --batch:: @@ -86,10 +86,9 @@ BATCH OUTPUT ------------ If `--batch` or `--batch-check` is given, `cat-file` will read objects -from stdin, one per line, and print information about them. - -Each line is considered as a whole object name, and is parsed as if -given to linkgit:git-rev-parse[1]. +from stdin, one per line, and print information about them. By default, +the whole line is considered as an object, as if it were fed to +linkgit:git-rev-parse[1]. You can specify the information shown for each object by using a custom `<format>`. The `<format>` is copied literally to stdout for each @@ -110,6 +109,13 @@ newline. The available atoms are: The size, in bytes, that the object takes up on disk. See the note about on-disk sizes in the `CAVEATS` section below. +`rest`:: + If this atom is used in the output string, input lines are split + at the first whitespace boundary. All characters before that + whitespace are considered to be the object name; characters + after that first run of whitespace (i.e., the "rest" of the + line) are output in place of the `%(rest)` atom. + If no format is specified, the default format is `%(objectname) %(objecttype) %(objectsize)`. diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index a7be80d48b..00e2aa2df2 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -31,8 +31,9 @@ OPTIONS Read file names from stdin instead of from the command-line. -z:: - Only meaningful with `--stdin`; paths are separated with a - NUL character instead of a linefeed character. + The output format is modified to be machine-parseable. + If `--stdin` is also given, input paths are separated + with a NUL character instead of a linefeed character. \--:: Interpret all preceding arguments as attributes and all following @@ -48,6 +49,10 @@ OUTPUT The output is of the form: <path> COLON SP <attribute> COLON SP <info> LF +unless `-z` is in effect, in which case NUL is used as delimiter: +<path> NUL <attribute> NUL <info> NUL + + <path> is the path of a file being queried, <attribute> is an attribute being queried and <info> can be either: diff --git a/Documentation/git-check-ignore.txt b/Documentation/git-check-ignore.txt index d2df487aa2..ee2e091704 100644 --- a/Documentation/git-check-ignore.txt +++ b/Documentation/git-check-ignore.txt @@ -45,6 +45,13 @@ OPTIONS not be possible to distinguish between paths which match a pattern and those which don't. +--no-index:: + Don't look in the index when undertaking the checks. This can + be used to debug why a path became tracked by e.g. `git add .` + and was not ignored by the rules as expected by the user or when + developing patterns including negation to match a path previously + added with `git add -f`. + OUTPUT ------ diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index a49be1bab4..fc02959ba4 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -54,6 +54,8 @@ Git imposes the following rules on how references are named: . They cannot contain a sequence `@{`. +. They cannot be the single character `@`. + . They cannot contain a `\`. These rules make it easy for shell script based tools to parse diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index f6c19c734d..2d0daae626 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -14,8 +14,7 @@ DESCRIPTION ----------- The changeset (or "diff") of each commit between the fork-point and <head> is compared against each commit between the fork-point and <upstream>. -The commits are compared with their 'patch id', obtained from -the 'git patch-id' program. +The diffs are compared after removing any whitespace and line numbers. Every commit that doesn't exist in the <upstream> branch has its id (sha1) reported, prefixed by a symbol. The ones that have diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 2dbe486eb1..e9917b89a9 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -15,6 +15,7 @@ SYNOPSIS 'git config' [<file-option>] [type] [-z|--null] --get name [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get-all name [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get-regexp name_regex [value_regex] +'git config' [<file-option>] [type] [-z|--null] --get-urlmatch name URL 'git config' [<file-option>] --unset name [value_regex] 'git config' [<file-option>] --unset-all name [value_regex] 'git config' [<file-option>] --rename-section old_name new_name @@ -95,6 +96,14 @@ OPTIONS in which section and variable names are lowercased, but subsection names are not. +--get-urlmatch name URL:: + When given a two-part name section.key, the value for + section.<url>.key whose <url> part matches the best to the + given URL is returned (if no such key exists, the value for + section.key is used as a fallback). When given just the + section as name, do so for all the keys in the section and + list them. + --global:: For writing options: write to global `~/.gitconfig` file rather than the repository `.git/config`, write to @@ -295,6 +304,13 @@ Given a .git/config like this: gitproxy=proxy-command for kernel.org gitproxy=default-proxy ; for all the rest + ; HTTP + [http] + sslVerify + [http "https://weak.example.com"] + sslVerify = false + cookieFile = /tmp/cookie.txt + you can set the filemode to true with ------------ @@ -380,6 +396,19 @@ RESET=$(git config --get-color "" "reset") echo "${WS}your whitespace color or blue reverse${RESET}" ------------ +For URLs in `https://weak.example.com`, `http.sslVerify` is set to +false, while it is set to `true` for all others: + +------------ +% git config --bool --get-urlmatch http.sslverify https://good.example.com +true +% git config --bool --get-urlmatch http.sslverify https://weak.example.com +false +% git config --get-urlmatch http https://weak.example.com +http.cookiefile /tmp/cookie.txt +http.sslverify false +------------ + include::config.txt[] GIT diff --git a/Documentation/git-credential.txt b/Documentation/git-credential.txt index 7da0f13a5c..b211440373 100644 --- a/Documentation/git-credential.txt +++ b/Documentation/git-credential.txt @@ -20,7 +20,7 @@ usernames and passwords. The git-credential command exposes this interface to scripts which may want to retrieve, store, or prompt for credentials in the same manner as Git. The design of this scriptable interface models the internal C API; see -link:technical/api-credentials.txt[the Git credential API] for more +link:technical/api-credentials.html[the Git credential API] for more background on the concepts. git-credential takes an "action" option on the command-line (one of diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index 9439cd6d56..d20ca402a1 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -9,7 +9,7 @@ git-describe - Show the most recent tag that is reachable from a commit SYNOPSIS -------- [verse] -'git describe' [--all] [--tags] [--contains] [--abbrev=<n>] <committish>... +'git describe' [--all] [--tags] [--contains] [--abbrev=<n>] <commit-ish>... 'git describe' [--all] [--tags] [--contains] [--abbrev=<n>] --dirty[=<mark>] DESCRIPTION @@ -26,8 +26,8 @@ see the -a and -s options to linkgit:git-tag[1]. OPTIONS ------- -<committish>...:: - Committish object names to describe. +<commit-ish>...:: + Commit-ish object names to describe. --dirty[=<mark>]:: Describe the working tree. @@ -57,7 +57,7 @@ OPTIONS --candidates=<n>:: Instead of considering only the 10 most recent tags as - candidates to describe the input committish consider + candidates to describe the input commit-ish consider up to <n> candidates. Increasing <n> above 10 will take slightly longer but may produce a more accurate result. An <n> of 0 will cause only exact matches to be output. @@ -145,7 +145,7 @@ be sufficient to disambiguate these commits. SEARCH STRATEGY --------------- -For each committish supplied, 'git describe' will first look for +For each commit-ish supplied, 'git describe' will first look for a tag which tags exactly that commit. Annotated tags will always be preferred over lightweight tags, and tags with newer dates will always be preferred over tags with older dates. If an exact match @@ -154,12 +154,12 @@ is found, its name will be output and searching will stop. If an exact match was not found, 'git describe' will walk back through the commit history to locate an ancestor commit which has been tagged. The ancestor's tag will be output along with an -abbreviation of the input committish's SHA-1. If '--first-parent' was +abbreviation of the input commit-ish's SHA-1. If '--first-parent' was specified then the walk will only consider the first parent of each commit. If multiple tags were found during the walk then the tag which -has the fewest commits different from the input committish will be +has the fewest commits different from the input commit-ish will be selected and output. Here fewest commits different is defined as the number of commits which would be shown by `git log tag..input` will be the smallest number of commits possible. diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 78d6d50489..33fbd8c56f 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -28,10 +28,15 @@ two blob objects, or changes between two files on disk. words, the differences are what you _could_ tell Git to further add to the index but you still haven't. You can stage these changes by using linkgit:git-add[1]. -+ -If exactly two paths are given and at least one points outside -the current repository, 'git diff' will compare the two files / -directories. This behavior can be forced by --no-index. + +'git diff' --no-index [--options] [--] [<path>...]:: + + This form is to compare the given two paths on the + filesystem. You can omit the `--no-index` option when + running the command in a working tree controlled by Git and + at least one of the paths points outside the working tree, + or when running the command outside a working tree + controlled by Git. 'git diff' [--options] --cached [<commit>] [--] [<path>...]:: diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index bf1a02a80d..73f980638e 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -361,8 +361,8 @@ and control the current import process. More detailed discussion `--cat-blob-fd` or `stdout` if unspecified. `feature`:: - Require that fast-import supports the specified feature, or - abort if it does not. + Enable the specified feature. This requires that fast-import + supports the specified feature, and aborts if it does not. `option`:: Specify any of the options listed under OPTIONS that do not @@ -380,8 +380,8 @@ change to the project. ('author' (SP <name>)? SP LT <email> GT SP <when> LF)? 'committer' (SP <name>)? SP LT <email> GT SP <when> LF data - ('from' SP <committish> LF)? - ('merge' SP <committish> LF)? + ('from' SP <commit-ish> LF)? + ('merge' SP <commit-ish> LF)? (filemodify | filedelete | filecopy | filerename | filedeleteall | notemodify)* LF? .... @@ -460,9 +460,9 @@ as the current commit on that branch is automatically assumed to be the first ancestor of the new commit. As `LF` is not valid in a Git refname or SHA-1 expression, no -quoting or escaping syntax is supported within `<committish>`. +quoting or escaping syntax is supported within `<commit-ish>`. -Here `<committish>` is any of the following: +Here `<commit-ish>` is any of the following: * The name of an existing branch already in fast-import's internal branch table. If fast-import doesn't know the name, it's treated as a SHA-1 @@ -509,7 +509,7 @@ additional ancestors (forming a 16-way merge). For this reason it is suggested that frontends do not use more than 15 `merge` commands per commit; 16, if starting a new, empty branch. -Here `<committish>` is any of the commit specification expressions +Here `<commit-ish>` is any of the commit specification expressions also accepted by `from` (see above). `filemodify` @@ -677,8 +677,8 @@ paths for a commit are encouraged to do so. `notemodify` ^^^^^^^^^^^^ Included in a `commit` `<notes_ref>` command to add a new note -annotating a `<committish>` or change this annotation contents. -Internally it is similar to filemodify 100644 on `<committish>` +annotating a `<commit-ish>` or change this annotation contents. +Internally it is similar to filemodify 100644 on `<commit-ish>` path (maybe split into subdirectories). It's not advised to use any other commands to write to the `<notes_ref>` tree except `filedeleteall` to delete all existing notes in this tree. @@ -691,7 +691,7 @@ External data format:: commit that is to be annotated. + .... - 'N' SP <dataref> SP <committish> LF + 'N' SP <dataref> SP <commit-ish> LF .... + Here `<dataref>` can be either a mark reference (`:<idnum>`) @@ -704,13 +704,13 @@ Inline data format:: command. + .... - 'N' SP 'inline' SP <committish> LF + 'N' SP 'inline' SP <commit-ish> LF data .... + See below for a detailed description of the `data` command. -In both formats `<committish>` is any of the commit specification +In both formats `<commit-ish>` is any of the commit specification expressions also accepted by `from` (see above). `mark` @@ -741,7 +741,7 @@ lightweight (non-annotated) tags see the `reset` command below. .... 'tag' SP <name> LF - 'from' SP <committish> LF + 'from' SP <commit-ish> LF 'tagger' (SP <name>)? SP LT <email> GT SP <when> LF data .... @@ -786,11 +786,11 @@ branch from an existing commit without creating a new commit. .... 'reset' SP <ref> LF - ('from' SP <committish> LF)? + ('from' SP <commit-ish> LF)? LF? .... -For a detailed description of `<ref>` and `<committish>` see above +For a detailed description of `<ref>` and `<commit-ish>` see above under `commit` and `from`. The `LF` after the command is optional (it used to be required). diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 1e71754347..444b805d35 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -90,6 +90,10 @@ be in a separate packet, and the list must end with a flush packet. --no-progress:: Do not show the progress. +--check-self-contained-and-connected:: + Output "connectivity-ok" if the received pack is + self-contained and connected. + -v:: Run verbosely. diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index e394276b1a..5c0a4ab2d6 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -242,6 +242,7 @@ configuration options in linkgit:git-notes[1] to use this workflow). Note that the leading character does not have to be a dot; for example, you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. +-q:: --quiet:: Do not print the names of the generated files to standard output. @@ -437,7 +438,8 @@ Edit..Preferences..Composition, wrap plain text messages at 0 In Thunderbird 3: Edit..Preferences..Advanced..Config Editor. Search for "mail.wrap_long_lines". -Toggle it to make sure it is set to `false`. +Toggle it to make sure it is set to `false`. Also, search for +"mailnews.wraplength" and set the value to 0. 3. Disable the use of format=flowed: Edit..Preferences..Advanced..Config Editor. Search for diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 2402ed6828..e158a3b31f 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -9,7 +9,7 @@ git-gc - Cleanup unnecessary files and optimize the local repository SYNOPSIS -------- [verse] -'git gc' [--aggressive] [--auto] [--quiet] [--prune=<date> | --no-prune] +'git gc' [--aggressive] [--auto] [--quiet] [--prune=<date> | --no-prune] [--force] DESCRIPTION ----------- @@ -72,6 +72,10 @@ automatic consolidation of packs. --quiet:: Suppress all progress reports. +--force:: + Force `git gc` to run even if there may be another `git gc` + instance running on this repository. + Configuration ------------- diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index ac2694d04c..34097efea7 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -62,7 +62,8 @@ produced by --stat etc. Note that only message is considered, if also a diff is shown its size is not included. --L <start>,<end>:<file>, -L :<regex>:<file>:: +-L <start>,<end>:<file>:: +-L :<regex>:<file>:: Trace the evolution of the line range given by "<start>,<end>" (or the funcname regex <regex>) within the <file>. You may @@ -71,8 +72,6 @@ produced by --stat etc. give zero or one positive revision arguments. You can specify this option more than once. + -<start> and <end> can take one of these forms: - include::line-range-format.txt[] <revision range>:: diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index d7db2a3737..d2fc12ec77 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -11,7 +11,7 @@ SYNOPSIS [verse] 'git merge-file' [-L <current-name> [-L <base-name> [-L <other-name>]]] [--ours|--theirs|--union] [-p|--stdout] [-q|--quiet] [--marker-size=<n>] - <current-file> <base-file> <other-file> + [--[no-]diff3] <current-file> <base-file> <other-file> DESCRIPTION @@ -66,6 +66,9 @@ OPTIONS -q:: Quiet; do not warn about conflicts. +--diff3:: + Show conflicts in "diff3" style. + --ours:: --theirs:: --union:: diff --git a/Documentation/git-merge-tree.txt b/Documentation/git-merge-tree.txt index c5f84b6495..58731c1942 100644 --- a/Documentation/git-merge-tree.txt +++ b/Documentation/git-merge-tree.txt @@ -13,7 +13,7 @@ SYNOPSIS DESCRIPTION ----------- -Reads three treeish, and output trivial merge results and +Reads three tree-ish, and output trivial merge results and conflicting stages to the standard output. This is similar to what three-way 'git read-tree -m' does, but instead of storing the results in the index, the command outputs the entries to the diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index e93fcb49fd..b1f79881ef 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -13,7 +13,7 @@ SYNOPSIS DESCRIPTION ----------- -This script is used to move or rename a file, directory or symlink. +Move or rename a file, directory or symlink. git mv [-v] [-f] [-n] [-k] <source> <destination> git mv [-v] [-f] [-n] [-k] <source> ... <destination directory> @@ -44,6 +44,14 @@ OPTIONS --verbose:: Report the names of files as they are moved. +SUBMODULES +---------- +Moving a submodule using a gitfile (which means they were cloned +with a Git version 1.7.8 or newer) will update the gitfile and +core.worktree setting to make the submodule work in the new location. +It also will attempt to update the submodule.<name>.path setting in +the linkgit:gitmodules[5] file and stage that file (unless -n is used). + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index 15b00e0991..ca28fb8e2a 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git name-rev' [--tags] [--refs=<pattern>] - ( --all | --stdin | <committish>... ) + ( --all | --stdin | <commit-ish>... ) DESCRIPTION ----------- diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 6ef8d599d3..beea10b148 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -102,12 +102,18 @@ include::merge-options.txt[] :git-pull: 1 -r:: ---rebase:: - Rebase the current branch on top of the upstream branch after - fetching. If there is a remote-tracking branch corresponding to - the upstream branch and the upstream branch was rebased since last - fetched, the rebase uses that information to avoid rebasing - non-local changes. +--rebase[=false|true|preserve]:: + When true, rebase the current branch on top of the upstream + branch after fetching. If there is a remote-tracking branch + corresponding to the upstream branch and the upstream branch + was rebased since last fetched, the rebase uses that information + to avoid rebasing non-local changes. ++ +When preserve, also rebase the current branch on top of the upstream +branch, but pass `--preserve-merges` along to `git rebase` so that +locally created merge commits will not be flattened. ++ +When false, merge the current branch into the upstream branch. + See `pull.rebase`, `branch.<name>.rebase` and `branch.autosetuprebase` in linkgit:git-config[1] if you want to make `git pull` always use diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index f7dfe48d28..9eec740910 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -11,6 +11,7 @@ SYNOPSIS [verse] 'git push' [--all | --mirror | --tags] [--follow-tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] [-u | --set-upstream] + [--force-with-lease[=<refname>[:<expect>]]] [--no-verify] [<repository> [<refspec>...]] DESCRIPTION @@ -120,7 +121,7 @@ already exists on the remote side. --follow-tags:: Push all the refs that would be pushed without this option, and also push annotated tags in `refs/tags` that are missing - from the remote but are pointing at committish that are + from the remote but are pointing at commit-ish that are reachable from the refs being pushed. --receive-pack=<git-receive-pack>:: @@ -130,21 +131,75 @@ already exists on the remote side. repository over ssh, and you do not have the program in a directory on the default $PATH. +--[no-]force-with-lease:: +--force-with-lease=<refname>:: +--force-with-lease=<refname>:<expect>:: + Usually, "git push" refuses to update a remote ref that is + not an ancestor of the local ref used to overwrite it. ++ +This option bypasses the check, but instead requires that the +current value of the ref to be the expected value. "git push" +fails otherwise. ++ +Imagine that you have to rebase what you have already published. +You will have to bypass the "must fast-forward" rule in order to +replace the history you originally published with the rebased history. +If somebody else built on top of your original history while you are +rebasing, the tip of the branch at the remote may advance with her +commit, and blindly pushing with `--force` will lose her work. ++ +This option allows you to say that you expect the history you are +updating is what you rebased and want to replace. If the remote ref +still points at the commit you specified, you can be sure that no +other people did anything to the ref (it is like taking a "lease" on +the ref without explicitly locking it, and you update the ref while +making sure that your earlier "lease" is still valid). ++ +`--force-with-lease` alone, without specifying the details, will protect +all remote refs that are going to be updated by requiring their +current value to be the same as the remote-tracking branch we have +for them, unless specified with a `--force-with-lease=<refname>:<expect>` +option that explicitly states what the expected value is. ++ +`--force-with-lease=<refname>`, without specifying the expected value, will +protect the named ref (alone), if it is going to be updated, by +requiring its current value to be the same as the remote-tracking +branch we have for it. ++ +`--force-with-lease=<refname>:<expect>` will protect the named ref (alone), +if it is going to be updated, by requiring its current value to be +the same as the specified value <expect> (which is allowed to be +different from the remote-tracking branch we have for the refname, +or we do not even have to have such a remote-tracking branch when +this form is used). ++ +Note that all forms other than `--force-with-lease=<refname>:<expect>` +that specifies the expected current value of the ref explicitly are +still experimental and their semantics may change as we gain experience +with this feature. ++ +"--no-force-with-lease" will cancel all the previous --force-with-lease on the +command line. + -f:: --force:: Usually, the command refuses to update a remote ref that is not an ancestor of the local ref used to overwrite it. - This flag disables the check. This can cause the - remote repository to lose commits; use it with care. - Note that `--force` applies to all the refs that are pushed, - hence using it with `push.default` set to `matching` or with - multiple push destinations configured with `remote.*.push` - may overwrite refs other than the current branch (including - local refs that are strictly behind their remote counterpart). - To force a push to only one branch, use a `+` in front of the - refspec to push (e.g `git push origin +master` to force a push - to the `master` branch). See the `<refspec>...` section above - for details. + Also, when `--force-with-lease` option is used, the command refuses + to update a remote ref whose current value does not match + what is expected. ++ +This flag disables these checks, and can cause the remote repository +to lose commits; use it with care. ++ +Note that `--force` applies to all the refs that are pushed, hence +using it with `push.default` set to `matching` or with multiple push +destinations configured with `remote.*.push` may overwrite refs +other than the current branch (including local refs that are +strictly behind their remote counterpart). To force a push to only +one branch, use a `+` in front of the refspec to push (e.g `git push +origin +master` to force a push to the `master` branch). See the +`<refspec>...` section above for details. --repo=<repository>:: This option is only relevant if no <repository> argument is diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 6b2e1c86ab..94e07fdab5 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -322,7 +322,7 @@ You may find this (or --no-ff with an interactive rebase) helpful after reverting a topic branch merge, as this option recreates the topic branch with fresh commits so it can be remerged successfully without needing to "revert the reversion" (see the -link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). +link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for details). --ignore-whitespace:: --whitespace=<option>:: @@ -416,7 +416,7 @@ Without --interactive, this is a synonym for --force-rebase. You may find this helpful after reverting a topic branch merge, as this option recreates the topic branch with fresh commits so it can be remerged successfully without needing to "revert the reversion" (see the -link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). +link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for details). include::merge-strategies.txt[] diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 9c3e3bf83a..2507c8bd91 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -13,7 +13,7 @@ SYNOPSIS 'git remote add' [-t <branch>] [-m <master>] [-f] [--[no-]tags] [--mirror=<fetch|push>] <name> <url> 'git remote rename' <old> <new> 'git remote remove' <name> -'git remote set-head' <name> (-a | -d | <branch>) +'git remote set-head' <name> (-a | --auto | -d | --delete | <branch>) 'git remote set-branches' [--add] <name> <branch>... 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> @@ -101,9 +101,9 @@ branch. For example, if the default branch for `origin` is set to `master`, then `origin` may be specified wherever you would normally specify `origin/master`. + -With `-d`, the symbolic ref `refs/remotes/<name>/HEAD` is deleted. +With `-d` or `--delete`, the symbolic ref `refs/remotes/<name>/HEAD` is deleted. + -With `-a`, the remote is queried to determine its `HEAD`, then the +With `-a` or `--auto`, the remote is queried to determine its `HEAD`, then the symbolic-ref `refs/remotes/<name>/HEAD` is set to the same branch. e.g., if the remote `HEAD` is pointed at `next`, "`git remote set-head origin -a`" will set the symbolic-ref `refs/remotes/origin/HEAD` to `refs/remotes/origin/next`. This will diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index e0b4057976..f373ab48d4 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -20,8 +20,14 @@ The name of the 'replace' reference is the SHA-1 of the object that is replaced. The content of the 'replace' reference is the SHA-1 of the replacement object. +The replaced object and the replacement object must be of the same type. +This restriction can be bypassed using `-f`. + Unless `-f` is given, the 'replace' reference must not yet exist. +There is no other restriction on the replaced and replacement objects. +Merge commits can be replaced by non-merge commits and vice versa. + Replacement references will be used by default by all Git commands except those doing reachability traversal (prune, pack transfer and fsck). @@ -49,18 +55,34 @@ achieve the same effect as the `--no-replace-objects` option. OPTIONS ------- -f:: +--force:: If an existing replace ref for the same object exists, it will be overwritten (instead of failing). -d:: +--delete:: Delete existing replace refs for the given objects. -l <pattern>:: +--list <pattern>:: List replace refs for objects that match the given pattern (or all if no pattern is given). Typing "git replace" without arguments, also lists all replace refs. +CREATING REPLACEMENT OBJECTS +---------------------------- + +linkgit:git-filter-branch[1], linkgit:git-hash-object[1] and +linkgit:git-rebase[1], among other git commands, can be used to create +replacement objects from existing objects. + +If you want to replace many blobs, trees or commits that are part of a +string of commits, you may just want to create a replacement string of +commits and then only replace the commit at the tip of the target +string of commits with the commit at the tip of the replacement string +of commits. + BUGS ---- Comparing blobs or trees that have been replaced with those that @@ -69,12 +91,13 @@ go back to a replaced commit will move the branch to the replacement commit instead of the replaced commit. There may be other problems when using 'git rev-list' related to -pending objects. And of course things may break if an object of one -type is replaced by an object of another type (for example a blob -replaced by a commit). +pending objects. SEE ALSO -------- +linkgit:git-hash-object[1] +linkgit:git-filter-branch[1] +linkgit:git-rebase[1] linkgit:git-tag[1] linkgit:git-branch[1] linkgit:git[1] diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 2b126c0a77..d068a65377 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -24,9 +24,23 @@ distinguish between them. OPTIONS ------- + +Operation Modes +~~~~~~~~~~~~~~~ + +Each of these options must appear first on the command line. + --parseopt:: Use 'git rev-parse' in option parsing mode (see PARSEOPT section below). +--sq-quote:: + Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE + section below). In contrast to the `--sq` option below, this + mode does only quoting. Nothing else is done to command input. + +Options for --parseopt +~~~~~~~~~~~~~~~~~~~~~~ + --keep-dashdash:: Only meaningful in `--parseopt` mode. Tells the option parser to echo out the first `--` met instead of skipping it. @@ -36,10 +50,8 @@ OPTIONS the first non-option argument. This can be used to parse sub-commands that take options themselves. ---sq-quote:: - Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE - section below). In contrast to the `--sq` option below, this - mode does only quoting. Nothing else is done to command input. +Options for Filtering +~~~~~~~~~~~~~~~~~~~~~ --revs-only:: Do not output flags and parameters not meant for @@ -55,6 +67,9 @@ OPTIONS --no-flags:: Do not output flag parameters. +Options for Output +~~~~~~~~~~~~~~~~~~ + --default <arg>:: If there is no parameter given by the user, use `<arg>` instead. @@ -110,6 +125,17 @@ can be used. strip '{caret}' prefix from the object names that already have one. +--abbrev-ref[=(strict|loose)]:: + A non-ambiguous short name of the objects name. + The option core.warnAmbiguousRefs is used to select the strict + abbreviation mode. + +--short:: +--short=number:: + Instead of outputting the full SHA-1 values of object names try to + abbreviate them to a shorter unique name. When no length is specified + 7 is used. The minimum length is 4. + --symbolic:: Usually the object names are output in SHA-1 form (with possible '{caret}' prefix); this option makes them output in a @@ -123,16 +149,8 @@ can be used. unfortunately named tag "master"), and show them as full refnames (e.g. "refs/heads/master"). ---abbrev-ref[=(strict|loose)]:: - A non-ambiguous short name of the objects name. - The option core.warnAmbiguousRefs is used to select the strict - abbreviation mode. - ---disambiguate=<prefix>:: - Show every object whose name begins with the given prefix. - The <prefix> must be at least 4 hexadecimal digits long to - avoid listing each and every object in the repository by - mistake. +Options for Objects +~~~~~~~~~~~~~~~~~~~ --all:: Show all refs found in `refs/`. @@ -155,18 +173,20 @@ shown. If the pattern does not contain a globbing character (`?`, character (`?`, `*`, or `[`), it is turned into a prefix match by appending `/*`. ---show-toplevel:: - Show the absolute path of the top-level directory. +--disambiguate=<prefix>:: + Show every object whose name begins with the given prefix. + The <prefix> must be at least 4 hexadecimal digits long to + avoid listing each and every object in the repository by + mistake. ---show-prefix:: - When the command is invoked from a subdirectory, show the - path of the current directory relative to the top-level - directory. +Options for Files +~~~~~~~~~~~~~~~~~ ---show-cdup:: - When the command is invoked from a subdirectory, show the - path of the top-level directory relative to the current - directory (typically a sequence of "../", or an empty string). +--local-env-vars:: + List the GIT_* environment variables that are local to the + repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR). + Only the names of the variables are listed, not their value, + even if they are set. --git-dir:: Show `$GIT_DIR` if defined. Otherwise show the path to @@ -188,17 +208,27 @@ print a message to stderr and exit with nonzero status. --is-bare-repository:: When the repository is bare print "true", otherwise "false". ---local-env-vars:: - List the GIT_* environment variables that are local to the - repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR). - Only the names of the variables are listed, not their value, - even if they are set. +--resolve-git-dir <path>:: + Check if <path> is a valid repository or a gitfile that + points at a valid repository, and print the location of the + repository. If <path> is a gitfile then the resolved path + to the real repository is printed. ---short:: ---short=number:: - Instead of outputting the full SHA-1 values of object names try to - abbreviate them to a shorter unique name. When no length is specified - 7 is used. The minimum length is 4. +--show-cdup:: + When the command is invoked from a subdirectory, show the + path of the top-level directory relative to the current + directory (typically a sequence of "../", or an empty string). + +--show-prefix:: + When the command is invoked from a subdirectory, show the + path of the current directory relative to the top-level + directory. + +--show-toplevel:: + Show the absolute path of the top-level directory. + +Other Options +~~~~~~~~~~~~~ --since=datestring:: --after=datestring:: @@ -213,12 +243,6 @@ print a message to stderr and exit with nonzero status. <args>...:: Flags and parameters to be parsed. ---resolve-git-dir <path>:: - Check if <path> is a valid repository or a gitfile that - points at a valid repository, and print the location of the - repository. If <path> is a gitfile then the resolved path - to the real repository is printed. - include::revisions.txt[] diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index f79c9d8583..2de67a5496 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -59,7 +59,7 @@ brought in by the merge. As a result, later merges will only bring in tree changes introduced by commits that are not ancestors of the previously reverted merge. This may or may not be what you want. + -See the link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for +See the link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for more details. --no-edit:: diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 1d876c2619..9d731b453d 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -134,14 +134,16 @@ use the following command: git diff --name-only --diff-filter=D -z | xargs -0 git rm --cached ---------------- -Submodules -~~~~~~~~~~ +SUBMODULES +---------- Only submodules using a gitfile (which means they were cloned with a Git version 1.7.8 or newer) will be removed from the work tree, as their repository lives inside the .git directory of the superproject. If a submodule (or one of those nested inside it) still uses a .git directory, `git rm` will fail - no matter if forced -or not - to protect the submodule's history. +or not - to protect the submodule's history. If it exists the +submodule.<name> section in the linkgit:gitmodules[5] file will also +be removed and that file will be staged (unless --cached or -n are used). A submodule is considered up-to-date when the HEAD is the same as recorded in the index, no tracked files are modified and no untracked diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 9046df98a0..a4acaa038c 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -210,7 +210,13 @@ directory. If `status.submodulesummary` is set to a non zero number or true (identical to -1 or an unlimited number), the submodule summary will be enabled for the long format and a summary of commits for modified submodules will be -shown (see --summary-limit option of linkgit:git-submodule[1]). +shown (see --summary-limit option of linkgit:git-submodule[1]). Please note +that the summary output from the status command will be suppressed for all +submodules when `diff.ignoreSubmodules` is set to 'all' or only for those +submodules where `submodule.<name>.ignore=all`. To also view the summary for +ignored submodules you can either use the --ignore-submodules=dirty command +line option or the 'git submodule summary' command, which shows a similar +output but does not honor these settings. SEE ALSO -------- diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 4dd3bcb511..2a3847649d 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -79,8 +79,21 @@ COMMANDS trailing slash, so be sure you include one in the argument if that is what you want. If --branches/-b is specified, the prefix must include a trailing slash. - Setting a prefix is useful if you wish to track multiple - projects that share a common repository. + Setting a prefix (with a trailing slash) is strongly + encouraged in any case, as your SVN-tracking refs will + then be located at "refs/remotes/$prefix/*", which is + compatible with Git's own remote-tracking ref layout + (refs/remotes/$remote/*). Setting a prefix is also useful + if you wish to track multiple projects that share a common + repository. ++ +NOTE: In Git v2.0, the default prefix will CHANGE from "" (no prefix) +to "origin/". This is done to put SVN-tracking refs at +"refs/remotes/origin/*" instead of "refs/remotes/*", and make them +more compatible with how Git's own remote-tracking refs are organized +(i.e. refs/remotes/$remote/*). You can enjoy the same benefits today, +by using the --prefix option. + --ignore-paths=<regex>;; When passed to 'init' or 'clone' this regular expression will be preserved as a config key. See 'fetch' for a description @@ -104,8 +117,11 @@ COMMANDS 'fetch':: Fetch unfetched revisions from the Subversion remote we are tracking. The name of the [svn-remote "..."] section in the - .git/config file may be specified as an optional command-line - argument. + $GIT_DIR/config file may be specified as an optional + command-line argument. ++ +This automatically updates the rev_map if needed (see +'$GIT_DIR/svn/\*\*/.rev_map.*' in the FILES section below for details). --localtime;; Store Git commit times in the local timezone instead of UTC. This @@ -201,6 +217,9 @@ accept. However, '--fetch-all' only fetches from the current + Like 'git rebase'; this requires that the working tree be clean and have no uncommitted changes. ++ +This automatically updates the rev_map if needed (see +'$GIT_DIR/svn/\*\*/.rev_map.*' in the FILES section below for details). -l;; --local;; @@ -435,8 +454,8 @@ Any other arguments are passed directly to 'git log' specific revision. 'gc':: - Compress $GIT_DIR/svn/<refname>/unhandled.log files in .git/svn - and remove $GIT_DIR/svn/<refname>index files in .git/svn. + Compress $GIT_DIR/svn/<refname>/unhandled.log files and remove + $GIT_DIR/svn/<refname>/index files. 'reset':: Undoes the effects of 'fetch' back to the specified revision. @@ -449,9 +468,10 @@ Any other arguments are passed directly to 'git log' file cannot be ignored forever (with --ignore-paths) the only way to repair the repo is to use 'reset'. + -Only the rev_map and refs/remotes/git-svn are changed. Follow 'reset' -with a 'fetch' and then 'git reset' or 'git rebase' to move local -branches onto the new tree. +Only the rev_map and refs/remotes/git-svn are changed (see +'$GIT_DIR/svn/\*\*/.rev_map.*' in the FILES section below for details). +Follow 'reset' with a 'fetch' and then 'git reset' or 'git rebase' to +move local branches onto the new tree. -r <n>;; --revision=<n>;; @@ -684,7 +704,7 @@ svn-remote.<name>.noMetadata:: + This option can only be used for one-shot imports as 'git svn' will not be able to fetch again without metadata. Additionally, -if you lose your .git/svn/**/.rev_map.* files, 'git svn' will not +if you lose your '$GIT_DIR/svn/\*\*/.rev_map.*' files, 'git svn' will not be able to rebuild them. + The 'git svn log' command will not work on repositories using @@ -804,16 +824,16 @@ Tracking and contributing to an entire Subversion-managed project ------------------------------------------------------------------------ # Clone a repo with standard SVN directory layout (like git clone): - git svn clone http://svn.example.com/project --stdlayout + git svn clone http://svn.example.com/project --stdlayout --prefix svn/ # Or, if the repo uses a non-standard directory layout: - git svn clone http://svn.example.com/project -T tr -b branch -t tag + git svn clone http://svn.example.com/project -T tr -b branch -t tag --prefix svn/ # View all branches and tags you have cloned: git branch -r # Create a new branch in SVN git svn branch waldo # Reset your master to trunk (or any other branch, replacing 'trunk' # with the appropriate name): - git reset --hard remotes/trunk + git reset --hard svn/trunk # You may only dcommit to one branch/tag/trunk at a time. The usage # of dcommit/rebase/show-ignore should be the same as above. ------------------------------------------------------------------------ @@ -827,7 +847,7 @@ have each person clone that repository with 'git clone': ------------------------------------------------------------------------ # Do the initial import on a server - ssh server "cd /pub && git svn clone http://svn.example.com/project + ssh server "cd /pub && git svn clone http://svn.example.com/project [options...]" # Clone locally - make sure the refs/remotes/ space matches the server mkdir project cd project @@ -840,8 +860,9 @@ have each person clone that repository with 'git clone': git config --remove-section remote.origin # Create a local branch from one of the branches just fetched git checkout -b master FETCH_HEAD -# Initialize 'git svn' locally (be sure to use the same URL and -T/-b/-t options as were used on server) - git svn init http://svn.example.com/project +# Initialize 'git svn' locally (be sure to use the same URL and +# --stdlayout/-T/-b/-t/--prefix options as were used on server) + git svn init http://svn.example.com/project [options...] # Pull the latest changes from Subversion git svn rebase ------------------------------------------------------------------------ @@ -973,12 +994,22 @@ without giving any repository layout options. If the full history with branches and tags is required, the options '--trunk' / '--branches' / '--tags' must be used. +When using the options for describing the repository layout (--trunk, +--tags, --branches, --stdlayout), please also specify the --prefix +option (e.g. '--prefix=origin/') to cause your SVN-tracking refs to be +placed at refs/remotes/origin/* rather than the default refs/remotes/*. +The former is more compatible with the layout of Git's "regular" +remote-tracking refs (refs/remotes/$remote/*), and may potentially +prevent similarly named SVN branches and Git remotes from clobbering +each other. In Git v2.0 the default prefix used (i.e. when no --prefix +is given) will change from "" (no prefix) to "origin/". + When using multiple --branches or --tags, 'git svn' does not automatically handle name collisions (for example, if two branches from different paths have the same name, or if a branch and a tag have the same name). In these cases, use 'init' to set up your Git repository then, before your first 'fetch', edit -the .git/config file so that the branches and tags are associated with -different name spaces. For example: +the $GIT_DIR/config file so that the branches and tags are associated +with different name spaces. For example: branches = stable/*:refs/remotes/svn/stable/* branches = debug/*:refs/remotes/svn/debug/* @@ -1006,7 +1037,7 @@ CONFIGURATION ------------- 'git svn' stores [svn-remote] configuration information in the -repository .git/config file. It is similar the core Git +repository $GIT_DIR/config file. It is similar the core Git [remote] sections except 'fetch' keys do not accept glob arguments; but they are instead handled by the 'branches' and 'tags' keys. Since some SVN repositories are oddly @@ -1035,8 +1066,8 @@ comma-separated list of names within braces. For example: [svn-remote "huge-project"] url = http://server.org/svn fetch = trunk/src:refs/remotes/trunk - branches = branches/{red,green}/src:refs/remotes/branches/* - tags = tags/{1.0,2.0}/src:refs/remotes/tags/* + branches = branches/{red,green}/src:refs/remotes/project-a/branches/* + tags = tags/{1.0,2.0}/src:refs/remotes/project-a/tags/* ------------------------------------------------------------------------ Multiple fetch, branches, and tags keys are supported: @@ -1060,8 +1091,21 @@ $ git svn branch -d branches/server release-2-3-0 Note that git-svn keeps track of the highest revision in which a branch or tag has appeared. If the subset of branches or tags is changed after -fetching, then .git/svn/.metadata must be manually edited to remove (or -reset) branches-maxRev and/or tags-maxRev as appropriate. +fetching, then $GIT_DIR/svn/.metadata must be manually edited to remove +(or reset) branches-maxRev and/or tags-maxRev as appropriate. + +FILES +----- +$GIT_DIR/svn/\*\*/.rev_map.*:: + Mapping between Subversion revision numbers and Git commit + names. In a repository where the noMetadata option is not set, + this can be rebuilt from the git-svn-id: lines that are at the + end of every commit (see the 'svn.noMetadata' section above for + details). ++ +'git svn fetch' and 'git svn rebase' automatically update the rev_map +if it is missing or not up to date. 'git svn reset' automatically +rewinds it. SEE ALSO -------- diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index 0df13ff6f4..0a0a5512b3 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -8,7 +8,7 @@ git-update-ref - Update the object name stored in a ref safely SYNOPSIS -------- [verse] -'git update-ref' [-m <reason>] (-d <ref> [<oldvalue>] | [--no-deref] <ref> <newvalue> [<oldvalue>]) +'git update-ref' [-m <reason>] (-d <ref> [<oldvalue>] | [--no-deref] <ref> <newvalue> [<oldvalue>] | --stdin [-z]) DESCRIPTION ----------- @@ -58,6 +58,58 @@ archive by creating a symlink tree). With `-d` flag, it deletes the named <ref> after verifying it still contains <oldvalue>. +With `--stdin`, update-ref reads instructions from standard input and +performs all modifications together. Specify commands of the form: + + update SP <ref> SP <newvalue> [SP <oldvalue>] LF + create SP <ref> SP <newvalue> LF + delete SP <ref> [SP <oldvalue>] LF + verify SP <ref> [SP <oldvalue>] LF + option SP <opt> LF + +Quote fields containing whitespace as if they were strings in C source +code. Alternatively, use `-z` to specify commands without quoting: + + update SP <ref> NUL <newvalue> NUL [<oldvalue>] NUL + create SP <ref> NUL <newvalue> NUL + delete SP <ref> NUL [<oldvalue>] NUL + verify SP <ref> NUL [<oldvalue>] NUL + option SP <opt> NUL + +Lines of any other format or a repeated <ref> produce an error. +Command meanings are: + +update:: + Set <ref> to <newvalue> after verifying <oldvalue>, if given. + Specify a zero <newvalue> to ensure the ref does not exist + after the update and/or a zero <oldvalue> to make sure the + ref does not exist before the update. + +create:: + Create <ref> with <newvalue> after verifying it does not + exist. The given <newvalue> may not be zero. + +delete:: + Delete <ref> after verifying it exists with <oldvalue>, if + given. If given, <oldvalue> may not be zero. + +verify:: + Verify <ref> against <oldvalue> but do not change it. If + <oldvalue> zero or missing, the ref must not exist. + +option:: + Modify behavior of the next command naming a <ref>. + The only valid option is `no-deref` to avoid dereferencing + a symbolic ref. + +Use 40 "0" or the empty string to specify a zero value, except that +with `-z` an empty <oldvalue> is considered missing. + +If all <ref>s can be locked with matching <oldvalue>s +simultaneously, all modifications are performed. Otherwise, no +modifications are performed. Note that while each individual +<ref> is updated or deleted atomically, a concurrent reader may +still see a subset of the modifications. Logging Updates --------------- diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index c600b61e2b..8b63ceb00e 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -13,43 +13,17 @@ SYNOPSIS DESCRIPTION ----------- -Shows commit logs and diff output each commit introduces. The -command internally invokes 'git rev-list' piped to -'git diff-tree', and takes command line options for both of -these commands. -This manual page describes only the most frequently used options. +Shows commit logs and diff output each commit introduces. +New users are encouraged to use linkgit:git-log[1] instead. The +`whatchanged` command is essentially the same as linkgit:git-log[1] +but defaults to show the raw format diff output and to skip merges. -OPTIONS -------- --p:: - Show textual diffs, instead of the Git internal diff - output format that is useful only to tell the changed - paths and their nature of changes. +The command is kept primarily for historical reasons; fingers of +many people who learned Git long before `git log` was invented by +reading Linux kernel mailing list are trained to type it. --<n>:: - Limit output to <n> commits. - -<since>..<until>:: - Limit output to between the two named commits (bottom - exclusive, top inclusive). - --r:: - Show Git internal diff output, but for the whole tree, - not just the top level. - --m:: - By default, differences for merge commits are not shown. - With this flag, show differences to that commit from all - of its parents. -+ -However, it is not very useful in general, although it -*is* useful on a file-by-file basis. - -include::pretty-options.txt[] - -include::pretty-formats.txt[] Examples -------- diff --git a/Documentation/git.txt b/Documentation/git.txt index 5b83e0ab98..da7be1fdf4 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -9,7 +9,7 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--help] [-c <name>=<value>] +'git' [--version] [--help] [-C <path>] [-c <name>=<value>] [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] @@ -396,6 +396,20 @@ displayed. See linkgit:git-help[1] for more information, because `git --help ...` is converted internally into `git help ...`. +-C <path>:: + Run as if git was started in '<path>' instead of the current working + directory. When multiple `-C` options are given, each subsequent + non-absolute `-C <path>` is interpreted relative to the preceding `-C + <path>`. ++ +This option affects options that expect path name like `--git-dir` and +`--work-tree` in that their interpretations of the path names would be +made relative to the working directory caused by the `-C` option. For +example the following invocations are equivalent: + + git --git-dir=a.git --work-tree=b -C c status + git --git-dir=c/a.git --work-tree=c/b status + -c <name>=<value>:: Pass a configuration parameter to the command. The value given will override values from configuration files. @@ -458,10 +472,25 @@ help ...`. linkgit:git-replace[1] for more information. --literal-pathspecs:: - Treat pathspecs literally, rather than as glob patterns. This is - equivalent to setting the `GIT_LITERAL_PATHSPECS` environment + Treat pathspecs literally (i.e. no globbing, no pathspec magic). + This is equivalent to setting the `GIT_LITERAL_PATHSPECS` environment variable to `1`. +--glob-pathspecs:: + Add "glob" magic to all pathspec. This is equivalent to setting + the `GIT_GLOB_PATHSPECS` environment variable to `1`. Disabling + globbing on individual pathspecs can be done using pathspec + magic ":(literal)" + +--noglob-pathspecs:: + Add "literal" magic to all pathspec. This is equivalent to setting + the `GIT_NOGLOB_PATHSPECS` environment variable to `1`. Enabling + globbing on individual pathspecs can be done using pathspec + magic ":(glob)" + +--icase-pathspecs:: + Add "icase" magic to all pathspec. This is equivalent to setting + the `GIT_ICASE_PATHSPECS` environment variable to `1`. GIT COMMANDS ------------ @@ -824,7 +853,7 @@ for further details. 'GIT_FLUSH':: If this environment variable is set to "1", then commands such as 'git blame' (in incremental mode), 'git rev-list', 'git log', - 'git check-attr', 'git check-ignore', and 'git whatchanged' will + 'git check-attr' and 'git check-ignore' will force a flush of the output stream after each record have been flushed. If this variable is set to "0", the output of these commands will be done @@ -868,6 +897,18 @@ GIT_LITERAL_PATHSPECS:: literal paths to Git (e.g., paths previously given to you by `git ls-tree`, `--raw` diff output, etc). +GIT_GLOB_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs as glob patterns (aka "glob" magic). + +GIT_NOGLOB_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs as literal (aka "literal" magic). + +GIT_ICASE_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs as case-insensitive. + Discussion[[Discussion]] ------------------------ diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 9ac5088acd..7d54b77f3c 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -106,7 +106,7 @@ couple of magic command line options: + --------------------------------------------- $ git describe -h -usage: git describe [options] <committish>* +usage: git describe [options] <commit-ish>* or: git describe [options] --dirty --contains find the tag that comes after the commit diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index f538a870c7..058a352980 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -534,42 +534,9 @@ all, but just show the actual commit message. In fact, together with the 'git rev-list' program (which generates a list of revisions), 'git diff-tree' ends up being a veritable fount of -changes. A trivial (but very useful) script called 'git whatchanged' is -included with Git which does exactly this, and shows a log of recent -activities. - -To see the whole history of our pitiful little git-tutorial project, you -can do - ----------------- -$ git log ----------------- - -which shows just the log messages, or if we want to see the log together -with the associated patches use the more complex (and much more -powerful) - ----------------- -$ git whatchanged -p ----------------- - -and you will see exactly what has changed in the repository over its -short history. - -[NOTE] -When using the above two commands, the initial commit will be shown. -If this is a problem because it is huge, you can hide it by setting -the log.showroot configuration variable to false. Having this, you -can still show it for each command just adding the `--root` option, -which is a flag for 'git diff-tree' accepted by both commands. - -With that, you should now be having some inkling of what Git does, and -can explore on your own. - -[NOTE] -Most likely, you are not directly using the core -Git Plumbing commands, but using Porcelain such as 'git add', `git-rm' -and `git-commit'. +changes. You can emulate `git log`, `git log -p`, etc. with a trivial +script that pipes the output of `git rev-list` to `git diff-tree --stdin`, +which was exactly how early versions of `git log` were implemented. Tagging a version diff --git a/Documentation/gitcvs-migration.txt b/Documentation/gitcvs-migration.txt index 5ab5b0727f..5ea94cbceb 100644 --- a/Documentation/gitcvs-migration.txt +++ b/Documentation/gitcvs-migration.txt @@ -157,7 +157,7 @@ points. You can use these, for example, to send all commits to the shared repository to a mailing list. See linkgit:githooks[5]. You can enforce finer grained permissions using update hooks. See -link:howto/update-hook-example.txt[Controlling access to branches using +link:howto/update-hook-example.html[Controlling access to branches using update hooks]. Providing CVS Access to a Git Repository diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 6a1ca4abad..f7be93f631 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -75,7 +75,8 @@ submodule.<name>.ignore:: the superproject, the setting there will override the one found in .gitmodules. Both settings can be overridden on the command line by using the - "--ignore-submodule" option. + "--ignore-submodule" option. The 'git submodule' commands are not + affected by this setting. EXAMPLES diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 0827f69139..f1f4ca9727 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -120,6 +120,11 @@ connecting (see the 'connect' command under COMMANDS). When choosing between 'push' and 'export', Git prefers 'push'. Other frontends may have some other order of preference. +'no-private-update':: + When using the 'refspec' capability, git normally updates the + private ref on successful push. This update is disabled when + the remote-helper declares the capability 'no-private-update'. + Capabilities for Fetching ^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -143,6 +148,10 @@ Supported commands: 'list', 'fetch'. + Supported commands: 'list', 'import'. +'check-connectivity':: + Can guarantee that when a clone is requested, the received + pack is self contained and is connected. + If a helper advertises 'connect', Git will use it if possible and fall back to another capability if the helper requests so when connecting (see the 'connect' command under COMMANDS). @@ -176,6 +185,12 @@ applicable refspec takes precedence. The left-hand of refspecs advertised with this capability must cover all refs reported by the list command. If no 'refspec' capability is advertised, there is an implied `refspec *:*`. ++ +When writing remote-helpers for decentralized version control +systems, it is advised to keep a local copy of the repository to +interact with, and to let the private namespace refs point to this +local repository, while the refs/remotes namespace is used to track +the remote repository. 'bidi-import':: This modifies the 'import' capability. @@ -270,6 +285,9 @@ Optionally may output a 'lock <file>' line indicating a file under GIT_DIR/objects/pack which is keeping a pack until refs can be suitably updated. + +If option 'check-connectivity' is requested, the helper must output +'connectivity-ok' if the clone is self-contained and connected. ++ Supported if the helper has the "fetch" capability. 'push' +<src>:<dst>:: @@ -416,6 +434,9 @@ set by Git if the remote helper has the 'option' capability. must not rely on this option being set before connect request occurs. +'option check-connectivity' \{'true'|'false'\}:: + Request the helper to check connectivity of a clone. + SEE ALSO -------- linkgit:git-remote[1] diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index dba5062b37..e4706615be 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -82,6 +82,18 @@ to point at the new commit. to the top <<def_directory,directory>> of the stored revision. +[[def_commit-ish]]commit-ish (also committish):: + A <<def_commit_object,commit object>> or an + <<def_object,object>> that can be recursively dereferenced to + a commit object. + The following are all commit-ishes: + a commit object, + a <<def_tag_object,tag object>> that points to a commit + object, + a tag object that points to a tag object that points to a + commit object, + etc. + [[def_core_git]]core Git:: Fundamental data structures and utilities of Git. Exposes only limited source code management tools. @@ -322,10 +334,54 @@ and a close parentheses `)`, and the remainder is the pattern to match against the path. + The "magic signature" consists of an ASCII symbol that is not -alphanumeric. Currently only the slash `/` is recognized as a -"magic signature": it makes the pattern match from the root of -the working tree, even when you are running the command from -inside a subdirectory. +alphanumeric. ++ +-- +top `/`;; + The magic word `top` (mnemonic: `/`) makes the pattern match + from the root of the working tree, even when you are running + the command from inside a subdirectory. + +literal;; + Wildcards in the pattern such as `*` or `?` are treated + as literal characters. + +icase;; + Case insensitive match. + +glob;; + Git treats the pattern as a shell glob suitable for + consumption by fnmatch(3) with the FNM_PATHNAME flag: + wildcards in the pattern will not match a / in the pathname. + For example, "Documentation/{asterisk}.html" matches + "Documentation/git.html" but not "Documentation/ppc/ppc.html" + or "tools/perf/Documentation/perf.html". ++ +Two consecutive asterisks ("`**`") in patterns matched against +full pathname may have special meaning: + + - A leading "`**`" followed by a slash means match in all + directories. For example, "`**/foo`" matches file or directory + "`foo`" anywhere, the same as pattern "`foo`". "**/foo/bar" + matches file or directory "`bar`" anywhere that is directly + under directory "`foo`". + + - A trailing "/**" matches everything inside. For example, + "abc/**" matches all files inside directory "abc", relative + to the location of the `.gitignore` file, with infinite depth. + + - A slash followed by two consecutive asterisks then a slash + matches zero or more directories. For example, "`a/**/b`" + matches "`a/b`", "`a/x/b`", "`a/x/y/b`" and so on. + + - Other consecutive asterisks are considered invalid. ++ +Glob magic is incompatible with literal magic. +-- ++ +Currently only the slash `/` is recognized as the "magic signature", +but it is envisioned that we will support more types of magic in later +versions of Git. + A pathspec with only a colon means "there is no pathspec". This form should not be combined with other pathspec. @@ -383,10 +439,20 @@ should not be combined with other pathspec. to the result. [[def_ref]]ref:: - A 40-byte hex representation of a <<def_SHA1,SHA-1>> or a name that - denotes a particular <<def_object,object>>. They may be stored in - a file under `$GIT_DIR/refs/` directory, or - in the `$GIT_DIR/packed-refs` file. + A name that begins with `refs/` (e.g. `refs/heads/master`) + that points to an <<def_object_name,object name>> or another + ref (the latter is called a <<def_symref,symbolic ref>>). + For convenience, a ref can sometimes be abbreviated when used + as an argument to a Git command; see linkgit:gitrevisions[7] + for details. + Refs are stored in the <<def_repository,repository>>. ++ +The ref namespace is hierarchical. +Different subhierarchies are used for different purposes (e.g. the +`refs/heads/` hierarchy is used to represent local branches). ++ +There are a few special-purpose refs that do not begin with `refs/`. +The most notable example is `HEAD`. [[def_reflog]]reflog:: A reflog shows the local "history" of a ref. In other words, @@ -486,10 +552,19 @@ should not be combined with other pathspec. with refs to the associated blob and/or tree objects. A <<def_tree,tree>> is equivalent to a <<def_directory,directory>>. -[[def_tree-ish]]tree-ish:: - A <<def_ref,ref>> pointing to either a <<def_commit_object,commit - object>>, a <<def_tree_object,tree object>>, or a <<def_tag_object,tag - object>> pointing to a tag or commit or tree object. +[[def_tree-ish]]tree-ish (also treeish):: + A <<def_tree_object,tree object>> or an <<def_object,object>> + that can be recursively dereferenced to a tree object. + Dereferencing a <<def_commit_object,commit object>> yields the + tree object corresponding to the <<def_revision,revision>>'s + top <<def_directory,directory>>. + The following are all tree-ishes: + a <<def_commit-ish,commit-ish>>, + a tree object, + a <<def_tag_object,tag object>> that points to a tree object, + a tag object that points to a tag object that points to a tree + object, + etc. [[def_unmerged_index]]unmerged index:: An <<def_index,index>> which contains unmerged diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt index 075418eeeb..acf3e477e5 100644 --- a/Documentation/howto/revert-a-faulty-merge.txt +++ b/Documentation/howto/revert-a-faulty-merge.txt @@ -37,7 +37,7 @@ where A and B are on the side development that was not so good, M is the merge that brings these premature changes into the mainline, x are changes unrelated to what the side branch did and already made on the mainline, and W is the "revert of the merge M" (doesn't W look M upside down?). -IOW, "diff W^..W" is similar to "diff -R M^..M". +IOW, `"diff W^..W"` is similar to `"diff -R M^..M"`. Such a "revert" of a merge can be made with: @@ -121,9 +121,9 @@ If you reverted the revert in such a case as in the previous example: ---A---B A'--B'--C' where Y is the revert of W, A' and B' are rerolled A and B, and there may -also be a further fix-up C' on the side branch. "diff Y^..Y" is similar -to "diff -R W^..W" (which in turn means it is similar to "diff M^..M"), -and "diff A'^..C'" by definition would be similar but different from that, +also be a further fix-up C' on the side branch. `"diff Y^..Y"` is similar +to `"diff -R W^..W"` (which in turn means it is similar to `"diff M^..M"`), +and `"diff A'^..C'"` by definition would be similar but different from that, because it is a rerolled series of the earlier change. There will be a lot of overlapping changes that result in conflicts. So do not do "revert of revert" blindly without thinking.. diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt index 0d5419e1a9..85f69dbac9 100644 --- a/Documentation/howto/revert-branch-rebase.txt +++ b/Documentation/howto/revert-branch-rebase.txt @@ -154,7 +154,7 @@ $ git pull . master Packing 0 objects Unpacking 0 objects -* committish: e3a693c... refs/heads/master from . +* commit-ish: e3a693c... refs/heads/master from . Trying to merge e3a693c... into 8c1f5f0... using 10d781b... Committed merge 7fb9b7262a1d1e0a47bbfdcbbcf50ce0635d3f8f cache.h | 8 ++++---- diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt index 7f4943e102..981cbddc86 100644 --- a/Documentation/howto/setup-git-server-over-http.txt +++ b/Documentation/howto/setup-git-server-over-http.txt @@ -81,8 +81,8 @@ Initialize a bare repository $ git --bare init -Change the ownership to your web-server's credentials. Use "grep ^User -httpd.conf" and "grep ^Group httpd.conf" to find out: +Change the ownership to your web-server's credentials. Use `"grep ^User +httpd.conf"` and `"grep ^Group httpd.conf"` to find out: $ chown -R www.www . diff --git a/Documentation/line-range-format.txt b/Documentation/line-range-format.txt index 3e7ce72daa..d7f26039ca 100644 --- a/Documentation/line-range-format.txt +++ b/Documentation/line-range-format.txt @@ -1,3 +1,5 @@ +<start> and <end> can take one of these forms: + - number + If <start> or <end> is a number, it specifies an @@ -7,7 +9,10 @@ absolute line number (lines count from 1). - /regex/ + This form will use the first line matching the given -POSIX regex. If <end> is a regex, it will search +POSIX regex. If <start> is a regex, it will search from the end of +the previous `-L` range, if any, otherwise from the start of file. +If <start> is ``^/regex/'', it will search from the start of file. +If <end> is a regex, it will search starting at the line given by <start>. + @@ -15,11 +20,10 @@ starting at the line given by <start>. + This is only valid for <end> and will specify a number of lines before or after the line given by <start>. -+ -- :regex + -If the option's argument is of the form :regex, it denotes the range +If ``:<regex>'' is given in place of <start> and <end>, it denotes the range from the first funcname line that matches <regex>, up to the next -funcname line. -+ +funcname line. ``:<regex>'' searches from the end of the previous `-L` range, +if any, otherwise from the start of file. +``^:<regex>'' searches from the start of file. diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index d477b3f6bc..2c06ed34ad 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -58,6 +58,9 @@ the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. While the ref name encoding is unspecified, UTF-8 is preferred as some output processing may assume ref names in UTF-8. +'@':: + '@' alone is a shortcut for 'HEAD'. + '<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: A ref followed by the suffix '@' with a date specification enclosed in a brace @@ -111,16 +114,23 @@ some output processing may assume ref names in UTF-8. '<rev>{caret}\{<type>\}', e.g. 'v0.99.8{caret}\{commit\}':: A suffix '{caret}' followed by an object type name enclosed in - brace pair means the object - could be a tag, and dereference the tag recursively until an - object of that type is found or the object cannot be - dereferenced anymore (in which case, barf). '<rev>{caret}0' + brace pair means dereference the object at '<rev>' recursively until + an object of type '<type>' is found or the object cannot be + dereferenced anymore (in which case, barf). + For example, if '<rev>' is a commit-ish, '<rev>{caret}\{commit\}' + describes the corresponding commit object. + Similarly, if '<rev>' is a tree-ish, '<rev>{caret}\{tree\}' + describes the corresponding tree object. + '<rev>{caret}0' is a short-hand for '<rev>{caret}\{commit\}'. + 'rev{caret}\{object\}' can be used to make sure 'rev' names an object that exists, without requiring 'rev' to be a tag, and without dereferencing 'rev'; because a tag is already an object, it does not have to be dereferenced even once to get to an object. ++ +'rev{caret}\{tag\}' can be used to ensure that 'rev' identifies an +existing tag object. '<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: A suffix '{caret}' followed by an empty brace pair diff --git a/Documentation/technical/api-setup.txt b/Documentation/technical/api-setup.txt index 4f63a04d7d..540e455689 100644 --- a/Documentation/technical/api-setup.txt +++ b/Documentation/technical/api-setup.txt @@ -8,6 +8,42 @@ Talk about * is_inside_git_dir() * is_inside_work_tree() * setup_work_tree() -* get_pathspec() (Dscho) + +Pathspec +-------- + +See glossary-context.txt for the syntax of pathspec. In memory, a +pathspec set is represented by "struct pathspec" and is prepared by +parse_pathspec(). This function takes several arguments: + +- magic_mask specifies what features that are NOT supported by the + following code. If a user attempts to use such a feature, + parse_pathspec() can reject it early. + +- flags specifies other things that the caller wants parse_pathspec to + perform. + +- prefix and args come from cmd_* functions + +get_pathspec() is obsolete and should never be used in new code. + +parse_pathspec() helps catch unsupported features and reject them +politely. At a lower level, different pathspec-related functions may +not support the same set of features. Such pathspec-sensitive +functions are guarded with GUARD_PATHSPEC(), which will die in an +unfriendly way when an unsupported feature is requested. + +The command designers are supposed to make sure that GUARD_PATHSPEC() +never dies. They have to make sure all unsupported features are caught +by parse_pathspec(), not by GUARD_PATHSPEC. grepping GUARD_PATHSPEC() +should give the designers all pathspec-sensitive codepaths and what +features they support. + +A similar process is applied when a new pathspec magic is added. The +designer lifts the GUARD_PATHSPEC restriction in the functions that +support the new magic. At the same time (s)he has to make sure this +new feature will be caught at parse_pathspec() in commands that cannot +handle the new magic in some cases. grepping parse_pathspec() should +help. diff --git a/Documentation/technical/http-protocol.txt b/Documentation/technical/http-protocol.txt new file mode 100644 index 0000000000..caf941a1c5 --- /dev/null +++ b/Documentation/technical/http-protocol.txt @@ -0,0 +1,503 @@ +HTTP transfer protocols +======================= + +Git supports two HTTP based transfer protocols. A "dumb" protocol +which requires only a standard HTTP server on the server end of the +connection, and a "smart" protocol which requires a Git aware CGI +(or server module). This document describes both protocols. + +As a design feature smart clients can automatically upgrade "dumb" +protocol URLs to smart URLs. This permits all users to have the +same published URL, and the peers automatically select the most +efficient transport available to them. + + +URL Format +---------- + +URLs for Git repositories accessed by HTTP use the standard HTTP +URL syntax documented by RFC 1738, so they are of the form: + + http://<host>:<port>/<path>?<searchpart> + +Within this documentation the placeholder $GIT_URL will stand for +the http:// repository URL entered by the end-user. + +Servers SHOULD handle all requests to locations matching $GIT_URL, as +both the "smart" and "dumb" HTTP protocols used by Git operate +by appending additional path components onto the end of the user +supplied $GIT_URL string. + +An example of a dumb client requesting for a loose object: + + $GIT_URL: http://example.com:8080/git/repo.git + URL request: http://example.com:8080/git/repo.git/objects/d0/49f6c27a2244e12041955e262a404c7faba355 + +An example of a smart request to a catch-all gateway: + + $GIT_URL: http://example.com/daemon.cgi?svc=git&q= + URL request: http://example.com/daemon.cgi?svc=git&q=/info/refs&service=git-receive-pack + +An example of a request to a submodule: + + $GIT_URL: http://example.com/git/repo.git/path/submodule.git + URL request: http://example.com/git/repo.git/path/submodule.git/info/refs + +Clients MUST strip a trailing '/', if present, from the user supplied +$GIT_URL string to prevent empty path tokens ('//') from appearing +in any URL sent to a server. Compatible clients MUST expand +'$GIT_URL/info/refs' as 'foo/info/refs' and not 'foo//info/refs'. + + +Authentication +-------------- + +Standard HTTP authentication is used if authentication is required +to access a repository, and MAY be configured and enforced by the +HTTP server software. + +Because Git repositories are accessed by standard path components +server administrators MAY use directory based permissions within +their HTTP server to control repository access. + +Clients SHOULD support Basic authentication as described by RFC 2616. +Servers SHOULD support Basic authentication by relying upon the +HTTP server placed in front of the Git server software. + +Servers SHOULD NOT require HTTP cookies for the purposes of +authentication or access control. + +Clients and servers MAY support other common forms of HTTP based +authentication, such as Digest authentication. + + +SSL +--- + +Clients and servers SHOULD support SSL, particularly to protect +passwords when relying on Basic HTTP authentication. + + +Session State +------------- + +The Git over HTTP protocol (much like HTTP itself) is stateless +from the perspective of the HTTP server side. All state MUST be +retained and managed by the client process. This permits simple +round-robin load-balancing on the server side, without needing to +worry about state management. + +Clients MUST NOT require state management on the server side in +order to function correctly. + +Servers MUST NOT require HTTP cookies in order to function correctly. +Clients MAY store and forward HTTP cookies during request processing +as described by RFC 2616 (HTTP/1.1). Servers SHOULD ignore any +cookies sent by a client. + + +General Request Processing +-------------------------- + +Except where noted, all standard HTTP behavior SHOULD be assumed +by both client and server. This includes (but is not necessarily +limited to): + +If there is no repository at $GIT_URL, or the resource pointed to by a +location matching $GIT_URL does not exist, the server MUST NOT respond +with '200 OK' response. A server SHOULD respond with +'404 Not Found', '410 Gone', or any other suitable HTTP status code +which does not imply the resource exists as requested. + +If there is a repository at $GIT_URL, but access is not currently +permitted, the server MUST respond with the '403 Forbidden' HTTP +status code. + +Servers SHOULD support both HTTP 1.0 and HTTP 1.1. +Servers SHOULD support chunked encoding for both request and response +bodies. + +Clients SHOULD support both HTTP 1.0 and HTTP 1.1. +Clients SHOULD support chunked encoding for both request and response +bodies. + +Servers MAY return ETag and/or Last-Modified headers. + +Clients MAY revalidate cached entities by including If-Modified-Since +and/or If-None-Match request headers. + +Servers MAY return '304 Not Modified' if the relevant headers appear +in the request and the entity has not changed. Clients MUST treat +'304 Not Modified' identical to '200 OK' by reusing the cached entity. + +Clients MAY reuse a cached entity without revalidation if the +Cache-Control and/or Expires header permits caching. Clients and +servers MUST follow RFC 2616 for cache controls. + + +Discovering References +---------------------- + +All HTTP clients MUST begin either a fetch or a push exchange by +discovering the references available on the remote repository. + +Dumb Clients +~~~~~~~~~~~~ + +HTTP clients that only support the "dumb" protocol MUST discover +references by making a request for the special info/refs file of +the repository. + +Dumb HTTP clients MUST make a GET request to $GIT_URL/info/refs, +without any search/query parameters. + + C: GET $GIT_URL/info/refs HTTP/1.0 + + S: 200 OK + S: + S: 95dcfa3633004da0049d3d0fa03f80589cbcaf31 refs/heads/maint + S: d049f6c27a2244e12041955e262a404c7faba355 refs/heads/master + S: 2cb58b79488a98d2721cea644875a8dd0026b115 refs/tags/v1.0 + S: a3c2e2402b99163d1d59756e5f207ae21cccba4c refs/tags/v1.0^{} + +The Content-Type of the returned info/refs entity SHOULD be +"text/plain; charset=utf-8", but MAY be any content type. +Clients MUST NOT attempt to validate the returned Content-Type. +Dumb servers MUST NOT return a return type starting with +"application/x-git-". + +Cache-Control headers MAY be returned to disable caching of the +returned entity. + +When examining the response clients SHOULD only examine the HTTP +status code. Valid responses are '200 OK', or '304 Not Modified'. + +The returned content is a UNIX formatted text file describing +each ref and its known value. The file SHOULD be sorted by name +according to the C locale ordering. The file SHOULD NOT include +the default ref named 'HEAD'. + + info_refs = *( ref_record ) + ref_record = any_ref / peeled_ref + + any_ref = obj-id HTAB refname LF + peeled_ref = obj-id HTAB refname LF + obj-id HTAB refname "^{}" LF + +Smart Clients +~~~~~~~~~~~~~ + +HTTP clients that support the "smart" protocol (or both the +"smart" and "dumb" protocols) MUST discover references by making +a parameterized request for the info/refs file of the repository. + +The request MUST contain exactly one query parameter, +'service=$servicename', where $servicename MUST be the service +name the client wishes to contact to complete the operation. +The request MUST NOT contain additional query parameters. + + C: GET $GIT_URL/info/refs?service=git-upload-pack HTTP/1.0 + + dumb server reply: + S: 200 OK + S: + S: 95dcfa3633004da0049d3d0fa03f80589cbcaf31 refs/heads/maint + S: d049f6c27a2244e12041955e262a404c7faba355 refs/heads/master + S: 2cb58b79488a98d2721cea644875a8dd0026b115 refs/tags/v1.0 + S: a3c2e2402b99163d1d59756e5f207ae21cccba4c refs/tags/v1.0^{} + + smart server reply: + S: 200 OK + S: Content-Type: application/x-git-upload-pack-advertisement + S: Cache-Control: no-cache + S: + S: 001e# service=git-upload-pack\n + S: 004895dcfa3633004da0049d3d0fa03f80589cbcaf31 refs/heads/maint\0multi_ack\n + S: 0042d049f6c27a2244e12041955e262a404c7faba355 refs/heads/master\n + S: 003c2cb58b79488a98d2721cea644875a8dd0026b115 refs/tags/v1.0\n + S: 003fa3c2e2402b99163d1d59756e5f207ae21cccba4c refs/tags/v1.0^{}\n + +Dumb Server Response +^^^^^^^^^^^^^^^^^^^^ +Dumb servers MUST respond with the dumb server reply format. + +See the prior section under dumb clients for a more detailed +description of the dumb server response. + +Smart Server Response +^^^^^^^^^^^^^^^^^^^^^ +If the server does not recognize the requested service name, or the +requested service name has been disabled by the server administrator, +the server MUST respond with the '403 Forbidden' HTTP status code. + +Otherwise, smart servers MUST respond with the smart server reply +format for the requested service name. + +Cache-Control headers SHOULD be used to disable caching of the +returned entity. + +The Content-Type MUST be 'application/x-$servicename-advertisement'. +Clients SHOULD fall back to the dumb protocol if another content +type is returned. When falling back to the dumb protocol clients +SHOULD NOT make an additional request to $GIT_URL/info/refs, but +instead SHOULD use the response already in hand. Clients MUST NOT +continue if they do not support the dumb protocol. + +Clients MUST validate the status code is either '200 OK' or +'304 Not Modified'. + +Clients MUST validate the first five bytes of the response entity +matches the regex "^[0-9a-f]{4}#". If this test fails, clients +MUST NOT continue. + +Clients MUST parse the entire response as a sequence of pkt-line +records. + +Clients MUST verify the first pkt-line is "# service=$servicename". +Servers MUST set $servicename to be the request parameter value. +Servers SHOULD include an LF at the end of this line. +Clients MUST ignore an LF at the end of the line. + +Servers MUST terminate the response with the magic "0000" end +pkt-line marker. + +The returned response is a pkt-line stream describing each ref and +its known value. The stream SHOULD be sorted by name according to +the C locale ordering. The stream SHOULD include the default ref +named 'HEAD' as the first ref. The stream MUST include capability +declarations behind a NUL on the first ref. + + smart_reply = PKT-LINE("# service=$servicename" LF) + ref_list + "0000" + ref_list = empty_list / non_empty_list + + empty_list = PKT-LINE(zero-id SP "capabilities^{}" NUL cap-list LF) + + non_empty_list = PKT-LINE(obj-id SP name NUL cap_list LF) + *ref_record + + cap-list = capability *(SP capability) + capability = 1*(LC_ALPHA / DIGIT / "-" / "_") + LC_ALPHA = %x61-7A + + ref_record = any_ref / peeled_ref + any_ref = PKT-LINE(obj-id SP name LF) + peeled_ref = PKT-LINE(obj-id SP name LF) + PKT-LINE(obj-id SP name "^{}" LF + +Smart Service git-upload-pack +------------------------------ +This service reads from the repository pointed to by $GIT_URL. + +Clients MUST first perform ref discovery with +'$GIT_URL/info/refs?service=git-upload-pack'. + + C: POST $GIT_URL/git-upload-pack HTTP/1.0 + C: Content-Type: application/x-git-upload-pack-request + C: + C: 0032want 0a53e9ddeaddad63ad106860237bbf53411d11a7\n + C: 0032have 441b40d833fdfa93eb2908e52742248faf0ee993\n + C: 0000 + + S: 200 OK + S: Content-Type: application/x-git-upload-pack-result + S: Cache-Control: no-cache + S: + S: ....ACK %s, continue + S: ....NAK + +Clients MUST NOT reuse or revalidate a cached reponse. +Servers MUST include sufficient Cache-Control headers +to prevent caching of the response. + +Servers SHOULD support all capabilities defined here. + +Clients MUST send at least one 'want' command in the request body. +Clients MUST NOT reference an id in a 'want' command which did not +appear in the response obtained through ref discovery unless the +server advertises capability "allow-tip-sha1-in-want". + + compute_request = want_list + have_list + request_end + request_end = "0000" / "done" + + want_list = PKT-LINE(want NUL cap_list LF) + *(want_pkt) + want_pkt = PKT-LINE(want LF) + want = "want" SP id + cap_list = *(SP capability) SP + + have_list = *PKT-LINE("have" SP id LF) + +TODO: Document this further. +TODO: Don't use uppercase for variable names below. + +The Negotiation Algorithm +~~~~~~~~~~~~~~~~~~~~~~~~~ +The computation to select the minimal pack proceeds as follows +(c = client, s = server): + + init step: + (c) Use ref discovery to obtain the advertised refs. + (c) Place any object seen into set ADVERTISED. + + (c) Build an empty set, COMMON, to hold the objects that are later + determined to be on both ends. + (c) Build a set, WANT, of the objects from ADVERTISED the client + wants to fetch, based on what it saw during ref discovery. + + (c) Start a queue, C_PENDING, ordered by commit time (popping newest + first). Add all client refs. When a commit is popped from + the queue its parents SHOULD be automatically inserted back. + Commits MUST only enter the queue once. + + one compute step: + (c) Send one $GIT_URL/git-upload-pack request: + + C: 0032want <WANT #1>............................... + C: 0032want <WANT #2>............................... + .... + C: 0032have <COMMON #1>............................. + C: 0032have <COMMON #2>............................. + .... + C: 0032have <HAVE #1>............................... + C: 0032have <HAVE #2>............................... + .... + C: 0000 + + The stream is organized into "commands", with each command + appearing by itself in a pkt-line. Within a command line + the text leading up to the first space is the command name, + and the remainder of the line to the first LF is the value. + Command lines are terminated with an LF as the last byte of + the pkt-line value. + + Commands MUST appear in the following order, if they appear + at all in the request stream: + + * want + * have + + The stream is terminated by a pkt-line flush ("0000"). + + A single "want" or "have" command MUST have one hex formatted + SHA-1 as its value. Multiple SHA-1s MUST be sent by sending + multiple commands. + + The HAVE list is created by popping the first 32 commits + from C_PENDING. Less can be supplied if C_PENDING empties. + + If the client has sent 256 HAVE commits and has not yet + received one of those back from S_COMMON, or the client has + emptied C_PENDING it SHOULD include a "done" command to let + the server know it won't proceed: + + C: 0009done + + (s) Parse the git-upload-pack request: + + Verify all objects in WANT are directly reachable from refs. + + The server MAY walk backwards through history or through + the reflog to permit slightly stale requests. + + If no WANT objects are received, send an error: + +TODO: Define error if no want lines are requested. + + If any WANT object is not reachable, send an error: + +TODO: Define error if an invalid want is requested. + + Create an empty list, S_COMMON. + + If 'have' was sent: + + Loop through the objects in the order supplied by the client. + For each object, if the server has the object reachable from + a ref, add it to S_COMMON. If a commit is added to S_COMMON, + do not add any ancestors, even if they also appear in HAVE. + + (s) Send the git-upload-pack response: + + If the server has found a closed set of objects to pack or the + request ends with "done", it replies with the pack. + +TODO: Document the pack based response + S: PACK... + + The returned stream is the side-band-64k protocol supported + by the git-upload-pack service, and the pack is embedded into + stream 1. Progress messages from the server side MAY appear + in stream 2. + + Here a "closed set of objects" is defined to have at least + one path from every WANT to at least one COMMON object. + + If the server needs more information, it replies with a + status continue response: + +TODO: Document the non-pack response + + (c) Parse the upload-pack response: + +TODO: Document parsing response + + Do another compute step. + + +Smart Service git-receive-pack +------------------------------ +This service reads from the repository pointed to by $GIT_URL. + +Clients MUST first perform ref discovery with +'$GIT_URL/info/refs?service=git-receive-pack'. + + C: POST $GIT_URL/git-receive-pack HTTP/1.0 + C: Content-Type: application/x-git-receive-pack-request + C: + C: ....0a53e9ddeaddad63ad106860237bbf53411d11a7 441b40d833fdfa93eb2908e52742248faf0ee993 refs/heads/maint\0 report-status + C: 0000 + C: PACK.... + + S: 200 OK + S: Content-Type: application/x-git-receive-pack-result + S: Cache-Control: no-cache + S: + S: .... + +Clients MUST NOT reuse or revalidate a cached reponse. +Servers MUST include sufficient Cache-Control headers +to prevent caching of the response. + +Servers SHOULD support all capabilities defined here. + +Clients MUST send at least one command in the request body. +Within the command portion of the request body clients SHOULD send +the id obtained through ref discovery as old_id. + + update_request = command_list + "PACK" <binary data> + + command_list = PKT-LINE(command NUL cap_list LF) + *(command_pkt) + command_pkt = PKT-LINE(command LF) + cap_list = *(SP capability) SP + + command = create / delete / update + create = zero-id SP new_id SP name + delete = old_id SP zero-id SP name + update = old_id SP new_id SP name + +TODO: Document this further. + + +References +---------- + +link:http://www.ietf.org/rfc/rfc1738.txt[RFC 1738: Uniform Resource Locators (URL)] +link:http://www.ietf.org/rfc/rfc2616.txt[RFC 2616: Hypertext Transfer Protocol -- HTTP/1.1] +link:technical/pack-protocol.html +link:technical/protocol-capabilities.html diff --git a/Documentation/technical/pack-heuristics.txt b/Documentation/technical/pack-heuristics.txt index 8b7ae1c140..b7bd95152e 100644 --- a/Documentation/technical/pack-heuristics.txt +++ b/Documentation/technical/pack-heuristics.txt @@ -366,12 +366,6 @@ been detailed! <linus> Yes, we always write out most recent first -For the other record: - - <pasky> njs`: http://pastebin.com/547965 - -The 'net never forgets, so that should be good until the end of time. - <njs`> And, yeah, I got the part about deeper-in-history stuff having worse IO characteristics, one sort of doesn't care. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index fe723e4722..cbb01a1ea2 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1,6 +1,5 @@ -Git User's Manual (for version 1.5.3 or newer) -______________________________________________ - +Git User Manual +_______________ Git is a fast distributed revision control system. @@ -220,7 +219,7 @@ of development leading to that point. The best way to see how this works is using the linkgit:gitk[1] command; running gitk now on a Git repository and looking for merge -commits will help understand how the Git organizes history. +commits will help understand how Git organizes history. In the following, we say that commit X is "reachable" from commit Y if commit X is an ancestor of commit Y. Equivalently, you could say @@ -269,27 +268,23 @@ Creating, deleting, and modifying branches is quick and easy; here's a summary of the commands: `git branch`:: - list all branches + list all branches. `git branch <branch>`:: create a new branch named `<branch>`, referencing the same - point in history as the current branch + point in history as the current branch. `git branch <branch> <start-point>`:: create a new branch named `<branch>`, referencing `<start-point>`, which may be specified any way you like, - including using a branch name or a tag name + including using a branch name or a tag name. `git branch -d <branch>`:: - delete the branch `<branch>`; if the branch you are deleting - points to a commit which is not reachable from the current - branch, this command will fail with a warning. + delete the branch `<branch>`; if the branch is not fully + merged in its upstream branch or contained in the current branch, + this command will fail with a warning. `git branch -D <branch>`:: - even if the branch points to a commit not reachable - from the current branch, you may know that that commit - is still reachable from some other branch or tag. In that - case it is safe to use this command to force Git to delete - the branch. + delete the branch `<branch>` irrespective of its merged status. `git checkout <branch>`:: make the current branch `<branch>`, updating the working - directory to reflect the version referenced by `<branch>` + directory to reflect the version referenced by `<branch>`. `git checkout -b <new> <start-point>`:: create a new branch `<new>` referencing `<start-point>`, and check it out. @@ -313,10 +308,17 @@ referenced by a tag: ------------------------------------------------ $ git checkout v2.6.17 -Note: moving to "v2.6.17" which isn't a local branch -If you want to create a new branch from this checkout, you may do so -(now or later) by using -b with the checkout command again. Example: - git checkout -b <new_branch_name> +Note: checking out 'v2.6.17'. + +You are in 'detached HEAD' state. You can look around, make experimental +changes and commit them, and you can discard any commits you make in this +state without impacting any branches by performing another checkout. + +If you want to create a new branch to retain commits you create, you may +do so (now or later) by using -b with the checkout command again. Example: + + git checkout -b new_branch_name + HEAD is now at 427abfa... Linux v2.6.17 ------------------------------------------------ @@ -327,7 +329,7 @@ and git branch shows that you are no longer on a branch: $ cat .git/HEAD 427abfa28afedffadfca9dd8b067eb6d36bac53f $ git branch -* (no branch) +* (detached from v2.6.17) master ------------------------------------------------ @@ -787,7 +789,7 @@ e05db0fd4f31dde7005f075a84f96b360d05984b ------------------------------------------------- Or you could recall that the `...` operator selects all commits -contained reachable from either one reference or the other but not +reachable from either one reference or the other but not both; so ------------------------------------------------- @@ -814,7 +816,7 @@ You could just visually inspect the commits since e05db0fd: $ gitk e05db0fd.. ------------------------------------------------- -Or you can use linkgit:git-name-rev[1], which will give the commit a +or you can use linkgit:git-name-rev[1], which will give the commit a name based on any tag it finds pointing to one of the commit's descendants: @@ -858,8 +860,8 @@ because it outputs only commits that are not reachable from v1.5.0-rc1. As yet another alternative, the linkgit:git-show-branch[1] command lists the commits reachable from its arguments with a display on the left-hand -side that indicates which arguments that commit is reachable from. So, -you can run something like +side that indicates which arguments that commit is reachable from. +So, if you run something like ------------------------------------------------- $ git show-branch e05db0fd v1.5.0-rc0 v1.5.0-rc1 v1.5.0-rc2 @@ -871,15 +873,15 @@ available ... ------------------------------------------------- -then search for a line that looks like +then a line like ------------------------------------------------- + ++ [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if available ------------------------------------------------- -Which shows that e05db0fd is reachable from itself, from v1.5.0-rc1, and -from v1.5.0-rc2, but not from v1.5.0-rc0. +shows that e05db0fd is reachable from itself, from v1.5.0-rc1, +and from v1.5.0-rc2, and not from v1.5.0-rc0. [[showing-commits-unique-to-a-branch]] Showing commits unique to a given branch @@ -1074,19 +1076,13 @@ produce no output at that point. Modifying the index is easy: -To update the index with the new contents of a modified file, use - -------------------------------------------------- -$ git add path/to/file -------------------------------------------------- - -To add the contents of a new file to the index, use +To update the index with the contents of a new or modified file, use ------------------------------------------------- $ git add path/to/file ------------------------------------------------- -To remove a file from the index and from the working tree, +To remove a file from the index and from the working tree, use ------------------------------------------------- $ git rm path/to/file @@ -1787,7 +1783,7 @@ $ git pull . branch $ git merge branch ------------------------------------------------- -are roughly equivalent. The former is actually very commonly used. +are roughly equivalent. [[submitting-patches]] Submitting patches to a project @@ -1977,7 +1973,7 @@ $ git clone http://yourserver.com/~you/proj.git ------------------------------------------------- (See also -link:howto/setup-git-server-over-http.txt[setup-git-server-over-http] +link:howto/setup-git-server-over-http.html[setup-git-server-over-http] for a slightly more sophisticated setup using WebDAV which also allows pushing over HTTP.) @@ -2249,11 +2245,11 @@ commit to this branch. $ ... patch ... test ... commit [ ... patch ... test ... commit ]* ------------------------------------------------- -When you are happy with the state of this change, you can pull it into the +When you are happy with the state of this change, you can merge it into the "test" branch in preparation to make it public: ------------------------------------------------- -$ git checkout test && git pull . speed-up-spinlocks +$ git checkout test && git merge speed-up-spinlocks ------------------------------------------------- It is unlikely that you would have any conflicts here ... but you might if you @@ -2265,7 +2261,7 @@ see the value of keeping each patch (or patch series) in its own branch. It means that the patches can be moved into the `release` tree in any order. ------------------------------------------------- -$ git checkout release && git pull . speed-up-spinlocks +$ git checkout release && git merge speed-up-spinlocks ------------------------------------------------- After a while, you will have a number of branches, and despite the @@ -3191,23 +3187,21 @@ those "loose" objects. You can save space and make Git faster by moving these loose objects in to a "pack file", which stores a group of objects in an efficient compressed format; the details of how pack files are formatted can be -found in link:technical/pack-format.txt[technical/pack-format.txt]. +found in link:technical/pack-format.html[pack format]. To put the loose objects into a pack, just run git repack: ------------------------------------------------ $ git repack -Generating pack... -Done counting 6020 objects. -Deltifying 6020 objects. - 100% (6020/6020) done -Writing 6020 objects. - 100% (6020/6020) done -Total 6020, written 6020 (delta 4070), reused 0 (delta 0) -Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created. +Counting objects: 6020, done. +Delta compression using up to 4 threads. +Compressing objects: 100% (6020/6020), done. +Writing objects: 100% (6020/6020), done. +Total 6020 (delta 4070), reused 0 (delta 0) ------------------------------------------------ -You can then run +This creates a single "pack file" in .git/objects/pack/ +containing all currently unpacked objects. You can then run ------------------------------------------------ $ git prune @@ -3305,17 +3299,11 @@ state, you can just prune all unreachable objects: $ git prune ------------------------------------------------ -and they'll be gone. But you should only run `git prune` on a quiescent +and they'll be gone. (You should only run `git prune` on a quiescent repository--it's kind of like doing a filesystem fsck recovery: you don't want to do that while the filesystem is mounted. - -(The same is true of `git fsck` itself, btw, but since -`git fsck` never actually *changes* the repository, it just reports -on what it found, `git fsck` itself is never 'dangerous' to run. -Running it while somebody is actually changing the repository can cause -confusing and scary messages, but it won't actually do anything bad. In -contrast, running `git prune` while somebody is actively changing the -repository is a *BAD* idea). +`git prune` is designed not to cause any harm in such cases of concurrent +accesses to a repository but you might receive confusing or scary messages.) [[recovering-from-repository-corruption]] Recovering from repository corruption @@ -3538,7 +3526,7 @@ with Git 1.5.2 can look up the submodule commits in the repository and manually check them out; earlier versions won't recognize the submodules at all. -To see how submodule support works, create (for example) four example +To see how submodule support works, create four example repositories that can be used later as a submodule: ------------------------------------------------- @@ -3640,7 +3628,7 @@ working on a branch. ------------------------------------------------- $ git branch -* (no branch) +* (detached from d266b98) master ------------------------------------------------- @@ -3910,7 +3898,7 @@ fact that such a commit brings together ("merges") two or more previous states represented by other commits. In other words, while a "tree" represents a particular directory state -of a working directory, a "commit" represents that state in "time", +of a working directory, a "commit" represents that state in time, and explains how we got there. You create a commit object by giving it the tree that describes the @@ -3930,8 +3918,7 @@ save the note about that state, in practice we tend to just write the result to the file pointed at by `.git/HEAD`, so that we can always see what the last committed state was. -Here is an ASCII art by Jon Loeliger that illustrates how -various pieces fit together. +Here is a picture that illustrates how various pieces fit together: ------------ @@ -4010,27 +3997,26 @@ to see what the top commit was. Merging multiple trees ---------------------- -Git helps you do a three-way merge, which you can expand to n-way by -repeating the merge procedure arbitrary times until you finally -"commit" the state. The normal situation is that you'd only do one -three-way merge (two parents), and commit it, but if you like to, you -can do multiple parents in one go. +Git can help you perform a three-way merge, which can in turn be +used for a many-way merge by repeating the merge procedure several +times. The usual situation is that you only do one three-way merge +(reconciling two lines of history) and commit the result, but if +you like to, you can merge several branches in one go. -To do a three-way merge, you need the two sets of "commit" objects -that you want to merge, use those to find the closest common parent (a -third "commit" object), and then use those commit objects to find the -state of the directory ("tree" object) at these points. +To perform a three-way merge, you start with the two commits you +want to merge, find their closest common parent (a third commit), +and compare the trees corresponding to these three commits. -To get the "base" for the merge, you first look up the common parent -of two commits with +To get the "base" for the merge, look up the common parent of two +commits: ------------------------------------------------- $ git merge-base <commit1> <commit2> ------------------------------------------------- -which will return you the commit they are both based on. You should -now look up the "tree" objects of those commits, which you can easily -do with (for example) +This prints the name of a commit they are both based on. You should +now look up the tree objects of those commits, which you can easily +do with ------------------------------------------------- $ git cat-file commit <commitname> | head -1 @@ -4152,8 +4138,6 @@ about the data in the object. It's worth noting that the SHA-1 hash that is used to name the object is the hash of the original data plus this header, so `sha1sum` 'file' does not match the object name for 'file'. -(Historical note: in the dawn of the age of Git the hash -was the SHA-1 of the 'compressed' object.) As a result, the general consistency of an object can always be tested independently of the contents or the type of the object: all objects can |